54 files changed, 89835 insertions, 78502 deletions

diff --git a/resources/i18n/cs_CZ/cura.po b/resources/i18n/cs_CZ/cura.po
index d96d13234a..cfa91f6b3f 100644
--- a/resources/i18n/cs_CZ/cura.po
+++ b/resources/i18n/cs_CZ/cura.po
@@ -6,8 +6,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2021-12-17 21:07+0100\n"
 "Last-Translator: Miroslav Šustek <sustmidown@centrum.cz>\n"
 "Language-Team: DenyCZ <www.github.com/DenyCZ>\n"
@@ -18,1507 +18,276 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n>=2 && n<=4 ? 1 : 2);\n"
 "X-Generator: Poedit 3.0\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Nelze vytvořit archiv ze složky s uživatelskými daty: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Záloha"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Pokusil se obnovit zálohu Cura bez nutnosti správných dat nebo metadat."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Pokusil se obnovit zálohu Cura, která je vyšší než aktuální verze."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "Během obnovení zálohy Cura se vyskytly následující chyby:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Prosím synchronizujte před začátkem tisku materiálové profily s vašimi tiskárnami."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Byly nainstalovány nové materiály"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Synchronizovat materiály s tiskárnami"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "Zjistit více"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "Nelze uložit archiv s materiálem do {}:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Nepodařilo se uložit archiv s materiálem"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Neznámá chyba."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Výška podložky byla snížena kvůli hodnotě nastavení „Sekvence tisku“, aby se zabránilo kolizi rámu s tištěnými modely."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Podložka"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Doopravdy chcete odstranit {0}? Toto nelze vrátit zpět!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nepřepsáno"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Neznámý"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Níže uvedené tiskárny nelze připojit, protože jsou součástí skupiny"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Dostupné síťové tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Příprava"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Výchozí"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura profil"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Vlastní profily"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Všechny podporované typy ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Všechny soubory (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Vizuální"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Vizuální profil je navržen pro tisk vizuálních prototypů a modelů s cílem vysoké vizuální a povrchové kvality."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Technika"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Inženýrský profil je navržen pro tisk funkčních prototypů a koncových částí s cílem lepší přesnosti a bližších tolerancí."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Návrh"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Návrhový profil je navržen pro tisk počátečních prototypů a ověření koncepce s cílem podstatného zkrácení doby tisku."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Vlastní materiál"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Vlastní"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Přihlášení selhalo"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Hledám nové umístění pro objekt"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Hledám umístění"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Nemohu najít lokaci na podložce pro všechny objekty"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Nemohu najít umístění"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Nepodařilo se vytvořit archiv s materiály pro synchronizaci s tiskárnami."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Nepodařilo se načíst archiv s materiály pro synchronizaci s tiskárnami."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "Odpověď z Digital Factory se zdá být poškozená."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "Odpověď z Digital Factory postrádá důležité informace."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Nepodařilo se připojit k Digital Factory pro synchronizaci materiálů s některými z tiskáren."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Nepodařilo se připojit k Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Načítám zařízení..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Nastavuji preference..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Inicializuji aktivní zařízení..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Inicializuji správce zařízení..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Inicializuji prostor podložky..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Připravuji scénu..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Načítám rozhraní..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Inicializuji engine..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Současně lze načíst pouze jeden soubor G-kódu. Přeskočen import {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Varování"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Nelze otevřít žádný jiný soubor, když se načítá G kód. Přeskočen import {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Chyba"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Přeskočit"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Zavřít"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Další"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Dokončit"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Přidat"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Zrušit"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Skupina #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Vnější stěna"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Vnitřní stěna"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Skin"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Výplň"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Výplň podpor"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Rozhraní podpor"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Podpora"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Límec"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Hlavní věž"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Pohyb"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Retrakce"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Jiné"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "Poznámky k vydání nelze otevřít."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura nelze spustit"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p> <b> Jejda, Ultimaker Cura narazil na něco, co se nezdá být v pořádku. </p> </b>\n"
-"                     <p> Během spouštění jsme zaznamenali neodstranitelnou chybu. Bylo to pravděpodobně způsobeno některými nesprávnými konfiguračními soubory. Doporučujeme zálohovat a resetovat vaši konfiguraci. </p>\n"
-"                     <p> Zálohy najdete v konfigurační složce. </p>\n"
-"                     <p> Za účelem vyřešení problému nám prosím pošlete tento záznam pádu. </p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Poslat záznam o pádu do Ultimakeru"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Zobrazit podrobný záznam pádu"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Zobrazit složku s konfigurací"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Zálohovat a resetovat konfiguraci"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Záznam pádu"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p> <b> V Cuře došlo k závažné chybě. Zašlete nám prosím tento záznam pádu k vyřešení problému </p> </b>\n"
-"             <p> Použijte tlačítko „Odeslat zprávu“ k automatickému odeslání hlášení o chybě na naše servery </p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Systémové informace"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Neznámý"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Verze Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Jazyk Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "Jazyk operačního systému"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Platforma"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Verze Qt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "Verze PyQt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Neinicializováno<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>Verze OpenGL: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL Vendor: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL Renderer: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Stopování chyby"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Protokoly"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Odeslat záznam"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Nepodařilo se mi spustit nový proces přihlášení. Zkontrolujte, zda nějaký jiný již neběží."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Nelze se dostat na server účtu Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "Přihlášení selhalo"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "Poskytnutý stav není správný."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Vypršel časový limit při autentizaci se serverem s účty."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Při autorizaci této aplikace zadejte požadovaná oprávnění."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Při pokusu o přihlášení se stalo něco neočekávaného, zkuste to znovu."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Nelze přečíst odpověď."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Násobím a rozmisťuji objekty"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Umisťuji objekty"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Umisťuji objekt"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Nepodporovaný"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Výchozí"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Tryska"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Nastavení byla změněna, aby odpovídala aktuální dostupnosti extruderů:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Nastavení aktualizováno"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder(y) zakázány"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Soubor již existuje"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Soubor <filename>{0}</filename> již existuje. Opravdu jej chcete přepsat?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "Špatná cesta k souboru:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Nepodařilo se exportovat profil do <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Export profilu do <filename>{0}</filename> se nezdařil: Zapisovací zásuvný modul ohlásil chybu."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Exportován profil do <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Export úspěšný"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Nepodařilo se importovat profil z <filename>{0}</filename>: {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Nemohu přidat profil z <filename>{0}</filename> před tím, než je přidána tiskárna."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "V souboru <filename>{0}</filename> není k dispozici žádný vlastní profil"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Import profilu z <filename>{0}</filename> se nezdařil:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Tento profil <filename>{0}</filename> obsahuje nesprávná data, nemohl je importovat."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Import profilu z <filename>{0}</filename> se nezdařil:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "Úspěšně importován profil {0}."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "Soubor {0} neobsahuje žádný platný profil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Profil {0} má neznámý typ souboru nebo je poškozen."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Vlastní profil"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "V profilu chybí typ kvality."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Zatím neexistuje aktivní tiskárna."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "Nepovedlo se přidat profil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "Typ kvality '{0}' není kompatibilní s definicí '{1}' aktivního zařízení."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Varování: Profil není viditelný, protože typ kvality '{0}' není dostupný pro aktuální konfiguraci. Přepněte na kombinaci materiálu a trysky, která může být použita s tímto typem kvality."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Nastavení pro každý model"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Konfigurovat nastavení pro každý model"
+msgid "glTF Binary"
+msgstr "gITF binární soubor"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura profil"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Soubor X3D"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Nastala chyba při pokusu obnovit vaši zálohu."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Zálohy"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Nastala chyba při nahrávání vaší zálohy."
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Vytvářím zálohu..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Kompresovaný COLLADA Digital Asset Exchenge"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Nastala chyba při vytváření zálohy."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Nemohu načíst informace o aktualizaci."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Nahrávám vaši zálohu..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "K dispozici mohou být nové funkce nebo opravy chyb pro zařízení {machine_name}! Pokud jste tak už neučinili, je doporučeno zaktualizovat firmware vaší tiskárny na verzi {latest_version}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Vaše záloha byla úspěšně nahrána."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "Nový stabilní firmware je k dispozici pro %s"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Záloha překračuje maximální povolenou velikost soubor."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Jak aktualizovat"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Spravovat zálohy"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Nastavení zařízení"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blokovač podpor"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Vytvořit prostor ve kterém nejsou tištěny podpory."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Vyměnitelná jednotka"
+msgid "Monitor"
+msgstr "Monitorování"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Uložit na vyměnitelný disk"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Uložit na vyměnitelný disk {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Nejsou k dispozici žádné formáty souborů pro zápis!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Ukládám na vyměnitelný disk <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Ukládám"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Nemohu uložit na <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Při pokusu o zápis do zařízení {device} nebyl nalezen název souboru."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Nelze uložit na vyměnitelnou jednotku {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Chyba"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Ukládám na vyměnitelnou jednotku {0} jako {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Soubor uložen"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Vysunout"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Vysunout vyměnitelnou jednotku {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Vysunuto {0}. Nyní můžete bezpečně vyjmout jednotku."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Bezpečně vysunout hardware"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Nepodařilo se vysunout {0}. Jednotku může používat jiný program."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Aktualizovat firmware"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profily Cura 15.04"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Doporučeno"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Vlastní"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Projektový soubor <filename>{0}</filename> obsahuje neznámý typ zařízení <message>{1}</message>. Nelze importovat zařízení. Místo toho budou importovány modely."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Otevřít soubor s projektem"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Soubor projektu <filename>{0}</filename> je neočekávaně nedostupný: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Nepovedlo se otevřít soubor projektu"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "Soubor projektu <filename>{0}</filename> je poškozený: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Soubor projektu <filename>{0}</filename> je vytvořený profily, které jsou této verzi Ultimaker Cura neznámé."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Soubor 3MF"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Nemohu zapsat do UFP souboru:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Balíček ve formátu Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Soubor G-kódu"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Náhled"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Rentgenový pohled"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Zpracovávám vrstvy"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informace"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "Slicování selhalo na neočekávané chybě. Zvažte, prosím, nahlášení chyby v našem issue trackeru."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "Slicování selhalo"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Nahlásit chybu"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Nahlásit chybu v Ultimaker Cura issue trackeru."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Nelze slicovat s aktuálním materiálem, protože je nekompatibilní s vybraným strojem nebo konfigurací."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Nelze slicovat"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "S aktuálním nastavením nelze slicovat. Následující nastavení obsahuje chyby: {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Nelze slicovat kvůli některým nastavení jednotlivých modelů. Následující nastavení obsahuje chyby na jednom nebo více modelech: {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Nelze slicovat, protože hlavní věž nebo primární pozice jsou neplatné."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Nelze slicovat, protože jsou zde objekty asociované k zakázanému extruder %s."
+msgid "Warning"
+msgstr "Varování"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Zkontrolujte nastavení a zda vaše modely:\n"
-"- Vejdou se na pracovní prostor\n"
-"- Jsou přiřazeny k povolenému extruderu\n"
-"- Nejsou nastavené jako modifikační sítě"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Vyměnitelná jednotka"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "Soubor AMF"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Kompresovaný soubor G kódu"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Post Processing"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modifikovat G kód"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB tisk"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Tisk přes USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Tisk přes USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Připojeno přes USB"
+msgid "Ultimaker Format Package"
+msgstr "Balíček ve formátu Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Probíhá tisk přes USB, uzavření Cura tento tisk zastaví. Jsi si jistá?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Tisk stále probíhá. Cura nemůže spustit další tisk přes USB, dokud není předchozí tisk dokončen."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Probíhá tisk"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Příprava"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Zpracovávám G kód"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Podrobnosti G kódu"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Před odesláním souboru se ujistěte, že je g-kód vhodný pro vaši tiskárnu a konfiguraci tiskárny. Reprezentace g-kódu nemusí být přesná."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G soubor"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Obrázek JPG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Obrázek JPEG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Obrázek PNG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Obrázek BMP"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Obrázek GIF"
+msgid "Per Model Settings"
+msgstr "Nastavení pro každý model"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Vyrovnat podložku"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Konfigurovat nastavení pro každý model"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Vybrat vylepšení"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter nepodporuje textový mód."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Nemohu načíst informace o aktualizaci."
+msgid "Update Firmware"
+msgstr "Aktualizovat firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "K dispozici mohou být nové funkce nebo opravy chyb pro zařízení {machine_name}! Pokud jste tak už neučinili, je doporučeno zaktualizovat firmware vaší tiskárny na verzi {latest_version}."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "Nový stabilní firmware je k dispozici pro %s"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Jak aktualizovat"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "Nelze načíst ukázkový datový soubor."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "Než se změny projeví, musíte ukončit a restartovat {}."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchronizuji..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Zjištěny změny z vašeho účtu Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Chcete synchronizovat materiál a softwarové balíčky s vaším účtem?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchronizovat"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Odmítnout a odstranit z účtu"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Nepovedlo se stáhnout {} zásuvných modulů"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Odmítnout"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Přijmout"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Licenční ujednání zásuvného modulu"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter nepodporuje netextový mód."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Před exportem prosím připravte G-kód."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Když je aktivován síťový tisk, Cura přesně nezobrazuje vrstvy."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura zjistil materiálové profily, které ještě nebyly nainstalovány na hostitelské tiskárně skupiny {0}."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Pohled simulace"
+msgid "Sending materials to printer"
+msgstr "Odesílání materiálů do tiskárny"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Nic není zobrazeno, nejdříve musíte slicovat."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Pokoušíte se připojit k {0}, ale není hostitelem skupiny. Webovou stránku můžete navštívit a nakonfigurovat ji jako skupinového hostitele."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Žádné vrstvy k zobrazení"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Znovu nezobrazovat tuto zprávu"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Pohled vrstev"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Tisk přes síť"
+msgid "Not a group host"
+msgstr "Není hostem skupiny"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Tisk přes síť"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Konfigurovat skupinu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Připojeno přes síť"
+msgid "Sending Print Job"
+msgstr "Odesílám tiskovou úlohu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "zítra"
+msgid "Uploading print job to printer."
+msgstr "Nahrávám tiskovou úlohu do tiskárny."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "dnes"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "Fronta tiskových úloh je plná. Tiskárna nemůže přijmout další úlohu."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Připojit přes síť"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "Fronta je plná"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Počkejte, až bude odeslána aktuální úloha."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Chyba tisku"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Tisková úloha byla úspěšně odeslána do tiskárny."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Data poslána"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Pokoušíte se připojit k tiskárně, na které není spuštěna aplikace Ultimaker Connect. Aktualizujte tiskárnu na nejnovější firmware."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Aktualizujte vaší tiskárnu"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "Fronta tiskových úloh je plná. Tiskárna nemůže přijmout další úlohu."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "Fronta je plná"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Odesílám tiskovou úlohu"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Nahrávám tiskovou úlohu do tiskárny."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura zjistil materiálové profily, které ještě nebyly nainstalovány na hostitelské tiskárně skupiny {0}."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Odesílání materiálů do tiskárny"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Nemohu nahrát data do tiskárny."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Chyba sítě"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Pokoušíte se připojit k {0}, ale není hostitelem skupiny. Webovou stránku můžete navštívit a nakonfigurovat ji jako skupinového hostitele."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Není hostem skupiny"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Konfigurovat skupinu"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1528,53 +297,72 @@ msgstr ""
 "Vaše tiskárna <b>{printer_name}</b> může být připojena přes cloud.\n"
 " Spravujte vaši tiskovou frontu a sledujte tisk odkudkoliv připojením vaší tiskárny k Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "Jste připraveni na tisk přes cloud?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Začínáme"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "Zjistit více"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Tisknout přes cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Pokoušíte se připojit k tiskárně, na které není spuštěna aplikace Ultimaker Connect. Aktualizujte tiskárnu na nejnovější firmware."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Aktualizujte vaší tiskárnu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Nemohu nahrát data do tiskárny."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Chyba sítě"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Tisk přes síť"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Tisknout přes cloud"
+msgid "Print over network"
+msgstr "Tisk přes síť"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Připojen přes cloud"
+msgid "Connected over the network"
+msgstr "Připojeno přes síť"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Sledovat tisk"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "zítra"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Sledujte tisk v Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "dnes"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Při nahrávání tiskové úlohy došlo k chybě s neznámým kódem: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Připojit přes síť"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
@@ -1582,13 +370,13 @@ msgstr[0] "Z vašeho Ultimaker účtu byla detekována nová tiskárna"
 msgstr[1] "Z vašeho Ultimaker účtu byly detekovány nové tiskárny"
 msgstr[2] "Z vašeho Ultimaker účtu byly detekovány nové tiskárny"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Přidávám tiskárnu {name} ({model}) z vašeho účtu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1597,12 +385,12 @@ msgstr[0] "... a {0} další"
 msgstr[1] "... a {0} další"
 msgstr[2] "... a {0} dalších"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Tiskárny přidané z Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
@@ -1610,7 +398,7 @@ msgstr[0] "Pro tuto tiskárnu není připojení přes cloud dostupné"
 msgstr[1] "Pro tyto tiskárny není připojení přes cloud dostupné"
 msgstr[2] "Pro tyto tiskárny není připojení přes cloud dostupné"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
@@ -1618,52 +406,52 @@ msgstr[0] "Tato tiskárna není napojena na Digital Factory:"
 msgstr[1] "Tyto tiskárny nejsou napojeny na Digital Factory:"
 msgstr[2] "Tyto tiskárny nejsou napojeny na Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Chcete-li navázat spojení, navštivte {website_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Zachovat konfiguraci tiskárny"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Odstranit tiskárnu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "Tiskárna {printer_name} bude odebrána až do další synchronizace účtu."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Chcete-li tiskárnu {printer_name} trvale odebrat, navštivte {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Opravdu chcete tiskárnu {printer_name} dočasně odebrat?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Odstranit tiskárny?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1682,7 +470,7 @@ msgstr[2] ""
 "Chystáte se odebrat {0} tiskáren z Cury. Tuto akci nelze vrátit zpět.\n"
 "Doopravdy chcete pokračovat?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1691,1375 +479,1606 @@ msgstr ""
 "Chystáte se odebrat všechny tiskárny z Cury. Tuto akci nelze vrátit zpět.\n"
 "Doopravdy chcete pokračovat?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Tisknout přes cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Tisknout přes cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "gITF binární soubor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Připojen přes cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Sledovat tisk"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Sledujte tisk v Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Kompresovaný COLLADA Digital Asset Exchenge"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Při nahrávání tiskové úlohy došlo k chybě s neznámým kódem: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Asistent 3D modelu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "Zvýrazněné oblasti označují chybějící nebo vedlejší povrchy. Opravte váš model a otevřete jej znovu."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p> Jeden nebo více 3D modelů se nemusí tisknout optimálně kvůli velikosti modelu a konfiguraci materiálu: </p>\n"
+"<p> {model_names} </p>\n"
+"<p> Zjistěte, jak zajistit nejlepší možnou kvalitu a spolehlivost tisku. </p>\n"
+"<p> <a href=\"https://ultimaker.com/3D-model-assistant\"> Zobrazit průvodce kvalitou tisku </a> </p>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Když je aktivován síťový tisk, Cura přesně nezobrazuje vrstvy."
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Chyby modelu"
+msgid "Simulation View"
+msgstr "Pohled simulace"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Pevný pohled"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Nic není zobrazeno, nejdříve musíte slicovat."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Žádné vrstvy k zobrazení"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Znovu nezobrazovat tuto zprávu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Pohled vrstev"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter nepodporuje netextový mód."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Před exportem prosím připravte G-kód."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Soubor G-kódu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Chyba při zápisu 3mf file."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "Plugin 3MF Writer je poškozen."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Zatím neexistuje žádný pracovní prostor. Nejprve prosím přidejte tiskárnu."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Nemáte oprávnění zapisovat do tohoto pracovního prostoru."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "Operační systém nepovoluje uložit soubor s projektem do tohoto umístění nebo pod tímto názvem."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "Soubor 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Soubor Cura Project 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitorování"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Kompresovaný soubor G kódu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "Slicování selhalo na neočekávané chybě. Zvažte, prosím, nahlášení chyby v našem issue trackeru."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "Slicování selhalo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Nahlásit chybu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Nahlásit chybu v Ultimaker Cura issue trackeru."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Nelze slicovat s aktuálním materiálem, protože je nekompatibilní s vybraným strojem nebo konfigurací."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Asistent 3D modelu"
+msgid "Unable to slice"
+msgstr "Nelze slicovat"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "S aktuálním nastavením nelze slicovat. Následující nastavení obsahuje chyby: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Nelze slicovat kvůli některým nastavení jednotlivých modelů. Následující nastavení obsahuje chyby na jednom nebo více modelech: {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Nelze slicovat, protože hlavní věž nebo primární pozice jsou neplatné."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Nelze slicovat, protože jsou zde objekty asociované k zakázanému extruder %s."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p> Jeden nebo více 3D modelů se nemusí tisknout optimálně kvůli velikosti modelu a konfiguraci materiálu: </p>\n"
-"<p> {model_names} </p>\n"
-"<p> Zjistěte, jak zajistit nejlepší možnou kvalitu a spolehlivost tisku. </p>\n"
-"<p> <a href=\"https://ultimaker.com/3D-model-assistant\"> Zobrazit průvodce kvalitou tisku </a> </p>"
+"Zkontrolujte nastavení a zda vaše modely:\n"
+"- Vejdou se na pracovní prostor\n"
+"- Jsou přiřazeny k povolenému extruderu\n"
+"- Nejsou nastavené jako modifikační sítě"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Typ síťového modelu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Zpracovávám vrstvy"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Normální model"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informace"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Tisknout jako podporu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Soubor X3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Upravte nastavení překrývání"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Obrázek JPG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Nepodporovat překrývání"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Obrázek JPEG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Pouze síť výplně"
+msgid "PNG Image"
+msgstr "Obrázek PNG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Síť řezu"
+msgid "BMP Image"
+msgstr "Obrázek BMP"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Vybrat nastavení"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Obrázek GIF"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Vybrat nastavení k přizpůsobení pro tento model"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Tryska"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtrovat..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Projektový soubor <filename>{0}</filename> obsahuje neznámý typ zařízení <message>{1}</message>. Nelze importovat zařízení. Místo toho budou importovány modely."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Zobrazit vše"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Otevřít soubor s projektem"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura zálohy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Soubor projektu <filename>{0}</filename> je neočekávaně nedostupný: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura verze"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Nepovedlo se otevřít soubor projektu"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Zařízení"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "Soubor projektu <filename>{0}</filename> je poškozený: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiály"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Soubor projektu <filename>{0}</filename> je vytvořený profily, které jsou této verzi Ultimaker Cura neznámé."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profily"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Doporučeno"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Zásuvné moduly"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Vlastní"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Chcete více?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "Soubor 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Zálohovat nyní"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Nemohu zapsat do UFP souboru:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatické zálohy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profily Cura 15.04"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Automaticky vytvořte zálohu každý den, kdy je spuštěna Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Zálohy"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Obnovit"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Nastala chyba při nahrávání vaší zálohy."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Odstranit zálohu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Vytvářím zálohu..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Opravdu chcete tuto zálohu smazat? To nelze vrátit zpět."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Nastala chyba při vytváření zálohy."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Obnovit zálohu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Nahrávám vaši zálohu..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Před obnovením zálohy budete muset restartovat Curu. Chcete nyní Curu zavřít?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Vaše záloha byla úspěšně nahrána."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Zálohovat a synchronizovat vaše nastavení Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Záloha překračuje maximální povolenou velikost soubor."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Přihlásit se"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Spravovat zálohy"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Moje zálohy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Záloha"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Momentálně nemáte žádné zálohy. Pomocí tlačítka 'Zálohovat nyní' vytvořte."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Nastala chyba při pokusu obnovit vaši zálohu."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Během fáze náhledu budete omezeni na 5 viditelných záloh. Chcete-li zobrazit starší, odstraňte zálohu."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "Nelze načíst ukázkový datový soubor."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Nastavení tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter nepodporuje textový mód."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Šířka)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Post Processing"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modifikovat G kód"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Hloubka)"
+msgid "Support Blocker"
+msgstr "Blokovač podpor"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Výška)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Vytvořit prostor ve kterém nejsou tištěny podpory."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Tvar tiskové podložky"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Náhled"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Počátek ve středu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Rentgenový pohled"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Topná podložka"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Vyrovnat podložku"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Vyhřívaný objem sestavení"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Vybrat vylepšení"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Varianta G kódu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Nastavení tiskové hlavy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Výška rámu tiskárny"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Počet extrůderů"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Aplikovat offsety extruderu do G kódu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "Zvýrazněné oblasti označují chybějící nebo vedlejší povrchy. Opravte váš model a otevřete jej znovu."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Počáteční G kód"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Chyby modelu"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Ukončující G kód"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "Zjistit více"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Nastavení trysky"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Pevný pohled"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Velikost trysky"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Zpracovávám G kód"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Kompatibilní průměr materiálu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Podrobnosti G kódu"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "X offset trysky"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Před odesláním souboru se ujistěte, že je g-kód vhodný pro vaši tiskárnu a konfiguraci tiskárny. Reprezentace g-kódu nemusí být přesná."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Y offset trysky"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G soubor"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Číslo chladícího větráku"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Nastavení zařízení"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Počáteční G-kód extuderu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB tisk"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Ukončující G-kód extuderu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Tisk přes USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Tiskárna"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Tisk přes USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Aktualizovat firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Připojeno přes USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "Firmware je software běžící přímo na vaší 3D tiskárně. Tento firmware řídí krokové motory, reguluje teplotu a v konečném důsledku zajišťuje vaši práci tiskárny."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Probíhá tisk přes USB, uzavření Cura tento tisk zastaví. Jsi si jistá?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Tisk stále probíhá. Cura nemůže spustit další tisk přes USB, dokud není předchozí tisk dokončen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Probíhá tisk"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Načítám zařízení..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Nastavuji preference..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Inicializuji aktivní zařízení..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Inicializuji správce zařízení..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Inicializuji prostor podložky..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Připravuji scénu..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Načítám rozhraní..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Inicializuji engine..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Současně lze načíst pouze jeden soubor G-kódu. Přeskočen import {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Nelze otevřít žádný jiný soubor, když se načítá G kód. Přeskočen import {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "Dodávání firmwaru s novými tiskárnami funguje, ale nové verze mají obvykle více funkcí a vylepšení."
+msgid "Default"
+msgstr "Výchozí"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Automaticky aktualizovat firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Vizuální"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Nahrát vlastní firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Vizuální profil je navržen pro tisk vizuálních prototypů a modelů s cílem vysoké vizuální a povrchové kvality."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "Firmware nelze aktualizovat, protože není spojeno s tiskárnou."
+msgid "Engineering"
+msgstr "Technika"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Inženýrský profil je navržen pro tisk funkčních prototypů a koncových částí s cílem lepší přesnosti a bližších tolerancí."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "Firmware nelze aktualizovat, protože připojení k tiskárně nepodporuje aktualizaci firmwaru."
+msgid "Draft"
+msgstr "Návrh"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Vybrat vlastní firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Návrhový profil je navržen pro tisk počátečních prototypů a ověření koncepce s cílem podstatného zkrácení doby tisku."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Aktualizace firmwaru"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nepřepsáno"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Doopravdy chcete odstranit {0}? Toto nelze vrátit zpět!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Aktualizuji firmware."
+msgid "Unknown"
+msgstr "Neznámý"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Aktualizace firmwaru kompletní."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Níže uvedené tiskárny nelze připojit, protože jsou součástí skupiny"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Aktualizace firmwaru selhala kvůli neznámému problému."
+msgid "Available networked printers"
+msgstr "Dostupné síťové tiskárny"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Vypočítáno"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Prosím synchronizujte před začátkem tisku materiálové profily s vašimi tiskárnami."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Byly nainstalovány nové materiály"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Aktualizace firmwaru selhala kvůli chybě v komunikaci."
+msgid "Custom Material"
+msgstr "Vlastní materiál"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Aktualizace firmwaru selhala kvůli chybě vstupu / výstupu."
+msgid "Custom"
+msgstr "Vlastní"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Aktualizace firmwaru selhala kvůli chybějícímu firmwaru."
+msgid "Custom profiles"
+msgstr "Vlastní profily"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Otevřit projekt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Všechny podporované typy ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Aktualizovat existující"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Všechny soubory (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Vytvořit nový"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Nepodařilo se vytvořit archiv s materiály pro synchronizaci s tiskárnami."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Souhrn - Projekt Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Nepodařilo se načíst archiv s materiály pro synchronizaci s tiskárnami."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Nastavení tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "Odpověď z Digital Factory se zdá být poškozená."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Jak by měl být problém v zařízení vyřešen?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "Odpověď z Digital Factory postrádá důležité informace."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Typ"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Nepodařilo se připojit k Digital Factory pro synchronizaci materiálů s některými z tiskáren."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Skupina tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Nepodařilo se připojit k Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Nastavení profilu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Nelze vytvořit archiv ze složky s uživatelskými daty: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Jak by měl být problém v profilu vyřešen?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Pokusil se obnovit zálohu Cura bez nutnosti správných dat nebo metadat."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Název"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Pokusil se obnovit zálohu Cura, která je vyšší než aktuální verze."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Záměr"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "Během obnovení zálohy Cura se vyskytly následující chyby:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Není v profilu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Hledám nové umístění pro objekt"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 přepsání"
-msgstr[1] "%1 přepsání"
-msgstr[2] "%1 přepsání"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Hledám umístění"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivát z"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Nemohu najít lokaci na podložce pro všechny objekty"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 override"
-msgstr[1] "%1, %2 overrides"
-msgstr[2] "%1, %2 overrides"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Nemohu najít umístění"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Nastavení materiálu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Přihlášení selhalo"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Jak by měl být problém v materiálu vyřešen?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Vnější stěna"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Nastavení zobrazení"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Vnitřní stěna"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mód"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Skin"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Viditelná zařízení:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Výplň"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 z %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Výplň podpor"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Nahrání projektu vymaže všechny modely na podložce."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Rozhraní podpor"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Otevřít"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Podpora"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Zásuvný balíček Post Processing"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Límec"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Skripty Post Processingu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Hlavní věž"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Přidat skript"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Pohyb"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Retrakce"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Jiné"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Nastavení"
+msgid "Group #{group_nr}"
+msgstr "Skupina #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Změnít aktivní post-processing skripty."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "Poznámky k vydání nelze otevřít."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "Následují skript je aktivní:"
-msgstr[1] "Následují skripty jsou aktivní:"
-msgstr[2] "Následují skripty jsou aktivní:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Přeskočit"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Konvertovat obrázek.."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Zavřít"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Maximální vzdálenost každého pixelu od „základny“."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Přidat"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Výška (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Dokončit"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Výška základny od podložky v milimetrech."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Zrušit"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Základna (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Další"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Šířka podložky v milimetrech."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Výška podložky byla snížena kvůli hodnotě nastavení „Sekvence tisku“, aby se zabránilo kolizi rámu s tištěnými modely."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Šířka (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Podložka"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Hloubka podložky v milimetrech"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "Nelze uložit archiv s materiálem do {}:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Hloubka (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Nepodařilo se uložit archiv s materiálem"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "U litofanů by tmavé pixely měly odpovídat silnějším místům, aby blokovaly více světla procházejícího. Pro výškové mapy znamenají světlejší pixely vyšší terén, takže světlejší pixely by měly odpovídat silnějším umístěním v generovaném 3D modelu."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Neznámá chyba."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Tmavější je vyšší"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "Soubor již existuje"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Světlejší je vyšší"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Soubor <filename>{0}</filename> již existuje. Opravdu jej chcete přepsat?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Pro litofany je k dispozici jednoduchý logaritmický model pro průsvitnost. U výškových map odpovídají hodnoty pixelů lineárně výškám."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "Špatná cesta k souboru:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Lineární"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Nepodporovaný"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Průsvitnost"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Výchozí"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Procento světla pronikajícího do tisku o tloušťce 1 milimetr. Snížení této hodnoty zvyšuje kontrast v tmavých oblastech a snižuje kontrast ve světlých oblastech obrazu."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Nastavení byla změněna, aby odpovídala aktuální dostupnosti extruderů:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1mm propustnost (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Nastavení aktualizováno"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Množství vyhlazení, které se použije na obrázek."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder(y) zakázány"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Vyhlazování"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Nepodařilo se exportovat profil do <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Export profilu do <filename>{0}</filename> se nezdařil: Zapisovací zásuvný modul ohlásil chybu."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Vyberte prosím všechny upgrady provedené v tomto originálu Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Exportován profil do <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Vyhřívaná podložka (Oficiální kit, nebo vytvořená)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Export úspěšný"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Vyrovnávání podložky"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Nepodařilo se importovat profil z <filename>{0}</filename>: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Chcete-li se ujistit, že vaše výtisky vyjdou skvěle, můžete nyní sestavení své podložku. Když kliknete na „Přesunout na další pozici“, tryska se přesune do různých poloh, které lze upravit."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Nemohu přidat profil z <filename>{0}</filename> před tím, než je přidána tiskárna."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Pro každou pozici; vložte kousek papíru pod trysku a upravte výšku tiskové desky. Výška desky pro sestavení tisku je správná, když je papír lehce uchopen špičkou trysky."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "V souboru <filename>{0}</filename> není k dispozici žádný vlastní profil"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Spustit vyrovnání položky"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Import profilu z <filename>{0}</filename> se nezdařil:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Přesunout na další pozici"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Tento profil <filename>{0}</filename> obsahuje nesprávná data, nemohl je importovat."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Další informace o anonymním shromažďování údajů"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Import profilu z <filename>{0}</filename> se nezdařil:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu. Níže uvádíme příklad všech sdílených dat:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "Úspěšně importován profil {0}."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Nechci posílat anonymní data"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "Soubor {0} neobsahuje žádný platný profil."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Povolit zasílání anonymních dat"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Profil {0} má neznámý typ souboru nebo je poškozen."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Obchod"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Vlastní profil"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Než se změny v balíčcích projeví, budete muset restartovat Curu."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "V profilu chybí typ kvality."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Ukončit %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Zatím neexistuje aktivní tiskárna."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Nainstalovat"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "Nepovedlo se přidat profil."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Nainstalováno"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "Typ kvality '{0}' není kompatibilní s definicí '{1}' aktivního zařízení."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Varování: Profil není viditelný, protože typ kvality '{0}' není dostupný pro aktuální konfiguraci. Přepněte na kombinaci materiálu a trysky, která může být použita s tímto typem kvality."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Přejít na webový obchod"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Násobím a rozmisťuji objekty"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Hledat materiály"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Umisťuji objekty"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Kompatibilita"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Umisťuji objekt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Zařízení"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Nepodařilo se mi spustit nový proces přihlášení. Zkontrolujte, zda nějaký jiný již neběží."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Podložka"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Nelze se dostat na server účtu Ultimaker."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Podpora"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "Přihlášení selhalo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Kvalita"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Nelze přečíst odpověď."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Technický datasheet"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "Poskytnutý stav není správný."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Datasheet bezpečnosti"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Vypršel časový limit při autentizaci se serverem s účty."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Zásady tisku"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Při autorizaci této aplikace zadejte požadovaná oprávnění."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Webová stránka"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Při pokusu o přihlášení se stalo něco neočekávaného, zkuste to znovu."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "K instalaci nebo aktualizaci je vyžadováno <a href='%1'>přihlášení</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura nelze spustit"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Koupit cívky materiálu</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p> <b> Jejda, Ultimaker Cura narazil na něco, co se nezdá být v pořádku. </p> </b>\n"
+"                     <p> Během spouštění jsme zaznamenali neodstranitelnou chybu. Bylo to pravděpodobně způsobeno některými nesprávnými konfiguračními soubory. Doporučujeme zálohovat a resetovat vaši konfiguraci. </p>\n"
+"                     <p> Zálohy najdete v konfigurační složce. </p>\n"
+"                     <p> Za účelem vyřešení problému nám prosím pošlete tento záznam pádu. </p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Aktualizace"
+msgid "Send crash report to Ultimaker"
+msgstr "Poslat záznam o pádu do Ultimakeru"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Aktualizuji"
+msgid "Show detailed crash report"
+msgstr "Zobrazit podrobný záznam pádu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Aktualizování"
+msgid "Show configuration folder"
+msgstr "Zobrazit složku s konfigurací"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Zpět"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Zásuvné moduly"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiály"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Nainstalování"
+msgid "Backup and Reset Configuration"
+msgstr "Zálohovat a resetovat konfiguraci"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Nainstaluje se po restartu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Záznam pádu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "Pro aktualizace je potřeba se <a href='%1'>přihlásit</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p> <b> V Cuře došlo k závažné chybě. Zašlete nám prosím tento záznam pádu k vyřešení problému </p> </b>\n"
+"             <p> Použijte tlačítko „Odeslat zprávu“ k automatickému odeslání hlášení o chybě na naše servery </p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgrade"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Systémové informace"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Odinstalace"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Neznámý"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Soubory od komunity"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Verze Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Komunitní zásuvné moduly"
+msgid "Cura language"
+msgstr "Jazyk Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Obecné materiály"
+msgid "OS language"
+msgstr "Jazyk operačního systému"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Načítám balíčky..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Platforma"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Webová stránka"
+msgid "Qt version"
+msgstr "Verze Qt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "Email"
+msgid "PyQt version"
+msgstr "Verze PyQt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Přihlaste se, abyste získali ověřené pluginy a materiály pro Ultimaker Cura Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Verze"
+msgid "Not yet initialized<br/>"
+msgstr "Neinicializováno<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Naposledy aktualizování"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>Verze OpenGL: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Značka"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL Vendor: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Ke stažení"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Nainstalovaná rozšíření"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Stopování chyby"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Žádné rozšíření nebylo nainstalováno."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Protokoly"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Nainstalované materiály"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Odeslat záznam"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Žádný materiál nebyl nainstalován."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Zkontrolujte, zda má tiskárna připojení:\n"
+"- Zkontrolujte, zda je tiskárna zapnutá.\n"
+"- Zkontrolujte, zda je tiskárna připojena k síti.\n"
+"- Zkontrolujte, zda jste přihlášeni k objevování tiskáren připojených k cloudu."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Zabalená rozšíření"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Připojte tiskárnu k síti."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Zabalené materiály"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Zobrazit online manuály"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Nelze se připojit k databázi balíčku Cura. Zkontrolujte připojení."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Abyste mohli monitorovat tisk z Cury, připojte prosím tiskárnu."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Pro instalaci balíčku musíte přijmout licenční ujednání"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Vybrat nastavení k přizpůsobení pro tento model"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Změny z vašeho účtu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtrovat..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Schovat"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Zobrazit vše"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Další"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Typ síťového modelu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Následující balíčky byly přidány:"
+msgid "Normal model"
+msgstr "Normální model"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Následující balíčky nelze nainstalovat z důvodu nekompatibilní verze Cura:"
+msgid "Print as support"
+msgstr "Tisknout jako podporu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Potvrdit odinstalaci"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Upravte nastavení překrývání"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Odinstalujete materiály a / nebo profily, které se stále používají. Potvrzením resetujete následující materiály / profily na výchozí hodnoty."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "Nepodporovat překrývání"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiály"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Pouze síť výplně"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profily"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Síť řezu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Potvrdit"
+msgid "Select settings"
+msgstr "Vybrat nastavení"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Aktualizovat firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Barevné schéma"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "Firmware je software běžící přímo na vaší 3D tiskárně. Tento firmware řídí krokové motory, reguluje teplotu a v konečném důsledku zajišťuje vaši práci tiskárny."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Barva materiálu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "Dodávání firmwaru s novými tiskárnami funguje, ale nové verze mají obvykle více funkcí a vylepšení."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Typ úsečky"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Automaticky aktualizovat firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Rychlost"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Nahrát vlastní firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Tloušťka vrstvy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "Firmware nelze aktualizovat, protože není spojeno s tiskárnou."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Šířka čáry"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "Firmware nelze aktualizovat, protože připojení k tiskárně nepodporuje aktualizaci firmwaru."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Průtok"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Vybrat vlastní firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Mód kompatibility"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Aktualizace firmwaru"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Cesty"
+msgid "Updating firmware."
+msgstr "Aktualizuji firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Pomocníci"
+msgid "Firmware update completed."
+msgstr "Aktualizace firmwaru kompletní."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Shell"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Aktualizace firmwaru selhala kvůli neznámému problému."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Výplň"
+msgid "Firmware update failed due to an communication error."
+msgstr "Aktualizace firmwaru selhala kvůli chybě v komunikaci."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "Začátky"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Aktualizace firmwaru selhala kvůli chybě vstupu / výstupu."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Zobrazit jen vrchní vrstvy"
+msgid "Firmware update failed due to missing firmware."
+msgstr "Aktualizace firmwaru selhala kvůli chybějícímu firmwaru."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Zobrazit 5 podrobných vrstev nahoře"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Zrušeno"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Nahoře / Dole"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Dokončeno"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Vnitřní stěna"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Připravuji..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Ruším..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "max"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Selhání"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Pozastavuji..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Pozastaveno"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Obnovuji..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Akce vyžadována"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Dokončuji %1 z %2"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Spravovat tiskárnu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Sklo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Aktualizujte firmware tiskárny a spravujte frontu vzdáleně."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Vstup z webové kamery nemůže být pro cloudové tiskárny zobrazen v Ultimaker Cura. Klikněte na \"Spravovat tiskárnu\", abyste navštívili Ultimaker Digital Factory a zobrazili tuto webkameru."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Načítám..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Nedostupný"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Nedostupný"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Čekám"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Připravuji..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Tisknu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Bez názvu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonymní"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Jsou nutné změny v nastavení"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Podrobnosti"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Nedostupná tiskárna"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "První dostupný"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Zařazeno do fronty"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Spravovat v prohlížeči"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Ve frontě nejsou žádné tiskové úlohy. Slicujte a odesláním úlohy jednu přidejte."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Tiskové úlohy"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Celkový čas tisknutí"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Čekám na"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Tisk přes síť"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Tisk"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Výběr tiskárny"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Změny konfigurace"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Override"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
@@ -3067,705 +2086,1522 @@ msgstr[0] "Přiřazená tiskárna %1 vyžaduje následující změnu konfigurace
 msgstr[1] "Přiřazená tiskárna %1 vyžaduje následující změny akonfigurace:"
 msgstr[2] "Přiřazená tiskárna %1 vyžaduje následující změnu konfigurace:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "Tiskárna %1 je přiřazena, ale úloha obsahuje neznámou konfiguraci materiálu."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Změnit materiál %1 z %2 na %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "Načíst %3 jako materiál %1 (Toho nemůže být přepsáno)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Změnit jádro tisku %1 z %2 na %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Změnit podložku na %1 (Toto nemůže být přepsáno)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Přepsání použije zadaná nastavení s existující konfigurací tiskárny. To může vést k selhání tisku."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Hliník"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Dokončeno"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Ruším..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Zrušeno"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Selhání"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Pozastavuji..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Pozastaveno"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Obnovuji..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Tisk přes síť"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Akce vyžadována"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Tisk"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Dokončuji %1 z %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Výběr tiskárny"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Připojte se k síťové tiskárně"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Chcete-li tisknout přímo na tiskárně prostřednictvím sítě, zkontrolujte, zda je tiskárna připojena k síti pomocí síťového kabelu nebo připojením tiskárny k síti WIFI. Pokud nepřipojíte Curu k tiskárně, můžete stále používat jednotku USB k přenosu souborů g-kódu do vaší tiskárny."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Vyberte svou tiskárnu z nabídky níže:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Upravit"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Odstranit"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Aktualizovat"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Pokud vaše tiskárna není uvedena, přečtěte si <a href='%1'> průvodce řešením problémů se síťovým tiskem </a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Typ"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Verze firmwaru"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adresa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Tato tiskárna není nastavena tak, aby hostovala skupinu tiskáren."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Tato tiskárna je hostitelem skupiny tiskáren %1."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Tiskárna na této adrese dosud neodpověděla."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Připojit"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Špatná IP adresa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Prosím zadejte validní IP adresu."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Adresa tiskárny"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Vložte IP adresu vaší tiskárny na síti."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Nedostupná tiskárna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "První dostupný"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Přesunout nahoru"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Odstranit"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Obnovit"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Pozastavuji..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Obnovuji..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pozastavit"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Ruším..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Zrušit"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Doopravdy chcete posunout %1 na začátek fronty?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Přesunout tiskovou úlohu nahoru"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Doopravdy chcete odstranit %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Odstranit tiskovou úlohu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Doopravdy chcete zrušit %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Zrušit tisk"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "Zařazeno do fronty"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Spravovat v prohlížeči"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Ve frontě nejsou žádné tiskové úlohy. Slicujte a odesláním úlohy jednu přidejte."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Tiskové úlohy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Celkový čas tisknutí"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Čekám na"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Barevné schéma"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Barva materiálu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Typ úsečky"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Rychlost"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Tloušťka vrstvy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Šířka čáry"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Průtok"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Mód kompatibility"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Cesty"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Pomocníci"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Shell"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Výplň"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "Začátky"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Zobrazit jen vrchní vrstvy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Zobrazit 5 podrobných vrstev nahoře"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Nahoře / Dole"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Vnitřní stěna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "min"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "max"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Zkontrolujte, zda má tiskárna připojení:\n"
-"- Zkontrolujte, zda je tiskárna zapnutá.\n"
-"- Zkontrolujte, zda je tiskárna připojena k síti.\n"
-"- Zkontrolujte, zda jste přihlášeni k objevování tiskáren připojených k cloudu."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Připojte tiskárnu k síti."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Výška (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Zobrazit online manuály"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Maximální vzdálenost každého pixelu od „základny“."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Abyste mohli monitorovat tisk z Cury, připojte prosím tiskárnu."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Základna (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Některé věci mohou být v tomto tisku problematické. Kliknutím zobrazíte tipy pro úpravy."
+msgid "The base height from the build plate in millimeters."
+msgstr "Výška základny od podložky v milimetrech."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Šířka (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D Pohled"
+msgid "The width in millimeters on the build plate"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Hloubka (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Přední pohled"
+msgid "The depth in millimeters on the build plate"
+msgstr "Hloubka podložky v milimetrech"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Tmavější je vyšší"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Světlejší je vyšší"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Pohled seshora"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "U litofanů by tmavé pixely měly odpovídat silnějším místům, aby blokovaly více světla procházejícího. Pro výškové mapy znamenají světlejší pixely vyšší terén, takže světlejší pixely by měly odpovídat silnějším umístěním v generovaném 3D modelu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Lineární"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Průsvitnost"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Pohled zleva"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Pro litofany je k dispozici jednoduchý logaritmický model pro průsvitnost. U výškových map odpovídají hodnoty pixelů lineárně výškám."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1mm propustnost (%)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Pohled zprava"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Procento světla pronikajícího do tisku o tloušťce 1 milimetr. Snížení této hodnoty zvyšuje kontrast v tmavých oblastech a snižuje kontrast ve světlých oblastech obrazu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Seznam objektů"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Vyhlazování"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Množství vyhlazení, které se použije na obrázek."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Obchod"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Soubor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Otevřit projekt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "Upr&avit"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Aktualizovat existující"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "Po&hled"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Vytvořit nový"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "Nasta&vení"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Souhrn - Projekt Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "D&oplňky"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Jak by měl být problém v zařízení vyřešen?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&reference"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Nastavení tiskárny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "Po&moc"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Typ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nový projekt"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Skupina tiskárny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Jak by měl být problém v profilu vyřešen?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Slicuji..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Nastavení profilu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Nelze slicovat"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Název"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Záměr"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Není v profilu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 přepsání"
+msgstr[1] "%1 přepsání"
+msgstr[2] "%1 přepsání"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivát z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 override"
+msgstr[1] "%1, %2 overrides"
+msgstr[2] "%1, %2 overrides"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Jak by měl být problém v materiálu vyřešen?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Nastavení materiálu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Nastavení zobrazení"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mód"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Viditelná zařízení:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 z %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Nahrání projektu vymaže všechny modely na podložce."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Otevřít"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Zpracovává se"
+msgid "Want more?"
+msgstr "Chcete více?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Slicovat"
+msgid "Backup Now"
+msgstr "Zálohovat nyní"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Začít proces slicování"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatické zálohy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Zrušit"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Automaticky vytvořte zálohu každý den, kdy je spuštěna Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Odhad času"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura verze"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Odhad materiálu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Zařízení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiály"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profily"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Žádný odhad času není dostupný"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Zásuvné moduly"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Žádná cena není dostupná"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Obnovit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Odstranit zálohu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Opravdu chcete tuto zálohu smazat? To nelze vrátit zpět."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Obnovit zálohu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Před obnovením zálohy budete muset restartovat Curu. Chcete nyní Curu zavřít?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Zálohovat a synchronizovat vaše nastavení Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Náhled"
+msgid "Sign in"
+msgstr "Přihlásit se"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Přidat tiskárnu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Moje zálohy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Momentálně nemáte žádné zálohy. Pomocí tlačítka 'Zálohovat nyní' vytvořte."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Během fáze náhledu budete omezeni na 5 viditelných záloh. Chcete-li zobrazit starší, odstraňte zálohu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura zálohy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Další informace o anonymním shromažďování údajů"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu. Níže uvádíme příklad všech sdílených dat:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Nechci posílat anonymní data"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Povolit zasílání anonymních dat"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Zásuvný balíček Post Processing"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Přidat síťovou tiskárnu"
+msgid "Post Processing Scripts"
+msgstr "Skripty Post Processingu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Přidat skript"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Přidat ne-síťovou tiskárnu"
+msgid "Settings"
+msgstr "Nastavení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Změnít aktivní post-processing skripty."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "Následují skript je aktivní:"
+msgstr[1] "Následují skripty jsou aktivní:"
+msgstr[2] "Následují skripty jsou aktivní:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Přidat Cloudovou tiskárnu"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Vyberte prosím všechny upgrady provedené v tomto originálu Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Čekám na odpověď od Cloudu"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Vyhřívaná podložka (Oficiální kit, nebo vytvořená)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Vyrovnávání podložky"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Žádné tiskárny nenalezeny ve vašem účtě?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Chcete-li se ujistit, že vaše výtisky vyjdou skvěle, můžete nyní sestavení své podložku. Když kliknete na „Přesunout na další pozici“, tryska se přesune do různých poloh, které lze upravit."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Následující tiskárny ve vašem účtě byla přidány do Cury:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Pro každou pozici; vložte kousek papíru pod trysku a upravte výšku tiskové desky. Výška desky pro sestavení tisku je správná, když je papír lehce uchopen špičkou trysky."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Spustit vyrovnání položky"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Přesunout na další pozici"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Přidat tiskárnu manuálně"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Přidat tiskárnu podle IP adresy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Zadejte IP adresu vaší tiskárny."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Přidat"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Nelze se připojit k zařízení."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Ukončit %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Nemůžete se připojit k Vaší tiskárně Ultimaker?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Tiskárna na této adrese dosud neodpověděla."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Tuto tiskárnu nelze přidat, protože se jedná o neznámou tiskárnu nebo není hostitelem skupiny."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Zpět"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Připojit"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Uživatelská dohoda"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Odmítnout a zavřít"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Vítejte v Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
-msgstr "Při nastavování postupujte podle těchto pokynů Ultimaker Cura. Bude to trvat jen několik okamžiků."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Začínáme"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Přihlásit se do platformy Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Přidat nastavení materiálů a moduly z Obchodu"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Zálohovat a synchronizovat nastavení materiálů a moduly"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Sdílejte nápady a získejte pomoc od více než 48 0000 uživatelů v Ultimaker komunitě"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Přeskočit"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Odmítnout"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Vytvořit účet Ultimaker zdarma"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Tiskárna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Nastavení trysky"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Výrobce"
+msgid "Nozzle size"
+msgstr "Velikost trysky"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor profilu"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Název tiskárny"
+msgid "Compatible material diameter"
+msgstr "Kompatibilní průměr materiálu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Pojmenujte prosím svou tiskárnu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "X offset trysky"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Přes síť nebyla nalezena žádná tiskárna."
+msgid "Nozzle offset Y"
+msgstr "Y offset trysky"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Obnovit"
+msgid "Cooling Fan Number"
+msgstr "Číslo chladícího větráku"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Počáteční G-kód extuderu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Ukončující G-kód extuderu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Nastavení tiskárny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Přidat tiskárnu podle IP"
+msgid "X (Width)"
+msgstr "X (Šířka)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Přidat cloudovou tiskárnu"
+msgid "Y (Depth)"
+msgstr "Y (Hloubka)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Podpora při problémech"
+msgid "Z (Height)"
+msgstr "Z (Výška)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Pomožte nám zlepšovat Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "Tvar tiskové podložky"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu, včetně:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Počátek ve středu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Typy zařízení"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Topná podložka"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Použití materiálu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Vyhřívaný objem sestavení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Počet sliců"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Varianta G kódu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Nastavení tisku"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Nastavení tiskové hlavy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Data shromážděná společností Ultimaker Cura nebudou obsahovat žádné osobní údaje."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Více informací"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "Co je nového"
+msgid "X max"
+msgstr "X max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Prázdné"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Poznámky k vydání"
+msgid "Gantry Height"
+msgstr "Výška rámu tiskárny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Počet extrůderů"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Aplikovat offsety extruderu do G kódu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Počáteční G kód"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Ukončující G kód"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "Moje tiskárny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Sledujte tiskárny v Ultimaker Digital Factory."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Vytvořte tiskové projekty v Digital Library."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Tiskové úlohy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Sledujte tiskové úlohy a znovu tiskněte z historie."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Rozšiřte Ultimaker Cura pomocí modulů a materiálových profilů."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Staňte se expertem na 3D tisk díky Ultimaker e-learningu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Ultimaker podpora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Zjistěte, jak začít s Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Položit otázku"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Poraďte se s Ultimaker komunitou."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Nahlásit chybu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Dejte vývojářům vědět, že je něco špatně."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Navštivte web Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Tisknout vybraný model pomocí %1"
+msgstr[1] "Tisknout vybraný model pomocí %1"
+msgstr[2] "Tisknout vybraný model pomocí %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "Nasta&vení"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nový projekt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Obchod"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Podložka"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "Cílová teplota vyhřívací podložky. Podložka se zahřeje, nebo schladí směrem k této teplotě. Pokud je 0, tak je vyhřívání podložky vypnuto."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "Aktuální teplota vyhřívané podložky."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "Teplota pro předehřátí podložky."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Zrušit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Předehřání"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Před tiskem zahřejte postel předem. Můžete pokračovat v úpravě tisku, zatímco se zahřívá, a nemusíte čekat, až se postel zahřeje, až budete připraveni k tisku."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "Tiskárna není připojena."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Ovládání tiskárny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Pozice hlavy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Vzdálenost hlavy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Poslat G kód"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Na připojenou tiskárnu odešlete vlastní příkaz G-kódu. Stisknutím klávesy „Enter“ odešlete příkaz."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Extuder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Cílová teplota hotendu. Hotend se ohřeje nebo ochladí na tuto teplotu. Pokud je 0, ohřev teplé vody je vypnutý."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Aktuální teplota tohoto hotendu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "Teplota pro předehřátí hotendu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Před tiskem zahřejte hotend předem. Můžete pokračovat v úpravách tisku, zatímco se zahřívá, a nemusíte čekat na zahřátí hotendu, až budete připraveni k tisku."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Barva materiálu v tomto extruderu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Materiál v tomto extruderu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "Vložená trysky v tomto extruderu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Otevřít soubor s projektem"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Toto je soubor projektu Cura. Chcete jej otevřít jako projekt nebo importovat z něj modely?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Pamatuj si moji volbu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Otevřít jako projekt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importovat modely"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Uložit projekt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Extruder %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & materiál"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Materiál"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Nezobrazovat souhrn projektu při uložení znovu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Uložit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Otevřít soubor(y)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Ve vybraných souborech jsme našli jeden nebo více projektových souborů. Naraz můžete otevřít pouze jeden soubor projektu. Doporučujeme importovat pouze modely z těchto souborů. Chtěli byste pokračovat?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Importovat vše jako modely"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "O %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "verze: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Komplexní řešení pro 3D tisk z taveného filamentu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3774,399 +3610,683 @@ msgstr ""
 "Cura vyvíjí Ultimaker B.V. ve spolupráci s komunitou.\n"
 "Cura hrdě používá následující open source projekty:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafické uživatelské prostředí"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Aplikační framework"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Generátor G kódu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Meziprocesní komunikační knihovna"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programovací jazyk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI framework"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Propojení GUI frameworku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Binding knihovna C/C++"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formát výměny dat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Podpůrná knihovna pro vědecké výpočty"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Podpůrný knihovna pro rychlejší matematické výpočty"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Podpůrná knihovna pro práci se soubory STL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Podpůrná knihovna pro manipulaci s planárními objekty"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Podpůrná knihovna pro manipulaci s trojúhelníkovými sítěmi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Podpůrná knihovna pro manipulaci s 3MF soubory"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Podpůrná knihovna pro metadata souborů a streaming"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Knihovna pro sériovou komunikaci"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Knihovna ZeroConf discovery"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Knihovna pro výstřižky z mnohoúhelníků"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Kontrola statických typů pro Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Základní certifikáty pro validaci důvěryhodnosti SSL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Chyba v Python trackovací knihovně"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Knihovna pro plošnou optimalizaci vyvinutá Prusa Research"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Propojení libnest2d s jazykem Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Podpůrná knihovna pro přístup k systémové klíčence"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Python rozšíření pro Microsoft Windows"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Font"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Ikony SVG"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux cross-distribution application deployment"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Otevřít soubor(y)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Ve vybraných souborech jsme našli jeden nebo více projektových souborů. Naraz můžete otevřít pouze jeden soubor projektu. Doporučujeme importovat pouze modely z těchto souborů. Chtěli byste pokračovat?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Importovat vše jako modely"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Uložit projekt"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Extruder %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & materiál"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Materiál"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Nezobrazovat souhrn projektu při uložení znovu"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Uložit"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Smazat nebo nechat změny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"Upravili jste některá nastavení profilu.\n"
-"Chcete tato změněná nastavení zachovat i po přepnutí profilů?\n"
-"V opačném případě můžete změny smazat a načíst výchozí hodnoty z '%1'."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Nastavení profilu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Aktuální změny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Vždy se zeptat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Smazat a už se nikdy neptat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Nechat a už se nikdy neptat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Smazat změny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Zanechat změny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Otevřít soubor s projektem"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "Není z čeho vybírat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Toto je soubor projektu Cura. Chcete jej otevřít jako projekt nebo importovat z něj modely?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Otevřít soubor(y)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Pamatuj si moji volbu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Otevřít &Poslední"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Otevřít jako projekt"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Viditelná nastavení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importovat modely"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Sbalit všechny kategorie"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Spravovat nastavení viditelnosti ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiál"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Nastavit jako aktivní extruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Povolit extuder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Zakázat Extruder"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiál"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Oblíbené"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Obecné"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "Po&moc"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Soubor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Uložit projekt..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportovat..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Výběr exportu..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&reference"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "Upr&avit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Tiskárna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Tiskárny s povolenou sítí"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Lokální tiskárny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "D&oplňky"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfigurace"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Aktivní tisk"
+msgid "Loading available configurations from the printer..."
+msgstr "Načítání dostupných konfigurací z tiskárny ..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Název úlohy"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Konfigurace nejsou k dispozici, protože je tiskárna odpojena."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Čas tisku"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Tato konfigurace není k dispozici, protože %1 nebyl rozpoznán. Navštivte prosím %2 a stáhněte si správný materiálový profil."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Předpokládaný zbývající čas"
+msgid "Marketplace"
+msgstr "Obchod"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "Cloudová tiskárna je offline. Prosím zkontrolujte, zda je tiskárna zapnutá a připojená k internetu."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "Konfigurace tohoto extruderu není dovolena a znemožňuje slicování."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Tiskárna není připojena k vašemu účtu. Prosím navštivte Ultimaker Digital Factory pro navázání spojení."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "Neexistují žádné profily odpovídající nastavení tohoto extruderu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "Připojení ke cloudu není nyní dostupné. Prosím přihlašte se k připojení ke cloudové tiskárně."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Vybrat konfiguraci"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "Připojení ke cloudu není nyní dostupné. Prosím zkontrolujte si vaše internetové připojení."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfigurace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Přidat tiskárnu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Vlastní"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Spravovat tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Tiskárna"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Připojené tiskárny"
+msgid "Enabled"
+msgstr "Povoleno"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Přednastavené tiskárny"
+msgid "Material"
+msgstr "Materiál"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Nastavení tisku"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "S touto kombinací materiálu pro lepší adhezi použijte lepidlo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Nastavení tisku zakázáno. Soubor G-kódu nelze změnit."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Tisknout vybraný model pomocí:"
+msgstr[1] "Tisknout vybrané modely pomocí:"
+msgstr[2] "Tisknout vybrané modely pomocí:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Násobit vybraný model"
+msgstr[1] "Násobit vybrané modele"
+msgstr[2] "Násobit vybrané modele"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
+msgid "Number of Copies"
+msgstr "Počet kopií"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Uložit projekt..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "Po&hled"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "Pozice &kamery"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Pohled kamery"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspektiva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Ortografický"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Typ pohledu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Přihlásit se do platformy Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Některé hodnoty nastavení / přepsání se liší od hodnot uložených v profilu.\n"
-"\n"
-"Klepnutím otevřete správce profilů."
+"- Přidejte materiálnové profily and moduly z Obchodu\n"
+"- Zálohujte a synchronizujte vaše materiálové profily and moduly\n"
+"- Sdílejte nápady a získejte pomoc od více než 48 000 uživatelů v Ultimaker komunitě"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Vlastní profily"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Vytvořit účet Ultimaker zdarma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Zrušit aktuální změny"
+msgid "Sign in"
+msgstr "Přihlásit se"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Poslední aktualizace: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Doporučeno"
+msgid "Ultimaker Account"
+msgstr "Ultimaker Account"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Vlastní"
+msgid "Sign Out"
+msgstr "Odhlásit se"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Kontroluji..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Účet byl synchronizován"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Nastala chyba..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Nainstalujte čekající aktualizace"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Zkontrolovat aktualizace pro účet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Slicuji..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Nelze slicovat"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Zpracovává se"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Slicovat"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Začít proces slicování"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Zrušit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Odhad času"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Odhad materiálu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Žádný odhad času není dostupný"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Žádná cena není dostupná"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Náhled"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Tento balíček bude nainstalován po restartování."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Obecné"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Nastavení"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Tiskárny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiály"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profily"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Zavírám %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Doopravdy chcete zavřít %1?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Nainstalovat balíček"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Otevřít Soubor(y)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Ve vybraných souborech jsme našli jeden nebo více souborů G-kódu. Naraz můžete otevřít pouze jeden soubor G-kódu. Pokud chcete otevřít soubor G-Code, vyberte pouze jeden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Přidat tiskárnu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Co je nového"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Zap"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Vyp"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Experimentální"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Nastavení tisku"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Nastavení tisku zakázáno. Soubor G-kódu nelze změnit."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Doporučeno"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Vlastní"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
@@ -4174,1831 +4294,1704 @@ msgstr[0] "Neexistuje žádný profil %1 pro konfiguraci v extruderu %2. Místo
 msgstr[1] "Neexistuje žádný profil %1 pro konfigurace v extruderu %2. Místo toho bude použit výchozí záměr"
 msgstr[2] "Neexistuje žádný profil %1 pro konfigurace v extruderu %2. Místo toho bude použit výchozí záměr"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profily"
+msgid "Gradual infill"
+msgstr "Postupná výplň"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Upravili jste některá nastavení profilu. Pokud je chcete změnit, přejděte do uživatelského režimu."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Postupná výplň postupně zvyšuje množství výplně směrem nahoru."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Podpora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Vytvořte struktury pro podporu částí modelu, které mají přesahy. Bez těchto struktur by se takové části během tisku zhroutily."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Postupná výplň"
+msgid "Profiles"
+msgstr "Profily"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Postupná výplň postupně zvyšuje množství výplně směrem nahoru."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Upravili jste některá nastavení profilu. Pokud je chcete změnit, přejděte do uživatelského režimu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Adheze"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Umožňuje tisk okraje nebo voru. Tímto způsobem se kolem nebo pod objekt přidá plochá oblast, kterou lze snadno odříznout."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Uložit projekt..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Vlastní profily"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Tiskárny s povolenou sítí"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Zrušit aktuální změny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Lokální tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiál"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Některé hodnoty nastavení / přepsání se liší od hodnot uložených v profilu.\n"
+"\n"
+"Klepnutím otevřete správce profilů."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Oblíbené"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Nastavení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Obecné"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Tisknout vybraný model pomocí:"
-msgstr[1] "Tisknout vybrané modely pomocí:"
-msgstr[2] "Tisknout vybrané modely pomocí:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Aktuální"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Násobit vybraný model"
-msgstr[1] "Násobit vybrané modele"
-msgstr[2] "Násobit vybrané modele"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Počet kopií"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Uložit projekt..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportovat..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
+msgstr[2] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Výběr exportu..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Nastavení zobrazení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfigurace"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Vlastní"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Zkontrolovat vše"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktivovat"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Přejmenovat"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Potvrdit změnu průměru"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Nový průměr vlákna je nastaven na %1 mm, což není kompatibilní s aktuálním extrudérem. Přejete si pokračovat?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Tiskárna"
+msgid "Display Name"
+msgstr "Jméno"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Povoleno"
+msgid "Brand"
+msgstr "Značka"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiál"
+msgid "Material Type"
+msgstr "Typ materiálu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "S touto kombinací materiálu pro lepší adhezi použijte lepidlo."
+msgid "Color"
+msgstr "Barva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "Konfigurace tohoto extruderu není dovolena a znemožňuje slicování."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "Neexistují žádné profily odpovídající nastavení tohoto extruderu."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Vlastnosti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Vybrat konfiguraci"
+msgid "Density"
+msgstr "Husttoa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfigurace"
+msgid "Diameter"
+msgstr "Průměr"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Načítání dostupných konfigurací z tiskárny ..."
+msgid "Filament Cost"
+msgstr "Cena filamentu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Konfigurace nejsou k dispozici, protože je tiskárna odpojena."
+msgid "Filament weight"
+msgstr "Váha filamentu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Tato konfigurace není k dispozici, protože %1 nebyl rozpoznán. Navštivte prosím %2 a stáhněte si správný materiálový profil."
+msgid "Filament length"
+msgstr "Délka filamentu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Obchod"
+msgid "Cost per Meter"
+msgstr "Cena za metr"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Otevřít soubor(y)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Tento materiál je propojen s %1 a sdílí některé jeho vlastnosti."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Tiskárna"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Zrušit propojení s materiálem"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiál"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Popis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Nastavit jako aktivní extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informace o adhezi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Povolit extuder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Informace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Zakázat Extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Synchronizovat materiály s tiskárnami"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Otevřít &Poslední"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Synchronizovat materiály s tiskárnami"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Viditelná nastavení"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "Následováním několika jednoduchých kroků budete moci synchronizovat všechny vaše materiálové profily s vašimi tiskárnami."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Sbalit všechny kategorie"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "K čemu je dobrá synchronizace materiálových profilů?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Spravovat nastavení viditelnosti ..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Začít"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "Pozice &kamery"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Přihlásit se"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Pohled kamery"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Pro automatickou synchronizaci materiálových profilů se všemi vašimi tiskárnami připojenými k Digital Factory musíte být přihlášení v Cuře."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektiva"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Synchronizovat materiály pomocí USB"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortografický"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "Následující tiskárny získají nové materiálové profily:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "Pod&ložka"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "Při odesílání materiálů do tiskáren se něco nepodařilo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Typ pohledu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "Materiálové profily byly úspěšně synchronizovány s následujícími tiskárnami:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Je tisknuto jako podpora."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Podpora při problémech"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Ostatní modely překrývající se s tímto modelem jsou upraveny."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "Chybí tiskárny?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Výplň překrývající se s tímto modelem byla modifikována."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Ujistěte se, že jsou všechny vaše tiskárny zapnuté a připojené k Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Přesahy na tomto modelu nejsou podporovány."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Obnovit seznam"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Přepíše %1 nastavení."
-msgstr[1] "Přepíše %1 nastavení."
-msgstr[2] "Přepíše %1 nastavení."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Zkusit znovu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profily"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Hotovo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktivovat"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Synchronizovat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Vytvořit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "Synchronizuji"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "Nenalezeny žádné tiskárny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Zdá se, že nemáte žádné kompatibilní tiskárny připojené k Digital Factory. Ujistěte se, že je vaše tiskárna připojena a používá nejnovější firmware."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Zjistěte, jak připojit vaši tiskárnu k Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Obnovit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Synchronizovat materiálové profily přes USB"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Následujte tyto kroky, abyste nahráli nové materiálové profily do vaší tiskárny."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Klikněte na tlačítko \"Exportovat archiv s materiálem\"."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "Uložte soubor .umm na USB úložiště."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "Připojte USB úložiště k vaší tiskárně a spusťte proceduru pro nahrání nových materiálových profilů."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Jak nahrát nové materiálové profily do mé tiskárny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Zpět"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Exportovat archiv s materiálem"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Exportovat všechny materiály"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplikovat"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Přejmenovat"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Import"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Export"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Vytvořit profil"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Prosím uveďte jméno pro tento profil."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplikovat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplikovat profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Export"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Potvrdit odstranění"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Doopravdy chcete odstranit %1? Toto nelze vrátit zpět!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Přejmenovat profil"
+msgid "Import Material"
+msgstr "Importovat materiál"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importovat profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Úspěšně importován materiál <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Nelze importovat materiál <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exportovat profil"
+msgid "Export Material"
+msgstr "Exportovat materiál"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Neúspěch při exportu materiálu do <filename>%1</filename>: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Úspěšné exportování materiálu do <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Tiskárna: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Aktualizovat profil s aktuálním nastavení/přepsánímy"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Tento profil používá výchozí nastavení zadaná tiskárnou, takže nemá žádná nastavení / přepíše v níže uvedeném seznamu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Vaše aktuální nastavení odpovídá vybranému profilu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Globální nastavení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Obecné"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Vytvořit profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Prosím uveďte jméno pro tento profil."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exportovat profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplikovat profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Přejmenovat profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importovat profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Rozhranní"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Měna:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Styl:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Aby se tyto změny projevily, budete muset aplikaci restartovat."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Slicovat automaticky při změně nastavení."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Slicovat automaticky"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Chování výřezu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Zvýraznit červeně místa modelu bez podpor. Bez podpor tyto místa nebudou správně vytisknuta."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Zobrazit převis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Zvýraznit chybějící nebo vedlejší povrchy modelu pomocí varovných značek. Dráhám nástrojů budou často chybět části zamýšlené geometrie."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Zobrazovat chyby modelu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Při výběru modelu pohybuje kamerou tak, aby byl model ve středu pohledu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Vycentrovat kameru pokud je vybrána položka"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Mělo by být výchozí chování přiblížení u cury invertováno?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Obrátit směr přibližování kamery."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Mělo by se přibližování pohybovat ve směru myši?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "V pravoúhlé perspektivě není podporováno přiblížení směrem k myši."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Přiblížit směrem k směru myši"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Měly by se modely na platformě pohybovat tak, aby se již neprotínaly?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Zajistěte, aby modely byly odděleny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Měly by být modely na platformě posunuty dolů tak, aby se dotýkaly podložky?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Automaticky přetáhnout modely na podložku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Zobrazte v čtečce g-kódu varovnou zprávu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Upozornění ve čtečce G-kódu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Měla by být vrstva vynucena do režimu kompatibility?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Vynutit režim kompatibility zobrazení vrstev (vyžaduje restart)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Měla by se Cura otevřít v místě, kde byla uzavřena?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Při zapnutí obnovit pozici okna"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Jaký typ kamery by se měl použít?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Vykreslování kamery:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Perspektiva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Ortografický"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Otevírám a ukládám soubory"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Měli by se soubory z plochy, nebo externích aplikací otevírat ve stejné instanci Cury?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Používat pouze jednu instanci programu Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "Má být podložka vyčištěna před načtením nového modelu v jediné instanci Cury?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Vyčistit podložku před načtením modelu do jediné instance"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Měly by být modely upraveny na velikost podložky, pokud jsou příliš velké?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Škálovat velké modely"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Model se může jevit velmi malý, pokud je jeho jednotka například v metrech, nikoli v milimetrech. Měly by být tyto modely škálovány?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Škálovat extrémně malé modely"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Měly by být modely vybrány po načtení?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Vybrat modely po načtení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Je třeba k názvu tiskové úlohy přidat předponu založenou na názvu tiskárny automaticky?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Přidat předponu zařízení před název úlohy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Mělo by se při ukládání souboru projektu zobrazit souhrn?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Zobrazit souhrnný dialog při ukládání projektu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Výchozí chování při otevírání souboru"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Výchozí chování při otevření souboru s projektem: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Vždy se zeptat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Vždy otevírat jako projekt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Vždy importovat modely"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Pokud jste provedli změny v profilu a přepnuli na jiný, zobrazí se dialogové okno s dotazem, zda si přejete zachovat své modifikace nebo ne, nebo si můžete zvolit výchozí chování a už nikdy toto dialogové okno nezobrazovat."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Výchozí chování pro změněné hodnoty nastavení při přepnutí na jiný profil: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Vždy smazat změněné nastavení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Vždy přesunout nastavení do nového profilu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Soukromí"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Měla by být anonymní data o vašem tisku zaslána společnosti Ultimaker? Upozorňujeme, že nejsou odesílány ani ukládány žádné modely, adresy IP ani jiné osobní údaje."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Posílat (anonymní) informace o tisku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Více informací"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Aktualizace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Měla by Cura zkontrolovat aktualizace při spuštění programu?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Zkontrolovat aktualizace při zapnutí"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "Při kontrole aktualizací kontrolovat pouze stabilní vydání."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Pouze stabilní vydání"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "Při kontrole aktualizací kontrolovat stabilní i beta vydání."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "Stabilní a beta vydání"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Mají být při každém startu Cury automaticky kontrolovány nové moduly? Důrazně doporučujeme tuto možnost nevypínat!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Získávat oznámení o aktualizacích modulů"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informace"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Přidat tiskárnu podle IP adresy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Potvrdit změnu průměru"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Zadejte IP adresu vaší tiskárny."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Nový průměr vlákna je nastaven na %1 mm, což není kompatibilní s aktuálním extrudérem. Přejete si pokračovat?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Přidat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Jméno"
+msgid "Could not connect to device."
+msgstr "Nelze se připojit k zařízení."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Typ materiálu"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Nemůžete se připojit k Vaší tiskárně Ultimaker?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Barva"
+msgid "The printer at this address has not responded yet."
+msgstr "Tiskárna na této adrese dosud neodpověděla."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Vlastnosti"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Tuto tiskárnu nelze přidat, protože se jedná o neznámou tiskárnu nebo není hostitelem skupiny."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Husttoa"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Připojit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Průměr"
+msgid "Release Notes"
+msgstr "Poznámky k vydání"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Cena filamentu"
+msgid "User Agreement"
+msgstr "Uživatelská dohoda"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Váha filamentu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Přijmout"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Délka filamentu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Odmítnout a zavřít"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Cena za metr"
+msgid "What's New"
+msgstr "Co je nového"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Další"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Tento materiál je propojen s %1 a sdílí některé jeho vlastnosti."
+msgid "Add a Cloud printer"
+msgstr "Přidat Cloudovou tiskárnu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Zrušit propojení s materiálem"
+msgid "Waiting for Cloud response"
+msgstr "Čekám na odpověď od Cloudu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Popis"
+msgid "No printers found in your account?"
+msgstr "Žádné tiskárny nenalezeny ve vašem účtě?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informace o adhezi"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Následující tiskárny ve vašem účtě byla přidány do Cury:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Vytvořit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Přidat tiskárnu manuálně"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplikovat"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Přidat nastavení materiálů a moduly z Obchodu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Synchronizovat s tiskárnami"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Zálohovat a synchronizovat nastavení materiálů a moduly"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Tiskárna"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Sdílejte nápady a získejte pomoc od více než 48 0000 uživatelů v Ultimaker komunitě"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importovat materiál"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Přeskočit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Nelze importovat materiál <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Vytvořit účet Ultimaker zdarma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Úspěšně importován materiál <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Vítejte v Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exportovat materiál"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr "Při nastavování postupujte podle těchto pokynů Ultimaker Cura. Bude to trvat jen několik okamžiků."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Neúspěch při exportu materiálu do <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Začínáme"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Úspěšné exportování materiálu do <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Prázdné"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Synchronizovat materiály s tiskárnami"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Výrobce"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Synchronizovat materiály s tiskárnami"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor profilu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "Následováním několika jednoduchých kroků budete moci synchronizovat všechny vaše materiálové profily s vašimi tiskárnami."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Název tiskárny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Začít"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Pojmenujte prosím svou tiskárnu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "K čemu je dobrá synchronizace materiálových profilů?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Přidat tiskárnu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Přihlásit se"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Přidat síťovou tiskárnu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Pro automatickou synchronizaci materiálových profilů se všemi vašimi tiskárnami připojenými k Digital Factory musíte být přihlášení v Cuře."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Přidat ne-síťovou tiskárnu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Synchronizovat materiály pomocí USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Přes síť nebyla nalezena žádná tiskárna."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "Následující tiskárny získají nové materiálové profily:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Obnovit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "Při odesílání materiálů do tiskáren se něco nepodařilo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Přidat tiskárnu podle IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "Materiálové profily byly úspěšně synchronizovány s následujícími tiskárnami:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Přidat cloudovou tiskárnu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Podpora při problémech"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "Chybí tiskárny?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Pomožte nám zlepšovat Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Ujistěte se, že jsou všechny vaše tiskárny zapnuté a připojené k Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Obnovit seznam"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Zkusit znovu"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Hotovo"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu, včetně:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Synchronizovat"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Typy zařízení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "Synchronizuji"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Použití materiálu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "Nenalezeny žádné tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Počet sliců"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Zdá se, že nemáte žádné kompatibilní tiskárny připojené k Digital Factory. Ujistěte se, že je vaše tiskárna připojena a používá nejnovější firmware."
+msgid "Print settings"
+msgstr "Nastavení tisku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Zjistěte, jak připojit vaši tiskárnu k Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Data shromážděná společností Ultimaker Cura nebudou obsahovat žádné osobní údaje."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Obnovit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Více informací"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Synchronizovat materiálové profily přes USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Seznam objektů"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Následujte tyto kroky, abyste nahráli nové materiálové profily do vaší tiskárny."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "Je tisknuto jako podpora."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Klikněte na tlačítko \"Exportovat archiv s materiálem\"."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "Ostatní modely překrývající se s tímto modelem jsou upraveny."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "Uložte soubor .umm na USB úložiště."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "Výplň překrývající se s tímto modelem byla modifikována."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "Připojte USB úložiště k vaší tiskárně a spusťte proceduru pro nahrání nových materiálových profilů."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "Přesahy na tomto modelu nejsou podporovány."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Jak nahrát nové materiálové profily do mé tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Přepíše %1 nastavení."
+msgstr[1] "Přepíše %1 nastavení."
+msgstr[2] "Přepíše %1 nastavení."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Exportovat archiv s materiálem"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Připojené tiskárny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Exportovat všechny materiály"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Přednastavené tiskárny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Nastavení zobrazení"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "Cloudová tiskárna je offline. Prosím zkontrolujte, zda je tiskárna zapnutá a připojená k internetu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Zkontrolovat vše"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Tiskárna není připojena k vašemu účtu. Prosím navštivte Ultimaker Digital Factory pro navázání spojení."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "Připojení ke cloudu není nyní dostupné. Prosím přihlašte se k připojení ke cloudové tiskárně."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Vypočítáno"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "Připojení ke cloudu není nyní dostupné. Prosím zkontrolujte si vaše internetové připojení."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Nastavení"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Přidat tiskárnu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Spravovat tiskárny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Aktuální"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Jednotka"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Bez názvu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Nepřipojen k tiskárně"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "Tiskárna nepřijímá příkazy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "V údržbě. Prosím zkontrolujte tiskíárnu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Ztráta spojení s tiskárnou"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Tisknu..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Pozastaveno"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Připravuji..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Prosím odstraňte výtisk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Zrušit tisk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Jste si jist, že chcete zrušit tisknutí?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Tisknout vybraný model pomocí %1"
-msgstr[1] "Tisknout vybraný model pomocí %1"
-msgstr[2] "Tisknout vybraný model pomocí %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "Moje tiskárny"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Sledujte tiskárny v Ultimaker Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Vytvořte tiskové projekty v Digital Library."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Tiskové úlohy"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Sledujte tiskové úlohy a znovu tiskněte z historie."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Rozšiřte Ultimaker Cura pomocí modulů a materiálových profilů."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Staňte se expertem na 3D tisk díky Ultimaker e-learningu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Ultimaker podpora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Některá skrytá nastavení používají hodnoty odlišné od jejich normální vypočtené hodnoty.\n"
+"\n"
+"Klepnutím toto nastavení zviditelníte."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Zjistěte, jak začít s Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Prohledat nastavení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Položit otázku"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Kopírovat hodnotu na všechny extrudery"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Poraďte se s Ultimaker komunitou."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Kopírovat všechny změněné hodnoty na všechny extrudery"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Nahlásit chybu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Schovat toto nastavení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Dejte vývojářům vědět, že je něco špatně."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Neukazovat toto nastavení"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Navštivte web Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Nechat toto nastavení viditelné"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Ovládání tiskárny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Konfigurovat viditelnost nastavení..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Pozice hlavy"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Toto nastavení se nepoužívá, protože všechna nastavení, která ovlivňuje, jsou přepsána."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Ovlivňuje"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Ovlivněno"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Vzdálenost hlavy"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Toto nastavení je vždy sdíleno všemi extrudéry. Jeho změnou se změní hodnota všech extruderů."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Poslat G kód"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Na připojenou tiskárnu odešlete vlastní příkaz G-kódu. Stisknutím klávesy „Enter“ odešlete příkaz."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Toto nastavení je vyřešeno z konfliktních hodnot specifického extruder:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Extuder"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Cílová teplota hotendu. Hotend se ohřeje nebo ochladí na tuto teplotu. Pokud je 0, ohřev teplé vody je vypnutý."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Aktuální teplota tohoto hotendu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "Teplota pro předehřátí hotendu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Zrušit"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Předehřání"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Před tiskem zahřejte hotend předem. Můžete pokračovat v úpravách tisku, zatímco se zahřívá, a nemusíte čekat na zahřátí hotendu, až budete připraveni k tisku."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Barva materiálu v tomto extruderu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Materiál v tomto extruderu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "Vložená trysky v tomto extruderu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "Tiskárna není připojena."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Toto nastavení má jinou hodnotu než profil.\n"
+"\n"
+"Klepnutím obnovíte hodnotu profilu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Podložka"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "Cílová teplota vyhřívací podložky. Podložka se zahřeje, nebo schladí směrem k této teplotě. Pokud je 0, tak je vyhřívání podložky vypnuto."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "Aktuální teplota vyhřívané podložky."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "Teplota pro předehřátí podložky."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Před tiskem zahřejte postel předem. Můžete pokračovat v úpravě tisku, zatímco se zahřívá, a nemusíte čekat, až se postel zahřeje, až budete připraveni k tisku."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Přihlásit se"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Přidejte materiálnové profily and moduly z Obchodu\n"
-"- Zálohujte a synchronizujte vaše materiálové profily and moduly\n"
-"- Sdílejte nápady a získejte pomoc od více než 48 000 uživatelů v Ultimaker komunitě"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Vytvořit účet Ultimaker zdarma"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Poslední aktualizace: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker Account"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Odhlásit se"
+"Toto nastavení se obvykle počítá, ale v současné době je nastavena absolutní hodnota.\n"
+"\n"
+"Klepnutím obnovíte vypočítanou hodnotu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Kontroluji..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Účet byl synchronizován"
+msgid "Active print"
+msgstr "Aktivní tisk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Nastala chyba..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Nainstalujte čekající aktualizace"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Zkontrolovat aktualizace pro účet"
+msgid "Job Name"
+msgstr "Název úlohy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Bez názvu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Čas tisku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "Není z čeho vybírat"
+msgid "Estimated time left"
+msgstr "Předpokládaný zbývající čas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Zobrazit online průvodce řešením problémů"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Přepnout zobrazení na celou obrazovku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Ukončit zobrazení na celou obrazovku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Vrátit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Znovu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Ukončit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "3D Pohled"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Přední pohled"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Pohled seshora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Pohled zezdola"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Pohled z pravé strany"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Pohled z pravé strany"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Konfigurovat Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "Přidat t&iskárnu..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Spravovat &tiskárny..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Spravovat materiály..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Přidat více materiálů z obchodu"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Aktualizovat profil s aktuálními nastaveními/přepsáními"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "Smazat aktuální &změny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&Vytvořit profil z aktuálního nastavení/přepsání."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Spravovat profily..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Zobrazit online &dokumentaci"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Nahlásit &chybu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Co je nového"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Více..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Smazat vybrané"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Centrovat vybrané"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Násobit vybrané"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Odstranit model"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "&Centerovat model na podložce"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "Sesk&upit modely"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Rozdělit modely"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "Spo&jit modely"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "Náso&bení modelu..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Vybrat všechny modely"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Vyčistit podložku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Znovu načíst všechny modely"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Uspořádejte všechny modely do všechpodložek"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Uspořádat všechny modely"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Uspořádat selekci"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Resetovat všechny pozice modelů"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Resetovat všechny transformace modelů"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Otevřít soubor(y)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Nový projekt..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Zobrazit složku s konfigurací"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Konfigurovat viditelnost nastavení..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "Mark&et"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Toto nastavení se nepoužívá, protože všechna nastavení, která ovlivňuje, jsou přepsána."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Ovlivňuje"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Ovlivněno"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Toto nastavení je vždy sdíleno všemi extrudéry. Jeho změnou se změní hodnota všech extruderů."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Toto nastavení je vyřešeno z konfliktních hodnot specifického extruder:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Toto nastavení má jinou hodnotu než profil.\n"
-"\n"
-"Klepnutím obnovíte hodnotu profilu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Toto nastavení se obvykle počítá, ale v současné době je nastavena absolutní hodnota.\n"
-"\n"
-"Klepnutím obnovíte vypočítanou hodnotu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Prohledat nastavení"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Kopírovat hodnotu na všechny extrudery"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Kopírovat všechny změněné hodnoty na všechny extrudery"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Schovat toto nastavení"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Neukazovat toto nastavení"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Nechat toto nastavení viditelné"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Některá skrytá nastavení používají hodnoty odlišné od jejich normální vypočtené hodnoty.\n"
-"\n"
-"Klepnutím toto nastavení zviditelníte."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Tento balíček bude nainstalován po restartování."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Nastavení"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Zavírám %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Doopravdy chcete zavřít %1?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Nainstalovat balíček"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D Pohled"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Otevřít Soubor(y)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Přední pohled"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Ve vybraných souborech jsme našli jeden nebo více souborů G-kódu. Naraz můžete otevřít pouze jeden soubor G-kódu. Pokud chcete otevřít soubor G-Code, vyberte pouze jeden."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Pohled seshora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Přidat tiskárnu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Pohled zleva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Co je nového"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Pohled zprava"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Umožňuje nastavení pro každý model."
+msgid "Provides a prepare stage in Cura."
+msgstr "Poskytuje přípravnou fázi v Cuře."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Nástroj pro nastavení pro každý model"
+msgid "Prepare Stage"
+msgstr "Fáze přípravy"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Poskytuje podporu pro import profilů Cura."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Poskytuje podporu pro export profilů Cura."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Čtečka Cura profilu"
+msgid "Cura Profile Writer"
+msgstr "Zapisovač Cura profilu"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Poskytuje podporu pro čtení souborů X3D."
+msgid "Provides support for reading model files."
+msgstr "Poskytuje podporu pro čtení souborů modelu."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "Čtečka X3D"
+msgid "Trimesh Reader"
+msgstr "Čtečka trimesh"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Zálohujte a obnovte konfiguraci."
+msgid "Checks for firmware updates."
+msgstr "Zkontroluje dostupné aktualizace firmwaru."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura zálohy"
+msgid "Firmware Update Checker"
+msgstr "Kontroler aktualizace firmwaru"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Poskytuje způsob, jak změnit nastavení zařízení (například objem sestavení, velikost trysek atd.)."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Protokolová určité události, aby je mohl použít reportér havárií"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Akce nastavení zařízení"
+msgid "Sentry Logger"
+msgstr "Záznamník hlavy"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Vytvoří gumovou síť, která blokuje tisk podpory na určitých místech"
+msgid "Provides a monitor stage in Cura."
+msgstr "Poskytuje monitorovací scénu v Cuře."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Mazač podpor"
+msgid "Monitor Stage"
+msgstr "Fáze monitoringu"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -6010,105 +6003,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Vyměnitelný zásuvný modul pro výstupní zařízení"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Poskytuje akce počítače pro aktualizaci firmwaru."
+msgid "Provides support for reading AMF files."
+msgstr "Poskytuje podporu pro čtení souborů AMF."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Firmware Updater"
+msgid "AMF Reader"
+msgstr "Čtečka AMF"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Poskytuje podporu pro import profilů ze starších verzí Cura."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Poskytuje podporu pro čtení balíčků formátu Ultimaker."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Čtečka legacy Cura profilu"
+msgid "UFP Reader"
+msgstr "Čtečka UFP"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Poskytuje podporu pro čtení souborů 3MF."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Připojuje k Digitální knihovně. Umožňuje Cuře otevírat a ukládat soubory z a do Digitální knihovny."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Čtečka 3MF"
+msgid "Ultimaker Digital Library"
+msgstr "Digitální knihovna Ultimaker"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Poskytuje podporu pro psaní balíčků formátu Ultimaker."
+msgid "Provides the Per Model Settings."
+msgstr "Umožňuje nastavení pro každý model."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "Zapisovač UFP"
+msgid "Per Model Settings Tool"
+msgstr "Nástroj pro nastavení pro každý model"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Protokolová určité události, aby je mohl použít reportér havárií"
+msgid "Provides a machine actions for updating firmware."
+msgstr "Poskytuje akce počítače pro aktualizaci firmwaru."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Záznamník hlavy"
+msgid "Firmware Updater"
+msgstr "Firmware Updater"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Poskytuje podporu pro import profilů ze souborů g-kódu."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Spravuje síťová připojení k síťovým tiskárnám Ultimaker."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Čtečka profilu G kódu"
+msgid "Ultimaker Network Connection"
+msgstr "Síťové připojení Ultimaker"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Poskytuje fázi náhledu v Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Zkontroluje možné tiskové modely a konfiguraci tisku a poskytne návrhy."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Fáze náhledu"
+msgid "Model Checker"
+msgstr "Kontroler modelu"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Poskytuje rentgenové zobrazení."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Rentgenový pohled"
+msgid "Simulation View"
+msgstr "Pohled simulace"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Poskytuje odkaz na backend krájení CuraEngine."
+msgid "Writes g-code to a file."
+msgstr "Zapisuje G kód o souboru."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine Backend"
+msgid "G-code Writer"
+msgstr "Zapisovač G kódu"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Poskytuje podporu pro čtení souborů AMF."
+msgid "Provides support for writing 3MF files."
+msgstr "Poskytuje podporu pro psaní souborů 3MF."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Čtečka AMF"
+msgid "3MF Writer"
+msgstr "Zapisovač 3MF"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6120,175 +6113,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Čtečka kompresovaného G kódu"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Rozšíření, které umožňuje uživateli vytvořené skripty pro následné zpracování"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Poskytuje funkce pro čtení a zápis materiálových profilů založených na XML."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Post Processing"
+msgid "Material Profiles"
+msgstr "Materiálové profily"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Poskytuje podporu pro export profilů Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Poskytuje odkaz na backend krájení CuraEngine."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Zapisovač Cura profilu"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine Backend"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Přijme G-kód a odešle je do tiskárny. Plugin může také aktualizovat firmware."
+msgid "Provides support for reading X3D files."
+msgstr "Poskytuje podporu pro čtení souborů X3D."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB tisk"
+msgid "X3D Reader"
+msgstr "Čtečka X3D"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Poskytuje přípravnou fázi v Cuře."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Umožňuje generovat tiskovou geometrii ze 2D obrazových souborů."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Fáze přípravy"
+msgid "Image Reader"
+msgstr "Čtečka obrázků"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Povoluje načítání a zobrazení souborů G kódu."
+msgid "Provides support for reading 3MF files."
+msgstr "Poskytuje podporu pro čtení souborů 3MF."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Čtečka G kódu"
+msgid "3MF Reader"
+msgstr "Čtečka 3MF"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Umožňuje generovat tiskovou geometrii ze 2D obrazových souborů."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Poskytuje podporu pro psaní balíčků formátu Ultimaker."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Čtečka obrázků"
+msgid "UFP Writer"
+msgstr "Zapisovač UFP"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Poskytuje akce strojů pro stroje Ultimaker (jako je průvodce vyrovnáváním postele, výběr upgradů atd.)."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Poskytuje podporu pro import profilů ze starších verzí Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Akce zařízení Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Čtečka legacy Cura profilu"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Zapíše g-kód do komprimovaného archivu."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Aktualizuje konfigurace z Cura 4.3 na Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Zapisova kompresovaného G kódu"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Aktualizace verze 4.3 na 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Zkontroluje dostupné aktualizace firmwaru."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Aktualizuje konfigurace z Cura 2.1 na Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Kontroler aktualizace firmwaru"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Aktualizace verze 2.1 na 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Odešle anonymní informace o slicování. Lze deaktivovat pomocí preferencí."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Aktualizuje konfigurace z Cura 4.1 na Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informace o slicování"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Aktualizace verze 4.1 na 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Poskytuje funkce pro čtení a zápis materiálových profilů založených na XML."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Materiálové profily"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Připojuje k Digitální knihovně. Umožňuje Cuře otevírat a ukládat soubory z a do Digitální knihovny."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Aktualizuje konfigurace z Cura 4.5 na Cura 4.6."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Digitální knihovna Ultimaker"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Aktualizace verze 4.5 na 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Najděte, spravujte a nainstalujte nové balíčky Cura."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Aktualizuje konfigurace z Cura 3.3 na Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Nástroje"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Aktualizace verze 3.3 na 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Zapisuje G kód o souboru."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Aktualizuje konfigurace z Cura 4.8 na Cura 4.9."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Zapisovač G kódu"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "Aktualizace verze 4.8 na 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Poskytuje zobrazení simulace."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Aktualizuje konfigurace z Cura 2.7 na Cura 3.0."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Pohled simulace"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Aktualizace verze 2.7 na 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Aktualizuje konfigurace z Cura 4.5 na Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Aktualizuje konfigurace z Cura 4.4 na Cura 4.5."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Aktualizace verze 4.5 na 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Aktualizace verze 4.4 na 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Aktualizuje konfigurace z Cura 2.5 na Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Aktualizuje konfigurace z Cura 3.0 na Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Aktualizace verze 2.5 na 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Aktualizace verze 3.0 na 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6300,115 +6293,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "Aktualizace verze 4.6.0 na 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Aktualizuje konfigurace z Cura 4.7 na Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Aktualizuje konfigurace z Cura 2.6 na Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Aktualizace verze 4.7 na 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Aktualizace verze 2.6 na 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Aktualizuje konfigurace z Cura 3.4 na Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Aktualizuje konfigurace z Cura 4.2 na Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Aktualizace verze 3.4 na 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Aktualizace verze 4.2 na 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Aktualizuje konfigurace z Cura 2.1 na Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Aktualizuje konfigurace z Cura 4.0 na Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Aktualizace verze 2.1 na 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Aktualizace verze 4.0 na 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Aktualizuje konfigurace z Cura 3.2 na Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Aktualizuje konfigurace z Cura 4.6.2 na Cura 4.7."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Aktualizace verze 3.2 na 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Aktualizace verze 4.6.2 na 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Aktualizuje konfigurace z Cura 4.8 na Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Aktualizuje konfigurace z Cura 4.9 na Cura 4.10."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "Aktualizace verze 4.8 na 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "Aktualizace verze 4.9 na 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Aktualizuje konfigurace z Cura 4.6.2 na Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Aktualizuje konfigurace z Cura 2.2 na Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Aktualizace verze 4.6.2 na 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Aktualizace verze 2.2 na 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Aktualizuje konfigurace z Cura 4.2 na Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Aktualizuje konfigurace z Cura 3.2 na Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Aktualizace verze 4.2 na 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Aktualizace verze 3.2 na 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Aktualizuje konfigurace z Cura 4.3 na Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Aktualizuje konfigurace z Cura 2.5 na Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Aktualizace verze 4.3 na 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Aktualizace verze 2.5 na 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Aktualizuje konfigurace z Cura 4.9 na Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Aktualizuje konfigurace z Cura 3.5 na Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "Aktualizace verze 4.9 na 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Aktualizace verze 3.5 na 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Aktualizuje konfigurace z Cura 2.7 na Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Aktualizuje konfigurace z Cura 3.4 na Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Aktualizace verze 2.7 na 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Aktualizace verze 3.4 na 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Aktualizuje konfigurace z Cura 2.6 na Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Aktualizuje konfigurace z Cura 4.7 na Cura 4.8."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Aktualizace verze 2.6 na 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Aktualizace verze 4.7 na 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6420,105 +6413,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "Aktualizace verze 4.11 na 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Aktualizuje konfigurace z Cura 3.3 na Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Zálohujte a obnovte konfiguraci."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Aktualizace verze 3.3 na 3.4"
+msgid "Cura Backups"
+msgstr "Cura zálohy"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Aktualizuje konfigurace z Cura 3.0 na Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Poskytuje podporu pro import profilů Cura."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Aktualizace verze 3.0 na 3.1"
+msgid "Cura Profile Reader"
+msgstr "Čtečka Cura profilu"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Aktualizuje konfigurace z Cura 4.0 na Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Odešle anonymní informace o slicování. Lze deaktivovat pomocí preferencí."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Aktualizace verze 4.0 na 4.1"
+msgid "Slice info"
+msgstr "Informace o slicování"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Aktualizuje konfigurace z Cura 4.4 na Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Poskytuje podporu pro import profilů ze souborů g-kódu."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Aktualizace verze 4.4 na 4.5"
+msgid "G-code Profile Reader"
+msgstr "Čtečka profilu G kódu"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Aktualizuje konfigurace z Cura 2.2 na Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "Zapíše g-kód do komprimovaného archivu."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Aktualizace verze 2.2 na 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Zapisova kompresovaného G kódu"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Aktualizuje konfigurace z Cura 4.1 na Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Rozšíření, které umožňuje uživateli vytvořené skripty pro následné zpracování"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Aktualizace verze 4.1 na 4.2"
+msgid "Post Processing"
+msgstr "Post Processing"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Aktualizuje konfigurace z Cura 3.5 na Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Vytvoří gumovou síť, která blokuje tisk podpory na určitých místech"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Aktualizace verze 3.5 na 4.0"
+msgid "Support Eraser"
+msgstr "Mazač podpor"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Spravuje síťová připojení k síťovým tiskárnám Ultimaker."
+msgid "Provides a preview stage in Cura."
+msgstr "Poskytuje fázi náhledu v Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Síťové připojení Ultimaker"
+msgid "Preview Stage"
+msgstr "Fáze náhledu"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Poskytuje podporu pro čtení souborů modelu."
+msgid "Provides the X-Ray view."
+msgstr "Poskytuje rentgenové zobrazení."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Čtečka trimesh"
+msgid "X-Ray View"
+msgstr "Rentgenový pohled"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Poskytuje podporu pro čtení balíčků formátu Ultimaker."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Poskytuje akce strojů pro stroje Ultimaker (jako je průvodce vyrovnáváním postele, výběr upgradů atd.)."
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Čtečka UFP"
+msgid "Ultimaker machine actions"
+msgstr "Akce zařízení Ultimaker"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6530,35 +6533,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Solid View"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Poskytuje podporu pro psaní souborů 3MF."
+msgid "Allows loading and displaying G-code files."
+msgstr "Povoluje načítání a zobrazení souborů G kódu."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Zapisovač 3MF"
+msgid "G-code Reader"
+msgstr "Čtečka G kódu"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Poskytuje monitorovací scénu v Cuře."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Poskytuje způsob, jak změnit nastavení zařízení (například objem sestavení, velikost trysek atd.)."
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Fáze monitoringu"
+msgid "Machine Settings Action"
+msgstr "Akce nastavení zařízení"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Zkontroluje možné tiskové modely a konfiguraci tisku a poskytne návrhy."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Přijme G-kód a odešle je do tiskárny. Plugin může také aktualizovat firmware."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Kontroler modelu"
+msgid "USB printing"
+msgstr "USB tisk"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Synchronizovat materiály s tiskárnami"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "Než se změny projeví, musíte ukončit a restartovat {}."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "Synchronizuji..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Zjištěny změny z vašeho účtu Ultimaker"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "Chcete synchronizovat materiál a softwarové balíčky s vaším účtem?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Synchronizovat"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Odmítnout a odstranit z účtu"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "Nepovedlo se stáhnout {} zásuvných modulů"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Licenční ujednání zásuvného modulu"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Konvertovat obrázek.."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "Šířka podložky v milimetrech."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Obchod"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "Než se změny v balíčcích projeví, budete muset restartovat Curu."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Nainstalovat"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Nainstalováno"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Premium"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Přejít na webový obchod"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Hledat materiály"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Kompatibilita"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Zařízení"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Podložka"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Podpora"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Kvalita"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Technický datasheet"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Datasheet bezpečnosti"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Zásady tisku"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Webová stránka"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "K instalaci nebo aktualizaci je vyžadováno <a href='%1'>přihlášení</a>"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>Koupit cívky materiálu</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Aktualizace"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Aktualizuji"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Aktualizování"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Zpět"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Zásuvné moduly"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Nainstalování"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Nainstaluje se po restartu"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "Pro aktualizace je potřeba se <a href='%1'>přihlásit</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Downgrade"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Odinstalace"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Soubory od komunity"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Komunitní zásuvné moduly"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Obecné materiály"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Načítám balíčky..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Webová stránka"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "Email"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Přihlaste se, abyste získali ověřené pluginy a materiály pro Ultimaker Cura Enterprise"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Verze"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Naposledy aktualizování"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Ke stažení"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Nainstalovaná rozšíření"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "Žádné rozšíření nebylo nainstalováno."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Nainstalované materiály"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "Žádný materiál nebyl nainstalován."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Zabalená rozšíření"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Zabalené materiály"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Nelze se připojit k databázi balíčku Cura. Zkontrolujte připojení."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "Pro instalaci balíčku musíte přijmout licenční ujednání"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Změny z vašeho účtu"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Schovat"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "Následující balíčky byly přidány:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "Následující balíčky nelze nainstalovat z důvodu nekompatibilní verze Cura:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Potvrdit odinstalaci"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Odinstalujete materiály a / nebo profily, které se stále používají. Potvrzením resetujete následující materiály / profily na výchozí hodnoty."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Materiály"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Profily"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Potvrdit"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Některé věci mohou být v tomto tisku problematické. Kliknutím zobrazíte tipy pro úpravy."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Podpůrná knihovna pro manipulaci s planárními objekty"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "Upravili jste některá nastavení profilu.\n"
+#~ "Chcete tato změněná nastavení zachovat i po přepnutí profilů?\n"
+#~ "V opačném případě můžete změny smazat a načíst výchozí hodnoty z '%1'."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "Pod&ložka"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Vytvořit"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Duplikovat"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Tiskárna: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Aktualizovat profil s aktuálním nastavení/přepsánímy"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Styl:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Aby se tyto změny projevily, budete muset aplikaci restartovat."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Více informací"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Vytvořit"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Synchronizovat s tiskárnami"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Tiskárna"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Jednotka"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Zobrazit online průvodce řešením problémů"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Přidat více materiálů z obchodu"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Uspořádejte všechny modely do všechpodložek"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "Mark&et"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Najděte, spravujte a nainstalujte nové balíčky Cura."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Nástroje"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Poskytuje zobrazení simulace."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/cs_CZ/fdmextruder.def.json.po b/resources/i18n/cs_CZ/fdmextruder.def.json.po
index 3dbaac522c..2b9960136e 100644
--- a/resources/i18n/cs_CZ/fdmextruder.def.json.po
+++ b/resources/i18n/cs_CZ/fdmextruder.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2020-02-20 17:30+0100\n"
 "Last-Translator: DenyCZ <www.github.com/DenyCZ>\n"
 "Language-Team: DenyCZ <www.github.com/DenyCZ>\n"
diff --git a/resources/i18n/cs_CZ/fdmprinter.def.json.po b/resources/i18n/cs_CZ/fdmprinter.def.json.po
index c25f85b6cb..2aa18f3f07 100644
--- a/resources/i18n/cs_CZ/fdmprinter.def.json.po
+++ b/resources/i18n/cs_CZ/fdmprinter.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-12-17 21:11+0100\n"
 "Last-Translator: Miroslav Šustek <sustmidown@centrum.cz>\n"
 "Language-Team: DenyCZ <www.github.com/DenyCZ>\n"
@@ -465,8 +465,8 @@ msgstr "Polygon hlavy a větráku zařízení"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "2D silueta tiskové hlavy (včetně krytů ventilátoru)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -739,6 +739,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "Průměr kola, který pohání materiál v podavači."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Kvalita"
@@ -959,6 +969,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Počet stěn. Při výpočtu podle tloušťky stěny je tato hodnota zaokrouhlena na celé číslo."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Vzdálenost stírání vnější stěny"
@@ -989,14 +1049,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Optimalizujte pořadí, ve kterém se stěny tisknou, aby se snížil počet retrakcí a ujetá vzdálenost. Většina částí bude mít z tohoto povolení prospěch, ale některé mohou ve skutečnosti trvat déle, proto porovnejte odhady doby tisku s optimalizací a bez ní. První vrstva není optimalizována při výběru okraje jako adhezního typu desky."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Vnější stěny před vnitřními"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Když je povoleno, tiskne stěny v pořadí od vnějšku dovnitř. To může pomoci zlepšit rozměrovou přesnost v X a Y při použití plastu s vysokou viskozitou, jako je ABS; může však snížit kvalitu tisku vnějšího povrchu, zejména na převisy."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1009,94 +1079,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Vytiskne další stěnu na každou další vrstvu. Tímto způsobem se výplň zachytí mezi těmito stěnami, což má za následek silnější výtisky."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Kompenzujte překrytí stěn"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Vykompenzujte tok částí tisku, které se tisknou tam, kde je již zeď na místě."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Kompenzujte překrytí vnější stěny"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Vykompenzujte tok částí tisknuté vnější stěny, kde již je zeď na místě."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Kompenzujte překrytí vnitřní stěny"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Kompenzujte tok částí tisknuté vnitřní stěny, kde již je zeď na místě."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Minimální průtok zdi"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Minimální povolený procentuální průtok pro linii stěny. Kompenzace překrytí stěny snižuje průtok stěny, když leží blízko ke stávající zdi. Stěny, jejichž průtok je menší než tato hodnota, budou nahrazeny pohybem. Při použití tohoto nastavení musíte povolit kompenzaci překrytí stěny a vnější stěnu vytisknout před vnitřními stěnami."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Preferovat retrakci"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Je-li tato funkce povolena, je pro retrakční pohyby, které nahrazují stěny, jejichž průtok je pod prahem minimálního průtoku, používáno spíše zatahování."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Vyplnit mezery mezi stěnami"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Vyplní mezery mezi stěnami, kde se žádné stěny nehodí."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Nikde"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Tisk tenkých stěn"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Všude"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Tiskněte kousky modelu, které jsou vodorovně tenčí než velikost trysek."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Vyfiltrujte drobné mezery"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Filtrujte drobné mezery, abyste zmenšili kuličky na vnější straně modelu."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Tisk tenkých stěn"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Tiskněte kousky modelu, které jsou vodorovně tenčí než velikost trysek."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2198,6 +2258,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Model bude zvětšen tímto faktorem, aby bylo kompenzováno smrštění materiálu po vychladnutí."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Krystalický materiál"
@@ -2708,24 +2788,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "Prvních několik vrstev je vytištěno pomaleji než zbytek modelu, aby se dosáhlo lepší přilnavosti k sestavovací desce a zlepšila se celková úspěšnost tisků. Rychlost se v těchto vrstvách postupně zvyšuje."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Vyrovnat tok vlákna"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Tiskněte tenčí než normální čáry rychleji, takže množství materiálu vytlačovaného za sekundu zůstává stejné. Tenké kousky ve vašem modelu mohou vyžadovat čáry vytištěné s menší šířkou čáry, než je uvedeno v nastavení. Toto nastavení řídí změny rychlosti těchto linek."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Maximální rychlost pro vyrovnávání průtoku"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Maximální rychlost tisku při úpravě rychlosti tisku za účelem vyrovnání toku."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4463,6 +4533,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "Vytlačovací stroj se používá pro tisk límce / okraje / raftu. To se používá při vícenásobném vytlačování."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Počet linek okraje"
@@ -4627,6 +4737,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "Vzdálenost mezi liniemi raftů pro horní vrstvy raftů. Rozestup by měl být roven šířce čáry, takže povrch je pevný."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Tloušťka prostředku raftu"
@@ -5127,6 +5247,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "Maximální odchylka povolená při snižování rozlišení pro nastavení Maximální rozlišení. Pokud toto zvýšíte, bude tisk méně přesný, ale g-kód bude menší. Maximální odchylka je limit pro maximální rozlišení, takže pokud dojde ke konfliktu, bude maximální odchylka vždy platná."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Speciální módy"
@@ -6421,6 +6551,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "Malé funkce v první vrstvě budou vytištěny při tomto procentuálním poměru jejich normální rychlosti tisku. Pomalejší tisk může pomoci s přilnavostí a přesností."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Nastavení příkazové řádky"
@@ -6480,6 +6640,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Transformační matice, která se použije na model při načítání ze souboru."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "2D silueta tiskové hlavy (včetně krytů ventilátoru)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Vnější stěny před vnitřními"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Když je povoleno, tiskne stěny v pořadí od vnějšku dovnitř. To může pomoci zlepšit rozměrovou přesnost v X a Y při použití plastu s vysokou viskozitou, jako je ABS; může však snížit kvalitu tisku vnějšího povrchu, zejména na převisy."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Kompenzujte překrytí stěn"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Vykompenzujte tok částí tisku, které se tisknou tam, kde je již zeď na místě."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Kompenzujte překrytí vnější stěny"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Vykompenzujte tok částí tisknuté vnější stěny, kde již je zeď na místě."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Kompenzujte překrytí vnitřní stěny"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Kompenzujte tok částí tisknuté vnitřní stěny, kde již je zeď na místě."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Minimální průtok zdi"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Minimální povolený procentuální průtok pro linii stěny. Kompenzace překrytí stěny snižuje průtok stěny, když leží blízko ke stávající zdi. Stěny, jejichž průtok je menší než tato hodnota, budou nahrazeny pohybem. Při použití tohoto nastavení musíte povolit kompenzaci překrytí stěny a vnější stěnu vytisknout před vnitřními stěnami."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Preferovat retrakci"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Je-li tato funkce povolena, je pro retrakční pohyby, které nahrazují stěny, jejichž průtok je pod prahem minimálního průtoku, používáno spíše zatahování."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Vyplnit mezery mezi stěnami"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Vyplní mezery mezi stěnami, kde se žádné stěny nehodí."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Nikde"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Všude"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Vyfiltrujte drobné mezery"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Filtrujte drobné mezery, abyste zmenšili kuličky na vnější straně modelu."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Vyrovnat tok vlákna"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Tiskněte tenčí než normální čáry rychleji, takže množství materiálu vytlačovaného za sekundu zůstává stejné. Tenké kousky ve vašem modelu mohou vyžadovat čáry vytištěné s menší šířkou čáry, než je uvedeno v nastavení. Toto nastavení řídí změny rychlosti těchto linek."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Maximální rychlost pro vyrovnávání průtoku"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Maximální rychlost tisku při úpravě rychlosti tisku za účelem vyrovnání toku."
+
 #~ msgctxt "machine_max_feedrate_e label"
 #~ msgid "Maximum Feedrate"
 #~ msgstr "Maximální feedrate"
diff --git a/resources/i18n/cura.pot b/resources/i18n/cura.pot
index 629b2c3a6a..e4a9ab9554 100644
--- a/resources/i18n/cura.pot
+++ b/resources/i18n/cura.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -18,4269 +18,4392 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid ""
-"Please sync the material profiles with your printers before starting to "
-"print."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt ""
+"@info Don't translate {machine_name}, since it gets replaced by a printer "
+"name!"
 msgid ""
-"The build volume height has been reduced due to the value of the \"Print "
-"Sequence\" setting to prevent the gantry from colliding with printed models."
+"New features or bug-fixes may be available for your {machine_name}! If you "
+"haven't done so already, it is recommended to update the firmware on your "
+"printer to version {latest_version}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Save to Removable Drive"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid ""
-"The printer(s) below cannot be connected because they are part of a group"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "Save to Removable Drive {0}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+msgctxt "@info:status"
+msgid "There are no file formats available to write with!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#, python-brace-format
+msgctxt "@info:progress Don't translate the XML tags <filename>!"
+msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+msgctxt "@info:title"
+msgid "Saving"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
-msgctxt "@item:inlistbox"
-msgid "All Files (*)"
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#, python-brace-format
+msgctxt "@info:status Don't translate the tag {device}!"
+msgid "Could not find a file name when trying to write to {device}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid ""
-"The visual profile is designed to print visual prototypes and models with "
-"the intent of high visual and surface quality."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Could not save to removable drive {0}: {1}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid ""
-"The engineering profile is designed to print functional prototypes and end-"
-"use parts with the intent of better accuracy and for closer tolerances."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Saved to Removable Drive {0} as {1}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+msgctxt "@info:title"
+msgid "File Saved"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid ""
-"The draft profile is designed to print initial prototypes and concept "
-"validation with the intent of significant print time reduction."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+msgctxt "@action:button"
+msgid "Eject"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#, python-brace-format
+msgctxt "@action"
+msgid "Eject removable device {0}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Ejected {0}. You can now safely remove the drive."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
-msgid "Login failed"
+msgid "Safely Remove Hardware"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Finding new location for objects"
+msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Finding Location"
+msgid "Warning"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "AMF File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
+msgctxt "@info:status"
 msgid ""
-"Failed to connect to Digital Factory to sync materials with some of the "
-"printers."
+"Cura has detected material profiles that were not yet installed on the host "
+"printer of group {0}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"You are attempting to connect to {0} but it is not the host of a group. You "
+"can visit the web page to configure it as a group host."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+msgctxt "@info:title"
+msgid "Not a group host"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+msgctxt "@info:status"
+msgid "Sending Print Job"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+msgctxt "@info:status"
+msgid "Print job queue is full. The printer can't accept a new job."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+msgctxt "@info:status"
+msgid "Please wait until the current job has been sent."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt ""
-"@info 'width', 'depth' and 'height' are variable names that must NOT be "
-"translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+msgctxt "@info:title"
+msgid "Print error"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgid "Print job was successfully sent to the printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
-msgid "Warning"
+msgid "Data Sent"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgid ""
+"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
+" Manage your print queue and monitor your prints from anywhere connecting "
+"your printer to Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
-msgid "Error"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
+msgid "Are you ready for cloud printing?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+msgctxt "@action"
+msgid "Get started"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+msgctxt "@action"
+msgid "Learn more"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid ""
+"You are attempting to connect to a printer that is not running Ultimaker "
+"Connect. Please update the printer to the latest firmware."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+msgctxt "@properties:tooltip"
+msgid "Print over network"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+msgctxt "@info:status"
+msgid "Connected over the network"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+msgctxt "info:status"
+msgid "New printer detected from your Ultimaker account"
+msgid_plural "New printers detected from your Ultimaker account"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#, python-brace-format
+msgctxt "info:status Filled in with printer name and printer model."
+msgid "Adding printer {name} ({model}) from your account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#, python-brace-format
+msgctxt "info:{0} gets replaced by a number of printers"
+msgid "... and {0} other"
+msgid_plural "... and {0} others"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+msgctxt "info:status"
+msgid "Printers added from Digital Factory:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+msgctxt "info:status"
+msgid "A cloud connection is not available for a printer"
+msgid_plural "A cloud connection is not available for some printers"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+msgctxt "info:status"
+msgid "This printer is not linked to the Digital Factory:"
+msgid_plural "These printers are not linked to the Digital Factory:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+msgctxt "info:name"
+msgid "Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#, python-brace-format
+msgctxt "info:status"
+msgid "To establish a connection, please visit the {website_link}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right."
-"</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start "
-"up. It was possibly caused by some incorrect configuration files. We suggest "
-"to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</"
-"p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</"
-"p>\n"
-"                "
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+msgctxt "@action:button"
+msgid "Keep printer configurations"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
+msgid "Remove printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "{printer_name} will be removed until the next account sync."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
-msgid "Crash Report"
+msgid "Remove printers?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#, python-brace-format
+msgctxt "@label"
 msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report "
-"to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report "
-"automatically to our servers</p>\n"
-"        "
-msgstr ""
+"You are about to remove {0} printer from Cura. This action cannot be "
+"undone.\n"
+"Are you sure you want to continue?"
+msgid_plural ""
+"You are about to remove {0} printers from Cura. This action cannot be "
+"undone.\n"
+"Are you sure you want to continue?"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+msgctxt "@label"
+msgid ""
+"You are about to remove all printers from Cura. This action cannot be "
+"undone.\n"
+"Are you sure you want to continue?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and "
+"material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</"
+"p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality "
+"guide</a></p>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
+msgctxt "@info:title"
+msgid "Simulation View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid ""
-"Unable to start a new sign in process. Check if another sign in attempt is "
-"still active."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+msgctxt "@error"
+msgid "There is no workspace yet to write. Please add a printer first."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+msgctxt "@error:zip"
+msgid ""
+"The operating system does not allow saving a project file to this location "
+"or with this file name."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid ""
+"Slicing failed with an unexpected error. Please consider reporting a bug on "
+"our issue tracker."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
 msgid ""
-"Settings have been changed to match the current availability of extruders:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
+"Unable to slice with the current material as it is incompatible with the "
+"selected machine or configuration."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
+msgid "Unable to slice"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"Unable to slice with the current settings. The following settings have "
+"errors: {0}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
+msgctxt "@info:status"
 msgid ""
-"The file <filename>{0}</filename> already exists. Are you sure you want to "
-"overwrite it?"
+"Unable to slice due to some per-model settings. The following settings have "
+"errors on one or more models: {error_labels}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
 msgctxt "@info:status"
-msgid "Invalid file URL:"
+msgid ""
+"Unable to slice because the prime tower or prime position(s) are invalid."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
 msgid ""
-"Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+"Unable to slice because there are objects associated with disabled Extruder "
+"%s."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"Failed to export profile to <filename>{0}</filename>: Writer plugin reported "
-"failure."
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
 msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgid "Information"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid ""
-"Can't import profile from <filename>{0}</filename> before a printer is added."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid ""
-"This profile <filename>{0}</filename> contains incorrect data, could not "
-"import it."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid ""
+"Project file <filename>{0}</filename> contains an unknown machine type "
+"<message>{1}</message>. Cannot import the machine. Models will be imported "
+"instead."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid ""
+"Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}"
+"</message>."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
 #, python-brace-format
-msgctxt "@info:status"
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
 msgid ""
-"Quality type '{0}' is not compatible with the current active machine "
-"definition '{1}'."
+"Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
 #, python-brace-format
-msgctxt "@info:status"
+msgctxt "@info:error Don't translate the XML tag <filename>!"
 msgid ""
-"Warning: The profile is not visible because its quality type '{0}' is not "
-"available for the current configuration. Switch to a material/nozzle "
-"combination that can use this quality type."
+"Project file <filename>{0}</filename> is made using profiles that are "
+"unknown to this version of Ultimaker Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
+msgid "3MF File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
-msgctxt "@item:inlistbox"
-msgid "X3D File"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
 msgctxt "@info:title"
 msgid "Backups"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
 msgctxt "@info:backup_status"
 msgid "There was an error while uploading your backup."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
 msgctxt "@info:backup_status"
 msgid "Creating your backup..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
 msgctxt "@info:backup_status"
 msgid "There was an error while creating your backup."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
 msgctxt "@info:backup_status"
 msgid "Uploading your backup..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
 msgctxt "@info:backup_status"
 msgid "Your backup has finished uploading."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
 msgctxt "@error:file_size"
 msgid "The backup exceeds the maximum file size."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
 msgctxt "@item:inmenu"
 msgid "Manage backups"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
 msgid "Support Blocker"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
 msgid "Create a volume in which supports are not printed."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Save to Removable Drive"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
-#, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "Save to Removable Drive {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
-msgctxt "@info:status"
-msgid "There are no file formats available to write with!"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
-#, python-brace-format
-msgctxt "@info:progress Don't translate the XML tags <filename>!"
-msgid "Saving to Removable Drive <filename>{0}</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
-msgctxt "@info:title"
-msgid "Saving"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
-#, python-brace-format
-msgctxt "@info:status Don't translate the tag {device}!"
-msgid "Could not find a file name when trying to write to {device}."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Could not save to removable drive {0}: {1}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
+msgctxt "@label"
+msgid "Installed Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
+msgctxt "@label"
+msgid "Installed Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
+msgctxt "@label"
+msgid "Bundled Plugins"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
+msgctxt "@label"
+msgid "Bundled Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
 msgctxt "@info:status"
-msgid "Saved to Removable Drive {0} as {1}"
+msgid ""
+"The highlighted areas indicate either missing or extraneous surfaces. Fix "
+"your model and open it again into Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
 msgctxt "@info:title"
-msgid "File Saved"
+msgid "Model Errors"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
 msgctxt "@action:button"
-msgid "Eject"
+msgid "Learn more"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#, python-brace-format
-msgctxt "@action"
-msgid "Eject removable device {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
 msgctxt "@info:status"
-msgid "Ejected {0}. You can now safely remove the drive."
+msgid "Parsing G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
 msgctxt "@info:title"
-msgid "Safely Remove Hardware"
+msgid "G-code Details"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Failed to eject {0}. Another program may be using the drive."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid ""
+"Make sure the g-code is suitable for your printer and printer configuration "
+"before sending the file to it. The g-code representation may not be accurate."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
 msgctxt "@action"
-msgid "Update Firmware"
+msgid "Machine Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Project file <filename>{0}</filename> contains an unknown machine type "
-"<message>{1}</message>. Cannot import the machine. Models will be imported "
-"instead."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid ""
+"A USB print is in progress, closing Cura will stop this print. Are you sure?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
 msgid ""
-"Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}"
-"</message>."
+"A print is still in progress. Cura cannot start another print via USB until "
+"the previous print has completed."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid ""
-"Project file <filename>{0}</filename> is made using profiles that are "
-"unknown to this version of Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt ""
+"@info 'width', 'depth' and 'height' are variable names that must NOT be "
+"translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Processing Layers"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid ""
-"Slicing failed with an unexpected error. Please consider reporting a bug on "
-"our issue tracker."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
+msgctxt "@label"
+msgid "Default"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid ""
+"The visual profile is designed to print visual prototypes and models with "
+"the intent of high visual and surface quality."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
+msgctxt "@label"
+msgid "Engineering"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
 msgid ""
-"Unable to slice with the current material as it is incompatible with the "
-"selected machine or configuration."
+"The engineering profile is designed to print functional prototypes and end-"
+"use parts with the intent of better accuracy and for closer tolerances."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
-msgctxt "@info:title"
-msgid "Unable to slice"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
+msgctxt "@label"
+msgid "Draft"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
 msgid ""
-"Unable to slice with the current settings. The following settings have "
-"errors: {0}"
+"The draft profile is designed to print initial prototypes and concept "
+"validation with the intent of significant print time reduction."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
 #, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice due to some per-model settings. The following settings have "
-"errors on one or more models: {error_labels}"
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid ""
-"Unable to slice because the prime tower or prime position(s) are invalid."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
+msgctxt "@label"
+msgid "Unknown"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
 msgid ""
-"Unable to slice because there are objects associated with disabled Extruder "
-"%s."
+"The printer(s) below cannot be connected because they are part of a group"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
 msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
+msgid "Calculated"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid ""
+"Please sync the material profiles with your printers before starting to "
+"print."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
+msgctxt "@label"
+msgid "Custom Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
+msgctxt "@label"
+msgid "Custom"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
+msgctxt "@label"
+msgid "Custom profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid ""
-"A USB print is in progress, closing Cura will stop this print. Are you sure?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid ""
-"A print is still in progress. Cura cannot start another print via USB until "
-"the previous print has completed."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid ""
+"Failed to connect to Digital Factory to sync materials with some of the "
+"printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid ""
-"Make sure the g-code is suitable for your printer and printer configuration "
-"before sending the file to it. The g-code representation may not be accurate."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt ""
-"@info Don't translate {machine_name}, since it gets replaced by a printer "
-"name!"
-msgid ""
-"New features or bug-fixes may be available for your {machine_name}! If you "
-"haven't done so already, it is recommended to update the firmware on your "
-"printer to version {latest_version}."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
-msgctxt "@info:title"
-msgid "Simulation View"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
+msgid ""
+"The build volume height has been reduced due to the value of the \"Print "
+"Sequence\" setting to prevent the gantry from colliding with printed models."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
 msgctxt "@info:title"
-msgid "No layers to show"
+msgid "Build Volume"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
-msgctxt "@info:status"
-msgid "Connected over the network"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid ""
+"The file <filename>{0}</filename> already exists. Are you sure you want to "
+"overwrite it?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
 msgctxt "@info:status"
-msgid "tomorrow"
+msgid "Invalid file URL:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
-msgctxt "@info:status"
-msgid "Please wait until the current job has been sent."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid ""
+"Settings have been changed to match the current availability of extruders:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
 msgctxt "@info:title"
-msgid "Print error"
+msgid "Settings updated"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
-msgctxt "@info:status"
-msgid "Print job was successfully sent to the printer."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
-msgctxt "@info:title"
-msgid "Data Sent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid ""
+"Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid ""
-"You are attempting to connect to a printer that is not running Ultimaker "
-"Connect. Please update the printer to the latest firmware."
+"Failed to export profile to <filename>{0}</filename>: Writer plugin reported "
+"failure."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
 msgctxt "@info:title"
-msgid "Update your printer"
+msgid "Export succeeded"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid ""
+"Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
 #, python-brace-format
-msgctxt "@info:status"
+msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid ""
-"Cura has detected material profiles that were not yet installed on the host "
-"printer of group {0}."
+"This profile <filename>{0}</filename> contains incorrect data, could not "
+"import it."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
 #, python-brace-format
 msgctxt "@info:status"
-msgid ""
-"You are attempting to connect to {0} but it is not the host of a group. You "
-"can visit the web page to configure it as a group host."
+msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
-"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
-" Manage your print queue and monitor your prints from anywhere connecting "
-"your printer to Digital Factory"
+"Quality type '{0}' is not compatible with the current active machine "
+"definition '{1}'."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
-msgctxt "@info:title"
-msgid "Are you ready for cloud printing?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"Warning: The profile is not visible because its quality type '{0}' is not "
+"available for the current configuration. Switch to a material/nozzle "
+"combination that can use this quality type."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
-msgctxt "@action"
-msgid "Get started"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
-msgctxt "@action"
-msgid "Learn more"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid ""
+"Unable to start a new sign in process. Check if another sign in attempt is "
+"still active."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
-msgctxt "@info:status"
-msgid "Connected via cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
-msgctxt "info:status"
-msgid "New printer detected from your Ultimaker account"
-msgid_plural "New printers detected from your Ultimaker account"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
-#, python-brace-format
-msgctxt "info:status Filled in with printer name and printer model."
-msgid "Adding printer {name} ({model}) from your account"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
-#, python-brace-format
-msgctxt "info:{0} gets replaced by a number of printers"
-msgid "... and {0} other"
-msgid_plural "... and {0} others"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
-msgctxt "info:status"
-msgid "Printers added from Digital Factory:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
-msgctxt "info:status"
-msgid "A cloud connection is not available for a printer"
-msgid_plural "A cloud connection is not available for some printers"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
-msgctxt "info:status"
-msgid "This printer is not linked to the Digital Factory:"
-msgid_plural "These printers are not linked to the Digital Factory:"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right."
+"</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start "
+"up. It was possibly caused by some incorrect configuration files. We suggest "
+"to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</"
+"p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</"
+"p>\n"
+"                "
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
-msgctxt "info:name"
-msgid "Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
+msgctxt "@action:button"
+msgid "Send crash report to Ultimaker"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
-#, python-brace-format
-msgctxt "info:status"
-msgid "To establish a connection, please visit the {website_link}"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
+msgctxt "@action:button"
+msgid "Show detailed crash report"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Keep printer configurations"
+msgid "Show configuration folder"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Remove printers"
+msgid "Backup and Reset Configuration"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "{printer_name} will be removed until the next account sync."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report "
+"to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report "
+"automatically to our servers</p>\n"
+"        "
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "Are you sure you want to remove {printer_name} temporarily?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
-msgctxt "@title:window"
-msgid "Remove printers?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
-#, python-brace-format
-msgctxt "@label"
-msgid ""
-"You are about to remove {0} printer from Cura. This action cannot be "
-"undone.\n"
-"Are you sure you want to continue?"
-msgid_plural ""
-"You are about to remove {0} printers from Cura. This action cannot be "
-"undone.\n"
-"Are you sure you want to continue?"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid ""
-"You are about to remove all printers from Cura. This action cannot be "
-"undone.\n"
-"Are you sure you want to continue?"
+msgid "Cura language"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
+msgctxt "@label"
+msgid "OS language"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
+msgctxt "@label"
+msgid "Qt version"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
+msgctxt "@label"
+msgid "PyQt version"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
+msgctxt "@label"
+msgid "Not yet initialized<br/>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
-msgctxt "@info:status"
-msgid ""
-"The highlighted areas indicate either missing or extraneous surfaces. Fix "
-"your model and open it again into Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:title"
-msgid "Model Errors"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
-msgctxt "@error"
-msgid "There is no workspace yet to write. Please add a printer first."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
-msgctxt "@error:zip"
-msgid ""
-"The operating system does not allow saving a project file to this location "
-"or with this file name."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
+msgctxt "@info"
+msgid "In order to monitor your print from Cura, please connect the printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and "
-"material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</"
-"p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality "
-"guide</a></p>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
 msgid "Normal model"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
 msgid "Print as support"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
+msgctxt "@label"
+msgid ""
+"Firmware is the piece of software running directly on your 3D printer. This "
+"firmware controls the step motors, regulates the temperature and ultimately "
+"makes your printer work."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid ""
+"The firmware shipping with new printers works, but new versions tend to have "
+"more features and improvements."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid ""
+"Firmware can not be updated because there is no connection with the printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid ""
+"Firmware can not be updated because the connection with the printer does not "
+"support upgrading firmware."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
 msgctxt "@title:window"
-msgid "Cura Backups"
+msgid "Select custom firmware"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
+msgctxt "@label"
+msgid "Updating firmware."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
+msgctxt "@label"
+msgid "Firmware update completed."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
+msgctxt "@label"
+msgid "Firmware update failed due to an unknown error."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
+msgctxt "@label"
+msgid "Firmware update failed due to an communication error."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
+msgctxt "@label"
+msgid "Firmware update failed due to an input/output error."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
+msgctxt "@label"
+msgid "Firmware update failed due to missing firmware."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid ""
-"You will need to restart Cura before your backup is restored. Do you want to "
-"close Cura now?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid ""
-"You don't have any backups currently. Use the 'Backup Now' button to create "
-"one."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
+msgctxt "@label link to Connect and Cloud interfaces"
+msgid "Manage printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
+msgctxt "@label"
+msgid "Glass"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
+msgctxt "@info"
 msgid ""
-"During the preview phase, you'll be limited to 5 visible backups. Remove a "
-"backup to see older ones."
+"Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click "
+"\"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
+msgctxt "@label:status"
+msgid "Loading..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
+msgctxt "@label:status"
+msgid "Unavailable"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
+msgctxt "@label:status"
+msgid "Unreachable"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
+msgctxt "@label:status"
+msgid "Idle"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+msgctxt "@label:status"
+msgid "Printing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
-msgid "Build plate shape"
+msgid "Untitled"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
-msgid "Origin at center"
+msgid "Anonymous"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
+msgctxt "@label:status"
+msgid "Requires configuration changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
+msgctxt "@action:button"
+msgid "Details"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
+msgctxt "@action:button"
+msgid "Override"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
-msgid "X min"
-msgstr ""
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural ""
+"The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
-msgid "Y min"
+msgid ""
+"The printer %1 is assigned, but the job contains an unknown material "
+"configuration."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
-msgid "X max"
+msgid "Change material %1 from %2 to %3."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
-msgid "Y max"
+msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
-msgid "Gantry Height"
+msgid "Change print core %1 from %2 to %3."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
-msgid "Number of Extruders"
+msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
+msgid ""
+"Override will use the specified settings with the existing printer "
+"configuration. This may result in a failed print."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
+msgctxt "@label"
+msgid "Aluminum"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
 msgctxt "@label"
-msgid "Nozzle size"
+msgid "Printer selection"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
+msgctxt "@title:window"
+msgid "Connect to Networked Printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
-msgid "Nozzle offset X"
+msgid ""
+"To print directly to your printer over the network, please make sure your "
+"printer is connected to the network using a network cable or by connecting "
+"your printer to your WIFI network. If you don't connect Cura with your "
+"printer, you can still use a USB drive to transfer g-code files to your "
+"printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
-msgid "Nozzle offset Y"
+msgid "Select your printer from the list below:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
+msgctxt "@action:button"
+msgid "Edit"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
+msgctxt "@action:button"
+msgid "Remove"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
+msgctxt "@action:button"
+msgid "Refresh"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
-msgid "Cooling Fan Number"
+msgid ""
+"If your printer is not listed, read the <a href='%1'>network printing "
+"troubleshooting guide</a>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+msgctxt "@label"
+msgid "Type"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+msgctxt "@label"
+msgid "Firmware version"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+msgctxt "@label"
+msgid "Address"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
+msgctxt "@label"
+msgid "This printer is not set up to host a group of printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
-msgid ""
-"Firmware is the piece of software running directly on your 3D printer. This "
-"firmware controls the step motors, regulates the temperature and ultimately "
-"makes your printer work."
+msgid "This printer is the host for a group of %1 printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
-msgid ""
-"The firmware shipping with new printers works, but new versions tend to have "
-"more features and improvements."
+msgid "The printer at this address has not yet responded."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
+msgid "Connect"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
+msgctxt "@title:window"
+msgid "Invalid IP address"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+msgctxt "@text"
+msgid "Please enter a valid IP address."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
+msgctxt "@title:window"
+msgid "Printer Address"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
-msgid ""
-"Firmware can not be updated because there is no connection with the printer."
+msgid "Enter the IP address of your printer on the network."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
 msgctxt "@label"
-msgid ""
-"Firmware can not be updated because the connection with the printer does not "
-"support upgrading firmware."
+msgid "Unavailable printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+msgctxt "@label"
+msgid "Move to top"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
-msgid "Updating firmware."
+msgid "Delete"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
-msgid "Firmware update completed."
+msgid "Resume"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
+msgid "Pausing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
+msgid "Resuming..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
+msgid "Pause"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
+msgid "Aborting..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Abort"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+msgctxt "@window:title"
+msgid "Move print job to top"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to delete %1?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
+msgctxt "@window:title"
+msgid "Delete print job"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to abort %1?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
+msgctxt "@window:title"
+msgid "Abort print"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
 msgctxt "@label"
-msgid "Post Processing Scripts"
+msgid "Starts"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
 msgctxt "@label"
-msgid "Settings"
+msgid "Show 5 Detailed Layers On Top"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
 msgctxt "@action:label"
 msgid "Height (mm)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
 msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
+msgid "The maximum distance of each pixel from \"Base.\""
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
 msgctxt "@action:label"
 msgid "Base (mm)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
+msgid "The base height from the build plate in millimeters."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
 msgctxt "@action:label"
 msgid "Width (mm)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
+msgid "The width in millimeters on the build plate"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
 msgctxt "@action:label"
 msgid "Depth (mm)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid ""
-"For lithophanes dark pixels should correspond to thicker locations in order "
-"to block more light coming through. For height maps lighter pixels signify "
-"higher terrain, so lighter pixels should correspond to thicker locations in "
-"the generated 3D model."
+msgid "The depth in millimeters on the build plate"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
 msgctxt "@item:inlistbox"
 msgid "Darker is higher"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
 msgctxt "@item:inlistbox"
 msgid "Lighter is higher"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
 msgid ""
-"For lithophanes a simple logarithmic model for translucency is available. "
-"For height maps the pixel values correspond to heights linearly."
+"For lithophanes dark pixels should correspond to thicker locations in order "
+"to block more light coming through. For height maps lighter pixels signify "
+"higher terrain, so lighter pixels should correspond to thicker locations in "
+"the generated 3D model."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
 msgctxt "@item:inlistbox"
 msgid "Linear"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
 msgctxt "@item:inlistbox"
 msgid "Translucency"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
 msgid ""
-"The percentage of light penetrating a print with a thickness of 1 "
-"millimeter. Lowering this value increases the contrast in dark regions and "
-"decreases the contrast in light regions of the image."
+"For lithophanes a simple logarithmic model for translucency is available. "
+"For height maps the pixel values correspond to heights linearly."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
 msgctxt "@action:label"
 msgid "1mm Transmittance (%)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
+msgid ""
+"The percentage of light penetrating a print with a thickness of 1 "
+"millimeter. Lowering this value increases the contrast in dark regions and "
+"decreases the contrast in light regions of the image."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
 msgctxt "@action:label"
 msgid "Smoothing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
 msgid "OK"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid ""
-"To make sure your prints will come out great, you can now adjust your "
-"buildplate. When you click 'Move to Next Position' the nozzle will move to "
-"the different positions that can be adjusted."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid ""
-"For every position; insert a piece of paper under the nozzle and adjust the "
-"print build plate height. The print build plate height is right when the "
-"paper is slightly gripped by the tip of the nozzle."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid ""
-"Ultimaker Cura collects anonymous data in order to improve the print quality "
-"and user experience. Below is an example of all the data that is shared:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+msgctxt "@button"
+msgid "Want more?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid ""
+"You will need to restart Cura before your backup is restored. Do you want to "
+"close Cura now?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
+msgctxt "@button"
+msgid "Sign in"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid ""
+"You don't have any backups currently. Use the 'Backup Now' button to create "
+"one."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid ""
+"During the preview phase, you'll be limited to 5 visible backups. Remove a "
+"backup to see older ones."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
-msgctxt "@label"
-msgid "Generic Materials"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid ""
+"Ultimaker Cura collects anonymous data in order to improve the print quality "
+"and user experience. Below is an example of all the data that is shared:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Website"
+msgid "Post Processing Scripts"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Email"
+msgid "Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid ""
-"Please sign in to get verified plugins and materials for Ultimaker Cura "
-"Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Version"
+msgid "Please select any upgrades made to this Ultimaker Original"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Last updated"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "Brand"
+msgid ""
+"To make sure your prints will come out great, you can now adjust your "
+"buildplate. When you click 'Move to Next Position' the nozzle will move to "
+"the different positions that can be adjusted."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "Downloads"
+msgid ""
+"For every position; insert a piece of paper under the nozzle and adjust the "
+"print build plate height. The print build plate height is right when the "
+"paper is slightly gripped by the tip of the nozzle."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
 msgctxt "@info"
-msgid "No plugin has been installed."
+msgid "Ultimaker Verified Plug-in"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
 msgctxt "@info"
-msgid "No material has been installed."
+msgid "Ultimaker Verified Package"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
+msgctxt "@button"
+msgid "Plugins"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
 msgctxt "@info"
-msgid ""
-"Could not connect to the Cura Package database. Please check your connection."
+msgid "Search in the browser"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
+msgctxt "@button"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
+msgid "By"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
 msgctxt "@button"
-msgid "Dismiss"
+msgid "Disable"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Next"
+msgid "Downgrading..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
+msgctxt "@button"
+msgid "Downgrade"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
-msgctxt "@label"
-msgid ""
-"The following packages can not be installed because of an incompatible Cura "
-"version:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
+msgctxt "@button"
+msgid "Install"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid ""
-"You are uninstalling materials and/or profiles that are still in use. "
-"Confirming will reset the following materials/profiles to their defaults."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Update"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
+msgctxt "@text"
+msgid ""
+"Streamline your workflow and customize your Ultimaker Cura experience with "
+"plugins contributed by our amazing community of users."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
-msgctxt "@label"
-msgid "Travels"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
-msgctxt "@label"
-msgid "Helpers"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
-msgctxt "@label"
-msgid "Shell"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
-msgctxt "@label"
-msgid "Starts"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Only Show Top Layers"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
+msgctxt "@text"
+msgid "Please read and agree with the plugin licence."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-msgctxt "@label"
-msgid "Glass"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
+msgctxt "@button"
+msgid "Accept"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
-msgctxt "@info"
-msgid ""
-"Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click "
-"\"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
-msgctxt "@label:status"
-msgid "Loading..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
-msgctxt "@label:status"
-msgid "Unavailable"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
-msgctxt "@label:status"
-msgid "Unreachable"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
-msgctxt "@label:status"
-msgid "Idle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
-msgctxt "@label:status"
-msgid "Printing"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
-msgctxt "@label"
-msgid "Untitled"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
+msgctxt "@text"
+msgid ""
+"Manage your Ultimaker Cura plugins and material profiles here. Make sure to "
+"keep your plugins up to date and backup your setup regularly."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
-msgctxt "@label"
-msgid "Anonymous"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
-msgctxt "@label:status"
-msgid "Requires configuration changes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid ""
+"Select and install material profiles optimised for your Ultimaker 3D "
+"printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
-msgctxt "@action:button"
-msgid "Details"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "First available"
+msgid "Nozzle size"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Queued"
+msgid "mm"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgid "Nozzle offset X"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "Print jobs"
+msgid "Nozzle offset Y"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Total print time"
+msgid "Cooling Fan Number"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Printer selection"
+msgid "X (Width)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+msgctxt "@label"
+msgid "Y (Depth)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
-msgctxt "@action:button"
-msgid "Override"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural ""
-"The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] ""
-msgstr[1] ""
+msgid "Build plate shape"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid ""
-"The printer %1 is assigned, but the job contains an unknown material "
-"configuration."
+msgid "Origin at center"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
 msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
+msgid "Heated bed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
 msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
+msgid "Heated build volume"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
 msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
+msgid "G-code flavor"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
 msgctxt "@label"
-msgid ""
-"Override will use the specified settings with the existing printer "
-"configuration. This may result in a failed print."
+msgid "X min"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
 msgctxt "@label"
-msgid "Aluminum"
+msgid "Y min"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
-msgctxt "@title:window"
-msgid "Connect to Networked Printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid ""
-"To print directly to your printer over the network, please make sure your "
-"printer is connected to the network using a network cable or by connecting "
-"your printer to your WIFI network. If you don't connect Cura with your "
-"printer, you can still use a USB drive to transfer g-code files to your "
-"printer."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid "Select your printer from the list below:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
-msgctxt "@action:button"
-msgid "Edit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
-msgctxt "@action:button"
-msgid "Remove"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
-msgctxt "@action:button"
-msgid "Refresh"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
-msgctxt "@label"
-msgid ""
-"If your printer is not listed, read the <a href='%1'>network printing "
-"troubleshooting guide</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
-msgctxt "@label"
-msgid "Type"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
-msgctxt "@label"
-msgid "Firmware version"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
-msgctxt "@label"
-msgid "Address"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
-msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
-msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
-msgctxt "@label"
-msgid "The printer at this address has not yet responded."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
-msgctxt "@action:button"
-msgid "Connect"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
 msgctxt "@title:window"
-msgid "Invalid IP address"
+msgid "New project"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
-msgctxt "@text"
-msgid "Please enter a valid IP address."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid ""
+"Are you sure you want to start a new project? This will clear the build "
+"plate and any unsaved settings."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
-msgctxt "@title:window"
-msgid "Printer Address"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
 msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
+msgid "Build plate"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
-msgctxt "@label"
-msgid "Move to top"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid ""
+"The target temperature of the heated bed. The bed will heat up or cool down "
+"towards this temperature. If this is 0, the bed heating is turned off."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
-msgctxt "@label"
-msgid "Delete"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
-msgctxt "@label"
-msgid "Resume"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
-msgctxt "@label"
-msgid "Pausing..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
-msgctxt "@label"
-msgid "Resuming..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
-msgctxt "@label"
-msgid "Pause"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid ""
+"Heat the bed in advance before printing. You can continue adjusting your "
+"print while it is heating, and you won't have to wait for the bed to heat up "
+"when you're ready to print."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
-msgctxt "@label"
-msgid "Aborting..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
 msgctxt "@label"
-msgid "Abort"
+msgid "Printer control"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
-msgctxt "@window:title"
-msgid "Move print job to top"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
-msgctxt "@window:title"
-msgid "Delete print job"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
-msgctxt "@window:title"
-msgid "Abort print"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid ""
+"Send a custom G-code command to the connected printer. Press 'enter' to send "
+"the command."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid ""
+"The target temperature of the hotend. The hotend will heat up or cool down "
+"towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
 msgid ""
-"Some things could be problematic in this print. Click to see tips for "
-"adjustment."
+"Heat the hotend in advance before printing. You can continue adjusting your "
+"print while it is heating, and you won't have to wait for the hotend to heat "
+"up when you're ready to print."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid ""
+"This is a Cura project file. Would you like to open it as a project or "
+"import the models from it?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
 msgctxt "@action:button"
-msgid "Marketplace"
+msgid "Open as project"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
 msgctxt "@title:window"
-msgid "New project"
+msgid "Open file(s)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
 msgid ""
-"Are you sure you want to start a new project? This will clear the build "
-"plate and any unsaved settings."
+"We have found one or more project file(s) within the files you have "
+"selected. You can open only one project file at a time. We suggest to only "
+"import models from those files. Would you like to proceed?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+msgctxt "@title:window The argument is the application name."
+msgid "About %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
-msgctxt "@button"
-msgid "Processing"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+msgctxt "@label"
+msgid "version: %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
-msgctxt "@button"
-msgid "Slice"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+msgctxt "@label"
+msgid "End-to-end solution for fused filament 3D printing."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+msgctxt "@info:credit"
+msgid ""
+"Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
+"Cura proudly uses the following open source projects:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
-msgid "Start the slicing process"
+msgid "Graphical user interface"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+msgctxt "@label"
+msgid "Application framework"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
-msgid "Time estimation"
+msgid "G-code generator"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
-msgid "Material estimation"
+msgid "Interprocess communication library"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
+msgctxt "@label"
+msgid "Programming language"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+msgctxt "@label"
+msgid "GUI framework"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
-msgid "No time estimation available"
+msgid "GUI framework bindings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
-msgid "No cost estimation available"
+msgid "C/C++ Binding library"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+msgctxt "@label"
+msgid "Data interchange format"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
-msgid "Add a printer"
+msgid "Support library for scientific computing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
-msgid "Add a networked printer"
+msgid "Support library for faster math"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
-msgid "Add a non-networked printer"
+msgid "Support library for handling STL files"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
-msgid "Add a Cloud printer"
+msgid "Support library for handling triangular meshes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
-msgid "Waiting for Cloud response"
+msgid "Support library for handling 3MF files"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
-msgid "No printers found in your account?"
+msgid "Support library for file metadata and streaming"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
+msgid "Serial communication library"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+msgctxt "@label"
+msgid "ZeroConf discovery library"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
-msgid "Add printer by IP address"
+msgid "Polygon clipping library"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+msgctxt "@Label"
+msgid "Static type checker for Python"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+msgctxt "@Label"
+msgid "Root Certificates for validating SSL trustworthiness"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+msgctxt "@Label"
+msgid "Python Error tracking library"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
-msgid "The printer at this address has not responded yet."
+msgid "Polygon packing library, developed by Prusa Research"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
-msgid ""
-"This printer cannot be added because it's an unknown printer or it's not the "
-"host of a group."
+msgid "Python bindings for libnest2d"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
-msgctxt "@button"
-msgid "Back"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+msgctxt "@label"
+msgid "Support library for system keyring access"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
-msgctxt "@button"
-msgid "Connect"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
-msgid "User Agreement"
+msgid "Font"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+msgctxt "@label"
+msgid "SVG icons"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
+msgid "Linux cross-distribution application deployment"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
+msgctxt "@title:window"
+msgid "Discard or Keep changes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
+msgctxt "@text:window, %1 is a profile name"
 msgid ""
-"Please follow these steps to set up Ultimaker Cura. This will only take a "
-"few moments."
+"You have customized some profile settings. Would you like to Keep these "
+"changed settings after switching profiles? Alternatively, you can discard "
+"the changes to load the defaults from '%1'."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
-msgctxt "@button"
-msgid "Get started"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
+msgctxt "@title:column"
+msgid "Profile settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
+msgctxt "@title:column"
+msgid "Current changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
-msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
-msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
-msgctxt "@button"
-msgid "Skip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
+msgctxt "@action:button"
+msgid "Discard changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
-msgctxt "@text"
-msgid "Create a free Ultimaker Account"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
+msgctxt "@action:button"
+msgid "Keep changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
 msgctxt "@label"
-msgid "Manufacturer"
+msgid "No items to select from"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
-msgctxt "@label"
-msgid "Profile author"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
-msgctxt "@label"
-msgid "Printer name"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
-msgctxt "@label"
-msgid "Refresh"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
-msgctxt "@label"
-msgid "Add printer by IP"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
-msgctxt "@label"
-msgid "Troubleshooting"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
-msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid ""
-"Ultimaker Cura collects anonymous data to improve print quality and user "
-"experience, including:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid ""
-"Data collected by Ultimaker Cura will not contain any personal information."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
-msgctxt "@label"
-msgid "What's New"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
-msgctxt "@label"
-msgid "Release Notes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
-msgctxt "@title:window The argument is the application name."
-msgid "About %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
-msgctxt "@label"
-msgid "version: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
-msgctxt "@label"
-msgid "End-to-end solution for fused filament 3D printing."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
-msgctxt "@info:credit"
-msgid ""
-"Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
-"Cura proudly uses the following open source projects:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
-msgctxt "@label"
-msgid "Graphical user interface"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Application framework"
+msgid "Loading available configurations from the printer..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "G-code generator"
+msgid ""
+"The configurations are not available because the printer is disconnected."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Interprocess communication library"
+msgid ""
+"This configuration is not available because %1 is not recognized. Please "
+"visit %2 to download the correct material profile."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Programming language"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
-msgctxt "@label"
-msgid "GUI framework"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid ""
+"The configuration of this extruder is not allowed, and prohibits slicing."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
-msgctxt "@label"
-msgid "GUI framework bindings"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
 msgctxt "@label"
-msgid "C/C++ Binding library"
+msgid "Select configuration"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
 msgctxt "@label"
-msgid "Data interchange format"
+msgid "Configurations"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
-msgctxt "@label"
-msgid "Support library for scientific computing"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
 msgctxt "@label"
-msgid "Support library for faster math"
+msgid "Printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Support library for handling STL files"
+msgid "Enabled"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Support library for handling planar objects"
+msgid "Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Support library for handling triangular meshes"
+msgid "Use glue for better adhesion with this material combination."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
 msgctxt "@label"
-msgid "Support library for handling 3MF files"
-msgstr ""
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Support library for file metadata and streaming"
+msgid "Number of Copies"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
-msgctxt "@label"
-msgid "Serial communication library"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
-msgctxt "@label"
-msgid "ZeroConf discovery library"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
-msgctxt "@label"
-msgid "Polygon clipping library"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
-msgctxt "@Label"
-msgid "Static type checker for Python"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
-msgctxt "@Label"
-msgid "Root Certificates for validating SSL trustworthiness"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
-msgctxt "@Label"
-msgid "Python Error tracking library"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
 msgctxt "@label"
-msgid "Polygon packing library, developed by Prusa Research"
+msgid "View type"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
 msgctxt "@label"
-msgid "Python bindings for libnest2d"
+msgid "Sign in to the Ultimaker platform"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
-msgctxt "@label"
-msgid "Support library for system keyring access"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
-msgctxt "@label"
-msgid "Python extensions for Microsoft Windows"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
-msgctxt "@label"
-msgid "Font"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
-msgctxt "@label"
-msgid "SVG icons"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
-msgctxt "@label"
-msgid "Linux cross-distribution application deployment"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
+msgctxt "@button"
+msgid "Ultimaker Account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
+msgctxt "@button"
+msgid "Sign Out"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid ""
-"We have found one or more project file(s) within the files you have "
-"selected. You can open only one project file at a time. We suggest to only "
-"import models from those files. Would you like to proceed?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
-msgctxt "@title:column"
-msgid "Profile settings"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
-msgctxt "@title:column"
-msgid "Current changes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
-msgctxt "@action:button"
-msgid "Discard changes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
-msgctxt "@action:button"
-msgid "Keep changes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid ""
-"This is a Cura project file. Would you like to open it as a project or "
-"import the models from it?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid ""
-"The cloud printer is offline. Please check if the printer is turned on and "
-"connected to the internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid ""
-"This printer is not linked to your account. Please visit the Ultimaker "
-"Digital Factory to establish a connection."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
 msgid ""
-"The cloud connection is currently unavailable. Please sign in to connect to "
-"the cloud printer."
+"We have found one or more G-Code files within the files you have selected. "
+"You can only open one G-Code file at a time. If you want to open a G-Code "
+"file, please just select only one."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid ""
-"The cloud connection is currently unavailable. Please check your internet "
-"connection."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
-msgid "Preset printers"
+msgid "Experimental"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
 msgctxt "@label"
 msgid "Print settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
 msgctxt "@label shown when we load a Gcode file"
 msgid "Print setup disabled. G-code file can not be modified."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the "
-"profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
 msgctxt "@button"
 msgid "Recommended"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
 msgctxt "@button"
 msgid "Custom"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
-msgctxt "@label"
-msgid "Experimental"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt ""
 "@label %1 is filled in with the type of a profile. %2 is filled with a list "
 "of numbers (eg '1' or '1, 2')"
@@ -4293,691 +4416,871 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
+msgid "Gradual infill"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
 msgid ""
-"You have modified some profile settings. If you want to change these go to "
-"custom mode."
+"Gradual infill will gradually increase the amount of infill towards the top."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid ""
 "Generate structures to support parts of the model which have overhangs. "
 "Without these structures, such parts would collapse during printing."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
+msgid "Profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
 msgid ""
-"Gradual infill will gradually increase the amount of infill towards the top."
+"You have modified some profile settings. If you want to change these go to "
+"custom mode."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid ""
 "Enable printing a brim or raft. This will add a flat area around or under "
 "your object which is easy to cut off afterwards."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the "
+"profile.\n"
+"\n"
+"Click to open the profile manager."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
+msgid "Rename"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid ""
+"This setting has been hidden by the active machine and will not be visible."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid ""
+"This setting has been hidden by the value of %1. Change the value of that "
+"setting to make this setting visible."
+msgid_plural ""
+"This setting has been hidden by the values of %1. Change the values of those "
+"settings to make this setting visible."
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid ""
+"The new filament diameter is set to %1 mm, which is not compatible with the "
+"current extruder. Do you wish to continue?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Number of Copies"
+msgid "Display Name"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
+msgctxt "@label"
+msgid "Brand"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
+msgctxt "@label"
+msgid "Material Type"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
+msgctxt "@label"
+msgid "Color"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Printer"
+msgid "Density"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Enabled"
+msgid "Diameter"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Material"
+msgid "Filament Cost"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
+msgid "Filament weight"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid ""
-"The configuration of this extruder is not allowed, and prohibits slicing."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
+msgctxt "@label"
+msgid "Filament length"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
+msgctxt "@label"
+msgid "Cost per Meter"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
 msgctxt "@label"
-msgid "Select configuration"
+msgid "This material is linked to %1 and shares some of its properties."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
 msgctxt "@label"
-msgid "Configurations"
+msgid "Unlink Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
+msgid "Description"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
 msgctxt "@label"
+msgid "Adhesion Information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
 msgid ""
-"The configurations are not available because the printer is disconnected."
+"Following a few simple steps, you will be able to synchronize all your "
+"material profiles with your printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
-msgctxt "@label"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
 msgid ""
-"This configuration is not available because %1 is not recognized. Please "
-"visit %2 to download the correct material profile."
+"To automatically sync the material profiles with all your printers connected "
+"to Digital Factory you need to be signed in in Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
-msgctxt "@label"
-msgid "Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid ""
+"Make sure all your printers are turned ON and connected to Digital Factory."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid ""
+"It seems like you don't have any compatible printers connected to Digital "
+"Factory. Make sure your printer is connected and it's running the latest "
+"firmware."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt ""
+"@text In the UI this is followed by a list of steps the user needs to take."
+msgid ""
+"Follow the following steps to load the new material profiles to your printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid ""
+"Insert the USB stick into your printer and launch the procedure to load new "
+"material profiles."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
+msgid "Materials compatible with active printer:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
+msgid "Create new"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
+msgid "Sync with Printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
+msgid "Import Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid ""
+"Could not import material <filename>%1</filename>: <message>%2</message>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
+msgid "Export Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid ""
+"Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid ""
 "This profile uses the defaults specified by the printer, so it has no "
 "settings/overrides in the list below."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
-msgctxt "@label"
-msgid "Currency:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
-msgid "Theme:"
+msgid "Currency:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid ""
-"You will need to restart the application for these changes to have effect."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt ""
+"@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid ""
+"*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid ""
 "Highlight unsupported areas of the model in red. Without support these areas "
 "will not print properly."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid ""
 "Highlight missing or extraneous surfaces of the model using warning signs. "
 "The toolpaths will often be missing parts of the intended geometry."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid ""
 "Moves the camera so the model is in the center of the view when a model is "
 "selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid ""
 "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid ""
 "Should models on the platform be moved so that they no longer intersect?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid ""
 "Should opening files from the desktop or external applications open in the "
 "same instance of Cura?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid ""
 "Should the build plate be cleared before loading a new model in the single "
 "instance of Cura?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid ""
 "An model may appear extremely small if its unit is for example in meters "
 "rather than millimeters. Should these models be scaled up?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid ""
 "Should a prefix based on the printer name be added to the print job name "
 "automatically?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid ""
 "When you have made changes to a profile and switched to a different one, a "
@@ -4985,29 +5288,29 @@ msgid ""
 "not, or you can choose a default behaviour and never show that dialog again."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid ""
 "Default behavior for changed setting values when switching to a different "
 "profile: "
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid ""
 "Should anonymous data about your print be sent to Ultimaker? Note, no "
@@ -5015,1172 +5318,869 @@ msgid ""
 "stored."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid ""
 "Should an automatic check for new plugins be done every time Cura is "
 "started? It is highly recommended that you do not disable this!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid ""
-"The new filament diameter is set to %1 mm, which is not compatible with the "
-"current extruder. Do you wish to continue?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
+msgid "Could not connect to device."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
+msgid "Can't connect to your Ultimaker printer?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
+msgid "The printer at this address has not responded yet."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
+msgid ""
+"This printer cannot be added because it's an unknown printer or it's not the "
+"host of a group."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
+msgid "Release Notes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
+msgid "User Agreement"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
+msgid "What's New"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
-msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Unlink Material"
+msgid "Add a Cloud printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Description"
+msgid "Waiting for Cloud response"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Adhesion Information"
+msgid "No printers found in your account?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Could not import material <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
 msgid ""
-"Failed to export material to <filename>%1</filename>: <message>%2</message>"
+"Please follow these steps to set up Ultimaker Cura. This will only take a "
+"few moments."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid ""
-"Following a few simple steps, you will be able to synchronize all your "
-"material profiles with your printers."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid ""
-"To automatically sync the material profiles with all your printers connected "
-"to Digital Factory you need to be signed in in Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
 msgid ""
-"Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
+"Ultimaker Cura collects anonymous data to improve print quality and user "
+"experience, including:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
 msgctxt "@text"
 msgid ""
-"It seems like you don't have any compatible printers connected to Digital "
-"Factory. Make sure your printer is connected and it's running the latest "
-"firmware."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
+"Data collected by Ultimaker Cura will not contain any personal information."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt ""
-"@text In the UI this is followed by a list of steps the user needs to take."
-msgid ""
-"Follow the following steps to load the new material profiles to your printer."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid ""
-"Insert the USB stick into your printer and launch the procedure to load new "
-"material profiles."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid ""
+"The cloud printer is offline. Please check if the printer is turned on and "
+"connected to the internet."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid ""
+"This printer is not linked to your account. Please visit the Ultimaker "
+"Digital Factory to establish a connection."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid ""
+"The cloud connection is currently unavailable. Please sign in to connect to "
+"the cloud printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid ""
+"The cloud connection is currently unavailable. Please check your internet "
+"connection."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated "
+"value.\n"
+"\n"
+"Click to make these settings visible."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Printer control"
+msgid ""
+"This setting is not used because all the settings that it influences are "
+"overridden."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
-msgctxt "@label"
-msgid "Jog Position"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Z"
+msgid ""
+"This setting is always shared between all extruders. Changing it here will "
+"change the value for all extruders."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Jog Distance"
+msgid "This setting is resolved from conflicting extruder-specific values:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Send G-code"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
 msgid ""
-"Send a custom G-code command to the connected printer. Press 'enter' to send "
-"the command."
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Extruder"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
 msgid ""
-"The target temperature of the hotend. The hotend will heat up or cool down "
-"towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid ""
-"Heat the hotend in advance before printing. You can continue adjusting your "
-"print while it is heating, and you won't have to wait for the hotend to heat "
-"up when you're ready to print."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
+"This setting is normally calculated, but it currently has an absolute value "
+"set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Build plate"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid ""
-"The target temperature of the heated bed. The bed will heat up or cool down "
-"towards this temperature. If this is 0, the bed heating is turned off."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
+msgid "Hex"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid ""
-"Heat the bed in advance before printing. You can continue adjusting your "
-"print while it is heating, and you won't have to wait for the bed to heat up "
-"when you're ready to print."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
-msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Checking..."
+msgid "Active print"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Account synced"
+msgid "Job Name"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
+msgid "Printing Time"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
+msgid "Estimated time left"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
+msgid "Show Online Troubleshooting"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt ""
+"@action:inmenu Marketplace is a brand name of Ultimaker's, so don't "
+"translate."
 msgid "Add more materials from Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid ""
-"This setting is not used because all the settings that it influences are "
-"overridden."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid ""
-"This setting is always shared between all extruders. Changing it here will "
-"change the value for all extruders."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value "
-"set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated "
-"value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid ""
-"We have found one or more G-Code files within the files you have selected. "
-"You can only open one G-Code file at a time. If you want to open a G-Code "
-"file, please just select only one."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
 msgstr ""
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
+msgid "Provides a prepare stage in Cura."
 msgstr ""
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
+msgid "Prepare Stage"
 msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
+msgid "Provides support for exporting Cura profiles."
 msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
+msgid "Cura Profile Writer"
 msgstr ""
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
+msgid "Provides support for reading model files."
 msgstr ""
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
+msgid "Trimesh Reader"
 msgstr ""
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
+msgid "Checks for firmware updates."
 msgstr ""
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
+msgid "Firmware Update Checker"
 msgstr ""
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid ""
-"Provides a way to change machine settings (such as build volume, nozzle "
-"size, etc.)."
+msgid "Logs certain events so that they can be used by the crash reporter"
 msgstr ""
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
+msgid "Sentry Logger"
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid ""
-"Creates an eraser mesh to block the printing of support in certain places"
+msgid "Provides a monitor stage in Cura."
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
+msgid "Monitor Stage"
 msgstr ""
 
 #: RemovableDriveOutputDevice/plugin.json
@@ -6193,104 +6193,108 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
+msgid "Provides support for reading AMF files."
 msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
+msgid "AMF Reader"
 msgstr ""
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
+msgid "Provides support for reading Ultimaker Format Packages."
 msgstr ""
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
+msgid "UFP Reader"
 msgstr ""
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
+msgid ""
+"Connects to the Digital Library, allowing Cura to open files from and save "
+"files to the Digital Library."
 msgstr ""
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
+msgid "Ultimaker Digital Library"
 msgstr ""
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
+msgid "Provides the Per Model Settings."
 msgstr ""
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
+msgid "Per Model Settings Tool"
 msgstr ""
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
+msgid "Provides a machine actions for updating firmware."
 msgstr ""
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
+msgid "Firmware Updater"
 msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
+msgid "Manages network connections to Ultimaker networked printers."
 msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
+msgid "Ultimaker Network Connection"
 msgstr ""
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
+msgid ""
+"Checks models and print configuration for possible printing issues and give "
+"suggestions."
 msgstr ""
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
+msgid "Model Checker"
 msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
+msgid "Provides the preview of sliced layerdata."
 msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
+msgid "Simulation View"
 msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
+msgid "Writes g-code to a file."
 msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
+msgid "G-code Writer"
 msgstr ""
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
+msgid "Provides support for writing 3MF files."
 msgstr ""
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
+msgid "3MF Writer"
 msgstr ""
 
 #: GCodeGzReader/plugin.json
@@ -6303,179 +6307,174 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr ""
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
+msgid "Provides capabilities to read and write XML-based material profiles."
 msgstr ""
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
+msgid "Material Profiles"
 msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
+msgid "Provides the link to the CuraEngine slicing backend."
 msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
+msgid "CuraEngine Backend"
 msgstr ""
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid ""
-"Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgid "Provides support for reading X3D files."
 msgstr ""
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
+msgid "X3D Reader"
 msgstr ""
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
 msgstr ""
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
+msgid "Image Reader"
 msgstr ""
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
+msgid "Provides support for reading 3MF files."
 msgstr ""
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
+msgid "3MF Reader"
 msgstr ""
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
+msgid "Provides support for writing Ultimaker Format Packages."
 msgstr ""
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
+msgid "UFP Writer"
 msgstr ""
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid ""
-"Provides machine actions for Ultimaker machines (such as bed leveling "
-"wizard, selecting upgrades, etc.)."
+msgid "Provides support for importing profiles from legacy Cura versions."
 msgstr ""
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
+msgid "Legacy Cura Profile Reader"
 msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
 msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
+msgid "Version Upgrade 4.3 to 4.4"
 msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
 msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
+msgid "Version Upgrade 2.1 to 2.2"
 msgstr ""
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
 msgstr ""
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
+msgid "Version Upgrade 4.1 to 4.2"
 msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
 msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
+msgid "Version Upgrade 4.13 to 5.0"
 msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid ""
-"Connects to the Digital Library, allowing Cura to open files from and save "
-"files to the Digital Library."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
 msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
+msgid "Version Upgrade 4.5 to 4.6"
 msgstr ""
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
 msgstr ""
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
+msgid "Version Upgrade 3.3 to 3.4"
 msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
 msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
+msgid "Version Upgrade 4.8 to 4.9"
 msgstr ""
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
 msgstr ""
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
+msgid "Version Upgrade 2.7 to 3.0"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
 msgstr ""
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
@@ -6488,114 +6487,114 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
 msgstr ""
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
@@ -6608,104 +6607,119 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgid "Backup and restore your configuration."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
+msgid "Cura Backups"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgid "Provides support for importing Cura profiles."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
+msgid "Cura Profile Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
+msgid "Slice info"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
+msgid "G-code Profile Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgid "Writes g-code to a compressed archive."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
+msgid "Compressed G-code Writer"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
+msgid "Post Processing"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgid ""
+"Creates an eraser mesh to block the printing of support in certain places"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
+msgid "Support Eraser"
 msgstr ""
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
+msgid "Provides a preview stage in Cura."
 msgstr ""
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
+msgid "Preview Stage"
 msgstr ""
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
+msgid "Provides the X-Ray view."
 msgstr ""
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
+msgid "X-Ray View"
 msgstr ""
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
+msgid ""
+"Provides machine actions for Ultimaker machines (such as bed leveling "
+"wizard, selecting upgrades, etc.)."
 msgstr ""
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
+msgid "Ultimaker machine actions"
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid ""
+"Manages extensions to the application and allows browsing extensions from "
+"the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
 msgstr ""
 
 #: SolidView/plugin.json
@@ -6718,34 +6732,35 @@ msgctxt "name"
 msgid "Solid View"
 msgstr ""
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
+msgid "Allows loading and displaying G-code files."
 msgstr ""
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
+msgid "G-code Reader"
 msgstr ""
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
+msgid ""
+"Provides a way to change machine settings (such as build volume, nozzle "
+"size, etc.)."
 msgstr ""
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
+msgid "Machine Settings Action"
 msgstr ""
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
 msgid ""
-"Checks models and print configuration for possible printing issues and give "
-"suggestions."
+"Accepts G-Code and sends them to a printer. Plugin can also update firmware."
 msgstr ""
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
+msgid "USB printing"
 msgstr ""
diff --git a/resources/i18n/de_DE/cura.po b/resources/i18n/de_DE/cura.po
index 6a711a67bb..a8bb583a13 100644
--- a/resources/i18n/de_DE/cura.po
+++ b/resources/i18n/de_DE/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2022-01-10 11:42+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: German <info@lionbridge.com>, German <info@bothof.nl>\n"
@@ -17,1428 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.3\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Konnte kein Archiv von Benutzer-Datenverzeichnis {} erstellen"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122 /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Backup"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Versucht, ein Cura-Backup-Verzeichnis ohne entsprechende Daten oder Metadaten wiederherzustellen."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Versucht, ein Cura-Backup wiederherzustellen, das eine höhere Version als die aktuelle hat."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "Beim Versuch, ein Backup von Cura wiederherzustellen, trat der folgende Fehler auf:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Bitte stimmen Sie die Materialprofile auf Ihre Drucker ab („synchronisieren“), bevor Sie mit dem Drucken beginnen."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Neue Materialien installiert"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Materialien synchronisieren"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "Mehr erfahren"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "Materialarchiv konnte nicht in {} gespeichert werden:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Speichern des Materialarchivs fehlgeschlagen"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Unbekannter Fehler."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Die Höhe der Druckabmessung wurde aufgrund des Wertes der Einstellung „Druckreihenfolge“ reduziert, um eine Kollision der Brücke mit den gedruckten Modellen zu verhindern."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Produktabmessungen"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Möchten Sie {0} wirklich entfernen? Der Vorgang kann nicht rückgängig gemacht werden!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nicht überschrieben"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Unbekannt"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Der/die nachfolgende(n) Drucker kann/können nicht verbunden werden, weil er/sie Teil einer Gruppe ist/sind"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Verfügbare vernetzte Drucker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Vorbereiten"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura-Profil"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Benutzerdefinierte Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Öffnen Sie das komprimierte Dreiecksnetz"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Alle unterstützten Typen ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Alle Dateien (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visuell"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Das visuelle Profil wurde für den Druck visueller Prototypen und Modellen entwickelt, bei denen das Ziel eine hohe visuelle Qualität und eine hohe Oberflächenqualität ist."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Das Engineering-Profil ist für den Druck von Funktionsprototypen und Endnutzungsteilen gedacht, bei denen Präzision gefragt ist und engere Toleranzen gelten."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Entwurf"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Das Entwurfsprofil wurde für erste Prototypen und die Konzeptvalidierung entwickelt, um einen deutlich schnelleren Druck zu ermöglichen."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Benutzerdefiniertes Material"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289 /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Benutzerdefiniert"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Login fehlgeschlagen"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Neue Position für Objekte finden"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Position finden"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Innerhalb der Druckabmessung für alle Objekte konnte keine Position gefunden werden"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Kann Position nicht finden"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Die Erstellung eines Materialarchivs zur Synchronisierung mit Druckern ist fehlgeschlagen."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Das Archiv der Materialien konnte nicht geladen werden, um es mit Druckern zu synchronisieren."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "Die Antwort von Digital Factory scheint beschädigt zu sein."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "In der Antwort von Digital Factory fehlen wichtige Informationen."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Die Verbindung mit Digital Factory zum Synchronisieren von Materialien mit einigen Druckern ist fehlgeschlagen."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Es konnte keine Verbindung zu Digital Factory hergestellt werden."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Geräte werden geladen..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Erstellungen werden eingerichtet ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Aktives Gerät wird initialisiert ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Gerätemanager wird initialisiert ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Bauraum wird initialisiert ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Die Szene wird eingerichtet..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Die Benutzeroberfläche wird geladen..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Funktion wird initialisiert ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Es kann nur jeweils ein G-Code gleichzeitig geladen werden. Wichtige {0} werden übersprungen."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809 /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Warnhinweis"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Wenn G-Code geladen wird, kann keine weitere Datei geöffnet werden. Wichtige {0} werden übersprungen."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Fehler"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Überspringen"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72 /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Schließen"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Weiter"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290 /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Beenden"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Hinzufügen"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Abbrechen"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Gruppe #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Außenwand"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Innenwände"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Außenhaut"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Füllung"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Stützstruktur-Füllung"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Stützstruktur-Schnittstelle"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Stützstruktur"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Skirt"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Einzugsturm"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Bewegungen"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Einzüge"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Sonstige"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37 /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "Die Versionshinweise konnten nicht geöffnet werden."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura kann nicht starten"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>Hoppla, bei Ultimaker Cura ist ein Problem aufgetreten.</p></b>\n"
-"                    <p>Beim Start ist ein nicht behebbarer Fehler aufgetreten. Er wurde möglicherweise durch einige falsche Konfigurationsdateien verursacht. Wir empfehlen ein Backup und Reset Ihrer Konfiguration.</p>\n"
-"                    <p>Backups sind im Konfigurationsordner abgelegt.</p>\n"
-"                    <p>Senden Sie uns diesen Absturzbericht bitte, um das Problem zu beheben.</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Absturzbericht an Ultimaker senden"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Detaillierten Absturzbericht anzeigen"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Konfigurationsordner anzeigen"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Backup und Reset der Konfiguration"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Crash-Bericht"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Ein schwerer Fehler ist in Cura aufgetreten. Senden Sie uns diesen Absturzbericht, um das Problem zu beheben</p></b>\n"
-"            <p>Verwenden Sie bitte die Schaltfläche „Bericht senden“, um den Fehlerbericht automatisch an unsere Server zu senden</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Systeminformationen"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Unbekannt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Cura-Version"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Cura-Sprache"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "Sprache des Betriebssystems"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Plattform"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qt Version"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQt Version"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Noch nicht initialisiert<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGL-Version: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL-Anbieter: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL-Renderer: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Fehler-Rückverfolgung"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Protokolle"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Bericht senden"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Es kann kein neuer Anmeldevorgang gestartet werden. Bitte überprüfen Sie, ob noch ein weiterer Anmeldevorgang aktiv ist."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Der Ultimaker-Konto-Server konnte nicht erreicht werden."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "Anmeldung fehlgeschlagen"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "Angegebener Status ist falsch."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Zeitüberschreitung bei der Authentifizierung mit dem Kontoserver."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Erteilen Sie bitte die erforderlichen Freigaben bei der Autorisierung dieser Anwendung."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Bei dem Versuch, sich anzumelden, trat ein unerwarteter Fehler auf. Bitte erneut versuchen."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Antwort konnte nicht gelesen werden."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Objekte vervielfältigen und platzieren"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Objekte platzieren"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Objekt-Platzierung"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Nicht unterstützt"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Düse"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Die Einstellungen wurden an die aktuell verfügbaren Extruder angepasst:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Einstellungen aktualisiert"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder deaktiviert"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Datei bereits vorhanden"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Die Datei <filename>{0}</filename> ist bereits vorhanden. Soll die Datei wirklich überschrieben werden?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459 /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "Ungültige Datei-URL:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Export des Profils nach <filename>{0}</filename> fehlgeschlagen: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Export des Profils nach <filename>{0}</filename> fehlgeschlagen: Fehlermeldung von Writer-Plugin."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Profil wurde nach <filename>{0}</filename> exportiert"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Export erfolgreich ausgeführt"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Import des Profils aus Datei <filename>{0}</filename>: {1} fehlgeschlagen"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Import des Profils aus Datei <filename>{0}</filename> kann erst durchgeführt werden, wenn ein Drucker hinzugefügt wurde."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Kein benutzerdefiniertes Profil für das Importieren in Datei <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Import des Profils aus Datei <filename>{0}</filename> fehlgeschlagen:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Dieses Profil <filename>{0}</filename> enthält falsche Daten, Importieren nicht möglich."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Import des Profils aus Datei <filename>{0}</filename> fehlgeschlagen:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "Profil {0} erfolgreich importiert."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "Datei {0} enthält kein gültiges Profil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Profil {0} hat einen unbekannten Dateityp oder ist beschädigt."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Benutzerdefiniertes Profil"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Für das Profil fehlt eine Qualitätsangabe."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Es ist noch kein Drucker aktiv."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "Das Profil kann nicht hinzugefügt werden."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "Der Qualitätstyp „{0}“ ist nicht mit der aktuell aktiven Maschinendefinition „{1}“ kompatibel."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Warnung: Das Profil wird nicht angezeigt, weil sein Qualitätstyp „{0}“ für die aktuelle Konfiguration nicht verfügbar ist. Wechseln Sie zu einer Material-/Düsenkombination, die mit diesem Qualitätstyp kompatibel ist."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Einstellungen pro Objekt"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Pro Objekteinstellungen konfigurieren"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura-Profil"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D-Datei"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Beim Versuch, Ihr Backup wiederherzustellen, trat ein Fehler auf."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Backups"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Beim Versuch, Ihr Backup hochzuladen, trat ein Fehler auf."
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Ihr Backup wird erstellt..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Beim Erstellen Ihres Backups ist ein Fehler aufgetreten."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Zugriff auf Update-Informationen nicht möglich."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Ihr Backup wird hochgeladen..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Es können neue Funktionen oder Bug-Fixes für Ihren {machine_name} verfügbar sein! Falls noch nicht geschehen, wird empfohlen, die Firmware auf Ihrem Drucker auf Version {latest_version} zu aktualisieren."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Ihr Backup wurde erfolgreich hochgeladen."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "Neue %s-stabile Firmware verfügbar"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Das Backup überschreitet die maximale Dateigröße."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Anleitung für die Aktualisierung"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Backups verwalten"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Geräteeinstellungen"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Stützstruktur-Blocker"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Erstellt ein Volumen, in dem keine Stützstrukturen gedruckt werden."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Wechseldatenträger"
+msgid "Monitor"
+msgstr "Überwachen"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Speichern auf Wechseldatenträger"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Auf Wechseldatenträger speichern {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Es sind keine Dateiformate zum Schreiben vorhanden!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Wird auf Wechseldatenträger gespeichert <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Wird gespeichert"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Konnte nicht als <filename>{0}</filename> gespeichert werden: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Bei dem Versuch, auf {device} zu schreiben, wurde ein Dateiname nicht gefunden."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Konnte nicht auf dem Wechseldatenträger gespeichert werden {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Fehler"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Auf Wechseldatenträger {0} gespeichert als {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Datei wurde gespeichert"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Auswerfen"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Wechseldatenträger auswerfen {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Ausgeworfen {0}. Sie können den Datenträger jetzt sicher entfernen."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Hardware sicher entfernen"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Auswurf fehlgeschlagen {0}. Möglicherweise wird das Laufwerk von einem anderen Programm verwendet."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Firmware aktualisieren"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04-Profile"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Empfohlen"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Benutzerdefiniert"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Projektdatei <filename>{0}</filename> enthält einen unbekannten Maschinentyp <message>{1}</message>. Importieren der Maschine ist nicht möglich. Stattdessen werden die Modelle importiert."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Projektdatei öffnen"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Auf Projektdatei <filename>{0}</filename> kann plötzlich nicht mehr zugegriffen werden: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Projektdatei kann nicht geöffnet werden"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "Projektdatei <filename>{0}</filename> ist beschädigt: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Projektdatei <filename>{0}</filename> verwendet Profile, die nicht mit dieser Ultimaker Cura-Version kompatibel sind."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27 /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF-Datei"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Kann nicht in UFP-Datei schreiben:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28 /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Format Package"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-Code-Datei"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Vorschau"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgen-Ansicht"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Schichten werden verarbeitet"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "Informationen"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "Fehler beim Slicing mit einem unerwarteten Fehler. Bitte denken Sie daran, Fehler in unserem Issue Tracker zu melden."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "Slicing fehlgeschlagen"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Einen Fehler melden"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Einen Fehler im Issue Tracker von Ultimaker Cura melden."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Slicing mit dem aktuellen Material nicht möglich, da es mit der gewählten Maschine oder Konfiguration nicht kompatibel ist."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Slicing nicht möglich"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Die aktuellen Einstellungen lassen kein Schneiden (Slicing) zu. Die folgenden Einstellungen sind fehlerhaft:{0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Aufgrund der Pro-Modell-Einstellungen ist kein Schneiden (Slicing) möglich. Die folgenden Einstellungen sind für ein oder mehrere Modelle fehlerhaft: {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Schneiden (Slicing) ist nicht möglich, da der Einzugsturm oder die Einzugsposition(en) ungültig ist (sind)."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Schneiden (Slicing) ist nicht möglich, da Objekte vorhanden sind, die mit dem deaktivierten Extruder %s verbunden sind."
+msgid "Warning"
+msgstr "Warnhinweis"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Bitte überprüfen Sie die Einstellungen und prüfen Sie, ob Ihre Modelle:\n"
-"- Mit der Druckraumgröße kompatibel sind\n"
-"- Einem aktiven Extruder zugewiesen sind\n"
-"- Nicht alle als Modifier Meshes eingerichtet sind"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Wechseldatenträger"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "AMF-Datei"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17 /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Komprimierte G-Code-Datei"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Nachbearbeitung"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-Code ändern"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB-Drucken"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Über USB drucken"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Über USB drucken"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Über USB verbunden"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Format Package"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Ein USB-Druck wird ausgeführt. Das Schließen von Cura beendet diesen Druck. Sind Sie sicher?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Druck wird bearbeitet. Cura kann keinen weiteren Druck via USB starten, bis der vorherige Druck abgeschlossen wurde."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Druck in Bearbeitung"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Vorbereiten"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-Code parsen"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-Code-Details"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Stellen Sie sicher, dass der G-Code für Ihren Drucker und Ihre Druckerkonfiguration geeignet ist, bevor Sie die Datei senden. Der Darstellung des G-Codes ist möglicherweise nicht korrekt."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G-Datei"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG-Bilddatei"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG-Bilddatei"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG-Bilddatei"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP-Bilddatei"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF-Bilddatei"
+msgid "Per Model Settings"
+msgstr "Einstellungen pro Objekt"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Druckbett nivellieren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Pro Objekteinstellungen konfigurieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Upgrades wählen"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeWriter unterstützt keinen Textmodus."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Zugriff auf Update-Informationen nicht möglich."
+msgid "Update Firmware"
+msgstr "Firmware aktualisieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Es können neue Funktionen oder Bug-Fixes für Ihren {machine_name} verfügbar sein! Falls noch nicht geschehen, wird empfohlen, die Firmware auf Ihrem Drucker auf Version {latest_version} zu aktualisieren."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "Neue %s-stabile Firmware verfügbar"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Anleitung für die Aktualisierung"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "Die Datei mit den Beispieldaten kann nicht gelesen werden."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "Sie müssen das Programm beenden und neu starten {}, bevor Änderungen wirksam werden."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchronisierung läuft ..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95 /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Von Ihrem Ultimaker-Konto erkannte Änderungen"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Möchten Sie Material- und Softwarepakete mit Ihrem Konto synchronisieren?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchronisieren"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Ablehnen und vom Konto entfernen"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} Plugins konnten nicht heruntergeladen werden"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Ablehnen"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Stimme zu"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Plugin für Lizenzvereinbarung"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter unterstützt keinen Nicht-Textmodus."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Vor dem Exportieren bitte G-Code vorbereiten."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Cura zeigt die Schichten nicht präzise an, wenn „Drucken mit Drahtstruktur“ aktiviert ist."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura hat Materialprofile entdeckt, die auf dem Host-Drucker der Gruppe {0} noch nicht installiert wurden."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Simulationsansicht"
+msgid "Sending materials to printer"
+msgstr "Material an Drucker senden"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Es kann nichts angezeigt werden, weil Sie zuerst das Slicing vornehmen müssen."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Sie versuchen, sich mit {0} zu verbinden, aber dieser Drucker ist nicht der Host, der die Gruppe verwaltet. Besuchen Sie die Website, um den Drucker als Host der Gruppe zu konfigurieren."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Keine anzeigbaren Schichten vorhanden"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Diese Meldung nicht mehr anzeigen"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Schichtenansicht"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Drucken über Netzwerk"
+msgid "Not a group host"
+msgstr "Nicht Host-Drucker der Gruppe"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Drücken über Netzwerk"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Gruppe konfigurieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Über Netzwerk verbunden"
+msgid "Sending Print Job"
+msgstr "Druckauftrag senden"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "morgen"
+msgid "Uploading print job to printer."
+msgstr "Druckauftrag wird vorbereitet."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "heute"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "Die Druckauftragswarteschlange ist voll. Der Drucker kann keinen neuen Auftrag annehmen."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Anschluss über Netzwerk"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "Warteschlange voll"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Bitte warten Sie, bis der aktuelle Druckauftrag gesendet wurde."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Druckfehler"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Der Druckauftrag wurde erfolgreich an den Drucker gesendet."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Daten gesendet"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Sie versuchen, sich mit einem Drucker zu verbinden, auf dem Ultimaker Connect nicht läuft. Bitte aktualisieren Sie die Firmware des Druckers."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Drucker aktualisieren"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "Die Druckauftragswarteschlange ist voll. Der Drucker kann keinen neuen Auftrag annehmen."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "Warteschlange voll"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Druckauftrag senden"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Druckauftrag wird vorbereitet."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura hat Materialprofile entdeckt, die auf dem Host-Drucker der Gruppe {0} noch nicht installiert wurden."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Material an Drucker senden"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Daten konnten nicht in Drucker geladen werden."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Netzwerkfehler"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Sie versuchen, sich mit {0} zu verbinden, aber dieser Drucker ist nicht der Host, der die Gruppe verwaltet. Besuchen Sie die Website, um den Drucker als Host der Gruppe zu konfigurieren."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Nicht Host-Drucker der Gruppe"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Gruppe konfigurieren"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1448,66 +296,85 @@ msgstr ""
 "Ihr Drucker <b>{printer_name}</b> könnte über die Cloud verbunden sein.\n"
 " Verwalten Sie Ihre Druckwarteschlange und überwachen Sie Ihre Drucke von allen Orten aus, an denen Sie Ihren Drucker mit der Digital Factory verbinden"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "Sind Sie bereit für den Cloud-Druck?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Erste Schritte"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "Mehr erfahren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Über Cloud drucken"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Sie versuchen, sich mit einem Drucker zu verbinden, auf dem Ultimaker Connect nicht läuft. Bitte aktualisieren Sie die Firmware des Druckers."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Drucker aktualisieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Daten konnten nicht in Drucker geladen werden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Netzwerkfehler"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Drucken über Netzwerk"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Über Cloud drucken"
+msgid "Print over network"
+msgstr "Drücken über Netzwerk"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Über Cloud verbunden"
+msgid "Connected over the network"
+msgstr "Über Netzwerk verbunden"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Druck überwachen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "morgen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Verfolgen Sie den Druck in der Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "heute"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Unbekannter Fehlercode beim Upload des Druckauftrags: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Anschluss über Netzwerk"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Ihr Ultimaker-Konto hat einen neuen Drucker erkannt"
 msgstr[1] "Ihr Ultimaker-Konto hat neue Drucker erkannt"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Drucker {name} ({model}) aus Ihrem Konto wird hinzugefügt"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1515,70 +382,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... und {0} weiterer"
 msgstr[1] "... und {0} weitere"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Drucker aus Digital Factory hinzugefügt:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Für einen Drucker ist keine Cloud-Verbindung verfügbar"
 msgstr[1] "Für mehrere Drucker ist keine Cloud-Verbindung verfügbar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Dieser Drucker ist nicht mit der Digital Factory verbunden:"
 msgstr[1] "Diese Drucker sind nicht mit der Digital Factory verbunden:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Bitte besuchen Sie {website_link}, um eine Verbindung herzustellen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Druckerkonfigurationen speichern"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Drucker entfernen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} wird bis zur nächsten Synchronisierung entfernt."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Wenn Sie {printer_name} dauerhaft entfernen möchten, dann besuchen Sie bitte die {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Möchten Sie {printer_name} wirklich vorübergehend entfernen?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Drucker entfernen?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1594,2018 +462,3130 @@ msgstr[1] ""
 "Es werden gleich {0} Drucker aus Cura entfernt. Der Vorgang kann nicht rückgängig gemacht werden. \n"
 "Möchten Sie wirklich fortfahren?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr "Es werden gleich alle Drucker aus Cura entfernt. Dieser Vorgang kann nicht rückgängig gemacht werden.Möchten Sie wirklich fortfahren?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Öffnen Sie das komprimierte Dreiecksnetz"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Über Cloud drucken"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Über Cloud drucken"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Über Cloud verbunden"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Druck überwachen"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Verfolgen Sie den Druck in der Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Unbekannter Fehlercode beim Upload des Druckauftrags: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D-Modell-Assistent"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "Die hervorgehobenen Bereiche kennzeichnen fehlende oder überschüssige Oberflächen. Beheben Sie die Fehler am Modell und öffnen Sie es erneut in Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Ein oder mehrere 3D-Modelle können möglicherweise aufgrund der Modellgröße und Materialkonfiguration nicht optimal gedruckt werden:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Erfahren Sie, wie Sie die bestmögliche Druckqualität und Zuverlässigkeit sicherstellen.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Leitfaden zu Druckqualität anzeigen</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Cura zeigt die Schichten nicht präzise an, wenn „Drucken mit Drahtstruktur“ aktiviert ist."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Modellfehler"
+msgid "Simulation View"
+msgstr "Simulationsansicht"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Solide Ansicht"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Es kann nichts angezeigt werden, weil Sie zuerst das Slicing vornehmen müssen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Keine anzeigbaren Schichten vorhanden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Diese Meldung nicht mehr anzeigen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Schichtenansicht"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter unterstützt keinen Nicht-Textmodus."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Vor dem Exportieren bitte G-Code vorbereiten."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-Code-Datei"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Fehler beim Schreiben von 3MF-Datei."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "Das 3MF-Writer-Plugin ist beschädigt."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Es ist noch kein Workspace zum Speichern vorhanden. Bitte fügen Sie zuerst einen Drucker hinzu."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Keine Erlaubnis zum Beschreiben dieses Arbeitsbereichs."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "Das Betriebssystem erlaubt es nicht, eine Projektdatei an diesem Speicherort oder mit diesem Dateinamen zu speichern."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "3MF-Datei"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Cura-Projekt 3MF-Datei"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Überwachen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Komprimierte G-Code-Datei"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "Fehler beim Slicing mit einem unerwarteten Fehler. Bitte denken Sie daran, Fehler in unserem Issue Tracker zu melden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "Slicing fehlgeschlagen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Einen Fehler melden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Einen Fehler im Issue Tracker von Ultimaker Cura melden."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Slicing mit dem aktuellen Material nicht möglich, da es mit der gewählten Maschine oder Konfiguration nicht kompatibel ist."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D-Modell-Assistent"
+msgid "Unable to slice"
+msgstr "Slicing nicht möglich"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Die aktuellen Einstellungen lassen kein Schneiden (Slicing) zu. Die folgenden Einstellungen sind fehlerhaft:{0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Aufgrund der Pro-Modell-Einstellungen ist kein Schneiden (Slicing) möglich. Die folgenden Einstellungen sind für ein oder mehrere Modelle fehlerhaft: {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Schneiden (Slicing) ist nicht möglich, da der Einzugsturm oder die Einzugsposition(en) ungültig ist (sind)."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Schneiden (Slicing) ist nicht möglich, da Objekte vorhanden sind, die mit dem deaktivierten Extruder %s verbunden sind."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>Ein oder mehrere 3D-Modelle können möglicherweise aufgrund der Modellgröße und Materialkonfiguration nicht optimal gedruckt werden:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Erfahren Sie, wie Sie die bestmögliche Druckqualität und Zuverlässigkeit sicherstellen.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Leitfaden zu Druckqualität anzeigen</a></p>"
+"Bitte überprüfen Sie die Einstellungen und prüfen Sie, ob Ihre Modelle:\n"
+"- Mit der Druckraumgröße kompatibel sind\n"
+"- Einem aktiven Extruder zugewiesen sind\n"
+"- Nicht alle als Modifier Meshes eingerichtet sind"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Mesh-Typ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Schichten werden verarbeitet"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Normales Modell"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informationen"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Als Stützstruktur drucken"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D-Datei"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Einstellungen für Überlappungen ändern"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG-Bilddatei"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Überlappungen nicht unterstützen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG-Bilddatei"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Nur Mesh-Füllung"
+msgid "PNG Image"
+msgstr "PNG-Bilddatei"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Mesh beschneiden"
+msgid "BMP Image"
+msgstr "BMP-Bilddatei"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Einstellungen wählen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF-Bilddatei"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Einstellungen für die benutzerdefinierte Anpassung dieses Modells wählen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Düse"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtern..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Projektdatei <filename>{0}</filename> enthält einen unbekannten Maschinentyp <message>{1}</message>. Importieren der Maschine ist nicht möglich. Stattdessen werden die Modelle importiert."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Alle anzeigen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Projektdatei öffnen"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura-Backups"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Auf Projektdatei <filename>{0}</filename> kann plötzlich nicht mehr zugegriffen werden: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura-Version"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Projektdatei kann nicht geöffnet werden"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Maschinen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "Projektdatei <filename>{0}</filename> ist beschädigt: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materialien"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Projektdatei <filename>{0}</filename> verwendet Profile, die nicht mit dieser Ultimaker Cura-Version kompatibel sind."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Empfohlen"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Benutzerdefiniert"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Möchten Sie mehr?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "3MF-Datei"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Jetzt Backup durchführen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Kann nicht in UFP-Datei schreiben:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatisches Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04-Profile"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "An jedem Tag, an dem Cura gestartet wird, ein automatisches Backup erstellen."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Backups"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Wiederherstellen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Beim Versuch, Ihr Backup hochzuladen, trat ein Fehler auf."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Backup löschen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Ihr Backup wird erstellt..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Soll dieses Backup wirklich gelöscht werden? Der Vorgang kann nicht rückgängig gemacht werden."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Beim Erstellen Ihres Backups ist ein Fehler aufgetreten."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Backup wiederherstellen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Ihr Backup wird hochgeladen..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Cura muss neu gestartet werden, um Ihre Datensicherung wiederherzustellen. Möchten Sie Cura jetzt schließen?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Ihr Backup wurde erfolgreich hochgeladen."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Ihre Cura-Einstellungen sichern und synchronisieren."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Das Backup überschreitet die maximale Dateigröße."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Anmelden"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Backups verwalten"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Meine Backups"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Backup"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Sie verfügen derzeit über keine Backups. Verwenden Sie die Schaltfläche ‚Jetzt Backup erstellen‘, um ein Backup zu erstellen."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Beim Versuch, Ihr Backup wiederherzustellen, trat ein Fehler auf."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "In der Vorschau-Phase sind Sie auf 5 sichtbare Backups beschränkt. Ein Backup entfernen, um ältere anzusehen."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "Die Datei mit den Beispieldaten kann nicht gelesen werden."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Druckereinstellungen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeWriter unterstützt keinen Textmodus."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Breite)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Nachbearbeitung"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-Code ändern"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Tiefe)"
+msgid "Support Blocker"
+msgstr "Stützstruktur-Blocker"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Höhe)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Erstellt ein Volumen, in dem keine Stützstrukturen gedruckt werden."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Druckbettform"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Vorschau"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Ausgang in Mitte"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Röntgen-Ansicht"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Heizbares Bett"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Druckbett nivellieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Druckraum aufgeheizt"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Upgrades wählen"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-Code-Variante"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Druckkopfeinstellungen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Brückenhöhe"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Anzahl Extruder"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Extruder-Versatzwerte auf GCode anwenden"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "Die hervorgehobenen Bereiche kennzeichnen fehlende oder überschüssige Oberflächen. Beheben Sie die Fehler am Modell und öffnen Sie es erneut in Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Start G-Code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Modellfehler"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Ende G-Code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "Mehr erfahren"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Düseneinstellungen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Solide Ansicht"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Düsengröße"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-Code parsen"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Kompatibler Materialdurchmesser"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-Code-Details"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "X-Versatz Düse"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Stellen Sie sicher, dass der G-Code für Ihren Drucker und Ihre Druckerkonfiguration geeignet ist, bevor Sie die Datei senden. Der Darstellung des G-Codes ist möglicherweise nicht korrekt."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Y-Versatz Düse"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G-Datei"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Kühllüfter-Nr"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Geräteeinstellungen"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "G-Code Extruder-Start"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB-Drucken"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "G-Code Extruder-Ende"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Über USB drucken"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Drucker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Über USB drucken"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Firmware aktualisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Über USB verbunden"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "Die Firmware ist der Teil der Software, der direkt auf Ihrem 3D-Drucker läuft. Diese Firmware kontrolliert die Schrittmotoren, reguliert die Temperatur und sorgt letztlich dafür, dass Ihr Drucker funktioniert."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Ein USB-Druck wird ausgeführt. Das Schließen von Cura beendet diesen Druck. Sind Sie sicher?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Druck wird bearbeitet. Cura kann keinen weiteren Druck via USB starten, bis der vorherige Druck abgeschlossen wurde."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Druck in Bearbeitung"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Geräte werden geladen..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Erstellungen werden eingerichtet ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Aktives Gerät wird initialisiert ..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Gerätemanager wird initialisiert ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Bauraum wird initialisiert ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Die Szene wird eingerichtet..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Die Benutzeroberfläche wird geladen..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Funktion wird initialisiert ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Es kann nur jeweils ein G-Code gleichzeitig geladen werden. Wichtige {0} werden übersprungen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Wenn G-Code geladen wird, kann keine weitere Datei geöffnet werden. Wichtige {0} werden übersprungen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "Die mit neuen Druckern gelieferte Firmware funktioniert, allerdings enthalten neue Versionen üblicherweise mehr Funktionen und Verbesserungen."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Firmware automatisch aktualisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visuell"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Benutzerdefinierte Firmware hochladen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Das visuelle Profil wurde für den Druck visueller Prototypen und Modellen entwickelt, bei denen das Ziel eine hohe visuelle Qualität und eine hohe Oberflächenqualität ist."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "Firmware kann nicht aktualisiert werden, da keine Verbindung zum Drucker besteht."
+msgid "Engineering"
+msgstr "Engineering"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Das Engineering-Profil ist für den Druck von Funktionsprototypen und Endnutzungsteilen gedacht, bei denen Präzision gefragt ist und engere Toleranzen gelten."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "Firmware kann nicht aktualisiert werden, da die Verbindung zum Drucker die Firmware-Aktualisierung nicht unterstützt."
+msgid "Draft"
+msgstr "Entwurf"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Benutzerdefinierte Firmware wählen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Das Entwurfsprofil wurde für erste Prototypen und die Konzeptvalidierung entwickelt, um einen deutlich schnelleren Druck zu ermöglichen."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Firmware-Aktualisierung"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nicht überschrieben"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Möchten Sie {0} wirklich entfernen? Der Vorgang kann nicht rückgängig gemacht werden!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Die Firmware wird aktualisiert."
+msgid "Unknown"
+msgstr "Unbekannt"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Firmware-Aktualisierung abgeschlossen."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Der/die nachfolgende(n) Drucker kann/können nicht verbunden werden, weil er/sie Teil einer Gruppe ist/sind"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Die Firmware-Aktualisierung ist aufgrund eines unbekannten Fehlers fehlgeschlagen."
+msgid "Available networked printers"
+msgstr "Verfügbare vernetzte Drucker"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Berechnet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Bitte stimmen Sie die Materialprofile auf Ihre Drucker ab („synchronisieren“), bevor Sie mit dem Drucken beginnen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Neue Materialien installiert"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Die Firmware-Aktualisierung ist aufgrund eines Kommunikationsfehlers fehlgeschlagen."
+msgid "Custom Material"
+msgstr "Benutzerdefiniertes Material"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Die Firmware-Aktualisierung ist aufgrund eines Eingabe-/Ausgabefehlers fehlgeschlagen."
+msgid "Custom"
+msgstr "Benutzerdefiniert"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Die Firmware-Aktualisierung ist aufgrund von fehlender Firmware fehlgeschlagen."
+msgid "Custom profiles"
+msgstr "Benutzerdefinierte Profile"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Projekt öffnen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Alle unterstützten Typen ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Vorhandenes aktualisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Alle Dateien (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Neu erstellen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Die Erstellung eines Materialarchivs zur Synchronisierung mit Druckern ist fehlgeschlagen."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Zusammenfassung – Cura-Projekt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Das Archiv der Materialien konnte nicht geladen werden, um es mit Druckern zu synchronisieren."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Druckereinstellungen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "Die Antwort von Digital Factory scheint beschädigt zu sein."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Wie soll der Konflikt im Gerät gelöst werden?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "In der Antwort von Digital Factory fehlen wichtige Informationen."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Typ"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Die Verbindung mit Digital Factory zum Synchronisieren von Materialien mit einigen Druckern ist fehlgeschlagen."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Druckergruppe"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Es konnte keine Verbindung zu Digital Factory hergestellt werden."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profileinstellungen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Konnte kein Archiv von Benutzer-Datenverzeichnis {} erstellen"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Wie soll der Konflikt im Profil gelöst werden?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Versucht, ein Cura-Backup-Verzeichnis ohne entsprechende Daten oder Metadaten wiederherzustellen."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Name"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Versucht, ein Cura-Backup wiederherzustellen, das eine höhere Version als die aktuelle hat."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "Beim Versuch, ein Backup von Cura wiederherzustellen, trat der folgende Fehler auf:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Nicht im Profil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Neue Position für Objekte finden"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 überschreiben"
-msgstr[1] "%1 überschreibt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Position finden"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Ableitung von"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Innerhalb der Druckabmessung für alle Objekte konnte keine Position gefunden werden"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 überschreiben"
-msgstr[1] "%1, %2 überschreibt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Kann Position nicht finden"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Materialeinstellungen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Login fehlgeschlagen"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Wie soll der Konflikt im Material gelöst werden?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Außenwand"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Sichtbarkeit einstellen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Innenwände"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modus"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Außenhaut"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Sichtbare Einstellungen:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Füllung"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 von %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Stützstruktur-Füllung"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Das Laden eines Projekts entfernt alle Modelle von der Druckplatte."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Stützstruktur-Schnittstelle"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Öffnen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Stützstruktur"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Plugin Nachbearbeitung"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Skirt"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Skripts Nachbearbeitung"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Einzugsturm"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Ein Skript hinzufügen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Bewegungen"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Einzüge"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Sonstige"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Einstellungen"
+msgid "Group #{group_nr}"
+msgstr "Gruppe #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Aktive Nachbearbeitungsskripts ändern."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "Die Versionshinweise konnten nicht geöffnet werden."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "Die folgenden Skript ist aktiv:"
-msgstr[1] "Die folgenden Skripte sind aktiv:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Überspringen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Bild konvertieren..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Schließen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Der Maximalabstand von jedem Pixel von der „Basis“."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Höhe (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Beenden"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Die Basishöhe von der Druckplatte in Millimetern."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Abbrechen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Basis (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Weiter"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Die Breite der Druckplatte in Millimetern."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Die Höhe der Druckabmessung wurde aufgrund des Wertes der Einstellung „Druckreihenfolge“ reduziert, um eine Kollision der Brücke mit den gedruckten Modellen zu verhindern."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Breite (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Produktabmessungen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Die Tiefe der Druckplatte in Millimetern"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "Materialarchiv konnte nicht in {} gespeichert werden:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Tiefe (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Speichern des Materialarchivs fehlgeschlagen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Für Lithophanien sollten dunkle Pixel dickeren Positionen entsprechen, um mehr einfallendes Licht zu blockieren. Für Höhenkarten stellen hellere Pixel höheres Terrain dar, sodass hellere Pixel dickeren Positionen im generierten 3D-Modell entsprechen sollten."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Unbekannter Fehler."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Dunkler ist höher"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "Datei bereits vorhanden"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Heller ist höher"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Die Datei <filename>{0}</filename> ist bereits vorhanden. Soll die Datei wirklich überschrieben werden?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Für Lithophanien ist ein einfaches logarithmisches Modell für Transparenz verfügbar. Bei Höhenprofilen entsprechen die Pixelwerte den Höhen linear."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "Ungültige Datei-URL:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Linear"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Nicht unterstützt"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Transparenz"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Der Prozentsatz an Licht, der einen Druck von einer Dicke mit 1 Millimeter durchdringt. Senkt man diesen Wert, steigt der Kontrast in den dunkleren Bereichen, während der Kontrast in den helleren Bereichen des Bilds sinkt."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Die Einstellungen wurden an die aktuell verfügbaren Extruder angepasst:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1 mm Durchlässigkeit (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Einstellungen aktualisiert"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Die Stärke der Glättung, die für das Bild angewendet wird."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder deaktiviert"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Glättung"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Export des Profils nach <filename>{0}</filename> fehlgeschlagen: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Export des Profils nach <filename>{0}</filename> fehlgeschlagen: Fehlermeldung von Writer-Plugin."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Wählen Sie bitte alle Upgrades für dieses Ultimaker-Original"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Profil wurde nach <filename>{0}</filename> exportiert"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Beheizte Druckplatte (offizielles Kit oder Eigenbau)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Export erfolgreich ausgeführt"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivellierung der Druckplatte"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Import des Profils aus Datei <filename>{0}</filename>: {1} fehlgeschlagen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Um sicherzustellen, dass Ihre Drucke hervorragend werden, können Sie nun Ihre Druckplatte justieren. Wenn Sie auf „Gehe zur nächsten Position“ klicken, bewegt sich die Düse zu den verschiedenen Positionen, die justiert werden können."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Import des Profils aus Datei <filename>{0}</filename> kann erst durchgeführt werden, wenn ein Drucker hinzugefügt wurde."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Legen Sie für jede Position ein Blatt Papier unter die Düse und stellen Sie die Höhe der Druckplatte ein. Die Höhe der Druckplatte ist korrekt, wenn das Papier von der Spitze der Düse leicht berührt wird."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Kein benutzerdefiniertes Profil für das Importieren in Datei <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Nivellierung der Druckplatte starten"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Import des Profils aus Datei <filename>{0}</filename> fehlgeschlagen:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Gehe zur nächsten Position"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Dieses Profil <filename>{0}</filename> enthält falsche Daten, Importieren nicht möglich."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Weitere Informationen zur anonymen Datenerfassung"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Import des Profils aus Datei <filename>{0}</filename> fehlgeschlagen:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura erfasst anonyme Daten, um die Druckqualität und Benutzererfahrung zu steigern. Nachfolgend ist ein Beispiel aller Daten, die geteilt werden:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "Profil {0} erfolgreich importiert."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Ich möchte keine anonymen Daten senden"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "Datei {0} enthält kein gültiges Profil."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Senden von anonymen Daten erlauben"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Profil {0} hat einen unbekannten Dateityp oder ist beschädigt."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marktplatz"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Benutzerdefiniertes Profil"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Cura muss neu gestartet werden, um die Änderungen der Pakete zu übernehmen."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Für das Profil fehlt eine Qualitätsangabe."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "%1 beenden"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Es ist noch kein Drucker aktiv."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Installieren"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "Das Profil kann nicht hinzugefügt werden."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Installiert"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "Der Qualitätstyp „{0}“ ist nicht mit der aktuell aktiven Maschinendefinition „{1}“ kompatibel."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Warnung: Das Profil wird nicht angezeigt, weil sein Qualitätstyp „{0}“ für die aktuelle Konfiguration nicht verfügbar ist. Wechseln Sie zu einer Material-/Düsenkombination, die mit diesem Qualitätstyp kompatibel ist."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Zum Web Marketplace gehen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Objekte vervielfältigen und platzieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Materialien suchen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Objekte platzieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Kompatibilität"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Objekt-Platzierung"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Gerät"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Es kann kein neuer Anmeldevorgang gestartet werden. Bitte überprüfen Sie, ob noch ein weiterer Anmeldevorgang aktiv ist."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Druckbett"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Der Ultimaker-Konto-Server konnte nicht erreicht werden."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Support"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "Anmeldung fehlgeschlagen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualität"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Antwort konnte nicht gelesen werden."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Technisches Datenblatt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "Angegebener Status ist falsch."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Sicherheitsdatenblatt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Zeitüberschreitung bei der Authentifizierung mit dem Kontoserver."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Druckrichtlinien"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Erteilen Sie bitte die erforderlichen Freigaben bei der Autorisierung dieser Anwendung."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Website"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Bei dem Versuch, sich anzumelden, trat ein unerwarteter Fehler auf. Bitte erneut versuchen."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href=‘%1‘>Anmeldung</a> für Installation oder Update erforderlich"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura kann nicht starten"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href=‘%1‘>Materialspulen kaufen</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Hoppla, bei Ultimaker Cura ist ein Problem aufgetreten.</p></b>\n"
+"                    <p>Beim Start ist ein nicht behebbarer Fehler aufgetreten. Er wurde möglicherweise durch einige falsche Konfigurationsdateien verursacht. Wir empfehlen ein Backup und Reset Ihrer Konfiguration.</p>\n"
+"                    <p>Backups sind im Konfigurationsordner abgelegt.</p>\n"
+"                    <p>Senden Sie uns diesen Absturzbericht bitte, um das Problem zu beheben.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Aktualisierung"
+msgid "Send crash report to Ultimaker"
+msgstr "Absturzbericht an Ultimaker senden"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Aktualisierung wird durchgeführt"
+msgid "Show detailed crash report"
+msgstr "Detaillierten Absturzbericht anzeigen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Aktualisiert"
+msgid "Show configuration folder"
+msgstr "Konfigurationsordner anzeigen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Zurück"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plugins"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materialien"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Installiert"
+msgid "Backup and Reset Configuration"
+msgstr "Backup und Reset der Konfiguration"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Installiert nach Neustart"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Crash-Bericht"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href=‘%1‘>Anmeldung</a> für Update erforderlich"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Ein schwerer Fehler ist in Cura aufgetreten. Senden Sie uns diesen Absturzbericht, um das Problem zu beheben</p></b>\n"
+"            <p>Verwenden Sie bitte die Schaltfläche „Bericht senden“, um den Fehlerbericht automatisch an unsere Server zu senden</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgraden"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Systeminformationen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Deinstallieren"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Unbekannt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Community-Beiträge"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Cura-Version"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Community-Plugins"
+msgid "Cura language"
+msgstr "Cura-Sprache"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Generische Materialien"
+msgid "OS language"
+msgstr "Sprache des Betriebssystems"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Pakete werden abgeholt..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Plattform"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Website"
+msgid "Qt version"
+msgstr "Qt Version"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "E-Mail"
+msgid "PyQt version"
+msgstr "PyQt Version"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Bitte melden Sie sich an, um verifizierte Plugins und Materialien für Ultimaker Cura Enterprise zu erhalten"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Version"
+msgid "Not yet initialized<br/>"
+msgstr "Noch nicht initialisiert<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Zuletzt aktualisiert"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGL-Version: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marke"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL-Anbieter: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Downloads"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL-Renderer: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Installierte Plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Fehler-Rückverfolgung"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Es wurde kein Plugin installiert."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Protokolle"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Installierte Materialien"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Bericht senden"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Es wurde kein Material installiert."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Stellen Sie sicher, dass der Drucker verbunden ist:\n"
+"– Prüfen Sie, ob der Drucker eingeschaltet ist.– Prüfen Sie, ob der Drucker mit dem Netzwerk verbunden ist.\n"
+"– Prüfen Sie, ob Sie angemeldet sind, falls Sie über die Cloud verbundene Drucker suchen möchten."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Gebündelte Plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Verbinden Sie Ihren Drucker bitte mit dem Netzwerk."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Gebündelte Materialien"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Benutzerhandbücher online anzeigen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Verbindung zur Cura Paket-Datenbank konnte nicht hergestellt werden. Bitte überprüfen Sie Ihre Verbindung."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Um Ihren Druck von Cura aus zu überwachen, schließen Sie bitte den Drucker an."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Sie müssen die Lizenz akzeptieren, um das Paket zu installieren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Einstellungen für die benutzerdefinierte Anpassung dieses Modells wählen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Änderungen in deinem Konto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtern..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Verwerfen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Alle anzeigen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Weiter"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Mesh-Typ"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Die folgenden Pakete werden hinzugefügt:"
+msgid "Normal model"
+msgstr "Normales Modell"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Die folgenden Pakete können nicht hinzugefügt werden, weil die Cura-Version nicht kompatibel ist:"
+msgid "Print as support"
+msgstr "Als Stützstruktur drucken"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Deinstallieren bestätigen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Einstellungen für Überlappungen ändern"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Sie sind dabei, Materialien und/oder Profile zu deinstallieren, die noch verwendet werden. Durch Bestätigen werden die folgenden Materialien/Profile auf ihre Standardeinstellungen zurückgesetzt."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "Überlappungen nicht unterstützen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materialien"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Nur Mesh-Füllung"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Mesh beschneiden"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Bestätigen"
+msgid "Select settings"
+msgstr "Einstellungen wählen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Firmware aktualisieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Farbschema"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "Die Firmware ist der Teil der Software, der direkt auf Ihrem 3D-Drucker läuft. Diese Firmware kontrolliert die Schrittmotoren, reguliert die Temperatur und sorgt letztlich dafür, dass Ihr Drucker funktioniert."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Materialfarbe"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "Die mit neuen Druckern gelieferte Firmware funktioniert, allerdings enthalten neue Versionen üblicherweise mehr Funktionen und Verbesserungen."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Linientyp"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Firmware automatisch aktualisieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Geschwindigkeit"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Benutzerdefinierte Firmware hochladen"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Schichtdicke"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "Firmware kann nicht aktualisiert werden, da keine Verbindung zum Drucker besteht."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Linienbreite"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "Firmware kann nicht aktualisiert werden, da die Verbindung zum Drucker die Firmware-Aktualisierung nicht unterstützt."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Fluss"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Benutzerdefinierte Firmware wählen"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Kompatibilitätsmodus"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Firmware-Aktualisierung"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Bewegungen"
+msgid "Updating firmware."
+msgstr "Die Firmware wird aktualisiert."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Helfer"
+msgid "Firmware update completed."
+msgstr "Firmware-Aktualisierung abgeschlossen."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Gehäuse"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Die Firmware-Aktualisierung ist aufgrund eines unbekannten Fehlers fehlgeschlagen."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Füllung"
+msgid "Firmware update failed due to an communication error."
+msgstr "Die Firmware-Aktualisierung ist aufgrund eines Kommunikationsfehlers fehlgeschlagen."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "Startet"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Die Firmware-Aktualisierung ist aufgrund eines Eingabe-/Ausgabefehlers fehlgeschlagen."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Nur obere Schichten anzeigen"
+msgid "Firmware update failed due to missing firmware."
+msgstr "Die Firmware-Aktualisierung ist aufgrund von fehlender Firmware fehlgeschlagen."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "5 detaillierte Schichten oben anzeigen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Abgebrochen"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Oben/Unten"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Beendet"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Innenwand"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Vorbereitung..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Wird abgebrochen..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "max"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Fehlgeschlagen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Wird pausiert..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Pausiert"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Wird fortgesetzt..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Handlung erforderlich"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Fertigstellung %1 um %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Drucker verwalten"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Glas"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Damit Sie die Warteschlange aus der Ferne verwalten können, müssen Sie die Druckfirmware aktualisieren."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Webcam-Feeds für Cloud-Drucker können nicht in Ultimaker Cura angezeigt werden. Klicken Sie auf „Drucker verwalten“, um die Ultimaker Digital Factory zu besuchen und diese Webcam zu sehen."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Lädt..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Nicht verfügbar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Nicht erreichbar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Leerlauf"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Vorbereitung..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Drucken"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Unbenannt"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonym"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Erfordert Konfigurationsänderungen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Details"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Drucker nicht verfügbar"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Zuerst verfügbar"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "In Warteschlange"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Im Browser verwalten"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Die Warteschlange enthält keine Druckaufträge. Slicen Sie einen Auftrag und schicken Sie ihn ab, um ihn zur Warteschlange hinzuzufügen."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Druckaufträge"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Druckdauer insgesamt"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Warten auf"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Drucken über Netzwerk"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Drucken"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Druckerauswahl"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Konfigurationsänderungen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Überschreiben"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "Der zugewiesene Drucker %1 erfordert die folgende Konfigurationsänderung:"
 msgstr[1] "Der zugewiesene Drucker %1 erfordert die folgenden Konfigurationsänderungen:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "Der Drucker %1 wurde zugewiesen, allerdings enthält der Auftrag eine unbekannte Materialkonfiguration."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Material %1 von %2 auf %3 wechseln."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "%3 als Material %1 laden (Dies kann nicht übergangen werden)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Print Core %1 von %2 auf %3 wechseln."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Druckplatte auf %1 wechseln (Dies kann nicht übergangen werden)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Überschreiben verwendet die definierten Einstellungen mit der vorhandenen Druckerkonfiguration. Dies kann zu einem fehlgeschlagenen Druck führen."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Aluminium"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Beendet"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Wird abgebrochen..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Abgebrochen"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Fehlgeschlagen"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Wird pausiert..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Pausiert"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Wird fortgesetzt..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Drucken über Netzwerk"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Handlung erforderlich"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Drucken"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Fertigstellung %1 um %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Druckerauswahl"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Anschluss an vernetzten Drucker"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Um direkt auf Ihrem Drucker über das Netzwerk zu drucken, muss der Drucker über ein Netzwerkkabel oder per WLAN mit dem Netzwerk verbunden sein. Wenn Sie Cura nicht mit Ihrem Drucker verbinden, können Sie G-Code-Dateien auf einen USB-Stick kopieren und diesen am Drucker anschließen."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Wählen Sie Ihren Drucker aus der folgenden Liste aus:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Bearbeiten"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Entfernen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Aktualisieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Wenn Ihr Drucker nicht aufgeführt ist, lesen Sie die <a href='%1'>Anleitung für Fehlerbehebung für Netzwerkdruck</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Typ"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Firmware-Version"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adresse"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Dieser Drucker ist nicht eingerichtet um eine Gruppe von Druckern anzusteuern."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Dieser Drucker steuert eine Gruppe von %1 Druckern an."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Der Drucker unter dieser Adresse hat nicht reagiert."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Verbinden"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Ungültige IP-Adresse"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Bitte eine gültige IP-Adresse eingeben."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Druckeradresse"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Geben Sie die IP-Adresse Ihres Druckers in das Netzwerk ein."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Drucker nicht verfügbar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "Zuerst verfügbar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Vorziehen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Löschen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Zurückkehren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Wird pausiert..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Wird fortgesetzt..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pausieren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Wird abgebrochen..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Abbrechen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Soll dieser %1 wirklich an den Anfang der Warteschlange vorgezogen werden?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Druckauftrag vorziehen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Soll %1 wirklich gelöscht werden?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Druckauftrag löschen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Möchten Sie %1 wirklich abbrechen?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Drucken abbrechen"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "In Warteschlange"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Im Browser verwalten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Die Warteschlange enthält keine Druckaufträge. Slicen Sie einen Auftrag und schicken Sie ihn ab, um ihn zur Warteschlange hinzuzufügen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Druckaufträge"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Druckdauer insgesamt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Warten auf"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Farbschema"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Materialfarbe"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Linientyp"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Geschwindigkeit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Schichtdicke"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Linienbreite"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Fluss"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Kompatibilitätsmodus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Bewegungen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Helfer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Gehäuse"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Füllung"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "Startet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Nur obere Schichten anzeigen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "5 detaillierte Schichten oben anzeigen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Oben/Unten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Innenwand"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "min"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "max"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Stellen Sie sicher, dass der Drucker verbunden ist:\n"
-"– Prüfen Sie, ob der Drucker eingeschaltet ist.– Prüfen Sie, ob der Drucker mit dem Netzwerk verbunden ist.\n"
-"– Prüfen Sie, ob Sie angemeldet sind, falls Sie über die Cloud verbundene Drucker suchen möchten."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Verbinden Sie Ihren Drucker bitte mit dem Netzwerk."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Höhe (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Benutzerhandbücher online anzeigen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Der Maximalabstand von jedem Pixel von der „Basis“."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Um Ihren Druck von Cura aus zu überwachen, schließen Sie bitte den Drucker an."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Basis (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Einige Punkte bei diesem Druck könnten problematisch sein. Klicken Sie, um Tipps für die Anpassung zu erhalten."
+msgid "The base height from the build plate in millimeters."
+msgstr "Die Basishöhe von der Druckplatte in Millimetern."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Breite (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D-Ansicht"
+msgid "The width in millimeters on the build plate"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Tiefe (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Vorderansicht"
+msgid "The depth in millimeters on the build plate"
+msgstr "Die Tiefe der Druckplatte in Millimetern"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Dunkler ist höher"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Heller ist höher"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Draufsicht"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Für Lithophanien sollten dunkle Pixel dickeren Positionen entsprechen, um mehr einfallendes Licht zu blockieren. Für Höhenkarten stellen hellere Pixel höheres Terrain dar, sodass hellere Pixel dickeren Positionen im generierten 3D-Modell entsprechen sollten."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Linear"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Transparenz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Ansicht von links"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Für Lithophanien ist ein einfaches logarithmisches Modell für Transparenz verfügbar. Bei Höhenprofilen entsprechen die Pixelwerte den Höhen linear."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1 mm Durchlässigkeit (%)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Ansicht von rechts"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Der Prozentsatz an Licht, der einen Druck von einer Dicke mit 1 Millimeter durchdringt. Senkt man diesen Wert, steigt der Kontrast in den dunkleren Bereichen, während der Kontrast in den helleren Bereichen des Bilds sinkt."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Objektliste"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Glättung"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Die Stärke der Glättung, die für das Bild angewendet wird."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marktplatz"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Datei"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Projekt öffnen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Bearbeiten"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Vorhandenes aktualisieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Ansicht"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Neu erstellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Einstellungen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Zusammenfassung – Cura-Projekt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Er&weiterungen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Wie soll der Konflikt im Gerät gelöst werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "&Konfiguration"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Druckereinstellungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Hilfe"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Typ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Neues Projekt"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Druckergruppe"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Möchten Sie wirklich ein neues Projekt beginnen? Damit werden das Druckbett und alle nicht gespeicherten Einstellungen gelöscht."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Wie soll der Konflikt im Profil gelöst werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Das Slicing läuft..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profileinstellungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Slicing nicht möglich"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Name"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Nicht im Profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 überschreiben"
+msgstr[1] "%1 überschreibt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Ableitung von"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 überschreiben"
+msgstr[1] "%1, %2 überschreibt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Wie soll der Konflikt im Material gelöst werden?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Materialeinstellungen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Sichtbarkeit einstellen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modus"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Sichtbare Einstellungen:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 von %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Das Laden eines Projekts entfernt alle Modelle von der Druckplatte."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Öffnen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Verarbeitung läuft"
+msgid "Want more?"
+msgstr "Möchten Sie mehr?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Slice"
+msgid "Backup Now"
+msgstr "Jetzt Backup durchführen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Slicing-Vorgang starten"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatisches Backup"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Abbrechen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "An jedem Tag, an dem Cura gestartet wird, ein automatisches Backup erstellen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Zeitschätzung"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura-Version"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Materialschätzung"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Maschinen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materialien"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Keine Zeitschätzung verfügbar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plugins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Keine Kostenschätzung verfügbar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Wiederherstellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Backup löschen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Soll dieses Backup wirklich gelöscht werden? Der Vorgang kann nicht rückgängig gemacht werden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Backup wiederherstellen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Cura muss neu gestartet werden, um Ihre Datensicherung wiederherzustellen. Möchten Sie Cura jetzt schließen?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Ihre Cura-Einstellungen sichern und synchronisieren."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Vorschau"
+msgid "Sign in"
+msgstr "Anmelden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Einen Drucker hinzufügen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Meine Backups"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Sie verfügen derzeit über keine Backups. Verwenden Sie die Schaltfläche ‚Jetzt Backup erstellen‘, um ein Backup zu erstellen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "In der Vorschau-Phase sind Sie auf 5 sichtbare Backups beschränkt. Ein Backup entfernen, um ältere anzusehen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura-Backups"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Weitere Informationen zur anonymen Datenerfassung"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura erfasst anonyme Daten, um die Druckqualität und Benutzererfahrung zu steigern. Nachfolgend ist ein Beispiel aller Daten, die geteilt werden:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Ich möchte keine anonymen Daten senden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Senden von anonymen Daten erlauben"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Plugin Nachbearbeitung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Einen vernetzten Drucker hinzufügen"
+msgid "Post Processing Scripts"
+msgstr "Skripts Nachbearbeitung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Ein Skript hinzufügen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Einen unvernetzten Drucker hinzufügen"
+msgid "Settings"
+msgstr "Einstellungen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Aktive Nachbearbeitungsskripts ändern."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "Die folgenden Skript ist aktiv:"
+msgstr[1] "Die folgenden Skripte sind aktiv:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Einen Cloud-Drucker hinzufügen"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Wählen Sie bitte alle Upgrades für dieses Ultimaker-Original"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Auf eine Antwort von der Cloud warten"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Beheizte Druckplatte (offizielles Kit oder Eigenbau)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivellierung der Druckplatte"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Keine Drucker in Ihrem Konto gefunden?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Um sicherzustellen, dass Ihre Drucke hervorragend werden, können Sie nun Ihre Druckplatte justieren. Wenn Sie auf „Gehe zur nächsten Position“ klicken, bewegt sich die Düse zu den verschiedenen Positionen, die justiert werden können."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Folgende Drucker in Ihrem Konto wurden zu Cura hinzugefügt:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Legen Sie für jede Position ein Blatt Papier unter die Düse und stellen Sie die Höhe der Druckplatte ein. Die Höhe der Druckplatte ist korrekt, wenn das Papier von der Spitze der Düse leicht berührt wird."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Nivellierung der Druckplatte starten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Gehe zur nächsten Position"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Drucker manuell hinzufügen"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Drucker nach IP-Adresse hinzufügen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Geben Sie die IP-Adresse Ihres Druckers ein."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Hinzufügen"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Verbindung mit Drucker nicht möglich."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "%1 beenden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Sie können keine Verbindung zu Ihrem Ultimaker-Drucker herstellen?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Der Drucker unter dieser Adresse hat noch nicht reagiert."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Dieser Drucker kann nicht hinzugefügt werden, weil es sich um einen unbekannten Drucker handelt oder er nicht im Host einer Gruppe enthalten ist."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Zurück"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Verbinden"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Benutzervereinbarung"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Ablehnen und schließen"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Willkommen bei Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"Befolgen Sie bitte diese Schritte für das Einrichten von\n"
-"Ultimaker Cura. Dies dauert nur wenige Sekunden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Erste Schritte"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Bei der Ultimaker-Plattform anmelden"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Materialeinstellungen und Plug-ins aus dem Marketplace hinzufügen"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Materialeinstellungen und Plug-ins sichern und synchronisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Ideenaustausch mit und Hilfe von mehr als 48.000 Benutzern in der Ultimaker Community"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Überspringen"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Ablehnen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Kostenloses Ultimaker-Konto erstellen"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Drucker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Düseneinstellungen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Hersteller"
+msgid "Nozzle size"
+msgstr "Düsengröße"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor des Profils"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Druckername"
+msgid "Compatible material diameter"
+msgstr "Kompatibler Materialdurchmesser"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Bitte weisen Sie Ihrem Drucker einen Namen zu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "X-Versatz Düse"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Kein Drucker in Ihrem Netzwerk gefunden."
+msgid "Nozzle offset Y"
+msgstr "Y-Versatz Düse"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Aktualisieren"
+msgid "Cooling Fan Number"
+msgstr "Kühllüfter-Nr"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "G-Code Extruder-Start"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "G-Code Extruder-Ende"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Druckereinstellungen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Drucker nach IP hinzufügen"
+msgid "X (Width)"
+msgstr "X (Breite)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Ein Cloud-Drucker hinzufügen"
+msgid "Y (Depth)"
+msgstr "Y (Tiefe)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Störungen beheben"
+msgid "Z (Height)"
+msgstr "Z (Höhe)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Helfen Sie uns, Ultimaker Cura zu verbessern"
+msgid "Build plate shape"
+msgstr "Druckbettform"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura erfasst anonyme Daten, um die Druckqualität und Benutzererfahrung zu steigern. Dazu gehören:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Ausgang in Mitte"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Gerätetypen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Heizbares Bett"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Materialverbrauch"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Druckraum aufgeheizt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Anzahl der Slices"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-Code-Variante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Druckeinstellungen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Druckkopfeinstellungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Die von Ultimaker Cura erfassten Daten enthalten keine personenbezogenen Daten."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Mehr Informationen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "Neuheiten"
+msgid "X max"
+msgstr "X max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Leer"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Versionshinweise"
+msgid "Gantry Height"
+msgstr "Brückenhöhe"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Anzahl Extruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Extruder-Versatzwerte auf GCode anwenden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Start G-Code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Ende G-Code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "Meine Drucker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Überwachen Sie Drucker in der Ultimaker Digital Factory."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Erstellen Sie Druckprojekte in der digitalen Bibliothek."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Druckaufträge"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Überwachen Sie Druckaufträge und drucken Sie sie aus Ihrem Druckprotokoll nach."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Erweitern Sie Ultimaker Cura durch Plugins und Materialprofile."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Werden Sie ein 3D-Druck-Experte mittels des E-Learning von Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Ultimaker Kundendienst"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Erfahren Sie, wie Sie mit Ultimaker Cura Ihre Arbeit beginnen können."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Eine Frage stellen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Wenden Sie sich an die Ultimaker Community."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Einen Fehler melden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Lassen Sie es die Entwickler wissen, falls etwas schief läuft."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Besuchen Sie die Ultimaker-Website."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Ausgewähltes Modell drucken mit %1"
+msgstr[1] "Ausgewählte Modelle drucken mit %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Einstellungen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Neues Projekt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Möchten Sie wirklich ein neues Projekt beginnen? Damit werden das Druckbett und alle nicht gespeicherten Einstellungen gelöscht."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marktplatz"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Druckbett"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "Die Zieltemperatur des heizbaren Betts. Das Bett wird auf diese Temperatur aufgeheizt oder abgekühlt. Wenn der Wert 0 beträgt, wird die Bettheizung ausgeschaltet."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "Die aktuelle Temperatur des beheizten Betts."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "Die Temperatur, auf die das Bett vorgeheizt wird."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Abbrechen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Vorheizen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Heizen Sie das Bett vor Druckbeginn auf. Sie können Ihren Druck während des Aufheizens weiter anpassen und müssen nicht warten, bis das Bett aufgeheizt ist, wenn Sie druckbereit sind."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "Der Drucker ist nicht verbunden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Druckersteuerung"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Tippposition"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Tippdistanz"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "G-Code senden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Einen benutzerdefinierten G-Code-Befehl an den verbundenen Drucker senden. „Eingabe“ drücken, um den Befehl zu senden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Extruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Die Zieltemperatur des Hotend. Das Hotend wird auf diese Temperatur aufgeheizt oder abgekühlt. Wenn der Wert 0 beträgt, wird die Hotend-Heizung ausgeschaltet."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Die aktuelle Temperatur dieses Hotends."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "Die Temperatur, auf die das Hotend vorgeheizt wird."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Heizen Sie das Hotend vor Druckbeginn auf. Sie können Ihren Druck während des Aufheizens weiter anpassen und müssen nicht warten, bis das Hotend aufgeheizt ist, wenn Sie druckbereit sind."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Die Farbe des Materials in diesem Extruder."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Das Material in diesem Extruder."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "Die in diesem Extruder eingesetzte Düse."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Projektdatei öffnen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Dies ist eine Cura-Projektdatei. Möchten Sie diese als Projekt öffnen oder die Modelle hieraus importieren?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Meine Auswahl merken"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Als Projekt öffnen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modelle importieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Projekt speichern"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Extruder %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Projektzusammenfassung beim Speichern nicht erneut anzeigen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Speichern"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Datei(en) öffnen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Es wurden eine oder mehrere Projektdatei(en) innerhalb der von Ihnen gewählten Dateien gefunden. Sie können nur eine Projektdatei auf einmal öffnen. Es wird empfohlen, nur Modelle aus diesen Dateien zu importieren. Möchten Sie fortfahren?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Alle als Modelle importieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Über %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "Version: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Komplettlösung für den 3D-Druck mit geschmolzenem Filament."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3614,2199 +3594,2385 @@ msgstr ""
 "Cura wurde von Ultimaker B.V. in Zusammenarbeit mit der Community entwickelt.\n"
 "Cura verwendet mit Stolz die folgenden Open Source-Projekte:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafische Benutzerschnittstelle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Anwendungsrahmenwerk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-Code-Generator"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Bibliothek Interprozess-Kommunikation"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programmiersprache"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI-Rahmenwerk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI-Rahmenwerk Einbindungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ Einbindungsbibliothek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Format Datenaustausch"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Support-Bibliothek für wissenschaftliche Berechnung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Support-Bibliothek für schnelleres Rechnen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Support-Bibliothek für die Handhabung von STL-Dateien"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Support-Bibliothek für die Handhabung von ebenen Objekten"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Support-Bibliothek für die Handhabung von dreieckigen Netzen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Support-Bibliothek für die Handhabung von 3MF-Dateien"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Support-Bibliothek für Datei-Metadaten und Streaming"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Bibliothek für serielle Kommunikation"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Bibliothek für ZeroConf-Erkennung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Bibliothek für Polygon-Beschneidung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Statischer Prüfer für Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Root-Zertifikate zur Validierung der SSL-Vertrauenswürdigkeit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python-Fehlerverfolgungs-Bibliothek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Polygon-Packaging-Bibliothek, entwickelt von Prusa Research"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Python-Bindungen für libnest2d"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Unterstützungsbibliothek für den Zugriff auf den Systemschlüsselbund"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Python-Erweiterungen für Microsoft Windows"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Schriftart"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG-Symbole"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Distributionsunabhängiges Format für Linux-Anwendungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Datei(en) öffnen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Es wurden eine oder mehrere Projektdatei(en) innerhalb der von Ihnen gewählten Dateien gefunden. Sie können nur eine Projektdatei auf einmal öffnen. Es wird empfohlen, nur Modelle aus diesen Dateien zu importieren. Möchten Sie fortfahren?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Alle als Modelle importieren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Projekt speichern"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Extruder %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & Material"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Material"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Projektzusammenfassung beim Speichern nicht erneut anzeigen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Speichern"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Änderungen verwerfen oder übernehmen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"Sie haben einige Profileinstellungen personalisiert.\n"
-"Möchten Sie diese geänderten Einstellungen nach einem Profilwechsel beibehalten?\n"
-"Sie können die Änderungen auch verwerfen, um die Standardeinstellungen von '%1' zu laden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Profileinstellungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Aktuelle Änderungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Stets nachfragen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Verwerfen und zukünftig nicht mehr nachfragen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Übernehmen und zukünftig nicht mehr nachfragen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Änderungen verwerfen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Änderungen speichern"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Projektdatei öffnen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "Keine auswählbaren Einträge"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Dies ist eine Cura-Projektdatei. Möchten Sie diese als Projekt öffnen oder die Modelle hieraus importieren?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Datei(en) öffnen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Meine Auswahl merken"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "&Zuletzt geöffnet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Als Projekt öffnen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Sichtbare Einstellungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modelle importieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Alle Kategorien schließen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Sichtbarkeit einstellen verwalten..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Als aktiven Extruder festlegen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Extruder aktivieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Extruder deaktivieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoriten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Generisch"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Hilfe"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Datei"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Projekt speichern ..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportieren..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Auswahl exportieren..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "&Konfiguration"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Bearbeiten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "Dr&ucker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Netzwerkfähige Drucker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Lokale Drucker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Er&weiterungen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfigurationen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Aktiver Druck"
+msgid "Loading available configurations from the printer..."
+msgstr "Verfügbare Konfigurationen werden von diesem Drucker geladen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Name des Auftrags"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Die Konfigurationen sind nicht verfügbar, da der Drucker getrennt ist."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Druckzeit"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Diese Konfigurationen sind nicht verfügbar, weil %1 nicht erkannt wird. Besuchen Sie bitte %2 für das Herunterladen des korrekten Materialprofils."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Geschätzte verbleibende Zeit"
+msgid "Marketplace"
+msgstr "Marktplatz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "Der Cloud-Drucker ist offline. Bitte prüfen Sie, ob der Drucker eingeschaltet und mit dem Internet verbunden ist."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "Die Konfiguration dieses Extruders ist nicht zulässig und verhindert das Slicing."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Der Drucker ist nicht mit Ihrem Konto verbunden. Bitte besuchen Sie die Ultimaker Digital Factory, um eine Verbindung herzustellen."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "Es gibt keine Profile, die mit der Konfiguration dieses Extruders übereinstimmen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "Die Cloud-Verbindung ist aktuell nicht verfügbar. Bitte melden Sie sich an, um sich mit dem Cloud-Drucker zu verbinden."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Konfiguration wählen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "Die Cloud-Verbindung ist aktuell nicht verfügbar. Bitte überprüfen Sie ihre Internetverbindung."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfigurationen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Drucker hinzufügen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Benutzerdefiniert"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Drucker verwalten"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Drucker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Verbundene Drucker"
+msgid "Enabled"
+msgstr "Aktiviert"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Voreingestellte Drucker"
+msgid "Material"
+msgstr "Material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Druckeinstellungen"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Für diese Materialkombination Kleber für eine bessere Haftung verwenden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Druckeinrichtung ist deaktiviert. G-Code-Datei kann nicht geändert werden."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Ausgewähltes Modell drucken mit:"
+msgstr[1] "Ausgewählte Modelle drucken mit:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Ausgewähltes Modell multiplizieren"
+msgstr[1] "Ausgewählte Modelle multiplizieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
+msgid "Number of Copies"
+msgstr "Anzahl Kopien"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Projekt speichern..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Ansicht"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Kameraposition"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Kameraansicht"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Ansicht"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Orthogonal"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Typ anzeigen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Bei der Ultimaker-Plattform anmelden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Einige Einstellungs-/Überschreibungswerte unterscheiden sich von den im Profil gespeicherten Werten.\n"
-"\n"
-"Klicken Sie, um den Profilmanager zu öffnen."
+"- Materialprofile und Plug-ins aus dem Marketplace hinzufügen\n"
+"- Materialprofile und Plug-ins sichern und synchronisieren\n"
+"- Ideenaustausch mit und Hilfe von mehr als 48.000 Benutzern in der Ultimaker Community"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Benutzerdefinierte Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Kostenloses Ultimaker-Konto erstellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Aktuelle Änderungen verwerfen"
+msgid "Sign in"
+msgstr "Anmelden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Letztes Update: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Empfohlen"
+msgid "Ultimaker Account"
+msgstr "Ultimaker‑Konto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Benutzerdefiniert"
+msgid "Sign Out"
+msgstr "Abmelden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Überprüfung läuft ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Konto wurde synchronisiert"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Irgendetwas ist schief gelaufen ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Ausstehende Updates installieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Nach Updates für das Konto suchen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Das Slicing läuft..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Slicing nicht möglich"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Verarbeitung läuft"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Slice"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Slicing-Vorgang starten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Abbrechen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Zeitschätzung"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Materialschätzung"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Keine Zeitschätzung verfügbar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Keine Kostenschätzung verfügbar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Vorschau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Dieses Paket wird nach einem Neustart installiert."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Allgemein"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Einstellungen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Drucker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materialien"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1 wird geschlossen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Möchten Sie %1 wirklich beenden?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Paket installieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Datei(en) öffnen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Es wurden eine oder mehrere G-Code-Datei(en) innerhalb der von Ihnen gewählten Dateien gefunden. Sie können nur eine G-Code-Datei auf einmal öffnen. Wenn Sie eine G-Code-Datei öffnen möchten wählen Sie bitte nur eine Datei."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Drucker hinzufügen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Neuheiten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Ein"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Aus"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Experimentell"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Druckeinstellungen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Druckeinrichtung ist deaktiviert. G-Code-Datei kann nicht geändert werden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Empfohlen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Benutzerdefiniert"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "Es gibt kein %1-Profil für die Konfiguration in der Extruder %2. Es wird stattdessen der Standard verwendet"
 msgstr[1] "Es gibt kein %1-Profil für die Konfigurationen in den Extrudern %2. Es wird stattdessen der Standard verwendet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profile"
+msgid "Gradual infill"
+msgstr "Stufenweise Füllung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Sie haben einige Profileinstellungen geändert. Wenn Sie diese ändern möchten, wechseln Sie in den Modus „Benutzerdefiniert“."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Die graduelle Füllung steigert die Menge der Füllung nach oben hin schrittweise."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Stützstruktur"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Damit werden Strukturen zur Unterstützung von Modellteilen mit Überhängen generiert. Ohne diese Strukturen würden solche Teile während des Druckvorgangs zusammenfallen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Stufenweise Füllung"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Die graduelle Füllung steigert die Menge der Füllung nach oben hin schrittweise."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Sie haben einige Profileinstellungen geändert. Wenn Sie diese ändern möchten, wechseln Sie in den Modus „Benutzerdefiniert“."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Haftung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Drucken eines Brim- oder Raft-Elements aktivieren. Es wird ein flacher Bereich rund um oder unter Ihrem Objekt hinzugefügt, das im Anschluss leicht abgeschnitten werden kann."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Projekt speichern..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Benutzerdefinierte Profile"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Netzwerkfähige Drucker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Aktuelle Änderungen verwerfen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Lokale Drucker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Einige Einstellungs-/Überschreibungswerte unterscheiden sich von den im Profil gespeicherten Werten.\n"
+"\n"
+"Klicken Sie, um den Profilmanager zu öffnen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoriten"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Einstellung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Generisch"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Ausgewähltes Modell drucken mit:"
-msgstr[1] "Ausgewählte Modelle drucken mit:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Aktuell"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Ausgewähltes Modell multiplizieren"
-msgstr[1] "Ausgewählte Modelle multiplizieren"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Anzahl Kopien"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Projekt speichern ..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportieren..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Auswahl exportieren..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Sichtbarkeit einstellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfigurationen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Benutzerdefiniert"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Alle prüfen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktivieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Umbenennen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Änderung Durchmesser bestätigen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Der neue Filament-Durchmesser wurde auf %1 mm eingestellt, was nicht kompatibel mit dem aktuellen Extruder ist. Möchten Sie fortfahren?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Drucker"
+msgid "Display Name"
+msgstr "Namen anzeigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Aktiviert"
+msgid "Brand"
+msgstr "Marke"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Material"
+msgid "Material Type"
+msgstr "Materialtyp"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Für diese Materialkombination Kleber für eine bessere Haftung verwenden."
+msgid "Color"
+msgstr "Farbe"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "Die Konfiguration dieses Extruders ist nicht zulässig und verhindert das Slicing."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "Es gibt keine Profile, die mit der Konfiguration dieses Extruders übereinstimmen."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Eigenschaften"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Konfiguration wählen"
+msgid "Density"
+msgstr "Dichte"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfigurationen"
+msgid "Diameter"
+msgstr "Durchmesser"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Verfügbare Konfigurationen werden von diesem Drucker geladen..."
+msgid "Filament Cost"
+msgstr "Filamentkosten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Die Konfigurationen sind nicht verfügbar, da der Drucker getrennt ist."
+msgid "Filament weight"
+msgstr "Filamentgewicht"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Diese Konfigurationen sind nicht verfügbar, weil %1 nicht erkannt wird. Besuchen Sie bitte %2 für das Herunterladen des korrekten Materialprofils."
+msgid "Filament length"
+msgstr "Filamentlänge"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marktplatz"
+msgid "Cost per Meter"
+msgstr "Kosten pro Meter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Datei(en) öffnen..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Dieses Material ist mit %1 verknüpft und teilt sich damit einige seiner Eigenschaften."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "Dr&ucker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Material trennen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Beschreibung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Als aktiven Extruder festlegen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Haftungsinformationen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Extruder aktivieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Informationen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Extruder deaktivieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Materialien mit Druckern synchronisieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "&Zuletzt geöffnet"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Materialien mit Druckern synchronisieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Sichtbare Einstellungen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "Mit ein paar einfachen Schritten können Sie alle Ihre Materialprofile mit Ihren Druckern synchronisieren."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Alle Kategorien schließen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "Warum muss ich Materialprofile synchronisieren?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Sichtbarkeit einstellen verwalten..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Start"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Kameraposition"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Anmelden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Kameraansicht"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Um die Materialprofile automatisch mit all Ihren mit Digital Factory verbundenen Druckern zu synchronisieren, müssen Sie in Cura angemeldet sein."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Ansicht"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Materialien über USB snchronisieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Orthogonal"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "Die folgenden Drucker erhalten die neuen Materialprofile:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Druckplatte"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "Beim Senden der Materialien an die Drucker ist ein Fehler aufgetreten."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Typ anzeigen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "Materialprofile wurden erfolgreich mit den folgenden Druckern synchronisiert:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Wird als Stückstruktur gedruckt."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Störungen beheben"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Andere Modelle, die sich mit diesem Modell überschneiden, werden angepasst."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "Fehlen Drucker?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Überlappende Füllung wird bei diesem Modell angepasst."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Vergewissern Sie sich, dass alle Ihre Drucker eingeschaltet und mit Digital Factory verbunden sind."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Überlappungen mit diesem Modell werden nicht unterstützt."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Liste aktualisieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Überschreibt %1-Einstellung."
-msgstr[1] "Überschreibt %1-Einstellungen."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Erneut versuchen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Fertig"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktivieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Synchronisieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Erstellen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "Synchronisierung"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "Keine Drucker gefunden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Es scheint, als ob Sie keine kompatiblen Drucker mit Digital Factory verbunden haben. Stellen Sie sicher, dass Ihr Drucker verbunden ist und die neueste Firmware ausgeführt wird."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Erfahren Sie, wie Sie Ihren Drucker mit Digital Factory verbinden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Aktualisieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Synchronisieren von Materialprofilen über USB"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Führen Sie die folgenden Schritte aus, um die neuen Materialprofile in Ihren Drucker zu laden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Klicken Sie auf die Schaltfläche Materialarchiv exportieren."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "Speichern Sie die .umm-Datei auf einem USB-Stick."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "Stecken Sie den USB-Stick in Ihren Drucker und starten Sie das Verfahren zum Laden neuer Materialprofile."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Wie lade ich neue Materialprofile in meinen Drucker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Zurück"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Materialarchiv exportieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Alle Materialien exportieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplizieren"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Umbenennen"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Import"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Export"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profil erstellen"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Geben Sie bitte einen Namen für dieses Profil an."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplizieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profil duplizieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Export"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Entfernen bestätigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Möchten Sie %1 wirklich entfernen? Dies kann nicht rückgängig gemacht werden!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profil umbenennen"
+msgid "Import Material"
+msgstr "Material importieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profil importieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Material wurde erfolgreich importiert <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Material konnte nicht importiert werden <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profil exportieren"
+msgid "Export Material"
+msgstr "Material exportieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Exportieren des Materials nach <filename>%1</filename>: <message>%2</message> schlug fehl"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Material erfolgreich nach <filename>%1</filename> exportiert"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Drucker: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Profil mit aktuellen Einstellungen/Überschreibungen aktualisieren"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Dieses Profil verwendet die vom Drucker festgelegten Standardeinstellungen, deshalb sind in der folgenden Liste keine Einstellungen/Überschreibungen enthalten."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Ihre aktuellen Einstellungen stimmen mit dem gewählten Profil überein."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Globale Einstellungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Allgemein"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profil erstellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Geben Sie bitte einen Namen für dieses Profil an."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profil exportieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profil duplizieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profil umbenennen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profil importieren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Schnittstelle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Währung:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Thema:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Die Anwendung muss neu gestartet werden, um die Änderungen zu übernehmen."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Bei Änderung der Einstellungen automatisch schneiden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatisch schneiden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Viewport-Verhalten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Nicht gestützte Bereiche des Modells in rot hervorheben. Ohne Support werden diese Bereiche nicht korrekt gedruckt."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Überhang anzeigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Heben Sie fehlende oder fehlerhafte Flächen des Modells mithilfe von Warnhinweisen hervor. In den Werkzeugpfaden fehlen oft Teile der beabsichtigten Geometrie."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Modellfehler anzeigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Bewegt die Kamera, bis sich das Modell im Mittelpunkt der Ansicht befindet, wenn ein Modell ausgewählt wurde"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Zentrieren Sie die Kamera, wenn das Element ausgewählt wurde"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Soll das standardmäßige Zoom-Verhalten von Cura umgekehrt werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Kehren Sie die Richtung des Kamera-Zooms um."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Soll das Zoomen in Richtung der Maus erfolgen?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Das Zoomen in Richtung der Maus wird in der orthografischen Perspektive nicht unterstützt."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "In Mausrichtung zoomen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Sollen Modelle auf der Plattform so verschoben werden, dass sie sich nicht länger überschneiden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Stellen Sie sicher, dass die Modelle getrennt gehalten werden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Sollen Modelle auf der Plattform so nach unten verschoben werden, dass sie die Druckplatte  berühren?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Setzt Modelle automatisch auf der Druckplatte ab"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Warnmeldung im G-Code-Reader anzeigen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Warnmeldung in G-Code-Reader"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Soll die Schicht in den Kompatibilitätsmodus gezwungen werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Schichtenansicht Kompatibilitätsmodus erzwingen (Neustart erforderlich)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Sollte Cura sich an der Stelle öffnen, an der das Programm geschlossen wurde?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Fensterposition beim Start wiederherstellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Welches Kamera-Rendering sollte verwendet werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Kamera-Rendering:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Ansicht"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Orthogonal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Dateien öffnen und speichern"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Sollten Dateien vom Desktop oder von externen Anwendungen in derselben Instanz von Cura geöffnet werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Eine einzelne Instanz von Cura verwenden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "Soll das Druckbett jeweils vor dem Laden eines neuen Modells in einer einzelnen Instanz von Cura gelöscht werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Druckbett vor dem Laden des Modells in die Einzelinstanz löschen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Sollen Modelle an das Erstellungsvolumen angepasst werden, wenn sie zu groß sind?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Große Modelle anpassen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Ein Modell kann extrem klein erscheinen, wenn seine Maßeinheit z. B. in Metern anstelle von Millimetern angegeben ist. Sollen diese Modelle hoch skaliert werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Extrem kleine Modelle skalieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Sollten Modelle gewählt werden, nachdem sie geladen wurden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Modelle wählen, nachdem sie geladen wurden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Soll ein Präfix anhand des Druckernamens automatisch zum Namen des Druckauftrags hinzugefügt werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Geräte-Präfix zu Auftragsnamen hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Soll beim Speichern einer Projektdatei eine Zusammenfassung angezeigt werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Dialog Zusammenfassung beim Speichern eines Projekts anzeigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Standardverhalten beim Öffnen einer Projektdatei"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Standardverhalten beim Öffnen einer Projektdatei: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Stets nachfragen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Immer als Projekt öffnen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Modelle immer importieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Wenn Sie Änderungen für ein Profil vorgenommen haben und zu einem anderen Profil gewechselt sind, wird ein Dialog angezeigt, der hinterfragt, ob Sie Ihre Änderungen beibehalten möchten oder nicht; optional können Sie ein Standardverhalten wählen, sodass dieser Dialog nicht erneut angezeigt wird."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Standardverhalten für geänderte Einstellungswerte beim Wechsel zu einem anderen Profil: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Geänderte Einstellungen immer verwerfen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Geänderte Einstellungen immer auf neues Profil übertragen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privatsphäre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Sollen anonyme Daten über Ihren Druck an Ultimaker gesendet werden? Beachten Sie, dass keine Modelle, IP-Adressen oder andere personenbezogene Daten gesendet oder gespeichert werden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(Anonyme) Druckinformationen senden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Mehr Informationen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Updates"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Soll Cura bei Programmstart nach Updates suchen?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Bei Start nach Updates suchen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "Wählen Sie bei der Suche nach Updates nur stabile Versionen aus."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Nur stabile Versionen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "Wählen Sie bei der Suche nach Updates sowohl stabile als auch Beta-Versionen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "Stabile und Beta-Versionen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Sollte jedes Mal, wenn Cura gestartet wird, eine automatische Überprüfung auf neue Plug-ins durchgeführt werden? Es wird dringend empfohlen, diese Funktion nicht zu deaktivieren!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Benachrichtigungen über Plug-in-Updates erhalten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informationen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Drucker nach IP-Adresse hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Änderung Durchmesser bestätigen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Geben Sie die IP-Adresse Ihres Druckers ein."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Der neue Filament-Durchmesser wurde auf %1 mm eingestellt, was nicht kompatibel mit dem aktuellen Extruder ist. Möchten Sie fortfahren?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Namen anzeigen"
+msgid "Could not connect to device."
+msgstr "Verbindung mit Drucker nicht möglich."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Materialtyp"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Sie können keine Verbindung zu Ihrem Ultimaker-Drucker herstellen?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Farbe"
+msgid "The printer at this address has not responded yet."
+msgstr "Der Drucker unter dieser Adresse hat noch nicht reagiert."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Eigenschaften"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Dieser Drucker kann nicht hinzugefügt werden, weil es sich um einen unbekannten Drucker handelt oder er nicht im Host einer Gruppe enthalten ist."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Dichte"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Verbinden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Durchmesser"
+msgid "Release Notes"
+msgstr "Versionshinweise"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Filamentkosten"
+msgid "User Agreement"
+msgstr "Benutzervereinbarung"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Filamentgewicht"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Stimme zu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Filamentlänge"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Ablehnen und schließen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Kosten pro Meter"
+msgid "What's New"
+msgstr "Neuheiten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Weiter"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Dieses Material ist mit %1 verknüpft und teilt sich damit einige seiner Eigenschaften."
+msgid "Add a Cloud printer"
+msgstr "Einen Cloud-Drucker hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Material trennen"
+msgid "Waiting for Cloud response"
+msgstr "Auf eine Antwort von der Cloud warten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Beschreibung"
+msgid "No printers found in your account?"
+msgstr "Keine Drucker in Ihrem Konto gefunden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Haftungsinformationen"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Folgende Drucker in Ihrem Konto wurden zu Cura hinzugefügt:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Erstellen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Drucker manuell hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplizieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Materialeinstellungen und Plug-ins aus dem Marketplace hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Mit Druckern synchronisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Materialeinstellungen und Plug-ins sichern und synchronisieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Drucker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Ideenaustausch mit und Hilfe von mehr als 48.000 Benutzern in der Ultimaker Community"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Material importieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Überspringen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Material konnte nicht importiert werden <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Kostenloses Ultimaker-Konto erstellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Material wurde erfolgreich importiert <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Willkommen bei Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Material exportieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"Befolgen Sie bitte diese Schritte für das Einrichten von\n"
+"Ultimaker Cura. Dies dauert nur wenige Sekunden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Exportieren des Materials nach <filename>%1</filename>: <message>%2</message> schlug fehl"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Erste Schritte"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Material erfolgreich nach <filename>%1</filename> exportiert"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Leer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Materialien mit Druckern synchronisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Hersteller"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Materialien mit Druckern synchronisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor des Profils"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "Mit ein paar einfachen Schritten können Sie alle Ihre Materialprofile mit Ihren Druckern synchronisieren."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Druckername"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Start"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Bitte weisen Sie Ihrem Drucker einen Namen zu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "Warum muss ich Materialprofile synchronisieren?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Einen Drucker hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Anmelden"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Einen vernetzten Drucker hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Um die Materialprofile automatisch mit all Ihren mit Digital Factory verbundenen Druckern zu synchronisieren, müssen Sie in Cura angemeldet sein."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Einen unvernetzten Drucker hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Materialien über USB snchronisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Kein Drucker in Ihrem Netzwerk gefunden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "Die folgenden Drucker erhalten die neuen Materialprofile:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Aktualisieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "Beim Senden der Materialien an die Drucker ist ein Fehler aufgetreten."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Drucker nach IP hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "Materialprofile wurden erfolgreich mit den folgenden Druckern synchronisiert:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Ein Cloud-Drucker hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Störungen beheben"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "Fehlen Drucker?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Helfen Sie uns, Ultimaker Cura zu verbessern"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Vergewissern Sie sich, dass alle Ihre Drucker eingeschaltet und mit Digital Factory verbunden sind."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Liste aktualisieren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Erneut versuchen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Fertig"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura erfasst anonyme Daten, um die Druckqualität und Benutzererfahrung zu steigern. Dazu gehören:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Synchronisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Gerätetypen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "Synchronisierung"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Materialverbrauch"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "Keine Drucker gefunden"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Anzahl der Slices"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Es scheint, als ob Sie keine kompatiblen Drucker mit Digital Factory verbunden haben. Stellen Sie sicher, dass Ihr Drucker verbunden ist und die neueste Firmware ausgeführt wird."
+msgid "Print settings"
+msgstr "Druckeinstellungen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Erfahren Sie, wie Sie Ihren Drucker mit Digital Factory verbinden"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Die von Ultimaker Cura erfassten Daten enthalten keine personenbezogenen Daten."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Aktualisieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Mehr Informationen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Synchronisieren von Materialprofilen über USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Objektliste"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Führen Sie die folgenden Schritte aus, um die neuen Materialprofile in Ihren Drucker zu laden."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "Wird als Stückstruktur gedruckt."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Klicken Sie auf die Schaltfläche Materialarchiv exportieren."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "Andere Modelle, die sich mit diesem Modell überschneiden, werden angepasst."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "Speichern Sie die .umm-Datei auf einem USB-Stick."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "Überlappende Füllung wird bei diesem Modell angepasst."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "Stecken Sie den USB-Stick in Ihren Drucker und starten Sie das Verfahren zum Laden neuer Materialprofile."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "Überlappungen mit diesem Modell werden nicht unterstützt."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Wie lade ich neue Materialprofile in meinen Drucker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Überschreibt %1-Einstellung."
+msgstr[1] "Überschreibt %1-Einstellungen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Materialarchiv exportieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Verbundene Drucker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Alle Materialien exportieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Voreingestellte Drucker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Sichtbarkeit einstellen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "Der Cloud-Drucker ist offline. Bitte prüfen Sie, ob der Drucker eingeschaltet und mit dem Internet verbunden ist."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Alle prüfen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Der Drucker ist nicht mit Ihrem Konto verbunden. Bitte besuchen Sie die Ultimaker Digital Factory, um eine Verbindung herzustellen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Drucker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "Die Cloud-Verbindung ist aktuell nicht verfügbar. Bitte melden Sie sich an, um sich mit dem Cloud-Drucker zu verbinden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Berechnet"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "Die Cloud-Verbindung ist aktuell nicht verfügbar. Bitte überprüfen Sie ihre Internetverbindung."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Einstellung"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Drucker hinzufügen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Drucker verwalten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Aktuell"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Einheit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Unbenannt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Nicht mit einem Drucker verbunden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "Drucker nimmt keine Befehle an"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "In Wartung. Den Drucker überprüfen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Verbindung zum Drucker wurde unterbrochen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Es wird gedruckt..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Pausiert"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Vorbereitung läuft..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Bitte den Ausdruck entfernen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Drucken abbrechen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Soll das Drucken wirklich abgebrochen werden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Ausgewähltes Modell drucken mit %1"
-msgstr[1] "Ausgewählte Modelle drucken mit %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "Meine Drucker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Überwachen Sie Drucker in der Ultimaker Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Erstellen Sie Druckprojekte in der digitalen Bibliothek."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Druckaufträge"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Überwachen Sie Druckaufträge und drucken Sie sie aus Ihrem Druckprotokoll nach."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Erweitern Sie Ultimaker Cura durch Plugins und Materialprofile."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Werden Sie ein 3D-Druck-Experte mittels des E-Learning von Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Ultimaker Kundendienst"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Einige ausgeblendete Einstellungen verwenden Werte, die von ihren normalen, berechneten Werten abweichen.\n"
+"\n"
+"Klicken Sie, um diese Einstellungen sichtbar zu machen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Erfahren Sie, wie Sie mit Ultimaker Cura Ihre Arbeit beginnen können."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Einstellungen durchsuchen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Eine Frage stellen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Werte für alle Extruder kopieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Wenden Sie sich an die Ultimaker Community."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Alle geänderten Werte für alle Extruder kopieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Einen Fehler melden"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Diese Einstellung ausblenden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Lassen Sie es die Entwickler wissen, falls etwas schief läuft."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Diese Einstellung ausblenden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Besuchen Sie die Ultimaker-Website."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Diese Einstellung weiterhin anzeigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Druckersteuerung"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Sichtbarkeit einstellen wird konfiguriert..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Tippposition"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Diese Einstellung wird nicht verwendet, weil alle hierdurch beeinflussten Einstellungen aufgehoben werden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Hat Einfluss auf"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Wird beeinflusst von"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Tippdistanz"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Diese Einstellung wird stets zwischen allen Extrudern geteilt. Eine Änderung ändert den Wert für alle Extruder."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "G-Code senden"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Einen benutzerdefinierten G-Code-Befehl an den verbundenen Drucker senden. „Eingabe“ drücken, um den Befehl zu senden."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Diese Einstellung wird durch gegensätzliche, extruderspezifische Werte gelöst:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Extruder"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Die Zieltemperatur des Hotend. Das Hotend wird auf diese Temperatur aufgeheizt oder abgekühlt. Wenn der Wert 0 beträgt, wird die Hotend-Heizung ausgeschaltet."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Die aktuelle Temperatur dieses Hotends."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "Die Temperatur, auf die das Hotend vorgeheizt wird."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Abbrechen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Vorheizen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Heizen Sie das Hotend vor Druckbeginn auf. Sie können Ihren Druck während des Aufheizens weiter anpassen und müssen nicht warten, bis das Hotend aufgeheizt ist, wenn Sie druckbereit sind."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Die Farbe des Materials in diesem Extruder."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Das Material in diesem Extruder."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "Die in diesem Extruder eingesetzte Düse."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "Der Drucker ist nicht verbunden."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Diese Einstellung hat einen vom Profil abweichenden Wert.\n"
+"\n"
+"Klicken Sie, um den Wert des Profils wiederherzustellen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Druckbett"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "Die Zieltemperatur des heizbaren Betts. Das Bett wird auf diese Temperatur aufgeheizt oder abgekühlt. Wenn der Wert 0 beträgt, wird die Bettheizung ausgeschaltet."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "Die aktuelle Temperatur des beheizten Betts."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "Die Temperatur, auf die das Bett vorgeheizt wird."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Heizen Sie das Bett vor Druckbeginn auf. Sie können Ihren Druck während des Aufheizens weiter anpassen und müssen nicht warten, bis das Bett aufgeheizt ist, wenn Sie druckbereit sind."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Anmelden"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Materialprofile und Plug-ins aus dem Marketplace hinzufügen\n"
-"- Materialprofile und Plug-ins sichern und synchronisieren\n"
-"- Ideenaustausch mit und Hilfe von mehr als 48.000 Benutzern in der Ultimaker Community"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Kostenloses Ultimaker-Konto erstellen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Letztes Update: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker‑Konto"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Abmelden"
+"Diese Einstellung wird normalerweise berechnet; aktuell ist jedoch ein Absolutwert eingestellt.\n"
+"\n"
+"Klicken Sie, um den berechneten Wert wiederherzustellen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Überprüfung läuft ..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Konto wurde synchronisiert"
+msgid "Active print"
+msgstr "Aktiver Druck"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Irgendetwas ist schief gelaufen ..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Ausstehende Updates installieren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Nach Updates für das Konto suchen"
+msgid "Job Name"
+msgstr "Name des Auftrags"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Unbenannt"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Druckzeit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "Keine auswählbaren Einträge"
+msgid "Estimated time left"
+msgstr "Geschätzte verbleibende Zeit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Online-Fehlerbehebung anzeigen"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Umschalten auf Vollbild-Modus"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Vollbildmodus beenden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Rückgängig machen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Wiederholen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Beenden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "3D-Ansicht"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Vorderansicht"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Draufsicht"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Ansicht von unten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Ansicht von links"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Ansicht von rechts"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Cura konfigurieren..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Drucker hinzufügen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Dr&ucker verwalten..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Materialien werden verwaltet..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Weiteres Material aus Marketplace hinzufügen"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Profil mit aktuellen Einstellungen/Überschreibungen aktualisieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Aktuelle Änderungen verwerfen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "P&rofil von aktuellen Einstellungen/Überschreibungen erstellen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Profile verwalten..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Online-&Dokumentation anzeigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "&Fehler melden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Neuheiten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Über..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Ausgewählte löschen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Ausgewählte zentrieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Ausgewählte vervielfachen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Modell löschen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Modell auf Druckplatte ze&ntrieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "Modelle &gruppieren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Gruppierung für Modelle aufheben"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "Modelle &zusammenführen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "Modell &multiplizieren..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Alle Modelle wählen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Druckplatte reinigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Alle Modelle neu laden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Alle Modelle an allen Druckplatten anordnen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Alle Modelle anordnen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Anordnung auswählen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Alle Modellpositionen zurücksetzen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Alle Modelltransformationen zurücksetzen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Datei(en) öffnen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Neues Projekt..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Konfigurationsordner anzeigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Sichtbarkeit einstellen wird konfiguriert..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marktplatz"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Diese Einstellung wird nicht verwendet, weil alle hierdurch beeinflussten Einstellungen aufgehoben werden."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Hat Einfluss auf"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Wird beeinflusst von"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Diese Einstellung wird stets zwischen allen Extrudern geteilt. Eine Änderung ändert den Wert für alle Extruder."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Diese Einstellung wird durch gegensätzliche, extruderspezifische Werte gelöst:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Diese Einstellung hat einen vom Profil abweichenden Wert.\n"
-"\n"
-"Klicken Sie, um den Wert des Profils wiederherzustellen."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Diese Einstellung wird normalerweise berechnet; aktuell ist jedoch ein Absolutwert eingestellt.\n"
-"\n"
-"Klicken Sie, um den berechneten Wert wiederherzustellen."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Einstellungen durchsuchen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Werte für alle Extruder kopieren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Alle geänderten Werte für alle Extruder kopieren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Diese Einstellung ausblenden"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Diese Einstellung ausblenden"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Diese Einstellung weiterhin anzeigen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Einige ausgeblendete Einstellungen verwenden Werte, die von ihren normalen, berechneten Werten abweichen.\n"
-"\n"
-"Klicken Sie, um diese Einstellungen sichtbar zu machen."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Dieses Paket wird nach einem Neustart installiert."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Einstellungen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1 wird geschlossen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Möchten Sie %1 wirklich beenden?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Paket installieren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D-Ansicht"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Datei(en) öffnen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Vorderansicht"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Es wurden eine oder mehrere G-Code-Datei(en) innerhalb der von Ihnen gewählten Dateien gefunden. Sie können nur eine G-Code-Datei auf einmal öffnen. Wenn Sie eine G-Code-Datei öffnen möchten wählen Sie bitte nur eine Datei."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Draufsicht"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Drucker hinzufügen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Ansicht von links"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Neuheiten"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Ansicht von rechts"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Ermöglicht die Einstellungen pro Objekt."
+msgid "Provides a prepare stage in Cura."
+msgstr "Bietet eine Vorbereitungsstufe in Cura."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Werkzeug „Einstellungen pro Objekt“"
+msgid "Prepare Stage"
+msgstr "Vorbereitungsstufe"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Ermöglicht das Importieren von Cura-Profilen."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Ermöglicht das Exportieren von Cura-Profilen."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura-Profil-Reader"
+msgid "Cura Profile Writer"
+msgstr "Cura-Profil-Writer"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Bietet Unterstützung für das Lesen von X3D-Dateien."
+msgid "Provides support for reading model files."
+msgstr "Unterstützt das Lesen von Modelldateien."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D-Reader"
+msgid "Trimesh Reader"
+msgstr "Trimesh Reader"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Sicherung und Wiederherstellen Ihrer Konfiguration."
+msgid "Checks for firmware updates."
+msgstr "Nach Firmware-Updates suchen."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura-Backups"
+msgid "Firmware Update Checker"
+msgstr "Firmware-Update-Prüfer"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Beschreibt die Durchführung der Geräteeinstellung (z. B. Druckabmessung, Düsengröße usw.)"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Protokolliert bestimmte Ereignisse, damit diese vom Absturzbericht verwendet werden können"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Beschreibung Geräteeinstellungen"
+msgid "Sentry Logger"
+msgstr "Sentry-Protokolleinrichtung"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Erstellt ein Radierernetz, um den Druck von Stützstrukturen in bestimmten Positionen zu blockieren"
+msgid "Provides a monitor stage in Cura."
+msgstr "Bietet eine Überwachungsstufe in Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Stützstruktur-Radierer"
+msgid "Monitor Stage"
+msgstr "Überwachungsstufe"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5818,105 +5984,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Ausgabegerät-Plugin für Wechseldatenträger"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Ermöglicht Gerätemaßnahmen für die Aktualisierung der Firmware."
+msgid "Provides support for reading AMF files."
+msgstr "Ermöglicht das Lesen von AMF-Dateien."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Firmware-Aktualisierungsfunktion"
+msgid "AMF Reader"
+msgstr "AMF-Reader"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Bietet Unterstützung für den Import von Profilen der Vorgängerversionen von Cura."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Bietet Unterstützung für das Lesen von Ultimaker Format Packages."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Cura-Vorgängerprofil-Reader"
+msgid "UFP Reader"
+msgstr "UFP-Reader"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Ermöglicht das Lesen von 3MF-Dateien."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Stellt eine Verbindung zur Digitalen Bibliothek her und ermöglicht es Cura, Dateien aus der Digitalen Bibliothek zu öffnen und darin zu speichern."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF-Reader"
+msgid "Ultimaker Digital Library"
+msgstr "Digitale Bibliothek von Ultimaker"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Bietet Unterstützung für das Schreiben von Ultimaker Format Packages."
+msgid "Provides the Per Model Settings."
+msgstr "Ermöglicht die Einstellungen pro Objekt."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP-Writer"
+msgid "Per Model Settings Tool"
+msgstr "Werkzeug „Einstellungen pro Objekt“"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Protokolliert bestimmte Ereignisse, damit diese vom Absturzbericht verwendet werden können"
+msgid "Provides a machine actions for updating firmware."
+msgstr "Ermöglicht Gerätemaßnahmen für die Aktualisierung der Firmware."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentry-Protokolleinrichtung"
+msgid "Firmware Updater"
+msgstr "Firmware-Aktualisierungsfunktion"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Ermöglicht das Importieren von Profilen aus G-Code-Dateien."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Verwaltet Netzwerkverbindungen zu Ultimaker-Netzwerkdruckern."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-Code-Profil-Reader"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker-Netzwerkverbindung"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Bietet eine Vorschaustufe in Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Überprüft Modelle und Druckkonfiguration auf mögliche Probleme und erteilt Empfehlungen."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Vorschaustufe"
+msgid "Model Checker"
+msgstr "Modell-Prüfer"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Stellt die Röntgen-Ansicht bereit."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgen-Ansicht"
+msgid "Simulation View"
+msgstr "Simulationsansicht"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Stellt die Verbindung zum Slicing-Backend der CuraEngine her."
+msgid "Writes g-code to a file."
+msgstr "Schreibt G-Code in eine Datei."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine Backend"
+msgid "G-code Writer"
+msgstr "G-Code-Writer"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Ermöglicht das Lesen von AMF-Dateien."
+msgid "Provides support for writing 3MF files."
+msgstr "Bietet Unterstützung für das Schreiben von 3MF-Dateien."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF-Reader"
+msgid "3MF Writer"
+msgstr "3MF-Writer"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -5928,175 +6094,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Reader für komprimierten G-Code"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Erweiterung, die eine Nachbearbeitung von Skripten ermöglicht, die von Benutzern erstellt wurden"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Bietet Möglichkeiten, um XML-basierte Materialprofile zu lesen und zu schreiben."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Nachbearbeitung"
+msgid "Material Profiles"
+msgstr "Materialprofile"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Ermöglicht das Exportieren von Cura-Profilen."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Stellt die Verbindung zum Slicing-Backend der CuraEngine her."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura-Profil-Writer"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine Backend"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Akzeptiert den G-Code und sendet diesen an einen Drucker. Das Plugin kann auch die Firmware aktualisieren."
+msgid "Provides support for reading X3D files."
+msgstr "Bietet Unterstützung für das Lesen von X3D-Dateien."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB-Drucken"
+msgid "X3D Reader"
+msgstr "X3D-Reader"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Bietet eine Vorbereitungsstufe in Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Ermöglicht Erstellung von druckbarer Geometrie aus einer 2D-Bilddatei."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Vorbereitungsstufe"
+msgid "Image Reader"
+msgstr "Bild-Reader"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Ermöglicht das Laden und Anzeigen von G-Code-Dateien."
+msgid "Provides support for reading 3MF files."
+msgstr "Ermöglicht das Lesen von 3MF-Dateien."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-Code-Reader"
+msgid "3MF Reader"
+msgstr "3MF-Reader"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Ermöglicht Erstellung von druckbarer Geometrie aus einer 2D-Bilddatei."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Bietet Unterstützung für das Schreiben von Ultimaker Format Packages."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Bild-Reader"
+msgid "UFP Writer"
+msgstr "UFP-Writer"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Ermöglicht Maschinenabläufe für Ultimaker-Maschinen (z. B. Assistent für Bettnivellierung, Auswahl von Upgrades usw.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Bietet Unterstützung für den Import von Profilen der Vorgängerversionen von Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker-Maschinenabläufe"
+msgid "Legacy Cura Profile Reader"
+msgstr "Cura-Vorgängerprofil-Reader"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "G-Code wird in ein komprimiertes Archiv geschrieben."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Aktualisiert Konfigurationen von Cura 4.3 auf Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Writer für komprimierten G-Code"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Upgrade von Version 4.3 auf 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Nach Firmware-Updates suchen."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Aktualisiert Konfigurationen von Cura 2.1 auf Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Firmware-Update-Prüfer"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Upgrade von Version 2.1 auf 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Sendet anonymisierte Slice-Informationen. Kann in den Einstellungen deaktiviert werden."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Aktualisiert Konfigurationen von Cura 4.1 auf Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Slice-Informationen"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Upgrade von Version 4.1 auf 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Bietet Möglichkeiten, um XML-basierte Materialprofile zu lesen und zu schreiben."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Materialprofile"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Stellt eine Verbindung zur Digitalen Bibliothek her und ermöglicht es Cura, Dateien aus der Digitalen Bibliothek zu öffnen und darin zu speichern."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Upgrade der Konfigurationen von Cura 4.5 auf Cura 4.6."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Digitale Bibliothek von Ultimaker"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Upgrade von Version 4.5 auf 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Neue Cura Pakete finden, verwalten und installieren."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Aktualisiert Konfigurationen von Cura 3.3 auf Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Toolbox"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Upgrade von Version 3.3 auf 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Schreibt G-Code in eine Datei."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Upgrade der Konfigurationen von Cura 4.8 auf Cura 4.9."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-Code-Writer"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "Upgrade von Version 4.8 auf 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Ermöglicht die Simulationsansicht."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Aktualisiert Konfigurationen von Cura 2.7 auf Cura 3.0."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Simulationsansicht"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Upgrade von Version 2.7 auf 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Upgrade der Konfigurationen von Cura 4.5 auf Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Upgrade der Konfigurationen von Cura 4.4 auf Cura 4.5."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Upgrade von Version 4.5 auf 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Upgrade von Version 4.4 auf 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Aktualisiert Konfigurationen von Cura 2.5 auf Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Aktualisiert Konfigurationen von Cura 3.0 auf Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Upgrade von Version 2.5 auf 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Upgrade von Version 3.0 auf 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6108,115 +6274,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "Upgrade von Version 4.6.0 auf 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Upgrade der Konfigurationen von Cura 4.7 auf Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Aktualisiert Konfigurationen von Cura 2.6 auf Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Upgrade von Version 4.7 auf 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Upgrade von Version 2.6 auf 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Aktualisiert Konfigurationen von Cura 3.4 auf Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Aktualisiert Konfigurationen von Cura 4.2 auf Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Upgrade von Version 3.4 auf 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Upgrade von Version 4.2 auf 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Aktualisiert Konfigurationen von Cura 2.1 auf Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Aktualisiert Konfigurationen von Cura 4.0 auf Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Upgrade von Version 2.1 auf 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Upgrade von Version 4.0 auf 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Aktualisiert Konfigurationen von Cura 3.2 auf Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Aktualisiert Konfigurationen von Cura 4.6.2 auf Cura 4.7."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Upgrade von Version 3.2 auf 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Upgrade von Version 4.6.2 auf 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Upgrade der Konfigurationen von Cura 4.8 auf Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Upgrade der Konfigurationen von Cura 4.9 auf Cura 4.10."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "Upgrade von Version 4.8 auf 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "Upgrade von Version 4.9 auf 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Aktualisiert Konfigurationen von Cura 4.6.2 auf Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Aktualisiert Konfigurationen von Cura 2.2 auf Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Upgrade von Version 4.6.2 auf 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Upgrade von Version 2.2 auf 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Aktualisiert Konfigurationen von Cura 4.2 auf Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Aktualisiert Konfigurationen von Cura 3.2 auf Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Upgrade von Version 4.2 auf 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Upgrade von Version 3.2 auf 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Aktualisiert Konfigurationen von Cura 4.3 auf Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Aktualisiert Konfigurationen von Cura 2.5 auf Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Upgrade von Version 4.3 auf 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Upgrade von Version 2.5 auf 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Upgrade der Konfigurationen von Cura 4.9 auf Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Aktualisiert Konfigurationen von Cura 3.5 auf Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "Upgrade von Version 4.9 auf 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Upgrade von Version 3.5 auf 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Aktualisiert Konfigurationen von Cura 2.7 auf Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Aktualisiert Konfigurationen von Cura 3.4 auf Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Upgrade von Version 2.7 auf 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Upgrade von Version 3.4 auf 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Aktualisiert Konfigurationen von Cura 2.6 auf Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Upgrade der Konfigurationen von Cura 4.7 auf Cura 4.8."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Upgrade von Version 2.6 auf 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Upgrade von Version 4.7 auf 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6228,105 +6394,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "Upgrade von Version 4.11 auf 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Aktualisiert Konfigurationen von Cura 3.3 auf Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Sicherung und Wiederherstellen Ihrer Konfiguration."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Upgrade von Version 3.3 auf 3.4"
+msgid "Cura Backups"
+msgstr "Cura-Backups"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Aktualisiert Konfigurationen von Cura 3.0 auf Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Ermöglicht das Importieren von Cura-Profilen."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Upgrade von Version 3.0 auf 3.1"
+msgid "Cura Profile Reader"
+msgstr "Cura-Profil-Reader"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Aktualisiert Konfigurationen von Cura 4.0 auf Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Sendet anonymisierte Slice-Informationen. Kann in den Einstellungen deaktiviert werden."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Upgrade von Version 4.0 auf 4.1"
+msgid "Slice info"
+msgstr "Slice-Informationen"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Upgrade der Konfigurationen von Cura 4.4 auf Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Ermöglicht das Importieren von Profilen aus G-Code-Dateien."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Upgrade von Version 4.4 auf 4.5"
+msgid "G-code Profile Reader"
+msgstr "G-Code-Profil-Reader"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Aktualisiert Konfigurationen von Cura 2.2 auf Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "G-Code wird in ein komprimiertes Archiv geschrieben."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Upgrade von Version 2.2 auf 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Writer für komprimierten G-Code"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Aktualisiert Konfigurationen von Cura 4.1 auf Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Erweiterung, die eine Nachbearbeitung von Skripten ermöglicht, die von Benutzern erstellt wurden"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Upgrade von Version 4.1 auf 4.2"
+msgid "Post Processing"
+msgstr "Nachbearbeitung"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Aktualisiert Konfigurationen von Cura 3.5 auf Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Erstellt ein Radierernetz, um den Druck von Stützstrukturen in bestimmten Positionen zu blockieren"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Upgrade von Version 3.5 auf 4.0"
+msgid "Support Eraser"
+msgstr "Stützstruktur-Radierer"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Verwaltet Netzwerkverbindungen zu Ultimaker-Netzwerkdruckern."
+msgid "Provides a preview stage in Cura."
+msgstr "Bietet eine Vorschaustufe in Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker-Netzwerkverbindung"
+msgid "Preview Stage"
+msgstr "Vorschaustufe"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Unterstützt das Lesen von Modelldateien."
+msgid "Provides the X-Ray view."
+msgstr "Stellt die Röntgen-Ansicht bereit."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh Reader"
+msgid "X-Ray View"
+msgstr "Röntgen-Ansicht"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Bietet Unterstützung für das Lesen von Ultimaker Format Packages."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Ermöglicht Maschinenabläufe für Ultimaker-Maschinen (z. B. Assistent für Bettnivellierung, Auswahl von Upgrades usw.)"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP-Reader"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker-Maschinenabläufe"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6338,35 +6514,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Solide Ansicht"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Bietet Unterstützung für das Schreiben von 3MF-Dateien."
+msgid "Allows loading and displaying G-code files."
+msgstr "Ermöglicht das Laden und Anzeigen von G-Code-Dateien."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF-Writer"
+msgid "G-code Reader"
+msgstr "G-Code-Reader"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Bietet eine Überwachungsstufe in Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Beschreibt die Durchführung der Geräteeinstellung (z. B. Druckabmessung, Düsengröße usw.)"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Überwachungsstufe"
+msgid "Machine Settings Action"
+msgstr "Beschreibung Geräteeinstellungen"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Überprüft Modelle und Druckkonfiguration auf mögliche Probleme und erteilt Empfehlungen."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Akzeptiert den G-Code und sendet diesen an einen Drucker. Das Plugin kann auch die Firmware aktualisieren."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Modell-Prüfer"
+msgid "USB printing"
+msgstr "USB-Drucken"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Materialien synchronisieren"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "Sie müssen das Programm beenden und neu starten {}, bevor Änderungen wirksam werden."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "Synchronisierung läuft ..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Von Ihrem Ultimaker-Konto erkannte Änderungen"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "Möchten Sie Material- und Softwarepakete mit Ihrem Konto synchronisieren?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Synchronisieren"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Ablehnen und vom Konto entfernen"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "{} Plugins konnten nicht heruntergeladen werden"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Plugin für Lizenzvereinbarung"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Bild konvertieren..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "Die Breite der Druckplatte in Millimetern."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Marktplatz"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "Cura muss neu gestartet werden, um die Änderungen der Pakete zu übernehmen."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Installieren"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Installiert"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Premium"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Zum Web Marketplace gehen"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Materialien suchen"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Kompatibilität"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Gerät"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Druckbett"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Support"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Qualität"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Technisches Datenblatt"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Sicherheitsdatenblatt"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Druckrichtlinien"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Website"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "<a href=‘%1‘>Anmeldung</a> für Installation oder Update erforderlich"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href=‘%1‘>Materialspulen kaufen</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Aktualisierung"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Aktualisierung wird durchgeführt"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Aktualisiert"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Zurück"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Plugins"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Installiert"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Installiert nach Neustart"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "<a href=‘%1‘>Anmeldung</a> für Update erforderlich"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Downgraden"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Deinstallieren"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Community-Beiträge"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Community-Plugins"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Generische Materialien"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Pakete werden abgeholt..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Website"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "E-Mail"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Bitte melden Sie sich an, um verifizierte Plugins und Materialien für Ultimaker Cura Enterprise zu erhalten"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Version"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Zuletzt aktualisiert"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Downloads"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Installierte Plugins"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "Es wurde kein Plugin installiert."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Installierte Materialien"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "Es wurde kein Material installiert."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Gebündelte Plugins"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Gebündelte Materialien"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Verbindung zur Cura Paket-Datenbank konnte nicht hergestellt werden. Bitte überprüfen Sie Ihre Verbindung."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "Sie müssen die Lizenz akzeptieren, um das Paket zu installieren"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Änderungen in deinem Konto"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Verwerfen"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "Die folgenden Pakete werden hinzugefügt:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "Die folgenden Pakete können nicht hinzugefügt werden, weil die Cura-Version nicht kompatibel ist:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Deinstallieren bestätigen"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Sie sind dabei, Materialien und/oder Profile zu deinstallieren, die noch verwendet werden. Durch Bestätigen werden die folgenden Materialien/Profile auf ihre Standardeinstellungen zurückgesetzt."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Materialien"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Profile"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Bestätigen"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Einige Punkte bei diesem Druck könnten problematisch sein. Klicken Sie, um Tipps für die Anpassung zu erhalten."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Support-Bibliothek für die Handhabung von ebenen Objekten"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "Sie haben einige Profileinstellungen personalisiert.\n"
+#~ "Möchten Sie diese geänderten Einstellungen nach einem Profilwechsel beibehalten?\n"
+#~ "Sie können die Änderungen auch verwerfen, um die Standardeinstellungen von '%1' zu laden."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "&Druckplatte"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Erstellen"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Duplizieren"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Drucker: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Profil mit aktuellen Einstellungen/Überschreibungen aktualisieren"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Thema:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Die Anwendung muss neu gestartet werden, um die Änderungen zu übernehmen."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Mehr Informationen"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Erstellen"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Mit Druckern synchronisieren"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Drucker"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Einheit"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Online-Fehlerbehebung anzeigen"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Weiteres Material aus Marketplace hinzufügen"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Alle Modelle an allen Druckplatten anordnen"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Marktplatz"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Neue Cura Pakete finden, verwalten und installieren."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Toolbox"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Ermöglicht die Simulationsansicht."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
@@ -7225,8 +7759,7 @@ msgstr "Modell-Prüfer"
 #~ "\n"
 #~ "Select your printer from the list below:"
 #~ msgstr ""
-#~ "Um über das Netzwerk direkt auf Ihrem Drucker zu drucken, stellen Sie bitte sicher, dass der Drucker mit dem Netzwerkkabel verbunden ist oder verbinden Sie Ihren Drucker mit Ihrem WLAN-Netzwerk. Wenn Sie Cura nicht mit Ihrem Drucker verbinden, können Sie dennoch ein USB-Laufwerk für die Übertragung "
-#~ "von G-Code-Dateien auf Ihren Drucker verwenden.\n"
+#~ "Um über das Netzwerk direkt auf Ihrem Drucker zu drucken, stellen Sie bitte sicher, dass der Drucker mit dem Netzwerkkabel verbunden ist oder verbinden Sie Ihren Drucker mit Ihrem WLAN-Netzwerk. Wenn Sie Cura nicht mit Ihrem Drucker verbinden, können Sie dennoch ein USB-Laufwerk für die Übertragung von G-Code-Dateien auf Ihren Drucker verwenden.\n"
 #~ "\n"
 #~ "Wählen Sie Ihren Drucker aus der folgenden Liste:"
 
diff --git a/resources/i18n/de_DE/fdmextruder.def.json.po b/resources/i18n/de_DE/fdmextruder.def.json.po
index 76cc994c6c..e8f3bc0c92 100644
--- a/resources/i18n/de_DE/fdmextruder.def.json.po
+++ b/resources/i18n/de_DE/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:15+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: German\n"
diff --git a/resources/i18n/de_DE/fdmprinter.def.json.po b/resources/i18n/de_DE/fdmprinter.def.json.po
index 25ee8fcf09..deb12a31b2 100644
--- a/resources/i18n/de_DE/fdmprinter.def.json.po
+++ b/resources/i18n/de_DE/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:16+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: German <info@lionbridge.com>, German <info@bothof.nl>\n"
@@ -466,8 +466,8 @@ msgstr "Gerätekopf und Lüfter Polygon"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "Eine 2D-Shilhouette des Druckkopfes (mit Lüfterkappen)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -740,6 +740,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "Der Durchmesser des Rades für den Transport des Materials in den Feeder."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Qualität"
@@ -960,6 +970,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Die Anzahl der Wände. Wenn diese anhand der Wanddicke berechnet wird, wird der Wert auf eine ganze Zahl auf- oder abgerundet."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Wipe-Abstand der Außenwand"
@@ -990,14 +1050,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Optimieren Sie die Reihenfolge, in der die Wände gedruckt werden, um die Anzahl der Einzüge und die zurückgelegten Distanzen zu reduzieren. Dieser Schritt bringt für die meisten Teile Vorteile, allerdings werden einige möglicherweise länger benötigen. Vergleichen Sie deshalb bitte die Schätzung der Druckzeiten mit und ohne Optimierung. Bei Wahl eines Brims als Druckplattenhaftungstyp ist die erste Schicht nicht optimiert."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Außenwände vor Innenwänden"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Druckt Wände bei Aktivierung von außen nach innen. Dies kann die Maßgenauigkeit in X und Y erhöhen, wenn hochviskose Kunststoffe wie ABS verwendet werden; allerdings kann es die Druckqualität der Außenfläche vermindern, insbesondere bei Überhängen."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1010,94 +1080,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Es wird eine Zusatzwand für jede zweite Schicht gedruckt. Auf diese Weise gelangt Füllung zwischen diese Zusatzwände, was zu stärkeren Drucken führt."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Wandüberlappungen ausgleichen"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Der Fluss für Teile einer Wand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Außenwandüberlappungen ausgleichen"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Der Fluss für Teile einer Außenwand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Innenwandüberlappungen ausgleichen"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Der Fluss für Teile einer Innenwand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Mindestwandfluss"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Minimal zulässiger Fluss als Prozentwert für eine Wandlinie. Die Wand-Überlappungskompensation reduziert den Fluss einer Wand, wenn sie nah an einer vorhandenen Wand liegt. Wände, deren Fluss unter diesem Wert liegt, werden durch eine Fahrbewegung ersetzt. Bei Verwendung dieser Einstellung müssen Sie die Wand-Überlappungskompensation aktivieren und die Außenwand vor den Innenwänden drucken."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Einziehen bevorzugt"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Bei Aktivierung wird der Einzug anstelle des Combings für zurückzulegende Wege verwendet, die Wände ersetzen, deren Fluss unter der mindestens erforderlichen Flussschwelle liegt."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Lücken zwischen Wänden füllen"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Füllt die Lücken zwischen den Wänden, wo keine Wand passt."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Nirgends"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Drucken von dünnen Wänden"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Überall"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Drucken Sie Teile des Modells, die horizontal dünner als die Düsengröße sind."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Kleine Lücken ausfiltern"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Kleine Lücken ausfiltern, um Tropfen an der Außenseite des Modells zu reduzieren."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Drucken von dünnen Wänden"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Drucken Sie Teile des Modells, die horizontal dünner als die Düsengröße sind."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2199,6 +2259,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Um die Schrumpfung des Materials beim Abkühlen zu kompensieren, wird das Modell mit diesem Faktor skaliert."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Kristallines Material"
@@ -2709,24 +2789,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "Die ersten Schichten werden langsamer als der Rest des Modells gedruckt, damit sie besser am Druckbett haften und um die Wahrscheinlichkeit eines erfolgreichen Drucks zu erhöhen. Die Geschwindigkeit wird während des Druckens dieser Schichten schrittweise erhöht."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Ausgleich des Filamentflusses"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Drucken Sie dünnere Linien schneller als normale Linien, so dass die Menge des extrudierten Materials pro Sekunde gleich bleibt. Dünne Teile in Ihrem Modell erfordern möglicherweise einen Liniendruck mit geringerer Linienbreite als in den Einstellungen vorgesehen. Diese Einstellung steuert die Geschwindigkeitsänderungen für diese Linien."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Maximale Geschwindigkeit für Flussausgleich"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Maximale Druckgeschwindigkeit bei der Justierung der Druckgeschwindigkeit zum Ausgleich des Flusses."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4464,6 +4534,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "Das für das Drucken von Skirt/Brim/Raft verwendete Extruder-Element. Diese wird für die Mehrfach-Extrusion benutzt."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Anzahl der Skirt-Linien"
@@ -4628,6 +4738,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "Der Abstand zwischen den Raft-Linien der Raft-Oberflächenschichten. Der Abstand sollte der Linienbreite entsprechen, damit die Oberfläche stabil ist."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Dicke der Raft-Mittelbereichs"
@@ -5128,6 +5248,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "Die maximal zulässige Abweichung bei Reduzierung der maximalen Auflösung. Wenn Sie diesen Wert erhöhen, wird der Druck ungenauer, der G-Code wird jedoch kleiner. Die maximale Abweichung ist eine Grenze für die maximale Auflösung. Wenn die beiden Werte sich widersprechen, wird stets die maximale Abweichung eingehalten."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Sonderfunktionen"
@@ -6422,6 +6552,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "Bei kleinen Details wird die Geschwindigkeit bei der ersten Schicht auf diesen Prozentsatz der normalen Druckgeschwindigkeit gesetzt. Durch eine niedrigere Druckgeschwindigkeit können die Haftung und die Genauigkeit verbessert werden."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Einstellungen Befehlszeile"
@@ -6481,6 +6641,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Transformationsmatrix, die beim Laden aus der Datei auf das Modell angewandt wird."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "Eine 2D-Shilhouette des Druckkopfes (mit Lüfterkappen)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Außenwände vor Innenwänden"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Druckt Wände bei Aktivierung von außen nach innen. Dies kann die Maßgenauigkeit in X und Y erhöhen, wenn hochviskose Kunststoffe wie ABS verwendet werden; allerdings kann es die Druckqualität der Außenfläche vermindern, insbesondere bei Überhängen."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Wandüberlappungen ausgleichen"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Der Fluss für Teile einer Wand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Außenwandüberlappungen ausgleichen"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Der Fluss für Teile einer Außenwand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Innenwandüberlappungen ausgleichen"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Der Fluss für Teile einer Innenwand wird ausgeglichen, die dort gedruckt werden, wo sich bereits eine Wand befindet."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Mindestwandfluss"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Minimal zulässiger Fluss als Prozentwert für eine Wandlinie. Die Wand-Überlappungskompensation reduziert den Fluss einer Wand, wenn sie nah an einer vorhandenen Wand liegt. Wände, deren Fluss unter diesem Wert liegt, werden durch eine Fahrbewegung ersetzt. Bei Verwendung dieser Einstellung müssen Sie die Wand-Überlappungskompensation aktivieren und die Außenwand vor den Innenwänden drucken."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Einziehen bevorzugt"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Bei Aktivierung wird der Einzug anstelle des Combings für zurückzulegende Wege verwendet, die Wände ersetzen, deren Fluss unter der mindestens erforderlichen Flussschwelle liegt."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Lücken zwischen Wänden füllen"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Füllt die Lücken zwischen den Wänden, wo keine Wand passt."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Nirgends"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Überall"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Kleine Lücken ausfiltern"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Kleine Lücken ausfiltern, um Tropfen an der Außenseite des Modells zu reduzieren."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Ausgleich des Filamentflusses"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Drucken Sie dünnere Linien schneller als normale Linien, so dass die Menge des extrudierten Materials pro Sekunde gleich bleibt. Dünne Teile in Ihrem Modell erfordern möglicherweise einen Liniendruck mit geringerer Linienbreite als in den Einstellungen vorgesehen. Diese Einstellung steuert die Geschwindigkeitsänderungen für diese Linien."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Maximale Geschwindigkeit für Flussausgleich"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Maximale Druckgeschwindigkeit bei der Justierung der Druckgeschwindigkeit zum Ausgleich des Flusses."
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "G-Code-Befehle, die zu Beginn ausgeführt werden sollen – getrennt durch \\n."
diff --git a/resources/i18n/es_ES/cura.po b/resources/i18n/es_ES/cura.po
index 62ffb7e3f7..3f126e6b23 100644
--- a/resources/i18n/es_ES/cura.po
+++ b/resources/i18n/es_ES/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2021-11-08 11:48+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: \n"
@@ -17,1507 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 3.0\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "No se ha podido crear el archivo desde el directorio de datos de usuario: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Copia de seguridad"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Se ha intentado restaurar una copia de seguridad de Cura sin tener los datos o metadatos adecuados."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Se ha intentado restaurar una copia de seguridad de Cura superior a la versión actual."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "Se ha producido el siguiente error al intentar restaurar una copia de seguridad de Cura:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Sincronice los perfiles de material con sus impresoras antes de comenzar a imprimir."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Nuevos materiales instalados"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Sincronizar materiales"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "Más información"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "No se pudo guardar el archivo de material en {}:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Se ha producido un error al guardar el archivo de material"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Error desconocido."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "La altura del volumen de impresión se ha reducido debido al valor del ajuste «Secuencia de impresión» para evitar que el caballete colisione con los modelos impresos."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volumen de impresión"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "¿Seguro que desea eliminar {0}? ¡Esta acción no se puede deshacer!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "No reemplazado"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Desconocido"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Las siguientes impresoras no pueden conectarse porque forman parte de un grupo"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Impresoras en red disponibles"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Preparar"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Perfil de cura"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Perfiles personalizados"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Todos los tipos compatibles ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Todos los archivos (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visual"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "El perfil visual está diseñado para imprimir prototipos y modelos visuales con la intención de obtener una alta calidad visual y de superficies."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "El perfil de ingeniería ha sido diseñado para imprimir prototipos funcionales y piezas de uso final con la intención de obtener una mayor precisión y tolerancias más precisas."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Boceto"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "El perfil del boceto ha sido diseñado para imprimir los prototipos iniciales y la validación del concepto con la intención de reducir el tiempo de impresión de manera considerable."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Material personalizado"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Fallo de inicio de sesión"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Buscando nueva ubicación para los objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Buscando ubicación"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "No se puede encontrar una ubicación dentro del volumen de impresión para todos los objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "No se puede encontrar la ubicación"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Error al crear un archivo de materiales para sincronizarlo con las impresoras."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Error al cargar el archivo de materiales para sincronizarlo con las impresoras."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "La respuesta de Digital Factory parece estar dañada."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "A la respuesta de Digital Factory le falta información importante."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Error al conectarse con Digital Factory para sincronizar los materiales con algunas de las impresoras."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Error al conectarse con Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Cargando máquinas..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Configurando preferencias...."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Iniciando la máquina activa..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Iniciando el administrador de la máquina..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Iniciando el volumen de impresión..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Configurando escena..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Cargando interfaz..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Iniciando el motor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Solo se puede cargar un archivo GCode a la vez. Se omitió la importación de {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Advertencia"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "No se puede abrir ningún archivo si se está cargando un archivo GCode. Se omitió la importación de {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Error"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Omitir"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Cerrar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Siguiente"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Finalizar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Agregar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "N.º de grupo {group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Pared exterior"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Paredes interiores"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Forro"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Relleno"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Relleno de soporte"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Interfaz de soporte"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Soporte"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Falda"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Torre auxiliar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Desplazamiento"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Retracciones"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Otro"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "No se han podido abrir las notas de la versión."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura no puede iniciarse"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>¡Vaya! Ultimaker Cura ha encontrado un error.</p></b>\n"
-"                    <p>Hemos detectado un error irreversible durante el inicio, posiblemente como consecuencia de varios archivos de configuración erróneos. Le recomendamos que realice una copia de seguridad y que restablezca los ajustes.</p>\n"
-"                    <p>Las copias de seguridad se encuentran en la carpeta de configuración.</p>\n"
-"                    <p>Envíenos el informe de errores para que podamos solucionar el problema.</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Enviar informe de errores a Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Mostrar informe de errores detallado"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Mostrar carpeta de configuración"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Realizar copia de seguridad y restablecer configuración"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Informe del accidente"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Se ha producido un error grave en Cura. Envíenos este informe de errores para que podamos solucionar el problema.</p></b>\n"
-"            <p>Utilice el botón \"Enviar informe\" para publicar automáticamente el informe de errores en nuestros servidores.</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Información del sistema"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Desconocido"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Versión de Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Idioma de Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "Idioma del sistema operativo"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Plataforma"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Versión Qt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "Versión PyQt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Aún no se ha inicializado<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>Versión de OpenGL: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>Proveedor de OpenGL: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>Representador de OpenGL: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Rastreabilidad de errores"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Registros"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Enviar informe"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "No se puede iniciar un nuevo proceso de inicio de sesión. Compruebe si todavía está activo otro intento de inicio de sesión."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "No se puede acceder al servidor de cuentas de Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "Error de inicio de sesión"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "El estado indicado no es correcto."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Se agotó el tiempo de autenticación con el servidor de la cuenta."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Conceda los permisos necesarios al autorizar esta aplicación."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Se ha producido un problema al intentar iniciar sesión, vuelva a intentarlo."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "No se ha podido leer la respuesta."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Multiplicar y colocar objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Colocando objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Colocando objeto"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "No compatible"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Tobera"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "La configuración se ha cambiado para que coincida con los extrusores disponibles en este momento:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Ajustes actualizados"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extrusores deshabilitados"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "El archivo ya existe"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "El archivo <filename>{0}</filename> ya existe. ¿Está seguro de que desea sobrescribirlo?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "URL del archivo no válida:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Error al exportar el perfil a <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Error al exportar el perfil a <filename>{0}</filename>: Error en el complemento de escritura."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Perfil exportado a <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Exportación correcta"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Error al importar el perfil de <filename>{0}</filename>: {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "No se puede importar el perfil de <filename>{0}</filename> antes de añadir una impresora."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "No hay ningún perfil personalizado para importar en el archivo <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Error al importar el perfil de <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Este perfil <filename>{0}</filename> contiene datos incorrectos, no se han podido importar."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Error al importar el perfil de <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "Perfil {0} importado correctamente."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "El archivo {0} no contiene ningún perfil válido."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "El perfil {0} tiene un tipo de archivo desconocido o está corrupto."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Perfil personalizado"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Al perfil le falta un tipo de calidad."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Todavía no hay ninguna impresora activa."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "No se puede añadir el perfil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "El tipo de calidad '{0}' no es compatible con la definición actual de máquina activa '{1}'."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Advertencia: el perfil no es visible porque su tipo de calidad '{0}' no está disponible para la configuración actual. Cambie a una combinación de material/tobera que pueda utilizar este tipo de calidad."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Ajustes por modelo"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configurar ajustes por modelo"
+msgid "glTF Binary"
+msgstr "glTF binario"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Perfil de cura"
+msgid "glTF Embedded JSON"
+msgstr "glTF incrustado JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Archivo X3D"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Se ha producido un error al intentar restaurar su copia de seguridad."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Copias de seguridad"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Se ha producido un error al cargar su copia de seguridad."
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Creando copia de seguridad..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange comprimido"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Se ha producido un error al crear la copia de seguridad."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "No se pudo acceder a la información actualizada."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Cargando su copia de seguridad..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Puede que haya nuevas funciones o correcciones de errores disponibles para {machine_name}. Si no dispone de la última versión disponible, se recomienda actualizar el firmware de la impresora a la versión {latest_version}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Su copia de seguridad ha terminado de cargarse."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "Nuevo firmware de %s estable disponible"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "La copia de seguridad excede el tamaño máximo de archivo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Cómo actualizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Administrar copias de seguridad"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Ajustes de la máquina"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Bloqueador de soporte"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Cree un volumen que no imprima los soportes."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Unidad extraíble"
+msgid "Monitor"
+msgstr "Supervisar"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Guardar en unidad extraíble"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Guardar en unidad extraíble {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "¡No hay formatos de archivo disponibles con los que escribir!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Guardando en unidad extraíble <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Guardando"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "No se pudo guardar en <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "No se pudo encontrar un nombre de archivo al tratar de escribir en {device}."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "No se pudo guardar en unidad extraíble {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Error"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Guardado en unidad extraíble {0} como {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Archivo guardado"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Expulsar"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Expulsar dispositivo extraíble {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Expulsado {0}. Ahora puede retirar de forma segura la unidad."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Retirar de forma segura el hardware"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Error al expulsar {0}. Es posible que otro programa esté utilizando la unidad."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Actualizar firmware"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Perfiles de Cura 15.04"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "El archivo del proyecto <filename>{0}</filename> contiene un tipo de máquina desconocida <message>{1}</message>. No se puede importar la máquina, en su lugar, se importarán los modelos."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Abrir archivo de proyecto"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "El archivo de proyecto <filename>{0}</filename> está repentinamente inaccesible: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "No se puede abrir el archivo de proyecto"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "El archivo de proyecto <filename>{0}</filename> está dañado: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "El archivo de proyecto <filename>{0}</filename> se ha creado con perfiles desconocidos para esta versión de Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Archivo 3MF"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "No se puede escribir en el archivo UFP:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Paquete de formato Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Archivo GCode"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Vista previa"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Vista de rayos X"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Procesando capas"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "Información"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "Se ha producido un error inesperado al realizar el corte o slicing. Le rogamos que informe sobre este error en nuestro rastreador de problemas."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "Error en el corte"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Informar del error"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Informar de un error en el rastreador de problemas de Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "No se puede segmentar con el material actual, ya que es incompatible con el dispositivo o la configuración seleccionados."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "No se puede segmentar"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Los ajustes actuales no permiten la segmentación. Los siguientes ajustes contienen errores: {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Los ajustes de algunos modelos no permiten la segmentación. Los siguientes ajustes contienen errores en uno o más modelos: {error_labels}."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "No se puede segmentar porque la torre auxiliar o la posición o posiciones de preparación no son válidas."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "No se puede segmentar porque hay objetos asociados al extrusor %s que está deshabilitado."
+msgid "Warning"
+msgstr "Advertencia"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Revise la configuración y compruebe si sus modelos:\n"
-" - Se integran en el volumen de impresión\n"
-"- Están asignados a un extrusor activado\n"
-" - No están todos definidos como mallas modificadoras"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Unidad extraíble"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "Archivo AMF"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Archivo GCode comprimido"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Posprocesamiento"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modificar GCode"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Impresión USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Imprimir mediante USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Imprimir mediante USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Conectado mediante USB"
+msgid "Ultimaker Format Package"
+msgstr "Paquete de formato Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Se está realizando una impresión con USB, si cierra Cura detendrá la impresión. ¿Desea continuar?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Todavía hay una impresión en curso. Cura no puede iniciar otra impresión a través de USB hasta que se haya completado la impresión anterior."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Impresión en curso"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Preparar"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Analizar GCode"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Datos de GCode"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Asegúrese de que el GCode es adecuado para la impresora y para su configuración antes de enviar el archivo a la misma. Es posible que la representación del GCode no sea precisa."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Archivo G"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Imagen JPG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Imagen JPEG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Imagen PNG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Imagen BMP"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Imagen GIF"
+msgid "Per Model Settings"
+msgstr "Ajustes por modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Nivelar placa de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configurar ajustes por modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Seleccionar actualizaciones"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter no es compatible con el modo texto."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "No se pudo acceder a la información actualizada."
+msgid "Update Firmware"
+msgstr "Actualizar firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Puede que haya nuevas funciones o correcciones de errores disponibles para {machine_name}. Si no dispone de la última versión disponible, se recomienda actualizar el firmware de la impresora a la versión {latest_version}."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "Nuevo firmware de %s estable disponible"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Cómo actualizar"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "No se puede leer el archivo de datos de ejemplo."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "Tiene que salir y reiniciar {} para que los cambios surtan efecto."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Sincronizando..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Se han detectado cambios desde su cuenta de Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "¿Desea sincronizar el material y los paquetes de software con su cuenta?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Sincronizar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Rechazar y eliminar de la cuenta"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Error al descargar los complementos {}"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Rechazar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Estoy de acuerdo"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Acuerdo de licencia de complemento"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter no es compatible con el modo sin texto."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Prepare el Gcode antes de la exportación."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Cura no muestra correctamente las capas si la impresión de alambre está habilitada."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura ha detectado perfiles de material que aún no estaban instalados en la impresora host del grupo {0}."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Vista de simulación"
+msgid "Sending materials to printer"
+msgstr "Enviando materiales a la impresora"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "No se muestra nada porque primero hay que cortar."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Está intentando conectarse a {0} pero ese no es el host de un grupo. Puede visitar la página web para configurarlo como host de grupo."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "No hay capas para mostrar"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "No volver a mostrar este mensaje"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Vista de capas"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Imprimir a través de la red"
+msgid "Not a group host"
+msgstr "No es un host de grupo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Imprime a través de la red"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Configurar grupo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Conectado a través de la red"
+msgid "Sending Print Job"
+msgstr "Enviando trabajo de impresión"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "mañana"
+msgid "Uploading print job to printer."
+msgstr "Cargando el trabajo de impresión a la impresora."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "hoy"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "La cola de trabajos de impresión está llena. La impresora no puede aceptar trabajos nuevos."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Conectar a través de la red"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "Cola llena"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Espere hasta que se envíe el trabajo actual."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Error de impresión"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "El trabajo de impresión se ha enviado correctamente a la impresora."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Fecha de envío"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Está intentando conectarse a una impresora que no está ejecutando Ultimaker Connect. Actualice la impresora al firmware más reciente."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Actualice su impresora"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "La cola de trabajos de impresión está llena. La impresora no puede aceptar trabajos nuevos."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "Cola llena"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Enviando trabajo de impresión"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Cargando el trabajo de impresión a la impresora."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura ha detectado perfiles de material que aún no estaban instalados en la impresora host del grupo {0}."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Enviando materiales a la impresora"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "No se han podido cargar los datos en la impresora."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Error de red"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Está intentando conectarse a {0} pero ese no es el host de un grupo. Puede visitar la página web para configurarlo como host de grupo."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "No es un host de grupo"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Configurar grupo"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1527,66 +296,85 @@ msgstr ""
 "Su impresora <b>{printer_name} </b> podría estar conectada a través de la nube.\n"
 " Administre su cola de impresión y supervise las impresiones desde cualquier lugar conectando su impresora a Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "¿Está preparado para la impresión en la nube?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Empezar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "Más información"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Imprimir mediante cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Está intentando conectarse a una impresora que no está ejecutando Ultimaker Connect. Actualice la impresora al firmware más reciente."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Actualice su impresora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "No se han podido cargar los datos en la impresora."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Error de red"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Imprimir a través de la red"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Imprimir mediante cloud"
+msgid "Print over network"
+msgstr "Imprime a través de la red"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Conectado mediante cloud"
+msgid "Connected over the network"
+msgstr "Conectado a través de la red"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Supervisar la impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "mañana"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Haga un seguimiento de la impresión en Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "hoy"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Código de error desconocido al cargar el trabajo de impresión: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Conectar a través de la red"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Se ha detectado una nueva impresora en su cuenta de Ultimaker"
 msgstr[1] "Se han detectado nuevas impresoras en su cuenta de Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Añadiendo la impresora {name} ({model}) de su cuenta"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1594,71 +382,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... y {0} más"
 msgstr[1] "... y {0} más"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Impresoras añadidas desde Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "La conexión a la nube no está disponible para una impresora"
 msgstr[1] "La conexión a la nube no está disponible para algunas impresoras"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Esta impresora no está vinculada a Digital Factory:"
 msgstr[1] "Estas impresoras no están vinculadas a Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Para establecer una conexión, visite {website_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Mantener las configuraciones de la impresora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Eliminar impresoras"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} se eliminará hasta la próxima sincronización de la cuenta."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Para eliminar {printer_name} permanentemente, visite {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "¿Seguro que desea eliminar {printer_name} temporalmente?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "¿Eliminar impresoras?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1674,2086 +462,3131 @@ msgstr[1] ""
 "Está a punto de eliminar {0} impresoras de Cura. Esta acción no se puede deshacer.\n"
 "¿Seguro que desea continuar?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr "Está a punto de eliminar todas las impresoras de Cura. Esta acción no se puede deshacer.¿Seguro que desea continuar?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Imprimir mediante cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Imprimir mediante cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF binario"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Conectado mediante cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF incrustado JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Supervisar la impresión"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Haga un seguimiento de la impresión en Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange comprimido"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Código de error desconocido al cargar el trabajo de impresión: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Asistente del modelo 3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "Las áreas resaltadas indican que faltan superficies o son inusuales. Corrija los errores en el modelo y vuelva a abrirlo en Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Es posible que uno o más modelos 3D no se impriman correctamente debido al tamaño del modelo y la configuración del material:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Obtenga más información sobre cómo garantizar la mejor calidad y fiabilidad de impresión posible.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver guía de impresión de calidad</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Cura no muestra correctamente las capas si la impresión de alambre está habilitada."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Errores de modelo"
+msgid "Simulation View"
+msgstr "Vista de simulación"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Vista de sólidos"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "No se muestra nada porque primero hay que cortar."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "No hay capas para mostrar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "No volver a mostrar este mensaje"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Vista de capas"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter no es compatible con el modo sin texto."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Prepare el Gcode antes de la exportación."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Archivo GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Error al escribir el archivo 3MF."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "El complemento del Escritor de 3MF está dañado."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Aún no hay espacio de trabajo en el que escribir. Añada una impresora primero."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "No tiene permiso para escribir el espacio de trabajo aquí."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "El sistema operativo no permite guardar un archivo de proyecto en esta ubicación ni con este nombre de archivo."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "Archivo 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Archivo 3MF del proyecto de Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Supervisar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Archivo GCode comprimido"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "Se ha producido un error inesperado al realizar el corte o slicing. Le rogamos que informe sobre este error en nuestro rastreador de problemas."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "Error en el corte"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Informar del error"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Informar de un error en el rastreador de problemas de Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "No se puede segmentar con el material actual, ya que es incompatible con el dispositivo o la configuración seleccionados."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Asistente del modelo 3D"
+msgid "Unable to slice"
+msgstr "No se puede segmentar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Los ajustes actuales no permiten la segmentación. Los siguientes ajustes contienen errores: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Los ajustes de algunos modelos no permiten la segmentación. Los siguientes ajustes contienen errores en uno o más modelos: {error_labels}."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "No se puede segmentar porque la torre auxiliar o la posición o posiciones de preparación no son válidas."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "No se puede segmentar porque hay objetos asociados al extrusor %s que está deshabilitado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>Es posible que uno o más modelos 3D no se impriman correctamente debido al tamaño del modelo y la configuración del material:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Obtenga más información sobre cómo garantizar la mejor calidad y fiabilidad de impresión posible.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver guía de impresión de calidad</a></p>"
+"Revise la configuración y compruebe si sus modelos:\n"
+" - Se integran en el volumen de impresión\n"
+"- Están asignados a un extrusor activado\n"
+" - No están todos definidos como mallas modificadoras"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Tipo de malla"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Procesando capas"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Modelo normal"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Información"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Imprimir como soporte"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Archivo X3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Modificar los ajustes de las superposiciones"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Imagen JPG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "No es compatible con superposiciones"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Imagen JPEG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Solo malla de relleno"
+msgid "PNG Image"
+msgstr "Imagen PNG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Cortar malla"
+msgid "BMP Image"
+msgstr "Imagen BMP"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Seleccionar ajustes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Imagen GIF"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Seleccionar ajustes o personalizar este modelo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Tobera"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtrar..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "El archivo del proyecto <filename>{0}</filename> contiene un tipo de máquina desconocida <message>{1}</message>. No se puede importar la máquina, en su lugar, se importarán los modelos."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Mostrar todo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Abrir archivo de proyecto"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Copias de seguridad de Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "El archivo de proyecto <filename>{0}</filename> está repentinamente inaccesible: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Versión de Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "No se puede abrir el archivo de proyecto"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Máquinas"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "El archivo de proyecto <filename>{0}</filename> está dañado: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiales"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "El archivo de proyecto <filename>{0}</filename> se ha creado con perfiles desconocidos para esta versión de Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Perfiles"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Recomendado"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Complementos"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "¿Desea obtener más información?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "Archivo 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Realizar copia de seguridad ahora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "No se puede escribir en el archivo UFP:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Copia de seguridad automática"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Perfiles de Cura 15.04"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Crea una copia de seguridad de forma automática cada día que inicia Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Copias de seguridad"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Restaurar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Se ha producido un error al cargar su copia de seguridad."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Eliminar copia de seguridad"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Creando copia de seguridad..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "¿Seguro que desea eliminar esta copia de seguridad? Esta acción no se puede deshacer."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Se ha producido un error al crear la copia de seguridad."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Restaurar copia de seguridad"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Cargando su copia de seguridad..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Deberá reiniciar Cura para restaurar su copia de seguridad. ¿Desea cerrar Cura ahora?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Su copia de seguridad ha terminado de cargarse."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Realice una copia de seguridad y sincronice sus ajustes de Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "La copia de seguridad excede el tamaño máximo de archivo."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Iniciar sesión"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Administrar copias de seguridad"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Mis copias de seguridad"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Copia de seguridad"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Actualmente no posee ninguna copia de seguridad. Utilice el botón de Realizar copia de seguridad ahora para crear una."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Se ha producido un error al intentar restaurar su copia de seguridad."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Durante la fase de vista previa, solo se mostrarán 5 copias de seguridad. Elimine una copia de seguridad para ver copias de seguridad antiguas."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "No se puede leer el archivo de datos de ejemplo."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Ajustes de la impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter no es compatible con el modo texto."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (anchura)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Posprocesamiento"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modificar GCode"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (profundidad)"
+msgid "Support Blocker"
+msgstr "Bloqueador de soporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (altura)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Cree un volumen que no imprima los soportes."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forma de la placa de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Vista previa"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origen en el centro"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Vista de rayos X"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Plataforma calentada"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Nivelar placa de impresión"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volumen de impresión calentado"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Seleccionar actualizaciones"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Tipo de GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Ajustes del cabezal de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X mín"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y mín"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X máx"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y máx"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Altura del puente"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Número de extrusores"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Aplicar compensaciones del extrusor a GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "Las áreas resaltadas indican que faltan superficies o son inusuales. Corrija los errores en el modelo y vuelva a abrirlo en Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Iniciar GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Errores de modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Finalizar GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "Más información"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Ajustes de la tobera"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Vista de sólidos"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Tamaño de la tobera"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Analizar GCode"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diámetro del material compatible"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Datos de GCode"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Desplazamiento de la tobera sobre el eje X"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Asegúrese de que el GCode es adecuado para la impresora y para su configuración antes de enviar el archivo a la misma. Es posible que la representación del GCode no sea precisa."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Desplazamiento de la tobera sobre el eje Y"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Archivo G"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Número de ventilador de enfriamiento"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Ajustes de la máquina"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "GCode inicial del extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Impresión USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "GCode final del extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Imprimir mediante USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Imprimir mediante USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Actualizar firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Conectado mediante USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "El firmware es la parte del software que se ejecuta directamente en la impresora 3D. Este firmware controla los motores de pasos, regula la temperatura y, finalmente, hace que funcione la impresora."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Se está realizando una impresión con USB, si cierra Cura detendrá la impresión. ¿Desea continuar?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Todavía hay una impresión en curso. Cura no puede iniciar otra impresión a través de USB hasta que se haya completado la impresión anterior."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Impresión en curso"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Cargando máquinas..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Configurando preferencias...."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Iniciando la máquina activa..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Iniciando el administrador de la máquina..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Iniciando el volumen de impresión..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Configurando escena..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Cargando interfaz..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Iniciando el motor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Solo se puede cargar un archivo GCode a la vez. Se omitió la importación de {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "No se puede abrir ningún archivo si se está cargando un archivo GCode. Se omitió la importación de {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "El firmware que se envía con las nuevas impresoras funciona, pero las nuevas versiones suelen tener más funciones y mejoras."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Actualización de firmware automática"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visual"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Cargar firmware personalizado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "El perfil visual está diseñado para imprimir prototipos y modelos visuales con la intención de obtener una alta calidad visual y de superficies."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "No se puede actualizar el firmware porque no hay conexión con la impresora."
+msgid "Engineering"
+msgstr "Engineering"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "El perfil de ingeniería ha sido diseñado para imprimir prototipos funcionales y piezas de uso final con la intención de obtener una mayor precisión y tolerancias más precisas."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "No se puede actualizar el firmware porque la conexión con la impresora no permite actualizaciones de firmware."
+msgid "Draft"
+msgstr "Boceto"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Seleccionar firmware personalizado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "El perfil del boceto ha sido diseñado para imprimir los prototipos iniciales y la validación del concepto con la intención de reducir el tiempo de impresión de manera considerable."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Actualización del firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "No reemplazado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "¿Seguro que desea eliminar {0}? ¡Esta acción no se puede deshacer!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Actualización del firmware."
+msgid "Unknown"
+msgstr "Desconocido"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Actualización del firmware completada."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Las siguientes impresoras no pueden conectarse porque forman parte de un grupo"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Se ha producido un error al actualizar el firmware debido a un error desconocido."
+msgid "Available networked printers"
+msgstr "Impresoras en red disponibles"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calculado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Sincronice los perfiles de material con sus impresoras antes de comenzar a imprimir."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Nuevos materiales instalados"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Se ha producido un error al actualizar el firmware debido a un error de comunicación."
+msgid "Custom Material"
+msgstr "Material personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Se ha producido un error al actualizar el firmware debido a un error de entrada/salida."
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Se ha producido un error al actualizar el firmware porque falta el firmware."
+msgid "Custom profiles"
+msgstr "Perfiles personalizados"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Abrir proyecto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Todos los tipos compatibles ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Actualizar existente"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Todos los archivos (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Crear nuevo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Error al crear un archivo de materiales para sincronizarlo con las impresoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Resumen: proyecto de Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Error al cargar el archivo de materiales para sincronizarlo con las impresoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Ajustes de la impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "La respuesta de Digital Factory parece estar dañada."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "¿Cómo debería solucionarse el conflicto en la máquina?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "A la respuesta de Digital Factory le falta información importante."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tipo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Error al conectarse con Digital Factory para sincronizar los materiales con algunas de las impresoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Grupo de impresoras"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Error al conectarse con Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Ajustes del perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "No se ha podido crear el archivo desde el directorio de datos de usuario: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "¿Cómo debería solucionarse el conflicto en el perfil?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Se ha intentado restaurar una copia de seguridad de Cura sin tener los datos o metadatos adecuados."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nombre"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Se ha intentado restaurar una copia de seguridad de Cura superior a la versión actual."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "Se ha producido el siguiente error al intentar restaurar una copia de seguridad de Cura:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "No está en el perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Buscando nueva ubicación para los objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 sobrescrito"
-msgstr[1] "%1 sobrescritos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Buscando ubicación"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivado de"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "No se puede encontrar una ubicación dentro del volumen de impresión para todos los objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 sobrescrito"
-msgstr[1] "%1, %2 sobrescritos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "No se puede encontrar la ubicación"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Ajustes del material"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Fallo de inicio de sesión"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "¿Cómo debería solucionarse el conflicto en el material?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Pared exterior"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Visibilidad de los ajustes"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Paredes interiores"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Forro"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Ajustes visibles:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Relleno"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 de un total de %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Relleno de soporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Si carga un proyecto, se borrarán todos los modelos de la placa de impresión."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Interfaz de soporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Abrir"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Soporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Complemento de posprocesamiento"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Falda"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Secuencias de comandos de posprocesamiento"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Torre auxiliar"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Añadir secuencia de comando"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Desplazamiento"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Retracciones"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Otro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Ajustes"
+msgid "Group #{group_nr}"
+msgstr "N.º de grupo {group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Cambiar las secuencias de comandos de posprocesamiento."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "No se han podido abrir las notas de la versión."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "La siguiente secuencia de comandos está activa:"
-msgstr[1] "Las siguientes secuencias de comandos están activas:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Omitir"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Convertir imagen..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Cerrar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "La distancia máxima de cada píxel desde la \"Base\"."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Agregar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Altura (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Finalizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "La altura de la base desde la placa de impresión en milímetros."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Cancelar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Siguiente"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "La anchura en milímetros en la placa de impresión."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "La altura del volumen de impresión se ha reducido debido al valor del ajuste «Secuencia de impresión» para evitar que el caballete colisione con los modelos impresos."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Anchura (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Volumen de impresión"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "La profundidad en milímetros en la placa de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "No se pudo guardar el archivo de material en {}:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profundidad (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Se ha producido un error al guardar el archivo de material"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Para las litofanías, los píxeles oscuros deben coincidir con ubicaciones más gruesas para bloquear la entrada de más luz. En los mapas de altura, los píxeles más claros se corresponden con un terreno más alto, por lo que dichos píxeles deben coincidir con ubicaciones más gruesas en el modelo 3D generado."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Error desconocido."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Cuanto más oscuro más alto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "El archivo ya existe"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Cuanto más claro más alto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "El archivo <filename>{0}</filename> ya existe. ¿Está seguro de que desea sobrescribirlo?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Para las litofanías hay disponible un modelo logarítmico simple para la translucidez. En los mapas de altura, los valores de los píxeles corresponden a las alturas linealmente."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "URL del archivo no válida:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Lineal"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "No compatible"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Translucidez"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "El porcentaje de luz que penetra en una impresión con un grosor de 1 milímetro. Bajar este valor aumenta el contraste en las regiones oscuras y disminuye el contraste en las regiones claras de la imagen."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "La configuración se ha cambiado para que coincida con los extrusores disponibles en este momento:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmitancia de 1 mm (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Ajustes actualizados"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "La cantidad de suavizado que se aplica a la imagen."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extrusores deshabilitados"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Suavizado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Error al exportar el perfil a <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "Aceptar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Error al exportar el perfil a <filename>{0}</filename>: Error en el complemento de escritura."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Seleccione cualquier actualización de Ultimaker Original"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Perfil exportado a <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Placa de impresión caliente (kit oficial o construida por usted mismo)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Exportación correcta"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivelación de la placa de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Error al importar el perfil de <filename>{0}</filename>: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Ahora puede ajustar la placa de impresión para asegurarse de que sus impresiones salgan muy bien. Al hacer clic en 'Mover a la siguiente posición', la tobera se trasladará a las diferentes posiciones que se pueden ajustar."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "No se puede importar el perfil de <filename>{0}</filename> antes de añadir una impresora."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Para cada posición: inserte una hoja de papel debajo de la tobera y ajuste la altura de la placa de impresión. La altura de la placa de impresión es correcta cuando el papel queda ligeramente sujeto por la punta de la tobera."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "No hay ningún perfil personalizado para importar en el archivo <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Iniciar nivelación de la placa de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Error al importar el perfil de <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Mover a la siguiente posición"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Este perfil <filename>{0}</filename> contiene datos incorrectos, no se han podido importar."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Más información sobre la recopilación de datos anónimos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Error al importar el perfil de <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura recopila datos anónimos para mejorar la calidad de impresión y la experiencia de usuario. A continuación, hay un ejemplo de todos los datos que se comparten:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "Perfil {0} importado correctamente."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "No deseo enviar datos anónimos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "El archivo {0} no contiene ningún perfil válido."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Permitir el envío de datos anónimos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "El perfil {0} tiene un tipo de archivo desconocido o está corrupto."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Perfil personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Tendrá que reiniciar Cura para que los cambios de los paquetes surtan efecto."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Al perfil le falta un tipo de calidad."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Salir de %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Todavía no hay ninguna impresora activa."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Instalar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "No se puede añadir el perfil."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Instalado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "El tipo de calidad '{0}' no es compatible con la definición actual de máquina activa '{1}'."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Prémium"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Advertencia: el perfil no es visible porque su tipo de calidad '{0}' no está disponible para la configuración actual. Cambie a una combinación de material/tobera que pueda utilizar este tipo de calidad."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Ir a Web Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Multiplicar y colocar objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Buscar materiales"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Colocando objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilidad"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Colocando objeto"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Máquina"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "No se puede iniciar un nuevo proceso de inicio de sesión. Compruebe si todavía está activo otro intento de inicio de sesión."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Placa de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "No se puede acceder al servidor de cuentas de Ultimaker."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Soporte"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "Error de inicio de sesión"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Calidad"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "No se ha podido leer la respuesta."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Especificaciones técnicas"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "El estado indicado no es correcto."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Especificaciones de seguridad"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Se agotó el tiempo de autenticación con el servidor de la cuenta."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Directrices de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Conceda los permisos necesarios al autorizar esta aplicación."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Sitio web"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Se ha producido un problema al intentar iniciar sesión, vuelva a intentarlo."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Inicie sesión</a> para realizar la instalación o la actualización"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura no puede iniciarse"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href=”%1”>Comprar bobinas de material</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>¡Vaya! Ultimaker Cura ha encontrado un error.</p></b>\n"
+"                    <p>Hemos detectado un error irreversible durante el inicio, posiblemente como consecuencia de varios archivos de configuración erróneos. Le recomendamos que realice una copia de seguridad y que restablezca los ajustes.</p>\n"
+"                    <p>Las copias de seguridad se encuentran en la carpeta de configuración.</p>\n"
+"                    <p>Envíenos el informe de errores para que podamos solucionar el problema.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Actualizar"
+msgid "Send crash report to Ultimaker"
+msgstr "Enviar informe de errores a Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Actualizando"
+msgid "Show detailed crash report"
+msgstr "Mostrar informe de errores detallado"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Actualizado"
+msgid "Show configuration folder"
+msgstr "Mostrar carpeta de configuración"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Atrás"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Complementos"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiales"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Instalado"
+msgid "Backup and Reset Configuration"
+msgstr "Realizar copia de seguridad y restablecer configuración"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Se instalará después de reiniciar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Informe del accidente"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Inicie sesión</a> para realizar la actualización"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Se ha producido un error grave en Cura. Envíenos este informe de errores para que podamos solucionar el problema.</p></b>\n"
+"            <p>Utilice el botón \"Enviar informe\" para publicar automáticamente el informe de errores en nuestros servidores.</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Degradar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Información del sistema"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Desinstalar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Desconocido"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contribuciones de la comunidad"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Versión de Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Complementos de la comunidad"
+msgid "Cura language"
+msgstr "Idioma de Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiales genéricos"
+msgid "OS language"
+msgstr "Idioma del sistema operativo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Buscando paquetes..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Plataforma"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Sitio web"
+msgid "Qt version"
+msgstr "Versión Qt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "Correo electrónico"
+msgid "PyQt version"
+msgstr "Versión PyQt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Inicie sesión para obtener complementos y materiales verificados para Ultimaker Cura Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Versión"
+msgid "Not yet initialized<br/>"
+msgstr "Aún no se ha inicializado<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Última actualización"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>Versión de OpenGL: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marca"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>Proveedor de OpenGL: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Descargas"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>Representador de OpenGL: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Complementos instalados"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Rastreabilidad de errores"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "No se ha instalado ningún complemento."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Registros"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Materiales instalados"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Enviar informe"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "No se ha instalado ningún material."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Asegúrese de que la impresora está conectada:\n"
+"- Compruebe que la impresora está encendida.\n"
+"- Compruebe que la impresora está conectada a la red.\n"
+"- Compruebe que ha iniciado sesión para ver impresoras conectadas a la nube."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Complementos agrupados"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Conecte su impresora a la red."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Materiales agrupados"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Ver manuales de usuario en línea"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "No se ha podido conectar con la base de datos del Paquete Cura. Compruebe la conexión."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Para supervisar la copia impresa desde Cura, conecte la impresora."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Tiene que aceptar la licencia para instalar el paquete"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Seleccionar ajustes o personalizar este modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Cambios desde su cuenta"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtrar..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Descartar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Mostrar todo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Siguiente"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Tipo de malla"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Se añadirán los siguientes paquetes:"
+msgid "Normal model"
+msgstr "Modelo normal"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Los siguientes paquetes no se pueden instalar debido a una versión no compatible de Cura:"
+msgid "Print as support"
+msgstr "Imprimir como soporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Confirmar desinstalación"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Modificar los ajustes de las superposiciones"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Va a desinstalar materiales o perfiles que todavía están en uso. Si confirma la desinstalación, los siguientes materiales o perfiles volverán a sus valores predeterminados."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "No es compatible con superposiciones"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiales"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Solo malla de relleno"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Perfiles"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Cortar malla"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Confirmar"
+msgid "Select settings"
+msgstr "Seleccionar ajustes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Actualizar firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Combinación de colores"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "El firmware es la parte del software que se ejecuta directamente en la impresora 3D. Este firmware controla los motores de pasos, regula la temperatura y, finalmente, hace que funcione la impresora."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Color del material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "El firmware que se envía con las nuevas impresoras funciona, pero las nuevas versiones suelen tener más funciones y mejoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Tipo de línea"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Actualización de firmware automática"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Velocidad"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Cargar firmware personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Grosor de la capa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "No se puede actualizar el firmware porque no hay conexión con la impresora."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Ancho de línea"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "No se puede actualizar el firmware porque la conexión con la impresora no permite actualizaciones de firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Flujo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Seleccionar firmware personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Modo de compatibilidad"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Actualización del firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Desplazamientos"
+msgid "Updating firmware."
+msgstr "Actualización del firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Asistentes"
+msgid "Firmware update completed."
+msgstr "Actualización del firmware completada."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Perímetro"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Se ha producido un error al actualizar el firmware debido a un error desconocido."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Relleno"
+msgid "Firmware update failed due to an communication error."
+msgstr "Se ha producido un error al actualizar el firmware debido a un error de comunicación."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "Inicios"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Se ha producido un error al actualizar el firmware debido a un error de entrada/salida."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Mostrar solo capas superiores"
+msgid "Firmware update failed due to missing firmware."
+msgstr "Se ha producido un error al actualizar el firmware porque falta el firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Mostrar cinco capas detalladas en la parte superior"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Cancelado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Superior o inferior"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Terminado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Pared interior"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Preparando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "mín"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Cancelando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "máx"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Error"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Pausando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "En pausa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Reanudando..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Acción requerida"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Termina el %1 a las %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Administrar impresora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Vidrio"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Actualice el firmware de la impresora para gestionar la cola de forma remota."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Las transmisiones de la cámara web para impresoras en la nube no se pueden ver en Ultimaker Cura. Haga clic en \"Administrar impresora\" para ir a Ultimaker Digital Factory y ver esta cámara web."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Cargando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "No disponible"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "No se puede conectar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Sin actividad"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Preparando..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Imprimiendo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Sin título"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anónimo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Debe cambiar la configuración"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Detalles"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Impresora no disponible"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Primera disponible"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "En cola"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gestionar en el navegador"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "No hay trabajos de impresión en la cola. Segmentar y enviar un trabajo para añadir uno."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Trabajos de impresión"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Tiempo de impresión total"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Esperando"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Imprimir a través de la red"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Imprimir"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Selección de la impresora"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Cambios de configuración"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Anular"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "Es necesario realizar el siguiente cambio de configuración en la impresora asignada %1:"
 msgstr[1] "Es necesario realizar los siguientes cambios de configuración en la impresora asignada %1:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "Se ha asignado la impresora %1, pero el trabajo tiene una configuración de material desconocido."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Cambiar material %1, de %2 a %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "Cargar %3 como material %1 (no se puede anular)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Cambiar print core %1, de %2 a %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Cambiar la placa de impresión a %1 (no se puede anular)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Al sobrescribir la configuración se usarán los ajustes especificados con la configuración de impresora existente. Esto podría provocar un fallo en la impresión."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Aluminio"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Terminado"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Cancelando..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Cancelado"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Error"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Pausando..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "En pausa"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Reanudando..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Imprimir a través de la red"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Acción requerida"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Imprimir"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Termina el %1 a las %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Selección de la impresora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Conectar con la impresora en red"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Para imprimir directamente a través de la red, asegúrese de que la impresora está conectada a la red mediante un cable de red o conéctela a la red wifi. Si no conecta Cura con la impresora, también puede utilizar una unidad USB para transferir archivos GCode a la impresora."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Seleccione la impresora en la lista siguiente:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Editar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Eliminar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Actualizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Si la impresora no aparece en la lista, lea la <a href='%1'>guía de solución de problemas de impresión y red</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tipo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Versión de firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Dirección"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Esta impresora no está configurada para alojar un grupo de impresoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Esta impresora aloja un grupo de %1 impresoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "La impresora todavía no ha respondido en esta dirección."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Conectar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Dirección IP no válida"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Introduzca una dirección IP válida."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Dirección de la impresora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Introduzca la dirección IP de la impresora en la red."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Impresora no disponible"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "Primera disponible"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Mover al principio"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Borrar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Reanudar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Pausando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Reanudando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pausar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Cancelando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Cancelar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "¿Seguro que desea mover %1 al principio de la cola?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Mover trabajo de impresión al principio"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "¿Seguro que desea borrar %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Borrar trabajo de impresión"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "¿Seguro que desea cancelar %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Cancela la impresión"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "En cola"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gestionar en el navegador"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "No hay trabajos de impresión en la cola. Segmentar y enviar un trabajo para añadir uno."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Trabajos de impresión"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Tiempo de impresión total"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Esperando"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Combinación de colores"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Color del material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Tipo de línea"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Velocidad"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Grosor de la capa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Ancho de línea"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Flujo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Modo de compatibilidad"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Desplazamientos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Asistentes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Perímetro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Relleno"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "Inicios"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Mostrar solo capas superiores"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Mostrar cinco capas detalladas en la parte superior"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Superior o inferior"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Pared interior"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "mín"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "máx"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Asegúrese de que la impresora está conectada:\n"
-"- Compruebe que la impresora está encendida.\n"
-"- Compruebe que la impresora está conectada a la red.\n"
-"- Compruebe que ha iniciado sesión para ver impresoras conectadas a la nube."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Conecte su impresora a la red."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Altura (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Ver manuales de usuario en línea"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "La distancia máxima de cada píxel desde la \"Base\"."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Para supervisar la copia impresa desde Cura, conecte la impresora."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Algunos elementos pueden causar problemas durante la impresión. Haga clic para ver consejos sobre cómo ajustarlos."
+msgid "The base height from the build plate in millimeters."
+msgstr "La altura de la base desde la placa de impresión en milímetros."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Anchura (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Vista en 3D"
+msgid "The width in millimeters on the build plate"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profundidad (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Vista frontal"
+msgid "The depth in millimeters on the build plate"
+msgstr "La profundidad en milímetros en la placa de impresión"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Cuanto más oscuro más alto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Cuanto más claro más alto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Vista superior"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Para las litofanías, los píxeles oscuros deben coincidir con ubicaciones más gruesas para bloquear la entrada de más luz. En los mapas de altura, los píxeles más claros se corresponden con un terreno más alto, por lo que dichos píxeles deben coincidir con ubicaciones más gruesas en el modelo 3D generado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Lineal"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Translucidez"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Vista del lado izquierdo"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Para las litofanías hay disponible un modelo logarítmico simple para la translucidez. En los mapas de altura, los valores de los píxeles corresponden a las alturas linealmente."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmitancia de 1 mm (%)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Vista del lado derecho"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "El porcentaje de luz que penetra en una impresión con un grosor de 1 milímetro. Bajar este valor aumenta el contraste en las regiones oscuras y disminuye el contraste en las regiones claras de la imagen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Lista de objetos"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Suavizado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "La cantidad de suavizado que se aplica a la imagen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marketplace"
+msgid "OK"
+msgstr "Aceptar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Archivo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Abrir proyecto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Edición"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Actualizar existente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Ver"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Crear nuevo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "A&justes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Resumen: proyecto de Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensiones"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "¿Cómo debería solucionarse el conflicto en la máquina?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Pre&ferencias"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Ajustes de la impresora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "A&yuda"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tipo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nuevo proyecto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Grupo de impresoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "¿Está seguro de que desea iniciar un nuevo proyecto? Esto borrará la placa de impresión y cualquier ajuste no guardado."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "¿Cómo debería solucionarse el conflicto en el perfil?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Segmentando..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Ajustes del perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "No se puede segmentar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nombre"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "No está en el perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 sobrescrito"
+msgstr[1] "%1 sobrescritos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivado de"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 sobrescrito"
+msgstr[1] "%1, %2 sobrescritos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "¿Cómo debería solucionarse el conflicto en el material?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Ajustes del material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Visibilidad de los ajustes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Ajustes visibles:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 de un total de %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Si carga un proyecto, se borrarán todos los modelos de la placa de impresión."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Abrir"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Procesando"
+msgid "Want more?"
+msgstr "¿Desea obtener más información?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Segmentación"
+msgid "Backup Now"
+msgstr "Realizar copia de seguridad ahora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Iniciar el proceso de segmentación"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Copia de seguridad automática"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Cancelar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Crea una copia de seguridad de forma automática cada día que inicia Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Estimación de tiempos"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Versión de Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Estimación de material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Máquinas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiales"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Perfiles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Ningún cálculo de tiempo disponible"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Complementos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Ningún cálculo de costes disponible"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Restaurar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Eliminar copia de seguridad"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "¿Seguro que desea eliminar esta copia de seguridad? Esta acción no se puede deshacer."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Restaurar copia de seguridad"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Deberá reiniciar Cura para restaurar su copia de seguridad. ¿Desea cerrar Cura ahora?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Realice una copia de seguridad y sincronice sus ajustes de Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Vista previa"
+msgid "Sign in"
+msgstr "Iniciar sesión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Agregar una impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Mis copias de seguridad"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Actualmente no posee ninguna copia de seguridad. Utilice el botón de Realizar copia de seguridad ahora para crear una."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Durante la fase de vista previa, solo se mostrarán 5 copias de seguridad. Elimine una copia de seguridad para ver copias de seguridad antiguas."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Copias de seguridad de Cura"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Más información sobre la recopilación de datos anónimos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura recopila datos anónimos para mejorar la calidad de impresión y la experiencia de usuario. A continuación, hay un ejemplo de todos los datos que se comparten:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "No deseo enviar datos anónimos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Permitir el envío de datos anónimos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Complemento de posprocesamiento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Agregar una impresora en red"
+msgid "Post Processing Scripts"
+msgstr "Secuencias de comandos de posprocesamiento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Añadir secuencia de comando"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Agregar una impresora fuera de red"
+msgid "Settings"
+msgstr "Ajustes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Cambiar las secuencias de comandos de posprocesamiento."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "La siguiente secuencia de comandos está activa:"
+msgstr[1] "Las siguientes secuencias de comandos están activas:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Añadir una impresora a la nube"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Seleccione cualquier actualización de Ultimaker Original"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Esperando la respuesta de la nube"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Placa de impresión caliente (kit oficial o construida por usted mismo)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivelación de la placa de impresión"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "¿No se han encontrado impresoras en su cuenta?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Ahora puede ajustar la placa de impresión para asegurarse de que sus impresiones salgan muy bien. Al hacer clic en 'Mover a la siguiente posición', la tobera se trasladará a las diferentes posiciones que se pueden ajustar."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Las siguientes impresoras de su cuenta se han añadido en Cura:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Para cada posición: inserte una hoja de papel debajo de la tobera y ajuste la altura de la placa de impresión. La altura de la placa de impresión es correcta cuando el papel queda ligeramente sujeto por la punta de la tobera."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Iniciar nivelación de la placa de impresión"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Mover a la siguiente posición"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Añadir impresora manualmente"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Agregar impresora por dirección IP"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Introduzca la dirección IP de su impresora."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Agregar"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "No se ha podido conectar al dispositivo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Salir de %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "¿No puede conectarse a la impresora Ultimaker?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "La impresora todavía no ha respondido en esta dirección."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "No se puede agregar la impresora porque es desconocida o no aloja un grupo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Atrás"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Conectar"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Acuerdo de usuario"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Rechazar y cerrar"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Le damos la bienvenida a Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"Siga estos pasos para configurar\n"
-"Ultimaker Cura. Solo le llevará unos minutos."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Empezar"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Inicie sesión en la plataforma Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Añada ajustes de material y complementos desde Marketplace"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Realice copias de seguridad y sincronice los ajustes y complementos de sus materiales"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Comparta ideas y obtenga ayuda de más de 48 000 usuarios de la comunidad Ultimaker"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Omitir"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Rechazar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Cree una cuenta gratuita de Ultimaker"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Impresora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Ajustes de la tobera"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabricante"
+msgid "Nozzle size"
+msgstr "Tamaño de la tobera"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor del perfil"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Nombre de la impresora"
+msgid "Compatible material diameter"
+msgstr "Diámetro del material compatible"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Asigne un nombre a su impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Desplazamiento de la tobera sobre el eje X"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "No se ha encontrado ninguna impresora en su red."
+msgid "Nozzle offset Y"
+msgstr "Desplazamiento de la tobera sobre el eje Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Actualizar"
+msgid "Cooling Fan Number"
+msgstr "Número de ventilador de enfriamiento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "GCode inicial del extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "GCode final del extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Ajustes de la impresora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Agregar impresora por IP"
+msgid "X (Width)"
+msgstr "X (anchura)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Añadir impresora a la nube"
+msgid "Y (Depth)"
+msgstr "Y (profundidad)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Solución de problemas"
+msgid "Z (Height)"
+msgstr "Z (altura)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ayúdenos a mejorar Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "Forma de la placa de impresión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura recopila datos anónimos para mejorar la calidad de impresión y la experiencia de usuario, entre otros:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Origen en el centro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Tipos de máquina"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Plataforma calentada"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Uso de material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volumen de impresión calentado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Número de segmentos"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Tipo de GCode"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Ajustes de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Ajustes del cabezal de impresión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Los datos recopilados por Ultimaker Cura no contendrán información personal."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X mín"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Más información"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y mín"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "Novedades"
+msgid "X max"
+msgstr "X máx"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Vacío"
+msgid "Y max"
+msgstr "Y máx"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Notas de la versión"
+msgid "Gantry Height"
+msgstr "Altura del puente"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Número de extrusores"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Aplicar compensaciones del extrusor a GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Iniciar GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Finalizar GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "Mis impresoras"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Supervise las impresoras de Ultimaker Digital Factory."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Cree proyectos de impresión en Digital Library."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Trabajos de impresión"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Supervise los trabajos de impresión y vuelva a imprimir desde su historial de impresión."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Amplíe Ultimaker Cura con complementos y perfiles de materiales."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Conviértase en un experto en impresión 3D con el aprendizaje electrónico de Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Soporte técnico de Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Aprenda cómo empezar a utilizar Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Haga una pregunta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Consulte en la Comunidad Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Informar del error"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Informe a los desarrolladores de que algo no funciona bien."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Visite el sitio web de Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Imprimir modelo seleccionado con %1"
+msgstr[1] "Imprimir modelos seleccionados con %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "A&justes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nuevo proyecto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "¿Está seguro de que desea iniciar un nuevo proyecto? Esto borrará la placa de impresión y cualquier ajuste no guardado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marketplace"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Placa de impresión"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "Temperatura objetivo de la plataforma calentada. La plataforma se calentará o enfriará en función de esta temperatura. Si el valor es 0, el calentamiento de la plataforma se desactivará."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "Temperatura actual de la plataforma caliente."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "Temperatura a la que se va a precalentar la plataforma."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Cancelar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Precalentar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Caliente la plataforma antes de imprimir. Puede continuar ajustando la impresión durante el calentamiento, así no tendrá que esperar a que la plataforma se caliente para poder imprimir."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "La impresora no está conectada."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Control de impresoras"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Posición de desplazamiento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Distancia de desplazamiento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Enviar GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Envíe un comando de GCode personalizado a la impresora conectada. Pulse «Intro» para enviar el comando."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Temperatura objetivo del extremo caliente. El extremo caliente se calentará o enfriará en función de esta temperatura. Si el valor es 0, el calentamiento del extremo caliente se desactivará."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Temperatura actual de este extremo caliente."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "Temperatura a la que se va a precalentar el extremo caliente."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Caliente el extremo caliente antes de imprimir. Puede continuar ajustando la impresión durante el calentamiento, así no tendrá que esperar a que el extremo caliente se caliente para poder imprimir."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Color del material en este extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Material en este extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "Tobera insertada en este extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Abrir archivo de proyecto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Este es un archivo de proyecto Cura. ¿Le gustaría abrirlo como un proyecto o importar sus modelos?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Recordar mi selección"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Abrir como proyecto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importar modelos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Guardar proyecto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Extrusor %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 y material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "No mostrar resumen de proyecto al guardar de nuevo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Guardar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Abrir archivo(s)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Hemos encontrado uno o más archivos del proyecto entre los archivos que ha seleccionado. Solo puede abrir los archivos de proyecto de uno en uno. Le recomendamos que solo importe modelos de esos archivos. ¿Desea continuar?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Importar todos como modelos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Acerca de %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versión: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Solución completa para la impresión 3D de filamento fundido."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3762,2227 +3595,2385 @@ msgstr ""
 "Ultimaker B.V. ha desarrollado Cura en cooperación con la comunidad.\n"
 "Cura se enorgullece de utilizar los siguientes proyectos de código abierto:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interfaz gráfica de usuario (GUI)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Entorno de la aplicación"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Generador de GCode"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Biblioteca de comunicación entre procesos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Lenguaje de programación"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Entorno de la GUI"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Enlaces del entorno de la GUI"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Biblioteca de enlaces C/C++"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formato de intercambio de datos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Biblioteca de apoyo para cálculos científicos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Biblioteca de apoyo para cálculos más rápidos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Biblioteca de apoyo para gestionar archivos STL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Biblioteca de compatibilidad para trabajar con objetos planos"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Biblioteca de compatibilidad para trabajar con mallas triangulares"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Biblioteca de compatibilidad para trabajar con archivos 3MF"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Biblioteca de compatibilidad para metadatos y transmisión de archivos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Biblioteca de comunicación en serie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Biblioteca de detección para Zeroconf"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Biblioteca de recorte de polígonos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Comprobador de tipo estático para Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificados de raíz para validar la fiabilidad del SSL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Biblioteca de seguimiento de errores de Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Biblioteca de empaquetado de polígonos, desarrollada por Prusa Research"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Enlaces de Python para libnest2d"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Biblioteca de soporte para el acceso al llavero del sistema"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Extensiones Python para Microsoft Windows"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Fuente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Iconos SVG"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Implementación de la aplicación de distribución múltiple de Linux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Abrir archivo(s)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Hemos encontrado uno o más archivos del proyecto entre los archivos que ha seleccionado. Solo puede abrir los archivos de proyecto de uno en uno. Le recomendamos que solo importe modelos de esos archivos. ¿Desea continuar?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Importar todos como modelos"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Guardar proyecto"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Extrusor %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 y material"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Material"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "No mostrar resumen de proyecto al guardar de nuevo"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Guardar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Descartar o guardar cambios"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"Ha personalizado algunos ajustes del perfil.\n"
-"¿Le gustaría mantener estos ajustes cambiados después de cambiar de perfil?\n"
-"También puede descartar los cambios para cargar los valores predeterminados de'%1'."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Ajustes del perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Cambios actuales"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Preguntar siempre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Descartar y no volver a preguntar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Guardar y no volver a preguntar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Descartar los cambios"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Mantener los cambios"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Abrir archivo de proyecto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "No hay elementos para seleccionar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Este es un archivo de proyecto Cura. ¿Le gustaría abrirlo como un proyecto o importar sus modelos?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Abrir archivo(s)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Recordar mi selección"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Abrir &reciente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Abrir como proyecto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Ajustes visibles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importar modelos"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Contraer todas las categorías"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gestionar visibilidad de los ajustes..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Definir como extrusor activo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Habilitar extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Deshabilitar extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoritos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Genérico"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "A&yuda"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Archivo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Guardar proyecto..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportar..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Exportar selección..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Pre&ferencias"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Edición"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Impresora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Impresoras de red habilitadas"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Impresoras locales"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensiones"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configuraciones"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Activar impresión"
+msgid "Loading available configurations from the printer..."
+msgstr "Cargando configuraciones disponibles desde la impresora..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Nombre del trabajo"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Las configuraciones no se encuentran disponibles porque la impresora no está conectada."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tiempo de impresión"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Esta configuración no se encuentra disponible porque %1 es un perfil desconocido. Visite %2 para descargar el perfil de materiales correcto."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Tiempo restante estimado"
+msgid "Marketplace"
+msgstr "Marketplace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "La impresora de la nube está sin conexión. Compruebe si la impresora está encendida y conectada a Internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "La configuración de este extrusor no está permitida y evita el corte."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Esta impresora no está vinculada a su cuenta. Vaya a Ultimaker Digital Factory para establecer una conexión."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "No hay perfiles que coincidan con la configuración de este extrusor."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "La conexión de la nube no está disponible actualmente. Inicie sesión para conectarse a la impresora de la nube."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Seleccionar configuración"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "La conexión de la nube no está disponible actualmente. Compruebe la conexión a Internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configuraciones"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Agregar impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Administrar impresoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Impresora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Impresoras conectadas"
+msgid "Enabled"
+msgstr "Habilitado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Impresoras preconfiguradas"
+msgid "Material"
+msgstr "Material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Ajustes de impresión"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Utilice pegamento con esta combinación de materiales para lograr una mejor adhesión."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Configuración de impresión deshabilitada. No se puede modificar el archivo GCode."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Imprimir modelo seleccionado con:"
+msgstr[1] "Imprimir modelos seleccionados con:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Multiplicar modelo seleccionado"
+msgstr[1] "Multiplicar modelos seleccionados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Perfil"
+msgid "Number of Copies"
+msgstr "Número de copias"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Guardar proyecto..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Ver"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Posición de la cámara"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Vista de cámara"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspectiva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Ortográfica"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Ver tipo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Inicie sesión en la plataforma Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Algunos valores de los ajustes o sobrescrituras son distintos a los valores almacenados en el perfil.\n"
-"\n"
-"Haga clic para abrir el administrador de perfiles."
+"- Añada perfiles de materiales y complementos del Marketplace \n"
+"- Realice copias de seguridad y sincronice los perfiles y complementos de sus materiales \n"
+"- Comparta ideas y obtenga ayuda de más de 48 000 usuarios de la comunidad Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Perfiles personalizados"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Cree una cuenta gratuita de Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Descartar cambios actuales"
+msgid "Sign in"
+msgstr "Iniciar sesión"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Última actualización: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Recomendado"
+msgid "Ultimaker Account"
+msgstr "Cuenta de Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Personalizado"
+msgid "Sign Out"
+msgstr "Cerrar sesión"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Comprobando..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Cuenta sincronizada"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Se ha producido un error..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Instalar actualizaciones pendientes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Buscar actualizaciones de la cuenta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Segmentando..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "No se puede segmentar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Procesando"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Segmentación"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Iniciar el proceso de segmentación"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Cancelar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Estimación de tiempos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Estimación de material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Ningún cálculo de tiempo disponible"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Ningún cálculo de costes disponible"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Vista previa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Este paquete se instalará después de reiniciar."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "General"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Ajustes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Impresoras"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiales"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Perfiles"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Cerrando %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "¿Seguro que desea salir de %1?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Instalar paquete"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Abrir archivo(s)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Hemos encontrado uno o más archivos de GCode entre los archivos que ha seleccionado. Solo puede abrir los archivos GCode de uno en uno. Si desea abrir un archivo GCode, seleccione solo uno."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Agregar impresora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Novedades"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Encendido"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Apagado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Experimental"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Ajustes de impresión"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Configuración de impresión deshabilitada. No se puede modificar el archivo GCode."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Recomendado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personalizado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "No hay ningún perfil %1 para configuración en %2 extrusor. En su lugar se utilizará la opción predeterminada"
 msgstr[1] "No hay ningún perfil %1 para configuraciones en %2 extrusores. En su lugar se utilizará la opción predeterminada"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Perfiles"
+msgid "Gradual infill"
+msgstr "Relleno gradual"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Ha modificado algunos ajustes del perfil. Si desea cambiarlos, hágalo en el modo personalizado."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Un relleno gradual aumentará gradualmente la cantidad de relleno hacia arriba."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Soporte"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Generar estructuras para soportar piezas del modelo que tengan voladizos. Sin estas estructuras, estas piezas se romperían durante la impresión."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Relleno gradual"
+msgid "Profiles"
+msgstr "Perfiles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Un relleno gradual aumentará gradualmente la cantidad de relleno hacia arriba."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Ha modificado algunos ajustes del perfil. Si desea cambiarlos, hágalo en el modo personalizado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Adherencia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Habilita la impresión de un borde o una balsa. Esta opción agregará un área plana alrededor del objeto, que es fácil de cortar después."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Guardar proyecto..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Perfiles personalizados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Impresoras de red habilitadas"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Descartar cambios actuales"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Impresoras locales"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Algunos valores de los ajustes o sobrescrituras son distintos a los valores almacenados en el perfil.\n"
+"\n"
+"Haga clic para abrir el administrador de perfiles."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoritos"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Ajustes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Genérico"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Imprimir modelo seleccionado con:"
-msgstr[1] "Imprimir modelos seleccionados con:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Actual"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplicar modelo seleccionado"
-msgstr[1] "Multiplicar modelos seleccionados"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Número de copias"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Guardar proyecto..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportar..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Exportar selección..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Visibilidad de los ajustes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configuraciones"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personalizado"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Comprobar todo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Activar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Cambiar nombre"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Confirmar cambio de diámetro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "El nuevo diámetro del filamento está ajustado en %1 mm y no es compatible con el extrusor actual. ¿Desea continuar?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Impresora"
+msgid "Display Name"
+msgstr "Mostrar nombre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Habilitado"
+msgid "Brand"
+msgstr "Marca"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Material"
+msgid "Material Type"
+msgstr "Tipo de material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Utilice pegamento con esta combinación de materiales para lograr una mejor adhesión."
+msgid "Color"
+msgstr "Color"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "La configuración de este extrusor no está permitida y evita el corte."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "No hay perfiles que coincidan con la configuración de este extrusor."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Propiedades"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Seleccionar configuración"
+msgid "Density"
+msgstr "Densidad"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configuraciones"
+msgid "Diameter"
+msgstr "Diámetro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Cargando configuraciones disponibles desde la impresora..."
+msgid "Filament Cost"
+msgstr "Coste del filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Las configuraciones no se encuentran disponibles porque la impresora no está conectada."
+msgid "Filament weight"
+msgstr "Peso del filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Esta configuración no se encuentra disponible porque %1 es un perfil desconocido. Visite %2 para descargar el perfil de materiales correcto."
+msgid "Filament length"
+msgstr "Longitud del filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marketplace"
+msgid "Cost per Meter"
+msgstr "Coste por metro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Abrir archivo(s)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Este material está vinculado a %1 y comparte alguna de sus propiedades."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Desvincular material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Descripción"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Definir como extrusor activo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Información sobre adherencia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Habilitar extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Información"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Deshabilitar extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Sincronizar materiales con impresoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Abrir &reciente"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Sincronizar materiales con impresoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Ajustes visibles"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "Con unos sencillos pasos puede sincronizar todos sus perfiles de material con sus impresoras."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Contraer todas las categorías"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "¿Por qué tengo que sincronizar los perfiles de materiales?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gestionar visibilidad de los ajustes..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Iniciar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Posición de la cámara"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Iniciar sesión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Vista de cámara"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Para sincronizar automáticamente los perfiles de material con todas sus impresoras conectadas a Digital Factory debe iniciar sesión en Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspectiva"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Sincronización de materiales con USB"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortográfica"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "Las siguientes impresoras recibirán los nuevos perfiles de material:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "P&laca de impresión"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "Hubo un error al enviar los materiales a las impresoras."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Ver tipo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "Los perfiles de material se han sincronizado correctamente con las siguientes impresoras:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Se imprime como soporte."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Solución de problemas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Se han modificado otros modelos que se superponen con este modelo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "¿Faltan impresoras?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Se ha modificado la superposición del relleno con este modelo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Asegúrese de que todas las impresoras estén encendidas y conectadas a Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "No se admiten superposiciones con este modelo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Actualizar la lista"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "%1 sobrescrito."
-msgstr[1] "%1 sobrescritos."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Inténtelo de nuevo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Perfiles"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Realizado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Activar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Sincronizar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Crear"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "Sincronizando"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "No se ha encontrado ninguna impresora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Parece que no tiene ninguna impresora compatible conectada a Digital Factory. Asegúrese de que su impresora esté conectada y ejecutando el firmware más reciente."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Aprenda a conectar su impresora a Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Actualizar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Sincronización de perfiles de material a través USB"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Siga estos pasos para cargar los nuevos perfiles de material en la impresora."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Haga clic en el botón para exportar el archivo de material."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "Guarde el archivo .umm en una memoria USB."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "Inserte la memoria USB en la impresora e inicie el procedimiento para cargar nuevos perfiles de material."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Cómo cargar nuevos perfiles de material en mi impresora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Atrás"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Exportar archivo de material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Exportar todos los materiales"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplicado"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Cambiar nombre"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Importar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Exportar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Crear perfil"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Introduzca un nombre para este perfil."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplicado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplicar perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exportar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Confirmar eliminación"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "¿Seguro que desea eliminar %1? ¡Esta acción no se puede deshacer!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Cambiar nombre de perfil"
+msgid "Import Material"
+msgstr "Importar material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importar perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "El material se ha importado correctamente en <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "No se pudo importar el material en <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exportar perfil"
+msgid "Export Material"
+msgstr "Exportar material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Se ha producido un error al exportar el material a <filename>%1</filename>: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "El material se ha exportado correctamente a <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Impresora: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Actualizar perfil con ajustes o sobrescrituras actuales"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Este perfil utiliza los ajustes predeterminados especificados por la impresora, por eso no aparece ningún ajuste o sobrescritura en la lista que se ve a continuación."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Los ajustes actuales coinciden con el perfil seleccionado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Ajustes globales"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "General"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Crear perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Introduzca un nombre para este perfil."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exportar perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplicar perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Cambiar nombre de perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importar perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interfaz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Moneda:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Tema:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Tendrá que reiniciar la aplicación para que estos cambios tengan efecto."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Segmentar automáticamente al cambiar los ajustes."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Segmentar automáticamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportamiento de la ventanilla"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Resaltar en rojo las áreas del modelo sin soporte. Sin soporte, estas áreas no se imprimirán correctamente."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Mostrar voladizos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Resalta las superficies que faltan o son extrañas del modelo usando señales de advertencia. A las trayectorias de herramientas les faltarán a menudo partes de la geometría prevista."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Mostrar errores de modelo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Mueve la cámara de manera que el modelo se encuentre en el centro de la vista cuando se selecciona un modelo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centrar cámara cuando se selecciona elemento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "¿Se debería invertir el comportamiento predeterminado del zoom de cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Invertir la dirección del zoom de la cámara."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "¿Debería moverse el zoom en la dirección del ratón?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Hacer zoom en la dirección del ratón no es compatible con la perspectiva ortográfica."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Hacer zoom en la dirección del ratón"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "¿Deben moverse los modelos en la plataforma de modo que no se crucen?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Asegúrese de que los modelos están separados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "¿Deben moverse los modelos del área de impresión de modo que no toquen la placa de impresión?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Arrastrar modelos a la placa de impresión de forma automática"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Se muestra el mensaje de advertencia en el lector de GCode."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Mensaje de advertencia en el lector de GCode"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "¿Debe forzarse el modo de compatibilidad de la capa?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forzar modo de compatibilidad de la vista de capas (necesario reiniciar)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "¿Debería abrirse Cura en el lugar donde se cerró?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurar la posición de la ventana al inicio"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "¿Qué tipo de renderizado de cámara debería usarse?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Renderizado de cámara:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Perspectiva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Ortográfica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Abrir y guardar archivos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "¿Debería abrir los archivos del escritorio o las aplicaciones externas en la misma instancia de Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Utilizar una sola instancia de Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "¿Se debe limpiar la placa de impresión antes de cargar un nuevo modelo en una única instancia de Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Limpiar la placa de impresión antes de cargar el modelo en la instancia única"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "¿Deben ajustarse los modelos al volumen de impresión si son demasiado grandes?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Escalar modelos de gran tamaño"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Un modelo puede mostrarse demasiado pequeño si su unidad son metros en lugar de milímetros, por ejemplo. ¿Deben escalarse estos modelos?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Escalar modelos demasiado pequeños"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "¿Se deberían seleccionar los modelos después de haberse cargado?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Seleccionar modelos al abrirlos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "¿Debe añadirse automáticamente un prefijo basado en el nombre de la impresora al nombre del trabajo de impresión?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Agregar prefijo de la máquina al nombre del trabajo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "¿Mostrar un resumen al guardar un archivo de proyecto?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Mostrar un cuadro de diálogo de resumen al guardar el proyecto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportamiento predeterminado al abrir un archivo del proyecto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportamiento predeterminado al abrir un archivo del proyecto: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Preguntar siempre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Abrir siempre como un proyecto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Importar modelos siempre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Si ha realizado cambios en un perfil y, a continuación, ha cambiado a otro, aparecerá un cuadro de diálogo que le preguntará si desea guardar o descartar los cambios. También puede elegir el comportamiento predeterminado, así ese cuadro de diálogo no volverá a aparecer."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportamiento predeterminado para los valores modificados al cambiar a otro perfil: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Descartar siempre los ajustes modificados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Transferir siempre los ajustes modificados al nuevo perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacidad"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "¿Deben enviarse datos anónimos sobre la impresión a Ultimaker? Tenga en cuenta que no se envían ni almacenan modelos, direcciones IP ni otra información de identificación personal."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Enviar información (anónima) de impresión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Más información"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Actualizaciones"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "¿Debe Cura buscar actualizaciones cuando se abre el programa?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Buscar actualizaciones al iniciar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "Cuando busque actualizaciones, compruebe solo si hay versiones estables."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Solo versiones estables"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "Cuando busque actualizaciones, compruebe si hay versiones estables y versiones beta."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "Versiones estables y beta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "¿Debería Cura buscar automáticamente nuevos complementos cada vez que se inicia? Le recomendamos encarecidamente que no desactive esta opción!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Recibir notificaciones de actualizaciones de complementos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Información"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Agregar impresora por dirección IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Confirmar cambio de diámetro"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Introduzca la dirección IP de su impresora."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "El nuevo diámetro del filamento está ajustado en %1 mm y no es compatible con el extrusor actual. ¿Desea continuar?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Agregar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Mostrar nombre"
+msgid "Could not connect to device."
+msgstr "No se ha podido conectar al dispositivo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Tipo de material"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "¿No puede conectarse a la impresora Ultimaker?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Color"
+msgid "The printer at this address has not responded yet."
+msgstr "La impresora todavía no ha respondido en esta dirección."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Propiedades"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "No se puede agregar la impresora porque es desconocida o no aloja un grupo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densidad"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Conectar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Diámetro"
+msgid "Release Notes"
+msgstr "Notas de la versión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Coste del filamento"
+msgid "User Agreement"
+msgstr "Acuerdo de usuario"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Peso del filamento"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Estoy de acuerdo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Longitud del filamento"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Rechazar y cerrar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Coste por metro"
+msgid "What's New"
+msgstr "Novedades"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Siguiente"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Este material está vinculado a %1 y comparte alguna de sus propiedades."
+msgid "Add a Cloud printer"
+msgstr "Añadir una impresora a la nube"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Desvincular material"
+msgid "Waiting for Cloud response"
+msgstr "Esperando la respuesta de la nube"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Descripción"
+msgid "No printers found in your account?"
+msgstr "¿No se han encontrado impresoras en su cuenta?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Información sobre adherencia"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Las siguientes impresoras de su cuenta se han añadido en Cura:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Crear"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Añadir impresora manualmente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplicado"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Añada ajustes de material y complementos desde Marketplace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Sincronizar con las impresoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Realice copias de seguridad y sincronice los ajustes y complementos de sus materiales"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Comparta ideas y obtenga ayuda de más de 48 000 usuarios de la comunidad Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importar material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Omitir"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "No se pudo importar el material en <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Cree una cuenta gratuita de Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "El material se ha importado correctamente en <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Le damos la bienvenida a Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exportar material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"Siga estos pasos para configurar\n"
+"Ultimaker Cura. Solo le llevará unos minutos."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Se ha producido un error al exportar el material a <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Empezar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "El material se ha exportado correctamente a <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vacío"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Sincronizar materiales con impresoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Sincronizar materiales con impresoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor del perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "Con unos sencillos pasos puede sincronizar todos sus perfiles de material con sus impresoras."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nombre de la impresora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Iniciar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Asigne un nombre a su impresora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "¿Por qué tengo que sincronizar los perfiles de materiales?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Agregar una impresora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Iniciar sesión"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Agregar una impresora en red"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Para sincronizar automáticamente los perfiles de material con todas sus impresoras conectadas a Digital Factory debe iniciar sesión en Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Agregar una impresora fuera de red"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Sincronización de materiales con USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "No se ha encontrado ninguna impresora en su red."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "Las siguientes impresoras recibirán los nuevos perfiles de material:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Actualizar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "Hubo un error al enviar los materiales a las impresoras."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Agregar impresora por IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "Los perfiles de material se han sincronizado correctamente con las siguientes impresoras:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Añadir impresora a la nube"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Solución de problemas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "¿Faltan impresoras?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ayúdenos a mejorar Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Asegúrese de que todas las impresoras estén encendidas y conectadas a Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Actualizar la lista"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Inténtelo de nuevo"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Realizado"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura recopila datos anónimos para mejorar la calidad de impresión y la experiencia de usuario, entre otros:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Sincronizar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Tipos de máquina"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "Sincronizando"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Uso de material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "No se ha encontrado ninguna impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Número de segmentos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Parece que no tiene ninguna impresora compatible conectada a Digital Factory. Asegúrese de que su impresora esté conectada y ejecutando el firmware más"
-" reciente."
+msgid "Print settings"
+msgstr "Ajustes de impresión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Aprenda a conectar su impresora a Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Los datos recopilados por Ultimaker Cura no contendrán información personal."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Actualizar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Más información"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Sincronización de perfiles de material a través USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lista de objetos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Siga estos pasos para cargar los nuevos perfiles de material en la impresora."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "Se imprime como soporte."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Haga clic en el botón para exportar el archivo de material."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "Se han modificado otros modelos que se superponen con este modelo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "Guarde el archivo .umm en una memoria USB."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "Se ha modificado la superposición del relleno con este modelo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "Inserte la memoria USB en la impresora e inicie el procedimiento para cargar nuevos perfiles de material."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "No se admiten superposiciones con este modelo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Cómo cargar nuevos perfiles de material en mi impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "%1 sobrescrito."
+msgstr[1] "%1 sobrescritos."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Exportar archivo de material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Impresoras conectadas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Exportar todos los materiales"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Impresoras preconfiguradas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Visibilidad de los ajustes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "La impresora de la nube está sin conexión. Compruebe si la impresora está encendida y conectada a Internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Comprobar todo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Esta impresora no está vinculada a su cuenta. Vaya a Ultimaker Digital Factory para establecer una conexión."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Impresoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "La conexión de la nube no está disponible actualmente. Inicie sesión para conectarse a la impresora de la nube."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calculado"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "La conexión de la nube no está disponible actualmente. Compruebe la conexión a Internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Ajustes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Agregar impresora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Administrar impresoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Actual"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unidad"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Sin título"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "No está conectado a ninguna impresora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "La impresora no acepta comandos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "En mantenimiento. Compruebe la impresora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Se ha perdido la conexión con la impresora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Imprimiendo..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "En pausa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Preparando..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Retire la impresión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Cancelar impresión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "¿Está seguro de que desea cancelar la impresión?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Imprimir modelo seleccionado con %1"
-msgstr[1] "Imprimir modelos seleccionados con %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "Mis impresoras"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Supervise las impresoras de Ultimaker Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Cree proyectos de impresión en Digital Library."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Trabajos de impresión"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Supervise los trabajos de impresión y vuelva a imprimir desde su historial de impresión."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Amplíe Ultimaker Cura con complementos y perfiles de materiales."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Conviértase en un experto en impresión 3D con el aprendizaje electrónico de Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Soporte técnico de Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Algunos ajustes ocultos utilizan valores diferentes de los valores normales calculados.\n"
+"\n"
+"Haga clic para mostrar estos ajustes."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Aprenda cómo empezar a utilizar Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Buscar ajustes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Haga una pregunta"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copiar valor en todos los extrusores"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Consulte en la Comunidad Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copiar todos los valores cambiados en todos los extrusores"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Informar del error"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Ocultar este ajuste"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Informe a los desarrolladores de que algo no funciona bien."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "No mostrar este ajuste"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Visite el sitio web de Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Mostrar este ajuste"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Control de impresoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configurar visibilidad de los ajustes..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Posición de desplazamiento"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Este ajuste no se utiliza porque los ajustes a los que afecta están sobrescritos."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Afecta a"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Afectado por"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Distancia de desplazamiento"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Este ajuste siempre se comparte entre extrusores. Si lo modifica, modificará el valor de todos los extrusores."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Enviar GCode"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Envíe un comando de GCode personalizado a la impresora conectada. Pulse «Intro» para enviar el comando."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Este valor se resuelve a partir de valores en conflicto específicos del extrusor:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Extrusor"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Temperatura objetivo del extremo caliente. El extremo caliente se calentará o enfriará en función de esta temperatura. Si el valor es 0, el calentamiento del extremo caliente se desactivará."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Temperatura actual de este extremo caliente."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "Temperatura a la que se va a precalentar el extremo caliente."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Precalentar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Caliente el extremo caliente antes de imprimir. Puede continuar ajustando la impresión durante el calentamiento, así no tendrá que esperar a que el extremo caliente se caliente para poder imprimir."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Color del material en este extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Material en este extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "Tobera insertada en este extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "La impresora no está conectada."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Este ajuste tiene un valor distinto del perfil.\n"
+"\n"
+"Haga clic para restaurar el valor del perfil."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Placa de impresión"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "Temperatura objetivo de la plataforma calentada. La plataforma se calentará o enfriará en función de esta temperatura. Si el valor es 0, el calentamiento de la plataforma se desactivará."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "Temperatura actual de la plataforma caliente."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "Temperatura a la que se va a precalentar la plataforma."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Caliente la plataforma antes de imprimir. Puede continuar ajustando la impresión durante el calentamiento, así no tendrá que esperar a que la plataforma se caliente para poder imprimir."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Iniciar sesión"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Añada perfiles de materiales y complementos del Marketplace \n"
-"- Realice copias de seguridad y sincronice los perfiles y complementos de sus materiales \n"
-"- Comparta ideas y obtenga ayuda de más de 48 000 usuarios de la comunidad Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Cree una cuenta gratuita de Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Última actualización: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Cuenta de Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Cerrar sesión"
+"Este ajuste se calcula normalmente pero actualmente tiene un valor absoluto establecido.\n"
+"\n"
+"Haga clic para restaurar el valor calculado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Comprobando..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Cuenta sincronizada"
+msgid "Active print"
+msgstr "Activar impresión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Se ha producido un error..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Instalar actualizaciones pendientes"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Buscar actualizaciones de la cuenta"
+msgid "Job Name"
+msgstr "Nombre del trabajo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Sin título"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tiempo de impresión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "No hay elementos para seleccionar"
+msgid "Estimated time left"
+msgstr "Tiempo restante estimado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mostrar Guía de resolución de problemas en línea"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Alternar pantalla completa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Salir de modo de pantalla completa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "Des&hacer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Rehacer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Salir"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "Vista en 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Vista frontal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Vista superior"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Vista inferior"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Vista del lado izquierdo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Vista del lado derecho"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Configurar Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Agregar impresora..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Adm&inistrar impresoras ..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Administrar materiales..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Añadir más materiales de Marketplace"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Actualizar perfil con ajustes o sobrescrituras actuales"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Descartar cambios actuales"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&Crear perfil a partir de ajustes o sobrescrituras actuales..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Administrar perfiles..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Mostrar &documentación en línea"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Informar de un &error"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Novedades"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Acerca de..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Eliminar selección"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Centrar selección"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Multiplicar selección"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Eliminar modelo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Ce&ntrar modelo en plataforma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "A&grupar modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Desagrupar modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "Co&mbinar modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Multiplicar modelo..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Seleccionar todos los modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Borrar placa de impresión"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Recargar todos los modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Organizar todos los modelos en todas las placas de impresión"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Organizar todos los modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Organizar selección"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Restablecer las posiciones de todos los modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Restablecer las transformaciones de todos los modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Abrir archivo(s)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Nuevo proyecto..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Mostrar carpeta de configuración"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configurar visibilidad de los ajustes..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marketplace"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Este ajuste no se utiliza porque los ajustes a los que afecta están sobrescritos."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Afecta a"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Afectado por"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Este ajuste siempre se comparte entre extrusores. Si lo modifica, modificará el valor de todos los extrusores."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Este valor se resuelve a partir de valores en conflicto específicos del extrusor:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Este ajuste tiene un valor distinto del perfil.\n"
-"\n"
-"Haga clic para restaurar el valor del perfil."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Este ajuste se calcula normalmente pero actualmente tiene un valor absoluto establecido.\n"
-"\n"
-"Haga clic para restaurar el valor calculado."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Buscar ajustes"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copiar valor en todos los extrusores"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copiar todos los valores cambiados en todos los extrusores"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Ocultar este ajuste"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "No mostrar este ajuste"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Mostrar este ajuste"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Algunos ajustes ocultos utilizan valores diferentes de los valores normales calculados.\n"
-"\n"
-"Haga clic para mostrar estos ajustes."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Este paquete se instalará después de reiniciar."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Ajustes"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Cerrando %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "¿Seguro que desea salir de %1?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Instalar paquete"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Vista en 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Abrir archivo(s)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Vista frontal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Hemos encontrado uno o más archivos de GCode entre los archivos que ha seleccionado. Solo puede abrir los archivos GCode de uno en uno. Si desea abrir un archivo GCode, seleccione solo uno."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Vista superior"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Agregar impresora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Vista del lado izquierdo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Novedades"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Vista del lado derecho"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Proporciona los ajustes por modelo."
+msgid "Provides a prepare stage in Cura."
+msgstr "Proporciona una fase de preparación en Cura."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Herramienta de ajustes por modelo"
+msgid "Prepare Stage"
+msgstr "Fase de preparación"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Proporciona asistencia para la importación de perfiles de Cura."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Proporciona asistencia para exportar perfiles de Cura."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Lector de perfiles de Cura"
+msgid "Cura Profile Writer"
+msgstr "Escritor de perfiles de Cura"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Proporciona asistencia para leer archivos X3D."
+msgid "Provides support for reading model files."
+msgstr "Proporciona asistencia para leer archivos 3D."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "Lector de X3D"
+msgid "Trimesh Reader"
+msgstr "Lector Trimesh"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Realice una copia de seguridad de su configuración y restáurela."
+msgid "Checks for firmware updates."
+msgstr "Busca actualizaciones de firmware."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Copias de seguridad de Cura"
+msgid "Firmware Update Checker"
+msgstr "Buscador de actualizaciones de firmware"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Permite cambiar los ajustes de la máquina (como el volumen de impresión, el tamaño de la tobera, etc.)."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Registra determinados eventos para que puedan utilizarse en el informe del accidente"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Acción Ajustes de la máquina"
+msgid "Sentry Logger"
+msgstr "Registro de Sentry"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Crea una malla de borrado que impide la impresión de soportes en determinados lugares"
+msgid "Provides a monitor stage in Cura."
+msgstr "Proporciona una fase de supervisión en Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Borrador de soporte"
+msgid "Monitor Stage"
+msgstr "Fase de supervisión"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5994,105 +5985,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Complemento de dispositivo de salida de unidad extraíble"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Proporciona opciones a la máquina para actualizar el firmware."
+msgid "Provides support for reading AMF files."
+msgstr "Proporciona asistencia para leer archivos AMF."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Actualizador de firmware"
+msgid "AMF Reader"
+msgstr "Lector de AMF"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Proporciona asistencia para la importación de perfiles de versiones anteriores de Cura."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Proporciona soporte para la lectura de paquetes de formato Ultimaker."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lector de perfiles antiguos de Cura"
+msgid "UFP Reader"
+msgstr "Lector de UFP"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Proporciona asistencia para leer archivos 3MF."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Se conecta a la biblioteca digital, por lo que Cura puede abrir y guardar archivos en ella."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Lector de 3MF"
+msgid "Ultimaker Digital Library"
+msgstr "Ultimaker Digital Library"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Permite la escritura de paquetes de formato Ultimaker."
+msgid "Provides the Per Model Settings."
+msgstr "Proporciona los ajustes por modelo."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "Escritor de UFP"
+msgid "Per Model Settings Tool"
+msgstr "Herramienta de ajustes por modelo"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Registra determinados eventos para que puedan utilizarse en el informe del accidente"
+msgid "Provides a machine actions for updating firmware."
+msgstr "Proporciona opciones a la máquina para actualizar el firmware."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Registro de Sentry"
+msgid "Firmware Updater"
+msgstr "Actualizador de firmware"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Proporciona asistencia para la importación de perfiles de archivos GCode."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Gestiona las conexiones de red de las impresoras Ultimaker conectadas."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Lector de perfiles GCode"
+msgid "Ultimaker Network Connection"
+msgstr "Conexión en red de Ultimaker"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Proporciona una fase de vista previa en Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Comprueba las configuraciones de los modelos y la impresión en busca de posibles problemas de impresión y da consejos."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Fase de vista previa"
+msgid "Model Checker"
+msgstr "Comprobador de modelos"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Proporciona la vista de rayos X."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Vista de rayos X"
+msgid "Simulation View"
+msgstr "Vista de simulación"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Proporciona el vínculo para el backend de segmentación de CuraEngine."
+msgid "Writes g-code to a file."
+msgstr "Escribe GCode en un archivo."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Backend de CuraEngine"
+msgid "G-code Writer"
+msgstr "Escritor de GCode"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Proporciona asistencia para leer archivos AMF."
+msgid "Provides support for writing 3MF files."
+msgstr "Proporciona asistencia para escribir archivos 3MF."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Lector de AMF"
+msgid "3MF Writer"
+msgstr "Escritor de 3MF"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6104,175 +6095,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Lector de GCode comprimido"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Extensión que permite el posprocesamiento de las secuencias de comandos creadas por los usuarios"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Permite leer y escribir perfiles de material basados en XML."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Posprocesamiento"
+msgid "Material Profiles"
+msgstr "Perfiles de material"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Proporciona asistencia para exportar perfiles de Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Proporciona el vínculo para el backend de segmentación de CuraEngine."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Escritor de perfiles de Cura"
+msgid "CuraEngine Backend"
+msgstr "Backend de CuraEngine"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Acepta GCode y lo envía a una impresora. El complemento también puede actualizar el firmware."
+msgid "Provides support for reading X3D files."
+msgstr "Proporciona asistencia para leer archivos X3D."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Impresión USB"
+msgid "X3D Reader"
+msgstr "Lector de X3D"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Proporciona una fase de preparación en Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Habilita la capacidad de generar geometría imprimible a partir de archivos de imagen 2D."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Fase de preparación"
+msgid "Image Reader"
+msgstr "Lector de imágenes"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Permite cargar y visualizar archivos GCode."
+msgid "Provides support for reading 3MF files."
+msgstr "Proporciona asistencia para leer archivos 3MF."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Lector de GCode"
+msgid "3MF Reader"
+msgstr "Lector de 3MF"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Habilita la capacidad de generar geometría imprimible a partir de archivos de imagen 2D."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Permite la escritura de paquetes de formato Ultimaker."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Lector de imágenes"
+msgid "UFP Writer"
+msgstr "Escritor de UFP"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Proporciona las acciones de la máquina de las máquinas Ultimaker (como un asistente para la nivelación de la plataforma, la selección de actualizaciones, etc.)."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Proporciona asistencia para la importación de perfiles de versiones anteriores de Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Acciones de la máquina Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lector de perfiles antiguos de Cura"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Escribe GCode en un archivo comprimido."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Actualiza la configuración de Cura 4.3 a Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Escritor de GCode comprimido"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Actualización de la versión 4.3 a la 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Busca actualizaciones de firmware."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Actualiza las configuraciones de Cura 2.1 a Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Buscador de actualizaciones de firmware"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Actualización de la versión 2.1 a la 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Envía información anónima de la segmentación. Se puede desactivar en las preferencias."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Actualiza la configuración de Cura 4.1 a Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Info de la segmentación"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Actualización de la versión 4.1 a la 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Permite leer y escribir perfiles de material basados en XML."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Perfiles de material"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Se conecta a la biblioteca digital, por lo que Cura puede abrir y guardar archivos en ella."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Actualiza la configuración de Cura 4.5 a Cura 4.6."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Ultimaker Digital Library"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Actualización de la versión 4.5 a la 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Buscar, administrar e instalar nuevos paquetes de Cura."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Actualiza la configuración de Cura 3.3 a Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Cuadro de herramientas"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Actualización de la versión 3.3 a la 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Escribe GCode en un archivo."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Actualiza la configuración de Cura 4.8 a Cura 4.9."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Escritor de GCode"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "Actualización de la versión 4.8 a la 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Abre la vista de simulación."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Actualiza la configuración de Cura 2.7 a Cura 3.0."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Vista de simulación"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Actualización de la versión 2.7 a la 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Actualiza la configuración de Cura 4.5 a Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Actualiza la configuración de Cura 4.4 a Cura 4.5."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Actualización de la versión 4.5 a la 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Actualización de la versión 4.4 a la 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Actualiza la configuración de Cura 2.5 a Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Actualiza la configuración de Cura 3.0 a Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Actualización de la versión 2.5 a la 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Actualización de la versión 3.0 a la 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6284,115 +6275,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "Actualización de la versión 4.6.0 a la 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Actualiza la configuración de Cura 4.7 a Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Actualiza la configuración de Cura 2.6 a Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Actualización de la versión 4.7 a la 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Actualización de la versión 2.6 a la 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Actualiza las configuraciones de Cura 3.4 a Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Actualiza la configuración de Cura 4.2 a Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Actualización de la versión 3.4 a la 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Actualización de la versión 4.2 a la 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Actualiza las configuraciones de Cura 2.1 a Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Actualiza la configuración de Cura 4.0 a Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Actualización de la versión 2.1 a la 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Actualización de la versión 4.0 a la 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Actualiza la configuración de Cura 3.2 a Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Actualiza la configuración de Cura 4.6.2 a Cura 4.7."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Actualización de la versión 3.2 a la 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Actualización de la versión 4.6.2 a la 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Actualiza la configuración de Cura 4.8 a Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Actualiza la configuración de Cura 4.9 a Cura 4.10."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "Actualización de la versión 4.8 a la 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "Actualización de la versión 4.9 a la 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Actualiza la configuración de Cura 4.6.2 a Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Actualiza la configuración de Cura 2.2 a Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Actualización de la versión 4.6.2 a la 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Actualización de la versión 2.2 a la 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Actualiza la configuración de Cura 4.2 a Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Actualiza la configuración de Cura 3.2 a Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Actualización de la versión 4.2 a la 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Actualización de la versión 3.2 a la 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Actualiza la configuración de Cura 4.3 a Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Actualiza la configuración de Cura 2.5 a Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Actualización de la versión 4.3 a la 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Actualización de la versión 2.5 a la 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Actualiza la configuración de Cura 4.9 a Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Actualiza la configuración de Cura 3.5 a Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "Actualización de la versión 4.9 a la 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Actualización de la versión 3.5 a la 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Actualiza la configuración de Cura 2.7 a Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Actualiza las configuraciones de Cura 3.4 a Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Actualización de la versión 2.7 a la 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Actualización de la versión 3.4 a la 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Actualiza la configuración de Cura 2.6 a Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Actualiza la configuración de Cura 4.7 a Cura 4.8."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Actualización de la versión 2.6 a la 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Actualización de la versión 4.7 a la 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6404,105 +6395,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "Actualización de la versión 4.11 a 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Actualiza la configuración de Cura 3.3 a Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Realice una copia de seguridad de su configuración y restáurela."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Actualización de la versión 3.3 a la 3.4"
+msgid "Cura Backups"
+msgstr "Copias de seguridad de Cura"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Actualiza la configuración de Cura 3.0 a Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Proporciona asistencia para la importación de perfiles de Cura."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Actualización de la versión 3.0 a la 3.1"
+msgid "Cura Profile Reader"
+msgstr "Lector de perfiles de Cura"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Actualiza la configuración de Cura 4.0 a Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Envía información anónima de la segmentación. Se puede desactivar en las preferencias."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Actualización de la versión 4.0 a la 4.1"
+msgid "Slice info"
+msgstr "Info de la segmentación"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Actualiza la configuración de Cura 4.4 a Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Proporciona asistencia para la importación de perfiles de archivos GCode."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Actualización de la versión 4.4 a la 4.5"
+msgid "G-code Profile Reader"
+msgstr "Lector de perfiles GCode"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Actualiza la configuración de Cura 2.2 a Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "Escribe GCode en un archivo comprimido."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Actualización de la versión 2.2 a la 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Escritor de GCode comprimido"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Actualiza la configuración de Cura 4.1 a Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Extensión que permite el posprocesamiento de las secuencias de comandos creadas por los usuarios"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Actualización de la versión 4.1 a la 4.2"
+msgid "Post Processing"
+msgstr "Posprocesamiento"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Actualiza la configuración de Cura 3.5 a Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Crea una malla de borrado que impide la impresión de soportes en determinados lugares"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Actualización de la versión 3.5 a la 4.0"
+msgid "Support Eraser"
+msgstr "Borrador de soporte"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Gestiona las conexiones de red de las impresoras Ultimaker conectadas."
+msgid "Provides a preview stage in Cura."
+msgstr "Proporciona una fase de vista previa en Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Conexión en red de Ultimaker"
+msgid "Preview Stage"
+msgstr "Fase de vista previa"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Proporciona asistencia para leer archivos 3D."
+msgid "Provides the X-Ray view."
+msgstr "Proporciona la vista de rayos X."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Lector Trimesh"
+msgid "X-Ray View"
+msgstr "Vista de rayos X"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Proporciona soporte para la lectura de paquetes de formato Ultimaker."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Proporciona las acciones de la máquina de las máquinas Ultimaker (como un asistente para la nivelación de la plataforma, la selección de actualizaciones, etc.)."
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Lector de UFP"
+msgid "Ultimaker machine actions"
+msgstr "Acciones de la máquina Ultimaker"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6514,35 +6515,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Vista de sólidos"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Proporciona asistencia para escribir archivos 3MF."
+msgid "Allows loading and displaying G-code files."
+msgstr "Permite cargar y visualizar archivos GCode."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Escritor de 3MF"
+msgid "G-code Reader"
+msgstr "Lector de GCode"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Proporciona una fase de supervisión en Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Permite cambiar los ajustes de la máquina (como el volumen de impresión, el tamaño de la tobera, etc.)."
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Fase de supervisión"
+msgid "Machine Settings Action"
+msgstr "Acción Ajustes de la máquina"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Comprueba las configuraciones de los modelos y la impresión en busca de posibles problemas de impresión y da consejos."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Acepta GCode y lo envía a una impresora. El complemento también puede actualizar el firmware."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Comprobador de modelos"
+msgid "USB printing"
+msgstr "Impresión USB"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Sincronizar materiales"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "Tiene que salir y reiniciar {} para que los cambios surtan efecto."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "Sincronizando..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Se han detectado cambios desde su cuenta de Ultimaker"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "¿Desea sincronizar el material y los paquetes de software con su cuenta?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Sincronizar"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Rechazar y eliminar de la cuenta"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "Error al descargar los complementos {}"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Acuerdo de licencia de complemento"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Convertir imagen..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "La anchura en milímetros en la placa de impresión."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Marketplace"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "Tendrá que reiniciar Cura para que los cambios de los paquetes surtan efecto."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Instalar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Instalado"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Prémium"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Ir a Web Marketplace"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Buscar materiales"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Compatibilidad"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Máquina"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Placa de impresión"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Soporte"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Calidad"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Especificaciones técnicas"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Especificaciones de seguridad"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Directrices de impresión"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Sitio web"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "<a href='%1'>Inicie sesión</a> para realizar la instalación o la actualización"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href=”%1”>Comprar bobinas de material</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Actualizar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Actualizando"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Actualizado"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Atrás"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Complementos"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Instalado"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Se instalará después de reiniciar"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "<a href='%1'>Inicie sesión</a> para realizar la actualización"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Degradar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Desinstalar"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Contribuciones de la comunidad"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Complementos de la comunidad"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Materiales genéricos"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Buscando paquetes..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Sitio web"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "Correo electrónico"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Inicie sesión para obtener complementos y materiales verificados para Ultimaker Cura Enterprise"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Versión"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Última actualización"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Descargas"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Complementos instalados"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "No se ha instalado ningún complemento."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Materiales instalados"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "No se ha instalado ningún material."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Complementos agrupados"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Materiales agrupados"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "No se ha podido conectar con la base de datos del Paquete Cura. Compruebe la conexión."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "Tiene que aceptar la licencia para instalar el paquete"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Cambios desde su cuenta"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Descartar"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "Se añadirán los siguientes paquetes:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "Los siguientes paquetes no se pueden instalar debido a una versión no compatible de Cura:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Confirmar desinstalación"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Va a desinstalar materiales o perfiles que todavía están en uso. Si confirma la desinstalación, los siguientes materiales o perfiles volverán a sus valores predeterminados."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Materiales"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Perfiles"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Confirmar"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Algunos elementos pueden causar problemas durante la impresión. Haga clic para ver consejos sobre cómo ajustarlos."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Biblioteca de compatibilidad para trabajar con objetos planos"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "Ha personalizado algunos ajustes del perfil.\n"
+#~ "¿Le gustaría mantener estos ajustes cambiados después de cambiar de perfil?\n"
+#~ "También puede descartar los cambios para cargar los valores predeterminados de'%1'."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "P&laca de impresión"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Crear"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Duplicado"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Impresora: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Actualizar perfil con ajustes o sobrescrituras actuales"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Tema:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Tendrá que reiniciar la aplicación para que estos cambios tengan efecto."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Más información"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Crear"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Sincronizar con las impresoras"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Impresora"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Unidad"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Mostrar Guía de resolución de problemas en línea"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Añadir más materiales de Marketplace"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Organizar todos los modelos en todas las placas de impresión"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Marketplace"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Buscar, administrar e instalar nuevos paquetes de Cura."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Cuadro de herramientas"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Abre la vista de simulación."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/es_ES/fdmextruder.def.json.po b/resources/i18n/es_ES/fdmextruder.def.json.po
index b281d5a778..6e25833577 100644
--- a/resources/i18n/es_ES/fdmextruder.def.json.po
+++ b/resources/i18n/es_ES/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Spanish\n"
diff --git a/resources/i18n/es_ES/fdmprinter.def.json.po b/resources/i18n/es_ES/fdmprinter.def.json.po
index 2c56a713c6..448d48b844 100644
--- a/resources/i18n/es_ES/fdmprinter.def.json.po
+++ b/resources/i18n/es_ES/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:15+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Spanish <info@lionbridge.com>, Spanish <info@bothof.nl>\n"
@@ -56,7 +56,9 @@ msgctxt "machine_start_gcode description"
 msgid ""
 "G-code commands to be executed at the very start - separated by \n"
 "."
-msgstr "Los comandos de GCode que se ejecutarán justo al inicio - separados por \n."
+msgstr ""
+"Los comandos de GCode que se ejecutarán justo al inicio - separados por \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
@@ -68,7 +70,9 @@ msgctxt "machine_end_gcode description"
 msgid ""
 "G-code commands to be executed at the very end - separated by \n"
 "."
-msgstr "Los comandos de GCode que se ejecutarán justo al final - separados por \n."
+msgstr ""
+"Los comandos de GCode que se ejecutarán justo al final - separados por \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "material_guid label"
@@ -462,8 +466,8 @@ msgstr "Polígono del cabezal de la máquina y del ventilador"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "Silueta 2D del cabezal de impresión (incluidas las tapas del ventilador)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -736,6 +740,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "El diámetro de la rueda que dirige el material hacia el alimentador."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Calidad"
@@ -956,6 +970,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Número de paredes. Al calcularlo por el grosor de las paredes, este valor se redondea a un número entero."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Distancia de pasada de la pared exterior"
@@ -986,14 +1050,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Optimizar el orden en el que se imprimen las paredes a fin de reducir el número de retracciones y la distancia recorrida. La mayoría de los componentes se beneficiarán si este ajuste está habilitado pero, en algunos casos, se puede tardar más, por lo que deben compararse las previsiones de tiempo de impresión con y sin optimización. La primera capa no está optimizada al elegir el borde como el tipo de adhesión de la placa de impresión."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Paredes exteriores antes que interiores"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Cuando está activado, imprime las paredes de fuera hacia dentro. Este ajuste puede mejorar la precisión dimensional en las direcciones X e Y si se utiliza un plástico de alta viscosidad como el ABS. Sin embargo, puede reducir la calidad de impresión de la superficie exterior, especialmente en voladizos."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1006,94 +1080,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Imprime una pared adicional cada dos capas. De este modo el relleno se queda atrapado entre estas paredes adicionales, lo que da como resultado impresiones más sólidas."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Compensar superposiciones de pared"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Compensa el flujo en partes de una pared que se están imprimiendo dónde ya hay una pared."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Compensar superposiciones de pared exterior"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Compensa el flujo en partes de una pared exterior que se están imprimiendo donde ya hay una pared."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Compensar superposiciones de pared interior"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Compensa el flujo en partes de una pared interior que se están imprimiendo donde ya hay una pared."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Flujo de pared mínimo"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Porcentaje mínimo de flujo permitido en una línea de pared. La compensación de superposición reduce el flujo de pared cuando se coloca cerca de otra pared. Las paredes con flujos inferiores a este valor se sustituirán con un movimiento de desplazamiento. Al utilizar este ajuste debe habilitar la compensación de superposición de pared e imprimir la pared exterior antes que las interiores."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Preferencia de retracción"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Si se habilita esta opción, se utilizará retracción en lugar de peinada para los movimientos de desplazamiento que sustituyen las paredes cuyo flujo está por debajo de los límites mínimos de flujo."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Rellenar espacios entre paredes"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Rellena espacios entre paredes en los que no encaja ninguna pared."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "En ningún sitio"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Imprimir paredes finas"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "En todas partes"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Imprime las piezas del modelo que son horizontalmente más finas que el tamaño de la tobera."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Filtrar pequeños huecos"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Filtrar pequeños huecos para reducir las gotas en la parte externa del modelo."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Imprimir paredes finas"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Imprime las piezas del modelo que son horizontalmente más finas que el tamaño de la tobera."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -1728,10 +1792,7 @@ msgstr "Patrón de relleno"
 #: fdmprinter.def.json
 msgctxt "infill_pattern description"
 msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object."
-msgstr "Patrón del material de relleno de la impresión. El método de llenado en línea y en zigzag cambia de dirección en capas alternas para reducir los costes"
-" de material. Los patrones de rejilla, triángulo, trihexágono, cubo, octaédrico, cubo bitruncado, transversal y concéntrico se imprimen en todas las capas"
-" por completo. Los rellenos de giroide, cúbico, cúbico bitruncado y octaédrico se alternan en cada capa para lograr una distribución más uniforme de la"
-" fuerza en todas las direcciones. El relleno de iluminación intenta minimizar el relleno apoyando solo la parte superior del objeto."
+msgstr "Patrón del material de relleno de la impresión. El método de llenado en línea y en zigzag cambia de dirección en capas alternas para reducir los costes de material. Los patrones de rejilla, triángulo, trihexágono, cubo, octaédrico, cubo bitruncado, transversal y concéntrico se imprimen en todas las capas por completo. Los rellenos de giroide, cúbico, cúbico bitruncado y octaédrico se alternan en cada capa para lograr una distribución más uniforme de la fuerza en todas las direcciones. El relleno de iluminación intenta minimizar el relleno apoyando solo la parte superior del objeto."
 
 #: fdmprinter.def.json
 msgctxt "infill_pattern option grid"
@@ -2055,8 +2116,7 @@ msgstr "Ángulo de enderezamiento de iluminación"
 #: fdmprinter.def.json
 msgctxt "lightning_infill_straightening_angle description"
 msgid "The infill lines are straightened out to save on printing time. This is the maximum angle of overhang allowed across the length of the infill line."
-msgstr "Las líneas de relleno se simplifican para ahorrar tiempo al imprimir. Este es el ángulo máximo permitido del voladizo sobre la longitud de la línea de"
-" relleno."
+msgstr "Las líneas de relleno se simplifican para ahorrar tiempo al imprimir. Este es el ángulo máximo permitido del voladizo sobre la longitud de la línea de relleno."
 
 #: fdmprinter.def.json
 msgctxt "material label"
@@ -2199,6 +2259,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Para compensar la contracción del material a medida que se enfría, el modelo se escala con este factor."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Material cristalino"
@@ -2709,24 +2789,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "Las primeras capas se imprimen más lentamente que el resto del modelo para obtener una mejor adhesión a la placa de impresión y mejorar la tasa de éxito global de las impresiones. La velocidad aumenta gradualmente en estas capas."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Igualar flujo de filamentos"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Imprimir las líneas finas más rápido que las normales de modo que la cantidad de material rezumado por segundo no varíe. Puede ser necesario que las partes finas del modelo se impriman con un ancho de línea más pequeño que el definido en los ajustes. Este ajuste controla los cambios de velocidad de dichas líneas."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Velocidad máxima de igualación de flujo"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Velocidad de impresión máxima cuando se ajusta la velocidad de impresión para igualar el flujo."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4464,6 +4534,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "El tren extrusor que se utiliza para imprimir la falda/borde/balsa. Se emplea en la extrusión múltiple."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Recuento de líneas de falda"
@@ -4628,6 +4738,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "Distancia entre las líneas de la balsa para las capas superiores de la balsa. La separación debe ser igual a la ancho de línea para producir una superficie sólida."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Grosor intermedio de la balsa"
@@ -5128,6 +5248,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "La desviación máxima permitida al reducir la resolución en el ajuste de la resolución máxima. Si se aumenta el valor, la impresión será menos precisa pero el GCode será más pequeño. La desviación máxima es un límite para la resolución máxima, por lo que si las dos entran en conflicto, la desviación máxima siempre tendrá prioridad."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Modos especiales"
@@ -6422,6 +6552,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "Las pequeñas partes de la primera capa se imprimirán a este porcentaje de su velocidad de impresión normal. Una impresión más lenta puede mejorar la adhesión y la precisión."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Ajustes de la línea de comandos"
@@ -6481,6 +6641,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matriz de transformación que se aplicará al modelo cuando se cargue desde el archivo."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "Silueta 2D del cabezal de impresión (incluidas las tapas del ventilador)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Paredes exteriores antes que interiores"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Cuando está activado, imprime las paredes de fuera hacia dentro. Este ajuste puede mejorar la precisión dimensional en las direcciones X e Y si se utiliza un plástico de alta viscosidad como el ABS. Sin embargo, puede reducir la calidad de impresión de la superficie exterior, especialmente en voladizos."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Compensar superposiciones de pared"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Compensa el flujo en partes de una pared que se están imprimiendo dónde ya hay una pared."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Compensar superposiciones de pared exterior"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Compensa el flujo en partes de una pared exterior que se están imprimiendo donde ya hay una pared."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Compensar superposiciones de pared interior"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Compensa el flujo en partes de una pared interior que se están imprimiendo donde ya hay una pared."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Flujo de pared mínimo"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Porcentaje mínimo de flujo permitido en una línea de pared. La compensación de superposición reduce el flujo de pared cuando se coloca cerca de otra pared. Las paredes con flujos inferiores a este valor se sustituirán con un movimiento de desplazamiento. Al utilizar este ajuste debe habilitar la compensación de superposición de pared e imprimir la pared exterior antes que las interiores."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Preferencia de retracción"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Si se habilita esta opción, se utilizará retracción en lugar de peinada para los movimientos de desplazamiento que sustituyen las paredes cuyo flujo está por debajo de los límites mínimos de flujo."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Rellenar espacios entre paredes"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Rellena espacios entre paredes en los que no encaja ninguna pared."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "En ningún sitio"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "En todas partes"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Filtrar pequeños huecos"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Filtrar pequeños huecos para reducir las gotas en la parte externa del modelo."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Igualar flujo de filamentos"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Imprimir las líneas finas más rápido que las normales de modo que la cantidad de material rezumado por segundo no varíe. Puede ser necesario que las partes finas del modelo se impriman con un ancho de línea más pequeño que el definido en los ajustes. Este ajuste controla los cambios de velocidad de dichas líneas."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Velocidad máxima de igualación de flujo"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Velocidad de impresión máxima cuando se ajusta la velocidad de impresión para igualar el flujo."
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "Los comandos de GCode que se ejecutarán justo al inicio separados por - \\n."
diff --git a/resources/i18n/fdmextruder.def.json.pot b/resources/i18n/fdmextruder.def.json.pot
index 2d127a3742..47567dd264 100644
--- a/resources/i18n/fdmextruder.def.json.pot
+++ b/resources/i18n/fdmextruder.def.json.pot
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot
index 5482032204..d823cd20a2 100644
--- a/resources/i18n/fdmprinter.def.json.pot
+++ b/resources/i18n/fdmprinter.def.json.pot
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -508,7 +508,10 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
+msgid ""
+"The shape of the print head. These are coordinates relative to the position "
+"of the print head, which is usually the position of its first extruder. The "
+"dimensions left and in front of the print head must be negative coordinates."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -805,6 +808,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr ""
@@ -1049,6 +1062,75 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid ""
+"When transitioning between different numbers of walls as the part becomes "
+"thinner, a certain amount of space is allotted to split or join the wall "
+"lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid ""
+"The number of walls, counted from the center, over which the variation needs "
+"to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid ""
+"When to create transitions between even and odd numbers of walls. A wedge "
+"shape with an angle greater than this setting will not have transitions and "
+"no walls will be printed in the center to fill the remaining space. Reducing "
+"this setting reduces the number and length of these center walls, but may "
+"leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid ""
+"If it would be transitioning back and forth between different numbers of "
+"walls in quick succession, don't transition at all. Remove transitions if "
+"they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid ""
+"Prevent transitioning back and forth between one extra wall and one less. "
+"This margin extends the range of line widths which follow to [Minimum Wall "
+"Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this "
+"margin reduces the number of transitions, which reduces the number of "
+"extrusion starts/stops and travel time. However, large line width variation "
+"can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr ""
@@ -1090,134 +1172,160 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
+msgctxt "inset_direction description"
 msgid ""
-"Prints walls in order of outside to inside when enabled. This can help "
-"improve dimensional accuracy in X and Y when using a high viscosity plastic "
-"like ABS; however it can decrease outer surface print quality, especially on "
-"overhangs."
+"Determines the order in which walls are printed. Printing outer walls "
+"earlier helps with dimensional accuracy, as faults from inner walls cannot "
+"propagate to the outside. However printing them later allows them to stack "
+"better when overhangs are printed."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "alternate_extra_perimeter label"
-msgid "Alternate Extra Wall"
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "alternate_extra_perimeter description"
-msgid ""
-"Prints an extra wall at every other layer. This way infill gets caught "
-"between these extra walls, resulting in stronger prints."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
+msgctxt "alternate_extra_perimeter label"
+msgid "Alternate Extra Wall"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
+msgctxt "alternate_extra_perimeter description"
 msgid ""
-"Compensate the flow for parts of a wall being printed where there is already "
-"a wall in place."
+"Prints an extra wall at every other layer. This way infill gets caught "
+"between these extra walls, resulting in stronger prints."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+msgctxt "min_wall_line_width description"
 msgid ""
-"Compensate the flow for parts of an outer wall being printed where there is "
-"already a wall in place."
+"For thin structures around once or twice the nozzle size, the line widths "
+"need to be altered to adhere to the thickness of the model. This setting "
+"controls the minimum line width allowed for the walls. The minimum line "
+"widths inherently also determine the maximum line widths, since we "
+"transition from N to N+1 walls at some geometry thickness where the N walls "
+"are wide and the N+1 walls are narrow. The widest possible wall line is "
+"twice the Minimum Wall Line Width."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+msgctxt "min_even_wall_line_width description"
 msgid ""
-"Compensate the flow for parts of an inner wall being printed where there is "
-"already a wall in place."
+"The minimum line width for normal polygonal walls. This setting determines "
+"at which model thickness we switch from printing a single thin wall line, to "
+"printing two wall lines. A higher Minimum Even Wall Line Width leads to a "
+"higher maximum odd wall line width. The maximum even wall line width is "
+"calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
+msgctxt "wall_split_middle_threshold description"
 msgid ""
-"Minimum allowed percentage flow for a wall line. The wall overlap "
-"compensation reduces a wall's flow when it lies close to an existing wall. "
-"Walls whose flow is less than this value will be replaced with a travel "
-"move. When using this setting, you must enable the wall overlap compensation "
-"and print the outer wall before inner walls."
+"The smallest line width, as a factor of the normal line width, above which "
+"the middle line (if there is one) will be split into two. Reduce this "
+"setting to use more, thinner lines. Increase to use fewer, wider lines. Note "
+"that this applies -as if- the entire shape should be filled with wall, so "
+"the middle here refers to the middle of the object between two outer edges "
+"of the shape, even if there actually is fill or (other) skin in the print "
+"instead of wall."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
+msgctxt "min_odd_wall_line_width description"
 msgid ""
-"If enabled, retraction is used rather than combing for travel moves that "
-"replace walls whose flow is below the minimum flow threshold."
+"The minimum line width for middle line gap filler polyline walls. This "
+"setting determines at which model thickness we switch from printing two wall "
+"lines, to printing two outer walls and a single central wall in the middle. "
+"A higher Minimum Odd Wall Line Width leads to a higher maximum even wall "
+"line width. The maximum odd wall line width is calculated as 2 * Minimum "
+"Even Wall Line Width,"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
+msgctxt "wall_add_middle_threshold description"
+msgid ""
+"The smallest line width, as a factor of the normal line width, above which a "
+"middle line (if there wasn't one already) will be added. Reduce this setting "
+"to use more, thinner lines. Increase to use fewer, wider lines. Note that "
+"this applies -as if- the entire shape should be filled with wall, so the "
+"middle here refers to the middle of the object between two outer edges of "
+"the shape, even if there actually is fill or (other) skin in the print "
+"instead of wall."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
+msgctxt "fill_outline_gaps description"
+msgid ""
+"Print pieces of the model which are horizontally thinner than the nozzle "
+"size."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
+msgctxt "min_feature_size description"
+msgid ""
+"Minimum thickness of thin features. Model features that are thinner than "
+"this value will not be printed, while features thicker than the Minimum "
+"Feature Size will be widened to the Minimum Wall Line Width."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
+msgctxt "min_bead_width description"
 msgid ""
-"Print pieces of the model which are horizontally thinner than the nozzle "
-"size."
+"Width of the wall that will replace thin features (according to the Minimum "
+"Feature Size) of the model. If the Minimum Wall Line Width is thinner than "
+"the thickness of the feature, the wall will become as thick as the feature "
+"itself."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2536,6 +2644,30 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid ""
+"To compensate for the shrinkage of the material as it cools down, the model "
+"will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid ""
+"To compensate for the shrinkage of the material as it cools down, the model "
+"will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr ""
@@ -3112,28 +3244,19 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid ""
-"Print thinner than normal lines faster so that the amount of material "
-"extruded per second remains the same. Thin pieces in your model might "
-"require lines printed with smaller line width than provided in the settings. "
-"This setting controls the speed changes for such lines."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
+msgctxt "speed_equalize_flow_width_factor description"
 msgid ""
-"Maximum print speed when adjusting the print speed in order to equalize flow."
+"Extrusion width based correction factor on the speed. At 0% the movement "
+"speed is kept constant at the Print Speed. At 100% the movement speed is "
+"adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the "
+"normal Line Width are printed twice as fast and lines twice as wide are "
+"printed half as fast. A value larger than 100% can help to compensate for "
+"the higher pressure required to extrude wide lines."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5171,6 +5294,54 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid ""
+"The extruder train to use for printing the skirt or brim. This is used in "
+"multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid ""
+"The extruder train to use for printing the first layer of the raft. This is "
+"used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid ""
+"The extruder train to use for printing the middle layer of the raft. This is "
+"used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid ""
+"The extruder train to use for printing the top layer(s) of the raft. This is "
+"used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr ""
@@ -5374,6 +5545,19 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid ""
+"The number of layers between the base and the surface of the raft. These "
+"comprise the main thickness of the raft. Increasing this creates a thicker, "
+"sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr ""
@@ -5953,6 +6137,24 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid ""
+"The maximum extrusion area deviation allowed when removing intermediate "
+"points from a straight line. An intermediate point may serve as width-"
+"changing point in a long straight line. Therefore, if it is removed, it will "
+"cause the line to have a uniform width and, as a result, lose (or gain) a "
+"bit of extrusion area. If you increase this you may notice slight under- (or "
+"over-) extrusion in between straight parallel walls, as more intermediate "
+"width-changing points will be allowed to be removed. Your print will be less "
+"accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr ""
@@ -7506,6 +7708,40 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid ""
+"Alternate wall directions every other layer and inset. Useful for materials "
+"that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid ""
+"The number of contours to print around the linear pattern in the base layer "
+"of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr ""
diff --git a/resources/i18n/fi_FI/cura.po b/resources/i18n/fi_FI/cura.po
index e1e678109d..a46ac19a60 100644
--- a/resources/i18n/fi_FI/cura.po
+++ b/resources/i18n/fi_FI/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2017-09-27 12:27+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
@@ -15,3715 +15,3550 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura-profiili"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Päivitystietoja ei löytynyt."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Save to Removable Drive"
+msgstr "Tallenna siirrettävälle asemalle"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "Save to Removable Drive {0}"
+msgstr "Tallenna siirrettävälle asemalle {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Tulostustilavuuden korkeutta on vähennetty tulostusjärjestysasetuksen vuoksi, jotta koroke ei osuisi tulostettuihin malleihin."
+msgid "There are no file formats available to write with!"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#, python-brace-format
+msgctxt "@info:progress Don't translate the XML tags <filename>!"
+msgid "Saving to Removable Drive <filename>{0}</filename>"
+msgstr "Tallennetaan siirrettävälle asemalle <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Tulostustilavuus"
+msgid "Saving"
+msgstr "Tallennetaan"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Ei voitu tallentaa tiedostoon <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#, python-brace-format
+msgctxt "@info:status Don't translate the tag {device}!"
+msgid "Could not find a file name when trying to write to {device}."
+msgstr "Ei löydetty tiedostonimeä yritettäessä kirjoittaa laitteeseen {device}."
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Tuntematon"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Could not save to removable drive {0}: {1}"
+msgstr "Ei voitu tallentaa siirrettävälle asemalle {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Virhe"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Saved to Removable Drive {0} as {1}"
+msgstr "Tallennettu siirrettävälle asemalle {0} nimellä {1}"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+msgctxt "@info:title"
+msgid "File Saved"
+msgstr "Tiedosto tallennettu"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Mukautetut profiilit"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+msgctxt "@action:button"
+msgid "Eject"
+msgstr "Poista"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr ""
+msgctxt "@action"
+msgid "Eject removable device {0}"
+msgstr "Poista siirrettävä asema {0}"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
-msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Ejected {0}. You can now safely remove the drive."
+msgstr "Poistettu {0}. Voit nyt poistaa aseman turvallisesti."
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+msgctxt "@info:title"
+msgid "Safely Remove Hardware"
+msgstr "Poista laite turvallisesti"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Failed to eject {0}. Another program may be using the drive."
+msgstr "Kohteen {0} poistaminen epäonnistui. Asema saattaa olla toisen ohjelman käytössä."
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Varoitus"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Siirrettävä asema"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "AMF File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "Custom Material"
-msgstr "Mukautettu materiaali"
+msgid "Per Model Settings"
+msgstr "Mallikohtaiset asetukset"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Mukautettu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Määritä mallikohtaiset asetukset"
 
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Uusien paikkojen etsiminen kappaleille"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Etsitään paikkaa"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Kaikille kappaleille ei löydy paikkaa tulostustilavuudessa."
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Paikkaa ei löydy"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
+msgctxt "@info:status"
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+msgctxt "@info:title"
+msgid "Not a group host"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+msgctxt "@info:status"
+msgid "Sending Print Job"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Ladataan laitteita..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+msgctxt "@info:status"
+msgid "Print job queue is full. The printer can't accept a new job."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+msgctxt "@info:status"
+msgid "Please wait until the current job has been sent."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Asetetaan näkymää..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Ladataan käyttöliittymää..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+msgctxt "@info:title"
+msgid "Print error"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Vain yksi G-code-tiedosto voidaan ladata kerralla. Tiedoston {0} tuonti ohitettiin."
+msgid "Print job was successfully sent to the printer."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Varoitus"
+msgid "Data Sent"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Muita tiedostoja ei voida ladata, kun G-code latautuu. Tiedoston {0} tuonti ohitettiin."
+msgid ""
+"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
+" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
-msgid "Error"
-msgstr "Virhe"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
+msgid "Are you ready for cloud printing?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Sulje"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+msgctxt "@action"
+msgid "Get started"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+msgctxt "@action"
+msgid "Learn more"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Lisää"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Peruuta"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Ulkoseinämä"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Sisäseinämät"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Tulosta verkon kautta"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Pintakalvo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+msgctxt "@properties:tooltip"
+msgid "Print over network"
+msgstr "Tulosta verkon kautta"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Täyttö"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+msgctxt "@info:status"
+msgid "Connected over the network"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Tuen täyttö"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Tukiliittymä"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Tuki"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Yhdistä verkon kautta"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Helma"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+msgctxt "info:status"
+msgid "New printer detected from your Ultimaker account"
+msgid_plural "New printers detected from your Ultimaker account"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#, python-brace-format
+msgctxt "info:status Filled in with printer name and printer model."
+msgid "Adding printer {name} ({model}) from your account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Siirtoliike"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Takaisinvedot"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Muu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#, python-brace-format
+msgctxt "info:{0} gets replaced by a number of printers"
+msgid "... and {0} other"
+msgid_plural "... and {0} others"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+msgctxt "info:status"
+msgid "Printers added from Digital Factory:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+msgctxt "info:status"
+msgid "A cloud connection is not available for a printer"
+msgid_plural "A cloud connection is not available for some printers"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+msgctxt "info:status"
+msgid "This printer is not linked to the Digital Factory:"
+msgid_plural "These printers are not linked to the Digital Factory:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+msgctxt "info:name"
+msgid "Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#, python-brace-format
+msgctxt "info:status"
+msgid "To establish a connection, please visit the {website_link}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
-msgid "Show configuration folder"
+msgid "Keep printer configurations"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
+msgid "Remove printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Kaatumisraportti"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "{printer_name} will be removed until the next account sync."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+msgctxt "@title:window"
+msgid "Remove printers?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#, python-brace-format
 msgctxt "@label"
-msgid "Cura language"
-msgstr ""
+msgid ""
+"You are about to remove {0} printer from Cura. This action cannot be undone.\n"
+"Are you sure you want to continue?"
+msgid_plural ""
+"You are about to remove {0} printers from Cura. This action cannot be undone.\n"
+"Are you sure you want to continue?"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
-msgid "OS language"
+msgid ""
+"You are about to remove all printers from Cura. This action cannot be undone.\n"
+"Are you sure you want to continue?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
 #, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
 #, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
+msgctxt "@info:title"
+msgid "Simulation View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Kerrosnäkymä"
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "GCode-tiedosto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+msgctxt "@error"
+msgid "There is no workspace yet to write. Please add a printer first."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Kappaleiden kertominen ja sijoittelu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Sijoitetaan kappaletta"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF-tiedosto"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura-projektin 3MF-tiedosto"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Suutin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Tiedosto on jo olemassa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Viipalointi ei onnistu nykyisellä materiaalilla, sillä se ei sovellu käytettäväksi valitun laitteen tai kokoonpanon kanssa."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Viipalointi ei onnistu"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
 #, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Tiedosto <filename>{0}</filename> on jo olemassa. Haluatko varmasti kirjoittaa sen päälle?"
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Viipalointi ei onnistu nykyisten asetuksien ollessa voimassa. Seuraavissa asetuksissa on virheitä: {0}"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Invalid file URL:"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: <message>{1}</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Viipalointi ei onnistu, koska esitäyttötorni tai esitäytön sijainti tai sijainnit eivät kelpaa."
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: Kirjoitin-lisäosa ilmoitti virheestä."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Profiili viety tiedostoon <filename>{0}</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Käsitellään kerroksia"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
 msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr ""
+msgid "Information"
+msgstr "Tiedot"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D-tiedosto"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG-kuva"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG-kuva"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG-kuva"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP-kuva"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF-kuva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Suutin"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Profiililla {0} on tuntematon tiedostotyyppi tai se on vioittunut."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Mukautettu profiili"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Profiilista puuttuu laatutyyppi."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Mallikohtaiset asetukset"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Määritä mallikohtaiset asetukset"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Suositeltu"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura-profiili"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Mukautettu"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D-tiedosto"
+msgid "3MF File"
+msgstr "3MF-tiedosto"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 -profiilit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
 msgctxt "@info:title"
 msgid "Backups"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
 msgctxt "@info:backup_status"
 msgid "There was an error while uploading your backup."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
 msgctxt "@info:backup_status"
 msgid "Creating your backup..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
 msgctxt "@info:backup_status"
 msgid "There was an error while creating your backup."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
 msgctxt "@info:backup_status"
 msgid "Uploading your backup..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
 msgctxt "@info:backup_status"
 msgid "Your backup has finished uploading."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
 msgctxt "@error:file_size"
 msgid "The backup exceeds the maximum file size."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
 msgctxt "@item:inmenu"
 msgid "Manage backups"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Laitteen asetukset"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Siirrettävä asema"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Save to Removable Drive"
-msgstr "Tallenna siirrettävälle asemalle"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
-#, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "Save to Removable Drive {0}"
-msgstr "Tallenna siirrettävälle asemalle {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
-msgctxt "@info:status"
-msgid "There are no file formats available to write with!"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
-#, python-brace-format
-msgctxt "@info:progress Don't translate the XML tags <filename>!"
-msgid "Saving to Removable Drive <filename>{0}</filename>"
-msgstr "Tallennetaan siirrettävälle asemalle <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
 msgctxt "@info:title"
-msgid "Saving"
-msgstr "Tallennetaan"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Ei voitu tallentaa tiedostoon <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
-#, python-brace-format
-msgctxt "@info:status Don't translate the tag {device}!"
-msgid "Could not find a file name when trying to write to {device}."
-msgstr "Ei löydetty tiedostonimeä yritettäessä kirjoittaa laitteeseen {device}."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Could not save to removable drive {0}: {1}"
-msgstr "Ei voitu tallentaa siirrettävälle asemalle {0}: {1}"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Saved to Removable Drive {0} as {1}"
-msgstr "Tallennettu siirrettävälle asemalle {0} nimellä {1}"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
-msgctxt "@info:title"
-msgid "File Saved"
-msgstr "Tiedosto tallennettu"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-msgctxt "@action:button"
-msgid "Eject"
-msgstr "Poista"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#, python-brace-format
-msgctxt "@action"
-msgid "Eject removable device {0}"
-msgstr "Poista siirrettävä asema {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Ejected {0}. You can now safely remove the drive."
-msgstr "Poistettu {0}. Voit nyt poistaa aseman turvallisesti."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
-msgctxt "@info:title"
-msgid "Safely Remove Hardware"
-msgstr "Poista laite turvallisesti"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Failed to eject {0}. Another program may be using the drive."
-msgstr "Kohteen {0} poistaminen epäonnistui. Asema saattaa olla toisen ohjelman käytössä."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 -profiilit"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Suositeltu"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Mukautettu"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgid "Backup"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF-tiedosto"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "GCode-tiedosto"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
 msgctxt "@item:inmenu"
 msgid "Preview"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
 msgctxt "@item:inlistbox"
 msgid "X-Ray view"
 msgstr "Kerrosnäkymä"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Käsitellään kerroksia"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Tasaa alusta"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "Tiedot"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Valitse päivitykset"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Viipalointi ei onnistu nykyisellä materiaalilla, sillä se ei sovellu käytettäväksi valitun laitteen tai kokoonpanon kanssa."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Viipalointi ei onnistu"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Viipalointi ei onnistu nykyisten asetuksien ollessa voimassa. Seuraavissa asetuksissa on virheitä: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
+msgctxt "@label"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
+msgctxt "@label"
+msgid "Installed Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Viipalointi ei onnistu, koska esitäyttötorni tai esitäytön sijainti tai sijainnit eivät kelpaa."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
+msgctxt "@label"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
+msgctxt "@label"
+msgid "Bundled Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
 msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
 msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr ""
+msgid "Solid view"
+msgstr "Kiinteä näkymä"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-coden jäsennys"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-coden tiedot"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Varmista, että G-code on tulostimelle ja sen tulostusasetuksille soveltuva, ennen kuin lähetät tiedoston siihen. G-coden esitys ei välttämättä ole tarkka."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G File -tiedosto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Laitteen asetukset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
 msgctxt "@item:inmenu"
 msgid "USB printing"
 msgstr "USB-tulostus"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print via USB"
 msgstr "Tulosta USB:n kautta"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
 msgctxt "@info:tooltip"
 msgid "Print via USB"
 msgstr "Tulosta USB:n kautta"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
 msgctxt "@info:status"
 msgid "Connected via USB"
 msgstr "Yhdistetty USB:n kautta"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
 msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
 msgctxt "@message"
 msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
 msgctxt "@message"
 msgid "Print in Progress"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-coden jäsennys"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-coden tiedot"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Varmista, että G-code on tulostimelle ja sen tulostusasetuksille soveltuva, ennen kuin lähetät tiedoston siihen. G-coden esitys ei välttämättä ole tarkka."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G File -tiedosto"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG-kuva"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Ladataan laitteita..."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG-kuva"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG-kuva"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP-kuva"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF-kuva"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Tasaa alusta"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Asetetaan näkymää..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Valitse päivitykset"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Ladataan käyttöliittymää..."
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Päivitystietoja ei löytynyt."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr ""
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Vain yksi G-code-tiedosto voidaan ladata kerralla. Tiedoston {0} tuonti ohitettiin."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Muita tiedostoja ei voida ladata, kun G-code latautuu. Tiedoston {0} tuonti ohitettiin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
+msgctxt "@label"
+msgid "Default"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
 msgctxt "@text"
-msgid "Unable to read example data file."
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
+msgctxt "@label"
+msgid "Engineering"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
+msgctxt "@label"
+msgid "Draft"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Tuntematon"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Lisäosan lisenssisopimus"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Laskettu"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
+msgctxt "@label"
+msgid "Custom Material"
+msgstr "Mukautettu materiaali"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
+msgctxt "@label"
+msgid "Custom"
+msgstr "Mukautettu"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
+msgctxt "@label"
+msgid "Custom profiles"
+msgstr "Mukautetut profiilit"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Kerrosnäkymä"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Tulosta verkon kautta"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Tulosta verkon kautta"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
-msgctxt "@info:status"
-msgid "Connected over the network"
+msgid "All Files (*)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Yhdistä verkon kautta"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
-msgctxt "@info:status"
-msgid "Please wait until the current job has been sent."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
-msgctxt "@info:title"
-msgid "Print error"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
-msgctxt "@info:status"
-msgid "Print job was successfully sent to the printer."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
-msgctxt "@info:title"
-msgid "Data Sent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr ""
+msgid "Finding new location for objects"
+msgstr "Uusien paikkojen etsiminen kappaleille"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Etsitään paikkaa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr ""
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Kaikille kappaleille ei löydy paikkaa tulostustilavuudessa."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr ""
+msgid "Can't Find Location"
+msgstr "Paikkaa ei löydy"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
 msgctxt "@info:title"
-msgid "Network error"
+msgid "Login failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Ulkoseinämä"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Sisäseinämät"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Pintakalvo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
-" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Täyttö"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
-msgctxt "@info:title"
-msgid "Are you ready for cloud printing?"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Tuen täyttö"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
-msgctxt "@action"
-msgid "Get started"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Tukiliittymä"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
-msgctxt "@action"
-msgid "Learn more"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Tuki"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Helma"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
-msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Siirtoliike"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Takaisinvedot"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Muu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
 #, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
+msgctxt "@label"
+msgid "Group #{group_nr}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
-msgctxt "info:status"
-msgid "New printer detected from your Ultimaker account"
-msgid_plural "New printers detected from your Ultimaker account"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
-#, python-brace-format
-msgctxt "info:status Filled in with printer name and printer model."
-msgid "Adding printer {name} ({model}) from your account"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
-#, python-brace-format
-msgctxt "info:{0} gets replaced by a number of printers"
-msgid "... and {0} other"
-msgid_plural "... and {0} others"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
-msgctxt "info:status"
-msgid "Printers added from Digital Factory:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
-msgctxt "info:status"
-msgid "A cloud connection is not available for a printer"
-msgid_plural "A cloud connection is not available for some printers"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
-msgctxt "info:status"
-msgid "This printer is not linked to the Digital Factory:"
-msgid_plural "These printers are not linked to the Digital Factory:"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Sulje"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
-msgctxt "info:name"
-msgid "Ultimaker Digital Factory"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Lisää"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
-#, python-brace-format
-msgctxt "info:status"
-msgid "To establish a connection, please visit the {website_link}"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
 msgctxt "@action:button"
-msgid "Keep printer configurations"
-msgstr ""
+msgid "Cancel"
+msgstr "Peruuta"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
 msgctxt "@action:button"
-msgid "Remove printers"
+msgid "Next"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "{printer_name} will be removed until the next account sync."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Tulostustilavuuden korkeutta on vähennetty tulostusjärjestysasetuksen vuoksi, jotta koroke ei osuisi tulostettuihin malleihin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Tulostustilavuus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "Are you sure you want to remove {printer_name} temporarily?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
 msgctxt "@title:window"
-msgid "Remove printers?"
-msgstr ""
+msgid "File Already Exists"
+msgstr "Tiedosto on jo olemassa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
 #, python-brace-format
-msgctxt "@label"
-msgid ""
-"You are about to remove {0} printer from Cura. This action cannot be undone.\n"
-"Are you sure you want to continue?"
-msgid_plural ""
-"You are about to remove {0} printers from Cura. This action cannot be undone.\n"
-"Are you sure you want to continue?"
-msgstr[0] ""
-msgstr[1] ""
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Tiedosto <filename>{0}</filename> on jo olemassa. Haluatko varmasti kirjoittaa sen päälle?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
-msgctxt "@label"
-msgid ""
-"You are about to remove all printers from Cura. This action cannot be undone.\n"
-"Are you sure you want to continue?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
-msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: Kirjoitin-lisäosa ilmoitti virheestä."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Profiili viety tiedostoon <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
 msgctxt "@info:title"
-msgid "Model Errors"
+msgid "Export succeeded"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Kiinteä näkymä"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
-msgctxt "@error"
-msgid "There is no workspace yet to write. Please add a printer first."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF-tiedosto"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura-projektin 3MF-tiedosto"
-
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
 #, python-brace-format
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgid "File {0} does not contain any valid profile."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Profiililla {0} on tuntematon tiedostotyyppi tai se on vioittunut."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@label"
-msgid "Normal model"
-msgstr ""
+msgid "Custom profile"
+msgstr "Mukautettu profiili"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Profiilista puuttuu laatutyyppi."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
-msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
-msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Valitse asetukset"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Valitse tätä mallia varten mukautettavat asetukset"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Suodatin..."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Näytä kaikki"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Kappaleiden kertominen ja sijoittelu"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Sijoitetaan kappaletta"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
+msgctxt "@action:button"
+msgid "Send crash report to Ultimaker"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
+msgctxt "@action:button"
+msgid "Show detailed crash report"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
+msgctxt "@action:button"
+msgid "Show configuration folder"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
+msgctxt "@action:button"
+msgid "Backup and Reset Configuration"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Kaatumisraportti"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (leveys)"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "mm"
-msgstr "mm"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (syvyys)"
+msgid "Cura language"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (korkeus)"
+msgid "OS language"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Alustan muoto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Origin at center"
+msgid "Qt version"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Heated bed"
+msgid "PyQt version"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "G-code flavor"
+msgid "Not yet initialized<br/>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X väh."
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y väh."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X enint."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y enint."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
-msgctxt "@label"
-msgid "Gantry Height"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Suulakkeiden määrä"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
+msgctxt "@info"
+msgid "In order to monitor your print from Cura, please connect the printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Valitse tätä mallia varten mukautettavat asetukset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Suodatin..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Näytä kaikki"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
 msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Suuttimen koko"
+msgid "Mesh Type"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "Compatible material diameter"
+msgid "Normal model"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Suuttimen X-siirtymä"
+msgid "Print as support"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Suuttimen Y-siirtymä"
+msgid "Modify settings for overlaps"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
 msgctxt "@label"
-msgid "Cooling Fan Number"
+msgid "Don't support overlaps"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Tulostin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "Valitse asetukset"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Laiteohjelmisto on suoraan 3D-tulostimessa toimiva ohjelma. Laiteohjelmisto ohjaa askelmoottoreita, säätää lämpötilaa ja saa tulostimen toimimaan."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Uusien tulostimien mukana toimitettava laiteohjelmisto toimii, mutta uusissa versioissa on yleensä enemmän toimintoja ja parannuksia."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Päivitä laiteohjelmisto automaattisesti"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Lataa mukautettu laiteohjelmisto"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Valitse mukautettu laiteohjelmisto"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Laiteohjelmiston päivitys"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Päivitetään laiteohjelmistoa."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Laiteohjelmiston päivitys suoritettu."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Laiteohjelmiston päivitys epäonnistui tuntemattoman virheen takia."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Laiteohjelmiston päivitys epäonnistui tietoliikennevirheen takia."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Laiteohjelmiston päivitys epäonnistui tiedoston lukemiseen tai kirjoittamiseen liittyvän virheen takia."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Laiteohjelmiston päivitys epäonnistui puuttuvan laiteohjelmiston takia."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Avaa projekti"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Yhteenveto – Cura-projekti"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Tulostimen asetukset"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Miten laitteen ristiriita pitäisi ratkaista?"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tyyppi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Valmis"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profiilin asetukset"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Miten profiilin ristiriita pitäisi ratkaista?"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nimi"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Ei profiilissa"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 ohitus"
-msgstr[1] "%1 ohitusta"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Johdettu seuraavista"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 ohitus"
-msgstr[1] "%1, %2 ohitusta"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Materiaaliasetukset"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Miten materiaalin ristiriita pitäisi ratkaista?"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Asetusten näkyvyys"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Tila"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Näkyvät asetukset:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1/%2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Avaa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Jälkikäsittelylisäosa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Vaatii toimenpiteitä"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Jälkikäsittelykomentosarjat"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Lisää komentosarja"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
+msgctxt "@label link to Connect and Cloud interfaces"
+msgid "Manage printer"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
-msgid "Settings"
-msgstr "Asetukset"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
+msgid "Glass"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Muunna kuva..."
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Kunkin pikselin suurin etäisyys \"Pohja\"-arvosta."
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Korkeus (mm)"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Pohjan korkeus alustasta millimetreinä."
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Pohja (mm)"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Leveys millimetreinä alustalla."
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Leveys (mm)"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Syvyys millimetreinä alustalla"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Syvyys (mm)"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Tummempi on korkeampi"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Vaaleampi on korkeampi"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
+msgctxt "@info"
+msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
+msgctxt "@label:status"
+msgid "Loading..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
+msgctxt "@label:status"
+msgid "Unavailable"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
+msgctxt "@label:status"
+msgid "Unreachable"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
+msgctxt "@label:status"
+msgid "Idle"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Kuvassa käytettävän tasoituksen määrä."
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Tasoitus"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
-
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Valitse tähän Ultimaker Original -laitteeseen tehdyt päivitykset"
-
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Lämmitettävä alusta (virallinen sarja tai itse rakennettu)"
-
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Alustan tasaaminen"
-
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Voit säätää alustaa, jotta tulosteista tulisi hyviä. Kun napsautat \"Siirry seuraavaan positioon\", suutin siirtyy eri positioihin, joita voidaan säätää."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+msgctxt "@label:status"
+msgid "Printing"
+msgstr "Tulostetaan"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Laita paperinpala kussakin positiossa suuttimen alle ja säädä tulostusalustan korkeus. Tulostusalustan korkeus on oikea, kun suuttimen kärki juuri ja juuri osuu paperiin."
-
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Aloita alustan tasaaminen"
-
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Siirry seuraavaan positioon"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
+msgid "Untitled"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
+msgctxt "@label"
+msgid "Anonymous"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
+msgctxt "@label:status"
+msgid "Requires configuration changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
+msgctxt "@action:button"
+msgid "Details"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
-msgid "Install"
+msgid "Override"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Asennettu"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
-msgid "Premium"
-msgstr ""
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
+msgctxt "@label"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
-msgid "Search materials"
+msgid "Change material %1 from %2 to %3."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
-msgid "Compatibility"
+msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
+msgctxt "@label"
+msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
+msgctxt "@label"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
+msgctxt "@label"
+msgid "Aluminum"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Tulosta verkon kautta"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Tulosta"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
+msgctxt "@title:window"
+msgid "Connect to Networked Printer"
+msgstr "Yhdistä verkkotulostimeen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
+msgctxt "@label"
+msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
+msgctxt "@label"
+msgid "Select your printer from the list below:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
-msgid "Update"
-msgstr ""
+msgid "Edit"
+msgstr "Muokkaa"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
-msgid "Updating"
-msgstr ""
+msgid "Remove"
+msgstr "Poista"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
-msgid "Updated"
-msgstr ""
+msgid "Refresh"
+msgstr "Päivitä"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
+msgctxt "@label"
+msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
+msgstr "Jos tulostinta ei ole luettelossa, lue <a href='%1'>verkkotulostuksen vianetsintäopas</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+msgctxt "@label"
+msgid "Type"
+msgstr "Tyyppi"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiaalit"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+msgctxt "@label"
+msgid "Firmware version"
+msgstr "Laiteohjelmistoversio"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+msgctxt "@label"
+msgid "Address"
+msgstr "Osoite"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
-msgid "Will install upon restarting"
+msgid "This printer is not set up to host a group of printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
+msgctxt "@label"
+msgid "This printer is the host for a group of %1 printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
+msgctxt "@label"
+msgid "The printer at this address has not yet responded."
+msgstr "Tämän osoitteen tulostin ei ole vielä vastannut."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
-msgid "Uninstall"
+msgid "Connect"
+msgstr "Yhdistä"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
+msgctxt "@title:window"
+msgid "Invalid IP address"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+msgctxt "@text"
+msgid "Please enter a valid IP address."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
+msgctxt "@title:window"
+msgid "Printer Address"
+msgstr "Tulostimen osoite"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
-msgid "Community Plugins"
+msgid "Enter the IP address of your printer on the network."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
 msgctxt "@label"
-msgid "Generic Materials"
+msgid "Unavailable printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
-msgid "Website"
+msgid "Move to top"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
-msgid "Email"
+msgid "Delete"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
+msgctxt "@label"
+msgid "Resume"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
-msgid "Version"
+msgid "Pausing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
-msgid "Last updated"
+msgid "Resuming..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
-msgid "Brand"
-msgstr "Merkki"
+msgid "Pause"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
-msgid "Downloads"
+msgid "Aborting..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Abort"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+msgctxt "@window:title"
+msgid "Move print job to top"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
-msgctxt "@info"
-msgid "No material has been installed."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to delete %1?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
+msgctxt "@window:title"
+msgid "Delete print job"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to abort %1?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
+msgctxt "@window:title"
+msgid "Abort print"
+msgstr "Keskeytä tulostus"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr ""
+msgid "Queued"
+msgstr "Jonossa"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
 msgctxt "@label"
-msgid "The following packages will be added:"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
+msgid "Print jobs"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
 msgctxt "@label"
 msgid "Color scheme"
 msgstr "Värimalli"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
 msgctxt "@label:listbox"
 msgid "Material Color"
 msgstr "Materiaalin väri"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
 msgctxt "@label:listbox"
 msgid "Line Type"
 msgstr "Linjojen tyyppi"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
 msgctxt "@label:listbox"
 msgid "Speed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
 msgctxt "@label:listbox"
 msgid "Layer Thickness"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
 msgctxt "@label:listbox"
 msgid "Line Width"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
 msgctxt "@label:listbox"
 msgid "Flow"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
 msgctxt "@label"
 msgid "Compatibility Mode"
 msgstr "Yhteensopivuustila"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
 msgctxt "@label"
 msgid "Travels"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
 msgctxt "@label"
 msgid "Helpers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
 msgctxt "@label"
 msgid "Shell"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
 msgctxt "@label"
 msgid "Infill"
 msgstr "Täyttö"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
 msgctxt "@label"
 msgid "Starts"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
 msgctxt "@label"
 msgid "Only Show Top Layers"
 msgstr "Näytä vain yläkerrokset"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
 msgctxt "@label"
 msgid "Show 5 Detailed Layers On Top"
 msgstr "Näytä 5 yksityiskohtaista kerrosta ylhäällä"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
 msgctxt "@label"
 msgid "Top / Bottom"
 msgstr "Yläosa/alaosa"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
 msgctxt "@label"
 msgid "Inner Wall"
 msgstr "Sisäseinämä"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
 msgctxt "@label"
 msgid "min"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
 msgctxt "@label"
 msgid "max"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-msgctxt "@label"
-msgid "Glass"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Korkeus (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Kunkin pikselin suurin etäisyys \"Pohja\"-arvosta."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
-msgctxt "@info"
-msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Pohja (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
-msgctxt "@label:status"
-msgid "Loading..."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Pohjan korkeus alustasta millimetreinä."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
-msgctxt "@label:status"
-msgid "Unavailable"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Leveys (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
-msgctxt "@label:status"
-msgid "Unreachable"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Syvyys (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "Syvyys millimetreinä alustalla"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Tummempi on korkeampi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Vaaleampi on korkeampi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
-msgctxt "@label:status"
-msgid "Idle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
-msgctxt "@label:status"
-msgid "Printing"
-msgstr "Tulostetaan"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
-msgctxt "@label"
-msgid "Untitled"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
-msgctxt "@label"
-msgid "Anonymous"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
-msgctxt "@label:status"
-msgid "Requires configuration changes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Tasoitus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Kuvassa käytettävän tasoituksen määrä."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Details"
-msgstr ""
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Avaa projekti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Jonossa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Yhteenveto – Cura-projekti"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Miten laitteen ristiriita pitäisi ratkaista?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Tulostimen asetukset"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tyyppi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Miten profiilin ristiriita pitäisi ratkaista?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Tulosta verkon kautta"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profiilin asetukset"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Tulosta"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nimi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Ei profiilissa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 ohitus"
+msgstr[1] "%1 ohitusta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Johdettu seuraavista"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 ohitus"
+msgstr[1] "%1, %2 ohitusta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Miten materiaalin ristiriita pitäisi ratkaista?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Materiaaliasetukset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Asetusten näkyvyys"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Tila"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Näkyvät asetukset:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1/%2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
 msgctxt "@action:button"
-msgid "Override"
+msgid "Open"
+msgstr "Avaa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+msgctxt "@button"
+msgid "Want more?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
-msgctxt "@label"
-msgid "Aluminum"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Valmis"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
+msgctxt "@button"
+msgid "Sign in"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Vaatii toimenpiteitä"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
 msgctxt "@title:window"
-msgid "Connect to Networked Printer"
-msgstr "Yhdistä verkkotulostimeen"
+msgid "Cura Backups"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid "Select your printer from the list below:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
-msgctxt "@action:button"
-msgid "Edit"
-msgstr "Muokkaa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
-msgctxt "@action:button"
-msgid "Remove"
-msgstr "Poista"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
-msgctxt "@action:button"
-msgid "Refresh"
-msgstr "Päivitä"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Jälkikäsittelylisäosa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
-msgstr "Jos tulostinta ei ole luettelossa, lue <a href='%1'>verkkotulostuksen vianetsintäopas</a>"
+msgid "Post Processing Scripts"
+msgstr "Jälkikäsittelykomentosarjat"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
-msgctxt "@label"
-msgid "Type"
-msgstr "Tyyppi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Lisää komentosarja"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Firmware version"
-msgstr "Laiteohjelmistoversio"
+msgid "Settings"
+msgstr "Asetukset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Address"
-msgstr "Osoite"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Valitse tähän Ultimaker Original -laitteeseen tehdyt päivitykset"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
-msgstr ""
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Lämmitettävä alusta (virallinen sarja tai itse rakennettu)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Alustan tasaaminen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
-msgstr ""
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Voit säätää alustaa, jotta tulosteista tulisi hyviä. Kun napsautat \"Siirry seuraavaan positioon\", suutin siirtyy eri positioihin, joita voidaan säätää."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The printer at this address has not yet responded."
-msgstr "Tämän osoitteen tulostin ei ole vielä vastannut."
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Laita paperinpala kussakin positiossa suuttimen alle ja säädä tulostusalustan korkeus. Tulostusalustan korkeus on oikea, kun suuttimen kärki juuri ja juuri osuu paperiin."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
 msgctxt "@action:button"
-msgid "Connect"
-msgstr "Yhdistä"
+msgid "Start Build Plate Leveling"
+msgstr "Aloita alustan tasaaminen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
-msgctxt "@title:window"
-msgid "Invalid IP address"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Siirry seuraavaan positioon"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
-msgctxt "@text"
-msgid "Please enter a valid IP address."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
-msgctxt "@title:window"
-msgid "Printer Address"
-msgstr "Tulostimen osoite"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
-msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
-msgctxt "@label"
-msgid "Move to top"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
-msgctxt "@label"
-msgid "Delete"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
+msgctxt "@button"
+msgid "Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
-msgctxt "@label"
-msgid "Resume"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
-msgctxt "@label"
-msgid "Pausing..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
-msgctxt "@label"
-msgid "Resuming..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
+msgctxt "@button"
+msgid "In order to use the package you will need to restart Cura"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
-msgctxt "@label"
-msgid "Pause"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Aborting..."
+msgid "By"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
-msgctxt "@label"
-msgid "Abort"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
-msgctxt "@window:title"
-msgid "Move print job to top"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
+msgctxt "@button"
+msgid "Downgrading..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
+msgctxt "@button"
+msgid "Downgrade"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
-msgctxt "@window:title"
-msgid "Delete print job"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
+msgctxt "@button"
+msgid "Install"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
-msgctxt "@window:title"
-msgid "Abort print"
-msgstr "Keskeytä tulostus"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Update"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
+msgctxt "@text"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgid "Manage packages"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "Tie&dosto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Muokkaa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Näytä"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Laa&jennukset"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "L&isäasetukset"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Ohje"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Uusi projekti"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Haluatko varmasti aloittaa uuden projektin? Se tyhjentää alustan ja kaikki tallentamattomat asetukset."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Viipaloidaan..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
+msgctxt "@text"
+msgid "Please read and agree with the plugin licence."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Processing"
+msgid "Accept"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
 msgctxt "@button"
-msgid "Slice"
+msgid "Decline"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
 msgctxt "@button"
-msgid "Cancel"
+msgid "Retry?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
+msgctxt "@text"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Tulostin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr ""
+msgid "Nozzle size"
+msgstr "Suuttimen koko"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr ""
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Waiting for Cloud response"
+msgid "Compatible material diameter"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr ""
+msgid "Nozzle offset X"
+msgstr "Suuttimen X-siirtymä"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr ""
+msgid "Nozzle offset Y"
+msgstr "Suuttimen Y-siirtymä"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Could not connect to device."
+msgid "X (Width)"
+msgstr "X (leveys)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+msgctxt "@label"
+msgid "Y (Depth)"
+msgstr "Y (syvyys)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (korkeus)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
+msgctxt "@label"
+msgid "Build plate shape"
+msgstr "Alustan muoto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
+msgid "Heated bed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
 msgctxt "@label"
-msgid "The printer at this address has not responded yet."
+msgid "Heated build volume"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
 msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgid "G-code flavor"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
-msgctxt "@button"
-msgid "Back"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
-msgctxt "@button"
-msgid "Connect"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X väh."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y väh."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X enint."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y enint."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
 msgctxt "@label"
-msgid "User Agreement"
+msgid "Number of Extruders"
+msgstr "Suulakkeiden määrä"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
-msgctxt "@button"
-msgid "Get started"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
-msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
-msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
-msgctxt "@button"
-msgid "Skip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
-msgctxt "@text"
-msgid "Create a free Ultimaker Account"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
-msgctxt "@label"
-msgid "Manufacturer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
-msgctxt "@label"
-msgid "Profile author"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
-msgctxt "@label"
-msgid "Printer name"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
-msgctxt "@label"
-msgid "Refresh"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
-msgctxt "@label"
-msgid "Add printer by IP"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Tulosta valittu malli asetuksella %1"
+msgstr[1] "Tulosta valitut mallit asetuksella %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Uusi projekti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Haluatko varmasti aloittaa uuden projektin? Se tyhjentää alustan ja kaikki tallentamattomat asetukset."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr ""
+msgid "Build plate"
+msgstr "Alusta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "Lämmitettävän pöydän kohdelämpötila. Pöytä lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, pöydän lämmitys sammutetaan."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "Lämmitettävän pöydän nykyinen lämpötila."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "Lämmitettävän pöydän esilämmityslämpötila."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Peruuta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Esilämmitä"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Lämmitä pöytä ennen tulostusta. Voit edelleen säätää tulostinta sen lämmitessä, eikä sinun tarvitse odottaa pöydän lämpiämistä, kun olet valmis tulostamaan."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "Tulostinta ei ole yhdistetty."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
+msgid "Printer control"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Suulake"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Kuuman pään kohdelämpötila. Kuuma pää lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, kuuman pään lämmitys sammutetaan."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
-msgctxt "@label"
-msgid "What's New"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
-msgctxt "@label"
-msgid "Release Notes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Tämän suulakkeen materiaalin väri."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Tämän suulakkeen materiaali."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "Tähän suulakkeeseen liitetty suutin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Avaa projektitiedosto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Tämä on Cura-projektitiedosto. Haluatko avata sen projektina vai tuoda siinä olevat mallit?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Muista valintani"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Avaa projektina"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Tuo mallit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Tallenna projekti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Suulake %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & materiaali"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Älä näytä projektin yhteenvetoa tallennettaessa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Tallenna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Avaa tiedosto(t)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Löysimme vähintään yhden projektitiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden projektitiedoston kerrallaan. Suosittelemme, että tuot vain malleja niistä tiedostoista. Haluatko jatkaa?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Tuo kaikki malleina"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Kokonaisvaltainen sulatettavan tulostuslangan 3D-tulostusratkaisu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3732,2219 +3567,2379 @@ msgstr ""
 "Cura-ohjelman on kehittänyt Ultimaker B.V. yhteistyössä käyttäjäyhteisön kanssa.\n"
 "Cura hyödyntää seuraavia avoimeen lähdekoodiin perustuvia projekteja:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Graafinen käyttöliittymä"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Sovelluskehys"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Prosessien välinen tietoliikennekirjasto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Ohjelmointikieli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI-kehys"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI-kehyksen sidonnat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ -sidontakirjasto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Data Interchange Format"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Tieteellisen laskennan tukikirjasto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Nopeamman laskennan tukikirjasto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "STL-tiedostojen käsittelyn tukikirjasto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Tukikirjasto 3MF-tiedostojen käsittelyyn"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Sarjatietoliikennekirjasto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf-etsintäkirjasto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Monikulmion leikkauskirjasto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Fontti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG-kuvakkeet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Avaa tiedosto(t)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Löysimme vähintään yhden projektitiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden projektitiedoston kerrallaan. Suosittelemme, että tuot vain malleja niistä tiedostoista. Haluatko jatkaa?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Tuo kaikki malleina"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Tallenna projekti"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Suulake %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & materiaali"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Älä näytä projektin yhteenvetoa tallennettaessa"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Tallenna"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Hylkää tai säilytä muutokset"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Profiilin asetukset"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Kysy aina"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Hylkää äläkä kysy uudelleen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Säilytä äläkä kysy uudelleen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Avaa projektitiedosto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Tämä on Cura-projektitiedosto. Haluatko avata sen projektina vai tuoda siinä olevat mallit?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Muista valintani"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Avaa &viimeisin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Avaa projektina"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Tuo mallit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiaali"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Aseta aktiiviseksi suulakepuristimeksi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Ohje"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "Tie&dosto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "L&isäasetukset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Muokkaa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Tulostin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Laa&jennukset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Aktiivinen tulostustyö"
+msgid "Loading available configurations from the printer..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Työn nimi"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tulostusaika"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Aikaa jäljellä arviolta"
+msgid "Marketplace"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
+msgid "Enabled"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
+msgid "Material"
+msgstr "Materiaali"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Tulostusasetukset"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Tulosta valittu malli asetuksella:"
+msgstr[1] "Tulosta valitut mallit asetuksella:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Kerro valittu malli"
+msgstr[1] "Kerro valitut mallit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Kopioiden määrä"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Näytä"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
 msgctxt "@label"
-msgid "Profile"
+msgid "View type"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Jotkut asetusten ja ohitusten arvot eroavat profiiliin tallennetuista arvoista.\n"
-"\n"
-"Avaa profiilin hallinta napsauttamalla."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Hylkää tehdyt muutokset"
+msgid "Sign in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
+msgid "Ultimaker Account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
+msgid "Sign Out"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Viipaloidaan..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Yleiset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Asetukset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Tulostimet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiaalit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profiilit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Avaa tiedosto(t)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Löysimme vähintään yhden Gcode-tiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden Gcode-tiedoston kerrallaan. Jos haluat avata Gcode-tiedoston, valitse vain yksi."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Lisää tulostin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Tulostusasetukset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
+msgid "Gradual infill"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Asteittainen täyttö lisää täytön tiheyttä vähitellen yläosaa kohti."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Muodosta rakenteita, jotka tukevat mallin ulokkeita sisältäviä osia. Ilman tukirakenteita kyseiset osat luhistuvat tulostuksen aikana."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
+msgid "Profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Asteittainen täyttö lisää täytön tiheyttä vähitellen yläosaa kohti."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Ota reunuksen tai pohjaristikon tulostus käyttöön. Tämä lisää kappaleen ympärille tai alle tasaisen alueen, joka on helppo leikata pois myöhemmin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Hylkää tehdyt muutokset"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
 msgstr ""
+"Jotkut asetusten ja ohitusten arvot eroavat profiiliin tallennetuista arvoista.\n"
+"\n"
+"Avaa profiilin hallinta napsauttamalla."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Asetus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profiili"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Nykyinen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
+msgctxt "@title:window"
+msgid "Rename"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Tulosta valittu malli asetuksella:"
-msgstr[1] "Tulosta valitut mallit asetuksella:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Kerro valittu malli"
-msgstr[1] "Kerro valitut mallit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Kopioiden määrä"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Näkyvyyden asettaminen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Tarkista kaikki"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktivoi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Nimeä uudelleen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr ""
+msgid "Display Name"
+msgstr "Näytä nimi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr ""
+msgid "Brand"
+msgstr "Merkki"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiaali"
+msgid "Material Type"
+msgstr "Materiaalin tyyppi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
+msgid "Color"
+msgstr "Väri"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Ominaisuudet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
+msgctxt "@label"
+msgid "Density"
+msgstr "Tiheys"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
+msgctxt "@label"
+msgid "Diameter"
+msgstr "Läpimitta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Tulostuslangan hinta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
+msgctxt "@label"
+msgid "Filament weight"
+msgstr "Tulostuslangan paino"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Tulostuslangan pituus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Hinta metriä kohden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Materiaali on linkitetty kohteeseen %1 ja niillä on joitain samoja ominaisuuksia."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Poista materiaalin linkitys"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Kuvaus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Tarttuvuustiedot"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Tiedot"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
-msgctxt "@label"
-msgid "Select configuration"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
-msgctxt "@label"
-msgid "Configurations"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
-msgctxt "@label"
-msgid "Loading available configurations from the printer..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
-msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
-msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
-msgctxt "@label"
-msgid "Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Tulostin"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiaali"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Aseta aktiiviseksi suulakepuristimeksi"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Avaa &viimeisin"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profiilit"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktivoi"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Luo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Jäljennös"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Nimeä uudelleen"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Tuo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Vie"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Luo profiili"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
+msgid "Sync with Printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Monista profiili"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Jäljennös"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Vie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Nimeä profiili uudelleen"
+msgid "Import Material"
+msgstr "Tuo materiaali"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profiilin tuonti"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Materiaalin tuominen onnistui: <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Materiaalin tuominen epäonnistui: <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profiilin vienti"
+msgid "Export Material"
+msgstr "Vie materiaali"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Tulostin: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Materiaalin vieminen epäonnistui kohteeseen <filename>%1</filename>: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Materiaalin vieminen onnistui kohteeseen <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Päivitä nykyiset asetukset tai ohitukset profiiliin"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Tässä profiilissa käytetään tulostimen oletusarvoja, joten siinä ei ole alla olevan listan asetuksia tai ohituksia."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Nykyiset asetukset vastaavat valittua profiilia."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Yleiset asetukset"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Yleiset"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Luo profiili"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profiilin vienti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Monista profiili"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Nimeä profiili uudelleen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profiilin tuonti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Käyttöliittymä"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Valuutta:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Teema:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Sovellus on käynnistettävä uudelleen, jotta nämä muutokset tulevat voimaan."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Viipaloi automaattisesti, kun asetuksia muutetaan."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Viipaloi automaattisesti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Näyttöikkunan käyttäytyminen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Korosta mallin vailla tukea olevat alueet punaisella. Ilman tukea nämä alueet eivät tulostu kunnolla."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Näytä uloke"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Siirtää kameraa siten, että valittuna oleva malli on näkymän keskellä."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Keskitä kamera kun kohde on valittu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Pitääkö Curan oletusarvoinen zoom-toimintatapa muuttaa päinvastaiseksi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Käännä kameran zoomin suunta päinvastaiseksi."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Tuleeko zoomauksen siirtyä hiiren suuntaan?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomaa hiiren suuntaan"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Pitäisikö alustalla olevia malleja siirtää niin, etteivät ne enää leikkaa toisiaan?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Varmista, että mallit ovat erillään"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Pitäisikö tulostusalueella olevia malleja siirtää alas niin, että ne koskettavat tulostusalustaa?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Pudota mallit automaattisesti alustalle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Pakotetaanko kerros yhteensopivuustilaan?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Pakota kerrosnäkymän yhteensopivuustila (vaatii uudelleenkäynnistyksen)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Tiedostojen avaaminen ja tallentaminen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Pitäisikö mallit skaalata tulostustilavuuteen, jos ne ovat liian isoja?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Skaalaa suuret mallit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Malli voi vaikuttaa erittäin pieneltä, jos sen koko on ilmoitettu esimerkiksi metreissä eikä millimetreissä. Pitäisikö nämä mallit suurentaa?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Skaalaa erittäin pienet mallit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Pitäisikö tulostustyön nimeen lisätä automaattisesti tulostimen nimeen perustuva etuliite?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Lisää laitteen etuliite työn nimeen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Näytetäänkö yhteenveto, kun projektitiedosto tallennetaan?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Näytä yhteenvetoikkuna, kun projekti tallennetaan"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Projektitiedoston avaamisen oletustoimintatapa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Projektitiedoston avaamisen oletustoimintatapa: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Avaa aina projektina"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Tuo mallit aina"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Kun olet tehnyt muutokset profiiliin ja vaihtanut toiseen, näytetään valintaikkuna, jossa kysytään, haluatko säilyttää vai hylätä muutokset. Tässä voit myös valita oletuskäytöksen, jolloin valintaikkunaa ei näytetä uudelleen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Tietosuoja"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Pitäisikö anonyymejä tietoja tulosteesta lähettää Ultimakerille? Huomaa, että malleja, IP-osoitteita tai muita henkilökohtaisia tietoja ei lähetetä eikä tallenneta."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Lähetä (anonyymit) tulostustiedot"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Pitäisikö Curan tarkistaa saatavilla olevat päivitykset, kun ohjelma käynnistetään?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Tarkista päivitykset käynnistettäessä"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Tiedot"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Näytä nimi"
+msgid "Could not connect to device."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Materiaalin tyyppi"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Väri"
+msgid "The printer at this address has not responded yet."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Ominaisuudet"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Tiheys"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Läpimitta"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Tulostuslangan hinta"
+msgid "User Agreement"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Tulostuslangan paino"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Tulostuslangan pituus"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Hinta metriä kohden"
+msgid "What's New"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
-msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Materiaali on linkitetty kohteeseen %1 ja niillä on joitain samoja ominaisuuksia."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Poista materiaalin linkitys"
+msgid "Add a Cloud printer"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Description"
-msgstr "Kuvaus"
+msgid "Waiting for Cloud response"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Tarttuvuustiedot"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Luo"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Jäljennös"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
+msgid "No printers found in your account?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Tuo materiaali"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Materiaalin tuominen epäonnistui: <filename>%1</filename>: <message>%2</message>"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Materiaalin tuominen onnistui: <filename>%1</filename>"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Vie materiaali"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Materiaalin vieminen epäonnistui kohteeseen <filename>%1</filename>: <message>%2</message>"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Materiaalin vieminen onnistui kohteeseen <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
 msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
 msgctxt "@button"
-msgid "Start"
+msgid "Skip"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
 msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
 msgctxt "@button"
-msgid "Sync materials with USB"
+msgid "Get started"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
-msgid "Troubleshooting"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
-msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
-msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
+msgid "Troubleshooting"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
 msgctxt "@text"
-msgid "Click the export material archive button."
+msgid "Number of slices"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
+msgid "Print settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
 msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Näkyvyyden asettaminen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Tarkista kaikki"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Tulostimet"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Laskettu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Asetus"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profiili"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Nykyinen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Yksikkö"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Ei yhteyttä tulostimeen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "Tulostin ei hyväksy komentoja"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "Huolletaan. Tarkista tulostin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Yhteys tulostimeen menetetty"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Tulostetaan..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Keskeytetty"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Valmistellaan..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Poista tuloste"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Haluatko varmasti keskeyttää tulostuksen?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Tulosta valittu malli asetuksella %1"
-msgstr[1] "Tulosta valitut mallit asetuksella %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
 msgstr ""
+"Jotkin piilotetut asetukset käyttävät arvoja, jotka eroavat normaaleista lasketuista arvoista.\n"
+"\n"
+"Tee asetuksista näkyviä napsauttamalla."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Kopioi arvo kaikkiin suulakepuristimiin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Piilota tämä asetus"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Älä näytä tätä asetusta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Pidä tämä asetus näkyvissä"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Määritä asetusten näkyvyys..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
+msgid "This setting is not used because all the settings that it influences are overridden."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Koskee seuraavia:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Riippuu seuraavista:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgid "This setting is resolved from conflicting extruder-specific values:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Suulake"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Kuuman pään kohdelämpötila. Kuuma pää lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, kuuman pään lämmitys sammutetaan."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Peruuta"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Esilämmitä"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
 msgstr ""
+"Tämän asetuksen arvo eroaa profiilin arvosta.\n"
+"\n"
+"Palauta profiilin arvo napsauttamalla."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Tämän suulakkeen materiaalin väri."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Tämän suulakkeen materiaali."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "Tähän suulakkeeseen liitetty suutin."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "Tulostinta ei ole yhdistetty."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Alusta"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "Lämmitettävän pöydän kohdelämpötila. Pöytä lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, pöydän lämmitys sammutetaan."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "Lämmitettävän pöydän nykyinen lämpötila."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "Lämmitettävän pöydän esilämmityslämpötila."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Lämmitä pöytä ennen tulostusta. Voit edelleen säätää tulostinta sen lämmitessä, eikä sinun tarvitse odottaa pöydän lämpiämistä, kun olet valmis tulostamaan."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
+"Tämä asetus on normaalisti laskettu, mutta sillä on tällä hetkellä absoluuttinen arvo.\n"
+"\n"
+"Palauta laskettu arvo napsauttamalla."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
+msgid "Hex"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr ""
+msgid "Active print"
+msgstr "Aktiivinen tulostustyö"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr ""
+msgid "Job Name"
+msgstr "Työn nimi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tulostusaika"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr ""
+msgid "Estimated time left"
+msgstr "Aikaa jäljellä arviolta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
+msgid "Show Online Troubleshooting"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Vaihda koko näyttöön"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Kumoa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "Tee &uudelleen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Lopeta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Määritä Curan asetukset..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "L&isää tulostin..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Tulostinten &hallinta..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Hallitse materiaaleja..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Päivitä nykyiset asetukset tai ohitukset profiiliin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Hylkää tehdyt muutokset"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&Luo profiili nykyisten asetusten tai ohitusten perusteella..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Profiilien hallinta..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Näytä sähköinen &dokumentaatio"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Ilmoita &virheestä"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Tietoja..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Poista malli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Ke&skitä malli alustalle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "&Ryhmittele mallit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Poista mallien ryhmitys"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "&Yhdistä mallit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Kerro malli..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Valitse kaikki mallit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Tyhjennä tulostusalusta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Lataa kaikki mallit uudelleen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Järjestä kaikki mallit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Järjestä valinta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Määritä kaikkien mallien positiot uudelleen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Määritä kaikkien mallien muutokset uudelleen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Avaa tiedosto(t)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Uusi projekti..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Näytä määrityskansio"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Määritä asetusten näkyvyys..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Koskee seuraavia:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Riippuu seuraavista:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Tämän asetuksen arvo eroaa profiilin arvosta.\n"
-"\n"
-"Palauta profiilin arvo napsauttamalla."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Tämä asetus on normaalisti laskettu, mutta sillä on tällä hetkellä absoluuttinen arvo.\n"
-"\n"
-"Palauta laskettu arvo napsauttamalla."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Kopioi arvo kaikkiin suulakepuristimiin"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Piilota tämä asetus"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Älä näytä tätä asetusta"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Pidä tämä asetus näkyvissä"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Jotkin piilotetut asetukset käyttävät arvoja, jotka eroavat normaaleista lasketuista arvoista.\n"
-"\n"
-"Tee asetuksista näkyviä napsauttamalla."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Asetukset"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Avaa tiedosto(t)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Löysimme vähintään yhden Gcode-tiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden Gcode-tiedoston kerrallaan. Jos haluat avata Gcode-tiedoston, valitse vain yksi."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Lisää tulostin"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
 msgstr ""
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Mallikohtaisten asetusten muokkaus."
+msgid "Provides a prepare stage in Cura."
+msgstr ""
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Mallikohtaisten asetusten työkalu"
+msgid "Prepare Stage"
+msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Tukee Cura-profiilien tuontia."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Tukee Cura-profiilien vientiä."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura-profiilin lukija"
+msgid "Cura Profile Writer"
+msgstr "Cura-profiilin kirjoitin"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Tukee X3D-tiedostojen lukemista."
+msgid "Provides support for reading model files."
+msgstr ""
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D-lukija"
+msgid "Trimesh Reader"
+msgstr ""
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr ""
+msgid "Checks for firmware updates."
+msgstr "Tarkistaa laiteohjelmistopäivitykset."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr ""
+msgid "Firmware Update Checker"
+msgstr "Laiteohjelmiston päivitysten tarkistus"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgid "Logs certain events so that they can be used by the crash reporter"
 msgstr ""
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
+msgid "Sentry Logger"
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgid "Provides a monitor stage in Cura."
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
+msgid "Monitor Stage"
 msgstr ""
 
 #: RemovableDriveOutputDevice/plugin.json
@@ -5957,105 +5952,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Irrotettavan aseman tulostusvälineen laajennus"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
+msgid "Provides support for reading AMF files."
 msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
+msgid "AMF Reader"
 msgstr ""
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Tukee profiilien tuontia aikaisemmista Cura-versioista."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr ""
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Aikaisempien Cura-profiilien lukija"
+msgid "UFP Reader"
+msgstr ""
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Tukee 3MF-tiedostojen lukemista."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr ""
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF-lukija"
+msgid "Ultimaker Digital Library"
+msgstr ""
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr ""
+msgid "Provides the Per Model Settings."
+msgstr "Mallikohtaisten asetusten muokkaus."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr ""
+msgid "Per Model Settings Tool"
+msgstr "Mallikohtaisten asetusten työkalu"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
+msgid "Provides a machine actions for updating firmware."
 msgstr ""
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
+msgid "Firmware Updater"
 msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Tukee profiilien tuontia GCode-tiedostoista."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
+msgid "Ultimaker Network Connection"
 msgstr ""
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
 msgstr ""
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
+msgid "Model Checker"
 msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Näyttää kerrosnäkymän."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Kerrosnäkymä"
+msgid "Simulation View"
+msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Linkki CuraEngine-viipalointiin taustalla."
+msgid "Writes g-code to a file."
+msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine-taustaosa"
+msgid "G-code Writer"
+msgstr ""
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr ""
+msgid "Provides support for writing 3MF files."
+msgstr "Tukee 3MF-tiedostojen kirjoittamista."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr ""
+msgid "3MF Writer"
+msgstr "3MF-kirjoitin"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6067,55 +6062,35 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr ""
 
-#: PostProcessingPlugin/plugin.json
-msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Lisäosa, jonka avulla käyttäjät voivat luoda komentosarjoja jälkikäsittelyä varten"
-
-#: PostProcessingPlugin/plugin.json
-msgctxt "name"
-msgid "Post Processing"
-msgstr "Jälkikäsittely"
-
-#: CuraProfileWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Tukee Cura-profiilien vientiä."
-
-#: CuraProfileWriter/plugin.json
-msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura-profiilin kirjoitin"
-
-#: USBPrinting/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Hyväksyy GCode-määrittelyt ja lähettää ne tulostimeen. Lisäosa voi myös päivittää laiteohjelmiston."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Mahdollistaa XML-pohjaisten materiaaliprofiilien lukemisen ja kirjoittamisen."
 
-#: USBPrinting/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB-tulostus"
+msgid "Material Profiles"
+msgstr "Materiaaliprofiilit"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr ""
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Linkki CuraEngine-viipalointiin taustalla."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr ""
+msgid "CuraEngine Backend"
+msgstr "CuraEngine-taustaosa"
 
-#: GCodeReader/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Mahdollistaa GCode-tiedostojen lataamisen ja näyttämisen."
+msgid "Provides support for reading X3D files."
+msgstr "Tukee X3D-tiedostojen lukemista."
 
-#: GCodeReader/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "GCode-lukija"
+msgid "X3D Reader"
+msgstr "X3D-lukija"
 
 #: ImageReader/plugin.json
 msgctxt "description"
@@ -6127,174 +6102,174 @@ msgctxt "name"
 msgid "Image Reader"
 msgstr "Kuvanlukija"
 
-#: UltimakerMachineActions/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr ""
+msgid "Provides support for reading 3MF files."
+msgstr "Tukee 3MF-tiedostojen lukemista."
 
-#: UltimakerMachineActions/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker-laitteen toiminnot"
+msgid "3MF Reader"
+msgstr "3MF-lukija"
 
-#: GCodeGzWriter/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
+msgid "Provides support for writing Ultimaker Format Packages."
 msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
+msgid "UFP Writer"
 msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Tarkistaa laiteohjelmistopäivitykset."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Tukee profiilien tuontia aikaisemmista Cura-versioista."
 
-#: FirmwareUpdateChecker/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Laiteohjelmiston päivitysten tarkistus"
+msgid "Legacy Cura Profile Reader"
+msgstr "Aikaisempien Cura-profiilien lukija"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Lähettää anonyymiä viipalointitietoa. Voidaan lisäasetuksista kytkeä pois käytöstä."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr ""
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Viipalointitiedot"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Mahdollistaa XML-pohjaisten materiaaliprofiilien lukemisen ja kirjoittamisen."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.1 versioon Cura 2.2."
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Materiaaliprofiilit"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Päivitys versiosta 2.1 versioon 2.2"
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
 msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
+msgid "Version Upgrade 4.1 to 4.2"
 msgstr ""
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
 msgstr ""
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Toolbox"
+msgid "Version Upgrade 4.13 to 5.0"
 msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
 msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
+msgid "Version Upgrade 4.5 to 4.6"
 msgstr ""
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
 msgstr ""
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Simulation View"
+msgid "Version Upgrade 3.3 to 3.4"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
+msgid "Version Upgrade 4.8 to 4.9"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.5 versioon Cura 2.6."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.7 versioon Cura 3.0."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Päivitys versiosta 2.5 versioon 2.6"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Päivitys versiosta 2.7 versioon 3.0"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgid "Version Upgrade 4.4 to 4.5"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
+msgid "Version Upgrade 3.0 to 3.1"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.1 versioon Cura 2.2."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.6 versioon Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Päivitys versiosta 2.1 versioon 2.2"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Päivitys versiosta 2.6 versioon 2.7"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
+msgid "Version Upgrade 4.2 to 4.3"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
+msgid "Version Upgrade 4.0 to 4.1"
 msgstr ""
 
 #: VersionUpgrade/VersionUpgrade462to47/plugin.json
@@ -6307,55 +6282,75 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.2 to 4.7"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
+msgid "Version Upgrade 4.9 to 4.10"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.2 versioon Cura 2.4."
+
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Päivitys versiosta 2.2 versioon 2.4"
+
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
+msgid "Version Upgrade 3.2 to 3.3"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.5 versioon Cura 2.6."
+
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Päivitys versiosta 2.5 versioon 2.6"
+
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.7 versioon Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Päivitys versiosta 2.7 versioon 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.6 versioon Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Päivitys versiosta 2.6 versioon 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr ""
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6367,104 +6362,114 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgid "Backup and restore your configuration."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
+msgid "Cura Backups"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr ""
+msgid "Provides support for importing Cura profiles."
+msgstr "Tukee Cura-profiilien tuontia."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr ""
+msgid "Cura Profile Reader"
+msgstr "Cura-profiilin lukija"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr ""
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Lähettää anonyymiä viipalointitietoa. Voidaan lisäasetuksista kytkeä pois käytöstä."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
+msgid "Slice info"
+msgstr "Viipalointitiedot"
+
+#: GCodeProfileReader/plugin.json
+msgctxt "description"
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Tukee profiilien tuontia GCode-tiedostoista."
+
+#: GCodeProfileReader/plugin.json
+msgctxt "name"
+msgid "G-code Profile Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgid "Writes g-code to a compressed archive."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
+msgid "Compressed G-code Writer"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.2 versioon Cura 2.4."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Lisäosa, jonka avulla käyttäjät voivat luoda komentosarjoja jälkikäsittelyä varten"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Päivitys versiosta 2.2 versioon 2.4"
+msgid "Post Processing"
+msgstr "Jälkikäsittely"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
+msgid "Support Eraser"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgid "Provides a preview stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
+msgid "Preview Stage"
 msgstr ""
 
-#: UM3NetworkPrinting/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr ""
+msgid "Provides the X-Ray view."
+msgstr "Näyttää kerrosnäkymän."
 
-#: UM3NetworkPrinting/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr ""
+msgid "X-Ray View"
+msgstr "Kerrosnäkymä"
 
-#: TrimeshReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
 msgstr ""
 
-#: TrimeshReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr ""
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker-laitteen toiminnot"
 
-#: UFPReader/plugin.json
+#: Marketplace/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
 msgstr ""
 
-#: UFPReader/plugin.json
+#: Marketplace/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
+msgid "Marketplace"
 msgstr ""
 
 #: SolidView/plugin.json
@@ -6477,35 +6482,83 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Kiinteä näkymä"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Tukee 3MF-tiedostojen kirjoittamista."
+msgid "Allows loading and displaying G-code files."
+msgstr "Mahdollistaa GCode-tiedostojen lataamisen ja näyttämisen."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF-kirjoitin"
+msgid "G-code Reader"
+msgstr "GCode-lukija"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
 msgstr ""
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
+msgid "Machine Settings Action"
 msgstr ""
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr ""
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Hyväksyy GCode-määrittelyt ja lähettää ne tulostimeen. Lisäosa voi myös päivittää laiteohjelmiston."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr ""
+msgid "USB printing"
+msgstr "USB-tulostus"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Lisäosan lisenssisopimus"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Muunna kuva..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "Leveys millimetreinä alustalla."
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Asennettu"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Luo"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Jäljennös"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Tulostin: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Päivitä nykyiset asetukset tai ohitukset profiiliin"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Teema:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Sovellus on käynnistettävä uudelleen, jotta nämä muutokset tulevat voimaan."
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Luo"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Yksikkö"
 
 #~ msgctxt "@info:title The %s gets replaced with the printer name."
 #~ msgid "New %s firmware available"
diff --git a/resources/i18n/fi_FI/fdmextruder.def.json.po b/resources/i18n/fi_FI/fdmextruder.def.json.po
index a814af04d4..f7484a2f3e 100644
--- a/resources/i18n/fi_FI/fdmextruder.def.json.po
+++ b/resources/i18n/fi_FI/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2017-08-11 14:31+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
diff --git a/resources/i18n/fi_FI/fdmprinter.def.json.po b/resources/i18n/fi_FI/fdmprinter.def.json.po
index ba8d2db2c2..292d301599 100644
--- a/resources/i18n/fi_FI/fdmprinter.def.json.po
+++ b/resources/i18n/fi_FI/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2017-09-27 12:27+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
@@ -461,8 +461,8 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "2D-siluetti tulostuspäästä (tuulettimen päät mukaan lukien)"
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -735,6 +735,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Laatu"
@@ -955,6 +965,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Seinämien lukumäärä. Kun se lasketaan seinämän paksuudesta, arvo pyöristetään kokonaislukuun."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Ulkoseinämän täyttöliikkeen etäisyys"
@@ -985,14 +1045,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Ulkoseinämät ennen sisäseinämiä"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Seinämät tulostetaan ulkoa sisäänpäin, kun tämä on käytössä. Asetuksella voidaan auttaa parantamaan X:n ja Y:n dimensiotarkkuutta ABS:n kaltaista korkeaviskoosista muovia käytettäessä. Se voi kuitenkin heikentää ulkopinnan tulostuslaatua etenkin ulokkeissa."
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1005,94 +1075,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Tulostaa ylimääräisen seinämän joka toiseen kerrokseen. Näin täyttömateriaali jää kiinni näiden lisäseinämien väliin, mikä johtaa vahvempiin tulosteisiin."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Kompensoi seinämän limityksiä"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Kompensoi tulostettaessa virtausta niiden seinämien osien kohdalla, joissa on jo olemassa seinämä."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Kompensoi ulkoseinämän limityksiä"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Kompensoi tulostettaessa virtausta niiden ulkoseinämien osien kohdalla, joissa on jo olemassa seinämä."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Kompensoi sisäseinämän limityksiä"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Kompensoi tulostettaessa virtausta niiden sisäseinämien osien kohdalla, joissa on jo olemassa seinämä."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Täytä seinämien väliset raot"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Täyttää raot seinämien välissä, kun seinämät eivät ole sopivia."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Ei missään"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Tulosta ohuet seinämät"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Kaikkialla"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Tulostaa mallin kohtia, jotka ovat vaakasuunnassa suuttimen kokoa ohuempia."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Tulosta ohuet seinämät"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Tulostaa mallin kohtia, jotka ovat vaakasuunnassa suuttimen kokoa ohuempia."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2192,6 +2252,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr ""
@@ -2702,24 +2782,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "Muutama ensimmäinen kerros tulostetaan hitaammin kuin loput mallista, jolloin saadaan parempi tarttuvuus alustaan ja parannetaan tulosteiden yleistä onnistumista. Näiden kerrosten jälkeen nopeutta lisätään asteittain."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Yhdenmukaista tulostuslangan virtaus"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Normaaleja ohuempien linjojen tulostus nopeammin niin, että pursotetun materiaalin määrä sekunnissa pysyy samana. Mallin ohuet kappaleet saattavat edellyttää asetuksia pienemmällä linjan leveydellä tulostettuja linjoja. Tällä asetuksella hallitaan tällaisten linjojen nopeuden muutoksia."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Virtauksen yhdenmukaistamisen maksiminopeus"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Tulostuksen maksiminopeus, kun tulostusnopeutta säädetään virtauksen yhdenmukaistamista varten."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4457,6 +4527,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "Helman/reunuksen/pohjaristikon tulostukseen käytettävä suulakeryhmä. Tätä käytetään monipursotuksessa."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Helman linjaluku"
@@ -4619,6 +4729,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "Pohjaristikon pintakerrosten linjojen välinen etäisyys. Linjajaon tulisi olla sama kuin linjaleveys, jotta pinta on kiinteä."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Pohjaristikon keskikerroksen paksuus"
@@ -5119,6 +5239,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Erikoistilat"
@@ -6413,6 +6543,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Komentorivin asetukset"
@@ -6472,6 +6632,74 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Mallissa käytettävä muunnosmatriisi, kun malli ladataan tiedostosta."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "2D-siluetti tulostuspäästä (tuulettimen päät mukaan lukien)"
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Ulkoseinämät ennen sisäseinämiä"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Seinämät tulostetaan ulkoa sisäänpäin, kun tämä on käytössä. Asetuksella voidaan auttaa parantamaan X:n ja Y:n dimensiotarkkuutta ABS:n kaltaista korkeaviskoosista muovia käytettäessä. Se voi kuitenkin heikentää ulkopinnan tulostuslaatua etenkin ulokkeissa."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Kompensoi seinämän limityksiä"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Kompensoi tulostettaessa virtausta niiden seinämien osien kohdalla, joissa on jo olemassa seinämä."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Kompensoi ulkoseinämän limityksiä"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Kompensoi tulostettaessa virtausta niiden ulkoseinämien osien kohdalla, joissa on jo olemassa seinämä."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Kompensoi sisäseinämän limityksiä"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Kompensoi tulostettaessa virtausta niiden sisäseinämien osien kohdalla, joissa on jo olemassa seinämä."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Täytä seinämien väliset raot"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Täyttää raot seinämien välissä, kun seinämät eivät ole sopivia."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Ei missään"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Kaikkialla"
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Yhdenmukaista tulostuslangan virtaus"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Normaaleja ohuempien linjojen tulostus nopeammin niin, että pursotetun materiaalin määrä sekunnissa pysyy samana. Mallin ohuet kappaleet saattavat edellyttää asetuksia pienemmällä linjan leveydellä tulostettuja linjoja. Tällä asetuksella hallitaan tällaisten linjojen nopeuden muutoksia."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Virtauksen yhdenmukaistamisen maksiminopeus"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Tulostuksen maksiminopeus, kun tulostusnopeutta säädetään virtauksen yhdenmukaistamista varten."
+
 #~ msgctxt "machine_max_feedrate_e label"
 #~ msgid "Maximum Feedrate"
 #~ msgstr "Maksimisyöttönopeus"
diff --git a/resources/i18n/fr_FR/cura.po b/resources/i18n/fr_FR/cura.po
index f8a41bc81c..bcb3ba971a 100644
--- a/resources/i18n/fr_FR/cura.po
+++ b/resources/i18n/fr_FR/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2021-09-07 07:48+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: French <info@lionbridge.com>, French <info@bothof.nl>\n"
@@ -17,1507 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 "X-Generator: Poedit 3.0\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Impossible de créer une archive à partir du répertoire de données de l'utilisateur : {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Sauvegarde"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "A essayé de restaurer une sauvegarde Cura sans disposer de données ou de métadonnées appropriées."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "A essayé de restaurer une sauvegarde Cura supérieure à la version actuelle."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "L'erreur suivante s'est produite lors de la restauration d'une sauvegarde Cura :"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Veuillez synchroniser les profils de matériaux avec vos imprimantes avant de commencer à imprimer."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Nouveaux matériaux installés"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Synchroniser les matériaux"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "En savoir plus"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "Impossible d'enregistrer l'archive du matériau dans {} :"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Échec de l'enregistrement de l'archive des matériaux"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Erreur inconnue."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "La hauteur du volume d'impression a été réduite en raison de la valeur du paramètre « Séquence d'impression » afin d'éviter que le portique ne heurte les modèles imprimés."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volume d'impression"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Voulez-vous vraiment supprimer l'objet {0} ? Cette action est irréversible !"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Pas écrasé"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Inconnu"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Les imprimantes ci-dessous ne peuvent pas être connectées car elles font partie d'un groupe"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Imprimantes en réseau disponibles"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Préparer"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Profil Cura"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Personnaliser les profils"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Ouvrir le maillage triangulaire compressé"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Tous les types supportés ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Tous les fichiers (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visuel"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Le profil visuel est conçu pour imprimer des prototypes et des modèles visuels dans le but d'obtenir une qualité visuelle et de surface élevée."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Le profil d'ingénierie est conçu pour imprimer des prototypes fonctionnels et des pièces finales dans le but d'obtenir une meilleure précision et des tolérances plus étroites."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Ébauche"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "L'ébauche du profil est conçue pour imprimer les prototypes initiaux et la validation du concept dans le but de réduire considérablement le temps d'impression."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Matériau personnalisé"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Personnalisé"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "La connexion a échoué"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Recherche d'un nouvel emplacement pour les objets"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Recherche d'emplacement"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Impossible de trouver un emplacement dans le volume d'impression pour tous les objets"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Impossible de trouver un emplacement"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Échec de la création de l'archive des matériaux à synchroniser avec les imprimantes."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Impossible de charger l'archive des matériaux pour la synchroniser avec les imprimantes."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "La réponse de Digital Factory semble être corrompue."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "Il manque des informations importantes dans la réponse de Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Échec de la connexion à Digital Factory pour synchroniser les matériaux avec certaines imprimantes."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Échec de la connexion à Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Chargement des machines..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Configuration des préférences..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Initialisation de la machine active..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Initialisation du gestionnaire de machine..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Initialisation du volume de fabrication..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Préparation de la scène..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Chargement de l'interface..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Initialisation du moteur..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Un seul fichier G-Code peut être chargé à la fois. Importation de {0} sautée"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Avertissement"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Impossible d'ouvrir un autre fichier si le G-Code est en cours de chargement. Importation de {0} sautée"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Erreur"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Passer"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Fermer"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Suivant"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Fin"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Ajouter"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Annuler"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Groupe nº {group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Paroi externe"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Parois internes"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Couche extérieure"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Remplissage"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Remplissage du support"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Interface du support"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Support"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Jupe"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Tour primaire"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Déplacement"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Rétractions"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Autre"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "Les notes de version n'ont pas pu être ouvertes."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Échec du démarrage de Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>Oups, un problème est survenu dans Ultimaker Cura.</p></b>\n"
-"                    <p>Une erreur irrécupérable est survenue lors du démarrage. Elle peut avoir été causée par des fichiers de configuration incorrects. Nous vous suggérons de sauvegarder et de réinitialiser votre configuration.</p>\n"
-"                    <p>Les sauvegardes se trouvent dans le dossier de configuration.</p>\n"
-"                    <p>Veuillez nous envoyer ce rapport d'incident pour que nous puissions résoudre le problème.</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Envoyer le rapport de d'incident à Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Afficher le rapport d'incident détaillé"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Afficher le dossier de configuration"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Sauvegarder et réinitialiser la configuration"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Rapport d'incident"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Une erreur fatale est survenue dans Cura. Veuillez nous envoyer ce rapport d'incident pour résoudre le problème</p></b>\n"
-"            <p>Veuillez utiliser le bouton « Envoyer rapport » pour publier automatiquement un rapport d'erreur sur nos serveurs</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Informations système"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Inconnu"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Version Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Langue de Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "Langue du SE"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Plate-forme"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Version Qt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "Version PyQt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Pas encore initialisé<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>Version OpenGL : {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>Revendeur OpenGL : {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>Moteur de rendu OpenGL : {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Retraçage de l'erreur"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Journaux"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Envoyer rapport"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Impossible de lancer une nouvelle procédure de connexion. Vérifiez si une autre tentative de connexion est toujours active."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Impossible d’atteindre le serveur du compte Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "Échec de la connexion"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "L'état fourni n'est pas correct."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Délai d'expiration lors de l'authentification avec le serveur de compte."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Veuillez donner les permissions requises lors de l'autorisation de cette application."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Une erreur s'est produite lors de la connexion, veuillez réessayer."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Impossible de lire la réponse."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Multiplication et placement d'objets"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Placement des objets"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Placement de l'objet"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Non pris en charge"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Buse"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Les paramètres ont été modifiés pour correspondre aux extrudeuses actuellement disponibles :"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Paramètres mis à jour"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extrudeuse(s) désactivée(s)"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Le fichier existe déjà"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Le fichier <filename>{0}</filename> existe déjà. Êtes-vous sûr de vouloir le remplacer ?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "URL de fichier invalide :"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : le plug-in du générateur a rapporté une erreur."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Profil exporté vers <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "L'exportation a réussi"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> : {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> avant l'ajout d'une imprimante."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Aucun profil personnalisé à importer dans le fichier <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Le profil <filename>{0}</filename> contient des données incorrectes ; échec de l'importation."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "Importation du profil {0} réussie."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "Le fichier {0} ne contient pas de profil valide."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Le profil {0} est un type de fichier inconnu ou est corrompu."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Personnaliser le profil"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Il manque un type de qualité au profil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Aucune imprimante n'est active pour le moment."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "Impossible d'ajouter le profil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "Le type de qualité « {0} » n'est pas compatible avec la définition actuelle de la machine active « {1} »."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Avertissement : le profil n'est pas visible car son type de qualité « {0} » n'est pas disponible pour la configuration actuelle. Passez à une combinaison matériau/buse qui peut utiliser ce type de qualité."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Paramètres par modèle"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configurer les paramètres par modèle"
+msgid "glTF Binary"
+msgstr "glTF binaire"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Profil Cura"
+msgid "glTF Embedded JSON"
+msgstr "glTF incorporé JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Fichier X3D"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Une erreur s’est produite lors de la tentative de restauration de votre sauvegarde."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Sauvegardes"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Une erreur s’est produite lors du téléchargement de votre sauvegarde."
+msgid "Stanford Triangle Format"
+msgstr "Format Triangle de Stanford"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Création de votre sauvegarde..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange compressé"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Une erreur s'est produite lors de la création de votre sauvegarde."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Impossible d'accéder aux informations de mise à jour."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Téléchargement de votre sauvegarde..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "De nouvelles fonctionnalités ou des correctifs de bugs sont disponibles pour votre {machine_name} ! Si vous ne l'avez pas encore fait, il est recommandé de mettre à jour le micrologiciel de votre imprimante avec la version {latest_version}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Le téléchargement de votre sauvegarde est terminé."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "Nouveau %s firmware stable disponible"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "La sauvegarde dépasse la taille de fichier maximale."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Comment effectuer la mise à jour"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Gérer les sauvegardes"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Paramètres de la machine"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blocage des supports"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Créer un volume dans lequel les supports ne sont pas imprimés."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Lecteur amovible"
+msgid "Monitor"
+msgstr "Surveiller"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Enregistrer sur un lecteur amovible"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Enregistrer sur un lecteur amovible {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Aucun format de fichier n'est disponible pour écriture !"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Enregistrement sur le lecteur amovible <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Enregistrement"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Impossible d'enregistrer <filename>{0}</filename> : <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Impossible de trouver un nom de fichier lors d'une tentative d'écriture sur {device}."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Impossible d'enregistrer sur le lecteur {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Erreur"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Enregistré sur le lecteur amovible {0} sous {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Fichier enregistré"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Ejecter"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Ejecter le lecteur amovible {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Lecteur {0} éjecté. Vous pouvez maintenant le retirer en tout sécurité."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Retirez le lecteur en toute sécurité"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Impossible d'éjecter {0}. Un autre programme utilise peut-être ce lecteur."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Mettre à jour le firmware"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profils Cura 15.04"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Recommandé"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personnalisé"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Le fichier projet <filename>{0}</filename> contient un type de machine inconnu <message>{1}</message>. Impossible d'importer la machine. Les modèles seront importés à la place."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Ouvrir un fichier de projet"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Le fichier de projet <filename>{0}</filename> est soudainement inaccessible : <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Impossible d'ouvrir le fichier de projet"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "Le fichier de projet <filename>{0}</filename> est corrompu : <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Le fichier de projet <filename>{0}</filename> a été réalisé en utilisant des profils inconnus de cette version d'Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Fichier 3MF"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Impossible d'écrire dans le fichier UFP :"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Format Package"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Fichier GCode"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Aperçu"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Visualisation par rayons X"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Traitement des couches"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informations"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "Échec de la découpe avec une erreur inattendue. Signalez un bug sur notre outil de suivi des problèmes."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "Échec de la découpe"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Notifier un bug"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Notifiez un bug sur l'outil de suivi des problèmes d'Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Impossible de découper le matériau actuel, car celui-ci est incompatible avec la machine ou la configuration sélectionnée."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Impossible de découper"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Impossible de couper avec les paramètres actuels. Les paramètres suivants contiennent des erreurs : {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Impossible de couper en raison de certains paramètres par modèle. Les paramètres suivants contiennent des erreurs sur un ou plusieurs modèles : {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Impossible de couper car la tour primaire ou la (les) position(s) d'amorçage ne sont pas valides."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Impossible de couper car il existe des objets associés à l'extrudeuse désactivée %s."
+msgid "Warning"
+msgstr "Avertissement"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Veuillez vérifier les paramètres et si vos modèles :\n"
-"- S'intègrent dans le volume de fabrication\n"
-"- Sont affectés à un extrudeur activé\n"
-"- N sont pas tous définis comme des mailles de modificateur"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Lecteur amovible"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "Fichier AMF"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Fichier G-Code compressé"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Post-traitement"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modifier le G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Impression par USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Imprimer via USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Imprimer via USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Connecté via USB"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Format Package"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Une impression USB est en cours, la fermeture de Cura arrêtera cette impression. Êtes-vous sûr ?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Une impression est encore en cours. Cura ne peut pas démarrer une autre impression via USB tant que l'impression précédente n'est pas terminée."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Impression en cours"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Préparer"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Analyse du G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Détails G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Assurez-vous que le g-code est adapté à votre imprimante et à la configuration de l'imprimante avant d'y envoyer le fichier. La représentation du g-code peut ne pas être exacte."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Fichier G"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Image JPG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Image JPEG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Image PNG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Image BMP"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Image GIF"
+msgid "Per Model Settings"
+msgstr "Paramètres par modèle"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Nivellement du plateau"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configurer les paramètres par modèle"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Sélectionner les mises à niveau"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter ne prend pas en charge le mode texte."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Impossible d'accéder aux informations de mise à jour."
+msgid "Update Firmware"
+msgstr "Mettre à jour le firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "De nouvelles fonctionnalités ou des correctifs de bugs sont disponibles pour votre {machine_name} ! Si vous ne l'avez pas encore fait, il est recommandé de mettre à jour le micrologiciel de votre imprimante avec la version {latest_version}."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "Nouveau %s firmware stable disponible"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Comment effectuer la mise à jour"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "Impossible de lire le fichier de données d'exemple."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "Vous devez quitter et redémarrer {} avant que les changements apportés ne prennent effet."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchronisation..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Changements détectés à partir de votre compte Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Vous souhaitez synchroniser du matériel et des logiciels avec votre compte ?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchroniser"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Décliner et supprimer du compte"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Échec de téléchargement des plugins {}"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Refuser"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Accepter"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Plug-in d'accord de licence"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter ne prend pas en charge le mode non-texte."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Veuillez préparer le G-Code avant d'exporter."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Cura n'affiche pas les couches avec précision lorsque l'impression filaire est activée."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura a détecté des profils de matériau qui ne sont pas encore installés sur l'imprimante hôte du groupe {0}."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Vue simulation"
+msgid "Sending materials to printer"
+msgstr "Envoi de matériaux à l'imprimante"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Rien ne s'affiche car vous devez d'abord découper."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Vous tentez de vous connecter à {0} mais ce n'est pas l'hôte de groupe. Vous pouvez visiter la page Web pour la configurer en tant qu'hôte de groupe."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Pas de couches à afficher"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Ne plus afficher ce message"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Vue en couches"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Imprimer sur le réseau"
+msgid "Not a group host"
+msgstr "Pas un hôte de groupe"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Imprimer sur le réseau"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Configurer le groupe"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Connecté sur le réseau"
+msgid "Sending Print Job"
+msgstr "Lancement d'une tâche d'impression"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "demain"
+msgid "Uploading print job to printer."
+msgstr "Téléchargement de la tâche d'impression sur l'imprimante."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "aujourd'hui"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "La file d'attente pour les tâches d'impression est pleine. L'imprimante ne peut pas accepter une nouvelle tâche."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Connecter via le réseau"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "La file d'attente est pleine"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Veuillez patienter jusqu'à ce que la tâche en cours ait été envoyée."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Erreur d'impression"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "L'envoi de la tâche d'impression à l'imprimante a réussi."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Données envoyées"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Vous tentez de vous connecter à une imprimante qui n'exécute pas Ultimaker Connect. Veuillez mettre à jour l'imprimante avec le dernier micrologiciel."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Mettre à jour votre imprimante"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "La file d'attente pour les tâches d'impression est pleine. L'imprimante ne peut pas accepter une nouvelle tâche."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "La file d'attente est pleine"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Lancement d'une tâche d'impression"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Téléchargement de la tâche d'impression sur l'imprimante."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura a détecté des profils de matériau qui ne sont pas encore installés sur l'imprimante hôte du groupe {0}."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Envoi de matériaux à l'imprimante"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Impossible de transférer les données à l'imprimante."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Erreur de réseau"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Vous tentez de vous connecter à {0} mais ce n'est pas l'hôte de groupe. Vous pouvez visiter la page Web pour la configurer en tant qu'hôte de groupe."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Pas un hôte de groupe"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Configurer le groupe"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1527,66 +296,85 @@ msgstr ""
 "Votre imprimante <b>{printer_name} </b> pourrait être connectée via le cloud.\n"
 " Gérez votre file d'attente d'impression et surveillez vos impressions depuis n'importe où en connectant votre imprimante à Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "Êtes-vous prêt pour l'impression dans le cloud ?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Prise en main"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "En savoir plus"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Imprimer via le cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Vous tentez de vous connecter à une imprimante qui n'exécute pas Ultimaker Connect. Veuillez mettre à jour l'imprimante avec le dernier micrologiciel."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Mettre à jour votre imprimante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Impossible de transférer les données à l'imprimante."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Erreur de réseau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Imprimer sur le réseau"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Imprimer via le cloud"
+msgid "Print over network"
+msgstr "Imprimer sur le réseau"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Connecté via le cloud"
+msgid "Connected over the network"
+msgstr "Connecté sur le réseau"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Surveiller l'impression"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "demain"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Suivre l'impression dans Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "aujourd'hui"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Code d'erreur inconnu lors du téléchargement d'une tâche d'impression : {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Connecter via le réseau"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nouvelle imprimante détectée à partir de votre compte Ultimaker"
 msgstr[1] "Nouvelles imprimantes détectées à partir de votre compte Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Ajout de l'imprimante {name} ({model}) à partir de votre compte"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1594,71 +382,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... et {0} autre"
 msgstr[1] "... et {0} autres"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Imprimantes ajoutées à partir de Digital Factory :"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Une connexion cloud n'est pas disponible pour une imprimante"
 msgstr[1] "Une connexion cloud n'est pas disponible pour certaines imprimantes"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Cette imprimante n'est pas associée à Digital Factory :"
 msgstr[1] "Ces imprimantes ne sont pas associées à Digital Factory :"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Pour établir une connexion, veuillez visiter le site {website_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Conserver les configurations d'imprimante"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Supprimer des imprimantes"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "L'imprimante {printer_name} sera supprimée jusqu'à la prochaine synchronisation de compte."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Pour supprimer {printer_name} définitivement, visitez le site {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Voulez-vous vraiment supprimer {printer_name} temporairement ?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Supprimer des imprimantes ?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1674,7 +462,7 @@ msgstr[1] ""
 "Vous êtes sur le point de supprimer {0} imprimantes de Cura. Cette action est irréversible.\n"
 "Voulez-vous vraiment continuer ?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1683,2078 +471,3123 @@ msgstr ""
 "Vous êtes sur le point de supprimer toutes les imprimantes de Cura. Cette action est irréversible.\n"
 "Voulez-vous vraiment continuer ?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Ouvrir le maillage triangulaire compressé"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Imprimer via le cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Imprimer via le cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF binaire"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Connecté via le cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF incorporé JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Surveiller l'impression"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Format Triangle de Stanford"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Suivre l'impression dans Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange compressé"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Code d'erreur inconnu lors du téléchargement d'une tâche d'impression : {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Assistant de modèle 3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "Les zones surlignées indiquent que des surfaces manquent ou sont étrangères. Réparez votre modèle et ouvrez-le à nouveau dans Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Un ou plusieurs modèles 3D peuvent ne pas s'imprimer de manière optimale en raison de la taille du modèle et de la configuration matérielle :</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Découvrez comment optimiser la qualité et la fiabilité de l'impression.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Consultez le guide de qualité d'impression</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Cura n'affiche pas les couches avec précision lorsque l'impression filaire est activée."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Erreurs du modèle"
+msgid "Simulation View"
+msgstr "Vue simulation"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Vue solide"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Rien ne s'affiche car vous devez d'abord découper."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Pas de couches à afficher"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Ne plus afficher ce message"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Vue en couches"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter ne prend pas en charge le mode non-texte."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Veuillez préparer le G-Code avant d'exporter."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Fichier GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Erreur d'écriture du fichier 3MF."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "Le plug-in 3MF Writer est corrompu."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Il n'y a pas encore d'espace de travail à écrire. Veuillez d'abord ajouter une imprimante."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Aucune autorisation d'écrire l'espace de travail ici."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "Le système d'exploitation ne permet pas d'enregistrer un fichier de projet à cet emplacement ou avec ce nom de fichier."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "Fichier 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Projet Cura fichier 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Surveiller"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Fichier G-Code compressé"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "Échec de la découpe avec une erreur inattendue. Signalez un bug sur notre outil de suivi des problèmes."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "Échec de la découpe"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Notifier un bug"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Notifiez un bug sur l'outil de suivi des problèmes d'Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Impossible de découper le matériau actuel, car celui-ci est incompatible avec la machine ou la configuration sélectionnée."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Assistant de modèle 3D"
+msgid "Unable to slice"
+msgstr "Impossible de découper"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Impossible de couper avec les paramètres actuels. Les paramètres suivants contiennent des erreurs : {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Impossible de couper en raison de certains paramètres par modèle. Les paramètres suivants contiennent des erreurs sur un ou plusieurs modèles : {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Impossible de couper car la tour primaire ou la (les) position(s) d'amorçage ne sont pas valides."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Impossible de couper car il existe des objets associés à l'extrudeuse désactivée %s."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>Un ou plusieurs modèles 3D peuvent ne pas s'imprimer de manière optimale en raison de la taille du modèle et de la configuration matérielle :</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Découvrez comment optimiser la qualité et la fiabilité de l'impression.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Consultez le guide de qualité d'impression</a></p>"
+"Veuillez vérifier les paramètres et si vos modèles :\n"
+"- S'intègrent dans le volume de fabrication\n"
+"- Sont affectés à un extrudeur activé\n"
+"- N sont pas tous définis comme des mailles de modificateur"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Type de maille"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Traitement des couches"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Modèle normal"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informations"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Imprimer comme support"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Fichier X3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Modifier les paramètres de chevauchement"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Image JPG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Ne prend pas en charge le chevauchement"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Image JPEG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Maille de remplissage uniquement"
+msgid "PNG Image"
+msgstr "Image PNG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Maille de coupe"
+msgid "BMP Image"
+msgstr "Image BMP"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Sélectionner les paramètres"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Image GIF"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Sélectionner les paramètres pour personnaliser ce modèle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Buse"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtrer..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Le fichier projet <filename>{0}</filename> contient un type de machine inconnu <message>{1}</message>. Impossible d'importer la machine. Les modèles seront importés à la place."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Afficher tout"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Ouvrir un fichier de projet"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Sauvegardes Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Le fichier de projet <filename>{0}</filename> est soudainement inaccessible : <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Version Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Impossible d'ouvrir le fichier de projet"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Machines"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "Le fichier de projet <filename>{0}</filename> est corrompu : <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Matériaux"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Le fichier de projet <filename>{0}</filename> a été réalisé en utilisant des profils inconnus de cette version d'Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profils"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Recommandé"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plug-ins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personnalisé"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Vous en voulez plus ?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "Fichier 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Sauvegarder maintenant"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Impossible d'écrire dans le fichier UFP :"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Sauvegarde automatique"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profils Cura 15.04"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Créez automatiquement une sauvegarde chaque jour où Cura est démarré."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Sauvegardes"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Restaurer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Une erreur s’est produite lors du téléchargement de votre sauvegarde."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Supprimer la sauvegarde"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Création de votre sauvegarde..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Êtes-vous sûr de vouloir supprimer cette sauvegarde ? Il est impossible d'annuler cette action."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Une erreur s'est produite lors de la création de votre sauvegarde."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Restaurer la sauvegarde"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Téléchargement de votre sauvegarde..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Vous devez redémarrer Cura avant que votre sauvegarde ne soit restaurée. Voulez-vous fermer Cura maintenant ?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Le téléchargement de votre sauvegarde est terminé."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Sauvegardez et synchronisez vos paramètres Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "La sauvegarde dépasse la taille de fichier maximale."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Se connecter"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Gérer les sauvegardes"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Mes sauvegardes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Sauvegarde"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Vous n'avez actuellement aucune sauvegarde. Utilisez le bouton « Sauvegarder maintenant » pour en créer une."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Une erreur s’est produite lors de la tentative de restauration de votre sauvegarde."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Pendant la phase de prévisualisation, vous ne pourrez voir qu'un maximum de 5 sauvegardes. Supprimez une sauvegarde pour voir les plus anciennes."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "Impossible de lire le fichier de données d'exemple."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Paramètres de l'imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter ne prend pas en charge le mode texte."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Largeur)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Post-traitement"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modifier le G-Code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Profondeur)"
+msgid "Support Blocker"
+msgstr "Blocage des supports"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Hauteur)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Créer un volume dans lequel les supports ne sont pas imprimés."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forme du plateau"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Aperçu"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origine au centre"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Visualisation par rayons X"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Plateau chauffant"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Nivellement du plateau"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volume de fabrication chauffant"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Sélectionner les mises à niveau"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Parfum G-Code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Paramètres de la tête d'impression"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Hauteur du portique"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Nombre d'extrudeuses"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Appliquer les décalages offset de l'extrudeuse au GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "Les zones surlignées indiquent que des surfaces manquent ou sont étrangères. Réparez votre modèle et ouvrez-le à nouveau dans Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-Code de démarrage"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Erreurs du modèle"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-Code de fin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "En savoir plus"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Paramètres de la buse"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Vue solide"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Taille de la buse"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Analyse du G-Code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diamètre du matériau compatible"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Détails G-Code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Décalage buse X"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Assurez-vous que le g-code est adapté à votre imprimante et à la configuration de l'imprimante avant d'y envoyer le fichier. La représentation du g-code peut ne pas être exacte."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Décalage buse Y"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Fichier G"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Numéro du ventilateur de refroidissement"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Paramètres de la machine"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Extrudeuse G-Code de démarrage"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Impression par USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Extrudeuse G-Code de fin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Imprimer via USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Imprimer via USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Mettre à jour le firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Connecté via USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "Le firmware est le logiciel fonctionnant directement dans votre imprimante 3D. Ce firmware contrôle les moteurs pas à pas, régule la température et surtout, fait que votre machine fonctionne."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Une impression USB est en cours, la fermeture de Cura arrêtera cette impression. Êtes-vous sûr ?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Une impression est encore en cours. Cura ne peut pas démarrer une autre impression via USB tant que l'impression précédente n'est pas terminée."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Impression en cours"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Chargement des machines..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Configuration des préférences..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Initialisation de la machine active..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Initialisation du gestionnaire de machine..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Initialisation du volume de fabrication..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Préparation de la scène..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Chargement de l'interface..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Initialisation du moteur..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Un seul fichier G-Code peut être chargé à la fois. Importation de {0} sautée"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Impossible d'ouvrir un autre fichier si le G-Code est en cours de chargement. Importation de {0} sautée"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "Le firmware fourni avec les nouvelles imprimantes fonctionne, mais les nouvelles versions ont tendance à fournir davantage de fonctionnalités ainsi que des améliorations."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Mise à niveau automatique du firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visuel"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Charger le firmware personnalisé"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Le profil visuel est conçu pour imprimer des prototypes et des modèles visuels dans le but d'obtenir une qualité visuelle et de surface élevée."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "Impossible de se connecter à l'imprimante ; échec de la mise à jour du firmware."
+msgid "Engineering"
+msgstr "Engineering"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Le profil d'ingénierie est conçu pour imprimer des prototypes fonctionnels et des pièces finales dans le but d'obtenir une meilleure précision et des tolérances plus étroites."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "Échec de la mise à jour du firmware, car cette fonctionnalité n'est pas prise en charge par la connexion avec l'imprimante."
+msgid "Draft"
+msgstr "Ébauche"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Sélectionner le firmware personnalisé"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "L'ébauche du profil est conçue pour imprimer les prototypes initiaux et la validation du concept dans le but de réduire considérablement le temps d'impression."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Mise à jour du firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Pas écrasé"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Voulez-vous vraiment supprimer l'objet {0} ? Cette action est irréversible !"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Mise à jour du firmware en cours."
+msgid "Unknown"
+msgstr "Inconnu"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Mise à jour du firmware terminée."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Les imprimantes ci-dessous ne peuvent pas être connectées car elles font partie d'un groupe"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Échec de la mise à jour du firmware en raison d'une erreur inconnue."
+msgid "Available networked printers"
+msgstr "Imprimantes en réseau disponibles"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calculer"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Veuillez synchroniser les profils de matériaux avec vos imprimantes avant de commencer à imprimer."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Nouveaux matériaux installés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Échec de la mise à jour du firmware en raison d'une erreur de communication."
+msgid "Custom Material"
+msgstr "Matériau personnalisé"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Échec de la mise à jour du firmware en raison d'une erreur d'entrée/de sortie."
+msgid "Custom"
+msgstr "Personnalisé"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Échec de la mise à jour du firmware en raison du firmware manquant."
+msgid "Custom profiles"
+msgstr "Personnaliser les profils"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Ouvrir un projet"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Tous les types supportés ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Mettre à jour l'existant"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Tous les fichiers (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Créer"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Échec de la création de l'archive des matériaux à synchroniser avec les imprimantes."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Résumé - Projet Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Impossible de charger l'archive des matériaux pour la synchroniser avec les imprimantes."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Paramètres de l'imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "La réponse de Digital Factory semble être corrompue."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Comment le conflit de la machine doit-il être résolu ?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "Il manque des informations importantes dans la réponse de Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Type"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Échec de la connexion à Digital Factory pour synchroniser les matériaux avec certaines imprimantes."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Groupe d'imprimantes"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Échec de la connexion à Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Paramètres de profil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Impossible de créer une archive à partir du répertoire de données de l'utilisateur : {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Comment le conflit du profil doit-il être résolu ?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "A essayé de restaurer une sauvegarde Cura sans disposer de données ou de métadonnées appropriées."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nom"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "A essayé de restaurer une sauvegarde Cura supérieure à la version actuelle."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "L'erreur suivante s'est produite lors de la restauration d'une sauvegarde Cura :"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Absent du profil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Recherche d'un nouvel emplacement pour les objets"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 écrasent"
-msgstr[1] "%1 écrase"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Recherche d'emplacement"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Dérivé de"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Impossible de trouver un emplacement dans le volume d'impression pour tous les objets"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 écrasent"
-msgstr[1] "%1, %2 écrase"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Impossible de trouver un emplacement"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Paramètres du matériau"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "La connexion a échoué"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Comment le conflit du matériau doit-il être résolu ?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Paroi externe"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Visibilité des paramètres"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Parois internes"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mode"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Couche extérieure"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Paramètres visibles :"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Remplissage"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 sur %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Remplissage du support"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Le chargement d'un projet effacera tous les modèles sur le plateau."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Interface du support"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Ouvrir"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Support"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Plug-in de post-traitement"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Jupe"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Scripts de post-traitement"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Tour primaire"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Ajouter un script"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Déplacement"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Rétractions"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Autre"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Paramètres"
+msgid "Group #{group_nr}"
+msgstr "Groupe nº {group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Modifiez les scripts de post-traitement actifs."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "Les notes de version n'ont pas pu être ouvertes."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "Le script suivant est actif :"
-msgstr[1] "Les scripts suivants sont actifs :"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Passer"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Conversion de l'image..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Fermer"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "La distance maximale de chaque pixel à partir de la « Base »."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Ajouter"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Hauteur (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Fin"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "La hauteur de la base à partir du plateau en millimètres."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Annuler"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Suivant"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "La largeur en millimètres sur le plateau."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "La hauteur du volume d'impression a été réduite en raison de la valeur du paramètre « Séquence d'impression » afin d'éviter que le portique ne heurte les modèles imprimés."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Largeur (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Volume d'impression"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "La profondeur en millimètres sur le plateau"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "Impossible d'enregistrer l'archive du matériau dans {} :"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profondeur (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Échec de l'enregistrement de l'archive des matériaux"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Pour les lithophanies, les pixels foncés doivent correspondre à des emplacements plus épais afin d'empêcher la lumière de passer. Pour des cartes de hauteur, les pixels clairs signifient un terrain plus élevé, de sorte que les pixels clairs doivent correspondre à des emplacements plus épais dans le modèle 3D généré."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Erreur inconnue."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Le plus foncé est plus haut"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "Le fichier existe déjà"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Le plus clair est plus haut"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Le fichier <filename>{0}</filename> existe déjà. Êtes-vous sûr de vouloir le remplacer ?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Pour les lithophanes, un modèle logarithmique simple de la translucidité est disponible. Pour les cartes de hauteur, les valeurs des pixels correspondent aux hauteurs de façon linéaire."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "URL de fichier invalide :"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Linéaire"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Non pris en charge"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Translucidité"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Le pourcentage de lumière pénétrant une impression avec une épaisseur de 1 millimètre. La diminution de cette valeur augmente le contraste dans les régions sombres et diminue le contraste dans les régions claires de l'image."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Les paramètres ont été modifiés pour correspondre aux extrudeuses actuellement disponibles :"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmission 1 mm (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Paramètres mis à jour"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "La quantité de lissage à appliquer à l'image."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extrudeuse(s) désactivée(s)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Lissage"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : le plug-in du générateur a rapporté une erreur."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Sélectionnez les mises à niveau disponibles pour cet Ultimaker Original"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Profil exporté vers <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Plateau chauffant (kit officiel ou fabriqué soi-même)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "L'exportation a réussi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivellement du plateau"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> : {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Pour obtenir des résultats d'impression optimaux, vous pouvez maintenant régler votre plateau. Quand vous cliquez sur 'Aller à la position suivante', la buse se déplacera vers les différentes positions pouvant être réglées."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> avant l'ajout d'une imprimante."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Pour chacune des positions ; glissez un bout de papier sous la buse et ajustez la hauteur du plateau. La hauteur du plateau est juste lorsque la pointe de la buse gratte légèrement le papier."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Aucun profil personnalisé à importer dans le fichier <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Démarrer le nivellement du plateau"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Aller à la position suivante"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Le profil <filename>{0}</filename> contient des données incorrectes ; échec de l'importation."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Plus d'informations sur la collecte de données anonymes"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura recueille des données anonymes afin d'améliorer la qualité d'impression et l'expérience utilisateur. Voici un exemple de toutes les données partagées :"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "Importation du profil {0} réussie."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Je ne veux pas envoyer de données anonymes"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "Le fichier {0} ne contient pas de profil valide."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Autoriser l'envoi de données anonymes"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Le profil {0} est un type de fichier inconnu ou est corrompu."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marché en ligne"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Personnaliser le profil"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Vous devez redémarrer Cura pour que les changements apportés aux paquets ne prennent effet."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Il manque un type de qualité au profil."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Quitter %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Aucune imprimante n'est active pour le moment."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Installer"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "Impossible d'ajouter le profil."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Installé"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "Le type de qualité « {0} » n'est pas compatible avec la définition actuelle de la machine active « {1} »."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Avertissement : le profil n'est pas visible car son type de qualité « {0} » n'est pas disponible pour la configuration actuelle. Passez à une combinaison matériau/buse qui peut utiliser ce type de qualité."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Aller sur le Marché en ligne"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Multiplication et placement d'objets"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Rechercher des matériaux"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Placement des objets"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilité"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Placement de l'objet"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Machine"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Impossible de lancer une nouvelle procédure de connexion. Vérifiez si une autre tentative de connexion est toujours active."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Plateau"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Impossible d’atteindre le serveur du compte Ultimaker."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Support"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "Échec de la connexion"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualité"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Impossible de lire la réponse."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Fiche technique"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "L'état fourni n'est pas correct."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Fiche de sécurité"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Délai d'expiration lors de l'authentification avec le serveur de compte."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Directives d'impression"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Veuillez donner les permissions requises lors de l'autorisation de cette application."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Site Internet"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Une erreur s'est produite lors de la connexion, veuillez réessayer."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Connexion</a> nécessaire pour l'installation ou la mise à jour"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Échec du démarrage de Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Acheter des bobines de matériau</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Oups, un problème est survenu dans Ultimaker Cura.</p></b>\n"
+"                    <p>Une erreur irrécupérable est survenue lors du démarrage. Elle peut avoir été causée par des fichiers de configuration incorrects. Nous vous suggérons de sauvegarder et de réinitialiser votre configuration.</p>\n"
+"                    <p>Les sauvegardes se trouvent dans le dossier de configuration.</p>\n"
+"                    <p>Veuillez nous envoyer ce rapport d'incident pour que nous puissions résoudre le problème.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Mise à jour"
+msgid "Send crash report to Ultimaker"
+msgstr "Envoyer le rapport de d'incident à Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Mise à jour"
+msgid "Show detailed crash report"
+msgstr "Afficher le rapport d'incident détaillé"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Mis à jour"
+msgid "Show configuration folder"
+msgstr "Afficher le dossier de configuration"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Précédent"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plug-ins"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Matériaux"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Installé"
+msgid "Backup and Reset Configuration"
+msgstr "Sauvegarder et réinitialiser la configuration"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "S'installera au redémarrage"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Rapport d'incident"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Connexion</a> nécessaire pour effectuer la mise à jour"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Une erreur fatale est survenue dans Cura. Veuillez nous envoyer ce rapport d'incident pour résoudre le problème</p></b>\n"
+"            <p>Veuillez utiliser le bouton « Envoyer rapport » pour publier automatiquement un rapport d'erreur sur nos serveurs</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Revenir à une version précédente"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Informations système"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Désinstaller"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Inconnu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contributions de la communauté"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Version Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Plug-ins de la communauté"
+msgid "Cura language"
+msgstr "Langue de Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Matériaux génériques"
+msgid "OS language"
+msgstr "Langue du SE"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Récupération des paquets..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Plate-forme"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Site Internet"
+msgid "Qt version"
+msgstr "Version Qt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "PyQt version"
+msgstr "Version PyQt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Veuillez vous connecter pour obtenir les plug-ins et matériaux vérifiés pour Ultimaker Cura Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Version"
+msgid "Not yet initialized<br/>"
+msgstr "Pas encore initialisé<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Dernière mise à jour"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>Version OpenGL : {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marque"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>Revendeur OpenGL : {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Téléchargements"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>Moteur de rendu OpenGL : {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Plug-ins installés"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Retraçage de l'erreur"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Aucun plug-in n'a été installé."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Journaux"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Matériaux installés"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Envoyer rapport"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Aucun matériau n'a été installé."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Assurez-vous que votre imprimante est connectée :\n"
+"- Vérifiez si l'imprimante est sous tension.\n"
+"- Vérifiez si l'imprimante est connectée au réseau.- Vérifiez si vous êtes connecté pour découvrir les imprimantes connectées au cloud."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Plug-ins groupés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Veuillez connecter votre imprimante au réseau."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Matériaux groupés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Voir les manuels d'utilisation en ligne"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Impossible de se connecter à la base de données Cura Package. Veuillez vérifier votre connexion."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Pour surveiller votre impression depuis Cura, veuillez connecter l'imprimante."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Vous devez accepter la licence pour installer le package"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Sélectionner les paramètres pour personnaliser ce modèle"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Changements à partir de votre compte"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtrer..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Ignorer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Afficher tout"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Suivant"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Type de maille"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Les packages suivants seront ajoutés :"
+msgid "Normal model"
+msgstr "Modèle normal"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Les packages suivants ne peuvent pas être installés en raison d'une version incompatible de Cura :"
+msgid "Print as support"
+msgstr "Imprimer comme support"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Confirmer la désinstallation"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Modifier les paramètres de chevauchement"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Vous désinstallez des matériaux et/ou des profils qui sont encore en cours d'utilisation. La confirmation réinitialisera les matériaux / profils suivants à leurs valeurs par défaut."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "Ne prend pas en charge le chevauchement"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Matériaux"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Maille de remplissage uniquement"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profils"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Maille de coupe"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Confirmer"
+msgid "Select settings"
+msgstr "Sélectionner les paramètres"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Mettre à jour le firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Modèle de couleurs"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "Le firmware est le logiciel fonctionnant directement dans votre imprimante 3D. Ce firmware contrôle les moteurs pas à pas, régule la température et surtout, fait que votre machine fonctionne."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Couleur du matériau"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "Le firmware fourni avec les nouvelles imprimantes fonctionne, mais les nouvelles versions ont tendance à fournir davantage de fonctionnalités ainsi que des améliorations."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Type de ligne"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Mise à niveau automatique du firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Vitesse"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Charger le firmware personnalisé"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Épaisseur de la couche"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "Impossible de se connecter à l'imprimante ; échec de la mise à jour du firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Largeur de ligne"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "Échec de la mise à jour du firmware, car cette fonctionnalité n'est pas prise en charge par la connexion avec l'imprimante."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Débit"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Sélectionner le firmware personnalisé"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Mode de compatibilité"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Mise à jour du firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Déplacements"
+msgid "Updating firmware."
+msgstr "Mise à jour du firmware en cours."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Aides"
+msgid "Firmware update completed."
+msgstr "Mise à jour du firmware terminée."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Coque"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Échec de la mise à jour du firmware en raison d'une erreur inconnue."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Remplissage"
+msgid "Firmware update failed due to an communication error."
+msgstr "Échec de la mise à jour du firmware en raison d'une erreur de communication."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "Démarre"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Échec de la mise à jour du firmware en raison d'une erreur d'entrée/de sortie."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Afficher uniquement les couches supérieures"
+msgid "Firmware update failed due to missing firmware."
+msgstr "Échec de la mise à jour du firmware en raison du firmware manquant."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Afficher 5 niveaux détaillés en haut"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Abandonné"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Haut / bas"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Terminé"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Paroi interne"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Préparation..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Abandon..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "max"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Échec"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Mise en pause..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "En pause"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Reprise..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Action requise"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Finit %1 à %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Gérer l'imprimante"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Verre"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Veuillez mettre à jour le Firmware de votre imprimante pour gérer la file d'attente à distance."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Les flux de webcam des imprimantes cloud ne peuvent pas être visualisés depuis Ultimaker Cura. Cliquez sur « Gérer l'imprimante » pour visiter Ultimaker Digital Factory et voir cette webcam."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Chargement..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Indisponible"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Injoignable"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Inactif"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Préparation..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Impression"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Sans titre"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonyme"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Nécessite des modifications de configuration"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Détails"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Imprimante indisponible"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Premier disponible"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Mis en file d'attente"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gérer dans le navigateur"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Il n'y a pas de travaux d'impression dans la file d'attente. Découpez et envoyez une tache pour en ajouter une."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Tâches d'impression"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Temps total d'impression"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Attente de"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Imprimer sur le réseau"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Imprimer"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Sélection d'imprimantes"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Modifications de configuration"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Remplacer"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "L'imprimante assignée, %1, nécessite la modification de configuration suivante :"
 msgstr[1] "L'imprimante assignée, %1, nécessite les modifications de configuration suivantes :"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "L'imprimante %1 est assignée, mais le projet contient une configuration matérielle inconnue."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Changer le matériau %1 de %2 à %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "Charger %3 comme matériau %1 (Ceci ne peut pas être remplacé)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Changer le print core %1 de %2 à %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Changer le plateau en %1 (Ceci ne peut pas être remplacé)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Si vous sélectionnez « Remplacer », les paramètres de la configuration actuelle de l'imprimante seront utilisés. Cela peut entraîner l'échec de l'impression."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Aluminium"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Terminé"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Abandon..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Abandonné"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Échec"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Mise en pause..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "En pause"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Reprise..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Imprimer sur le réseau"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Action requise"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Imprimer"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Finit %1 à %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Sélection d'imprimantes"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Connecter à l'imprimante en réseau"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Pour imprimer directement sur votre imprimante via le réseau, assurez-vous que votre imprimante est connectée au réseau via un câble Ethernet ou en connectant votre imprimante à votre réseau Wi-Fi. Si vous ne connectez pas Cura avec votre imprimante, vous pouvez utiliser une clé USB pour transférer les fichiers g-code sur votre imprimante."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Sélectionnez votre imprimante dans la liste ci-dessous :"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Modifier"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Supprimer"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Rafraîchir"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Si votre imprimante n'apparaît pas dans la liste, lisez le <a href='%1'>guide de dépannage de l'impression en réseau</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Type"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Version du firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adresse"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Cette imprimante n'est pas configurée pour héberger un groupe d'imprimantes."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Cette imprimante est l'hôte d'un groupe d'imprimantes %1."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "L'imprimante à cette adresse n'a pas encore répondu."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Connecter"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Adresse IP non valide"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Veuillez saisir une adresse IP valide."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Adresse de l'imprimante"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Saisissez l'adresse IP de votre imprimante sur le réseau."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Imprimante indisponible"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "Premier disponible"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Déplacer l'impression en haut"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Effacer"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Reprendre"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Mise en pause..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Reprise..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pause"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Abandon..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Abandonner"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Êtes-vous sûr de vouloir déplacer %1 en haut de la file d'attente ?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Déplacer l'impression en haut de la file d'attente"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Êtes-vous sûr de vouloir supprimer %1 ?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Supprimer l'impression"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Êtes-vous sûr de vouloir annuler %1 ?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Abandonner l'impression"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "Mis en file d'attente"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gérer dans le navigateur"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Il n'y a pas de travaux d'impression dans la file d'attente. Découpez et envoyez une tache pour en ajouter une."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Tâches d'impression"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Temps total d'impression"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Attente de"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Modèle de couleurs"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Couleur du matériau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Type de ligne"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Vitesse"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Épaisseur de la couche"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Largeur de ligne"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Débit"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Mode de compatibilité"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Déplacements"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Aides"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Coque"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Remplissage"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "Démarre"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Afficher uniquement les couches supérieures"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Afficher 5 niveaux détaillés en haut"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Haut / bas"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Paroi interne"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "min"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "max"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Assurez-vous que votre imprimante est connectée :\n"
-"- Vérifiez si l'imprimante est sous tension.\n"
-"- Vérifiez si l'imprimante est connectée au réseau.- Vérifiez si vous êtes connecté pour découvrir les imprimantes connectées au cloud."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Veuillez connecter votre imprimante au réseau."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Hauteur (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Voir les manuels d'utilisation en ligne"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "La distance maximale de chaque pixel à partir de la « Base »."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Pour surveiller votre impression depuis Cura, veuillez connecter l'imprimante."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Certains éléments pourraient causer des problèmes à cette impression. Cliquez pour voir les conseils d'ajustement."
+msgid "The base height from the build plate in millimeters."
+msgstr "La hauteur de la base à partir du plateau en millimètres."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Largeur (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Vue 3D"
+msgid "The width in millimeters on the build plate"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profondeur (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Vue de face"
+msgid "The depth in millimeters on the build plate"
+msgstr "La profondeur en millimètres sur le plateau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Le plus foncé est plus haut"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Le plus clair est plus haut"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Vue du dessus"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Pour les lithophanies, les pixels foncés doivent correspondre à des emplacements plus épais afin d'empêcher la lumière de passer. Pour des cartes de hauteur, les pixels clairs signifient un terrain plus élevé, de sorte que les pixels clairs doivent correspondre à des emplacements plus épais dans le modèle 3D généré."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Linéaire"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Translucidité"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Vue gauche"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Pour les lithophanes, un modèle logarithmique simple de la translucidité est disponible. Pour les cartes de hauteur, les valeurs des pixels correspondent aux hauteurs de façon linéaire."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmission 1 mm (%)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Vue droite"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Le pourcentage de lumière pénétrant une impression avec une épaisseur de 1 millimètre. La diminution de cette valeur augmente le contraste dans les régions sombres et diminue le contraste dans les régions claires de l'image."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Liste d'objets"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Lissage"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "La quantité de lissage à appliquer à l'image."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marché en ligne"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Fichier"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Ouvrir un projet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Modifier"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Mettre à jour l'existant"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Visualisation"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Créer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Paramètres"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Résumé - Projet Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensions"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Comment le conflit de la machine doit-il être résolu ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&références"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Paramètres de l'imprimante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Aide"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Type"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nouveau projet"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Groupe d'imprimantes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Êtes-vous sûr(e) de souhaiter lancer un nouveau projet ? Cela supprimera les objets du plateau ainsi que tous paramètres non enregistrés."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Comment le conflit du profil doit-il être résolu ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Découpe en cours..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Paramètres de profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Impossible de découper"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nom"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Absent du profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 écrasent"
+msgstr[1] "%1 écrase"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Dérivé de"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 écrasent"
+msgstr[1] "%1, %2 écrase"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Comment le conflit du matériau doit-il être résolu ?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Paramètres du matériau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Visibilité des paramètres"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mode"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Paramètres visibles :"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 sur %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Le chargement d'un projet effacera tous les modèles sur le plateau."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Ouvrir"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Traitement"
+msgid "Want more?"
+msgstr "Vous en voulez plus ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Découper"
+msgid "Backup Now"
+msgstr "Sauvegarder maintenant"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Démarrer le processus de découpe"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Sauvegarde automatique"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Annuler"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Créez automatiquement une sauvegarde chaque jour où Cura est démarré."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Estimation de durée"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Version Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Estimation du matériau"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Machines"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Matériaux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profils"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Aucune estimation de la durée n'est disponible"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plug-ins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Aucune estimation des coûts n'est disponible"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Restaurer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Supprimer la sauvegarde"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Êtes-vous sûr de vouloir supprimer cette sauvegarde ? Il est impossible d'annuler cette action."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Restaurer la sauvegarde"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Vous devez redémarrer Cura avant que votre sauvegarde ne soit restaurée. Voulez-vous fermer Cura maintenant ?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Sauvegardez et synchronisez vos paramètres Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Aperçu"
+msgid "Sign in"
+msgstr "Se connecter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Ajouter une imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Mes sauvegardes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Vous n'avez actuellement aucune sauvegarde. Utilisez le bouton « Sauvegarder maintenant » pour en créer une."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Pendant la phase de prévisualisation, vous ne pourrez voir qu'un maximum de 5 sauvegardes. Supprimez une sauvegarde pour voir les plus anciennes."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Sauvegardes Cura"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Plus d'informations sur la collecte de données anonymes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura recueille des données anonymes afin d'améliorer la qualité d'impression et l'expérience utilisateur. Voici un exemple de toutes les données partagées :"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Je ne veux pas envoyer de données anonymes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Autoriser l'envoi de données anonymes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Plug-in de post-traitement"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Ajouter une imprimante en réseau"
+msgid "Post Processing Scripts"
+msgstr "Scripts de post-traitement"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Ajouter un script"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Ajouter une imprimante hors réseau"
+msgid "Settings"
+msgstr "Paramètres"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Modifiez les scripts de post-traitement actifs."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "Le script suivant est actif :"
+msgstr[1] "Les scripts suivants sont actifs :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Ajouter une imprimante cloud"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Sélectionnez les mises à niveau disponibles pour cet Ultimaker Original"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "En attente d'une réponse cloud"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Plateau chauffant (kit officiel ou fabriqué soi-même)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivellement du plateau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Aucune imprimante trouvée dans votre compte ?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Pour obtenir des résultats d'impression optimaux, vous pouvez maintenant régler votre plateau. Quand vous cliquez sur 'Aller à la position suivante', la buse se déplacera vers les différentes positions pouvant être réglées."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Les imprimantes suivantes de votre compte ont été ajoutées à Cura :"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Pour chacune des positions ; glissez un bout de papier sous la buse et ajustez la hauteur du plateau. La hauteur du plateau est juste lorsque la pointe de la buse gratte légèrement le papier."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Démarrer le nivellement du plateau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Aller à la position suivante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Ajouter l'imprimante manuellement"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Ajouter une imprimante par adresse IP"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Saisissez l'adresse IP de votre imprimante."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Ajouter"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Impossible de se connecter à l'appareil."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Quitter %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Impossible de vous connecter à votre imprimante Ultimaker ?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "L'imprimante à cette adresse n'a pas encore répondu."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Cette imprimante ne peut pas être ajoutée parce qu'il s'agit d'une imprimante inconnue ou de l'hôte d'un groupe."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Précédent"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Se connecter"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Accord utilisateur"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Décliner et fermer"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Bienvenue dans Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"Veuillez suivre ces étapes pour configurer\n"
-"Ultimaker Cura. Cela ne prendra que quelques instants."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Prise en main"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Connectez-vous à la plateforme Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Ajoutez des paramètres de matériaux et des plug-ins depuis la Marketplace"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Sauvegardez et synchronisez vos paramètres de matériaux et vos plug-ins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Partagez vos idées et obtenez l'aide de plus de 48 000 utilisateurs de la communauté Ultimaker"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Ignorer"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Refuser"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Créez gratuitement un compte Ultimaker"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Imprimante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Paramètres de la buse"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabricant"
+msgid "Nozzle size"
+msgstr "Taille de la buse"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Auteur du profil"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Nom de l'imprimante"
+msgid "Compatible material diameter"
+msgstr "Diamètre du matériau compatible"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Veuillez nommer votre imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Décalage buse X"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Aucune imprimante n'a été trouvée sur votre réseau."
+msgid "Nozzle offset Y"
+msgstr "Décalage buse Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Rafraîchir"
+msgid "Cooling Fan Number"
+msgstr "Numéro du ventilateur de refroidissement"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Extrudeuse G-Code de démarrage"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Extrudeuse G-Code de fin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Paramètres de l'imprimante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Ajouter une imprimante par IP"
+msgid "X (Width)"
+msgstr "X (Largeur)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Ajouter une imprimante cloud"
+msgid "Y (Depth)"
+msgstr "Y (Profondeur)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Dépannage"
+msgid "Z (Height)"
+msgstr "Z (Hauteur)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Aidez-nous à améliorer Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "Forme du plateau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura recueille des données anonymes pour améliorer la qualité d'impression et l'expérience utilisateur, notamment :"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Origine au centre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Types de machines"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Plateau chauffant"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Utilisation du matériau"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volume de fabrication chauffant"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Nombre de découpes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Parfum G-Code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Paramètres d'impression"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Paramètres de la tête d'impression"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Les données recueillies par Ultimaker Cura ne contiendront aucun renseignement personnel."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Plus d'informations"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "Nouveautés"
+msgid "X max"
+msgstr "X max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Vide"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Notes de version"
+msgid "Gantry Height"
+msgstr "Hauteur du portique"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Nombre d'extrudeuses"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Appliquer les décalages offset de l'extrudeuse au GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-Code de démarrage"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-Code de fin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "Mes imprimantes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Surveillez les imprimantes dans Ultimaker Digital Factory."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Créez des projets d'impression dans Digital Library."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Tâches d'impression"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Surveillez les tâches d'impression et réimprimez à partir de votre historique d'impression."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Étendez Ultimaker Cura avec des plug-ins et des profils de matériaux."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Devenez un expert de l'impression 3D avec les cours de formation en ligne Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Assistance ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Découvrez comment utiliser Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Posez une question"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Consultez la communauté Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Notifier un bug"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Informez les développeurs en cas de problème."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Visitez le site web Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Imprimer le modèle sélectionné avec %1"
+msgstr[1] "Imprimer les modèles sélectionnés avec %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Paramètres"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nouveau projet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Êtes-vous sûr(e) de souhaiter lancer un nouveau projet ? Cela supprimera les objets du plateau ainsi que tous paramètres non enregistrés."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marché en ligne"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Plateau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "Température cible du plateau chauffant. Le plateau sera chauffé ou refroidi pour tendre vers cette température. Si la valeur est 0, le chauffage du plateau sera éteint."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "Température actuelle du plateau chauffant."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "Température jusqu'à laquelle préchauffer le plateau."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Annuler"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Préchauffer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Préchauffez le plateau avant l'impression. Vous pouvez continuer à ajuster votre impression pendant qu'il chauffe, et vous n'aurez pas à attendre que le plateau chauffe lorsque vous serez prêt à lancer l'impression."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "L'imprimante n'est pas connectée."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Contrôle de l'imprimante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Position de coupe"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Distance de coupe"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Envoyer G-Code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Envoyer une commande G-Code personnalisée à l'imprimante connectée. Appuyez sur « Entrée » pour envoyer la commande."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Extrudeuse"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Température cible de l'extrémité chauffante. L'extrémité chauffante sera chauffée ou refroidie pour tendre vers cette température. Si la valeur est 0, le chauffage de l'extrémité chauffante sera coupé."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Température actuelle de cette extrémité chauffante."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "Température jusqu'à laquelle préchauffer l'extrémité chauffante."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Préchauffez l'extrémité chauffante avant l'impression. Vous pouvez continuer l'ajustement de votre impression pendant qu'elle chauffe, ce qui vous évitera un temps d'attente lorsque vous serez prêt à lancer l'impression."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Couleur du matériau dans cet extrudeur."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Matériau dans cet extrudeur."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "Buse insérée dans cet extrudeur."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Ouvrir un fichier de projet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Ceci est un fichier de projet Cura. Souhaitez-vous l'ouvrir comme projet ou en importer les modèles ?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Se souvenir de mon choix"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Ouvrir comme projet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importer les modèles"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Enregistrer le projet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Extrudeuse %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & matériau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Matériau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Ne pas afficher à nouveau le résumé du projet lors de l'enregistrement"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Enregistrer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Ouvrir le(s) fichier(s)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Nous avons trouvé au moins un fichier de projet parmi les fichiers que vous avez sélectionnés. Vous ne pouvez ouvrir qu'un seul fichier de projet à la fois. Nous vous conseillons de n'importer que les modèles de ces fichiers. Souhaitez-vous continuer ?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Importer tout comme modèles"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "À propos de %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "version : %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Solution complète pour l'impression 3D par dépôt de filament fondu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3763,2227 +3596,2385 @@ msgstr ""
 "Cura a été développé par Ultimaker B.V. en coopération avec la communauté Ultimaker.\n"
 "Cura est fier d'utiliser les projets open source suivants :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interface utilisateur graphique"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Cadre d'application"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Générateur G-Code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Bibliothèque de communication interprocess"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Langage de programmation"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Cadre IUG"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Liens cadre IUG"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Bibliothèque C/C++ Binding"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Format d'échange de données"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Prise en charge de la bibliothèque pour le calcul scientifique"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Prise en charge de la bibliothèque pour des maths plus rapides"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Prise en charge de la bibliothèque pour le traitement des fichiers STL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Prise en charge de la bibliothèque pour le traitement des objets planaires"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Prise en charge de la bibliothèque pour le traitement des mailles triangulaires"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Prise en charge de la bibliothèque pour le traitement des fichiers 3MF"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Prise en charge de la bibliothèque pour les métadonnées et le streaming de fichiers"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Bibliothèque de communication série"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Bibliothèque de découverte ZeroConf"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Bibliothèque de découpe polygone"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Vérificateur de type statique pour Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificats racines pour valider la fiabilité SSL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Bibliothèque de suivi des erreurs Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Bibliothèque d'emballage de polygones, développée par Prusa Research"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Liens en python pour libnest2d"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Bibliothèque de support pour l'accès au trousseau de clés du système"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Extensions Python pour Microsoft Windows"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Police"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Icônes SVG"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Déploiement d'applications sur multiples distributions Linux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Ouvrir le(s) fichier(s)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Nous avons trouvé au moins un fichier de projet parmi les fichiers que vous avez sélectionnés. Vous ne pouvez ouvrir qu'un seul fichier de projet à la fois. Nous vous conseillons de n'importer que les modèles de ces fichiers. Souhaitez-vous continuer ?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Importer tout comme modèles"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Enregistrer le projet"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Extrudeuse %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & matériau"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Matériau"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Ne pas afficher à nouveau le résumé du projet lors de l'enregistrement"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Enregistrer"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Annuler ou conserver les modifications"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"Vous avez personnalisé certains paramètres de profil.\n"
-"Souhaitez-vous conserver ces paramètres modifiés après avoir changé de profil ?\n"
-"Vous pouvez également annuler les modifications pour charger les valeurs par défaut de '%1'."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Paramètres du profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Modifications actuelles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Toujours me demander"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Annuler et ne plus me demander"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Conserver et ne plus me demander"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Annuler les modifications"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Conserver les modifications"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Ouvrir un fichier de projet"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "Aucun élément à sélectionner"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Ceci est un fichier de projet Cura. Souhaitez-vous l'ouvrir comme projet ou en importer les modèles ?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Ouvrir le(s) fichier(s)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Se souvenir de mon choix"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Ouvrir un fichier &récent"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Ouvrir comme projet"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Paramètres visibles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importer les modèles"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Réduire toutes les catégories"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gérer la visibilité des paramètres..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Matériau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Définir comme extrudeur actif"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Activer l'extrudeuse"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Désactiver l'extrudeuse"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Matériau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoris"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Générique"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Aide"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Fichier"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Enregistrer le projet..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "E&xporter..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Exporter la sélection..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&références"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Modifier"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "Im&primante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Imprimantes réseau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Imprimantes locales"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensions"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configurations"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Activer l'impression"
+msgid "Loading available configurations from the printer..."
+msgstr "Chargement des configurations disponibles à partir de l'imprimante..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Nom de la tâche"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Les configurations ne sont pas disponibles car l'imprimante est déconnectée."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Durée d'impression"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Cette configuration n'est pas disponible car %1 n'est pas reconnu. Veuillez visiter %2 pour télécharger le profil matériel correct."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Durée restante estimée"
+msgid "Marketplace"
+msgstr "Marché en ligne"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "L'imprimante cloud est hors ligne. Veuillez vérifier si l'imprimante est activée et connectée à Internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "La configuration de cet extrudeur n'est pas autorisée et interdit la découpe."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Cette imprimante n'est pas associée à votre compte. Veuillez visiter l'Ultimaker Digital Factory pour établir une connexion."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "Aucun profil ne correspond à la configuration de cet extrudeur."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "La connexion cloud est actuellement indisponible. Veuillez vous connecter pour connecter l'imprimante cloud."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Sélectionner la configuration"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "La connexion cloud est actuellement indisponible. Veuillez vérifier votre connexion Internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configurations"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Ajouter une imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personnalisé"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Gérer les imprimantes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Imprimante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Imprimantes connectées"
+msgid "Enabled"
+msgstr "Activé"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Imprimantes préréglées"
+msgid "Material"
+msgstr "Matériau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Paramètres d'impression"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Utiliser de la colle pour une meilleure adhérence avec cette combinaison de matériaux."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Configuration d'impression désactivée. Le fichier G-Code ne peut pas être modifié."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Imprimer le modèle sélectionné avec :"
+msgstr[1] "Imprimer les modèles sélectionnés avec :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Multiplier le modèle sélectionné"
+msgstr[1] "Multiplier les modèles sélectionnés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
+msgid "Number of Copies"
+msgstr "Nombre de copies"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Sauvegarder le projet..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Visualisation"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "Position de la &caméra"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Vue de la caméra"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspective"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Orthographique"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Type d'affichage"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Connectez-vous à la plateforme Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Certaines valeurs de paramètre / forçage sont différentes des valeurs enregistrées dans le profil. \n"
-"\n"
-"Cliquez pour ouvrir le gestionnaire de profils."
+"- Ajoutez des profils de matériaux et des plug-ins à partir de la Marketplace\n"
+"- Sauvegardez et synchronisez vos profils de matériaux et vos plug-ins\n"
+"- Partagez vos idées et obtenez l'aide de plus de 48 000 utilisateurs de la communauté Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Personnaliser les profils"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Créez gratuitement un compte Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Ignorer les modifications actuelles"
+msgid "Sign in"
+msgstr "Se connecter"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Dernière mise à jour : %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Recommandé"
+msgid "Ultimaker Account"
+msgstr "Compte Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Personnalisé"
+msgid "Sign Out"
+msgstr "Déconnexion"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Vérification en cours..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Compte synchronisé"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Un problème s'est produit..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Installer les mises à jour en attente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Rechercher des mises à jour de compte"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Découpe en cours..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Impossible de découper"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Traitement"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Découper"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Démarrer le processus de découpe"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Annuler"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Estimation de durée"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Estimation du matériau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Aucune estimation de la durée n'est disponible"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Aucune estimation des coûts n'est disponible"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Aperçu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Ce paquet sera installé après le redémarrage."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Général"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Paramètres"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Imprimantes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Matériaux"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profils"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Fermeture de %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Voulez-vous vraiment quitter %1 ?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Installer le paquet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Ouvrir le(s) fichier(s)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Nous avons trouvé au moins un fichier G-Code parmi les fichiers que vous avez sélectionné. Vous ne pouvez ouvrir qu'un seul fichier G-Code à la fois. Si vous souhaitez ouvrir un fichier G-Code, veuillez ne sélectionner qu'un seul fichier de ce type."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Ajouter une imprimante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Quoi de neuf"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "On"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Off"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Expérimental"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Paramètres d'impression"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Configuration d'impression désactivée. Le fichier G-Code ne peut pas être modifié."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Recommandé"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personnalisé"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "Il n'y a pas de profil %1 pour la configuration dans l'extrudeur %2. L'intention par défaut sera utilisée à la place"
 msgstr[1] "Il n'y a pas de profil %1 pour les configurations dans les extrudeurs %2. L'intention par défaut sera utilisée à la place"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profils"
+msgid "Gradual infill"
+msgstr "Remplissage graduel"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Vous avez modifié certains paramètres du profil. Si vous souhaitez les modifier, allez dans le mode Personnaliser."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Un remplissage graduel augmentera la quantité de remplissage vers le haut."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Support"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Générer des structures pour soutenir les parties du modèle qui possèdent des porte-à-faux. Sans ces structures, ces parties s'effondreront durant l'impression."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Remplissage graduel"
+msgid "Profiles"
+msgstr "Profils"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Un remplissage graduel augmentera la quantité de remplissage vers le haut."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Vous avez modifié certains paramètres du profil. Si vous souhaitez les modifier, allez dans le mode Personnaliser."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Adhérence"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Activez l'impression d'une bordure ou plaquette (Brim/Raft). Cela ajoutera une zone plate autour de ou sous votre objet qui est facile à découper par la suite."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Sauvegarder le projet..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Personnaliser les profils"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Imprimantes réseau"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Ignorer les modifications actuelles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Imprimantes locales"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Matériau"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Certaines valeurs de paramètre / forçage sont différentes des valeurs enregistrées dans le profil. \n"
+"\n"
+"Cliquez pour ouvrir le gestionnaire de profils."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoris"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Paramètre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Générique"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Imprimer le modèle sélectionné avec :"
-msgstr[1] "Imprimer les modèles sélectionnés avec :"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Actuel"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplier le modèle sélectionné"
-msgstr[1] "Multiplier les modèles sélectionnés"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Nombre de copies"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Enregistrer le projet..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "E&xporter..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Exporter la sélection..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Visibilité des paramètres"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configurations"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personnalisé"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Vérifier tout"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Activer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Renommer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Confirmer le changement de diamètre"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Le nouveau diamètre de filament est réglé sur %1 mm, ce qui n'est pas compatible avec l'extrudeuse actuelle. Souhaitez-vous poursuivre ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Imprimante"
+msgid "Display Name"
+msgstr "Afficher le nom"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Activé"
+msgid "Brand"
+msgstr "Marque"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Matériau"
+msgid "Material Type"
+msgstr "Type de matériau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Utiliser de la colle pour une meilleure adhérence avec cette combinaison de matériaux."
+msgid "Color"
+msgstr "Couleur"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "La configuration de cet extrudeur n'est pas autorisée et interdit la découpe."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "Aucun profil ne correspond à la configuration de cet extrudeur."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Propriétés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Sélectionner la configuration"
+msgid "Density"
+msgstr "Densité"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configurations"
+msgid "Diameter"
+msgstr "Diamètre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Chargement des configurations disponibles à partir de l'imprimante..."
+msgid "Filament Cost"
+msgstr "Coût du filament"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Les configurations ne sont pas disponibles car l'imprimante est déconnectée."
+msgid "Filament weight"
+msgstr "Poids du filament"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Cette configuration n'est pas disponible car %1 n'est pas reconnu. Veuillez visiter %2 pour télécharger le profil matériel correct."
+msgid "Filament length"
+msgstr "Longueur du filament"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marché en ligne"
+msgid "Cost per Meter"
+msgstr "Coût au mètre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Ouvrir le(s) fichier(s)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Ce matériau est lié à %1 et partage certaines de ses propriétés."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "Im&primante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Délier le matériau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Matériau"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Description"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Définir comme extrudeur actif"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informations d'adhérence"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Activer l'extrudeuse"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Informations"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Désactiver l'extrudeuse"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Synchroniser les matériaux avec les imprimantes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Ouvrir un fichier &récent"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Synchroniser les matériaux avec les imprimantes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Paramètres visibles"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "En suivant quelques étapes simples, vous serez en mesure de synchroniser tous vos profils de matériaux avec vos imprimantes."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Réduire toutes les catégories"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "Pourquoi dois-je synchroniser les profils de matériaux ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gérer la visibilité des paramètres..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Démarrer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "Position de la &caméra"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Se connecter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Vue de la caméra"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Pour synchroniser automatiquement les profils de matériaux avec toutes vos imprimantes connectées à Digital Factory, vous devez être connecté à Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspective"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Synchroniser les matériaux avec USB"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Orthographique"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "Les imprimantes suivantes recevront les nouveaux profils de matériaux :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Plateau"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "Un problème est survenu lors de l'envoi des matériaux aux imprimantes."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Type d'affichage"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "Les profils de matériaux ont été synchronisés avec les imprimantes suivantes :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Est imprimé comme support."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Dépannage"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "D'autres modèles qui se chevauchent avec ce modèle ont été modifiés."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "Imprimantes manquantes ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Le chevauchement de remplissage avec ce modèle a été modifié."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Assurez-vous que toutes vos imprimantes sont allumées et connectées à Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Les chevauchements avec ce modèle ne sont pas pris en charge."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Actualiser la liste"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Remplace le paramètre %1."
-msgstr[1] "Remplace les paramètres %1."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Réessayer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profils"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Terminé"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Activer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Synchroniser"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Créer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "Synchronisation"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "Aucune imprimante trouvée"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Il semble que vous n'ayez aucune imprimante compatible connectée à Digital Factory. Assurez-vous que votre imprimante est connectée et qu'elle utilise le dernier micrologiciel."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Découvrez comment connecter votre imprimante à Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Rafraîchir"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Synchroniser les profils de matériaux via USB"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Suivez les étapes suivantes pour charger les nouveaux profils de matériaux dans votre imprimante."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Cliquez sur le bouton d'exportation des archives de matériaux."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "Enregistrez le fichier .umm sur une clé USB."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "Insérez la clé USB dans votre imprimante et lancez la procédure pour charger de nouveaux profils de matériaux."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Comment charger de nouveaux profils de matériaux dans mon imprimante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Précédent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Exporter l'archive des matériaux"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Exporter tous les matériaux"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Dupliquer"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Renommer"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Importer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Exporter"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Créer un profil"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Veuillez fournir un nom pour ce profil."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Dupliquer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Dupliquer un profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exporter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Confirmer la suppression"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Êtes-vous sûr de vouloir supprimer l'objet %1 ? Vous ne pourrez pas revenir en arrière !"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Renommer le profil"
+msgid "Import Material"
+msgstr "Importer un matériau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importer un profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Matériau <filename>%1</filename> importé avec succès"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Impossible d'importer le matériau <filename>%1</filename> : <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exporter un profil"
+msgid "Export Material"
+msgstr "Exporter un matériau"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Échec de l'exportation de matériau vers <filename>%1</filename> : <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Matériau exporté avec succès vers <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Imprimante : %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Mettre à jour le profil à l'aide des paramètres / forçages actuels"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Ce profil utilise les paramètres par défaut spécifiés par l'imprimante, de sorte qu'aucun paramètre / forçage n'apparaît dans la liste ci-dessous."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Vos paramètres actuels correspondent au profil sélectionné."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Paramètres généraux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Général"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Créer un profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Veuillez fournir un nom pour ce profil."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exporter un profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Dupliquer un profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Renommer le profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importer un profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Devise :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Thème :"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Vous devez redémarrer l'application pour que ces changements prennent effet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Découper automatiquement si les paramètres sont modifiés."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Découper automatiquement"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportement Viewport"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Surligne les parties non supportées du modèle en rouge. Sans ajouter de support, ces zones ne s'imprimeront pas correctement."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Mettre en surbrillance les porte-à-faux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Surlignez les surfaces du modèle manquantes ou étrangères en utilisant les signes d'avertissement. Les Toolpaths seront souvent les parties manquantes de la géométrie prévue."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Afficher les erreurs du modèle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Déplace la caméra afin que le modèle sélectionné se trouve au centre de la vue"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centrer la caméra lorsqu'un élément est sélectionné"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Le comportement de zoom par défaut de Cura doit-il être inversé ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverser la direction du zoom de la caméra."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Le zoom doit-il se faire dans la direction de la souris ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Le zoom vers la souris n'est pas pris en charge dans la perspective orthographique."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomer vers la direction de la souris"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Les modèles dans la zone d'impression doivent-ils être déplacés afin de ne plus se croiser ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Veillez à ce que les modèles restent séparés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Les modèles dans la zone d'impression doivent-ils être abaissés afin de toucher le plateau ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Abaisser automatiquement les modèles sur le plateau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Afficher le message d'avertissement dans le lecteur G-Code."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Message d'avertissement dans le lecteur G-Code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "La couche doit-elle être forcée en mode de compatibilité ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forcer l'affichage de la couche en mode de compatibilité (redémarrage requis)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Est-ce que Cura devrait ouvrir à l'endroit où il a été fermé ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurer la position de la fenêtre au démarrage"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Quel type de rendu de la caméra doit-il être utilisé?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Rendu caméra :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Perspective"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Orthographique"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Ouvrir et enregistrer des fichiers"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "L'ouverture de fichiers à partir du bureau ou d'applications externes doit-elle se faire dans la même instance de Cura ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Utiliser une seule instance de Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "Les objets doivent-ils être supprimés du plateau de fabrication avant de charger un nouveau modèle dans l'instance unique de Cura ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Supprimez les objets du plateau de fabrication avant de charger un modèle dans l'instance unique"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Les modèles doivent-ils être mis à l'échelle du volume d'impression s'ils sont trop grands ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Réduire la taille des modèles trop grands"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Un modèle peut apparaître en tout petit si son unité est par exemple en mètres plutôt qu'en millimètres. Ces modèles doivent-ils être agrandis ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Mettre à l'échelle les modèles extrêmement petits"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Les modèles doivent-ils être sélectionnés après leur chargement ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Sélectionner les modèles lorsqu'ils sont chargés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Un préfixe basé sur le nom de l'imprimante doit-il être automatiquement ajouté au nom de la tâche d'impression ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Ajouter le préfixe de la machine au nom de la tâche"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Un résumé doit-il être affiché lors de l'enregistrement d'un fichier de projet ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Afficher la boîte de dialogue du résumé lors de l'enregistrement du projet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportement par défaut lors de l'ouverture d'un fichier de projet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportement par défaut lors de l'ouverture d'un fichier de projet : "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Toujours me demander"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Toujours ouvrir comme projet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Toujours importer les modèles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Lorsque vous apportez des modifications à un profil puis passez à un autre profil, une boîte de dialogue apparaît, vous demandant si vous souhaitez conserver les modifications. Vous pouvez aussi choisir une option par défaut, et le dialogue ne s'affichera plus."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportement par défaut pour les valeurs de paramètres modifiées lors du passage à un profil différent : "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Toujours rejeter les paramètres modifiés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Toujours transférer les paramètres modifiés dans le nouveau profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Confidentialité"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Les données anonymes de votre impression doivent-elles être envoyées à Ultimaker ? Notez qu'aucun modèle, aucune adresse IP ni aucune autre information permettant de vous identifier personnellement ne seront envoyés ou stockés."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Envoyer des informations (anonymes) sur l'impression"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Plus d'informations"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Mises à jour"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura doit-il vérifier les mises à jour au démarrage du programme ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Vérifier les mises à jour au démarrage"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "Lorsque vous vérifiez les mises à jour, ne vérifiez que les versions stables."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Uniquement les versions stables"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "Lorsque vous recherchez des mises à jour, vérifiez à la fois les versions stables et les versions bêta."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "Versions stables et bêta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Une vérification automatique des nouveaux plugins doit-elle être effectuée à chaque fois que Cura est lancé ? Il est fortement recommandé de ne pas désactiver cette fonction !"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Recevoir des notifications pour les mises à jour des plugins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informations"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Ajouter une imprimante par adresse IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Confirmer le changement de diamètre"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Saisissez l'adresse IP de votre imprimante."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Le nouveau diamètre de filament est réglé sur %1 mm, ce qui n'est pas compatible avec l'extrudeuse actuelle. Souhaitez-vous poursuivre ?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Ajouter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Afficher le nom"
+msgid "Could not connect to device."
+msgstr "Impossible de se connecter à l'appareil."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Type de matériau"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Impossible de vous connecter à votre imprimante Ultimaker ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Couleur"
+msgid "The printer at this address has not responded yet."
+msgstr "L'imprimante à cette adresse n'a pas encore répondu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Propriétés"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Cette imprimante ne peut pas être ajoutée parce qu'il s'agit d'une imprimante inconnue ou de l'hôte d'un groupe."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densité"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Se connecter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Diamètre"
+msgid "Release Notes"
+msgstr "Notes de version"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Coût du filament"
+msgid "User Agreement"
+msgstr "Accord utilisateur"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Poids du filament"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Accepter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Longueur du filament"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Décliner et fermer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Coût au mètre"
+msgid "What's New"
+msgstr "Nouveautés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Suivant"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Ce matériau est lié à %1 et partage certaines de ses propriétés."
+msgid "Add a Cloud printer"
+msgstr "Ajouter une imprimante cloud"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Délier le matériau"
+msgid "Waiting for Cloud response"
+msgstr "En attente d'une réponse cloud"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Description"
+msgid "No printers found in your account?"
+msgstr "Aucune imprimante trouvée dans votre compte ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informations d'adhérence"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Les imprimantes suivantes de votre compte ont été ajoutées à Cura :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Créer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Ajouter l'imprimante manuellement"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Dupliquer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Ajoutez des paramètres de matériaux et des plug-ins depuis la Marketplace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Synchroniser les imprimantes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Sauvegardez et synchronisez vos paramètres de matériaux et vos plug-ins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Partagez vos idées et obtenez l'aide de plus de 48 000 utilisateurs de la communauté Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importer un matériau"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Ignorer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Impossible d'importer le matériau <filename>%1</filename> : <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Créez gratuitement un compte Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Matériau <filename>%1</filename> importé avec succès"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Bienvenue dans Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exporter un matériau"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"Veuillez suivre ces étapes pour configurer\n"
+"Ultimaker Cura. Cela ne prendra que quelques instants."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Échec de l'exportation de matériau vers <filename>%1</filename> : <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Prise en main"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Matériau exporté avec succès vers <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vide"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Synchroniser les matériaux avec les imprimantes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricant"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Synchroniser les matériaux avec les imprimantes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Auteur du profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "En suivant quelques étapes simples, vous serez en mesure de synchroniser tous vos profils de matériaux avec vos imprimantes."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nom de l'imprimante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Démarrer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Veuillez nommer votre imprimante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "Pourquoi dois-je synchroniser les profils de matériaux ?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Ajouter une imprimante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Se connecter"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Ajouter une imprimante en réseau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Pour synchroniser automatiquement les profils de matériaux avec toutes vos imprimantes connectées à Digital Factory, vous devez être connecté à Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Ajouter une imprimante hors réseau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Synchroniser les matériaux avec USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Aucune imprimante n'a été trouvée sur votre réseau."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "Les imprimantes suivantes recevront les nouveaux profils de matériaux :"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Rafraîchir"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "Un problème est survenu lors de l'envoi des matériaux aux imprimantes."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Ajouter une imprimante par IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "Les profils de matériaux ont été synchronisés avec les imprimantes suivantes :"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Ajouter une imprimante cloud"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Dépannage"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "Imprimantes manquantes ?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Aidez-nous à améliorer Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Assurez-vous que toutes vos imprimantes sont allumées et connectées à Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Actualiser la liste"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Réessayer"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Terminé"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura recueille des données anonymes pour améliorer la qualité d'impression et l'expérience utilisateur, notamment :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Synchroniser"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Types de machines"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "Synchronisation"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Utilisation du matériau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "Aucune imprimante trouvée"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Nombre de découpes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Il semble que vous n'ayez aucune imprimante compatible connectée à Digital Factory. Assurez-vous que votre imprimante est connectée et qu'elle utilise"
-" le dernier micrologiciel."
+msgid "Print settings"
+msgstr "Paramètres d'impression"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Découvrez comment connecter votre imprimante à Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Les données recueillies par Ultimaker Cura ne contiendront aucun renseignement personnel."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Rafraîchir"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Plus d'informations"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Synchroniser les profils de matériaux via USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Liste d'objets"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Suivez les étapes suivantes pour charger les nouveaux profils de matériaux dans votre imprimante."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "Est imprimé comme support."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Cliquez sur le bouton d'exportation des archives de matériaux."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "D'autres modèles qui se chevauchent avec ce modèle ont été modifiés."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "Enregistrez le fichier .umm sur une clé USB."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "Le chevauchement de remplissage avec ce modèle a été modifié."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "Insérez la clé USB dans votre imprimante et lancez la procédure pour charger de nouveaux profils de matériaux."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "Les chevauchements avec ce modèle ne sont pas pris en charge."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Comment charger de nouveaux profils de matériaux dans mon imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Remplace le paramètre %1."
+msgstr[1] "Remplace les paramètres %1."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Exporter l'archive des matériaux"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Imprimantes connectées"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Exporter tous les matériaux"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Imprimantes préréglées"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Visibilité des paramètres"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "L'imprimante cloud est hors ligne. Veuillez vérifier si l'imprimante est activée et connectée à Internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Vérifier tout"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Cette imprimante n'est pas associée à votre compte. Veuillez visiter l'Ultimaker Digital Factory pour établir une connexion."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Imprimantes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "La connexion cloud est actuellement indisponible. Veuillez vous connecter pour connecter l'imprimante cloud."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calculer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "La connexion cloud est actuellement indisponible. Veuillez vérifier votre connexion Internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Paramètre"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Ajouter une imprimante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Gérer les imprimantes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Actuel"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unité"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Sans titre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Non connecté à une imprimante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "L'imprimante n'accepte pas les commandes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "En maintenance. Vérifiez l'imprimante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Connexion avec l'imprimante perdue"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Impression..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "En pause"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Préparation..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Supprimez l'imprimante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Abandonner l'impression"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Êtes-vous sûr(e) de vouloir abandonner l'impression ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Imprimer le modèle sélectionné avec %1"
-msgstr[1] "Imprimer les modèles sélectionnés avec %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "Mes imprimantes"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Surveillez les imprimantes dans Ultimaker Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Créez des projets d'impression dans Digital Library."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Tâches d'impression"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Surveillez les tâches d'impression et réimprimez à partir de votre historique d'impression."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Étendez Ultimaker Cura avec des plug-ins et des profils de matériaux."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Devenez un expert de l'impression 3D avec les cours de formation en ligne Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Assistance ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Certains paramètres masqués utilisent des valeurs différentes de leur valeur normalement calculée.\n"
+"\n"
+"Cliquez pour rendre ces paramètres visibles."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Découvrez comment utiliser Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Paramètres de recherche"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Posez une question"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copier la valeur vers tous les extrudeurs"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Consultez la communauté Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copier toutes les valeurs modifiées vers toutes les extrudeuses"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Notifier un bug"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Masquer ce paramètre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Informez les développeurs en cas de problème."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Masquer ce paramètre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Visitez le site web Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Afficher ce paramètre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Contrôle de l'imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configurer la visibilité des paramètres..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Position de coupe"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Ce paramètre n'est pas utilisé car tous les paramètres qu'il influence sont remplacés."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Touche"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Touché par"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Distance de coupe"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Ce paramètre est toujours partagé par toutes les extrudeuses. Le modifier ici entraînera la modification de la valeur pour toutes les extrudeuses."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Envoyer G-Code"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Envoyer une commande G-Code personnalisée à l'imprimante connectée. Appuyez sur « Entrée » pour envoyer la commande."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Ce paramètre est résolu à partir de valeurs conflictuelles spécifiques à l'extrudeur :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Extrudeuse"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Température cible de l'extrémité chauffante. L'extrémité chauffante sera chauffée ou refroidie pour tendre vers cette température. Si la valeur est 0, le chauffage de l'extrémité chauffante sera coupé."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Température actuelle de cette extrémité chauffante."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "Température jusqu'à laquelle préchauffer l'extrémité chauffante."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Annuler"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Préchauffer"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Préchauffez l'extrémité chauffante avant l'impression. Vous pouvez continuer l'ajustement de votre impression pendant qu'elle chauffe, ce qui vous évitera un temps d'attente lorsque vous serez prêt à lancer l'impression."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Couleur du matériau dans cet extrudeur."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Matériau dans cet extrudeur."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "Buse insérée dans cet extrudeur."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "L'imprimante n'est pas connectée."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Ce paramètre possède une valeur qui est différente du profil.\n"
+"\n"
+"Cliquez pour restaurer la valeur du profil."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Plateau"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "Température cible du plateau chauffant. Le plateau sera chauffé ou refroidi pour tendre vers cette température. Si la valeur est 0, le chauffage du plateau sera éteint."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "Température actuelle du plateau chauffant."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "Température jusqu'à laquelle préchauffer le plateau."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Préchauffez le plateau avant l'impression. Vous pouvez continuer à ajuster votre impression pendant qu'il chauffe, et vous n'aurez pas à attendre que le plateau chauffe lorsque vous serez prêt à lancer l'impression."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Se connecter"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Ajoutez des profils de matériaux et des plug-ins à partir de la Marketplace\n"
-"- Sauvegardez et synchronisez vos profils de matériaux et vos plug-ins\n"
-"- Partagez vos idées et obtenez l'aide de plus de 48 000 utilisateurs de la communauté Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Créez gratuitement un compte Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Dernière mise à jour : %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Compte Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Déconnexion"
+"Ce paramètre est normalement calculé mais il possède actuellement une valeur absolue définie.\n"
+"\n"
+"Cliquez pour restaurer la valeur calculée."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Vérification en cours..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Compte synchronisé"
+msgid "Active print"
+msgstr "Activer l'impression"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Un problème s'est produit..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Installer les mises à jour en attente"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Rechercher des mises à jour de compte"
+msgid "Job Name"
+msgstr "Nom de la tâche"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Sans titre"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Durée d'impression"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "Aucun élément à sélectionner"
+msgid "Estimated time left"
+msgstr "Durée restante estimée"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Afficher le guide de dépannage en ligne"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Passer en Plein écran"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Quitter le mode plein écran"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Annuler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Rétablir"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Quitter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "Vue 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Vue de face"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Vue du dessus"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Vue de dessous"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Vue latérale gauche"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Vue latérale droite"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Configurer Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Ajouter une imprimante..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Gérer les &imprimantes..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Gérer les matériaux..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Ajouter d'autres matériaux du Marketplace"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Mettre à jour le profil à l'aide des paramètres / forçages actuels"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Ignorer les modifications actuelles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&Créer un profil à partir des paramètres / forçages actuels..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Gérer les profils..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Afficher la &documentation en ligne"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Notifier un &bug"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Quoi de neuf"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "À propos de..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Supprimer la sélection"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Centrer la sélection"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Multiplier la sélection"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Supprimer le modèle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Ce&ntrer le modèle sur le plateau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "&Grouper les modèles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Dégrouper les modèles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "&Fusionner les modèles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Multiplier le modèle..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Sélectionner tous les modèles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Supprimer les objets du plateau"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Recharger tous les modèles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Réorganiser tous les modèles sur tous les plateaux"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Réorganiser tous les modèles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Réorganiser la sélection"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Réinitialiser toutes les positions des modèles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Réinitialiser tous les modèles et transformations"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Ouvrir le(s) fichier(s)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Nouveau projet..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Afficher le dossier de configuration"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configurer la visibilité des paramètres..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marché en ligne"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Ce paramètre n'est pas utilisé car tous les paramètres qu'il influence sont remplacés."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Touche"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Touché par"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Ce paramètre est toujours partagé par toutes les extrudeuses. Le modifier ici entraînera la modification de la valeur pour toutes les extrudeuses."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Ce paramètre est résolu à partir de valeurs conflictuelles spécifiques à l'extrudeur :"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Ce paramètre possède une valeur qui est différente du profil.\n"
-"\n"
-"Cliquez pour restaurer la valeur du profil."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Ce paramètre est normalement calculé mais il possède actuellement une valeur absolue définie.\n"
-"\n"
-"Cliquez pour restaurer la valeur calculée."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Paramètres de recherche"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copier la valeur vers tous les extrudeurs"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copier toutes les valeurs modifiées vers toutes les extrudeuses"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Masquer ce paramètre"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Masquer ce paramètre"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Afficher ce paramètre"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Certains paramètres masqués utilisent des valeurs différentes de leur valeur normalement calculée.\n"
-"\n"
-"Cliquez pour rendre ces paramètres visibles."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Ce paquet sera installé après le redémarrage."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Paramètres"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Fermeture de %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Voulez-vous vraiment quitter %1 ?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Installer le paquet"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Vue 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Ouvrir le(s) fichier(s)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Vue de face"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Nous avons trouvé au moins un fichier G-Code parmi les fichiers que vous avez sélectionné. Vous ne pouvez ouvrir qu'un seul fichier G-Code à la fois. Si vous souhaitez ouvrir un fichier G-Code, veuillez ne sélectionner qu'un seul fichier de ce type."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Vue du dessus"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Ajouter une imprimante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Vue gauche"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Quoi de neuf"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Vue droite"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Fournit les paramètres par modèle."
+msgid "Provides a prepare stage in Cura."
+msgstr "Fournit une étape de préparation dans Cura."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Outil de paramètres par modèle"
+msgid "Prepare Stage"
+msgstr "Étape de préparation"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Fournit la prise en charge de l'importation de profils Cura."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Fournit la prise en charge de l'exportation de profils Cura."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Lecteur de profil Cura"
+msgid "Cura Profile Writer"
+msgstr "Générateur de profil Cura"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Fournit la prise en charge de la lecture de fichiers X3D."
+msgid "Provides support for reading model files."
+msgstr "Fournit la prise en charge de la lecture de fichiers modèle 3D."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "Lecteur X3D"
+msgid "Trimesh Reader"
+msgstr "Lecteur de Trimesh"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Sauvegardez et restaurez votre configuration."
+msgid "Checks for firmware updates."
+msgstr "Vérifie les mises à jour du firmware."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Sauvegardes Cura"
+msgid "Firmware Update Checker"
+msgstr "Vérificateur des mises à jour du firmware"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Permet de modifier les paramètres de la machine (tels que volume d'impression, taille de buse, etc.)"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Enregistre certains événements afin qu'ils puissent être utilisés par le rapporteur d'incident"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Action Paramètres de la machine"
+msgid "Sentry Logger"
+msgstr "Journal d'événements dans Sentry"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Crée un maillage effaceur pour bloquer l'impression du support en certains endroits"
+msgid "Provides a monitor stage in Cura."
+msgstr "Fournit une étape de surveillance dans Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Effaceur de support"
+msgid "Monitor Stage"
+msgstr "Étape de surveillance"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5995,105 +5986,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Plugin de périphérique de sortie sur disque amovible"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Fournit à une machine des actions permettant la mise à jour du firmware."
+msgid "Provides support for reading AMF files."
+msgstr "Fournit la prise en charge de la lecture de fichiers AMF."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Programme de mise à jour du firmware"
+msgid "AMF Reader"
+msgstr "Lecteur AMF"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Fournit la prise en charge de l'importation de profils à partir de versions Cura antérieures."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Fournit un support pour la lecture des paquets de format Ultimaker."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lecteur de profil Cura antérieur"
+msgid "UFP Reader"
+msgstr "Lecteur UFP"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Fournit la prise en charge de la lecture de fichiers 3MF."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Se connecte à la Digital Library, permettant à Cura d'ouvrir des fichiers à partir de cette dernière et d'y enregistrer des fichiers."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Lecteur 3MF"
+msgid "Ultimaker Digital Library"
+msgstr "Ultimaker Digital Library"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Permet l'écriture de fichiers Ultimaker Format Package."
+msgid "Provides the Per Model Settings."
+msgstr "Fournit les paramètres par modèle."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "Générateur UFP"
+msgid "Per Model Settings Tool"
+msgstr "Outil de paramètres par modèle"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Enregistre certains événements afin qu'ils puissent être utilisés par le rapporteur d'incident"
+msgid "Provides a machine actions for updating firmware."
+msgstr "Fournit à une machine des actions permettant la mise à jour du firmware."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Journal d'événements dans Sentry"
+msgid "Firmware Updater"
+msgstr "Programme de mise à jour du firmware"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Fournit la prise en charge de l'importation de profils à partir de fichiers g-code."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Gère les connexions réseau vers les imprimantes Ultimaker en réseau."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Lecteur de profil G-Code"
+msgid "Ultimaker Network Connection"
+msgstr "Connexion réseau Ultimaker"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Fournit une étape de prévisualisation dans Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Vérifie les modèles et la configuration de l'impression pour déceler d'éventuels problèmes d'impression et donne des suggestions."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Étape de prévisualisation"
+msgid "Model Checker"
+msgstr "Contrôleur de modèle"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Permet la vue Rayon-X."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Vue Rayon-X"
+msgid "Simulation View"
+msgstr "Vue simulation"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Fournit le lien vers l'arrière du système de découpage CuraEngine."
+msgid "Writes g-code to a file."
+msgstr "Enregistre le G-Code dans un fichier."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Système CuraEngine"
+msgid "G-code Writer"
+msgstr "Générateur de G-Code"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Fournit la prise en charge de la lecture de fichiers AMF."
+msgid "Provides support for writing 3MF files."
+msgstr "Permet l'écriture de fichiers 3MF."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Lecteur AMF"
+msgid "3MF Writer"
+msgstr "Générateur 3MF"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6105,175 +6096,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Lecteur G-Code compressé"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Extension qui permet le post-traitement des scripts créés par l'utilisateur"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Offre la possibilité de lire et d'écrire des profils matériels basés sur XML."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Post-traitement"
+msgid "Material Profiles"
+msgstr "Profils matériels"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Fournit la prise en charge de l'exportation de profils Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Fournit le lien vers l'arrière du système de découpage CuraEngine."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Générateur de profil Cura"
+msgid "CuraEngine Backend"
+msgstr "Système CuraEngine"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Accepte les G-Code et les envoie à une imprimante. Ce plugin peut aussi mettre à jour le firmware."
+msgid "Provides support for reading X3D files."
+msgstr "Fournit la prise en charge de la lecture de fichiers X3D."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Impression par USB"
+msgid "X3D Reader"
+msgstr "Lecteur X3D"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Fournit une étape de préparation dans Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Permet de générer une géométrie imprimable à partir de fichiers d'image 2D."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Étape de préparation"
+msgid "Image Reader"
+msgstr "Lecteur d'images"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Permet le chargement et l'affichage de fichiers G-Code."
+msgid "Provides support for reading 3MF files."
+msgstr "Fournit la prise en charge de la lecture de fichiers 3MF."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Lecteur G-Code"
+msgid "3MF Reader"
+msgstr "Lecteur 3MF"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Permet de générer une géométrie imprimable à partir de fichiers d'image 2D."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Permet l'écriture de fichiers Ultimaker Format Package."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Lecteur d'images"
+msgid "UFP Writer"
+msgstr "Générateur UFP"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Fournit les actions de la machine pour les machines Ultimaker (telles que l'assistant de calibration du plateau, sélection des mises à niveau, etc.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Fournit la prise en charge de l'importation de profils à partir de versions Cura antérieures."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Actions de la machine Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lecteur de profil Cura antérieur"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Enregistre le G-Code dans une archive compressée."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Configurations des mises à niveau de Cura 4.3 vers Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Générateur de G-Code compressé"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Mise à niveau de 4.3 vers 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Vérifie les mises à jour du firmware."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Configurations des mises à niveau de Cura 2.1 vers Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Vérificateur des mises à jour du firmware"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Mise à niveau vers 2.1 vers 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Envoie des informations anonymes sur le découpage. Peut être désactivé dans les préférences."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Configurations des mises à jour de Cura 4.1 vers Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Information sur le découpage"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Mise à jour de 4.1 vers 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Offre la possibilité de lire et d'écrire des profils matériels basés sur XML."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Profils matériels"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Se connecte à la Digital Library, permettant à Cura d'ouvrir des fichiers à partir de cette dernière et d'y enregistrer des fichiers."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Mises à niveau des configurations de Cura 4.5 vers Cura 4.6."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Ultimaker Digital Library"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Mise à niveau de 4.5 vers 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Rechercher, gérer et installer de nouveaux paquets Cura."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Configurations des mises à niveau de Cura 3.3 vers Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Boîte à outils"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Mise à niveau de 3.3 vers 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Enregistre le G-Code dans un fichier."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Mises à niveau des configurations de Cura 4.8 vers Cura 4.9."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Générateur de G-Code"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "Mise à niveau de 4.8 vers 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Fournit la Vue simulation."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Met à niveau les configurations, de Cura 2.7 vers Cura 3.0."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Vue simulation"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Mise à niveau de version, de 2.7 vers 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Mises à niveau des configurations de Cura 4.5 vers Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Configurations des mises à niveau de Cura 4.4 vers Cura 4.5."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Mise à niveau de 4.5 vers 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Mise à niveau de 4.4 vers 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Configurations des mises à niveau de Cura 2.5 vers Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Met à niveau les configurations, de Cura 3.0 vers Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Mise à niveau de 2.5 vers 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Mise à niveau de version, de 3.0 vers 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6285,115 +6276,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "Mise à niveau de 4.6.0 vers 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Mises à niveau des configurations de Cura 4.7 vers Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Configurations des mises à niveau de Cura 2.6 vers Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Mise à niveau de 4.7 vers 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Mise à niveau de 2.6 vers 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Configurations des mises à niveau de Cura 3.4 vers Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Configurations des mises à jour de Cura 4.2 vers Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Mise à niveau de 3.4 vers 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Mise à jour de 4.2 vers 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Configurations des mises à niveau de Cura 2.1 vers Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Configurations des mises à niveau de Cura 4.0 vers Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Mise à niveau vers 2.1 vers 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Mise à niveau de 4.0 vers 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Configurations des mises à niveau de Cura 3.2 vers Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Mises à niveau des configurations de Cura 4.6.2 vers Cura 4.7."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Mise à niveau de 3.2 vers 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Mise à niveau de 4.6.2 vers 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Mises à niveau des configurations de Cura 4.8 vers Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Mises à niveau des configurations de Cura 4.9 vers Cura 4.10."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "Mise à niveau de 4.8 vers 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "Mise à niveau de 4.9 vers 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Mises à niveau des configurations de Cura 4.6.2 vers Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Configurations des mises à niveau de Cura 2.2 vers Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Mise à niveau de 4.6.2 vers 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Mise à niveau de 2.2 vers 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Configurations des mises à jour de Cura 4.2 vers Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Configurations des mises à niveau de Cura 3.2 vers Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Mise à jour de 4.2 vers 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Mise à niveau de 3.2 vers 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Configurations des mises à niveau de Cura 4.3 vers Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Configurations des mises à niveau de Cura 2.5 vers Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Mise à niveau de 4.3 vers 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Mise à niveau de 2.5 vers 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Mises à niveau des configurations de Cura 4.9 vers Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Configurations des mises à niveau de Cura 3.5 vers Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "Mise à niveau de 4.9 vers 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Mise à niveau de 3.5 vers 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Met à niveau les configurations, de Cura 2.7 vers Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Configurations des mises à niveau de Cura 3.4 vers Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Mise à niveau de version, de 2.7 vers 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Mise à niveau de 3.4 vers 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Configurations des mises à niveau de Cura 2.6 vers Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Mises à niveau des configurations de Cura 4.7 vers Cura 4.8."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Mise à niveau de 2.6 vers 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Mise à niveau de 4.7 vers 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6405,105 +6396,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "Mise à niveau de la version 4.11 vers la version 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Configurations des mises à niveau de Cura 3.3 vers Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Sauvegardez et restaurez votre configuration."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Mise à niveau de 3.3 vers 3.4"
+msgid "Cura Backups"
+msgstr "Sauvegardes Cura"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Met à niveau les configurations, de Cura 3.0 vers Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Fournit la prise en charge de l'importation de profils Cura."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Mise à niveau de version, de 3.0 vers 3.1"
+msgid "Cura Profile Reader"
+msgstr "Lecteur de profil Cura"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Configurations des mises à niveau de Cura 4.0 vers Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Envoie des informations anonymes sur le découpage. Peut être désactivé dans les préférences."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Mise à niveau de 4.0 vers 4.1"
+msgid "Slice info"
+msgstr "Information sur le découpage"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Configurations des mises à niveau de Cura 4.4 vers Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Fournit la prise en charge de l'importation de profils à partir de fichiers g-code."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Mise à niveau de 4.4 vers 4.5"
+msgid "G-code Profile Reader"
+msgstr "Lecteur de profil G-Code"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Configurations des mises à niveau de Cura 2.2 vers Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "Enregistre le G-Code dans une archive compressée."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Mise à niveau de 2.2 vers 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Générateur de G-Code compressé"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Configurations des mises à jour de Cura 4.1 vers Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Extension qui permet le post-traitement des scripts créés par l'utilisateur"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Mise à jour de 4.1 vers 4.2"
+msgid "Post Processing"
+msgstr "Post-traitement"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Configurations des mises à niveau de Cura 3.5 vers Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Crée un maillage effaceur pour bloquer l'impression du support en certains endroits"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Mise à niveau de 3.5 vers 4.0"
+msgid "Support Eraser"
+msgstr "Effaceur de support"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Gère les connexions réseau vers les imprimantes Ultimaker en réseau."
+msgid "Provides a preview stage in Cura."
+msgstr "Fournit une étape de prévisualisation dans Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Connexion réseau Ultimaker"
+msgid "Preview Stage"
+msgstr "Étape de prévisualisation"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Fournit la prise en charge de la lecture de fichiers modèle 3D."
+msgid "Provides the X-Ray view."
+msgstr "Permet la vue Rayon-X."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Lecteur de Trimesh"
+msgid "X-Ray View"
+msgstr "Vue Rayon-X"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Fournit un support pour la lecture des paquets de format Ultimaker."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Fournit les actions de la machine pour les machines Ultimaker (telles que l'assistant de calibration du plateau, sélection des mises à niveau, etc.)"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Lecteur UFP"
+msgid "Ultimaker machine actions"
+msgstr "Actions de la machine Ultimaker"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6515,35 +6516,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Vue solide"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Permet l'écriture de fichiers 3MF."
+msgid "Allows loading and displaying G-code files."
+msgstr "Permet le chargement et l'affichage de fichiers G-Code."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Générateur 3MF"
+msgid "G-code Reader"
+msgstr "Lecteur G-Code"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Fournit une étape de surveillance dans Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Permet de modifier les paramètres de la machine (tels que volume d'impression, taille de buse, etc.)"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Étape de surveillance"
+msgid "Machine Settings Action"
+msgstr "Action Paramètres de la machine"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Vérifie les modèles et la configuration de l'impression pour déceler d'éventuels problèmes d'impression et donne des suggestions."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Accepte les G-Code et les envoie à une imprimante. Ce plugin peut aussi mettre à jour le firmware."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Contrôleur de modèle"
+msgid "USB printing"
+msgstr "Impression par USB"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Synchroniser les matériaux"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "Vous devez quitter et redémarrer {} avant que les changements apportés ne prennent effet."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "Synchronisation..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Changements détectés à partir de votre compte Ultimaker"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "Vous souhaitez synchroniser du matériel et des logiciels avec votre compte ?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Synchroniser"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Décliner et supprimer du compte"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "Échec de téléchargement des plugins {}"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Plug-in d'accord de licence"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Conversion de l'image..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "La largeur en millimètres sur le plateau."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Marché en ligne"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "Vous devez redémarrer Cura pour que les changements apportés aux paquets ne prennent effet."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Installer"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Installé"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Premium"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Aller sur le Marché en ligne"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Rechercher des matériaux"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Compatibilité"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Machine"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Plateau"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Support"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Qualité"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Fiche technique"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Fiche de sécurité"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Directives d'impression"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Site Internet"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "<a href='%1'>Connexion</a> nécessaire pour l'installation ou la mise à jour"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>Acheter des bobines de matériau</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Mise à jour"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Mise à jour"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Mis à jour"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Précédent"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Plug-ins"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Installé"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "S'installera au redémarrage"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "<a href='%1'>Connexion</a> nécessaire pour effectuer la mise à jour"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Revenir à une version précédente"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Désinstaller"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Contributions de la communauté"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Plug-ins de la communauté"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Matériaux génériques"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Récupération des paquets..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Site Internet"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "E-mail"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Veuillez vous connecter pour obtenir les plug-ins et matériaux vérifiés pour Ultimaker Cura Enterprise"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Version"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Dernière mise à jour"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Téléchargements"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Plug-ins installés"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "Aucun plug-in n'a été installé."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Matériaux installés"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "Aucun matériau n'a été installé."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Plug-ins groupés"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Matériaux groupés"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Impossible de se connecter à la base de données Cura Package. Veuillez vérifier votre connexion."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "Vous devez accepter la licence pour installer le package"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Changements à partir de votre compte"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Ignorer"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "Les packages suivants seront ajoutés :"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "Les packages suivants ne peuvent pas être installés en raison d'une version incompatible de Cura :"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Confirmer la désinstallation"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Vous désinstallez des matériaux et/ou des profils qui sont encore en cours d'utilisation. La confirmation réinitialisera les matériaux / profils suivants à leurs valeurs par défaut."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Matériaux"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Profils"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Confirmer"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Certains éléments pourraient causer des problèmes à cette impression. Cliquez pour voir les conseils d'ajustement."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Prise en charge de la bibliothèque pour le traitement des objets planaires"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "Vous avez personnalisé certains paramètres de profil.\n"
+#~ "Souhaitez-vous conserver ces paramètres modifiés après avoir changé de profil ?\n"
+#~ "Vous pouvez également annuler les modifications pour charger les valeurs par défaut de '%1'."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "&Plateau"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Créer"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Dupliquer"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Imprimante : %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Mettre à jour le profil à l'aide des paramètres / forçages actuels"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Thème :"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Vous devez redémarrer l'application pour que ces changements prennent effet."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Plus d'informations"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Créer"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Synchroniser les imprimantes"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Imprimante"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Unité"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Afficher le guide de dépannage en ligne"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Ajouter d'autres matériaux du Marketplace"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Réorganiser tous les modèles sur tous les plateaux"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Marché en ligne"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Rechercher, gérer et installer de nouveaux paquets Cura."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Boîte à outils"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Fournit la Vue simulation."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/fr_FR/fdmextruder.def.json.po b/resources/i18n/fr_FR/fdmextruder.def.json.po
index 6910d7a71c..6478e3fe65 100644
--- a/resources/i18n/fr_FR/fdmextruder.def.json.po
+++ b/resources/i18n/fr_FR/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:16+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: French\n"
diff --git a/resources/i18n/fr_FR/fdmprinter.def.json.po b/resources/i18n/fr_FR/fdmprinter.def.json.po
index 1a7094e7c2..573f454976 100644
--- a/resources/i18n/fr_FR/fdmprinter.def.json.po
+++ b/resources/i18n/fr_FR/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:16+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: French <info@lionbridge.com>, French <info@bothof.nl>\n"
@@ -56,7 +56,9 @@ msgctxt "machine_start_gcode description"
 msgid ""
 "G-code commands to be executed at the very start - separated by \n"
 "."
-msgstr "Commandes G-Code à exécuter au tout début, séparées par \n."
+msgstr ""
+"Commandes G-Code à exécuter au tout début, séparées par \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
@@ -68,7 +70,9 @@ msgctxt "machine_end_gcode description"
 msgid ""
 "G-code commands to be executed at the very end - separated by \n"
 "."
-msgstr "Commandes G-Code à exécuter tout à la fin, séparées par \n."
+msgstr ""
+"Commandes G-Code à exécuter tout à la fin, séparées par \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "material_guid label"
@@ -462,8 +466,8 @@ msgstr "Polygone de la tête de la machine et du ventilateur"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "Une silhouette 2D de la tête d'impression (avec les capuchons du ventilateur)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -736,6 +740,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "Diamètre de la roue qui entraîne le matériau dans le chargeur."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Qualité"
@@ -956,6 +970,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Le nombre de parois. Lorsqu'elle est calculée par l'épaisseur de la paroi, cette valeur est arrondie à un nombre entier."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Distance d'essuyage paroi extérieure"
@@ -986,14 +1050,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Optimiser l'ordre dans lequel des parois sont imprimées de manière à réduire le nombre de retraits et les distances parcourues. La plupart des pièces bénéficieront de cette possibilité, mais certaines peuvent en fait prendre plus de temps à l'impression ; veuillez dès lors comparer les estimations de durée d'impression avec et sans optimisation. La première couche n'est pas optimisée lorsque le type d'adhérence au plateau est défini sur bordure."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Extérieur avant les parois intérieures"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Imprimer les parois de l'extérieur vers l'intérieur lorsque cette option est activée. Cela peut permettre d'améliorer la précision dimensionnelle en X et Y lors de l'utilisation de plastique haute viscosité comme l'ABS ; en revanche, cela peut réduire la qualité de l'impression de la surface extérieure, en particulier sur les porte-à-faux."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1006,94 +1080,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Imprime une paroi supplémentaire une couche sur deux. Ainsi, le remplissage est pris entre ces parois supplémentaires pour créer des impressions plus solides."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Compenser les chevauchements de paroi"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Compense le débit pour les parties d'une paroi imprimées aux endroits où une paroi est déjà en place."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Compenser les chevauchements de paroi externe"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Compenser le débit pour les parties d'une paroi externe imprimées aux endroits où une paroi est déjà en place."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Compenser les chevauchements de paroi intérieure"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Compenser le débit pour les parties d'une paroi intérieure imprimées aux endroits où une paroi est déjà en place."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Débit minimal de la paroi"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Pourcentage de débit minimum autorisé pour une ligne de paroi. La compensation de chevauchement de paroi réduit le débit d'une paroi lorsqu'elle se trouve à proximité d'une paroi existante. Les parois dont le débit est inférieur à cette valeur seront remplacées par un déplacement. Lors de l'utilisation de ce paramètre, vous devez activer la compensation de chevauchement de paroi et imprimer la paroi externe avant les parois internes."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Préférer la rétractation"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Si cette option est activée, la rétraction est utilisée à la place des détours pour les déplacements qui remplacent les parois dont le débit est inférieur au seuil de débit minimal."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Remplir les trous entre les parois"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Imprime les remplissages entre les parois lorsqu'aucune paroi ne convient."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Nulle part"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Imprimer parois fines"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Partout"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Imprimer les parties du modèle qui sont horizontalement plus fines que la taille de la buse."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Filtrer les très petits trous"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Filtrer les très petits trous pour réduire la présence de gouttes à l'extérieur du modèle."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Imprimer parois fines"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Imprimer les parties du modèle qui sont horizontalement plus fines que la taille de la buse."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -1728,10 +1792,7 @@ msgstr "Motif de remplissage"
 #: fdmprinter.def.json
 msgctxt "infill_pattern description"
 msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object."
-msgstr "Le motif du matériau de remplissage de l'impression. La ligne et le remplissage en zigzag changent de sens à chaque alternance de couche, réduisant ainsi"
-" les coûts matériels. Les motifs en grille, en triangle, tri-hexagonaux, cubiques, octaédriques, quart cubiques, entrecroisés et concentriques sont entièrement"
-" imprimés sur chaque couche. Les remplissages gyroïdes, cubiques, quart cubiques et octaédriques changent à chaque couche afin d'offrir une répartition"
-" plus égale de la solidité dans chaque direction. Le remplissage éclair tente de minimiser le remplissage, en ne supportant que le plafond de l'objet."
+msgstr "Le motif du matériau de remplissage de l'impression. La ligne et le remplissage en zigzag changent de sens à chaque alternance de couche, réduisant ainsi les coûts matériels. Les motifs en grille, en triangle, tri-hexagonaux, cubiques, octaédriques, quart cubiques, entrecroisés et concentriques sont entièrement imprimés sur chaque couche. Les remplissages gyroïdes, cubiques, quart cubiques et octaédriques changent à chaque couche afin d'offrir une répartition plus égale de la solidité dans chaque direction. Le remplissage éclair tente de minimiser le remplissage, en ne supportant que le plafond de l'objet."
 
 #: fdmprinter.def.json
 msgctxt "infill_pattern option grid"
@@ -2055,8 +2116,7 @@ msgstr "Angle de redressement du remplissage éclair"
 #: fdmprinter.def.json
 msgctxt "lightning_infill_straightening_angle description"
 msgid "The infill lines are straightened out to save on printing time. This is the maximum angle of overhang allowed across the length of the infill line."
-msgstr "Les lignes de remplissage sont redressées pour gagner du temps d'impression. Il s'agit de l'angle maximal de saillie autorisé sur la longueur de la ligne"
-" de remplissage."
+msgstr "Les lignes de remplissage sont redressées pour gagner du temps d'impression. Il s'agit de l'angle maximal de saillie autorisé sur la longueur de la ligne de remplissage."
 
 #: fdmprinter.def.json
 msgctxt "material label"
@@ -2199,6 +2259,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Pour compenser la contraction du matériau lors de son refroidissement, le modèle est mis à l'échelle avec ce facteur."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Matériau cristallin"
@@ -2709,24 +2789,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "Les premières couches sont imprimées plus lentement que le reste du modèle afin d’obtenir une meilleure adhérence au plateau et d’améliorer le taux de réussite global des impressions. La vitesse augmente graduellement à chacune de ces couches."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Égaliser le débit de filaments"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Imprimer des lignes plus fines que la normale plus rapidement afin que la quantité de matériau extrudé par seconde reste la même. La présence de parties fines dans votre modèle peut nécessiter l'impression de lignes d'une largeur plus petite que prévue dans les paramètres. Ce paramètre contrôle les changements de vitesse pour de telles lignes."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Vitesse maximale pour l'égalisation du débit"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Vitesse d’impression maximale lors du réglage de la vitesse d'impression afin d'égaliser le débit."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4464,6 +4534,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "Le train d'extrudeuse à utiliser pour l'impression de la jupe/la bordure/du radeau. Cela est utilisé en multi-extrusion."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Nombre de lignes de la jupe"
@@ -4628,6 +4738,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "La distance entre les lignes du radeau pour les couches supérieures de celui-ci. Cet espace doit être égal à la largeur de ligne afin de créer une surface solide."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Épaisseur intermédiaire du radeau"
@@ -5128,6 +5248,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "L'écart maximum autorisé lors de la réduction de la résolution pour le paramètre Résolution maximum. Si vous augmentez cette valeur, l'impression sera moins précise, mais le G-Code sera plus petit. L'écart maximum est une limite pour la résolution maximum. Donc si les deux entrent en conflit, l'Écart maximum restera valable."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Modes spéciaux"
@@ -6422,6 +6552,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "Les petites structures sur la première couche seront imprimées à ce pourcentage de la vitesse d'impression normale. Une impression plus lente peut aider à l'adhésion et à la précision."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Paramètres de ligne de commande"
@@ -6481,6 +6641,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matrice de transformation à appliquer au modèle lors de son chargement depuis le fichier."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "Une silhouette 2D de la tête d'impression (avec les capuchons du ventilateur)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Extérieur avant les parois intérieures"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Imprimer les parois de l'extérieur vers l'intérieur lorsque cette option est activée. Cela peut permettre d'améliorer la précision dimensionnelle en X et Y lors de l'utilisation de plastique haute viscosité comme l'ABS ; en revanche, cela peut réduire la qualité de l'impression de la surface extérieure, en particulier sur les porte-à-faux."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Compenser les chevauchements de paroi"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Compense le débit pour les parties d'une paroi imprimées aux endroits où une paroi est déjà en place."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Compenser les chevauchements de paroi externe"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Compenser le débit pour les parties d'une paroi externe imprimées aux endroits où une paroi est déjà en place."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Compenser les chevauchements de paroi intérieure"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Compenser le débit pour les parties d'une paroi intérieure imprimées aux endroits où une paroi est déjà en place."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Débit minimal de la paroi"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Pourcentage de débit minimum autorisé pour une ligne de paroi. La compensation de chevauchement de paroi réduit le débit d'une paroi lorsqu'elle se trouve à proximité d'une paroi existante. Les parois dont le débit est inférieur à cette valeur seront remplacées par un déplacement. Lors de l'utilisation de ce paramètre, vous devez activer la compensation de chevauchement de paroi et imprimer la paroi externe avant les parois internes."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Préférer la rétractation"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Si cette option est activée, la rétraction est utilisée à la place des détours pour les déplacements qui remplacent les parois dont le débit est inférieur au seuil de débit minimal."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Remplir les trous entre les parois"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Imprime les remplissages entre les parois lorsqu'aucune paroi ne convient."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Nulle part"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Partout"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Filtrer les très petits trous"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Filtrer les très petits trous pour réduire la présence de gouttes à l'extérieur du modèle."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Égaliser le débit de filaments"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Imprimer des lignes plus fines que la normale plus rapidement afin que la quantité de matériau extrudé par seconde reste la même. La présence de parties fines dans votre modèle peut nécessiter l'impression de lignes d'une largeur plus petite que prévue dans les paramètres. Ce paramètre contrôle les changements de vitesse pour de telles lignes."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Vitesse maximale pour l'égalisation du débit"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Vitesse d’impression maximale lors du réglage de la vitesse d'impression afin d'égaliser le débit."
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "Commandes G-Code à exécuter au tout début, séparées par \\n."
diff --git a/resources/i18n/hu_HU/cura.po b/resources/i18n/hu_HU/cura.po
index 6bc614a1f4..63771e1a88 100644
--- a/resources/i18n/hu_HU/cura.po
+++ b/resources/i18n/hu_HU/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2020-03-24 09:36+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: ATI-SZOFT\n"
@@ -17,5951 +17,5946 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.2.4\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Nem sikerült archívumot létrehozni a felhasználói adatkönyvtárból: {}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Előkészítés"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Biztonsági mentés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura Profil"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Megpróbált visszaállítani egy Cura biztonsági másolatot anélkül, hogy megfelelő adatok vagy meta adatok lennének."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Egy olyan Cura biztonsági mentést próbált visszaállítani, amelyiknek a verziója magasabb a jelenlegitől."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA digitális eszközcsere"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Bináris"
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF beágyazott JSON"
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford háromszög formátum"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Tömörített COLLADA digitális eszközcsere"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Nem sikerült elérni a frissítési információkat."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
 msgctxt "@action:button"
-msgid "Learn more"
-msgstr ""
+msgid "How to update"
+msgstr "Hogyan frissíts"
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Monitor"
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Save to Removable Drive"
+msgstr "Mentés külső meghajtóra"
 
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "Save to Removable Drive {0}"
+msgstr "Mentés külső meghajtóra {0}"
 
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Az nyomtatási szint csökken a \"Nyomtatási sorrend\" beállítása miatt, ez megakadályozza, hogy a mechanika beleütközzön a nyomtatott tárgyba."
+msgid "There are no file formats available to write with!"
+msgstr "Nincsenek elérhető fájlformátumok az íráshoz!"
 
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#, python-brace-format
+msgctxt "@info:progress Don't translate the XML tags <filename>!"
+msgid "Saving to Removable Drive <filename>{0}</filename>"
+msgstr "Mentés külső meghajóra <filename>{0}</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Építési térfogat"
+msgid "Saving"
+msgstr "Mentés"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Sikertelen mentés <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nincs felülírva"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#, python-brace-format
+msgctxt "@info:status Don't translate the tag {device}!"
+msgid "Could not find a file name when trying to write to {device}."
+msgstr "Nem található a fájlnév {device} -on az írási művelethez."
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Ismeretlen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Could not save to removable drive {0}: {1}"
+msgstr "Sikertelen mentés a {0}: {1} meghajtóra."
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Az alábbi nyomtató (k) nem csatlakoztathatók, mert egy csoporthoz tartoznak"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Hiba"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Elérhető hálózati nyomtatók"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Saved to Removable Drive {0} as {1}"
+msgstr "Mentve a {0} meghajtóra, mint {1}"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+msgctxt "@info:title"
+msgid "File Saved"
+msgstr "Fájl Mentve"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Egyéni profil"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+msgctxt "@action:button"
+msgid "Eject"
+msgstr "Leválaszt"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Összes támasz típus ({0})"
+msgctxt "@action"
+msgid "Eject removable device {0}"
+msgstr "{0} meghajtó leválasztása"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
-msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Minden fájl (*)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Ejected {0}. You can now safely remove the drive."
+msgstr "{0} leválasztva. Eltávolíthatod az adathordozót."
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+msgctxt "@info:title"
+msgid "Safely Remove Hardware"
+msgstr "Hardver biztonságos eltávolítása"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Failed to eject {0}. Another program may be using the drive."
+msgstr "{0} leválasztása sikertelen. A meghajtó használatban van."
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Figyelem"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Cserélhető meghajtó"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "AMF File"
+msgstr "AMF fájl"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker formátumcsomag"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "Custom Material"
-msgstr "Egyedi anyag"
+msgid "Per Model Settings"
+msgstr "Modellenkénti beállítások"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Egyedi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Modellenkénti beállítások konfigurálása"
 
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Sikertelen bejelentkezés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Firmware frissítés"
 
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Új hely keresése az objektumokhoz"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "A Cura olyan anyagprofilt észlel, amelyet még nem telepítettek a(z) {0} csoport gazdanyomtatójára."
 
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Hely keresés"
+msgid "Sending materials to printer"
+msgstr "Anyagok küldése a nyomtatóra"
 
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Nincs elég hely az összes objektum építési térfogatához"
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Megpróbált csatlakozni a (z) {0} -hez, de a gép nem része a csoportnak.Látogasson el a weboldalra, és konfigurálhatja azt csoporttagnak."
 
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Nem találok helyet"
+msgid "Not a group host"
+msgstr "Nem csoport"
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Csoport konfiguráció"
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+msgctxt "@info:status"
+msgid "Sending Print Job"
+msgstr "Nyomtatási feladat küldése"
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "A nyomtatási feladat feltöltése a nyomtatóra."
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+msgctxt "@info:status"
+msgid "Print job queue is full. The printer can't accept a new job."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+msgctxt "@info:status"
+msgid "Please wait until the current job has been sent."
+msgstr "Várja meg, amíg az aktuális feladat elküldésre kerül."
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Gépek betöltése ..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+msgctxt "@info:title"
+msgid "Print error"
+msgstr "Nyomtatási hiba"
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+msgctxt "@info:status"
+msgid "Print job was successfully sent to the printer."
+msgstr "A nyomtatási feladat sikeresen elküldésre került a nyomtatóra."
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+msgctxt "@info:title"
+msgid "Data Sent"
+msgstr "Adatok elküldve"
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
+" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+msgctxt "@info:title"
+msgid "Are you ready for cloud printing?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Felület beállítása..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Interfészek betöltése..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+msgctxt "@action"
+msgid "Get started"
+msgstr "Kezdjük el"
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+msgctxt "@action"
+msgid "Learn more"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
 msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Egyszerre csak egy G-kód fájlt lehet betölteni. Az importálás kihagyva {0}"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Olyan nyomtatóval próbál csatlakozni, amelyen nem fut az Ultimaker Connect. Kérjük, frissítse a nyomtatón a firmware-t."
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Figyelem"
+msgid "Update your printer"
+msgstr "Frissítse a nyomtatót"
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Nem nyitható meg más fájl, ha a G-kód betöltődik. Az importálás kihagyva {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Nem sikerült feltölteni az adatokat a nyomtatóra."
 
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
-msgid "Error"
-msgstr "Hiba"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr ""
+msgid "Network error"
+msgstr "Hálózati hiba"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Bezár"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Hálózati nyomtatás"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Következő"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+msgctxt "@properties:tooltip"
+msgid "Print over network"
+msgstr "Hálózati nyomtatás"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+msgctxt "@info:status"
+msgid "Connected over the network"
+msgstr "Csatlakozva hálózaton keresztül"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Hozzáad"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "holnap"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Elvet"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "ma"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Csoport #{group_nr}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Hálózati csatlakozás"
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Külső fal"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+msgctxt "info:status"
+msgid "New printer detected from your Ultimaker account"
+msgid_plural "New printers detected from your Ultimaker account"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Belső falak"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#, python-brace-format
+msgctxt "info:status Filled in with printer name and printer model."
+msgid "Adding printer {name} ({model}) from your account"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Héj"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#, python-brace-format
+msgctxt "info:{0} gets replaced by a number of printers"
+msgid "... and {0} other"
+msgid_plural "... and {0} others"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Kitöltés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+msgctxt "info:status"
+msgid "Printers added from Digital Factory:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Támasz kitöltés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+msgctxt "info:status"
+msgid "A cloud connection is not available for a printer"
+msgid_plural "A cloud connection is not available for some printers"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Támasz interface"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+msgctxt "info:status"
+msgid "This printer is not linked to the Digital Factory:"
+msgid_plural "These printers are not linked to the Digital Factory:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Támasz"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+msgctxt "info:name"
+msgid "Ultimaker Digital Factory"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Szoknya"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#, python-brace-format
+msgctxt "info:status"
+msgid "To establish a connection, please visit the {website_link}"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Elsődleges torony"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+msgctxt "@action:button"
+msgid "Keep printer configurations"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Átmozgás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+msgctxt "@action:button"
+msgid "Remove printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Visszahúzás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "{printer_name} will be removed until the next account sync."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Egyéb"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "A Cura nem tud elindulni"
+msgid "Remove printers?"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#, python-brace-format
+msgctxt "@label"
 msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
+"You are about to remove {0} printer from Cura. This action cannot be undone.\n"
+"Are you sure you want to continue?"
+msgid_plural ""
+"You are about to remove {0} printers from Cura. This action cannot be undone.\n"
+"Are you sure you want to continue?"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+msgctxt "@label"
+msgid ""
+"You are about to remove all printers from Cura. This action cannot be undone.\n"
+"Are you sure you want to continue?"
 msgstr ""
-"<p><b>Hoppá, az Ultimaker Cura olyan dolgokkal találkozott, amelyek hibásnak tűnnek.</p></b>\n"
-"                    <p>Az indítás során helyrehozhatatlan hibát tapasztaltunkEzt valószínűleg néhány helytelen konfigurációs fájl okozta. Javasoljuk, hogy biztonsági másolatból állítsa vissza a konfigurációt.</p>\n"
-"                    <p>A biztonsági mentések a konfigurációs mappában találhatók.</p>\n"
-"                    <p>Kérjük, küldje el nekünk ezt a hibajelentést a probléma megoldásához.</p>\n"
-"                "
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
 msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Hibajelentés küldése az Ultimaker -nek"
+msgid "Print via cloud"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Hibajelentés részletei"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Konfigurációs mappa megnyitása"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
 msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Konfiguráció biztonsági mentés és visszaállítás"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Összeomlás jelentés"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
+msgid "Monitor print"
 msgstr ""
-"<p><b>Végzetes hiba történt Cura-ban. Kérjük, küld el nekünk az összeomlás jelentését, hogy javítani tudjuk a hibát.</p></b>\n"
-"            <p>Kérjük használd a \"Jelentés küldés\" gombot a hibajelentés postázásához,  így az automatikusan a szerverünkre kerül.</p>\n"
-"        "
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Rendszer információ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Ismeretlen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Cura verzió"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D-s modellsegéd"
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
 msgstr ""
+"<p>Lehetséges, hogy egy vagy több 3D-s modellt nem lehet optimálisan kinyomtatni a modell mérete és az anyagkonfiguráció miatt:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Itt Megtudhatja, hogyan lehet a lehető legjobb nyomtatási minőséget és megbízhatóságot biztosítani.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Felület"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qt verzió"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQt verzió"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Szimuláció nézet"
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Még nincs inicializálva<br/>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGL Verzió: {version}</li>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL terjesztő: {vendor}</li>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Réteg nézet"
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL Renderer: {renderer}</li>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "A GCodeWriter nem támogatja a szöveges nélüli módot."
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Hibakövetés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Készítse elő a G-kódot az exportálás előtt."
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Naplók"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code Fájl"
 
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Jelentés küldés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Hiba a 3mf fájl írásakor."
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Az Ultimaker fiókkiszolgáló elérhetetlen."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+msgctxt "@error"
+msgid "There is no workspace yet to write. Please add a printer first."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Kérjük, adja meg a szükséges jogosultságokat az alkalmazás engedélyezéséhez."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Valami váratlan esemény történt a bejelentkezéskor, próbálkozzon újra."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Nincs olvasható válasz."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Tárgyak többszörözése és elhelyezése"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF fájl"
 
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Tárgyak elhelyezése"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura projekt 3MF fájl"
 
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Tárgy elhelyezése"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Tömörített G-kód fájl"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Nem támogatott"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Fúvóka"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "A beállításokat megváltoztattuk, hogy azok megfeleljenek az jelenleg elérhető extrudereknek:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Beállítások frissítve"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Nem lehet szeletelni a jelenlegi alapanyaggal, mert nem kompatibilis a kiválasztott nyomtatóval, vagy a beállításaival."
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder(ek) kikapcsolva"
+msgid "Unable to slice"
+msgstr "Nem lehet szeletelni"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "A fájl már létezik"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Nem lehet szeletelni ezekkel a beállításokkal. Ezek a beállítások okoznak hibát: {0}"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "A <filename>{0}</filename> fájl már létezik. Biztosan szeretnéd, hogy felülírjuk?"
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Nem lehet szeletelni pár modell beállítás miatt. A következő beállításokokoznak hibát egy vagy több modellnél: {error_labels}"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
 msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "Érvénytelen fájl URL:"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Nem lehet szeletelni, mert az elsődleges torony, vagy az elsődleges pozíció érvénytelen."
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "A profil exportálása nem sikerült <filename>{0}</filename>: <message>{1}</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Nem lehet szeletelni, mert vannak olyan objektumok, amelyek a letiltott Extruderhez vannak társítva.%s."
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "A profil exportálása nem sikerült <filename>{0}</filename>:Az író beépülő modul hibát jelez."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Profil exportálva ide: <filename>{0}</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Réteg feldolgozás"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
 msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Sikeres export"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Sikertelen profil importálás <filename>{0}</filename>: {1} -ból"
+msgid "Information"
+msgstr "Információ"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Nem importálható a profil <filename>{0}</filename> -ból, mielőtt hozzá nem adunk egy nyomtatót."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D Fájl"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Nincs egyéni profil a <filename>{0}</filename> fájlban, amelyet importálni lehetne"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG kép"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "A profil importálása nem sikerült <filename>{0}</filename>:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG kép"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Ez a <filename>{0}</filename> profil helytelen adatokat tartamaz, ezért nem importálható."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG kép"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Nem importálható a profil <filename>{0}</filename>:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP kép"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF kép"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "A {0} fájl nem tartalmaz érvényes profilt."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Fúvóka"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "A(z) {0} profil ismeretlen fájltípusú vagy sérült."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Egyedi profil"
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "A projekt fájl <filename>{0}</filename> egy ismeretlen <message>{1}</message> géptípust tartalmaz.Gépet nem lehet importálni. Importálj helyette modelleket."
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Hiányzik a profil minőségi típusa."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Projekt fájl megnyitása"
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Modellenkénti beállítások"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Ajánlott"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Modellenkénti beállítások konfigurálása"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Egyedi"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura Profil"
+msgid "3MF File"
+msgstr "3MF fájl"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
-msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D Fájl"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Hiba történt a biztonsági másolat visszaállításakor."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 profil"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
 msgctxt "@info:title"
 msgid "Backups"
 msgstr "Biztonsági mentések"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
 msgctxt "@info:backup_status"
 msgid "There was an error while uploading your backup."
 msgstr "Hiba történt a biztonsági mentés feltöltése közben."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
 msgctxt "@info:backup_status"
 msgid "Creating your backup..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
 msgctxt "@info:backup_status"
 msgid "There was an error while creating your backup."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
 msgctxt "@info:backup_status"
 msgid "Uploading your backup..."
 msgstr "A biztonsági mentés feltöltése ..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
 msgctxt "@info:backup_status"
 msgid "Your backup has finished uploading."
 msgstr "A biztonsági mentés feltöltése befejeződött."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
 msgctxt "@error:file_size"
 msgid "The backup exceeds the maximum file size."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
 msgctxt "@item:inmenu"
 msgid "Manage backups"
 msgstr "Bitonsági mentések kezelése"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Gép beállítások"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Biztonsági mentés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Hiba történt a biztonsági másolat visszaállításakor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "A GCodeGzWriter nem támogatja a nem szöveges módot."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Utólagos műveletek"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-kód módosítás"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
 msgid "Support Blocker"
 msgstr "Támasz blokkoló"
 
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
 msgid "Create a volume in which supports are not printed."
 msgstr "Hozzon létre egy kötetet, amelyben a támaszok nem kerülnek nyomtatásra."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Cserélhető meghajtó"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Save to Removable Drive"
-msgstr "Mentés külső meghajtóra"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Előnézet"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
 msgctxt "@item:inlistbox"
-msgid "Save to Removable Drive {0}"
-msgstr "Mentés külső meghajtóra {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
-msgctxt "@info:status"
-msgid "There are no file formats available to write with!"
-msgstr "Nincsenek elérhető fájlformátumok az íráshoz!"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
-#, python-brace-format
-msgctxt "@info:progress Don't translate the XML tags <filename>!"
-msgid "Saving to Removable Drive <filename>{0}</filename>"
-msgstr "Mentés külső meghajóra <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
-msgctxt "@info:title"
-msgid "Saving"
-msgstr "Mentés"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Sikertelen mentés <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
-#, python-brace-format
-msgctxt "@info:status Don't translate the tag {device}!"
-msgid "Could not find a file name when trying to write to {device}."
-msgstr "Nem található a fájlnév {device} -on az írási művelethez."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Could not save to removable drive {0}: {1}"
-msgstr "Sikertelen mentés a {0}: {1} meghajtóra."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Saved to Removable Drive {0} as {1}"
-msgstr "Mentve a {0} meghajtóra, mint {1}"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
-msgctxt "@info:title"
-msgid "File Saved"
-msgstr "Fájl Mentve"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-msgctxt "@action:button"
-msgid "Eject"
-msgstr "Leválaszt"
+msgid "X-Ray view"
+msgstr "Röntgen nézet"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
 msgctxt "@action"
-msgid "Eject removable device {0}"
-msgstr "{0} meghajtó leválasztása"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Ejected {0}. You can now safely remove the drive."
-msgstr "{0} leválasztva. Eltávolíthatod az adathordozót."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
-msgctxt "@info:title"
-msgid "Safely Remove Hardware"
-msgstr "Hardver biztonságos eltávolítása"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Failed to eject {0}. Another program may be using the drive."
-msgstr "{0} leválasztása sikertelen. A meghajtó használatban van."
+msgid "Level build plate"
+msgstr "Tárgyasztal szint"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Firmware frissítés"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 profil"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Ajánlott"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Egyedi"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "A projekt fájl <filename>{0}</filename> egy ismeretlen <message>{1}</message> géptípust tartalmaz.Gépet nem lehet importálni. Importálj helyette modelleket."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Projekt fájl megnyitása"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr ""
+msgid "Select upgrades"
+msgstr "Válassz frissítést"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF fájl"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
 msgctxt "@info:error"
-msgid "Can't write to UFP file:"
+msgid "Could not reach Marketplace."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker formátumcsomag"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code Fájl"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Előnézet"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgen nézet"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Réteg feldolgozás"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "Információ"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
+msgctxt "@label"
+msgid "Installed Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
+msgctxt "@label"
+msgid "Installed Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
+msgctxt "@label"
+msgid "Bundled Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
+msgctxt "@label"
+msgid "Bundled Materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
 msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Nem lehet szeletelni a jelenlegi alapanyaggal, mert nem kompatibilis a kiválasztott nyomtatóval, vagy a beállításaival."
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Nem lehet szeletelni"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Nem lehet szeletelni ezekkel a beállításokkal. Ezek a beállítások okoznak hibát: {0}"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Nem lehet szeletelni pár modell beállítás miatt. A következő beállításokokoznak hibát egy vagy több modellnél: {error_labels}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Nem lehet szeletelni, mert az elsődleges torony, vagy az elsődleges pozíció érvénytelen."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Felület nézet"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
 msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Nem lehet szeletelni, mert vannak olyan objektumok, amelyek a letiltott Extruderhez vannak társítva.%s."
+msgid "Parsing G-code"
+msgstr "G-kód elemzés"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-kód részletek"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF fájl"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Győződj meg róla, hogy a G-kód igazodik a nyomtatódhoz és beállításaihoz, mielőtt elküldöd a fájlt. A G-kód ábrázolása nem biztos, hogy pontos."
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Tömörített G-kód fájl"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Utólagos műveletek"
+msgid "G File"
+msgstr "G fájl"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-kód módosítás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Gép beállítások"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
 msgctxt "@item:inmenu"
 msgid "USB printing"
 msgstr "USB nyomtatás"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print via USB"
 msgstr "Nyomtatás USB-ről"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
 msgctxt "@info:tooltip"
 msgid "Print via USB"
 msgstr "Nyomtatás USB-ről"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
 msgctxt "@info:status"
 msgid "Connected via USB"
 msgstr "Csatlakozás USB-n"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
 msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
 msgstr "USB nyomtatás folyamatban van, a Cura bezárása leállítja ezt a nyomtatást. Biztos vagy ebben?"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
 msgctxt "@message"
 msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
 msgstr "A nyomtatás még folyamatban van. A Cura nem indíthat új nyomtatást USB-n keresztül, amíg az előző nyomtatás be nem fejeződött."
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
 msgctxt "@message"
 msgid "Print in Progress"
 msgstr "Nyomtatás folyamatban"
 
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Előkészítés"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-kód elemzés"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-kód részletek"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Gépek betöltése ..."
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Győződj meg róla, hogy a G-kód igazodik a nyomtatódhoz és beállításaihoz, mielőtt elküldöd a fájlt. A G-kód ábrázolása nem biztos, hogy pontos."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G fájl"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG kép"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG kép"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG kép"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Felület beállítása..."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP kép"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Interfészek betöltése..."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF kép"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Tárgyasztal szint"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Válassz frissítést"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Egyszerre csak egy G-kód fájlt lehet betölteni. Az importálás kihagyva {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "A GCodeGzWriter nem támogatja a nem szöveges módot."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Nem nyitható meg más fájl, ha a G-kód betöltődik. Az importálás kihagyva {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Nem sikerült elérni a frissítési információkat."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
+msgctxt "@label"
+msgid "Default"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Hogyan frissíts"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
+msgctxt "@label"
+msgid "Engineering"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
 msgctxt "@text"
-msgid "Unable to read example data file."
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
+msgctxt "@label"
+msgid "Draft"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nincs felülírva"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Ismeretlen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Az alábbi nyomtató (k) nem csatlakoztathatók, mert egy csoporthoz tartoznak"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Elérhető hálózati nyomtatók"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Számított"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
 msgctxt "@action:button"
-msgid "Sync"
+msgid "Please sync the material profiles with your printers before starting to print."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
+msgctxt "@label"
+msgid "Custom Material"
+msgstr "Egyedi anyag"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Elfogadás"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
+msgctxt "@label"
+msgid "Custom"
+msgstr "Egyedi"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Kiegészítő licencszerződés"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
+msgctxt "@label"
+msgid "Custom profiles"
+msgstr "Egyéni profil"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "A GCodeWriter nem támogatja a szöveges nélüli módot."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Összes támasz típus ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Készítse elő a G-kódot az exportálás előtt."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Minden fájl (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Szimuláció nézet"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
-msgctxt "@info:title"
-msgid "No layers to show"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Réteg nézet"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Hálózati nyomtatás"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Hálózati nyomtatás"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
-msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Csatlakozva hálózaton keresztül"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Nem sikerült archívumot létrehozni a felhasználói adatkönyvtárból: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "holnap"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Megpróbált visszaállítani egy Cura biztonsági másolatot anélkül, hogy megfelelő adatok vagy meta adatok lennének."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "ma"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Egy olyan Cura biztonsági mentést próbált visszaállítani, amelyiknek a verziója magasabb a jelenlegitől."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Hálózati csatlakozás"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
 msgctxt "@info:status"
-msgid "Please wait until the current job has been sent."
-msgstr "Várja meg, amíg az aktuális feladat elküldésre kerül."
+msgid "Finding new location for objects"
+msgstr "Új hely keresése az objektumokhoz"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Print error"
-msgstr "Nyomtatási hiba"
+msgid "Finding Location"
+msgstr "Hely keresés"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
 msgctxt "@info:status"
-msgid "Print job was successfully sent to the printer."
-msgstr "A nyomtatási feladat sikeresen elküldésre került a nyomtatóra."
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Nincs elég hely az összes objektum építési térfogatához"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Data Sent"
-msgstr "Adatok elküldve"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Olyan nyomtatóval próbál csatlakozni, amelyen nem fut az Ultimaker Connect. Kérjük, frissítse a nyomtatón a firmware-t."
+msgid "Can't Find Location"
+msgstr "Nem találok helyet"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
 msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Frissítse a nyomtatót"
+msgid "Login failed"
+msgstr "Sikertelen bejelentkezés"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Külső fal"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Belső falak"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Nyomtatási feladat küldése"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Héj"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "A nyomtatási feladat feltöltése a nyomtatóra."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Kitöltés"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "A Cura olyan anyagprofilt észlel, amelyet még nem telepítettek a(z) {0} csoport gazdanyomtatójára."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Támasz kitöltés"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Anyagok küldése a nyomtatóra"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Támasz interface"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Nem sikerült feltölteni az adatokat a nyomtatóra."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Támasz"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Hálózati hiba"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Szoknya"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Megpróbált csatlakozni a (z) {0} -hez, de a gép nem része a csoportnak.Látogasson el a weboldalra, és konfigurálhatja azt csoporttagnak."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Elsődleges torony"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Nem csoport"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Átmozgás"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Csoport konfiguráció"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Visszahúzás"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Egyéb"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
 #, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
-" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Csoport #{group_nr}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
-msgctxt "@info:title"
-msgid "Are you ready for cloud printing?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
-msgctxt "@action"
-msgid "Get started"
-msgstr "Kezdjük el"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Bezár"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
-msgctxt "@action"
-msgid "Learn more"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Hozzáad"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
 msgctxt "@action:button"
-msgid "Print via cloud"
+msgid "Finish"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Elvet"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Következő"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr ""
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Az nyomtatási szint csökken a \"Nyomtatási sorrend\" beállítása miatt, ez megakadályozza, hogy a mechanika beleütközzön a nyomtatott tárgyba."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Építési térfogat"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
-msgctxt "info:status"
-msgid "New printer detected from your Ultimaker account"
-msgid_plural "New printers detected from your Ultimaker account"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
-#, python-brace-format
-msgctxt "info:status Filled in with printer name and printer model."
-msgid "Adding printer {name} ({model}) from your account"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
-#, python-brace-format
-msgctxt "info:{0} gets replaced by a number of printers"
-msgid "... and {0} other"
-msgid_plural "... and {0} others"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "A fájl már létezik"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
-msgctxt "info:status"
-msgid "Printers added from Digital Factory:"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "A <filename>{0}</filename> fájl már létezik. Biztosan szeretnéd, hogy felülírjuk?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
-msgctxt "info:status"
-msgid "A cloud connection is not available for a printer"
-msgid_plural "A cloud connection is not available for some printers"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "Érvénytelen fájl URL:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
-msgctxt "info:status"
-msgid "This printer is not linked to the Digital Factory:"
-msgid_plural "These printers are not linked to the Digital Factory:"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Nem támogatott"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
-msgctxt "info:name"
-msgid "Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
-#, python-brace-format
-msgctxt "info:status"
-msgid "To establish a connection, please visit the {website_link}"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "A beállításokat megváltoztattuk, hogy azok megfeleljenek az jelenleg elérhető extrudereknek:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
-msgctxt "@action:button"
-msgid "Keep printer configurations"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Beállítások frissítve"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
-msgctxt "@action:button"
-msgid "Remove printers"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder(ek) kikapcsolva"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
 #, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "{printer_name} will be removed until the next account sync."
-msgstr ""
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "A profil exportálása nem sikerült <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
 #, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
-msgstr ""
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "A profil exportálása nem sikerült <filename>{0}</filename>:Az író beépülő modul hibát jelez."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
 #, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "Are you sure you want to remove {printer_name} temporarily?"
-msgstr ""
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Profil exportálva ide: <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
-msgctxt "@title:window"
-msgid "Remove printers?"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Sikeres export"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
 #, python-brace-format
-msgctxt "@label"
-msgid ""
-"You are about to remove {0} printer from Cura. This action cannot be undone.\n"
-"Are you sure you want to continue?"
-msgid_plural ""
-"You are about to remove {0} printers from Cura. This action cannot be undone.\n"
-"Are you sure you want to continue?"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
-msgctxt "@label"
-msgid ""
-"You are about to remove all printers from Cura. This action cannot be undone.\n"
-"Are you sure you want to continue?"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr ""
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Sikertelen profil importálás <filename>{0}</filename>: {1} -ból"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA digitális eszközcsere"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Nem importálható a profil <filename>{0}</filename> -ból, mielőtt hozzá nem adunk egy nyomtatót."
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Bináris"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Nincs egyéni profil a <filename>{0}</filename> fájlban, amelyet importálni lehetne"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF beágyazott JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "A profil importálása nem sikerült <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford háromszög formátum"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Ez a <filename>{0}</filename> profil helytelen adatokat tartamaz, ezért nem importálható."
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Tömörített COLLADA digitális eszközcsere"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Nem importálható a profil <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:title"
-msgid "Model Errors"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "A {0} fájl nem tartalmaz érvényes profilt."
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Felület nézet"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "A(z) {0} profil ismeretlen fájltípusú vagy sérült."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Hiba a 3mf fájl írásakor."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Egyedi profil"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Hiányzik a profil minőségi típusa."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
-msgctxt "@error"
-msgid "There is no workspace yet to write. Please add a printer first."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF fájl"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura projekt 3MF fájl"
-
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitor"
-
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D-s modellsegéd"
-
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
 #, python-brace-format
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr ""
-"<p>Lehetséges, hogy egy vagy több 3D-s modellt nem lehet optimálisan kinyomtatni a modell mérete és az anyagkonfiguráció miatt:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Itt Megtudhatja, hogyan lehet a lehető legjobb nyomtatási minőséget és megbízhatóságot biztosítani.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Háló típus"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Tárgyak többszörözése és elhelyezése"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Normál mód"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Tárgyak elhelyezése"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Támaszként nyomtassa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Tárgy elhelyezése"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Az Ultimaker fiókkiszolgáló elérhetetlen."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
-msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
-msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Nincs olvasható válasz."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Beállítások kiválasztása"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "A modellek egyéni beállításainak kiválasztása"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Szűrés..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Kérjük, adja meg a szükséges jogosultságokat az alkalmazás engedélyezéséhez."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Mindent mutat"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Valami váratlan esemény történt a bejelentkezéskor, próbálkozzon újra."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura biztonsági mentések"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura verzió"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Gépek"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Alapanyagok"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profilok"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Beépülők"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Többet szeretnél?"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Biztonsági mentés most"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatikus biztonsági mentés"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Automatikusan létrehoz egy biztonsági mentést minden egyes nap, mikor a Cura indítva van."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Visszaállítás"
+msgid "Cura can't start"
+msgstr "A Cura nem tud elindulni"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Biztonsági mentés törlés"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Hoppá, az Ultimaker Cura olyan dolgokkal találkozott, amelyek hibásnak tűnnek.</p></b>\n"
+"                    <p>Az indítás során helyrehozhatatlan hibát tapasztaltunkEzt valószínűleg néhány helytelen konfigurációs fájl okozta. Javasoljuk, hogy biztonsági másolatból állítsa vissza a konfigurációt.</p>\n"
+"                    <p>A biztonsági mentések a konfigurációs mappában találhatók.</p>\n"
+"                    <p>Kérjük, küldje el nekünk ezt a hibajelentést a probléma megoldásához.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Biztosan szeretnéd törölni a biztonsági mentést? Ez nem vonható vissza."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
+msgctxt "@action:button"
+msgid "Send crash report to Ultimaker"
+msgstr "Hibajelentés küldése az Ultimaker -nek"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Helyreállítás biztonsági mentésből"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
+msgctxt "@action:button"
+msgid "Show detailed crash report"
+msgstr "Hibajelentés részletei"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "A biztonsági mentés helyreállítás előtt a Cura -t újra kell indítani.Bezárjuk most a Cura-t?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
+msgctxt "@action:button"
+msgid "Show configuration folder"
+msgstr "Konfigurációs mappa megnyitása"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "A Cura beállítások biztonsági mentése és szinkronizálása."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
+msgctxt "@action:button"
+msgid "Backup and Reset Configuration"
+msgstr "Konfiguráció biztonsági mentés és visszaállítás"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Bejelentkezés"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Összeomlás jelentés"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Biztonsági mentéseim"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Végzetes hiba történt Cura-ban. Kérjük, küld el nekünk az összeomlás jelentését, hogy javítani tudjuk a hibát.</p></b>\n"
+"            <p>Kérjük használd a \"Jelentés küldés\" gombot a hibajelentés postázásához,  így az automatikusan a szerverünkre kerül.</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Nincs egyetlen biztonsági mentésed sem. Használd a 'Biztonsági mentés' gombot, hogy létrehozz egyet."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Rendszer információ"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Az előnézeti szakaszban a látható biztonsági mentések száma 5 lehet.Ha szeretné látni a régebbieket, távolítson el egyet a láthatóak közül."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Ismeretlen"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Nyomtató beállítás"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Cura verzió"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Szélesség)"
+msgid "Cura language"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+msgid "OS language"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Mélység)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Felület"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Magasság)"
+msgid "Qt version"
+msgstr "Qt verzió"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Tárgyasztal alakja"
+msgid "PyQt version"
+msgstr "PyQt verzió"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origó középen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Heated bed"
-msgstr "Fűtött asztal"
+msgid "Not yet initialized<br/>"
+msgstr "Még nincs inicializálva<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Fűtött nyomtatási tér"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGL Verzió: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-kód illesztés"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL terjesztő: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Nyomtatófej beállítások"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Hibakövetés"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Naplók"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Jelentés küldés"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Győződj meg, hogy a nyomtató csatlakozása rendben van:\n"
+"- Ellenőrizd, hogy a nyomtató be van-e kapcsolva.\n"
+"- Ellenőrizd, hogy a nyomtató csatlakozik a hálózathoz\n"
+"- Ellenőrizd, hogy fel vagy-e jelentkezve a felhőbe."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
-msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Szán magasság"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Csatlakoztasd a nyomtatót a hálózathoz."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Extruderek száma"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Nézd meg az online felhasználói kézikönyvet"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
+msgctxt "@info"
+msgid "In order to monitor your print from Cura, please connect the printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-kód kezdés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "A modellek egyéni beállításainak kiválasztása"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-kód zárás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Szűrés..."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Fűvóka beállítások"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Mindent mutat"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
 msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Fúvóka méret"
+msgid "Mesh Type"
+msgstr "Háló típus"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Nyomtatószál átmérő"
+msgid "Normal model"
+msgstr "Normál mód"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Fúvóka X eltolás"
+msgid "Print as support"
+msgstr "Támaszként nyomtassa"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Fúvóka Y eltolás"
+msgid "Modify settings for overlaps"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Hűtőventilátorok száma"
+msgid "Don't support overlaps"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Extruder G-kód kezdés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Extruder G-kód zárás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Nyomtató"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "Beállítások kiválasztása"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Firmware frissítés"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "A firmware egy szoftver, ami közvetlenül a nyomtatón fut. Ez vezérli a léptető motorokat, szabályozza a hőmérsékleteket, és az egész nyomtató működését."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "A firmware a nyomtató része, így a használatba vételkor már a gépen található.Azonban készülnek belőle újabb verziók, amik esetleges hibákat szüntetnek meg, illetve egyéb új funkciókat biztosíthatnak."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Automatikus firmware frissítés"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Egyedi firmware feltöltése"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "A firmware feltöltés nem lehetséges, mert nincs a nyomtatóval kapcsolat."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "A firmware feltöltés nem lehetséges, mert ugyan a nyomtató kapcsolódik, de az nem támogatja a firmware frissítést."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Egyedi firmware kiválasztása"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Firmware frissítés"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "A firmware frissítése."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Firmware frissítés kész."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "A firmware frissítés meghiúsult ismeretlen hiba miatt."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "A firmware frissítés meghiúsult kommunikációs hiba miatt."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "A firmware frissítés meghiúsult input/output hiba miatt."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "A firmware frissítés meghiúsult, mert nem található a firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Projekt megnyitása"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Összegzés - Cura Project"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Nyomtató beállítások"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Hogyan lehet megoldani a gépet érintő konfliktust?"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Típus"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Nyomtató csoport"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Megszakítva"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profil beállítások"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Befejezve"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Hogyan lehet megoldani a profilt érintő konfliktust?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Előkészítés..."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Név"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Megszakítás..."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Nincs a profilban"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 felülírás"
-msgstr[1] "%1 felülírás"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Származék"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 felülírás"
-msgstr[1] "%1, %2 felülírás"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Alapanyag beállítások"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Hogyan lehet megoldani az alapanyaggal kapcsolatos konfliktust?"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Beállítások láthatósága"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mód"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Várakozás..."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Látható beállítások:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Várakozás"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 %2 -ből"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Folytatás..."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "A projekt betöltésekor minden modell törlődik a tárgyasztalról."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Beavatkozás szükséges"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Megnyitás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Befejezve %1 a %2 -ből"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Utó művelet beépülő"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
+msgctxt "@label link to Connect and Cloud interfaces"
+msgid "Manage printer"
+msgstr "Nyomtató kezelés"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Utó művelet szkript"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Adjon hozzá egy szkriptet"
+msgid "Glass"
+msgstr "Üveg"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
-msgctxt "@label"
-msgid "Settings"
-msgstr "Beállítások"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "A távoli nyomtatásisor kezeléshez kérjük frissítse a firmware-t."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
+msgctxt "@info"
+msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Kép konvertálás..."
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Az egyes pixelek legnagyobb távolsága \"Base.\""
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Magasság (mm)"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Az alap magassága a tárgyasztaltól mm -ben."
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Alap (mm)"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "A szélesség mm -ben a tárgyasztalon."
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Szélesség (mm)"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "A mélység mm-ben a tárgyasztalon"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Mélység (mm)"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "A litofánok esetében a sötét képpontoknak a vastagabb helyek felelnek meg.Ez azért van így, mert minél vastagabb a hely, annál kevesebb fényt enged át.A magassági térképeknél a világosabb képpontok magasabb szintnek felelnek meg, tehát a generált 3D modellnél ezeket figyelembe kell venni.Ez azt is jelenti, hogy általában a generált modell a tényleges kép negatívja kell, hogy legyen."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
+msgctxt "@label:status"
+msgid "Loading..."
+msgstr "Betöltés..."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "A sötétebb a magasabb"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
+msgctxt "@label:status"
+msgid "Unavailable"
+msgstr "Elérhetetlen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "A világosabb a magasabb"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
+msgctxt "@label:status"
+msgid "Unreachable"
+msgstr "Elérhetetlen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
+msgctxt "@label:status"
+msgid "Idle"
+msgstr "Készenlét"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+msgctxt "@label:status"
+msgid "Printing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
+msgctxt "@label"
+msgid "Untitled"
+msgstr "Felirat nélküli"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
+msgctxt "@label"
+msgid "Anonymous"
+msgstr "Névtelen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
+msgctxt "@label:status"
+msgid "Requires configuration changes"
+msgstr "A konfiguráció változtatásokat igényel"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "A kép simításának mértéke."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
+msgctxt "@action:button"
+msgid "Details"
+msgstr "Részletek"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Simítás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr "Konfiguráció változások"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+msgid "Override"
+msgstr "Felülírás"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Kérjük, válassza ki az Ultimaker Original eredeti frissítéseit"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatás szükséges:"
+msgstr[1] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatások szükségesek:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Fűthető tárgyasztal (eredeti vagy utólag épített)"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "A %1 nyomtató hozzá van rendelve a feladathoz, azonban az ismeretlen anyagot tartalmaz."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Tálca szintezés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
+msgstr "Változtasd meg az %1 anyagot %2 -ről %3 -ra."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Azért, hogy nyomtattandó testek megfelelően letapadjanak,  lehetőség van beállítani a nyomtatótálcát. Ha rákattint a 'Mozgás a következő pozícióba' gombra, a fej átmozgatható a különböző beállítási helyzetekbe."
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Töltsd be %3 -at %1 anyagként. (Ez nem felülbírálható)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Minden helyzetben helyezzen be egy darab papírt (A4) a fúvóka alá, és állítsa be a fej magasságát.A nyomtató tálca magassága akkor megfelelő, ha a papírt kissé megfogja a fúvóka vége."
+msgid "Change print core %1 from %2 to %3."
+msgstr "Cseréld a nyomtató magot %1 -ről %2 -re, %3 -hoz."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Tálca szintezés indítása"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
+msgctxt "@label"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Változtasd meg a tálcát %1 -re (Ez nem felülbírálható)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Mozgás a következő pozícióba"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
+msgctxt "@label"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "A felülbírálás a megadott beállításokat fogja használni a meglévő nyomtató konfigurációval, azonban ez eredménytelen nyomtatáshoz vezethet."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
+msgctxt "@label"
+msgid "Aluminum"
+msgstr "Alumínium"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "További információ a névtelen adatgyűjtésről"
+msgid "Print over network"
+msgstr "Nyomtatás hálózaton"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javítása érdekében. Az alábbiakban található egy példa az összes megosztott adatra:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Nyomtatás"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Nem szeretnék részt venni az adatgyűjtésben"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Nyomtató kiválasztás"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Anonim adatok küldésének engedélyezése"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
+msgctxt "@title:window"
+msgid "Connect to Networked Printer"
+msgstr "Csatlakozás hálózati nyomtatóhoz"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Áruház"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
+msgctxt "@label"
+msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
+msgstr "Ha hálózaton keresztül szeretnél közvetlenül nyomtatni, akkor győződj meg arról, hogy a nyomtató csatlakozik vezetékes, vagy vezeték nélküli hálózathoz. Ha nincs elérhető hálózat, akkor közvetlenül USB kapcsolaton keresztül is tudsz nyomtatni."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "A csomagok változásainak érvénybe lépése előtt újra kell indítania a Cura-t."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
+msgctxt "@label"
+msgid "Select your printer from the list below:"
+msgstr "Válaszd ki a nyomtatódat az alábbi listából:"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
+msgctxt "@action:button"
+msgid "Edit"
+msgstr "Szerkeszt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Telepítés"
+msgid "Remove"
+msgstr "Eltávolít"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
-msgid "Installed"
-msgstr "Telepítve"
+msgid "Refresh"
+msgstr "Frissít"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
-msgid "Premium"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr ""
+msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
+msgstr "Ha a nyomtatód nincs a listában, olvasd el a <a href='%1'>hálózati nyomtatás hibaelhárítási útmutatót</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
-msgid "Search materials"
-msgstr ""
+msgid "Type"
+msgstr "Típus"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
-msgid "Compatibility"
-msgstr "Kompatibilitás"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Gép"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Tárgyasztal"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Támasz"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Minőség"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Technikai adatlap"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Biztonsági adatlap"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Nyomtatási útmutató"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Weboldal"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Bejelentkezés</a> szükséges a telepítéshez vagy frissítéshez"
+msgid "Firmware version"
+msgstr "Frimware verzió"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Anyagtekercsek vásárlása</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+msgctxt "@label"
+msgid "Address"
+msgstr "Cím"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Frissítés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
+msgctxt "@label"
+msgid "This printer is not set up to host a group of printers."
+msgstr "Ez a nyomtató nem úgy van beállítva, hogy nyomtatócsoportot üzemeltessen."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Frissítés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
+msgctxt "@label"
+msgid "This printer is the host for a group of %1 printers."
+msgstr "Ez a nyomtató gazdagépe a %1 nyomtatócsoportnak."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Frissítve"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
+msgctxt "@label"
+msgid "The printer at this address has not yet responded."
+msgstr "A címen található nyomtató még nem válaszolt."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Vissza"
+msgid "Connect"
+msgstr "Csatlakozás"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Kiegészítők"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
+msgctxt "@title:window"
+msgid "Invalid IP address"
+msgstr "Hibás IP cím"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Alapanyagok"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+msgctxt "@text"
+msgid "Please enter a valid IP address."
+msgstr "Kérlek adj meg egy érvényes IP címet."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Telepítve"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
+msgctxt "@title:window"
+msgid "Printer Address"
+msgstr "Nyomtató cím"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Telepítés után újraindul"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Bejelentkezés</a> szükséges a frissítéshez"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Leminősítés"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Eltávolítás"
+msgid "Enter the IP address of your printer on the network."
+msgstr "Írd be a nyomtató hálózati IP címét."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Közösségi hozzájárulások"
+msgid "Unavailable printer"
+msgstr "Elérhetetlen nyomtató"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Közösségi bővítmények"
+msgid "First available"
+msgstr "Az első elérhető"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Általános anyagok"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Csomagok beolvasása..."
+msgid "Move to top"
+msgstr "Lépj a tetjére"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
-msgid "Website"
-msgstr "Weboldal"
+msgid "Delete"
+msgstr "Törlés"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
-msgid "Email"
-msgstr "Email"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr ""
+msgid "Resume"
+msgstr "Folytat"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
-msgid "Version"
-msgstr "Verzió"
+msgid "Pausing..."
+msgstr "Várakozás..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Utosó frissítés"
+msgid "Resuming..."
+msgstr "Folytatás..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
-msgid "Brand"
-msgstr "Márka"
+msgid "Pause"
+msgstr "Várakozás"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Letöltések"
+msgid "Aborting..."
+msgstr "Megszakítás..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Abort"
+msgstr "Megszakít"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to move %1 to the top of the queue?"
+msgstr "Biztos, hogy a %1 a nyomtatási sor elejére akarod mozgatni?"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+msgctxt "@window:title"
+msgid "Move print job to top"
+msgstr "Tedd a nyomtatási sor elejére"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to delete %1?"
+msgstr "Biztos, hogy törölni szeretnéd %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
+msgctxt "@window:title"
+msgid "Delete print job"
+msgstr "Nyomtatási feladat törlés"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to abort %1?"
+msgstr "Biztosan meg akarod szakítani %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Nem sikerült csatlakozni a Cura Package adatbázishoz. Kérjük, ellenőrizze a kapcsolatot."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
+msgctxt "@window:title"
+msgid "Abort print"
+msgstr "Nyomtatás megszakítás"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr ""
+msgid "Queued"
+msgstr "Nyomtatási Sor"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Következő"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Kezelés a böngészőben"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr ""
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Nincs a sorban nyomtatási feladat. Szeletelj és adj hozzá egy feladatot."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Eltávolítás jóváhagyása"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Távolítsd el a még használatban lévő anyagokat és / vagy profilokat.A megerősítés visszaállítja az alapanyagokat / profilokat alapértelmezett értékükre."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Alapanyagok"
+msgid "Print jobs"
+msgstr "Nyomtatások"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profilok"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Teljes nyomtatási idő"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Jóváhagy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Várakozom"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
 msgctxt "@label"
 msgid "Color scheme"
 msgstr "Szín séma"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
 msgctxt "@label:listbox"
 msgid "Material Color"
 msgstr "Alapanyag szín"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
 msgctxt "@label:listbox"
 msgid "Line Type"
 msgstr "Vonal típus"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
 msgctxt "@label:listbox"
 msgid "Speed"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
 msgctxt "@label:listbox"
 msgid "Layer Thickness"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
 msgctxt "@label:listbox"
 msgid "Line Width"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
 msgctxt "@label:listbox"
 msgid "Flow"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
 msgctxt "@label"
 msgid "Compatibility Mode"
 msgstr "Kompatibilis mód"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
 msgctxt "@label"
 msgid "Travels"
 msgstr "Átmozgás"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
 msgctxt "@label"
 msgid "Helpers"
 msgstr "Segítők"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
 msgctxt "@label"
 msgid "Shell"
 msgstr "Héj"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
 msgctxt "@label"
 msgid "Infill"
 msgstr "Kitöltés"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
 msgctxt "@label"
 msgid "Starts"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
 msgctxt "@label"
 msgid "Only Show Top Layers"
 msgstr "Csak a felső rétegek megjelenítése"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
 msgctxt "@label"
 msgid "Show 5 Detailed Layers On Top"
 msgstr "Mutasson 5 felső réteget részletesen"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
 msgctxt "@label"
 msgid "Top / Bottom"
 msgstr "Felső / Alsó"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
 msgctxt "@label"
 msgid "Inner Wall"
 msgstr "Belső fal"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
 msgctxt "@label"
 msgid "min"
 msgstr "min"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
 msgctxt "@label"
 msgid "max"
 msgstr "max"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
-msgstr "Nyomtató kezelés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-msgctxt "@label"
-msgid "Glass"
-msgstr "Üveg"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Magasság (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "A távoli nyomtatásisor kezeléshez kérjük frissítse a firmware-t."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Az egyes pixelek legnagyobb távolsága \"Base.\""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
-msgctxt "@info"
-msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Alap (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Az alap magassága a tárgyasztaltól mm -ben."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Szélesség (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
-msgctxt "@label:status"
-msgid "Loading..."
-msgstr "Betöltés..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Mélység (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
-msgctxt "@label:status"
-msgid "Unavailable"
-msgstr "Elérhetetlen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "A mélység mm-ben a tárgyasztalon"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
-msgctxt "@label:status"
-msgid "Unreachable"
-msgstr "Elérhetetlen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "A sötétebb a magasabb"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
-msgctxt "@label:status"
-msgid "Idle"
-msgstr "Készenlét"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "A világosabb a magasabb"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Előkészítés..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "A litofánok esetében a sötét képpontoknak a vastagabb helyek felelnek meg.Ez azért van így, mert minél vastagabb a hely, annál kevesebb fényt enged át.A magassági térképeknél a világosabb képpontok magasabb szintnek felelnek meg, tehát a generált 3D modellnél ezeket figyelembe kell venni.Ez azt is jelenti, hogy általában a generált modell a tényleges kép negatívja kell, hogy legyen."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
-msgctxt "@label:status"
-msgid "Printing"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
-msgctxt "@label"
-msgid "Untitled"
-msgstr "Felirat nélküli"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
-msgctxt "@label"
-msgid "Anonymous"
-msgstr "Névtelen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
-msgctxt "@label:status"
-msgid "Requires configuration changes"
-msgstr "A konfiguráció változtatásokat igényel"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Simítás"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "A kép simításának mértéke."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Details"
-msgstr "Részletek"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Elérhetetlen nyomtató"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Projekt megnyitása"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Az első elérhető"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Nyomtatási Sor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Kezelés a böngészőben"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Összegzés - Cura Project"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Nincs a sorban nyomtatási feladat. Szeletelj és adj hozzá egy feladatot."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Hogyan lehet megoldani a gépet érintő konfliktust?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Nyomtatások"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Nyomtató beállítások"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Teljes nyomtatási idő"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Típus"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Várakozom"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Nyomtató csoport"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Nyomtatás hálózaton"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Hogyan lehet megoldani a profilt érintő konfliktust?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Nyomtatás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profil beállítások"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Nyomtató kiválasztás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Név"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Konfiguráció változások"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Nincs a profilban"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 felülírás"
+msgstr[1] "%1 felülírás"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Származék"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 felülírás"
+msgstr[1] "%1, %2 felülírás"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Hogyan lehet megoldani az alapanyaggal kapcsolatos konfliktust?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Alapanyag beállítások"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Beállítások láthatósága"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mód"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Látható beállítások:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 %2 -ből"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "A projekt betöltésekor minden modell törlődik a tárgyasztalról."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Felülírás"
+msgid "Open"
+msgstr "Megnyitás"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatás szükséges:"
-msgstr[1] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatások szükségesek:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+msgctxt "@button"
+msgid "Want more?"
+msgstr "Többet szeretnél?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "A %1 nyomtató hozzá van rendelve a feladathoz, azonban az ismeretlen anyagot tartalmaz."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
+msgstr "Biztonsági mentés most"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Változtasd meg az %1 anyagot %2 -ről %3 -ra."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatikus biztonsági mentés"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Töltsd be %3 -at %1 anyagként. (Ez nem felülbírálható)."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Automatikusan létrehoz egy biztonsági mentést minden egyes nap, mikor a Cura indítva van."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Cseréld a nyomtató magot %1 -ről %2 -re, %3 -hoz."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura verzió"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Változtasd meg a tálcát %1 -re (Ez nem felülbírálható)."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Gépek"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "A felülbírálás a megadott beállításokat fogja használni a meglévő nyomtató konfigurációval, azonban ez eredménytelen nyomtatáshoz vezethet."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Alapanyagok"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
-msgctxt "@label"
-msgid "Aluminum"
-msgstr "Alumínium"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profilok"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Befejezve"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Beépülők"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Megszakítás..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Visszaállítás"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Megszakítva"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Biztonsági mentés törlés"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Biztosan szeretnéd törölni a biztonsági mentést? Ez nem vonható vissza."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Várakozás..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Helyreállítás biztonsági mentésből"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Várakozás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "A biztonsági mentés helyreállítás előtt a Cura -t újra kell indítani.Bezárjuk most a Cura-t?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Folytatás..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "A Cura beállítások biztonsági mentése és szinkronizálása."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Beavatkozás szükséges"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Bejelentkezés"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Befejezve %1 a %2 -ből"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Biztonsági mentéseim"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Nincs egyetlen biztonsági mentésed sem. Használd a 'Biztonsági mentés' gombot, hogy létrehozz egyet."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Az előnézeti szakaszban a látható biztonsági mentések száma 5 lehet.Ha szeretné látni a régebbieket, távolítson el egyet a láthatóak közül."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
 msgctxt "@title:window"
-msgid "Connect to Networked Printer"
-msgstr "Csatlakozás hálózati nyomtatóhoz"
+msgid "Cura Backups"
+msgstr "Cura biztonsági mentések"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
-msgstr "Ha hálózaton keresztül szeretnél közvetlenül nyomtatni, akkor győződj meg arról, hogy a nyomtató csatlakozik vezetékes, vagy vezeték nélküli hálózathoz. Ha nincs elérhető hálózat, akkor közvetlenül USB kapcsolaton keresztül is tudsz nyomtatni."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "További információ a névtelen adatgyűjtésről"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid "Select your printer from the list below:"
-msgstr "Válaszd ki a nyomtatódat az alábbi listából:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javítása érdekében. Az alábbiakban található egy példa az összes megosztott adatra:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
-msgctxt "@action:button"
-msgid "Edit"
-msgstr "Szerkeszt"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Nem szeretnék részt venni az adatgyűjtésben"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
-msgctxt "@action:button"
-msgid "Remove"
-msgstr "Eltávolít"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Anonim adatok küldésének engedélyezése"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
-msgctxt "@action:button"
-msgid "Refresh"
-msgstr "Frissít"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Utó művelet beépülő"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
-msgstr "Ha a nyomtatód nincs a listában, olvasd el a <a href='%1'>hálózati nyomtatás hibaelhárítási útmutatót</a>"
+msgid "Post Processing Scripts"
+msgstr "Utó művelet szkript"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
-msgctxt "@label"
-msgid "Type"
-msgstr "Típus"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Adjon hozzá egy szkriptet"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Firmware version"
-msgstr "Frimware verzió"
+msgid "Settings"
+msgstr "Beállítások"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Address"
-msgstr "Cím"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Kérjük, válassza ki az Ultimaker Original eredeti frissítéseit"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
-msgstr "Ez a nyomtató nem úgy van beállítva, hogy nyomtatócsoportot üzemeltessen."
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Fűthető tárgyasztal (eredeti vagy utólag épített)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Tálca szintezés"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
-msgstr "Ez a nyomtató gazdagépe a %1 nyomtatócsoportnak."
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Azért, hogy nyomtattandó testek megfelelően letapadjanak,  lehetőség van beállítani a nyomtatótálcát. Ha rákattint a 'Mozgás a következő pozícióba' gombra, a fej átmozgatható a különböző beállítási helyzetekbe."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The printer at this address has not yet responded."
-msgstr "A címen található nyomtató még nem válaszolt."
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Minden helyzetben helyezzen be egy darab papírt (A4) a fúvóka alá, és állítsa be a fej magasságát.A nyomtató tálca magassága akkor megfelelő, ha a papírt kissé megfogja a fúvóka vége."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
 msgctxt "@action:button"
-msgid "Connect"
-msgstr "Csatlakozás"
+msgid "Start Build Plate Leveling"
+msgstr "Tálca szintezés indítása"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
-msgctxt "@title:window"
-msgid "Invalid IP address"
-msgstr "Hibás IP cím"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Mozgás a következő pozícióba"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
-msgctxt "@text"
-msgid "Please enter a valid IP address."
-msgstr "Kérlek adj meg egy érvényes IP címet."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
-msgctxt "@title:window"
-msgid "Printer Address"
-msgstr "Nyomtató cím"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
-msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
-msgstr "Írd be a nyomtató hálózati IP címét."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
-msgctxt "@label"
-msgid "Move to top"
-msgstr "Lépj a tetjére"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
-msgctxt "@label"
-msgid "Delete"
-msgstr "Törlés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
+msgctxt "@button"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
-msgctxt "@label"
-msgid "Resume"
-msgstr "Folytat"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
-msgctxt "@label"
-msgid "Pausing..."
-msgstr "Várakozás..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
-msgctxt "@label"
-msgid "Resuming..."
-msgstr "Folytatás..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
+msgctxt "@button"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
-msgctxt "@label"
-msgid "Pause"
-msgstr "Várakozás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Aborting..."
-msgstr "Megszakítás..."
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
-msgctxt "@label"
-msgid "Abort"
-msgstr "Megszakít"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
-msgstr "Biztos, hogy a %1 a nyomtatási sor elejére akarod mozgatni?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
-msgctxt "@window:title"
-msgid "Move print job to top"
-msgstr "Tedd a nyomtatási sor elejére"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
+msgctxt "@button"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
-msgstr "Biztos, hogy törölni szeretnéd %1?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
+msgctxt "@button"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
-msgctxt "@window:title"
-msgid "Delete print job"
-msgstr "Nyomtatási feladat törlés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
-msgstr "Biztosan meg akarod szakítani %1?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
+msgctxt "@button"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
-msgctxt "@window:title"
-msgid "Abort print"
-msgstr "Nyomtatás megszakítás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"Győződj meg, hogy a nyomtató csatlakozása rendben van:\n"
-"- Ellenőrizd, hogy a nyomtató be van-e kapcsolva.\n"
-"- Ellenőrizd, hogy a nyomtató csatlakozik a hálózathoz\n"
-"- Ellenőrizd, hogy fel vagy-e jelentkezve a felhőbe."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Csatlakoztasd a nyomtatót a hálózathoz."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Nézd meg az online felhasználói kézikönyvet"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
+msgctxt "@text"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Néhány dolog problémát jelenthet ebben a nyomtatásban.Kattintson ide a beállítási tippek megtekintéséhez."
+msgid "Manage packages"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Objektum lista"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Piactér"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Fájl"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "S&zerkesztés"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Nézet"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Beállítások"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "K&iterjesztések"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&referenciák"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Segítség"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Új projekt"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Biztos benne, hogy új projektet akar kezdeni? Ez törli az alapsíkot és az összes nem mentett beállítást."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Szeletelés..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Nem szeletelhető"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
+msgctxt "@text"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Processing"
-msgstr "Feldolgozás"
+msgid "Accept"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
 msgctxt "@button"
-msgid "Slice"
-msgstr "Szeletelés"
+msgid "Decline"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Szeletelés indítása"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Elvet"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
+msgctxt "@text"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Nyomtató"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Fűvóka beállítások"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Időbecslés"
+msgid "Nozzle size"
+msgstr "Fúvóka méret"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Anyag becslés"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Nyomtatószál átmérő"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Fúvóka X eltolás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Nincs időbecslés"
+msgid "Nozzle offset Y"
+msgstr "Fúvóka Y eltolás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Nincs költségbecslés"
+msgid "Cooling Fan Number"
+msgstr "Hűtőventilátorok száma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Előnézet"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Extruder G-kód kezdés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Extruder G-kód zárás"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Nyomtató beállítás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add a printer"
-msgstr "Nyomtató hozzáadása"
+msgid "X (Width)"
+msgstr "X (Szélesség)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Hálózati nyomtató hozzáadása"
+msgid "Y (Depth)"
+msgstr "Y (Mélység)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Helyi nyomtató hozzáadása"
+msgid "Z (Height)"
+msgstr "Z (Magasság)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr ""
+msgid "Build plate shape"
+msgstr "Tárgyasztal alakja"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr ""
+msgid "Origin at center"
+msgstr "Origó középen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr ""
+msgid "Heated bed"
+msgstr "Fűtött asztal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr ""
+msgid "Heated build volume"
+msgstr "Fűtött nyomtatási tér"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-kód illesztés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Nyomtatófej beállítások"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Nyomtató hozzáadása IP címmel"
+msgid "X min"
+msgstr "X min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Hozzáad"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Nem sikerült csatlakozni az eszközhöz."
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr ""
+msgid "Gantry Height"
+msgstr "Szán magasság"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
 msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Az ezen a címen található nyomtató még nem válaszolt."
+msgid "Number of Extruders"
+msgstr "Extruderek száma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
 msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Ezt a nyomtatót nem lehet hozzáadni, mert ismeretlen a nyomtató vagy nem egy csoport tagja."
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
-msgctxt "@button"
-msgid "Back"
-msgstr "Vissza"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-kód kezdés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
-msgctxt "@button"
-msgid "Connect"
-msgstr "Csatlakozás"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-kód zárás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Felhasználói Szerződés"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Elutasítás és bezárás"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Üdvözöljük az Ultimaker Cura-ban"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
-msgctxt "@button"
-msgid "Get started"
-msgstr "Kezdj hozzá"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
-msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
-msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
-msgctxt "@button"
-msgid "Skip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
-msgctxt "@text"
-msgid "Create a free Ultimaker Account"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
-msgctxt "@label"
-msgid "Manufacturer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
-msgctxt "@label"
-msgid "Profile author"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Kiválasztott modell nyomtatása %1"
+msgstr[1] "Kiválasztott modellek nyomtatása %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Beállítások"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Új projekt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Biztos benne, hogy új projektet akar kezdeni? Ez törli az alapsíkot és az összes nem mentett beállítást."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Piactér"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Nyomtató név"
+msgid "Build plate"
+msgstr "Tárgyasztal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "A fűthető ágy beállítható célhőmérséklete. Ha beállítjuk ezt az értéket a tálca elkezd erre a hőmérsékletre melegedni, vagy éppen lehűlni. Ha az érték 0 a tálcafűtés kikapcsol."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "A fűthető ágy aktuális hőmérséklete."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "A tálca előmelegítési hőmérséklete."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Elvet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Előfűtés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "A fűthető tálcát, a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "A nyomtató nincs csatlakoztatva."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "A hálózaton nem található nyomtató."
+msgid "Printer control"
+msgstr "Nyomtató vezérlés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Frissítés"
+msgid "Jog Position"
+msgstr "Léptetőgomb pozíció"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Nyomtató hozzáadása IP címmel"
+msgid "X/Y"
+msgstr "X/Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr ""
+msgid "Z"
+msgstr "Z"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Hibaelhárítás"
+msgid "Jog Distance"
+msgstr "Léptetőgomb távolság"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Segítsen nekünk az Ultimaker Cura fejlesztésében"
+msgid "Send G-code"
+msgstr "G-kód küldés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javításának érdekében, ideértve:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Küldjön egy egyéni G-kód parancsot a csatlakoztatott nyomtatóra. A parancs elküldéséhez nyomja meg az 'enter' gombot."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Géptípusok"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Extruder"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Anyagfelhasználás"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "A nyomtatófej célhőmérséklete. A fűtőblokk hőmérséklete a beállított értékre fog melegedni, vagy éppen hűlni. Ha ez az érték 0, akkor a fejfűtés ki fog kapcsolni."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Szeletek száma"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Ennek a fejnek a jelenlegi hőmérséklete."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Nyomtatási beállítások"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "A nyomtatófej előmelegítési hőmérséklete."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Az Ultimaker Cura által gyűjtött adatok nem tartalmaznak személyes információt."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "A nyomtatófejet a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Több információ"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Az alapanyag színe ennél az extrudernél."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
-msgctxt "@label"
-msgid "What's New"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Az alapanyag ebben az extruderben."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Üres"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "A fúvóka be van építve az extruderbe."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
-msgctxt "@label"
-msgid "Release Notes"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Projekt fájl megnyitása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Ez egy Cura projekt fájl. Szeretné projektként megnyitni, vagy importálni a modelleket?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Emlékezzen a választásra"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Megnyitás projektként"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modellek importálása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Projekt mentése"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Extruder %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & alapanyag"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Alapanyag"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Ne mutassa újra a projekt összegzését mentés közben"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Mentés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Fájl(ok) megnyitása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Egy vagy több projekt fájlt találtunk a kiválasztott fájlokban.Egyszerre csak egy projekt fájlt nyithat meg. Javasoljuk, hogy csak a modelleket importálja ezekből a fájlokból. Szeretné folytatni?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Importáljunk mindent modellekként"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "verzió: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Teljes körű megoldás az olvadószálas 3D-s nyomtatáshoz."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
 "Cura proudly uses the following open source projects:"
 msgstr "A Cura-t az Ultimaker B.V fejlesztette ki a közösséggel együttműködésben. A Cura büszkén használja a következő nyílt forráskódú projekteket:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafikai felhasználói interfész"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Alkalmazás keretrendszer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-kód generátor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Folyamatközi kommunikációs könyvtár"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programozási nyelv"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI keretrendszer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI keretrendszer függőségek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ függőségek könyvtár"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Adat csere formátum"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Támogató könyvtár a tudományos számítások számára"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Támogató könyvtár a gyorsabb matematikához"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Támogató könyvtár az STL fájlok kezeléséhez"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Támogató könyvtár a sík objektumok kezeléséhez"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Támogató könyvtár a háromszög hálók kezeléséhez"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Támogató könyvtár a 3MF fájlok kezeléséhez"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Támogató könyvtár a fájl metaadatokhoz és továbbításához"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Soros kommunikációs könyvtár"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf felderítő könyvtár"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Poligon daraboló könyvtár"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Betűtípus"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG ikonok"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux kereszt-disztribúciós alkalmazás telepítése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Fájl(ok) megnyitása"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Egy vagy több projekt fájlt találtunk a kiválasztott fájlokban.Egyszerre csak egy projekt fájlt nyithat meg. Javasoljuk, hogy csak a modelleket importálja ezekből a fájlokból. Szeretné folytatni?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Importáljunk mindent modellekként"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Projekt mentése"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Extruder %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & alapanyag"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Alapanyag"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Ne mutassa újra a projekt összegzését mentés közben"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Mentés"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Változtatások megtartása vagy eldobása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Profil beállítások"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Mindig kérdezz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Eldobás és ne kérdezze újra"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Megtartás és ne kérdezze újra"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Projekt fájl megnyitása"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Ez egy Cura projekt fájl. Szeretné projektként megnyitni, vagy importálni a modelleket?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Emlékezzen a választásra"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Legutóbbi fájlok"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Megnyitás projektként"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Láthatósági beállítások"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modellek importálása"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Beállítások láthatóságának kezelése..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Alapanyag"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Beállítva aktív extruderként"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Extruder engedélyezése"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Extruder letiltása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Alapanyag"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Kedvencek"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Generikus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Segítség"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Fájl"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Kiválasztás exportálása..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&referenciák"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "S&zerkesztés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Nyomtató"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Hálózati nyomtatók"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Helyi nyomtatók"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "K&iterjesztések"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfigurációk"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Aktív nyomtatás"
+msgid "Loading available configurations from the printer..."
+msgstr "Az elérhető konfigurációk betöltése a nyomtatóról..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Feladat név"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "A konfiguráció nem elérhető, mert nincs kapcsolat a a nyomtatóval."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Nyomtatási idő"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Ez a konfiguráció nem érhető el, mert a(z) %1 nem azonosítható. Kérjük, látogasson el a %2 webhelyre a megfelelő anyagprofil letöltéséhez."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Becsült hátralévő idő"
+msgid "Marketplace"
+msgstr "Piactér"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Konfiguráció kiválasztása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfigurációk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Nyomtató hozzáadása"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Egyéni"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Nyomtatók kezelése"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Nyomtató"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Csatlakoztatott nyomtatók"
+msgid "Enabled"
+msgstr "Bekapcsolt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Előre beállított nyomtatók"
+msgid "Material"
+msgstr "Alapanyag"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Nyomtatási beállítások"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Használj ragasztót a jobb tapadás érdekében, ennél az alapanyag kombinációnál."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "A nyomtatás beállítása letiltva. A G-kód fájl nem módosítható."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Kiválasztott modell nyomtatása:"
+msgstr[1] "Kiválasztott modellek nyomtatása:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Kiválasztott modell sokszorozása"
+msgstr[1] "Kiválasztott modellek sokszorozása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
+msgid "Number of Copies"
+msgstr "Másolatok száma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Nézet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Kamera helyzet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Kamera nézet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspektívikus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Merőleges"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Nézet típus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Néhány beállított vagy felülbírált érték eltérő, a profilban tárolt értéktől. \n"
-"\n"
-"Kattints, hogy megnyisd a profil menedzsert."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "A jelenlegi változások elvetése"
+msgid "Sign in"
+msgstr "Bejelentkezés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Ajánlott"
+msgid "Ultimaker Account"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Egyéni"
+msgid "Sign Out"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Szeletelés..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Nem szeletelhető"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Feldolgozás"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Szeletelés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Szeletelés indítása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Elvet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Időbecslés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Anyag becslés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Nincs időbecslés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Nincs költségbecslés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Előnézet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Ez a csomag újraindítás után fog települni."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Általános"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Beállítások"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Nyomtatók"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Alapanyagok"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profilok"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Csomag telepítése"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Fájl(ok) megnyitása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "A kiválasztott fájlok között több G-kód fájl is található.Egyszerre csak egy G-kód fájlt nyithat meg, ezért csak egy ilyen fájlt válasszon ki."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Nyomtató hozzáadása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Újdonságok"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Be"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Ki"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Tapasztalati"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Nyomtatási beállítások"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "A nyomtatás beállítása letiltva. A G-kód fájl nem módosítható."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Ajánlott"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Egyéni"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profilok"
+msgid "Gradual infill"
+msgstr "Fokozatos kitöltés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Megváltoztattál néhány profilbeállítást. Ha ezeket szeretnéd folyamatosan megtartani, akkor válaszd az 'Egyéni mód' -ot."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "A fokozatos kitöltés folyamatosan növeli a kitöltés mennyiségét, ahogy közeledik a tárgy teteje felé."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Támasz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "A támasz létrehozása segíti a modell kinyúló részeinek hibátlan nyomatását. Támasz nélkül, ezek a részek összeomlanak, és nem lehetséges a hibátlan nyomtatás."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Fokozatos kitöltés"
+msgid "Profiles"
+msgstr "Profilok"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "A fokozatos kitöltés folyamatosan növeli a kitöltés mennyiségét, ahogy közeledik a tárgy teteje felé."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Megváltoztattál néhány profilbeállítást. Ha ezeket szeretnéd folyamatosan megtartani, akkor válaszd az 'Egyéni mód' -ot."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Letapadás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Engedélyezze a peremet, vagy az aláúsztatást. Ez létre fog hozni a test szélén illetve az alján egy olyan részt, ami segíti a letapadást, viszont nyomtatás után ezek könnyen eltávolíthatóak a testről."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Hálózati nyomtatók"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "A jelenlegi változások elvetése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Helyi nyomtatók"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Alapanyag"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Néhány beállított vagy felülbírált érték eltérő, a profilban tárolt értéktől. \n"
+"\n"
+"Kattints, hogy megnyisd a profil menedzsert."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Kedvencek"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Beállítás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Generikus"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Kiválasztott modell nyomtatása:"
-msgstr[1] "Kiválasztott modellek nyomtatása:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Jelenlegi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Kiválasztott modell sokszorozása"
-msgstr[1] "Kiválasztott modellek sokszorozása"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Másolatok száma"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Láthatóság beállítása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Kiválasztás exportálása..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Mindent ellenőrizni"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfigurációk"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Egyéni"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktivál"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Átnevezés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Új átmérő megerősítése"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Az új nyomtatószál átmérő %1 mm -re lett beállítva. Ez nem kompatibilis a jelenlegi extruderrel. Biztos, hogy így folytatod?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Nyomtató"
+msgid "Display Name"
+msgstr "Megjelenítendő név"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Bekapcsolt"
+msgid "Brand"
+msgstr "Márka"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Alapanyag"
+msgid "Material Type"
+msgstr "Alapanyag típus"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Használj ragasztót a jobb tapadás érdekében, ennél az alapanyag kombinációnál."
+msgid "Color"
+msgstr "Szín"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Tulajdonságok"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Konfiguráció kiválasztása"
+msgid "Density"
+msgstr "Sűrűség"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfigurációk"
+msgid "Diameter"
+msgstr "Átmérő"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Az elérhető konfigurációk betöltése a nyomtatóról..."
+msgid "Filament Cost"
+msgstr "Nyomtatószál költség"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "A konfiguráció nem elérhető, mert nincs kapcsolat a a nyomtatóval."
+msgid "Filament weight"
+msgstr "Nyomtatószál súly"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Ez a konfiguráció nem érhető el, mert a(z) %1 nem azonosítható. Kérjük, látogasson el a %2 webhelyre a megfelelő anyagprofil letöltéséhez."
+msgid "Filament length"
+msgstr "Nyomtatószál hossz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Piactér"
+msgid "Cost per Meter"
+msgstr "Költség / méter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Ez az anyag kapcsolódik% 1 -hez és osztja néhány tulajdonságát."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Alapanyag leválasztása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Leírás"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Tapadási információ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Információ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Nyomtató"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Alapanyag"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Beállítva aktív extruderként"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Extruder engedélyezése"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Extruder letiltása"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Legutóbbi fájlok"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Láthatósági beállítások"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Beállítások láthatóságának kezelése..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Kamera helyzet"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Kamera nézet"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektívikus"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Merőleges"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Tárgyasztal"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Nézet típus"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profilok"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktivál"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Létrehozás"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Vissza"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Másolás"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Átnevezés"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Import"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Export"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profil készítés"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Adjon nevet ehhez a profilhoz."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Másolat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profil másolása"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Export"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Eltávolítás megerősítése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Biztosan el akarod távolítani %1 -et? Ez nem vonható vissza!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profil átnevezés"
+msgid "Import Material"
+msgstr "Alapanyag importálás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profil importálás"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Sikeres alapanyag import <filename>%1</filename>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Nem sikerült importálni az alapanyagot <filename>%1</filename>: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profil exportálás"
+msgid "Export Material"
+msgstr "Alapanyag export"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Nyomtató: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Sikertelen alapanyag export <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Sikeres alapanyag export <filename>%1</filename> -ba"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Frissítse a profilt az aktuális beállításokkal/felülbírálásokkal"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Ez a profil a nyomtató által megadott alapértelmezéseket használja, tehát az alábbi listában nincs egyetlen beállítás módosítás sem."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Az Ön aktuális beállításai megegyeznek a kiválasztott profillal."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Általános beállítások"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Általános"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profil készítés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Adjon nevet ehhez a profilhoz."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profil exportálás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profil másolása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profil átnevezés"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profil importálás"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interfész"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Pénznem:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Téma:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "A módosítások érvénybe lépéséhez újra kell indítania az alkalmazást."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Automatikus újraszeletelés, ha a beállítások megváltoznak."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatikus szeletelés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "A nézetablak viselkedése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Jelölje meg pirossal azokat a területeket, amiket szükséges alátámasztani.Ha ezeket a részeket nem támasztjuk alá, a nyomtatás nem lesz hibátlan."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Túlnyúlás kijelzése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "A kamerát úgy mozgatja, hogy a modell kiválasztásakor, az a nézet középpontjában legyen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Kamera középre, mikor az elem ki van választva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Megfordítsuk-e az alapértelmezett Zoom viselkedését?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Fordítsa meg a kamera zoom irányát."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "A nagyítás az egér mozgatásának irányában mozogjon?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Az egér felé történő nagyítás ortográfiai szempontból nem támogatott."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Nagyítás az egér mozgás irányában"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Az alapsíkon lévő modelleket elmozgassuk úgy, hogy ne keresztezzék egymást?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "A modellek egymástól való távtartásának biztosítása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "A modelleket mozgatni kell lefelé, hogy érintsék a tárgyasztalt?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Modellek automatikus tárgyasztalra illesztése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Figyelmeztető üzenet megjelenítése g-kód olvasóban."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Figyelmeztető üzenet a g-code olvasóban"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Kényszerítsük a réteget kompatibilitási módba ?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "A rétegnézet kompatibilis módjának kényszerítése (újraindítás szükséges)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Milyen fípusú fényképezőgépet használunk?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Perspetívikus"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Merőleges"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Fájlok megnyitása és mentése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "A modelleket átméretezzük a maximális építési méretre, ha azok túl nagyok?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Nagy modellek átméretezése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Egy adott modell rendkívül kicsinek tűnhet, ha mértékegysége például méterben van, nem pedig milliméterben. Ezeket a modelleket átméretezzük?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Extrém kicsi modellek átméretezése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Betöltés után a modellek legyenek kiválasztva?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Modell kiválasztása betöltés után"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "A nyomtató nevét, mint előtagot, hozzáadjuk a nyomtatási feladat nevéhez?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Gépnév előtagként a feladatnévben"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Mutassuk az összegzést a projekt mentésekor?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Összegzés megjelenítése projekt mentésekor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Mindig kérdezz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Projektként való megnyitás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Importálja a modelleket"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Ha módosított egy profilt, és váltott egy másikra, akkor megjelenik egy párbeszédpanel, amelyben megkérdezi, hogy meg kívánja-e tartani a módosításokat, vagy nem. Vagy választhat egy alapértelmezett viselkedést, és soha többé nem jeleníti meg ezt a párbeszédablakot."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Alapértelmezett viselkedés a megváltozott beállítási értékeknél, ha másik profilra vált: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Megváltozott beállítások elvetése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Megváltozott beállítások alkalmazása az új profilba"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Magán"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Elküldjük a nyomtatott adatokat név nélkül az Ultimaker-nek?Semmilyen személyes infromáció, IP cím vagy azonosító nem kerül elküldésre."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Név nélküli információ küldés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Több információ"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "A Cura-nak ellenőriznie kell-e a frissítéseket a program indításakor?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Keressen frissítéseket az induláskor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Információ"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Nyomtató hozzáadása IP címmel"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Új átmérő megerősítése"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Az új nyomtatószál átmérő %1 mm -re lett beállítva. Ez nem kompatibilis a jelenlegi extruderrel. Biztos, hogy így folytatod?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Hozzáad"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Megjelenítendő név"
+msgid "Could not connect to device."
+msgstr "Nem sikerült csatlakozni az eszközhöz."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Alapanyag típus"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Szín"
+msgid "The printer at this address has not responded yet."
+msgstr "Az ezen a címen található nyomtató még nem válaszolt."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Tulajdonságok"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Ezt a nyomtatót nem lehet hozzáadni, mert ismeretlen a nyomtató vagy nem egy csoport tagja."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Sűrűség"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Csatlakozás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Átmérő"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Nyomtatószál költség"
+msgid "User Agreement"
+msgstr "Felhasználói Szerződés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Nyomtatószál súly"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Elfogadás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Nyomtatószál hossz"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Elutasítás és bezárás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Költség / méter"
+msgid "What's New"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
-msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Ez az anyag kapcsolódik% 1 -hez és osztja néhány tulajdonságát."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Következő"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Alapanyag leválasztása"
+msgid "Add a Cloud printer"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Description"
-msgstr "Leírás"
+msgid "Waiting for Cloud response"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Tapadási információ"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Létrehoz"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Másolat"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
+msgid "No printers found in your account?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Nyomtató"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Alapanyag importálás"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Nem sikerült importálni az alapanyagot <filename>%1</filename>: <message>%2</message>"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Sikeres alapanyag import <filename>%1</filename>"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Alapanyag export"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Sikertelen alapanyag export <filename>%1</filename>: <message>%2</message>"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Sikeres alapanyag export <filename>%1</filename> -ba"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
 msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgid "Backup and sync your material settings and plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
 msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
+msgid "Skip"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Üdvözöljük az Ultimaker Cura-ban"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
 msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
 msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr ""
+msgid "Get started"
+msgstr "Kezdj hozzá"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Üres"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
-msgid "Troubleshooting"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nyomtató név"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgid "Please name your printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Nyomtató hozzáadása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Hálózati nyomtató hozzáadása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Helyi nyomtató hozzáadása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "A hálózaton nem található nyomtató."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Frissítés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Nyomtató hozzáadása IP címmel"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
-msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Hibaelhárítás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Segítsen nekünk az Ultimaker Cura fejlesztésében"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javításának érdekében, ideértve:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Géptípusok"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
 msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr ""
+msgid "Material usage"
+msgstr "Anyagfelhasználás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
 msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr ""
+msgid "Number of slices"
+msgstr "Szeletek száma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgid "Print settings"
+msgstr "Nyomtatási beállítások"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Az Ultimaker Cura által gyűjtött adatok nem tartalmaznak személyes információt."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Több információ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Objektum lista"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Láthatóság beállítása"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Mindent ellenőrizni"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Csatlakoztatott nyomtatók"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Nyomtatók"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Előre beállított nyomtatók"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Számított"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Beállítás"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Jelenlegi"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Egység"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Nyomtató hozzáadása"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Nyomtatók kezelése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Névtelen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Nincs nyomtatóhoz csatlakoztatva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "A nyomtató nem fogadja a parancsokat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "Karbantartás alatt. Ellenőrizze a nyomtatót"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Elveszett a kapcsolat a nyomtatóval"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Nyomtatás..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Felfüggsztve"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Előkészítés..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Távolítsa el a tárgyat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Nyomtatás megszakítás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Biztosan meg akarod szakítani a nyomtatást?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Kiválasztott modell nyomtatása %1"
-msgstr[1] "Kiválasztott modellek nyomtatása %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
 msgstr ""
+"Egyes beállítások eltérő értéken vannak a normál, kalkulált értékektől.\n"
+"\n"
+"Kattints, hogy ezek a beállítások láthatók legyenek."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Értékek másolása minden extruderre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Minden változott érték másolása minden extruderre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Beállítás elrejtése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Ne jelenítsd meg ezt a beállítást"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Nyomtató vezérlés"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Beállítás látható marad"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
-msgctxt "@label"
-msgid "Jog Position"
-msgstr "Léptetőgomb pozíció"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Beállítások láthatóságának beállítása..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Ezt a beállítást nem használjuk, mert minden ezen beállítással befolyásolt egyéb beállítás értéke felül van bírálva."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Befolyásolások"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
-msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Léptetőgomb távolság"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Befolyásolja"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "G-kód küldés"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Küldjön egy egyéni G-kód parancsot a csatlakoztatott nyomtatóra. A parancs elküldéséhez nyomja meg az 'enter' gombot."
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Ezt a beállítást megoszta az összes extruder között. Az itt megváltoztatott értékek az összes extrudernél meg fognak változni."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Extruder"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "A nyomtatófej célhőmérséklete. A fűtőblokk hőmérséklete a beállított értékre fog melegedni, vagy éppen hűlni. Ha ez az érték 0, akkor a fejfűtés ki fog kapcsolni."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Ennek a fejnek a jelenlegi hőmérséklete."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "A nyomtatófej előmelegítési hőmérséklete."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Elvet"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Előfűtés"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "A nyomtatófejet a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Az alapanyag színe ennél az extrudernél."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Az alapanyag ebben az extruderben."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "A fúvóka be van építve az extruderbe."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "A nyomtató nincs csatlakoztatva."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Tárgyasztal"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "A fűthető ágy beállítható célhőmérséklete. Ha beállítjuk ezt az értéket a tálca elkezd erre a hőmérsékletre melegedni, vagy éppen lehűlni. Ha az érték 0 a tálcafűtés kikapcsol."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "A fűthető ágy aktuális hőmérséklete."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "A tálca előmelegítési hőmérséklete."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "A fűthető tálcát, a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Bejelentkezés"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
 msgstr ""
+"Ennek a beállításnak az értéke eltér a profilban megadottól.\n"
+"\n"
+"Kattintson a profil értékének visszaállításához."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Checking..."
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
+"Ez az érték általában kalulálva van, de jelenleg abszolút értékre van beállítva \n"
+"\n"
+"Kattintson, hogy visszaállítsuk a kalkulált értéket."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Account synced"
+msgid "Hex"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr ""
+msgid "Active print"
+msgstr "Aktív nyomtatás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Feladat név"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Névtelen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Nyomtatási idő"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr ""
+msgid "Estimated time left"
+msgstr "Becsült hátralévő idő"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mutassa az online hibaelhárítási útmutatót"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Teljes képernyőre váltás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Kilépés a teljes képernyőn"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Visszavon"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Újra"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "Kilép"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "3D nézet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Előlnézet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Felülnézet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Bal oldalnézet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Jobb oldalnézet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Cura beállítása..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Nyomtató hozzáadása..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Nyomtatók kezelése..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Anyagok kezelése..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "Profil &frissítése a jelenlegi beállításokkal/felülírásokkal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Jelenlegi változtatások eldobása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "Profil &létrehozása a jelenlegi beállításokkal/felülírásokkal..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Profilok kezelése..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Online &Dokumentumok megjelenítése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Hibajelentés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Újdonságok"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Rólunk..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Modell törlés"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "&Középső modell a platformon"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "&Csoportosítás"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Csoport bontása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "&Modellek keverése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Modell többszörözés..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Mindent kijelöl"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Tárgyasztal törlése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Mindent újratölt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Minden modell elrendezése a tárgyasztalon"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Minden modell rendezése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Kijelöltek rendezése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Minden modellpozíció visszaállítása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Minden modelltranszformáció visszaállítása"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "Fájl(ok) megnyitása..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "Új projekt..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Konfigurációs mappa megjelenítése"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Beállítások láthatóságának beállítása..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Piactér"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Ezt a beállítást nem használjuk, mert minden ezen beállítással befolyásolt egyéb beállítás értéke felül van bírálva."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Befolyásolások"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Befolyásolja"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Ezt a beállítást megoszta az összes extruder között. Az itt megváltoztatott értékek az összes extrudernél meg fognak változni."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Ennek a beállításnak az értéke eltér a profilban megadottól.\n"
-"\n"
-"Kattintson a profil értékének visszaállításához."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
 msgstr ""
-"Ez az érték általában kalulálva van, de jelenleg abszolút értékre van beállítva \n"
-"\n"
-"Kattintson, hogy visszaállítsuk a kalkulált értéket."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Értékek másolása minden extruderre"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Minden változott érték másolása minden extruderre"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Beállítás elrejtése"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Ne jelenítsd meg ezt a beállítást"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Beállítás látható marad"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
 msgstr ""
-"Egyes beállítások eltérő értéken vannak a normál, kalkulált értékektől.\n"
-"\n"
-"Kattints, hogy ezek a beállítások láthatók legyenek."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Ez a csomag újraindítás után fog települni."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Beállítások"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Csomag telepítése"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Fájl(ok) megnyitása"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "A kiválasztott fájlok között több G-kód fájl is található.Egyszerre csak egy G-kód fájlt nyithat meg, ezért csak egy ilyen fájlt válasszon ki."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Nyomtató hozzáadása"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Újdonságok"
-
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Biztosítja a modellenkénti beállításokat."
+msgid "Provides a prepare stage in Cura."
+msgstr "Biztosítja az előkészítés nézetet a Cura-ban."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Modellenkénti beállítás-eszköz"
+msgid "Prepare Stage"
+msgstr "Előkészítés nézet"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Támogatást nyújt a Cura profilok importálásához."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Támogatást nyújt a Cura profilok exportálásához."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura profil olvasó"
+msgid "Cura Profile Writer"
+msgstr "Cura profil író"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Támogatást nyújt az X3D fájlok olvasásához."
+msgid "Provides support for reading model files."
+msgstr "Támogatást nyújt a modellfájlok olvasásához."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D Olvasó"
+msgid "Trimesh Reader"
+msgstr "Trimesh olvasó"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Konfiguráció biztonsági másolat készítése és visszaállítása."
+msgid "Checks for firmware updates."
+msgstr "Ellenőrzi a firmware frissítéseket."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura biztonsági mentések"
+msgid "Firmware Update Checker"
+msgstr "Frimrware frissítés ellenőrző"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "A géoi beállítások megváltoztatásának lehetőségét biztosítja.(például a építési méret, fúvóka méret, stb.)"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr ""
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
+msgid "Sentry Logger"
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Törlő hálót hoz létre, hogy bizonyos helyeken blokkolja a támasz nyomtatását"
+msgid "Provides a monitor stage in Cura."
+msgstr "Monitor nézetet biztosít a Cura -ban."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Támasz törlő"
+msgid "Monitor Stage"
+msgstr "Monitor nézet"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5973,105 +5968,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Cserélhető meghajtók kimeneti beépülője"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Gépi funkciókat biztosít a firmware frissítéséhez."
+msgid "Provides support for reading AMF files."
+msgstr "Támogatást nyújt az AMF fájlok olvasásához."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Firmware frissítő"
+msgid "AMF Reader"
+msgstr "AMF Olvasó"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Támogatást nyújt a profilok importálásához a régi Cura verziókból."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Támogatást nyújt az Ultimaker formátumú csomagok olvasásához."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Örökölt Cura profil olvasó"
+msgid "UFP Reader"
+msgstr "UFP Olvasó"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Támogatást nyújt a 3MF fájlok olvasásához."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr ""
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF olvasó"
+msgid "Ultimaker Digital Library"
+msgstr ""
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Támogatást nyújt az Ultimaker formátumú csomagok írásához."
+msgid "Provides the Per Model Settings."
+msgstr "Biztosítja a modellenkénti beállításokat."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP Író"
+msgid "Per Model Settings Tool"
+msgstr "Modellenkénti beállítás-eszköz"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr ""
+msgid "Provides a machine actions for updating firmware."
+msgstr "Gépi funkciókat biztosít a firmware frissítéséhez."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr ""
+msgid "Firmware Updater"
+msgstr "Firmware frissítő"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Támogatást nyújt a profilok g-kód fájlokból történő importálásához."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Kezeli a hálózati csatlakozásokat az Ultimaker hálózati nyomtatókhoz."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-kód profil olvasó"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker hálózati kapcsolat"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Előnézet biztosítása a Cura -ban."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Ellenőrzi a modelleket és a nyomtatási konfigurációt a lehetséges nyomtatási problémákra vonatkozóan, és javaslatokat ad."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Előnézet"
+msgid "Model Checker"
+msgstr "Modell-ellenőrző"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Röntgen nézetet biztosít."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgen nézet"
+msgid "Simulation View"
+msgstr "Szimulációs nézet"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Biztosítja a kapcsolatot a CuraEngine szeletelő motorhoz."
+msgid "Writes g-code to a file."
+msgstr "G-kódot ír fájlba."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine motor"
+msgid "G-code Writer"
+msgstr "G-kódot író"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Támogatást nyújt az AMF fájlok olvasásához."
+msgid "Provides support for writing 3MF files."
+msgstr "Támogatást nyújt a 3MF fájlok írásához."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF Olvasó"
+msgid "3MF Writer"
+msgstr "3MF író"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6083,55 +6078,35 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Tömörített G-kód olvasó"
 
-#: PostProcessingPlugin/plugin.json
-msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Bővítmény, amely lehetővé teszi a felhasználó által létrehozott szkriptek utófeldolgozást"
-
-#: PostProcessingPlugin/plugin.json
-msgctxt "name"
-msgid "Post Processing"
-msgstr "Utólagos feldolgozás"
-
-#: CuraProfileWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Támogatást nyújt a Cura profilok exportálásához."
-
-#: CuraProfileWriter/plugin.json
-msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura profil író"
-
-#: USBPrinting/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Elfogadja a G-kódot és elküldi őket egy nyomtatóra. A plugin a firmware-t is frissítheti."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Lehetővé teszi az XML-alapú anyagprofilok olvasását és írását."
 
-#: USBPrinting/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB nyomtatás"
+msgid "Material Profiles"
+msgstr "Alapanyag profilok"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Biztosítja az előkészítés nézetet a Cura-ban."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Biztosítja a kapcsolatot a CuraEngine szeletelő motorhoz."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Előkészítés nézet"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine motor"
 
-#: GCodeReader/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Lehetővé teszi a G-kód fájlok betöltését és megjelenítését."
+msgid "Provides support for reading X3D files."
+msgstr "Támogatást nyújt az X3D fájlok olvasásához."
 
-#: GCodeReader/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-kód olvasó"
+msgid "X3D Reader"
+msgstr "X3D Olvasó"
 
 #: ImageReader/plugin.json
 msgctxt "description"
@@ -6143,95 +6118,75 @@ msgctxt "name"
 msgid "Image Reader"
 msgstr "Kép olvasó"
 
-#: UltimakerMachineActions/plugin.json
-msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Gépi funkciók biztosítása az Ultimaker nyomtatók számára.(pl.: ágyszintezés varázsló, frissítések kiválasztása.)"
-
-#: UltimakerMachineActions/plugin.json
-msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker gépi funkciók"
-
-#: GCodeGzWriter/plugin.json
-msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "G-kódot ír egy tömörített archívumba."
-
-#: GCodeGzWriter/plugin.json
-msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Tömörített G-kód író"
-
-#: FirmwareUpdateChecker/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Ellenőrzi a firmware frissítéseket."
+msgid "Provides support for reading 3MF files."
+msgstr "Támogatást nyújt a 3MF fájlok olvasásához."
 
-#: FirmwareUpdateChecker/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Frimrware frissítés ellenőrző"
+msgid "3MF Reader"
+msgstr "3MF olvasó"
 
-#: SliceInfoPlugin/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Névtelen szelet-információt nyújt be. A beállítások révén letiltható."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Támogatást nyújt az Ultimaker formátumú csomagok írásához."
 
-#: SliceInfoPlugin/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Szeletelési infó"
+msgid "UFP Writer"
+msgstr "UFP Író"
 
-#: XmlMaterialProfile/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Lehetővé teszi az XML-alapú anyagprofilok olvasását és írását."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Támogatást nyújt a profilok importálásához a régi Cura verziókból."
 
-#: XmlMaterialProfile/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Alapanyag profilok"
+msgid "Legacy Cura Profile Reader"
+msgstr "Örökölt Cura profil olvasó"
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
 msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
+msgid "Version Upgrade 4.3 to 4.4"
 msgstr ""
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Keressen, kezeljen és telepítsen új Cura csomagokat."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "A konfigurációk frissítése Cura 2.1-ről Cura 2.2-re."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Eszköztár"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "A 2.1-es verzió frissítése 2.2-re"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "G-kódot ír fájlba."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "A konfigurációk frissítése Cura 4.1-ről Cura 4.2-re."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-kódot író"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "A 4.1-es verzió frissítése 4.2-re"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Szimulációs nézetet biztosít."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Szimulációs nézet"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
 #: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
@@ -6243,85 +6198,75 @@ msgctxt "name"
 msgid "Version Upgrade 4.5 to 4.6"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Frissíti a konfigurációt Cura 2.5-ről Cura 2.6-ra."
-
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "A 2.5-es verzió frissítése 2.6-ra"
-
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr ""
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "A konfigurációk frissítése Cura 3.3-ról Cura 3.4-re."
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr ""
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "A 3.3-as verzió frissítése 3.4-re"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
+msgid "Version Upgrade 4.8 to 4.9"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "A konfigurációt Cura 3.4-ről Cura 3.5-re frissíti."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "A konfigurációk frissítése Cura 2.7-ről Cura 3.0-ra."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "A 3.4-es verzió frissítése 3.5-re"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "A 2.7-es verzió frissítése 3.0-ra"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "A konfigurációk frissítése Cura 2.1-ről Cura 2.2-re."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "A 2.1-es verzió frissítése 2.2-re"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "A konfigurációk frissítése Cura 3.2-ről Cura 3.3-ra."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "A konfigurációk frissítése Cura 3.0-ról Cura 3.1-re."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "A 3.2-es verzió frissítése 3.3-ra"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "A 3.0-s verzió frissítése 3.1-re"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr ""
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "A konfigurációk frissítése Cura 2.6-ról Cura 2.7-re."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr ""
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "A 2.6-os verzió frissítése 2.7-re"
 
 #: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
@@ -6333,14 +6278,24 @@ msgctxt "name"
 msgid "Version Upgrade 4.2 to 4.3"
 msgstr "A 4.2-es verzió frissítése 4.3-ra"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "A konfigurációt Cura 4.0-ról Cura 4.1-re frissíti."
+
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "A 4.0-s verzió frissítése 4.1-re"
+
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
+msgid "Version Upgrade 4.6.2 to 4.7"
 msgstr ""
 
 #: VersionUpgrade/VersionUpgrade49to410/plugin.json
@@ -6353,25 +6308,65 @@ msgctxt "name"
 msgid "Version Upgrade 4.9 to 4.10"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "A konfigurációk frissítése Cura 2.7-ről Cura 3.0-ra."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "A konfigurációk frissítése Cura 2.2-ről Cura 2.4-re."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "A 2.7-es verzió frissítése 3.0-ra"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "A 2.2-es verzió frissítése 2.4-ig"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "A konfigurációk frissítése Cura 2.6-ról Cura 2.7-re."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "A konfigurációk frissítése Cura 3.2-ről Cura 3.3-ra."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "A 2.6-os verzió frissítése 2.7-re"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "A 3.2-es verzió frissítése 3.3-ra"
+
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Frissíti a konfigurációt Cura 2.5-ről Cura 2.6-ra."
+
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "A 2.5-es verzió frissítése 2.6-ra"
+
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "A konfigurációk frissítése Cura 3.5-ről Cura 4.0-ra."
+
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "A 3.5-es verzió frissítése 4.0-ra"
+
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "A konfigurációt Cura 3.4-ről Cura 3.5-re frissíti."
+
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "A 3.4-es verzió frissítése 3.5-re"
+
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr ""
+
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr ""
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6383,105 +6378,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "A konfigurációk frissítése Cura 3.3-ról Cura 3.4-re."
+msgid "Backup and restore your configuration."
+msgstr "Konfiguráció biztonsági másolat készítése és visszaállítása."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "A 3.3-as verzió frissítése 3.4-re"
+msgid "Cura Backups"
+msgstr "Cura biztonsági mentések"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "A konfigurációk frissítése Cura 3.0-ról Cura 3.1-re."
+msgid "Provides support for importing Cura profiles."
+msgstr "Támogatást nyújt a Cura profilok importálásához."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "A 3.0-s verzió frissítése 3.1-re"
+msgid "Cura Profile Reader"
+msgstr "Cura profil olvasó"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "A konfigurációt Cura 4.0-ról Cura 4.1-re frissíti."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Névtelen szelet-információt nyújt be. A beállítások révén letiltható."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "A 4.0-s verzió frissítése 4.1-re"
+msgid "Slice info"
+msgstr "Szeletelési infó"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr ""
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Támogatást nyújt a profilok g-kód fájlokból történő importálásához."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr ""
+msgid "G-code Profile Reader"
+msgstr "G-kód profil olvasó"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "A konfigurációk frissítése Cura 2.2-ről Cura 2.4-re."
+msgid "Writes g-code to a compressed archive."
+msgstr "G-kódot ír egy tömörített archívumba."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "A 2.2-es verzió frissítése 2.4-ig"
+msgid "Compressed G-code Writer"
+msgstr "Tömörített G-kód író"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "A konfigurációk frissítése Cura 4.1-ről Cura 4.2-re."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Bővítmény, amely lehetővé teszi a felhasználó által létrehozott szkriptek utófeldolgozást"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "A 4.1-es verzió frissítése 4.2-re"
+msgid "Post Processing"
+msgstr "Utólagos feldolgozás"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "A konfigurációk frissítése Cura 3.5-ről Cura 4.0-ra."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Törlő hálót hoz létre, hogy bizonyos helyeken blokkolja a támasz nyomtatását"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "A 3.5-es verzió frissítése 4.0-ra"
+msgid "Support Eraser"
+msgstr "Támasz törlő"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Kezeli a hálózati csatlakozásokat az Ultimaker hálózati nyomtatókhoz."
+msgid "Provides a preview stage in Cura."
+msgstr "Előnézet biztosítása a Cura -ban."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker hálózati kapcsolat"
+msgid "Preview Stage"
+msgstr "Előnézet"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Támogatást nyújt a modellfájlok olvasásához."
+msgid "Provides the X-Ray view."
+msgstr "Röntgen nézetet biztosít."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh olvasó"
+msgid "X-Ray View"
+msgstr "Röntgen nézet"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Támogatást nyújt az Ultimaker formátumú csomagok olvasásához."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Gépi funkciók biztosítása az Ultimaker nyomtatók számára.(pl.: ágyszintezés varázsló, frissítések kiválasztása.)"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP Olvasó"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker gépi funkciók"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6493,35 +6498,283 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Felület nézet"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Támogatást nyújt a 3MF fájlok írásához."
+msgid "Allows loading and displaying G-code files."
+msgstr "Lehetővé teszi a G-kód fájlok betöltését és megjelenítését."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF író"
+msgid "G-code Reader"
+msgstr "G-kód olvasó"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Monitor nézetet biztosít a Cura -ban."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "A géoi beállítások megváltoztatásának lehetőségét biztosítja.(például a építési méret, fúvóka méret, stb.)"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Monitor nézet"
+msgid "Machine Settings Action"
+msgstr ""
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Ellenőrzi a modelleket és a nyomtatási konfigurációt a lehetséges nyomtatási problémákra vonatkozóan, és javaslatokat ad."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Elfogadja a G-kódot és elküldi őket egy nyomtatóra. A plugin a firmware-t is frissítheti."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Modell-ellenőrző"
+msgid "USB printing"
+msgstr "USB nyomtatás"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Kiegészítő licencszerződés"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Kép konvertálás..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "A szélesség mm -ben a tárgyasztalon."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Áruház"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "A csomagok változásainak érvénybe lépése előtt újra kell indítania a Cura-t."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Telepítés"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Telepítve"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Kompatibilitás"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Gép"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Tárgyasztal"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Támasz"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Minőség"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Technikai adatlap"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Biztonsági adatlap"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Nyomtatási útmutató"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Weboldal"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "<a href='%1'>Bejelentkezés</a> szükséges a telepítéshez vagy frissítéshez"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>Anyagtekercsek vásárlása</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Frissítés"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Frissítés"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Frissítve"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Vissza"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Kiegészítők"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Telepítve"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Telepítés után újraindul"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "<a href='%1'>Bejelentkezés</a> szükséges a frissítéshez"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Leminősítés"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Eltávolítás"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Közösségi hozzájárulások"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Közösségi bővítmények"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Általános anyagok"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Csomagok beolvasása..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Weboldal"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "Email"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Verzió"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Utosó frissítés"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Letöltések"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Nem sikerült csatlakozni a Cura Package adatbázishoz. Kérjük, ellenőrizze a kapcsolatot."
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Eltávolítás jóváhagyása"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Távolítsd el a még használatban lévő anyagokat és / vagy profilokat.A megerősítés visszaállítja az alapanyagokat / profilokat alapértelmezett értékükre."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Alapanyagok"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Profilok"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Jóváhagy"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Néhány dolog problémát jelenthet ebben a nyomtatásban.Kattintson ide a beállítási tippek megtekintéséhez."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Támogató könyvtár a sík objektumok kezeléséhez"
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "&Tárgyasztal"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Létrehozás"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Másolás"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Nyomtató: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Frissítse a profilt az aktuális beállításokkal/felülbírálásokkal"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Téma:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "A módosítások érvénybe lépéséhez újra kell indítania az alkalmazást."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Több információ"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Létrehoz"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Nyomtató"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Egység"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Mutassa az online hibaelhárítási útmutatót"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Minden modell elrendezése a tárgyasztalon"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Piactér"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Keressen, kezeljen és telepítsen új Cura csomagokat."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Eszköztár"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Szimulációs nézetet biztosít."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/hu_HU/fdmextruder.def.json.po b/resources/i18n/hu_HU/fdmextruder.def.json.po
index f25f2b26c3..ce764cd92d 100644
--- a/resources/i18n/hu_HU/fdmextruder.def.json.po
+++ b/resources/i18n/hu_HU/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2020-03-24 09:27+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: AT-VLOG\n"
diff --git a/resources/i18n/hu_HU/fdmprinter.def.json.po b/resources/i18n/hu_HU/fdmprinter.def.json.po
index 3b2f0fa1df..f7c1c2d793 100644
--- a/resources/i18n/hu_HU/fdmprinter.def.json.po
+++ b/resources/i18n/hu_HU/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2020-03-24 09:43+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: AT-VLOG\n"
@@ -467,8 +467,8 @@ msgstr "A nyomtatófej és ventillátor ábrázolása"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "A nyomtatófej 2D -s árnyéka (ventillátorral együtt)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -741,6 +741,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "A nyomtatószál adagoló kerék átmérője az extruderben."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Minőség"
@@ -961,6 +971,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "A nyomtatandó falak száma. A falvastagság alapján számított és kerekített érték."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Külső fal tisztítási távolság"
@@ -991,14 +1051,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Optimalizálja a falak nyomtatásának sorrendjét, hogy csökkentse a visszahúzások számát és a megtett távolságot. A legtöbb alkatrész számára előnyös lehet ennek engedélyezése, de bizonyos esetekben valójában hosszabb is lehet.Ezért kérjük, hasonlítsa össze a nyomtatási idő becsléseit az optimalizálással és anélkül.Az első réteg nincs optimalizálva, ha a széleket építõlap-tapadási típusnak választják."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Külső falak a belsők előtt"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "A falakat külső, majd belső sorrendben nyomtatja, ha ez engedélyezve van.Ez hozzájárulhat a X és Y méret pontosságának javításához, különösen nagy viszkozitású műanyag, például ABS használatakor. Ez azonban csökkentheti a külső felület nyomtatási minőségét, különösen az átlapolásoknál."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1011,94 +1081,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Minden rétegben egy további extra falat nyomtat. Ez segít a kitöltésnek hozzáépülni a falhoz, ezáltal erősebb lesz a tárgy szerkezete."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Fali átlapolások kompenzálása"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Kompenzálja a száladagolást a fal azon részeinél, ahol az már elkészült."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Kompenzálja a külső fal átfedéseit"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Kompenzálja a száladagolást a külső fal azon részeinél, ahol az már elkészült."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Kompenzálja a belső fal átfedéseit"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Kompenzálja a száladagolást a belső fal azon részeinél, ahol az már elkészült."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Minimális fal adagolás"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "A fali vonalak minimális adagolása. A fal átlapolás kompenzáció csökkenti az adagolást, amikor a már meglévő falakhoz közel nyomtatunk. Azoknak a falaknak, ahol az adagolási sebesség kissebb lenne, mint ez a megadott érték, az útvonalat módosítani kell. Ennek a beállításnak a használatakor engedélyezni kell a a fal átfedés kompenzációját, és a külső falakat a belsők előtt kell nyomtatni."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Visszahúzás preferálása"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Ha engedélyezve van, akkor a visszahúzás van elsődlegesen használva a fésülés helyett, s így helyettesíti azokat a falakat, amiknek az anyag szükséglete az adagolási küszöb alatt lenne."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Falak közötti rések kitöltése"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Tölti ki a falak között azokat a réseket, ahol a falak nem találkoznak."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Seholsem"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Vékony falak nyomtatása"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Mindenhol"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Nyomtassa a modell egyes részeit vékonyabbra a vízszintes síkon, mint a fúvóka mérete."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Apró hézagok kiszűrése"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Szűrje ki az apró hézagokat, hogy csökkentse a hibák megjelenését a modell külsején."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Vékony falak nyomtatása"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Nyomtassa a modell egyes részeit vékonyabbra a vízszintes síkon, mint a fúvóka mérete."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2200,6 +2260,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Kristályos anyag"
@@ -2710,24 +2790,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "Az első pár réteget lassabban tudjuk nyomtatni, ha ezt a modell formája szükségessé teszi. Növelheti a tapadást a tárgyasztalhoz, így sikeresebb lehet a nyomtatás. A sebesség folyamatosan növekedni fog, ahogy emelkedik a rétegeken."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Adagolás kiegyenlítés"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "A normál vonalaktól vékonyabb vonalak nyomtatásakor a sebességet növelni fogja, miközben az extrudálás sebességét nem változatja. Így előfordulhat, hogy a modell vékonyabb darabjainál a vonalak szélessége kissebb lesz, mint a megadott.Ez a beállítás szabályozza az ilyen vonalaknak a nyomatatási sebesség változását."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Maximális adagolás kompenzáció sebesség"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "A maximális nyomtatási sebesség, amire a nyomtató kompenzálni tudja az adagolást."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4465,6 +4535,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "Az az extruder, amit a tapadásnövelő felületek, szoknya, perem, tutaj nyomtatására használunk. Csak multi extruder esetén használható."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Szoknya vonalszám"
@@ -4629,6 +4739,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "A tutajvonalak közötti távolság a felső tutajrétegeknél. A távolságnak meg kell egyeznie a vonalszélességgel, hogy a felület tömör legyen."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Tutaj közép vastagsága"
@@ -5129,6 +5249,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "A maximális eltérés, ha csökken a felbontás a maximális felbontás beállításnál. Ha ezt növeli, a nyomtatás kevésbé lesz pontos, de a g-kód kisebb lesz. A maximális eltérés a maximális felbontás korlátja, tehát ha a kettő ütközik, akkor a maximális eltérés lesz magasabb prioritású."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Különleges módok"
@@ -6421,6 +6551,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Parancssor beállításai"
@@ -6480,6 +6640,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "A modellre alkalmazandó átalakítási mátrix, amikor azt fájlból tölti be."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "A nyomtatófej 2D -s árnyéka (ventillátorral együtt)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Külső falak a belsők előtt"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "A falakat külső, majd belső sorrendben nyomtatja, ha ez engedélyezve van.Ez hozzájárulhat a X és Y méret pontosságának javításához, különösen nagy viszkozitású műanyag, például ABS használatakor. Ez azonban csökkentheti a külső felület nyomtatási minőségét, különösen az átlapolásoknál."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Fali átlapolások kompenzálása"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Kompenzálja a száladagolást a fal azon részeinél, ahol az már elkészült."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Kompenzálja a külső fal átfedéseit"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Kompenzálja a száladagolást a külső fal azon részeinél, ahol az már elkészült."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Kompenzálja a belső fal átfedéseit"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Kompenzálja a száladagolást a belső fal azon részeinél, ahol az már elkészült."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Minimális fal adagolás"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "A fali vonalak minimális adagolása. A fal átlapolás kompenzáció csökkenti az adagolást, amikor a már meglévő falakhoz közel nyomtatunk. Azoknak a falaknak, ahol az adagolási sebesség kissebb lenne, mint ez a megadott érték, az útvonalat módosítani kell. Ennek a beállításnak a használatakor engedélyezni kell a a fal átfedés kompenzációját, és a külső falakat a belsők előtt kell nyomtatni."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Visszahúzás preferálása"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Ha engedélyezve van, akkor a visszahúzás van elsődlegesen használva a fésülés helyett, s így helyettesíti azokat a falakat, amiknek az anyag szükséglete az adagolási küszöb alatt lenne."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Falak közötti rések kitöltése"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Tölti ki a falak között azokat a réseket, ahol a falak nem találkoznak."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Seholsem"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Mindenhol"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Apró hézagok kiszűrése"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Szűrje ki az apró hézagokat, hogy csökkentse a hibák megjelenését a modell külsején."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Adagolás kiegyenlítés"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "A normál vonalaktól vékonyabb vonalak nyomtatásakor a sebességet növelni fogja, miközben az extrudálás sebességét nem változatja. Így előfordulhat, hogy a modell vékonyabb darabjainál a vonalak szélessége kissebb lesz, mint a megadott.Ez a beállítás szabályozza az ilyen vonalaknak a nyomatatási sebesség változását."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Maximális adagolás kompenzáció sebesség"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "A maximális nyomtatási sebesség, amire a nyomtató kompenzálni tudja az adagolást."
+
 #~ msgctxt "machine_max_feedrate_e label"
 #~ msgid "Maximum Feedrate"
 #~ msgstr "Adagolás maximum"
diff --git a/resources/i18n/it_IT/cura.po b/resources/i18n/it_IT/cura.po
index 5187971b46..2a2bb9d8ad 100644
--- a/resources/i18n/it_IT/cura.po
+++ b/resources/i18n/it_IT/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2021-09-07 07:57+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Italian <info@lionbridge.com>, Italian <info@bothof.nl>\n"
@@ -17,1507 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 3.0\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Impossibile creare un archivio dalla directory dei dati utente: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Backup"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Tentativo di ripristinare un backup di Cura senza dati o metadati appropriati."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Tentativo di ripristinare un backup di Cura di versione superiore rispetto a quella corrente."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "Nel tentativo di ripristinare un backup di Cura, si è verificato il seguente errore:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Sincronizzare i profili del materiale con le stampanti prima di iniziare a stampare."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Nuovi materiali installati"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Sincronizza materiali"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "Ulteriori informazioni"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "Impossibile salvare archivio materiali in {}:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Impossibile salvare archivio materiali"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Errore sconosciuto."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "L’altezza del volume di stampa è stata ridotta a causa del valore dell’impostazione \"Sequenza di stampa” per impedire la collisione del gantry con i modelli stampati."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volume di stampa"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Rimuovere {0}? Questa operazione non può essere annullata!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Non sottoposto a override"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Sconosciuto"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Le stampanti riportate di seguito non possono essere collegate perché fanno parte di un gruppo"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Stampanti disponibili in rete"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Prepara"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Profilo Cura"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Profili personalizzati"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Tutti i tipi supportati ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Tutti i file (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visivo"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Il profilo visivo è destinato alla stampa di prototipi e modelli visivi, con l'intento di ottenere una qualità visiva e della superficie elevata."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Il profilo di progettazione è destinato alla stampa di prototipi funzionali e di componenti d'uso finale, allo scopo di ottenere maggiore precisione e tolleranze strette."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Bozza"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Il profilo bozza è destinato alla stampa dei prototipi iniziali e alla convalida dei concept, con l'intento di ridurre in modo significativo il tempo di stampa."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Materiale personalizzato"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Personalizzata"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Login non riuscito"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Ricerca nuova posizione per gli oggetti"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Ricerca posizione"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Impossibile individuare una posizione nel volume di stampa per tutti gli oggetti"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Impossibile individuare posizione"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Impossibile creare archivio di materiali da sincronizzare con le stampanti."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Impossibile caricare l'archivio di materiali da sincronizzare con le stampanti."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "La risposta da Digital Factory sembra essere danneggiata."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "Nella risposta da Digital Factory mancano informazioni importanti."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Impossibile connettersi a Digital Factory per sincronizzare i materiali con alcune delle stampanti."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Impossibile connettersi a Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Caricamento macchine in corso..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Impostazione delle preferenze..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Inizializzazione Active Machine in corso..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Inizializzazione gestore macchina in corso..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Inizializzazione volume di stampa in corso..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Impostazione scena in corso..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Caricamento interfaccia in corso..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Inizializzazione motore in corso..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "È possibile caricare un solo file codice G per volta. Importazione saltata {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Avvertenza"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Impossibile aprire altri file durante il caricamento del codice G. Importazione saltata {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Errore"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Salta"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Chiudi"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Avanti"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Fine"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Aggiungi"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Annulla"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Gruppo #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Parete esterna"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Pareti interne"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Rivestimento esterno"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Riempimento"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Riempimento del supporto"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Interfaccia supporto"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Supporto"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Skirt"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Torre di innesco"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Spostamenti"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Retrazioni"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Altro"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "Impossibile aprire le note sulla versione."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Impossibile avviare Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>Oops, Ultimaker Cura ha rilevato qualcosa che non sembra corretto.</p></b>\n"
-"                    <p>Abbiamo riscontrato un errore irrecuperabile durante l’avvio. È stato probabilmente causato da alcuni file di configurazione errati. Suggeriamo di effettuare il backup e ripristinare la configurazione.</p>\n"
-"                    <p>I backup sono contenuti nella cartella configurazione.</p>\n"
-"                    <p>Si prega di inviare questo Rapporto su crash per correggere il problema.</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Inviare il rapporto su crash a Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Mostra il rapporto su crash dettagliato"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Mostra cartella di configurazione"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Backup e reset configurazione"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Rapporto su crash"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Si è verificato un errore fatale in Cura. Si prega di inviare questo Rapporto su crash per correggere il problema</p></b>\n"
-"            <p>Usare il pulsante “Invia report\" per inviare automaticamente una segnalazione errore ai nostri server</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Informazioni di sistema"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Sconosciuto"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Versione Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Lingua Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "Lingua sistema operativo"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Piattaforma"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Versione Qt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "Versione PyQt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Non ancora inizializzato<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>Versione OpenGL: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>Fornitore OpenGL: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>Renderer OpenGL: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Analisi errori"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Registri"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Invia report"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Impossibile avviare un nuovo processo di accesso. Verificare se è ancora attivo un altro tentativo di accesso."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Impossibile raggiungere il server account Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "Log in non riuscito"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "Lo stato fornito non è corretto."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Timeout durante l'autenticazione con il server account."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Fornire i permessi necessari al momento dell'autorizzazione di questa applicazione."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Si è verificato qualcosa di inatteso durante il tentativo di accesso, riprovare."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Impossibile leggere la risposta."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Moltiplicazione e collocazione degli oggetti"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Sistemazione oggetti"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Sistemazione oggetto"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Non supportato"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Ugello"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Le impostazioni sono state modificate in base all’attuale disponibilità di estrusori:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Impostazioni aggiornate"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Estrusore disabilitato"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Il file esiste già"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Il file <filename>{0}</filename> esiste già. Sei sicuro di volerlo sovrascrivere?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "File URL non valido:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Impossibile esportare il profilo su <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Impossibile esportare il profilo su <filename>{0}</filename>: Rilevata anomalia durante scrittura plugin."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Profilo esportato su <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Esportazione riuscita"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Impossibile importare il profilo da <filename>{0}</filename>: {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Impossibile importare il profilo da <filename>{0}</filename> prima di aggiungere una stampante."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Nessun profilo personalizzato da importare nel file <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Impossibile importare il profilo da <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Questo profilo <filename>{0}</filename> contiene dati errati, impossibile importarlo."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Impossibile importare il profilo da <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "Profilo {0} importato correttamente."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "Il file {0} non contiene nessun profilo valido."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Il profilo {0} ha un tipo di file sconosciuto o corrotto."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Profilo personalizzato"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Il profilo è privo del tipo di qualità."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Non ci sono ancora stampanti attive."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "Impossibile aggiungere il profilo."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "Il tipo di qualità '{0}' non è compatibile con la definizione di macchina attiva corrente '{1}'."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Avvertenza: il profilo non è visibile in quanto il tipo di qualità '{0}' non è disponibile per la configurazione corrente. Passare alla combinazione materiale/ugello che consente di utilizzare questo tipo di qualità."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Impostazioni per modello"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configura impostazioni per modello"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Profilo Cura"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "File X3D"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Si è verificato un errore cercando di ripristinare il backup."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Backup"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Si è verificato un errore durante il caricamento del backup."
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Creazione del backup in corso..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Si è verificato un errore durante la creazione del backup."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Non è possibile accedere alle informazioni di aggiornamento."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Caricamento backup in corso..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Nuove funzionalità o bug fix potrebbero essere disponibili per {machine_name}. Se non è già stato fatto in precedenza, si consiglia di aggiornare il firmware della stampante alla versione {latest_version}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Caricamento backup completato."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "Nuovo firmware %s stabile disponibile"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Il backup supera la dimensione file massima."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Modalità di aggiornamento"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Gestione backup"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Impostazioni macchina"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blocco supporto"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Crea un volume in cui i supporti non vengono stampati."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Unità rimovibile"
+msgid "Monitor"
+msgstr "Controlla"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Salva su unità rimovibile"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Salva su unità rimovibile {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Non ci sono formati di file disponibili per la scrittura!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Salvataggio su unità rimovibile <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Salvataggio in corso"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Impossibile salvare <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Impossibile trovare un nome file durante il tentativo di scrittura su {device}."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Impossibile salvare su unità rimovibile {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Errore"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Salvato su unità rimovibile {0} come {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "File salvato"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Rimuovi"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Rimuovi il dispositivo rimovibile {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Espulso {0}. È ora possibile rimuovere in modo sicuro l'unità."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Rimozione sicura dell'hardware"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Espulsione non riuscita {0}. È possibile che un altro programma stia utilizzando l’unità."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Aggiornamento firmware"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profili Cura 15.04"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Consigliata"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personalizzata"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Il file di progetto <filename>{0}</filename> contiene un tipo di macchina sconosciuto <message>{1}</message>. Impossibile importare la macchina. Verranno invece importati i modelli."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Apri file progetto"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Il file di progetto <filename>{0}</filename> è diventato improvvisamente inaccessibile: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Impossibile aprire il file di progetto"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "Il file di progetto <filename>{0}</filename> è danneggiato: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Il file di progetto <filename>{0}</filename> è realizzato con profili sconosciuti a questa versione di Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "File 3MF"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Impossibile scrivere nel file UFP:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Pacchetto formato Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "File G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Anteprima"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Vista ai raggi X"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Elaborazione dei livelli"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informazioni"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "Sezionamento non riuscito con un errore imprevisto. Valutare se segnalare un bug nel registro problemi."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "Sezionamento non riuscito"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Segnala un errore"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Segnalare un errore nel registro problemi di Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Impossibile eseguire il sezionamento con il materiale corrente in quanto incompatibile con la macchina o la configurazione selezionata."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Sezionamento impossibile"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Impossibile eseguire il sezionamento con le impostazioni attuali. Le seguenti impostazioni presentano errori: {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Impossibile eseguire il sezionamento a causa di alcune impostazioni per modello. Le seguenti impostazioni presentano errori su uno o più modelli: {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Impossibile eseguire il sezionamento perché la torre di innesco o la posizione di innesco non sono valide."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Impossibile effettuare il sezionamento in quanto vi sono oggetti associati a Extruder %s disabilitato."
+msgid "Warning"
+msgstr "Avvertenza"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Verificare le impostazioni e controllare se i modelli:\n"
-"- Rientrano nel volume di stampa\n"
-"- Sono assegnati a un estrusore abilitato\n"
-"- Non sono tutti impostati come maglie modificatore"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Unità rimovibile"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "File AMF"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "File G-Code compresso"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Post-elaborazione"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modifica codice G"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Stampa USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Stampa tramite USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Stampa tramite USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Connesso tramite USB"
+msgid "Ultimaker Format Package"
+msgstr "Pacchetto formato Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Stampa tramite USB in corso, la chiusura di Cura interrompe la stampa. Confermare?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Stampa ancora in corso. Cura non può avviare un'altra stampa tramite USB finché la precedente non è stata completata."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Stampa in corso"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Prepara"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Parsing codice G"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Dettagli codice G"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Verifica che il codice G sia idoneo alla tua stampante e alla sua configurazione prima di trasmettere il file. La rappresentazione del codice G potrebbe non essere accurata."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "File G"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Immagine JPG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Immagine JPEG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Immagine PNG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Immagine BMP"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Immagine GIF"
+msgid "Per Model Settings"
+msgstr "Impostazioni per modello"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Livella piano di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configura impostazioni per modello"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Seleziona aggiornamenti"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter non supporta la modalità di testo."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Non è possibile accedere alle informazioni di aggiornamento."
+msgid "Update Firmware"
+msgstr "Aggiornamento firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Nuove funzionalità o bug fix potrebbero essere disponibili per {machine_name}. Se non è già stato fatto in precedenza, si consiglia di aggiornare il firmware della stampante alla versione {latest_version}."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "Nuovo firmware %s stabile disponibile"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Modalità di aggiornamento"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "Impossibile leggere il file di dati di esempio."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "Affinché le modifiche diventino effettive, è necessario chiudere e riavviare {}."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Sincronizzazione in corso..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Modifiche rilevate dal tuo account Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Desiderate sincronizzare pacchetti materiale e software con il vostro account?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Sincronizza"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Rifiuta e rimuovi dall'account"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Impossibile scaricare i plugin {}"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Non accetto"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Accetta"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Accordo di licenza plugin"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter non supporta la modalità non di testo."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Preparare il codice G prima dell’esportazione."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Cura non visualizza in modo accurato i layer se la funzione Wire Printing è abilitata."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura ha rilevato dei profili di materiale non ancora installati sulla stampante host del gruppo {0}."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Vista simulazione"
+msgid "Sending materials to printer"
+msgstr "Invio dei materiali alla stampante"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Non viene visualizzato nulla poiché è necessario prima effetuare lo slicing."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Tentativo di connessione a {0} in corso, che non è l'host di un gruppo. È possibile visitare la pagina web per configurarla come host del gruppo."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Nessun layer da visualizzare"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Non mostrare nuovamente questo messaggio"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Visualizzazione strato"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Stampa sulla rete"
+msgid "Not a group host"
+msgstr "Non host del gruppo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Stampa sulla rete"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Configurare il gruppo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Collegato alla rete"
+msgid "Sending Print Job"
+msgstr "Invio di un processo di stampa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "domani"
+msgid "Uploading print job to printer."
+msgstr "Caricamento del processo di stampa sulla stampante."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "oggi"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "La coda dei processi di stampa è piena. La stampante non può accettare un nuovo processo."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Collega tramite rete"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "Coda piena"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Attendere che sia stato inviato il processo corrente."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Errore di stampa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Processo di stampa inviato con successo alla stampante."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Dati inviati"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Si sta tentando di connettersi a una stampante che non esegue Ultimaker Connect. Aggiornare la stampante con il firmware più recente."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Aggiornare la stampante"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "La coda dei processi di stampa è piena. La stampante non può accettare un nuovo processo."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "Coda piena"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Invio di un processo di stampa"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Caricamento del processo di stampa sulla stampante."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura ha rilevato dei profili di materiale non ancora installati sulla stampante host del gruppo {0}."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Invio dei materiali alla stampante"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Impossibile caricare i dati sulla stampante."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Errore di rete"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Tentativo di connessione a {0} in corso, che non è l'host di un gruppo. È possibile visitare la pagina web per configurarla come host del gruppo."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Non host del gruppo"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Configurare il gruppo"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1527,66 +296,85 @@ msgstr ""
 "Impossibile connettere la stampante <b>{printer_name}</b> tramite cloud.\n"
 " Gestisci la coda di stampa e monitora le stampe da qualsiasi posizione collegando la stampante a Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "Pronto per la stampa tramite cloud?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Per iniziare"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "Ulteriori informazioni"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Stampa tramite cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Si sta tentando di connettersi a una stampante che non esegue Ultimaker Connect. Aggiornare la stampante con il firmware più recente."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Aggiornare la stampante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Impossibile caricare i dati sulla stampante."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Errore di rete"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Stampa sulla rete"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Stampa tramite cloud"
+msgid "Print over network"
+msgstr "Stampa sulla rete"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Collegato tramite cloud"
+msgid "Connected over the network"
+msgstr "Collegato alla rete"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Monitora stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "domani"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Traccia la stampa in Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "oggi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Codice di errore sconosciuto durante il caricamento del processo di stampa: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Collega tramite rete"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nuova stampante rilevata dall'account Ultimaker"
 msgstr[1] "Nuove stampanti rilevate dall'account Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Aggiunta della stampante {name} ({model}) dall'account"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1594,71 +382,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... e {0} altra"
 msgstr[1] "... e altre {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Stampanti aggiunte da Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Non è disponibile una connessione cloud per una stampante"
 msgstr[1] "Non è disponibile una connessione cloud per alcune stampanti"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Questa stampante non è collegata a Digital Factory:"
 msgstr[1] "Queste stampanti non sono collegate a Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Per stabilire una connessione, visitare {website_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Mantenere le configurazioni delle stampanti"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Rimuovere le stampanti"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} sarà rimossa fino alla prossima sincronizzazione account."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Per rimuovere definitivamente {printer_name}, visitare {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Rimuovere temporaneamente {printer_name}?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Rimuovere le stampanti?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1674,7 +462,7 @@ msgstr[1] ""
 "Si stanno per rimuovere {0} stampanti da Cura. Questa azione non può essere annullata.\n"
 "Continuare?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1683,2079 +471,3124 @@ msgstr ""
 "Si stanno per rimuovere tutte le stampanti da Cura. Questa azione non può essere annullata. \n"
 "Continuare?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Stampa tramite cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Stampa tramite cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Collegato tramite cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Monitora stampa"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Traccia la stampa in Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Codice di errore sconosciuto durante il caricamento del processo di stampa: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Assistente modello 3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "Le aree evidenziate indicano superfici mancanti o estranee. Correggi il modello e aprilo nuovamente in Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>La stampa di uno o più modelli 3D può non avvenire in modo ottimale a causa della dimensioni modello e della configurazione materiale:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Scopri come garantire la migliore qualità ed affidabilità di stampa.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Visualizza la guida alla qualità di stampa</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Cura non visualizza in modo accurato i layer se la funzione Wire Printing è abilitata."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Errori modello"
+msgid "Simulation View"
+msgstr "Vista simulazione"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Visualizzazione compatta"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Non viene visualizzato nulla poiché è necessario prima effetuare lo slicing."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Nessun layer da visualizzare"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Non mostrare nuovamente questo messaggio"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Visualizzazione strato"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter non supporta la modalità non di testo."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Preparare il codice G prima dell’esportazione."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "File G-Code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Errore scrittura file 3MF."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "Plug-in Writer 3MF danneggiato."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Ancora nessuna area di lavoro da scrivere. Aggiungere innanzitutto una stampante."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Nessuna autorizzazione di scrittura dell'area di lavoro qui."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "Il sistema operativo non consente di salvare un file di progetto in questa posizione o con questo nome file."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "File 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "File 3MF Progetto Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Controlla"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "File G-Code compresso"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "Sezionamento non riuscito con un errore imprevisto. Valutare se segnalare un bug nel registro problemi."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "Sezionamento non riuscito"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Segnala un errore"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Segnalare un errore nel registro problemi di Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Impossibile eseguire il sezionamento con il materiale corrente in quanto incompatibile con la macchina o la configurazione selezionata."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Assistente modello 3D"
+msgid "Unable to slice"
+msgstr "Sezionamento impossibile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Impossibile eseguire il sezionamento con le impostazioni attuali. Le seguenti impostazioni presentano errori: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Impossibile eseguire il sezionamento a causa di alcune impostazioni per modello. Le seguenti impostazioni presentano errori su uno o più modelli: {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Impossibile eseguire il sezionamento perché la torre di innesco o la posizione di innesco non sono valide."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Impossibile effettuare il sezionamento in quanto vi sono oggetti associati a Extruder %s disabilitato."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>La stampa di uno o più modelli 3D può non avvenire in modo ottimale a causa della dimensioni modello e della configurazione materiale:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Scopri come garantire la migliore qualità ed affidabilità di stampa.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Visualizza la guida alla qualità di stampa</a></p>"
+"Verificare le impostazioni e controllare se i modelli:\n"
+"- Rientrano nel volume di stampa\n"
+"- Sono assegnati a un estrusore abilitato\n"
+"- Non sono tutti impostati come maglie modificatore"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Tipo di maglia"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Elaborazione dei livelli"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Modello normale"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informazioni"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Stampa come supporto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "File X3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Modificare le impostazioni per le sovrapposizioni"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Immagine JPG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Non supportano le sovrapposizioni"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Immagine JPEG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Solo maglia di riempimento"
+msgid "PNG Image"
+msgstr "Immagine PNG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Ritaglio mesh"
+msgid "BMP Image"
+msgstr "Immagine BMP"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Seleziona impostazioni"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Immagine GIF"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Seleziona impostazioni di personalizzazione per questo modello"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Ugello"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtro..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Il file di progetto <filename>{0}</filename> contiene un tipo di macchina sconosciuto <message>{1}</message>. Impossibile importare la macchina. Verranno invece importati i modelli."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Mostra tutto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Apri file progetto"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Backup Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Il file di progetto <filename>{0}</filename> è diventato improvvisamente inaccessibile: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Versione Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Impossibile aprire il file di progetto"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Macchine"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "Il file di progetto <filename>{0}</filename> è danneggiato: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiali"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Il file di progetto <filename>{0}</filename> è realizzato con profili sconosciuti a questa versione di Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profili"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Consigliata"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plugin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personalizzata"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Ulteriori informazioni?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "File 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Esegui backup adesso"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Impossibile scrivere nel file UFP:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Backup automatico"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profili Cura 15.04"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Crea automaticamente un backup ogni giorno in cui viene avviata Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Backup"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Ripristina"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Si è verificato un errore durante il caricamento del backup."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Cancella backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Creazione del backup in corso..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Sei sicuro di voler cancellare questo backup? Questa operazione non può essere annullata."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Si è verificato un errore durante la creazione del backup."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Ripristina backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Caricamento backup in corso..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Riavviare Cura prima di ripristinare il backup. Chiudere Cura adesso?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Caricamento backup completato."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Backup e sincronizzazione delle impostazioni Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Il backup supera la dimensione file massima."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Accedi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Gestione backup"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "I miei backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Backup"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Nessun backup. Usare il pulsante ‘Esegui backup adesso’ per crearne uno."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Si è verificato un errore cercando di ripristinare il backup."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Durante la fase di anteprima, saranno visibili solo 5 backup. Rimuovi un backup per vedere quelli precedenti."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "Impossibile leggere il file di dati di esempio."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Impostazioni della stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter non supporta la modalità di testo."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Larghezza)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Post-elaborazione"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modifica codice G"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Profondità)"
+msgid "Support Blocker"
+msgstr "Blocco supporto"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Altezza)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Crea un volume in cui i supporti non vengono stampati."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forma del piano di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Anteprima"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origine al centro"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Vista ai raggi X"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Piano riscaldato"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Livella piano di stampa"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volume di stampa riscaldato"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Seleziona aggiornamenti"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Versione codice G"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Impostazioni della testina di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Altezza gantry"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Numero di estrusori"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Applica offset estrusore a gcode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "Le aree evidenziate indicano superfici mancanti o estranee. Correggi il modello e aprilo nuovamente in Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Codice G avvio"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Errori modello"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Codice G fine"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "Ulteriori informazioni"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Impostazioni ugello"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Visualizzazione compatta"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Dimensione ugello"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Parsing codice G"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diametro del materiale compatibile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Dettagli codice G"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Scostamento X ugello"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Verifica che il codice G sia idoneo alla tua stampante e alla sua configurazione prima di trasmettere il file. La rappresentazione del codice G potrebbe non essere accurata."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Scostamento Y ugello"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "File G"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Numero ventola di raffreddamento"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Impostazioni macchina"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Codice G avvio estrusore"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Stampa USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Codice G fine estrusore"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Stampa tramite USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Stampa tramite USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Aggiornamento firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Connesso tramite USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "Il firmware è la parte di software eseguita direttamente sulla stampante 3D. Questo firmware controlla i motori passo-passo, regola la temperatura e, in ultima analisi, consente il funzionamento della stampante."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Stampa tramite USB in corso, la chiusura di Cura interrompe la stampa. Confermare?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Stampa ancora in corso. Cura non può avviare un'altra stampa tramite USB finché la precedente non è stata completata."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Stampa in corso"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Caricamento macchine in corso..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Impostazione delle preferenze..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Inizializzazione Active Machine in corso..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Inizializzazione gestore macchina in corso..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Inizializzazione volume di stampa in corso..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Impostazione scena in corso..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Caricamento interfaccia in corso..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Inizializzazione motore in corso..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "È possibile caricare un solo file codice G per volta. Importazione saltata {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Impossibile aprire altri file durante il caricamento del codice G. Importazione saltata {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "Il firmware inviato a corredo delle nuove stampanti funziona, tuttavia le nuove versioni tendono ad avere più funzioni ed ottimizzazioni."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Aggiorna automaticamente il firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visivo"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Carica il firmware personalizzato"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Il profilo visivo è destinato alla stampa di prototipi e modelli visivi, con l'intento di ottenere una qualità visiva e della superficie elevata."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "Impossibile aggiornare il firmware: nessun collegamento con la stampante."
+msgid "Engineering"
+msgstr "Engineering"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Il profilo di progettazione è destinato alla stampa di prototipi funzionali e di componenti d'uso finale, allo scopo di ottenere maggiore precisione e tolleranze strette."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "Impossibile aggiornare il firmware: il collegamento con la stampante non supporta l’aggiornamento del firmware."
+msgid "Draft"
+msgstr "Bozza"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Seleziona il firmware personalizzato"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Il profilo bozza è destinato alla stampa dei prototipi iniziali e alla convalida dei concept, con l'intento di ridurre in modo significativo il tempo di stampa."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Aggiornamento del firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Non sottoposto a override"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Rimuovere {0}? Questa operazione non può essere annullata!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Aggiornamento firmware."
+msgid "Unknown"
+msgstr "Sconosciuto"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Aggiornamento del firmware completato."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Le stampanti riportate di seguito non possono essere collegate perché fanno parte di un gruppo"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Aggiornamento firmware non riuscito a causa di un errore sconosciuto."
+msgid "Available networked printers"
+msgstr "Stampanti disponibili in rete"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calcolato"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Sincronizzare i profili del materiale con le stampanti prima di iniziare a stampare."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Nuovi materiali installati"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Aggiornamento firmware non riuscito a causa di un errore di comunicazione."
+msgid "Custom Material"
+msgstr "Materiale personalizzato"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Aggiornamento firmware non riuscito a causa di un errore di input/output."
+msgid "Custom"
+msgstr "Personalizzata"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Aggiornamento firmware non riuscito per firmware mancante."
+msgid "Custom profiles"
+msgstr "Profili personalizzati"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Apri progetto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Tutti i tipi supportati ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Aggiorna esistente"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Tutti i file (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Crea nuovo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Impossibile creare archivio di materiali da sincronizzare con le stampanti."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Riepilogo - Progetto Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Impossibile caricare l'archivio di materiali da sincronizzare con le stampanti."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Impostazioni della stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "La risposta da Digital Factory sembra essere danneggiata."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Come può essere risolto il conflitto nella macchina?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "Nella risposta da Digital Factory mancano informazioni importanti."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tipo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Impossibile connettersi a Digital Factory per sincronizzare i materiali con alcune delle stampanti."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Gruppo stampanti"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Impossibile connettersi a Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Impostazioni profilo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Impossibile creare un archivio dalla directory dei dati utente: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Come può essere risolto il conflitto nel profilo?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Tentativo di ripristinare un backup di Cura senza dati o metadati appropriati."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nome"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Tentativo di ripristinare un backup di Cura di versione superiore rispetto a quella corrente."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "Nel tentativo di ripristinare un backup di Cura, si è verificato il seguente errore:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Non nel profilo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Ricerca nuova posizione per gli oggetti"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 override"
-msgstr[1] "%1 override"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Ricerca posizione"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivato da"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Impossibile individuare una posizione nel volume di stampa per tutti gli oggetti"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 override"
-msgstr[1] "%1, %2 override"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Impossibile individuare posizione"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Impostazioni materiale"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Login non riuscito"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Come può essere risolto il conflitto nel materiale?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Parete esterna"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Impostazione visibilità"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Pareti interne"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modalità"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Rivestimento esterno"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Impostazioni visibili:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Riempimento"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 su %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Riempimento del supporto"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Il caricamento di un progetto annulla tutti i modelli sul piano di stampa."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Interfaccia supporto"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Apri"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Supporto"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Plug-in di post-elaborazione"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Skirt"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Script di post-elaborazione"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Torre di innesco"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Aggiungi uno script"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Spostamenti"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Retrazioni"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Altro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Impostazioni"
+msgid "Group #{group_nr}"
+msgstr "Gruppo #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Modificare gli script di post-elaborazione attivi."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "Impossibile aprire le note sulla versione."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "È attivo il seguente script:"
-msgstr[1] "Sono attivi i seguenti script:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Salta"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Converti immagine..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Chiudi"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "La distanza massima di ciascun pixel da \"Base.\""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Aggiungi"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Altezza (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Fine"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "L'altezza della base dal piano di stampa in millimetri."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Annulla"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Avanti"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "La larghezza in millimetri sul piano di stampa."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "L’altezza del volume di stampa è stata ridotta a causa del valore dell’impostazione \"Sequenza di stampa” per impedire la collisione del gantry con i modelli stampati."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Larghezza (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Volume di stampa"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "La profondità in millimetri sul piano di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "Impossibile salvare archivio materiali in {}:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profondità (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Impossibile salvare archivio materiali"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Per le litofanie, i pixel scuri devono corrispondere alle posizioni più spesse per bloccare maggiormente il passaggio della luce. Per le mappe con altezze superiori, i pixel più chiari indicano un terreno più elevato, quindi nel modello 3D generato i pixel più chiari devono corrispondere alle posizioni più spesse."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Errore sconosciuto."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Più scuro è più alto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "Il file esiste già"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Più chiaro è più alto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Il file <filename>{0}</filename> esiste già. Sei sicuro di volerlo sovrascrivere?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Per le litofanie, è disponibile un semplice modello logaritmico per la traslucenza. Per le mappe delle altezze, i valori in pixel corrispondono alle altezze in modo lineare."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "File URL non valido:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Lineare"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Non supportato"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Traslucenza"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Percentuale di luce che penetra una stampa dello spessore di 1 millimetro. Se questo valore si riduce, il contrasto nelle aree scure dell'immagine aumenta, mentre il contrasto nelle aree chiare dell'immagine diminuisce."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Le impostazioni sono state modificate in base all’attuale disponibilità di estrusori:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Trasmittanza di 1 mm (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Impostazioni aggiornate"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "La quantità di smoothing (levigatura) da applicare all'immagine."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Estrusore disabilitato"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Smoothing"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Impossibile esportare il profilo su <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Impossibile esportare il profilo su <filename>{0}</filename>: Rilevata anomalia durante scrittura plugin."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Seleziona qualsiasi aggiornamento realizzato per questa Ultimaker Original"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Profilo esportato su <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Piano di stampa riscaldato (kit ufficiale o integrato)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Esportazione riuscita"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Livellamento del piano di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Impossibile importare il profilo da <filename>{0}</filename>: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Per assicurarsi stampe di alta qualità, è ora possibile regolare il piano di stampa. Quando si fa clic su 'Spostamento alla posizione successiva' l'ugello si sposterà in diverse posizioni che è possibile regolare."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Impossibile importare il profilo da <filename>{0}</filename> prima di aggiungere una stampante."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Per ciascuna posizione: inserire un pezzo di carta sotto l'ugello e regolare la stampa dell'altezza del piano di stampa. L'altezza del piano di stampa è corretta quando la carta sfiora la punta dell'ugello."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Nessun profilo personalizzato da importare nel file <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Avvio livellamento del piano di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Impossibile importare il profilo da <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Spostamento alla posizione successiva"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Questo profilo <filename>{0}</filename> contiene dati errati, impossibile importarlo."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Maggiori informazioni sulla raccolta di dati anonimi"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Impossibile importare il profilo da <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura acquisisce dati anonimi per migliorare la qualità di stampa e l'esperienza dell'utente. Di seguito è riportato un esempio dei dati condivisi:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "Profilo {0} importato correttamente."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Non desidero inviare dati anonimi"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "Il file {0} non contiene nessun profilo valido."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Consenti l'invio di dati anonimi"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Il profilo {0} ha un tipo di file sconosciuto o corrotto."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Mercato"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Profilo personalizzato"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Riavviare Cura per rendere effettive le modifiche apportate ai pacchetti."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Il profilo è privo del tipo di qualità."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Chiudere %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Non ci sono ancora stampanti attive."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Installazione"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "Impossibile aggiungere il profilo."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Installa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "Il tipo di qualità '{0}' non è compatibile con la definizione di macchina attiva corrente '{1}'."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Avvertenza: il profilo non è visibile in quanto il tipo di qualità '{0}' non è disponibile per la configurazione corrente. Passare alla combinazione materiale/ugello che consente di utilizzare questo tipo di qualità."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Vai al Marketplace web"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Moltiplicazione e collocazione degli oggetti"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Cerca materiali"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Sistemazione oggetti"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilità"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Sistemazione oggetto"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Macchina"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Impossibile avviare un nuovo processo di accesso. Verificare se è ancora attivo un altro tentativo di accesso."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Piano di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Impossibile raggiungere il server account Ultimaker."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Supporto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "Log in non riuscito"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualità"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Impossibile leggere la risposta."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Scheda dati tecnici"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "Lo stato fornito non è corretto."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Scheda dati di sicurezza"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Timeout durante l'autenticazione con il server account."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Linee guida di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Fornire i permessi necessari al momento dell'autorizzazione di questa applicazione."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Sito web"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Si è verificato qualcosa di inatteso durante il tentativo di accesso, riprovare."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Log in</a> deve essere installato o aggiornato"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Impossibile avviare Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Acquista bobine di materiale</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Oops, Ultimaker Cura ha rilevato qualcosa che non sembra corretto.</p></b>\n"
+"                    <p>Abbiamo riscontrato un errore irrecuperabile durante l’avvio. È stato probabilmente causato da alcuni file di configurazione errati. Suggeriamo di effettuare il backup e ripristinare la configurazione.</p>\n"
+"                    <p>I backup sono contenuti nella cartella configurazione.</p>\n"
+"                    <p>Si prega di inviare questo Rapporto su crash per correggere il problema.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Aggiorna"
+msgid "Send crash report to Ultimaker"
+msgstr "Inviare il rapporto su crash a Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Aggiornamento in corso"
+msgid "Show detailed crash report"
+msgstr "Mostra il rapporto su crash dettagliato"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Aggiornamento eseguito"
+msgid "Show configuration folder"
+msgstr "Mostra cartella di configurazione"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Indietro"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plugin"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiali"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Installa"
+msgid "Backup and Reset Configuration"
+msgstr "Backup e reset configurazione"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "L'installazione sarà eseguita al riavvio"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Rapporto su crash"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Log in</a> deve essere aggiornato"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Si è verificato un errore fatale in Cura. Si prega di inviare questo Rapporto su crash per correggere il problema</p></b>\n"
+"            <p>Usare il pulsante “Invia report\" per inviare automaticamente una segnalazione errore ai nostri server</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgrade"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Informazioni di sistema"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Disinstalla"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Sconosciuto"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contributi della comunità"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Versione Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Plugin della comunità"
+msgid "Cura language"
+msgstr "Lingua Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiali generici"
+msgid "OS language"
+msgstr "Lingua sistema operativo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Recupero dei pacchetti..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Piattaforma"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Sito web"
+msgid "Qt version"
+msgstr "Versione Qt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "PyQt version"
+msgstr "Versione PyQt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Accedere per ottenere i plugin e i materiali verificati per Ultimaker Cura Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Versione"
+msgid "Not yet initialized<br/>"
+msgstr "Non ancora inizializzato<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Ultimo aggiornamento"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>Versione OpenGL: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marchio"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>Fornitore OpenGL: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Download"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>Renderer OpenGL: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Plugin installati"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Analisi errori"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Non è stato installato alcun plugin."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Registri"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Materiali installati"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Invia report"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Non è stato installato alcun materiale."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Accertarsi che la stampante sia collegata:\n"
+"- Controllare se la stampante è accesa.\n"
+"- Controllare se la stampante è collegata alla rete.\n"
+"- Controllare se è stato effettuato l'accesso per rilevare le stampanti collegate al cloud."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Plugin inseriti nel bundle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Collegare la stampante alla rete."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Materiali inseriti nel bundle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Visualizza i manuali utente online"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Impossibile connettersi al database pacchetto Cura. Verificare la connessione."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Al fine di monitorare la stampa da Cura, collegare la stampante."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "È necessario accettare la licenza per installare il pacchetto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Seleziona impostazioni di personalizzazione per questo modello"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Modifiche dall'account"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtro..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Rimuovi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Mostra tutto"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Avanti"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Tipo di maglia"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Verranno aggiunti i seguenti pacchetti:"
+msgid "Normal model"
+msgstr "Modello normale"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Impossibile installare i seguenti pacchetti a causa di una versione di Cura non compatibile:"
+msgid "Print as support"
+msgstr "Stampa come supporto"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Conferma disinstalla"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Modificare le impostazioni per le sovrapposizioni"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Si stanno installando materiali e/o profili ancora in uso. La conferma ripristina i seguenti materiali/profili ai valori predefiniti."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "Non supportano le sovrapposizioni"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiali"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Solo maglia di riempimento"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profili"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Ritaglio mesh"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Conferma"
+msgid "Select settings"
+msgstr "Seleziona impostazioni"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Aggiornamento firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Schema colori"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "Il firmware è la parte di software eseguita direttamente sulla stampante 3D. Questo firmware controlla i motori passo-passo, regola la temperatura e, in ultima analisi, consente il funzionamento della stampante."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Colore materiale"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "Il firmware inviato a corredo delle nuove stampanti funziona, tuttavia le nuove versioni tendono ad avere più funzioni ed ottimizzazioni."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Tipo di linea"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Aggiorna automaticamente il firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Velocità"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Carica il firmware personalizzato"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Spessore layer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "Impossibile aggiornare il firmware: nessun collegamento con la stampante."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Larghezza della linea"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "Impossibile aggiornare il firmware: il collegamento con la stampante non supporta l’aggiornamento del firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Flusso"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Seleziona il firmware personalizzato"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Modalità di compatibilità"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Aggiornamento del firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Spostamenti"
+msgid "Updating firmware."
+msgstr "Aggiornamento firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Helper"
+msgid "Firmware update completed."
+msgstr "Aggiornamento del firmware completato."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Guscio"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Aggiornamento firmware non riuscito a causa di un errore sconosciuto."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Riempimento"
+msgid "Firmware update failed due to an communication error."
+msgstr "Aggiornamento firmware non riuscito a causa di un errore di comunicazione."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "Avvia"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Aggiornamento firmware non riuscito a causa di un errore di input/output."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Mostra solo strati superiori"
+msgid "Firmware update failed due to missing firmware."
+msgstr "Aggiornamento firmware non riuscito per firmware mancante."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Mostra 5 strati superiori in dettaglio"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Interrotto"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Superiore / Inferiore"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Terminato"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Parete interna"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Preparazione in corso..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Interr. in corso..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "max"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Non riuscita"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Messa in pausa..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "In pausa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Ripresa in corso..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Richiede un'azione"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Finisce %1 a %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Gestione stampanti"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Vetro"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Aggiornare il firmware della stampante per gestire la coda da remoto."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Impossibile visualizzare feed della Webcam per stampanti cloud da Ultimaker Cura. Fare clic su \"Gestione stampanti\" per visitare Ultimaker Digital Factory e visualizzare questa Webcam."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Caricamento in corso..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Non disponibile"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Non raggiungibile"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Ferma"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Preparazione in corso..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Stampa in corso"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Senza titolo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonimo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Richiede modifiche di configurazione"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Dettagli"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Stampante non disponibile"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Primo disponibile"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Coda di stampa"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gestisci nel browser"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Non sono presenti processi di stampa nella coda. Eseguire lo slicing e inviare un processo per aggiungerne uno."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Processi di stampa"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Tempo di stampa totale"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "In attesa"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Stampa sulla rete"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Stampa"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Selezione stampante"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Modifiche configurazione"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Override"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "La stampante assegnata, %1, richiede la seguente modifica di configurazione:"
 msgstr[1] "La stampante assegnata, %1, richiede le seguenti modifiche di configurazione:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "La stampante %1 è assegnata, ma il processo contiene una configurazione materiale sconosciuta."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Cambia materiale %1 da %2 a %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "Caricare %3 come materiale %1 (Operazione non annullabile)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Cambia print core %1 da %2 a %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Cambia piano di stampa a %1 (Operazione non annullabile)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "L’override utilizza le impostazioni specificate con la configurazione stampante esistente. Ciò può causare una stampa non riuscita."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Alluminio"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Terminato"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Interr. in corso..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Interrotto"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Non riuscita"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Messa in pausa..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "In pausa"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Ripresa in corso..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Stampa sulla rete"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Richiede un'azione"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Stampa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Finisce %1 a %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Selezione stampante"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Collega alla stampante in rete"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Per stampare direttamente sulla stampante in rete, verificare che la stampante desiderata sia collegata alla rete mediante un cavo di rete o mediante collegamento alla rete WIFI. Se non si esegue il collegamento di Cura alla stampante, è comunque possibile utilizzare una chiavetta USB per trasferire i file codice G alla stampante."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Selezionare la stampante dall’elenco seguente:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Modifica"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Rimuovi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Aggiorna"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Se la stampante non è nell’elenco, leggere la <a href='%1'>guida alla risoluzione dei problemi per la stampa in rete</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tipo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Versione firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Indirizzo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Questa stampante non è predisposta per comandare un gruppo di stampanti."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Questa stampante comanda un gruppo di %1 stampanti."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "La stampante a questo indirizzo non ha ancora risposto."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Collega"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Indirizzo IP non valido"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Inserire un indirizzo IP valido."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Indirizzo stampante"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Inserire l'indirizzo IP della stampante in rete."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Stampante non disponibile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "Primo disponibile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Sposta in alto"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Cancella"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Riprendi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Messa in pausa..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Ripresa in corso..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pausa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Interr. in corso..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Interrompi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Sei sicuro di voler spostare %1 all’inizio della coda?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Sposta il processo di stampa in alto"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Sei sicuro di voler cancellare %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Cancella processo di stampa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Sei sicuro di voler interrompere %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Interrompi la stampa"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "Coda di stampa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gestisci nel browser"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Non sono presenti processi di stampa nella coda. Eseguire lo slicing e inviare un processo per aggiungerne uno."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Processi di stampa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Tempo di stampa totale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "In attesa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Schema colori"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Colore materiale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Tipo di linea"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Velocità"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Spessore layer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Larghezza della linea"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Flusso"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Modalità di compatibilità"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Spostamenti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Helper"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Guscio"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Riempimento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "Avvia"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Mostra solo strati superiori"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Mostra 5 strati superiori in dettaglio"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Superiore / Inferiore"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Parete interna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "min"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "max"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Accertarsi che la stampante sia collegata:\n"
-"- Controllare se la stampante è accesa.\n"
-"- Controllare se la stampante è collegata alla rete.\n"
-"- Controllare se è stato effettuato l'accesso per rilevare le stampanti collegate al cloud."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Collegare la stampante alla rete."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Altezza (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Visualizza i manuali utente online"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "La distanza massima di ciascun pixel da \"Base.\""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Al fine di monitorare la stampa da Cura, collegare la stampante."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Alcune parti potrebbero risultare problematiche in questa stampa. Fare click per visualizzare i suggerimenti per la regolazione."
+msgid "The base height from the build plate in millimeters."
+msgstr "L'altezza della base dal piano di stampa in millimetri."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Larghezza (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Visualizzazione 3D"
+msgid "The width in millimeters on the build plate"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profondità (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Visualizzazione frontale"
+msgid "The depth in millimeters on the build plate"
+msgstr "La profondità in millimetri sul piano di stampa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Più scuro è più alto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Più chiaro è più alto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Visualizzazione superiore"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Per le litofanie, i pixel scuri devono corrispondere alle posizioni più spesse per bloccare maggiormente il passaggio della luce. Per le mappe con altezze superiori, i pixel più chiari indicano un terreno più elevato, quindi nel modello 3D generato i pixel più chiari devono corrispondere alle posizioni più spesse."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Lineare"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Traslucenza"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Vista sinistra"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Per le litofanie, è disponibile un semplice modello logaritmico per la traslucenza. Per le mappe delle altezze, i valori in pixel corrispondono alle altezze in modo lineare."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Trasmittanza di 1 mm (%)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Vista destra"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Percentuale di luce che penetra una stampa dello spessore di 1 millimetro. Se questo valore si riduce, il contrasto nelle aree scure dell'immagine aumenta, mentre il contrasto nelle aree chiare dell'immagine diminuisce."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Elenco oggetti"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Smoothing"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "La quantità di smoothing (levigatura) da applicare all'immagine."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Mercato"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&File"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Apri progetto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Modifica"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Aggiorna esistente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Visualizza"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Crea nuovo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Impostazioni"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Riepilogo - Progetto Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Es&tensioni"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Come può essere risolto il conflitto nella macchina?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&referenze"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Impostazioni della stampante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Help"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tipo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nuovo progetto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Gruppo stampanti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Sei sicuro di voler aprire un nuovo progetto? Questo cancellerà il piano di stampa e tutte le impostazioni non salvate."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Come può essere risolto il conflitto nel profilo?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Sezionamento in corso..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Impostazioni profilo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Sezionamento impossibile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nome"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Non nel profilo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 override"
+msgstr[1] "%1 override"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivato da"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 override"
+msgstr[1] "%1, %2 override"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Come può essere risolto il conflitto nel materiale?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Impostazioni materiale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Impostazione visibilità"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modalità"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Impostazioni visibili:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 su %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Il caricamento di un progetto annulla tutti i modelli sul piano di stampa."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Apri"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Elaborazione in corso"
+msgid "Want more?"
+msgstr "Ulteriori informazioni?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Sezionamento"
+msgid "Backup Now"
+msgstr "Esegui backup adesso"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Avvia il processo di sezionamento"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Backup automatico"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Annulla"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Crea automaticamente un backup ogni giorno in cui viene avviata Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Stima del tempo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Versione Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Stima del materiale"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Macchine"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiali"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profili"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Nessuna stima di tempo disponibile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plugin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Nessuna stima di costo disponibile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Ripristina"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Cancella backup"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Sei sicuro di voler cancellare questo backup? Questa operazione non può essere annullata."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Ripristina backup"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Riavviare Cura prima di ripristinare il backup. Chiudere Cura adesso?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Backup e sincronizzazione delle impostazioni Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Anteprima"
+msgid "Sign in"
+msgstr "Accedi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Aggiungi una stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "I miei backup"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Nessun backup. Usare il pulsante ‘Esegui backup adesso’ per crearne uno."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Durante la fase di anteprima, saranno visibili solo 5 backup. Rimuovi un backup per vedere quelli precedenti."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Backup Cura"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Maggiori informazioni sulla raccolta di dati anonimi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura acquisisce dati anonimi per migliorare la qualità di stampa e l'esperienza dell'utente. Di seguito è riportato un esempio dei dati condivisi:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Non desidero inviare dati anonimi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Consenti l'invio di dati anonimi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Plug-in di post-elaborazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Aggiungi una stampante in rete"
+msgid "Post Processing Scripts"
+msgstr "Script di post-elaborazione"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Aggiungi uno script"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Aggiungi una stampante non in rete"
+msgid "Settings"
+msgstr "Impostazioni"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Modificare gli script di post-elaborazione attivi."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "È attivo il seguente script:"
+msgstr[1] "Sono attivi i seguenti script:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Aggiungere una stampante cloud"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Seleziona qualsiasi aggiornamento realizzato per questa Ultimaker Original"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "In attesa della risposta del cloud"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Piano di stampa riscaldato (kit ufficiale o integrato)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Livellamento del piano di stampa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Non sono presenti stampanti nel cloud?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Per assicurarsi stampe di alta qualità, è ora possibile regolare il piano di stampa. Quando si fa clic su 'Spostamento alla posizione successiva' l'ugello si sposterà in diverse posizioni che è possibile regolare."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Le seguenti stampanti del tuo account sono state aggiunte in Cura:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Per ciascuna posizione: inserire un pezzo di carta sotto l'ugello e regolare la stampa dell'altezza del piano di stampa. L'altezza del piano di stampa è corretta quando la carta sfiora la punta dell'ugello."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Avvio livellamento del piano di stampa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Spostamento alla posizione successiva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Aggiungere la stampante manualmente"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Aggiungi stampante per indirizzo IP"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Inserire l'indirizzo IP della stampante."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Aggiungi"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Impossibile connettersi al dispositivo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Chiudere %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Non è possibile effettuare la connessione alla stampante Ultimaker?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "La stampante a questo indirizzo non ha ancora risposto."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Questa stampante non può essere aggiunta perché è una stampante sconosciuta o non è l'host di un gruppo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Indietro"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Collega"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Contratto di licenza"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Rifiuta e chiudi"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Benvenuto in Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"Segui questa procedura per configurare\n"
-"Ultimaker Cura. Questa operazione richiederà solo pochi istanti."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Per iniziare"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Accedi alla piattaforma Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Aggiungi impostazioni materiale e plugin dal Marketplace"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Esegui il backup e la sincronizzazione delle impostazioni materiale e dei plugin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Condividi idee e ottieni supporto da più di 48.000 utenti nella community di Ultimaker"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Salta"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Non accetto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Crea un account Ultimaker gratuito"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Stampante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Impostazioni ugello"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Produttore"
+msgid "Nozzle size"
+msgstr "Dimensione ugello"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Autore profilo"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Nome stampante"
+msgid "Compatible material diameter"
+msgstr "Diametro del materiale compatibile"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Dare un nome alla stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Scostamento X ugello"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Non è stata trovata alcuna stampante sulla rete."
+msgid "Nozzle offset Y"
+msgstr "Scostamento Y ugello"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Aggiorna"
+msgid "Cooling Fan Number"
+msgstr "Numero ventola di raffreddamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Codice G avvio estrusore"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Codice G fine estrusore"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Impostazioni della stampante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Aggiungi stampante per IP"
+msgid "X (Width)"
+msgstr "X (Larghezza)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Aggiungere una stampante cloud"
+msgid "Y (Depth)"
+msgstr "Y (Profondità)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Ricerca e riparazione dei guasti"
+msgid "Z (Height)"
+msgstr "Z (Altezza)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Aiutaci a migliorare Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "Forma del piano di stampa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura acquisisce dati anonimi per migliorare la qualità di stampa e l'esperienza dell'utente, tra cui:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Origine al centro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Tipi di macchine"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Piano riscaldato"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Utilizzo dei materiali"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volume di stampa riscaldato"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Numero di sezionamenti"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Versione codice G"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Impostazioni di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Impostazioni della testina di stampa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "I dati acquisiti da Ultimaker Cura non conterranno alcuna informazione personale."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Ulteriori informazioni"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "Scopri le novità"
+msgid "X max"
+msgstr "X max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Vuoto"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Note sulla versione"
+msgid "Gantry Height"
+msgstr "Altezza gantry"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Numero di estrusori"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Applica offset estrusore a gcode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Codice G avvio"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Codice G fine"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "Le mie stampanti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Monitora le stampanti in Ultimaker Digital Factory."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Crea progetti di stampa in Digital Library."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Processi di stampa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Monitora i processi di stampa dalla cronologia di stampa."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Estendi Ultimaker Cura con plugin e profili del materiale."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Diventa un esperto di stampa 3D con e-learning Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Supporto Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Scopri come iniziare a utilizzare Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Fai una domanda"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Consulta la community di Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Segnala un errore"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Informa gli sviluppatori che si è verificato un errore."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Visita il sito Web Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Stampa modello selezionato con %1"
+msgstr[1] "Stampa modelli selezionati con %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Impostazioni"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nuovo progetto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Sei sicuro di voler aprire un nuovo progetto? Questo cancellerà il piano di stampa e tutte le impostazioni non salvate."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Mercato"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Piano di stampa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "La temperatura target del piano riscaldato. Il piano verrà riscaldato o raffreddato a questa temperatura. Se è 0, il riscaldamento del piano viene disattivato."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "La temperatura corrente del piano riscaldato."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "La temperatura di preriscaldo del piano."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Annulla"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Pre-riscaldo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Riscalda il piano prima della stampa. È possibile continuare a regolare la stampa durante il riscaldamento e non è necessario attendere il riscaldamento del piano quando si è pronti per la stampa."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "La stampante non è collegata."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Comando stampante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Posizione Jog"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Distanza Jog"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Invia codice G"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Invia un comando codice G personalizzato alla stampante connessa. Premere ‘invio’ per inviare il comando."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Estrusore"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Temperatura target dell'estremità riscaldata. L'estremità riscaldata si riscalderà o raffredderà sino a questo valore di temperatura. Se questo è 0, l'estremità riscaldata verrà spenta."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "La temperatura corrente di questa estremità calda."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "La temperatura di preriscaldo dell’estremità calda."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Riscalda l’estremità calda prima della stampa. È possibile continuare a regolare la stampa durante il riscaldamento e non è necessario attendere il riscaldamento dell’estremità calda quando si è pronti per la stampa."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Il colore del materiale di questo estrusore."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Il materiale di questo estrusore."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "L’ugello inserito in questo estrusore."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Apri file progetto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Questo è un file progetto Cura. Vuoi aprirlo come progetto o importarne i modelli?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Ricorda la scelta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Apri come progetto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importa i modelli"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Salva progetto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Estrusore %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & materiale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Materiale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Non mostrare il riepilogo di progetto alla ripetizione di salva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Salva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Apri file"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Rilevata la presenza di uno o più file progetto tra i file selezionati. È possibile aprire solo un file progetto alla volta. Si suggerisce di importare i modelli solo da tali file. Vuoi procedere?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Importa tutto come modelli"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Informazioni su %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versione: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Soluzione end-to-end per la stampa 3D con filamento fuso."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3764,2226 +3597,2385 @@ msgstr ""
 "Cura è stato sviluppato da Ultimaker B.V. in cooperazione con la comunità.\n"
 "Cura è orgogliosa di utilizzare i seguenti progetti open source:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interfaccia grafica utente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Struttura applicazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Generatore codice G"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Libreria di comunicazione intra-processo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Lingua di programmazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Struttura GUI"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Vincoli struttura GUI"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Libreria vincoli C/C++"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formato scambio dati"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Libreria di supporto per calcolo scientifico"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Libreria di supporto per calcolo rapido"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Libreria di supporto per gestione file STL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Libreria di supporto per gestione oggetti planari"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Libreria di supporto per gestione maglie triangolari"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Libreria di supporto per gestione file 3MF"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Libreria di supporto per metadati file e streaming"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Libreria di comunicazione seriale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Libreria scoperta ZeroConf"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Libreria ritaglio poligono"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Controllo di tipo statico per Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificati di origine per la convalida dell'affidabilità SSL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Libreria per la traccia degli errori Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Libreria di impacchettamento dei poligoni sviluppata da Prusa Research"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Vincoli Python per libnest2d"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Libreria di supporto per accesso a keyring sistema"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Estensioni Python per Microsoft Windows"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Font"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Icone SVG"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Apertura applicazione distribuzione incrociata Linux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Apri file"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Rilevata la presenza di uno o più file progetto tra i file selezionati. È possibile aprire solo un file progetto alla volta. Si suggerisce di importare i modelli solo da tali file. Vuoi procedere?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Importa tutto come modelli"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Salva progetto"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Estrusore %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & materiale"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Materiale"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Non mostrare il riepilogo di progetto alla ripetizione di salva"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Salva"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Elimina o mantieni modifiche"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"Alcune impostazioni di profilo sono state personalizzate.\n"
-"Mantenere queste impostazioni modificate dopo il cambio dei profili?\n"
-"In alternativa, è possibile eliminare le modifiche per caricare i valori predefiniti da '%1'."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Impostazioni profilo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Modifiche correnti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Chiedi sempre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Elimina e non chiedere nuovamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Mantieni e non chiedere nuovamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Elimina modifiche"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Mantieni modifiche"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Apri file progetto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "Nessun elemento da selezionare da"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Questo è un file progetto Cura. Vuoi aprirlo come progetto o importarne i modelli?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Apri file..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Ricorda la scelta"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Ap&ri recenti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Apri come progetto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Impostazioni visibili"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importa i modelli"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Comprimi tutte le categorie"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gestisci Impostazione visibilità..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "Ma&teriale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Imposta come estrusore attivo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Abilita estrusore"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Disabilita estrusore"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Preferiti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Generale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Help"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&File"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Salva progetto..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Esporta..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Esporta selezione..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&referenze"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Modifica"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "S&tampante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Stampanti abilitate per la rete"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Stampanti locali"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Es&tensioni"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configurazioni"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Stampa attiva"
+msgid "Loading available configurations from the printer..."
+msgstr "Caricamento in corso configurazioni disponibili dalla stampante..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Nome del processo"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Le configurazioni non sono disponibili perché la stampante è scollegata."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tempo di stampa"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Questa configurazione non è disponibile perché %1 non viene riconosciuto. Visitare %2 per scaricare il profilo materiale corretto."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Tempo residuo stimato"
+msgid "Marketplace"
+msgstr "Mercato"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "La stampante cloud è offline. Verificare se la stampante è accesa e collegata a Internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "La configurazione di questo estrusore non è consentita e proibisce il sezionamento."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Questa stampante non è collegata al tuo account. Visitare Ultimaker Digital Factory per stabilire una connessione."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "Nessun profilo corrispondente alla configurazione di questo estrusore."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "La connessione cloud al momento non è disponibile. Accedere per collegarsi alla stampante cloud."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Seleziona configurazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "La connessione cloud al momento non è disponibile. Verificare la connessione a Internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configurazioni"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Aggiungi stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personalizzata"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Gestione stampanti"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Stampante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Stampanti collegate"
+msgid "Enabled"
+msgstr "Abilitato"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Stampanti preimpostate"
+msgid "Material"
+msgstr "Materiale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Impostazioni di stampa"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Utilizzare la colla per una migliore adesione con questa combinazione di materiali."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Impostazione di stampa disabilitata. Il file G-code non può essere modificato."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Stampa modello selezionato con:"
+msgstr[1] "Stampa modelli selezionati con:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Moltiplica modello selezionato"
+msgstr[1] "Moltiplica modelli selezionati"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profilo"
+msgid "Number of Copies"
+msgstr "Numero di copie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Salva progetto..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Visualizza"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Posizione fotocamera"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Visualizzazione fotocamera"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Prospettiva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Ortogonale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Visualizza tipo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Accedi alla piattaforma Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Alcuni valori di impostazione/esclusione sono diversi dai valori memorizzati nel profilo.\n"
-"\n"
-"Fare clic per aprire la gestione profili."
+"- Aggiungi profili materiale e plugin dal Marketplace\n"
+"- Esegui il backup e la sincronizzazione dei profili materiale e dei plugin\n"
+"- Condividi idee e ottieni supporto da più di 48.000 utenti nella community di Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Profili personalizzati"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Crea un account Ultimaker gratuito"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Elimina le modifiche correnti"
+msgid "Sign in"
+msgstr "Accedi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Ultimo aggiornamento: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Consigliata"
+msgid "Ultimaker Account"
+msgstr "Account Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Personalizzata"
+msgid "Sign Out"
+msgstr "Esci"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Verifica in corso..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Account sincronizzato"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Si è verificato un errore..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Installare gli aggiornamenti in attesa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Verificare gli aggiornamenti dell'account"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Sezionamento in corso..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Sezionamento impossibile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Elaborazione in corso"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Sezionamento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Avvia il processo di sezionamento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Annulla"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Stima del tempo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Stima del materiale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Nessuna stima di tempo disponibile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Nessuna stima di costo disponibile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Anteprima"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Questo pacchetto sarà installato dopo il riavvio."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Generale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Impostazioni"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Stampanti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiali"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profili"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Chiusura di %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Chiudere %1?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Installa il pacchetto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Apri file"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Rilevata la presenza di uno o più file codice G tra i file selezionati. È possibile aprire solo un file codice G alla volta. Se desideri aprire un file codice G, selezionane uno solo."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Aggiungi stampante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Scopri le novità"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Inserita"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Disinserita"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Sperimentale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Impostazioni di stampa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Impostazione di stampa disabilitata. Il file G-code non può essere modificato."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Consigliata"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personalizzata"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "Non esiste alcun profilo %1 per la configurazione nelle estrusore %2. In alternativa verrà utilizzato lo scopo predefinito"
 msgstr[1] "Non esiste alcun profilo %1 per le configurazioni negli estrusori %2. In alternativa verrà utilizzato lo scopo predefinito"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profili"
+msgid "Gradual infill"
+msgstr "Riempimento graduale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Sono state modificate alcune impostazioni del profilo. Per modificarle, andare alla modalità personalizzata."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Un riempimento graduale aumenterà gradualmente la quantità di riempimento verso l'alto."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Supporto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Genera strutture per supportare le parti del modello a sbalzo. Senza queste strutture, queste parti collasserebbero durante la stampa."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Riempimento graduale"
+msgid "Profiles"
+msgstr "Profili"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Un riempimento graduale aumenterà gradualmente la quantità di riempimento verso l'alto."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Sono state modificate alcune impostazioni del profilo. Per modificarle, andare alla modalità personalizzata."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Adesione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Abilita stampa di brim o raft. Questa funzione aggiunge un’area piana attorno o sotto l’oggetto, facile da tagliare successivamente."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Salva progetto..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Profili personalizzati"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Stampanti abilitate per la rete"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Elimina le modifiche correnti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Stampanti locali"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profilo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiale"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Alcuni valori di impostazione/esclusione sono diversi dai valori memorizzati nel profilo.\n"
+"\n"
+"Fare clic per aprire la gestione profili."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Preferiti"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Impostazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Generale"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profilo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Stampa modello selezionato con:"
-msgstr[1] "Stampa modelli selezionati con:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Corrente"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Moltiplica modello selezionato"
-msgstr[1] "Moltiplica modelli selezionati"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Numero di copie"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Salva progetto..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Esporta..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Esporta selezione..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Impostazione visibilità"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configurazioni"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personalizzata"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Controlla tutto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Attiva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Rinomina"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Conferma modifica diametro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Il nuovo diametro del filamento impostato a %1 mm non è compatibile con l'attuale estrusore. Continuare?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Stampante"
+msgid "Display Name"
+msgstr "Visualizza nome"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Abilitato"
+msgid "Brand"
+msgstr "Marchio"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiale"
+msgid "Material Type"
+msgstr "Tipo di materiale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Utilizzare la colla per una migliore adesione con questa combinazione di materiali."
+msgid "Color"
+msgstr "Colore"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "La configurazione di questo estrusore non è consentita e proibisce il sezionamento."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "Nessun profilo corrispondente alla configurazione di questo estrusore."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Proprietà"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Seleziona configurazione"
+msgid "Density"
+msgstr "Densità"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configurazioni"
+msgid "Diameter"
+msgstr "Diametro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Caricamento in corso configurazioni disponibili dalla stampante..."
+msgid "Filament Cost"
+msgstr "Costo del filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Le configurazioni non sono disponibili perché la stampante è scollegata."
+msgid "Filament weight"
+msgstr "Peso del filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Questa configurazione non è disponibile perché %1 non viene riconosciuto. Visitare %2 per scaricare il profilo materiale corretto."
+msgid "Filament length"
+msgstr "Lunghezza del filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Mercato"
+msgid "Cost per Meter"
+msgstr "Costo al metro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Apri file..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Questo materiale è collegato a %1 e condivide alcune delle sue proprietà."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "S&tampante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Scollega materiale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "Ma&teriale"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Descrizione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Imposta come estrusore attivo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informazioni sull’aderenza"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Abilita estrusore"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Informazioni"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Disabilita estrusore"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Sincronizza materiali con stampanti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Ap&ri recenti"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Sincronizza materiali con stampanti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Impostazioni visibili"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "Seguendo alcuni semplici passaggi, sarà possibile sincronizzare tutti i profili del materiale con le stampanti."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Comprimi tutte le categorie"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "Cosa occorre per sincronizzare i profili del materiale?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gestisci Impostazione visibilità..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Avvio"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Posizione fotocamera"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Accedi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Visualizzazione fotocamera"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Per sincronizzare automaticamente i profili del materiale con tutte le stampanti collegate a Digital Factory è necessario aver effettuato l'accesso a Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Prospettiva"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Sincronizza materiali con USB"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortogonale"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "Le stampanti seguenti riceveranno i nuovi profili del materiale:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "P&iano di stampa"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "Si è verificato un errore durante l'invio di materiali alle stampanti."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Visualizza tipo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "I profili del materiale sono stati sincronizzati correttamente con le stampanti seguenti:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Viene stampato come supporto."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Ricerca e riparazione dei guasti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Gli altri modelli che si sovrappongono a questo modello sono stati modificati."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "Mancano stampanti?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "La sovrapposizione del riempimento con questo modello è stata modificata."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Accertarsi che tutte le stampanti siano accese e collegate a Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Le sovrapposizioni con questo modello non sono supportate."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Aggiorna elenco"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Ignora %1 impostazione."
-msgstr[1] "Ignora %1 impostazioni."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Riprova"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profili"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Eseguito"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Attiva"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Sincronizza"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Crea"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "Sincronizzazione"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "Nessuna stampante trovata"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Nessuna stampante compatibile collegata a Digital Factory. Accertarsi che la stampante sia collegata e che il firmware più recente sia in esecuzione."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Scopri come collegare la stampante a Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Aggiorna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Sincronizza profili del materiale tramite USB"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Eseguire le operazioni descritte di seguito per caricare nuovi profili del materiale nella stampante."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Fare clic sul pulsante Esporta archivio materiali."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "Salvare il file .umm su una chiavetta USB."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "Inserire la chiavetta USB nella stampante e avviare la procedura per caricare nuovi profili del materiale."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Come caricare nuovi profili del materiale nella stampante"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Indietro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Esporta archivio materiali"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Esporta tutti i materiali"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplica"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Rinomina"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Importa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Esporta"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Crea profilo"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Indica un nome per questo profilo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplica profilo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Esporta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Conferma rimozione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Sei sicuro di voler rimuovere %1? Questa operazione non può essere annullata!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Rinomina profilo"
+msgid "Import Material"
+msgstr "Importa materiale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importa profilo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Materiale importato correttamente <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Impossibile importare materiale <filename>{1}</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Esporta profilo"
+msgid "Export Material"
+msgstr "Esporta materiale"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Impossibile esportare il materiale su <filename>%1</filename>: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Materiale esportato correttamente su <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Stampante: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Aggiorna il profilo con le impostazioni/esclusioni correnti"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Questo profilo utilizza le impostazioni predefinite dalla stampante, perciò non ci sono impostazioni/esclusioni nell’elenco riportato di seguito."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Le impostazioni correnti corrispondono al profilo selezionato."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Impostazioni globali"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Generale"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Crea profilo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Indica un nome per questo profilo."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Esporta profilo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplica profilo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Rinomina profilo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importa profilo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interfaccia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Valuta:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Tema:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Riavviare l'applicazione per rendere effettive le modifiche."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Seziona automaticamente alla modifica delle impostazioni."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Seziona automaticamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportamento del riquadro di visualizzazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Evidenzia in rosso le zone non supportate del modello. In assenza di supporto, queste aree non saranno stampate in modo corretto."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Visualizza sbalzo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Evidenziare le superfici mancanti o estranee del modello utilizzando i simboli di avvertenza. I percorsi degli utensili spesso ignoreranno parti della geometria prevista."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Visualizzare gli errori del modello"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Sposta la fotocamera in modo che il modello si trovi al centro della visualizzazione quando è selezionato"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centratura fotocamera alla selezione dell'elemento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Il comportamento dello zoom predefinito di Cura dovrebbe essere invertito?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverti la direzione dello zoom della fotocamera."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Lo zoom si muove nella direzione del mouse?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Nella prospettiva ortogonale lo zoom verso la direzione del mouse non è supportato."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoom verso la direzione del mouse"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "I modelli sull’area di stampa devono essere spostati per evitare intersezioni?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Assicurarsi che i modelli siano mantenuti separati"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "I modelli sull’area di stampa devono essere portati a contatto del piano di stampa?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Rilascia automaticamente i modelli sul piano di stampa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Visualizza il messaggio di avvertimento sul lettore codice G."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Messaggio di avvertimento sul lettore codice G"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Lo strato deve essere forzato in modalità di compatibilità?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forzare la modalità di compatibilità visualizzazione strato (riavvio necessario)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Aprire Cura nel punto in cui è stato chiuso?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Ripristinare la posizione della finestra all'avvio"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Quale tipo di rendering della fotocamera è necessario utilizzare?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Rendering fotocamera:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Prospettiva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Ortogonale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Apertura e salvataggio file"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "L'apertura dei file dal desktop o da applicazioni esterne deve essere eseguita nella stessa istanza di Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Utilizzare una singola istanza di Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "È necessario pulire il piano di stampa prima di caricare un nuovo modello nella singola istanza di Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Pulire il piano di stampa prima di caricare il modello nella singola istanza"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "I modelli devono essere ridimensionati al volume di stampa, se troppo grandi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Ridimensiona i modelli troppo grandi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Un modello può apparire eccessivamente piccolo se la sua unità di misura è espressa in metri anziché in millimetri. Questi modelli devono essere aumentati?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Ridimensiona i modelli eccessivamente piccoli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "I modelli devono essere selezionati dopo essere stati caricati?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Selezionare i modelli dopo il caricamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Al nome del processo di stampa deve essere aggiunto automaticamente un prefisso basato sul nome della stampante?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Aggiungi al nome del processo un prefisso macchina"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Quando si salva un file di progetto deve essere visualizzato un riepilogo?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Visualizza una finestra di riepilogo quando si salva un progetto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportamento predefinito all'apertura di un file progetto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportamento predefinito all'apertura di un file progetto: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Chiedi sempre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Apri sempre come progetto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Importa sempre i modelli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Dopo aver modificato un profilo ed essere passati a un altro, si apre una finestra di dialogo che chiede se mantenere o eliminare le modifiche oppure se scegliere un comportamento predefinito e non visualizzare più tale finestra di dialogo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportamento predefinito per i valori di impostazione modificati al passaggio a un profilo diverso: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Elimina sempre le impostazioni modificate"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Trasferisci sempre le impostazioni modificate a un nuovo profilo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "I dati anonimi sulla stampa devono essere inviati a Ultimaker? Nota, non sono trasmessi o memorizzati modelli, indirizzi IP o altre informazioni personali."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Invia informazioni di stampa (anonime)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Ulteriori informazioni"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Aggiornamenti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura deve verificare la presenza di eventuali aggiornamenti all’avvio del programma?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Controlla aggiornamenti all’avvio"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "Quando si verifica la presenza di aggiornamenti, cercare solo versioni stabili."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Solo versioni stabili"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "Quando si verifica la presenza di aggiornamenti, cercare versioni stabili e beta."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "Versioni stabili e beta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "È necessario verificare automaticamente la presenza di nuovi plugin ad ogni avvio di Cura? Si consiglia di non disabilitare questa opzione!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Ricevi notifiche di aggiornamenti plugin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informazioni"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Aggiungi stampante per indirizzo IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Conferma modifica diametro"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Inserire l'indirizzo IP della stampante."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Il nuovo diametro del filamento impostato a %1 mm non è compatibile con l'attuale estrusore. Continuare?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Aggiungi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Visualizza nome"
+msgid "Could not connect to device."
+msgstr "Impossibile connettersi al dispositivo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Tipo di materiale"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Non è possibile effettuare la connessione alla stampante Ultimaker?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Colore"
+msgid "The printer at this address has not responded yet."
+msgstr "La stampante a questo indirizzo non ha ancora risposto."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Proprietà"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Questa stampante non può essere aggiunta perché è una stampante sconosciuta o non è l'host di un gruppo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densità"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Collega"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Diametro"
+msgid "Release Notes"
+msgstr "Note sulla versione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Costo del filamento"
+msgid "User Agreement"
+msgstr "Contratto di licenza"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Peso del filamento"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Accetta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Lunghezza del filamento"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Rifiuta e chiudi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Costo al metro"
+msgid "What's New"
+msgstr "Scopri le novità"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Avanti"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Questo materiale è collegato a %1 e condivide alcune delle sue proprietà."
+msgid "Add a Cloud printer"
+msgstr "Aggiungere una stampante cloud"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Scollega materiale"
+msgid "Waiting for Cloud response"
+msgstr "In attesa della risposta del cloud"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Descrizione"
+msgid "No printers found in your account?"
+msgstr "Non sono presenti stampanti nel cloud?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informazioni sull’aderenza"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Le seguenti stampanti del tuo account sono state aggiunte in Cura:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Crea"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Aggiungere la stampante manualmente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplica"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Aggiungi impostazioni materiale e plugin dal Marketplace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Sincronizza con le stampanti"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Esegui il backup e la sincronizzazione delle impostazioni materiale e dei plugin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Condividi idee e ottieni supporto da più di 48.000 utenti nella community di Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importa materiale"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Salta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Impossibile importare materiale <filename>{1}</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Crea un account Ultimaker gratuito"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Materiale importato correttamente <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Benvenuto in Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Esporta materiale"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"Segui questa procedura per configurare\n"
+"Ultimaker Cura. Questa operazione richiederà solo pochi istanti."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Impossibile esportare il materiale su <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Per iniziare"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Materiale esportato correttamente su <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vuoto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Sincronizza materiali con stampanti"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Produttore"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Sincronizza materiali con stampanti"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autore profilo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "Seguendo alcuni semplici passaggi, sarà possibile sincronizzare tutti i profili del materiale con le stampanti."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nome stampante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Avvio"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Dare un nome alla stampante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "Cosa occorre per sincronizzare i profili del materiale?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Aggiungi una stampante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Accedi"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Aggiungi una stampante in rete"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Per sincronizzare automaticamente i profili del materiale con tutte le stampanti collegate a Digital Factory è necessario aver effettuato l'accesso a Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Aggiungi una stampante non in rete"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Sincronizza materiali con USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Non è stata trovata alcuna stampante sulla rete."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "Le stampanti seguenti riceveranno i nuovi profili del materiale:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Aggiorna"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "Si è verificato un errore durante l'invio di materiali alle stampanti."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Aggiungi stampante per IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "I profili del materiale sono stati sincronizzati correttamente con le stampanti seguenti:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Aggiungere una stampante cloud"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Ricerca e riparazione dei guasti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "Mancano stampanti?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Aiutaci a migliorare Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Accertarsi che tutte le stampanti siano accese e collegate a Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Aggiorna elenco"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Riprova"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Eseguito"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura acquisisce dati anonimi per migliorare la qualità di stampa e l'esperienza dell'utente, tra cui:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Sincronizza"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Tipi di macchine"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "Sincronizzazione"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Utilizzo dei materiali"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "Nessuna stampante trovata"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Numero di sezionamenti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Nessuna stampante compatibile collegata a Digital Factory. Accertarsi che la stampante sia collegata e che il firmware più recente sia in esecuzione."
+msgid "Print settings"
+msgstr "Impostazioni di stampa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Scopri come collegare la stampante a Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "I dati acquisiti da Ultimaker Cura non conterranno alcuna informazione personale."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Aggiorna"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Ulteriori informazioni"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Sincronizza profili del materiale tramite USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Elenco oggetti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Eseguire le operazioni descritte di seguito per caricare nuovi profili del materiale nella stampante."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "Viene stampato come supporto."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Fare clic sul pulsante Esporta archivio materiali."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "Gli altri modelli che si sovrappongono a questo modello sono stati modificati."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "Salvare il file .umm su una chiavetta USB."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "La sovrapposizione del riempimento con questo modello è stata modificata."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "Inserire la chiavetta USB nella stampante e avviare la procedura per caricare nuovi profili del materiale."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "Le sovrapposizioni con questo modello non sono supportate."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Come caricare nuovi profili del materiale nella stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Ignora %1 impostazione."
+msgstr[1] "Ignora %1 impostazioni."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Esporta archivio materiali"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Stampanti collegate"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Esporta tutti i materiali"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Stampanti preimpostate"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Impostazione visibilità"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "La stampante cloud è offline. Verificare se la stampante è accesa e collegata a Internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Controlla tutto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Questa stampante non è collegata al tuo account. Visitare Ultimaker Digital Factory per stabilire una connessione."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Stampanti"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "La connessione cloud al momento non è disponibile. Accedere per collegarsi alla stampante cloud."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calcolato"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "La connessione cloud al momento non è disponibile. Verificare la connessione a Internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Impostazione"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Aggiungi stampante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profilo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Gestione stampanti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Corrente"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unità"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Senza titolo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Non collegato ad una stampante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "La stampante non accetta comandi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "In manutenzione. Controllare la stampante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Persa connessione con la stampante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Stampa in corso..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "In pausa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Preparazione in corso..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Rimuovere la stampa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Interrompi la stampa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Sei sicuro di voler interrompere la stampa?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Stampa modello selezionato con %1"
-msgstr[1] "Stampa modelli selezionati con %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "Le mie stampanti"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Monitora le stampanti in Ultimaker Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Crea progetti di stampa in Digital Library."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Processi di stampa"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Monitora i processi di stampa dalla cronologia di stampa."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Estendi Ultimaker Cura con plugin e profili del materiale."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Diventa un esperto di stampa 3D con e-learning Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Supporto Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Alcune impostazioni nascoste utilizzano valori diversi dal proprio valore normale calcolato.\n"
+"\n"
+"Fare clic per rendere visibili queste impostazioni."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Scopri come iniziare a utilizzare Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Impostazioni ricerca"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Fai una domanda"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copia valore su tutti gli estrusori"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Consulta la community di Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copia tutti i valori modificati su tutti gli estrusori"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Segnala un errore"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Nascondi questa impostazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Informa gli sviluppatori che si è verificato un errore."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Nascondi questa impostazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Visita il sito Web Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Mantieni visibile questa impostazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Comando stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configura visibilità delle impostazioni..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Posizione Jog"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Questa impostazione non è utilizzata perché tutte le impostazioni che influenza sono sottoposte a override."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Influisce su"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Influenzato da"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Distanza Jog"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Questa impostazione è sempre condivisa tra tutti gli estrusori. La sua modifica varierà il valore per tutti gli estrusori."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Invia codice G"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Invia un comando codice G personalizzato alla stampante connessa. Premere ‘invio’ per inviare il comando."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Questa impostazione viene risolta dai valori in conflitto specifici dell'estrusore:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Estrusore"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Temperatura target dell'estremità riscaldata. L'estremità riscaldata si riscalderà o raffredderà sino a questo valore di temperatura. Se questo è 0, l'estremità riscaldata verrà spenta."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "La temperatura corrente di questa estremità calda."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "La temperatura di preriscaldo dell’estremità calda."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Annulla"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Pre-riscaldo"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Riscalda l’estremità calda prima della stampa. È possibile continuare a regolare la stampa durante il riscaldamento e non è necessario attendere il riscaldamento dell’estremità calda quando si è pronti per la stampa."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Il colore del materiale di questo estrusore."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Il materiale di questo estrusore."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "L’ugello inserito in questo estrusore."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "La stampante non è collegata."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Questa impostazione ha un valore diverso dal profilo.\n"
+"\n"
+"Fare clic per ripristinare il valore del profilo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Piano di stampa"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "La temperatura target del piano riscaldato. Il piano verrà riscaldato o raffreddato a questa temperatura. Se è 0, il riscaldamento del piano viene disattivato."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "La temperatura corrente del piano riscaldato."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "La temperatura di preriscaldo del piano."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Riscalda il piano prima della stampa. È possibile continuare a regolare la stampa durante il riscaldamento e non è necessario attendere il riscaldamento del piano quando si è pronti per la stampa."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Accedi"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Aggiungi profili materiale e plugin dal Marketplace\n"
-"- Esegui il backup e la sincronizzazione dei profili materiale e dei plugin\n"
-"- Condividi idee e ottieni supporto da più di 48.000 utenti nella community di Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Crea un account Ultimaker gratuito"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Ultimo aggiornamento: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Account Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Esci"
+"Questa impostazione normalmente viene calcolata, ma attualmente ha impostato un valore assoluto.\n"
+"\n"
+"Fare clic per ripristinare il valore calcolato."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Verifica in corso..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Account sincronizzato"
+msgid "Active print"
+msgstr "Stampa attiva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Si è verificato un errore..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Installare gli aggiornamenti in attesa"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Verificare gli aggiornamenti dell'account"
+msgid "Job Name"
+msgstr "Nome del processo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Senza titolo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tempo di stampa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "Nessun elemento da selezionare da"
+msgid "Estimated time left"
+msgstr "Tempo residuo stimato"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mostra la Guida ricerca e riparazione dei guasti online"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Attiva/disattiva schermo intero"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Esci da schermo intero"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Annulla"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "Ri&peti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Esci"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "Visualizzazione 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Visualizzazione frontale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Visualizzazione superiore"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Vista inferiore"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Visualizzazione lato sinistro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Visualizzazione lato destro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Configura Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Aggiungi stampante..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Gestione stampanti..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Gestione materiali..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Aggiungere altri materiali da Marketplace"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Aggiorna il profilo con le impostazioni/esclusioni correnti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Elimina le modifiche correnti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&Crea profilo dalle impostazioni/esclusioni correnti..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Gestione profili..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Mostra documentazione &online"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Se&gnala un errore"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Scopri le novità"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Informazioni..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Cancella selezionati"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Centra selezionati"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Moltiplica selezionati"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Elimina modello"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "C&entra modello su piattaforma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "&Raggruppa modelli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Separa modelli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "&Unisci modelli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "Mo&ltiplica modello..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Seleziona tutti i modelli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Cancellare piano di stampa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Ricarica tutti i modelli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Sistema tutti i modelli su tutti i piani di stampa"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Sistema tutti i modelli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Sistema selezione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Reimposta tutte le posizioni dei modelli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Reimposta tutte le trasformazioni dei modelli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Apri file..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Nuovo Progetto..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Mostra cartella di configurazione"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configura visibilità delle impostazioni..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Mercato"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Questa impostazione non è utilizzata perché tutte le impostazioni che influenza sono sottoposte a override."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Influisce su"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Influenzato da"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Questa impostazione è sempre condivisa tra tutti gli estrusori. La sua modifica varierà il valore per tutti gli estrusori."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Questa impostazione viene risolta dai valori in conflitto specifici dell'estrusore:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Questa impostazione ha un valore diverso dal profilo.\n"
-"\n"
-"Fare clic per ripristinare il valore del profilo."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Questa impostazione normalmente viene calcolata, ma attualmente ha impostato un valore assoluto.\n"
-"\n"
-"Fare clic per ripristinare il valore calcolato."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Impostazioni ricerca"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copia valore su tutti gli estrusori"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copia tutti i valori modificati su tutti gli estrusori"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Nascondi questa impostazione"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Nascondi questa impostazione"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Mantieni visibile questa impostazione"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Alcune impostazioni nascoste utilizzano valori diversi dal proprio valore normale calcolato.\n"
-"\n"
-"Fare clic per rendere visibili queste impostazioni."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Questo pacchetto sarà installato dopo il riavvio."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Impostazioni"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Chiusura di %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Chiudere %1?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Installa il pacchetto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Visualizzazione 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Apri file"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Visualizzazione frontale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Rilevata la presenza di uno o più file codice G tra i file selezionati. È possibile aprire solo un file codice G alla volta. Se desideri aprire un file codice G, selezionane uno solo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Visualizzazione superiore"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Aggiungi stampante"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Vista sinistra"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Scopri le novità"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Vista destra"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Fornisce le impostazioni per modello."
+msgid "Provides a prepare stage in Cura."
+msgstr "Fornisce una fase di preparazione in Cura."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Utilità impostazioni per modello"
+msgid "Prepare Stage"
+msgstr "Fase di preparazione"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Fornisce supporto per l'importazione dei profili Cura."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Fornisce supporto per l'esportazione dei profili Cura."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Lettore profilo Cura"
+msgid "Cura Profile Writer"
+msgstr "Writer profilo Cura"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Fornisce il supporto per la lettura di file X3D."
+msgid "Provides support for reading model files."
+msgstr "Fornisce supporto per la lettura dei file modello."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "Lettore X3D"
+msgid "Trimesh Reader"
+msgstr "Trimesh Reader"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Effettua il backup o ripristina la configurazione."
+msgid "Checks for firmware updates."
+msgstr "Controlla disponibilità di aggiornamenti firmware."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Backup Cura"
+msgid "Firmware Update Checker"
+msgstr "Controllo aggiornamento firmware"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Fornisce un modo per modificare le impostazioni della macchina (come il volume di stampa, la dimensione ugello, ecc.)"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Registra determinati eventi in modo che possano essere utilizzati dal segnalatore dei crash"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Azione Impostazioni macchina"
+msgid "Sentry Logger"
+msgstr "Logger sentinella"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Crea una maglia di cancellazione per bloccare la stampa del supporto in alcune posizioni"
+msgid "Provides a monitor stage in Cura."
+msgstr "Fornisce una fase di controllo in Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Cancellazione supporto"
+msgid "Monitor Stage"
+msgstr "Fase di controllo"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5995,105 +5987,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Plugin dispositivo di output unità rimovibile"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Fornisce azioni macchina per l’aggiornamento del firmware."
+msgid "Provides support for reading AMF files."
+msgstr "Fornisce il supporto per la lettura di file 3MF."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Aggiornamento firmware"
+msgid "AMF Reader"
+msgstr "Lettore 3MF"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Fornisce supporto per l'importazione di profili dalle versioni legacy Cura."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Fornisce il supporto per la lettura di pacchetti formato Ultimaker."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lettore legacy profilo Cura"
+msgid "UFP Reader"
+msgstr "Lettore UFP"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Fornisce il supporto per la lettura di file 3MF."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Si collega alla Digital Library, consentendo a Cura di aprire file e salvare file in Digital Library."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Lettore 3MF"
+msgid "Ultimaker Digital Library"
+msgstr "Ultimaker Digital Library"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Fornisce il supporto per la scrittura di pacchetti formato Ultimaker."
+msgid "Provides the Per Model Settings."
+msgstr "Fornisce le impostazioni per modello."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "Writer UFP"
+msgid "Per Model Settings Tool"
+msgstr "Utilità impostazioni per modello"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Registra determinati eventi in modo che possano essere utilizzati dal segnalatore dei crash"
+msgid "Provides a machine actions for updating firmware."
+msgstr "Fornisce azioni macchina per l’aggiornamento del firmware."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Logger sentinella"
+msgid "Firmware Updater"
+msgstr "Aggiornamento firmware"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Fornisce supporto per l'importazione di profili da file G-Code."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Gestisce le connessioni di rete alle stampanti Ultimaker in rete."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Lettore profilo codice G"
+msgid "Ultimaker Network Connection"
+msgstr "Connessione di rete Ultimaker"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Fornisce una fase di anteprima in Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Controlla i modelli e la configurazione di stampa per eventuali problematiche di stampa e suggerimenti."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Fase di anteprima"
+msgid "Model Checker"
+msgstr "Controllo modello"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Fornisce la vista a raggi X."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Vista ai raggi X"
+msgid "Simulation View"
+msgstr "Vista simulazione"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Fornisce il collegamento al back-end di sezionamento CuraEngine."
+msgid "Writes g-code to a file."
+msgstr "Scrive il codice G in un file."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Back-end CuraEngine"
+msgid "G-code Writer"
+msgstr "Writer codice G"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Fornisce il supporto per la lettura di file 3MF."
+msgid "Provides support for writing 3MF files."
+msgstr "Fornisce il supporto per la scrittura di file 3MF."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Lettore 3MF"
+msgid "3MF Writer"
+msgstr "Writer 3MF"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6105,175 +6097,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Lettore codice G compresso"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Estensione che consente la post-elaborazione degli script creati da utente"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Offre la possibilità di leggere e scrivere profili di materiali basati su XML."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Post-elaborazione"
+msgid "Material Profiles"
+msgstr "Profili del materiale"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Fornisce supporto per l'esportazione dei profili Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Fornisce il collegamento al back-end di sezionamento CuraEngine."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Writer profilo Cura"
+msgid "CuraEngine Backend"
+msgstr "Back-end CuraEngine"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Accetta i G-Code e li invia ad una stampante. I plugin possono anche aggiornare il firmware."
+msgid "Provides support for reading X3D files."
+msgstr "Fornisce il supporto per la lettura di file X3D."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Stampa USB"
+msgid "X3D Reader"
+msgstr "Lettore X3D"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Fornisce una fase di preparazione in Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Abilita la possibilità di generare geometria stampabile da file immagine 2D."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Fase di preparazione"
+msgid "Image Reader"
+msgstr "Lettore di immagine"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Consente il caricamento e la visualizzazione dei file codice G."
+msgid "Provides support for reading 3MF files."
+msgstr "Fornisce il supporto per la lettura di file 3MF."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Lettore codice G"
+msgid "3MF Reader"
+msgstr "Lettore 3MF"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Abilita la possibilità di generare geometria stampabile da file immagine 2D."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Fornisce il supporto per la scrittura di pacchetti formato Ultimaker."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Lettore di immagine"
+msgid "UFP Writer"
+msgstr "Writer UFP"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Fornisce azioni macchina per le macchine Ultimaker (come la procedura guidata di livellamento del piano di stampa, la selezione degli aggiornamenti, ecc.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Fornisce supporto per l'importazione di profili dalle versioni legacy Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Azioni della macchina Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lettore legacy profilo Cura"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Scrive il codice G in un archivio compresso."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Aggiorna le configurazioni da Cura 4.3 a Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Writer codice G compresso"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Aggiornamento della versione da 4.3 a 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Controlla disponibilità di aggiornamenti firmware."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Aggiorna le configurazioni da Cura 2.1 a Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Controllo aggiornamento firmware"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Aggiornamento della versione da 2.1 a 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Invia informazioni su sezionamento anonime Può essere disabilitato tramite le preferenze."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Aggiorna le configurazioni da Cura 4.1 a Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informazioni su sezionamento"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Aggiornamento della versione da 4.1 a 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Offre la possibilità di leggere e scrivere profili di materiali basati su XML."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Profili del materiale"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Si collega alla Digital Library, consentendo a Cura di aprire file e salvare file in Digital Library."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Aggiorna le configurazioni da Cura 4.5 a Cura 4.6."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Ultimaker Digital Library"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Aggiornamento della versione da 4.5 a 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Trova, gestisce ed installa nuovi pacchetti Cura."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Aggiorna le configurazioni da Cura 3.3 a Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Casella degli strumenti"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Aggiornamento della versione da 3.3 a 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Scrive il codice G in un file."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Aggiorna le configurazioni da Cura 4.8 a Cura 4.9."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Writer codice G"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "Aggiornamento della versione da 4.8 a 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Fornisce la vista di simulazione."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Aggiorna le configurazioni da Cura 2.7 a Cura 3.0."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Vista simulazione"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Aggiornamento della versione da 2.7 a 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Aggiorna le configurazioni da Cura 4.5 a Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Aggiorna le configurazioni da Cura 4.4 a Cura 4.5."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Aggiornamento della versione da 4.5 a 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Aggiornamento della versione da 4.4 a 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Aggiorna le configurazioni da Cura 2.5 a Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Aggiorna le configurazioni da Cura 3.0 a Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Aggiornamento della versione da 2.5 a 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Aggiornamento della versione da 3.0 a 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6285,115 +6277,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "Aggiornamento versione da 4.6.0 a 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Aggiorna le configurazioni da Cura 4.7 a Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Aggiorna le configurazioni da Cura 2.6 a Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Aggiornamento della versione da 4.7 a 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Aggiornamento della versione da 2.6 a 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Aggiorna le configurazioni da Cura 3.4 a Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Aggiorna le configurazioni da Cura 4.2 a Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Aggiornamento della versione da 3.4 a 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Aggiornamento della versione da 4.2 a 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Aggiorna le configurazioni da Cura 2.1 a Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Aggiorna le configurazioni da Cura 4.0 a Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Aggiornamento della versione da 2.1 a 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Aggiornamento della versione da 4.0 a 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Aggiorna le configurazioni da Cura 3.2 a Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Aggiorna le configurazioni da Cura 4.6.2 a Cura 4.7."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Aggiornamento della versione da 3.2 a 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Aggiornamento versione da 4.6.2 a 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Aggiorna le configurazioni da Cura 4.8 a Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Aggiorna le configurazioni da Cura 4.9 a Cura 4.10."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "Aggiornamento della versione da 4.8 a 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "Aggiornamento della versione da 4.9 a 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Aggiorna le configurazioni da Cura 4.6.2 a Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Aggiorna le configurazioni da Cura 2.2 a Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Aggiornamento versione da 4.6.2 a 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Aggiornamento della versione da 2.2 a 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Aggiorna le configurazioni da Cura 4.2 a Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Aggiorna le configurazioni da Cura 3.2 a Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Aggiornamento della versione da 4.2 a 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Aggiornamento della versione da 3.2 a 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Aggiorna le configurazioni da Cura 4.3 a Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Aggiorna le configurazioni da Cura 2.5 a Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Aggiornamento della versione da 4.3 a 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Aggiornamento della versione da 2.5 a 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Aggiorna le configurazioni da Cura 4.9 a Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Aggiorna le configurazioni da Cura 3.5 a Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "Aggiornamento della versione da 4.9 a 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Aggiornamento della versione da 3.5 a 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Aggiorna le configurazioni da Cura 2.7 a Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Aggiorna le configurazioni da Cura 3.4 a Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Aggiornamento della versione da 2.7 a 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Aggiornamento della versione da 3.4 a 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Aggiorna le configurazioni da Cura 2.6 a Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Aggiorna le configurazioni da Cura 4.7 a Cura 4.8."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Aggiornamento della versione da 2.6 a 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Aggiornamento della versione da 4.7 a 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6405,105 +6397,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "Aggiornamento della versione da 4.11 a 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Aggiorna le configurazioni da Cura 3.3 a Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Effettua il backup o ripristina la configurazione."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Aggiornamento della versione da 3.3 a 3.4"
+msgid "Cura Backups"
+msgstr "Backup Cura"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Aggiorna le configurazioni da Cura 3.0 a Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Fornisce supporto per l'importazione dei profili Cura."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Aggiornamento della versione da 3.0 a 3.1"
+msgid "Cura Profile Reader"
+msgstr "Lettore profilo Cura"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Aggiorna le configurazioni da Cura 4.0 a Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Invia informazioni su sezionamento anonime Può essere disabilitato tramite le preferenze."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Aggiornamento della versione da 4.0 a 4.1"
+msgid "Slice info"
+msgstr "Informazioni su sezionamento"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Aggiorna le configurazioni da Cura 4.4 a Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Fornisce supporto per l'importazione di profili da file G-Code."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Aggiornamento della versione da 4.4 a 4.5"
+msgid "G-code Profile Reader"
+msgstr "Lettore profilo codice G"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Aggiorna le configurazioni da Cura 2.2 a Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "Scrive il codice G in un archivio compresso."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Aggiornamento della versione da 2.2 a 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Writer codice G compresso"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Aggiorna le configurazioni da Cura 4.1 a Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Estensione che consente la post-elaborazione degli script creati da utente"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Aggiornamento della versione da 4.1 a 4.2"
+msgid "Post Processing"
+msgstr "Post-elaborazione"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Aggiorna le configurazioni da Cura 3.5 a Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Crea una maglia di cancellazione per bloccare la stampa del supporto in alcune posizioni"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Aggiornamento della versione da 3.5 a 4.0"
+msgid "Support Eraser"
+msgstr "Cancellazione supporto"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Gestisce le connessioni di rete alle stampanti Ultimaker in rete."
+msgid "Provides a preview stage in Cura."
+msgstr "Fornisce una fase di anteprima in Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Connessione di rete Ultimaker"
+msgid "Preview Stage"
+msgstr "Fase di anteprima"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Fornisce supporto per la lettura dei file modello."
+msgid "Provides the X-Ray view."
+msgstr "Fornisce la vista a raggi X."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh Reader"
+msgid "X-Ray View"
+msgstr "Vista ai raggi X"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Fornisce il supporto per la lettura di pacchetti formato Ultimaker."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Fornisce azioni macchina per le macchine Ultimaker (come la procedura guidata di livellamento del piano di stampa, la selezione degli aggiornamenti, ecc.)"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Lettore UFP"
+msgid "Ultimaker machine actions"
+msgstr "Azioni della macchina Ultimaker"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6515,35 +6517,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Visualizzazione compatta"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Fornisce il supporto per la scrittura di file 3MF."
+msgid "Allows loading and displaying G-code files."
+msgstr "Consente il caricamento e la visualizzazione dei file codice G."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Writer 3MF"
+msgid "G-code Reader"
+msgstr "Lettore codice G"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Fornisce una fase di controllo in Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Fornisce un modo per modificare le impostazioni della macchina (come il volume di stampa, la dimensione ugello, ecc.)"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Fase di controllo"
+msgid "Machine Settings Action"
+msgstr "Azione Impostazioni macchina"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Controlla i modelli e la configurazione di stampa per eventuali problematiche di stampa e suggerimenti."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Accetta i G-Code e li invia ad una stampante. I plugin possono anche aggiornare il firmware."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Controllo modello"
+msgid "USB printing"
+msgstr "Stampa USB"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Sincronizza materiali"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "Affinché le modifiche diventino effettive, è necessario chiudere e riavviare {}."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "Sincronizzazione in corso..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Modifiche rilevate dal tuo account Ultimaker"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "Desiderate sincronizzare pacchetti materiale e software con il vostro account?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Sincronizza"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Rifiuta e rimuovi dall'account"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "Impossibile scaricare i plugin {}"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Accordo di licenza plugin"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Converti immagine..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "La larghezza in millimetri sul piano di stampa."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Mercato"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "Riavviare Cura per rendere effettive le modifiche apportate ai pacchetti."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Installazione"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Installa"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Premium"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Vai al Marketplace web"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Cerca materiali"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Compatibilità"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Macchina"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Piano di stampa"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Supporto"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Qualità"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Scheda dati tecnici"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Scheda dati di sicurezza"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Linee guida di stampa"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Sito web"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "<a href='%1'>Log in</a> deve essere installato o aggiornato"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>Acquista bobine di materiale</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Aggiorna"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Aggiornamento in corso"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Aggiornamento eseguito"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Indietro"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Plugin"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Installa"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "L'installazione sarà eseguita al riavvio"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "<a href='%1'>Log in</a> deve essere aggiornato"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Downgrade"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Disinstalla"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Contributi della comunità"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Plugin della comunità"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Materiali generici"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Recupero dei pacchetti..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Sito web"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "E-mail"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Accedere per ottenere i plugin e i materiali verificati per Ultimaker Cura Enterprise"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Versione"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Ultimo aggiornamento"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Download"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Plugin installati"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "Non è stato installato alcun plugin."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Materiali installati"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "Non è stato installato alcun materiale."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Plugin inseriti nel bundle"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Materiali inseriti nel bundle"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Impossibile connettersi al database pacchetto Cura. Verificare la connessione."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "È necessario accettare la licenza per installare il pacchetto"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Modifiche dall'account"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Rimuovi"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "Verranno aggiunti i seguenti pacchetti:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "Impossibile installare i seguenti pacchetti a causa di una versione di Cura non compatibile:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Conferma disinstalla"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Si stanno installando materiali e/o profili ancora in uso. La conferma ripristina i seguenti materiali/profili ai valori predefiniti."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Materiali"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Profili"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Conferma"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Alcune parti potrebbero risultare problematiche in questa stampa. Fare click per visualizzare i suggerimenti per la regolazione."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Libreria di supporto per gestione oggetti planari"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "Alcune impostazioni di profilo sono state personalizzate.\n"
+#~ "Mantenere queste impostazioni modificate dopo il cambio dei profili?\n"
+#~ "In alternativa, è possibile eliminare le modifiche per caricare i valori predefiniti da '%1'."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "P&iano di stampa"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Crea"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Duplica"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Stampante: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Aggiorna il profilo con le impostazioni/esclusioni correnti"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Tema:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Riavviare l'applicazione per rendere effettive le modifiche."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Ulteriori informazioni"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Crea"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Sincronizza con le stampanti"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Stampante"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Unità"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Mostra la Guida ricerca e riparazione dei guasti online"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Aggiungere altri materiali da Marketplace"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Sistema tutti i modelli su tutti i piani di stampa"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Mercato"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Trova, gestisce ed installa nuovi pacchetti Cura."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Casella degli strumenti"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Fornisce la vista di simulazione."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/it_IT/fdmextruder.def.json.po b/resources/i18n/it_IT/fdmextruder.def.json.po
index e5b21c43ed..390d4f8878 100644
--- a/resources/i18n/it_IT/fdmextruder.def.json.po
+++ b/resources/i18n/it_IT/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 14:58+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Italian\n"
diff --git a/resources/i18n/it_IT/fdmprinter.def.json.po b/resources/i18n/it_IT/fdmprinter.def.json.po
index 12c2f38a5f..880436a020 100644
--- a/resources/i18n/it_IT/fdmprinter.def.json.po
+++ b/resources/i18n/it_IT/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 14:58+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Italian <info@lionbridge.com>, Italian <info@bothof.nl>\n"
@@ -56,7 +56,9 @@ msgctxt "machine_start_gcode description"
 msgid ""
 "G-code commands to be executed at the very start - separated by \n"
 "."
-msgstr "I comandi codice G da eseguire all’avvio, separati da \n."
+msgstr ""
+"I comandi codice G da eseguire all’avvio, separati da \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
@@ -68,7 +70,9 @@ msgctxt "machine_end_gcode description"
 msgid ""
 "G-code commands to be executed at the very end - separated by \n"
 "."
-msgstr "I comandi codice G da eseguire alla fine, separati da \n."
+msgstr ""
+"I comandi codice G da eseguire alla fine, separati da \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "material_guid label"
@@ -462,8 +466,8 @@ msgstr "Poligono testina macchina e ventola"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "Una silhouette 2D della testina di stampa (cappucci ventola inclusi)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -736,6 +740,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "Il diametro della ruota che guida il materiale nel tirafilo."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Qualità"
@@ -956,6 +970,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Indica il numero delle pareti. Quando calcolato mediante lo spessore della parete, il valore viene arrotondato a numero intero."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Distanza del riempimento parete esterna"
@@ -986,14 +1050,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Ottimizzare la sequenza di stampa delle pareti in modo da ridurre il numero di retrazioni e la distanza percorsa. L'abilitazione di questa funzione porta vantaggi per la maggior parte dei pezzi; alcuni possono richiedere un maggior tempo di esecuzione; si consiglia di confrontare i tempi di stampa stimati con e senza ottimizzazione. Scegliendo la funzione brim come tipo di adesione del piano di stampa, il primo strato non viene ottimizzato."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Pareti esterne prima di quelle interne"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Quando abilitata, questa funzione stampa le pareti nell’ordine dall’esterno all’interno. In tal modo è possibile migliorare la precisione dimensionale in X e Y quando si utilizza una plastica ad alta viscosità come ABS; tuttavia può diminuire la qualità di stampa della superficie esterna, in particolare sugli sbalzi."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1006,94 +1080,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Stampa una parete supplementare ogni due strati. In questo modo il riempimento rimane catturato tra queste pareti supplementari, creando stampe più resistenti."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Compensazione di sovrapposizioni di pareti"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Compensa il flusso per le parti di una parete che viene stampata dove è già presente una parete."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Compensazione di sovrapposizioni pareti esterne"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Compensa il flusso per le parti di una parete esterna che viene stampata dove è già presente una parete."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Compensazione di sovrapposizioni pareti interne"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Compensa il flusso per le parti di una parete interna che viene stampata dove è già presente una parete."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Flusso minimo della parete"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Flusso percentuale minimo ammesso per una linea perimetrale. La compensazione di sovrapposizione pareti riduce il flusso di una parete quando si trova vicino a una parete esistente. Le pareti con un flusso inferiore a questo valore saranno sostituite da uno spostamento. Quando si utilizza questa impostazione, si deve abilitare la compensazione della sovrapposizione pareti e stampare la parete esterna prima delle pareti interne."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Preferire retrazione"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Se abilitata, la retrazione viene utilizzata al posto del combing per gli spostamenti che sostituiscono le pareti aventi un flusso inferiore alla soglia minima."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Riempimento degli interstizi tra le pareti"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Riempie gli spazi dove non è possibile inserire pareti."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "In nessun punto"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Stampa pareti sottili"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "In tutti i possibili punti"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Stampa parti del modello orizzontalmente più sottili delle dimensioni dell'ugello."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Esclusione spazi minimi"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Esclude gli spazi minimi per ridurre le gocce sull’esterno del modello."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Stampa pareti sottili"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Stampa parti del modello orizzontalmente più sottili delle dimensioni dell'ugello."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -1728,10 +1792,7 @@ msgstr "Configurazione di riempimento"
 #: fdmprinter.def.json
 msgctxt "infill_pattern description"
 msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object."
-msgstr "Configurazione del materiale di riempimento della stampa. Il riempimento a linea e a zig zag cambia direzione su strati alternati, riducendo il costo del"
-" materiale. Le configurazioni a griglia, a triangolo, tri-esagonali, cubiche, ottagonali, a quarto di cubo, incrociate e concentriche sono stampate completamente"
-" su ogni strato. Le configurazioni gyroid, cubiche, a quarto di cubo e ottagonali variano per ciascuno strato per garantire una più uniforme distribuzione"
-" della forza in ogni direzione. Il riempimento fulmine cerca di minimizzare il riempimento, supportando solo la parte superiore dell'oggetto."
+msgstr "Configurazione del materiale di riempimento della stampa. Il riempimento a linea e a zig zag cambia direzione su strati alternati, riducendo il costo del materiale. Le configurazioni a griglia, a triangolo, tri-esagonali, cubiche, ottagonali, a quarto di cubo, incrociate e concentriche sono stampate completamente su ogni strato. Le configurazioni gyroid, cubiche, a quarto di cubo e ottagonali variano per ciascuno strato per garantire una più uniforme distribuzione della forza in ogni direzione. Il riempimento fulmine cerca di minimizzare il riempimento, supportando solo la parte superiore dell'oggetto."
 
 #: fdmprinter.def.json
 msgctxt "infill_pattern option grid"
@@ -2045,8 +2106,7 @@ msgstr "Angolo eliminazione riempimento fulmine"
 #: fdmprinter.def.json
 msgctxt "lightning_infill_prune_angle description"
 msgid "The endpoints of infill lines are shortened to save on material. This setting is the angle of overhang of the endpoints of these lines."
-msgstr "I punti finali delle linee di riempimento vengono accorciati per risparmiare sul materiale. Questa impostazione è l'angolo di sbalzo dei punti finali di"
-" queste linee."
+msgstr "I punti finali delle linee di riempimento vengono accorciati per risparmiare sul materiale. Questa impostazione è l'angolo di sbalzo dei punti finali di queste linee."
 
 #: fdmprinter.def.json
 msgctxt "lightning_infill_straightening_angle label"
@@ -2056,8 +2116,7 @@ msgstr "Angolo di raddrizzatura riempimento fulmine"
 #: fdmprinter.def.json
 msgctxt "lightning_infill_straightening_angle description"
 msgid "The infill lines are straightened out to save on printing time. This is the maximum angle of overhang allowed across the length of the infill line."
-msgstr "Le linee di riempimento vengono raddrizzate per risparmiare sul tempo di stampa. Questo è l'angolo di sbalzo massimo consentito sulla lunghezza della linea"
-" di riempimento."
+msgstr "Le linee di riempimento vengono raddrizzate per risparmiare sul tempo di stampa. Questo è l'angolo di sbalzo massimo consentito sulla lunghezza della linea di riempimento."
 
 #: fdmprinter.def.json
 msgctxt "material label"
@@ -2200,6 +2259,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Per compensare la contrazione del materiale durante il raffreddamento, il modello sarà scalato con questo fattore."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Materiale cristallino"
@@ -2710,24 +2789,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "I primi strati vengono stampati più lentamente rispetto al resto del modello, per ottenere una migliore adesione al piano di stampa ed ottimizzare nel complesso la percentuale di successo delle stampe. La velocità aumenta gradualmente nel corso di esecuzione degli strati successivi."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Equalizzazione del flusso del filamento"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Stampa le linee più sottili del normale più velocemente in modo che la quantità di materiale estruso per secondo rimanga la stessa. I pezzi sottili del modello potrebbero richiedere linee stampate con una larghezza minore rispetto a quella indicata nelle impostazioni. Questa impostazione controlla le variazioni di velocità per tali linee."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Velocità massima per l’equalizzazione del flusso"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Indica la velocità di stampa massima quando si regola la velocità di stampa per equalizzare il flusso."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4465,6 +4534,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "Il treno estrusore utilizzato per la stampa dello skirt/brim/raft. Utilizzato nell’estrusione multipla."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Numero di linee dello skirt"
@@ -4629,6 +4738,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "Indica la distanza tra le linee che costituiscono la maglia superiore del raft. La distanza deve essere uguale alla larghezza delle linee, in modo tale da ottenere una superficie solida."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Spessore dello strato intermedio del raft"
@@ -5129,6 +5248,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "La deviazione massima consentita quando si riduce la risoluzione per l'impostazione Risoluzione massima. Se si aumenta questo parametro, la stampa sarà meno precisa, ma il g-code sarà più piccolo. Deviazione massima rappresenta il limite per Risoluzione massima; pertanto se le due impostazioni sono in conflitto, verrà considerata vera l'impostazione Deviazione massima."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Modalità speciali"
@@ -6423,6 +6552,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "I dettagli di piccole dimensioni sul primo layer saranno stampati a questa percentuale della velocità di stampa normale. Una stampa più lenta può aiutare in termini di adesione e precisione."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Impostazioni riga di comando"
@@ -6482,6 +6641,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matrice di rotazione da applicare al modello quando caricato dal file."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "Una silhouette 2D della testina di stampa (cappucci ventola inclusi)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Pareti esterne prima di quelle interne"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Quando abilitata, questa funzione stampa le pareti nell’ordine dall’esterno all’interno. In tal modo è possibile migliorare la precisione dimensionale in X e Y quando si utilizza una plastica ad alta viscosità come ABS; tuttavia può diminuire la qualità di stampa della superficie esterna, in particolare sugli sbalzi."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Compensazione di sovrapposizioni di pareti"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Compensa il flusso per le parti di una parete che viene stampata dove è già presente una parete."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Compensazione di sovrapposizioni pareti esterne"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Compensa il flusso per le parti di una parete esterna che viene stampata dove è già presente una parete."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Compensazione di sovrapposizioni pareti interne"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Compensa il flusso per le parti di una parete interna che viene stampata dove è già presente una parete."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Flusso minimo della parete"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Flusso percentuale minimo ammesso per una linea perimetrale. La compensazione di sovrapposizione pareti riduce il flusso di una parete quando si trova vicino a una parete esistente. Le pareti con un flusso inferiore a questo valore saranno sostituite da uno spostamento. Quando si utilizza questa impostazione, si deve abilitare la compensazione della sovrapposizione pareti e stampare la parete esterna prima delle pareti interne."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Preferire retrazione"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Se abilitata, la retrazione viene utilizzata al posto del combing per gli spostamenti che sostituiscono le pareti aventi un flusso inferiore alla soglia minima."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Riempimento degli interstizi tra le pareti"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Riempie gli spazi dove non è possibile inserire pareti."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "In nessun punto"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "In tutti i possibili punti"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Esclusione spazi minimi"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Esclude gli spazi minimi per ridurre le gocce sull’esterno del modello."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Equalizzazione del flusso del filamento"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Stampa le linee più sottili del normale più velocemente in modo che la quantità di materiale estruso per secondo rimanga la stessa. I pezzi sottili del modello potrebbero richiedere linee stampate con una larghezza minore rispetto a quella indicata nelle impostazioni. Questa impostazione controlla le variazioni di velocità per tali linee."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Velocità massima per l’equalizzazione del flusso"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Indica la velocità di stampa massima quando si regola la velocità di stampa per equalizzare il flusso."
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "I comandi codice G da eseguire all’avvio, separati da \\n."
diff --git a/resources/i18n/ja_JP/cura.po b/resources/i18n/ja_JP/cura.po
index c2e95fefa5..ac6e49d7a8 100644
--- a/resources/i18n/ja_JP/cura.po
+++ b/resources/i18n/ja_JP/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2022-01-10 11:54+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Japanese <info@lionbridge.com>, Japanese <info@bothof.nl>\n"
@@ -17,1428 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 3.0\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "ユーザーデータディレクトリからアーカイブを作成できません: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122 /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "バックアップ"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "適切なデータまたはメタデータがないのにCuraバックアップをリストアしようとしました。"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "現行バージョンより上の Cura バックアップをリストアしようとしました。"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "Curaのバックアップのリストア中に次のエラーが発生しました："
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "プリントを開始する前に、材料プロファイルをプリンターと同期させてください。"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "新しい材料がインストールされました"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "材料をプリンターと同期"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "詳しく見る"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "材料アーカイブを{}に保存できませんでした："
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "材料アーカイブの保存に失敗しました"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "不明なエラー。"
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "プリントシークエンス設定値により、ガントリーと造形物の衝突を避けるため印刷データの高さを低くしました。"
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "造形サイズ"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "{0}を取り除いてもよろしいですか？この操作は元に戻せません!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "上書きできません"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "不明"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "下のプリンターはグループの一員であるため接続できません"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "ネットワークで利用可能なプリンター"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "準備する"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Curaプロファイル"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "カスタムプロファイル"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "圧縮トライアングルメッシュを開く"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "すべてのサポートのタイプ ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "全てのファイル"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "ビジュアル"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "ビジュアルプロファイルは、優れたビジュアルと表面品質を目的としたビジュアルプロトタイプやモデルをプリントするために設計されています。"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "エンジニアリングプロファイルは、精度向上と公差の厳格対応を目的とした機能プロトタイプや最終用途部品をプリントするために設計されています。"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "ドラフト"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "ドラフトプロファイルは、プリント時間の大幅短縮を目的とした初期プロトタイプとコンセプト検証をプリントするために設計されています。"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "カスタムフィラメント"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289 /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "カスタム"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "ログインに失敗しました"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "造形物のために新しい位置を探索中"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "位置確認"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "全ての造形物の造形サイズに対し、適切な位置が確認できません"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "位置を確保できません"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "材料のアーカイブを作成してプリンターと同期するのに失敗しました。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "材料のアーカイブを読み込んでプリンターと同期するのに失敗しました。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "Digital Factoryからの応答が破損しているようです。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "Digital Factoryからの応答に重要な情報がありません。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Digital Factoryに接続して一部のプリンターと材料を同期するのに失敗しました。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Digital Factoryに接続するのに失敗しました。"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "プリンターを読み込み中..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "プレファレンスをセットアップ中..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "アクティブなプリンターを初期化中..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "プリンターマネージャーを初期化中..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "ビルドボリュームを初期化中..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "シーンをセットアップ中..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "インターフェイスを読み込み中..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "エンジンを初期化中..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "一度に一つのG-codeしか読み取れません。{0}の取り込みをスキップしました。"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809 /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "警告"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "G-codeを読み込み中は他のファイルを開くことができません。{0}の取り込みをスキップしました。"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "エラー"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "スキップ"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72 /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "閉める"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "次"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290 /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "終わる"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "追加"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "キャンセル"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "グループ #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "アウターウォール"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "インナーウォール"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "スキン"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "インフィル"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "サポートイルフィル"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "サポートインターフェイス"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "サポート"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "スカート"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "プライムタワー"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "移動"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "退却"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "他"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37 /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "リリースノートを開くことができませんでした。"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Curaを開始できません"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>申し訳ありません。Ultimaker Cura で何らかの不具合が生じています。</p></b>\n"
-"                    <p>開始時に回復不能のエラーが発生しました。不適切なファイル設定が原因の可能性があります。バックアップを実行してからリセットしてください。</p>\n"
-"                    <p>バックアップは、設定フォルダに保存されます。</p>\n"
-"                    <p>問題解決のために、このクラッシュ報告をお送りください。</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "クラッシュ報告をUltimakerに送信する"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "詳しいクラッシュ報告を表示する"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "コンフィグレーションのフォルダーを表示する"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "バックアップとリセットの設定"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "クラッシュ報告"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>致命的なエラーが発生しました。問題解決のためこのクラッシュレポートを送信してください</p></b>\n"
-"            <p>「レポート送信」ボタンを使用してバグレポートが自動的に当社サーバーに送られるようにしてください</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "システム情報"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "不明"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Curaバージョン"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Cura言語"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "OS言語"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "プラットフォーム"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qtバージョン"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQtバージョン"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "初期化されていません<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGLバージョン: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGLベンダー: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGLレンダラー: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "エラー・トレースバック"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "ログ"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "レポート送信"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "新しいサインインプロセスを開始できません。別のサインインの試行がアクティブなままになっていないか確認します。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Ultimaker アカウントサーバーに到達できません。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "ログインに失敗しました"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "指定された状態が正しくありません。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "アカウントサーバーでの認証中にタイムアウトしました。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "このアプリケーションの許可において必要な権限を与えてください。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "ログイン時に予期しないエラーが発生しました。やり直してください。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "応答を読み取れません。"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "造形データを増やす、配置する"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "造形データを配置"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "造形データを配置"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "サポート対象外"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "ノズル"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "現在利用可能な次のエクストルーダーに合わせて設定が変更されました："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "設定が更新されました"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "エクストルーダーを無効にしました"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "すでに存在するファイルです"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "<filename>{0}</filename> は既に存在します。ファイルを上書きしますか？"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459 /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "無効なファイルのURL:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "<filename>{0}</filename>にプロファイルを書き出すのに失敗しました: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "<filename>{0}</filename>にプロファイルを書き出すことに失敗しました。：ライタープラグイン失敗の報告。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "<filename>{0}</filename>にプロファイルを書き出しました"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "書き出し完了"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "<filename>{0}</filename>からプロファイルの取り込に失敗しました：{1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "プリンタを追加する前に、<filename>{0}</filename>からプロファイルの取り込はできません。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "ファイル<filename>{0}</filename>にはカスタムプロファイルがインポートされていません"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "<filename>{0}</filename>からプロファイルの取り込に失敗しました："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "このプロファイル<filename>{0}</filename>には、正しくないデータが含まれているため、インポートできません。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "<filename>{0}</filename>からプロファイルの取り込みに失敗しました："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "プロファイル{0}の取り込みが完了しました。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "ファイル{0}には、正しいプロファイルが含まれていません。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "プロファイル{0}は不特定なファイルまたは破損があります。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "カスタムプロファイル"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "プロファイルはクオリティータイプが不足しています。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "アクティブなプリンターはありません。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "プロファイルを追加できません。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "クオリティータイプ「{0}」は、現在アクティブなプリンター定義「{1}」と互換性がありません。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "警告：現在の構成ではクオリティータイプ「{0}」を使用できないため、プロファイルは表示されません。このクオリティータイプを使用できる材料/ノズルの組み合わせに切り替えてください。"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "各モデル設定"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "各モデル構成設定"
+msgid "glTF Binary"
+msgstr "glTFバイナリ"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Curaプロファイル"
+msgid "glTF Embedded JSON"
+msgstr "glTF埋め込みJSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3Dファイル"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "バックアップのリストア中にエラーが発生しました。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "バックアップ"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "バックアップのアップロード中にエラーが発生しました。"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "バックアップを作成しています..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "圧縮COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "バックアップの作成中にエラーが発生しました。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "必要なアップデートの情報にアクセスできません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "バックアップをアップロードしています..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "お使いの{machine_name}について新機能またはバグ修正が利用できる可能性があります。まだ最新のバージョンでない場合は、プリンターのファームウェアをバージョン{latest_version}に更新することを推奨します。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "バックアップのアップロードを完了しました。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "%sの新しい安定版ファームウェアが利用可能です"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "バックアップが最大ファイルサイズを超えています。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "アップデートの仕方"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "バックアップを管理する"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "プリンターの設定"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "サポートブロッカー"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "サポートが印刷されないボリュームを作成します。"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "リムーバブルドライブ"
+msgid "Monitor"
+msgstr "モニター"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "リムーバブルドライブに保存"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "リムーバブルドライブ{0}に保存"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "書き出すために利用可能な形式のファイルがありません！"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "リムーバブルドライブ<filename>{0}</filename>に保存中"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "保存中"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "<filename>{0}</filename>を保存できませんでした: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "デバイス{device}に書き出すためのファイル名が見つかりませんでした。"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "リムーバブルドライブ{0}に保存することができませんでした: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "エラー"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "リムーバブルドライブ{0}に {1}として保存"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "ファイル保存"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "取り出す"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "リムーバブルデバイス{0}を取り出す"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0}取り出し完了。デバイスを安全に取り外せます。"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "ハードウェアを安全に取り外します"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "{0}取り出し失敗。他のプログラムがデバイスを使用しているため。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "ファームウェアアップデート"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 プロファイル"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "推奨"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "カスタム"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "プロジェクトファイル <filename>{0}</filename> に不明なマシンタイプ <message>{1}</message> があります。マシンをインポートできません。代わりにモデルをインポートします。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "プロジェクトファイルを開く"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "プロジェクトファイル<filename>{0}</filename>が突然アクセスできなくなりました：<message>{1}</message>。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "プロジェクトファイルを開けません"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "プロジェクトファイル<filename>{0}</filename>は破損しています：<message>{1}</message>。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "プロジェクトファイル<filename>{0}</filename>はこのバージョンのUltimaker Curaでは認識できないプロファイルを使用して作成されています。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27 /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF ファイル"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "UFPファイルに書き込めません："
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28 /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimakerフォーマットパッケージ"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-codeファイル"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "プレビュー"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "透視ビューイング"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "レイヤーを処理しています"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Information"
-msgstr "インフォメーション"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "予期しないエラーが発生し、スライスに失敗しました。問題追跡ツールでのバグ報告をご検討ください。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "スライスに失敗しました"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "バグを報告"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Ultimaker Curaの問題追跡ツールでバグを報告してください。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "選ばれたプリンターまたは選ばれたプリント構成が異なるため進行中の材料にてスライスを完了できません。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "スライスできません"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "現在の設定でスライスが完了できません。以下の設定にエラーがあります: {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "モデル別の設定があるためスライスできません。1つまたは複数のモデルで以下の設定にエラーが発生しました：{error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "プライムタワーまたはプライム位置が無効なためスライスできません。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "無効な Extruder %s に関連付けられている造形物があるため、スライスできません。"
+msgid "Warning"
+msgstr "警告"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"設定を見直し、モデルが次の状態かどうかを確認してください。\n"
-"- 造形サイズに合っている\n"
-"- 有効なエクストルーダーに割り当てられている\n"
-"- すべてが修飾子メッシュとして設定されているわけではない"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "リムーバブルドライブ"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "AMF ファイル"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17 /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "圧縮G-codeファイル"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "後処理"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-codeを修正"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USBプリンティング"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "USBを使ってプリントする"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "USBを使ってプリントする"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "USBにて接続する"
+msgid "Ultimaker Format Package"
+msgstr "Ultimakerフォーマットパッケージ"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USBプリントを実行しています。Cura を閉じるとこのプリントも停止します。実行しますか？"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "現在印刷中です。Curaは、前の印刷が完了するまでUSBを介した次の印刷を開始できません。"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "現在印刷中"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "準備する"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-codeを解析"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-codeの詳細"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "データファイルを送信する前に、プリンターとプリンターの構成設定にそのG-codeが適応しているか確認してください。G-codeの表示が適切でない場合があります。"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Gファイル"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG画像"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG画像"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG画像"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP画像"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF画像"
+msgid "Per Model Settings"
+msgstr "各モデル設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "ビルドプレートを調整する"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "各モデル構成設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "アップグレードを選択する"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter はテキストモードをサポートしていません。"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "必要なアップデートの情報にアクセスできません。"
+msgid "Update Firmware"
+msgstr "ファームウェアアップデート"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "お使いの{machine_name}について新機能またはバグ修正が利用できる可能性があります。まだ最新のバージョンでない場合は、プリンターのファームウェアをバージョン{latest_version}に更新することを推奨します。"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "%sの新しい安定版ファームウェアが利用可能です"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "アップデートの仕方"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "サンプルのデータファイルを読み取ることができません。"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "変更を有効にするために{}を終了して再始動する必要があります。"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "同期中..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95 /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Ultimakerアカウントから変更が検出されました"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "材料パッケージとソフトウェアパッケージをアカウントと同期しますか？"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "同期"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "拒否してアカウントから削除"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{}プラグインのダウンロードに失敗しました"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "拒否する"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "同意する"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "プラグインライセンス同意書"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter は非テキストモードはサポートしていません。"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "エクスポートする前にG-codeの準備をしてください。"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Curaはワイヤープリンティングが有効な場合は正確にレイヤーを表示しません。"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Curaはグループ{0}のホストプリンターにまだインストールされていない材料プロフィールを検出しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "シミュレーションビュー"
+msgid "Sending materials to printer"
+msgstr "プリンターに材料を送信しています"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "最初にスライスする必要があるため、何も表示されません。"
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "{0}に接続を試みていますが、これはグループのホストではありません。グループホストとして設定するには、ウェブページを参照してください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "表示するレイヤーがありません"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "今後このメッセージを表示しない"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "レイヤービュー"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "ネットワーク上のプリント"
+msgid "Not a group host"
+msgstr "グループホストではありません"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "ネットワークのプリント"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "グループの設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "ネットワーク上で接続"
+msgid "Sending Print Job"
+msgstr "印刷ジョブ送信中"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "翌日"
+msgid "Uploading print job to printer."
+msgstr "プリントジョブをプリンターにアップロードしています。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "本日"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "プリントジョブのキューがいっぱいです。プリンターは新しいジョブを処理できません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "ネットワーク上にて接続"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "キューがいっぱい"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "現在のジョブが送信されるまで待機してください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "印刷エラー"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "プリントジョブは正常にプリンターに送信されました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "データを送信しました"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Ultimaker Connectを実行していないプリンターに接続しようとしています。プリンターを最新のファームウェアに更新してください。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "プリンターの更新"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "プリントジョブのキューがいっぱいです。プリンターは新しいジョブを処理できません。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "キューがいっぱい"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "印刷ジョブ送信中"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "プリントジョブをプリンターにアップロードしています。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Curaはグループ{0}のホストプリンターにまだインストールされていない材料プロフィールを検出しました。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "プリンターに材料を送信しています"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "データをプリンタにアップロードできませんでした。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "ネットワークエラー"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "{0}に接続を試みていますが、これはグループのホストではありません。グループホストとして設定するには、ウェブページを参照してください。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "グループホストではありません"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "グループの設定"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1448,133 +296,153 @@ msgstr ""
 "プリンター<b>{printer_name}</b>をクラウド経由で接続できました。\n"
 "プリンターをDigital Factoryに接続することで、どこからでもプリントキューの管理とプリントのモニタリングを行えます"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "クラウドプリンティングの準備はできていますか？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "はじめに"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "詳しく見る"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "クラウドからプリントする"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Ultimaker Connectを実行していないプリンターに接続しようとしています。プリンターを最新のファームウェアに更新してください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "プリンターの更新"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "データをプリンタにアップロードできませんでした。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "ネットワークエラー"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "ネットワーク上のプリント"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "クラウドからプリントする"
+msgid "Print over network"
+msgstr "ネットワークのプリント"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "クラウド経由で接続"
+msgid "Connected over the network"
+msgstr "ネットワーク上で接続"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "プリントをモニタリング"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "翌日"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Ultimaker Digital Factoryでプリントを追跡"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "本日"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "プリントジョブのアップロード時の不明なエラーコード：{0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "ネットワーク上にて接続"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Ultimakerアカウントから新しいプリンターが検出されました"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "アカウントからプリンター{name}（{model}）を追加しています"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
 msgid_plural "... and {0} others"
 msgstr[0] "...および{0}その他"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Digital Factoryからプリンターが追加されました："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "一部のプリンターではクラウド接続は利用できません"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "これらのプリンターはDigital Factoryとリンクされていません："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "接続を確立するには、{website_link}にアクセスしてください"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "プリンターの構成を維持"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "プリンターを取り除く"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "次回のアカウントの同期までに{printer_name}は削除されます。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "{printer_name}を完全に削除するには、{digital_factory_link}にアクセスしてください"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "{printer_name}を一時的に削除してもよろしいですか？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "プリンターを削除しますか？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1587,7 +455,7 @@ msgstr[0] ""
 "Curaから{0}台のプリンターを削除しようとしています。この操作は元に戻せません。\n"
 "続行してもよろしいですか？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1596,4204 +464,5501 @@ msgstr ""
 "Curaからすべてのプリンターを削除しようとしています。この操作は元に戻せません。\n"
 "続行してもよろしいですか？"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "圧縮トライアングルメッシュを開く"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "クラウドからプリントする"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "クラウドからプリントする"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTFバイナリ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "クラウド経由で接続"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF埋め込みJSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "プリントをモニタリング"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Ultimaker Digital Factoryでプリントを追跡"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "圧縮COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "プリントジョブのアップロード時の不明なエラーコード：{0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3Dモデルアシスタント"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "ハイライトされたエリアは、欠けている表面または無関係な表面を示します。モデルを修正してもう一度Curaを開いてください。"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>モデルのサイズまたは材料の設定によっては、適切に印刷しない3Dモデルがあります。:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>可能な限り最高の品質および信頼性を得る方法をご覧ください。</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">印字品質ガイドを見る</a></p>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Curaはワイヤープリンティングが有効な場合は正確にレイヤーを表示しません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "モデルエラー"
+msgid "Simulation View"
+msgstr "シミュレーションビュー"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "ソリッドビュー"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "最初にスライスする必要があるため、何も表示されません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "表示するレイヤーがありません"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "今後このメッセージを表示しない"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "レイヤービュー"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter は非テキストモードはサポートしていません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "エクスポートする前にG-codeの準備をしてください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-codeファイル"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "3Mf ファイルの書き込みエラー。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "3MFリーダーのプラグインが破損しています。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "まだ書き込んでいないワークスペースがありません。まずはプリンターを追加してください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "この作業スペースに書き込む権限がありません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "使用しているオペレーティングシステムでは、この場所またはこのファイル名でプロジェクトファイルを保存することはできません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "3MFファイル"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Curaが3MF fileを算出します"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "モニター"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "圧縮G-codeファイル"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "予期しないエラーが発生し、スライスに失敗しました。問題追跡ツールでのバグ報告をご検討ください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "スライスに失敗しました"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "バグを報告"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Ultimaker Curaの問題追跡ツールでバグを報告してください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "選ばれたプリンターまたは選ばれたプリント構成が異なるため進行中の材料にてスライスを完了できません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3Dモデルアシスタント"
+msgid "Unable to slice"
+msgstr "スライスできません"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "現在の設定でスライスが完了できません。以下の設定にエラーがあります: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "モデル別の設定があるためスライスできません。1つまたは複数のモデルで以下の設定にエラーが発生しました：{error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "プライムタワーまたはプライム位置が無効なためスライスできません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "無効な Extruder %s に関連付けられている造形物があるため、スライスできません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>モデルのサイズまたは材料の設定によっては、適切に印刷しない3Dモデルがあります。:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>可能な限り最高の品質および信頼性を得る方法をご覧ください。</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">印字品質ガイドを見る</a></p>"
+"設定を見直し、モデルが次の状態かどうかを確認してください。\n"
+"- 造形サイズに合っている\n"
+"- 有効なエクストルーダーに割り当てられている\n"
+"- すべてが修飾子メッシュとして設定されているわけではない"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "メッシュタイプ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "レイヤーを処理しています"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "標準モデル"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "インフォメーション"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "サポートとしてプリント"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3Dファイル"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "オーバーラップの設定を変更"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG画像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "オーバーラップをサポートしない"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG画像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "インフィルメッシュのみ"
+msgid "PNG Image"
+msgstr "PNG画像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "メッシュ切断"
+msgid "BMP Image"
+msgstr "BMP画像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "設定を選択する"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF画像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "このモデルをカスタマイズする設定を選択する"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "ノズル"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "フィルター..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "プロジェクトファイル <filename>{0}</filename> に不明なマシンタイプ <message>{1}</message> があります。マシンをインポートできません。代わりにモデルをインポートします。"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "すべて表示する"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "プロジェクトファイルを開く"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura バックアップ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "プロジェクトファイル<filename>{0}</filename>が突然アクセスできなくなりました：<message>{1}</message>。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura バージョン"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "プロジェクトファイルを開けません"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "プリンタ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "プロジェクトファイル<filename>{0}</filename>は破損しています：<message>{1}</message>。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "材料"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "プロジェクトファイル<filename>{0}</filename>はこのバージョンのUltimaker Curaでは認識できないプロファイルを使用して作成されています。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "プロファイル"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "推奨"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "プラグイン"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "カスタム"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "詳しく知りたい？"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "3MF ファイル"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "今すぐバックアップする"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "UFPファイルに書き込めません："
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "自動バックアップ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 プロファイル"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Cura を起動した日は常にバックアップを自動生成します。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "バックアップ"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "リストア"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "バックアップのアップロード中にエラーが発生しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "バックアップの削除"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "バックアップを作成しています..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "このバックアップを削除しますか？これは取り消しできません。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "バックアップの作成中にエラーが発生しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "バックアップのリストア"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "バックアップをアップロードしています..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "バックアップをリストアする前に Cura を再起動する必要があります。今すぐ Cura を閉じますか？"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "バックアップのアップロードを完了しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Cura のバックアップおよび同期を設定します。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "バックアップが最大ファイルサイズを超えています。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "サインイン"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "バックアップを管理する"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "マイ バックアップ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "バックアップ"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "現在バックアップは存在しません。[今すぐバックアップする] を使用して作成してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "バックアップのリストア中にエラーが発生しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "プレビューではバックアップは5つまでに制限されています。古いバックアップは削除してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "サンプルのデータファイルを読み取ることができません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "プリンターの設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter はテキストモードをサポートしていません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X（幅）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "後処理"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-codeを修正"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (奥行き)"
+msgid "Support Blocker"
+msgstr "サポートブロッカー"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (高さ)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "サポートが印刷されないボリュームを作成します。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "ビルドプレート形"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "プレビュー"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "センターを出します"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "透視ビューイング"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "ヒーテッドドベッド"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "ビルドプレートを調整する"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "加熱式ビルドボリューム"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "アップグレードを選択する"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-codeフレーバー"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "プリントヘッド設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X分"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y分"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "最大X"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "最大Y"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "ガントリーの高さ"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "エクストルーダーの数"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "エクストルーダーのオフセットをGCodeに適用します"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "ハイライトされたエリアは、欠けている表面または無関係な表面を示します。モデルを修正してもう一度Curaを開いてください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-Codeの開始"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "モデルエラー"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-codeの終了"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "詳しく見る"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "ノズル設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "ソリッドビュー"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "ノズルサイズ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-codeを解析"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "適合する材料直径"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-codeの詳細"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "ノズルオフセットX"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "データファイルを送信する前に、プリンターとプリンターの構成設定にそのG-codeが適応しているか確認してください。G-codeの表示が適切でない場合があります。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "ノズルオフセットY"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Gファイル"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "冷却ファンの番号"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "プリンターの設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "エクストルーダーがG-Codeを開始する"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USBプリンティング"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "エクストルーダーがG-Codeを終了する"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "USBを使ってプリントする"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "プリンター"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "USBを使ってプリントする"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "ファームウェアアップデート"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "USBにて接続する"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "ファームウェアとは直接お持ちの3Dプリンターを動かすソフトウェアです。このファームウェアはステップモーターを操作し、温度を管理し、プリンターとして成すべき点を補います。"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USBプリントを実行しています。Cura を閉じるとこのプリントも停止します。実行しますか？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "現在印刷中です。Curaは、前の印刷が完了するまでUSBを介した次の印刷を開始できません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "現在印刷中"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "プリンターを読み込み中..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "プレファレンスをセットアップ中..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "アクティブなプリンターを初期化中..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "プリンターマネージャーを初期化中..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "ビルドボリュームを初期化中..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "シーンをセットアップ中..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "インターフェイスを読み込み中..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "エンジンを初期化中..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "一度に一つのG-codeしか読み取れません。{0}の取り込みをスキップしました。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "G-codeを読み込み中は他のファイルを開くことができません。{0}の取り込みをスキップしました。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "配達時のファームウェアで動かすことはできますが、新しいバージョンの方がより改善され、便利なフィーチャーがついてきます。"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "自動でファームウェアをアップグレード"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "ビジュアル"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "カスタムファームウェアをアップロードする"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "ビジュアルプロファイルは、優れたビジュアルと表面品質を目的としたビジュアルプロトタイプやモデルをプリントするために設計されています。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "プリンターと接続されていないため、ファームウェアをアップデートできません。"
+msgid "Engineering"
+msgstr "Engineering"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "エンジニアリングプロファイルは、精度向上と公差の厳格対応を目的とした機能プロトタイプや最終用途部品をプリントするために設計されています。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "プリンターとの接続はファームウェアのアップデートをサポートしていないため、ファームウェアをアップデートできません。"
+msgid "Draft"
+msgstr "ドラフト"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "カスタムファームウェアを選択する"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "ドラフトプロファイルは、プリント時間の大幅短縮を目的とした初期プロトタイプとコンセプト検証をプリントするために設計されています。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "ファームウェアアップデート"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "上書きできません"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "{0}を取り除いてもよろしいですか？この操作は元に戻せません!"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "ファームウェアアップデート中。"
+msgid "Unknown"
+msgstr "不明"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "ファームウェアアップデート完了。"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "下のプリンターはグループの一員であるため接続できません"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "不特定なエラーの発生によりファームウェアアップデート失敗しました。"
+msgid "Available networked printers"
+msgstr "ネットワークで利用可能なプリンター"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "計算された"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "プリントを開始する前に、材料プロファイルをプリンターと同期させてください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "新しい材料がインストールされました"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "コミュニケーションエラーによりファームウェアアップデート失敗しました。"
+msgid "Custom Material"
+msgstr "カスタムフィラメント"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "インプット/アウトプットエラーによりファームウェアアップデート失敗しました。"
+msgid "Custom"
+msgstr "カスタム"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "ファームウェアが見つからず、ファームウェアアップデート失敗しました。"
+msgid "Custom profiles"
+msgstr "カスタムプロファイル"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "プロジェクトを開く"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "すべてのサポートのタイプ ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "既存を更新する"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "全てのファイル"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "新しいものを作成する"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "材料のアーカイブを作成してプリンターと同期するのに失敗しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "サマリーCuraプロジェクト"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "材料のアーカイブを読み込んでプリンターと同期するのに失敗しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "プリンターの設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "Digital Factoryからの応答が破損しているようです。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "このプリンターの問題をどのように解決すればいいか？"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "Digital Factoryからの応答に重要な情報がありません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "タイプ"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Digital Factoryに接続して一部のプリンターと材料を同期するのに失敗しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "プリンターグループ"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Digital Factoryに接続するのに失敗しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "プロファイル設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "ユーザーデータディレクトリからアーカイブを作成できません: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "このプロファイルの問題をどのように解決すればいいか？"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "適切なデータまたはメタデータがないのにCuraバックアップをリストアしようとしました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "ネーム"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "現行バージョンより上の Cura バックアップをリストアしようとしました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "Curaのバックアップのリストア中に次のエラーが発生しました："
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "プロファイル内にない"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "造形物のために新しい位置を探索中"
 
-# Can’t edit the Japanese text
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1個の設定を上書き"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "位置確認"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "次から引き出す"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "全ての造形物の造形サイズに対し、適切な位置が確認できません"
 
-# can’t inset the japanese text
-# %1: print quality profile name
-# %2: number of overridden ssettings
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%2の%1個の設定を上書き"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "位置を確保できません"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "フィラメント設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "ログインに失敗しました"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "このフィラメントの問題をどのように解決すればいいか？"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "アウターウォール"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "視野設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "インナーウォール"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "モード"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "スキン"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "ビジブル設定:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "インフィル"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%2のうち%1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "サポートイルフィル"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "プロジェクトを読み込むとビルドプレート上のすべてのモデルがクリアされます。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "サポートインターフェイス"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "開く"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "サポート"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "プラグイン処理後"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "スカート"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "スクリプトの処理後"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "プライムタワー"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "スクリプトを加える"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "移動"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "退却"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "他"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "設定"
+msgid "Group #{group_nr}"
+msgstr "グループ #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "処理したアクティブなスクリプトを変更します。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "リリースノートを開くことができませんでした。"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "次のスクリプトがアクティブです:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "スキップ"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "画像を変換する..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "閉める"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "“ベース”から各ピクセルへの最大距離。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "追加"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "高さ（mm）"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "終わる"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "ミリメートルでビルドプレートからベースの高さ。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "キャンセル"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "ベース（mm）"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "次"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "ビルドプレート上の幅ミリメートル。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "プリントシークエンス設定値により、ガントリーと造形物の衝突を避けるため印刷データの高さを低くしました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "幅（mm）"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "造形サイズ"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "ビルドプレート上の奥行きミリメートル"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "材料アーカイブを{}に保存できませんでした："
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "深さ（mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "材料アーカイブの保存に失敗しました"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "リトフェインの場合、暗いピクセルは、より多くの光を通すために厚い場所に対応する必要があります。高さマップの場合、明るいピクセルは高い地形を表しているため、明るいピクセルは生成された3D モデルの厚い位置に対応する必要があります。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "不明なエラー。"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "暗いほうを高く"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "すでに存在するファイルです"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "薄いほうを高く"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "<filename>{0}</filename> は既に存在します。ファイルを上書きしますか？"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "リトフェインの場合、半透明性を示す単純な対数モデルを利用できます。高さマップの場合、ピクセル値は高さに比例します。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "無効なファイルのURL:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "線形"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "サポート対象外"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "半透明性"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "厚さ1ミリメートルのプリントを貫通する光の割合。この値を小さくすると、画像の暗い領域ではコントラストが増し、明るい領域ではコントラストが減少します。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "現在利用可能な次のエクストルーダーに合わせて設定が変更されました："
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1mm透過率（%）"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "設定が更新されました"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "画像に適応したスムージング量。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "エクストルーダーを無効にしました"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "スムージング"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "<filename>{0}</filename>にプロファイルを書き出すのに失敗しました: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "<filename>{0}</filename>にプロファイルを書き出すことに失敗しました。：ライタープラグイン失敗の報告。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "このUltimaker Originalに施されたアップグレートを選択する"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "<filename>{0}</filename>にプロファイルを書き出しました"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "ヒーティッドビルドプレート（オフィシャルキットまたはセルフビルド）"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "書き出し完了"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "ビルドプレートのレベリング"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "<filename>{0}</filename>からプロファイルの取り込に失敗しました：{1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "プリントの成功率を上げるために、ビルドプレートを今調整できます。’次のポジションに移動’をクリックすると。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "プリンタを追加する前に、<filename>{0}</filename>からプロファイルの取り込はできません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "すべてのポジションに。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "ファイル<filename>{0}</filename>にはカスタムプロファイルがインポートされていません"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "ビルドプレートのレベリングを開始する"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "<filename>{0}</filename>からプロファイルの取り込に失敗しました："
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "次のポジションに移動"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "このプロファイル<filename>{0}</filename>には、正しくないデータが含まれているため、インポートできません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "匿名データの収集に関する詳細"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "<filename>{0}</filename>からプロファイルの取り込みに失敗しました："
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura は、印刷品質とユーザーエクスペリエンスを向上させるために匿名データを収集します。以下は、共有されるすべてのデータの例です："
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "プロファイル{0}の取り込みが完了しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "匿名データは送信しない"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "ファイル{0}には、正しいプロファイルが含まれていません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "匿名データの送信を許可する"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "プロファイル{0}は不特定なファイルまたは破損があります。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "マーケットプレース"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "カスタムプロファイル"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "パッケージへの変更を有効にするためにCuraを再起動する必要があります。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "プロファイルはクオリティータイプが不足しています。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "%1を終了する"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "アクティブなプリンターはありません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "インストール"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "プロファイルを追加できません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "インストールした"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "クオリティータイプ「{0}」は、現在アクティブなプリンター定義「{1}」と互換性がありません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "プレミアム"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "警告：現在の構成ではクオリティータイプ「{0}」を使用できないため、プロファイルは表示されません。このクオリティータイプを使用できる材料/ノズルの組み合わせに切り替えてください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "ウェブマーケットプレイスに移動"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "造形データを増やす、配置する"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "材料を検索"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "造形データを配置"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "互換性"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "造形データを配置"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "プリンター"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "新しいサインインプロセスを開始できません。別のサインインの試行がアクティブなままになっていないか確認します。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "ビルドプレート"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Ultimaker アカウントサーバーに到達できません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "サポート"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "ログインに失敗しました"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "品質"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "応答を読み取れません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "技術データシート"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "指定された状態が正しくありません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "安全データシート"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "アカウントサーバーでの認証中にタイムアウトしました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "印刷ガイドライン"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "このアプリケーションの許可において必要な権限を与えてください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "ウェブサイト"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "ログイン時に予期しないエラーが発生しました。やり直してください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "インストールまたはアップデートには<a href='%1'>ログイン</a>が必要です"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Curaを開始できません"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>材料スプールの購入</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>申し訳ありません。Ultimaker Cura で何らかの不具合が生じています。</p></b>\n"
+"                    <p>開始時に回復不能のエラーが発生しました。不適切なファイル設定が原因の可能性があります。バックアップを実行してからリセットしてください。</p>\n"
+"                    <p>バックアップは、設定フォルダに保存されます。</p>\n"
+"                    <p>問題解決のために、このクラッシュ報告をお送りください。</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "アップデート"
+msgid "Send crash report to Ultimaker"
+msgstr "クラッシュ報告をUltimakerに送信する"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "更新中"
+msgid "Show detailed crash report"
+msgstr "詳しいクラッシュ報告を表示する"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "更新済み"
+msgid "Show configuration folder"
+msgstr "コンフィグレーションのフォルダーを表示する"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "戻る"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "プラグイン"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "マテリアル"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "インストールした"
+msgid "Backup and Reset Configuration"
+msgstr "バックアップとリセットの設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "再起動時にインストール"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "クラッシュ報告"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "アップデートには<a href='%1'>ログイン</a>が必要です"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>致命的なエラーが発生しました。問題解決のためこのクラッシュレポートを送信してください</p></b>\n"
+"            <p>「レポート送信」ボタンを使用してバグレポートが自動的に当社サーバーに送られるようにしてください</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "ダウングレード"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "システム情報"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "アンインストール"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "不明"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "地域貢献"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Curaバージョン"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "コミュニティプラグイン"
+msgid "Cura language"
+msgstr "Cura言語"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "汎用材料"
+msgid "OS language"
+msgstr "OS言語"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "パッケージ取得中..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "プラットフォーム"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "ウェブサイト"
+msgid "Qt version"
+msgstr "Qtバージョン"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "電子メール"
+msgid "PyQt version"
+msgstr "PyQtバージョン"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "検証済みのUltimaker Cura Enterprise用プラグインおよび材料を入手するにはサインインしてください"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "バージョン"
+msgid "Not yet initialized<br/>"
+msgstr "初期化されていません<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "最終更新日"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGLバージョン: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "ブランド"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGLベンダー: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "ダウンロード"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGLレンダラー: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "インストールされたプラグイン"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "エラー・トレースバック"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "プラグインはインストールされていません。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "ログ"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "インストールされた材料"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "レポート送信"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "材料はインストールされていません。"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"プリンタが接続されているか確認し、以下を行います。\n"
+"- プリンタの電源が入っているか確認します。\n"
+"- プリンタがネットワークに接続されているかどうかを確認します。- クラウドに接続されたプリンタを検出するためにサインインしているかどうかを確認します。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "バンドルされたプラグイン"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "プリンターをネットワークに接続してください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "バンドルされた材料"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "ユーザーマニュアルをオンラインで見る"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Curaパッケージデータベースに接続できません。接続を確認してください。"
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Cura から印刷を監視するには、プリンタを接続してください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "パッケージをインストールするにはライセンスに同意する必要があります"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "このモデルをカスタマイズする設定を選択する"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "アカウントにおける変更"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "フィルター..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "無視"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "すべて表示する"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "次"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "メッシュタイプ"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "次のパッケージが追加されます:"
+msgid "Normal model"
+msgstr "標準モデル"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "次のパッケージは、Curaバージョンに互換性がないため、インストールできません:"
+msgid "Print as support"
+msgstr "サポートとしてプリント"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "アンインストール確認"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "オーバーラップの設定を変更"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "使用中の材料またはプロファイルをアンインストールしようとしています。確定すると以下の材料/プロファイルをデフォルトにリセットします。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "オーバーラップをサポートしない"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "材料"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "インフィルメッシュのみ"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "プロファイル"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "メッシュ切断"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "確認"
+msgid "Select settings"
+msgstr "設定を選択する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "ファームウェアアップデート"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "カラースキーム"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "ファームウェアとは直接お持ちの3Dプリンターを動かすソフトウェアです。このファームウェアはステップモーターを操作し、温度を管理し、プリンターとして成すべき点を補います。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "フィラメントの色"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "配達時のファームウェアで動かすことはできますが、新しいバージョンの方がより改善され、便利なフィーチャーがついてきます。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "ラインタイプ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "自動でファームウェアをアップグレード"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "スピード"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "カスタムファームウェアをアップロードする"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "レイヤーの厚さ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "プリンターと接続されていないため、ファームウェアをアップデートできません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "ライン幅"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "プリンターとの接続はファームウェアのアップデートをサポートしていないため、ファームウェアをアップデートできません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "フロー"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "カスタムファームウェアを選択する"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "コンパティビリティモード"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "ファームウェアアップデート"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "移動"
+msgid "Updating firmware."
+msgstr "ファームウェアアップデート中。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "ヘルプ"
+msgid "Firmware update completed."
+msgstr "ファームウェアアップデート完了。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "外郭"
+msgid "Firmware update failed due to an unknown error."
+msgstr "不特定なエラーの発生によりファームウェアアップデート失敗しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "インフィル"
+msgid "Firmware update failed due to an communication error."
+msgstr "コミュニケーションエラーによりファームウェアアップデート失敗しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "開始"
+msgid "Firmware update failed due to an input/output error."
+msgstr "インプット/アウトプットエラーによりファームウェアアップデート失敗しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "トップのレイヤーを表示する"
+msgid "Firmware update failed due to missing firmware."
+msgstr "ファームウェアが見つからず、ファームウェアアップデート失敗しました。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "トップの5レイヤーの詳細を表示する"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "中止しました"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "トップ/ボトム"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "終了"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "インナーウォール"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "準備中..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "最小"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "中止しています..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "最大"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "失敗"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "一時停止しています..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "一時停止"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "再開しています..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "アクションが必要です"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "%1 を %2 に終了します"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "プリンター管理"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "ガラス"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "キューをリモートで管理するには、プリンターのファームウェアを更新してください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "クラウドプリンターのウェブカムフィードをUltimaker Curaから見ることができません。「プリンター管理」をクリックして、Ultimaker Digital Factoryにアクセスし、このウェブカムを見ます。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "読み込み中..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "利用不可"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "到達不能"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "アイドル"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "準備中..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "プリント中"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "無題"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "匿名"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "構成の変更が必要です"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "詳細"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "利用できないプリンター"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "次の空き"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "順番を待つ"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "ブラウザで管理する"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "キューに印刷ジョブがありません。追加するには、スライスしてジョブを送信します。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "プリントジョブ"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "合計印刷時間"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "待ち時間"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "ネットワーク上のプリント"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "プリント"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "プリンターの選択"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "構成の変更"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "上書き"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "割り当てられたプリンター %1 には以下の構成変更が必要です:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "プリンター %1 が割り当てられましたが、ジョブには不明な材料構成があります。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "材料 %1 を %2 から %3 に変更します。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "%3 を 材料 %1 にロードします（これは上書きできません）。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "プリントコア %1 を %2 から %3 に変更します。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "ビルドプレートを %1 に変更します（これは上書きできません）。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "上書きは、既存のプリンタ構成で指定された設定を使用します。これにより、印刷が失敗する場合があります。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "アルミニウム"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "終了"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "中止しています..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "中止しました"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "失敗"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "一時停止しています..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "一時停止"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "再開しています..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "ネットワーク上のプリント"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "アクションが必要です"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "プリント"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "%1 を %2 に終了します"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "プリンターの選択"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "ネットワーク上で繋がったプリンターに接続"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "印刷ジョブをネットワークを介してプリンターに直接送信するには、ネットワークケーブルを使用してプリンターを確実にネットワークに接続するか、プリンターを WIFI ネットワークに接続します。Cura をプリンタに接続していない場合でも、USB ドライブを使用して g コードファイルをプリンターに転送することはできます。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "以下のリストからプリンタを選択します:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "編集"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "取り除く"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "更新"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "お持ちのプリンターがリストにない場合、<a href='%1'>ネットワーク・プリンティング・トラブルシューティング・ガイド</a>を読んでください"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "タイプ"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "ファームウェアバージョン"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "アドレス"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "このプリンターは、プリンターのグループをホストするために設定されていません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "このプリンターは %1 プリンターのループのホストプリンターです。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "このアドレスのプリンターは応答していません。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "接続"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "無効なIPアドレス"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "有効なIPアドレスを入力してください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "プリンターアドレス"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "ネットワーク内のプリンターのIPアドレスを入力してください。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "利用できないプリンター"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "次の空き"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "最上位に移動"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "削除"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "再開"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "一時停止しています..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "再開しています..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "一時停止"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "中止しています..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "中止"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "%1 をキューの最上位に移動しますか？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "印刷ジョブを最上位に移動する"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "%1 を削除しますか？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "印刷ジョブの削除"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "%1 を中止してよろしいですか？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "プリント中止"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "順番を待つ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "ブラウザで管理する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "キューに印刷ジョブがありません。追加するには、スライスしてジョブを送信します。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "プリントジョブ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "合計印刷時間"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "待ち時間"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "カラースキーム"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "フィラメントの色"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "ラインタイプ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "スピード"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "レイヤーの厚さ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "ライン幅"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "フロー"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "コンパティビリティモード"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "移動"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "ヘルプ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "外郭"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "インフィル"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "開始"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "トップのレイヤーを表示する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "トップの5レイヤーの詳細を表示する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "トップ/ボトム"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "インナーウォール"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "最小"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "最大"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"プリンタが接続されているか確認し、以下を行います。\n"
-"- プリンタの電源が入っているか確認します。\n"
-"- プリンタがネットワークに接続されているかどうかを確認します。- クラウドに接続されたプリンタを検出するためにサインインしているかどうかを確認します。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "プリンターをネットワークに接続してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "高さ（mm）"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "ユーザーマニュアルをオンラインで見る"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "“ベース”から各ピクセルへの最大距離。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Cura から印刷を監視するには、プリンタを接続してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "ベース（mm）"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "このプリントの何かが問題です。クリックして調整のヒントをご覧ください。"
+msgid "The base height from the build plate in millimeters."
+msgstr "ミリメートルでビルドプレートからベースの高さ。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "幅（mm）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3Dビュー"
+msgid "The width in millimeters on the build plate"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "深さ（mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "フロントビュー"
+msgid "The depth in millimeters on the build plate"
+msgstr "ビルドプレート上の奥行きミリメートル"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "暗いほうを高く"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "薄いほうを高く"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "トップビュー"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "リトフェインの場合、暗いピクセルは、より多くの光を通すために厚い場所に対応する必要があります。高さマップの場合、明るいピクセルは高い地形を表しているため、明るいピクセルは生成された3D モデルの厚い位置に対応する必要があります。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "線形"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "半透明性"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "左ビュー"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "リトフェインの場合、半透明性を示す単純な対数モデルを利用できます。高さマップの場合、ピクセル値は高さに比例します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1mm透過率（%）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "右ビュー"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "厚さ1ミリメートルのプリントを貫通する光の割合。この値を小さくすると、画像の暗い領域ではコントラストが増し、明るい領域ではコントラストが減少します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "オブジェクトリスト"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "スムージング"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "画像に適応したスムージング量。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "マーケットプレース"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&ファイル"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "プロジェクトを開く"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&編集"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "既存を更新する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&ビュー"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "新しいものを作成する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "サマリーCuraプロジェクト"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "拡張子"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "このプリンターの問題をどのように解決すればいいか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "プレファレンス"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "プリンターの設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "ヘルプ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "タイプ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "新しいプロジェクト"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "プリンターグループ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "新しいプロジェクトを開始しますか？この作業では保存していない設定やビルドプレートをクリアします。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "このプロファイルの問題をどのように解決すればいいか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "スライス中..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "プロファイル設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "スライスできません"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "ネーム"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "プロファイル内にない"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+# Can’t edit the Japanese text
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1個の設定を上書き"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "次から引き出す"
+
+# can’t inset the japanese text
+# %1: print quality profile name
+# %2: number of overridden ssettings
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%2の%1個の設定を上書き"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "このフィラメントの問題をどのように解決すればいいか？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "フィラメント設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "視野設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "モード"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "ビジブル設定:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%2のうち%1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "プロジェクトを読み込むとビルドプレート上のすべてのモデルがクリアされます。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "開く"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "処理"
+msgid "Want more?"
+msgstr "詳しく知りたい？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "スライス"
+msgid "Backup Now"
+msgstr "今すぐバックアップする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "スライス処理の開始"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "自動バックアップ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "キャンセル"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Cura を起動した日は常にバックアップを自動生成します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "時間予測"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura バージョン"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "材料予測"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "プリンタ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "材料"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "プロファイル"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "時間予測がありません"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "プラグイン"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "コスト予測がありません"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "リストア"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "バックアップの削除"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "このバックアップを削除しますか？これは取り消しできません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "バックアップのリストア"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "バックアップをリストアする前に Cura を再起動する必要があります。今すぐ Cura を閉じますか？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Cura のバックアップおよび同期を設定します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "プレビュー"
+msgid "Sign in"
+msgstr "サインイン"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "プリンターの追加"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "マイ バックアップ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "現在バックアップは存在しません。[今すぐバックアップする] を使用して作成してください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "プレビューではバックアップは5つまでに制限されています。古いバックアップは削除してください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura バックアップ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "匿名データの収集に関する詳細"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura は、印刷品質とユーザーエクスペリエンスを向上させるために匿名データを収集します。以下は、共有されるすべてのデータの例です："
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "匿名データは送信しない"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "匿名データの送信を許可する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "プラグイン処理後"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "ネットワークプリンターの追加"
+msgid "Post Processing Scripts"
+msgstr "スクリプトの処理後"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "スクリプトを加える"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "非ネットワークプリンターの追加"
+msgid "Settings"
+msgstr "設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "処理したアクティブなスクリプトを変更します。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "次のスクリプトがアクティブです:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "クラウドプリンターを追加"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "このUltimaker Originalに施されたアップグレートを選択する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "クラウドの応答を待機しています"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "ヒーティッドビルドプレート（オフィシャルキットまたはセルフビルド）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "ビルドプレートのレベリング"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "アカウントにプリンターが見つかりませんか？"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "プリントの成功率を上げるために、ビルドプレートを今調整できます。’次のポジションに移動’をクリックすると。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "アカウントの以下のプリンターがCuraに追加されました："
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "すべてのポジションに。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "ビルドプレートのレベリングを開始する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "次のポジションに移動"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "プリンタを手動で追加する"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "IP アドレスでプリンターを追加"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "プリンターのIPアドレスを入力します。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "追加"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "デバイスに接続できません。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "%1を終了する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Ultimakerプリンターに接続できませんか？"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "このアドレスのプリンターは応答していません。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "このプリンタは不明なプリンタであるか、またはグループのホストではないため、追加できません。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "戻る"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "接続"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "ユーザー用使用許諾契約"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "拒否して閉じる"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Ultimaker Cura にようこそ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"以下の手順で\n"
-"Ultimaker Cura を設定してください。数秒で完了します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "はじめに"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Ultimakerのプラットフォームにサインイン"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "マーケットプレイスから材料設定とプラグインを追加"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "材料設定とプラグインのバックアップと同期"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Ultimakerコミュニティで48,000人以上のユーザーとアイデアを共有してアドバイスをもらう"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "スキップ"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "拒否する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "無料のUltimakerアカウントを作成"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "プリンター"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "ノズル設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "製造元"
+msgid "Nozzle size"
+msgstr "ノズルサイズ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "プロファイル作成者"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "プリンター名"
+msgid "Compatible material diameter"
+msgstr "適合する材料直径"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "プリンターに名前を付けてください"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "ノズルオフセットX"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "ネットワークにプリンターはありません。"
+msgid "Nozzle offset Y"
+msgstr "ノズルオフセットY"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "更新"
+msgid "Cooling Fan Number"
+msgstr "冷却ファンの番号"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "エクストルーダーがG-Codeを開始する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "エクストルーダーがG-Codeを終了する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "プリンターの設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "IP でプリンターを追加"
+msgid "X (Width)"
+msgstr "X（幅）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "クラウドプリンターを追加"
+msgid "Y (Depth)"
+msgstr "Y (奥行き)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "トラブルシューティング"
+msgid "Z (Height)"
+msgstr "Z (高さ)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ultimaker Cura の改善にご協力ください"
+msgid "Build plate shape"
+msgstr "ビルドプレート形"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura は、印刷品質とユーザーエクスペリエンスを向上させるために以下の匿名データを収集します:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "センターを出します"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "プリンターのタイプ"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "ヒーテッドドベッド"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "材料の利用状況"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "加熱式ビルドボリューム"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "スライスの数"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-codeフレーバー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "プリント設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "プリントヘッド設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura が収集したデータには個人データは含まれません。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X分"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "詳細"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y分"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "新情報"
+msgid "X max"
+msgstr "最大X"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "空にする"
+msgid "Y max"
+msgstr "最大Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "リリースノート"
+msgid "Gantry Height"
+msgstr "ガントリーの高さ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "エクストルーダーの数"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "エクストルーダーのオフセットをGCodeに適用します"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-Codeの開始"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-codeの終了"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "マイプリンター"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Ultimaker Digital Factoryでプリンターをモニタリングします。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Digital Libraryでプリントプロジェクトを作成します。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "プリントジョブ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "プリントジョブをモニタリングしてプリント履歴から再プリントします。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Ultimaker Curaをプラグインと材料プロファイルで拡張します。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Ultimaker eラーニングで3Dプリンティングのエキスパートになります。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Ultimakerのサポート"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Ultimaker Curaの使用を開始する方法を確認します。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "質問をする"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Ultimaker Communityをご参照ください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "バグを報告"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "問題が発生していることを開発者にお知らせください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Ultimakerウェブサイトをご確認ください。"
+
+# can’t enter japanese
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "選択したモデルを%1で印刷する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "新しいプロジェクト"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "新しいプロジェクトを開始しますか？この作業では保存していない設定やビルドプレートをクリアします。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "マーケットプレース"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "ビルドプレート"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "ヒーティッドベッドの目標温度。ベッドはこの温度に向けて上がったり下がったりします。これが0の場合、ベッドの加熱はオフになっています。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "現在のヒーティッドベッドの温度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "ベッドのプリヒート温度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "キャンセル"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "プレヒート"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "プリント開始前にベッドを加熱します。加熱中もプリントの調整を行えます、またべットが加熱するまでプリント開始を待つ必要もありません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "このプリンターはつながっていません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "プリンターコントロール"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "ジョグの位置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "ジョグの距離"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "G-codeの送信"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "カスタムG-codeコマンドを接続されているプリンターに送信します。「Enter」を押してコマンドを送信します。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "エクストルーダー"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "ホットエンドの目標温度。ホットエンドはこの温度に向けて上がったり下がったりします。これが0の場合、ホットエンドの加熱はオフになっています。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "このホットエンドの現在の温度です。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "ホットエンドをプリヒートする温度です。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "プリント開始前にホットエンドを加熱します。加熱中もプリントの調整を行えます、またホットエンドが加熱するまでプリント開始を待つ必要もありません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "エクストルーダーのマテリアルの色。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "エクストルーダー入ったフィラメント。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "ノズルが入ったエクストルーダー。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "プロジェクトを開く"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "これはCuraのプロジェクトファイルです。プロジェクトとしてあけますか、それともモデルのみ取り込みますか？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "選択を記憶させる"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "プロジェクトを開く"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "モデルを取り込む"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "プロジェクトを保存"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "エクストルーダー%1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1とフィラメント"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "材料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "保存中のプロジェクトサマリーを非表示にする"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "保存"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "ファイルを開く"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "選択したファイルの中に複数のプロジェクトが存在します。1ファイルのみ一度に開けます。ファイルからモデルを先に取り込むことをお勧めします。続けますか？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "すべてをモデルとして取り入れる"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "%1について"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "バージョン: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "熱溶解積層型3Dプリンティングのエンドtoエンドソリューション。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
 "Cura proudly uses the following open source projects:"
 msgstr "CuraはUltimakerB.Vのコミュニティの協力によって開発され、Curaはオープンソースで使えることを誇りに思います:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "グラフィックユーザーインターフェイス"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "アプリケーションフレームワーク"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-codeの生成"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "インタープロセスコミュニケーションライブラリー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "プログラミング用語"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUIフレームワーク"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUIフレームワークバインディング"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ バインディングライブラリー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "データインターフェイスフォーマット"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "サイエンスコンピューティングを操作するためのライブラリーサポート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "ファターマスを操作するためのライブラリーサポート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "STLファイルを操作するためのライブラリーサポート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "平面対象物を操作するためのライブラリーサポート"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "参画メッシュを操作するためのライブラリーサポート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "3MFファイルを操作するためのライブラリーサポート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "ファイルメタデータとストリーミングのためのライブラリーサポート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "シリアルコミュニケーションライブラリー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConfディスカバリーライブラリー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "ポリゴンクリッピングライブラリー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Python用の静的型チェッカー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "SSLの信頼性を検証するためのルート証明書"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Pythonエラー追跡ライブラリー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Prusa Research開発のポリゴンパッキングライブラリー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "libnest2dのPythonバインディング"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "システムキーリングアクセスを操作するためのライブラリーサポート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Microsoft Windows用のPython拡張機能"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "フォント"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVGアイコン"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux 分散アプリケーションの開発"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "ファイルを開く"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "選択したファイルの中に複数のプロジェクトが存在します。1ファイルのみ一度に開けます。ファイルからモデルを先に取り込むことをお勧めします。続けますか？"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "すべてをモデルとして取り入れる"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "プロジェクトを保存"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "エクストルーダー%1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1とフィラメント"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "材料"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "保存中のプロジェクトサマリーを非表示にする"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "保存"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "変更を取り消すか保存するか"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"一部のプロファイル設定がカスタマイズされています。\n"
-"これらの変更された設定をプロファイルの切り替え後も維持しますか？\n"
-"変更を破棄して'%1'からデフォルトの設定を読み込むこともできます。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "プロファイル設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "現在の変更"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "毎回確認する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "取り消し、再度確認しない"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "キープし、再度確認しない"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "変更を破棄"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "変更を維持"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "プロジェクトを開く"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "選択するアイテムがありません"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "これはCuraのプロジェクトファイルです。プロジェクトとしてあけますか、それともモデルのみ取り込みますか？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "ファイルを開く..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "選択を記憶させる"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "最近開いたファイルを開く"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "プロジェクトを開く"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "ビジブル設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "モデルを取り込む"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "すべてのカテゴリを折りたたむ"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "視野のセッティングを管理する..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&フィラメント"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "アクティブエクストルーダーとしてセットする"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "エクストルーダーを有効にする"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "エクストルーダーを無効にする"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "材料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "お気に入り"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "汎用"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "ヘルプ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&ファイル"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "プロジェクトを保存... (&S)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "エクスポート... (&E)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "選択エクスポート..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "プレファレンス"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&編集"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&プリンター"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "ネットワーク対応プリンター"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "ローカルプリンター"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "拡張子"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "構成"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "プリントをアクティベートする"
+msgid "Loading available configurations from the printer..."
+msgstr "プリンタから利用可能な構成を読み込んでいます..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "ジョブネーム"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "プリンタが接続されていないため、構成は利用できません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "プリント時間"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "%1 が認識されていないためこの構成は利用できません。%2 から適切な材料プロファイルをダウンロードしてください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "残り時間"
+msgid "Marketplace"
+msgstr "マーケットプレース"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "クラウドプリンターがオフラインです。プリンターの電源が入っている状態で、インターネットに接続されているかどうかを確認してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "このエクストルーダーの構成が許可されておらず、スライスを妨げています。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "このプリンターはお使いのアカウントにリンクされていません。Ultimaker Digital Factoryにアクセスして接続を確立してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "このエクストルーダーの構成に一致するプロファイルがありません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "クラウド接続は現在利用できません。サインインしてクラウドプリンターに接続してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "構成の選択"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "クラウド接続は現在利用できません。インターネット接続を確認してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "構成"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "プリンターの追加"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "カスタム"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "プリンター管理"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "プリンター"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "キャンセルしたプリンター"
+msgid "Enabled"
+msgstr "有効"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "プリンターのプリセット"
+msgid "Material"
+msgstr "フィラメント"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "プリント設定"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "この材料の組み合わせの接着に接着材を使用する。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "印刷設定は無効にされました。G-code ファイルは変更できません。"
+# can’t enter japanese texts
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "選択したモデルで印刷:"
+
+# can’t eneter japanese texts
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "選択した複数のモデル"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "プロファイル"
+msgid "Number of Copies"
+msgstr "コピーの数"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "プロジェクトを保存..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&ビュー"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "カメラ位置 (&C)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "カメラビュー"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "パースペクティブ表示"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "平行投影表示"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "タイプ表示"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Ultimakerのプラットフォームにサインイン"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"いくらかの設定プロファイルにある値とことなる場合無効にします。\n"
-"プロファイルマネージャーをクリックして開いてください。"
+"- マーケットプレースから材料プロファイルとプラグインを追加\n"
+"- 材料プロファイルとプラグインのバックアップと同期\n"
+"- Ultimakerコミュニティで48,000人以上のユーザーとアイデアを共有してアドバイスをもらう"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "カスタムプロファイル"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "無料のUltimakerアカウントを作成"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "今の変更を破棄する"
+msgid "Sign in"
+msgstr "サインイン"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "最終更新：%1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "推奨"
+msgid "Ultimaker Account"
+msgstr "Ultimakerアカウント"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "カスタム"
+msgid "Sign Out"
+msgstr "サインアウト"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "確認しています..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "アカウント同期"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "問題が発生しました..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "保留中の更新をインストール"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "アカウントの更新を確認"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "スライス中..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "スライスできません"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "処理"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "スライス"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "スライス処理の開始"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "キャンセル"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "時間予測"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "材料予測"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "時間予測がありません"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "コスト予測がありません"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "プレビュー"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "このパッケージは再起動後にインストールされます。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "一般"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "プリンター"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "マテリアル"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "プロファイル"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1を閉じています"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "%1を終了しますか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "パッケージをインストール"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "ファイルを開く(s)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "選択したファイルの中に複数のG-codeが存在します。1つのG-codeのみ一度に開けます。G-codeファイルを開く場合は、1点のみ選んでください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "プリンターを追加する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "新情報"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "オン"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "オフ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "実験"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "プリント設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "印刷設定は無効にされました。G-code ファイルは変更できません。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "推奨"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "カスタム"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "エクストルーダー%2の設定には%1プロファイルがありません。代わりにデフォルトの目的が使用されます"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "プロファイル"
+msgid "Gradual infill"
+msgstr "インフィル半減"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "プロファイルの設定がいくつか変更されました。変更を有効にするにはカスタムモードに移動してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "グラデュアルインフィルはトップに向かうに従ってインフィルの量を増やします。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "サポート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "オーバーハングがあるモデルにサポートを生成します。このサポート構造なしでは、プリント中にオーバーハングのパーツが崩壊してしまいます。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "インフィル半減"
+msgid "Profiles"
+msgstr "プロファイル"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "グラデュアルインフィルはトップに向かうに従ってインフィルの量を増やします。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "プロファイルの設定がいくつか変更されました。変更を有効にするにはカスタムモードに移動してください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "密着性"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "ブリムまたはラフトのプリントの有効化。それぞれ、プリントの周り、また造形物の下に底面を加え切り取りやすくします。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "プロジェクトを保存..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "カスタムプロファイル"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "ネットワーク対応プリンター"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "今の変更を破棄する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "ローカルプリンター"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "プロファイル"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "材料"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"いくらかの設定プロファイルにある値とことなる場合無効にします。\n"
+"プロファイルマネージャーをクリックして開いてください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "お気に入り"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "汎用"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "プロファイル"
 
-# can’t enter japanese texts
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "選択したモデルで印刷:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "現在"
 
-# can’t eneter japanese texts
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "選択した複数のモデル"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "コピーの数"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "プロジェクトを保存... (&S)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "エクスポート... (&E)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "選択エクスポート..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "視野設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "構成"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "カスタム"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "全てを調べる"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "アクティベート"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "名を変える"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "直径変更の確認"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "新しいフィラメントの直径は %1 mm に設定されています。これは現在のエクストルーダーに適応していません。続行しますか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "プリンター"
+msgid "Display Name"
+msgstr "ディスプレイ名"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "有効"
+msgid "Brand"
+msgstr "ブランド"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "フィラメント"
+msgid "Material Type"
+msgstr "フィラメントタイプ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "この材料の組み合わせの接着に接着材を使用する。"
+msgid "Color"
+msgstr "色"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "このエクストルーダーの構成が許可されておらず、スライスを妨げています。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "このエクストルーダーの構成に一致するプロファイルがありません。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "プロパティ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "構成の選択"
+msgid "Density"
+msgstr "密度"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "構成"
+msgid "Diameter"
+msgstr "直径"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "プリンタから利用可能な構成を読み込んでいます..."
+msgid "Filament Cost"
+msgstr "フィラメントコスト"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "プリンタが接続されていないため、構成は利用できません。"
+msgid "Filament weight"
+msgstr "フィラメントの重さ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "%1 が認識されていないためこの構成は利用できません。%2 から適切な材料プロファイルをダウンロードしてください。"
+msgid "Filament length"
+msgstr "フィラメントの長さ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "マーケットプレース"
+msgid "Cost per Meter"
+msgstr "毎メーターコスト"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "ファイルを開く..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "このフィラメントは %1にリンクすプロパティーを共有する。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&プリンター"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "フィラメントをリンクを外す"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&フィラメント"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "記述"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "アクティブエクストルーダーとしてセットする"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "接着のインフォメーション"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "エクストルーダーを有効にする"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "インフォメーション"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "エクストルーダーを無効にする"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "材料をプリンターと同期"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "最近開いたファイルを開く"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "材料をプリンターと同期"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "ビジブル設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "簡単な数ステップの手順に従うことで、すべての材料プロファイルをプリンターと同期できるようになります。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "すべてのカテゴリを折りたたむ"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "材料プロファイルを同期する必要があるのはなぜですか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "視野のセッティングを管理する..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "開始"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "カメラ位置 (&C)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "サインイン"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "カメラビュー"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "材料プロファイルをDigital Factoryに接続されているすべてのプリンターと自動的に同期するには、Curaにサインインしている必要があります。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "パースペクティブ表示"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "材料をUSBで同期"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "平行投影表示"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "以下のプリンターは新しい材料プロファイルを受け取ります："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "ビルドプレート (&B)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "材料をプリンターに送信する際に問題が発生しました。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "タイプ表示"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "材料プロファイルが以下のプリンターと正常に同期されました："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "サポートとしてプリントされます。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "トラブルシューティング"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "このモデルに重なる他のモデルは修正されます。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "プリンターがありませんか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "このモデルとのインフィル交差は修正されます。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "すべてのプリンターの電源が入っていて、Digital Factoryに接続されていることを確認してください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "このモデルとの重なりはサポートされません。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "リストを更新"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "%1個の設定を上書きします。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "やり直してください"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "プロファイル"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "完了"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "アクティベート"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "同期"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "作成する"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "スライス"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "プリンターが見つかりません"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "互換性のあるプリンターがDigital Factoryに接続されていないようです。プリンターが接続されていて、最新のファームウェアが実行されていることを確認してください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Digital Factoryにプリンターを接続する方法について詳しく見る"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "更新"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "材料プロファイルをUSB経由で同期する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "以下の手順に従って、新しい材料プロファイルをプリンターに読み込みます。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "材料アーカイブのエクスポートボタンをクリックします。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr ".ummファイルをUSBメモリーに保存します。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "USBメモリーをプリンターに差し込み、新しい材料プロファイルを読み込む手順を開始します。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "新しい材料プロファイルをプリンターに読み込む方法"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "戻る"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "材料アーカイブのエクスポート"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "すべての材料を書き出す"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "複製"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "名を変える"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "取り込む"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "書き出す"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "プロファイルを作る"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "このプロファイルの名前を指定してください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "複製"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "プロファイルを複製する"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "書き出す"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "モデルを取り除きました"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "%1を取り外しますか？この作業はやり直しが効きません！"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "プロファイル名を変える"
+msgid "Import Material"
+msgstr "フィラメントを取り込む"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "プロファイルを取り込む"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "フィラメント<filename>%1</filename>の取り込みに成功しました"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "<filename>%1</filename>フィラメントを取り込むことができない: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "プロファイルを書き出す"
+msgid "Export Material"
+msgstr "フィラメントを書き出す"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "プリンター:%1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "フィラメントの書き出しに失敗しました <filename>%1</filename>: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "フィラメントの<filename>%1</filename>への書き出しが完了ました"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "プロファイルを現在のセッティング"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "このプロファイルはプリンターによりデフォルトを使用、従いこのプロファイルはセッティング/書き換えが以下のリストにありません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "設定は選択したプロファイルにマッチしています。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "グローバル設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "一般"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "プロファイルを作る"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "このプロファイルの名前を指定してください。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "プロファイルを書き出す"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "プロファイルを複製する"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "プロファイル名を変える"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "プロファイルを取り込む"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "インターフェイス"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "通貨:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "テーマ:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "それらの変更を有効にするためにはアプリケーションを再起動しなけらばなりません。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "セッティングを変更すると自動にスライスします。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "自動的にスライスする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "ビューポイント機能"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "赤でサポートができないエリアをハイライトしてください。サポートがない場合、正確にプリントができない場合があります。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "ディスプレイオーバーハング"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "モデルの欠けている部分または不要な表面部分を、警告マークを使用してハイライトします。ツールパスは意図したジオメトリの欠けている部分になることが多くあります。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "モデルエラーを表示"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "モデルの選択時にモデルがカメラの中心に見えるようにカメラを移動する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "アイテムを選択するとカメラが中心にきます"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Curaのデフォルトのズーム機能は変更できるべきか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "カメラのズーム方向を反転する。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "ズームはマウスの方向に動くべきか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "マウスに対するズームは、正射投影ではサポートされていません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "マウスの方向にズームする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "交差を避けるためにプラットホーム上のモデルを移動するべきですか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "モデルの距離が離れているように確認する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "プラットホーム上のモデルはブルドプレートに触れるように下げるべきか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "自動的にモデルをビルドプレートに落とす"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "G-codeリーダーに注意メッセージを表示します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "G-codeリーダーに注意メッセージ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "レイヤーはコンパティビリティモードに強制されるべきか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "レイヤービューコンパティビリティモードを強制する。（再起動が必要）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Curaを終了した場所で開くようにしますか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "開始時にウィンドウの位置を復元"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "どのような種類のカメラレンダリングを使用する必要がありますか?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "カメラレンダリング:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "パースペクティブ表示"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "平行投影表示"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "ファイルを開くまた保存"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "デスクトップまたは外部アプリケーションから開いたファイルをCuraの同じインスタンスで開く必要がありますか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Curaの単一インスタンスを使用"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "Curaの単一インスタンスに新しいモデルをロードする前に、ビルドプレートをクリアする必要はありますか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "モデルを単一のインスタンスにロードする前にビルドプレートをクリア"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "モデルがビルドボリュームに対して大きすぎる場合はスケールされるべきか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "大きなモデルをスケールする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "ユニット値がミリメートルではなくメートルの場合、モデルが極端に小さく現れる場合があります。モデルはスケールアップされるべきですか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "極端に小さなモデルをスケールアップする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "モデルはロード後に選択しますか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "ロード後にモデルを選択"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "プリンター名の敬称はプリントジョブの名前に自動的に加えられるべきか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "プリンターの敬称をジョブネームに加える"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "プロジェクトファイルを保存時にサマリーを表示するべきか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "プロジェクトを保存時にダイアログサマリーを表示する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "プロジェクトファイルを開く際のデフォルト機能"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "プロジェクトファイル開く際のデフォルト機能: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "毎回確認する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "常にプロジェクトとして開く"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "常にモデルを取り込む"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "プロファイル内を変更し異なるプロファイルにしました、どこの変更点を保持、破棄したいのダイアログが表示されます、また何度もダイアログが表示されないようにデフォルト機能を選ぶことができます。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "プロファイル交換時に設定値を変更するためのデフォルト処理： "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "常に変更した設定を廃棄する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "常に変更した設定を新しいプロファイルに送信する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "プライバシー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "プリンターの不明なデータをUltimakerにおくりますか？メモ、モデル、IPアドレス、個人的な情報は送信されたり保存されたりはしません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(不特定な) プリントインフォメーションを送信"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "詳細"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "アップデート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Curaのプログラム開始時にアップデートがあるかチェックしますか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "スタート時にアップデートあるかどうかのチェック"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "アップデートを確認する際に、安定版リリースのみを確認します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "安定版リリースのみ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "アップデートを確認する際に、安定版とベータ版の両方のリリースを確認します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "安定版およびベータ版リリース"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Curaの起動時に毎回、新しいプラグインの自動チェックを行う場合は、この機能を無効にしないことを強くお勧めします!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "プラグインのアップデートを通知"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "インフォメーション"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "IP アドレスでプリンターを追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "直径変更の確認"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "プリンターのIPアドレスを入力します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "新しいフィラメントの直径は %1 mm に設定されています。これは現在のエクストルーダーに適応していません。続行しますか？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "ディスプレイ名"
+msgid "Could not connect to device."
+msgstr "デバイスに接続できません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "フィラメントタイプ"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Ultimakerプリンターに接続できませんか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "色"
+msgid "The printer at this address has not responded yet."
+msgstr "このアドレスのプリンターは応答していません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "プロパティ"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "このプリンタは不明なプリンタであるか、またはグループのホストではないため、追加できません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "密度"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "接続"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "直径"
+msgid "Release Notes"
+msgstr "リリースノート"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "フィラメントコスト"
+msgid "User Agreement"
+msgstr "ユーザー用使用許諾契約"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "フィラメントの重さ"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "同意する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "フィラメントの長さ"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "拒否して閉じる"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "毎メーターコスト"
+msgid "What's New"
+msgstr "新情報"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "次"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "このフィラメントは %1にリンクすプロパティーを共有する。"
+msgid "Add a Cloud printer"
+msgstr "クラウドプリンターを追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "フィラメントをリンクを外す"
+msgid "Waiting for Cloud response"
+msgstr "クラウドの応答を待機しています"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "記述"
+msgid "No printers found in your account?"
+msgstr "アカウントにプリンターが見つかりませんか？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "接着のインフォメーション"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "アカウントの以下のプリンターがCuraに追加されました："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "作成する"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "プリンタを手動で追加する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "複製"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "マーケットプレイスから材料設定とプラグインを追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "プリンターと同期する"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "材料設定とプラグインのバックアップと同期"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "プリンター"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Ultimakerコミュニティで48,000人以上のユーザーとアイデアを共有してアドバイスをもらう"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "フィラメントを取り込む"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "スキップ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "<filename>%1</filename>フィラメントを取り込むことができない: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "無料のUltimakerアカウントを作成"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "フィラメント<filename>%1</filename>の取り込みに成功しました"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Ultimaker Cura にようこそ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "フィラメントを書き出す"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"以下の手順で\n"
+"Ultimaker Cura を設定してください。数秒で完了します。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "フィラメントの書き出しに失敗しました <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "はじめに"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "フィラメントの<filename>%1</filename>への書き出しが完了ました"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "空にする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "材料をプリンターと同期"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "製造元"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "材料をプリンターと同期"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "プロファイル作成者"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "簡単な数ステップの手順に従うことで、すべての材料プロファイルをプリンターと同期できるようになります。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "プリンター名"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "開始"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "プリンターに名前を付けてください"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "材料プロファイルを同期する必要があるのはなぜですか？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "プリンターの追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "サインイン"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "ネットワークプリンターの追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "材料プロファイルをDigital Factoryに接続されているすべてのプリンターと自動的に同期するには、Curaにサインインしている必要があります。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "非ネットワークプリンターの追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "材料をUSBで同期"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "ネットワークにプリンターはありません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "以下のプリンターは新しい材料プロファイルを受け取ります："
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "更新"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "材料をプリンターに送信する際に問題が発生しました。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "IP でプリンターを追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "材料プロファイルが以下のプリンターと正常に同期されました："
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "クラウドプリンターを追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "トラブルシューティング"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "プリンターがありませんか？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ultimaker Cura の改善にご協力ください"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "すべてのプリンターの電源が入っていて、Digital Factoryに接続されていることを確認してください。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "リストを更新"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "やり直してください"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "完了"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura は、印刷品質とユーザーエクスペリエンスを向上させるために以下の匿名データを収集します:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "同期"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "プリンターのタイプ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "スライス"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "材料の利用状況"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "プリンターが見つかりません"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "スライスの数"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "互換性のあるプリンターがDigital Factoryに接続されていないようです。プリンターが接続されていて、最新のファームウェアが実行されていることを確認してください。"
+msgid "Print settings"
+msgstr "プリント設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Digital Factoryにプリンターを接続する方法について詳しく見る"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura が収集したデータには個人データは含まれません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "更新"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "詳細"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "材料プロファイルをUSB経由で同期する"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "オブジェクトリスト"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "以下の手順に従って、新しい材料プロファイルをプリンターに読み込みます。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "サポートとしてプリントされます。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "材料アーカイブのエクスポートボタンをクリックします。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "このモデルに重なる他のモデルは修正されます。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr ".ummファイルをUSBメモリーに保存します。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "このモデルとのインフィル交差は修正されます。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "USBメモリーをプリンターに差し込み、新しい材料プロファイルを読み込む手順を開始します。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "このモデルとの重なりはサポートされません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "新しい材料プロファイルをプリンターに読み込む方法"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "%1個の設定を上書きします。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "材料アーカイブのエクスポート"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "キャンセルしたプリンター"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "すべての材料を書き出す"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "プリンターのプリセット"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "視野設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "クラウドプリンターがオフラインです。プリンターの電源が入っている状態で、インターネットに接続されているかどうかを確認してください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "全てを調べる"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "このプリンターはお使いのアカウントにリンクされていません。Ultimaker Digital Factoryにアクセスして接続を確立してください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "プリンター"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "クラウド接続は現在利用できません。サインインしてクラウドプリンターに接続してください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "計算された"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "クラウド接続は現在利用できません。インターネット接続を確認してください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "プリンターの追加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "プロファイル"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "プリンター管理"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "現在"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "ユニット"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "無題"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "プリンターにつながっていません"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "今プリンタはコマンドを処理できません"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "メンテナンス。プリンターをチェックしてください"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "プリンターへの接続が切断されました"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "プリント中..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "一時停止しました"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "準備中..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "造形物を取り出してください"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "プリント中止"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "本当にプリントを中止してもいいですか？"
 
-# can’t enter japanese
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "選択したモデルを%1で印刷する"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "マイプリンター"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Ultimaker Digital Factoryでプリンターをモニタリングします。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Digital Libraryでプリントプロジェクトを作成します。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "プリントジョブ"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "プリントジョブをモニタリングしてプリント履歴から再プリントします。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Ultimaker Curaをプラグインと材料プロファイルで拡張します。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Ultimaker eラーニングで3Dプリンティングのエキスパートになります。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Ultimakerのサポート"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"いくらかの非表示設定は通常の計算された値と異なる値を使用します。\n"
+"表示されるようにクリックしてください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Ultimaker Curaの使用を開始する方法を確認します。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "検索設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "質問をする"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "すべてのエクストルーダーの値をコピーする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Ultimaker Communityをご参照ください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "すべてのエクストルーダーに対して変更された値をコピーする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "バグを報告"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "この設定を非表示にする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "問題が発生していることを開発者にお知らせください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "この設定を表示しない"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Ultimakerウェブサイトをご確認ください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "常に見えるように設定する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "プリンターコントロール"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "視野のセッティングを構成する..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "ジョグの位置"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "影響を与えるすべての設定がオーバーライドされるため、この設定は使用されません。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "影響"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "次によって影響を受ける"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "ジョグの距離"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "この設定は常に全てのエクストルーダーに共有されています。ここですべてのエクストルーダーの数値を変更できます。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "G-codeの送信"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "カスタムG-codeコマンドを接続されているプリンターに送信します。「Enter」を押してコマンドを送信します。"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "この設定はエクストルーダー固有の競合する値から取得します:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "エクストルーダー"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "ホットエンドの目標温度。ホットエンドはこの温度に向けて上がったり下がったりします。これが0の場合、ホットエンドの加熱はオフになっています。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "このホットエンドの現在の温度です。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "ホットエンドをプリヒートする温度です。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "キャンセル"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "プレヒート"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "プリント開始前にホットエンドを加熱します。加熱中もプリントの調整を行えます、またホットエンドが加熱するまでプリント開始を待つ必要もありません。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "エクストルーダーのマテリアルの色。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "エクストルーダー入ったフィラメント。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "ノズルが入ったエクストルーダー。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "このプリンターはつながっていません。"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"この設定にプロファイルと異なった値があります。\n"
+"プロファイルの値を戻すためにクリックしてください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "ビルドプレート"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "ヒーティッドベッドの目標温度。ベッドはこの温度に向けて上がったり下がったりします。これが0の場合、ベッドの加熱はオフになっています。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "現在のヒーティッドベッドの温度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "ベッドのプリヒート温度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "プリント開始前にベッドを加熱します。加熱中もプリントの調整を行えます、またべットが加熱するまでプリント開始を待つ必要もありません。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "サインイン"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- マーケットプレースから材料プロファイルとプラグインを追加\n"
-"- 材料プロファイルとプラグインのバックアップと同期\n"
-"- Ultimakerコミュニティで48,000人以上のユーザーとアイデアを共有してアドバイスをもらう"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "無料のUltimakerアカウントを作成"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "最終更新：%1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimakerアカウント"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "サインアウト"
+"このセッティングは通常計算されます、今は絶対値に固定されています。\n"
+"計算された値に変更するためにクリックを押してください。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "確認しています..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "アカウント同期"
+msgid "Active print"
+msgstr "プリントをアクティベートする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "問題が発生しました..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "保留中の更新をインストール"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "アカウントの更新を確認"
+msgid "Job Name"
+msgstr "ジョブネーム"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "無題"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "プリント時間"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "選択するアイテムがありません"
+msgid "Estimated time left"
+msgstr "残り時間"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "オンラインでトラブルシューティングガイドを表示する"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "留め金 フルスクリーン"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "全画面表示を終了する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&取り消す"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&やりなおす"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&やめる"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "3Dビュー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "フロントビュー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "トップビュー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "底面図"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "左サイドビュー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "右サイドビュー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Curaを構成する..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "＆プリンターを追加する..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "プリンターを管理する..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "フィラメントを管理する..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "マーケットプレイスから材料を追加"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&現在の設定/無効にプロファイルをアップデートする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&変更を破棄する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&今の設定/無効からプロファイルを作成する..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "プロファイルを管理する..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "オンラインドキュメントを表示する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "報告＆バグ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "新情報"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "アバウト..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "選択内容を削除"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "選択内容を中央に移動"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "選択内容を増倍"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "モデルを消去する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "プラットホームの中心にモデルを配置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "&モデルグループ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "モデルを非グループ化"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "モ&デルの合体"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&モデルを増倍する..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "すべてのモデル選択"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "ビルドプレート上のクリア"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "すべてのモデルを読み込む"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "すべてのモデルをすべてのビルドプレートに配置"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "すべてのモデルをアレンジする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "選択をアレンジする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "すべてのモデルのポジションをリセットする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "すべてのモデル＆変更点をリセットする"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&ファイルを開く(s)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&新しいプロジェクト..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "コンフィグレーションのフォルダーを表示する"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "視野のセッティングを構成する..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&マーケットプレース"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "影響を与えるすべての設定がオーバーライドされるため、この設定は使用されません。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "影響"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "次によって影響を受ける"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "この設定は常に全てのエクストルーダーに共有されています。ここですべてのエクストルーダーの数値を変更できます。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "この設定はエクストルーダー固有の競合する値から取得します:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"この設定にプロファイルと異なった値があります。\n"
-"プロファイルの値を戻すためにクリックしてください。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"このセッティングは通常計算されます、今は絶対値に固定されています。\n"
-"計算された値に変更するためにクリックを押してください。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "検索設定"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "すべてのエクストルーダーの値をコピーする"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "すべてのエクストルーダーに対して変更された値をコピーする"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "この設定を非表示にする"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "この設定を表示しない"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "常に見えるように設定する"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"いくらかの非表示設定は通常の計算された値と異なる値を使用します。\n"
-"表示されるようにクリックしてください。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "このパッケージは再起動後にインストールされます。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "設定"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1を閉じています"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "%1を終了しますか？"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "パッケージをインストール"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3Dビュー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "ファイルを開く(s)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "フロントビュー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "選択したファイルの中に複数のG-codeが存在します。1つのG-codeのみ一度に開けます。G-codeファイルを開く場合は、1点のみ選んでください。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "トップビュー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "プリンターを追加する"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "左ビュー"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "新情報"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "右ビュー"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "各モデル設定を与える。"
+msgid "Provides a prepare stage in Cura."
+msgstr "Curaで準備ステージを提供します。"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "各モデル設定ツール"
+msgid "Prepare Stage"
+msgstr "ステージの準備"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Curaプロファイルを取り込むためのサポートを供給する。"
+msgid "Provides support for exporting Cura profiles."
+msgstr "Curaプロファイルを書き出すためのサポートを供給する。"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Curaプロファイルリーダー"
+msgid "Cura Profile Writer"
+msgstr "Curaプロファイルライター"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "X3Dファイルを読むこむためのサポートを供給する。"
+msgid "Provides support for reading model files."
+msgstr "モデルファイルを読み込むためのサポートを供給します。"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3Dリーダー"
+msgid "Trimesh Reader"
+msgstr "Trimeshリーダー"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "構成をバックアップしてリストアします。"
+msgid "Checks for firmware updates."
+msgstr "ファームウェアアップデートをチェックする。"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura バックアップ"
+msgid "Firmware Update Checker"
+msgstr "ファームウェアアップデートチェッカー"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "プリンターの設定を変更（印刷ボリューム、ノズルサイズ、その他）"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "クラッシュレポーターで使用できるように、特定のイベントをログに記録します"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "プリンターの設定アクション"
+msgid "Sentry Logger"
+msgstr "監視ロガー"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "特定箇所のサポートを印刷するブロックを消去するメッシュを作成する"
+msgid "Provides a monitor stage in Cura."
+msgstr "Curaでモニターステージを提供します。"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "サポート消去機能"
+msgid "Monitor Stage"
+msgstr "モニターステージ"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5805,105 +5970,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "取り外し可能なドライブアウトプットデバイスプラグイン"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "ファームウェアアップデートのためのマシン操作を提供します。"
+msgid "Provides support for reading AMF files."
+msgstr "AMFファイルの読込みをサポートしています。"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "ファームウェアアップデーター"
+msgid "AMF Reader"
+msgstr "AMFリーダー"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "レガシーCura Versionsからプロファイルを取り込むためのサポートを供給する。"
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Ultimakerフォーマットパッケージの読み込みをサポートします。"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "レガシーCuraプロファイルリーダー"
+msgid "UFP Reader"
+msgstr "UFP リーダー"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "３MFファイルを読むこむためのサポートを供給する。"
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Digital Libraryに接続し、CuraでDigital Libraryからファイルを開いたりDigital Libraryにファイルを保存したりできるようにします。"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MFリーダー"
+msgid "Ultimaker Digital Library"
+msgstr "Ultimaker Digital Library"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Ultimakerフォーマットパッケージへの書き込みをサポートします。"
+msgid "Provides the Per Model Settings."
+msgstr "各モデル設定を与える。"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFPライター"
+msgid "Per Model Settings Tool"
+msgstr "各モデル設定ツール"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "クラッシュレポーターで使用できるように、特定のイベントをログに記録します"
+msgid "Provides a machine actions for updating firmware."
+msgstr "ファームウェアアップデートのためのマシン操作を提供します。"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "監視ロガー"
+msgid "Firmware Updater"
+msgstr "ファームウェアアップデーター"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "g-codeファイルからプロファイルを読み込むサポートを供給する。"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Ultimakerのネットワーク接属できるプリンターのネットワーク接続を管理します。"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-codeプロファイルリーダー"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimakerネットワーク接続"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Curaでプレビューステージを提供します。"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "プリント問題の可能性のあるモデルをプリント構成を確認し、解決案を提示してください。"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "プレビューステージ"
+msgid "Model Checker"
+msgstr "モデルチェッカー"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "透視ビューイング。"
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "透視ビュー"
+msgid "Simulation View"
+msgstr "シミュレーションビュー"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "CuraEngineスライシングバックエンドにリンクを供給する。"
+msgid "Writes g-code to a file."
+msgstr "ファイルにG-codeを書き込みます。"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Curaエンジンバックエンド"
+msgid "G-code Writer"
+msgstr "G-codeライター"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "AMFファイルの読込みをサポートしています。"
+msgid "Provides support for writing 3MF files."
+msgstr "３MFファイルを読むこむためのサポートを供給する。"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMFリーダー"
+msgid "3MF Writer"
+msgstr "3MFリーダー"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -5915,175 +6080,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "圧縮G-codeリーダー"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "後処理のためにユーザーが作成したスクリプト用拡張子"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "XMLベースフィラメントのプロファイルを読み書きするための機能を供給する。"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "後処理"
+msgid "Material Profiles"
+msgstr "フィラメントプロファイル"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Curaプロファイルを書き出すためのサポートを供給する。"
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "CuraEngineスライシングバックエンドにリンクを供給する。"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Curaプロファイルライター"
+msgid "CuraEngine Backend"
+msgstr "Curaエンジンバックエンド"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "G-codeを承認し、プリンターに送信する。またプラグインはファームウェアをアップデートできます。"
+msgid "Provides support for reading X3D files."
+msgstr "X3Dファイルを読むこむためのサポートを供給する。"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USBプリンティング"
+msgid "X3D Reader"
+msgstr "X3Dリーダー"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Curaで準備ステージを提供します。"
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "2Dの画像ファイルからプリント可能なジオメトリーを生成を可能にする。"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "ステージの準備"
+msgid "Image Reader"
+msgstr "画像リーダー"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "G-codeファイルの読み込み、表示を許可する。"
+msgid "Provides support for reading 3MF files."
+msgstr "３MFファイルを読むこむためのサポートを供給する。"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-codeリーダー"
+msgid "3MF Reader"
+msgstr "3MFリーダー"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "2Dの画像ファイルからプリント可能なジオメトリーを生成を可能にする。"
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Ultimakerフォーマットパッケージへの書き込みをサポートします。"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "画像リーダー"
+msgid "UFP Writer"
+msgstr "UFPライター"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Ultimakerのプリンターのアクションを供給する（ベッドレベリングウィザード、アップグレードの選択、他）"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "レガシーCura Versionsからプロファイルを取り込むためのサポートを供給する。"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimkerプリンターのアクション"
+msgid "Legacy Cura Profile Reader"
+msgstr "レガシーCuraプロファイルリーダー"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "圧縮ファイルにG-codeを書き込みます。"
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Cura 4.3からCura 4.4へのコンフィグレーションアップグレート。"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "圧縮G-codeライター"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "4.3から4.4にバージョンアップグレート"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "ファームウェアアップデートをチェックする。"
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Cura 2.1 からCura 2.2のコンフィグレーションアップグレート。"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "ファームウェアアップデートチェッカー"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "2.1 から2.2にバージョンアップグレート"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "不特定なスライス情報を提出。プレファレンスの中で無効になる可能性もある。"
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "コンフィギュレーションを Cura 4.1 から Cura 4.2 にアップグレートする。"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "スライスインフォメーション"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "4.0 から 4.1 にバージョンアップグレート"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "XMLベースフィラメントのプロファイルを読み書きするための機能を供給する。"
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "フィラメントプロファイル"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Digital Libraryに接続し、CuraでDigital Libraryからファイルを開いたりDigital Libraryにファイルを保存したりできるようにします。"
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Cura 4.5からCura 4.6に設定をアップグレードします。"
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Ultimaker Digital Library"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "バージョン4.5から4.6へのアップグレード"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "新しいCuraパッケージを検索、管理、インストールします。"
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Cura 3.3からCura 3.4のコンフィグレーションアップグレート。"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "ツールボックス"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "3.3から3.4にバージョンアップグレート"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "ファイルにG-codeを書き込みます。"
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Cura 4.8からCura 4.9に設定をアップグレードします。"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-codeライター"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "バージョン4.8から4.9へのアップグレード"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "シミュレーションビューを提供します。"
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Cura 2.7からCura 3.0のコンフィグレーションアップグレート。"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "シミュレーションビュー"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "2.7から3.0にバージョンアップグレート"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Cura 4.5からCura 4.6に設定をアップグレードします。"
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Cura 4.4からCura 4.5に設定をアップグレードします。"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "バージョン4.5から4.6へのアップグレード"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "4.4から4.5にバージョンアップグレート"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Cura 2.5 からCura 2.6のコンフィグレーションアップグレート。"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Cura 3.0からCura 3.1のコンフィグレーションアップグレート。"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "2.5から2.6にバージョンアップグレート"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "3.0から3.1にバージョンアップグレート"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6095,115 +6260,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "4.6.0から4.6.2へのバージョン更新"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Cura 4.7からCura 4.8に設定をアップグレードします。"
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Cura 2.6 からCura 2.7のコンフィグレーションアップグレート。"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "バージョン4.7から4.8へのアップグレード"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "2.6から2.7にバージョンアップグレート"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Cura 3.4 から Cura 3.5 のコンフィグレーションアップグレート。"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Cura 4.2からCura 4.3の設定をアップグレードします。"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "3.4 から 3.5 にバージョンアップグレート"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "4.2から4.3にバージョンをアップグレート"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Cura 2.1 からCura 2.2のコンフィグレーションアップグレート。"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Cura 4.0 から Cura 4.1 のコンフィグレーションアップグレート。"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "2.1 から2.2にバージョンアップグレート"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "4.0 から 4.1 にバージョンアップグレート"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Cura 3.2からCura 3.3のコンフィグレーションアップグレート。"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "構成をCura 4.6.2からCura 4.7に更新します。"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "3.2から3.3にバージョンアップグレート"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "4.6.2から4.7へのバージョン更新"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Cura 4.8からCura 4.9に設定をアップグレードします。"
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Cura 4.9からCura 4.10に設定をアップグレードします。"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "バージョン4.8から4.9へのアップグレード"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "バージョン4.9から4.10へのアップグレード"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "構成をCura 4.6.2からCura 4.7に更新します。"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Cura 2.2 からCura 2.4のコンフィグレーションアップグレート。"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "4.6.2から4.7へのバージョン更新"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "2.2 から2.4にバージョンアップグレート"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Cura 4.2からCura 4.3の設定をアップグレードします。"
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Cura 3.2からCura 3.3のコンフィグレーションアップグレート。"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "4.2から4.3にバージョンをアップグレート"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "3.2から3.3にバージョンアップグレート"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Cura 4.3からCura 4.4へのコンフィグレーションアップグレート。"
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Cura 2.5 からCura 2.6のコンフィグレーションアップグレート。"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "4.3から4.4にバージョンアップグレート"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "2.5から2.6にバージョンアップグレート"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Cura 4.9からCura 4.10に設定をアップグレードします。"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Cura 3.5 から Cura 4.0 のコンフィグレーションアップグレート。"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "バージョン4.9から4.10へのアップグレード"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "3.5 から 4.0 にバージョンアップグレート"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Cura 2.7からCura 3.0のコンフィグレーションアップグレート。"
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Cura 3.4 から Cura 3.5 のコンフィグレーションアップグレート。"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "2.7から3.0にバージョンアップグレート"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "3.4 から 3.5 にバージョンアップグレート"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Cura 2.6 からCura 2.7のコンフィグレーションアップグレート。"
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Cura 4.7からCura 4.8に設定をアップグレードします。"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "2.6から2.7にバージョンアップグレート"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "バージョン4.7から4.8へのアップグレード"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6215,105 +6380,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "バージョン4.11から4.12へのアップグレード"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Cura 3.3からCura 3.4のコンフィグレーションアップグレート。"
+msgid "Backup and restore your configuration."
+msgstr "構成をバックアップしてリストアします。"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "3.3から3.4にバージョンアップグレート"
+msgid "Cura Backups"
+msgstr "Cura バックアップ"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Cura 3.0からCura 3.1のコンフィグレーションアップグレート。"
+msgid "Provides support for importing Cura profiles."
+msgstr "Curaプロファイルを取り込むためのサポートを供給する。"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "3.0から3.1にバージョンアップグレート"
+msgid "Cura Profile Reader"
+msgstr "Curaプロファイルリーダー"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Cura 4.0 から Cura 4.1 のコンフィグレーションアップグレート。"
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "不特定なスライス情報を提出。プレファレンスの中で無効になる可能性もある。"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "4.0 から 4.1 にバージョンアップグレート"
+msgid "Slice info"
+msgstr "スライスインフォメーション"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Cura 4.4からCura 4.5に設定をアップグレードします。"
+msgid "Provides support for importing profiles from g-code files."
+msgstr "g-codeファイルからプロファイルを読み込むサポートを供給する。"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "4.4から4.5にバージョンアップグレート"
+msgid "G-code Profile Reader"
+msgstr "G-codeプロファイルリーダー"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Cura 2.2 からCura 2.4のコンフィグレーションアップグレート。"
+msgid "Writes g-code to a compressed archive."
+msgstr "圧縮ファイルにG-codeを書き込みます。"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "2.2 から2.4にバージョンアップグレート"
+msgid "Compressed G-code Writer"
+msgstr "圧縮G-codeライター"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "コンフィギュレーションを Cura 4.1 から Cura 4.2 にアップグレートする。"
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "後処理のためにユーザーが作成したスクリプト用拡張子"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "4.0 から 4.1 にバージョンアップグレート"
+msgid "Post Processing"
+msgstr "後処理"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Cura 3.5 から Cura 4.0 のコンフィグレーションアップグレート。"
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "特定箇所のサポートを印刷するブロックを消去するメッシュを作成する"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "3.5 から 4.0 にバージョンアップグレート"
+msgid "Support Eraser"
+msgstr "サポート消去機能"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Ultimakerのネットワーク接属できるプリンターのネットワーク接続を管理します。"
+msgid "Provides a preview stage in Cura."
+msgstr "Curaでプレビューステージを提供します。"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimakerネットワーク接続"
+msgid "Preview Stage"
+msgstr "プレビューステージ"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "モデルファイルを読み込むためのサポートを供給します。"
+msgid "Provides the X-Ray view."
+msgstr "透視ビューイング。"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimeshリーダー"
+msgid "X-Ray View"
+msgstr "透視ビュー"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Ultimakerフォーマットパッケージの読み込みをサポートします。"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Ultimakerのプリンターのアクションを供給する（ベッドレベリングウィザード、アップグレードの選択、他）"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP リーダー"
+msgid "Ultimaker machine actions"
+msgstr "Ultimkerプリンターのアクション"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6325,35 +6500,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "ソリッドビュー"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "３MFファイルを読むこむためのサポートを供給する。"
+msgid "Allows loading and displaying G-code files."
+msgstr "G-codeファイルの読み込み、表示を許可する。"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MFリーダー"
+msgid "G-code Reader"
+msgstr "G-codeリーダー"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Curaでモニターステージを提供します。"
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "プリンターの設定を変更（印刷ボリューム、ノズルサイズ、その他）"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "モニターステージ"
+msgid "Machine Settings Action"
+msgstr "プリンターの設定アクション"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "プリント問題の可能性のあるモデルをプリント構成を確認し、解決案を提示してください。"
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "G-codeを承認し、プリンターに送信する。またプラグインはファームウェアをアップデートできます。"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "モデルチェッカー"
+msgid "USB printing"
+msgstr "USBプリンティング"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "材料をプリンターと同期"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "変更を有効にするために{}を終了して再始動する必要があります。"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "同期中..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Ultimakerアカウントから変更が検出されました"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "材料パッケージとソフトウェアパッケージをアカウントと同期しますか？"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "同期"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "拒否してアカウントから削除"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "{}プラグインのダウンロードに失敗しました"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "プラグインライセンス同意書"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "画像を変換する..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "ビルドプレート上の幅ミリメートル。"
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "マーケットプレース"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "パッケージへの変更を有効にするためにCuraを再起動する必要があります。"
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "インストール"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "インストールした"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "プレミアム"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "ウェブマーケットプレイスに移動"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "材料を検索"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "互換性"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "プリンター"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "ビルドプレート"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "サポート"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "品質"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "技術データシート"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "安全データシート"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "印刷ガイドライン"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "ウェブサイト"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "インストールまたはアップデートには<a href='%1'>ログイン</a>が必要です"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>材料スプールの購入</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "アップデート"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "更新中"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "更新済み"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "戻る"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "プラグイン"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "インストールした"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "再起動時にインストール"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "アップデートには<a href='%1'>ログイン</a>が必要です"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "ダウングレード"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "アンインストール"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "地域貢献"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "コミュニティプラグイン"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "汎用材料"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "パッケージ取得中..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "ウェブサイト"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "電子メール"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "検証済みのUltimaker Cura Enterprise用プラグインおよび材料を入手するにはサインインしてください"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "バージョン"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "最終更新日"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "ダウンロード"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "インストールされたプラグイン"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "プラグインはインストールされていません。"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "インストールされた材料"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "材料はインストールされていません。"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "バンドルされたプラグイン"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "バンドルされた材料"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Curaパッケージデータベースに接続できません。接続を確認してください。"
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "パッケージをインストールするにはライセンスに同意する必要があります"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "アカウントにおける変更"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "無視"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "次のパッケージが追加されます:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "次のパッケージは、Curaバージョンに互換性がないため、インストールできません:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "アンインストール確認"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "使用中の材料またはプロファイルをアンインストールしようとしています。確定すると以下の材料/プロファイルをデフォルトにリセットします。"
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "材料"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "プロファイル"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "確認"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "このプリントの何かが問題です。クリックして調整のヒントをご覧ください。"
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "平面対象物を操作するためのライブラリーサポート"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "一部のプロファイル設定がカスタマイズされています。\n"
+#~ "これらの変更された設定をプロファイルの切り替え後も維持しますか？\n"
+#~ "変更を破棄して'%1'からデフォルトの設定を読み込むこともできます。"
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "ビルドプレート (&B)"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "作成する"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "複製"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "プリンター:%1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "プロファイルを現在のセッティング"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "テーマ:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "それらの変更を有効にするためにはアプリケーションを再起動しなけらばなりません。"
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "詳細"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "作成する"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "プリンターと同期する"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "プリンター"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "ユニット"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "オンラインでトラブルシューティングガイドを表示する"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "マーケットプレイスから材料を追加"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "すべてのモデルをすべてのビルドプレートに配置"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&マーケットプレース"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "新しいCuraパッケージを検索、管理、インストールします。"
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "ツールボックス"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "シミュレーションビューを提供します。"
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/ja_JP/fdmextruder.def.json.po b/resources/i18n/ja_JP/fdmextruder.def.json.po
index 42c81946c1..eab27df8c3 100644
--- a/resources/i18n/ja_JP/fdmextruder.def.json.po
+++ b/resources/i18n/ja_JP/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 14:59+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Japanese\n"
diff --git a/resources/i18n/ja_JP/fdmprinter.def.json.po b/resources/i18n/ja_JP/fdmprinter.def.json.po
index 21d5de8580..21dffe6651 100644
--- a/resources/i18n/ja_JP/fdmprinter.def.json.po
+++ b/resources/i18n/ja_JP/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:00+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Japanese <info@lionbridge.com>, Japanese <info@bothof.nl>\n"
@@ -60,7 +60,9 @@ msgctxt "machine_start_gcode description"
 msgid ""
 "G-code commands to be executed at the very start - separated by \n"
 "."
-msgstr "最初に実行するG-codeコマンドは、\nで区切ります。"
+msgstr ""
+"最初に実行するG-codeコマンドは、\n"
+"で区切ります。"
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
@@ -72,7 +74,9 @@ msgctxt "machine_end_gcode description"
 msgid ""
 "G-code commands to be executed at the very end - separated by \n"
 "."
-msgstr "最後に実行するG-codeコマンドは、\nで区切ります。"
+msgstr ""
+"最後に実行するG-codeコマンドは、\n"
+"で区切ります。"
 
 #: fdmprinter.def.json
 msgctxt "material_guid label"
@@ -490,8 +494,8 @@ msgstr "プリントヘッドとファンポリゴン"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "プリントヘッドの2Dシルエット（ファンキャップが含まれています）。"
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -765,6 +769,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "材料をフィーダーに送るホイールの直径。"
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "品質"
@@ -994,6 +1008,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "ウォールの数。厚さから計算された場合、この値は整数になります。"
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "外壁移動距離"
@@ -1025,14 +1089,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "撤回と移動距離を減らすために、壁のプリント順序を最適化します。ほとんどの部品がこの設定を有効にしている方が良い印刷結果につながりますが、実際には時間がかかることがありますので、最適化の有無に関わらず印刷時間を比較してください。ビルドプレートの接着タイプにブリムを選択すると最初のレイヤーは最適化されません。"
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "外壁優先"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "有効にすると、壁は外側から内側に順番に印刷します。これは、ABSのような高粘度のプラスチックを使用する際、XとYの寸法精度を改善するのに役立ちます。しかし、特にオーバーハング時に、外面の印刷品質を低下させる可能性があります。"
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1045,95 +1119,85 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "すべてのレイヤーごとに予備の壁を印刷します。このようにして、インフィルは余分な壁の間に挟まれ、より強い印刷物が得られる。"
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "壁補正"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "すでに壁が設置されている部品の壁の流れを補正します。"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "外壁補正"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "すでに壁が設置されている場所にプリントされている外壁の部分の流れを補う。"
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "内壁補正"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "すでに壁が設置されている場所にプリントされている内壁の部分の流れを補正します。"
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "最小壁フロー"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "ウォールラインに対する流れを最小割合にします。既存の壁に近い場合に、壁補正により壁の流れが減少します。壁の流れがこの値より低い場合は、移動に置き換えられます。この設定を使用する場合は、壁補正を有効にして、内装の前に外装を印刷する必要があります。"
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "引き戻し優先"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "有効にすると、フローが最小フローしきい値を下回っている壁を置き換える移動量より多い場合は、引き戻しを使用します。"
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "隙間充填"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "壁が入らない壁の隙間を埋める。"
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "対象外"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "薄壁印刷"
 
+# msgstr "薄い壁をプリントする"
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "全対象"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "ノズルサイズよりも細い壁を作ります。"
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "小さなギャップのフィルターアウト"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "モデル外部の塊を減らすために小さなギャップをフィルターアウトします。"
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "薄壁印刷"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
-# msgstr "薄い壁をプリントする"
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "ノズルサイズよりも細い壁を作ります。"
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2275,6 +2339,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "材料の冷却時の収縮を補正するために、モデルはこのスケールファクタでスケールされます。"
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "結晶性材料"
@@ -2788,24 +2872,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "最初の数層は印刷失敗の可能性を軽減させるために、設定した印刷スピードよりも遅く印刷されます。"
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "フィラメント均一速度"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "通常より細いラインを高速プリントするので、時間当たりのフィラメント押出量は同じです。薄いモデル部品は、設定よりも細い線幅でプリントすることが要求される場合があり、本設定はそのような線の速度を変更します。"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "均一フローの最大速度"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "吐出を均一にするための調整時の最高スピード。"
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4581,6 +4655,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "スカート/ブリム/ラフトをプリントする際のエクストルーダー。これはマルチエクストルージョン時に使用されます。"
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "スカートライン数"
@@ -4745,6 +4859,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "上のラフト層とラフト線の間の距離。間隔は線の幅と同じにして、サーフェスがソリッドになるようにします。"
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "ラフト中央厚さ"
@@ -5245,6 +5369,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "最大解像度設定の解像度を下げるときに許容される最大偏差です。これを大きくすると印刷の精度は低くなりますが、g-codeは小さくなります。最大偏差は最大解像度の限度であるため、最大偏差でこの2つが競合する場合には常にtrueとなります。"
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "特別モード"
@@ -6551,6 +6685,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "最初のレイヤーの小型形体は通常のプリント速度に対してこの割合でプリントされます。低速でプリントすると、接着と精度が向上します。"
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "コマンドライン設定"
@@ -6610,6 +6774,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "ファイルから読み込むときに、モデルに適用するトランスフォーメーションマトリックス。"
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "プリントヘッドの2Dシルエット（ファンキャップが含まれています）。"
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "外壁優先"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "有効にすると、壁は外側から内側に順番に印刷します。これは、ABSのような高粘度のプラスチックを使用する際、XとYの寸法精度を改善するのに役立ちます。しかし、特にオーバーハング時に、外面の印刷品質を低下させる可能性があります。"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "壁補正"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "すでに壁が設置されている部品の壁の流れを補正します。"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "外壁補正"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "すでに壁が設置されている場所にプリントされている外壁の部分の流れを補う。"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "内壁補正"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "すでに壁が設置されている場所にプリントされている内壁の部分の流れを補正します。"
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "最小壁フロー"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "ウォールラインに対する流れを最小割合にします。既存の壁に近い場合に、壁補正により壁の流れが減少します。壁の流れがこの値より低い場合は、移動に置き換えられます。この設定を使用する場合は、壁補正を有効にして、内装の前に外装を印刷する必要があります。"
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "引き戻し優先"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "有効にすると、フローが最小フローしきい値を下回っている壁を置き換える移動量より多い場合は、引き戻しを使用します。"
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "隙間充填"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "壁が入らない壁の隙間を埋める。"
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "対象外"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "全対象"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "小さなギャップのフィルターアウト"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "モデル外部の塊を減らすために小さなギャップをフィルターアウトします。"
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "フィラメント均一速度"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "通常より細いラインを高速プリントするので、時間当たりのフィラメント押出量は同じです。薄いモデル部品は、設定よりも細い線幅でプリントすることが要求される場合があり、本設定はそのような線の速度を変更します。"
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "均一フローの最大速度"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "吐出を均一にするための調整時の最高スピード。"
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "最初に実行するG-codeコマンドは、\\n で区切ります。"
diff --git a/resources/i18n/ko_KR/cura.po b/resources/i18n/ko_KR/cura.po
index 47212666b9..5dba85f377 100644
--- a/resources/i18n/ko_KR/cura.po
+++ b/resources/i18n/ko_KR/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2022-01-10 11:57+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Korean <info@lionbridge.com>, Jinbum Kim <Jinbuhm.Kim@gmail.com>, Korean <info@bothof.nl>\n"
@@ -17,1428 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 3.0\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "사용자 데이터 디렉터리에서 압축 파일을 만들 수 없습니다: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122 /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "백업"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "적절한 데이터 또는 메타 데이터 없이 Cura 백업을 복원하려고 시도했습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "현재 버전보다 높은 Cura 백업을 복원하려고 시도했습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "다음의 오류는 Cura 백업을 복원하려고 시도하는 동안 발생했습니다:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "프린트를 시작하기 전에 재료 프로파일을 프린터와 동기화하십시오."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "새로운 재료가 설치됨"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "재료를 프린터와 동기화"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "자세히 알아보기"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "재료 아카이브를 {}에 저장할 수 없음:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "재료 아카이브를 저장하는 데 실패함"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "알 수 없는 오류입니다."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "\"프린팅 순서\"설정 값으로 인해 갠트리가 프린팅 된 모델과 충돌하지 않도록 출력물 높이가 줄어 들었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "출력물 크기"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "정말로 {0}을(를) 제거하시겠습니까? 이 작업을 실행 취소할 수 없습니다!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "재정의되지 않음"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "알 수 없는"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "아래 프린터는 그룹에 속해 있기 때문에 연결할 수 없습니다"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "사용 가능한 네트워크 프린터"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "준비"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura 프로파일"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "사용자 정의 프로파일"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "지원되는 모든 유형 ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "모든 파일 (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "뛰어난 외관"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "시각적 프로파일은 높은 시각적 및 표면 품질의 의도를 지니고 시각적 프로토타입과 모델을 인쇄하기 위해 설계되었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "엔지니어링 프로파일은 정확도를 개선하고 허용 오차를 좁히려는 의도로 기능 프로토타입 및 최종 사용 부품을 인쇄하도록 설계되었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "초안"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "초안 프로파일은 인쇄 시간을 상당히 줄이려는 의도로 초기 프로토타입과 컨셉트 확인을 인쇄하도록 설계되었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "사용자 정의 소재"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289 /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "사용자 정의"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "로그인 실패"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "객체의 새 위치 찾기"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "위치 찾기"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "모든 개체가 출력할 수 있는 최대 사이즈 내에 위치할 수 없습니다"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "위치를 찾을 수 없음"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "프린터와 동기화할 재료의 아카이브 저장에 실패했습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "프린터와 동기화할 재료의 아카이브 로드에 실패했습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "Digital Factory의 응답이 손상된 것 같습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "Digital Factory의 응답에 중요한 정보가 누락되었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "일부 프린터와 재료를 동기화하기 위한 Digital Factory 연결에 실패했습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Digital Factory 연결에 실패했습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "기기로드 중 ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "환경 설정을 설정하는 중..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "활성 기기 초기화 중..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "패키지 관리자 초기화 중..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "출력 사이즈 초기화 중..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "장면 설정 중..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "인터페이스 로드 중 ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "엔진 초기화 중..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "한 번에 하나의 G-코드 파일만 로드 할 수 있습니다. {0} 가져 오기를 건너 뛰었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809 /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "경고"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "G-코드가 로드되어 있으면 다른 파일을 열 수 없습니다. {0} 가져 오기를 건너 뛰었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "오류"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "건너뛰기"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72 /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "닫기"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "다음"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290 /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "종료"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "추가"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "취소"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "그룹 #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "외벽"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "내벽"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "스킨"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "내부채움"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "내부채움 서포트"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "지원하는 인터페이스"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "서포트"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "스커트"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "프라임 타워"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "움직임 경로"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "리트랙션"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "다른"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37 /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "릴리즈 노트를 열 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "큐라를 시작할 수 없습니다"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p> <b> 죄송합니다, Ultimaker Cura가 정상적이지 않습니다. </ p> </ b>\n"
-"                     <p> 시작할 때 복구 할 수없는 오류가 발생했습니다. 이 오류는 잘못된 구성 파일로 인해 발생할 수 있습니다. 설정을 백업하고 재설정하는 것이 좋습니다. </ p>\n"
-"                     <p> 백업은 설정 폴더에서 찾을 수 있습니다. </ p>\n"
-"                     <p> 문제를 해결하기 위해이 오류 보고서를 보내주십시오. </ p>\n"
-"                 "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "충돌 보고서를 Ultimaker에 보내기"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "충돌 리포트 보기"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "설정 폴더 보기"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "백업 및 리셋 설정"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "충돌 보고서"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>치명적인 오류가 발생했습니다. 문제를 해결할 수 있도록 이 충돌 보고서를 보내주십시오</p></b>\n"
-"            <p>\"보고서 전송\" 버튼을 사용하면 버그 보고서가 서버에 자동으로 전달됩니다</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "시스템 정보"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "알 수 없음"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Cura 버전"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Cura 언어"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "OS 언어"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "플랫폼"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qt 버전"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQt 버전"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "아직 초기화되지 않음<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGL 버전: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL 공급업체: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL Renderer: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "오류 추적"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "로그"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "보고서 전송"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "새 로그인 작업을 시작할 수 없습니다. 다른 로그인 작업이 진행 중인지 확인하십시오."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Ultimaker 계정 서버에 도달할 수 없음."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "로그인 실패"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "입력한 상태가 올바르지 않습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "계정 서버 인증 시간이 초과되었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "이 응용 프로그램을 인증할 때 필요한 권한을 제공하십시오."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "로그인을 시도할 때 예기치 못한 문제가 발생했습니다. 다시 시도하십시오."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "응답을 읽을 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "객체를 증가시키고 배치"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "개체 배치 중"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "개체 배치 중"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "지원되지 않음"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "노즐"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "익스트루더의 현재 가용성과 일치하도록 설정이 변경되었습니다:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "설정이 업데이트되었습니다"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "익스트루더 비활성화됨"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "파일이 이미 있습니다"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "파일 <filename>{0}</filename>이 이미 있습니다. 덮어 쓰시겠습니까?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459 /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "유효하지 않은 파일 URL:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "프로파일을 <filename>{0}</filename>: <message>{1}</message>로 내보내는데 실패했습니다"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "프로파일을 <filename>{0}</filename>로 내보내지 못했습니다. Writer 플러그인이 오류를 보고했습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "프로파일을 <filename>{0}</filename> 에 내보냅니다"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "내보내기 완료"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다 {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "프린터가 추가되기 전 <filename>{0}</filename>에서 프로파일을 가져올 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "<filename>{0}</filename>(으)로 가져올 사용자 정의 프로파일이 없습니다"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "프로파일 <filename>{0}</filename>에는 정확하지 않은 데이터가 포함되어 있으므로, 불러올 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "프로파일 {0}을(를) 성공적으로 가져왔습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "파일 {0}에 유효한 프로파일이 포함되어 있지 않습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "프로파일 {0}에 알 수 없는 파일 유형이 있거나 손상되었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "사용자 정의 프로파일"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "프로파일에 품질 타입이 누락되었습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "아직 활성화된 프린터가 없습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "프로파일을 추가할 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "'{0}' 품질 타입은 현재 활성 기기 정의 '{1}'와(과) 호환되지 않습니다."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "경고: 프로파일은 '{0}' 품질 타입을 현재 구성에 이용할 수 없기 때문에 찾을 수 없습니다. 이 품질 타입을 사용할 수 있는 재료/노즐 조합으로 전환하십시오."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "모델 별 설정"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "모델 별 설정 구성"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura 프로파일"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D 파일"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "백업 복원 시도 중 오류가 있었습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "백업"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "백업을 업로드하는 도중 오류가 있었습니다."
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "백업 생성 중..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "백업을 생성하는 도중 오류가 있었습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "업데이트 정보에 액세스 할 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "백업 업로드 중..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "사용자의 {machine_name}에서 새로운 기능 또는 버그 수정 사항을 사용할 수 있습니다! 완료하지 않은 경우 프린터의 펌웨어를 버전 {latest_version}으로 업데이트하는 것이 좋습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "백업이 업로드를 완료했습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "안정적인 신규 %s 펌웨어를 사용할 수 있습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "백업이 최대 파일 크기를 초과했습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "업데이트하는 방법"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "백업 관리"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "기기 설정"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "서포트 차단기"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "서포트가 프린팅되지 않는 볼륨을 만듭니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "이동식 드라이브"
+msgid "Monitor"
+msgstr "모니터"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "이동식 드라이브에 저장"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "이동식 드라이브  {0}에 저장"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "쓸 수있는 파일 형식이 없습니다!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "이동식 드라이브 <filename>{0}</filename>에 저장"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "저장"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "<filename>{0}</filename>: <message>{1}</message> 에 저장할 수 없습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "{device} 장치에 쓸 때 파일 이름을 찾을 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "이동식 드라이브  {0}: {1} 에 저장할 수 없습니다 :"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "오류"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "이동식 드라이브 {0}에 {1}로 저장되었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "파일이 저장됨"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "꺼내기"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "이동식 장치 {0} 꺼내기"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0}가 배출됐습니다. 이제 드라이브를 안전하게 제거 할 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "하드웨어 안전하게 제거"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "{0}를 배출하지 못했습니다. 다른 프로그램이 드라이브를 사용 중일 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "펌웨어 업데이트"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 프로파일"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "추천"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "사용자 정의"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "프로젝트 파일 <filename>{0}</filename>에 알 수 없는 기기 유형 <message>{1}</message>이(가) 포함되어 있습니다. 기기를 가져올 수 없습니다. 대신 모델을 가져옵니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "프로젝트 파일 열기"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "프로젝트 파일 <filename>{0}</filename>에 갑자기 접근할 수 없습니다: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "프로젝트 파일 열 수 없음"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "프로젝트 파일 <filename>{0}</filename>이 손상됨: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "프로젝트 파일 <filename>{0}</filename>이(가) 이 버전의 Ultimaker Cura에서 확인할 수 없는 프로파일을 사용하였습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27 /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF 파일"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "UFP 파일에 쓸 수 없음:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28 /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker 포맷 패키지"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code 파일"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "미리 보기"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "엑스레이 뷰"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "레이어 처리 중"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "정보"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "예기치 않은 오류로 인해 슬라이싱에 실패했습니다. 이슈 트래커에 버그를 보고하는 것을 고려하십시오."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "슬라이싱 실패"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "버그 보고"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Ultimaker Cura의 이슈 트래커에 버그 보고."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "선택한 소재 또는 구성과 호환되지 않기 때문에 현재 소재로 슬라이스 할 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "슬라이스 할 수 없습니다"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "현재 설정으로 슬라이스 할 수 없습니다. 다음 설정에는 오류가 있습니다 : {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "일부 모델별 설정으로 인해 슬라이스할 수 없습니다. 하나 이상의 모델에서 다음 설정에 오류가 있습니다. {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "프라임 타워 또는 위치가 유효하지 않아 슬라이스 할 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "비활성화된 익스트루더 %s(와)과 연결된 개체가 있기 때문에 슬라이스할 수 없습니다."
+msgid "Warning"
+msgstr "경고"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"설정을 검토하고 모델이 다음 사항에 해당하는지 확인하십시오.\n"
-"- 출력 사이즈 내에 맞춤화됨\n"
-"- 활성화된 익스트루더로 할당됨\n"
-"- 수정자 메쉬로 전체 설정되지 않음"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "이동식 드라이브"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "AMF 파일"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17 /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "압축된 G-code 파일"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "후 처리"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G 코드 수정"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB 프린팅"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "USB를 통해 프린팅"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "USB를 통해 프린팅"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "USB를 통해 연결"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker 포맷 패키지"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USB 인쇄가 진행 중입니다. Cura를 닫으면 인쇄도 중단됩니다. 계속하시겠습니까?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "프린트가 아직 진행 중입니다. Cura는 이전 프린트가 완료될 때까지는 USB를 통해 다른 프린트를 시작할 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "프린트 진행 중"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "준비"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G 코드 파싱"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-코드 세부 정보"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "파일을 보내기 전에 g-코드가 프린터 및 프린터 구성에 적합한 지 확인하십시오. g-코드가 정확하지 않을 수 있습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G 파일"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG 이미지"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG 이미지"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG 이미지"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP 이미지"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF 이미지"
+msgid "Per Model Settings"
+msgstr "모델 별 설정"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "레벨 빌드 플레이트"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "모델 별 설정 구성"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "업그레이드 선택"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter는 텍스트 모드는 지원하지 않습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "업데이트 정보에 액세스 할 수 없습니다."
+msgid "Update Firmware"
+msgstr "펌웨어 업데이트"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "사용자의 {machine_name}에서 새로운 기능 또는 버그 수정 사항을 사용할 수 있습니다! 완료하지 않은 경우 프린터의 펌웨어를 버전 {latest_version}으로 업데이트하는 것이 좋습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "안정적인 신규 %s 펌웨어를 사용할 수 있습니다"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "업데이트하는 방법"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "예시 데이터 파일을 읽을 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "변경 사항이 적용되기 전에 {}을(를) 멈추고 다시 시작해야 합니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "동기화 중..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95 /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Ultimaker 계정에서 변경 사항이 감지되었습니다"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "귀하의 계정으로 재료와 소프트웨어 패키지를 동기화하시겠습니까?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "동기화"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "계정에서 거절 및 제거"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{}개의 플러그인을 다운로드하지 못했습니다"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "거절"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "동의"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "플러그인 사용 계약"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter는 텍스트가 아닌 모드는 지원하지 않습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "내보내기 전에 G-code를 준비하십시오."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "와이어 프린팅이 활성화되어 있을 때 Cura는 레이어를 정확하게 표시하지 않습니다."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura가 {0} 그룹의 호스트 프린터에 설치되지 않은 재료 프로파일을 감지했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "시뮬레이션 뷰"
+msgid "Sending materials to printer"
+msgstr "재료를 프린터로 전송 중"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "먼저 슬라이스해야 하기 때문에 아무것도 표시되지 않습니다."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "연결 시도 중인 {0}이(가) 그룹의 호스트가 아닙니다. 웹 페이지에서 그룹 호스트로 설정할 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "표시할 레이어 없음"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "다시 메시지 표시 안 함"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "레이어 뷰"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "네트워크를 통해 프린팅"
+msgid "Not a group host"
+msgstr "그룹 호스트 아님"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "네트워크를 통해 프린팅"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "그룹 설정"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "네트워크를 통해 연결됨"
+msgid "Sending Print Job"
+msgstr "인쇄 작업 전송"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "내일"
+msgid "Uploading print job to printer."
+msgstr "프린트 작업을 프린터로 업로드하고 있습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "오늘"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "프린트 작업 대기열이 가득 찼습니다. 프린터가 새 작업을 수락할 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "네트워크를 통해 연결"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "대기열 가득 참"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "현재 작업이 전송될 때까지 기다려주십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "프린트 오류"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "출력 작업이 프린터에 성공적으로 보내졌습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "데이터 전송 됨"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Ultimaker Connect를 실행하지 않는 프린터에 연결하려 합니다. 프린터를 최신 펌웨어로 업데이트해 주십시오."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "프린터 업데이트"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "프린트 작업 대기열이 가득 찼습니다. 프린터가 새 작업을 수락할 수 없습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "대기열 가득 참"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "인쇄 작업 전송"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "프린트 작업을 프린터로 업로드하고 있습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura가 {0} 그룹의 호스트 프린터에 설치되지 않은 재료 프로파일을 감지했습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "재료를 프린터로 전송 중"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "데이터를 프린터로 업로드할 수 없음."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "네트워크 오류"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "연결 시도 중인 {0}이(가) 그룹의 호스트가 아닙니다. 웹 페이지에서 그룹 호스트로 설정할 수 있습니다."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "그룹 호스트 아님"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "그룹 설정"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1448,133 +296,153 @@ msgstr ""
 "<b>{printer_name}</b> 프린터를 클라우드를 통해 연결할 수 있습니다.\n"
 " 프린터를 Digital Factory에 연결하는 모든 위치에서 프린트 대기열을 관리하고 프린트를 모니터링합니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "클라우드 프린팅이 준비되었습니까?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "시작하기"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "자세히 알아보기"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Cloud를 통해 프린팅"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Ultimaker Connect를 실행하지 않는 프린터에 연결하려 합니다. 프린터를 최신 펌웨어로 업데이트해 주십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "프린터 업데이트"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "데이터를 프린터로 업로드할 수 없음."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "네트워크 오류"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "네트워크를 통해 프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Cloud를 통해 프린팅"
+msgid "Print over network"
+msgstr "네트워크를 통해 프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Cloud를 통해 연결됨"
+msgid "Connected over the network"
+msgstr "네트워크를 통해 연결됨"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "프린트 모니터링"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "내일"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Ultimaker Digital Factory에서 프린트 추적"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "오늘"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "프린트 작업 업로드 시 알 수 없는 오류 코드: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "네트워크를 통해 연결"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Ultimaker 계정에서 새 프린터가 감지되었습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "사용자 계정에서 프린터 {name}({model}) 추가"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
 msgid_plural "... and {0} others"
 msgstr[0] "... 및 기타 {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Digital Factory에서 프린터 추가:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "일부 프린터에서는 클라우드 연결을 사용할 수 없습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "다음 프린터는 Digital Factory에 연결되어 있지 않습니다:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "연결을 설정하려면 {website_link}에 방문하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "프린터 구성 유지"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "프린터 제거"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "다음 계정 동기화 시까지 {printer_name}이(가) 제거됩니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "{printer_name}을(를) 영구적으로 제거하려면 {digital_factory_link}을(를) 방문하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "일시적으로 {printer_name}을(를) 제거하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "프린터를 제거하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1587,7 +455,7 @@ msgstr[0] ""
 "Cura에서 {0} 프린터를 제거하려고 합니다. 이 작업은 실행 취소할 수 없습니다. \n"
 "정말로 계속하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1596,2004 +464,3117 @@ msgstr ""
 "Cura에서 모든 프린터를 제거하려고 합니다. 이 작업은 실행 취소할 수 없습니다. \n"
 "정말로 계속하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Cloud를 통해 프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Cloud를 통해 프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Cloud를 통해 연결됨"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "프린트 모니터링"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Ultimaker Digital Factory에서 프린트 추적"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "프린트 작업 업로드 시 알 수 없는 오류 코드: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D 모델 도우미"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "강조 표시된 영역은 누락되거나 관련 없는 표면을 표시합니다. 모델을 수정하고 Cura에서 다시 엽니다."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>하나 이상의 3D 모델이 모델 크기 및 재료 구성으로 인해 최적의 상태로 인쇄되지 않을 수 있습니다.</p>\n"
+"<p>{model_names}</p>\n"
+"<p>인쇄 품질 및 안정성을 최고로 높이는 방법을 알아보십시오.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">인쇄 품질 가이드 보기</a></p>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "와이어 프린팅이 활성화되어 있을 때 Cura는 레이어를 정확하게 표시하지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "모델 에러"
+msgid "Simulation View"
+msgstr "시뮬레이션 뷰"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "솔리드 뷰"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "먼저 슬라이스해야 하기 때문에 아무것도 표시되지 않습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "표시할 레이어 없음"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "다시 메시지 표시 안 함"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "레이어 뷰"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter는 텍스트가 아닌 모드는 지원하지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "내보내기 전에 G-code를 준비하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code 파일"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "3MF 파일 작성 중 오류."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "3MF 기록기 플러그인이 손상되었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "작성할 작업 환경이 없습니다. 프린터를 먼저 추가하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "여기서 작업 환경을 작성할 권한이 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "운영 체제가 프로젝트 파일을 이 위치로 또는 이 파일명으로 저장하지 못합니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "3MF 파일"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Cura 프로젝트 3MF 파일"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "모니터"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "압축된 G-code 파일"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "예기치 않은 오류로 인해 슬라이싱에 실패했습니다. 이슈 트래커에 버그를 보고하는 것을 고려하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "슬라이싱 실패"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "버그 보고"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Ultimaker Cura의 이슈 트래커에 버그 보고."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "선택한 소재 또는 구성과 호환되지 않기 때문에 현재 소재로 슬라이스 할 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D 모델 도우미"
+msgid "Unable to slice"
+msgstr "슬라이스 할 수 없습니다"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "현재 설정으로 슬라이스 할 수 없습니다. 다음 설정에는 오류가 있습니다 : {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "일부 모델별 설정으로 인해 슬라이스할 수 없습니다. 하나 이상의 모델에서 다음 설정에 오류가 있습니다. {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "프라임 타워 또는 위치가 유효하지 않아 슬라이스 할 수 없습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "비활성화된 익스트루더 %s(와)과 연결된 개체가 있기 때문에 슬라이스할 수 없습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>하나 이상의 3D 모델이 모델 크기 및 재료 구성으로 인해 최적의 상태로 인쇄되지 않을 수 있습니다.</p>\n"
-"<p>{model_names}</p>\n"
-"<p>인쇄 품질 및 안정성을 최고로 높이는 방법을 알아보십시오.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">인쇄 품질 가이드 보기</a></p>"
+"설정을 검토하고 모델이 다음 사항에 해당하는지 확인하십시오.\n"
+"- 출력 사이즈 내에 맞춤화됨\n"
+"- 활성화된 익스트루더로 할당됨\n"
+"- 수정자 메쉬로 전체 설정되지 않음"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "메쉬 유형"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "레이어 처리 중"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "일반 모델"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "정보"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "서포터로 프린팅"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D 파일"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "오버랩 설정 수정"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG 이미지"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "오버랩 지원 안함"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG 이미지"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "매쉬 내부채움 전용"
+msgid "PNG Image"
+msgstr "PNG 이미지"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "커팅 메쉬"
+msgid "BMP Image"
+msgstr "BMP 이미지"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "설정 선택"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF 이미지"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "이 모델에 맞게 사용자 정의 설정을 선택하십시오"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "노즐"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "필터..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "프로젝트 파일 <filename>{0}</filename>에 알 수 없는 기기 유형 <message>{1}</message>이(가) 포함되어 있습니다. 기기를 가져올 수 없습니다. 대신 모델을 가져옵니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "모두 보이기"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "프로젝트 파일 열기"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura 백업"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "프로젝트 파일 <filename>{0}</filename>에 갑자기 접근할 수 없습니다: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura 버전"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "프로젝트 파일 열 수 없음"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "기기"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "프로젝트 파일 <filename>{0}</filename>이 손상됨: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "재료"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "프로젝트 파일 <filename>{0}</filename>이(가) 이 버전의 Ultimaker Cura에서 확인할 수 없는 프로파일을 사용하였습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "프로파일"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "추천"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "플러그인"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "사용자 정의"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "무엇을 더 하시겠습니까?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "3MF 파일"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "지금 백업"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "UFP 파일에 쓸 수 없음:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "자동 백업"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 프로파일"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Cura가 시작되는 날마다 자동으로 백업을 생성하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "백업"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "복원"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "백업을 업로드하는 도중 오류가 있었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "백업 삭제"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "백업 생성 중..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "이 백업을 삭제하시겠습니까? 이 작업을 완료할 수 없습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "백업을 생성하는 도중 오류가 있었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "백업 복원"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "백업 업로드 중..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "백업이 복원되기 전에 Cura를 다시 시작해야 합니다. 지금 Cura를 닫으시겠습니까?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "백업이 업로드를 완료했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Cura 설정을 백업, 동기화하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "백업이 최대 파일 크기를 초과했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "로그인"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "백업 관리"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "내 백업"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "백업"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "현재 백업이 없습니다. ‘지금 백업’ 버튼을 사용하여 생성하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "백업 복원 시도 중 오류가 있었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "미리 보기 단계 중에는 보이는 백업 5개로 제한됩니다. 기존 백업을 보려면 백업을 제거하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "예시 데이터 파일을 읽을 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "프린터 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter는 텍스트 모드는 지원하지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (너비)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "후 처리"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G 코드 수정"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (깊이)"
+msgid "Support Blocker"
+msgstr "서포트 차단기"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (높이)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "서포트가 프린팅되지 않는 볼륨을 만듭니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "빌드 플레이트 모양"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "미리 보기"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "중앙이 원점"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "엑스레이 뷰"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "히트 베드"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "레벨 빌드 플레이트"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "히팅 빌드 사이즈"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "업그레이드 선택"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Gcode 유형"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "프린트헤드 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X 최소값"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y 최소값"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X 최대값"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y 최대값"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "갠트리 높이"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "익스트루더의 수"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "익스트루더 오프셋을 GCode에 적용"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "강조 표시된 영역은 누락되거나 관련 없는 표면을 표시합니다. 모델을 수정하고 Cura에서 다시 엽니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "시작 GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "모델 에러"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "End GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "자세히 알아보기"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "노즐 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "솔리드 뷰"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "노즐 크기"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G 코드 파싱"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "호환되는 재료의 직경"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-코드 세부 정보"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "노즐 오프셋 X"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "파일을 보내기 전에 g-코드가 프린터 및 프린터 구성에 적합한 지 확인하십시오. g-코드가 정확하지 않을 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "노즐 오프셋 Y"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G 파일"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "냉각 팬 번호"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "기기 설정"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "익스트루더 시작 Gcode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB 프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "익스트루더 종료 Gcode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "USB를 통해 프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "프린터"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "USB를 통해 프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "펌웨어 업데이트"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "USB를 통해 연결"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "펌웨어는 3D 프린터에서 직접 실행되는 소프트웨어입니다. 이 펌웨어는 스텝 모터를 제어하고 온도를 조절하며 프린터를 작동시킵니다."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USB 인쇄가 진행 중입니다. Cura를 닫으면 인쇄도 중단됩니다. 계속하시겠습니까?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "프린트가 아직 진행 중입니다. Cura는 이전 프린트가 완료될 때까지는 USB를 통해 다른 프린트를 시작할 수 없습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "프린트 진행 중"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "기기로드 중 ..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "환경 설정을 설정하는 중..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "활성 기기 초기화 중..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "패키지 관리자 초기화 중..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "출력 사이즈 초기화 중..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "장면 설정 중..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "인터페이스 로드 중 ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "엔진 초기화 중..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "한 번에 하나의 G-코드 파일만 로드 할 수 있습니다. {0} 가져 오기를 건너 뛰었습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "G-코드가 로드되어 있으면 다른 파일을 열 수 없습니다. {0} 가져 오기를 건너 뛰었습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "새 프린터와 함께 제공되는 펌웨어는 작동하지만 새로운 버전은 더 많은 기능과 향상된 기능을 제공하는 경향이 있습니다."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "펌웨어 자동 업그레이드"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "뛰어난 외관"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "사용자 정의 펌웨어 업로드"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "시각적 프로파일은 높은 시각적 및 표면 품질의 의도를 지니고 시각적 프로토타입과 모델을 인쇄하기 위해 설계되었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "프린터와 연결되지 않아 펌웨어를 업데이트할 수 없습니다."
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "엔지니어링 프로파일은 정확도를 개선하고 허용 오차를 좁히려는 의도로 기능 프로토타입 및 최종 사용 부품을 인쇄하도록 설계되었습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "프린터와 연결이 펌웨어 업그레이드를 지원하지 않아 펌웨어를 업데이트할 수 없습니다."
+msgid "Draft"
+msgstr "초안"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "사용자 정의 펌웨어 선택"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "초안 프로파일은 인쇄 시간을 상당히 줄이려는 의도로 초기 프로토타입과 컨셉트 확인을 인쇄하도록 설계되었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "펌웨어 업데이트"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "재정의되지 않음"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "정말로 {0}을(를) 제거하시겠습니까? 이 작업을 실행 취소할 수 없습니다!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "펌웨어 업데이트 중."
+msgid "Unknown"
+msgstr "알 수 없는"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "펌웨어 업데이트가 완료되었습니다."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "아래 프린터는 그룹에 속해 있기 때문에 연결할 수 없습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "알 수 없는 오류로 인해 펌웨어 업데이트에 실패했습니다."
+msgid "Available networked printers"
+msgstr "사용 가능한 네트워크 프린터"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "계산된"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "프린트를 시작하기 전에 재료 프로파일을 프린터와 동기화하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "새로운 재료가 설치됨"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "통신 오류로 인해 펌웨어 업데이트에 실패했습니다."
+msgid "Custom Material"
+msgstr "사용자 정의 소재"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "입/출력 오류로 인해 펌웨어 업데이트에 실패했습니다."
+msgid "Custom"
+msgstr "사용자 정의"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "펌웨어 누락으로 인해 펌웨어 업데이트에 실패했습니다."
+msgid "Custom profiles"
+msgstr "사용자 정의 프로파일"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "프로젝트 열기"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "지원되는 모든 유형 ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "기존 업데이트"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "모든 파일 (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "새로 만들기"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "프린터와 동기화할 재료의 아카이브 저장에 실패했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "요약 - Cura 프로젝트"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "프린터와 동기화할 재료의 아카이브 로드에 실패했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "프린터 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "Digital Factory의 응답이 손상된 것 같습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "기기의 충돌을 어떻게 해결해야합니까?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "Digital Factory의 응답에 중요한 정보가 누락되었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "유형"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "일부 프린터와 재료를 동기화하기 위한 Digital Factory 연결에 실패했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "프린터 그룹"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Digital Factory 연결에 실패했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "프로파일 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "사용자 데이터 디렉터리에서 압축 파일을 만들 수 없습니다: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "프로파일의 충돌을 어떻게 해결해야합니까?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "적절한 데이터 또는 메타 데이터 없이 Cura 백업을 복원하려고 시도했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "이름"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "현재 버전보다 높은 Cura 백업을 복원하려고 시도했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "다음의 오류는 Cura 백업을 복원하려고 시도하는 동안 발생했습니다:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "프로파일에 없음"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "객체의 새 위치 찾기"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 무시"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "위치 찾기"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivative from"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "모든 개체가 출력할 수 있는 최대 사이즈 내에 위치할 수 없습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 무시"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "위치를 찾을 수 없음"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "재료 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "로그인 실패"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "재료의 충돌은 어떻게 해결되어야합니까?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "외벽"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "표시 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "내벽"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "종류"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "스킨"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "표시 설정 :"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "내부채움"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "1 out of %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "내부채움 서포트"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "프로젝트를 로드하면 빌드 플레이트의 모든 모델이 지워집니다."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "지원하는 인터페이스"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "열기"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "서포트"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "후처리 플러그인"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "스커트"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "후처리 스크립트"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "프라임 타워"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "스크립트 추가"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "움직임 경로"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "리트랙션"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "다른"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "설정"
+msgid "Group #{group_nr}"
+msgstr "그룹 #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "활성 사후 처리 스크립트를 변경하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "릴리즈 노트를 열 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "다음 스크립트들이 활성화됩니다:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "건너뛰기"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "이미지 변환 ..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "닫기"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "\"Base\"에서 각 픽셀까지의 최대 거리."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "추가"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "높이 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "종료"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "밀리미터 단위의 빌드 플레이트에서 기저부 높이."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "취소"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "바닥 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "다음"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "빌드 플레이트의 폭 (밀리미터)."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "\"프린팅 순서\"설정 값으로 인해 갠트리가 프린팅 된 모델과 충돌하지 않도록 출력물 높이가 줄어 들었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "너비 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "출력물 크기"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "빌드 플레이트의 깊이 (밀리미터)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "재료 아카이브를 {}에 저장할 수 없음:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "깊이 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "재료 아카이브를 저장하는 데 실패함"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "리쏘페인(투각)의 경우 들어오는 더 많은 빛을 차단하기 위해서는 다크 픽셀이 더 두꺼운 위치에 해당해야 합니다. 높이 지도의 경우 더 밝은 픽셀이 더 높은 지역을 나타냅니다. 따라서 생성된 3D 모델에서 더 밝은 픽셀이 더 두꺼운 위치에 해당해야 합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "알 수 없는 오류입니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "어두울수록 높음"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "파일이 이미 있습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "밝을수록 높음"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "파일 <filename>{0}</filename>이 이미 있습니다. 덮어 쓰시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "리쏘페인의 경우 반투명성을 위한 간단한 로그 모델을 사용할 수 있습니다. 높이 지도의 경우, 픽셀 값은 높이에 선형적으로 부합합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "유효하지 않은 파일 URL:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "직선 모양"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "지원되지 않음"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "반투명성"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "두께가 1mm인 출력물을 관통하는 빛의 비율 이 값을 낮추면 어두운 부분의 대조가 증가하고 이미지의 밝은 부분의 대조가 감소합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "익스트루더의 현재 가용성과 일치하도록 설정이 변경되었습니다:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1mm의 투과율(%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "설정이 업데이트되었습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "이미지에 적용할 스무딩(smoothing)의 정도."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "익스트루더 비활성화됨"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "스무딩(smoothing)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "프로파일을 <filename>{0}</filename>: <message>{1}</message>로 내보내는데 실패했습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "확인"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "프로파일을 <filename>{0}</filename>로 내보내지 못했습니다. Writer 플러그인이 오류를 보고했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "이 Ultimaker Original에 업그레이드 할 항목을 선택하십시오"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "프로파일을 <filename>{0}</filename> 에 내보냅니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "히팅 빌드 플레이트 (공식 키트 또는 자체 조립식)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "내보내기 완료"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "빌드 플레이트 레벨링"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다 {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "프린팅이 잘 되도록 빌드 플레이트를 조정할 수 있습니다. '다음 위치로 이동'을 클릭하면 노즐이 조정할 수있는 다른 위치로 이동합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "프린터가 추가되기 전 <filename>{0}</filename>에서 프로파일을 가져올 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "모든 자리에; 노즐 아래에 종이 한 장을 넣고 프린팅 빌드 플레이트 높이를 조정하십시오. 빌드플레이드의 높이는 종이의 끝 부분이 노즐의 끝부분으로 살짝 닿을 때의 높이입니다."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "<filename>{0}</filename>(으)로 가져올 사용자 정의 프로파일이 없습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "빌드플레이트 레벨링 시작하기"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "다음 위치로 이동"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "프로파일 <filename>{0}</filename>에는 정확하지 않은 데이터가 포함되어 있으므로, 불러올 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "익명 데이터 수집에 대한 추가 정보"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura는 인쇄 품질과 사용자 경험을 개선하기 위해 익명 데이터를 수집합니다. 공유되는 모든 데이터의 예는 다음과 같습니다:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "프로파일 {0}을(를) 성공적으로 가져왔습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "익명 데이터 전송을 원하지 않습니다"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "파일 {0}에 유효한 프로파일이 포함되어 있지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "익명 데이터 전송 허용"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "프로파일 {0}에 알 수 없는 파일 유형이 있거나 손상되었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "시장"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "사용자 정의 프로파일"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "패키지의 변경 사항이 적용되기 전에 Cura를 다시 시작해야 합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "프로파일에 품질 타입이 누락되었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "%1 종료"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "아직 활성화된 프린터가 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "설치"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "프로파일을 추가할 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "설치됨"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "'{0}' 품질 타입은 현재 활성 기기 정의 '{1}'와(과) 호환되지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "프리미엄"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "경고: 프로파일은 '{0}' 품질 타입을 현재 구성에 이용할 수 없기 때문에 찾을 수 없습니다. 이 품질 타입을 사용할 수 있는 재료/노즐 조합으로 전환하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "웹 마켓플레이스로 이동"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "객체를 증가시키고 배치"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "재료 검색"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "개체 배치 중"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "호환성"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "개체 배치 중"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "기기"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "새 로그인 작업을 시작할 수 없습니다. 다른 로그인 작업이 진행 중인지 확인하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "빌드 플레이트"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Ultimaker 계정 서버에 도달할 수 없음."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "서포트"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "로그인 실패"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "품질"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "응답을 읽을 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "기술 데이터 시트"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "입력한 상태가 올바르지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "안전 데이터 시트"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "계정 서버 인증 시간이 초과되었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "인쇄 가이드라인"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "이 응용 프로그램을 인증할 때 필요한 권한을 제공하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "웹 사이트"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "로그인을 시도할 때 예기치 못한 문제가 발생했습니다. 다시 시도하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "설치 또는 업데이트에 <a href='%1'>로그인</a> 필요"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "큐라를 시작할 수 없습니다"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>재료 스플 구입</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p> <b> 죄송합니다, Ultimaker Cura가 정상적이지 않습니다. </ p> </ b>\n"
+"                     <p> 시작할 때 복구 할 수없는 오류가 발생했습니다. 이 오류는 잘못된 구성 파일로 인해 발생할 수 있습니다. 설정을 백업하고 재설정하는 것이 좋습니다. </ p>\n"
+"                     <p> 백업은 설정 폴더에서 찾을 수 있습니다. </ p>\n"
+"                     <p> 문제를 해결하기 위해이 오류 보고서를 보내주십시오. </ p>\n"
+"                 "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "업데이트"
+msgid "Send crash report to Ultimaker"
+msgstr "충돌 보고서를 Ultimaker에 보내기"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "업데이트 중"
+msgid "Show detailed crash report"
+msgstr "충돌 리포트 보기"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "업데이트됨"
+msgid "Show configuration folder"
+msgstr "설정 폴더 보기"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "뒤로"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "플러그인"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "재료"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "설치됨"
+msgid "Backup and Reset Configuration"
+msgstr "백업 및 리셋 설정"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "다시 시작 시 설치 예정"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "충돌 보고서"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "업데이트에 <a href='%1'>로그인</a> 필요"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>치명적인 오류가 발생했습니다. 문제를 해결할 수 있도록 이 충돌 보고서를 보내주십시오</p></b>\n"
+"            <p>\"보고서 전송\" 버튼을 사용하면 버그 보고서가 서버에 자동으로 전달됩니다</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "다운그레이드"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "시스템 정보"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "설치 제거"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "알 수 없음"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "커뮤니티 기여"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Cura 버전"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "커뮤니티 플러그인"
+msgid "Cura language"
+msgstr "Cura 언어"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "일반 재료"
+msgid "OS language"
+msgstr "OS 언어"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "패키지 가져오는 중..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "플랫폼"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "웹 사이트"
+msgid "Qt version"
+msgstr "Qt 버전"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "이메일"
+msgid "PyQt version"
+msgstr "PyQt 버전"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Ultimaker Cura Enterprise용으로 검증된 플러그인 및 재료를 받으려면 로그인하십시오"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "버전"
+msgid "Not yet initialized<br/>"
+msgstr "아직 초기화되지 않음<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "마지막으로 업데이트한 날짜"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGL 버전: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "상표"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL 공급업체: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "다운로드"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "설치된 플러그인"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "오류 추적"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "설치된 플러그인이 없습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "로그"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "설치된 재료"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "보고서 전송"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "설치된 재료가 없습니다."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"프린터에 연결이 있는지 확인하십시오.⏎- 프린터가 켜져 있는지 확인하십시오.\n"
+"- 프린터가 네트워크에 연결되어 있는지 확인하십시오.⏎- 클라우드로 연결된 프린터를 탐색할 수 있도록 로그인되어 있는지 확인하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "번들 플러그인"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "프린터를 네트워크에 연결하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "번들 재료"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "사용자 매뉴얼 온라인 보기"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Cura 패키지 데이터베이스에 연결할 수 없습니다. 연결을 확인하십시오."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Cura에서 프린트를 모니터링하려면 프린터를 연결하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "패키지를 설치하려면 라이선스를 수락해야 합니다"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "이 모델에 맞게 사용자 정의 설정을 선택하십시오"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "계정의 변경 사항"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "필터..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "취소"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "모두 보이기"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "다음 것"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "메쉬 유형"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "다음 패키지가 추가됩니다:"
+msgid "Normal model"
+msgstr "일반 모델"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "호환되지 않는 Cura 버전이기 때문에 다음 패키지를 설치할 수 없습니다:"
+msgid "Print as support"
+msgstr "서포터로 프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "제거 확인"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "오버랩 설정 수정"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "아직 사용 중인 재료 및/또는 프로파일을 제거합니다. 확인하면 다음 재료/프로파일이 기본값으로 재설정됩니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "오버랩 지원 안함"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "재료"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "매쉬 내부채움 전용"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "프로파일"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "커팅 메쉬"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "확인"
+msgid "Select settings"
+msgstr "설정 선택"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "펌웨어 업데이트"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "색 구성표"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "펌웨어는 3D 프린터에서 직접 실행되는 소프트웨어입니다. 이 펌웨어는 스텝 모터를 제어하고 온도를 조절하며 프린터를 작동시킵니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "재료 색상"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "새 프린터와 함께 제공되는 펌웨어는 작동하지만 새로운 버전은 더 많은 기능과 향상된 기능을 제공하는 경향이 있습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "라인 유형"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "펌웨어 자동 업그레이드"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "속도"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "사용자 정의 펌웨어 업로드"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "레이어 두께"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "프린터와 연결되지 않아 펌웨어를 업데이트할 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "선 두께"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "프린터와 연결이 펌웨어 업그레이드를 지원하지 않아 펌웨어를 업데이트할 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "유량"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "사용자 정의 펌웨어 선택"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "호환 모드"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "펌웨어 업데이트"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "이동"
+msgid "Updating firmware."
+msgstr "펌웨어 업데이트 중."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "도움말"
+msgid "Firmware update completed."
+msgstr "펌웨어 업데이트가 완료되었습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "외곽"
+msgid "Firmware update failed due to an unknown error."
+msgstr "알 수 없는 오류로 인해 펌웨어 업데이트에 실패했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "내부채움"
+msgid "Firmware update failed due to an communication error."
+msgstr "통신 오류로 인해 펌웨어 업데이트에 실패했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "시작"
+msgid "Firmware update failed due to an input/output error."
+msgstr "입/출력 오류로 인해 펌웨어 업데이트에 실패했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "상단 레이어 만 표시"
+msgid "Firmware update failed due to missing firmware."
+msgstr "펌웨어 누락으로 인해 펌웨어 업데이트에 실패했습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "상단에 5 개의 세부 레이어 표시"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "중단됨"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "위 / 아래"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "끝마친"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "내벽"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "준비 중..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "최소"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "중지 중..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "최대"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "실패"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "일시 정지 중..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "일시 중지됨"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "다시 시작..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "조치가 필요함"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "%2에서 %1 완료"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "프린터 관리"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "유리"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "대기열을 원격으로 관리하려면 프린터 펌웨어를 업데이트하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "클라우드 프린터용 Webcam 피드는 Ultimaker Cura에서 볼 수 없습니다. '프린터 관리'를 클릭하여 Ultimaker Digital Factory를 방문하고 이 웹캠을 확인하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "로딩 중..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "사용불가"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "연결할 수 없음"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "대기 상태"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "준비 중..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "제목 없음"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "익명"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "구성 변경 필요"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "세부 사항"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "사용할 수 없는 프린터"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "첫 번째로 사용 가능"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "대기 중"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "브라우저에서 관리"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "대기열에 프린팅 작업이 없습니다. 작업을 추가하려면 슬라이스하여 전송하십시오."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "인쇄 작업"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "총 인쇄 시간"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "대기"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "네트워크를 통해 프린팅"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "프린트"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "프린터 선택"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "구성 변경"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "무시하기"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "할당된 프린터 %1의 구성을 다음과 같이 변경해야 합니다:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "프린터 %1이(가) 할당되었으나 작업에 알 수 없는 재료 구성이 포함되어 있습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "재료 %1을(를) %2에서 %3(으)로 변경합니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "%3을(를) 재료 %1(으)로 로드합니다(이 작업은 무효화할 수 없음)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "PrintCore %1을(를) %2에서 %3(으)로 변경합니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "빌드 플레이트를 %1(으)로 변경합니다(이 작업은 무효화할 수 없음)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "무시하기는 기존 프린터 구성과 함께 지정된 설정을 사용하게 됩니다. 이는 인쇄 실패로 이어질 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "알루미늄"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "끝마친"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "중지 중..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "중단됨"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "실패"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "일시 정지 중..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "일시 중지됨"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "다시 시작..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "네트워크를 통해 프린팅"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "조치가 필요함"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "프린트"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "%2에서 %1 완료"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "프린터 선택"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "네트워크 프린터에 연결"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "네트워크를 통해 프린터로 직접 프린팅하려면 네트워크 케이블을 사용하거나 프린터를 WIFI 네트워크에 연결하여 프린터가 네트워크에 연결되어 있는지 확인하십시오. Cura를 프린터에 연결하지 않은 경우에도 USB 드라이브를 사용하여 g-코드 파일을 프린터로 전송할 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "아래 목록에서 프린터를 선택하십시오:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "편집"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "제거"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "새로고침"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "프린터가 목록에 없으면 네트워크 프린팅 문제 해결 가이드를 읽어보십시오"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "유형"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "펌웨어 버전"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "주소"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "이 프린터는 프린터 그룹을 호스트하도록 설정되어 있지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "이 프린터는 %1개 프린터 그룹의 호스트입니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "이 주소의 프린터가 아직 응답하지 않았습니다."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "연결"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "잘못된 IP 주소"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "유효한 IP 주소를 입력하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "프린터 주소"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "네트워크에 있는 프린터의 IP 주소를 입력하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "사용할 수 없는 프린터"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "첫 번째로 사용 가능"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "맨 위로 이동"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "삭제"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "재개"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "일시 정지 중..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "다시 시작..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "중지"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "중지 중..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "중단"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "%1(을)를 대기열의 맨 위로 이동하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "인쇄 작업을 맨 위로 이동"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "%1(을)를 삭제하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "인쇄 작업 삭제"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "%1(을)를 정말로 중지하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "프린팅 중단"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "대기 중"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "브라우저에서 관리"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "대기열에 프린팅 작업이 없습니다. 작업을 추가하려면 슬라이스하여 전송하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "인쇄 작업"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "총 인쇄 시간"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "대기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "색 구성표"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "재료 색상"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "라인 유형"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "속도"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "레이어 두께"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "선 두께"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "유량"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "호환 모드"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "이동"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "도움말"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "외곽"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "내부채움"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "시작"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "상단 레이어 만 표시"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "상단에 5 개의 세부 레이어 표시"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "위 / 아래"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "내벽"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "최소"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "최대"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"프린터에 연결이 있는지 확인하십시오.⏎- 프린터가 켜져 있는지 확인하십시오.\n"
-"- 프린터가 네트워크에 연결되어 있는지 확인하십시오.⏎- 클라우드로 연결된 프린터를 탐색할 수 있도록 로그인되어 있는지 확인하십시오."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "프린터를 네트워크에 연결하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "높이 (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "사용자 매뉴얼 온라인 보기"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "\"Base\"에서 각 픽셀까지의 최대 거리."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Cura에서 프린트를 모니터링하려면 프린터를 연결하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "바닥 (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "이 출력물에는 문제가있을 수 있습니다. 조정을 위한 도움말을 보려면 클릭하십시오."
+msgid "The base height from the build plate in millimeters."
+msgstr "밀리미터 단위의 빌드 플레이트에서 기저부 높이."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "너비 (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D 보기"
+msgid "The width in millimeters on the build plate"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "깊이 (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "앞에서 보기"
+msgid "The depth in millimeters on the build plate"
+msgstr "빌드 플레이트의 깊이 (밀리미터)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "어두울수록 높음"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "밝을수록 높음"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "위에서 보기"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "리쏘페인(투각)의 경우 들어오는 더 많은 빛을 차단하기 위해서는 다크 픽셀이 더 두꺼운 위치에 해당해야 합니다. 높이 지도의 경우 더 밝은 픽셀이 더 높은 지역을 나타냅니다. 따라서 생성된 3D 모델에서 더 밝은 픽셀이 더 두꺼운 위치에 해당해야 합니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "직선 모양"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "반투명성"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "왼쪽 보기"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "리쏘페인의 경우 반투명성을 위한 간단한 로그 모델을 사용할 수 있습니다. 높이 지도의 경우, 픽셀 값은 높이에 선형적으로 부합합니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1mm의 투과율(%)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "오른쪽 보기"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "두께가 1mm인 출력물을 관통하는 빛의 비율 이 값을 낮추면 어두운 부분의 대조가 증가하고 이미지의 밝은 부분의 대조가 감소합니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "개체 목록"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "스무딩(smoothing)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "이미지에 적용할 스무딩(smoothing)의 정도."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "시장"
+msgid "OK"
+msgstr "확인"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "파일"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "프로젝트 열기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "편집(&E)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "기존 업데이트"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "보기(&V)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "새로 만들기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "설정"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "요약 - Cura 프로젝트"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "확장 프로그램(&X)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "기기의 충돌을 어떻게 해결해야합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "환경설정(&R)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "프린터 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "도움말(&H)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "유형"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "새 프로젝트"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "프린터 그룹"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "새 프로젝트를 시작 하시겠습니까? 빌드 플레이트 및 저장하지 않은 설정이 지워집니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "프로파일의 충돌을 어떻게 해결해야합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "슬라이싱..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "프로파일 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "슬라이스 할 수 없습니다"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "이름"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "프로파일에 없음"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 무시"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivative from"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 무시"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "재료의 충돌은 어떻게 해결되어야합니까?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "재료 설정"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "표시 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "종류"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "표시 설정 :"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "1 out of %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "프로젝트를 로드하면 빌드 플레이트의 모든 모델이 지워집니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "열기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "처리"
+msgid "Want more?"
+msgstr "무엇을 더 하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "슬라이스"
+msgid "Backup Now"
+msgstr "지금 백업"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "슬라이싱 프로세스 시작"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "자동 백업"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "취소"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Cura가 시작되는 날마다 자동으로 백업을 생성하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "시간 추산"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura 버전"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "재료 추산"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "기기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "재료"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "프로파일"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "시간 추산 이용 불가"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "플러그인"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "비용 추산 이용 불가"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "복원"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "백업 삭제"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "이 백업을 삭제하시겠습니까? 이 작업을 완료할 수 없습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "백업 복원"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "백업이 복원되기 전에 Cura를 다시 시작해야 합니다. 지금 Cura를 닫으시겠습니까?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Cura 설정을 백업, 동기화하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "미리 보기"
+msgid "Sign in"
+msgstr "로그인"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "프린터 추가"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "내 백업"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "현재 백업이 없습니다. ‘지금 백업’ 버튼을 사용하여 생성하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "미리 보기 단계 중에는 보이는 백업 5개로 제한됩니다. 기존 백업을 보려면 백업을 제거하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura 백업"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "익명 데이터 수집에 대한 추가 정보"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura는 인쇄 품질과 사용자 경험을 개선하기 위해 익명 데이터를 수집합니다. 공유되는 모든 데이터의 예는 다음과 같습니다:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "익명 데이터 전송을 원하지 않습니다"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "익명 데이터 전송 허용"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "후처리 플러그인"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "네트워크 프린터 추가"
+msgid "Post Processing Scripts"
+msgstr "후처리 스크립트"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "스크립트 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "비 네트워크 프린터 추가"
+msgid "Settings"
+msgstr "설정"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "활성 사후 처리 스크립트를 변경하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "다음 스크립트들이 활성화됩니다:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "클라우드 프린터 추가"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "이 Ultimaker Original에 업그레이드 할 항목을 선택하십시오"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "클라우드 응답 대기"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "히팅 빌드 플레이트 (공식 키트 또는 자체 조립식)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "빌드 플레이트 레벨링"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "사용자의 계정에 프린터가 없습니까?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "프린팅이 잘 되도록 빌드 플레이트를 조정할 수 있습니다. '다음 위치로 이동'을 클릭하면 노즐이 조정할 수있는 다른 위치로 이동합니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "사용자의 계정에 있는 다음 프린터를 Cura에 추가하였습니다:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "모든 자리에; 노즐 아래에 종이 한 장을 넣고 프린팅 빌드 플레이트 높이를 조정하십시오. 빌드플레이드의 높이는 종이의 끝 부분이 노즐의 끝부분으로 살짝 닿을 때의 높이입니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "빌드플레이트 레벨링 시작하기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "다음 위치로 이동"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "수동으로 프린터 추가"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "IP 주소로 프린터 추가"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "프린터의 IP 주소를 입력하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "추가"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "장치에 연결할 수 없습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "%1 종료"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Ultimaker 프린터로 연결할 수 없습니까?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "이 주소의 프린터가 아직 응답하지 않았습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "알 수 없는 프린터이거나 그룹의 호스트가 아니기 때문에 이 프린터를 추가할 수 없습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "뒤로"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "연결"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "사용자 계약"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "거절 및 닫기"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Ultimaker Cura에 오신 것을 환영합니다"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
-msgstr "Ultimaker Cura를 설정하려면 다음 단계로 이동하세요. 오래 걸리지 않습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "시작하기"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Ultimaker 플랫폼에 로그인"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "재료 설정 및 Marketplace 플러그인 추가"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "재료 설정과 플러그인 백업 및 동기화"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Ultimaker 커뮤니티에서 48,000명 이상의 사용자와 아이디어를 공유하고 도움 받기"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "건너뛰기"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "거절"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Ultimaker 계정 무료 생성"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "프린터"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "노즐 설정"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "제조업체"
+msgid "Nozzle size"
+msgstr "노즐 크기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "프로파일 원작자"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "프린터 이름"
+msgid "Compatible material diameter"
+msgstr "호환되는 재료의 직경"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "프린터의 이름을 설정하십시오"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "노즐 오프셋 X"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "네트워크에서 검색된 프린터가 없습니다."
+msgid "Nozzle offset Y"
+msgstr "노즐 오프셋 Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "새로고침"
+msgid "Cooling Fan Number"
+msgstr "냉각 팬 번호"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "익스트루더 시작 Gcode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "익스트루더 종료 Gcode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "프린터 설정"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "IP로 프린터 추가"
+msgid "X (Width)"
+msgstr "X (너비)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "클라우드 프린터 추가"
+msgid "Y (Depth)"
+msgstr "Y (깊이)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "문제 해결"
+msgid "Z (Height)"
+msgstr "Z (높이)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ultimaker Cura를 개선하는 데 도움을 주십시오"
+msgid "Build plate shape"
+msgstr "빌드 플레이트 모양"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura는 인쇄 품질과 사용자 경험을 개선하기 위해 다음과 같은 익명 데이터를 수집합니다:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "중앙이 원점"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "기기 유형"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "히트 베드"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "재료 사용"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "히팅 빌드 사이즈"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "슬라이드 수"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Gcode 유형"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "인쇄 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "프린트헤드 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura가 수집하는 데이터에는 개인 정보가 포함되어 있지 않습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X 최소값"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "추가 정보"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y 최소값"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "새로운 기능"
+msgid "X max"
+msgstr "X 최대값"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "비어 있음"
+msgid "Y max"
+msgstr "Y 최대값"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "릴리즈 노트"
+msgid "Gantry Height"
+msgstr "갠트리 높이"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "익스트루더의 수"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "익스트루더 오프셋을 GCode에 적용"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "시작 GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "End GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "내 프린터"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Ultimaker Digital Factory의 프린터를 모니터링하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Digital Library에서 프린트 프로젝트를 생성하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "인쇄 작업"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "프린트 작업을 모니터링하고 프린트 기록에서 다시 프린트하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "플러그인 및 재료 프로파일을 사용하여 Ultimaker Cura를 확장하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Ultimaker e-러닝을 통해 3D 프린팅 전문가로 거듭나십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Ultimaker support"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Ultimaker Cura로 시작하는 방법을 알아보십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "질문하기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Ultimaker 커뮤니티에 문의하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "버그 리포트"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "개발자에게 문제를 알려주십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Ultimaker 웹 사이트를 방문하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "선택한 모델을 %1로 프린팅하십시오"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "설정"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "새 프로젝트"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "새 프로젝트를 시작 하시겠습니까? 빌드 플레이트 및 저장하지 않은 설정이 지워집니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "시장"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "빌드 플레이트"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "가열 된 베드의 설정 온도. 베드가 이 온도로 가열되거나 식을 것입니다. 이 값이 0이면 베드 가열이 꺼집니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "가열 된 베드의 현재 온도."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "베드를 예열하기 위한 온도."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "취소"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "예열"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "프린팅하기 전에 베드를 미리 가열하십시오. 가열되는 동안 계속해서 프린팅물을 조정할 수 있으며, 프린팅 준비가 되면 베드가 가열 될 때까지 기다릴 필요가 없습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "프린터가 연결되어 있지 않습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "프린터 제어"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "조그 위치"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "조그 거리"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Gcode 보내기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "연결된 프린터에 사용자 정의 G 코드 명령을 보냅니다. ‘Enter’키를 눌러 명령을 전송하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "익스트루더"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "핫 엔드의 설정 온도입니다. 핫 엔드는 이 온도를 향해 가열되거나 냉각됩니다. 이 값이 0이면 온열 가열이 꺼집니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "이 익스트루더의 현재 온도."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "노즐을 예열하기 위한 온도."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "프린팅하기 전에 노즐을 미리 가열하십시오. 가열되는 동안 계속해서 프린팅물을 조정할 수 있으며, 프린팅 준비가 되면 노즐이 가열 될 때까지 기다릴 필요가 없습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "이 익스트루더의 재료 색."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "이 익스트루더의 재료."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "이 익스트루더에 삽입 된 노즐."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "프로젝트 파일 열기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "이 파일은 Cura 프로젝트 파일입니다. 프로젝트로 열거나 모델을 가져 오시겠습니까?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "선택 기억하기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "프로젝트로 열기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "모델 가져 오기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "프로젝트 저장"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "%1익스트루더"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & 재료"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "재료"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "프로젝트 요약을 다시 저장하지 마십시오"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "저장"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "파일 열기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "선택한 파일 내에 하나 이상의 프로젝트 파일이 있습니다. 한 번에 하나의 프로젝트 파일 만 열 수 있습니다. 해당 파일에서 모델 만 가져 오기를 권장합니다. 계속 하시겠습니까?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "모두 모델로 가져 오기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "%1 정보"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "버전: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "3D 프린팅을 위한 엔드 투 엔트 솔루션."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3602,2194 +3583,2378 @@ msgstr ""
 "Cura는 커뮤니티와 공동으로 Ultimaker B.V.에 의해 개발되었습니다.\n"
 "Cura는 다음의 오픈 소스 프로젝트를 사용합니다:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "그래픽 사용자 인터페이스"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "애플리케이션 프레임 워크"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "GCode 생성기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "프로세스간 통신 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "프로그래밍 언어"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI 프레임 워크"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI 프레임 워크 바인딩"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C ++ 바인딩 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "데이터 교환 형식"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "과학 컴퓨팅을 위한 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "더 빠른 수학연산을 위한 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "STL 파일 처리를 위한 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "평면 개체 처리를 위한 지원 라이브러리"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "삼각형 메쉬 처리를 위한 지원 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "3MF 파일 처리를 위한 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "파일 메타데이터 및 스트리밍을 위한 지원 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "직렬 통신 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf discovery 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "다각형 클리핑 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Python용 정적 유형 검사기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "SSL 신뢰성 검증용 루트 인증서"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python 오류 추적 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "폴리곤 패킹 라이브러리, Prusa Research 개발"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "libnest2d용 Python 바인딩"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "시스템 키링 액세스를 위한 서포트 라이브러리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Microsoft Windows용 Python 확장"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "폰트"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG 아이콘"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux 교차 배포 응용 프로그램 배포"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "파일 열기"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "선택한 파일 내에 하나 이상의 프로젝트 파일이 있습니다. 한 번에 하나의 프로젝트 파일 만 열 수 있습니다. 해당 파일에서 모델 만 가져 오기를 권장합니다. 계속 하시겠습니까?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "모두 모델로 가져 오기"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "프로젝트 저장"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "%1익스트루더"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & 재료"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "재료"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "프로젝트 요약을 다시 저장하지 마십시오"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "저장"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "변경 사항 삭제 또는 유지"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"일부 프로파일 설정을 사용자 정의했습니다.\n"
-"프로파일 전환 후에도 변경된 설정을 유지하시겠습니까?\n"
-"또는 변경 사항을 버리고 '%1'에서 기본값을 로드할 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "프로파일 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "현재 변경 사항"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "항상 묻기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "최소하고 다시 묻지않기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "계속하고 다시 묻지않기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "변경 사항 삭제"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "변경 사항 유지"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "프로젝트 파일 열기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "선택할 항목 없음"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "이 파일은 Cura 프로젝트 파일입니다. 프로젝트로 열거나 모델을 가져 오시겠습니까?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "파일 여는 중..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "선택 기억하기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "최근 열어본 파일 열기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "프로젝트로 열기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "표시 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "모델 가져 오기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "모든 카테고리 붕괴"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "보기 설정 관리..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "재료(&M)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "활성 익스트루더로 설정"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "익스트루더 사용"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "익스트루더 사용하지 않음"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "재료"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "즐겨찾기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "일반"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "도움말(&H)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "파일"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "프로젝트 저장(&S)..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "내보내기(&E)..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "내보내기 선택..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "환경설정(&R)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "편집(&E)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "프린터(&P)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "네트워크 프린터"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "로컬 프린터"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "확장 프로그램(&X)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "구성"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "활성화된 프린트"
+msgid "Loading available configurations from the printer..."
+msgstr "프린터에서 사용 가능한 구성 로딩 중..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "작업 이름"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "프린터가 연결되어 있지 않기 때문에 구성을 사용할 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "프린팅 시간"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "%1이(가) 인식되지 않기 때문에 이 구성을 사용할 수 없습니다. %2에 방문하여 올바른 재료 프로파일을 다운로드하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "예상 남은 시간"
+msgid "Marketplace"
+msgstr "시장"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "클라우드 프린터가 오프라인 상태입니다. 프린터가 켜져 있고 인터넷과 연결되어 있는지 확인하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "이 익스트루더의 구성이 허용되지 않았으며, 슬라이싱이 금지됩니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "해당 프린터가 사용자의 계정에 연결되어 있지 않습니다. Ultimaker Digital Factory에 방문하여 연결을 설정하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "이 익스트루더 구성에 일치하는 프로파일이 없습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "현재 클라우드 연결을 사용할 수 없습니다. 클라우드 프린터에 연결하려면 로그인하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "구성 선택"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "현재 클라우드 연결을 사용할 수 없습니다. 사용자의 인터넷 연결을 확인하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "구성"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "프린터 추가"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "사용자 정의"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "프린터 관리"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "프린터"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "연결된 프린터"
+msgid "Enabled"
+msgstr "실행됨"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "프린터 사전 설정"
+msgid "Material"
+msgstr "재료"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "프린팅 설정"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "더 나은 접착력을 위해 이 재료 조합과 함께 접착제를 사용하십시오.."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "인쇄 설정 비활성화됨. G 코드 파일을 수정할 수 없습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "선택된 모델 프린팅 :"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "선택한 모델 복"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "프로파일"
+msgid "Number of Copies"
+msgstr "복제할 수"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "프로젝트 저장 중..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "보기(&V)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "카메라 위치(&C)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "카메라 뷰"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "원근"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "직교"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "유형 보기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Ultimaker 플랫폼에 로그인"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"일부 설정/대체 값은 프로파일에 저장된 값과 다릅니다.\n"
-"\n"
-"프로파일 매니저를 열려면 클릭하십시오."
+"- 재료 설정 및 Marketplace 플러그인 추가\n"
+"- 재료 설정과 플러그인 백업 및 동기화\n"
+"- Ultimaker 커뮤니티에서 48,000명 이상의 사용자와 아이디어를 공유하고 도움 받기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "사용자 정의 프로파일"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Ultimaker 계정 무료 생성"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "현재 변경 사항 삭제"
+msgid "Sign in"
+msgstr "로그인"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "마지막 업데이트: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "추천"
+msgid "Ultimaker Account"
+msgstr "Ultimaker 계정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "사용자 정의"
+msgid "Sign Out"
+msgstr "로그아웃"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "확인 중..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "계정 동기화됨"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "오류가 발생하였습니다..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "보류된 업데이트 설치"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "계정 업데이트 확인"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "슬라이싱..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "슬라이스 할 수 없습니다"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "처리"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "슬라이스"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "슬라이싱 프로세스 시작"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "취소"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "시간 추산"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "재료 추산"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "시간 추산 이용 불가"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "비용 추산 이용 불가"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "미리 보기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "다시 시작한 후에 이 패키지가 설치됩니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "일반"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "설정"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "프린터"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "재료"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "프로파일"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1 닫기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "%1을(를) 정말로 종료하시겠습니까?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "패키지 설치"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "파일 열기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "선택한 파일 내에 하나 이상의 G-코드 파일이 있습니다. 한 번에 하나의 G-코드 파일 만 열 수 있습니다. G-코드 파일을 열려면 하나만 선택하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "프린터 추가"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "새로운 기능"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "유효한"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "비활성"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "실험적 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "프린팅 설정"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "인쇄 설정 비활성화됨. G 코드 파일을 수정할 수 없습니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "추천"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "사용자 정의"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "압출기 %2의 구성에 대한 %1 프로파일이 없습니다. 대신 기본 의도가 사용됩니다"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "프로파일"
+msgid "Gradual infill"
+msgstr "점진적 내부채움"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "일부 프로파일 설정을 수정했습니다. 이러한 설정을 변경하려면 사용자 지정 모드로 이동하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "점차적인 내부채움은 점차적으로 빈 공간 채우기의 양을 증가시킵니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "서포트"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "오버행이 있는 모델 서포트를 생성합니다. 이러한 구조가 없으면 이러한 부분이 프린팅 중에 붕괴됩니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "점진적 내부채움"
+msgid "Profiles"
+msgstr "프로파일"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "점차적인 내부채움은 점차적으로 빈 공간 채우기의 양을 증가시킵니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "일부 프로파일 설정을 수정했습니다. 이러한 설정을 변경하려면 사용자 지정 모드로 이동하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "부착"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "브림이나 라프트를 사용합니다. 이렇게하면 출력물 주변이나 아래에 평평한 영역이 추가되어 나중에 쉽게 자를 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "프로젝트 저장 중..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "사용자 정의 프로파일"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "네트워크 프린터"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "현재 변경 사항 삭제"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "로컬 프린터"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "프로파일"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "재료"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"일부 설정/대체 값은 프로파일에 저장된 값과 다릅니다.\n"
+"\n"
+"프로파일 매니저를 열려면 클릭하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "즐겨찾기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "일반"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "프로파일"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "선택된 모델 프린팅 :"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "현재 설정"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "선택한 모델 복"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "복제할 수"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "프로젝트 저장(&S)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "내보내기(&E)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "내보내기 선택..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "보기 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "구성"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "사용자 정의"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "모두 확인"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "활성화"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "이름 바꾸기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "직경 변경 확인"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "새 필라멘트의 직경은 %1 mm로 설정되었으며, 현재 압출기와 호환되지 않습니다. 계속하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "프린터"
+msgid "Display Name"
+msgstr "표시 이름"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "실행됨"
+msgid "Brand"
+msgstr "상표"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "재료"
+msgid "Material Type"
+msgstr "재료 유형"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "더 나은 접착력을 위해 이 재료 조합과 함께 접착제를 사용하십시오.."
+msgid "Color"
+msgstr "색깔"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "이 익스트루더의 구성이 허용되지 않았으며, 슬라이싱이 금지됩니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "이 익스트루더 구성에 일치하는 프로파일이 없습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "속성"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "구성 선택"
+msgid "Density"
+msgstr "밀도"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "구성"
+msgid "Diameter"
+msgstr "직경"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "프린터에서 사용 가능한 구성 로딩 중..."
+msgid "Filament Cost"
+msgstr "필라멘트 비용"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "프린터가 연결되어 있지 않기 때문에 구성을 사용할 수 없습니다."
+msgid "Filament weight"
+msgstr "필라멘트 무게"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "%1이(가) 인식되지 않기 때문에 이 구성을 사용할 수 없습니다. %2에 방문하여 올바른 재료 프로파일을 다운로드하십시오."
+msgid "Filament length"
+msgstr "필라멘트 길이"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "시장"
+msgid "Cost per Meter"
+msgstr "미터 당 비용"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "파일 여는 중..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "이 재료는 %1에 연결되어 있으며 일부 속성을 공유합니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "프린터(&P)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "재료 연결 해제"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "재료(&M)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "설명"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "활성 익스트루더로 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "접착 정보"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "익스트루더 사용"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "정보"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "익스트루더 사용하지 않음"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "재료를 프린터와 동기화"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "최근 열어본 파일 열기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "재료를 프린터와 동기화"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "표시 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "몇 가지 간단한 단계를 수행하면 모든 재료 프로파일과 프린터를 동기화할 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "모든 카테고리 붕괴"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "재료 프로파일을 동기화해야 하는 이유는 무엇입니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "보기 설정 관리..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "시작"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "카메라 위치(&C)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "로그인"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "카메라 뷰"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Digital Factory에 연결된 모든 프린터와 자동으로 재료 프로파일을 동기화하려면 Cura에 가입되어 있어야 합니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "원근"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "재료를 USB로 동기화"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "직교"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "다음 프린터는 새 재료 프로파일을 받게 됩니다:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "빌드 플레이트(&B)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "재료를 프린터로 전송할 때 어떤 문제가 발생했습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "유형 보기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "다음 프린터에 재료 프로파일이 성공적으로 동기화되었습니다:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "지원으로 프린팅됩니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "문제 해결"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "이 모델과 중복되는 다른 모델은 수정됩니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "프린터가 없습니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "이 모델과 중복되는 내부채움은 수정됩니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "모든 프린터가 켜져 있고 Digital Factory에 연결되어 있는지 확인하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "이 모델과의 중복은 지원되지 않습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "목록 새로고침"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "%1 설정을 덮어씁니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "다시 시도"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "프로파일"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "완료"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "활성화"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "동기화"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "생성"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "동기화 중"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "프린터를 찾을 수 없음"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Digital Factory에 호환되는 프린터가 연결되지 않은 것 같습니다. 프린터가 연결되어 있고 최신 펌웨어가 설치되어 있는지 확인하십시오."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Digital Factory에 프린터를 연결하는 방법 알아보기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "새로고침"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "재료 프로파일을 USB로 동기화"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "새로운 재료 프로파일을 프린터로 로드하기 위해 다음 단계를 수행합니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "재료 아카이브 내보내기 버튼을 클릭합니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr ".umm 파일을 USB 스틱에 저장합니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "USB 스틱을 프린터에 삽입하고 새로운 재료 프로파일 로드 절차를 진행합니다."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "새로운 재료 프로파일을 내 프린터로 로드하는 방법"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "뒤로"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "재료 아카이브 내보내기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "모든 재료 내보내기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "복제"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "이름 바꾸기"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "가져오기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "내보내기"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "프로파일 생성하기"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "이 프로파일에 대한 이름을 제공하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "복제"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "프로파일 복제하기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "내보내기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "제거 확인"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "%1을 제거 하시겠습니까? 이것은 취소 할 수 없습니다!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "프로파일 이름 바꾸기"
+msgid "Import Material"
+msgstr "재료 가져 오기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "프로파일 가져 오기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "재료를 성공적으로 가져왔습니다"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "재료를 가져올 수 없습니다"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "프로파일 내보내기"
+msgid "Export Material"
+msgstr "재료 내보내기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "재료를 내보내는데 실패했습니다"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "재료를 성공적으로 내보냈습니다"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "프린터: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "현재 설정 / 재정의 프로파일 업데이트"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "이 프로파일은 프린터에서 지정한 기본값을 사용하므로 아래 목록에 아무런 설정/재정의가 없습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "현재 설정이 선택한 프로파일과 일치합니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "전역 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "일반"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "프로파일 생성하기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "이 프로파일에 대한 이름을 제공하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "프로파일 내보내기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "프로파일 복제하기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "프로파일 이름 바꾸기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "프로파일 가져 오기"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "인터페이스"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "통화:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "테마:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "이러한 변경 사항을 적용하려면 응용 프로그램을 다시 시작해야합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "설정이 변경되면 자동으로 슬라이싱 합니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "자동으로 슬라이싱"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "뷰포트 동작"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "지원되지 않는 모델 영역을 빨간색으로 강조 표시하십시오. 서포트가 없으면 이 영역이 제대로 프린팅되지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "오버행 표시"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "경고 기호를 사용해 모델에서 누락되거나 관계 없는 표면을 강조 표시합니다. 도구 경로에서는 종종 의도한 형상의 일부가 누락됩니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "모델 오류 표시"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "모델을 선택하면 모델이 뷰의 가운데에 오도록 카메라를 이동합니다"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "항목을 선택하면 카메라를 중앙에 위치"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "큐라의 기본 확대 동작을 반전시켜야 합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "카메라 줌의 방향을 반전시키기."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "확대가 마우스 방향으로 이동해야 합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "정투영법 시점에서는 마우스 방향으로 확대가 지원되지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "마우스 방향으로 확대"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "모델을 더 이상 교차시키지 않도록 이동해야합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "모델이 분리되어 있는지 확인"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "모델을 빌드 플레이트에 닿도록 아래로 움직여야합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "모델을 빌드 플레이트에 자동으로 놓기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "g-code 리더에 주의 메시지를 표시하기."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "g-code 리더의 주의 메시지"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "레이어가 호환 모드로 강제 설정되어야합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "레이어 뷰 호환성 모드로 전환 (다시 시작해야 함)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "닫힌 위치에서 Cura를 열어야 합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "시작 시 창 위치 복원"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "어떤 유형의 카메라 렌더링을 사용해야 합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "카메라 렌더링:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "원근"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "정투영"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "파일 열기 및 저장"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "데스크톱 또는 외부 애플리케이션의 파일을 동일한 Cura 인스턴스에서 엽니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Cura의 단일 인스턴스 사용"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "Cura의 단일 인스턴스에서 새 모델을 로드하기 전에 빌드 플레이트를 지워야 합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "모델을 단일 인스턴스로 로드하기 전에 빌드 플레이트 지우기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "크기가 너무 큰 경우 모델을 빌드 볼륨에 맞게 조정해야합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "큰 모델의 사이즈 수정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "단위가 밀리미터가 아닌 미터 단위 인 경우 모델이 매우 작게 나타날 수 있습니다. 이 모델을 확대할까요?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "매우 작은 모델의 크기 조정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "모델을 로드한 후에 선택해야 합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "로드된 경우 모델 선택"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "프린터 이름에 기반한 접두어가 프린팅 작업 이름에 자동으로 추가되어야합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "작업 이름에 기기 접두어 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "프로젝트 파일을 저장할 때 요약이 표시되어야합니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "프로젝트 저장시 요약 대화 상자 표시"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "프로젝트 파일을 열 때 기본 동작"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "프로젝트 파일을 열 때 기본 동작 "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "항상 묻기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "항상 프로젝트로 열기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "항상 모델 가져 오기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "프로파일을 변경하고 다른 프로파일로 전환하면 수정 사항을 유지할지 여부를 묻는 대화 상자가 표시됩니다. 기본 행동을 선택하면 해당 대화 상자를 다시 표시 하지 않을 수 있습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "다른 프로파일로 변경하는 경우 변경된 설정값에 대한 기본 동작 "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "항상 변경된 설정 삭제"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "항상 변경된 설정을 새 프로파일로 전송"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "보안"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "프린터에 대한 익명의 데이터를 Ultimaker로 보낼까요? 모델, IP 주소 또는 기타 개인 식별 정보는 전송되거나 저장되지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(익명) 프린터 정보 보내기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "추가 정보"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "업데이트"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura가 프로그램이 시작될 때 업데이트를 확인할까요?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "시작시 업데이트 확인"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "업데이트 사항을 확인할 때 안정적인 릴리즈만 확인하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "안정적인 릴리즈만 해당"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "업데이트 사항을 확인할 때 안정적인 베타 릴리즈를 확인하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "안정적인 베타 릴리즈"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Cura가 시작될 때마다 새로운 플러그인을 자동 확인해야 합니까? 사용 안 함으로 설정하지 않는 것이 좋습니다!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "플러그인 업데이트 알림 받기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "정보"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "IP 주소로 프린터 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "직경 변경 확인"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "프린터의 IP 주소를 입력하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "새 필라멘트의 직경은 %1 mm로 설정되었으며, 현재 압출기와 호환되지 않습니다. 계속하시겠습니까?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "표시 이름"
+msgid "Could not connect to device."
+msgstr "장치에 연결할 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "재료 유형"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Ultimaker 프린터로 연결할 수 없습니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "색깔"
+msgid "The printer at this address has not responded yet."
+msgstr "이 주소의 프린터가 아직 응답하지 않았습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "속성"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "알 수 없는 프린터이거나 그룹의 호스트가 아니기 때문에 이 프린터를 추가할 수 없습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "밀도"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "연결"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "직경"
+msgid "Release Notes"
+msgstr "릴리즈 노트"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "필라멘트 비용"
+msgid "User Agreement"
+msgstr "사용자 계약"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "필라멘트 무게"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "동의"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "필라멘트 길이"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "거절 및 닫기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "미터 당 비용"
+msgid "What's New"
+msgstr "새로운 기능"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "다음 것"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "이 재료는 %1에 연결되어 있으며 일부 속성을 공유합니다."
+msgid "Add a Cloud printer"
+msgstr "클라우드 프린터 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "재료 연결 해제"
+msgid "Waiting for Cloud response"
+msgstr "클라우드 응답 대기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "설명"
+msgid "No printers found in your account?"
+msgstr "사용자의 계정에 프린터가 없습니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "접착 정보"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "사용자의 계정에 있는 다음 프린터를 Cura에 추가하였습니다:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "생성"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "수동으로 프린터 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "복제"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "재료 설정 및 Marketplace 플러그인 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "프린터와 동기화"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "재료 설정과 플러그인 백업 및 동기화"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "프린터"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Ultimaker 커뮤니티에서 48,000명 이상의 사용자와 아이디어를 공유하고 도움 받기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "재료 가져 오기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "건너뛰기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "재료를 가져올 수 없습니다"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Ultimaker 계정 무료 생성"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "재료를 성공적으로 가져왔습니다"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Ultimaker Cura에 오신 것을 환영합니다"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "재료 내보내기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr "Ultimaker Cura를 설정하려면 다음 단계로 이동하세요. 오래 걸리지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "재료를 내보내는데 실패했습니다"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "시작하기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "재료를 성공적으로 내보냈습니다"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "비어 있음"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "재료를 프린터와 동기화"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "제조업체"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "재료를 프린터와 동기화"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "프로파일 원작자"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "몇 가지 간단한 단계를 수행하면 모든 재료 프로파일과 프린터를 동기화할 수 있습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "프린터 이름"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "시작"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "프린터의 이름을 설정하십시오"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "재료 프로파일을 동기화해야 하는 이유는 무엇입니까?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "프린터 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "로그인"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "네트워크 프린터 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Digital Factory에 연결된 모든 프린터와 자동으로 재료 프로파일을 동기화하려면 Cura에 가입되어 있어야 합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "비 네트워크 프린터 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "재료를 USB로 동기화"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "네트워크에서 검색된 프린터가 없습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "다음 프린터는 새 재료 프로파일을 받게 됩니다:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "새로고침"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "재료를 프린터로 전송할 때 어떤 문제가 발생했습니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "IP로 프린터 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "다음 프린터에 재료 프로파일이 성공적으로 동기화되었습니다:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "클라우드 프린터 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "문제 해결"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "프린터가 없습니까?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ultimaker Cura를 개선하는 데 도움을 주십시오"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "모든 프린터가 켜져 있고 Digital Factory에 연결되어 있는지 확인하십시오."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "목록 새로고침"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "다시 시도"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "완료"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura는 인쇄 품질과 사용자 경험을 개선하기 위해 다음과 같은 익명 데이터를 수집합니다:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "동기화"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "기기 유형"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "동기화 중"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "재료 사용"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "프린터를 찾을 수 없음"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "슬라이드 수"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Digital Factory에 호환되는 프린터가 연결되지 않은 것 같습니다. 프린터가 연결되어 있고 최신 펌웨어가 설치되어 있는지 확인하십시오."
+msgid "Print settings"
+msgstr "인쇄 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Digital Factory에 프린터를 연결하는 방법 알아보기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura가 수집하는 데이터에는 개인 정보가 포함되어 있지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "새로고침"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "추가 정보"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "재료 프로파일을 USB로 동기화"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "개체 목록"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "새로운 재료 프로파일을 프린터로 로드하기 위해 다음 단계를 수행합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "지원으로 프린팅됩니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "재료 아카이브 내보내기 버튼을 클릭합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "이 모델과 중복되는 다른 모델은 수정됩니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr ".umm 파일을 USB 스틱에 저장합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "이 모델과 중복되는 내부채움은 수정됩니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "USB 스틱을 프린터에 삽입하고 새로운 재료 프로파일 로드 절차를 진행합니다."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "이 모델과의 중복은 지원되지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "새로운 재료 프로파일을 내 프린터로 로드하는 방법"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "%1 설정을 덮어씁니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "재료 아카이브 내보내기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "연결된 프린터"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "모든 재료 내보내기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "프린터 사전 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "보기 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "클라우드 프린터가 오프라인 상태입니다. 프린터가 켜져 있고 인터넷과 연결되어 있는지 확인하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "모두 확인"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "해당 프린터가 사용자의 계정에 연결되어 있지 않습니다. Ultimaker Digital Factory에 방문하여 연결을 설정하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "프린터"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "현재 클라우드 연결을 사용할 수 없습니다. 클라우드 프린터에 연결하려면 로그인하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "계산된"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "현재 클라우드 연결을 사용할 수 없습니다. 사용자의 인터넷 연결을 확인하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "설정"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "프린터 추가"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "프로파일"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "프린터 관리"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "현재 설정"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "단위"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "제목 없음"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "프린터에 연결되지 않음"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "프린터가 명령을 받아들이지 않습니다"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "유지 보수 중. 프린터를 확인하십시오"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "프린터와의 연결이 끊어졌습니다"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "프린팅..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "일시 중지됨"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "준비 중..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "프린트물을 제거하십시오"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "프린팅 중단"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "프린팅를 중단 하시겠습니까?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "선택한 모델을 %1로 프린팅하십시오"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "내 프린터"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Ultimaker Digital Factory의 프린터를 모니터링하십시오."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Digital Library에서 프린트 프로젝트를 생성하십시오."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "인쇄 작업"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "프린트 작업을 모니터링하고 프린트 기록에서 다시 프린트하십시오."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "플러그인 및 재료 프로파일을 사용하여 Ultimaker Cura를 확장하십시오."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Ultimaker e-러닝을 통해 3D 프린팅 전문가로 거듭나십시오."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Ultimaker support"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"일부 숨겨진 설정은 일반적인 계산 값과 다른 값을 사용합니다.\n"
+"\n"
+"이 설정을 표시하려면 클릭하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Ultimaker Cura로 시작하는 방법을 알아보십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "검색 설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "질문하기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "모든 익스트루더에 값 복사"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Ultimaker 커뮤니티에 문의하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "변경된 사항을 모든 익스트루더에 복사"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "버그 리포트"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "이 설정 숨기기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "개발자에게 문제를 알려주십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "이 설정을 표시하지 않음"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Ultimaker 웹 사이트를 방문하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "이 설정을 계속 표시하십시오"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "프린터 제어"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "설정 보기..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "조그 위치"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "영향을 미치는 모든 설정이 무효화되기 때문에 이 설정을 사용하지 않습니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "영향"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "영향을 받다"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "조그 거리"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "이 설정은 항상 모든 익스트루더 사이에 공유됩니다. 여기서 변경하면 모든 익스트루더에 대한 값이 변경됩니다."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Gcode 보내기"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "연결된 프린터에 사용자 정의 G 코드 명령을 보냅니다. ‘Enter’키를 눌러 명령을 전송하십시오."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "이 설정은 충돌하는 압출기별 값으로 결정됩니다:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "익스트루더"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "핫 엔드의 설정 온도입니다. 핫 엔드는 이 온도를 향해 가열되거나 냉각됩니다. 이 값이 0이면 온열 가열이 꺼집니다."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "이 익스트루더의 현재 온도."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "노즐을 예열하기 위한 온도."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "취소"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "예열"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "프린팅하기 전에 노즐을 미리 가열하십시오. 가열되는 동안 계속해서 프린팅물을 조정할 수 있으며, 프린팅 준비가 되면 노즐이 가열 될 때까지 기다릴 필요가 없습니다."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "이 익스트루더의 재료 색."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "이 익스트루더의 재료."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "이 익스트루더에 삽입 된 노즐."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "프린터가 연결되어 있지 않습니다."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"이 설정에는 프로파일과 다른 값이 있습니다.\n"
+"\n"
+"프로파일 값을 복원하려면 클릭하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "빌드 플레이트"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "가열 된 베드의 설정 온도. 베드가 이 온도로 가열되거나 식을 것입니다. 이 값이 0이면 베드 가열이 꺼집니다."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "가열 된 베드의 현재 온도."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "베드를 예열하기 위한 온도."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "프린팅하기 전에 베드를 미리 가열하십시오. 가열되는 동안 계속해서 프린팅물을 조정할 수 있으며, 프린팅 준비가 되면 베드가 가열 될 때까지 기다릴 필요가 없습니다."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "로그인"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- 재료 설정 및 Marketplace 플러그인 추가\n"
-"- 재료 설정과 플러그인 백업 및 동기화\n"
-"- Ultimaker 커뮤니티에서 48,000명 이상의 사용자와 아이디어를 공유하고 도움 받기"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Ultimaker 계정 무료 생성"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "마지막 업데이트: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker 계정"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "로그아웃"
+"이 설정은 일반적으로 계산되지만 현재는 절대 값이 설정되어 있습니다.\n"
+"\n"
+"계산 된 값을 복원하려면 클릭하십시오."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "확인 중..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "계정 동기화됨"
+msgid "Active print"
+msgstr "활성화된 프린트"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "오류가 발생하였습니다..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "보류된 업데이트 설치"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "계정 업데이트 확인"
+msgid "Job Name"
+msgstr "작업 이름"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "제목 없음"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "프린팅 시간"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "선택할 항목 없음"
+msgid "Estimated time left"
+msgstr "예상 남은 시간"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "온라인 문제 해결 가이드 표시"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "전채 화면 전환"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "전체 화면 종료"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "되돌리기(&U)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "다시하기(&R)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "종료(&Q)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "3D 보기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "앞에서 보기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "위에서 보기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "하단 뷰"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "왼쪽에서 보기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "오른쪽에서 보기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Cura 구성 ..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "프린터 추가..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "프린터 관리 ..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "재료 관리..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "마켓플레이스에서 더 많은 재료 추가"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "현재 설정으로로 프로파일 업데이트"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "현재 변경 사항 무시"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "현재 설정으로 프로파일 생성..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "프로파일 관리..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "온라인 문서 표시"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "버그 리포트"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "새로운 기능"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "소개..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "선택 항목 삭제"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "선택 항목 가운데 정렬"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "선택 항목 복제"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "모델 삭제"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "플랫폼중심에 모델 위치하기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "모델 그룹화"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "모델 그룹 해제"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "모델 합치기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "모델 복제..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "모든 모델 선택"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "빌드 플레이트 지우기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "모든 모델 다시 로드"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "모든 모델을 모든 빌드 플레이트에 정렬"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "모든 모델 정렬"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "선택한 모델 정렬"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "모든 모델의 위치 재설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "모든 모델의 변환 재설정"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "파일 열기..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "새로운 프로젝트..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "설정 폴더 표시"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "설정 보기..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&시장"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "영향을 미치는 모든 설정이 무효화되기 때문에 이 설정을 사용하지 않습니다."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "영향"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "영향을 받다"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "이 설정은 항상 모든 익스트루더 사이에 공유됩니다. 여기서 변경하면 모든 익스트루더에 대한 값이 변경됩니다."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "이 설정은 충돌하는 압출기별 값으로 결정됩니다:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"이 설정에는 프로파일과 다른 값이 있습니다.\n"
-"\n"
-"프로파일 값을 복원하려면 클릭하십시오."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"이 설정은 일반적으로 계산되지만 현재는 절대 값이 설정되어 있습니다.\n"
-"\n"
-"계산 된 값을 복원하려면 클릭하십시오."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "검색 설정"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "모든 익스트루더에 값 복사"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "변경된 사항을 모든 익스트루더에 복사"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "이 설정 숨기기"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "이 설정을 표시하지 않음"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "이 설정을 계속 표시하십시오"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"일부 숨겨진 설정은 일반적인 계산 값과 다른 값을 사용합니다.\n"
-"\n"
-"이 설정을 표시하려면 클릭하십시오."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "다시 시작한 후에 이 패키지가 설치됩니다."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "설정"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1 닫기"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "%1을(를) 정말로 종료하시겠습니까?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "패키지 설치"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D 보기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "파일 열기"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "앞에서 보기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "선택한 파일 내에 하나 이상의 G-코드 파일이 있습니다. 한 번에 하나의 G-코드 파일 만 열 수 있습니다. G-코드 파일을 열려면 하나만 선택하십시오."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "위에서 보기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "프린터 추가"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "왼쪽 보기"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "새로운 기능"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "오른쪽 보기"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "모델 별 설정을 제공합니다."
+msgid "Provides a prepare stage in Cura."
+msgstr "Cura에서 준비 단계 제공."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "모델 별 설정 도구"
+msgid "Prepare Stage"
+msgstr "준비 단계"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Cura 프로파일 가져 오기 지원을 제공합니다."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Cura 프로파일 내보내기 지원을 제공합니다."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura 프로파일 리더"
+msgid "Cura Profile Writer"
+msgstr "Cura 프로파일 작성자"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "X3D 파일을 읽을 수 있도록 지원합니다."
+msgid "Provides support for reading model files."
+msgstr "모델 파일 읽기 기능을 제공합니다."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D 리더"
+msgid "Trimesh Reader"
+msgstr "Trimesh 리더"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "구성을 백업하고 복원합니다."
+msgid "Checks for firmware updates."
+msgstr "펌웨어 업데이트를 확인합니다."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura 백업"
+msgid "Firmware Update Checker"
+msgstr "펌웨어 업데이트 검사기"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "기계 설정 (예 : 빌드 볼륨, 노즐 크기 등)을 변경하는 방법을 제공합니다."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "충돌을 보고하는 리포터가 사용할 수 있도록 특정 이벤트를 기록합니다"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "컴퓨터 설정 작업"
+msgid "Sentry Logger"
+msgstr "보초 로거"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "특정 장소에서 서포트 프린팅을 막는 지우개 메쉬(eraser mesh)를 만듭니다"
+msgid "Provides a monitor stage in Cura."
+msgstr "Cura에서 모니터 단계 제공."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Support Eraser"
+msgid "Monitor Stage"
+msgstr "모니터 단계"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5801,105 +5966,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "이동식 드라이브 출력 장치 플러그인"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "펌웨어 업데이트를 위한 기계 동작을 제공합니다."
+msgid "Provides support for reading AMF files."
+msgstr "AMF 파일 읽기가 지원됩니다."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "펌웨어 업데이터"
+msgid "AMF Reader"
+msgstr "AMF 리더"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "레거시 Cura 버전에서 프로파일 가져 오기를 지원합니다."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Ultimaker 포맷 패키지 읽기를 지원합니다."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "레거시 Cura 프로파일 리더"
+msgid "UFP Reader"
+msgstr "UFP 리더기"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "3MF 파일 읽기 지원."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "디지털 라이브러리와 연결하여 Cura에서 디지털 라이브러리를 통해 파일을 열고 저장할 수 있도록 합니다."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF 리더"
+msgid "Ultimaker Digital Library"
+msgstr "Ultimaker 디지털 라이브러리"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Ultimaker 포맷 패키지 작성을 지원합니다."
+msgid "Provides the Per Model Settings."
+msgstr "모델 별 설정을 제공합니다."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP 작성자"
+msgid "Per Model Settings Tool"
+msgstr "모델 별 설정 도구"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "충돌을 보고하는 리포터가 사용할 수 있도록 특정 이벤트를 기록합니다"
+msgid "Provides a machine actions for updating firmware."
+msgstr "펌웨어 업데이트를 위한 기계 동작을 제공합니다."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "보초 로거"
+msgid "Firmware Updater"
+msgstr "펌웨어 업데이터"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "G-코드 파일에서 프로파일 가져 오기를 지원합니다."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Ultimaker 네트워크 연결 프린터에 대한 네트워크 연결을 관리합니다."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "GCode 프로파일 리더기"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker 네트워크 연결"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Cura에서 미리 보기 단계를 제공합니다."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "가능한 프린팅 문제를 위해 모델 및 인쇄 구성을 확인하고 제안합니다."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "미리 보기 단계"
+msgid "Model Checker"
+msgstr "모델 검사기"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "엑스레이 뷰를 제공합니다."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "엑스레이 뷰"
+msgid "Simulation View"
+msgstr "시뮬레이션 뷰"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "CuraEngine 슬라이스 백엔드 링크를 제공합니다."
+msgid "Writes g-code to a file."
+msgstr "G Code를 파일에 씁니다."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine 백엔드"
+msgid "G-code Writer"
+msgstr "GCode 작성자"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "AMF 파일 읽기가 지원됩니다."
+msgid "Provides support for writing 3MF files."
+msgstr "3MF 파일 작성 지원을 제공합니다."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF 리더"
+msgid "3MF Writer"
+msgstr "3MF 기록기"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -5911,175 +6076,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "압축 된 G 코드 리더기"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "후처리를 위해 사용자가 만든 스크립트를 허용하는 확장 프로그램"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "XML 기반 재료 프로파일을 읽고 쓸 수있는 기능을 제공합니다."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "후처리"
+msgid "Material Profiles"
+msgstr "재료 프로파일"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Cura 프로파일 내보내기 지원을 제공합니다."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "CuraEngine 슬라이스 백엔드 링크를 제공합니다."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura 프로파일 작성자"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine 백엔드"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "G-코드를 수신하고 프린터로 보냅니다. 플러그인은 또한 펌웨어를 업데이트 할 수 있습니다."
+msgid "Provides support for reading X3D files."
+msgstr "X3D 파일을 읽을 수 있도록 지원합니다."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB 프린팅"
+msgid "X3D Reader"
+msgstr "X3D 리더"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Cura에서 준비 단계 제공."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "2D 이미지 파일에서 프린팅 가능한 지오메트리를 생성 할 수 있습니다."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "준비 단계"
+msgid "Image Reader"
+msgstr "이미지 리더"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "G-코드 파일을 로드하고 표시 할 수 있습니다."
+msgid "Provides support for reading 3MF files."
+msgstr "3MF 파일 읽기 지원."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-코드 리더"
+msgid "3MF Reader"
+msgstr "3MF 리더"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "2D 이미지 파일에서 프린팅 가능한 지오메트리를 생성 할 수 있습니다."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Ultimaker 포맷 패키지 작성을 지원합니다."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "이미지 리더"
+msgid "UFP Writer"
+msgstr "UFP 작성자"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Ultimaker 기계에 대한 기계 작동 제공(예 : 침대 수평 조정 마법사, 업그레이드 선택 등)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "레거시 Cura 버전에서 프로파일 가져 오기를 지원합니다."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker 기기 동작"
+msgid "Legacy Cura Profile Reader"
+msgstr "레거시 Cura 프로파일 리더"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "압축 된 아카이브에 g-code를 씁니다."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Cura 4.3에서 Cura 4.4로 구성을 업그레이드합니다."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "압축 된 G 코드 작성기"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "4.3에서 4.4로 버전 업그레이드"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "펌웨어 업데이트를 확인합니다."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Cura 2.1에서 Cura 2.2로 구성을 업그레이드합니다."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "펌웨어 업데이트 검사기"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "2.1에서 2.2로 버전 업그레이드"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "익명의 슬라이스 정보를 제출하십시오. 환경 설정을 통해 비활성화 할 수 있습니다."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Cura 4.1에서 Cura 4.2로 구성을 업그레이드합니다."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "슬라이스 정보"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "4.1에서 4.2로 버전 업그레이드"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "XML 기반 재료 프로파일을 읽고 쓸 수있는 기능을 제공합니다."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "재료 프로파일"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "디지털 라이브러리와 연결하여 Cura에서 디지털 라이브러리를 통해 파일을 열고 저장할 수 있도록 합니다."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Cura 4.5에서 Cura 4.6으로 구성을 업그레이드합니다."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Ultimaker 디지털 라이브러리"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "4.5에서 4.6으로 버전 업그레이드"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "새 Cura 패키지를 찾고, 관리하고 설치하십시오."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Cura 3.3에서 Cura 3.4로 구성을 업그레이드합니다."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "도구 상자"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "버전 업그레이드 3.3에서 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "G Code를 파일에 씁니다."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Cura 4.8에서 Cura 4.9로 구성을 업그레이드합니다."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "GCode 작성자"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "4.8에서 4.9로 버전 업그레이드"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "시뮬레이션 뷰를 제공합니다."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Cura 2.7에서 Cura 3.0으로 구성을 업그레이드합니다."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "시뮬레이션 뷰"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "2.7에서 3.0으로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Cura 4.5에서 Cura 4.6으로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Cura 4.4에서 Cura 4.5로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "4.5에서 4.6으로 버전 업그레이드"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "4.4에서 4.5로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Cura 2.5에서 Cura 2.6으로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Cura 3.0에서 Cura 3.1로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "2.5에서 2.6으로 버전 업그레이드"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "3.0에서 3.1로 버전 업그레이드"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6091,115 +6256,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "4.6.0에서 4.6.2로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Cura 4.7에서 Cura 4.8로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Cura 2.6에서 Cura 2.7로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "4.7에서 4.8로 버전 업그레이드"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "2.6에서 2.7으로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Cura 3.4에서 Cura 3.5로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Cura 4.2에서 Cura 4.3으로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "3.4에서 3.5로 버전 업그레이드"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "4.2에서 4.3로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Cura 2.1에서 Cura 2.2로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Cura 4.0에서 Cura 4.1로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "2.1에서 2.2로 버전 업그레이드"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "버전 업그레이드 4.0에서 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Cura 3.2에서 Cura 3.3으로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Cura 4.6.2에서 Cura 4.7로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "3.2에서 3.3으로 버전 업그레이드"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "4.6.2에서 4.7로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Cura 4.8에서 Cura 4.9로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Cura 4.9에서 Cura 4.10으로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "4.8에서 4.9로 버전 업그레이드"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "4.9에서 4.10으로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Cura 4.6.2에서 Cura 4.7로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Cura 2.2에서 Cura 2.4로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "4.6.2에서 4.7로 버전 업그레이드"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "2.2에서 2.4로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Cura 4.2에서 Cura 4.3으로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Cura 3.2에서 Cura 3.3으로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "4.2에서 4.3로 버전 업그레이드"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "3.2에서 3.3으로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Cura 4.3에서 Cura 4.4로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Cura 2.5에서 Cura 2.6으로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "4.3에서 4.4로 버전 업그레이드"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "2.5에서 2.6으로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Cura 4.9에서 Cura 4.10으로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Cura 3.5에서 Cura 4.0으로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "4.9에서 4.10으로 버전 업그레이드"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "버전 업그레이드 3.5에서 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Cura 2.7에서 Cura 3.0으로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Cura 3.4에서 Cura 3.5로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "2.7에서 3.0으로 버전 업그레이드"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "3.4에서 3.5로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Cura 2.6에서 Cura 2.7로 구성을 업그레이드합니다."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Cura 4.7에서 Cura 4.8로 구성을 업그레이드합니다."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "2.6에서 2.7으로 버전 업그레이드"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "4.7에서 4.8로 버전 업그레이드"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6211,105 +6376,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "4.11에서 4.12로 버전 업그레이드"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Cura 3.3에서 Cura 3.4로 구성을 업그레이드합니다."
+msgid "Backup and restore your configuration."
+msgstr "구성을 백업하고 복원합니다."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "버전 업그레이드 3.3에서 3.4"
+msgid "Cura Backups"
+msgstr "Cura 백업"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Cura 3.0에서 Cura 3.1로 구성을 업그레이드합니다."
+msgid "Provides support for importing Cura profiles."
+msgstr "Cura 프로파일 가져 오기 지원을 제공합니다."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "3.0에서 3.1로 버전 업그레이드"
+msgid "Cura Profile Reader"
+msgstr "Cura 프로파일 리더"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Cura 4.0에서 Cura 4.1로 구성을 업그레이드합니다."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "익명의 슬라이스 정보를 제출하십시오. 환경 설정을 통해 비활성화 할 수 있습니다."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "버전 업그레이드 4.0에서 4.1"
+msgid "Slice info"
+msgstr "슬라이스 정보"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Cura 4.4에서 Cura 4.5로 구성을 업그레이드합니다."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "G-코드 파일에서 프로파일 가져 오기를 지원합니다."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "4.4에서 4.5로 버전 업그레이드"
+msgid "G-code Profile Reader"
+msgstr "GCode 프로파일 리더기"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Cura 2.2에서 Cura 2.4로 구성을 업그레이드합니다."
+msgid "Writes g-code to a compressed archive."
+msgstr "압축 된 아카이브에 g-code를 씁니다."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "2.2에서 2.4로 버전 업그레이드"
+msgid "Compressed G-code Writer"
+msgstr "압축 된 G 코드 작성기"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Cura 4.1에서 Cura 4.2로 구성을 업그레이드합니다."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "후처리를 위해 사용자가 만든 스크립트를 허용하는 확장 프로그램"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "4.1에서 4.2로 버전 업그레이드"
+msgid "Post Processing"
+msgstr "후처리"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Cura 3.5에서 Cura 4.0으로 구성을 업그레이드합니다."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "특정 장소에서 서포트 프린팅을 막는 지우개 메쉬(eraser mesh)를 만듭니다"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "버전 업그레이드 3.5에서 4.0"
+msgid "Support Eraser"
+msgstr "Support Eraser"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Ultimaker 네트워크 연결 프린터에 대한 네트워크 연결을 관리합니다."
+msgid "Provides a preview stage in Cura."
+msgstr "Cura에서 미리 보기 단계를 제공합니다."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker 네트워크 연결"
+msgid "Preview Stage"
+msgstr "미리 보기 단계"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "모델 파일 읽기 기능을 제공합니다."
+msgid "Provides the X-Ray view."
+msgstr "엑스레이 뷰를 제공합니다."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh 리더"
+msgid "X-Ray View"
+msgstr "엑스레이 뷰"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Ultimaker 포맷 패키지 읽기를 지원합니다."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Ultimaker 기계에 대한 기계 작동 제공(예 : 침대 수평 조정 마법사, 업그레이드 선택 등)"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP 리더기"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker 기기 동작"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6321,35 +6496,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "솔리드 뷰"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "3MF 파일 작성 지원을 제공합니다."
+msgid "Allows loading and displaying G-code files."
+msgstr "G-코드 파일을 로드하고 표시 할 수 있습니다."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF 기록기"
+msgid "G-code Reader"
+msgstr "G-코드 리더"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Cura에서 모니터 단계 제공."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "기계 설정 (예 : 빌드 볼륨, 노즐 크기 등)을 변경하는 방법을 제공합니다."
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "모니터 단계"
+msgid "Machine Settings Action"
+msgstr "컴퓨터 설정 작업"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "가능한 프린팅 문제를 위해 모델 및 인쇄 구성을 확인하고 제안합니다."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "G-코드를 수신하고 프린터로 보냅니다. 플러그인은 또한 펌웨어를 업데이트 할 수 있습니다."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "모델 검사기"
+msgid "USB printing"
+msgstr "USB 프린팅"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "재료를 프린터와 동기화"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "변경 사항이 적용되기 전에 {}을(를) 멈추고 다시 시작해야 합니다."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "동기화 중..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Ultimaker 계정에서 변경 사항이 감지되었습니다"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "귀하의 계정으로 재료와 소프트웨어 패키지를 동기화하시겠습니까?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "동기화"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "계정에서 거절 및 제거"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "{}개의 플러그인을 다운로드하지 못했습니다"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "플러그인 사용 계약"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "이미지 변환 ..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "빌드 플레이트의 폭 (밀리미터)."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "시장"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "패키지의 변경 사항이 적용되기 전에 Cura를 다시 시작해야 합니다."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "설치"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "설치됨"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "프리미엄"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "웹 마켓플레이스로 이동"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "재료 검색"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "호환성"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "기기"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "빌드 플레이트"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "서포트"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "품질"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "기술 데이터 시트"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "안전 데이터 시트"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "인쇄 가이드라인"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "웹 사이트"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "설치 또는 업데이트에 <a href='%1'>로그인</a> 필요"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>재료 스플 구입</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "업데이트"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "업데이트 중"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "업데이트됨"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "뒤로"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "플러그인"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "설치됨"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "다시 시작 시 설치 예정"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "업데이트에 <a href='%1'>로그인</a> 필요"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "다운그레이드"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "설치 제거"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "커뮤니티 기여"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "커뮤니티 플러그인"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "일반 재료"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "패키지 가져오는 중..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "웹 사이트"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "이메일"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Ultimaker Cura Enterprise용으로 검증된 플러그인 및 재료를 받으려면 로그인하십시오"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "버전"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "마지막으로 업데이트한 날짜"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "다운로드"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "설치된 플러그인"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "설치된 플러그인이 없습니다."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "설치된 재료"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "설치된 재료가 없습니다."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "번들 플러그인"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "번들 재료"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Cura 패키지 데이터베이스에 연결할 수 없습니다. 연결을 확인하십시오."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "패키지를 설치하려면 라이선스를 수락해야 합니다"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "계정의 변경 사항"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "취소"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "다음 패키지가 추가됩니다:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "호환되지 않는 Cura 버전이기 때문에 다음 패키지를 설치할 수 없습니다:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "제거 확인"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "아직 사용 중인 재료 및/또는 프로파일을 제거합니다. 확인하면 다음 재료/프로파일이 기본값으로 재설정됩니다."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "재료"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "프로파일"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "확인"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "이 출력물에는 문제가있을 수 있습니다. 조정을 위한 도움말을 보려면 클릭하십시오."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "평면 개체 처리를 위한 지원 라이브러리"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "일부 프로파일 설정을 사용자 정의했습니다.\n"
+#~ "프로파일 전환 후에도 변경된 설정을 유지하시겠습니까?\n"
+#~ "또는 변경 사항을 버리고 '%1'에서 기본값을 로드할 수 있습니다."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "빌드 플레이트(&B)"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "생성"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "복제"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "프린터: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "현재 설정 / 재정의 프로파일 업데이트"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "테마:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "이러한 변경 사항을 적용하려면 응용 프로그램을 다시 시작해야합니다."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "추가 정보"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "생성"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "프린터와 동기화"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "프린터"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "단위"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "온라인 문제 해결 가이드 표시"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "마켓플레이스에서 더 많은 재료 추가"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "모든 모델을 모든 빌드 플레이트에 정렬"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&시장"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "새 Cura 패키지를 찾고, 관리하고 설치하십시오."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "도구 상자"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "시뮬레이션 뷰를 제공합니다."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/ko_KR/fdmextruder.def.json.po b/resources/i18n/ko_KR/fdmextruder.def.json.po
index 9850f464de..81b05d67d4 100644
--- a/resources/i18n/ko_KR/fdmextruder.def.json.po
+++ b/resources/i18n/ko_KR/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:01+0200\n"
 "Last-Translator: Korean <info@bothof.nl>\n"
 "Language-Team: Jinbum Kim <Jinbuhm.Kim@gmail.com>, Korean <info@bothof.nl>\n"
diff --git a/resources/i18n/ko_KR/fdmprinter.def.json.po b/resources/i18n/ko_KR/fdmprinter.def.json.po
index e1001c29e8..d42a5289ce 100644
--- a/resources/i18n/ko_KR/fdmprinter.def.json.po
+++ b/resources/i18n/ko_KR/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:02+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Korean <info@lionbridge.com>, Jinbum Kim <Jinbuhm.Kim@gmail.com>, Korean <info@bothof.nl>\n"
@@ -57,7 +57,9 @@ msgctxt "machine_start_gcode description"
 msgid ""
 "G-code commands to be executed at the very start - separated by \n"
 "."
-msgstr "시작과 동시에형실행될 G 코드 명령어 \n."
+msgstr ""
+"시작과 동시에형실행될 G 코드 명령어 \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
@@ -69,7 +71,9 @@ msgctxt "machine_end_gcode description"
 msgid ""
 "G-code commands to be executed at the very end - separated by \n"
 "."
-msgstr "맨 마지막에 실행될 G 코드 명령 \n."
+msgstr ""
+"맨 마지막에 실행될 G 코드 명령 \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "material_guid label"
@@ -463,8 +467,8 @@ msgstr "머신 헤드 및 팬 폴리곤"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "프린트 헤드의 2D 실루엣 (팬 뚜껑 포함)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -737,6 +741,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "피더에서 재료를 구동시키는 휠의 지름."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "품질"
@@ -957,6 +971,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "벽의 수. 벽 두께로 계산할 때 이 값은 반올림됩니다."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "외벽 이동 거리"
@@ -987,14 +1051,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "수축 및 이동 거리를 줄이도록 벽이 인쇄되는 순서를 최적화합니다. 대부분의 부품은 이 기능을 사용하면 도움이 되지만 실제로는 시간이 오래 걸릴 수 있으므로, 최적화 여부와 관계없이 인쇄 시간을 비교하십시오. 빌드 플레이트 접착 유형을 Brim으로 선택하는 경우 첫 번째 층이 최적화되지 않습니다."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "내벽 앞부분 바깥 쪽"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "활성화 되었을 때 외부에서 내부로 벽을 프린팅합니다. 이것은 ABS와 같은 고점도 플라스틱을 사용할 때 X와 Y의 치수 정확도를 향상시키는 데 도움이 됩니다. 그러나 특히 오버행의 경우 표면 프린팅 품질을 떨어 뜨릴 수 있습니다."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1007,94 +1081,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "다른 모든 레이어에 여분의 벽을 프린팅합니다. 이렇게하면 내부채움이 여분의 벽 사이에 끼어 더 강하게 프린팅됩니다."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "벽 겹침 보정"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "이미 벽이있는 곳에 프린팅중인 벽의 부분에 대한 흐름을 보정하십시오."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "외벽 겹침 보정"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "이미 벽이있는 곳에 프린팅되는 외벽 부분에 대한 흐름을 보정합니다."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "내부 벽 겹침 보정"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "이미 벽이있는 곳에 프린팅되는 내부 벽 부분에 대한 흐름을 보정하십시오."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "최소 압출량"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "벽 라인에 대한 최소 허용 백분율 흐름 벽 오버랩 보상이 기존 벽과 가까울 때 벽의 흐름을 줄입니다. 흐름이 이 값보다 작은 벽은 이동으로 대체됩니다. 이 설정을 사용하는 경우 벽 오버랩 보상을 사용하고 내벽 전에 외벽을 인쇄해야 합니다."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "리트렉션 선호"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "이 옵션을 사용하면 흐름이 최소 흐름 임계 값보다 낮은 벽을 교체하는 이동에 대해 빗질 대신에 리트렉션을 사용합니다."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "벽 사이의 간격 채우기"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "벽이 딱 맞지 않는 벽 사이의 간격을 채웁니다."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "아무데도"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "얇은 벽 프린팅"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "어디에나"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "노즐 크기보다 수평으로 더 얇은 모델 조각을 프린팅하십시오."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "매우 작은 간격 차단"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "매우 작은 간격을 차단하여 모델 외부의 얼룩을 줄입니다."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "얇은 벽 프린팅"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "노즐 크기보다 수평으로 더 얇은 모델 조각을 프린팅하십시오."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -1729,8 +1793,7 @@ msgstr "내부채움 패턴"
 #: fdmprinter.def.json
 msgctxt "infill_pattern description"
 msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object."
-msgstr "프린트 내부채움 재료의 패턴입니다. 선형과 지그재그형 내부채움이 서로 다른 레이어에서 방향을 바꾸므로 재료비가 절감됩니다. 격자, 삼각형, 트라이 헥사곤 (tri-hexagon), 큐빅, 옥텟 (octet), 쿼터 큐빅, 크로스, 동심원 패턴이 레이어마다 완전히 프린트됩니다."
-" 자이로이드 (Gyroid), 큐빅, 쿼터 큐빅, 옥텟 (octet) 내부채움이 레이어마다 변경되므로 각 방향으로 힘이 더 균등하게 분산됩니다. 라이트닝 내부채움이 객체의 천장만 서포트하여 내부채움을 최소화합니다."
+msgstr "프린트 내부채움 재료의 패턴입니다. 선형과 지그재그형 내부채움이 서로 다른 레이어에서 방향을 바꾸므로 재료비가 절감됩니다. 격자, 삼각형, 트라이 헥사곤 (tri-hexagon), 큐빅, 옥텟 (octet), 쿼터 큐빅, 크로스, 동심원 패턴이 레이어마다 완전히 프린트됩니다. 자이로이드 (Gyroid), 큐빅, 쿼터 큐빅, 옥텟 (octet) 내부채움이 레이어마다 변경되므로 각 방향으로 힘이 더 균등하게 분산됩니다. 라이트닝 내부채움이 객체의 천장만 서포트하여 내부채움을 최소화합니다."
 
 #: fdmprinter.def.json
 msgctxt "infill_pattern option grid"
@@ -2197,6 +2260,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "냉각됨에 따라 재료 수축을 보상하기 위해 모델이 이 배율로 확장됩니다."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "결정형 소재"
@@ -2707,24 +2790,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "처음 몇 개의 레이어는 모델의 나머지 부분보다 느리게 프린팅되어 빌드 플레이트에 대한보다 나은 접착력을 얻고 출력물의 전체 성공률을 향상시킵니다. 속도는 이 층 위로 점진적으로 증가합니다."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "필라멘트 흐름 균일화"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "일반 라인보다 얇게 프린팅하여 초당 압출되는 재료의 양이 동일하게 유지되도록 하십시오. 모델의 얇은 부분에는 설정에서 제공 한 것보다 작은 선 너비로 선이 프린팅되어야 할 수 있습니다. 이 설정은 이러한 선의 속도 변경을 제어합니다."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "압출량 균등화를위한 최대 속도"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "흐름을 균등하게 유지하기위해 조정되는 최대 프린팅 속도."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4462,6 +4535,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "스커트 / 브림 / 래프트 프린팅에 사용하는 익스트루더. 이것은 다중 압출에 사용됩니다."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "스커트 선 수"
@@ -4626,6 +4739,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "상단 래프트 레이어에 대한 래프트 사이의 거리. 간격은 선 너비와 동일해야 표면이 단색입니다."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "래프트 중간 두께"
@@ -5126,6 +5249,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "최대 해상도 설정에 대한 해상도를 낮추면 최대 편차를 사용할 수 있습니다.  최대 편차를 높이면 프린트의 정확도는 감소하지만, G 코드도 감소합니다. 최대 편차는 최대 해상도의 한계이며, 따라서 두 항목이 충돌하면 항상 최대 편차가 우선합니다."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "특수 모드"
@@ -6418,6 +6551,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "첫 번째 레이어의 소형 피처는 정상적인 프린트 속도의 이 비율로 프린팅됩니다. 프린트 속도가 느리면 부착과 정확도가 개선됩니다."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "커맨드 라인 설정"
@@ -6477,6 +6640,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "파일로부터 로드 하는 경유, 모델에 적용될 변환 행렬입니다."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "프린트 헤드의 2D 실루엣 (팬 뚜껑 포함)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "내벽 앞부분 바깥 쪽"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "활성화 되었을 때 외부에서 내부로 벽을 프린팅합니다. 이것은 ABS와 같은 고점도 플라스틱을 사용할 때 X와 Y의 치수 정확도를 향상시키는 데 도움이 됩니다. 그러나 특히 오버행의 경우 표면 프린팅 품질을 떨어 뜨릴 수 있습니다."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "벽 겹침 보정"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "이미 벽이있는 곳에 프린팅중인 벽의 부분에 대한 흐름을 보정하십시오."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "외벽 겹침 보정"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "이미 벽이있는 곳에 프린팅되는 외벽 부분에 대한 흐름을 보정합니다."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "내부 벽 겹침 보정"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "이미 벽이있는 곳에 프린팅되는 내부 벽 부분에 대한 흐름을 보정하십시오."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "최소 압출량"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "벽 라인에 대한 최소 허용 백분율 흐름 벽 오버랩 보상이 기존 벽과 가까울 때 벽의 흐름을 줄입니다. 흐름이 이 값보다 작은 벽은 이동으로 대체됩니다. 이 설정을 사용하는 경우 벽 오버랩 보상을 사용하고 내벽 전에 외벽을 인쇄해야 합니다."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "리트렉션 선호"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "이 옵션을 사용하면 흐름이 최소 흐름 임계 값보다 낮은 벽을 교체하는 이동에 대해 빗질 대신에 리트렉션을 사용합니다."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "벽 사이의 간격 채우기"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "벽이 딱 맞지 않는 벽 사이의 간격을 채웁니다."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "아무데도"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "어디에나"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "매우 작은 간격 차단"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "매우 작은 간격을 차단하여 모델 외부의 얼룩을 줄입니다."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "필라멘트 흐름 균일화"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "일반 라인보다 얇게 프린팅하여 초당 압출되는 재료의 양이 동일하게 유지되도록 하십시오. 모델의 얇은 부분에는 설정에서 제공 한 것보다 작은 선 너비로 선이 프린팅되어야 할 수 있습니다. 이 설정은 이러한 선의 속도 변경을 제어합니다."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "압출량 균등화를위한 최대 속도"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "흐름을 균등하게 유지하기위해 조정되는 최대 프린팅 속도."
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "시작과 동시에형실행될 G 코드 명령어 \\n."
diff --git a/resources/i18n/nl_NL/cura.po b/resources/i18n/nl_NL/cura.po
index d630cbc53c..2a1571cb35 100644
--- a/resources/i18n/nl_NL/cura.po
+++ b/resources/i18n/nl_NL/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2021-09-07 08:01+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Dutch <info@lionbridge.com>, Dutch <info@bothof.nl>\n"
@@ -17,1507 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 3.0\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Kan geen archief maken van gegevensmap van gebruiker: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Back-up"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Geprobeerd een Cura-back-up te herstellen zonder correcte gegevens of metadata."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Geprobeerd een Cura-back-up te herstellen van een versie die hoger is dan de huidige versie."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "De volgende fout is opgetreden bij het herstellen van een Cura-backup:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Synchroniseer de materiaalprofielen met uw printer voordat u gaat printen."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Nieuwe materialen geïnstalleerd"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Synchroniseer materialen"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "Meer informatie"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "Kan materiaalarchief niet opslaan op {}:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Opslaan materiaalarchief mislukt"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Onbekende fout."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "De hoogte van het bouwvolume is verminderd wegens de waarde van de instelling “Printvolgorde”, om te voorkomen dat de rijbrug tegen geprinte modellen botst."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Werkvolume"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Niet overschreven"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Onbekend"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Kan de onderstaande printer(s) niet verbinden omdat deze deel uitmaakt/uitmaken van een groep"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Beschikbare netwerkprinters"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Voorbereiden"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura-profiel"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Aangepaste profielen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Gecomprimeerde driehoeksnet openen"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Alle Ondersteunde Typen ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Alle Bestanden (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visueel"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Het visuele profiel is ontworpen om visuele prototypen en modellen te printen met als doel een hoge visuele en oppervlaktekwaliteit te creëren."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Het engineeringprofiel is ontworpen om functionele prototypen en onderdelen voor eindgebruik te printen met als doel een grotere precisie en nauwere toleranties."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Ontwerp"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Het ontwerpprofiel is ontworpen om initiële prototypen en conceptvalidatie te printen met als doel de printtijd aanzienlijk te verkorten."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Aangepast materiaal"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Aangepast"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Inloggen mislukt"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Nieuwe locatie vinden voor objecten"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Locatie vinden"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Kan locatie niet vinden"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Kan geen materiaalarchief maken voor synchronisatie met printers."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Kan het materiaalarchief niet laden voor synchronisatie met printers."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "Antwoord van Digital Factor is mogelijk beschadigd."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "In het antwoord van Digital Factory ontbreekt belangrijke informatie."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Kan geen verbinding maken met Digital Factory voor de synchronisatie van materialen met enkele printers."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Kan geen verbinding maken met Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Machines laden..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Voorkeuren instellen..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Actieve machine initialiseren ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Machinebeheer initialiseren ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Werkvolume initialiseren ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Scene instellen..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Interface laden..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Engine initialiseren ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Er kan slechts één G-code-bestand tegelijkertijd worden geladen. Het importeren van {0} is overgeslagen"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Waarschuwing"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Kan geen ander bestand openen als G-code wordt geladen. Het importeren van {0} is overgeslagen"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Fout"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Overslaan"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Sluiten"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Volgende"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Voltooien"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Toevoegen"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Annuleren"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Groepsnummer #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Buitenwand"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Binnenwanden"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Skin"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Vulling"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Supportvulling"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Verbindingsstructuur"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Supportstructuur"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Skirt"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Primepijler"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Beweging"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Intrekkingen"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Overig(e)"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "De release notes konden niet worden geopend."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura kan niet worden gestart"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>Oeps, Ultimaker Cura heeft een probleem gedetecteerd.</p></b>\n"
-"                    <p>Tijdens het opstarten is een onherstelbare fout opgetreden. Deze fout is mogelijk veroorzaakt door enkele onjuiste configuratiebestanden. Het wordt aanbevolen een back-up te maken en de standaardinstelling van uw configuratie te herstellen.</p>\n"
-"                    <p>Back-ups bevinden zich in de configuratiemap.</p>\n"
-"                    <p>Stuur ons dit crashrapport om het probleem op te lossen.</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Het crashrapport naar Ultimaker verzenden"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Gedetailleerd crashrapport weergeven"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Open Configuratiemap"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Back-up maken en herstellen van configuratie"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Crashrapport"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Er is een fatale fout opgetreden in Cura. Stuur ons het crashrapport om het probleem op te lossen</p></b>\n"
-"            <p>Druk op de knop \"Rapport verzenden\" om het foutenrapport automatisch naar onze servers te verzenden</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Systeeminformatie"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Onbekend"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Cura-versie"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Taal van Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "Taal van besturingssysteem"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Platform"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qt version"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQt version"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Nog niet geïnitialiseerd<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGL-versie: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL-leverancier: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL-renderer: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Traceback van fout"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Logboeken"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Rapport verzenden"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Er kan geen nieuw aanmeldingsproces worden gestart. Controleer of een andere aanmeldingspoging nog actief is."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Kan de Ultimaker-accountserver niet bereiken."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "Aanmelden mislukt"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "De opgegeven status is niet juist."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Time-out tijdens verificatie bij de accountserver."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Verleen de vereiste toestemmingen toe bij het autoriseren van deze toepassing."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Er heeft een onverwachte gebeurtenis plaatsgevonden bij het aanmelden. Probeer het opnieuw."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Kan het antwoord niet lezen."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Objecten verveelvoudigen en plaatsen"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Objecten plaatsen"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Object plaatsen"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Niet ondersteund"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Nozzle"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "De instellingen zijn gewijzigd zodat deze overeenkomen met de huidige beschikbaarheid van extruders:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "De instellingen zijn bijgewerkt"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder(s) uitgeschakeld"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Het Bestand Bestaat Al"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Het bestand <filename>{0}</filename> bestaat al. Weet u zeker dat u dit bestand wilt overschrijven?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "Ongeldige bestands-URL:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Kan het profiel niet exporteren als <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Kan het profiel niet exporteren als <filename>{0}</filename>: Plug-in voor de schrijver heeft een fout gerapporteerd."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Het profiel is geëxporteerd als <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "De export is voltooid"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>: {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Kan het profiel niet importeren uit <filename>{0}</filename> voordat een printer toegevoegd is."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Er is geen aangepast profiel om in het bestand <filename>{0}</filename> te importeren"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Dit profiel <filename>{0}</filename> bevat incorrecte gegevens. Kan het profiel niet importeren."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "Het profiel {0} is geïmporteerd."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "Het bestand {0} bevat geen geldig profiel."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Het profiel {0} heeft een onbekend bestandstype of is beschadigd."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Aangepast profiel"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Er ontbreekt een kwaliteitstype in het profiel."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Er is nog geen actieve printer."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "Kan het profiel niet toevoegen."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "Kwaliteitstype '{0}' is niet compatibel met de huidige actieve machinedefinitie '{1}'."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Waarschuwing: het profiel is niet zichtbaar omdat het kwaliteitstype '{0}' van het profiel niet beschikbaar is voor de huidige configuratie. Schakel naar een materiaal-nozzle-combinatie waarvoor dit kwaliteitstype geschikt is."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Instellingen per Model"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Instellingen per Model configureren"
+msgid "glTF Binary"
+msgstr "glTF-binair"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura-profiel"
+msgid "glTF Embedded JSON"
+msgstr "glTF-ingesloten JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D-bestand"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Er is een fout opgetreden tijdens het herstellen van uw back-up."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Back-ups"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Er is een fout opgetreden tijdens het uploaden van uw back-up."
+msgid "Stanford Triangle Format"
+msgstr "Stanford-driehoeksformaat"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Uw back-up maken..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Gecomprimeerde COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Er is een fout opgetreden bij het maken van de back-up."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Geen toegang tot update-informatie."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Uw back-up wordt geüpload..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Er zijn mogelijk nieuwe functies of foutoplossingen beschikbaar voor uw {machine_name}. Als u dit nog niet hebt gedaan, is het raadzaam om de firmware op uw printer bij te werken naar versie {latest_version}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Uw back-up is geüpload."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "Nieuwe stabiele firmware voor %s beschikbaar"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "De back-up is groter dan de maximale bestandsgrootte."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Instructies voor bijwerken"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Back-ups beheren"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Machine-instellingen"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Supportblokkering"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Maak een volume waarin supportstructuren niet worden geprint."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Verwisselbaar Station"
+msgid "Monitor"
+msgstr "Controleren"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Opslaan op verwisselbaar station"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Opslaan op Verwisselbaar Station {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Er zijn geen bestandsindelingen beschikbaar om te schrijven!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Opslaan op Verwisselbaar Station <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Opslaan"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Kan niet opslaan als <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Kan geen bestandsnaam vinden tijdens het schrijven naar {device}."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Kan niet opslaan op verwisselbaar station {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Fout"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Opgeslagen op Verwisselbaar Station {0} als {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Bestand opgeslagen"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Uitwerpen"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Verwisselbaar station {0} uitwerpen"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0} is uitgeworpen. U kunt het station nu veilig verwijderen."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Hardware veilig verwijderen"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Uitwerpen van {0} is niet gelukt. Mogelijk wordt het station door een ander programma gebruikt."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Firmware bijwerken"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04-profielen"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Aanbevolen"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Aangepast"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Projectbestand <filename>{0}</filename> bevat een onbekend type machine <message>{1}</message>. Kan de machine niet importeren. In plaats daarvan worden er modellen geïmporteerd."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Projectbestand Openen"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Projectbestand <filename>{0}</filename> is plotseling ontoegankelijk: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Kan projectbestand niet openen"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "Projectbestand <filename>{0}</filename> is corrupt: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Projectbestand <filename>{0}</filename> wordt gemaakt met behulp van profielen die onbekend zijn bij deze versie van Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF-bestand"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Kan niet naar UFP-bestand schrijven:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Format Package"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code-bestand"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Voorbeeld"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgenweergave"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Lagen verwerken"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "Informatie"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "Slicen is mislukt door een onverwachte fout. Overweeg om de fout te melden via onze issue tracker."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "Slicen mislukt"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Een fout melden"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Meld een fout via de issue tracker van Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Kan niet slicen"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Met de huidige instellingen is slicing niet mogelijk. De volgende instellingen bevatten fouten: {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Slicing is niet mogelijk vanwege enkele instellingen per model. De volgende instellingen bevatten fouten voor een of meer modellen: {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Slicen is niet mogelijk omdat de terugduwpijler of terugduwpositie(s) ongeldig zijn."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Slicen is niet mogelijk omdat er objecten gekoppeld zijn aan uitgeschakelde Extruder %s."
+msgid "Warning"
+msgstr "Waarschuwing"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Controleer de instellingen en zorg ervoor dat uw modellen:\n"
-"- binnen het werkvolume passen\n"
-"- zijn toegewezen aan een ingeschakelde extruder\n"
-"- niet allemaal zijn ingesteld als modificatierasters"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Verwisselbaar Station"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "AMF-bestand"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Gecomprimeerd G-code-bestand"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Nabewerking"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-code wijzigen"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB-printen"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Printen via USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Via USB Printen"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Aangesloten via USB"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Format Package"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Er wordt momenteel via USB geprint. Wanneer u Cura afsluit, wordt het printen gestopt. Weet u zeker dat u wilt afsluiten?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Er wordt nog een print afgedrukt. Cura kan pas een nieuwe print via USB starten zodra de vorige print is voltooid."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Bezig met printen"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Voorbereiden"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-code parseren"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Details van de G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Zorg ervoor dat de G-code geschikt is voor uw printer en de printerconfiguratie voordat u het bestand verzendt. Mogelijk is de weergave van de G-code niet nauwkeurig."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G-bestand"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG-afbeelding"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG-afbeelding"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG-afbeelding"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP-afbeelding"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF-afbeelding"
+msgid "Per Model Settings"
+msgstr "Instellingen per Model"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Platform kalibreren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Instellingen per Model configureren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Upgrades selecteren"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter ondersteunt geen tekstmodus."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Geen toegang tot update-informatie."
+msgid "Update Firmware"
+msgstr "Firmware bijwerken"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Er zijn mogelijk nieuwe functies of foutoplossingen beschikbaar voor uw {machine_name}. Als u dit nog niet hebt gedaan, is het raadzaam om de firmware op uw printer bij te werken naar versie {latest_version}."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "Nieuwe stabiele firmware voor %s beschikbaar"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Instructies voor bijwerken"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "Kan het voorbeeldgegevensbestand niet lezen."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "U moet {} afsluiten en herstarten voordat de wijzigingen van kracht worden."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchroniseren ..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Wijzigingen gedetecteerd van uw Ultimaker-account"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Wilt u materiaal- en softwarepackages synchroniseren met uw account?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchroniseren"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Weigeren en verwijderen uit account"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} plug-ins zijn niet gedownload"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Nee, ik ga niet akkoord"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Akkoord"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Licentieovereenkomst plug-in"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter ondersteunt geen non-tekstmodus."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Bereid voorafgaand aan het exporteren G-code voor."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Als Draadprinten is ingeschakeld, geeft Cura lagen niet goed weer."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura heeft materiaalprofielen gedetecteerd die nog niet op de hostprinter van groep {0} zijn geïnstalleerd."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Simulatieweergave"
+msgid "Sending materials to printer"
+msgstr "De materialen worden naar de printer verzonden"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Er wordt niets weergegeven omdat u eerst moet slicen."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "U probeert verbinding te maken met {0}, maar deze is niet de host van een groep. U kunt de webpagina bezoeken om deze als groephost te configureren."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Geen lagen om weer te geven"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Dit bericht niet meer weergeven"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Laagweergave"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Printen via netwerk"
+msgid "Not a group host"
+msgstr "Geen groephost"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Printen via netwerk"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Groep configureren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Via het netwerk verbonden"
+msgid "Sending Print Job"
+msgstr "Printtaak verzenden"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "morgen"
+msgid "Uploading print job to printer."
+msgstr "Printtaak naar printer aan het uploaden."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "vandaag"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "Wachtrij voor afdruktaken is vol. De printer kan geen nieuwe taken accepteren."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Verbinding Maken via Netwerk"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "Wachtrij vol"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Wacht tot de huidige taak is verzonden."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Printfout"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "De printtaak is naar de printer verzonden."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Gegevens verzonden"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "U probeert verbinding te maken met een printer waarop Ultimaker Connect niet wordt uitgevoerd. Werk de printer bij naar de nieuwste firmware."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Uw printer bijwerken"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "Wachtrij voor afdruktaken is vol. De printer kan geen nieuwe taken accepteren."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "Wachtrij vol"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Printtaak verzenden"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Printtaak naar printer aan het uploaden."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura heeft materiaalprofielen gedetecteerd die nog niet op de hostprinter van groep {0} zijn geïnstalleerd."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "De materialen worden naar de printer verzonden"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Kan de gegevens niet uploaden naar de printer."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Netwerkfout"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "U probeert verbinding te maken met {0}, maar deze is niet de host van een groep. U kunt de webpagina bezoeken om deze als groephost te configureren."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Geen groephost"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Groep configureren"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1527,66 +296,85 @@ msgstr ""
 "U kunt uw printer <b>{printer_name}</b> via de cloud verbinden.\n"
 " Beheer uw printerwachtrij en controleer uw prints vanaf elke plek door uw printer te verbinden met Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "Bent u klaar voor printen via de cloud?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Aan de slag"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "Meer informatie"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Printen via Cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "U probeert verbinding te maken met een printer waarop Ultimaker Connect niet wordt uitgevoerd. Werk de printer bij naar de nieuwste firmware."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Uw printer bijwerken"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Kan de gegevens niet uploaden naar de printer."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Netwerkfout"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Printen via netwerk"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Printen via Cloud"
+msgid "Print over network"
+msgstr "Printen via netwerk"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Verbonden via Cloud"
+msgid "Connected over the network"
+msgstr "Via het netwerk verbonden"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Printen in de gaten houden"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "morgen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Volg het printen in Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "vandaag"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Onbekende foutcode bij uploaden printtaak: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Verbinding Maken via Netwerk"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nieuwe printer gedetecteerd van uw Ultimaker-account"
 msgstr[1] "Nieuwe printers gedetecteerd van uw Ultimaker-account"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Printer {name} ({model}) toevoegen vanaf uw account"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1594,71 +382,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... en {0} andere"
 msgstr[1] "... en {0} andere"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Printers toegevoegd vanuit Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Een cloudverbinding is niet beschikbaar voor een printer"
 msgstr[1] "Een cloudverbinding is niet beschikbaar voor meerdere printers"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Deze printer is niet gekoppeld aan de Digital Factory:"
 msgstr[1] "Deze printers zijn niet gekoppeld aan de Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Ga naar {website_link} om een verbinding tot stand te brengen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Printerconfiguraties behouden"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Printers verwijderen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} wordt verwijderd tot de volgende accountsynchronisatie."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Bezoek {digital_factory_link} om {printer_name} permanent te verwijderen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Weet u zeker dat u {printer_name} tijdelijk wilt verwijderen?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Printers verwijderen?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1674,7 +462,7 @@ msgstr[1] ""
 "U staat op het punt om {0} printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n"
 "Weet u zeker dat u door wilt gaan?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1683,2079 +471,3124 @@ msgstr ""
 "U staat op het punt om alle printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n"
 "Weet u zeker dat u door wilt gaan?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Gecomprimeerde driehoeksnet openen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Printen via Cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Printen via Cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF-binair"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Verbonden via Cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF-ingesloten JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Printen in de gaten houden"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford-driehoeksformaat"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Volg het printen in Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Gecomprimeerde COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Onbekende foutcode bij uploaden printtaak: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D-modelassistent"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "De gemarkeerde gebieden geven ofwel ontbrekende of ongebruikelijke oppervlakken aan. Corrigeer het model en open het opnieuw in Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Een of meer 3D-modellen worden mogelijk niet optimaal geprint vanwege het modelformaat en de materiaalconfiguratie:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Ontdek hoe u de best mogelijke printkwaliteit en betrouwbaarheid verkrijgt.</p>\n"
+"<p><a href=”https://ultimaker.com/3D-model-assistant”>Handleiding printkwaliteit bekijken</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Als Draadprinten is ingeschakeld, geeft Cura lagen niet goed weer."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Modelfouten"
+msgid "Simulation View"
+msgstr "Simulatieweergave"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Solide weergave"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Er wordt niets weergegeven omdat u eerst moet slicen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Geen lagen om weer te geven"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Dit bericht niet meer weergeven"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Laagweergave"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter ondersteunt geen non-tekstmodus."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Bereid voorafgaand aan het exporteren G-code voor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code-bestand"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Fout bij het schrijven van het 3mf-bestand."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "3MF-schrijverplug-in is beschadigd."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Er is nog geen werkruimte om te schrijven. Voeg eerst een printer toe."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Geen bevoegdheid om de werkruimte hier te schrijven."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "Het besturingssysteem staat niet toe dat u een projectbestand opslaat op deze locatie of met deze bestandsnaam."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "3MF-bestand"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Cura-project 3MF-bestand"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Controleren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Gecomprimeerd G-code-bestand"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "Slicen is mislukt door een onverwachte fout. Overweeg om de fout te melden via onze issue tracker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "Slicen mislukt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Een fout melden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Meld een fout via de issue tracker van Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D-modelassistent"
+msgid "Unable to slice"
+msgstr "Kan niet slicen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Met de huidige instellingen is slicing niet mogelijk. De volgende instellingen bevatten fouten: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Slicing is niet mogelijk vanwege enkele instellingen per model. De volgende instellingen bevatten fouten voor een of meer modellen: {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Slicen is niet mogelijk omdat de terugduwpijler of terugduwpositie(s) ongeldig zijn."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Slicen is niet mogelijk omdat er objecten gekoppeld zijn aan uitgeschakelde Extruder %s."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>Een of meer 3D-modellen worden mogelijk niet optimaal geprint vanwege het modelformaat en de materiaalconfiguratie:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Ontdek hoe u de best mogelijke printkwaliteit en betrouwbaarheid verkrijgt.</p>\n"
-"<p><a href=”https://ultimaker.com/3D-model-assistant”>Handleiding printkwaliteit bekijken</a></p>"
+"Controleer de instellingen en zorg ervoor dat uw modellen:\n"
+"- binnen het werkvolume passen\n"
+"- zijn toegewezen aan een ingeschakelde extruder\n"
+"- niet allemaal zijn ingesteld als modificatierasters"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Rastertype"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Lagen verwerken"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Normaal model"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informatie"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Printen als supportstructuur"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D-bestand"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Instellingen aanpassen voor overlapping"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG-afbeelding"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Supportstructuur niet laten overlappen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG-afbeelding"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Alleen vulraster"
+msgid "PNG Image"
+msgstr "PNG-afbeelding"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Snijdend raster"
+msgid "BMP Image"
+msgstr "BMP-afbeelding"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Instellingen selecteren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF-afbeelding"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Instellingen Selecteren om Dit Model Aan te Passen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Nozzle"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filteren..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Projectbestand <filename>{0}</filename> bevat een onbekend type machine <message>{1}</message>. Kan de machine niet importeren. In plaats daarvan worden er modellen geïmporteerd."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Alles weergeven"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Projectbestand Openen"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura-back-ups"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Projectbestand <filename>{0}</filename> is plotseling ontoegankelijk: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura-versie"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Kan projectbestand niet openen"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Machines"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "Projectbestand <filename>{0}</filename> is corrupt: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materialen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Projectbestand <filename>{0}</filename> wordt gemaakt met behulp van profielen die onbekend zijn bij deze versie van Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profielen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Aanbevolen"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plug-ins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Aangepast"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Wilt u meer?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "3MF-bestand"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Nu back-up maken"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Kan niet naar UFP-bestand schrijven:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Auto back-up"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04-profielen"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Maak elke dag dat Cura wordt gestart, automatisch een back-up."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Back-ups"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Herstellen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Er is een fout opgetreden tijdens het uploaden van uw back-up."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Back-up verwijderen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Uw back-up maken..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Weet u zeker dat u deze back-up wilt verwijderen? Dit kan niet ongedaan worden gemaakt."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Er is een fout opgetreden bij het maken van de back-up."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Back-up herstellen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Uw back-up wordt geüpload..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "U moet Cura opnieuw starten voordat uw back-up wordt hersteld. Wilt u Cura nu sluiten?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Uw back-up is geüpload."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Maak een back-up van uw Cura-instellingen en synchroniseer deze."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "De back-up is groter dan de maximale bestandsgrootte."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Aanmelden"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Back-ups beheren"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Mijn back-ups"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Back-up"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "U hebt momenteel geen back-ups. Gebruik de knop 'Nu back-up maken' om een back-up te maken."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Er is een fout opgetreden tijdens het herstellen van uw back-up."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Tijdens de voorbeeldfase zijn er maximaal 5 back-ups zichtbaar. Verwijder een back-up als u oudere back-ups wilt bekijken."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "Kan het voorbeeldgegevensbestand niet lezen."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Printerinstellingen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter ondersteunt geen tekstmodus."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Breedte)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Nabewerking"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-code wijzigen"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Diepte)"
+msgid "Support Blocker"
+msgstr "Supportblokkering"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Hoogte)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Maak een volume waarin supportstructuren niet worden geprint."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Vorm van het platform"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Voorbeeld"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Centraal oorsprongpunt"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Röntgenweergave"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Verwarmd bed"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Platform kalibreren"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Verwarmde werkvolume"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Upgrades selecteren"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Versie G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Printkopinstellingen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Rijbrughoogte"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Aantal extruders"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Pas extruderoffsets toe op GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "De gemarkeerde gebieden geven ofwel ontbrekende of ongebruikelijke oppervlakken aan. Corrigeer het model en open het opnieuw in Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Start G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Modelfouten"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Eind G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "Meer informatie"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Nozzle-instellingen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Solide weergave"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Maat nozzle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-code parseren"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Compatibele materiaaldiameter"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Details van de G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Nozzle-offset X"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Zorg ervoor dat de G-code geschikt is voor uw printer en de printerconfiguratie voordat u het bestand verzendt. Mogelijk is de weergave van de G-code niet nauwkeurig."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Nozzle-offset Y"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G-bestand"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Nummer van koelventilator"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Machine-instellingen"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Start-G-code van extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB-printen"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Eind-G-code van extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Printen via USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Printer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Via USB Printen"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Firmware bijwerken"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Aangesloten via USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "Firmware is de software die direct op de 3D-printer wordt uitgevoerd. Deze firmware bedient de stappenmotoren, regelt de temperatuur en zorgt er in feite voor dat de printer doet wat deze moet doen."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Er wordt momenteel via USB geprint. Wanneer u Cura afsluit, wordt het printen gestopt. Weet u zeker dat u wilt afsluiten?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Er wordt nog een print afgedrukt. Cura kan pas een nieuwe print via USB starten zodra de vorige print is voltooid."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Bezig met printen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Machines laden..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Voorkeuren instellen..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Actieve machine initialiseren ..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Machinebeheer initialiseren ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Werkvolume initialiseren ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Scene instellen..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Interface laden..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Engine initialiseren ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Er kan slechts één G-code-bestand tegelijkertijd worden geladen. Het importeren van {0} is overgeslagen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Kan geen ander bestand openen als G-code wordt geladen. Het importeren van {0} is overgeslagen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "De firmware die bij nieuwe printers wordt geleverd, werkt wel, maar nieuwe versies hebben vaak meer functies en verbeteringen."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Firmware-upgrade Automatisch Uitvoeren"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visueel"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Aangepaste Firmware Uploaden"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Het visuele profiel is ontworpen om visuele prototypen en modellen te printen met als doel een hoge visuele en oppervlaktekwaliteit te creëren."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "Kan de firmware niet bijwerken omdat er geen verbinding met de printer is."
+msgid "Engineering"
+msgstr "Engineering"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Het engineeringprofiel is ontworpen om functionele prototypen en onderdelen voor eindgebruik te printen met als doel een grotere precisie en nauwere toleranties."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "Kan de firmware niet bijwerken omdat de verbinding met de printer geen ondersteuning biedt voor het uitvoeren van een firmware-upgrade."
+msgid "Draft"
+msgstr "Ontwerp"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Aangepaste firmware selecteren"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Het ontwerpprofiel is ontworpen om initiële prototypen en conceptvalidatie te printen met als doel de printtijd aanzienlijk te verkorten."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Firmware-update"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Niet overschreven"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "De firmware wordt bijgewerkt."
+msgid "Unknown"
+msgstr "Onbekend"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "De firmware-update is voltooid."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Kan de onderstaande printer(s) niet verbinden omdat deze deel uitmaakt/uitmaken van een groep"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Firmware-update mislukt door een onbekende fout."
+msgid "Available networked printers"
+msgstr "Beschikbare netwerkprinters"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Berekend"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Synchroniseer de materiaalprofielen met uw printer voordat u gaat printen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Nieuwe materialen geïnstalleerd"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Firmware-update mislukt door een communicatiefout."
+msgid "Custom Material"
+msgstr "Aangepast materiaal"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Firmware-update mislukt door een invoer-/uitvoerfout."
+msgid "Custom"
+msgstr "Aangepast"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Firmware-update mislukt door ontbrekende firmware."
+msgid "Custom profiles"
+msgstr "Aangepaste profielen"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Project openen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Alle Ondersteunde Typen ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Bestaand(e) bijwerken"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Alle Bestanden (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Nieuw maken"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Kan geen materiaalarchief maken voor synchronisatie met printers."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Samenvatting - Cura-project"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Kan het materiaalarchief niet laden voor synchronisatie met printers."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Printerinstellingen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "Antwoord van Digital Factor is mogelijk beschadigd."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Hoe dient het conflict in de machine te worden opgelost?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "In het antwoord van Digital Factory ontbreekt belangrijke informatie."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Type"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Kan geen verbinding maken met Digital Factory voor de synchronisatie van materialen met enkele printers."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Printergroep"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Kan geen verbinding maken met Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profielinstellingen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Kan geen archief maken van gegevensmap van gebruiker: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Hoe dient het conflict in het profiel te worden opgelost?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Geprobeerd een Cura-back-up te herstellen zonder correcte gegevens of metadata."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Naam"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Geprobeerd een Cura-back-up te herstellen van een versie die hoger is dan de huidige versie."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "De volgende fout is opgetreden bij het herstellen van een Cura-backup:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Niet in profiel"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Nieuwe locatie vinden voor objecten"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 overschrijving"
-msgstr[1] "%1 overschrijvingen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Locatie vinden"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Afgeleide van"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 overschrijving"
-msgstr[1] "%1, %2 overschrijvingen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Kan locatie niet vinden"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Materiaalinstellingen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Inloggen mislukt"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Hoe dient het materiaalconflict te worden opgelost?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Buitenwand"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Zichtbaarheid instellen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Binnenwanden"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modus"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Skin"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Zichtbare instellingen:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Vulling"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 van %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Supportvulling"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Als u een project laadt, worden alle modellen van het platform gewist."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Verbindingsstructuur"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Openen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Supportstructuur"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Plug-in voor Nabewerking"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Skirt"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Scripts voor Nabewerking"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Primepijler"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Een script toevoegen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Beweging"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Intrekkingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Overig(e)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Instellingen"
+msgid "Group #{group_nr}"
+msgstr "Groepsnummer #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Actieve scripts voor nabewerking wijzigen."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "De release notes konden niet worden geopend."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "Het volgende script is actief:"
-msgstr[1] "De volgende scripts zijn actief:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Overslaan"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Afbeelding Converteren..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Sluiten"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "De maximale afstand van elke pixel tot de \"Basis\"."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Toevoegen"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Hoogte (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Voltooien"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "De basishoogte van het platform in millimeters."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Annuleren"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Basis (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Volgende"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "De breedte op het platform in millimeters."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "De hoogte van het bouwvolume is verminderd wegens de waarde van de instelling “Printvolgorde”, om te voorkomen dat de rijbrug tegen geprinte modellen botst."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Breedte (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Werkvolume"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "De diepte op het platform in millimeters"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "Kan materiaalarchief niet opslaan op {}:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Diepte (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Opslaan materiaalarchief mislukt"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Bij lithofanen dienen donkere pixels overeen te komen met de dikkere plekken om meer licht tegen te houden. Bij hoogtekaarten geven lichtere pixels hoger terrein aan. Lichtere pixels dienen daarom overeen te komen met dikkere plekken in het gegenereerde 3D-model."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Onbekende fout."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Donkerder is hoger"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "Het Bestand Bestaat Al"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Lichter is hoger"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Het bestand <filename>{0}</filename> bestaat al. Weet u zeker dat u dit bestand wilt overschrijven?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Voor lithofanen is een eenvoudig logaritmisch model voor doorschijnendheid beschikbaar. Voor hoogtekaarten corresponderen de pixelwaarden lineair met hoogten."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "Ongeldige bestands-URL:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Lineair"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Niet ondersteund"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Doorschijnendheid"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Het percentage licht dat doordringt in een print met een dikte van 1 millimeter. Een lagere waarde verhoogt het contrast in donkere gebieden en verlaagt het contrast in lichte gebieden van de afbeelding."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "De instellingen zijn gewijzigd zodat deze overeenkomen met de huidige beschikbaarheid van extruders:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmissie 1 mm (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "De instellingen zijn bijgewerkt"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "De mate van effening die op de afbeelding moet worden toegepast."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder(s) uitgeschakeld"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Effenen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Kan het profiel niet exporteren als <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Kan het profiel niet exporteren als <filename>{0}</filename>: Plug-in voor de schrijver heeft een fout gerapporteerd."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Selecteer eventuele upgrades die op deze Ultimaker Original zijn uitgevoerd"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Het profiel is geëxporteerd als <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Verwarmd Platform (officiële kit of zelf gebouwd)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "De export is voltooid"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Platform Kalibreren"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Je kan nu je platform afstellen, zodat uw prints er altijd fantastisch uitzien. Als u op 'Naar de volgende positie bewegen' klikt, beweegt de nozzle naar de verschillende instelbare posities."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Kan het profiel niet importeren uit <filename>{0}</filename> voordat een printer toegevoegd is."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Voor elke positie legt u een stukje papier onder de nozzle en past u de hoogte van het printplatform aan. De hoogte van het printplatform is goed wanneer het papier net door de punt van de nozzle wordt meegenomen."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Er is geen aangepast profiel om in het bestand <filename>{0}</filename> te importeren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Kalibratie Platform Starten"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Beweeg Naar de Volgende Positie"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Dit profiel <filename>{0}</filename> bevat incorrecte gegevens. Kan het profiel niet importeren."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Meer informatie over anonieme gegevensverzameling"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren. Hieronder ziet u een voorbeeld van alle gegevens die worden gedeeld:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "Het profiel {0} is geïmporteerd."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Ik wil geen anonieme gegevens verzenden"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "Het bestand {0} bevat geen geldig profiel."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Verzenden van anonieme gegevens toestaan"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Het profiel {0} heeft een onbekend bestandstype of is beschadigd."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marktplaats"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Aangepast profiel"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "U moet Cura opnieuw starten voordat wijzigingen in packages van kracht worden."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Er ontbreekt een kwaliteitstype in het profiel."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Sluit %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Er is nog geen actieve printer."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Installeren"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "Kan het profiel niet toevoegen."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Geïnstalleerd"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "Kwaliteitstype '{0}' is niet compatibel met de huidige actieve machinedefinitie '{1}'."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Waarschuwing: het profiel is niet zichtbaar omdat het kwaliteitstype '{0}' van het profiel niet beschikbaar is voor de huidige configuratie. Schakel naar een materiaal-nozzle-combinatie waarvoor dit kwaliteitstype geschikt is."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Ga naar Marketplace op internet"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Objecten verveelvoudigen en plaatsen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Materialen zoeken"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Objecten plaatsen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibiliteit"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Object plaatsen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Machine"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Er kan geen nieuw aanmeldingsproces worden gestart. Controleer of een andere aanmeldingspoging nog actief is."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Platform"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Kan de Ultimaker-accountserver niet bereiken."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Supportstructuur"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "Aanmelden mislukt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Kwaliteit"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Kan het antwoord niet lezen."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Technisch informatieblad"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "De opgegeven status is niet juist."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Veiligheidsinformatieblad"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Time-out tijdens verificatie bij de accountserver."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Richtlijnen voor printen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Verleen de vereiste toestemmingen toe bij het autoriseren van deze toepassing."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Website"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Er heeft een onverwachte gebeurtenis plaatsgevonden bij het aanmelden. Probeer het opnieuw."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Aanmelden</a> is vereist voor installeren of bijwerken"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura kan niet worden gestart"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Materiaalspoelen kopen</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Oeps, Ultimaker Cura heeft een probleem gedetecteerd.</p></b>\n"
+"                    <p>Tijdens het opstarten is een onherstelbare fout opgetreden. Deze fout is mogelijk veroorzaakt door enkele onjuiste configuratiebestanden. Het wordt aanbevolen een back-up te maken en de standaardinstelling van uw configuratie te herstellen.</p>\n"
+"                    <p>Back-ups bevinden zich in de configuratiemap.</p>\n"
+"                    <p>Stuur ons dit crashrapport om het probleem op te lossen.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Bijwerken"
+msgid "Send crash report to Ultimaker"
+msgstr "Het crashrapport naar Ultimaker verzenden"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Bijwerken"
+msgid "Show detailed crash report"
+msgstr "Gedetailleerd crashrapport weergeven"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Bijgewerkt"
+msgid "Show configuration folder"
+msgstr "Open Configuratiemap"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Terug"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plug-ins"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materialen"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Geïnstalleerd"
+msgid "Backup and Reset Configuration"
+msgstr "Back-up maken en herstellen van configuratie"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Wordt geïnstalleerd na opnieuw starten"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Crashrapport"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Aanmelden</a> is vereist voor het bijwerken"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Er is een fatale fout opgetreden in Cura. Stuur ons het crashrapport om het probleem op te lossen</p></b>\n"
+"            <p>Druk op de knop \"Rapport verzenden\" om het foutenrapport automatisch naar onze servers te verzenden</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgraden"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Systeeminformatie"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "De-installeren"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Onbekend"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Community-bijdragen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Cura-versie"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Community-plug-ins"
+msgid "Cura language"
+msgstr "Taal van Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Standaard materialen"
+msgid "OS language"
+msgstr "Taal van besturingssysteem"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Packages ophalen..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Platform"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Website"
+msgid "Qt version"
+msgstr "Qt version"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "PyQt version"
+msgstr "PyQt version"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Meld u aan voor geverifieerde plug-ins en materialen voor Ultimaker Cura Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Versie"
+msgid "Not yet initialized<br/>"
+msgstr "Nog niet geïnitialiseerd<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Laatst bijgewerkt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGL-versie: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Merk"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL-leverancier: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Downloads"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL-renderer: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Geïnstalleerde plug-ins"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Traceback van fout"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Er zijn geen plug-ins geïnstalleerd."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Logboeken"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Geïnstalleerde materialen"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Rapport verzenden"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Er zijn materialen geïnstalleerd."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Controleer of de printer verbonden is:\n"
+"- Controleer of de printer ingeschakeld is.\n"
+"- Controleer of de printer verbonden is met het netwerk.\n"
+"- Controleer of u bent aangemeld om met de cloud verbonden printers te detecteren."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Gebundelde plug-ins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Verbind uw printer met het netwerk."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Gebundelde materialen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Gebruikershandleidingen online weergegeven"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Kan geen verbinding maken met de Cura Package-database. Controleer uw verbinding."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Sluit de printer aan om uw printopdracht vanuit Cura te volgen."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "U moet de licentie accepteren om de package te installeren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Instellingen Selecteren om Dit Model Aan te Passen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Wijzigingen van uw account"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filteren..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Verwijderen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Alles weergeven"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Volgende"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Rastertype"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "De volgende packages worden toegevoegd:"
+msgid "Normal model"
+msgstr "Normaal model"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "De volgende packages kunnen niet worden geïnstalleerd omdat de Cura-versie niet compatibel is:"
+msgid "Print as support"
+msgstr "Printen als supportstructuur"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "De-installeren bevestigen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Instellingen aanpassen voor overlapping"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "U verwijdert materialen en/of profielen die nog in gebruik zijn. Wanneer u het verwijderen bevestigt, worden de volgende materialen/profielen teruggezet naar hun standaardinstellingen."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "Supportstructuur niet laten overlappen"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materialen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Alleen vulraster"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profielen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Snijdend raster"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Bevestigen"
+msgid "Select settings"
+msgstr "Instellingen selecteren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Firmware bijwerken"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Kleurenschema"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "Firmware is de software die direct op de 3D-printer wordt uitgevoerd. Deze firmware bedient de stappenmotoren, regelt de temperatuur en zorgt er in feite voor dat de printer doet wat deze moet doen."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Materiaalkleur"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "De firmware die bij nieuwe printers wordt geleverd, werkt wel, maar nieuwe versies hebben vaak meer functies en verbeteringen."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Lijntype"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Firmware-upgrade Automatisch Uitvoeren"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Snelheid"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Aangepaste Firmware Uploaden"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Laagdikte"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "Kan de firmware niet bijwerken omdat er geen verbinding met de printer is."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Lijnbreedte"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "Kan de firmware niet bijwerken omdat de verbinding met de printer geen ondersteuning biedt voor het uitvoeren van een firmware-upgrade."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Doorvoer"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Aangepaste firmware selecteren"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Compatibiliteitsmodus"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Firmware-update"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Bewegingen"
+msgid "Updating firmware."
+msgstr "De firmware wordt bijgewerkt."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Helpers"
+msgid "Firmware update completed."
+msgstr "De firmware-update is voltooid."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Shell"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Firmware-update mislukt door een onbekende fout."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Vulling"
+msgid "Firmware update failed due to an communication error."
+msgstr "Firmware-update mislukt door een communicatiefout."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "Wordt gestart"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Firmware-update mislukt door een invoer-/uitvoerfout."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Alleen bovenlagen weergegeven"
+msgid "Firmware update failed due to missing firmware."
+msgstr "Firmware-update mislukt door ontbrekende firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "5 gedetailleerde lagen bovenaan weergeven"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Afgebroken"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Boven-/onderkant"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Gereed"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Binnenwand"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Voorbereiden..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Afbreken..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "max"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Mislukt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Pauzeren..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Gepauzeerd"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Hervatten..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Handeling nodig"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Voltooit %1 om %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Printer beheren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Glas"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Werk de firmware van uw printer bij om de wachtrij op afstand te beheren."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Vanuit Ultimaker Cura kunt u de webcamfeeds voor cloudprinters niet bekijken. Klik op 'Printer beheren' om Ultimaker Digital Factory te bezoeken en deze webcam te bekijken."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Laden..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Niet beschikbaar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Onbereikbaar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Inactief"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Voorbereiden..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Printen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Zonder titel"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anoniem"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Hiervoor zijn configuratiewijzigingen vereist"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Details"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Niet‑beschikbare printer"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Eerst beschikbaar"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "In wachtrij"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Beheren in browser"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Er staan geen afdruktaken in de wachtrij. Slice een taak en verzend deze om er een toe te voegen."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Printtaken"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Totale printtijd"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Wachten op"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Printen via netwerk"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Printen"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Printerselectie"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Configuratiewijzigingen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Overschrijven"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "Voor de toegewezen printer, %1, is de volgende configuratiewijziging vereist:"
 msgstr[1] "Voor de toegewezen printer, %1, zijn de volgende configuratiewijzigingen vereist:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "De printer %1 is toegewezen. De taak bevat echter een onbekende materiaalconfiguratie."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Wijzig het materiaal %1 van %2 in %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "Laad %3 als materiaal %1 (kan niet worden overschreven)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Wijzig de print core %1 van %2 in %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Wijzig het platform naar %1 (kan niet worden overschreven)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Met het overschrijven worden de opgegeven instellingen gebruikt met de bestaande printerconfiguratie. De print kan hierdoor mislukken."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Aluminium"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Gereed"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Afbreken..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Afgebroken"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Mislukt"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Pauzeren..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Gepauzeerd"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Hervatten..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Printen via netwerk"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Handeling nodig"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Printen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Voltooit %1 om %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Printerselectie"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Verbinding Maken met Printer in het Netwerk"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Als u rechtstreeks via het netwerk wilt printen naar de printer, moet u ervoor zorgen dat de printer met een netwerkkabel is verbonden met het netwerk of moet u verbinding maken met de printer via het wifi-netwerk. Als u geen verbinding maakt tussen Cura en de printer, kunt u een USB-station gebruiken om G-code-bestanden naar de printer over te zetten."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Selecteer uw printer in de onderstaande lijst:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Bewerken"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Verwijderen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Vernieuwen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Raadpleeg de <a href='%1'>handleiding voor probleemoplossing bij printen via het netwerk</a> als uw printer niet in de lijst wordt vermeld"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Type"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Firmwareversie"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adres"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Deze printer is niet ingesteld voor het hosten van een groep printers."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Deze printer is de host voor een groep van %1 printers."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "De printer op dit adres heeft nog niet gereageerd."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Verbinden"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Ongeldig IP-adres"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Voer een geldig IP-adres in."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Printeradres"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Voer het IP-adres van uw printer in het netwerk in."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Niet‑beschikbare printer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "Eerst beschikbaar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Plaats bovenaan"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Verwijderen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Hervatten"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Pauzeren..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Hervatten..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pauzeren"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Afbreken..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Afbreken"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Weet u zeker dat u %1 bovenaan de wachtrij wilt plaatsen?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Plaats printtaak bovenaan"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Weet u zeker dat u %1 wilt verwijderen?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Printtaak verwijderen"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Weet u zeker dat u %1 wilt afbreken?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Printen afbreken"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "In wachtrij"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Beheren in browser"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Er staan geen afdruktaken in de wachtrij. Slice een taak en verzend deze om er een toe te voegen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Printtaken"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Totale printtijd"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Wachten op"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Kleurenschema"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Materiaalkleur"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Lijntype"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Snelheid"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Laagdikte"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Lijnbreedte"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Doorvoer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Compatibiliteitsmodus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Bewegingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Helpers"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Shell"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Vulling"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "Wordt gestart"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Alleen bovenlagen weergegeven"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "5 gedetailleerde lagen bovenaan weergeven"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Boven-/onderkant"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Binnenwand"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "min"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "max"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Controleer of de printer verbonden is:\n"
-"- Controleer of de printer ingeschakeld is.\n"
-"- Controleer of de printer verbonden is met het netwerk.\n"
-"- Controleer of u bent aangemeld om met de cloud verbonden printers te detecteren."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Verbind uw printer met het netwerk."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Hoogte (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Gebruikershandleidingen online weergegeven"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "De maximale afstand van elke pixel tot de \"Basis\"."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Sluit de printer aan om uw printopdracht vanuit Cura te volgen."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Basis (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "In deze print kunnen problemen ontstaan. Klik om tips voor aanpassingen te bekijken."
+msgid "The base height from the build plate in millimeters."
+msgstr "De basishoogte van het platform in millimeters."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Breedte (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D-weergave"
+msgid "The width in millimeters on the build plate"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Diepte (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Weergave voorzijde"
+msgid "The depth in millimeters on the build plate"
+msgstr "De diepte op het platform in millimeters"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Donkerder is hoger"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Lichter is hoger"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Weergave bovenzijde"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Bij lithofanen dienen donkere pixels overeen te komen met de dikkere plekken om meer licht tegen te houden. Bij hoogtekaarten geven lichtere pixels hoger terrein aan. Lichtere pixels dienen daarom overeen te komen met dikkere plekken in het gegenereerde 3D-model."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Lineair"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Doorschijnendheid"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Linkeraanzicht"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Voor lithofanen is een eenvoudig logaritmisch model voor doorschijnendheid beschikbaar. Voor hoogtekaarten corresponderen de pixelwaarden lineair met hoogten."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmissie 1 mm (%)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Rechteraanzicht"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Het percentage licht dat doordringt in een print met een dikte van 1 millimeter. Een lagere waarde verhoogt het contrast in donkere gebieden en verlaagt het contrast in lichte gebieden van de afbeelding."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Lijst met objecten"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Effenen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "De mate van effening die op de afbeelding moet worden toegepast."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marktplaats"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Bestand"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Project openen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "B&ewerken"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Bestaand(e) bijwerken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "Beel&d"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Nieuw maken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "In&stellingen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Samenvatting - Cura-project"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensies"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Hoe dient het conflict in de machine te worden opgelost?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Voo&rkeuren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Printerinstellingen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Help"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Type"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nieuw project"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Printergroep"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Weet u zeker dat u een nieuw project wilt starten? Hiermee wordt het platform leeggemaakt en worden eventuele niet-opgeslagen instellingen verwijderd."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Hoe dient het conflict in het profiel te worden opgelost?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Slicen..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profielinstellingen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Kan niet slicen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Naam"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Niet in profiel"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 overschrijving"
+msgstr[1] "%1 overschrijvingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Afgeleide van"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 overschrijving"
+msgstr[1] "%1, %2 overschrijvingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Hoe dient het materiaalconflict te worden opgelost?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Materiaalinstellingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Zichtbaarheid instellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modus"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Zichtbare instellingen:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 van %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Als u een project laadt, worden alle modellen van het platform gewist."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Openen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Verwerken"
+msgid "Want more?"
+msgstr "Wilt u meer?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Slicen"
+msgid "Backup Now"
+msgstr "Nu back-up maken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Het sliceproces starten"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Auto back-up"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Annuleren"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Maak elke dag dat Cura wordt gestart, automatisch een back-up."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Tijdschatting"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura-versie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Materiaalschatting"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Machines"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materialen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profielen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Geen tijdschatting beschikbaar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plug-ins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Geen kostenraming beschikbaar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Herstellen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Back-up verwijderen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Weet u zeker dat u deze back-up wilt verwijderen? Dit kan niet ongedaan worden gemaakt."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Back-up herstellen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "U moet Cura opnieuw starten voordat uw back-up wordt hersteld. Wilt u Cura nu sluiten?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Maak een back-up van uw Cura-instellingen en synchroniseer deze."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Voorbeeld"
+msgid "Sign in"
+msgstr "Aanmelden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Een printer toevoegen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Mijn back-ups"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "U hebt momenteel geen back-ups. Gebruik de knop 'Nu back-up maken' om een back-up te maken."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Tijdens de voorbeeldfase zijn er maximaal 5 back-ups zichtbaar. Verwijder een back-up als u oudere back-ups wilt bekijken."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura-back-ups"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Meer informatie over anonieme gegevensverzameling"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren. Hieronder ziet u een voorbeeld van alle gegevens die worden gedeeld:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Ik wil geen anonieme gegevens verzenden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Verzenden van anonieme gegevens toestaan"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Plug-in voor Nabewerking"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Een netwerkprinter toevoegen"
+msgid "Post Processing Scripts"
+msgstr "Scripts voor Nabewerking"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Een script toevoegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Een niet-netwerkprinter toevoegen"
+msgid "Settings"
+msgstr "Instellingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Actieve scripts voor nabewerking wijzigen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "Het volgende script is actief:"
+msgstr[1] "De volgende scripts zijn actief:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Een cloudprinter toevoegen"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Selecteer eventuele upgrades die op deze Ultimaker Original zijn uitgevoerd"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Wachten op cloudreactie"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Verwarmd Platform (officiële kit of zelf gebouwd)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Platform Kalibreren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Geen printers gevonden in uw account?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Je kan nu je platform afstellen, zodat uw prints er altijd fantastisch uitzien. Als u op 'Naar de volgende positie bewegen' klikt, beweegt de nozzle naar de verschillende instelbare posities."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "De volgende printers in uw account zijn toegevoegd in Cura:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Voor elke positie legt u een stukje papier onder de nozzle en past u de hoogte van het printplatform aan. De hoogte van het printplatform is goed wanneer het papier net door de punt van de nozzle wordt meegenomen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Kalibratie Platform Starten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Beweeg Naar de Volgende Positie"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Printer handmatig toevoegen"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Een printer toevoegen op IP-adres"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Voer het IP-adres van uw printer in."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Toevoegen"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Kan geen verbinding maken met het apparaat."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Sluit %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Kunt u geen verbinding maken met uw Ultimaker-printer?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "De printer op dit adres heeft nog niet gereageerd."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Kan de printer niet toevoegen omdat het een onbekende printer is of omdat het niet de host in een groep is."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Terug"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Verbinding maken"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Gebruikersovereenkomst"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Afwijzen en sluiten"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Welkom bij Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"Volg deze stappen voor het instellen van\n"
-"Ultimaker Cura. Dit duurt slechts even."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Aan de slag"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Meld u aan op het Ultimaker-platform"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Voeg materiaalinstellingen en plugins uit de Marktplaats toe"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Maak een back-up van uw materiaalinstellingen en plug-ins en synchroniseer deze"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Deel ideeën met 48,000+ gebruikers in de Ultimaker Community of vraag hen om ondersteuning"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Overslaan"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Nee, ik ga niet akkoord"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Maak een gratis Ultimaker-account aan"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Printer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Nozzle-instellingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabrikant"
+msgid "Nozzle size"
+msgstr "Maat nozzle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Profieleigenaar"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Printernaam"
+msgid "Compatible material diameter"
+msgstr "Compatibele materiaaldiameter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Geef uw printer een naam"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Nozzle-offset X"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Kan in uw netwerk geen printer vinden."
+msgid "Nozzle offset Y"
+msgstr "Nozzle-offset Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Vernieuwen"
+msgid "Cooling Fan Number"
+msgstr "Nummer van koelventilator"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Start-G-code van extruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Eind-G-code van extruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Printerinstellingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Printer toevoegen op IP"
+msgid "X (Width)"
+msgstr "X (Breedte)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Een cloudprinter toevoegen"
+msgid "Y (Depth)"
+msgstr "Y (Diepte)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Probleemoplossing"
+msgid "Z (Height)"
+msgstr "Z (Hoogte)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Help ons Ultimaker Cura te verbeteren"
+msgid "Build plate shape"
+msgstr "Vorm van het platform"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren, waaronder:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Centraal oorsprongpunt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Machinetypen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Verwarmd bed"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Materiaalgebruik"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Verwarmde werkvolume"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Aantal slices"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Versie G-code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Instellingen voor printen"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Printkopinstellingen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "De gegevens die Ultimaker Cura verzamelt, bevatten geen persoonlijke informatie."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Meer informatie"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "Nieuwe functies"
+msgid "X max"
+msgstr "X max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Leeg"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Release notes"
+msgid "Gantry Height"
+msgstr "Rijbrughoogte"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Aantal extruders"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Pas extruderoffsets toe op GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Start G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Eind G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "Mijn printers"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Volg uw printers in Ultimaker Digital Factory."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Maak printprojecten aan in Digital Library."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Printtaken"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Volg printtaken en print opnieuw vanuit uw printgeschiedenis."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Breid Ultimaker Cura uit met plug-ins en materiaalprofielen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Word een 3D-printexpert met Ultimaker e-learning."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Ondersteuning van Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Leer hoe u aan de slag gaat met Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Stel een vraag"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Consulteer de Ultimaker Community."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Een fout melden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Laat ontwikkelaars weten dat er iets misgaat."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Bezoek de Ultimaker-website."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Geselecteerd model printen met %1"
+msgstr[1] "Geselecteerde modellen printen met %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "In&stellingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nieuw project"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Weet u zeker dat u een nieuw project wilt starten? Hiermee wordt het platform leeggemaakt en worden eventuele niet-opgeslagen instellingen verwijderd."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marktplaats"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Platform"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "De doeltemperatuur van het verwarmde bed. Het bed wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van het bed uitgeschakeld."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "De huidige temperatuur van het verwarmde bed."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "De temperatuur waarnaar het bed moet worden voorverwarmd."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Annuleren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Voorverwarmen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Verwarm het bed voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het bed wordt verwarmd. Zo hoeft u niet te wachten totdat het bed opgewarmd is wanneer u gereed bent om te printen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "Er is geen verbinding met de printer."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Printerbediening"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Jog-positie"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Jog-afstand"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "G-code verzenden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Verzend een aangepaste G-code-opdracht naar de verbonden printer. Druk op Enter om de opdracht te verzenden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Extruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "De doeltemperatuur van de hot-end. De hot-end wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van de hot-end uitgeschakeld."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "De huidige temperatuur van dit hotend."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "De temperatuur waarnaar het hotend moet worden voorverwarmd."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Verwarm het hotend voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het hotend wordt verwarmd. Zo hoeft u niet te wachten totdat het hotend is opgewarmd wanneer u gereed bent om te printen."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "De kleur van het materiaal in deze extruder."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Het materiaal in deze extruder."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "De nozzle die in deze extruder geplaatst is."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Projectbestand openen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Dit is een Cura-projectbestand. Wilt u dit openen als project of de modellen eruit importeren?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Mijn keuze onthouden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Openen als project"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modellen importeren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Project opslaan"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Extruder %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 &materiaal"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Materiaal"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Bij opnieuw opslaan projectsamenvatting niet weergeven"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Opslaan"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Bestand(en) openen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Binnen de door u geselecteerde bestanden zijn een of meer projectbestanden aangetroffen. U kunt slechts één projectbestand tegelijk openen. Het wordt aangeraden alleen modellen uit deze bestanden te importeren. Wilt u verdergaan?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Allemaal als model importeren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Ongeveer %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versie: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "End-to-end-oplossing voor fused filament 3D-printen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3764,2227 +3597,2385 @@ msgstr ""
 "Cura is ontwikkeld door Ultimaker B.V. in samenwerking met de community.\n"
 "Cura maakt met trots gebruik van de volgende opensourceprojecten:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafische gebruikersinterface (GUI)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Toepassingskader"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code-generator"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "InterProcess Communication-bibliotheek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programmeertaal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI-kader"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Bindingen met GUI-kader"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Bindingenbibliotheek C/C++"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Indeling voor gegevensuitwisseling"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Ondersteuningsbibliotheek voor wetenschappelijke berekeningen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Ondersteuningsbibliotheek voor snellere berekeningen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van STL-bestanden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Ondersteuningsbibliotheek voor het verwerken van tweedimensionale objecten"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van driehoekig rasters"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van 3MF-bestanden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Ondersteuningsbibliotheek voor bestandsmetadata en streaming"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Seriële-communicatiebibliotheek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf-detectiebibliotheek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Bibliotheek met veelhoeken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Statische typecontrole voor Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Rootcertificaten voor het valideren van SSL-betrouwbaarheid"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python fouttraceringsbibliotheek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Verpakkingsbibliotheek met veelhoeken, ontwikkeld door Prusa Research"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Pythonbindingen voor libnest2d"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Ondersteuningsbibliotheek voor toegang tot systeemkeyring"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Pythonextensies voor Microsoft Windows"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Lettertype"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG-pictogrammen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Implementatie van Linux-toepassing voor kruisdistributie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Bestand(en) openen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Binnen de door u geselecteerde bestanden zijn een of meer projectbestanden aangetroffen. U kunt slechts één projectbestand tegelijk openen. Het wordt aangeraden alleen modellen uit deze bestanden te importeren. Wilt u verdergaan?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Allemaal als model importeren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Project opslaan"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Extruder %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 &materiaal"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Materiaal"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Bij opnieuw opslaan projectsamenvatting niet weergeven"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Opslaan"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Wijzigingen verwijderen of behouden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"U hebt enkele profielinstellingen aangepast.\n"
-"Wilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\n"
-"U kunt de wijzigingen ook verwijderen om de standaardinstellingen van '%1' te laden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Profielinstellingen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Huidige wijzigingen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Altijd vragen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Verwijderen en nooit meer vragen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Behouden en nooit meer vragen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Wijzigingen verwijderen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Wijzigingen behouden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Projectbestand openen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "Geen items om uit te kiezen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Dit is een Cura-projectbestand. Wilt u dit openen als project of de modellen eruit importeren?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Bestand(en) openen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Mijn keuze onthouden"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "&Recente bestanden openen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Openen als project"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Zichtbare instellingen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modellen importeren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Alle categorieën samenvouwen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Instelling voor zichtbaarheid beheren..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiaal"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Instellen als Actieve Extruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Extruder inschakelen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Extruder uitschakelen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiaal"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favorieten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Standaard"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Help"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Bestand"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Project opslaan..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exporteren..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Selectie Exporteren..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Voo&rkeuren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "B&ewerken"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Printer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Netwerkprinters"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Lokale printers"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensies"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configuraties"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Actieve print"
+msgid "Loading available configurations from the printer..."
+msgstr "Beschikbare configuraties laden vanaf de printer..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Taaknaam"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "De configuraties zijn niet beschikbaar omdat de printer niet verbonden is."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Printtijd"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Deze configuratie is niet beschikbaar omdat %1 niet wordt herkend. Ga naar %2 om het juiste materiaalprofiel te downloaden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Geschatte resterende tijd"
+msgid "Marketplace"
+msgstr "Marktplaats"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "De cloudprinter is offline. Controleer of de printer is ingeschakeld en verbonden is met internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "De configuratie van deze extruder is niet toegestaan en verhindert slicen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Deze printer is niet gekoppeld aan uw account. Ga naar de Ultimaker Digital Factory om een verbinding tot stand te brengen."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "Er zijn geen profielen die compatibel zijn met de configuratie van deze extruder."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "De cloudverbinding is momenteel niet beschikbaar. Log in om verbinding te maken met de cloudprinter."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Configuratie selecteren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "De cloudverbinding is momenteel niet beschikbaar. Controleer uw internetverbinding."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configuraties"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Printer toevoegen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Aangepast"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Printers beheren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Printer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Verbonden printers"
+msgid "Enabled"
+msgstr "Ingeschakeld"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Vooraf ingestelde printers"
+msgid "Material"
+msgstr "Materiaal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Instellingen voor printen"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Gebruik lijm bij deze combinatie van materialen voor een betere hechting."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "De printinstelling is uitgeschakeld. Het G-code-bestand kan niet worden gewijzigd."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Geselecteerd model printen met:"
+msgstr[1] "Geselecteerde modellen printen met:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Geselecteerd model verveelvoudigen"
+msgstr[1] "Geselecteerde modellen verveelvoudigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profiel"
+msgid "Number of Copies"
+msgstr "Aantal exemplaren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Project opslaan..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "Beel&d"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Camerapositie"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Camerabeeld"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspectief"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Orthografisch"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Type weergeven"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Meld u aan op het Ultimaker-platform"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Sommige waarden of aanpassingen van instellingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n"
-"\n"
-"Klik om het profielbeheer te openen."
+"- Voeg materiaalprofielen en plug-ins toe uit de Marktplaats\n"
+"- Maak back-ups van uw materiaalprofielen en plug-ins en synchroniseer deze\n"
+"- Deel ideeën met 48.000+ gebruikers in de Ultimaker-community of vraag hen om ondersteuning"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Aangepaste profielen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Maak een gratis Ultimaker-account aan"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Huidige wijzigingen verwijderen"
+msgid "Sign in"
+msgstr "Aanmelden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Laatste update: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Aanbevolen"
+msgid "Ultimaker Account"
+msgstr "Ultimaker-account"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Aangepast"
+msgid "Sign Out"
+msgstr "Afmelden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Aan het controleren..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Account gesynchroniseerd"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Er is een fout opgetreden..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Updates in afwachting installeren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Controleren op accountupdates"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Slicen..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Kan niet slicen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Verwerken"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Slicen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Het sliceproces starten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Annuleren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Tijdschatting"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Materiaalschatting"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Geen tijdschatting beschikbaar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Geen kostenraming beschikbaar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Voorbeeld"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Dit package wordt na opnieuw starten geïnstalleerd."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Algemeen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Instellingen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Printers"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materialen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profielen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1 wordt gesloten"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Weet u zeker dat u %1 wilt afsluiten?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Package installeren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Bestand(en) openen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Binnen de door u geselecteerde bestanden zijn een of meer G-code-bestanden aangetroffen. U kunt maximaal één G-code-bestand tegelijk openen. Selecteer maximaal één bestand als u dit wilt openen als G-code-bestand."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Printer Toevoegen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Nieuwe functies"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Aan"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Uit"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Experimenteel"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Instellingen voor printen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "De printinstelling is uitgeschakeld. Het G-code-bestand kan niet worden gewijzigd."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Aanbevolen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Aangepast"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "Er is geen %1 profiel voor de configuratie in extruder %2. In plaats daarvan wordt de standaardintentie gebruikt"
 msgstr[1] "Er is geen %1 profiel voor de configuraties in extruders %2. In plaats daarvan wordt de standaardintentie gebruikt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profielen"
+msgid "Gradual infill"
+msgstr "Geleidelijke vulling"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "U hebt enkele profielinstellingen aangepast. Ga naar de aangepaste modus als u deze wilt wijzigen."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Met geleidelijke vulling neemt de hoeveelheid vulling naar boven toe."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Supportstructuur"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Genereer structuren om delen van het model met overhang te ondersteunen. Zonder deze structuren zakken dergelijke delen in tijdens het printen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Geleidelijke vulling"
+msgid "Profiles"
+msgstr "Profielen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Met geleidelijke vulling neemt de hoeveelheid vulling naar boven toe."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "U hebt enkele profielinstellingen aangepast. Ga naar de aangepaste modus als u deze wilt wijzigen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Hechting"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Het printen van een brim of raft inschakelen. Deze optie zorgt ervoor dat er extra materiaal rondom of onder het object wordt neergelegd, dat er naderhand eenvoudig kan worden afgesneden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Project opslaan..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Aangepaste profielen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Netwerkprinters"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Huidige wijzigingen verwijderen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Lokale printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profiel"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiaal"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Sommige waarden of aanpassingen van instellingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n"
+"\n"
+"Klik om het profielbeheer te openen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favorieten"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Instelling"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Standaard"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profiel"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Geselecteerd model printen met:"
-msgstr[1] "Geselecteerde modellen printen met:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Huidig"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Geselecteerd model verveelvoudigen"
-msgstr[1] "Geselecteerde modellen verveelvoudigen"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Aantal exemplaren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Project opslaan..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exporteren..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Selectie Exporteren..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Zichtbaarheid Instellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configuraties"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Aangepast"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Alles aanvinken"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Activeren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Hernoemen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Diameterwijziging bevestigen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Het nieuwe filament is ingesteld op %1 mm. Dit is niet compatibel met de huidige extruder. Wilt u verder gaan?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Printer"
+msgid "Display Name"
+msgstr "Naam"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Ingeschakeld"
+msgid "Brand"
+msgstr "Merk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiaal"
+msgid "Material Type"
+msgstr "Type Materiaal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Gebruik lijm bij deze combinatie van materialen voor een betere hechting."
+msgid "Color"
+msgstr "Kleur"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "De configuratie van deze extruder is niet toegestaan en verhindert slicen."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "Er zijn geen profielen die compatibel zijn met de configuratie van deze extruder."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Eigenschappen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Configuratie selecteren"
+msgid "Density"
+msgstr "Dichtheid"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configuraties"
+msgid "Diameter"
+msgstr "Diameter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Beschikbare configuraties laden vanaf de printer..."
+msgid "Filament Cost"
+msgstr "Kostprijs Filament"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "De configuraties zijn niet beschikbaar omdat de printer niet verbonden is."
+msgid "Filament weight"
+msgstr "Gewicht filament"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Deze configuratie is niet beschikbaar omdat %1 niet wordt herkend. Ga naar %2 om het juiste materiaalprofiel te downloaden."
+msgid "Filament length"
+msgstr "Lengte filament"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marktplaats"
+msgid "Cost per Meter"
+msgstr "Kostprijs per meter"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Bestand(en) openen..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Dit materiaal is gekoppeld aan %1 en deelt hiermee enkele eigenschappen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Materiaal ontkoppelen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiaal"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Beschrijving"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Instellen als Actieve Extruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Gegevens Hechting"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Extruder inschakelen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Informatie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Extruder uitschakelen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Synchroniseer materialen met printers"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "&Recente bestanden openen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Synchroniseer materialen met printers"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Zichtbare instellingen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "Met een paar simpele stappen kunt u al uw materiaalprofielen synchroniseren met uw printers."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Alle categorieën samenvouwen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "Waarom moet ik materiaalprofielen synchroniseren?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Instelling voor zichtbaarheid beheren..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Starten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Camerapositie"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Aanmelden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Camerabeeld"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Om de materiaalprofielen automatisch te synchroniseren met alle printers die op Digital Factory zijn aangesloten, moet u zich aanmelden bij Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspectief"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Materialen synchroniseren met USB"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Orthografisch"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "De volgende printers ontvangen de nieuwe materiaalprofielen:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Platform"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "Er is iets misgegaan bij het verzenden van de materialen naar de printers."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Type weergeven"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "Materiaalprofielen zijn gesynchroniseerd met de volgende printers:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Is geprint als support."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Probleemoplossing"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Andere modellen die met dit model overlappen, zijn gewijzigd."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "Ontbreken er printers?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "De vulling die met dit model overlapt, is aangepast."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Controleer of alle printers zijn ingeschakeld en zijn aangesloten op Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Overlappingen worden in dit model niet ondersteund."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Lijst vernieuwen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Overschrijft %1 instelling."
-msgstr[1] "Overschrijft %1 instellingen."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Probeer het opnieuw"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profielen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Klaar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Activeren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Synchroniseren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Maken"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "Synchroniseren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "Geen printers gevonden"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Mogelijk zijn er geen compatibele printers op Digital Factory aangesloten. Controleer of de printer is aangesloten en de nieuwste firmware op de printer is geïnstalleerd."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Meer informatie over het aansluiten van de printer op Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Vernieuwen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Materiaalprofielen synchroniseren via USB"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Volg onderstaande stappen om nieuwe materiaalprofielen op uw printer te laden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Klik op de knop Materiaalarchief exporteren."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "Bewaar het .umm-bestand op een USB-stick."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "Steek de USB-stick in de printer en start de procedure om nieuwe materiaalprofielen te laden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Hoe u nieuwe materiaalprofielen laadt op Mijn printer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Terug"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Materiaalarchief exporteren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Alle materialen exporteren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Dupliceren"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Hernoemen"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Importeren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Exporteren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profiel Maken"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Geef een naam op voor dit profiel."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Dupliceren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profiel Dupliceren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exporteren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Verwijderen Bevestigen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Weet u zeker dat u %1 wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profiel Hernoemen"
+msgid "Import Material"
+msgstr "Materiaal Importeren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profiel Importeren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Materiaal <filename>%1</filename> is geïmporteerd"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Kon materiaal <filename>%1</filename> niet importeren: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profiel Exporteren"
+msgid "Export Material"
+msgstr "Materiaal Exporteren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Exporteren van materiaal naar <filename>%1</filename> is mislukt: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Materiaal is geëxporteerd naar <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Printer: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Profiel bijwerken met huidige instellingen/overschrijvingen"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Dit profiel gebruikt de standaardinstellingen die door de printer zijn opgegeven, dus er zijn hiervoor geen instellingen/overschrijvingen in de onderstaande lijst."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Uw huidige instellingen komen overeen met het geselecteerde profiel."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Algemene Instellingen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Algemeen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profiel Maken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Geef een naam op voor dit profiel."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profiel Exporteren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profiel Dupliceren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profiel Hernoemen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profiel Importeren"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Valuta:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Thema:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "U moet de toepassing opnieuw starten voordat deze wijzigingen van kracht worden."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Automatisch slicen bij wijzigen van instellingen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatisch slicen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Gedrag kijkvenster"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Geef niet-ondersteunde gedeelten van het model een rode markering. Zonder ondersteuning zullen deze gedeelten niet goed worden geprint."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Overhang weergeven"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Markeer ontbrekende of ongebruikelijke oppervlakken van het model met behulp van waarschuwingstekens. De toolpaths zullen vaak delen van de beoogde geometrie missen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Modelfouten weergeven"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Verplaatst de camera zodanig dat wanneer een model wordt geselecteerd, het model in het midden van het beeld wordt weergegeven"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Camera centreren wanneer een item wordt geselecteerd"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Moet het standaard zoomgedrag van Cura worden omgekeerd?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Keer de richting van de camerazoom om."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Moet het zoomen in de richting van de muis gebeuren?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Zoomen in de richting van de muis wordt niet ondersteund in het orthografische perspectief."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomen in de richting van de muis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Moeten modellen op het platform zodanig worden verplaatst dat ze elkaar niet meer doorsnijden?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Modellen gescheiden houden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Moeten modellen in het printgebied omlaag worden gebracht zodat ze het platform raken?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Modellen automatisch op het platform laten vallen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Toon het waarschuwingsbericht in de G-code-lezer."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Waarschuwingsbericht in de G-code-lezer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Moet de laag in de compatibiliteitsmodus worden geforceerd?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Compatibiliteitsmodus voor laagweergave forceren (opnieuw opstarten vereist)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Moet Cura openen op de locatie waar het gesloten werd?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Herstel de vensterpositie bij het opstarten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Welk type cameraweergave moet worden gebruikt?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Cameraweergave:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Perspectief"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Orthografisch"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Bestanden openen en opslaan"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Wilt u dat bestanden vanaf de desktop of externe toepassingen in dezelfde instantie van Cura worden geopend?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Gebruik één instantie van Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "Moet het platform worden leeggemaakt voordat u een nieuw model laadt in de dezelfde instantie van Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Maak platform leeg voordat u een model laadt in dezelfde instantie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Moeten modellen worden geschaald naar het werkvolume als ze te groot zijn?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Grote modellen schalen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Een model wordt mogelijk extreem klein weergegeven als de eenheden bijvoorbeeld in meters zijn in plaats van in millimeters. Moeten dergelijke modellen worden opgeschaald?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Extreem kleine modellen schalen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Moeten modellen worden geselecteerd nadat ze zijn geladen?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Modellen selecteren wanneer ze geladen zijn"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Moet er automatisch een op de printernaam gebaseerde voorvoegsel aan de naam van de printtaak worden toegevoegd?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Machinevoorvoegsel toevoegen aan taaknaam"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Dient er een samenvatting te worden weergegeven wanneer een projectbestand wordt opgeslagen?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Dialoogvenster voor samenvatting weergeven tijdens het opslaan van een project"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Standaardgedrag tijdens het openen van een projectbestand"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Standaardgedrag tijdens het openen van een projectbestand: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Altijd vragen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Altijd als project openen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Altijd modellen importeren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Wanneer u wijzigingen hebt aangebracht aan een profiel en naar een ander profiel wisselt, wordt een dialoogvenster weergegeven waarin u wordt gevraagd of u de aanpassingen wilt behouden. U kunt ook een standaardgedrag kiezen en het dialoogvenster nooit meer laten weergeven."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Standaardgedrag voor gewijzigde instellingen wanneer er naar een ander profiel wordt overgeschakeld: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Gewijzigde instellingen altijd verwijderen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Gewijzigde instellingen altijd naar nieuw profiel overbrengen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Mogen anonieme gegevens over uw print naar Ultimaker worden verzonden? Opmerking: er worden geen modellen, IP-adressen of andere persoonlijk identificeerbare gegevens verzonden of opgeslagen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(Anonieme) printgegevens verzenden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Meer informatie"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Updates"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Moet Cura op updates controleren wanneer het programma wordt gestart?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Bij starten op updates controleren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "Kijk bij het controleren op updates alleen naar stabiele releases."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Alleen stabiele releases"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "Kijk bij het controleren op updates naar stabiele releases en bèta-releases."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "Stabiele releases en bèta-releases"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Moet er elke keer dat Cura wordt opgestart automatisch worden gecontroleerd op nieuwe plug-ins? Wij raden u ten zeerste aan dit niet uit te schakelen!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Meldingen ontvangen als er updates zijn voor pug-ins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informatie"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Een printer toevoegen op IP-adres"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Diameterwijziging bevestigen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Voer het IP-adres van uw printer in."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Het nieuwe filament is ingesteld op %1 mm. Dit is niet compatibel met de huidige extruder. Wilt u verder gaan?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Toevoegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Naam"
+msgid "Could not connect to device."
+msgstr "Kan geen verbinding maken met het apparaat."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Type Materiaal"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Kunt u geen verbinding maken met uw Ultimaker-printer?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Kleur"
+msgid "The printer at this address has not responded yet."
+msgstr "De printer op dit adres heeft nog niet gereageerd."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Eigenschappen"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Kan de printer niet toevoegen omdat het een onbekende printer is of omdat het niet de host in een groep is."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Dichtheid"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Verbinding maken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Diameter"
+msgid "Release Notes"
+msgstr "Release notes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Kostprijs Filament"
+msgid "User Agreement"
+msgstr "Gebruikersovereenkomst"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Gewicht filament"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Akkoord"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Lengte filament"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Afwijzen en sluiten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Kostprijs per meter"
+msgid "What's New"
+msgstr "Nieuwe functies"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Volgende"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Dit materiaal is gekoppeld aan %1 en deelt hiermee enkele eigenschappen."
+msgid "Add a Cloud printer"
+msgstr "Een cloudprinter toevoegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Materiaal ontkoppelen"
+msgid "Waiting for Cloud response"
+msgstr "Wachten op cloudreactie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Beschrijving"
+msgid "No printers found in your account?"
+msgstr "Geen printers gevonden in uw account?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Gegevens Hechting"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "De volgende printers in uw account zijn toegevoegd in Cura:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Maken"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Printer handmatig toevoegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Dupliceren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Voeg materiaalinstellingen en plugins uit de Marktplaats toe"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Synchroniseren met printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Maak een back-up van uw materiaalinstellingen en plug-ins en synchroniseer deze"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Deel ideeën met 48,000+ gebruikers in de Ultimaker Community of vraag hen om ondersteuning"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Materiaal Importeren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Overslaan"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Kon materiaal <filename>%1</filename> niet importeren: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Maak een gratis Ultimaker-account aan"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Materiaal <filename>%1</filename> is geïmporteerd"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Welkom bij Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Materiaal Exporteren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"Volg deze stappen voor het instellen van\n"
+"Ultimaker Cura. Dit duurt slechts even."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Exporteren van materiaal naar <filename>%1</filename> is mislukt: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Aan de slag"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Materiaal is geëxporteerd naar <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Leeg"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Synchroniseer materialen met printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabrikant"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Synchroniseer materialen met printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Profieleigenaar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "Met een paar simpele stappen kunt u al uw materiaalprofielen synchroniseren met uw printers."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Printernaam"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Starten"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Geef uw printer een naam"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "Waarom moet ik materiaalprofielen synchroniseren?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Een printer toevoegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Aanmelden"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Een netwerkprinter toevoegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Om de materiaalprofielen automatisch te synchroniseren met alle printers die op Digital Factory zijn aangesloten, moet u zich aanmelden bij Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Een niet-netwerkprinter toevoegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Materialen synchroniseren met USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Kan in uw netwerk geen printer vinden."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "De volgende printers ontvangen de nieuwe materiaalprofielen:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Vernieuwen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "Er is iets misgegaan bij het verzenden van de materialen naar de printers."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Printer toevoegen op IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "Materiaalprofielen zijn gesynchroniseerd met de volgende printers:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Een cloudprinter toevoegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Probleemoplossing"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "Ontbreken er printers?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Help ons Ultimaker Cura te verbeteren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Controleer of alle printers zijn ingeschakeld en zijn aangesloten op Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Lijst vernieuwen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Probeer het opnieuw"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Klaar"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren, waaronder:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Synchroniseren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Machinetypen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "Synchroniseren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Materiaalgebruik"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "Geen printers gevonden"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Aantal slices"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Mogelijk zijn er geen compatibele printers op Digital Factory aangesloten. Controleer of de printer is aangesloten en de nieuwste firmware op de printer"
-" is geïnstalleerd."
+msgid "Print settings"
+msgstr "Instellingen voor printen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Meer informatie over het aansluiten van de printer op Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "De gegevens die Ultimaker Cura verzamelt, bevatten geen persoonlijke informatie."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Vernieuwen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Meer informatie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Materiaalprofielen synchroniseren via USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lijst met objecten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Volg onderstaande stappen om nieuwe materiaalprofielen op uw printer te laden."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "Is geprint als support."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Klik op de knop Materiaalarchief exporteren."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "Andere modellen die met dit model overlappen, zijn gewijzigd."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "Bewaar het .umm-bestand op een USB-stick."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "De vulling die met dit model overlapt, is aangepast."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "Steek de USB-stick in de printer en start de procedure om nieuwe materiaalprofielen te laden."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "Overlappingen worden in dit model niet ondersteund."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Hoe u nieuwe materiaalprofielen laadt op Mijn printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Overschrijft %1 instelling."
+msgstr[1] "Overschrijft %1 instellingen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Materiaalarchief exporteren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Verbonden printers"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Alle materialen exporteren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Vooraf ingestelde printers"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Zichtbaarheid Instellen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "De cloudprinter is offline. Controleer of de printer is ingeschakeld en verbonden is met internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Alles aanvinken"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Deze printer is niet gekoppeld aan uw account. Ga naar de Ultimaker Digital Factory om een verbinding tot stand te brengen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "De cloudverbinding is momenteel niet beschikbaar. Log in om verbinding te maken met de cloudprinter."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Berekend"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "De cloudverbinding is momenteel niet beschikbaar. Controleer uw internetverbinding."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Instelling"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Printer toevoegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profiel"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Printers beheren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Huidig"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Eenheid"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Zonder titel"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Niet met een printer verbonden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "Printer accepteert geen opdrachten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "In onderhoud. Controleer de printer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Verbinding met de printer is verbroken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Printen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Gepauzeerd"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Voorbereiden..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Verwijder de print"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Printen Afbreken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Weet u zeker dat u het printen wilt afbreken?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Geselecteerd model printen met %1"
-msgstr[1] "Geselecteerde modellen printen met %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "Mijn printers"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Volg uw printers in Ultimaker Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Maak printprojecten aan in Digital Library."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Printtaken"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Volg printtaken en print opnieuw vanuit uw printgeschiedenis."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Breid Ultimaker Cura uit met plug-ins en materiaalprofielen."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Word een 3D-printexpert met Ultimaker e-learning."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Ondersteuning van Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n"
+"\n"
+"Klik om deze instellingen zichtbaar te maken."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Leer hoe u aan de slag gaat met Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Instellingen zoeken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Stel een vraag"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Waarde naar alle extruders kopiëren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Consulteer de Ultimaker Community."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Alle gewijzigde waarden naar alle extruders kopiëren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Een fout melden"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Deze instelling verbergen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Laat ontwikkelaars weten dat er iets misgaat."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Deze instelling verbergen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Bezoek de Ultimaker-website."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Deze instelling zichtbaar houden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Printerbediening"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Zichtbaarheid Instelling Configureren..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Jog-positie"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Deze instelling wordt niet gebruikt omdat alle instellingen waarop deze invloed heeft, worden overschreven."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Beïnvloedt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Beïnvloed door"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Jog-afstand"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Deze instelling wordt altijd door alle extruders gedeeld. Als u hier de instelling wijzigt, wordt de waarde voor alle extruders gewijzigd."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "G-code verzenden"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Verzend een aangepaste G-code-opdracht naar de verbonden printer. Druk op Enter om de opdracht te verzenden."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Deze instelling wordt afgeleid van strijdige extruderspecifieke waarden:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Extruder"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "De doeltemperatuur van de hot-end. De hot-end wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van de hot-end uitgeschakeld."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "De huidige temperatuur van dit hotend."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "De temperatuur waarnaar het hotend moet worden voorverwarmd."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Annuleren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Voorverwarmen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Verwarm het hotend voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het hotend wordt verwarmd. Zo hoeft u niet te wachten totdat het hotend is opgewarmd wanneer u gereed bent om te printen."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "De kleur van het materiaal in deze extruder."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Het materiaal in deze extruder."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "De nozzle die in deze extruder geplaatst is."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "Er is geen verbinding met de printer."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Deze instelling heeft een andere waarde dan in het profiel.\n"
+"\n"
+"Klik om de waarde van het profiel te herstellen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Platform"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "De doeltemperatuur van het verwarmde bed. Het bed wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van het bed uitgeschakeld."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "De huidige temperatuur van het verwarmde bed."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "De temperatuur waarnaar het bed moet worden voorverwarmd."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Verwarm het bed voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het bed wordt verwarmd. Zo hoeft u niet te wachten totdat het bed opgewarmd is wanneer u gereed bent om te printen."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Aanmelden"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Voeg materiaalprofielen en plug-ins toe uit de Marktplaats\n"
-"- Maak back-ups van uw materiaalprofielen en plug-ins en synchroniseer deze\n"
-"- Deel ideeën met 48.000+ gebruikers in de Ultimaker-community of vraag hen om ondersteuning"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Maak een gratis Ultimaker-account aan"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Laatste update: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker-account"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Afmelden"
+"Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n"
+"\n"
+"Klik om de berekende waarde te herstellen."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Aan het controleren..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Account gesynchroniseerd"
+msgid "Active print"
+msgstr "Actieve print"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Er is een fout opgetreden..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Updates in afwachting installeren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Controleren op accountupdates"
+msgid "Job Name"
+msgstr "Taaknaam"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Zonder titel"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Printtijd"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "Geen items om uit te kiezen"
+msgid "Estimated time left"
+msgstr "Geschatte resterende tijd"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Online gids voor probleemoplossing weergegeven"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Volledig Scherm In-/Uitschakelen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Volledig scherm sluiten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "Ongedaan &Maken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Opnieuw"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Afsluiten"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "3D-weergave"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Weergave voorzijde"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Weergave bovenzijde"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Aanzicht onderzijde"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Weergave linkerzijde"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Weergave rechterzijde"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Cura Configureren..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Printer Toevoegen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Pr&inters Beheren..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Materialen Beheren..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Meer materialen toevoegen van Marketplace"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "Profiel bijwerken met h&uidige instellingen/overschrijvingen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "Hui&dige wijzigingen verwijderen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "Profiel maken op basis van huidige instellingen/overs&chrijvingen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Profielen Beheren..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Online &Documentatie Weergeven"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Een &Bug Rapporteren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Nieuwe functies"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Over..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Verwijder geselecteerde items"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Centreer geselecteerde items"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Verveelvoudig geselecteerde items"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Model Verwijderen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Model op Platform Ce&ntreren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "Modellen &Groeperen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Groeperen van Modellen Opheffen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "Modellen Samen&voegen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Model verveelvoudigen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Alle Modellen Selecteren"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Platform Leegmaken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Alle Modellen Opnieuw Laden"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Alle modellen schikken op alle platformen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Alle modellen schikken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Selectie schikken"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Alle Modelposities Herstellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Alle Modeltransformaties Herstellen"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "Bestand(en) &openen..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Nieuw project..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Open Configuratiemap"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Zichtbaarheid Instelling Configureren..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marktplaats"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Deze instelling wordt niet gebruikt omdat alle instellingen waarop deze invloed heeft, worden overschreven."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Beïnvloedt"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Beïnvloed door"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Deze instelling wordt altijd door alle extruders gedeeld. Als u hier de instelling wijzigt, wordt de waarde voor alle extruders gewijzigd."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Deze instelling wordt afgeleid van strijdige extruderspecifieke waarden:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Deze instelling heeft een andere waarde dan in het profiel.\n"
-"\n"
-"Klik om de waarde van het profiel te herstellen."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n"
-"\n"
-"Klik om de berekende waarde te herstellen."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Instellingen zoeken"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Waarde naar alle extruders kopiëren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Alle gewijzigde waarden naar alle extruders kopiëren"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Deze instelling verbergen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Deze instelling verbergen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Deze instelling zichtbaar houden"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n"
-"\n"
-"Klik om deze instellingen zichtbaar te maken."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Dit package wordt na opnieuw starten geïnstalleerd."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Instellingen"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1 wordt gesloten"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Weet u zeker dat u %1 wilt afsluiten?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Package installeren"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D-weergave"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Bestand(en) openen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Weergave voorzijde"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Binnen de door u geselecteerde bestanden zijn een of meer G-code-bestanden aangetroffen. U kunt maximaal één G-code-bestand tegelijk openen. Selecteer maximaal één bestand als u dit wilt openen als G-code-bestand."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Weergave bovenzijde"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Printer Toevoegen"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Linkeraanzicht"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Nieuwe functies"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Rechteraanzicht"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Biedt de Instellingen per Model."
+msgid "Provides a prepare stage in Cura."
+msgstr "Deze optie biedt een voorbereidingsstadium in Cura."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Gereedschap voor Instellingen per Model"
+msgid "Prepare Stage"
+msgstr "Stadium voorbereiden"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Biedt ondersteuning bij het importeren van Cura-profielen."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Biedt ondersteuning voor het exporteren van Cura-profielen."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura-profiellezer"
+msgid "Cura Profile Writer"
+msgstr "Cura-profielschrijver"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Deze optie biedt ondersteuning voor het lezen van X3D-bestanden."
+msgid "Provides support for reading model files."
+msgstr "Biedt ondersteuning voor het lezen van modelbestanden."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D-lezer"
+msgid "Trimesh Reader"
+msgstr "Trimesh-lezer"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Een back-up maken van uw configuratie en deze herstellen."
+msgid "Checks for firmware updates."
+msgstr "Controleert op firmware-updates."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura-back-ups"
+msgid "Firmware Update Checker"
+msgstr "Firmware-updatecontrole"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle, enz.) te wijzigen."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Hiermee worden bepaalde gebeurtenissen geregistreerd, zodat deze door de crashrapportage kunnen worden gebruikt"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Actie machine-instellingen"
+msgid "Sentry Logger"
+msgstr "Sentrylogger"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Hiermee maakt u een wisraster om het printen van een supportstructuur op bepaalde plekken te blokkeren"
+msgid "Provides a monitor stage in Cura."
+msgstr "Deze optie biedt een controlestadium in Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Supportwisser"
+msgid "Monitor Stage"
+msgstr "Controlestadium"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5996,105 +5987,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Plug-in voor Verwijderbaar Uitvoerapparaat"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Biedt machineacties voor het bijwerken van de firmware."
+msgid "Provides support for reading AMF files."
+msgstr "Biedt ondersteuning voor het lezen van AMF-bestanden."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Firmware-updater"
+msgid "AMF Reader"
+msgstr "AMF-lezer"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Biedt ondersteuning voor het importeren van profielen uit oudere Cura-versies."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Deze optie biedt ondersteuning voor het lezen van Ultimaker Format Packages."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lezer voor Profielen van oudere Cura-versies"
+msgid "UFP Reader"
+msgstr "UFP-lezer"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Biedt ondersteuning voor het lezen van 3MF-bestanden."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Maakt verbinding met de digitale bibliotheek, zodat Cura bestanden kan openen vanuit, en bestanden kan opslaan in, de digitale bibliotheek."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF-lezer"
+msgid "Ultimaker Digital Library"
+msgstr "Ultimaker Digital Library"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Deze optie biedt ondersteuning voor het schrijven van Ultimaker Format Packages."
+msgid "Provides the Per Model Settings."
+msgstr "Biedt de Instellingen per Model."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP-schrijver"
+msgid "Per Model Settings Tool"
+msgstr "Gereedschap voor Instellingen per Model"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Hiermee worden bepaalde gebeurtenissen geregistreerd, zodat deze door de crashrapportage kunnen worden gebruikt"
+msgid "Provides a machine actions for updating firmware."
+msgstr "Biedt machineacties voor het bijwerken van de firmware."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentrylogger"
+msgid "Firmware Updater"
+msgstr "Firmware-updater"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Biedt ondersteuning voor het importeren van profielen uit G-code-bestanden."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker-netwerkprinters."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code-profiellezer"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker-netwerkverbinding"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Deze optie biedt een voorbeeldstadium in Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Via deze optie controleert u de modellen en de printconfiguratie op mogelijke printproblemen en ontvangt u suggesties."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Voorbeeldstadium"
+msgid "Model Checker"
+msgstr "Modelcontrole"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Biedt de röntgenweergave."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgenweergave"
+msgid "Simulation View"
+msgstr "Simulatieweergave"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Voorziet in de koppeling naar het slicing-back-end van de CuraEngine."
+msgid "Writes g-code to a file."
+msgstr "Met deze optie schrijft u G-code naar een bestand."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine-back-end"
+msgid "G-code Writer"
+msgstr "G-code-schrijver"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Biedt ondersteuning voor het lezen van AMF-bestanden."
+msgid "Provides support for writing 3MF files."
+msgstr "Biedt ondersteuning voor het schrijven van 3MF-bestanden."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF-lezer"
+msgid "3MF Writer"
+msgstr "3MF-schrijver"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6106,175 +6097,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Lezer voor gecomprimeerde G-code"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Uitbreiding waarmee door de gebruiker gemaakte scripts voor nabewerking kunnen worden gebruikt"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Biedt mogelijkheden om materiaalprofielen op XML-basis te lezen en te schrijven."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Nabewerking"
+msgid "Material Profiles"
+msgstr "Materiaalprofielen"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Biedt ondersteuning voor het exporteren van Cura-profielen."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Voorziet in de koppeling naar het slicing-back-end van de CuraEngine."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura-profielschrijver"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine-back-end"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Hiermee accepteert u G-code en verzendt u deze code naar een printer. Via de plug-in kan tevens de firmware worden bijgewerkt."
+msgid "Provides support for reading X3D files."
+msgstr "Deze optie biedt ondersteuning voor het lezen van X3D-bestanden."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB-printen"
+msgid "X3D Reader"
+msgstr "X3D-lezer"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Deze optie biedt een voorbereidingsstadium in Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Hiermee wordt het genereren van printbare geometrie van 2D-afbeeldingsbestanden mogelijk."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Stadium voorbereiden"
+msgid "Image Reader"
+msgstr "Afbeeldinglezer"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Hiermee kunt u G-code-bestanden laden en weergeven."
+msgid "Provides support for reading 3MF files."
+msgstr "Biedt ondersteuning voor het lezen van 3MF-bestanden."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code-lezer"
+msgid "3MF Reader"
+msgstr "3MF-lezer"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Hiermee wordt het genereren van printbare geometrie van 2D-afbeeldingsbestanden mogelijk."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Deze optie biedt ondersteuning voor het schrijven van Ultimaker Format Packages."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Afbeeldinglezer"
+msgid "UFP Writer"
+msgstr "UFP-schrijver"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Biedt machineacties voor Ultimaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades, enz.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Biedt ondersteuning voor het importeren van profielen uit oudere Cura-versies."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Acties Ultimaker-machines"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lezer voor Profielen van oudere Cura-versies"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Met deze optie schrijft u G-code naar een gecomprimeerd archief."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.3 naar Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Schrijver voor gecomprimeerde G-code"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Versie-upgrade van 4.3 naar 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Controleert op firmware-updates."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.1 naar Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Firmware-updatecontrole"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Versie-upgrade van 2.1 naar 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Verzendt anonieme slice-informatie. Dit kan bij de voorkeuren worden uitgeschakeld."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.1 naar Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Slice-informatie"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Versie-upgrade van 4.1 naar 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Biedt mogelijkheden om materiaalprofielen op XML-basis te lezen en te schrijven."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Materiaalprofielen"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Maakt verbinding met de digitale bibliotheek, zodat Cura bestanden kan openen vanuit, en bestanden kan opslaan in, de digitale bibliotheek."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.5 naar Cura 4.6."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Ultimaker Digital Library"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Versie-upgrade van 4.5 naar 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Nieuwe Cura-packages zoeken, beheren en installeren."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.3 naar Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Werkset"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Versie-upgrade van 3.3 naar 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Met deze optie schrijft u G-code naar een bestand."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.9."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code-schrijver"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "Versie-upgrade van 4.8 naar 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Hiermee geeft u de simulatieweergave weer."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.7 naar Cura 3.0."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Simulatieweergave"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Versie-upgrade van 2.7 naar 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.5 naar Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.4 naar Cura 4.5."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Versie-upgrade van 4.5 naar 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Versie-upgrade van 4.4 naar 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.5 naar Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.0 naar Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Versie-upgrade van 2.5 naar 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Versie-upgrade van 3.0 naar 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6286,115 +6277,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "Versie-upgrade van 4.6.0 naar 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.6 naar Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Versie-upgrade van 4.7 naar 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Versie-upgrade van 2.6 naar 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.4 naar Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.2 naar Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Versie-upgrade van 3.4 naar 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Versie-upgrade van 4.2 naar 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.1 naar Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.0 naar Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Versie-upgrade van 2.1 naar 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Versie-upgrade van 4.0 naar 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.2 naar Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.2 naar Cura 4.7."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Versie-upgrade van 3.2 naar 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Versie-upgrade van 4.6.2 naar 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.9 naar Cura 4.10."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "Versie-upgrade van 4.8 naar 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "Versie-upgrade 4.9 naar 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.2 naar Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.2 naar Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Versie-upgrade van 4.6.2 naar 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Versie-upgrade van 2.2 naar 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.2 naar Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.2 naar Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Versie-upgrade van 4.2 naar 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Versie-upgrade van 3.2 naar 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.3 naar Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.5 naar Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Versie-upgrade van 4.3 naar 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Versie-upgrade van 2.5 naar 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.9 naar Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.5 naar Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "Versie-upgrade 4.9 naar 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Versie-upgrade van 3.5 naar 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.7 naar Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.4 naar Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Versie-upgrade van 2.7 naar 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Versie-upgrade van 3.4 naar 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.6 naar Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.8."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Versie-upgrade van 2.6 naar 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Versie-upgrade van 4.7 naar 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6406,105 +6397,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "Versie-upgrade van 4.11 naar 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.3 naar Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Een back-up maken van uw configuratie en deze herstellen."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Versie-upgrade van 3.3 naar 3.4"
+msgid "Cura Backups"
+msgstr "Cura-back-ups"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.0 naar Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Biedt ondersteuning bij het importeren van Cura-profielen."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Versie-upgrade van 3.0 naar 3.1"
+msgid "Cura Profile Reader"
+msgstr "Cura-profiellezer"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.0 naar Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Verzendt anonieme slice-informatie. Dit kan bij de voorkeuren worden uitgeschakeld."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Versie-upgrade van 4.0 naar 4.1"
+msgid "Slice info"
+msgstr "Slice-informatie"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.4 naar Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Biedt ondersteuning voor het importeren van profielen uit G-code-bestanden."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Versie-upgrade van 4.4 naar 4.5"
+msgid "G-code Profile Reader"
+msgstr "G-code-profiellezer"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.2 naar Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "Met deze optie schrijft u G-code naar een gecomprimeerd archief."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Versie-upgrade van 2.2 naar 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Schrijver voor gecomprimeerde G-code"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.1 naar Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Uitbreiding waarmee door de gebruiker gemaakte scripts voor nabewerking kunnen worden gebruikt"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Versie-upgrade van 4.1 naar 4.2"
+msgid "Post Processing"
+msgstr "Nabewerking"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.5 naar Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Hiermee maakt u een wisraster om het printen van een supportstructuur op bepaalde plekken te blokkeren"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Versie-upgrade van 3.5 naar 4.0"
+msgid "Support Eraser"
+msgstr "Supportwisser"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker-netwerkprinters."
+msgid "Provides a preview stage in Cura."
+msgstr "Deze optie biedt een voorbeeldstadium in Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker-netwerkverbinding"
+msgid "Preview Stage"
+msgstr "Voorbeeldstadium"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Biedt ondersteuning voor het lezen van modelbestanden."
+msgid "Provides the X-Ray view."
+msgstr "Biedt de röntgenweergave."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh-lezer"
+msgid "X-Ray View"
+msgstr "Röntgenweergave"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Deze optie biedt ondersteuning voor het lezen van Ultimaker Format Packages."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Biedt machineacties voor Ultimaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades, enz.)"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP-lezer"
+msgid "Ultimaker machine actions"
+msgstr "Acties Ultimaker-machines"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6516,35 +6517,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Solide weergave"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Biedt ondersteuning voor het schrijven van 3MF-bestanden."
+msgid "Allows loading and displaying G-code files."
+msgstr "Hiermee kunt u G-code-bestanden laden en weergeven."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF-schrijver"
+msgid "G-code Reader"
+msgstr "G-code-lezer"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Deze optie biedt een controlestadium in Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle, enz.) te wijzigen."
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Controlestadium"
+msgid "Machine Settings Action"
+msgstr "Actie machine-instellingen"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Via deze optie controleert u de modellen en de printconfiguratie op mogelijke printproblemen en ontvangt u suggesties."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Hiermee accepteert u G-code en verzendt u deze code naar een printer. Via de plug-in kan tevens de firmware worden bijgewerkt."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Modelcontrole"
+msgid "USB printing"
+msgstr "USB-printen"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Synchroniseer materialen"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "U moet {} afsluiten en herstarten voordat de wijzigingen van kracht worden."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "Synchroniseren ..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Wijzigingen gedetecteerd van uw Ultimaker-account"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "Wilt u materiaal- en softwarepackages synchroniseren met uw account?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Synchroniseren"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Weigeren en verwijderen uit account"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "{} plug-ins zijn niet gedownload"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Licentieovereenkomst plug-in"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Afbeelding Converteren..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "De breedte op het platform in millimeters."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Marktplaats"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "U moet Cura opnieuw starten voordat wijzigingen in packages van kracht worden."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Installeren"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Geïnstalleerd"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Premium"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Ga naar Marketplace op internet"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Materialen zoeken"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Compatibiliteit"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Machine"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Platform"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Supportstructuur"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Kwaliteit"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Technisch informatieblad"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Veiligheidsinformatieblad"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Richtlijnen voor printen"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Website"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "<a href='%1'>Aanmelden</a> is vereist voor installeren of bijwerken"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>Materiaalspoelen kopen</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Bijwerken"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Bijwerken"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Bijgewerkt"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Terug"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Plug-ins"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Geïnstalleerd"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Wordt geïnstalleerd na opnieuw starten"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "<a href='%1'>Aanmelden</a> is vereist voor het bijwerken"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Downgraden"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "De-installeren"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Community-bijdragen"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Community-plug-ins"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Standaard materialen"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Packages ophalen..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Website"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "E-mail"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Meld u aan voor geverifieerde plug-ins en materialen voor Ultimaker Cura Enterprise"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Versie"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Laatst bijgewerkt"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Downloads"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Geïnstalleerde plug-ins"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "Er zijn geen plug-ins geïnstalleerd."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Geïnstalleerde materialen"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "Er zijn materialen geïnstalleerd."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Gebundelde plug-ins"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Gebundelde materialen"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Kan geen verbinding maken met de Cura Package-database. Controleer uw verbinding."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "U moet de licentie accepteren om de package te installeren"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Wijzigingen van uw account"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Verwijderen"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "De volgende packages worden toegevoegd:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "De volgende packages kunnen niet worden geïnstalleerd omdat de Cura-versie niet compatibel is:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "De-installeren bevestigen"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "U verwijdert materialen en/of profielen die nog in gebruik zijn. Wanneer u het verwijderen bevestigt, worden de volgende materialen/profielen teruggezet naar hun standaardinstellingen."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Materialen"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Profielen"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Bevestigen"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "In deze print kunnen problemen ontstaan. Klik om tips voor aanpassingen te bekijken."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Ondersteuningsbibliotheek voor het verwerken van tweedimensionale objecten"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "U hebt enkele profielinstellingen aangepast.\n"
+#~ "Wilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\n"
+#~ "U kunt de wijzigingen ook verwijderen om de standaardinstellingen van '%1' te laden."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "&Platform"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Maken"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Dupliceren"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Printer: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Profiel bijwerken met huidige instellingen/overschrijvingen"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Thema:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "U moet de toepassing opnieuw starten voordat deze wijzigingen van kracht worden."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Meer informatie"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Maken"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Synchroniseren met printers"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Printer"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Eenheid"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Online gids voor probleemoplossing weergegeven"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Meer materialen toevoegen van Marketplace"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Alle modellen schikken op alle platformen"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Marktplaats"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Nieuwe Cura-packages zoeken, beheren en installeren."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Werkset"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Hiermee geeft u de simulatieweergave weer."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/nl_NL/fdmextruder.def.json.po b/resources/i18n/nl_NL/fdmextruder.def.json.po
index bc037bede2..1db54438a4 100644
--- a/resources/i18n/nl_NL/fdmextruder.def.json.po
+++ b/resources/i18n/nl_NL/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:03+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Dutch\n"
diff --git a/resources/i18n/nl_NL/fdmprinter.def.json.po b/resources/i18n/nl_NL/fdmprinter.def.json.po
index a10f380139..a85aa94f57 100644
--- a/resources/i18n/nl_NL/fdmprinter.def.json.po
+++ b/resources/i18n/nl_NL/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:03+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Dutch <info@lionbridge.com>, Dutch <info@bothof.nl>\n"
@@ -56,7 +56,9 @@ msgctxt "machine_start_gcode description"
 msgid ""
 "G-code commands to be executed at the very start - separated by \n"
 "."
-msgstr "G-code-opdrachten die aan het begin worden uitgevoerd, gescheiden door \n."
+msgstr ""
+"G-code-opdrachten die aan het begin worden uitgevoerd, gescheiden door \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
@@ -68,7 +70,9 @@ msgctxt "machine_end_gcode description"
 msgid ""
 "G-code commands to be executed at the very end - separated by \n"
 "."
-msgstr "G-code-opdrachten die aan het eind worden uitgevoerd, gescheiden door \n."
+msgstr ""
+"G-code-opdrachten die aan het eind worden uitgevoerd, gescheiden door \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "material_guid label"
@@ -462,8 +466,8 @@ msgstr "Machinekop- en ventilatorpolygoon"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "Een 2D-silouette van de printkop (inclusief ventilatorkappen)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -736,6 +740,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "De diameter van het tandwiel waarmee het materiaal in de feeder wordt gevoerd."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Kwaliteit"
@@ -956,6 +970,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Het aantal wandlijnen. Wanneer deze waarde wordt berekend aan de hand van de wanddikte, wordt deze afgerond naar een geheel getal."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Veegafstand buitenwand"
@@ -986,14 +1050,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Optimaliseer de volgorde waarin wanden worden geprint om het aantal intrekbewegingen en de afgelegde afstand te verkleinen. Deze instelling is gunstig voor de meeste onderdelen. Bij sommige onderdelen duurt het printen echter langer. Controleer daarom de verwachte printtijd met en zonder optimalisatie. De eerste laag wordt niet geoptimaliseerd als u brim kiest als hechting aan platform."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Buitenwanden vóór Binnenwanden"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Wanneer deze optie is ingeschakeld, worden wanden van buiten naar binnen geprint. Hiermee kan de dimensionale nauwkeurigheid in X en Y worden verbeterd wanneer u kunststof met hoge viscositeit gebruikt, zoals ABS. Het kan echter leiden tot een verminderde kwaliteit van het oppervlak van de buitenwand, met name bij overhangen."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1006,94 +1080,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Print op afwisselende lagen een extra wand. Op deze manier wordt vulling tussen deze extra wanden gevangen, wat leidt tot sterkere prints."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Overlapping van Wanden Compenseren"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Compenseer de doorvoer van wanddelen die worden geprint op een plek waar zich al een wanddeel bevindt."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Overlapping van Buitenwanden Compenseren"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Hiermee wordt de doorvoer gecompenseerd voor delen van buitenwanden die worden geprint op een plek waar zich al een wanddeel bevindt."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Overlapping van Binnenwanden Compenseren"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Hiermee wordt de doorvoer gecompenseerd voor delen van binnenwanden die worden geprint op een plek waar zich al een wanddeel bevindt."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Minimale Wand-doorvoer"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Minimaal toegestane doorvoerpercentage voor een wandlijn. Compensatie van de overlapping van wanden zorgt voor een kleinere doorvoer tijdens het printen van een wand als deze dicht bij een bestaande wand ligt. Wanden waarbij de doorvoerwaarde lager is dan deze waarde, worden vervangen door een beweging. Wanneer u deze instelling gebruikt, moet u compensatie van overlapping van wanden inschakelen en de buitenwand printen voordat u de binnenwanden print."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Bij Voorkeur Intrekken"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Als deze optie ingeschakeld is, volgt er een intrekbeweging in plaats van een combing-beweging ter vervanging van wanden waarbij de doorvoer lager is dan de minimale doorvoerwaarde."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Gaten tussen wanden vullen"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Hiermee worden de gaten tussen wanden gevuld op plekken waar geen wand past."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Nergens"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Dunne wanden printen"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Overal"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Print delen van het model die horizontaal dunner zijn dan de maat van de nozzle."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Kleine gaten wegfilteren"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Kleine gaten wegfilteren om blobs aan de buitenzijde van het model te verminderen."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Dunne wanden printen"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Print delen van het model die horizontaal dunner zijn dan de maat van de nozzle."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -1728,10 +1792,7 @@ msgstr "Vulpatroon"
 #: fdmprinter.def.json
 msgctxt "infill_pattern description"
 msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object."
-msgstr "Het patroon van het vulmateriaal van de print. De lijn- en zigzagvulling veranderen per vullaag van richting, waardoor u bespaart op materiaalkosten. De"
-" raster-, driehoeks-, tri-hexagonale, kubische, achtvlaks-, afgeknotte kubus-, kruis- en concentrische patronen worden per laag volledig geprint. Gyroïde,"
-" kubische, afgeknotte kubus- en achtvlaksvullingen veranderen per laag voor een meer gelijke krachtverdeling in elke richting. Bliksemvulling minimaliseert"
-" de vulling doordat deze alleen het plafond van het object ondersteunt."
+msgstr "Het patroon van het vulmateriaal van de print. De lijn- en zigzagvulling veranderen per vullaag van richting, waardoor u bespaart op materiaalkosten. De raster-, driehoeks-, tri-hexagonale, kubische, achtvlaks-, afgeknotte kubus-, kruis- en concentrische patronen worden per laag volledig geprint. Gyroïde, kubische, afgeknotte kubus- en achtvlaksvullingen veranderen per laag voor een meer gelijke krachtverdeling in elke richting. Bliksemvulling minimaliseert de vulling doordat deze alleen het plafond van het object ondersteunt."
 
 #: fdmprinter.def.json
 msgctxt "infill_pattern option grid"
@@ -2198,6 +2259,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Het model wordt met deze factor geschaald ter compensatie van het krimpen van het materiaal tijdens het afkoelen."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Kristallijnmateriaal"
@@ -2708,24 +2789,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "De eerste lagen worden minder snel geprint dan de rest van het model, om ervoor te zorgen dat dit zich beter hecht aan het platform en om de kans dat de print slaagt te vergroten. Tijdens het printen van deze lagen wordt de snelheid geleidelijk opgevoerd."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Filamentdoorvoer Afstemmen"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Print lijnen die dunner zijn dan normaal, sneller zodat de hoeveelheid doorgevoerd materiaal per seconde hetzelfde blijft. Voor dunne delen in het model dienen de lijnen mogelijk met een dunnere lijnbreedte te worden geprint dan is opgegeven in de instellingen. Met deze instelling worden de snelheidswisselingen voor dergelijke lijnen beheerd."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Maximale Snelheid voor het Afstemmen van Doorvoer"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Maximale printsnelheid tijdens het aanpassen van de printsnelheid om de doorvoer af te stemmen."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4463,6 +4534,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "De extruder train die wordt gebruikt voor het printen van de skirt/brim/raft. Deze optie wordt gebruikt in meervoudige doorvoer."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Aantal Skirtlijnen"
@@ -4627,6 +4738,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "De afstand tussen de raftlijnen voor de bovenste lagen van de raft. Als u een solide oppervlak wilt maken, moet de ruimte gelijk zijn aan de lijnbreedte."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Lijndikte Midden Raft"
@@ -5127,6 +5248,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "De maximaal toegestane afwijking tijdens het verlagen van de resolutie voor de instelling Maximale resolutie. Als u deze waarde verhoogt, wordt de print minder nauwkeurig, maar wordt de G-code kleiner. Maximale afwijking is een limiet voor Maximale resolutie, dus als de twee tegenstrijdig zijn, wordt de Maximale afwijking altijd aangehouden."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Speciale Modi"
@@ -6421,6 +6552,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "Kleine kenmerken op de eerste laag worden geprint met een snelheid die gelijk is aan dit percentage van hun normale printsnelheid. Langzamer printen kan de hechting en nauwkeurigheid verbeteren."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Instellingen opdrachtregel"
@@ -6480,6 +6641,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Omzettingsmatrix die moet worden toegepast op het model wanneer dit wordt geladen vanuit een bestand."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "Een 2D-silouette van de printkop (inclusief ventilatorkappen)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Buitenwanden vóór Binnenwanden"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Wanneer deze optie is ingeschakeld, worden wanden van buiten naar binnen geprint. Hiermee kan de dimensionale nauwkeurigheid in X en Y worden verbeterd wanneer u kunststof met hoge viscositeit gebruikt, zoals ABS. Het kan echter leiden tot een verminderde kwaliteit van het oppervlak van de buitenwand, met name bij overhangen."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Overlapping van Wanden Compenseren"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Compenseer de doorvoer van wanddelen die worden geprint op een plek waar zich al een wanddeel bevindt."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Overlapping van Buitenwanden Compenseren"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Hiermee wordt de doorvoer gecompenseerd voor delen van buitenwanden die worden geprint op een plek waar zich al een wanddeel bevindt."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Overlapping van Binnenwanden Compenseren"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Hiermee wordt de doorvoer gecompenseerd voor delen van binnenwanden die worden geprint op een plek waar zich al een wanddeel bevindt."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Minimale Wand-doorvoer"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Minimaal toegestane doorvoerpercentage voor een wandlijn. Compensatie van de overlapping van wanden zorgt voor een kleinere doorvoer tijdens het printen van een wand als deze dicht bij een bestaande wand ligt. Wanden waarbij de doorvoerwaarde lager is dan deze waarde, worden vervangen door een beweging. Wanneer u deze instelling gebruikt, moet u compensatie van overlapping van wanden inschakelen en de buitenwand printen voordat u de binnenwanden print."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Bij Voorkeur Intrekken"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Als deze optie ingeschakeld is, volgt er een intrekbeweging in plaats van een combing-beweging ter vervanging van wanden waarbij de doorvoer lager is dan de minimale doorvoerwaarde."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Gaten tussen wanden vullen"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Hiermee worden de gaten tussen wanden gevuld op plekken waar geen wand past."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Nergens"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Overal"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Kleine gaten wegfilteren"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Kleine gaten wegfilteren om blobs aan de buitenzijde van het model te verminderen."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Filamentdoorvoer Afstemmen"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Print lijnen die dunner zijn dan normaal, sneller zodat de hoeveelheid doorgevoerd materiaal per seconde hetzelfde blijft. Voor dunne delen in het model dienen de lijnen mogelijk met een dunnere lijnbreedte te worden geprint dan is opgegeven in de instellingen. Met deze instelling worden de snelheidswisselingen voor dergelijke lijnen beheerd."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Maximale Snelheid voor het Afstemmen van Doorvoer"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Maximale printsnelheid tijdens het aanpassen van de printsnelheid om de doorvoer af te stemmen."
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "G-code-opdrachten die aan het begin worden uitgevoerd, gescheiden door \\n."
diff --git a/resources/i18n/pl_PL/cura.po b/resources/i18n/pl_PL/cura.po
index d18671c271..13e50c3379 100644
--- a/resources/i18n/pl_PL/cura.po
+++ b/resources/i18n/pl_PL/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2021-09-07 08:02+0200\n"
 "Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
 "Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
@@ -18,1570 +18,362 @@ msgstr ""
 "X-Generator: Poedit 3.0\n"
 "X-Poedit-SourceCharset: UTF-8\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Nie można utworzyć archiwum z folderu danych użytkownika: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Kopia zapasowa"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura na podstawie niepoprawnych danych lub metadanych."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Próbowano przywrócić kopię zapasową Cura, nowszą od aktualnej wersji."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Wysokość obszaru roboczego została zmniejszona ze względu na wartość ustawienia Print Sequence (Sekwencja wydruku), aby zapobiec kolizji z wydrukowanymi modelami."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Obszar Roboczy"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nie zastąpione"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Nieznany"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Poniższa drukarka nie może być podłączona, ponieważ jest częścią grupy"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Dostępne drukarki sieciowe"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Przygotuj"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Domyślne"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Profile Cura"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Profile niestandardowe"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Otwórz skompresowaną siatkę trójkątów"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Wszystkie Wspierane Typy ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "Cyfrowa wymiana zasobów COLLADA"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Wszystkie Pliki (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Wizualny"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Profil wizualny jest przeznaczony do drukowania prototypów i modeli z zamiarem podkreślenia wysokiej jakości wizualnej i powierzchni."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Inżynieria"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Profil inżynieryjny jest przeznaczony do drukowania prototypów funkcjonalnych i części końcowych z naciskiem na lepszą dokładność i lepszą tolerancję."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Szkic"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Profil szkicu służy do drukowania początkowych prototypów i weryfikacji koncepcji z naciskiem na krótki czasu drukowania."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Niestandardowy materiał"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Niestandardowy"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Logowanie nie powiodło się"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Znajdowanie nowej lokalizacji obiektów"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Szukanie Lokalizacji"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Nie można znaleźć lokalizacji w obrębie obszaru roboczego dla wszystkich obiektów"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Nie można Znaleźć Lokalizacji"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Ładowanie drukarek..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Ustawianie preferencji..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Ustawianie sceny ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Ładowanie interfejsu ..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Jednocześnie można załadować tylko jeden plik G-code. Pominięto importowanie {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Ostrzeżenie"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Nie można otworzyć żadnego innego pliku, jeśli ładuje się G-code. Pominięto importowanie {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Błąd"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Zamknij"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Następny"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Dodaj"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Anuluj"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Grupa #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Zewnętrzna ściana"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Ściany wewnętrzne"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Skin"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Wypełnienie"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Wypełnienie podpór"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Łączenie podpory"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Podpory"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Obwódka"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Wieża czyszcząca"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Ruch jałowy"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Retrakcja"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Inny"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura nie może się uruchomić"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>Ups, Ultimaker Cura natrafiła coś co nie wygląda dobrze.</p></b>\n"
-"                    <p>Natrafiliśmy na nieodwracalny błąd podczas uruchamiania. Prawdopodobnie jest to spowodowane błędem w plikach konfiguracyjnych. Zalecamy backup i reset konfiguracji.</p>\n"
-"                    <p>Backupy mogą być znalezione w folderze konfiguracyjnym.</p>\n"
-"                    <p>Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem.</p>\n"
-"              "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Wyślij raport błędu do Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Pokaż szczegółowy raport błędu"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Pokaż folder konfiguracyjny"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Zrób Backup i Zresetuj Konfigurację"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Raport Błędu"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Wystąpił błąd krytyczny. Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem</p></b>\n"
-"            <p>Proszę użyj przycisku \"Wyślij raport\", aby wysłać raport błędu automatycznie na nasze serwery</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Informacje o systemie"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Nieznany"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Wersja Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Platforma"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Wersja Qt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "Wersja PyQt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Jeszcze nie uruchomiono<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>Wersja OpenGL: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>Wydawca OpenGL: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL Renderer: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Śledzenie błedu"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Logi"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Wyślij raport"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Nie można uzyskać dostępu do serwera kont Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Proszę nadać wymagane uprawnienia podczas autoryzacji tej aplikacji."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Coś nieoczekiwanego się stało, podczas próby logowania, spróbuj ponownie."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Nie można odczytać odpowiedzi."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Zwielokrotnienie i umieszczanie przedmiotów"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Umieść Obiekty"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Rozmieszczenie Obiektów"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Niewspierany"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Domyślne"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Dysza"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Ustawienia zostały zmienione w celu dopasowania do bieżącej dostępności ekstruderów:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Ustawienia zostały zaaktualizowane"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Ekstruder(y) wyłączony(/e)"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Plik już istnieje"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Plik <filename>{0}</filename> już istnieje. Czy na pewno chcesz go nadpisać?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "Nieprawidłowy adres URL pliku:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Nie udało się wyeksportować profilu do <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Nie można eksportować profilu do <filename>{0}</filename>: Wtyczka pisarza zgłosiła błąd."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Wyeksportowano profil do <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Eksport udany"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Nie powiódł się import profilu z <filename>{0}</filename>: {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Nie można importować profilu z <filename>{0}</filename> przed dodaniem drukarki."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Brak niestandardowego profilu do importu w pliku <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Nie powiódł się import profilu z <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Profil <filename>{0}</filename> zawiera błędne dane, nie można go importować."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Błąd importu profilu z <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "Plik {0} nie zawiera żadnego poprawnego profilu."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Profil {0} ma nieznany typ pliku lub jest uszkodzony."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Niestandardowy profil"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Profilowi brakuje typu jakości."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Ustawienia każdego modelu osobno"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Konfiguruj ustawienia każdego modelu z osobna"
+msgid "glTF Binary"
+msgstr "Biblioteka glTF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Profile Cura"
+msgid "glTF Embedded JSON"
+msgstr "Załączony JSON glTF"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D Plik"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Wystąpił błąd podczas próby przywrócenia kopii zapasowej."
+msgid "Stanford Triangle Format"
+msgstr "Format trójkątów Stanforda"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Kopie zapasowe"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Skompresowana cyfrowa wymiana zasobów COLLADA"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Wystąpił błąd podczas wgrywania kopii zapasowej."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Nie można uzyskać dostępu do informacji o aktualizacji."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Wgrywanie kopii zapasowej..."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Wgrywanie kopii zapasowej zakończone."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Jak zaktualizować"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Zarządzaj kopiami zapasowymi"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Ustawienia drukarki"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blokada Podpory"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Stwórz obszar, w którym podpory nie będą drukowane."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Dysk wymienny"
+msgid "Monitor"
+msgstr "Monitor"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Zapisz na dysk wymienny"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Zapisz na dysk wymienny {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Nie ma żadnych formatów plików do zapisania!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Zapisywanie na Dysk Wymienny <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Zapisywanie"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Nie mogę zapisać do <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Nie mogę znaleźć nazwy pliku podczas próby zapisu do {device}."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Nie można zapisać na wymiennym dysku {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Błąd"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Zapisano na dysk wymienny {0} jako {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Plik Zapisany"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Wyjmij"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Wyjmij urządzenie wymienne {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Wyjęto {0}. Możesz teraz bezpiecznie wyjąć dysk."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Bezpiecznie Odłącz Urządzenie"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Nie można wysunąć {0}. Inny program może używać dysku."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Aktualizacja Oprogramowania Sprzętowego"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profile Cura 15.04"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Zalecane"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Niestandardowe"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Plik projektu <filename>{0}</filename> zawiera nieznany typ maszyny <message>{1}</message>. Nie można zaimportować maszyny. Zostaną zaimportowane modele."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Otwórz Plik Projektu"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr ""
+msgid "Warning"
+msgstr "Ostrzeżenie"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Dysk wymienny"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Plik 3MF"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr ""
+msgid "AMF File"
+msgstr "Plik AMF"
 
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
 msgid "Ultimaker Format Package"
 msgstr "Pakiet Formatu Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Pliki G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Podgląd"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Widok X-Ray"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Przetwarzanie warstw"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "Informacja"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Ustawienia każdego modelu osobno"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Konfiguruj ustawienia każdego modelu z osobna"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Aktualizacja Oprogramowania Sprzętowego"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Nie można pociąć z obecnym materiałem, ponieważ nie jest on kompatybilny z wybraną maszyną lub konfiguracją."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura wykryła profile materiałów, które nie zostały jeszcze zainstalowane na gospodarzu grupy {0}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Nie można pociąć"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Nie można pociąć z bieżącymi ustawieniami. Następujące ustawienia mają błędy: {0}"
+msgid "Sending materials to printer"
+msgstr "Wysyłanie materiałów do drukarki"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Nie można pokroić przez ustawienia osobne dla modelu. Następujące ustawienia mają błędy w jednym lub więcej modeli: {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Nie można pociąć, ponieważ wieża czyszcząca lub jej pozycja(e) są niewłaściwe."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Nie można pociąć, ponieważ obecne są obiekty powiązane z wyłączonym ekstruderem %s."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Plik AMF"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Skompresowany Plik G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Przetwarzanie końcowe"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modyfikuj G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Drukowanie USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Drukuj przez USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Drukuj przez USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Połączono przez USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Trwa drukowanie przez USB, zamknięcie Cura spowoduje jego zatrzymanie. Jesteś pewien?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Nadal trwa drukowanie. Cura nie może rozpocząć kolejnego wydruku przez USB, dopóki poprzedni wydruk nie zostanie zakończony."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Drukowanie w toku"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Przygotuj"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Analizowanie G-code"
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Próbujesz połączyć się z {0}, ale nie jest to gospodarz grupy. Możesz odwiedzić stronę internetową, aby skonfigurować jako gospodarza."
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Szczegóły G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Przed wysłaniem pliku upewnij się, że G-code jest odpowiedni do konfiguracji drukarki. Przedstawienie G-kodu może nie być dokładne."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Plik G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Obraz JPG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Obraz JPEG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Obraz PNG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Obraz BMP"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Obraz GIF"
-
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Wypoziomuj stół"
+msgid "Not a group host"
+msgstr "Nie jest gospodarzem grupy"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Wybierz aktualizacje"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "Zapisywacz skompresowanego G-code nie obsługuje trybu tekstowego."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Nie można uzyskać dostępu do informacji o aktualizacji."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Jak zaktualizować"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Zgadzam się"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Akceptowanie Licencji Wtyczki"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "Zapisywacz G-code nie obsługuje trybu nietekstowego."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Przygotuj G-code przed eksportem."
+msgid "Configure group"
+msgstr "Konfiguruj grupę"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr ""
+msgid "Sending Print Job"
+msgstr "Wysyłanie zadania druku"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Widok symulacji"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Przesyłanie zadania do drukarki."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
+msgid "Print job queue is full. The printer can't accept a new job."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
-msgid "No layers to show"
+msgid "Queue Full"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Nie pokazuj tego komunikatu ponownie"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Widok warstwy"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Drukuj przez sieć"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Drukuj przez sieć"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
-msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Połączone przez sieć"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "jutro"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "dziś"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Połącz przez sieć"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Poczekaj, aż bieżące zadanie zostanie wysłane."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Błąd druku"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Zadanie drukowania zostało pomyślnie wysłane do drukarki."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Dane Wysłane"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Próbujesz połączyć się z drukarką, na której nie działa Ultimaker Connect. Zaktualizuj drukarkę do najnowszej wersji firmware."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Zaktualizuj swoją drukarkę"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
+msgid ""
+"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
+" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
-msgid "Queue Full"
+msgid "Are you ready for cloud printing?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Wysyłanie zadania druku"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+msgctxt "@action"
+msgid "Get started"
+msgstr "Rozpocznij"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Przesyłanie zadania do drukarki."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+msgctxt "@action"
+msgid "Learn more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura wykryła profile materiałów, które nie zostały jeszcze zainstalowane na gospodarzu grupy {0}."
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Próbujesz połączyć się z drukarką, na której nie działa Ultimaker Connect. Zaktualizuj drukarkę do najnowszej wersji firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
 msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Wysyłanie materiałów do drukarki"
+msgid "Update your printer"
+msgstr "Zaktualizuj swoją drukarkę"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Nie można wgrać danych do drukarki."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Błąd sieci"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Próbujesz połączyć się z {0}, ale nie jest to gospodarz grupy. Możesz odwiedzić stronę internetową, aby skonfigurować jako gospodarza."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Nie jest gospodarzem grupy"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Konfiguruj grupę"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
-" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
-msgctxt "@info:title"
-msgid "Are you ready for cloud printing?"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
-msgctxt "@action"
-msgid "Get started"
-msgstr "Rozpocznij"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
-msgctxt "@action"
-msgid "Learn more"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Drukuj przez sieć"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr ""
+msgid "Print over network"
+msgstr "Drukuj przez sieć"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr ""
+msgid "Connected over the network"
+msgstr "Połączone przez sieć"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "jutro"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "dziś"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Połącz przez sieć"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1589,71 +381,71 @@ msgid_plural "... and {0} others"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1665,2084 +457,3127 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Otwórz skompresowaną siatkę trójkątów"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "Cyfrowa wymiana zasobów COLLADA"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "Biblioteka glTF"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "Załączony JSON glTF"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Format trójkątów Stanforda"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Skompresowana cyfrowa wymiana zasobów COLLADA"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Asystent Modelu 3D"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
 msgstr ""
+"<p>Jeden lub więcej modeli 3D może nie zostać wydrukowanych optymalnie ze względu na wymiary modelu oraz konfigurację materiału:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Dowiedz się, jak zapewnić najlepszą możliwą jakość oraz niezawodnośc wydruku.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Zobacz przewodnik po jakości wydruku (strona w języku angielskim)</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
+msgid "Simulation View"
+msgstr "Widok symulacji"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Widok modelu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Nie pokazuj tego komunikatu ponownie"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Widok warstwy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "Zapisywacz G-code nie obsługuje trybu nietekstowego."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Przygotuj G-code przed eksportem."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Pliki G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Błąd zapisu pliku 3mf."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "Plik 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Plik Cura Project 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Skompresowany Plik G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Nie można pociąć z obecnym materiałem, ponieważ nie jest on kompatybilny z wybraną maszyną lub konfiguracją."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Asystent Modelu 3D"
+msgid "Unable to slice"
+msgstr "Nie można pociąć"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Nie można pociąć z bieżącymi ustawieniami. Następujące ustawienia mają błędy: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Nie można pokroić przez ustawienia osobne dla modelu. Następujące ustawienia mają błędy w jednym lub więcej modeli: {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Nie można pociąć, ponieważ wieża czyszcząca lub jej pozycja(e) są niewłaściwe."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Nie można pociąć, ponieważ obecne są obiekty powiązane z wyłączonym ekstruderem %s."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>Jeden lub więcej modeli 3D może nie zostać wydrukowanych optymalnie ze względu na wymiary modelu oraz konfigurację materiału:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Dowiedz się, jak zapewnić najlepszą możliwą jakość oraz niezawodnośc wydruku.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Zobacz przewodnik po jakości wydruku (strona w języku angielskim)</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Typ siatki"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Przetwarzanie warstw"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Normalny model"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informacja"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Drukuj jako podpora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D Plik"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Modyfikuj ustawienia nakładania"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Obraz JPG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Nie wspieraj nałożenia"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Obraz JPEG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr ""
+msgid "PNG Image"
+msgstr "Obraz PNG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr ""
+msgid "BMP Image"
+msgstr "Obraz BMP"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Wybierz ustawienia"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Obraz GIF"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Wybierz Ustawienia, aby dostosować ten model"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Dysza"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtr..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Plik projektu <filename>{0}</filename> zawiera nieznany typ maszyny <message>{1}</message>. Nie można zaimportować maszyny. Zostaną zaimportowane modele."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Pokaż wszystko"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Otwórz Plik Projektu"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Kopie zapasowe cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Wersja Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Drukarki"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiały"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Zalecane"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Pluginy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Niestandardowe"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Chcesz więcej?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "Plik 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Utwórz kopię zapasową"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatyczne tworzenie kopii zapasowej"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profile Cura 15.04"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Automatycznie twórz kopie zapasowe każdego dnia, w którym uruchomiono Curę."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Kopie zapasowe"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Przywróć"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Wystąpił błąd podczas wgrywania kopii zapasowej."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Usuń kopię zapasową"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Czy na pewno chcesz usunąć tę kopię zapasową? Tej czynności nie można cofnąć."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Przywróć kopię zapasową"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Wgrywanie kopii zapasowej..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Musisz zrestartować Curę przed przywróceniem kopii zapasowej. Czy chcesz teraz zamknąć Curę?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Wgrywanie kopii zapasowej zakończone."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Wykonaj kopię zapasową i zsynchronizuj ustawienia Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Zaloguj"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Zarządzaj kopiami zapasowymi"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Moje Kopie Zapasowe"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Kopia zapasowa"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Nie masz żadnych kopii zapasowych. Użyj przycisku „Utwórz kopię zapasową”, aby go utworzyć."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Wystąpił błąd podczas próby przywrócenia kopii zapasowej."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Podczas fazy podglądu będziesz ograniczony do 5 widocznych kopii zapasowych. Usuń kopię zapasową, aby zobaczyć starsze."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Ustawienia drukarki"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "Zapisywacz skompresowanego G-code nie obsługuje trybu tekstowego."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Szerokość)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Przetwarzanie końcowe"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modyfikuj G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Głębokość)"
+msgid "Support Blocker"
+msgstr "Blokada Podpory"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Wysokość)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Stwórz obszar, w którym podpory nie będą drukowane."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Kształt stołu roboczego"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Podgląd"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Początek na środku"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Widok X-Ray"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Podgrzewany stół"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Wypoziomuj stół"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Grzany obszar roboczy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Wybierz aktualizacje"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Wersja G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Ustawienia głowicy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Wysokość wózka"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Liczba ekstruderów"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Początkowy G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Końcowy G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Ustawienia dyszy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Widok modelu"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Rozmiar dyszy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Analizowanie G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Kompatybilna średnica materiału"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Szczegóły G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Korekcja dyszy X"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Przed wysłaniem pliku upewnij się, że G-code jest odpowiedni do konfiguracji drukarki. Przedstawienie G-kodu może nie być dokładne."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Korekcja dyszy Y"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Plik G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Numer Wentylatora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Ustawienia drukarki"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Początkowy G-code ekstrudera"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Drukowanie USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Końcowy G-code ekstrudera"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Drukuj przez USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Drukarka"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Drukuj przez USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Aktualizacja Oprogramowania Sprzętowego"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Połączono przez USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "Oprogramowanie ukłądowe jest częścią oprogramowania działającego bezpośrednio na drukarce 3D. Oprogramowanie to steruje silnikami krokowymi, reguluje temperaturę i ostatecznie sprawia, że drukarka działa."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Trwa drukowanie przez USB, zamknięcie Cura spowoduje jego zatrzymanie. Jesteś pewien?"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
-msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "Oprogramowanie ukłądowe dostarczane z nowymi drukarkami działa, ale nowe wersje mają zazwyczaj więcej funkcji i ulepszeń."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Nadal trwa drukowanie. Cura nie może rozpocząć kolejnego wydruku przez USB, dopóki poprzedni wydruk nie zostanie zakończony."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Automatycznie uaktualnij oprogramowanie"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Drukowanie w toku"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Prześlij niestandardowe oprogramowanie"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Ładowanie drukarek..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
-msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ nie ma połączenia z drukarką."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Ustawianie preferencji..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
-msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ połączenie z drukarką nie wspiera usługi."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Wybierz niestandardowe oprogramowanie"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Aktualizacja oprogramowania układowego"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Ustawianie sceny ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Ładowanie interfejsu ..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Jednocześnie można załadować tylko jeden plik G-code. Pominięto importowanie {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Nie można otworzyć żadnego innego pliku, jeśli ładuje się G-code. Pominięto importowanie {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Aktualizowanie oprogramowania."
+msgid "Default"
+msgstr "Domyślne"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Aktualizacja oprogramowania zakończona."
+msgid "Visual"
+msgstr "Wizualny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Profil wizualny jest przeznaczony do drukowania prototypów i modeli z zamiarem podkreślenia wysokiej jakości wizualnej i powierzchni."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Aktualizacja oprogramowania nie powiodła się z powodu nieznanego błędu."
+msgid "Engineering"
+msgstr "Inżynieria"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Profil inżynieryjny jest przeznaczony do drukowania prototypów funkcjonalnych i części końcowych z naciskiem na lepszą dokładność i lepszą tolerancję."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu komunikacji."
+msgid "Draft"
+msgstr "Szkic"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Profil szkicu służy do drukowania początkowych prototypów i weryfikacji koncepcji z naciskiem na krótki czasu drukowania."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nie zastąpione"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu wejścia / wyjścia."
+msgid "Unknown"
+msgstr "Nieznany"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Aktualizacja oprogramowania nie powiodła się z powodu utraconego oprogramowania."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Poniższa drukarka nie może być podłączona, ponieważ jest częścią grupy"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Otwórz projekt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Dostępne drukarki sieciowe"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Zaktualizuj istniejące"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Przeliczone"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Utwórz nowy"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Podsumowanie - Projekt Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Ustawienia drukarki"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Jak powinny być rozwiązywane błędy w maszynie?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
+msgctxt "@label"
+msgid "Custom Material"
+msgstr "Niestandardowy materiał"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Typ"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
+msgctxt "@label"
+msgid "Custom"
+msgstr "Niestandardowy"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Grupa drukarek"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
+msgctxt "@label"
+msgid "Custom profiles"
+msgstr "Profile niestandardowe"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Ustawienia profilu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Wszystkie Wspierane Typy ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Jak powinien zostać rozwiązany problem z profilem?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Wszystkie Pliki (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nazwa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Cel"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Nie w profilu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 nadpisanie"
-msgstr[1] "%1 Zastępuje"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Pochodna z"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 nadpisanie"
-msgstr[1] "%1, %2 zastępuje"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Ustawienia materiału"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Nie można utworzyć archiwum z folderu danych użytkownika: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Jak powinien zostać rozwiązany problem z materiałem?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura na podstawie niepoprawnych danych lub metadanych."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Ustawienie widoczności"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Próbowano przywrócić kopię zapasową Cura, nowszą od aktualnej wersji."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Tryb"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Widoczne ustawienie:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Znajdowanie nowej lokalizacji obiektów"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 poza %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Szukanie Lokalizacji"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Ładowanie projektu usunie wszystkie modele z platformy roboczej."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Nie można znaleźć lokalizacji w obrębie obszaru roboczego dla wszystkich obiektów"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Otwórz"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Nie można Znaleźć Lokalizacji"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Plugin post-processingu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Logowanie nie powiodło się"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Skrypty post-processingu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Zewnętrzna ściana"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Dodaj skrypt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Ściany wewnętrzne"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
-msgctxt "@label"
-msgid "Settings"
-msgstr "Ustawienia"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Skin"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Wypełnienie"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Wypełnienie podpór"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Konwertuj obraz ..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Łączenie podpory"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Maksymalna odległość każdego piksela od \"Bazy.\""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Podpory"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Wysokość (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Obwódka"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Wysokość podstawy od stołu w milimetrach."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Wieża czyszcząca"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Baza (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Ruch jałowy"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Szerokość w milimetrach na stole."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Retrakcja"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Szerokość (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Inny"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Głębokość w milimetrach na stole"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Grupa #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Głębokość (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Dla litofanów ciemne piksele powinny odpowiadać grubszym miejscom, aby zablokować więcej światła. Dla zaznaczenia wysokości map, jaśniejsze piksele oznaczają wyższy teren, więc jaśniejsze piksele powinny odpowiadać wyższym położeniom w wygenerowanym modelu 3D."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Ciemniejsze jest wyższe"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Zamknij"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Jaśniejszy jest wyższy"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Dodaj"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Anuluj"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Następny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Wysokość obszaru roboczego została zmniejszona ze względu na wartość ustawienia Print Sequence (Sekwencja wydruku), aby zapobiec kolizji z wydrukowanymi modelami."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Obszar Roboczy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Ilość wygładzania do zastosowania do obrazu."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "Plik już istnieje"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Wygładzanie"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Plik <filename>{0}</filename> już istnieje. Czy na pewno chcesz go nadpisać?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "Nieprawidłowy adres URL pliku:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Proszę wybrać ulepszenia wykonane w tym Ultimaker Original"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Niewspierany"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Płyta grzewcza (zestaw oficjalny lub własnej roboty)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Domyślne"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Poziomowanie stołu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Ustawienia zostały zmienione w celu dopasowania do bieżącej dostępności ekstruderów:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Aby upewnić się, że wydruki będą wychodziły świetne, możesz teraz wyregulować stół. Po kliknięciu przycisku \"Przejdź do następnego położenia\" dysza będzie się poruszać do różnych pozycji, które można wyregulować."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Ustawienia zostały zaaktualizowane"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Dla każdej pozycji; Włóż kartkę papieru pod dyszę i wyreguluj wysokość stołu roboczego. Wysokość stołu jest prawidłowa, gdy papier stawia lekki opór."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Ekstruder(y) wyłączony(/e)"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Rozpocznij poziomowanie stołu roboczego"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Nie udało się wyeksportować profilu do <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Przejdź do następnego położenia"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Nie można eksportować profilu do <filename>{0}</filename>: Wtyczka pisarza zgłosiła błąd."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Wiećej informacji o zbieraniu anonimowych danych"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Wyeksportowano profil do <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkowania. Poniżej znajduje się przykład wszystkich udostępnianych danych:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Eksport udany"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Nie chcę wysyłać anonimowych danych"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Nie powiódł się import profilu z <filename>{0}</filename>: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Pozwól na wysyłanie anonimowych danych"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Nie można importować profilu z <filename>{0}</filename> przed dodaniem drukarki."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Brak niestandardowego profilu do importu w pliku <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Należy uruchomić ponownie Cura, aby zmiany w pakietach przyniosły efekt."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Nie powiódł się import profilu z <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Profil <filename>{0}</filename> zawiera błędne dane, nie można go importować."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Błąd importu profilu z <filename>{0}</filename>:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Instaluj"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "Plik {0} nie zawiera żadnego poprawnego profilu."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Zainstalowane"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Profil {0} ma nieznany typ pliku lub jest uszkodzony."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
 msgctxt "@label"
-msgid "Premium"
+msgid "Custom profile"
+msgstr "Niestandardowy profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Profilowi brakuje typu jakości."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Zgodność"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Drukarka"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Zwielokrotnienie i umieszczanie przedmiotów"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Stół roboczy"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Umieść Obiekty"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Podpory"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Rozmieszczenie Obiektów"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Jakość"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Dane Techniczne"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Nie można uzyskać dostępu do serwera kont Ultimaker."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Dane Bezpieczeństwa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Wskazówki Drukowania"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Nie można odczytać odpowiedzi."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Strona Internetowa"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href=‚%1’>Zaloguj</a> aby zainstalować lub aktualizować"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href=‚%1’>Kup materiał na szpulach</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Proszę nadać wymagane uprawnienia podczas autoryzacji tej aplikacji."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Aktualizuj"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Coś nieoczekiwanego się stało, podczas próby logowania, spróbuj ponownie."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura nie może się uruchomić"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Ups, Ultimaker Cura natrafiła coś co nie wygląda dobrze.</p></b>\n"
+"                    <p>Natrafiliśmy na nieodwracalny błąd podczas uruchamiania. Prawdopodobnie jest to spowodowane błędem w plikach konfiguracyjnych. Zalecamy backup i reset konfiguracji.</p>\n"
+"                    <p>Backupy mogą być znalezione w folderze konfiguracyjnym.</p>\n"
+"                    <p>Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem.</p>\n"
+"              "
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Aktualizowanie"
+msgid "Send crash report to Ultimaker"
+msgstr "Wyślij raport błędu do Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Zaktualizowano"
+msgid "Show detailed crash report"
+msgstr "Pokaż szczegółowy raport błędu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Powrót"
+msgid "Show configuration folder"
+msgstr "Pokaż folder konfiguracyjny"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Wtyczki"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
+msgctxt "@action:button"
+msgid "Backup and Reset Configuration"
+msgstr "Zrób Backup i Zresetuj Konfigurację"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiał"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Raport Błędu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Zainstalowano"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Wystąpił błąd krytyczny. Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem</p></b>\n"
+"            <p>Proszę użyj przycisku \"Wyślij raport\", aby wysłać raport błędu automatycznie na nasze serwery</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Zostanie zainstalowane po ponownym uruchomieniu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Informacje o systemie"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Zaloguj</a> aby aktualizować"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Nieznany"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Zainstaluj poprzednią wersję"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Wersja Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Odinstaluj"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
+msgctxt "@label"
+msgid "Cura language"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Udział Społeczności"
+msgid "OS language"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Platforma"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Wtyczki Społeczności"
+msgid "Qt version"
+msgstr "Wersja Qt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiały Podstawowe"
+msgid "PyQt version"
+msgstr "Wersja PyQt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Uzyskiwanie pakietów..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Website"
-msgstr "Strona internetowa"
+msgid "Not yet initialized<br/>"
+msgstr "Jeszcze nie uruchomiono<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
-msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>Wersja OpenGL: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>Wydawca OpenGL: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
-msgctxt "@label"
-msgid "Version"
-msgstr "Wersja"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Ostatnia aktualizacja"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Śledzenie błedu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marka"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Logi"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Pobrań"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Wyślij raport"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
 msgstr ""
+"Upewnij się, że drukarka ma połączenie:\n"
+"- Sprawdź, czy drukarka jest włączona.\n"
+"- Sprawdź, czy drukarka jest podłączona do sieci.\n"
+"- Sprawdź, czy jesteś zalogowany, aby znaleźć drukarki podłączone do chmury."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
 msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr ""
+msgid "Please connect your printer to the network."
+msgstr "Podłącz drukarkę do sieci."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Pokaż instrukcję użytkownika online"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "No material has been installed."
+msgid "In order to monitor your print from Cura, please connect the printer."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Wybierz Ustawienia, aby dostosować ten model"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtr..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Nie można połączyć się z bazą danych pakietów Cura. Sprawdź swoje połączenie z internetem."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Pokaż wszystko"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr ""
+msgid "Mesh Type"
+msgstr "Typ siatki"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
+msgctxt "@label"
+msgid "Normal model"
+msgstr "Normalny model"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Dalej"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
+msgctxt "@label"
+msgid "Print as support"
+msgstr "Drukuj jako podpora"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr ""
+msgid "Modify settings for overlaps"
+msgstr "Modyfikuj ustawienia nakładania"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr ""
+msgid "Don't support overlaps"
+msgstr "Nie wspieraj nałożenia"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Potwierdź deinstalację"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Odinstalowujesz materiały i/lub profile, które są aktualnie używane. Zatwierdzenie spowoduje przywrócenie bieżących ustawień materiału/profilu do ustawień domyślnych."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiały"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "Wybierz ustawienia"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Aktualizacja Oprogramowania Sprzętowego"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Potwierdź"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
+msgctxt "@label"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "Oprogramowanie ukłądowe jest częścią oprogramowania działającego bezpośrednio na drukarce 3D. Oprogramowanie to steruje silnikami krokowymi, reguluje temperaturę i ostatecznie sprawia, że drukarka działa."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Schemat kolorów"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "Oprogramowanie ukłądowe dostarczane z nowymi drukarkami działa, ale nowe wersje mają zazwyczaj więcej funkcji i ulepszeń."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Kolor materiału"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Automatycznie uaktualnij oprogramowanie"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Rodzaj linii"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Prześlij niestandardowe oprogramowanie"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ nie ma połączenia z drukarką."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ połączenie z drukarką nie wspiera usługi."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Wybierz niestandardowe oprogramowanie"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Aktualizacja oprogramowania układowego"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Tryb zgodności"
+msgid "Updating firmware."
+msgstr "Aktualizowanie oprogramowania."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Travels"
-msgstr "Ruchy"
+msgid "Firmware update completed."
+msgstr "Aktualizacja oprogramowania zakończona."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Pomoce"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Aktualizacja oprogramowania nie powiodła się z powodu nieznanego błędu."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Shell"
-msgstr "Obrys"
+msgid "Firmware update failed due to an communication error."
+msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu komunikacji."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Infill"
-msgstr "Wypełnienie"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu wejścia / wyjścia."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Starts"
-msgstr ""
+msgid "Firmware update failed due to missing firmware."
+msgstr "Aktualizacja oprogramowania nie powiodła się z powodu utraconego oprogramowania."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Pokaż tylko najwyższe warstwy"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Anulowano"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Pokaż 5 Szczegółowych Warstw"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Zakończono"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Góra/ Dół"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Przygotowyję..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Wewnętrzna ściana"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Przerywanie..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "max"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Zatrzymywanie..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Wstrzymana"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Przywracanie..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Konieczne są działania"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Zakończone %1 z %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Zarządzaj drukarkami"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Szkło"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Zaktualizuj oprogramowanie drukarki, aby zdalnie zarządzać kolejką."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Wczytywanie..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Niedostępne"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Nieosiągalna"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Zajęta"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Przygotowyję..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Drukowanie"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Bez tytułu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonimowa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Wymaga zmian konfiguracji"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Szczegóły"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Drukarka niedostępna"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Pierwsza dostępna"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "W kolejce"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Zarządzaj w przeglądarce"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "W kolejce nie ma zadań drukowania. Potnij i wyślij zadanie, aby dodać."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Zadania druku"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Łączny czas druku"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Oczekiwanie na"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Drukuj przez sieć"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Drukuj"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Wybór drukarki"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Zmiany konfiguracji"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Nadpisz"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "Przypisana drukarka, %1, wymaga następującej zmiany konfiguracji:"
 msgstr[1] "Przypisana drukarka, %1, wymaga następujących zmian konfiguracji:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "Drukarka %1 jest przypisana, ale zadanie zawiera nieznaną konfigurację materiału."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Zmień materiał %1 z %2 na %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "Załaduj %3 jako materiał %1 (Nie można nadpisać)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Zmień rdzeń drukujący %1 z %2 na %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Zmień stół na %1 (Nie można nadpisać)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Nadpisanie spowoduje użycie określonych ustawień w istniejącej konfiguracji drukarki. Może to spowodować niepowodzenie druku."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Aluminum"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Zakończono"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Przerywanie..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Anulowano"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Zatrzymywanie..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Wstrzymana"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Przywracanie..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Drukuj przez sieć"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Konieczne są działania"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Drukuj"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Zakończone %1 z %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Wybór drukarki"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Połącz się z drukarką sieciową"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Aby drukować bezpośrednio na drukarce przez sieć, upewnij się, że drukarka jest podłączona do sieci za pomocą kabla sieciowego lub do sieci WIFI. Jeśli nie podłączysz Cury do drukarki, możesz nadal używać napędu USB do przesyłania plików G-Code do drukarki."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Wybierz swoją drukarkę z poniższej listy:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Edycja"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Usunąć"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Odśwież"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Jeżeli twojej drukarki nie ma na liście, przeczytaj <a href='%1'>poradnik o problemach z drukowaniem przez sieć</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Rodzaj"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Wersja oprogramowania"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adres"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Ta drukarka nie jest skonfigurowana jako host dla grupy drukarek."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Ta drukarka jest hostem grupy %1 drukarek."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Połącz"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Nieprawidłowy adres IP"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Proszę podać poprawny adres IP."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Adres drukarki"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Wprowadź adres IP drukarki."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Drukarka niedostępna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "Pierwsza dostępna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Przesuń na początek"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Usuń"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Ponów"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Zatrzymywanie..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Przywracanie..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Wstrzymaj"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Przerywanie..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Anuluj"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Czy jesteś pewien, że chcesz przesunąć %1 na początek kolejki?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Przesuń zadanie drukowania na początek"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Czy jesteś pewien, że chcesz usunąć %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Usuń zadanie drukowania"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Czy jesteś pewien, że chcesz anulować %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Anuluj wydruk"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "W kolejce"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Zarządzaj w przeglądarce"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "W kolejce nie ma zadań drukowania. Potnij i wyślij zadanie, aby dodać."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Zadania druku"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Łączny czas druku"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Oczekiwanie na"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Schemat kolorów"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Kolor materiału"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Rodzaj linii"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
 msgstr ""
-"Upewnij się, że drukarka ma połączenie:\n"
-"- Sprawdź, czy drukarka jest włączona.\n"
-"- Sprawdź, czy drukarka jest podłączona do sieci.\n"
-"- Sprawdź, czy jesteś zalogowany, aby znaleźć drukarki podłączone do chmury."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Podłącz drukarkę do sieci."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Pokaż instrukcję użytkownika online"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Tryb zgodności"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Ruchy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Pomoce"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Obrys"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Wypełnienie"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Pokaż tylko najwyższe warstwy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Pokaż 5 Szczegółowych Warstw"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Góra/ Dół"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Wewnętrzna ściana"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "min"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "max"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Wysokość (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Niektóre rzeczy mogą być problematyczne podczas tego wydruku. Kliknij, aby zobaczyć porady dotyczące regulacji."
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Maksymalna odległość każdego piksela od \"Bazy.\""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Baza (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Widok 3D"
+msgid "The base height from the build plate in millimeters."
+msgstr "Wysokość podstawy od stołu w milimetrach."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Szerokość (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Widok z przodu"
+msgid "The width in millimeters on the build plate"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Głębokość (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Widok z góry"
+msgid "The depth in millimeters on the build plate"
+msgstr "Głębokość w milimetrach na stole"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Ciemniejsze jest wyższe"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Jaśniejszy jest wyższy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Widok z lewej strony"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Dla litofanów ciemne piksele powinny odpowiadać grubszym miejscom, aby zablokować więcej światła. Dla zaznaczenia wysokości map, jaśniejsze piksele oznaczają wyższy teren, więc jaśniejsze piksele powinny odpowiadać wyższym położeniom w wygenerowanym modelu 3D."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Widok z prawej strony"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Lista obiektów"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Wygładzanie"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Ilość wygładzania do zastosowania do obrazu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marketplace"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Plik"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Otwórz projekt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Edytuj"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Zaktualizuj istniejące"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Widok"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Utwórz nowy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "Opcje"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Podsumowanie - Projekt Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "&Rozszerzenia"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Jak powinny być rozwiązywane błędy w maszynie?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Preferencje"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Ustawienia drukarki"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "P&omoc"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Typ"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nowy projekt"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Grupa drukarek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Czy na pewno chcesz rozpocząć nowy projekt? Spowoduje to wyczyszczenie stołu i niezapisanych ustawień."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Jak powinien zostać rozwiązany problem z profilem?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Cięcie..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Ustawienia profilu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Nie można pociąć"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nazwa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Cel"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Nie w profilu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 nadpisanie"
+msgstr[1] "%1 Zastępuje"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Pochodna z"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 nadpisanie"
+msgstr[1] "%1, %2 zastępuje"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Jak powinien zostać rozwiązany problem z materiałem?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Ustawienia materiału"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Ustawienie widoczności"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Tryb"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Widoczne ustawienie:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 poza %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Ładowanie projektu usunie wszystkie modele z platformy roboczej."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Otwórz"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Przetwarzanie"
+msgid "Want more?"
+msgstr "Chcesz więcej?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Potnij"
+msgid "Backup Now"
+msgstr "Utwórz kopię zapasową"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Rozpocznij proces cięcia"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatyczne tworzenie kopii zapasowej"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Automatycznie twórz kopie zapasowe każdego dnia, w którym uruchomiono Curę."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Wersja Cura"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Drukarki"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiały"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Pluginy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Anuluj"
+msgid "Restore"
+msgstr "Przywróć"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Szacunkowy czas"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Usuń kopię zapasową"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Szacunkowy materiał"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Czy na pewno chcesz usunąć tę kopię zapasową? Tej czynności nie można cofnąć."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Przywróć kopię zapasową"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Musisz zrestartować Curę przed przywróceniem kopii zapasowej. Czy chcesz teraz zamknąć Curę?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Wykonaj kopię zapasową i zsynchronizuj ustawienia Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Zaloguj"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Moje Kopie Zapasowe"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Nie masz żadnych kopii zapasowych. Użyj przycisku „Utwórz kopię zapasową”, aby go utworzyć."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Podczas fazy podglądu będziesz ograniczony do 5 widocznych kopii zapasowych. Usuń kopię zapasową, aby zobaczyć starsze."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Kopie zapasowe cura"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Wiećej informacji o zbieraniu anonimowych danych"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkowania. Poniżej znajduje się przykład wszystkich udostępnianych danych:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Nie chcę wysyłać anonimowych danych"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Pozwól na wysyłanie anonimowych danych"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Plugin post-processingu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Szacunkowy czas niedostępny"
+msgid "Post Processing Scripts"
+msgstr "Skrypty post-processingu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Dodaj skrypt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Szacunkowy koszt niedostępny"
+msgid "Settings"
+msgstr "Ustawienia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Podgląd"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a printer"
-msgstr "Dodaj drukarkę"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Proszę wybrać ulepszenia wykonane w tym Ultimaker Original"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Dodaj drukarkę sieciową"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Płyta grzewcza (zestaw oficjalny lub własnej roboty)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Poziomowanie stołu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Dodaj drukarkę niesieciową"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Aby upewnić się, że wydruki będą wychodziły świetne, możesz teraz wyregulować stół. Po kliknięciu przycisku \"Przejdź do następnego położenia\" dysza będzie się poruszać do różnych pozycji, które można wyregulować."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "Add a Cloud printer"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Dla każdej pozycji; Włóż kartkę papieru pod dyszę i wyreguluj wysokość stołu roboczego. Wysokość stołu jest prawidłowa, gdy papier stawia lekki opór."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Rozpocznij poziomowanie stołu roboczego"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Przejdź do następnego położenia"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
+msgid "Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Dodaj drukarkę przez IP"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Dodaj"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Nie można połączyć się z urządzeniem."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
+msgid "By"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Ta drukarka nie może zostać dodana, ponieważ jest nieznana lub nie jest hostem grupy."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Wstecz"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Połącz"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Umowa z użytkownikiem"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Odrzuć i zamknij"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Witaj w Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Rozpocznij"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgid "Please read and agree with the plugin licence."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Drukarka"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Ustawienia dyszy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Producent"
+msgid "Nozzle size"
+msgstr "Rozmiar dyszy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr ""
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Nazwa drukarki"
+msgid "Compatible material diameter"
+msgstr "Kompatybilna średnica materiału"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Korekcja dyszy X"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Nie znaleziono drukarki w Twojej sieci."
+msgid "Nozzle offset Y"
+msgstr "Korekcja dyszy Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Odśwież"
+msgid "Cooling Fan Number"
+msgstr "Numer Wentylatora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Początkowy G-code ekstrudera"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Końcowy G-code ekstrudera"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Ustawienia drukarki"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Dodaj drukarkę przez IP"
+msgid "X (Width)"
+msgstr "X (Szerokość)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr ""
+msgid "Y (Depth)"
+msgstr "Y (Głębokość)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Rozwiązywanie problemów"
+msgid "Z (Height)"
+msgstr "Z (Wysokość)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Pomóż nam ulepszyć Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "Kształt stołu roboczego"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkownika, w tym:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Początek na środku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Typy maszyn"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Podgrzewany stół"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Zużycie materiału"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Grzany obszar roboczy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Ilość warstw"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Wersja G-code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Ustawienia druku"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Ustawienia głowicy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Dane zebrane przez Ultimaker Cura nie będą zawierać żadnych prywatnych danych osobowych."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Więcej informacji"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr ""
+msgid "X max"
+msgstr "X max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Pusty"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
+msgid "Gantry Height"
+msgstr "Wysokość wózka"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Liczba ekstruderów"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Początkowy G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Końcowy G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Drukuj Wybrany Model z %1"
+msgstr[1] "Drukuj Wybrane Modele z %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "Opcje"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nowy projekt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Czy na pewno chcesz rozpocząć nowy projekt? Spowoduje to wyczyszczenie stołu i niezapisanych ustawień."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marketplace"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Stół roboczy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "Temperatura docelowa podgrzewanego stołu. Stół rozgrzeje się lub schłodzi w kierunku tej temperatury. Jeśli ustawione jest 0, grzanie stołu jest wyłączone."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "Bieżąca temperatura podgrzewanego stołu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "Temperatura do wstępnego podgrzewania stołu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Anuluj"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Podgrzewanie wstępne"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Przed drukowaniem podgrzej stół. W dalszym ciągu można dostosowywać druk podczas nagrzewania, a nie będziesz musiał czekać na rozgrzanie stołu, gdy będziesz gotowy do drukowania."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "Drukarka nie jest podłączona."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Kontrola drukarką"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Pozycja Swobodnego Ruchu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Dystans Swobodnego Ruchu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Wyślij G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Wyślij niestandardową komendę G-code do podłączonej drukarki. Naciśnij 'enter', aby wysłać komendę."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Ekstruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Docelowa temperatura głowicy. Głowica będzie się rozgrzewać lub chłodzić do tej temperatury. Jeżeli jest równe 0, grzanie głowicy będzie wyłączone."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Aktualna temperatura tej głowicy."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "Temperatura do wstępnego podgrzewania głowicy."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Podgrzej głowicę przed drukowaniem. Możesz w dalszym ciągu dostosowywać drukowanie podczas podgrzewania i nie będziesz musiał czekać na podgrzanie głowicy kiedy będziesz gotowy."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Kolor materiału w tym ekstruderze."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Materiał w głowicy drukującej."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "Dysza włożona do tego ekstrudera."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Otwórz plik projektu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Jest to plik projektu Cura. Czy chcesz otworzyć go jako projekt, czy zaimportować z niego modele?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Zapamiętaj mój wybór"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Otwórz jako projekt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importuj modele"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Zapisz projekt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Ekstruder %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & materiał"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Materiał"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Nie pokazuj podsumowania projektu podczas ponownego zapisywania"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Zapisz"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Otwórz plik(i)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Znaleziono jeden lub więcej plików projektu w wybranych plikach. Możesz otwierać tylko jeden plik projektu na raz. Proponujemy importowanie tylko modeli z tych plików. Czy chcesz kontynuować?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Importuj wszystkie jako modele"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "version: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Kompletne rozwiązanie do druku przestrzennego."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3751,2220 +3586,2380 @@ msgstr ""
 "Cura jest rozwijana przez firmę Ultimaker B.V. we współpracy ze społecznością.\n"
 "Cura z dumą korzysta z następujących projektów open source:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Graficzny interfejs użytkownika"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Struktura aplikacji"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Generator g-code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Biblioteka komunikacji międzyprocesowej"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Język programowania"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Framework GUI"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Powiązania Frameworka GUI"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Biblioteka Powiązań C/C++"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Format wymiany danych"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Wsparcie biblioteki do obliczeń naukowych"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Wsparcie biblioteki dla szybszej matematyki"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Wsparcie biblioteki do obsługi plików STL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Biblioteka pomocnicza do obsługi obiektów płaskich"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Biblioteka pomocnicza do obsługi siatek trójkątów"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Wsparcie biblioteki do obsługi plików 3MF"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Biblioteka pomocy dla metadanych plików i przesyłania strumieniowego"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Biblioteka komunikacji szeregowej"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Bilbiotek poszukująca Zeroconf"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Biblioteka edytująca pola"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Czcionka"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Ikony SVG"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Wdrożenie aplikacji pomiędzy dystrybucjami Linux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Otwórz plik(i)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Znaleziono jeden lub więcej plików projektu w wybranych plikach. Możesz otwierać tylko jeden plik projektu na raz. Proponujemy importowanie tylko modeli z tych plików. Czy chcesz kontynuować?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Importuj wszystkie jako modele"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Zapisz projekt"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Ekstruder %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & materiał"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Materiał"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Nie pokazuj podsumowania projektu podczas ponownego zapisywania"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Zapisz"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Odrzuć lub zachowaj zmiany"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Ustawienia profilu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Zawsze pytaj o to"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Odrzuć i nigdy nie pytaj"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Zachowaj i nigdy nie pytaj"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Otwórz plik projektu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Jest to plik projektu Cura. Czy chcesz otworzyć go jako projekt, czy zaimportować z niego modele?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Zapamiętaj mój wybór"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Otwórz &ostatnio używane"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Otwórz jako projekt"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Widoczne Ustawienia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importuj modele"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Ustaw Widoczność Ustawień..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiał"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Ustaw jako aktywną głowicę"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Włącz Ekstruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Wyłącz Ekstruder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiał"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Ulubione"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Podstawowe"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "P&omoc"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Plik"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Eksportuj..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Eksportuj Zaznaczenie..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Preferencje"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Edytuj"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Drukarka"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Drukarki dostępne w sieci"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Drukarki lokalne"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "&Rozszerzenia"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfiguracje"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Aktywny wydruk"
+msgid "Loading available configurations from the printer..."
+msgstr "Ładowanie dostępnych konfiguracji z drukarki..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Nazwa pracy"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Konfiguracje są niedostępne, ponieważ drukarka jest odłączona."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Czas druku"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Ta konfiguracja jest niedostępna, ponieważ %1 jest nierozpoznany. Przejdź do %2, aby pobrać prawidłowy profil materiału."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Szacowany czas pozostały"
+msgid "Marketplace"
+msgstr "Marketplace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Wybierz konfigurację"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfiguracje"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Dodaj drukarkę"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Niestandardowe"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Zarządzaj drukarkami"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Drukarka"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Podłączone drukarki"
+msgid "Enabled"
+msgstr "Włączona"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Zdefiniowane drukarki"
+msgid "Material"
+msgstr "Materiał"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Ustawienia druku"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Użyj kleju dla lepszej przyczepności dla tej kombinacji materiałów."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Wydrukuj wybrany model z:"
+msgstr[1] "Wydrukuj wybrane modele z:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Zduplikuj wybrany model"
+msgstr[1] "Zduplikuj wybrane modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
+msgid "Number of Copies"
+msgstr "Liczba kopii"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Widok"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Pozycja kamery"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Widok z kamery"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspektywiczny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Rzut ortograficzny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Typ widoku"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Niektóre wartości ustawień różnią się od wartości zapisanych w profilu.\n"
-"\n"
-"Kliknij, aby otworzyć menedżer profili."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Profile niestandardowe"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Odrzuć bieżące zmiany"
+msgid "Sign in"
+msgstr "Zaloguj"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Polecane"
+msgid "Ultimaker Account"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Niestandardowe"
+msgid "Sign Out"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Cięcie..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Nie można pociąć"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Przetwarzanie"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Potnij"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Rozpocznij proces cięcia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Anuluj"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Szacunkowy czas"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Szacunkowy materiał"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Szacunkowy czas niedostępny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Szacunkowy koszt niedostępny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Podgląd"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Ten pakiet zostanie zainstalowany po ponownym uruchomieniu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Ogólny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Ustawienia"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Drukarki"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiał"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Instaluj pakiety"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Otwórz plik(i)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Znaleziono jeden lub więcej plików G-code w wybranych plikach. Możesz otwierać tylko jeden plik G-code jednocześnie. Jeśli chcesz otworzyć plik G-code, proszę wybierz tylko jeden."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Dodaj drukarkę"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Co nowego"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Wł"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Wył"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Eksperymentalne"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Ustawienia druku"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Polecane"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Niestandardowe"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "Nie ma profilu %1 dla konfiguracji w ekstruderze %2. Zamiast tego zostaną użyte domyślne cale"
 msgstr[1] "Nie ma profilu %1 dla konfiguracji w ekstruderach %2. Zamiast tego zostaną użyte domyślne cale"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profile"
+msgid "Gradual infill"
+msgstr "Stopniowe wypełnienie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Zmodyfikowałeś ustawienia profilu. Jeżeli chcesz je zmienić, przejdź do trybu niestandardowego."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Stopniowe wypełnienie stopniowo zwiększa ilość wypełnień w górę."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Podpory"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Generuje podpory wspierające części modelu, które mają zwis. Bez tych podpór takie części mogłyby spaść podczas drukowania."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Stopniowe wypełnienie"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Stopniowe wypełnienie stopniowo zwiększa ilość wypełnień w górę."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Zmodyfikowałeś ustawienia profilu. Jeżeli chcesz je zmienić, przejdź do trybu niestandardowego."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Przyczepność"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Włącz drukowanie obrysu lub tratwy. Spowoduje to dodanie płaskiej powierzchni wokół lub pod Twoim obiektem, która jest łatwa do usunięcia po wydruku."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Profile niestandardowe"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Drukarki dostępne w sieci"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Odrzuć bieżące zmiany"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Drukarki lokalne"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiał"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Niektóre wartości ustawień różnią się od wartości zapisanych w profilu.\n"
+"\n"
+"Kliknij, aby otworzyć menedżer profili."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Ulubione"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Ustawienie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Podstawowe"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Wydrukuj wybrany model z:"
-msgstr[1] "Wydrukuj wybrane modele z:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Aktualny"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Zduplikuj wybrany model"
-msgstr[1] "Zduplikuj wybrane modele"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Liczba kopii"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Eksportuj..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Eksportuj Zaznaczenie..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Widoczność ustawienia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfiguracje"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Niestandardowe"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Zaznacz wszystko"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktywuj"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Zmień nazwę"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Potwierdź Zmianę Średnicy"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Średnica nowego filamentu została ustawiona na %1mm, i nie jest kompatybilna z bieżącym ekstruderem. Czy chcesz kontynuować?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Drukarka"
+msgid "Display Name"
+msgstr "Wyświetlana nazwa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Włączona"
+msgid "Brand"
+msgstr "Marka"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiał"
+msgid "Material Type"
+msgstr "Typ Materiału"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Użyj kleju dla lepszej przyczepności dla tej kombinacji materiałów."
+msgid "Color"
+msgstr "Kolor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Właściwości"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Wybierz konfigurację"
+msgid "Density"
+msgstr "Gęstość"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfiguracje"
+msgid "Diameter"
+msgstr "Średnica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Ładowanie dostępnych konfiguracji z drukarki..."
+msgid "Filament Cost"
+msgstr "Koszt Filamentu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Konfiguracje są niedostępne, ponieważ drukarka jest odłączona."
+msgid "Filament weight"
+msgstr "Waga filamentu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Ta konfiguracja jest niedostępna, ponieważ %1 jest nierozpoznany. Przejdź do %2, aby pobrać prawidłowy profil materiału."
+msgid "Filament length"
+msgstr "Długość Filamentu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marketplace"
+msgid "Cost per Meter"
+msgstr "Koszt na metr"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Ten materiał jest powiązany z %1 i dzieli się niekórymi swoimi właściwościami."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Odłącz materiał"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Opis"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informacje dotyczące przyczepności"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Informacja"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Drukarka"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiał"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Ustaw jako aktywną głowicę"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Włącz Ekstruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Wyłącz Ekstruder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Otwórz &ostatnio używane"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Widoczne Ustawienia"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Ustaw Widoczność Ustawień..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Pozycja kamery"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Widok z kamery"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektywiczny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Rzut ortograficzny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "P&ole robocze"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Typ widoku"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profile"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktywuj"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Stwórz"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Wstecz"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplikuj"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Zmień nazwę"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Importuj"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Eksportuj"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Stwórz profil"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Podaj nazwę tego profilu."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplikuj"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplikuj profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Eksportuj"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Potwierdź Usunięcie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Czy na pewno chcesz usunąć %1? Nie można tego cofnąć!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Zmień nazwę profilu"
+msgid "Import Material"
+msgstr "Importuj Materiał"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importuj Profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Udało się zaimportować materiał <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Eksportuj Profil"
+msgid "Export Material"
+msgstr "Eksportuj Materiał"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Drukarka: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Udało się wyeksportować materiał do <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Aktualizuj profil z bieżącymi ustawieniami"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Ten profil używa ustawień domyślnych określonych przez drukarkę, dlatego nie ma żadnych ustawień z poniższej liście."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Aktualne ustawienia odpowiadają wybranemu profilowi."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Ustawienia ogólne"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Ogólny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Stwórz profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Podaj nazwę tego profilu."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Eksportuj Profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplikuj profil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Zmień nazwę profilu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importuj Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interfejs"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Waluta:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Motyw:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Musisz zrestartować aplikację, aby te zmiany zaczęły obowiązywać."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Tnij automatycznie podczas zmiany ustawień."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatyczne Cięcie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Zachowanie okna edycji"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Zaznacz nieobsługiwane obszary modelu na czerwono. Bez wsparcia te obszary nie będą drukowane prawidłowo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Wyświetl zwis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Przenosi kamerę, aby model był w centrum widoku, gdy wybrano model"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Wyśrodkuj kamerę kiedy przedmiot jest zaznaczony"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Czy domyślne zachowanie zoomu powinno zostać odwrócone?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Odwróć kierunek zoomu kamery."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Czy przybliżanie powinno poruszać się w kierunku myszy?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Powiększanie w kierunku myszy nie jest obsługiwane w danej perspektywie."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Przybliżaj w kierunku myszy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Czy modele na platformie powinny być przenoszone w taki sposób, aby nie przecinały się?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Upewnij się, że modele są oddzielone"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Czy modele na platformie powinny być przesunięte w dół, aby dotknęły stołu roboczego?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Automatycznie upuść modele na stół roboczy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Pokaż wiadomości ostrzegawcze w czytniku g-code."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Wiadomość ostrzegawcza w czytniku g-code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Czy warstwa powinna być wymuszona w trybie zgodności?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Wymuszenie widoku warstw w trybie zgodności (wymaga ponownego uruchomienia)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Czy Cura powinna się otwierać w miejscu, w którym została zamknięta?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Przywróć pozycję okna przy starcie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Jakiego rodzaju kamery należy użyć do renderowania?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Renderowanie z kamery:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Perspektywiczny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Rzut ortograficzny"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Otwieranie i zapisywanie plików"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Czy modele powinny być skalowane do wielkości obszaru roboczego, jeśli są zbyt duże?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Skaluj duże modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Model może wydawać się bardzo mały, jeśli jego jednostka jest na przykład w metrach, a nie w milimetrach. Czy takie modele powinny być skalowane?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Skaluj bardzo małe modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Czy modele powinny zostać zaznaczone po załadowaniu?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Zaznaczaj modele po załadowaniu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Czy przedrostek oparty na nazwie drukarki powinien być automatycznie dodawany do nazwy zadania?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Dodaj przedrostek maszyny do nazwy zadania"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Czy podsumowanie powinno być wyświetlane podczas zapisu projektu?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Pokaż okno podsumowania podczas zapisywaniu projektu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Domyślne zachowanie podczas otwierania pliku projektu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Domyślne zachowanie podczas otwierania pliku projektu: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Zawsze pytaj"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Zawsze otwieraj jako projekt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Zawsze importuj modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Kiedy dokonasz zmian w profilu i przełączysz się na inny, zostanie wyświetlone okno z pytaniem, czy chcesz zachować twoje zmiany, czy nie. Możesz też wybrać domyślne zachowanie, żeby to okno już nigdy nie było pokazywane."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Domyślne zachowanie dla zmienionych ustawień podczas zmiany profilu na inny: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Zawsze odrzucaj wprowadzone zmiany"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Zawsze przenoś wprowadzone zmiany do nowego profilu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Prywatność"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Czy anonimowe dane na temat wydruku mają być wysyłane do Ultimaker? Uwaga. Żadne modele, adresy IP, ani żadne inne dane osobiste nie będą wysyłane i/lub przechowywane."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Wyślij (anonimowe) informacje o drukowaniu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Więcej informacji"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Czy Cura ma sprawdzać dostępność aktualizacji podczas uruchamiania programu?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Sprawdź, dostępność aktualizacji podczas uruchamiania"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informacja"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Dodaj drukarkę przez IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Potwierdź Zmianę Średnicy"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Średnica nowego filamentu została ustawiona na %1mm, i nie jest kompatybilna z bieżącym ekstruderem. Czy chcesz kontynuować?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Dodaj"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Wyświetlana nazwa"
+msgid "Could not connect to device."
+msgstr "Nie można połączyć się z urządzeniem."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Typ Materiału"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Kolor"
+msgid "The printer at this address has not responded yet."
+msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Właściwości"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Ta drukarka nie może zostać dodana, ponieważ jest nieznana lub nie jest hostem grupy."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Gęstość"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Połącz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Średnica"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Koszt Filamentu"
+msgid "User Agreement"
+msgstr "Umowa z użytkownikiem"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Waga filamentu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Zgadzam się"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Długość Filamentu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Odrzuć i zamknij"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Koszt na metr"
+msgid "What's New"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
-msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Ten materiał jest powiązany z %1 i dzieli się niekórymi swoimi właściwościami."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Dalej"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Odłącz materiał"
+msgid "Add a Cloud printer"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Description"
-msgstr "Opis"
+msgid "Waiting for Cloud response"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informacje dotyczące przyczepności"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Stwórz"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplikuj"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
+msgid "No printers found in your account?"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Drukarka"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importuj Materiał"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Udało się zaimportować materiał <filename>%1</filename>"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Eksportuj Materiał"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Udało się wyeksportować materiał do <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
 msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgid "Backup and sync your material settings and plugins"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
 msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
+msgid "Skip"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Witaj w Ultimaker Cura"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
 msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
 msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr ""
+msgid "Get started"
+msgstr "Rozpocznij"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Pusty"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Producent"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
-msgid "Troubleshooting"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nazwa drukarki"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgid "Please name your printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Dodaj drukarkę"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Dodaj drukarkę sieciową"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Dodaj drukarkę niesieciową"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Nie znaleziono drukarki w Twojej sieci."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Odśwież"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Dodaj drukarkę przez IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
-msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Rozwiązywanie problemów"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Pomóż nam ulepszyć Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkownika, w tym:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Typy maszyn"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
 msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr ""
+msgid "Material usage"
+msgstr "Zużycie materiału"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
 msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr ""
+msgid "Number of slices"
+msgstr "Ilość warstw"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgid "Print settings"
+msgstr "Ustawienia druku"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Dane zebrane przez Ultimaker Cura nie będą zawierać żadnych prywatnych danych osobowych."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Więcej informacji"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lista obiektów"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Widoczność ustawienia"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Zaznacz wszystko"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Podłączone drukarki"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Drukarki"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Zdefiniowane drukarki"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Przeliczone"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Ustawienie"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Aktualny"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Jednostka"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Dodaj drukarkę"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Zarządzaj drukarkami"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Bez tytułu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Nie podłączono do drukarki"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "Drukarka nie akceptuje poleceń"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "W naprawie. Sprawdź drukarkę"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Utracone połączenie z drukarką"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Drukowanie..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Wstrzymano"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Przygotowywanie ..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Usuń wydruk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Anuluj Wydruk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Czy na pewno chcesz przerwać drukowanie?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Drukuj Wybrany Model z %1"
-msgstr[1] "Drukuj Wybrane Modele z %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
 msgstr ""
+"Niektóre ukryte ustawienia używają wartości różniących się od ich normalnej, obliczonej wartości.\n"
+"\n"
+"Kliknij, aby te ustawienia były widoczne."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Ustawienia wyszukiwania"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Skopiuj wartość do wszystkich ekstruderów"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Skopiuj wszystkie zmienione wartości do wszystkich ekstruderów"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Ukryj tę opcję"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Nie pokazuj tej opcji"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Kontrola drukarką"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Pozostaw tę opcję widoczną"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
-msgctxt "@label"
-msgid "Jog Position"
-msgstr "Pozycja Swobodnego Ruchu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Skonfiguruj widoczność ustawień ..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "To ustawienie nie jest używane, ponieważ wszystkie ustawienia, na które wpływa, są nadpisane."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Wpływać"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
-msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Dystans Swobodnego Ruchu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Pod wpływem"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Wyślij G-code"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Wyślij niestandardową komendę G-code do podłączonej drukarki. Naciśnij 'enter', aby wysłać komendę."
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "To ustawienie jest dzielone pomiędzy wszystkimi ekstruderami. Zmiana tutaj spowoduje zmianę dla wszystkich ekstruderów."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Ekstruder"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Docelowa temperatura głowicy. Głowica będzie się rozgrzewać lub chłodzić do tej temperatury. Jeżeli jest równe 0, grzanie głowicy będzie wyłączone."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Aktualna temperatura tej głowicy."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "Temperatura do wstępnego podgrzewania głowicy."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Anuluj"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Podgrzewanie wstępne"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Podgrzej głowicę przed drukowaniem. Możesz w dalszym ciągu dostosowywać drukowanie podczas podgrzewania i nie będziesz musiał czekać na podgrzanie głowicy kiedy będziesz gotowy."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Kolor materiału w tym ekstruderze."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Materiał w głowicy drukującej."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "Dysza włożona do tego ekstrudera."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "Drukarka nie jest podłączona."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Stół roboczy"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "Temperatura docelowa podgrzewanego stołu. Stół rozgrzeje się lub schłodzi w kierunku tej temperatury. Jeśli ustawione jest 0, grzanie stołu jest wyłączone."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "Bieżąca temperatura podgrzewanego stołu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "Temperatura do wstępnego podgrzewania stołu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Przed drukowaniem podgrzej stół. W dalszym ciągu można dostosowywać druk podczas nagrzewania, a nie będziesz musiał czekać na rozgrzanie stołu, gdy będziesz gotowy do drukowania."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Zaloguj"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
 msgstr ""
+"To ustawienie ma inną wartość niż w profilu.\n"
+"\n"
+"Kliknij, aby przywrócić wartość z profilu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Checking..."
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
+"To ustawienie jest zwykle obliczane, ale obecnie ma wartość bezwzględną.\n"
+"\n"
+"Kliknij, aby przywrócić wartość obliczoną."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Account synced"
+msgid "Hex"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr ""
+msgid "Active print"
+msgstr "Aktywny wydruk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr ""
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Nazwa pracy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Bez tytułu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Czas druku"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr ""
+msgid "Estimated time left"
+msgstr "Szacowany czas pozostały"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Pokaż przewodnik rozwiązywania problemów online"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Przełącz tryb pełnoekranowy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Wyłącz tryb pełnoekranowy"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Cofnij"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Ponów"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Zamknij"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "Widok 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Widok z przodu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Widok z góry"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Widok z lewej strony"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Widok z prawej strony"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Konfiguruj Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Dodaj drukarkę..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Zarządzaj drukarkami..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Zarządzaj materiałami..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Aktualizuj profil z bieżącymi ustawieniami"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Odrzuć bieżące zmiany"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&Utwórz profil z bieżących ustawień..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Zarządzaj profilami..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Pokaż dokumentację internetową"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Zgłoś błąd"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Co nowego"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "O..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Usuń model"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Wyśrodkuj model na platformie"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "&Grupuj modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Rozgrupuj modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "Połącz modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Powiel model..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Wybierz wszystkie modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Wyczyść stół"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Przeładuj wszystkie modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Rozłóż Wszystkie Modele na Wszystkie Platformy Robocze"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Ułóż wszystkie modele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Wybór ułożenia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Zresetuj wszystkie pozycje modelu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Zresetuj wszystkie przekształcenia modelu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Otwórz plik(i)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Nowy projekt..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Pokaż folder konfiguracji"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Skonfiguruj widoczność ustawień ..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marketplace"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "To ustawienie nie jest używane, ponieważ wszystkie ustawienia, na które wpływa, są nadpisane."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Wpływać"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Pod wpływem"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "To ustawienie jest dzielone pomiędzy wszystkimi ekstruderami. Zmiana tutaj spowoduje zmianę dla wszystkich ekstruderów."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"To ustawienie ma inną wartość niż w profilu.\n"
-"\n"
-"Kliknij, aby przywrócić wartość z profilu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"To ustawienie jest zwykle obliczane, ale obecnie ma wartość bezwzględną.\n"
-"\n"
-"Kliknij, aby przywrócić wartość obliczoną."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Ustawienia wyszukiwania"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Skopiuj wartość do wszystkich ekstruderów"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Skopiuj wszystkie zmienione wartości do wszystkich ekstruderów"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Ukryj tę opcję"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Nie pokazuj tej opcji"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Pozostaw tę opcję widoczną"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Niektóre ukryte ustawienia używają wartości różniących się od ich normalnej, obliczonej wartości.\n"
-"\n"
-"Kliknij, aby te ustawienia były widoczne."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Ten pakiet zostanie zainstalowany po ponownym uruchomieniu."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Ustawienia"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr ""
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Instaluj pakiety"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Widok 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Otwórz plik(i)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Widok z przodu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Znaleziono jeden lub więcej plików G-code w wybranych plikach. Możesz otwierać tylko jeden plik G-code jednocześnie. Jeśli chcesz otworzyć plik G-code, proszę wybierz tylko jeden."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Widok z góry"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Dodaj drukarkę"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Widok z lewej strony"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Co nowego"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Widok z prawej strony"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Zapewnia Ustawienia dla Każdego Modelu."
+msgid "Provides a prepare stage in Cura."
+msgstr "Zapewnia etap przygotowania w Cura."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Narzędzie Ustawień dla Każdego Modelu"
+msgid "Prepare Stage"
+msgstr "Etap Przygotowania"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Zapewnia wsparcie dla importowania profili Cura."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Zapewnia wsparcie dla eksportowania profili Cura."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Czytnik Profili Cura"
+msgid "Cura Profile Writer"
+msgstr "Cura Profile Writer"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Zapewnia możliwość czytania plików X3D."
+msgid "Provides support for reading model files."
+msgstr "Zapewnia wsparcie dla czytania plików modeli."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "Czytnik X3D"
+msgid "Trimesh Reader"
+msgstr "Czytnik siatki trójkątów"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Utwórz kopię zapasową i przywróć konfigurację."
+msgid "Checks for firmware updates."
+msgstr "Sprawdź aktualizacje oprogramowania."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Kopie zapasowe Cura"
+msgid "Firmware Update Checker"
+msgstr "Sprawdzacz Aktualizacji Oprogramowania"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Zapewnia możliwość zmiany ustawień maszyny (takich jak objętość robocza, rozmiar dyszy itp.)."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr ""
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
+msgid "Sentry Logger"
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Tworzy siatkę do blokowania drukowania podpór w określonych miejscach"
+msgid "Provides a monitor stage in Cura."
+msgstr "Zapewnia etap monitorowania w Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Usuwacz Podpór"
+msgid "Monitor Stage"
+msgstr "Etap Monitorowania"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5976,105 +5971,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Wtyczka Urządzenia Wyjścia Dysku Zewnętrznego"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Dostarcza działanie, pozwalające na aktualizację oprogramowania sprzętowego."
+msgid "Provides support for reading AMF files."
+msgstr "Zapewnia wsparcie dla czytania plików AMF."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Aktualizacja oprogramowania sprzętowego"
+msgid "AMF Reader"
+msgstr "Czytnik AMF"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Zapewnia wsparcie dla importowania profili ze starszych wersji Cura."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Zapewnia obsługę odczytu pakietów formatu Ultimaker."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Czytnik Profili Starszej Cura"
+msgid "UFP Reader"
+msgstr "Czytnik UFP"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Zapewnia wsparcie dla czytania plików 3MF."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr ""
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Czytnik 3MF"
+msgid "Ultimaker Digital Library"
+msgstr ""
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Zapewnia wsparcie dla zapisywania Pakietów Formatów Ultimaker."
+msgid "Provides the Per Model Settings."
+msgstr "Zapewnia Ustawienia dla Każdego Modelu."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "Zapisywacz UFP"
+msgid "Per Model Settings Tool"
+msgstr "Narzędzie Ustawień dla Każdego Modelu"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr ""
+msgid "Provides a machine actions for updating firmware."
+msgstr "Dostarcza działanie, pozwalające na aktualizację oprogramowania sprzętowego."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr ""
+msgid "Firmware Updater"
+msgstr "Aktualizacja oprogramowania sprzętowego"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Zapewnia wsparcie dla importowania profili z plików g-code."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Zarządza połączeniami z sieciowymi drukarkami Ultimaker."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Czytnik Profili G-code"
+msgid "Ultimaker Network Connection"
+msgstr "Połączenie sieciowe Ultimaker"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Dostarcza podgląd w Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Sprawdza możliwe problemy drukowania modeli i konfiguracji wydruku i podaje porady."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Podgląd"
+msgid "Model Checker"
+msgstr "Sprawdzacz Modelu"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Zapewnia widok rentgena."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Widok Rentgena"
+msgid "Simulation View"
+msgstr "Widok Symulacji"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Zapewnia połączenie z tnącym zapleczem CuraEngine."
+msgid "Writes g-code to a file."
+msgstr "Zapisuje g-code do pliku."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Zaplecze CuraEngine"
+msgid "G-code Writer"
+msgstr "Zapisywacz G-code"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Zapewnia wsparcie dla czytania plików AMF."
+msgid "Provides support for writing 3MF files."
+msgstr "Zapewnia wsparcie dla tworzenia plików 3MF."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Czytnik AMF"
+msgid "3MF Writer"
+msgstr "3MF Writer"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6086,175 +6081,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Czytnik Skompresowanego G-code"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Dodatek, który pozwala użytkownikowi tworzenie skryptów do post processingu"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Zapewnia możliwość czytania i tworzenia profili materiałów opartych o XML."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Post Processing"
+msgid "Material Profiles"
+msgstr "Profile Materiału"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Zapewnia wsparcie dla eksportowania profili Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Zapewnia połączenie z tnącym zapleczem CuraEngine."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura Profile Writer"
+msgid "CuraEngine Backend"
+msgstr "Zaplecze CuraEngine"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Akceptuje G-Code i wysyła je do drukarki. Wtyczka może też aktualizować oprogramowanie."
+msgid "Provides support for reading X3D files."
+msgstr "Zapewnia możliwość czytania plików X3D."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Drukowanie USB"
+msgid "X3D Reader"
+msgstr "Czytnik X3D"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Zapewnia etap przygotowania w Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Włącza możliwość generowania drukowalnej geometrii z pliku obrazu 2D."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Etap Przygotowania"
+msgid "Image Reader"
+msgstr "Czytnik Obrazu"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Pozwala na ładowanie i wyświetlanie plików G-code."
+msgid "Provides support for reading 3MF files."
+msgstr "Zapewnia wsparcie dla czytania plików 3MF."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Czytnik G-code"
+msgid "3MF Reader"
+msgstr "Czytnik 3MF"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Włącza możliwość generowania drukowalnej geometrii z pliku obrazu 2D."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Zapewnia wsparcie dla zapisywania Pakietów Formatów Ultimaker."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Czytnik Obrazu"
+msgid "UFP Writer"
+msgstr "Zapisywacz UFP"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Zapewnia czynności maszyny dla urządzeń Ultimaker (na przykład kreator poziomowania stołu, wybór ulepszeń itp.)."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Zapewnia wsparcie dla importowania profili ze starszych wersji Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Czynności maszyny Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Czytnik Profili Starszej Cura"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Zapisuje g-code do skompresowanego archiwum."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Uaktualnia konfiguracje z Cura 4.3 to Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Zapisywacz Skompresowanego G-code"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Uaktualnij wersję 4.3 do 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Sprawdź aktualizacje oprogramowania."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Ulepsza konfigurację z Cura 2.1 do Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Sprawdzacz Aktualizacji Oprogramowania"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Ulepszenie Wersji z 2.1 do 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Zatwierdza anonimowe informację o cięciu. Może być wyłączone w preferencjach."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Uaktualnia konfiguracje z Cura 4.1 to Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informacje o cięciu"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Uaktualnij wersję 4.1 do 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Zapewnia możliwość czytania i tworzenia profili materiałów opartych o XML."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Profile Materiału"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
 msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
+msgid "Version Upgrade 4.5 to 4.6"
 msgstr ""
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Znajdź, zarządzaj i instaluj nowe pakiety Cura."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Ulepsza konfigurację z Cura 3.3 do Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Narzędzia"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Ulepszenie Wersji z 3.3 do 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Zapisuje g-code do pliku."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Zapisywacz G-code"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr ""
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Zapewnia widok Symulacji."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Ulepsza konfigurację z Cura 2.7 do Cura 3.0."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Widok Symulacji"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Ulepszenie Wersji 2.7 do 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Ulepsza konfigurację z Cura 2.5 do Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Ulepsza konfigurację z Cura 3.0 do Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Ulepszenie Wersji z 2.5 do 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Ulepszenie Wersji 3.0 do 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6266,115 +6261,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Ulepsza konfigurację z Cura 2.6 do Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Ulepszenie Wersji z 2.6 do 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Ulepsza konfigurację z Cura 3.4 do Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Uaktualnia konfiguracje z Cura 4.2 to Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Ulepszenie Wersji z 3.4 do 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Uaktualnij wersję 4.2 do 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Ulepsza konfigurację z Cura 2.1 do Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Uaktualnia konfiguracje z Cura 4.0 to Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Ulepszenie Wersji z 2.1 do 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Uaktualnij wersję 4.0 do 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Ulepsza konfigurację z Cura 3.2 do Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Ulepszenie Wersji z 3.2 do 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr ""
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Ulepsza konfigurację z Cura 2.2 do Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr ""
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Ulepszenie Wersji z 2.2 do 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Uaktualnia konfiguracje z Cura 4.2 to Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Ulepsza konfigurację z Cura 3.2 do Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Uaktualnij wersję 4.2 do 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Ulepszenie Wersji z 3.2 do 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Uaktualnia konfiguracje z Cura 4.3 to Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Ulepsza konfigurację z Cura 2.5 do Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Uaktualnij wersję 4.3 do 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Ulepszenie Wersji z 2.5 do 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr ""
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Uaktualnia konfiguracje z Cura 3.5 to Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr ""
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Uaktualnij wersję 3.5 do 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Ulepsza konfigurację z Cura 2.7 do Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Ulepsza konfigurację z Cura 3.4 do Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Ulepszenie Wersji 2.7 do 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Ulepszenie Wersji z 3.4 do 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Ulepsza konfigurację z Cura 2.6 do Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Ulepszenie Wersji z 2.6 do 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr ""
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6386,105 +6381,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Ulepsza konfigurację z Cura 3.3 do Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Utwórz kopię zapasową i przywróć konfigurację."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Ulepszenie Wersji z 3.3 do 3.4"
+msgid "Cura Backups"
+msgstr "Kopie zapasowe Cura"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Ulepsza konfigurację z Cura 3.0 do Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Zapewnia wsparcie dla importowania profili Cura."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Ulepszenie Wersji 3.0 do 3.1"
+msgid "Cura Profile Reader"
+msgstr "Czytnik Profili Cura"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Uaktualnia konfiguracje z Cura 4.0 to Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Zatwierdza anonimowe informację o cięciu. Może być wyłączone w preferencjach."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Uaktualnij wersję 4.0 do 4.1"
+msgid "Slice info"
+msgstr "Informacje o cięciu"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr ""
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Zapewnia wsparcie dla importowania profili z plików g-code."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr ""
+msgid "G-code Profile Reader"
+msgstr "Czytnik Profili G-code"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Ulepsza konfigurację z Cura 2.2 do Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "Zapisuje g-code do skompresowanego archiwum."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Ulepszenie Wersji z 2.2 do 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Zapisywacz Skompresowanego G-code"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Uaktualnia konfiguracje z Cura 4.1 to Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Dodatek, który pozwala użytkownikowi tworzenie skryptów do post processingu"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Uaktualnij wersję 4.1 do 4.2"
+msgid "Post Processing"
+msgstr "Post Processing"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Uaktualnia konfiguracje z Cura 3.5 to Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Tworzy siatkę do blokowania drukowania podpór w określonych miejscach"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Uaktualnij wersję 3.5 do 4.0"
+msgid "Support Eraser"
+msgstr "Usuwacz Podpór"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Zarządza połączeniami z sieciowymi drukarkami Ultimaker."
+msgid "Provides a preview stage in Cura."
+msgstr "Dostarcza podgląd w Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Połączenie sieciowe Ultimaker"
+msgid "Preview Stage"
+msgstr "Podgląd"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Zapewnia wsparcie dla czytania plików modeli."
+msgid "Provides the X-Ray view."
+msgstr "Zapewnia widok rentgena."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Czytnik siatki trójkątów"
+msgid "X-Ray View"
+msgstr "Widok Rentgena"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Zapewnia obsługę odczytu pakietów formatu Ultimaker."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Zapewnia czynności maszyny dla urządzeń Ultimaker (na przykład kreator poziomowania stołu, wybór ulepszeń itp.)."
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Czytnik UFP"
+msgid "Ultimaker machine actions"
+msgstr "Czynności maszyny Ultimaker"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6496,35 +6501,283 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Widok Bryły"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Zapewnia wsparcie dla tworzenia plików 3MF."
+msgid "Allows loading and displaying G-code files."
+msgstr "Pozwala na ładowanie i wyświetlanie plików G-code."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF Writer"
+msgid "G-code Reader"
+msgstr "Czytnik G-code"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Zapewnia etap monitorowania w Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Zapewnia możliwość zmiany ustawień maszyny (takich jak objętość robocza, rozmiar dyszy itp.)."
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Etap Monitorowania"
+msgid "Machine Settings Action"
+msgstr ""
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Sprawdza możliwe problemy drukowania modeli i konfiguracji wydruku i podaje porady."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Akceptuje G-Code i wysyła je do drukarki. Wtyczka może też aktualizować oprogramowanie."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Sprawdzacz Modelu"
+msgid "USB printing"
+msgstr "Drukowanie USB"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Akceptowanie Licencji Wtyczki"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Konwertuj obraz ..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "Szerokość w milimetrach na stole."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Marketplace"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "Należy uruchomić ponownie Cura, aby zmiany w pakietach przyniosły efekt."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Instaluj"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Zainstalowane"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Zgodność"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Drukarka"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Stół roboczy"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Podpory"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Jakość"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Dane Techniczne"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Dane Bezpieczeństwa"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Wskazówki Drukowania"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Strona Internetowa"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "<a href=‚%1’>Zaloguj</a> aby zainstalować lub aktualizować"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href=‚%1’>Kup materiał na szpulach</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Aktualizuj"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Aktualizowanie"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Zaktualizowano"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Powrót"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Wtyczki"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Zainstalowano"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Zostanie zainstalowane po ponownym uruchomieniu"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "<a href='%1'>Zaloguj</a> aby aktualizować"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Zainstaluj poprzednią wersję"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Odinstaluj"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Udział Społeczności"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Wtyczki Społeczności"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Materiały Podstawowe"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Uzyskiwanie pakietów..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Strona internetowa"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "E-mail"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Wersja"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Ostatnia aktualizacja"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Pobrań"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Nie można połączyć się z bazą danych pakietów Cura. Sprawdź swoje połączenie z internetem."
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Potwierdź deinstalację"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Odinstalowujesz materiały i/lub profile, które są aktualnie używane. Zatwierdzenie spowoduje przywrócenie bieżących ustawień materiału/profilu do ustawień domyślnych."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Materiały"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Profile"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Potwierdź"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Niektóre rzeczy mogą być problematyczne podczas tego wydruku. Kliknij, aby zobaczyć porady dotyczące regulacji."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Biblioteka pomocnicza do obsługi obiektów płaskich"
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "P&ole robocze"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Stwórz"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Duplikuj"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Drukarka: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Aktualizuj profil z bieżącymi ustawieniami"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Motyw:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Musisz zrestartować aplikację, aby te zmiany zaczęły obowiązywać."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Więcej informacji"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Stwórz"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Drukarka"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Jednostka"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Pokaż przewodnik rozwiązywania problemów online"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Rozłóż Wszystkie Modele na Wszystkie Platformy Robocze"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Marketplace"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Znajdź, zarządzaj i instaluj nowe pakiety Cura."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Narzędzia"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Zapewnia widok Symulacji."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/pl_PL/fdmextruder.def.json.po b/resources/i18n/pl_PL/fdmextruder.def.json.po
index c9a1cb944b..e45d136fbd 100644
--- a/resources/i18n/pl_PL/fdmextruder.def.json.po
+++ b/resources/i18n/pl_PL/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Mariusz 'Virgin71' Matłosz <matliks@gmail.com>\n"
 "Language-Team: reprapy.pl\n"
diff --git a/resources/i18n/pl_PL/fdmprinter.def.json.po b/resources/i18n/pl_PL/fdmprinter.def.json.po
index bfe7723308..eacb497869 100644
--- a/resources/i18n/pl_PL/fdmprinter.def.json.po
+++ b/resources/i18n/pl_PL/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2019-11-15 15:34+0100\n"
 "Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
 "Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
@@ -466,8 +466,8 @@ msgstr "Obszar głowicy i wentylatora drukarki"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "Sylwetka 2D głowicy drukującej (z nasadką wentylatora)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -740,6 +740,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "Średnica koła, które przesuwa materiał w podajniku."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Jakość"
@@ -960,6 +970,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Liczba ścian. Przy obliczaniu za pomocą grubości ściany, ta wartość jest zaokrąglana do liczby całkowitej."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Długość Czyszczenia Zew. Ściana"
@@ -990,14 +1050,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Optymalizuje kolejność, w jakiej będą drukowane ścianki w celu zredukowania ilości retrakcji oraz dystansu ruchów jałowych. Większość części skorzysta na załączeniu tej funkcji, jednak w niektórych przypadkach czas druku może się wydłużyć, proszę więc o porównanie oszacowanego czasu z funkcją załączoną oraz wyłączoną. Pierwsza warstwa nie zostanie zoptymalizowana, jeżeli jako poprawa przyczepności stołu zostanie wybrany obrys."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Zew. Ściany Przed Wew"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Drukuje ściany w kolejności od zewnątrz do wewnątrz, gdy jest włączona. Może to poprawić dokładność wymiarów w modelach X i Y przy użyciu plastiku o wysokiej lepkości, takiego jak ABS; może jednak zmniejszyć jakość druku zewnętrznego, zwłaszcza na zwisach."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1010,94 +1080,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Drukuje dodatkową ścianę na każdej warstwie. W ten sposób wypełnienie jest tworzone pomiędzy tymi dod. ścianami, co skutkuje mocniejszymi wydrukami."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Kompensuj Nakładanie się Ścian"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Kompensuje przepływ dla części, których ściana jest drukowana kiedy jest już w tym miejscu ściana."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Komp. Zew. Nakład. się Ścian"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Kompensuje przepływ dla części, których zewnętrzna ściana jest drukowana kiedy jest już w tym miejscu ściana."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Komp. Wew. Nakład. się Ścian"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Kompensuje przepływ dla części, których wewnętrzna ściana jest drukowana kiedy jest już w tym miejscu ściana."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Minimalny Przepływ Dla Ścianek"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Minimalny dopuszczalny przepływ procentowy dla linii ścianki. Kompensacja nakładania się ścianek redukuje przepływ, gdy dana ścianka znajduje się blisko wydrukowanej już ścianki. Ścianki, których przepływ powinien być mniejszy, niż ta wartość, będą zastąpione ruchami jałowymi. Aby używać tego ustawienia należy załączyć kompensację nakładających się ścianek oraz drukowanie ścianek zewnętrznych przed wewnętrznymi."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Preferuj Retrakcję"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Gdy załączone, retrakcja jest używana zamiast kombinowanego ruchu jałowego, który zastępuje ściankę, której przepływ jest mniejszy od minimalnego."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Wypełnij Szczeliny Między Ścianami"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Wypełnia szczeliny pomiędzy ściany gdzie żadna ściana nie pasuje."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Nigdzie"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Drukuj Cienkie Linie"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Wszędzie"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Drukuj części modelu, które są poziomo cieńsze niż rozmiar dyszy."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Filtruj Małe Luki"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Filtruj małe luki, aby zredukować bloby na zewnątrz modelu."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Drukuj Cienkie Linie"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Drukuj części modelu, które są poziomo cieńsze niż rozmiar dyszy."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2199,6 +2259,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Materiał krystaliczny"
@@ -2709,24 +2789,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "Pierwsze warstwy są drukowane wolniej niż w pozostałej części modelu, więc lepiej przylegają do stołu i zwiększa się prawdopodobieństwo sukcesu. Prędkość wzrasta stopniowo w czasie druku tych warstw."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Zrówn. Przepływ Filamentu"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Wydrukuj cieńsze niż normalne linie szybciej, tak aby ilość materiału wytłaczanego na sekundę pozostała taka sama. Cienkie części modelu mogą wymagać drukowania linii o mniejszej szerokości linii niż podane w ustawieniach. To ustawienie kontroluje zmiany prędkości dla takich linii."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Maks. Prędk. dla Zrówn. Przepływu"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Maksymalna prędkość drukowania podczas ustawiania prędkości druku w celu zrównoważenia przepływu."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4464,6 +4534,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "Ekstruder używany do drukowania obwódki/obrysu/tratwy. Używane przy multi-ekstruzji."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Liczba Linii Obwódki"
@@ -4628,6 +4738,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "Odległość między liniami na górnej warstwie tratwy. Rozstaw powinien być równy szerokości linii, tak że powierzchnia jest pełna."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Grubość Środka Tratwy"
@@ -5128,6 +5248,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "Maksymalne odchylenie dozwolone przy zmniejszaniu rozdzielczości dla ustawienia maksymalnej rozdzielczości. Jeśli to zwiększysz, wydruk będzie mniej dokładny, ale g-code będzie mniejszy. Maksymalne odchylenie jest limitem dla maksymalnej rozdzielczości, więc wystąpi konflikt, maksymalne odchylenie zawsze będzie używane."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Specjalne Tryby"
@@ -6422,6 +6552,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "Pierwsza warstwa małych obiektów zostanie wydrukowana z zadanym procentem ich normalnej prędkości drukowania. Wolniejsze drukowanie może poprawić przyczepność i dokładność."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Ustawienia Wiersza Polecenia"
@@ -6481,6 +6641,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Forma przesunięcia, która ma być zastosowana do modelu podczas ładowania z pliku."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "Sylwetka 2D głowicy drukującej (z nasadką wentylatora)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Zew. Ściany Przed Wew"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Drukuje ściany w kolejności od zewnątrz do wewnątrz, gdy jest włączona. Może to poprawić dokładność wymiarów w modelach X i Y przy użyciu plastiku o wysokiej lepkości, takiego jak ABS; może jednak zmniejszyć jakość druku zewnętrznego, zwłaszcza na zwisach."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Kompensuj Nakładanie się Ścian"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Kompensuje przepływ dla części, których ściana jest drukowana kiedy jest już w tym miejscu ściana."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Komp. Zew. Nakład. się Ścian"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Kompensuje przepływ dla części, których zewnętrzna ściana jest drukowana kiedy jest już w tym miejscu ściana."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Komp. Wew. Nakład. się Ścian"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Kompensuje przepływ dla części, których wewnętrzna ściana jest drukowana kiedy jest już w tym miejscu ściana."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Minimalny Przepływ Dla Ścianek"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Minimalny dopuszczalny przepływ procentowy dla linii ścianki. Kompensacja nakładania się ścianek redukuje przepływ, gdy dana ścianka znajduje się blisko wydrukowanej już ścianki. Ścianki, których przepływ powinien być mniejszy, niż ta wartość, będą zastąpione ruchami jałowymi. Aby używać tego ustawienia należy załączyć kompensację nakładających się ścianek oraz drukowanie ścianek zewnętrznych przed wewnętrznymi."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Preferuj Retrakcję"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Gdy załączone, retrakcja jest używana zamiast kombinowanego ruchu jałowego, który zastępuje ściankę, której przepływ jest mniejszy od minimalnego."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Wypełnij Szczeliny Między Ścianami"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Wypełnia szczeliny pomiędzy ściany gdzie żadna ściana nie pasuje."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Nigdzie"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Wszędzie"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Filtruj Małe Luki"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Filtruj małe luki, aby zredukować bloby na zewnątrz modelu."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Zrówn. Przepływ Filamentu"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Wydrukuj cieńsze niż normalne linie szybciej, tak aby ilość materiału wytłaczanego na sekundę pozostała taka sama. Cienkie części modelu mogą wymagać drukowania linii o mniejszej szerokości linii niż podane w ustawieniach. To ustawienie kontroluje zmiany prędkości dla takich linii."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Maks. Prędk. dla Zrówn. Przepływu"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Maksymalna prędkość drukowania podczas ustawiania prędkości druku w celu zrównoważenia przepływu."
+
 #~ msgctxt "machine_max_feedrate_e label"
 #~ msgid "Maximum Feedrate"
 #~ msgstr "Maksymalna Prędk. Posuwu"
diff --git a/resources/i18n/pt_BR/cura.po b/resources/i18n/pt_BR/cura.po
index f9d8002a8c..7313e9eb97 100644
--- a/resources/i18n/pt_BR/cura.po
+++ b/resources/i18n/pt_BR/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2022-01-10 12:10+0100\n"
 "Last-Translator: Cláudio Sampaio <patola@gmail.com>\n"
 "Language-Team: Cláudio Sampaio <patola@gmail.com>\n"
@@ -17,1428 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 "X-Generator: Poedit 3.0\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Não pude criar arquivo do diretório de dados de usuário: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122 /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Backup"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Tentativa de restauração de backup do Cura sem dados ou metadados apropriados."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Tentativa de restauração de backup do Cura de versão maior que a atual."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "O seguinte erro ocorreu ao tentar restaurar um backup do Cura:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Por favor sincronize os perfis de material com suas impressoras antes de começar a imprimir."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Novos materiais instalados"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Sincronizar materiais"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "Saiba mais"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "Não foi possível salvar o arquivo de materiais para {}:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Falha em salvar o arquivo de materiais"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Erro desconhecido."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "A altura do volume de impressão foi reduzida para que o valor da \"Sequência de Impressão\" impeça o eixo de colidir com os modelos impressos."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volume de Impressão"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Tem certeza que deseja remover {0}? Isto não pode ser defeito!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Não sobreposto"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Desconhecido"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "As impressoras abaixo não podem ser conectadas por serem parte de um grupo"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Impressoras de rede disponíveis"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Preparar"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Perfil do Cura"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Perfis personalizados"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Todos Os Tipos Suportados ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "Câmbio de Ativos Digitais COLLADA"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Todos Os Arquivos (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visual"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "O perfil visual é projetado para imprimir protótipos e modelos virtuais com o objetivo de alta qualidade visual e de superfície."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engenharia"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "O perfil de engenharia é projetado para imprimir protótipos funcionais e partes de uso final com o objetivo de melhor precisão e tolerâncias mais estritas."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Rascunho"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "O perfil de rascunho é projetado para imprimir protótipos iniciais e validações de conceito com o objetivo de redução significativa de tempo de impressão."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Material Personalizado"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289 /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Login falhou"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Achando novos lugares para objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Buscando Localização"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Não foi possível achar um lugar dentro do volume de construção para todos os objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Não Foi Encontrada Localização"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Falha em criar arquivo de materiais para sincronizar com impressoras."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Falha em carregar o arquivo de materiais para sincronizar com impressoras."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "A resposta da Digital Factory parece estar corrompida."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "A resposta da Digital Factory veio sem informações importantes."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Falha em conectar com a Digital Factory para sincronizar materiais com algumas das impressoras."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Falha em conectar à Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Carregando máquinas..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Ajustando preferências..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Inicializando Máquina Ativa..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Inicializando gestor de máquinas..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Inicializando volume de impressão..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Configurando cena..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Carregando interface..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Inicializando motor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Somente um arquivo G-Code pode ser carregado por vez. Pulando importação de {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809 /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Aviso"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Não é possível abrir nenhum outro arquivo se G-Code estiver sendo carregado. Pulando importação de {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Erro"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Pular"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72 /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Fechar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Próximo"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290 /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Finalizar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Adicionar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Grupo #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Parede Externa"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Paredes Internas"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Contorno"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Preenchimento"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Preenchimento de Suporte"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Interface de Suporte"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Suporte"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Skirt (Saia)"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Torre de Prime"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Percurso"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Retrações"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Outros"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37 /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "As notas de lançamento não puderam ser abertas."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "O Cura não consegue iniciar"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>Oops, o Ultimaker Cura encontrou algo que não parece estar correto.</p></b>\n"
-"                    <p>Encontramos um erro irrecuperável durante a inicialização. Ele foi possivelmente causado por arquivos de configuração incorretos. Sugerimos salvar e restabelecer sua configuração.</p>\n"
-"                    <p>Cópias salvas podem ser encontradas na pasta de configuração.</p>\n"
-"                    <p>Por favor nos envie este Relatório de Falha para consertar o problema.</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Enviar relatório de falha à Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Exibir relatório de falha detalhado"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Mostrar a pasta de configuração"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Salvar e Restabelecer Configuração"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Relatório de Problema"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Um erro fatal ocorreu no Cura. Por favor nos envie este Relatório de Falha para consertar o problema</p></b>\n"
-"            <p>Por favor use o botão \"Enviar relatório\" para publicar um relatório de erro automaticamente em nossos servidores</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Informação do Sistema"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Desconhecida"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Versão do Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Linguagem do Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "Linguagem do SO"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Plataforma"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Versão do Qt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "Versão do PyQt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Ainda não inicializado<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>Versão da OpenGL: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>Fornecedor da OpenGL: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>Renderizador da OpenGL: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Traceback do erro"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Registros"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Enviar relatório"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Não foi possível iniciar processo de sign-in. Verifique se outra tentativa de sign-in ainda está ativa."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Não foi possível contactar o servidor de contas da Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "Login falhou"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "O estado provido não está correto."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Tempo esgotado ao autenticar com o servidor da conta."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Por favor dê as permissões requeridas ao autorizar esta aplicação."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Algo inesperado aconteceu ao tentar login, por favor tente novamente."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Não foi possível ler a resposta."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Multiplicando e colocando objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Colocando Objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Colocando Objeto"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Não Suportado"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Bico"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Os ajustes foram alterados para seguir a disponibilidade de extrusores atuais:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Ajustes atualizados"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extrusor(es) Desabilitado(s)"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "O Arquivo Já Existe"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "O arquivo <filename>{0}</filename> já existe. Tem certeza que quer sobrescrevê-lo?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459 /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "URL de arquivo inválida:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Falha ao exportar perfil para <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Falha ao exportar perfil para <filename>{0}</filename>: complemento escritor relatou erro."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Perfil exportado para <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Exportação concluída"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Falha ao importar perfil de <filename>{0}</filename>: {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Não foi possível importar perfil de <filename>{0}</filename> antes de uma impressora ser adicionada."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Não há perfil personalizado a importar no arquivo <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Erro ao importar perfil de <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Este perfil <filename>{0}</filename> contém dados incorretos, não foi possível importá-lo."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Erro ao importar perfil de <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "Perfil {0} importado com sucesso."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "Arquivo {0} não contém nenhum perfil válido."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "O Perfil {0} tem tipo de arquivo desconhecido ou está corrompido."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Perfil personalizado"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Falta um tipo de qualidade ao Perfil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Não há impressora ativa ainda."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "Não foi possível adicionar o perfil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "Tipo de qualidade '{0}' não é compatível com a definição de máquina ativa atual '{1}'."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Alerta: o perfil não está visível porque seu tipo de qualidade '{0}' não está disponível para a configuração atual. Altere para uma combinação de material/bico que possa usar este tipo de qualidade."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Ajustes por Modelo"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configurar ajustes por Modelo"
+msgid "glTF Binary"
+msgstr "Binário glTF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Perfil do Cura"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embutido JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Arquivo X3D"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Houve um erro ao tentar restaurar seu backup."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Backups"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Houve um erro ao transferir seu backup."
+msgid "Stanford Triangle Format"
+msgstr "Formato de Triângulos de Stanford"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Criando seu backup..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Câmbio de Ativos Digitais COLLADA Comprimido"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Houve um erro ao criar seu backup."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Não foi possível acessar informação de atualização."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Enviando seu backup..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Novos recursos ou consertos de bugs podem estar disponíveis para sua {machine_name}! Se você não o fez ainda, recomenda-se que atualize o firmware de sua impressora para a versão {latest_version}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Seu backup terminou de ser enviado."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "Novo firmware estável de %s disponível"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "O backup excede o tamanho máximo de arquivo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Como atualizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Gerenciar backups"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Ajustes da Máquina"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Bloqueador de Suporte"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Cria um volume em que os suportes não são impressos."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Unidade Removível"
+msgid "Monitor"
+msgstr "Monitor"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Salvar em Unidade Removível"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Salvar em Unidade Removível {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Não há formatos de arquivo disponíveis com os quais escrever!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Salvando na Unidade Removível <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Salvando"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Não foi possível salvar em <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Não foi possível encontrar nome de arquivo ao tentar escrever em {device}."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Não foi possível salvar em unidade removível {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Erro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Salvo em Unidade Removível {0} como {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Arquivo Salvo"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Ejetar"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Ejetar dispositivo removível {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0} ejetado. A unidade agora pode ser removida de forma segura."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Remover Hardware com Segurança"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Erro ao ejetar {0}. Outro programa pode estar usando a unidade."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Atualizar Firmware"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Perfis do Cura 15.04"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "O arquivo de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não foi possível importar a máquina. Os modelos serão importados ao invés dela."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Abrir Arquivo de Projeto"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "O arquivo de projeto <filename>{0}</filename> tornou-se subitamente inacessível: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Não Foi Possível Abrir o Arquivo de Projeto"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "Arquivo de projeto <filename>{0}</filename> está corrompido: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "O arquivo de projeto <filename>{0}</filename> foi feito usando perfis que são desconhecidos para esta versão do Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27 /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Arquivo 3MF"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Não foi possível escrever no arquivo UFP:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28 /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Pacote de Formato da Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Arquivo G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Pré-visualização"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Visão de Raios-X"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Processando Camadas"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "Informação"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "O fatiamento falhou com um erro não esperado. Por favor considere relatar um bug em nosso issue tracker."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "Fatiamento falhado"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Relatar um bug"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Relatar um bug no issue tracker do Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Não foi possível fatiar com o material atual visto que é incompatível com a máquina ou configuração selecionada."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Não foi possível fatiar"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Não foi possível fatiar com os ajustes atuais. Os seguintes ajustes têm erros: {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Não foi possível fatiar devido a alguns ajustes por modelo. Os seguintes ajustes têm erros em um dos modelos ou mais: {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Não foi possível fatiar porque a torre de purga ou posição de purga são inválidas."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Não foi possível fatiar porque há objetos associados com o Extrusor desabilitado %s."
+msgid "Warning"
+msgstr "Aviso"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Por favor revise os ajustes e verifique se seus modelos:\n"
-"- Cabem dentro do volume de impressão\n"
-"- Estão associados a um extrusor habilitado\n"
-"- Não estão todos configurados como malhas de modificação"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Unidade Removível"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "Arquivo AMF"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17 /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Arquivo de G-Code Comprimido"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Pós-Processamento"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modificar G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Impressão USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Imprimir pela USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Imprimir pela USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Conectado via USB"
+msgid "Ultimaker Format Package"
+msgstr "Pacote de Formato da Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Uma impressão USB está em progresso, fechar o Cura interromperá esta impressão. Tem certeza?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Uma impressão ainda está em progresso. O Cura não pode iniciar outra impressão via USB até que a impressão anterior tenha completado."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Impressão em Progresso"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Preparar"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Interpretando G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Detalhes do G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Certifique que o g-code é adequado para sua impressora e configuração antes de enviar o arquivo. A representação de g-code pode não ser acurada."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Arquivo G"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Imagem JPG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Imagem JPEG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Imagem PNG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Imagem BMP"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Imagem GIF"
+msgid "Per Model Settings"
+msgstr "Ajustes por Modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Nivelar mesa"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configurar ajustes por Modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Selecionar Atualizações"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "O GCodeGzWriter não suporta modo binário."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Não foi possível acessar informação de atualização."
+msgid "Update Firmware"
+msgstr "Atualizar Firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Novos recursos ou consertos de bugs podem estar disponíveis para sua {machine_name}! Se você não o fez ainda, recomenda-se que atualize o firmware de sua impressora para a versão {latest_version}."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "Novo firmware estável de %s disponível"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Como atualizar"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "Não foi possível ler o arquivo de dados de exemplo."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "Você precisa sair e reiniciar {} para que as alterações tenham efeito."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Sincronizando..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95 /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Alterações detectadas de sua conta Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Você quer sincronizar os pacotes de material e software com sua conta?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Sincronizar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Recusar e remover da conta"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} complementos falharam em baixar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Recusar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Concordar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Acordo de Licença do Complemento"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "O GCodeWriter não suporta modo binário."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Por favor prepare o G-Code antes de exportar."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "O Cura não exibe camadas de forma precisa quando Impressão em Arame está habilitada."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "O Cura detectou perfis de material que não estão instalados ainda na impressora host do grupo {0}."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Visão Simulada"
+msgid "Sending materials to printer"
+msgstr "Enviando material para a impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Nada está exibido porque você precisa fatiar primeiro."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Você está tentando conectar a {0} mas ele não é host de um grupo. Você pode visitar a página web para configurá-lo como host de grupo."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Não há camadas a exibir"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Não mostrar essa mensagem novamente"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Visão de Camadas"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Imprimir pela rede"
+msgid "Not a group host"
+msgstr "Não é host de grupo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Imprime pela rede"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Configurar grupo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Conectado pela rede"
+msgid "Sending Print Job"
+msgstr "Enviando Trabalho de Impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "amanhã"
+msgid "Uploading print job to printer."
+msgstr "Transferindo trabalho de impressão para a impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "hoje"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "A fila de trabalhos de impressão está cheia. A impressora não pode aceitar novo trabalho."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Conectar pela rede"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "Fila Cheia"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Por favor espere até que o trabalho atual tenha sido enviado."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Erro de impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Trabalho de impressão enviado à impressora com sucesso."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Dados Enviados"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Você está tentando conectar a uma impressora que não está rodando Ultimaker Connect. Por favor atualiza a impressora para o firmware mais recente."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Atualize sua impressora"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "A fila de trabalhos de impressão está cheia. A impressora não pode aceitar novo trabalho."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "Fila Cheia"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Enviando Trabalho de Impressão"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Transferindo trabalho de impressão para a impressora."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "O Cura detectou perfis de material que não estão instalados ainda na impressora host do grupo {0}."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Enviando material para a impressora"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Não foi possível transferir os dados para a impressora."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Erro de rede"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Você está tentando conectar a {0} mas ele não é host de um grupo. Você pode visitar a página web para configurá-lo como host de grupo."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Não é host de grupo"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Configurar grupo"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1448,66 +296,85 @@ msgstr ""
 "Sua impressora <b>{printer_name}</b> poderia estar conectada via nuvem.\n"
 " Gerencie sua fila de impressão e monitore suas impressoras de qualquer lugar conectando sua impressora à Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "Você está pronto para a impressão de nuvem?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Começar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "Saiba mais"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Imprimir pela nuvem"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Você está tentando conectar a uma impressora que não está rodando Ultimaker Connect. Por favor atualiza a impressora para o firmware mais recente."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Atualize sua impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Não foi possível transferir os dados para a impressora."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Erro de rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Imprimir pela rede"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Imprimir pela nuvem"
+msgid "Print over network"
+msgstr "Imprime pela rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Conectado pela nuvem"
+msgid "Connected over the network"
+msgstr "Conectado pela rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Monitorar impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "amanhã"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Rastrear a impressão na Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "hoje"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Código de erro desconhecido ao transferir trabalho de impressão: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Conectar pela rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nova impressora detectada na sua conta Ultimaker"
 msgstr[1] "Novas impressoras detectadas na sua conta Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Adicionando impressora {name} ({model}) da sua conta"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1515,70 +382,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... e {0} outra"
 msgstr[1] "... e {0} outras"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Impressoras adicionadas da Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Conexão de nuvem não está disponível para uma impressora"
 msgstr[1] "Conexão de nuvem não está disponível para algumas impressoras"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Esta impressora não está ligada à Digital Factory:"
 msgstr[1] "Estas impressoras não estão ligadas à Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Para estabelecer uma conexão, por favor visite o {website_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Manter configurações da impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Remover impressoras"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} será removida até a próxima sincronização de conta."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Para remover {printer_name} permanentemente, visite {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Tem certeza que quer remover {printer_name} temporariamente?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Remover impressoras?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1594,7 +462,7 @@ msgstr[1] ""
 "Você está prestes a remover {0} impressoras do Cura. Esta ação não pode ser desfeita.\n"
 "Tem certeza que quer continuar?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1603,2010 +471,3124 @@ msgstr ""
 "Você está prestes a remover todas as impressoras do Cura. Esta ação não pode ser desfeita.\n"
 "Tem certeza que quer continuar?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Imprimir pela nuvem"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "Câmbio de Ativos Digitais COLLADA"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Imprimir pela nuvem"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "Binário glTF"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Conectado pela nuvem"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embutido JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Monitorar impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Formato de Triângulos de Stanford"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Rastrear a impressão na Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Câmbio de Ativos Digitais COLLADA Comprimido"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Código de erro desconhecido ao transferir trabalho de impressão: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Assistente de Modelo 3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "As áreas ressaltadas indicam superfícies faltantes ou incorretas. Conserte seu modelo e o abra novamente no Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Um ou mais modelos 3D podem não ser impressos otimamente devido ao tamanho e configuração de material:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Descubra como assegurar a melhor qualidade de impressão e confiabilidade possível.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver guia de qualidade de impressão</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "O Cura não exibe camadas de forma precisa quando Impressão em Arame está habilitada."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Erros de Modelo"
+msgid "Simulation View"
+msgstr "Visão Simulada"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Visão sólida"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Nada está exibido porque você precisa fatiar primeiro."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Não há camadas a exibir"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Não mostrar essa mensagem novamente"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Visão de Camadas"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "O GCodeWriter não suporta modo binário."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Por favor prepare o G-Code antes de exportar."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Arquivo G-Code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Erro ao escrever arquivo 3mf."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "O complemento de Escrita 3MF está corrompido."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Não existe espaço de trabalho ainda para a escrita. Por favor adicione uma impressora primeiro."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Sem permissão para gravar o espaço de trabalho aqui."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "O sistema operacional não permite salvar um arquivo de projeto nesta localização ou com este nome de arquivo."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "Arquivo 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Arquivo de Projeto 3MF do Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Arquivo de G-Code Comprimido"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "O fatiamento falhou com um erro não esperado. Por favor considere relatar um bug em nosso issue tracker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "Fatiamento falhado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Relatar um bug"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Relatar um bug no issue tracker do Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Não foi possível fatiar com o material atual visto que é incompatível com a máquina ou configuração selecionada."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Assistente de Modelo 3D"
+msgid "Unable to slice"
+msgstr "Não foi possível fatiar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Não foi possível fatiar com os ajustes atuais. Os seguintes ajustes têm erros: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Não foi possível fatiar devido a alguns ajustes por modelo. Os seguintes ajustes têm erros em um dos modelos ou mais: {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Não foi possível fatiar porque a torre de purga ou posição de purga são inválidas."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Não foi possível fatiar porque há objetos associados com o Extrusor desabilitado %s."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>Um ou mais modelos 3D podem não ser impressos otimamente devido ao tamanho e configuração de material:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Descubra como assegurar a melhor qualidade de impressão e confiabilidade possível.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver guia de qualidade de impressão</a></p>"
+"Por favor revise os ajustes e verifique se seus modelos:\n"
+"- Cabem dentro do volume de impressão\n"
+"- Estão associados a um extrusor habilitado\n"
+"- Não estão todos configurados como malhas de modificação"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Tipo de Malha"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Processando Camadas"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Modelo normal"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informação"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Imprimir como suporte"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Arquivo X3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Modificar ajustes para sobreposições"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Imagem JPG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Não suportar sobreposições"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Imagem JPEG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Somente malha de preenchimento"
+msgid "PNG Image"
+msgstr "Imagem PNG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Malha de corte"
+msgid "BMP Image"
+msgstr "Imagem BMP"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Selecionar ajustes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Imagem GIF"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Selecionar Ajustes a Personalizar para este modelo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Bico"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtrar..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "O arquivo de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não foi possível importar a máquina. Os modelos serão importados ao invés dela."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Exibir tudo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Abrir Arquivo de Projeto"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Backups do Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "O arquivo de projeto <filename>{0}</filename> tornou-se subitamente inacessível: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Versão do Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Não Foi Possível Abrir o Arquivo de Projeto"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Máquinas"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "Arquivo de projeto <filename>{0}</filename> está corrompido: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiais"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "O arquivo de projeto <filename>{0}</filename> foi feito usando perfis que são desconhecidos para esta versão do Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Perfis"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Recomendado"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Complementos"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Quer mais?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "Arquivo 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Backup Agora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Não foi possível escrever no arquivo UFP:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Auto Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Perfis do Cura 15.04"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Criar um backup automaticamente toda vez que o Cura iniciar."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Backups"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Restaurar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Houve um erro ao transferir seu backup."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Apagar o Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Criando seu backup..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Você tem certeza que deseja apagar este backup? Isto não pode ser desfeito."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Houve um erro ao criar seu backup."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Restaurar Backup"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Enviando seu backup..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Você precisará reiniciar o Cura antes que seu backup seja restaurado. Deseja fechar o Cura agora?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Seu backup terminou de ser enviado."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Fazer backup e sincronizar os ajustes do Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "O backup excede o tamanho máximo de arquivo."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Entrar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Gerenciar backups"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Meus backups"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Backup"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Você não tem nenhum backup atualmente. Use o botão 'Backup Agora' para criar um."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Houve um erro ao tentar restaurar seu backup."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Durante a fase de pré-visualização, você estará limitado a 5 backups visíveis. Remova um backup para ver os mais antigos."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "Não foi possível ler o arquivo de dados de exemplo."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Ajustes de Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "O GCodeGzWriter não suporta modo binário."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (largura)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Pós-Processamento"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modificar G-Code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Profundidade)"
+msgid "Support Blocker"
+msgstr "Bloqueador de Suporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Altura)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Cria um volume em que os suportes não são impressos."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forma da plataforma de impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Pré-visualização"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origem no centro"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Visão de Raios-X"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Mesa aquecida"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Nivelar mesa"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volume de construção aquecido"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Selecionar Atualizações"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Sabor de G-Code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Ajustes da Cabeça de Impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X mín"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y mín"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X máx"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y máx"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Altura do Eixo"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Número de Extrusores"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Aplicar deslocamentos de Extrusão ao G-Code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "As áreas ressaltadas indicam superfícies faltantes ou incorretas. Conserte seu modelo e o abra novamente no Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-Code Inicial"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Erros de Modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-Code Final"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "Saiba mais"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Ajustes do Bico"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Visão sólida"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Tamanho do bico"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Interpretando G-Code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diâmetro de material compatível"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Detalhes do G-Code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Deslocamento X do Bico"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Certifique que o g-code é adequado para sua impressora e configuração antes de enviar o arquivo. A representação de g-code pode não ser acurada."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Deslocamento Y do Bico"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Arquivo G"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Número da Ventoinha de Resfriamento"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Ajustes da Máquina"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "G-Code Inicial do Extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Impressão USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "G-Code Final do Extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Imprimir pela USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Imprimir pela USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Atualizar Firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Conectado via USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "O firmware é o software rodando diretamente no maquinário de sua impressora 3D. Este firmware controla os motores de passo, regula a temperatura e é o que faz a sua impressora funcionar."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Uma impressão USB está em progresso, fechar o Cura interromperá esta impressão. Tem certeza?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Uma impressão ainda está em progresso. O Cura não pode iniciar outra impressão via USB até que a impressão anterior tenha completado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Impressão em Progresso"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Carregando máquinas..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Ajustando preferências..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Inicializando Máquina Ativa..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Inicializando gestor de máquinas..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Inicializando volume de impressão..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Configurando cena..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Carregando interface..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Inicializando motor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Somente um arquivo G-Code pode ser carregado por vez. Pulando importação de {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Não é possível abrir nenhum outro arquivo se G-Code estiver sendo carregado. Pulando importação de {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "O firmware que já vêm embutido nas novas impressoras funciona, mas novas versões costumam ter mais recursos, correções e melhorias."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Automaticamente atualizar Firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visual"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Carregar Firmware personalizado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "O perfil visual é projetado para imprimir protótipos e modelos virtuais com o objetivo de alta qualidade visual e de superfície."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "O firmware não pode ser atualizado porque não há conexão com a impressora."
+msgid "Engineering"
+msgstr "Engenharia"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "O perfil de engenharia é projetado para imprimir protótipos funcionais e partes de uso final com o objetivo de melhor precisão e tolerâncias mais estritas."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "O firmware não pode ser atualizado porque a conexão com a impressora não suporta atualização de firmware."
+msgid "Draft"
+msgstr "Rascunho"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Selecionar firmware personalizado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "O perfil de rascunho é projetado para imprimir protótipos iniciais e validações de conceito com o objetivo de redução significativa de tempo de impressão."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Atualização do Firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Não sobreposto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Tem certeza que deseja remover {0}? Isto não pode ser defeito!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Atualizando firmware."
+msgid "Unknown"
+msgstr "Desconhecido"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Atualização do Firmware completada."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "As impressoras abaixo não podem ser conectadas por serem parte de um grupo"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "A atualização de Firmware falhou devido a um erro desconhecido."
+msgid "Available networked printers"
+msgstr "Impressoras de rede disponíveis"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calculado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Por favor sincronize os perfis de material com suas impressoras antes de começar a imprimir."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Novos materiais instalados"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "A atualização de firmware falhou devido a um erro de comunicação."
+msgid "Custom Material"
+msgstr "Material Personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "A atualização de firmware falhou devido a um erro de entrada e saída."
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "A atualização de firmware falhou devido a firmware não encontrado."
+msgid "Custom profiles"
+msgstr "Perfis personalizados"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Abrir Projeto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Todos Os Tipos Suportados ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Atualizar existentes"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Todos Os Arquivos (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Criar novos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Falha em criar arquivo de materiais para sincronizar com impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Resumo - Projeto do Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Falha em carregar o arquivo de materiais para sincronizar com impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Ajustes da impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "A resposta da Digital Factory parece estar corrompida."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Como o conflito na máquina deve ser resolvido?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "A resposta da Digital Factory veio sem informações importantes."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tipo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Falha em conectar com a Digital Factory para sincronizar materiais com algumas das impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Grupo de Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Falha em conectar à Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Ajustes de perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Não pude criar arquivo do diretório de dados de usuário: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Como o conflito no perfil deve ser resolvido?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Tentativa de restauração de backup do Cura sem dados ou metadados apropriados."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nome"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Tentativa de restauração de backup do Cura de versão maior que a atual."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Objetivo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "O seguinte erro ocorreu ao tentar restaurar um backup do Cura:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Ausente no perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Achando novos lugares para objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 sobreposto"
-msgstr[1] "%1 sobrepostos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Buscando Localização"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivado de"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Não foi possível achar um lugar dentro do volume de construção para todos os objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 sobreposição"
-msgstr[1] "%1, %2 sobreposições"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Não Foi Encontrada Localização"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Ajustes de material"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Login falhou"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Como o conflito no material deve ser resolvido?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Parede Externa"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Visibilidade dos ajustes"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Paredes Internas"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Contorno"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Ajustes visíveis:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Preenchimento"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 de %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Preenchimento de Suporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Carregar um projeto limpará todos os modelos da mesa de impressão."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Interface de Suporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Abrir"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Suporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Complemento de Pós-Processamento"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Skirt (Saia)"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Scripts de Pós-Processamento"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Torre de Prime"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Adicionar um script"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Percurso"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Retrações"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Outros"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Ajustes"
+msgid "Group #{group_nr}"
+msgstr "Grupo #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Alterar scripts de pós-processamento ativos."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "As notas de lançamento não puderam ser abertas."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "O seguinte script está ativo:"
-msgstr[1] "Os seguintes scripts estão ativos:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Pular"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Converter imagem..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Fechar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "A distância máxima de cada pixel da \"Base\"."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Adicionar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Altura (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Finalizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "A altura-base da mesa de impressão em milímetros."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Cancelar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Próximo"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "A largura da mesa de impressão em milímetros."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "A altura do volume de impressão foi reduzida para que o valor da \"Sequência de Impressão\" impeça o eixo de colidir com os modelos impressos."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Largura (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Volume de Impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "A profundidade da mesa de impressão em milímetros"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "Não foi possível salvar o arquivo de materiais para {}:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profundidade (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Falha em salvar o arquivo de materiais"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Para litofanos, pixels escuros devem corresponder a locais mais espessos para conseguir bloquear mais luz. Para mapas de altura, pixels mais claros significam terreno mais alto, portanto tais pixels devem corresponder a locais mais espessos no modelo 3d gerado."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Erro desconhecido."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Mais escuro é mais alto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "O Arquivo Já Existe"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Mais claro é mais alto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "O arquivo <filename>{0}</filename> já existe. Tem certeza que quer sobrescrevê-lo?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Para litofanos, um modelo logarítmico simples para translucidez está disponível. Para mapas de altura os valores de pixels correspondem a alturas, linearmente."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "URL de arquivo inválida:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Linear"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Não Suportado"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Translucidez"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "A porcentagem de luz penetrando uma impressão com espessura de 1 milímetro. Abaixar este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Os ajustes foram alterados para seguir a disponibilidade de extrusores atuais:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmitância de 1mm (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Ajustes atualizados"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "A quantidade de suavização para aplicar na imagem."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extrusor(es) Desabilitado(s)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Suavização"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Falha ao exportar perfil para <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "Ok"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Falha ao exportar perfil para <filename>{0}</filename>: complemento escritor relatou erro."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Por favor selecionar quaisquer atualizações feitas nesta Ultimaker Original"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Perfil exportado para <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Mesa de Impressão Aquecida (kit Oficial ou auto-construído)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Exportação concluída"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivelamento da mesa de impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Falha ao importar perfil de <filename>{0}</filename>: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Para garantir que suas impressões saiam ótimas, você deve agora ajustar sua mesa de impressão. Quando você clicar em 'Mover para a Posição Seguinte', o bico se moverá para posições diferentes que podem ser ajustadas."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Não foi possível importar perfil de <filename>{0}</filename> antes de uma impressora ser adicionada."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Para cada posição; insira um pedaço de papel abaixo do bico e ajuste a altura da mesa de impressão. A altura da mesa de impressão está adequada quando o papel for levemente pressionado pela ponta do bico."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Não há perfil personalizado a importar no arquivo <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Iniciar Nivelamento da Mesa de Impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Erro ao importar perfil de <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Mover pra a Posição Seguinte"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Este perfil <filename>{0}</filename> contém dados incorretos, não foi possível importá-lo."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Mais informações em coleção anônima de dados"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Erro ao importar perfil de <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "O Ultimaker Cura coleta dados anônimos para poder aprimorar a qualidade de impressão e experiência do usuário. Abaixo segue um exemplo de todos os dados que são compartilhados:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "Perfil {0} importado com sucesso."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Recusar enviar dados anônimos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "Arquivo {0} não contém nenhum perfil válido."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Permitir enviar dados anônimos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "O Perfil {0} tem tipo de arquivo desconhecido ou está corrompido."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Mercado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Perfil personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Você precisará reiniciar o Cura para que as alterações tenham efeito."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Falta um tipo de qualidade ao Perfil."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Sair de %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Não há impressora ativa ainda."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Instalar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "Não foi possível adicionar o perfil."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Instalado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "Tipo de qualidade '{0}' não é compatível com a definição de máquina ativa atual '{1}'."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Alerta: o perfil não está visível porque seu tipo de qualidade '{0}' não está disponível para a configuração atual. Altere para uma combinação de material/bico que possa usar este tipo de qualidade."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Ir ao Mercado Web"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Multiplicando e colocando objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Buscar materiais"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Colocando Objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilidade"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Colocando Objeto"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Máquina"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Não foi possível iniciar processo de sign-in. Verifique se outra tentativa de sign-in ainda está ativa."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Plataforma de Impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Não foi possível contactar o servidor de contas da Ultimaker."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Suporte"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "Login falhou"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualidade"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Não foi possível ler a resposta."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Documento de Dados Técnicos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "O estado provido não está correto."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Documento de Dados de Segurança"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Tempo esgotado ao autenticar com o servidor da conta."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Diretrizes de Impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Por favor dê as permissões requeridas ao autorizar esta aplicação."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Sítio Web"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Algo inesperado aconteceu ao tentar login, por favor tente novamente."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Entrar</a> na conta é necessário para instalar ou atualizar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "O Cura não consegue iniciar"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Comprar rolos de material</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Oops, o Ultimaker Cura encontrou algo que não parece estar correto.</p></b>\n"
+"                    <p>Encontramos um erro irrecuperável durante a inicialização. Ele foi possivelmente causado por arquivos de configuração incorretos. Sugerimos salvar e restabelecer sua configuração.</p>\n"
+"                    <p>Cópias salvas podem ser encontradas na pasta de configuração.</p>\n"
+"                    <p>Por favor nos envie este Relatório de Falha para consertar o problema.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Atualizar"
+msgid "Send crash report to Ultimaker"
+msgstr "Enviar relatório de falha à Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Atualizando"
+msgid "Show detailed crash report"
+msgstr "Exibir relatório de falha detalhado"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Atualizado"
+msgid "Show configuration folder"
+msgstr "Mostrar a pasta de configuração"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Voltar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Complementos"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiais"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Instalado"
+msgid "Backup and Reset Configuration"
+msgstr "Salvar e Restabelecer Configuração"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Será instalado ao reiniciar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Relatório de Problema"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Entrar</a> na conta é necessário para atualizar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Um erro fatal ocorreu no Cura. Por favor nos envie este Relatório de Falha para consertar o problema</p></b>\n"
+"            <p>Por favor use o botão \"Enviar relatório\" para publicar um relatório de erro automaticamente em nossos servidores</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgrade"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Informação do Sistema"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Desinstalar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Desconhecida"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contribuições da Comunidade"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Versão do Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Complementos da Comunidade"
+msgid "Cura language"
+msgstr "Linguagem do Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiais Genéricos"
+msgid "OS language"
+msgstr "Linguagem do SO"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Obtendo pacotes..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Plataforma"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Sítio Web"
+msgid "Qt version"
+msgstr "Versão do Qt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "Email"
+msgid "PyQt version"
+msgstr "Versão do PyQt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Por favor se logue para adquirir complementos e materiais verificados para o Ultimaker Cura Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Versão"
+msgid "Not yet initialized<br/>"
+msgstr "Ainda não inicializado<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Última atualização"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>Versão da OpenGL: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marca"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>Fornecedor da OpenGL: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Downloads"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>Renderizador da OpenGL: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Complementos instalados"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Traceback do erro"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Nenhum complemento foi instalado."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Registros"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Materiais instalados"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Enviar relatório"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Nenhum material foi instalado."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Por favor certifique-se que sua impressora está conectada>\n"
+"- Verifique se ela está ligada.\n"
+"- Verifique se ela está conectada à rede.\n"
+"- Verifique se você está logado para descobrir impressoras conectadas à nuvem."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Complementos empacotados"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Por favor conecte sua impressora à rede."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Materiais empacotados"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Ver manuais de usuário online"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Não foi possível conectar-se à base de dados de Pacotes do Cura. Por favor verifique sua conexão."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Para monitorar sua impressão pelo Cura, por favor conecte a impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Você precisa aceitar a licença para que o pacote possa ser instalado"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Selecionar Ajustes a Personalizar para este modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Alterações da sua conta"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtrar..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Dispensar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Exibir tudo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Próximo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Tipo de Malha"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Os seguintes pacotes serão adicionados:"
+msgid "Normal model"
+msgstr "Modelo normal"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Os seguintes pacotes não podem ser instalados por incompatibilidade de versão do Cura:"
+msgid "Print as support"
+msgstr "Imprimir como suporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Confirme a desinstalação"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Modificar ajustes para sobreposições"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Você está desinstalando material e/ou perfis que ainda estão em uso. Confirmar irá restaurar os materiais e perfis seguintes a seus defaults."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "Não suportar sobreposições"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiais"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Somente malha de preenchimento"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Perfis"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Malha de corte"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Confirmar"
+msgid "Select settings"
+msgstr "Selecionar ajustes"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Atualizar Firmware"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Esquema de Cores"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "O firmware é o software rodando diretamente no maquinário de sua impressora 3D. Este firmware controla os motores de passo, regula a temperatura e é o que faz a sua impressora funcionar."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Cor do Material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "O firmware que já vêm embutido nas novas impressoras funciona, mas novas versões costumam ter mais recursos, correções e melhorias."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Tipo de Linha"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Automaticamente atualizar Firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Velocidade"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Carregar Firmware personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Espessura de Camada"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "O firmware não pode ser atualizado porque não há conexão com a impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Largura de Extrusão"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "O firmware não pode ser atualizado porque a conexão com a impressora não suporta atualização de firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Fluxo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Selecionar firmware personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Modo de Compatibilidade"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Atualização do Firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Percursos"
+msgid "Updating firmware."
+msgstr "Atualizando firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Assistentes"
+msgid "Firmware update completed."
+msgstr "Atualização do Firmware completada."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Perímetro"
+msgid "Firmware update failed due to an unknown error."
+msgstr "A atualização de Firmware falhou devido a um erro desconhecido."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Preenchimento"
+msgid "Firmware update failed due to an communication error."
+msgstr "A atualização de firmware falhou devido a um erro de comunicação."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "Inícios"
+msgid "Firmware update failed due to an input/output error."
+msgstr "A atualização de firmware falhou devido a um erro de entrada e saída."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Somente Exibir Camadas Superiores"
+msgid "Firmware update failed due to missing firmware."
+msgstr "A atualização de firmware falhou devido a firmware não encontrado."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Exibir 5 Camadas Superiores Detalhadas"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Abortado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Topo / Base"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Finalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Parede Interna"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Preparando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "mín"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Abortando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "máx"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Falhado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Pausando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Pausado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Continuando..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Necessária uma ação"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Termina %1 em %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Gerir Impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Vidro"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Por favor atualize o firmware de sua impressora parar gerir a fila remotamente."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Fontes de webcam para impressoras de nuvem não podem ser vistas pelo Ultimaker Cura. Clique em \"Gerenciar impressora\" para visitar a Ultimaker Digital Factory e visualizar esta webcam."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Carregando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Indisponível"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Inacessivel"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Ocioso"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Preparando..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Imprimindo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Sem Título"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anônimo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Requer mudanças na configuração"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Detalhes"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Impressora indisponível"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Primeira disponível"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Enfileirados"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gerir no navegador"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Não há trabalhos de impressão na fila. Fatie e envie um trabalho para adicioná-lo."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Trabalhos de impressão"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Tempo total de impressão"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Esperando por"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Imprimir pela rede"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Imprimir"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Seleção de impressora"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Alterações de Configuração"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Sobrepor"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "A impressora associada, %1, requer a seguinte alteração de configuração:"
 msgstr[1] "A impressora associada, %1, requer as seguintes alterações de configuração:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "A impressora %1 está associada, mas o trabalho contém configuração de material desconhecida."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Alterar material %1 de %2 para %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "Carregar %3 como material %1 (isto não pode ser sobreposto)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Alterar núcleo de impressão %1 de %2 para %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Alterar mesa de impressão para %1 (Isto não pode ser sobreposto)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Sobrepor irá usar os ajustes especificados com a configuração existente da impressora. Isto pode causar falha da impressão."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Alumínio"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Finalizado"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Abortando..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Abortado"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Falhado"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Pausando..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Pausado"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Continuando..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Imprimir pela rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Necessária uma ação"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Imprimir"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Termina %1 em %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Seleção de impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Conectar a Impressora de Rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Para imprimir diretamente na sua impressora pela rede, certifique-se que ela esteja conectada à rede usando um cabo de rede ou conectando sua impressora à sua WIFI. Se você não conectar Cura à sua impressora, você ainda pode usar um drive USB ou SDCard para transferir arquivos G-Code a ela."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Selecione sua impressora da lista abaixo:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Editar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Remover"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Atualizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Se sua impressora não está listada, leia o <a href='%1'>guia de resolução de problemas de impressão em rede</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tipo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Versão do firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Endereço"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Esta impressora não está configurada para hospedar um grupo de impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Esta impressora é a hospedeira de um grupo de %1 impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "A impressora neste endereço ainda não respondeu."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Conectar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Endereço IP inválido"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Por favor entre um endereço IP válido."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Endereço da Impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Entre o endereço IP da sua impressora na rede."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Impressora indisponível"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "Primeira disponível"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Mover para o topo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Remover"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Continuar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Pausando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Continuando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pausar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Abortando..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Abortar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Você tem certeza que quer mover %1 para o topo da fila?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Move o trabalho de impressão para o topo da fila"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Você tem certeza que quer remover %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Remover trabalho de impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Você tem certeza que quer abortar %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Abortar impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "Enfileirados"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gerir no navegador"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Não há trabalhos de impressão na fila. Fatie e envie um trabalho para adicioná-lo."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Trabalhos de impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Tempo total de impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Esperando por"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Esquema de Cores"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Cor do Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Tipo de Linha"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Velocidade"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Espessura de Camada"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Largura de Extrusão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Fluxo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Modo de Compatibilidade"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Percursos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Assistentes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Perímetro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Preenchimento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "Inícios"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Somente Exibir Camadas Superiores"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Exibir 5 Camadas Superiores Detalhadas"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Topo / Base"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Parede Interna"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "mín"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "máx"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Por favor certifique-se que sua impressora está conectada>\n"
-"- Verifique se ela está ligada.\n"
-"- Verifique se ela está conectada à rede.\n"
-"- Verifique se você está logado para descobrir impressoras conectadas à nuvem."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Por favor conecte sua impressora à rede."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Altura (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Ver manuais de usuário online"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "A distância máxima de cada pixel da \"Base\"."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Para monitorar sua impressão pelo Cura, por favor conecte a impressora."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Algumas coisas podem ser problemáticas nesta impressão. Clique para ver dicas de correção."
+msgid "The base height from the build plate in millimeters."
+msgstr "A altura-base da mesa de impressão em milímetros."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Largura (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Visão 3D"
+msgid "The width in millimeters on the build plate"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profundidade (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Viso de Frente"
+msgid "The depth in millimeters on the build plate"
+msgstr "A profundidade da mesa de impressão em milímetros"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Mais escuro é mais alto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Mais claro é mais alto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Visão de Cima"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Para litofanos, pixels escuros devem corresponder a locais mais espessos para conseguir bloquear mais luz. Para mapas de altura, pixels mais claros significam terreno mais alto, portanto tais pixels devem corresponder a locais mais espessos no modelo 3d gerado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Linear"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Translucidez"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Visão à Esquerda"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Para litofanos, um modelo logarítmico simples para translucidez está disponível. Para mapas de altura os valores de pixels correspondem a alturas, linearmente."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmitância de 1mm (%)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Visão à Direita"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "A porcentagem de luz penetrando uma impressão com espessura de 1 milímetro. Abaixar este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Lista de objetos"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Suavização"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "A quantidade de suavização para aplicar na imagem."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Mercado"
+msgid "OK"
+msgstr "Ok"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "Arquivo (&F)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Abrir Projeto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Editar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Atualizar existentes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Ver"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Criar novos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "Aju&stes"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Resumo - Projeto do Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensões"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Como o conflito na máquina deve ser resolvido?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&referências"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Ajustes da impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "Ajuda (&H)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tipo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Novo projeto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Grupo de Impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Tem certeza que quer iniciar novo projeto? Isto esvaziará a mesa de impressão e quaisquer ajustes não salvos."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Como o conflito no perfil deve ser resolvido?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Fatiando..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Ajustes de perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Não foi possível fatiar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nome"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Objetivo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Ausente no perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 sobreposto"
+msgstr[1] "%1 sobrepostos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivado de"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 sobreposição"
+msgstr[1] "%1, %2 sobreposições"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Como o conflito no material deve ser resolvido?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Ajustes de material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Visibilidade dos ajustes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Ajustes visíveis:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 de %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Carregar um projeto limpará todos os modelos da mesa de impressão."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Abrir"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Processando"
+msgid "Want more?"
+msgstr "Quer mais?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Fatiar"
+msgid "Backup Now"
+msgstr "Backup Agora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Inicia o processo de fatiamento"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Auto Backup"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Cancelar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Criar um backup automaticamente toda vez que o Cura iniciar."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Estimativa de tempo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Versão do Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Estimativa de material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Máquinas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Perfis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Sem estimativa de tempo disponível"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Complementos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Sem estimativa de custo disponível"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Restaurar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Apagar o Backup"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Você tem certeza que deseja apagar este backup? Isto não pode ser desfeito."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Restaurar Backup"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Você precisará reiniciar o Cura antes que seu backup seja restaurado. Deseja fechar o Cura agora?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Fazer backup e sincronizar os ajustes do Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Pré-visualização"
+msgid "Sign in"
+msgstr "Entrar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Adicionar uma impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Meus backups"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Você não tem nenhum backup atualmente. Use o botão 'Backup Agora' para criar um."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Durante a fase de pré-visualização, você estará limitado a 5 backups visíveis. Remova um backup para ver os mais antigos."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Backups do Cura"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Mais informações em coleção anônima de dados"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "O Ultimaker Cura coleta dados anônimos para poder aprimorar a qualidade de impressão e experiência do usuário. Abaixo segue um exemplo de todos os dados que são compartilhados:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Recusar enviar dados anônimos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Permitir enviar dados anônimos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Complemento de Pós-Processamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Adicionar uma impressora de rede"
+msgid "Post Processing Scripts"
+msgstr "Scripts de Pós-Processamento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Adicionar um script"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Adicionar uma impressora local"
+msgid "Settings"
+msgstr "Ajustes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Alterar scripts de pós-processamento ativos."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "O seguinte script está ativo:"
+msgstr[1] "Os seguintes scripts estão ativos:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Adicionar uma impressora de Nuvem"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Por favor selecionar quaisquer atualizações feitas nesta Ultimaker Original"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Aguardando resposta da Nuvem"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Mesa de Impressão Aquecida (kit Oficial ou auto-construído)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivelamento da mesa de impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Nenhuma impressora encontrada em sua conta?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Para garantir que suas impressões saiam ótimas, você deve agora ajustar sua mesa de impressão. Quando você clicar em 'Mover para a Posição Seguinte', o bico se moverá para posições diferentes que podem ser ajustadas."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "As seguintes impressoras da sua conta foram adicionadas ao Cura:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Para cada posição; insira um pedaço de papel abaixo do bico e ajuste a altura da mesa de impressão. A altura da mesa de impressão está adequada quando o papel for levemente pressionado pela ponta do bico."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Iniciar Nivelamento da Mesa de Impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Mover pra a Posição Seguinte"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Adicionar impressora manualmente"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Adicionar impressora por endereço IP"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Entre o endereço IP de sua impressora."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Adicionar"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Não foi possível conectar ao dispositivo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Sair de %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Não consegue conectar à sua impressora Ultimaker?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "A impressora neste endereço ainda não respondeu."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Esta impressora não pode ser adicionada porque é uma impressora desconhecida ou porque não é o host do grupo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Voltar"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Conectar"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Contrato de Usuário"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Rejeitar e fechar"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Bem-vindo ao Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
-msgstr "Por favor siga estes passos para configurar o Ultimaker Cura. Isto tomará apenas alguns momentos."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Começar"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Entre na plataforma Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Adicionar ajustes de materiais e plugins do Marketplace"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Fazer backup e sincronizar seus ajustes de materiais e plugins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Compartilhe ideias e consiga ajuda de mais de 48.000 usuários da Comunidade Ultimaker"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Pular"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Recusar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Criar uma conta Ultimaker gratuita"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Ajustes do Bico"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabricante"
+msgid "Nozzle size"
+msgstr "Tamanho do bico"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor do perfil"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Nome da impressora"
+msgid "Compatible material diameter"
+msgstr "Diâmetro de material compatível"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Por favor dê um nome à sua impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Deslocamento X do Bico"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Não foi encontrada nenhuma impressora em sua rede."
+msgid "Nozzle offset Y"
+msgstr "Deslocamento Y do Bico"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Atualizar"
+msgid "Cooling Fan Number"
+msgstr "Número da Ventoinha de Resfriamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "G-Code Inicial do Extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "G-Code Final do Extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Ajustes de Impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Adicionar impressora por IP"
+msgid "X (Width)"
+msgstr "X (largura)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Adicionar impressora de nuvem"
+msgid "Y (Depth)"
+msgstr "Y (Profundidade)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Resolução de problemas"
+msgid "Z (Height)"
+msgstr "Z (Altura)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Nos ajude a melhor o Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "Forma da plataforma de impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "O Ultimaker Cura coleta dados anônimos para melhor a qualidade de impressão e experiência do usuário, incluindo:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Origem no centro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Tipos de máquina"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Mesa aquecida"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Uso do material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volume de construção aquecido"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Número de fatias"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Sabor de G-Code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Ajustes de impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Ajustes da Cabeça de Impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Dados coletados pelo Ultimaker Cura não conterão nenhuma informação pessoal."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X mín"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Mais informações"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y mín"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "O Que Há de Novo"
+msgid "X max"
+msgstr "X máx"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Vazio"
+msgid "Y max"
+msgstr "Y máx"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Notas de lançamento"
+msgid "Gantry Height"
+msgstr "Altura do Eixo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Número de Extrusores"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Aplicar deslocamentos de Extrusão ao G-Code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-Code Inicial"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-Code Final"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "Minhas impressoras"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Monitora as impressoras na Ultimaker Digital Factory."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Cria projetos de impressão na Digital Library."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Trabalhos de impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Monitora trabalhos de impressão e reimprime a partir do histórico."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Estende o Ultimaker Cura com complementos e perfis de material."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Torne-se um especialista em impressão 3D com Ultimaker e-learning."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Suporte Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Saiba como começar com o Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Fazer uma pergunta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Consultar a Comunidade Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Relatar um problema"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Deixe os desenvolvedores saberem que algo está errado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Visita o website da Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Imprimir Modelo Selecionado com %1"
+msgstr[1] "Imprimir Modelos Selecionados com %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "Aju&stes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Novo projeto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Tem certeza que quer iniciar novo projeto? Isto esvaziará a mesa de impressão e quaisquer ajustes não salvos."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Mercado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Mesa de Impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "A temperatura-alvo da mesa aquecida. A mesa aquecerá ou resfriará para esta temperatura. Se for zero, o aquecimento é desligado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "A temperatura atual da mesa aquecida."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "A temperatura em que pré-aquecer a mesa."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Cancelar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Pré-aquecer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Aquecer a mesa antes de imprimir. Você pode continuar ajustando sua impressão enquanto ela está aquecendo, e não terá que esperar o aquecimento quando estiver pronto pra imprimir."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "A impressora não está conectada."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Controle da Impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Posição de Trote"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Distância de Trote"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Enviar G-Code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Enviar comando G-Code personalizado para a impressora conectada. Pressione 'enter' para enviar o comando."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "A temperatura-alvo do hotend. O hotend vai aquecer ou esfriar na direção desta temperatura. Se for zero, o aquecimento de hotend é desligado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "A temperatura atual deste hotend."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "A temperatura com a qual pré-aquecer o hotend."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Aquece o hotend com antecedência antes de imprimir. Você pode continuar ajustando sua impressão enquanto está aquecendo e não terá que esperar que o hotend termine o aquecimento quando estiver pronto para imprimir."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "A cor do material neste extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "O material neste extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "O bico inserido neste extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Abrir arquivo de projeto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Este é um arquivo de projeto do Cura. Gostaria de abri-lo como um projeto ou importar os modelos dele?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Lembrar minha escolha"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Abrir como projeto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importar modelos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Salvar Projeto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Extrusor %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Não exibir resumo do projeto ao salvar novamente"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Salvar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Abrir arquivo(s)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Encontramos um ou mais arquivo(s) de projeto entre os arquivos que você selecionou. Você só pode abrir um arquivo de projeto por vez. Sugerimos que somente importe modelos destes arquivos. Gostaria de prosseguir?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Importar todos como modelos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Sobre %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versão: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Solução completa para impressão 3D com filamento fundido."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3615,2199 +3597,2383 @@ msgstr ""
 "Cura é desenvolvido pela Ultimaker B.V. em cooperação com a comunidade.\n"
 "Cura orgulhosamente usa os seguintes projetos open-source:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interface Gráfica de usuário"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Framework de Aplicações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Gerador de G-Code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Biblioteca de comunicação interprocessos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Linguagem de Programação"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Framework Gráfica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Ligações da Framework Gráfica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Biblioteca de Ligações C/C++"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formato de Intercâmbio de Dados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Biblioteca de suporte para computação científica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Biblioteca de suporte para matemática acelerada"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Biblioteca de suporte para manuseamento de arquivos STL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Biblioteca de suporte para manuseamento de objetos planares"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Biblioteca de suporte para manuseamento de malhas triangulares"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Biblioteca de suporte para manuseamento de arquivos 3MF"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Biblioteca de suporte para streaming e metadados de arquivo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Biblioteca de comunicação serial"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Biblioteca de descoberta 'ZeroConf'"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Biblioteca de recorte de polígonos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Verificador de tipos estáticos para Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificados raiz para validar confiança de SSL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Biblioteca de rastreamento de Erros de Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Biblioteca de empacotamento Polygon, desenvolvido pela Prusa Research"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Ligações de Python para a libnest2d"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Biblioteca de suporte para acesso ao chaveiro do sistema"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Extensões de python para o Microsoft Windows"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Fonte"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Ícones SVG"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Implementação de aplicação multidistribuição em Linux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Abrir arquivo(s)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Encontramos um ou mais arquivo(s) de projeto entre os arquivos que você selecionou. Você só pode abrir um arquivo de projeto por vez. Sugerimos que somente importe modelos destes arquivos. Gostaria de prosseguir?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Importar todos como modelos"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Salvar Projeto"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Extrusor %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & material"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Material"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Não exibir resumo do projeto ao salvar novamente"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Salvar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Descartar ou Manter alterações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"Você personalizou alguns ajustes de perfil.\n"
-"Gostaria de manter estes ajustes alterados após mudar de perfis?\n"
-"Alternativamente, você pode descartar as alterações para carregar os defaults de '%1'."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Ajustes de perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Alterações atuais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Sempre perguntar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Descartar e não perguntar novamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Manter e não perguntar novamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Descartar alterações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Manter alterações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Abrir arquivo de projeto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "Sem itens para selecionar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Este é um arquivo de projeto do Cura. Gostaria de abri-lo como um projeto ou importar os modelos dele?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Abrir Arquivo(s)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Lembrar minha escolha"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Abrir &Recente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Abrir como projeto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Ajustes Visíveis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importar modelos"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Encolher Todas As Categorias"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gerenciar Visibilidade dos Ajustes..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Definir Como Extrusor Ativo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Habilitar Extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Desabilitar Extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoritos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Genérico"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "Ajuda (&H)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "Arquivo (&F)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Salvar Projeto..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportar..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Exportar Seleção..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&referências"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Editar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "Im&pressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Impressoras habilitadas pela rede"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Impressoras locais"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensões"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configurações"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Impressão ativa"
+msgid "Loading available configurations from the printer..."
+msgstr "Carregando configurações disponíveis da impressora..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Nome do Trabalho"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "As configurações não estão disponíveis porque a impressora está desconectada."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tempo de Impressão"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Esta configuração não está disponível porque %1 não foi reconhecido. Por favor visite %2 para baixar o perfil de materil correto."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Tempo restante estimado"
+msgid "Marketplace"
+msgstr "Mercado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "A impressora de nuvem está offline. Por favor verifique se a impressora está ligada e conectada à internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "A configuração deste extrusor não é permitida e proíbe o fatiamento."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Esta impressora não está vinculada à sua conta. Por favor visite a Ultimaker Digital Factory para estabelecer uma conexão."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "Não há perfis correspondendo à configuração deste extrusor."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "A conexão de nuvem está indisponível. Por favor se logue para se conectar à impressora de nuvem."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Selecione configuração"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "A conexão de nuvem está indisponível. Por favor verifique sua conexão de internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configurações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Adicionar impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Gerenciar impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Impressoras conectadas"
+msgid "Enabled"
+msgstr "Habilitado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Impressoras pré-ajustadas"
+msgid "Material"
+msgstr "Material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Ajustes de impressão"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Use cola para melhor aderência com essa combinação de materiais."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Configuração de Impressão desabilitada. O arquivo de G-Code não pode ser modificado."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Imprimir Modelo Selecionado Com:"
+msgstr[1] "Imprimir Modelos Selecionados Com:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Multiplicar Modelo Selecionado"
+msgstr[1] "Multiplicar Modelos Selecionados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Perfil"
+msgid "Number of Copies"
+msgstr "Número de Cópias"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Salvar Projeto..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Ver"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "Posição da &câmera"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Visão de câmera"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspectiva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Ortográfico"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Tipo de Visão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Entre na plataforma Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Alguns ajustes/sobreposições têm valores diferentes dos que estão armazenados no perfil.\n"
-"\n"
-"Clique para abrir o gerenciador de perfis."
+"- Adicione perfis de material e plug-ins do Marketplace\n"
+"- Faça backup e sincronize seus perfis de materiais e plugins\n"
+"- Compartilhe ideias e consiga ajuda de mais de 48.000 usuários da comunidade Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Perfis personalizados"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Criar uma conta Ultimaker gratuita"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Descartar ajustes atuais"
+msgid "Sign in"
+msgstr "Entrar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Última atualização: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Recomendado"
+msgid "Ultimaker Account"
+msgstr "Conta na Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Personalizado"
+msgid "Sign Out"
+msgstr "Deslogar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Verificando..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Conta sincronizada"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Alguma coisa deu errado..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Instalação aguardando atualizações"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Verificar atualizações da conta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Fatiando..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Não foi possível fatiar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Processando"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Fatiar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Inicia o processo de fatiamento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Cancelar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Estimativa de tempo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Estimativa de material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Sem estimativa de tempo disponível"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Sem estimativa de custo disponível"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Pré-visualização"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Este pacote será instalado após o reinício."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Geral"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Ajustes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Impressoras"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiais"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Perfis"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Fechando %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Tem certeza que quer sair de %1?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Instalar Pacote"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Abrir Arquivo(s)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Encontramos um ou mais arquivos de G-Code entre os arquivos que você selecionou. Você só pode abrir um arquivo de G-Code por vez. Se você quiser abrir um arquivo de G-Code, por favor selecione somente um."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Adicionar Impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Novidades"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "On"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Off"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Experimental"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Ajustes de impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Configuração de Impressão desabilitada. O arquivo de G-Code não pode ser modificado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Recomendado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personalizado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "Não há perfil %1 para a configuração no extrusor %2. O objetivo default será usado no lugar dele"
 msgstr[1] "Não há perfis %1 para a configurações nos extrusores %2. O objetivo default será usado no lugar deles"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Perfis"
+msgid "Gradual infill"
+msgstr "Preenchimento gradual"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Você modificou alguns ajustes de perfil. Se você quiser alterá-los, use o modo personalizado."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Preenchimento gradual aumentará gradualmente a quantidade de preenchimento em direção ao topo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Suporte"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Gera estrutura que suportarão partes do modelo que têm seções pendentes. Sem estas estruturas, tais partes desabariam durante a impressão."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Preenchimento gradual"
+msgid "Profiles"
+msgstr "Perfis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Preenchimento gradual aumentará gradualmente a quantidade de preenchimento em direção ao topo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Você modificou alguns ajustes de perfil. Se você quiser alterá-los, use o modo personalizado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Aderência"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Habilita imprimir um brim (bainha) ou raft (jangada). Adicionará uma área chata em volta ou sob o objeto que é fácil de remover após a impressão ter finalizado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Salvar Projeto..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Perfis personalizados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Impressoras habilitadas pela rede"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Descartar ajustes atuais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Impressoras locais"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Alguns ajustes/sobreposições têm valores diferentes dos que estão armazenados no perfil.\n"
+"\n"
+"Clique para abrir o gerenciador de perfis."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoritos"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Ajustes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Genérico"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Imprimir Modelo Selecionado Com:"
-msgstr[1] "Imprimir Modelos Selecionados Com:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Atual"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplicar Modelo Selecionado"
-msgstr[1] "Multiplicar Modelos Selecionados"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Número de Cópias"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Salvar Projeto..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportar..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Exportar Seleção..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Visibilidade dos Ajustes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configurações"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personalizado"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Verificar tudo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Ativar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Renomear"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Confirmar Mudança de Diâmetro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "O novo diâmetro de filamento está ajustado em %1 mm, que não é compatível com o extrusor atual. Você deseja continuar?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Impressora"
+msgid "Display Name"
+msgstr "Exibir Nome"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Habilitado"
+msgid "Brand"
+msgstr "Marca"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Material"
+msgid "Material Type"
+msgstr "Tipo de Material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Use cola para melhor aderência com essa combinação de materiais."
+msgid "Color"
+msgstr "Cor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "A configuração deste extrusor não é permitida e proíbe o fatiamento."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "Não há perfis correspondendo à configuração deste extrusor."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Propriedades"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Selecione configuração"
+msgid "Density"
+msgstr "Densidade"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configurações"
+msgid "Diameter"
+msgstr "Diâmetro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Carregando configurações disponíveis da impressora..."
+msgid "Filament Cost"
+msgstr "Custo do Filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "As configurações não estão disponíveis porque a impressora está desconectada."
+msgid "Filament weight"
+msgstr "Peso do Filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Esta configuração não está disponível porque %1 não foi reconhecido. Por favor visite %2 para baixar o perfil de materil correto."
+msgid "Filament length"
+msgstr "Comprimento do Filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Mercado"
+msgid "Cost per Meter"
+msgstr "Custo por Metro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Abrir Arquivo(s)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Este material está vinculado a %1 e compartilha algumas de suas propriedades."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "Im&pressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Desvincular Material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Descrição"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Definir Como Extrusor Ativo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informação sobre Aderência"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Habilitar Extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Informação"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Desabilitar Extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Sincronizar materiais com impressoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Abrir &Recente"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Sincronizar materiais com impressoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Ajustes Visíveis"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "Seguindo alguns passos simples, você conseguirá sincronizar todos os seus perfis de material com suas impressoras."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Encolher Todas As Categorias"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "Por que eu preciso sincronizar perfis de material?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gerenciar Visibilidade dos Ajustes..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Iniciar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "Posição da &câmera"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Entrar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Visão de câmera"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Para automaticamente sincronizar os perfis de material com todas as suas impressoras conectadas à Digital Factory, você precisa estar logado pelo Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspectiva"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Sincronizar materiais usando USB"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortográfico"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "Os seguintes materiais receberão novos perfis de material:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "Plataforma de Impressão (&B)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "Algo de errado aconteceu ao enviar os materiais às impressoras."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Tipo de Visão"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "Perfis de material sincronizados com sucesso com as seguintes impressoras:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Está impresso como suporte."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Resolução de problemas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Outros modelos se sobrepondo a esse modelo foram modificados."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "Impressoras faltando?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Preenchimento se sobrepondo a este modelo foi modificado."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Certifique-se de que todas as suas impressoras estejam LIGADAS e conectadas à Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Sobreposições neste modelo não são suportadas."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Atualizar Lista"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Sobrepõe %1 ajuste."
-msgstr[1] "Sobrepõe %1 ajustes."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Tentar novamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Perfis"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Feito"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Ativar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Sincronizar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Criar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "Sincronizando"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "Nenhuma impressora encontrada"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Parece que você não tem impressoras compatíveis conectadas à Digital Factory. Certifique-se que sua impressora esteja conectada e rodando o firmware mais recente."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Aprenda como conectar sua impressora à Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Atualizar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Sincronizar perfis de material via USB"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Siga os passos seguintes para carregar os perfis de material novos na sua impressora."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Clique no botão de exportar arquivo de material."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "Grava o arquivo .umm em um pendrive USB."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "Insira o pendrive USB na sua impressora e faça o procedimento de carregar novos perfis de material."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Como carregar novos perfis de material na minha impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Voltar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Exportar arquivo de material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Exportar Todos Os Materiais"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplicar"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Renomear"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Importar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Exportar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Criar Perfil"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Por favor dê um nome a este perfil."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplicar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplicar Perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exportar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Confirmar Remoção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Tem certeza que deseja remover %1? Isto não poderá ser desfeito!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Renomear Perfil"
+msgid "Import Material"
+msgstr "Importar Material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importar Perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Material <filename>%1</filename> importado com sucesso"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Não foi possível importar material <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exportar Perfil"
+msgid "Export Material"
+msgstr "Exportar Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Falha em exportar material para <filename>%1</filename>: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Material exportado para <filename>%1</filename> com sucesso"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Impressora: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Atualizar perfil com ajustes/sobreposições atuais"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Este perfil usa os defaults especificados pela impressora, portanto não tem ajustes/sobreposições na lista abaixo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Seus ajustes atuais coincidem com o perfil selecionado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Ajustes globais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Geral"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Criar Perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Por favor dê um nome a este perfil."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exportar Perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplicar Perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Renomear Perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importar Perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Moeda:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Tema:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Você precisará reiniciar a aplicação para que essas mudanças tenham efeito."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Fatiar automaticamente quando mudar ajustes."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Fatiar automaticamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportamento da área de visualização"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Ressaltar áreas sem suporte do modelo em vermelho. Sem suporte, estas áreas não serão impressas corretamente."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Exibir seções pendentes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Ressalta superfícies faltantes ou incorretas do modelo usando sinais de alerta. Os caminhos de extrusão frequentemente terão partes da geometria pretendida ausentes."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Exibir erros de modelo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Move a câmera de modo que o modelo fique no centro da visão quando for selecionado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centralizar câmera quanto o item é selecionado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "O comportamento default de ampliação deve ser invertido?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverter a direção da ampliação de câmera."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "A ampliação (zoom) deve se mover na direção do mouse?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Ampliar com o mouse não é suportado na perspectiva ortográfica."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Ampliar na direção do mouse"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Os modelos devem ser movidos na plataforma de modo que não se sobreponham?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Assegurar que os modelos sejam mantidos separados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Os modelos devem ser movidos pra baixo pra se assentar na plataforma de impressão?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Automaticamente fazer os modelos caírem na mesa de impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Exibir mensagem de alerta no leitor de G-Code."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Mensagem de alera no leitor de G-Code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "A Visão de Camada deve ser forçada a ficar em modo de compatibilidade?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forçar modo de compatibilidade da visão de camadas (requer reinício)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "O Cura deve abrir no lugar onde foi fechado?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurar posição da janela no início"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Que tipo de renderização de câmera deve ser usada?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Renderização de câmera:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Perspectiva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Ortográfica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Abrindo e salvando arquivos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Arquivos da área de trabalho ou de aplicações externas devem ser abertos na mesma instância do Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Usar uma única instância do Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "A plataforma de construção deve ser esvaziada antes de carregar um modelo novo na instância única do Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Limpar a plataforma de impressão antes de carregar modelo em instância única"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Os modelos devem ser redimensionados dentro do volume de impressão se forem muito grandes?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Redimensionar modelos grandes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Um modelo pode ser carregado diminuto se sua unidade for por exemplo em metros ao invés de milímetros. Devem esses modelos ser redimensionados?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Redimensionar modelos minúsculos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Os modelos devem ser selecionados após serem carregados?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Selecionar modelos ao carregar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Um prefixo baseado no nome da impressora deve ser adicionado ao nome do trabalho de impressão automaticamente?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Adicionar prefixo de máquina ao nome do trabalho"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Um resumo deve ser exibido ao salvar um arquivo de projeto?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Exibir diálogo de resumo ao salvar projeto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportamento default ao abrir um arquivo de projeto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportamento default ao abrir um arquivo de projeto: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Sempre me perguntar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Sempre abrir como projeto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Sempre importar modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Quando você faz alterações em um perfil e troca para um diferent, um diálogo aparecerá perguntando se você quer manter ou aplicar suas modificações, ou você pode forçar um comportamento default e não ter o diálogo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportamento default para valores de configuração alterados ao mudar para um perfil diferente: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Sempre descartar alterações da configuração"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Sempre transferir as alterações para o novo perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacidade"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Dados anônimos sobre sua impressão podem ser enviados para a Ultimaker? Nota: nenhuma informação pessoalmente identificável, modelos ou endereços IP são enviados ou armazenados."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Enviar informação (anônima) de impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Mais informações"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Atualizações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "O Cura deve verificar novas atualizações quando o programa for iniciado?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Verificar atualizações na inicialização"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "Ao procurar por atualizações, somente o fazer para versões estáveis."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Versões estáveis somente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "Ao procurar por atualizações, fazer para versões estáveis ou beta."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "Versões estáveis ou beta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Uma verificação automática por novos complementos deve ser feita toda vez que o Cura iniciar? É altamente recomendado que não desabilite esta opção!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Ter notificações para atualizações de complementos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informação"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Adicionar impressora por endereço IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Confirmar Mudança de Diâmetro"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Entre o endereço IP de sua impressora."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "O novo diâmetro de filamento está ajustado em %1 mm, que não é compatível com o extrusor atual. Você deseja continuar?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Adicionar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Exibir Nome"
+msgid "Could not connect to device."
+msgstr "Não foi possível conectar ao dispositivo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Tipo de Material"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Não consegue conectar à sua impressora Ultimaker?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Cor"
+msgid "The printer at this address has not responded yet."
+msgstr "A impressora neste endereço ainda não respondeu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Propriedades"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Esta impressora não pode ser adicionada porque é uma impressora desconhecida ou porque não é o host do grupo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densidade"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Conectar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Diâmetro"
+msgid "Release Notes"
+msgstr "Notas de lançamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Custo do Filamento"
+msgid "User Agreement"
+msgstr "Contrato de Usuário"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Peso do Filamento"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Concordar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Comprimento do Filamento"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Rejeitar e fechar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Custo por Metro"
+msgid "What's New"
+msgstr "O Que Há de Novo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Próximo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Este material está vinculado a %1 e compartilha algumas de suas propriedades."
+msgid "Add a Cloud printer"
+msgstr "Adicionar uma impressora de Nuvem"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Desvincular Material"
+msgid "Waiting for Cloud response"
+msgstr "Aguardando resposta da Nuvem"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Descrição"
+msgid "No printers found in your account?"
+msgstr "Nenhuma impressora encontrada em sua conta?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informação sobre Aderência"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "As seguintes impressoras da sua conta foram adicionadas ao Cura:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Criar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Adicionar impressora manualmente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplicar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Adicionar ajustes de materiais e plugins do Marketplace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Sincronizar com Impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Fazer backup e sincronizar seus ajustes de materiais e plugins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Compartilhe ideias e consiga ajuda de mais de 48.000 usuários da Comunidade Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importar Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Pular"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Não foi possível importar material <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Criar uma conta Ultimaker gratuita"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Material <filename>%1</filename> importado com sucesso"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Bem-vindo ao Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exportar Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr "Por favor siga estes passos para configurar o Ultimaker Cura. Isto tomará apenas alguns momentos."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Falha em exportar material para <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Começar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Material exportado para <filename>%1</filename> com sucesso"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vazio"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Sincronizar materiais com impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Sincronizar materiais com impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor do perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "Seguindo alguns passos simples, você conseguirá sincronizar todos os seus perfis de material com suas impressoras."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nome da impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Iniciar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Por favor dê um nome à sua impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "Por que eu preciso sincronizar perfis de material?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Adicionar uma impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Entrar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Adicionar uma impressora de rede"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Para automaticamente sincronizar os perfis de material com todas as suas impressoras conectadas à Digital Factory, você precisa estar logado pelo Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Adicionar uma impressora local"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Sincronizar materiais usando USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Não foi encontrada nenhuma impressora em sua rede."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "Os seguintes materiais receberão novos perfis de material:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Atualizar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "Algo de errado aconteceu ao enviar os materiais às impressoras."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Adicionar impressora por IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "Perfis de material sincronizados com sucesso com as seguintes impressoras:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Adicionar impressora de nuvem"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Resolução de problemas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "Impressoras faltando?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Nos ajude a melhor o Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Certifique-se de que todas as suas impressoras estejam LIGADAS e conectadas à Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Atualizar Lista"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Tentar novamente"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Feito"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "O Ultimaker Cura coleta dados anônimos para melhor a qualidade de impressão e experiência do usuário, incluindo:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Sincronizar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Tipos de máquina"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "Sincronizando"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Uso do material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "Nenhuma impressora encontrada"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Número de fatias"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Parece que você não tem impressoras compatíveis conectadas à Digital Factory. Certifique-se que sua impressora esteja conectada e rodando o firmware mais recente."
+msgid "Print settings"
+msgstr "Ajustes de impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Aprenda como conectar sua impressora à Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Dados coletados pelo Ultimaker Cura não conterão nenhuma informação pessoal."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Atualizar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Mais informações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Sincronizar perfis de material via USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lista de objetos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Siga os passos seguintes para carregar os perfis de material novos na sua impressora."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "Está impresso como suporte."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Clique no botão de exportar arquivo de material."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "Outros modelos se sobrepondo a esse modelo foram modificados."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "Grava o arquivo .umm em um pendrive USB."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "Preenchimento se sobrepondo a este modelo foi modificado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "Insira o pendrive USB na sua impressora e faça o procedimento de carregar novos perfis de material."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "Sobreposições neste modelo não são suportadas."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Como carregar novos perfis de material na minha impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Sobrepõe %1 ajuste."
+msgstr[1] "Sobrepõe %1 ajustes."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Exportar arquivo de material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Impressoras conectadas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Exportar Todos Os Materiais"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Impressoras pré-ajustadas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Visibilidade dos Ajustes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "A impressora de nuvem está offline. Por favor verifique se a impressora está ligada e conectada à internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Verificar tudo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Esta impressora não está vinculada à sua conta. Por favor visite a Ultimaker Digital Factory para estabelecer uma conexão."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "A conexão de nuvem está indisponível. Por favor se logue para se conectar à impressora de nuvem."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calculado"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "A conexão de nuvem está indisponível. Por favor verifique sua conexão de internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Ajustes"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Adicionar impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Gerenciar impressoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Atual"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unidade"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Sem Título"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Não conectado a nenhuma impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "A impressora não aceita comandos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "Em manutenção. Por favor verifique a impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "A conexão à impressora foi perdida"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Imprimindo..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Pausado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Preparando..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Por favor remova a impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Abortar Impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Tem certeza que deseja abortar a impressão?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Imprimir Modelo Selecionado com %1"
-msgstr[1] "Imprimir Modelos Selecionados com %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "Minhas impressoras"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Monitora as impressoras na Ultimaker Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Cria projetos de impressão na Digital Library."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Trabalhos de impressão"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Monitora trabalhos de impressão e reimprime a partir do histórico."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Estende o Ultimaker Cura com complementos e perfis de material."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Torne-se um especialista em impressão 3D com Ultimaker e-learning."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Suporte Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Alguns ajustes ocultos usam valores diferentes de seu valor calculado normal.\n"
+"\n"
+"Clique para tornar estes ajustes visíveis."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Saiba como começar com o Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Ajustes de busca"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Fazer uma pergunta"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copiar valor para todos os extrusores"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Consultar a Comunidade Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copiar todos os valores alterados para todos os extrusores"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Relatar um problema"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Ocultar este ajuste"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Deixe os desenvolvedores saberem que algo está errado."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Não exibir este ajuste"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Visita o website da Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Manter este ajuste visível"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Controle da Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configurar a visibilidade dos ajustes..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Posição de Trote"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Este ajuste não é usado porque todos os ajustes que ele influencia estão sobrepostos."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Afeta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Afetado Por"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Distância de Trote"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Este ajuste é sempre compartilhado entre todos os extrusores. Modificá-lo aqui mudará o valor para todos."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Enviar G-Code"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Enviar comando G-Code personalizado para a impressora conectada. Pressione 'enter' para enviar o comando."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Este ajuste é resolvido dos valores conflitante específicos de extrusor:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Extrusor"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "A temperatura-alvo do hotend. O hotend vai aquecer ou esfriar na direção desta temperatura. Se for zero, o aquecimento de hotend é desligado."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "A temperatura atual deste hotend."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "A temperatura com a qual pré-aquecer o hotend."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Pré-aquecer"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Aquece o hotend com antecedência antes de imprimir. Você pode continuar ajustando sua impressão enquanto está aquecendo e não terá que esperar que o hotend termine o aquecimento quando estiver pronto para imprimir."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "A cor do material neste extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "O material neste extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "O bico inserido neste extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "A impressora não está conectada."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Este ajuste tem um valor que é diferente do perfil.\n"
+"\n"
+"Clique para restaurar o valor do perfil."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Mesa de Impressão"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "A temperatura-alvo da mesa aquecida. A mesa aquecerá ou resfriará para esta temperatura. Se for zero, o aquecimento é desligado."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "A temperatura atual da mesa aquecida."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "A temperatura em que pré-aquecer a mesa."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Aquecer a mesa antes de imprimir. Você pode continuar ajustando sua impressão enquanto ela está aquecendo, e não terá que esperar o aquecimento quando estiver pronto pra imprimir."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Entrar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Adicione perfis de material e plug-ins do Marketplace\n"
-"- Faça backup e sincronize seus perfis de materiais e plugins\n"
-"- Compartilhe ideias e consiga ajuda de mais de 48.000 usuários da comunidade Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Criar uma conta Ultimaker gratuita"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Última atualização: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Conta na Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Deslogar"
+"Este ajuste é normalmente calculado, mas atualmente tem um conjunto absoluto de valores.\n"
+"\n"
+"Clique para restaurar o valor calculado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Verificando..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Conta sincronizada"
+msgid "Active print"
+msgstr "Impressão ativa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Alguma coisa deu errado..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Instalação aguardando atualizações"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Verificar atualizações da conta"
+msgid "Job Name"
+msgstr "Nome do Trabalho"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Sem Título"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tempo de Impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "Sem itens para selecionar"
+msgid "Estimated time left"
+msgstr "Tempo restante estimado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mostra Guia de Resolução de Problemas Online"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Alternar Tela Cheia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Sair da Tela Cheia"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "Desfazer (&U)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Refazer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "Sair (&Q)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "Visão &3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Visão Frontal"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Visão Superior"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Visão de Baixo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Visão do Lado Esquerdo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Visão do Lado Direito"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Configurar Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Adicionar Impressora..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Adm&inistrar Impressoras..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Administrar Materiais..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Adicionar mais materiais do Mercado"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "At&ualizar perfil com valores e sobreposições atuais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Descartar ajustes atuais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&Criar perfil a partir de ajustes/sobreposições atuais..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Administrar perfis..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Exibir &Documentação Online"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Relatar um &Bug"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Novidades"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Sobre..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Remover Selecionados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Centralizar Selecionados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Multiplicar Selecionados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Remover Modelo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Ce&ntralizar Modelo na Mesa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "A&grupar Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Desagrupar Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "Co&mbinar Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Multiplicar Modelo..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Selecionar Todos Os Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Esvaziar a Mesa de Impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Recarregar Todos Os Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Posicionar Todos os Modelos em Todas as Plataformas de Impressão"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Posicionar Todos os Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Posicionar Seleção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Reestabelecer as Posições de Todos Os Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Remover as Transformações de Todos Os Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "Abrir Arquiv&o(s)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Novo Projeto..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Exibir Pasta de Configuração"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configurar a visibilidade dos ajustes..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Mercado"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Este ajuste não é usado porque todos os ajustes que ele influencia estão sobrepostos."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Afeta"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Afetado Por"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Este ajuste é sempre compartilhado entre todos os extrusores. Modificá-lo aqui mudará o valor para todos."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Este ajuste é resolvido dos valores conflitante específicos de extrusor:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Este ajuste tem um valor que é diferente do perfil.\n"
-"\n"
-"Clique para restaurar o valor do perfil."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Este ajuste é normalmente calculado, mas atualmente tem um conjunto absoluto de valores.\n"
-"\n"
-"Clique para restaurar o valor calculado."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Ajustes de busca"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copiar valor para todos os extrusores"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copiar todos os valores alterados para todos os extrusores"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Ocultar este ajuste"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Não exibir este ajuste"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Manter este ajuste visível"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Alguns ajustes ocultos usam valores diferentes de seu valor calculado normal.\n"
-"\n"
-"Clique para tornar estes ajustes visíveis."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Este pacote será instalado após o reinício."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Ajustes"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Fechando %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Tem certeza que quer sair de %1?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Instalar Pacote"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Visão 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Abrir Arquivo(s)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Viso de Frente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Encontramos um ou mais arquivos de G-Code entre os arquivos que você selecionou. Você só pode abrir um arquivo de G-Code por vez. Se você quiser abrir um arquivo de G-Code, por favor selecione somente um."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Visão de Cima"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Adicionar Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Visão à Esquerda"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Novidades"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Visão à Direita"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Provê Ajustes Por Modelo."
+msgid "Provides a prepare stage in Cura."
+msgstr "Provê um estágio de preparação no Cura."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Ferramenta de Ajustes Por Modelo"
+msgid "Prepare Stage"
+msgstr "Estágio de Preparação"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Provê suporte à importação de perfis do Cura."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Provê suporte à exportação de perfis do Cura."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Leitor de Perfis do Cura"
+msgid "Cura Profile Writer"
+msgstr "Gravador de Perfis do Cura"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Provê suporte à leitura de arquivos X3D."
+msgid "Provides support for reading model files."
+msgstr "Provê suporta a ler arquivos de modelo."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "Leitor de X3D"
+msgid "Trimesh Reader"
+msgstr "Leitor Trimesh"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Permite backup e restauração da configuração."
+msgid "Checks for firmware updates."
+msgstr "Verifica por atualizações de firmware."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Backups Cura"
+msgid "Firmware Update Checker"
+msgstr "Verificador de Atualizações de Firmware"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Provê uma maneira de alterar ajustes de máquina (tais como volume de impressão, tamanho do bico, etc.)."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Registra certos eventos de forma que possam ser usados pelo relator de acidentes"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Ação de Ajustes de Máquina"
+msgid "Sentry Logger"
+msgstr "Sentinela para Registro"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Cria uma malha apagadora para bloquear a impressão de suporte em certos lugares"
+msgid "Provides a monitor stage in Cura."
+msgstr "Provê um estágio de monitor no Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Apagador de Suporte"
+msgid "Monitor Stage"
+msgstr "Estágio de Monitor"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5819,105 +5985,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Complemento de Dispositivo de Escrita Removível"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Provê ações de máquina para atualização do firmware."
+msgid "Provides support for reading AMF files."
+msgstr "Provê suporta à leitura de arquivos AMF."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Atualizador de Firmware"
+msgid "AMF Reader"
+msgstr "Leitor AMF"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Provê suporte a importação de perfis de versões legadas do Cura."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Provê suporte a leitura de Pacotes de Formato Ultimaker (UFP)."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Leitor de Perfis de Cura Legado"
+msgid "UFP Reader"
+msgstr "Leitor UFP"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Provê suporte à leitura de arquivos 3MF."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Conecta-se à Digital Library, permitindo ao Cura abrir arquivos dela e gravar arquivos nela."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Leitor de 3MF"
+msgid "Ultimaker Digital Library"
+msgstr "Digital Library da Ultimaker"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Provê suporte para a escrita de Ultimaker Format Packages (Pacotes de Formato da Ultimaker)."
+msgid "Provides the Per Model Settings."
+msgstr "Provê Ajustes Por Modelo."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "Gerador de UFP"
+msgid "Per Model Settings Tool"
+msgstr "Ferramenta de Ajustes Por Modelo"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Registra certos eventos de forma que possam ser usados pelo relator de acidentes"
+msgid "Provides a machine actions for updating firmware."
+msgstr "Provê ações de máquina para atualização do firmware."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentinela para Registro"
+msgid "Firmware Updater"
+msgstr "Atualizador de Firmware"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Provê suporte a importar perfis de arquivos G-Code."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Administra conexões de rede a impressora Ultimaker conectadas."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Leitor de Perfil de G-Code"
+msgid "Ultimaker Network Connection"
+msgstr "Conexão de Rede Ultimaker"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Provê uma etapa de pré-visualização ao Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Verifica modelos e configurações de impressão por possíveis problema e dá sugestões."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Estágio de Pré-visualização"
+msgid "Model Checker"
+msgstr "Verificador de Modelo"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Provê a visão de Raios-X."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Visão de Raios-X"
+msgid "Simulation View"
+msgstr "Visão Simulada"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Provê a ligação ao backend de fatiamento CuraEngine."
+msgid "Writes g-code to a file."
+msgstr "Escreve em formato G-Code."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine Backend"
+msgid "G-code Writer"
+msgstr "Gerador de G-Code"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Provê suporta à leitura de arquivos AMF."
+msgid "Provides support for writing 3MF files."
+msgstr "Provê suporte à escrita de arquivos 3MF."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Leitor AMF"
+msgid "3MF Writer"
+msgstr "Gerador de 3MF"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -5929,175 +6095,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Leitor de G-Code Comprimido"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Extensão que permite scripts criados por usuários para pós-processamento"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Provê capacidade de ler e escrever perfis de material baseado em XML."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Pós-processamento"
+msgid "Material Profiles"
+msgstr "Perfis de Material"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Provê suporte à exportação de perfis do Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Provê a ligação ao backend de fatiamento CuraEngine."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Gravador de Perfis do Cura"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine Backend"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Aceita G-Code e o envia a uma impressora. O complemento também pode atualizar o firmware."
+msgid "Provides support for reading X3D files."
+msgstr "Provê suporte à leitura de arquivos X3D."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Impressão USB"
+msgid "X3D Reader"
+msgstr "Leitor de X3D"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Provê um estágio de preparação no Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Habilita a geração de geometria imprimível de arquivos de imagem 2D."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Estágio de Preparação"
+msgid "Image Reader"
+msgstr "Leitor de Imagens"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Permite carregar e exibir arquivos G-Code."
+msgid "Provides support for reading 3MF files."
+msgstr "Provê suporte à leitura de arquivos 3MF."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Leitor de G-Code"
+msgid "3MF Reader"
+msgstr "Leitor de 3MF"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Habilita a geração de geometria imprimível de arquivos de imagem 2D."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Provê suporte para a escrita de Ultimaker Format Packages (Pacotes de Formato da Ultimaker)."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Leitor de Imagens"
+msgid "UFP Writer"
+msgstr "Gerador de UFP"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Provê ações de máquina para impressoras da Ultimaker (tais como assistente de nivelamento de mesa, seleção de atualizações, etc.)."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Provê suporte a importação de perfis de versões legadas do Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ações de máquina Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Leitor de Perfis de Cura Legado"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Escreve em formato G-Code comprimido."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Atualiza configurações do Cura 4.3 para o Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Gerador de G-Code Comprimido"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Atualização de Versão de 4.3 para 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Verifica por atualizações de firmware."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Atualiza configurações do Cura 2.1 para o Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Verificador de Atualizações de Firmware"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Atualização de Versão de 2.1 para 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Submete informações de fatiamento anônimas. Pode ser desabilitado nas preferências."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Atualiza configurações do Cura 4.1 para o Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informação de fatiamento"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Atualização de Versão de 4.1 para 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Provê capacidade de ler e escrever perfis de material baseado em XML."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Perfis de Material"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Conecta-se à Digital Library, permitindo ao Cura abrir arquivos dela e gravar arquivos nela."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Atualiza configurações do Cura 4.5 para o Cura 4.6."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Digital Library da Ultimaker"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Atualização de Versão de 4.5 para 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Buscar, gerenciar e instalar novos pacotes do Cura."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Atualiza configuração do Cura 3.3 para o Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Ferramentas"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Atualização de Versão de 3.3 para 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Escreve em formato G-Code."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Atualiza configurações do Cura 4.8 para o Cura 4.9."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Gerador de G-Code"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "Atualização de Versão de 4.8 para 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Provê a Visão Simulada."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Atualiza configuração do Cura 2.7 para o Cura 3.0."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Visão Simulada"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Atualização de Versão de 2.7 para 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Atualiza configurações do Cura 4.5 para o Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Atualiza configurações do Cura 4.4 para o Cura 4.5."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Atualização de Versão de 4.5 para 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Atualização de Versão de 4.4 para 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Atualiza configurações do Cura 2.5 para o Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Atualiza configurações do Cura 3.0 para o Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Atualização de Versão de 2.5 para 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Atualização de Versão 3.0 para 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6109,115 +6275,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "Atualização de Versão de 4.6.0 para 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Atualiza configurações do Cura 4.7 para o Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Atualiza configurações do Cura 2.6 para o Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Atualização de Versão de 4.7 para 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Atualização de Versão de 2.6 para 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Atualiza configurações do Cura 3.4 para o Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Atualiza configurações do Cura 4.2 para o Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Atualização de Versão de 3.4 para 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Atualização de Versão de 4.2 para 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Atualiza configurações do Cura 2.1 para o Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Atualiza configurações do Cura 4.0 para o Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Atualização de Versão de 2.1 para 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Atualização de Versão de 4.0 para 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Atualiza configurações do Cura 3.2 para o Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Atualiza configurações do Cura 4.6.2 para o Cura 4.7."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Atualização de Versão de 3.2 para 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Atualização de Versão de 4.6.2 para 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Atualiza configurações do Cura 4.8 para o Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Atualiza configurações do Cura 4.9 para o Cura 4.10."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "Atualização de Versão de 4.8 para 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "Atualização de Versão de 4.9 para 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Atualiza configurações do Cura 4.6.2 para o Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Atualiza configurações do Cura 2.2 para o Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Atualização de Versão de 4.6.2 para 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Atualização de Versão de 2.2 para 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Atualiza configurações do Cura 4.2 para o Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Atualiza configurações do Cura 3.2 para o Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Atualização de Versão de 4.2 para 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Atualização de Versão de 3.2 para 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Atualiza configurações do Cura 4.3 para o Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Atualiza configurações do Cura 2.5 para o Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Atualização de Versão de 4.3 para 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Atualização de Versão de 2.5 para 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Atualiza configurações do Cura 4.9 para o Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Atualiza configuração do Cura 3.5 para o Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "Atualização de Versão de 4.9 para 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Atualização de Versão de 3.5 para 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Atualiza configuração do Cura 2.7 para o Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Atualiza configurações do Cura 3.4 para o Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Atualização de Versão de 2.7 para 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Atualização de Versão de 3.4 para 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Atualiza configurações do Cura 2.6 para o Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Atualiza configurações do Cura 4.7 para o Cura 4.8."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Atualização de Versão de 2.6 para 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Atualização de Versão de 4.7 para 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6229,105 +6395,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "Atualização de Versão de 4.11 para 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Atualiza configuração do Cura 3.3 para o Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Permite backup e restauração da configuração."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Atualização de Versão de 3.3 para 3.4"
+msgid "Cura Backups"
+msgstr "Backups Cura"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Atualiza configurações do Cura 3.0 para o Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Provê suporte à importação de perfis do Cura."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Atualização de Versão 3.0 para 3.1"
+msgid "Cura Profile Reader"
+msgstr "Leitor de Perfis do Cura"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Atualiza configurações do Cura 4.0 para o Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Submete informações de fatiamento anônimas. Pode ser desabilitado nas preferências."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Atualização de Versão de 4.0 para 4.1"
+msgid "Slice info"
+msgstr "Informação de fatiamento"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Atualiza configurações do Cura 4.4 para o Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Provê suporte a importar perfis de arquivos G-Code."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Atualização de Versão de 4.4 para 4.5"
+msgid "G-code Profile Reader"
+msgstr "Leitor de Perfil de G-Code"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Atualiza configurações do Cura 2.2 para o Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "Escreve em formato G-Code comprimido."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Atualização de Versão de 2.2 para 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Gerador de G-Code Comprimido"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Atualiza configurações do Cura 4.1 para o Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Extensão que permite scripts criados por usuários para pós-processamento"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Atualização de Versão de 4.1 para 4.2"
+msgid "Post Processing"
+msgstr "Pós-processamento"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Atualiza configuração do Cura 3.5 para o Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Cria uma malha apagadora para bloquear a impressão de suporte em certos lugares"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Atualização de Versão de 3.5 para 4.0"
+msgid "Support Eraser"
+msgstr "Apagador de Suporte"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Administra conexões de rede a impressora Ultimaker conectadas."
+msgid "Provides a preview stage in Cura."
+msgstr "Provê uma etapa de pré-visualização ao Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Conexão de Rede Ultimaker"
+msgid "Preview Stage"
+msgstr "Estágio de Pré-visualização"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Provê suporta a ler arquivos de modelo."
+msgid "Provides the X-Ray view."
+msgstr "Provê a visão de Raios-X."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Leitor Trimesh"
+msgid "X-Ray View"
+msgstr "Visão de Raios-X"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Provê suporte a leitura de Pacotes de Formato Ultimaker (UFP)."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Provê ações de máquina para impressoras da Ultimaker (tais como assistente de nivelamento de mesa, seleção de atualizações, etc.)."
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Leitor UFP"
+msgid "Ultimaker machine actions"
+msgstr "Ações de máquina Ultimaker"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6339,35 +6515,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Visão Sólida"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Provê suporte à escrita de arquivos 3MF."
+msgid "Allows loading and displaying G-code files."
+msgstr "Permite carregar e exibir arquivos G-Code."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Gerador de 3MF"
+msgid "G-code Reader"
+msgstr "Leitor de G-Code"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Provê um estágio de monitor no Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Provê uma maneira de alterar ajustes de máquina (tais como volume de impressão, tamanho do bico, etc.)."
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Estágio de Monitor"
+msgid "Machine Settings Action"
+msgstr "Ação de Ajustes de Máquina"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Verifica modelos e configurações de impressão por possíveis problema e dá sugestões."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Aceita G-Code e o envia a uma impressora. O complemento também pode atualizar o firmware."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Verificador de Modelo"
+msgid "USB printing"
+msgstr "Impressão USB"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Sincronizar materiais"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "Você precisa sair e reiniciar {} para que as alterações tenham efeito."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "Sincronizando..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Alterações detectadas de sua conta Ultimaker"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "Você quer sincronizar os pacotes de material e software com sua conta?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Sincronizar"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Recusar e remover da conta"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "{} complementos falharam em baixar"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Acordo de Licença do Complemento"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Converter imagem..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "A largura da mesa de impressão em milímetros."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Mercado"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "Você precisará reiniciar o Cura para que as alterações tenham efeito."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Instalar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Instalado"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Premium"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Ir ao Mercado Web"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Buscar materiais"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Compatibilidade"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Máquina"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Plataforma de Impressão"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Suporte"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Qualidade"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Documento de Dados Técnicos"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Documento de Dados de Segurança"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Diretrizes de Impressão"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Sítio Web"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "<a href='%1'>Entrar</a> na conta é necessário para instalar ou atualizar"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>Comprar rolos de material</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Atualizar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Atualizando"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Atualizado"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Voltar"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Complementos"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Instalado"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Será instalado ao reiniciar"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "<a href='%1'>Entrar</a> na conta é necessário para atualizar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Downgrade"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Desinstalar"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Contribuições da Comunidade"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Complementos da Comunidade"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Materiais Genéricos"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Obtendo pacotes..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Sítio Web"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "Email"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Por favor se logue para adquirir complementos e materiais verificados para o Ultimaker Cura Enterprise"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Versão"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Última atualização"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Downloads"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Complementos instalados"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "Nenhum complemento foi instalado."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Materiais instalados"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "Nenhum material foi instalado."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Complementos empacotados"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Materiais empacotados"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Não foi possível conectar-se à base de dados de Pacotes do Cura. Por favor verifique sua conexão."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "Você precisa aceitar a licença para que o pacote possa ser instalado"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Alterações da sua conta"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Dispensar"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "Os seguintes pacotes serão adicionados:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "Os seguintes pacotes não podem ser instalados por incompatibilidade de versão do Cura:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Confirme a desinstalação"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Você está desinstalando material e/ou perfis que ainda estão em uso. Confirmar irá restaurar os materiais e perfis seguintes a seus defaults."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Materiais"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Perfis"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Confirmar"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Algumas coisas podem ser problemáticas nesta impressão. Clique para ver dicas de correção."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Biblioteca de suporte para manuseamento de objetos planares"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "Você personalizou alguns ajustes de perfil.\n"
+#~ "Gostaria de manter estes ajustes alterados após mudar de perfis?\n"
+#~ "Alternativamente, você pode descartar as alterações para carregar os defaults de '%1'."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "Plataforma de Impressão (&B)"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Criar"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Duplicar"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Impressora: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Atualizar perfil com ajustes/sobreposições atuais"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Tema:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Você precisará reiniciar a aplicação para que essas mudanças tenham efeito."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Mais informações"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Criar"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Sincronizar com Impressoras"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Impressora"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Unidade"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Mostra Guia de Resolução de Problemas Online"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Adicionar mais materiais do Mercado"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Posicionar Todos os Modelos em Todas as Plataformas de Impressão"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Mercado"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Buscar, gerenciar e instalar novos pacotes do Cura."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Ferramentas"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Provê a Visão Simulada."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
@@ -7226,8 +7760,7 @@ msgstr "Verificador de Modelo"
 #~ "\n"
 #~ "Select your printer from the list below:"
 #~ msgstr ""
-#~ "Para imprimir diretamente para sua impressora pela rede, por favor se certifique que a impressora esteja conectada na rede usando um cabo de rede ou conectando sua impressora na rede WIFI. Se você não conectar o Cura à sua impressora, você ainda pode usar uma unidade USB para transferir arquivos G-"
-#~ "Code para sua impressora.\n"
+#~ "Para imprimir diretamente para sua impressora pela rede, por favor se certifique que a impressora esteja conectada na rede usando um cabo de rede ou conectando sua impressora na rede WIFI. Se você não conectar o Cura à sua impressora, você ainda pode usar uma unidade USB para transferir arquivos G-Code para sua impressora.\n"
 #~ "\n"
 #~ "Selecione sua impressora da lista abaixo:"
 
diff --git a/resources/i18n/pt_BR/fdmextruder.def.json.po b/resources/i18n/pt_BR/fdmextruder.def.json.po
index fd346707cf..5b8ac9982e 100644
--- a/resources/i18n/pt_BR/fdmextruder.def.json.po
+++ b/resources/i18n/pt_BR/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-11 17:09+0200\n"
 "Last-Translator: Cláudio Sampaio <patola@gmail.com>\n"
 "Language-Team: Cláudio Sampaio <patola@gmail.com>\n"
diff --git a/resources/i18n/pt_BR/fdmprinter.def.json.po b/resources/i18n/pt_BR/fdmprinter.def.json.po
index ef79c89037..b2ee5d52be 100644
--- a/resources/i18n/pt_BR/fdmprinter.def.json.po
+++ b/resources/i18n/pt_BR/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2022-01-04 05:45+0100\n"
 "Last-Translator: Cláudio Sampaio <patola@gmail.com>\n"
 "Language-Team: Cláudio Sampaio <patola@gmail.com>\n"
@@ -467,8 +467,8 @@ msgstr "Polígono da Cabeça com Ventoinha"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "Silhueta da cabeça de impressão com os suportes de ventoinhas inclusos."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -741,6 +741,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "O diâmetro da engrenagem que traciona o material no alimentador."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Qualidade"
@@ -961,6 +971,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Número de filetes da parede. Quando calculado pela espessura de parede, este valor é arredondado para um inteiro."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Distância de Varredura da Parede Externa"
@@ -991,14 +1051,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Otimiza a ordem em que as paredes são impressas, tais que o número de retrações e a distância percorrida sejam reduzidos. A maioria das peças se beneficiará deste ajuste habilitado mas outras poderão demorar mais, portanto compare as estimativas de tempo de impressão com e sem otimização. A primeira camada não é otimizada quando o brim é selecionado como tipo de aderência da mesa de impressão."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Paredes exteriores antes das interiores"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Imprime as paredes em ordem de fora para dentro quando habilitado. Isto pode ajudar a melhorar a acurácia dimensional e X e Y quando se usa um plástico de alta viscosidade como ABS; no entanto pode também diminuir a qualidade de impressão da superfície externa, especialmente em seções pendentes."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1011,94 +1081,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Imprime uma parede adicional a cada duas camadas. Deste jeito o preenchimento fica aprisionado entre estas paredes extras, resultando em impressões mais fortes."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Compensar Sobreposições de Parede"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Compensa o fluxo para partes de uma parede sendo impressa onde já há outra parede."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Compensar Sobreposições de Parede Externa"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Compensa o fluxo para partes de uma parede externa sendo impressa onde já há outra parede."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Compensar Sobreposições da Parede Interna"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Compensa o fluxo para partes de uma parede interna sendo impressa onde já há outra parede."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Mínimo Fluxo da Parede"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Mínima porcentagem de fluxo permite para um filete de parede. A compensação de sobreposição de parede reduz o fluxo de uma parede quando ela está próxima a outra já impressa. Paredes cujo fluxo seja menor que este valor serão trocadas por um momento de percurso. Ao usar este ajuste, você deve habilitar a compensação de sobreposição de paredes e imprimir as paredes externas antes das internas."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Preferir Retração"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Se usado, a retração é usada ao invés de combing para movimentos de percurso que substituem paredes cujo fluxo estiver abaixo do limite mínimo."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Preenche Lacunas Entre Paredes"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Preenche as lacunas que ficam entre paredes quando paredes intermediárias não caberiam."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Em lugar nenhum"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Imprimir Paredes Finas"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Em todos os lugares"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Imprime partes do modelo que são horizontalmente mais finas que o tamanho do bico."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Filtrar Pequenas Lacunas"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Filtrar (rempver) pequenas lacunas para reduzir bolhas no exterior do modelo."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Imprimir Paredes Finas"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Imprime partes do modelo que são horizontalmente mais finas que o tamanho do bico."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2200,6 +2260,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Para compensar o encolhimento do material enquanto esfria, o modelo será redimensionado por este fator."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Material Cristalino"
@@ -2710,24 +2790,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "As poucas primeiras camadas são impressas mais devagar que o resto do modelo, para conseguir melhor aderência à mesa e melhorar a taxa de sucesso geral das impressão. A velocidade é gradualmente aumentada entre estas camadas."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Equalizar Fluxo de Filamento"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Imprime filetes mais finos que o normal mais rapidamente de modo que a quantidade de material extrudado por segundo se mantenha o mesmo. Partes pequenas em seu modelo podem exigir filetes impressos com largura menor que as providas nos ajustes. Este ajuste controla as mudanças de velocidade para tais filetes."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Velocidade Máxima para Equalização de Fluxo"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Velocidade máxima de impressão no ajuste de velocidades para equalizar o fluxo."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4465,6 +4535,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "O extrusor usado ara imprimir skirt, brim ou raft. Usado em multi-extrusão."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Contagem de linhas de Skirt"
@@ -4629,6 +4739,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "Distância entre as linhas do raft para as camadas superiores. O espaçamento deve ser igual à largura de linha, de modo que a superfície seja sólida."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Espessura do Meio do Raft"
@@ -5129,6 +5249,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "O desvio máximo permitido ao reduzir a resolução para o ajuste de Máxima Resolução. Se você aumentar isto, a impressão será menos precisa, mas o G-Code será menor. O Desvio Máximo é um limite para Resolução Máxima, portanto se os dois conflitarem o Desvio Máximo sempre será o valor dominante."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Modos Especiais"
@@ -6423,6 +6553,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "Aspectos pequenos na primeira camada serão impressos nesta porcentagem de sua velocidade de impressão normal. Impressão mais lenta pode ajudar com aderência e precisão."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Ajustes de Linha de Comando"
@@ -6482,6 +6642,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matriz de transformação a ser aplicada ao modelo após o carregamento do arquivo."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "Silhueta da cabeça de impressão com os suportes de ventoinhas inclusos."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Paredes exteriores antes das interiores"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Imprime as paredes em ordem de fora para dentro quando habilitado. Isto pode ajudar a melhorar a acurácia dimensional e X e Y quando se usa um plástico de alta viscosidade como ABS; no entanto pode também diminuir a qualidade de impressão da superfície externa, especialmente em seções pendentes."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Compensar Sobreposições de Parede"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Compensa o fluxo para partes de uma parede sendo impressa onde já há outra parede."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Compensar Sobreposições de Parede Externa"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Compensa o fluxo para partes de uma parede externa sendo impressa onde já há outra parede."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Compensar Sobreposições da Parede Interna"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Compensa o fluxo para partes de uma parede interna sendo impressa onde já há outra parede."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Mínimo Fluxo da Parede"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Mínima porcentagem de fluxo permite para um filete de parede. A compensação de sobreposição de parede reduz o fluxo de uma parede quando ela está próxima a outra já impressa. Paredes cujo fluxo seja menor que este valor serão trocadas por um momento de percurso. Ao usar este ajuste, você deve habilitar a compensação de sobreposição de paredes e imprimir as paredes externas antes das internas."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Preferir Retração"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Se usado, a retração é usada ao invés de combing para movimentos de percurso que substituem paredes cujo fluxo estiver abaixo do limite mínimo."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Preenche Lacunas Entre Paredes"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Preenche as lacunas que ficam entre paredes quando paredes intermediárias não caberiam."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Em lugar nenhum"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Em todos os lugares"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Filtrar Pequenas Lacunas"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Filtrar (rempver) pequenas lacunas para reduzir bolhas no exterior do modelo."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Equalizar Fluxo de Filamento"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Imprime filetes mais finos que o normal mais rapidamente de modo que a quantidade de material extrudado por segundo se mantenha o mesmo. Partes pequenas em seu modelo podem exigir filetes impressos com largura menor que as providas nos ajustes. Este ajuste controla as mudanças de velocidade para tais filetes."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Velocidade Máxima para Equalização de Fluxo"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Velocidade máxima de impressão no ajuste de velocidades para equalizar o fluxo."
+
 #~ msgctxt "machine_max_feedrate_e label"
 #~ msgid "Maximum Feedrate"
 #~ msgstr "Velocidade Máxima de Alimentação"
diff --git a/resources/i18n/pt_PT/cura.po b/resources/i18n/pt_PT/cura.po
index 3f68d20754..a15a6849c8 100644
--- a/resources/i18n/pt_PT/cura.po
+++ b/resources/i18n/pt_PT/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2021-04-16 14:56+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Portuguese <info@lionbridge.com>, Paulo Miranda <av@utopica3d.com>, Portuguese <info@bothof.nl>\n"
@@ -17,900 +17,80 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.4.1\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Não é possível criar um arquivo a partir do directório de dados do utilizador: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Backup"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Tentou restaurar um Cura backup sem existirem dados ou metadados correctos."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Tentativa de reposição de uma cópia de segurança do Cura que é superior à versão atual."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "O seguinte erro ocorreu ao tentar restaurar uma cópia de segurança do Cura:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Sincronize os perfis de material com as suas impressoras antes de começar a imprimir."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Novos materiais instalados"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Sincronizar materiais"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "Saber mais"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "Não foi possível guardar o arquivo de material em {}:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Erro ao guardar o arquivo de material"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Erro desconhecido."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "A altura do volume de construção foi reduzida devido ao valor da definição \"Sequência de impressão\" para impedir que o pórtico colida com os modelos impressos."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volume de construção"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Tem a certeza de que pretende remover {0}? Esta ação não pode ser anulada!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Manter"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Desconhecido"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Não é possível ligar a(s) impressora(s) abaixo porque faz(em) parte de um grupo"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Impressoras em rede disponíveis"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Preparar"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Perfil Cura"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Perfis personalizados"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-# rever!
-# contexto
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Todos os Formatos Suportados ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Todos os Ficheiros (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Acabamento"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "O perfil de acabamento foi criado para imprimir modelos e protótipos finais com o objetivo de se obter uma elevada qualidade de acabamento da superfície em termos visuais."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "O perfil de engenharia foi criado para imprimir protótipos funcionais e peças finais com o objetivo de se obter uma maior precisão dimensional assim como tolerâncias menores."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Rascunho"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "O perfil de rascunho foi concebido para imprimir protótipos de teste e de validação de conceitos com o objetivo de se obter uma redução significativa do tempo de impressão."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Material Personalizado"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Falha no início de sessão"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "A procurar nova posição para os objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "A Procurar Posição"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Não é possível posicionar todos os objetos dentro do volume de construção"
-
-# rever!
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Não é Possível Posicionar"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Não foi possível criar o ficheiro de materiais para sincronizar com as impressoras."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Não foi possível carregar o ficheiro de materiais para sincronizá-lo com as impressoras."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "A resposta da Digital Factory parece estar corrompida."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "A resposta da Digital Factory tem informações importantes em falta."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Não foi possível estabelecer a ligação com a Digital Factory para poder sincronizar os materiais com algumas das impressoras."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Não foi possível estabelecer a ligação com a Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "A carregar máquinas..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "A configurar as preferências..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "A Inicializar a Máquina Ativa..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "A inicializar o gestor das máquinas..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "A inicializar o volume de construção..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "A configurar cenário..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "A carregar interface..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "A inicializar o motor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Apenas pode ser carregado um ficheiro G-code de cada vez. Importação {0} ignorada"
-
-# rever!
-# contexto!
-# Atenção?
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Aviso"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Não é possível abrir outro ficheiro enquanto o G-code estiver a carregar. Importação {0} ignorada"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Erro"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Ignorar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Fechar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Seguinte"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Concluir"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Adicionar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Grupo #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Parede Exterior"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Paredes Interiores"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Revestimento"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Enchimento"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Enchimento dos Suportes"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Interface dos Suportes"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Suportes"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Contorno"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Torre de preparação"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Deslocação"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Retrações"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Outro"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "Não foi possível abrir as notas sobre a nova versão."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Não é possível iniciar o Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>Ups, o Ultimaker Cura encontrou um possível problema.</p></b>\n"
-"                    <p>Foi encontrado um erro irrecuperável durante o arranque da aplicação. Este pode ter sido causado por alguns ficheiros de configuração incorrectos. Sugerimos que faça um backup e reponha a sua configuração.</p>\n"
-"                    <p>Os backups estão localizados na pasta de configuração.</p>\n"
-"                    <p>Por favor envie-nos este Relatório de Falhas para podermos resolver o problema.</p>\n"
-"                "
-
-# rever!
-# button size?
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Enviar relatório de falhas para a Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Mostrar relatório de falhas detalhado"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Mostrar pasta de configuração"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Backup e Repor a Configuração"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Relatório de Falhas"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Ocorreu um erro fatal no Cura. Por favor envie-nos este Relatório de Falhas para podermos resolver o problema</p></b>\n"
-"            <p>Por favor utilize o botão \"Enviar relatório\" para publicar um relatório de erros automaticamente nos nossos servidores</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Informações do sistema"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Desconhecido"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Versão do Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Idioma do Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "Idioma do Sistema Operativo"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Plataforma"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Versão Qt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "Versão PyQt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Ainda não inicializado<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>Versão do OpenGL: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>Vendedor do OpenGL: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>Processador do OpenGL: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Determinação da origem do erro"
-
-# rever!
-# Registos?
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Relatórios"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Enviar relatório"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Não é possível iniciar um novo processo de início de sessão. Verifique se ainda está ativa outra tentativa de início de sessão."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Não é possível aceder ao servidor da conta Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "O Log-in falhou"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "O estado apresentado não está correto."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Foi excedido o tempo limite de autenticação com o servidor."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Forneça as permissões necessárias ao autorizar esta aplicação."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Ocorreu algo inesperado ao tentar iniciar sessão, tente novamente."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Não foi possível ler a resposta."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Multiplicar e posicionar objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "A posicionar objetos"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "A Posicionar Objeto"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Não suportado"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Nozzle"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "As definições foram alteradas de forma a corresponder aos extrusores disponíveis de momento:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Definições atualizadas"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extrusor(es) desativado(s)"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "O Ficheiro Já Existe"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "O ficheiro <filename>{0}</filename> já existe. Tem a certeza de que deseja substituí-lo?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "URL de ficheiro inválido:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Falha ao exportar perfil para <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Falha ao exportar perfil para <filename>{0}</filename>: O plug-in de gravação comunicou uma falha."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Perfil exportado para <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Exportação bem-sucedida"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Falha ao importar perfil de <filename>{0}</filename>: {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Não é possível importar o perfil de <filename>{0}</filename> antes de ser adicionada uma impressora."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Nenhum perfil personalizado para importar no ficheiro <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Falha ao importar perfil de <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "O perfil <filename>{0}</filename> contém dados incorretos, não foi possível importá-lo."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Falha ao importar perfil de <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "Perfil {0} importado com êxito."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "O ficheiro {0} não contém qualquer perfil válido."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "O perfil {0} é de um formato de ficheiro desconhecido ou está corrompido."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Perfil personalizado"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "O perfil não inclui qualquer tipo de qualidade."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Ainda não existe qualquer impressora ativa."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "Não é possível adicionar o perfil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "O tipo de qualidade '{0}' não é compatível com a definição de máquina atualmente ativa '{1}'."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Aviso: o perfil não é visível porque o respetivo tipo de qualidade '{0}' não está disponível para a configuração atual. Mude para uma combinação de material/bocal que possa utilizar este tipo de qualidade."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Definições Por-Modelo"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configurar definições individuais Por-Modelo"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Perfil Cura"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Ficheiro X3D"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Ocorreu um erro ao tentar restaurar a sua cópia de segurança."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Cópias de segurança"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Ocorreu um erro ao carregar a sua cópia de segurança."
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "A criar a cópia de segurança..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Ocorreu um erro ao criar a cópia de segurança."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Não foi possível aceder às informações de atualização."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "A carregar a sua cópia de segurança..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Poderão estar disponíveis novas funcionalidades ou correções de erros para a sua {machine_name}! Se ainda não tiver a versão mais recente, recomendamos que atualize o firmware da sua impressora para a versão {latest_version}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "A cópia de segurança terminou o seu carregamento."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "A nova versão de firmware %s estável está disponível"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "A cópia de segurança excede o tamanho de ficheiro máximo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Como atualizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Gerir cópias de segurança"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Definições da Máquina"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Remover Suportes"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Criar um volume dentro do qual não são impressos suportes."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Disco Externo"
+msgid "Monitor"
+msgstr "Monitorizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Guardar no Disco Externo"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
@@ -918,618 +98,200 @@ msgstr "Guardar no Disco Externo {0}"
 
 # rever!
 # contexto
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Não existem quaisquer formatos disponíveis para gravar o ficheiro!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "A Guardar no Disco Externo <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "A Guardar"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Não foi possível guardar em <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Não foi possível encontrar um nome do ficheiro ao tentar gravar em {device}."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Não foi possível guardar no Disco Externo {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Erro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Guardado no Disco Externo {0} como {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Ficheiro Guardado"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Ejetar"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Ejetar Disco Externo {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0} foi ejetado. O Disco já pode ser removido de forma segura."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Remover Hardware de forma segura"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Não foi possível ejectar {0}. Outro programa pode estar a usar o disco."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Atualizar firmware"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Perfis Cura 15.04"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "O ficheiro de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não é possível importar a máquina. Em vez disso, serão importados os modelos."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Abrir ficheiro de projeto"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "O projeto de ficheiro <filename>{0}</filename> ficou subitamente inacessível: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Não é possível abrir o ficheiro de projeto"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "O ficheiro de projeto <filename>{0}</filename> está corrompido: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "O ficheiro de projeto <filename>{0}</filename> foi criado utilizando perfis que são desconhecidos para esta versão do Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Ficheiro 3MF"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Não é possível escrever no ficheiro UFP:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Arquivo Ultimaker Format"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Ficheiro G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Pré-visualizar"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Vista Raio-X"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "A Processar Camadas"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "Informações"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "O seccionamento falhou com um erro inesperado. Por favor reportar um erro no nosso registo de problemas."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "O seccionamento falhou"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Reportar um erro"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Reportar um erro no registo de problemas do Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Não é possível seccionar com o material atual, uma vez que é incompatível com a impressora ou configuração selecionada."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+# rever!
+# contexto!
+# Atenção?
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Não é possível Seccionar"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Não é possível seccionar com as definições atuais. As seguintes definições apresentam erros: {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Não é possível seccionar devido a algumas definições por modelo. As seguintes definições apresentam erros num ou mais modelos: {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Não é possível seccionar porque a torre de preparação ou a(s) posição(ões) de preparação é(são) inválidas."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Não é possível seccionar porque existem objetos associados ao extrusor %s desativado."
+msgid "Warning"
+msgstr "Aviso"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Reveja as definições e verifique se os seus modelos:\n"
-"- Cabem dentro do volume de construção\n"
-"- Estão atribuídos a uma extrusora ativada\n"
-"- Não estão todos definidos como objetos modificadores"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Disco Externo"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "Ficheiro AMF"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Ficheiro G-code comprimido"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Pós-Processamento"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modificar G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Impressão USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Imprimir por USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Imprimir por USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Ligado via USB"
+msgid "Ultimaker Format Package"
+msgstr "Arquivo Ultimaker Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Existe uma impressão por USB em curso; fechar o Cura irá interromper esta impressão. Tem a certeza?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Existe uma impressão em curso. O Cura não consegue iniciar outra impressão via USB até a impressão anterior ser concluída."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Impressão em curso"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Preparar"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "A analisar G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Detalhes do G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Certifique-se de que este g-code é apropriado para a sua impressora e respetiva configuração, antes de enviar o ficheiro para a impressora. A representação do g-code poderá não ser exata."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Ficheiro G"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Imagem JPG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Imagem JPEG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Imagem PNG"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Imagem BMP"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Imagem GIF"
+msgid "Per Model Settings"
+msgstr "Definições Por-Modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Nivelar base de construção"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configurar definições individuais Por-Modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Selecionar atualizações"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "O GCodeGzWriter não suporta modo de texto."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Não foi possível aceder às informações de atualização."
+msgid "Update Firmware"
+msgstr "Atualizar firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Poderão estar disponíveis novas funcionalidades ou correções de erros para a sua {machine_name}! Se ainda não tiver a versão mais recente, recomendamos que atualize o firmware da sua impressora para a versão {latest_version}."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "A nova versão de firmware %s estável está disponível"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Como atualizar"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "Não foi possível ler o ficheiro de dados de exemplo."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "É necessário reiniciar o {} para que as alterações tenham efeito."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "A sincronizar..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Foram detetadas alterações da sua conta Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Pretende sincronizar o material e os pacotes de software com a sua conta?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Sincronizar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Rejeitar e remover da conta"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Falhou a transferência de {} plug-ins"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Rejeitar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Concordar"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Contrato de licença do plug-in"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "O GCodeWriter não suporta modo sem texto."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Prepare um G-code antes de exportar."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Quando a opção Wire Printing está ativa, o Cura não permite visualizar as camadas de uma forma precisa."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "O Cura detetou perfis de material que ainda não estavam instalados na impressora que aloja o grupo {0}."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Visualização por Camadas"
+msgid "Sending materials to printer"
+msgstr "Enviar materiais para a impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Não consegue visualizar, porque precisa de fazer o seccionamento primeiro."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Está a tentar ligar a {0}, mas esta não é Host de um grupo. Pode visitar a página Web para a configurar como Host do grupo."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Sem camadas para visualizar"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Não mostrar esta mensagem novamente"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Vista Camadas"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Imprimir através da rede"
+msgid "Not a group host"
+msgstr "Não é Host do grupo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Imprimir através da rede"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Configurar grupo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Ligado através da rede"
+msgid "Sending Print Job"
+msgstr "A enviar trabalho de impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "amanhã"
+msgid "Uploading print job to printer."
+msgstr "Carregar um trabalho de impressão na impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "hoje"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "A fila de trabalhos de impressão está cheia. A impressora não consegue aceitar um novo trabalho."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Ligar Através da Rede"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "Fila cheia"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Aguarde até o trabalho atual ter sido enviado."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Erro de impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "O trabalho de impressão foi enviado com sucesso para a impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Dados Enviados"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Está a tentar ligar a uma impressora que não tem o Ultimaker Connect. Atualize a impressora para o firmware mais recente."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Atualizar a impressora"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "A fila de trabalhos de impressão está cheia. A impressora não consegue aceitar um novo trabalho."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "Fila cheia"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "A enviar trabalho de impressão"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Carregar um trabalho de impressão na impressora."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "O Cura detetou perfis de material que ainda não estavam instalados na impressora que aloja o grupo {0}."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Enviar materiais para a impressora"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Não foi possível carregar os dados para a impressora."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Erro de rede"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Está a tentar ligar a {0}, mas esta não é Host de um grupo. Pode visitar a página Web para a configurar como Host do grupo."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Não é Host do grupo"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Configurar grupo"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1539,66 +301,85 @@ msgstr ""
 "A sua impressora <b>{printer_name}</b> pode ser ligada através da cloud.\n"
 " Faça a gestão da sua fila de impressão e monitorize as suas impressões a partir de qualquer local ao ligar a sua impressora ao Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "Está preparado para a impressão na cloud?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Iniciar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "Saber mais"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Imprimir através da cloud"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Está a tentar ligar a uma impressora que não tem o Ultimaker Connect. Atualize a impressora para o firmware mais recente."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Atualizar a impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Não foi possível carregar os dados para a impressora."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Erro de rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Imprimir através da rede"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Imprimir através da cloud"
+msgid "Print over network"
+msgstr "Imprimir através da rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Ligada através da cloud"
+msgid "Connected over the network"
+msgstr "Ligado através da rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Monitorizar a impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "amanhã"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Controle a impressão no Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "hoje"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Código de erro desconhecido ao carregar trabalho de impressão: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Ligar Através da Rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nova impressora detetada a partir da sua conta Ultimaker"
 msgstr[1] "Novas impressoras detetadas a partir da sua conta Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Adicionar impressora {name} ({model}) a partir da sua conta"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1606,71 +387,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... e {0} outra"
 msgstr[1] "... e {0} outras"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Impressoras adicionadas a partir da Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Não existe uma conectividade de cloud disponível para a impressora"
 msgstr[1] "Não existe uma conectividade de cloud disponível para algumas impressoras"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Esta impressora não está associada à Digital Factory:"
 msgstr[1] "Estas impressoras não estão associadas à Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Para estabelecer uma ligação, visite {website_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Manter configurações da impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Remover impressoras"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "A impressora {printer_name} vai ser removida até à próxima sincronização de conta."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Para remover a impressora {printer_name} de forma permanente, visite {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Tem a certeza de que pretende remover a impressora {printer_name} temporariamente?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Remover impressoras?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1686,2094 +467,3154 @@ msgstr[1] ""
 "Está prestes a remover {0} impressoras do Cura. Esta ação não pode ser anulada.\n"
 "Tem a certeza de que pretende continuar?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr "Está prestes a remover todas as impressoras do Cura. Esta ação não pode ser anulada.Tem a certeza de que pretende continuar?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Imprimir através da cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Imprimir através da cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Ligada através da cloud"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Monitorizar a impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Controle a impressão no Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Código de erro desconhecido ao carregar trabalho de impressão: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Assistente de Modelos 3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+# rever!
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "As áreas destacadas indicam superfícies em falta ou separadas. Corrija o modelo e volte a abri-lo no Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Um, ou mais, dos modelos 3D podem ter menos qualidade de impressão devido à dimensão do modelo 3D e definição de material:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Descubra como assegurar a melhor qualidade e fiabilidade possível da impressão.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver o guia de qualidade da impressão</a></p>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Quando a opção Wire Printing está ativa, o Cura não permite visualizar as camadas de uma forma precisa."
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Erros no modelo"
+msgid "Simulation View"
+msgstr "Visualização por Camadas"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Vista Sólidos"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Não consegue visualizar, porque precisa de fazer o seccionamento primeiro."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Sem camadas para visualizar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Não mostrar esta mensagem novamente"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Vista Camadas"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "O GCodeWriter não suporta modo sem texto."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Prepare um G-code antes de exportar."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Ficheiro G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Erro ao gravar ficheiro 3mf."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "O plug-in Gravador 3MF está danificado."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Ainda não existe um espaço de trabalho para gravar. Por favor, primeiro adicione uma impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Não tem permissão para escrever o espaço de trabalho aqui."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "O sistema operativo não permite guardar um ficheiro de projeto nesta localização ou com este nome de ficheiro."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "Ficheiro 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Ficheiro 3MF de Projeto Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitorizar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Ficheiro G-code comprimido"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "O seccionamento falhou com um erro inesperado. Por favor reportar um erro no nosso registo de problemas."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "O seccionamento falhou"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Reportar um erro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Reportar um erro no registo de problemas do Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Não é possível seccionar com o material atual, uma vez que é incompatível com a impressora ou configuração selecionada."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Assistente de Modelos 3D"
+msgid "Unable to slice"
+msgstr "Não é possível Seccionar"
 
-# rever!
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Não é possível seccionar com as definições atuais. As seguintes definições apresentam erros: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Não é possível seccionar devido a algumas definições por modelo. As seguintes definições apresentam erros num ou mais modelos: {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Não é possível seccionar porque a torre de preparação ou a(s) posição(ões) de preparação é(são) inválidas."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Não é possível seccionar porque existem objetos associados ao extrusor %s desativado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>Um, ou mais, dos modelos 3D podem ter menos qualidade de impressão devido à dimensão do modelo 3D e definição de material:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Descubra como assegurar a melhor qualidade e fiabilidade possível da impressão.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver o guia de qualidade da impressão</a></p>"
+"Reveja as definições e verifique se os seus modelos:\n"
+"- Cabem dentro do volume de construção\n"
+"- Estão atribuídos a uma extrusora ativada\n"
+"- Não estão todos definidos como objetos modificadores"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Tipo de Objecto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "A Processar Camadas"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Modelo normal"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informações"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Imprimir como suporte"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Ficheiro X3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Modificar definições para sobreposições"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Imagem JPG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Não suportar sobreposições"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Imagem JPEG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Apenas objeto de enchimento"
+msgid "PNG Image"
+msgstr "Imagem PNG"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Malha de corte"
+msgid "BMP Image"
+msgstr "Imagem BMP"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Selecionar definições"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Imagem GIF"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Selecionar definições a personalizar para este modelo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Nozzle"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtrar..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "O ficheiro de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não é possível importar a máquina. Em vez disso, serão importados os modelos."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Mostrar tudo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Abrir ficheiro de projeto"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cópias de segurança do Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "O projeto de ficheiro <filename>{0}</filename> ficou subitamente inacessível: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Versão do Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Não é possível abrir o ficheiro de projeto"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Máquinas"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "O ficheiro de projeto <filename>{0}</filename> está corrompido: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiais"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "O ficheiro de projeto <filename>{0}</filename> foi criado utilizando perfis que são desconhecidos para esta versão do Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Perfis"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Recomendado"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plug-ins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Deseja mais?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "Ficheiro 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Efetuar cópia de segurança agora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Não é possível escrever no ficheiro UFP:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Efetuar cópia de segurança automaticamente"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Perfis Cura 15.04"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Criar automaticamente uma cópia de segurança sempre que o Cura é iniciado."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Cópias de segurança"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Restaurar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Ocorreu um erro ao carregar a sua cópia de segurança."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Eliminar cópia de segurança"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "A criar a cópia de segurança..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Tem a certeza de que pretende eliminar esta cópia de segurança? Esta ação não pode ser anulada."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Ocorreu um erro ao criar a cópia de segurança."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Restaurar cópia de segurança"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "A carregar a sua cópia de segurança..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "É necessário reiniciar o Cura para restaurar a sua cópia de segurança. Pretende fechar o Cura agora?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "A cópia de segurança terminou o seu carregamento."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Efetue a cópia de segurança e sincronize as suas definições do Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "A cópia de segurança excede o tamanho de ficheiro máximo."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Iniciar sessão"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Gerir cópias de segurança"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "As minhas cópias de segurança"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Backup"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Atualmente não existem quaisquer cópias de segurança. Utilize o botão \"Efetuar cópia de segurança agora\" para criar uma."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Ocorreu um erro ao tentar restaurar a sua cópia de segurança."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Durante a fase de pré-visualização, terá um limite de 5 cópias de segurança visíveis. Remova uma cópia de segurança para ver as antigas."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "Não foi possível ler o ficheiro de dados de exemplo."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Definições da impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "O GCodeGzWriter não suporta modo de texto."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Largura)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Pós-Processamento"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modificar G-Code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Profundidade)"
+msgid "Support Blocker"
+msgstr "Remover Suportes"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Altura)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Criar um volume dentro do qual não são impressos suportes."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forma da base de construção"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Pré-visualizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origem no centro"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Vista Raio-X"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Base aquecida"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Nivelar base de construção"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volume de construção aquecido"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Selecionar atualizações"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Variante do G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Definições da cabeça de impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X mín"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y mín"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X máx"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y máx"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Altura do pórtico"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Número de Extrusores"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Aplicar desvios da extrusora ao GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "As áreas destacadas indicam superfícies em falta ou separadas. Corrija o modelo e volte a abri-lo no Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-code inicial"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Erros no modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-code final"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "Saber mais"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Definições do nozzle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Vista Sólidos"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Tamanho do nozzle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "A analisar G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diâmetro do material compatível"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Detalhes do G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Desvio X do Nozzle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Certifique-se de que este g-code é apropriado para a sua impressora e respetiva configuração, antes de enviar o ficheiro para a impressora. A representação do g-code poderá não ser exata."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Desvio Y do Nozzle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Ficheiro G"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Número de ventoinha de arrefecimento"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Definições da Máquina"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "G-code inicial do extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Impressão USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "G-code final do extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Imprimir por USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Imprimir por USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Atualizar firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Ligado via USB"
 
-# rever!
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "O firmware é o software que é executado diretamente na sua impressora 3D. Este firmware controla os motores de passo, regula a temperatura e basicamente assegura o funcionamento da sua impressora."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Existe uma impressão por USB em curso; fechar o Cura irá interromper esta impressão. Tem a certeza?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Existe uma impressão em curso. O Cura não consegue iniciar outra impressão via USB até a impressão anterior ser concluída."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Impressão em curso"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "A carregar máquinas..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "A configurar as preferências..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "A Inicializar a Máquina Ativa..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "A inicializar o gestor das máquinas..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "A inicializar o volume de construção..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "A configurar cenário..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "A carregar interface..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "A inicializar o motor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Apenas pode ser carregado um ficheiro G-code de cada vez. Importação {0} ignorada"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Não é possível abrir outro ficheiro enquanto o G-code estiver a carregar. Importação {0} ignorada"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "O firmware que é expedido com as novas impressoras funciona corretamente, mas as novas versões costumam ter mais funcionalidades e melhorias."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Atualizar firmware automaticamente"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Acabamento"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Carregar firmware personalizado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "O perfil de acabamento foi criado para imprimir modelos e protótipos finais com o objetivo de se obter uma elevada qualidade de acabamento da superfície em termos visuais."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "O firmware não pode ser atualizado por não existir ligação com a impressora."
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "O perfil de engenharia foi criado para imprimir protótipos funcionais e peças finais com o objetivo de se obter uma maior precisão dimensional assim como tolerâncias menores."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "O firmware não pode ser atualizado porque a ligação com a impressora não suporta a atualização de firmware."
+msgid "Draft"
+msgstr "Rascunho"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Selecionar firmware personalizado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "O perfil de rascunho foi concebido para imprimir protótipos de teste e de validação de conceitos com o objetivo de se obter uma redução significativa do tempo de impressão."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Atualização de firmware"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Manter"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Tem a certeza de que pretende remover {0}? Esta ação não pode ser anulada!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "A atualizar firmware."
+msgid "Unknown"
+msgstr "Desconhecido"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Atualização de firmware concluída."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Não é possível ligar a(s) impressora(s) abaixo porque faz(em) parte de um grupo"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "A atualização de firmware falhou devido a um erro desconhecido."
+msgid "Available networked printers"
+msgstr "Impressoras em rede disponíveis"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calculado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Sincronize os perfis de material com as suas impressoras antes de começar a imprimir."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Novos materiais instalados"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "A atualização de firmware falhou devido a um erro de comunicação."
+msgid "Custom Material"
+msgstr "Material Personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "A atualização de firmware falhou devido a um erro de entrada/saída."
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "A atualização de firmware falhou devido à ausência de firmware."
+msgid "Custom profiles"
+msgstr "Perfis personalizados"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Abrir Projeto"
+# rever!
+# contexto
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Todos os Formatos Suportados ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Atualizar existente"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Todos os Ficheiros (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Criar nova"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Não foi possível criar o ficheiro de materiais para sincronizar com as impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Resumo – Projeto Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Não foi possível carregar o ficheiro de materiais para sincronizá-lo com as impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Definições da impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "A resposta da Digital Factory parece estar corrompida."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Como deve ser resolvido o conflito da máquina?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "A resposta da Digital Factory tem informações importantes em falta."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tipo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Não foi possível estabelecer a ligação com a Digital Factory para poder sincronizar os materiais com algumas das impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Grupo da Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Não foi possível estabelecer a ligação com a Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Definições do perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Não é possível criar um arquivo a partir do directório de dados do utilizador: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Como deve ser resolvido o conflito no perfil?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Tentou restaurar um Cura backup sem existirem dados ou metadados correctos."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nome"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Tentativa de reposição de uma cópia de segurança do Cura que é superior à versão atual."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "O seguinte erro ocorreu ao tentar restaurar uma cópia de segurança do Cura:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Inexistente no perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "A procurar nova posição para os objetos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "A Procurar Posição"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Não é possível posicionar todos os objetos dentro do volume de construção"
 
 # rever!
-# contexto?!
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 substituição"
-msgstr[1] "%1 substituições"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Não é Possível Posicionar"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivado de"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Falha no início de sessão"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 substituição"
-msgstr[1] "%1, %2 substituições"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Parede Exterior"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Definições de material"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Paredes Interiores"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Como deve ser resolvido o conflito no material?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Revestimento"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Visibilidade das definições"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Enchimento"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modo"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Enchimento dos Suportes"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Definições visíveis:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Interface dos Suportes"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 de %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Suportes"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Abrir um projeto irá apagar todos os modelos na base de construção."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Contorno"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Abrir"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Torre de preparação"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Plug-in de pós-processamento"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Deslocação"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Scripts de pós-processamento"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Retrações"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Adicionar um script"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Outro"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Definições"
+msgid "Group #{group_nr}"
+msgstr "Grupo #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Altere os scripts de pós-processamento."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "Não foi possível abrir as notas sobre a nova versão."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "O script a seguir está ativo:"
-msgstr[1] "Os seguintes scripts estão ativos:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Ignorar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Converter imagem..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Fechar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "A distância máxima de cada pixel desde a \"Base\""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Adicionar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Altura (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Concluir"
 
-# rever!
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "A altura da \"Base\" desde a base de construção em milímetros."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Cancelar"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Seguinte"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "A largura em milímetros na base de construção."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "A altura do volume de construção foi reduzida devido ao valor da definição \"Sequência de impressão\" para impedir que o pórtico colida com os modelos impressos."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Largura (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Volume de construção"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "A profundidade em milímetros na base de construção"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "Não foi possível guardar o arquivo de material em {}:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profundidade (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Erro ao guardar o arquivo de material"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Para litofanias, os pixels escuros devem corresponder a localizações mais espessas para bloquear mais a passagem da luz. Para mapas de altura, os pixels mais claros significam um terreno mais alto, por isso, os pixels mais claros devem corresponder a localizações mais espessas no modelo 3D gerado."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Erro desconhecido."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Mais escuro é mais alto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "O Ficheiro Já Existe"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Mais claro é mais alto"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "O ficheiro <filename>{0}</filename> já existe. Tem a certeza de que deseja substituí-lo?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Está disponível um modelo logarítmico simples para definir a translucidez das litofanias. Para mapas de altura, os valores dos pixels correspondem de forma linear à elevação."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "URL de ficheiro inválido:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Linear"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Não suportado"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Translucidez"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "A percentagem de luz que penetra numa impressão com uma espessura de 1 milímetro. Diminuir este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "As definições foram alteradas de forma a corresponder aos extrusores disponíveis de momento:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "(%) transmitância de 1 mm"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Definições atualizadas"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "A quantidade de suavização a aplicar à imagem."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extrusor(es) desativado(s)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Suavização"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Falha ao exportar perfil para <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Falha ao exportar perfil para <filename>{0}</filename>: O plug-in de gravação comunicou uma falha."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Selecione quaisquer atualizações realizadas a esta Ultimaker Original"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Perfil exportado para <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Base de Construção Aquecida (kit oficial ou de construção própria)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Exportação bem-sucedida"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivelamento da Base de Construção"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Falha ao importar perfil de <filename>{0}</filename>: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Para assegurar uma boa qualidade das suas impressões, pode agora ajustar a base de construção. Quando clica em \"Avançar para a posição seguinte\", o nozzle irá deslocar-se para as diferentes posições que podem ser ajustadas."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Não é possível importar o perfil de <filename>{0}</filename> antes de ser adicionada uma impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Para cada posição, introduza um pedaço de papel debaixo do nozzle e ajuste a altura da base de construção. A altura da base de construção está correta quando o papel fica ligeiramente preso pelo nozzle."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Nenhum perfil personalizado para importar no ficheiro <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Iniciar Nivelamento da base de construção"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Falha ao importar perfil de <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Avançar para Posição Seguinte"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "O perfil <filename>{0}</filename> contém dados incorretos, não foi possível importá-lo."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Mais informações sobre a recolha anónima de dados"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Falha ao importar perfil de <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador. Segue-se um exemplo de todos os dados partilhados:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "Perfil {0} importado com êxito."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Não pretendo enviar dados anónimos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "O ficheiro {0} não contém qualquer perfil válido."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Permitir o envio de dados anónimos"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "O perfil {0} é de um formato de ficheiro desconhecido ou está corrompido."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Mercado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Perfil personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "É necessário reiniciar o Cura para que as alterações dos pacotes sejam aplicadas."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "O perfil não inclui qualquer tipo de qualidade."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Sair %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Ainda não existe qualquer impressora ativa."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Instalar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "Não é possível adicionar o perfil."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Instalado"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "O tipo de qualidade '{0}' não é compatível com a definição de máquina atualmente ativa '{1}'."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Aviso: o perfil não é visível porque o respetivo tipo de qualidade '{0}' não está disponível para a configuração atual. Mude para uma combinação de material/bocal que possa utilizar este tipo de qualidade."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Ir para Mercado na Web"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Multiplicar e posicionar objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Procurar materiais"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "A posicionar objetos"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilidade"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "A Posicionar Objeto"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Máquina"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Não é possível iniciar um novo processo de início de sessão. Verifique se ainda está ativa outra tentativa de início de sessão."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Base de construção"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Não é possível aceder ao servidor da conta Ultimaker."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Suportes"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "O Log-in falhou"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualidade"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Não foi possível ler a resposta."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Ficha técnica"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "O estado apresentado não está correto."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Ficha de segurança"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Foi excedido o tempo limite de autenticação com o servidor."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Instruções de impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Forneça as permissões necessárias ao autorizar esta aplicação."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Site"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Ocorreu algo inesperado ao tentar iniciar sessão, tente novamente."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "É necessário <a href='%1'>Log in</a> para instalar ou atualizar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Não é possível iniciar o Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Comprar bobinas de material</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Ups, o Ultimaker Cura encontrou um possível problema.</p></b>\n"
+"                    <p>Foi encontrado um erro irrecuperável durante o arranque da aplicação. Este pode ter sido causado por alguns ficheiros de configuração incorrectos. Sugerimos que faça um backup e reponha a sua configuração.</p>\n"
+"                    <p>Os backups estão localizados na pasta de configuração.</p>\n"
+"                    <p>Por favor envie-nos este Relatório de Falhas para podermos resolver o problema.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+# rever!
+# button size?
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Atualizar"
+msgid "Send crash report to Ultimaker"
+msgstr "Enviar relatório de falhas para a Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "A Actualizar"
+msgid "Show detailed crash report"
+msgstr "Mostrar relatório de falhas detalhado"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Atualizado"
+msgid "Show configuration folder"
+msgstr "Mostrar pasta de configuração"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Anterior"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plug-ins"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiais"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Instalado"
+msgid "Backup and Reset Configuration"
+msgstr "Backup e Repor a Configuração"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Será instalado após reiniciar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Relatório de Falhas"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "É necessário <a href='%1'>Log in</a> para atualizar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Ocorreu um erro fatal no Cura. Por favor envie-nos este Relatório de Falhas para podermos resolver o problema</p></b>\n"
+"            <p>Por favor utilize o botão \"Enviar relatório\" para publicar um relatório de erros automaticamente nos nossos servidores</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Repor Versão Anterior"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Informações do sistema"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Desinstalar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Desconhecido"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contribuições comunitárias"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Versão do Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Plug-ins comunitários"
+msgid "Cura language"
+msgstr "Idioma do Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiais genéricos"
+msgid "OS language"
+msgstr "Idioma do Sistema Operativo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "A obter pacotes..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Plataforma"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Site"
+msgid "Qt version"
+msgstr "Versão Qt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "PyQt version"
+msgstr "Versão PyQt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Inicie sessão para obter plug-ins e materiais verificados para o Ultimaker Cura Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Versão"
+msgid "Not yet initialized<br/>"
+msgstr "Ainda não inicializado<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Actualizado em"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>Versão do OpenGL: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marca"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>Vendedor do OpenGL: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Transferências"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>Processador do OpenGL: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Plug-ins instalados"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Determinação da origem do erro"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Não foi instalado qualquer plug-in."
+# rever!
+# Registos?
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Relatórios"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Materiais instalados"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Enviar relatório"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Não foi instalado qualquer material."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Certifique-se de que é possível estabelecer ligação com a impressora:\n"
+"- Verifique se a impressora está ligada.\n"
+"- Verifique se a impressora está ligada à rede.\n"
+"- Verifique se tem sessão iniciada para encontrar impressoras ligadas através da cloud."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Plug-ins em pacote"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Ligue a impressora à sua rede."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Materiais em pacote"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Ver manuais do utilizador online"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Não foi possível aceder á base de dados de Pacotes do Cura. Por favor verifique a sua ligação."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Para monitorizar a sua impressão a partir do Cura, ligue a impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "É necessário aceitar a licença para instalar o pacote"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Selecionar definições a personalizar para este modelo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Alterações feitas desde a sua conta"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtrar..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Descartar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Mostrar tudo"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Seguinte"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Tipo de Objecto"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Os seguintes pacotes vão ser instalados:"
+msgid "Normal model"
+msgstr "Modelo normal"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Os seguintes pacotes não podem ser instalados devido a uma versão incompatível do Cura:"
+msgid "Print as support"
+msgstr "Imprimir como suporte"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Confirmar desinstalação"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Modificar definições para sobreposições"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Está a desinstalar materiais e/ou perfis que ainda estão a ser utilizados. Mediante confirmação, as predefinições dos seguintes materiais/perfis serão repostas."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "Não suportar sobreposições"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiais"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Apenas objeto de enchimento"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Perfis"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Malha de corte"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Confirmar"
+msgid "Select settings"
+msgstr "Selecionar definições"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Atualizar firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+# rever!
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Esquema de cores"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "O firmware é o software que é executado diretamente na sua impressora 3D. Este firmware controla os motores de passo, regula a temperatura e basicamente assegura o funcionamento da sua impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Cor do Material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "O firmware que é expedido com as novas impressoras funciona corretamente, mas as novas versões costumam ter mais funcionalidades e melhorias."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Tipo de Linha"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Atualizar firmware automaticamente"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Velocidade"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Carregar firmware personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Espessura da Camada"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "O firmware não pode ser atualizado por não existir ligação com a impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Diâmetro da Linha"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "O firmware não pode ser atualizado porque a ligação com a impressora não suporta a atualização de firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Fluxo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Selecionar firmware personalizado"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Modo Compatibilidade"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Atualização de firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Deslocações"
+msgid "Updating firmware."
+msgstr "A atualizar firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Auxiliares"
+msgid "Firmware update completed."
+msgstr "Atualização de firmware concluída."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Invólucro"
+msgid "Firmware update failed due to an unknown error."
+msgstr "A atualização de firmware falhou devido a um erro desconhecido."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Enchimento"
+msgid "Firmware update failed due to an communication error."
+msgstr "A atualização de firmware falhou devido a um erro de comunicação."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "A Iniciar"
+msgid "Firmware update failed due to an input/output error."
+msgstr "A atualização de firmware falhou devido a um erro de entrada/saída."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Só Camadas Superiores"
+msgid "Firmware update failed due to missing firmware."
+msgstr "A atualização de firmware falhou devido à ausência de firmware."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "5 Camadas Superiores Detalhadas"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Cancelado"
 
-# rever!
-# todas as strings com a frase
-# Topo / Base ??
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Superior / Inferior"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Impressão terminada"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Parede Interior"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "A preparar..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "mín"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "A cancelar..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "máx"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Falhou"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "A colocar em pausa..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Em Pausa"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "A recomeçar..."
+
+# rever!
+# ver contexto!
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Ação necessária"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Termina %1 a %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Gerir impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Vidro"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Atualize o firmware da impressora para gerir a fila remotamente."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Não é possível visualizar os feeds das câmaras das impressoras na cloud a partir do Ultimaker Cura. Clique em \"Gerir impressora\" para visitar o Ultimaker Digital Factory e ver esta câmara."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "A carregar..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Indisponível"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Inacessível"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Inativa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "A preparar..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "A Imprimir"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Sem título"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anónimo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Requer alterações na configuração"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Detalhes"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Impressora indisponível"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Primeira disponível"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Em fila"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gerir no browser"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Não existem trabalhos de impressão na fila. Para adicionar um trabalho, seccione e envie."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Trabalhos em Impressão"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Tempo de impressão total"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "A aguardar"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Imprimir Através da Rede"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Imprimir"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Seleção de Impressora"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Alterações na configuração"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Ignorar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "A impressora atribuída %1 requer a seguinte alteração na configuração:"
 msgstr[1] "A impressora atribuída %1 requer as seguintes alterações na configuração:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "A impressora %1 está atribuída, mas o trabalho tem uma configuração de material desconhecida."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Alterar o material %1 de %2 para %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "Carregar %3 como material %1 (isto não pode ser substituído)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Substituir o print core %1 de %2 para %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Alterar base de construção para %1 (isto não pode ser substituído)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Ignorar utilizará as definições especificadas com a configuração da impressora existente. Tal pode resultar numa falha de impressão."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Alumínio"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Impressão terminada"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "A cancelar..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Cancelado"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Falhou"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "A colocar em pausa..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Em Pausa"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "A recomeçar..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Imprimir Através da Rede"
 
-# rever!
-# ver contexto!
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Ação necessária"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Imprimir"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Termina %1 a %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Seleção de Impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Ligar a uma Impressora em Rede"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Para imprimir diretamente para a sua impressora através da rede, certifique-se de que a impressora está ligada à rede através de um cabo de rede ou através de ligação à rede Wi-Fi. Se não ligar o Cura por rede à impressora, poderá ainda assim utilizar uma unidade USB para transferir ficheiros g-code para a impressora."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Selecione a impressora a partir da lista abaixo:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Editar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Remover"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Atualizar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Se a sua impressora não estiver na lista, por favor, consulte o <a href='%1'>guia de resolução de problemas de impressão em rede</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tipo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Versão de Firmware"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Endereço"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Esta impressora não está configurada para alojar um grupo de impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Esta impressora aloja um grupo de %1 impressoras."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "A impressora neste endereço ainda não respondeu."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Ligar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Endereço IP inválido"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Introduza um endereço IP válido."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Endereço da Impressora"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Introduza o endereço IP da sua impressora na rede."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Impressora indisponível"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "Primeira disponível"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Mover para o topo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Eliminar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Retomar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "A colocar em pausa..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "A recomeçar..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Colocar em pausa"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "A cancelar..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Cancelar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Tem a certeza de que pretende mover %1 para o topo da fila?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Mover trabalho de impressão para o topo"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Tem a certeza de que pretende eliminar %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Eliminar trabalho de impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Tem a certeza de que deseja cancelar %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Cancelar impressão"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "Em fila"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gerir no browser"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Não existem trabalhos de impressão na fila. Para adicionar um trabalho, seccione e envie."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Trabalhos em Impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Tempo de impressão total"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "A aguardar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Esquema de cores"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Cor do Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Tipo de Linha"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Velocidade"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Espessura da Camada"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Diâmetro da Linha"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Fluxo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Modo Compatibilidade"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Deslocações"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Auxiliares"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Invólucro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Enchimento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "A Iniciar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Só Camadas Superiores"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "5 Camadas Superiores Detalhadas"
+
+# rever!
+# todas as strings com a frase
+# Topo / Base ??
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Superior / Inferior"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Parede Interior"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "mín"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "máx"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Certifique-se de que é possível estabelecer ligação com a impressora:\n"
-"- Verifique se a impressora está ligada.\n"
-"- Verifique se a impressora está ligada à rede.\n"
-"- Verifique se tem sessão iniciada para encontrar impressoras ligadas através da cloud."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Ligue a impressora à sua rede."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Altura (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Ver manuais do utilizador online"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "A distância máxima de cada pixel desde a \"Base\""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Para monitorizar a sua impressão a partir do Cura, ligue a impressora."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+# rever!
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Alguns factores podem vir a ser problemáticos nesta impressão. Clique para ver algumas sugestões para melhorar a qualidade da impressão."
+msgid "The base height from the build plate in millimeters."
+msgstr "A altura da \"Base\" desde a base de construção em milímetros."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Largura (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Vista 3D"
+msgid "The width in millimeters on the build plate"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profundidade (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Vista Frente"
+msgid "The depth in millimeters on the build plate"
+msgstr "A profundidade em milímetros na base de construção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Mais escuro é mais alto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Mais claro é mais alto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Vista Cima"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Para litofanias, os pixels escuros devem corresponder a localizações mais espessas para bloquear mais a passagem da luz. Para mapas de altura, os pixels mais claros significam um terreno mais alto, por isso, os pixels mais claros devem corresponder a localizações mais espessas no modelo 3D gerado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Linear"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Translucidez"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Vista esquerda"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Está disponível um modelo logarítmico simples para definir a translucidez das litofanias. Para mapas de altura, os valores dos pixels correspondem de forma linear à elevação."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "(%) transmitância de 1 mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Vista direita"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "A percentagem de luz que penetra numa impressão com uma espessura de 1 milímetro. Diminuir este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Lista de objetos"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Suavização"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "A quantidade de suavização a aplicar à imagem."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Mercado"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Ficheiro"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Abrir Projeto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Editar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Atualizar existente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Visualizar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Criar nova"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Definições"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Resumo – Projeto Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensões"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Como deve ser resolvido o conflito da máquina?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&referências"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Definições da impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Ajuda"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tipo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Novo projeto"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Grupo da Impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Tem a certeza de que deseja iniciar um novo projeto? Isto irá apagar tudo na base de construção assim como quaisquer definições que não tenham sido guardadas."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Como deve ser resolvido o conflito no perfil?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "A Seccionar..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Definições do perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Não é possível seccionar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nome"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Inexistente no perfil"
+
+# rever!
+# contexto?!
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 substituição"
+msgstr[1] "%1 substituições"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivado de"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 substituição"
+msgstr[1] "%1, %2 substituições"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Como deve ser resolvido o conflito no material?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Definições de material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Visibilidade das definições"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Definições visíveis:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 de %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Abrir um projeto irá apagar todos os modelos na base de construção."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Abrir"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "A processar"
+msgid "Want more?"
+msgstr "Deseja mais?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Seccionar"
+msgid "Backup Now"
+msgstr "Efetuar cópia de segurança agora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Iniciar o processo de seccionamento"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Efetuar cópia de segurança automaticamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Cancelar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Criar automaticamente uma cópia de segurança sempre que o Cura é iniciado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Estimativa de tempo"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Versão do Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Estimativa de material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Máquinas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Perfis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Nenhuma estimativa de tempo disponível"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plug-ins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Nenhuma estimativa de custos disponível"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Restaurar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Eliminar cópia de segurança"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Tem a certeza de que pretende eliminar esta cópia de segurança? Esta ação não pode ser anulada."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Restaurar cópia de segurança"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "É necessário reiniciar o Cura para restaurar a sua cópia de segurança. Pretende fechar o Cura agora?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Efetue a cópia de segurança e sincronize as suas definições do Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Pré-visualizar"
+msgid "Sign in"
+msgstr "Iniciar sessão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Adicionar uma impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "As minhas cópias de segurança"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Atualmente não existem quaisquer cópias de segurança. Utilize o botão \"Efetuar cópia de segurança agora\" para criar uma."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Durante a fase de pré-visualização, terá um limite de 5 cópias de segurança visíveis. Remova uma cópia de segurança para ver as antigas."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cópias de segurança do Cura"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Mais informações sobre a recolha anónima de dados"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador. Segue-se um exemplo de todos os dados partilhados:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Não pretendo enviar dados anónimos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Permitir o envio de dados anónimos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Plug-in de pós-processamento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Adicionar uma impressora em rede"
+msgid "Post Processing Scripts"
+msgstr "Scripts de pós-processamento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Adicionar um script"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Adicionar uma impressora sem rede"
+msgid "Settings"
+msgstr "Definições"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Altere os scripts de pós-processamento."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "O script a seguir está ativo:"
+msgstr[1] "Os seguintes scripts estão ativos:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Adicionar uma impressora de cloud"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Selecione quaisquer atualizações realizadas a esta Ultimaker Original"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "A aguardar resposta da cloud"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Base de Construção Aquecida (kit oficial ou de construção própria)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivelamento da Base de Construção"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Não foram encontradas impressoras na sua conta?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Para assegurar uma boa qualidade das suas impressões, pode agora ajustar a base de construção. Quando clica em \"Avançar para a posição seguinte\", o nozzle irá deslocar-se para as diferentes posições que podem ser ajustadas."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "As seguintes impressoras na sua conta foram adicionadas no Cura:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Para cada posição, introduza um pedaço de papel debaixo do nozzle e ajuste a altura da base de construção. A altura da base de construção está correta quando o papel fica ligeiramente preso pelo nozzle."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Iniciar Nivelamento da base de construção"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Avançar para Posição Seguinte"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Adicionar impressora manualmente"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Adicionar impressora por endereço IP"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Introduza o endereço IP da sua impressora."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Adicionar"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Não foi possível ligar ao dispositivo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Sair %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Não se consegue ligar a uma impressora Ultimaker?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "A impressora neste endereço ainda não respondeu."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Não foi possível adicionar esta impressora porque é uma impressora desconhecida ou não aloja um grupo."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Anterior"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Ligar"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Contrato de utilizador"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Rejeitar e fechar"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Bem-vindo ao Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
-msgstr "Siga estes passos para configurar o Ultimaker Cura. Este processo irá demorar apenas alguns momentos."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Iniciar"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Inicie a sessão na plataforma Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Adicione definições de materiais e plug-ins do Marketplace"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Efetue uma cópia de segurança e sincronize as definições de materiais e plug-ins"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Partilhe ideias e obtenha ajuda dos mais de 48.000 utilizadores da Comunidade Ultimaker"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Ignorar"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Rejeitar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Crie uma Conta Ultimaker gratuita"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Definições do nozzle"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabricante"
+msgid "Nozzle size"
+msgstr "Tamanho do nozzle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor do perfil"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Nome da impressora"
+msgid "Compatible material diameter"
+msgstr "Diâmetro do material compatível"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Atribuir um nome à impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Desvio X do Nozzle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Não foi encontrada nenhuma impressora na sua rede."
+msgid "Nozzle offset Y"
+msgstr "Desvio Y do Nozzle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Atualizar"
+msgid "Cooling Fan Number"
+msgstr "Número de ventoinha de arrefecimento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "G-code inicial do extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "G-code final do extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Definições da impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Adicionar impressora por IP"
+msgid "X (Width)"
+msgstr "X (Largura)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Adicionar impressora de cloud"
+msgid "Y (Depth)"
+msgstr "Y (Profundidade)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Resolução de problemas"
+msgid "Z (Height)"
+msgstr "Z (Altura)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ajude-nos a melhorar o Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "Forma da base de construção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador, incluindo:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Origem no centro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Tipos de máquina"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Base aquecida"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Utilização do material"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volume de construção aquecido"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Número de Secções"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Variante do G-code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Definições de impressão"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Definições da cabeça de impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Os dados recolhidos pelo Ultimaker Cura não conterão quaisquer informações pessoais."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X mín"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Mais informações"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y mín"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "Novidades"
+msgid "X max"
+msgstr "X máx"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Vazio"
+msgid "Y max"
+msgstr "Y máx"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Notas da versão"
+msgid "Gantry Height"
+msgstr "Altura do pórtico"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Número de Extrusores"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Aplicar desvios da extrusora ao GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-code inicial"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-code final"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "As minhas impressoras"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Monitorize as impressoras no Ultimaker Digital Factory."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Crie projetos de impressão na Digital Library."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Trabalhos em Impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Monitorize os trabalhos de impressão e volte a imprimir a partir do histórico de impressão."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Tire mais partido do Ultimaker Cura com plug-ins e perfis de materiais."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Torne-se um perito em impressão 3D com os cursos de e-learning da Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Suporte da Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Saiba como começar a utilizar o Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Faça uma pergunta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Consulte a Comunidade Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Reportar um erro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Informe os programadores quando houver algum problema."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Visite o site da Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Imprimir Modelo Selecionado com o %1"
+msgstr[1] "Imprimir Modelos Selecionados com o %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Definições"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Novo projeto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Tem a certeza de que deseja iniciar um novo projeto? Isto irá apagar tudo na base de construção assim como quaisquer definições que não tenham sido guardadas."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Mercado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Base de construção"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "A temperatura desejada da base aquecida. A base irá aquecer ou arrefecer até esta temperatura. Se esta opção for definida como 0, o aquecimento da base será desligado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "A temperatura atual da base aquecida."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "A temperatura de pré-aquecimento da base."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Cancelar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Preaquecer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Aqueçer a base com antecedência antes de imprimir. Pode continuar a ajustar as definições de impressão durante o aquecimento e não precisará de esperar que a base aqueça quando começar a impressão."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "A impressora não está ligada."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Controlo da impressora"
+
+# rever!
+# contexto?!
+# Jog?
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Posição de deslocação"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+# rever!
+# contexto?!
+# Jog?
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Distância de deslocação"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Enviar G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Enviar um comando G-code personalizado para a impressora ligada. Prima \"Enter\" para enviar o comando."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "A temperatura-alvo do extrusor. O extrusor irá aquecer ou arrefecer até esta temperatura. Se esta opção for definida como 0, o aquecimento do extrusor será desligado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "A temperatura atual deste extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "A temperatura-alvo de preaquecimento do extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Aquecer o extrusor com antecedência antes de imprimir. Pode continuar a ajustar as definições de impressão durante o aquecimento e não precisará de esperar que o extrusor aqueça quando começar a impressão."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "A cor do material neste extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "O material neste extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "O nozzle inserido neste extrusor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Abrir ficheiro de projeto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Este ficheiro é um Projeto do Cura. Pretende abrir como Projeto ou só importar os modelos 3D incluídos no Projeto?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Memorizar a minha escolha"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Abrir como projeto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importar modelos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Guardar projeto"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Extrusor %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Não mostrar novamente o resumo do projeto ao guardar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Guardar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Abrir ficheiro(s)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Encontrámos um ou mais projetos do Cura nos ficheiros selecionados. Só é possível abrir um Projeto do Cura, de cada vez. Sugerimos importar apenas os modelos 3D desses Projetos do Cura. Deseja continuar?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Importar tudo como modelos 3D"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Acerca de %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versão: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "A Solução completa para a impressão 3D por filamento fundido."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3782,420 +3623,701 @@ msgstr ""
 "O Cura foi desenvolvido pela Ultimaker B.V. em colaboração com a comunidade.\n"
 "O Cura tem o prazer de utilizar os seguintes projetos open source:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interface gráfica do utilizador"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Framework da aplicação"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Gerador de G-code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Biblioteca de comunicação interprocessual"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Linguagem de programação"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI framework"
 
 # rever!
 # use eng programing terms?
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Ligações de estrutura da GUI"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Biblioteca de ligações C/C++"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formato de intercâmbio de dados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Biblioteca de apoio para computação científica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Biblioteca de apoio para cálculos mais rápidos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Biblioteca de apoio para processamento de ficheiros STL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Biblioteca de apoio para processamento de objetos planos"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Biblioteca de apoio para processamento de malhas triangulares"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Biblioteca de apoio para processamento de ficheiros 3MF"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Biblioteca de apoio para transmissões de fluxo e metadados de ficheiros"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Biblioteca de comunicação em série"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Biblioteca de deteção ZeroConf"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Biblioteca de recortes de polígonos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Verificador de tipo estático para Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificados de raiz para validar a credibilidade SSL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Biblioteca de controlo de erros de Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Biblioteca de embalagens de polígonos, desenvolvida pela Prusa Research"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Ligações Python para libnest2d"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Biblioteca de apoio para acesso às chaves de sistema"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Extensões Python para Microsoft Windows"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Tipo de letra"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Ícones SVG"
 
 # rever!
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Implementação da aplicação de distribuição cruzada Linux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Abrir ficheiro(s)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Encontrámos um ou mais projetos do Cura nos ficheiros selecionados. Só é possível abrir um Projeto do Cura, de cada vez. Sugerimos importar apenas os modelos 3D desses Projetos do Cura. Deseja continuar?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Importar tudo como modelos 3D"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Guardar projeto"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Extrusor %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & material"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Material"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Não mostrar novamente o resumo do projeto ao guardar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Guardar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Descartar ou Manter as alterações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"Personalizou algumas definições de perfil.\n"
-"Pretende manter estas definições alteradas depois de trocar de perfis?\n"
-"Como alternativa, pode descartar as alterações para carregar as predefinições a partir de '%1'."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Definições do perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Alterações atuais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Perguntar sempre isto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Descartar e não perguntar novamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Manter e não perguntar novamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Descartar alterações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Manter alterações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Abrir ficheiro de projeto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "Nenhum item para selecionar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Este ficheiro é um Projeto do Cura. Pretende abrir como Projeto ou só importar os modelos 3D incluídos no Projeto?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Abrir ficheiro(s)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Memorizar a minha escolha"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Abrir &Recente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Abrir como projeto"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Definições Visíveis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importar modelos"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Fechar todas as categorias"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gerir Visibilidade das Definições..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Definir como Extrusor Ativo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Ativar Extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Desativar Extrusor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoritos"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Genérico"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Ajuda"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Ficheiro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Guardar projeto..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportar..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Exportar seleção..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&referências"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Editar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Impressoras em rede"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Impressoras locais"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensões"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configurações"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Impressão ativa"
+msgid "Loading available configurations from the printer..."
+msgstr "A carregar as configurações disponíveis da impressora..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Nome do trabalho"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "As configurações não estão disponíveis porque a impressora está desligada."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tempo de Impressão"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Esta configuração não está disponível porque não foi possível reconhecer %1. Visite %2 para transferir o perfil de material correto."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Tempo restante estimado"
+msgid "Marketplace"
+msgstr "Mercado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "A impressora de cloud está offline. Verifique se a impressora está ligada e conectada à Internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "A configuração deste extrusor não é permitida o que impede o seccionamento."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Esta impressora não está associada à sua conta. Visite a Ultimaker Digital Factory para estabelecer uma ligação."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "Não existem perfis que correspondam à configuração deste extrusor."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "A conectividade de cloud está atualmente indisponível. Inicie sessão para estabelecer ligação com a impressora de cloud."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Selecionar configuração"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "A conectividade de cloud está atualmente indisponível. Verifique a sua ligação à Internet."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configurações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Adicionar Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Gerir impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Impressoras ligadas"
+msgid "Enabled"
+msgstr "Ativado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Impressoras predefinidas"
+msgid "Material"
+msgstr "Material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Definições de impressão"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Utilizar cola para melhor aderência com esta combinação de materiais."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Configuração de impressão desativada. O ficheiro G-code não pode ser modificado."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Imprimir Modelo Selecionado Com:"
+msgstr[1] "Imprimir modelos selecionados com:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Multiplicar Modelo Selecionado"
+msgstr[1] "Multiplicar modelos selecionados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Perfil"
+msgid "Number of Copies"
+msgstr "Número de Cópias"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Guardar projeto..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Visualizar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Posição da câmara"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Vista da câmara"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspetiva"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Ortográfica"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Ver tipo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Inicie a sessão na plataforma Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Alguns valores de definição/substituição são diferentes dos valores armazenados no perfil.\n"
-"\n"
-"Clique para abrir o gestor de perfis."
+"- Adicione definições de materiais e plug-ins do Marketplace\n"
+"- Efetue uma cópia de segurança e sincronize as definições de materiais e plug-ins\n"
+"- Partilhe ideias e obtenha ajuda dos mais de 48.000 utilizadores da Comunidade Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Perfis personalizados"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Crie uma conta Ultimaker gratuita"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Descartar alterações atuais"
+msgid "Sign in"
+msgstr "Iniciar sessão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Atualização mais recente: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Recomendado"
+msgid "Ultimaker Account"
+msgstr "Conta Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Personalizado"
+msgid "Sign Out"
+msgstr "Terminar sessão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "A verificar..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Conta sincronizada"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Ocorreu um problema..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Instalar atualizações pendentes"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Verificar atualizações de conta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "A Seccionar..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Não é possível seccionar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "A processar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Seccionar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Iniciar o processo de seccionamento"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Cancelar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Estimativa de tempo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Estimativa de material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Nenhuma estimativa de tempo disponível"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Nenhuma estimativa de custos disponível"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Pré-visualizar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Este pacote será instalado após reiniciar."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Geral"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Definições"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Impressoras"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiais"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Perfis"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "A fechar %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Tem a certeza de que pretende sair de %1?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Instalar Pacote"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Abrir ficheiro(s)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Encontrámos um ou mais ficheiros G-code nos ficheiros selecionados. Só é possível abrir um ficheiro G-code de cada vez. Se pretender abrir um ficheiro G-code, selecione apenas um."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Adicionar Impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Novidades"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Ligado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Desligado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Experimental"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Definições de impressão"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Configuração de impressão desativada. O ficheiro G-code não pode ser modificado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Recomendado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personalizado"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "Não existe um perfil %1 para a configuração do extrusor %2. O objetivo predefinido será usado como alternativa"
 msgstr[1] "Não existe um perfil %1 para as configurações dos extrusores %2. O objetivo predefinido será usado como alternativa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Perfis"
+msgid "Gradual infill"
+msgstr "Enchimento gradual"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Algumas definições do perfil foram modificadas. Se pretender alterá-las, aceda ao modo Personalizado."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "O enchimento gradual irá aumentar progressivamente a densidade do enchimento em direção ao topo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Suportes"
@@ -4203,1833 +4325,1704 @@ msgstr "Suportes"
 # rever!
 # collapse ?
 # desmoronar? desabar?
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Criar estruturas para suportar partes do modelo, suspensas ou com saliências. Sem estas estruturas, essas partes do modelo podem desmoronar durante a impressão."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Enchimento gradual"
+msgid "Profiles"
+msgstr "Perfis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "O enchimento gradual irá aumentar progressivamente a densidade do enchimento em direção ao topo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Algumas definições do perfil foram modificadas. Se pretender alterá-las, aceda ao modo Personalizado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Aderência à Base de Construção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Permite a impressão de uma aba ou raft. Isto irá adicionar, respetivamente, uma área plana em torno ou sob a base do seu objeto, que são fáceis de retirar posteriormente."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Guardar projeto..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Perfis personalizados"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Impressoras em rede"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Descartar alterações atuais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Impressoras locais"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Alguns valores de definição/substituição são diferentes dos valores armazenados no perfil.\n"
+"\n"
+"Clique para abrir o gestor de perfis."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoritos"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Definição"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Genérico"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Imprimir Modelo Selecionado Com:"
-msgstr[1] "Imprimir modelos selecionados com:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Atual"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplicar Modelo Selecionado"
-msgstr[1] "Multiplicar modelos selecionados"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Número de Cópias"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Guardar projeto..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportar..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Exportar seleção..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Visibilidade das Definições"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configurações"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personalizado"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Selecionar tudo"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Ativar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Mudar Nome"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Confirmar Alteração de Diâmetro"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "O novo diâmetro do filamento está definido como %1 mm, o que não é compatível com o extrusor actual. Pretende prosseguir?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Impressora"
+msgid "Display Name"
+msgstr "Nome"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Ativado"
+msgid "Brand"
+msgstr "Marca"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Material"
+msgid "Material Type"
+msgstr "Tipo de Material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Utilizar cola para melhor aderência com esta combinação de materiais."
+msgid "Color"
+msgstr "Cor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "A configuração deste extrusor não é permitida o que impede o seccionamento."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "Não existem perfis que correspondam à configuração deste extrusor."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Propriedades"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Selecionar configuração"
+msgid "Density"
+msgstr "Densidade"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configurações"
+msgid "Diameter"
+msgstr "Diâmetro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "A carregar as configurações disponíveis da impressora..."
+msgid "Filament Cost"
+msgstr "Custo do Filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "As configurações não estão disponíveis porque a impressora está desligada."
+msgid "Filament weight"
+msgstr "Peso do Filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Esta configuração não está disponível porque não foi possível reconhecer %1. Visite %2 para transferir o perfil de material correto."
+msgid "Filament length"
+msgstr "Comprimento do filamento"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Mercado"
+msgid "Cost per Meter"
+msgstr "Custo por Metro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Abrir ficheiro(s)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Este material está associado a %1 e partilha algumas das suas propriedades."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Desassociar Material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Descrição"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Definir como Extrusor Ativo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informações de Aderência"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Ativar Extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Informações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Desativar Extrusor"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Sincronizar materiais com impressoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Abrir &Recente"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Sincronizar materiais com impressoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Definições Visíveis"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "Com alguns passos simples poderá sincronizar todos os seus perfis de materiais com as suas impressoras."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Fechar todas as categorias"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "Por que motivo tenho de sincronizar os perfis de materiais?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gerir Visibilidade das Definições..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Começar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Posição da câmara"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Iniciar sessão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Vista da câmara"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Para sincronizar automaticamente os perfis de materiais com todas as impressoras ligadas à Digital Factory, tem de ter uma sessão iniciada no Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspetiva"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Sincronizar materiais através de USB"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortográfica"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "As seguintes impressoras vão receber os novos perfis de materiais:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Base de construção"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "Ocorreu um problema ao enviar os materiais para as impressoras."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Ver tipo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "Perfis de materiais foram sincronizados com êxito com as seguintes impressoras:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "É imprimido como suporte."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Resolução de problemas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Foram modificados outros modelos sobrepostos com este modelo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "Faltam impressoras?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Foi modificada a sobreposição de enchimento com este modelo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Certifique-se de que todas as impressoras estão ON e ligadas com a Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Não são suportadas sobreposições com este modelo."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Atualizar lista"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Substitui %1 definição."
-msgstr[1] "Substitui %1 definições."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Tente novamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Perfis"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Concluído"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Ativar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Sincronizar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Criar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "A sincronizar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "Não foi encontrada nenhuma impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Parece que não tem nenhuma impressora compatível ligada com a Digital Factory. Certifique-se de que a impressora está ligada e que tem o firmware mais recente instalado."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Saiba como ligar a sua impressora à Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Atualizar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Sincronizar perfis de materiais via USB"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Siga os seguintes passos para instalar os novos perfis de materiais na sua impressora."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Clique no botão para exportar o ficheiro de material."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "Guarde o ficheiro .umm numa unidade USB."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "Insira a unidade USB na impressora e inicie o procedimento para carregar novos perfis de materiais."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Como carregar novos perfis de materiais para a minha impressora"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Anterior"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Exportar ficheiro de material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Exportar Todos os Materiais"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplicar"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Mudar Nome"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Importar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Exportar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Criar Perfil"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Forneça um nome para este perfil."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplicar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplicar Perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exportar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Confirmar Remoção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Tem a certeza de que deseja remover o perfil %1? Não é possível desfazer esta ação!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Mudar Nome do Perfil"
+msgid "Import Material"
+msgstr "Importar material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importar Perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Material <filename>%1</filename> importado com êxito"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Não foi possível importar o material <filename>%1</filename>: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exportar Perfil"
+msgid "Export Material"
+msgstr "Exportar Material"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Falha ao exportar material para <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Impressora: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Material exportado com êxito para <filename>%1</filename>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Atualizar perfil com as definições/substituições atuais"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Este perfil utiliza as predefinições especificadas pela impressora, pelo que não tem quaisquer definições/substituições na lista seguinte."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "As suas definições atuais correspondem ao perfil selecionado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Definições Globais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Geral"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Criar Perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Forneça um nome para este perfil."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exportar Perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplicar Perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Mudar Nome do Perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importar Perfil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Moeda:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Tema:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "É necessário reiniciar a aplicação para que estas alterações sejam aplicadas."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Seccionar automaticamente ao alterar as definições."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Seccionar automaticamente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportamento da janela"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Realçar, a vermelho, as áreas do modelo sem apoio. Sem suporte, estas áreas podem não ser impressas correctamente."
 
 # rever!
 # consolas?
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Mostrar Saliências (Overhangs)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Destaque as superfícies extra ou em falta do modelo utilizando sinais de aviso. As trajetórias de ferramentas irão falhar muitas vezes partes da geometria pretendida."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Apresentar erros de modelo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Move a câmara de forma que o modelo fique no centro da visualização quando é selecionado um modelo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centrar câmara ao selecionar item"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "O comportamento de zoom predefinido do Cura deve ser invertido?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverta a direção do zoom da câmera."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "O zoom deve deslocar-se na direção do rato?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Fazer zoom em direção ao rato não é suportado na perspetiva ortográfica."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Fazer Zoom na direção do rato"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Os modelos, na plataforma, devem ser movidos para que não se intersectem?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Garantir que os modelos não se interceptam"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Pousar os modelos na base de construção?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Pousar automaticamente os modelos na base de construção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Mostrar mensagem de aviso no leitor de g-code."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Mensagem de aviso no leitor de g-code"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "A vista por camada deve ser forçada a utilizar o modo de compatibilidade?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forçar o modo de compatibilidade na visualização por camada (é necessário reiniciar)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "O Cura deve abrir na localização onde foi fechado?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurar posição da janela ao iniciar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Que tipo de composição de câmara deve ser utilizado?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Composição de câmara:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Perspetiva"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Ortográfica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Abrir e guardar ficheiros"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Pretende que os ficheiros abertos a partir do ambiente de trabalho ou de aplicações externas sejam executados na mesma instância do Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Utilizar uma única instância do Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "Limpar a base de construção antes de carregar um novo modelo na instância única do Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Limpar base de construção antes de carregar o modelo na instância única"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Os modelos devem ser redimensionados até ao volume de construção se forem demasiado grandes?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Redimensionar modelos demasiado grandes"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Um modelo pode parecer extremamente pequeno se, por exemplo, este tiver sido criado em metros e não em milímetros. Estes modelos devem ser redimensionados?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Redimensionar modelos extremamente pequenos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Selecionar os modelos depois de abertos?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Selecionar os modelos depois de abertos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Deve um prefixo com base no nome da impressora ser adicionado ao nome do trabalho de impressão automaticamente?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Adicionar prefixo da máquina ao nome do trabalho"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Deve ser apresentado um resumo ao guardar um ficheiro de projeto?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Mostrar caixa de diálogo de resumo ao guardar projeto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportamento predefinido ao abrir um ficheiro de projeto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportamento predefinido ao abrir um ficheiro de projeto: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Perguntar sempre isto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Abrir sempre como projeto"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Importar sempre modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Quando tiver realizado alterações a um perfil e mudado para outro, será apresentada uma caixa de diálogo a perguntar se pretende manter as alterações. Caso contrário, pode escolher um comportamento predefinido, sendo que a caixa de diálogo nunca mais é apresentada."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportamento predefinido para valores de definição alterados ao mudar para um perfil diferente: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Descartar sempre definições alteradas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Transferir sempre definições alteradas para o novo perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacidade"
 
 # rever!
 # legal wording
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Podem alguns dados anónimos sobre a impressão ser enviados para a Ultimaker? Não são enviadas, nem armazenadas, quaisquer informações pessoais, incluindo modelos, endereços IP ou outro tipo de identificação pessoal."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Enviar dados (anónimos) sobre a impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Mais informações"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Atualizações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "O Cura deve procurar atualizações quando o programa é iniciado?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Procurar atualizações ao iniciar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "Quando se verificar se existem atualizações, verificar apenas a existência de versões estáveis."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Apenas versões estáveis"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "Quando se verificar se existem atualizações, verificar tanto a existência de versões estáveis como de versões beta."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "Versões estáveis e beta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Fazer uma verificação automática de novos plug-ins sempre que o Cura for iniciado? Recomenda-se vivamente que não desative esta opção!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Receber notificações para atualizações de plug-ins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informações"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Adicionar impressora por endereço IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Confirmar Alteração de Diâmetro"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Introduza o endereço IP da sua impressora."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "O novo diâmetro do filamento está definido como %1 mm, o que não é compatível com o extrusor actual. Pretende prosseguir?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Adicionar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Nome"
+msgid "Could not connect to device."
+msgstr "Não foi possível ligar ao dispositivo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Tipo de Material"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Não se consegue ligar a uma impressora Ultimaker?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Cor"
+msgid "The printer at this address has not responded yet."
+msgstr "A impressora neste endereço ainda não respondeu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Propriedades"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Não foi possível adicionar esta impressora porque é uma impressora desconhecida ou não aloja um grupo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densidade"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Ligar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Diâmetro"
+msgid "Release Notes"
+msgstr "Notas da versão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Custo do Filamento"
+msgid "User Agreement"
+msgstr "Contrato de utilizador"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Peso do Filamento"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Concordar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Comprimento do filamento"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Rejeitar e fechar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Custo por Metro"
+msgid "What's New"
+msgstr "Novidades"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Seguinte"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Este material está associado a %1 e partilha algumas das suas propriedades."
+msgid "Add a Cloud printer"
+msgstr "Adicionar uma impressora de cloud"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Desassociar Material"
+msgid "Waiting for Cloud response"
+msgstr "A aguardar resposta da cloud"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Descrição"
+msgid "No printers found in your account?"
+msgstr "Não foram encontradas impressoras na sua conta?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informações de Aderência"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "As seguintes impressoras na sua conta foram adicionadas no Cura:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Criar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Adicionar impressora manualmente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplicar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Adicione definições de materiais e plug-ins do Marketplace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Sincronizar com Impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Efetue uma cópia de segurança e sincronize as definições de materiais e plug-ins"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Partilhe ideias e obtenha ajuda dos mais de 48.000 utilizadores da Comunidade Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importar material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Ignorar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Não foi possível importar o material <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Crie uma Conta Ultimaker gratuita"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Material <filename>%1</filename> importado com êxito"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Bem-vindo ao Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exportar Material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr "Siga estes passos para configurar o Ultimaker Cura. Este processo irá demorar apenas alguns momentos."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Falha ao exportar material para <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Iniciar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Material exportado com êxito para <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vazio"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Sincronizar materiais com impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricante"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Sincronizar materiais com impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor do perfil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "Com alguns passos simples poderá sincronizar todos os seus perfis de materiais com as suas impressoras."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nome da impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Começar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Atribuir um nome à impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "Por que motivo tenho de sincronizar os perfis de materiais?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Adicionar uma impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Iniciar sessão"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Adicionar uma impressora em rede"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Para sincronizar automaticamente os perfis de materiais com todas as impressoras ligadas à Digital Factory, tem de ter uma sessão iniciada no Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Adicionar uma impressora sem rede"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Sincronizar materiais através de USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Não foi encontrada nenhuma impressora na sua rede."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "As seguintes impressoras vão receber os novos perfis de materiais:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Atualizar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "Ocorreu um problema ao enviar os materiais para as impressoras."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Adicionar impressora por IP"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "Perfis de materiais foram sincronizados com êxito com as seguintes impressoras:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Adicionar impressora de cloud"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Resolução de problemas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "Faltam impressoras?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ajude-nos a melhorar o Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Certifique-se de que todas as impressoras estão ON e ligadas com a Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Atualizar lista"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Tente novamente"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Concluído"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador, incluindo:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Sincronizar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Tipos de máquina"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "A sincronizar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Utilização do material"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "Não foi encontrada nenhuma impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Número de Secções"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Parece que não tem nenhuma impressora compatível ligada com a Digital Factory. Certifique-se de que a impressora está ligada e que tem o firmware mais"
-" recente instalado."
+msgid "Print settings"
+msgstr "Definições de impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Saiba como ligar a sua impressora à Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Os dados recolhidos pelo Ultimaker Cura não conterão quaisquer informações pessoais."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Atualizar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Mais informações"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Sincronizar perfis de materiais via USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lista de objetos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Siga os seguintes passos para instalar os novos perfis de materiais na sua impressora."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "É imprimido como suporte."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Clique no botão para exportar o ficheiro de material."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "Foram modificados outros modelos sobrepostos com este modelo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "Guarde o ficheiro .umm numa unidade USB."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "Foi modificada a sobreposição de enchimento com este modelo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "Insira a unidade USB na impressora e inicie o procedimento para carregar novos perfis de materiais."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "Não são suportadas sobreposições com este modelo."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Como carregar novos perfis de materiais para a minha impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Substitui %1 definição."
+msgstr[1] "Substitui %1 definições."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Exportar ficheiro de material"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Impressoras ligadas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Exportar Todos os Materiais"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Impressoras predefinidas"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Visibilidade das Definições"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "A impressora de cloud está offline. Verifique se a impressora está ligada e conectada à Internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Selecionar tudo"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Esta impressora não está associada à sua conta. Visite a Ultimaker Digital Factory para estabelecer uma ligação."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Impressoras"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "A conectividade de cloud está atualmente indisponível. Inicie sessão para estabelecer ligação com a impressora de cloud."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calculado"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "A conectividade de cloud está atualmente indisponível. Verifique a sua ligação à Internet."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Definição"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Adicionar Impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Perfil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Gerir impressoras"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Atual"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unidade"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Sem título"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Sem ligação a uma impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "A impressora não aceita comandos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "Em manutenção. Verifique a impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Perdeu-se a ligação com a impressora"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "A imprimir..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Em pausa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "A preparar..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Remova a impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Cancelar impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Tem a certeza de que deseja cancelar a impressão?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Imprimir Modelo Selecionado com o %1"
-msgstr[1] "Imprimir Modelos Selecionados com o %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "As minhas impressoras"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Monitorize as impressoras no Ultimaker Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Crie projetos de impressão na Digital Library."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Trabalhos em Impressão"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Monitorize os trabalhos de impressão e volte a imprimir a partir do histórico de impressão."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Tire mais partido do Ultimaker Cura com plug-ins e perfis de materiais."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Torne-se um perito em impressão 3D com os cursos de e-learning da Ultimaker."
+# rever!
+# ocultas?
+# escondidas?
+# valor normal? automatico?
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Algumas das definições invisíveis têm valores diferentes dos valores normais calculados automaticamente.\n"
+"\n"
+"Clique para tornar estas definições visíveis."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Suporte da Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Procurar definições"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Saiba como começar a utilizar o Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copiar valor para todos os extrusores"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Faça uma pergunta"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copiar todos os valores alterados para todos os extrusores"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Consulte a Comunidade Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Esconder esta definição"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Reportar um erro"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Não mostrar esta definição"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Informe os programadores quando houver algum problema."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Manter esta definição visível"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Visite o site da Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configurar visibilidade das definições..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Printer control"
-msgstr "Controlo da impressora"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Esta definição não é utilizada porque todas as definições influenciadas foram substituídas."
 
 # rever!
-# contexto?!
-# Jog?
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
-msgctxt "@label"
-msgid "Jog Position"
-msgstr "Posição de deslocação"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+# Afeta?
+# Influencia?
+# Altera?
+# Modifica?
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Modifica"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Modificado Por"
 
-# rever!
-# contexto?!
-# Jog?
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Distância de deslocação"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Esta definição é sempre partilhada entre todos os extrusores. Ao alterá-la aqui, o valor será alterado em todos os extrusores."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Enviar G-code"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Enviar um comando G-code personalizado para a impressora ligada. Prima \"Enter\" para enviar o comando."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Esta definição está resolvida a partir de valores específicos da extrusora em conflito:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Extrusor"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "A temperatura-alvo do extrusor. O extrusor irá aquecer ou arrefecer até esta temperatura. Se esta opção for definida como 0, o aquecimento do extrusor será desligado."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "A temperatura atual deste extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "A temperatura-alvo de preaquecimento do extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Preaquecer"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Aquecer o extrusor com antecedência antes de imprimir. Pode continuar a ajustar as definições de impressão durante o aquecimento e não precisará de esperar que o extrusor aqueça quando começar a impressão."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "A cor do material neste extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "O material neste extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "O nozzle inserido neste extrusor."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "A impressora não está ligada."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Esta definição tem um valor que é diferente do perfil.\n"
+"\n"
+"Clique para restaurar o valor do perfil."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Base de construção"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "A temperatura desejada da base aquecida. A base irá aquecer ou arrefecer até esta temperatura. Se esta opção for definida como 0, o aquecimento da base será desligado."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "A temperatura atual da base aquecida."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "A temperatura de pré-aquecimento da base."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Aqueçer a base com antecedência antes de imprimir. Pode continuar a ajustar as definições de impressão durante o aquecimento e não precisará de esperar que a base aqueça quando começar a impressão."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Iniciar sessão"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Adicione definições de materiais e plug-ins do Marketplace\n"
-"- Efetue uma cópia de segurança e sincronize as definições de materiais e plug-ins\n"
-"- Partilhe ideias e obtenha ajuda dos mais de 48.000 utilizadores da Comunidade Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Crie uma conta Ultimaker gratuita"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Atualização mais recente: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Conta Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Terminar sessão"
+"Normalmente, o valor desta definição é calculado, mas atualmente tem definido um valor diferente.\n"
+"\n"
+"Clique para restaurar o valor calculado."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "A verificar..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Conta sincronizada"
+msgid "Active print"
+msgstr "Impressão ativa"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Ocorreu um problema..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Instalar atualizações pendentes"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Verificar atualizações de conta"
+msgid "Job Name"
+msgstr "Nome do trabalho"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Sem título"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tempo de Impressão"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "Nenhum item para selecionar"
+msgid "Estimated time left"
+msgstr "Tempo restante estimado"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mostrar Guia de resolução de problemas online"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Alternar para ecrã inteiro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Sair do Ecrã Inteiro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Desfazer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Refazer"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Sair"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "Vista 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Vista Frente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Vista Cima"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Vista Inferior"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Vista Lado Esquerdo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Vista Lado Direito"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Configurar Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Adicionar Impressora..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Gerir Im&pressoras..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Gerir Materiais..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Use o Mercado para adicionar outros materiais"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Atualizar perfil com as definições/substituições atuais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Descartar alterações atuais"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&Criar perfil a partir das definições/substituições atuais..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Gerir Perfis..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Mostrar &documentação online"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Reportar um &erro"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Novidades"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Sobre..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Apagar seleção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Centrar seleção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Multiplicar seleção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Apagar Modelo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Ce&ntrar Modelo na Base"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "&Agrupar Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Desagrupar Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "&Combinar Modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Multiplicar Modelo..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Selecionar todos os modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Limpar base de construção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Recarregar todos os modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Dispor todos os modelos em todas as bases de construção"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Dispor todos os modelos"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Dispor seleção"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Repor todas as posições de modelos"
 
 # rever!
 # Cancelar todas?
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Repor Todas as Transformações do Modelo"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Abrir Ficheiro(s)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Novo Projeto..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Mostrar pasta de configuração"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configurar visibilidade das definições..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Mercado"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Esta definição não é utilizada porque todas as definições influenciadas foram substituídas."
-
-# rever!
-# Afeta?
-# Influencia?
-# Altera?
-# Modifica?
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Modifica"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Modificado Por"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Esta definição é sempre partilhada entre todos os extrusores. Ao alterá-la aqui, o valor será alterado em todos os extrusores."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Esta definição está resolvida a partir de valores específicos da extrusora em conflito:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Esta definição tem um valor que é diferente do perfil.\n"
-"\n"
-"Clique para restaurar o valor do perfil."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Normalmente, o valor desta definição é calculado, mas atualmente tem definido um valor diferente.\n"
-"\n"
-"Clique para restaurar o valor calculado."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Procurar definições"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copiar valor para todos os extrusores"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copiar todos os valores alterados para todos os extrusores"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Esconder esta definição"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Não mostrar esta definição"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Manter esta definição visível"
-
-# rever!
-# ocultas?
-# escondidas?
-# valor normal? automatico?
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Algumas das definições invisíveis têm valores diferentes dos valores normais calculados automaticamente.\n"
-"\n"
-"Clique para tornar estas definições visíveis."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Este pacote será instalado após reiniciar."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Definições"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "A fechar %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Tem a certeza de que pretende sair de %1?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Instalar Pacote"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Vista 3D"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Abrir ficheiro(s)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Vista Frente"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Encontrámos um ou mais ficheiros G-code nos ficheiros selecionados. Só é possível abrir um ficheiro G-code de cada vez. Se pretender abrir um ficheiro G-code, selecione apenas um."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Vista Cima"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Adicionar Impressora"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Vista esquerda"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Novidades"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Vista direita"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Fornece as definições por-modelo."
+msgid "Provides a prepare stage in Cura."
+msgstr "Fornece uma fase de preparação no Cura."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Ferramenta de definições Por-Modelo"
+msgid "Prepare Stage"
+msgstr "Fase de preparação"
 
-#: CuraProfileReader/plugin.json
+# rever!
+# Fornece suporte para exportar perfis Cura.
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Fornece suporte para importar perfis Cura."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Possibilita a exportação de perfis do Cura."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Leitor de Perfis Cura"
+msgid "Cura Profile Writer"
+msgstr "Gravador de perfis Cura"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Fornece suporte para ler ficheiros X3D."
+msgid "Provides support for reading model files."
+msgstr "Fornece suporte para a leitura de ficheiros modelo."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "Leitor de X3D"
+msgid "Trimesh Reader"
+msgstr "Leitor de Trimesh"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Efetua uma cópia de segurança e repõe a sua configuração."
+msgid "Checks for firmware updates."
+msgstr "Procura e verifica se existem atualizações de firmware."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cópias de segurança do Cura"
+msgid "Firmware Update Checker"
+msgstr "Verificador Atualizações Firmware"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Proporciona uma forma de alterar as definições da máquina (tal como o volume de construção, o tamanho do nozzle, etc.)."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Regista determinados eventos para que possam ser utilizados pelo \"crash reporter\""
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Função Definições da Máquina"
+msgid "Sentry Logger"
+msgstr "Sentry Logger"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Cria um objecto usado para eliminar a impressão de suportes em certas zonas"
+msgid "Provides a monitor stage in Cura."
+msgstr "Fornece uma fase de monitorização no Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Eliminador de suportes"
+msgid "Monitor Stage"
+msgstr "Fase de monitorização"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -6041,105 +6034,106 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Plug-in de dispositivo de saída da unidade amovível"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Disponibiliza as ações da máquina para atualizar o firmware."
+msgid "Provides support for reading AMF files."
+msgstr "Fornece suporte para ler ficheiros AMF."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Atualizador de firmware"
+msgid "AMF Reader"
+msgstr "Leitor de AMF"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Permite importar perfis de versões antigas do Cura."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Fornece suporte para ler pacotes de formato Ultimaker."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Leitor de perfis antigos do Cura"
+msgid "UFP Reader"
+msgstr "Leitor de UFP"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Fornece suporte para ler ficheiros 3MF."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Liga à Biblioteca Digital, permitindo ao Cura abrir ficheiros da Biblioteca Digital e guardar ficheiros na mesma."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Leitor de 3MF"
+msgid "Ultimaker Digital Library"
+msgstr "Biblioteca Digital Ultimaker"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Permite a gravação de arquivos Ultimaker Format."
+msgid "Provides the Per Model Settings."
+msgstr "Fornece as definições por-modelo."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "Gravador de UFP"
+msgid "Per Model Settings Tool"
+msgstr "Ferramenta de definições Por-Modelo"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Regista determinados eventos para que possam ser utilizados pelo \"crash reporter\""
+msgid "Provides a machine actions for updating firmware."
+msgstr "Disponibiliza as ações da máquina para atualizar o firmware."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentry Logger"
+msgid "Firmware Updater"
+msgstr "Atualizador de firmware"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Permite importar perfis a partir de ficheiros g-code."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Gere as ligações de rede com as impressoras em rede Ultimaker."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Leitor de perfis G-code"
+msgid "Ultimaker Network Connection"
+msgstr "Ligação de rede Ultimaker"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Fornece uma fase de pré-visualização no Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Verifica potenciais problemas de impressão nos modelos e definições de impressão, e oferece sugestões."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Fase de pré-visualização"
+msgid "Model Checker"
+msgstr "Verificador de Modelos"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Permite a visualização em Raio-X."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+# rever!
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Vista Raio-X"
+msgid "Simulation View"
+msgstr "Visualização por camadas"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Fornece a hiperligação para o back-end de seccionamento do CuraEngine."
+msgid "Writes g-code to a file."
+msgstr "Grava o g-code num ficheiro."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Back-end do CuraEngine"
+msgid "G-code Writer"
+msgstr "Gravador de G-code"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Fornece suporte para ler ficheiros AMF."
+msgid "Provides support for writing 3MF files."
+msgstr "Possiblita a gravação de ficheiros 3MF."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Leitor de AMF"
+msgid "3MF Writer"
+msgstr "Gravador 3MF"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6151,178 +6145,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Leitor de G-code comprimido"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Extensão que permite a utilização de scripts criados pelo utilizador para efeitos de pós-processamento"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Fornece capacidades para ler e gravar perfis de material com base em XML."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Pós-Processamento"
+msgid "Material Profiles"
+msgstr "Perfis de Materiais"
 
-# rever!
-# Fornece suporte para exportar perfis Cura.
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Possibilita a exportação de perfis do Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Fornece a hiperligação para o back-end de seccionamento do CuraEngine."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Gravador de perfis Cura"
+msgid "CuraEngine Backend"
+msgstr "Back-end do CuraEngine"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Aceita G-Codes e envia-os para uma impressora. O plug-in também pode atualizar firmware."
+msgid "Provides support for reading X3D files."
+msgstr "Fornece suporte para ler ficheiros X3D."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Impressão USB"
+msgid "X3D Reader"
+msgstr "Leitor de X3D"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Fornece uma fase de preparação no Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Permite gerar geometria imprimível a partir de ficheiros de imagem 2D."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Fase de preparação"
+msgid "Image Reader"
+msgstr "Leitor de imagens"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Permite abrir e visualizar ficheiros G-code."
+msgid "Provides support for reading 3MF files."
+msgstr "Fornece suporte para ler ficheiros 3MF."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Leitor de G-code"
+msgid "3MF Reader"
+msgstr "Leitor de 3MF"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Permite gerar geometria imprimível a partir de ficheiros de imagem 2D."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Permite a gravação de arquivos Ultimaker Format."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Leitor de imagens"
+msgid "UFP Writer"
+msgstr "Gravador de UFP"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Disponibiliza funções especificas para as máquinas Ultimaker (tais como, o assistente de nivelamento da base, seleção de atualizações, etc.)."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Permite importar perfis de versões antigas do Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Funções para impressoras Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Leitor de perfis antigos do Cura"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Grava o g-code num arquivo comprimido."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Configurações de atualizações do Cura 4.3 para o Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Gravador de G-code comprimido"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Atualização da versão 4.3 para 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Procura e verifica se existem atualizações de firmware."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Atualiza as configurações do Cura 2.1 para o Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Verificador Atualizações Firmware"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Atualização da versão 2.1 para 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Envia informações anónimas sobre o seccionamento. Pode ser desativado nas preferências."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Atualiza as configurações do Cura 4.1 para o Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informações do seccionamento"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Atualização da versão 4.1 para 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Fornece capacidades para ler e gravar perfis de material com base em XML."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Perfis de Materiais"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Liga à Biblioteca Digital, permitindo ao Cura abrir ficheiros da Biblioteca Digital e guardar ficheiros na mesma."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Atualiza as configurações do Cura 4.5 para o Cura 4.6."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Biblioteca Digital Ultimaker"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Atualização da versão 4.5 para a versão 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Encontre, organize e instale novos pacotes para o Cura."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Atualiza as configurações do Cura 3.3 para o Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Toolbox"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Atualização da versão 3.3 para 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Grava o g-code num ficheiro."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Atualiza as configurações do Cura 4.8 para o Cura 4.9."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Gravador de G-code"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "Atualização da versão 4.8 para 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Permite a visualização por camadas."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Atualiza as configurações do Cura 2.7 para o Cura 3.0."
 
-# rever!
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Visualização por camadas"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Atualização da versão 2.7 para 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Atualiza as configurações do Cura 4.5 para o Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Atualiza as configurações do Cura 4.4 para o Cura 4.5."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Atualização da versão 4.5 para a versão 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Atualização da versão 4.4 para a versão 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Atualiza as configurações do Cura 2.5 para o Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Atualiza as configurações do Cura 3.0 para o Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Atualização da versão 2.5 para 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Atualização da versão 3.0 para 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6334,115 +6325,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "Atualização da versão 4.6.0 para a versão 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Atualiza as configurações do Cura 4.7 para o Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Atualiza as configurações do Cura 2.6 para o Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Atualização da versão 4.7 para 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Atualização da versão 2.6 para 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Atualiza as configurações do Cura 3.4 para o Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Atualiza as configurações do Cura 4.2 para o Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Atualização da versão 3.4 para 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Atualização da versão 4.2 para 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Atualiza as configurações do Cura 2.1 para o Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Atualiza as configurações do Cura 4.0 para o Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Atualização da versão 2.1 para 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Atualização da versão 4.0 para 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Atualiza as configurações do Cura 3.2 para o Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Atualiza as configurações do Cura 4.6.2 para o Cura 4.7."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Atualização da versão 3.2 para 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Atualização da versão 4.6.2 para a versão 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Atualiza as configurações do Cura 4.8 para o Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Atualiza as configurações do Cura 4.9 para o Cura 4.10."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "Atualização da versão 4.8 para 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "Atualização da versão 4.9 para 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Atualiza as configurações do Cura 4.6.2 para o Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Atualiza as configurações do Cura 2.2 para o Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Atualização da versão 4.6.2 para a versão 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Atualização da versão 2.2 para 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Atualiza as configurações do Cura 4.2 para o Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Atualiza as configurações do Cura 3.2 para o Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Atualização da versão 4.2 para 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Atualização da versão 3.2 para 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Configurações de atualizações do Cura 4.3 para o Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Atualiza as configurações do Cura 2.5 para o Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Atualização da versão 4.3 para 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Atualização da versão 2.5 para 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Atualiza as configurações do Cura 4.9 para o Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Atualiza as configurações do Cura 3.5 para o Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "Atualização da versão 4.9 para 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Atualização da versão 3.5 para 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Atualiza as configurações do Cura 2.7 para o Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Atualiza as configurações do Cura 3.4 para o Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Atualização da versão 2.7 para 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Atualização da versão 3.4 para 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Atualiza as configurações do Cura 2.6 para o Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Atualiza as configurações do Cura 4.7 para o Cura 4.8."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Atualização da versão 2.6 para 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Atualização da versão 4.7 para 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6454,105 +6445,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "Atualização da versão 4.11 para a versão 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Atualiza as configurações do Cura 3.3 para o Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Efetua uma cópia de segurança e repõe a sua configuração."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Atualização da versão 3.3 para 3.4"
+msgid "Cura Backups"
+msgstr "Cópias de segurança do Cura"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Atualiza as configurações do Cura 3.0 para o Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Fornece suporte para importar perfis Cura."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Atualização da versão 3.0 para 3.1"
+msgid "Cura Profile Reader"
+msgstr "Leitor de Perfis Cura"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Atualiza as configurações do Cura 4.0 para o Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Envia informações anónimas sobre o seccionamento. Pode ser desativado nas preferências."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Atualização da versão 4.0 para 4.1"
+msgid "Slice info"
+msgstr "Informações do seccionamento"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Atualiza as configurações do Cura 4.4 para o Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Permite importar perfis a partir de ficheiros g-code."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Atualização da versão 4.4 para a versão 4.5"
+msgid "G-code Profile Reader"
+msgstr "Leitor de perfis G-code"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Atualiza as configurações do Cura 2.2 para o Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "Grava o g-code num arquivo comprimido."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Atualização da versão 2.2 para 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Gravador de G-code comprimido"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Atualiza as configurações do Cura 4.1 para o Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Extensão que permite a utilização de scripts criados pelo utilizador para efeitos de pós-processamento"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Atualização da versão 4.1 para 4.2"
+msgid "Post Processing"
+msgstr "Pós-Processamento"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Atualiza as configurações do Cura 3.5 para o Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Cria um objecto usado para eliminar a impressão de suportes em certas zonas"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Atualização da versão 3.5 para 4.0"
+msgid "Support Eraser"
+msgstr "Eliminador de suportes"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Gere as ligações de rede com as impressoras em rede Ultimaker."
+msgid "Provides a preview stage in Cura."
+msgstr "Fornece uma fase de pré-visualização no Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ligação de rede Ultimaker"
+msgid "Preview Stage"
+msgstr "Fase de pré-visualização"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Fornece suporte para a leitura de ficheiros modelo."
+msgid "Provides the X-Ray view."
+msgstr "Permite a visualização em Raio-X."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Leitor de Trimesh"
+msgid "X-Ray View"
+msgstr "Vista Raio-X"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Fornece suporte para ler pacotes de formato Ultimaker."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Disponibiliza funções especificas para as máquinas Ultimaker (tais como, o assistente de nivelamento da base, seleção de atualizações, etc.)."
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Leitor de UFP"
+msgid "Ultimaker machine actions"
+msgstr "Funções para impressoras Ultimaker"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6564,35 +6565,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Vista Sólidos"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Possiblita a gravação de ficheiros 3MF."
+msgid "Allows loading and displaying G-code files."
+msgstr "Permite abrir e visualizar ficheiros G-code."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Gravador 3MF"
+msgid "G-code Reader"
+msgstr "Leitor de G-code"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Fornece uma fase de monitorização no Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Proporciona uma forma de alterar as definições da máquina (tal como o volume de construção, o tamanho do nozzle, etc.)."
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Fase de monitorização"
+msgid "Machine Settings Action"
+msgstr "Função Definições da Máquina"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Verifica potenciais problemas de impressão nos modelos e definições de impressão, e oferece sugestões."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Aceita G-Codes e envia-os para uma impressora. O plug-in também pode atualizar firmware."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Verificador de Modelos"
+msgid "USB printing"
+msgstr "Impressão USB"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Sincronizar materiais"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "É necessário reiniciar o {} para que as alterações tenham efeito."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "A sincronizar..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Foram detetadas alterações da sua conta Ultimaker"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "Pretende sincronizar o material e os pacotes de software com a sua conta?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Sincronizar"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Rejeitar e remover da conta"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "Falhou a transferência de {} plug-ins"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Contrato de licença do plug-in"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Converter imagem..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "A largura em milímetros na base de construção."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Mercado"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "É necessário reiniciar o Cura para que as alterações dos pacotes sejam aplicadas."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Instalar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Instalado"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Premium"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Ir para Mercado na Web"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Procurar materiais"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Compatibilidade"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Máquina"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Base de construção"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Suportes"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Qualidade"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Ficha técnica"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Ficha de segurança"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Instruções de impressão"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Site"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "É necessário <a href='%1'>Log in</a> para instalar ou atualizar"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>Comprar bobinas de material</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Atualizar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "A Actualizar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Atualizado"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Anterior"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Plug-ins"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Instalado"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Será instalado após reiniciar"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "É necessário <a href='%1'>Log in</a> para atualizar"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Repor Versão Anterior"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Desinstalar"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Contribuições comunitárias"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Plug-ins comunitários"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Materiais genéricos"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "A obter pacotes..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Site"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "E-mail"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Inicie sessão para obter plug-ins e materiais verificados para o Ultimaker Cura Enterprise"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Versão"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Actualizado em"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Transferências"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Plug-ins instalados"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "Não foi instalado qualquer plug-in."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Materiais instalados"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "Não foi instalado qualquer material."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Plug-ins em pacote"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Materiais em pacote"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Não foi possível aceder á base de dados de Pacotes do Cura. Por favor verifique a sua ligação."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "É necessário aceitar a licença para instalar o pacote"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Alterações feitas desde a sua conta"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Descartar"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "Os seguintes pacotes vão ser instalados:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "Os seguintes pacotes não podem ser instalados devido a uma versão incompatível do Cura:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Confirmar desinstalação"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Está a desinstalar materiais e/ou perfis que ainda estão a ser utilizados. Mediante confirmação, as predefinições dos seguintes materiais/perfis serão repostas."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Materiais"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Perfis"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Confirmar"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Alguns factores podem vir a ser problemáticos nesta impressão. Clique para ver algumas sugestões para melhorar a qualidade da impressão."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Biblioteca de apoio para processamento de objetos planos"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "Personalizou algumas definições de perfil.\n"
+#~ "Pretende manter estas definições alteradas depois de trocar de perfis?\n"
+#~ "Como alternativa, pode descartar as alterações para carregar as predefinições a partir de '%1'."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "&Base de construção"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Criar"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Duplicar"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Impressora: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Atualizar perfil com as definições/substituições atuais"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Tema:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "É necessário reiniciar a aplicação para que estas alterações sejam aplicadas."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Mais informações"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Criar"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Sincronizar com Impressoras"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Impressora"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Unidade"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Mostrar Guia de resolução de problemas online"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Use o Mercado para adicionar outros materiais"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Dispor todos os modelos em todas as bases de construção"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Mercado"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Encontre, organize e instale novos pacotes para o Cura."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Toolbox"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Permite a visualização por camadas."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/pt_PT/fdmextruder.def.json.po b/resources/i18n/pt_PT/fdmextruder.def.json.po
index d843296f89..fdca271293 100644
--- a/resources/i18n/pt_PT/fdmextruder.def.json.po
+++ b/resources/i18n/pt_PT/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 14:56+0200\n"
 "Last-Translator: Portuguese <info@bothof.nl>\n"
 "Language-Team: Paulo Miranda <av@utopica3d.com>, Portuguese <info@bothof.nl>\n"
diff --git a/resources/i18n/pt_PT/fdmprinter.def.json.po b/resources/i18n/pt_PT/fdmprinter.def.json.po
index 8f81248f64..9f86daa3d4 100644
--- a/resources/i18n/pt_PT/fdmprinter.def.json.po
+++ b/resources/i18n/pt_PT/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 14:56+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Portuguese <info@lionbridge.com>, Paulo Miranda <av@utopica3d.com>, Portuguese <info@bothof.nl>\n"
@@ -57,7 +57,9 @@ msgctxt "machine_start_gcode description"
 msgid ""
 "G-code commands to be executed at the very start - separated by \n"
 "."
-msgstr "Comandos G-code a serem executados no início – separados por \n."
+msgstr ""
+"Comandos G-code a serem executados no início – separados por \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
@@ -69,7 +71,9 @@ msgctxt "machine_end_gcode description"
 msgid ""
 "G-code commands to be executed at the very end - separated by \n"
 "."
-msgstr "Comandos G-code a serem executados no fim – separados por \n."
+msgstr ""
+"Comandos G-code a serem executados no fim – separados por \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "material_guid label"
@@ -467,8 +471,8 @@ msgstr "Polígono da cabeça e do ventilador da máquina"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "Uma silhueta 2D da cabeça de impressão (incluindo tampas do(s) ventilador(s))."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -746,6 +750,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "O diâmetro da roda que conduz o material pelo alimentador."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Qualidade"
@@ -975,6 +989,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "O número de paredes. Quando calculado através da espessura das paredes, este valor é arredondado para um número inteiro."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Distância Limpeza Parede Exterior"
@@ -1010,16 +1074,25 @@ msgctxt "optimize_wall_printing_order description"
 msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization. First layer is not optimized when choosing brim as build plate adhesion type."
 msgstr "Otimizar a ordem pela qual as paredes são impressas de forma a reduzir o número de retrações e a distância percorrida. A maioria das peças irá beneficiar com a ativação desta opção, mas algumas podem na realidade demorar mais tempo, portanto, por favor compare as estimativas do tempo de impressão com e sem a otimização."
 
-# antes das interiores?
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Paredes Exteriores Primeiro"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Quando ativado, imprime as paredes do exterior para o interior. Isto pode ajudar a melhorar a precisão dimensional em X e Y quando utilizar um plástico com alta viscosidade, como o ABS; no entanto, pode diminuir a qualidade de impressão da superfície exterior, especialmente em saliências."
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1034,96 +1107,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Imprimir uma parede adicional em camadas alternadas. Deste modo, o enchimento é \"capturado\" entre estas paredes adicionais, resultando em impressões mais robustas."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Compensar Sobreposição Paredes"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Compensar o fluxo em partes de uma parede a ser impressa, onde já exista uma parede."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Compensar Paredes Exteriores"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Compensar o fluxo em partes de uma parede exterior a ser impressa, onde já exista uma parede."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Compensar Paredes Interiores"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Compensar o fluxo em partes de uma parede interior a ser impressa, onde já exista uma parede."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Fluxo de parede mínimo"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Fluxo percentual mínimo permitido para uma linha de parede. A compensação de substituição de paredes reduz o fluxo de uma parede quando se situa junto a uma parede existente. As paredes cujo fluxo é inferior a este valor serão substituídas com um movimento de deslocação. Ao utilizar esta definição, deve ativar a compensação de sobreposição de paredes e imprimir a parede exterior antes das paredes interiores."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Preferir retração"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Se ativada, é utilizada retração em vez de combing para movimentos de deslocação que substituem paredes cujo fluxo está abaixo do limiar mínimo de fluxo."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Preencher Folgas Entre Paredes"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
-# rever!
-# onde nenhuma parede cabe
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Preencher as folgas entre as paredes onde não é possível criar paredes."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Em lado nenhum"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Imprimir Paredes Finas"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Em todo o lado"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Imprimir paredes do modelo que são mais finas horizontalmente do que o tamanho do nozzle."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Descartar Folgas Mínimas"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Descartar folgas muito pequenas, entre paredes, para reduzir \"blobs\" (borrões) no exterior da impressão."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Imprimir Paredes Finas"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Imprimir paredes do modelo que são mais finas horizontalmente do que o tamanho do nozzle."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -1783,10 +1844,7 @@ msgstr "Padrão de Enchimento"
 #: fdmprinter.def.json
 msgctxt "infill_pattern description"
 msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object."
-msgstr "O padrão do material de enchimento da impressão. A linha e o enchimento em ziguezague mudam de direção em camadas alternativas, o que reduz o custo do"
-" material. Os padrões de grelha, triângulo, tri-hexágono, cubo, octeto, quarto cúbico, cruz e concêntrico são totalmente impressos em cada camada. Os enchimentos"
-" gyroid, cúbico, quarto cúbico e octeto mudam em cada camada para proporcionar uma distribuição mais uniforme da resistência em cada direção. O enchimento"
-" relâmpago tenta minimizar o enchimento, ao suportar apenas a parte superior do objeto."
+msgstr "O padrão do material de enchimento da impressão. A linha e o enchimento em ziguezague mudam de direção em camadas alternativas, o que reduz o custo do material. Os padrões de grelha, triângulo, tri-hexágono, cubo, octeto, quarto cúbico, cruz e concêntrico são totalmente impressos em cada camada. Os enchimentos gyroid, cúbico, quarto cúbico e octeto mudam em cada camada para proporcionar uma distribuição mais uniforme da resistência em cada direção. O enchimento relâmpago tenta minimizar o enchimento, ao suportar apenas a parte superior do objeto."
 
 #: fdmprinter.def.json
 msgctxt "infill_pattern option grid"
@@ -2261,6 +2319,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Para compensar a redução do material quando arrefece, o modelo vai ser dimensionado com este fator."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Material Cristalino"
@@ -2785,24 +2863,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "As primeiras camadas são impressas mais lentamente do que o resto do modelo para obter uma melhor aderência à base de construção e melhorar a taxa de sucesso geral das impressões. A velocidade é aumentada gradualmente nessas camadas."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Equilibrar fluxo de filamento"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Imprime linhas mais finas do que o normal de forma mais rápida, para que a quantidade de material extrudido por segundo permaneça o mesmo. As peças finas do modelo podem requerer linhas impressas com uma menor espessura de linha do que a especificada nas definições. Esta definição controla as mudanças de velocidade dessas linhas."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Velocidade máxima para equilíbrio de fluxo"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "A velocidade máxima de impressão ao ajustar a velocidade de impressão para equilibrar o fluxo."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4591,6 +4659,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "O núcleo de extrusão utilizado para imprimir o Contorno/Aba/Raft. Definição usada com múltiplos extrusores."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Número Linhas Contorno"
@@ -4756,6 +4864,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "A distância entre linhas nas camadas superiores do raft. O espaçamento deve ser, igual ao Diâmetro da Linha, para que a superfície seja uniforme."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Espessura do Meio do Raft"
@@ -5275,6 +5393,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "O desvio máximo permitido ao reduzir a resolução da definição de Resolução máxima. Se aumentar esta definição, a impressão será menos precisa, mas o G-code será menor. O Desvio máximo é um limite para a Resolução máxima, pelo que, se estiverem em conflito, o Desvio máximo é sempre considerado verdadeiro."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Modos Especiais"
@@ -6587,6 +6715,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "Os elementos pequenos na primeira camada serão impressos a esta percentagem da respetiva velocidade de impressão normal. Uma impressão mais lenta pode ajudar em termos de aderência e precisão."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Definições de linha de comando"
@@ -6646,6 +6804,101 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matriz de transformação a ser aplicada ao modelo quando abrir o ficheiro."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "Uma silhueta 2D da cabeça de impressão (incluindo tampas do(s) ventilador(s))."
+
+# antes das interiores?
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Paredes Exteriores Primeiro"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Quando ativado, imprime as paredes do exterior para o interior. Isto pode ajudar a melhorar a precisão dimensional em X e Y quando utilizar um plástico com alta viscosidade, como o ABS; no entanto, pode diminuir a qualidade de impressão da superfície exterior, especialmente em saliências."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Compensar Sobreposição Paredes"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Compensar o fluxo em partes de uma parede a ser impressa, onde já exista uma parede."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Compensar Paredes Exteriores"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Compensar o fluxo em partes de uma parede exterior a ser impressa, onde já exista uma parede."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Compensar Paredes Interiores"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Compensar o fluxo em partes de uma parede interior a ser impressa, onde já exista uma parede."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Fluxo de parede mínimo"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Fluxo percentual mínimo permitido para uma linha de parede. A compensação de substituição de paredes reduz o fluxo de uma parede quando se situa junto a uma parede existente. As paredes cujo fluxo é inferior a este valor serão substituídas com um movimento de deslocação. Ao utilizar esta definição, deve ativar a compensação de sobreposição de paredes e imprimir a parede exterior antes das paredes interiores."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Preferir retração"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Se ativada, é utilizada retração em vez de combing para movimentos de deslocação que substituem paredes cujo fluxo está abaixo do limiar mínimo de fluxo."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Preencher Folgas Entre Paredes"
+
+# rever!
+# onde nenhuma parede cabe
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Preencher as folgas entre as paredes onde não é possível criar paredes."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Em lado nenhum"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Em todo o lado"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Descartar Folgas Mínimas"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Descartar folgas muito pequenas, entre paredes, para reduzir \"blobs\" (borrões) no exterior da impressão."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Equilibrar fluxo de filamento"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Imprime linhas mais finas do que o normal de forma mais rápida, para que a quantidade de material extrudido por segundo permaneça o mesmo. As peças finas do modelo podem requerer linhas impressas com uma menor espessura de linha do que a especificada nas definições. Esta definição controla as mudanças de velocidade dessas linhas."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Velocidade máxima para equilíbrio de fluxo"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "A velocidade máxima de impressão ao ajustar a velocidade de impressão para equilibrar o fluxo."
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "Comandos G-code a serem executados no início – separados por \\n."
diff --git a/resources/i18n/ru_RU/cura.po b/resources/i18n/ru_RU/cura.po
index 858f640f24..9d99bc412d 100644
--- a/resources/i18n/ru_RU/cura.po
+++ b/resources/i18n/ru_RU/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2022-01-10 12:09+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Russian <info@lionbridge.com>, Ruslan Popov <ruslan.popov@gmail.com>, Russian <info@bothof.nl>\n"
@@ -17,1428 +17,276 @@ msgstr ""
 "X-Generator: Poedit 2.3\n"
 "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Не удалось создать архив из каталога с данными пользователя: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122 /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Резервное копирование"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Попытка восстановить резервную копию Cura при отсутствии необходимых данных или метаданных."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Выполнена попытка восстановить резервную копию Cura с более поздней версией, чем текущая."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "При попытке восстановить резервную копию Cura произошла следующая ошибка:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Перед началом печати синхронизируйте профили материалов с принтерами."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Установлены новые материалы"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Синхронизация материалов"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "Узнать больше"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "Невозможно сохранить архив материалов в {}:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Архив материалов не сохранен"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Неизвестная ошибка."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Высота печатаемого объёма была уменьшена до значения параметра \"Последовательность печати\", чтобы предотвратить касание портала за напечатанные детали."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Объём печати"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Действительно удалить {0}? Это действие невозможно будет отменить!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Не переопределен"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Неизвестно"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Перечисленные ниже принтеры невозможно подключить, поскольку они входят в состав группы"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Доступные сетевые принтеры"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Подготовка"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Профиль Cura"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Собственные профили"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Все поддерживаемые типы ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Все файлы (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Визуальный"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Визуальный профиль предназначен для печати визуальных прототипов и моделей, для которых требуется высокое качество поверхности и внешнего вида."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Инженерный профиль предназначен для печати функциональных прототипов и готовых деталей, для которых требуется высокая точность и малые допуски."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Черновой"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Черновой профиль предназначен для печати начальных прототипов и проверки концепции, где приоритетом является скорость печати."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Собственный материал"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289 /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Своё"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Вход не выполнен"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Поиск места для новых объектов"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Поиск места"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Невозможно разместить все объекты внутри печатаемого объёма"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Не могу найти место"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Архив материалов для синхронизации с принтерами не создан."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Архив материалов для синхронизации с принтерами не загружен."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "Ответ от Digital Factory поврежден."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "В ответе от Digital Factory отсутствует важная информация."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Подключение к Digital Factory для синхронизации материалов с некоторыми принтерами не установлено."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Подключение к Digital Factory не установлено."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Загрузка принтеров..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Настройка параметров..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Инициализация активной машины..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Инициализация диспетчера машин..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Инициализация объема печати..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Настройка сцены..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Загрузка интерфейса..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Инициализация ядра..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f мм"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Только один G-code файла может быть загружен в момент времени. Пропускаю импортирование {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809 /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Внимание"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Невозможно открыть любой другой файл, если G-code файл уже загружен. Пропускаю импортирование {0}"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Ошибка"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Пропустить"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72 /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Закрыть"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Следующий"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290 /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Завершить"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Добавить"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Отмена"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Группа #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Внешняя стенка"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Внутренние стенки"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Покрытие"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Заполнение"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Заполнение поддержек"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Связующий слой поддержек"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Поддержки"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Юбка"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Черновая башня"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Перемещение"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Откаты"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Другое"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37 /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "Невозможно открыть примечания к версии."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Не удалось запустить Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>В ПО Ultimaker Cura обнаружена ошибка.</p></b>\n"
-"                    <p>Во время запуска обнаружена неустранимая ошибка. Возможно, она вызвана некоторыми файлами конфигурации с неправильными данными. Рекомендуется создать резервную копию конфигурации и сбросить ее.</p>\n"
-"                    <p>Резервные копии хранятся в папке конфигурации.</p>\n"
-"                    <p>Отправьте нам этот отчет о сбое для устранения проблемы.</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Отправить отчет о сбое в Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Показать подробный отчет о сбое"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Показать конфигурационный каталог"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Резервное копирование и сброс конфигурации"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Отчёт о сбое"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>В Cura возникла критическая ошибка. Отправьте нам этот отчет о сбое для устранения проблемы</p></b>\n"
-"            <p>Нажмите кнопку «Отправить отчет», чтобы автоматически опубликовать отчет об ошибке на наших серверах</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Информация о системе"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Неизвестно"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Версия Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Язык Cura"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "Язык ОС"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Платформа"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Версия Qt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "Версия PyQt"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Еще не инициализировано<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>Версия OpenGL: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>Поставщик OpenGL: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>Средство визуализации OpenGL: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Обратное отслеживание ошибки"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Журналы"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Отправить отчёт"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Невозможно начать новый вход в систему. Проверьте, возможно другой сеанс еще не завершен."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Нет связи с сервером учетных записей Ultimaker."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "Вход в систему не выполнен"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "Указано неверное состояние."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Истекло время аутентификации на сервере учетной записи."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Дайте необходимые разрешения при авторизации в этом приложении."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Возникла непредвиденная ошибка при попытке входа в систему. Повторите попытку."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Не удалось прочитать ответ."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Размножение и размещение объектов"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Размещение объектов"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Размещение объекта"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Не поддерживается"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Сопло"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Настройки изменены в соответствии с текущей доступностью экструдеров:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Настройки обновлены"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Экструдер (-ы) отключен (-ы)"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Файл уже существует"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Файл <filename>{0}</filename> уже существует. Вы уверены, что желаете перезаписать его?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459 /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "Неправильный URL-адрес файла:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Невозможно экспортировать профиль в <filename>{0}</filename>: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Невозможно экспортировать профиль в <filename>{0}</filename>: Плагин записи уведомил об ошибке."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Экспортирование профиля в <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Экспорт успешно завершен"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Не удалось импортировать профиль из <filename>{0}</filename>: {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Невозможно импортировать профиль из <filename>{0}</filename>, пока не добавлен принтер."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Отсутствует собственный профиль для импорта в файл <filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Не удалось импортировать профиль из <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Данный профиль <filename>{0}</filename> содержит неверные данные, поэтому его невозможно импортировать."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Не удалось импортировать профиль из <filename>{0}</filename>:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "Профиль {0} успешно импортирован."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "В файле {0} нет подходящих профилей."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Профиль {0} имеет неизвестный тип файла или повреждён."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Собственный профиль"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "У профайла отсутствует тип качества."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Еще нет активных принтеров."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "Невозможно добавить профиль."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "Тип качества \"{0}\" несовместим с текущим определением активной машины \"{1}\"."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Внимание! Профиль не отображается, так как его тип качества \"{0}\" недоступен для текущей конфигурации. Выберите комбинацию материала и сопла, которым подходит этот тип качества."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Параметры модели"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Правка параметров модели"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Профиль Cura"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Файл X3D"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "При попытке восстановления данных из резервной копии возникла ошибка."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Резервные копии"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "При заливке вашей резервной копии возникла ошибка."
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Создание резервной копии..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "При создании резервной копии возникла ошибка."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Не могу получить информацию об обновлениях."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Выполняется заливка вашей резервной копии..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Для {machine_name} доступны новые функции или исправления! Если у вас не установлена самая последняя версия прошивки принтера, рекомендуем обновить ее до версии {latest_version}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Заливка вашей резервной копии завершена."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "Доступна новая стабильная прошивка %s"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Размер файла резервной копии превышает максимально допустимый."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Порядок обновления"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Управление резервными копиями"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Параметры принтера"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Блокировщик поддержки"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Создание объема без печати элементов поддержки."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Внешний носитель"
+msgid "Monitor"
+msgstr "Монитор"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Сохранить на внешний носитель"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Сохранить на внешний носитель {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Ни один из форматов файлов не доступен для записи!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Сохранение на внешний носитель <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Сохранение"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Не могу записать <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Не могу найти имя файла при записи в {device}."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Невозможно сохранить на внешний носитель {0}: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Ошибка"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Сохранено на внешний носитель {0} как {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Файл сохранён"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Извлечь"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Извлекает внешний носитель {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Извлечено {0}. Вы можете теперь безопасно извлечь носитель."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Безопасное извлечение устройства"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Невозможно извлечь {0}. Другая программа может использовать это устройство."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Обновить прошивку"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Профили Cura 15.04"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Рекомендованная"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Своя"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Файл проекта <filename>{0}</filename> содержит неизвестный тип принтера <message>{1}</message>. Не удалось импортировать принтер. Вместо этого будут импортированы модели."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Открыть файл проекта"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Файл проекта <filename>{0}</filename> внезапно стал недоступен: <message>{1}.</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Невозможно открыть файл проекта"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "Файл проекта <filename>{0}</filename> поврежден: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Файл проекта <filename>{0}</filename> создан с использованием профилей, несовместимых с данной версией Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27 /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Файл 3MF"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Невозможно записать в файл UFP:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28 /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Пакет формата Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Файл G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Предварительный просмотр"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Просмотр в рентгене"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Обработка слоёв"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "Информация"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "Нарезка на слои не выполнена из-за непредвиденной ошибки. Возможно, стоит сообщить об ошибке в нашей системе отслеживания проблем."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "Нарезка на слои не выполнена"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Сообщить об ошибке"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Сообщите об ошибке в системе отслеживания проблем Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Невозможно нарезать модель, используя текущий материал, так как он несовместим с выбранной машиной или конфигурацией."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Невозможно нарезать"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Не могу выполнить слайсинг на текущих настройках. Проверьте следующие настройки: {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Не удалось выполнить слайсинг из-за настроек модели. Следующие настройки ошибочны для одной или нескольких моделей: {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Слайсинг невозможен, так как черновая башня или её позиция неверные."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Невозможно разделить на слои из-за наличия объектов, связанных с отключенным экструдером %s."
+msgid "Warning"
+msgstr "Внимание"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Проверьте настройки и убедитесь в том, что ваши модели:\n"
-"- соответствуют допустимой области печати\n"
-"- назначены активированному экструдеру\n"
-"- не заданы как объекты-модификаторы"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Внешний носитель"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "Файл AMF"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17 /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Сжатый файл с G-кодом"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Пост-обработка"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Изменить G-код"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Печать через USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Печатать через USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Печатать через USB"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Подключено через USB"
+msgid "Ultimaker Format Package"
+msgstr "Пакет формата Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Выполняется печать через USB, закрытие Cura остановит эту печать. Вы уверены?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Печать еще выполняется. Cura не может начать другую печать через USB, пока предыдущая печать не будет завершена."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Идет печать"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Подготовка"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Обработка G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Параметры G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Перед отправкой G-code на принтер удостоверьтесь в его соответствии вашему принтеру и его настройкам. Возможны неточности в G-code."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Файл G"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG изображение"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG изображение"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG изображение"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP изображение"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF изображение"
+msgid "Per Model Settings"
+msgstr "Параметры модели"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Выравнивание стола"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Правка параметров модели"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Выбор обновлений"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "Средство записи G-кода с расширением GZ (GCodeGzWriter) не поддерживает текстовый режим."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Не могу получить информацию об обновлениях."
+msgid "Update Firmware"
+msgstr "Обновить прошивку"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Для {machine_name} доступны новые функции или исправления! Если у вас не установлена самая последняя версия прошивки принтера, рекомендуем обновить ее до версии {latest_version}."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "Доступна новая стабильная прошивка %s"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Порядок обновления"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "Невозможно прочитать пример файла данных."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "Для активации изменений вам потребуется завершить работу программного обеспечения {} и перезапустить его."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Синхронизация..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95 /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "В вашей учетной записи Ultimaker обнаружены изменения"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Хотите синхронизировать пакеты материалов и программного обеспечения со своей учетной записью?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Синхронизация"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Отклонить и удалить из учетной записи"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Встраиваемые модули ({} шт.) не загружены"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Отклонить"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Принимаю"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Лицензионное соглашение плагина"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "Средство записи G-кода (GCodeWriter) не поддерживает нетекстовый режим."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Подготовьте G-код перед экспортом."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "При печати через кабель Cura отображает слои неточно."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura обнаружены профили материалов, которые пока не установлены в главном принтере группы {0}."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Вид моделирования"
+msgid "Sending materials to printer"
+msgstr "Отправка материалов на принтер"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Ничего не отображается, поскольку сначала нужно выполнить нарезку на слои."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Вы пытаетесь подключиться к {0}, но это не главный принтер группы. Откройте веб-страницу, чтобы настроить его в качестве главного принтера группы."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Нет слоев для отображения"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Больше не показывать это сообщение"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Просмотр слоёв"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Печать через сеть"
+msgid "Not a group host"
+msgstr "Не главный принтер группы"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Печать через сеть"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Настроить группу"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Подключен по сети"
+msgid "Sending Print Job"
+msgstr "Отправка задания печати"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "завтра"
+msgid "Uploading print job to printer."
+msgstr "Загрузка задания печати в принтер."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "сегодня"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "Очередь заданий печати заполнена. Принтер не может принять новое задание."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Подключиться через сеть"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "Очередь заполнена"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Дождитесь окончания отправки текущего задания."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Ошибка печати"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Задание печати успешно отправлено на принтер."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Данные отправлены"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Вы пытаетесь подключиться к принтеру, на котором не работает Ultimaker Connect. Обновите прошивку принтера до последней версии."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Обновите свой принтер"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "Очередь заданий печати заполнена. Принтер не может принять новое задание."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "Очередь заполнена"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Отправка задания печати"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Загрузка задания печати в принтер."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura обнаружены профили материалов, которые пока не установлены в главном принтере группы {0}."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Отправка материалов на принтер"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Облако не залило данные на принтер."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Ошибка сети"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Вы пытаетесь подключиться к {0}, но это не главный принтер группы. Откройте веб-страницу, чтобы настроить его в качестве главного принтера группы."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Не главный принтер группы"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Настроить группу"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1448,53 +296,72 @@ msgstr ""
 "Ваш принтер <b>{printer_name}</b> может быть подключен через облако.\n"
 " Управляйте очередью печати и следите за результатом из любого места благодаря подключению принтера к Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "Вы готовы к облачной печати?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Приступить"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "Узнать больше"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Печать через облако"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Вы пытаетесь подключиться к принтеру, на котором не работает Ultimaker Connect. Обновите прошивку принтера до последней версии."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Обновите свой принтер"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Облако не залило данные на принтер."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Ошибка сети"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Печать через сеть"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Печать через облако"
+msgid "Print over network"
+msgstr "Печать через сеть"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Подключено через облако"
+msgid "Connected over the network"
+msgstr "Подключен по сети"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Мониторинг печати"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "завтра"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Отслеживайте печать в Ultimaker Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "сегодня"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Неизвестный код ошибки при загрузке задания печати: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Подключиться через сеть"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
@@ -1502,13 +369,13 @@ msgstr[0] "Новый принтер обнаружен из учетной за
 msgstr[1] "Новых принтера обнаружено из учетной записи Ultimaker"
 msgstr[2] "Новых принтеров обнаружено из учетной записи Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Добавление принтера {name} ({model}) из вашей учетной записи"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1517,12 +384,12 @@ msgstr[0] "... и еще {0} другой"
 msgstr[1] "... и еще {0} других"
 msgstr[2] "... и еще {0} других"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Принтеры, добавленные из Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
@@ -1530,7 +397,7 @@ msgstr[0] "Подключение к облаку недоступно для п
 msgstr[1] "Подключение к облаку недоступно для некоторых принтеров"
 msgstr[2] "Подключение к облаку недоступно для некоторых принтеров"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
@@ -1538,51 +405,52 @@ msgstr[0] "Это принтер не подключен Digital Factory:"
 msgstr[1] "Эти принтеры не подключены Digital Factory:"
 msgstr[2] "Эти принтеры не подключены Digital Factory:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Чтобы установить подключение, перейдите на сайт {website_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Сохранить конфигурации принтера"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Удалить принтеры"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} будет удален до следующей синхронизации учетной записи."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Чтобы удалить {printer_name} без возможности восстановления, перейдите на сайт {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Действительно удалить {printer_name} временно?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Удалить принтеры?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1601,1337 +469,1613 @@ msgstr[2] ""
 "Вы удаляете {0} принтеров из Cura. Это действие невозможно будет отменить.\n"
 "Продолжить?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr "Вы удаляете все принтеры из Cura. Это действие невозможно будет отменить.Продолжить?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Печать через облако"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Печать через облако"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Подключено через облако"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Мониторинг печати"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Отслеживайте печать в Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Неизвестный код ошибки при загрузке задания печати: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Помощник по 3D-моделям"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "Выделены области с отсутствующими или лишними поверхностями. Исправьте модель и снова откройте ее в Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Одна или несколько 3D-моделей могут не напечататься оптимальным образом из-за размера модели и конфигурации материала:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Узнайте, как обеспечить максимально возможное качество и высокую надежность печати.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ознакомиться с руководством по качеству печати</a></p>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "При печати через кабель Cura отображает слои неточно."
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Ошибки модели"
+msgid "Simulation View"
+msgstr "Вид моделирования"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Просмотр модели"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Ничего не отображается, поскольку сначала нужно выполнить нарезку на слои."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Нет слоев для отображения"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Больше не показывать это сообщение"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Просмотр слоёв"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "Средство записи G-кода (GCodeWriter) не поддерживает нетекстовый режим."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Подготовьте G-код перед экспортом."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Файл G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Ошибка в ходе записи файла 3MF."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "Подключаемый модуль для записи 3MF поврежден."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Нет рабочей среды для записи. Сначала добавьте принтер."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Права на запись рабочей среды отсутствуют."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "Операционная система не позволяет сохранять файл проекта в этом каталоге или с этим именем файла."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "3MF файл"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "3MF файл проекта Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Монитор"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Сжатый файл с G-кодом"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "Нарезка на слои не выполнена из-за непредвиденной ошибки. Возможно, стоит сообщить об ошибке в нашей системе отслеживания проблем."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "Нарезка на слои не выполнена"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Сообщить об ошибке"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Сообщите об ошибке в системе отслеживания проблем Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Невозможно нарезать модель, используя текущий материал, так как он несовместим с выбранной машиной или конфигурацией."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Помощник по 3D-моделям"
+msgid "Unable to slice"
+msgstr "Невозможно нарезать"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Не могу выполнить слайсинг на текущих настройках. Проверьте следующие настройки: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Не удалось выполнить слайсинг из-за настроек модели. Следующие настройки ошибочны для одной или нескольких моделей: {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Слайсинг невозможен, так как черновая башня или её позиция неверные."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Невозможно разделить на слои из-за наличия объектов, связанных с отключенным экструдером %s."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>Одна или несколько 3D-моделей могут не напечататься оптимальным образом из-за размера модели и конфигурации материала:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Узнайте, как обеспечить максимально возможное качество и высокую надежность печати.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ознакомиться с руководством по качеству печати</a></p>"
+"Проверьте настройки и убедитесь в том, что ваши модели:\n"
+"- соответствуют допустимой области печати\n"
+"- назначены активированному экструдеру\n"
+"- не заданы как объекты-модификаторы"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Тип объекта"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Обработка слоёв"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Нормальная модель"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Информация"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Печать в качестве поддержки"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Файл X3D"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Изменить настройки для перекрытий"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG изображение"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Не поддерживать перекрытия"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG изображение"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Заполнение объекта"
+msgid "PNG Image"
+msgstr "PNG изображение"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Ограничивающий объект"
+msgid "BMP Image"
+msgstr "BMP изображение"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Выберите параметры"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF изображение"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Выберите параметр для изменения этой модели"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Сопло"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Фильтр..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Файл проекта <filename>{0}</filename> содержит неизвестный тип принтера <message>{1}</message>. Не удалось импортировать принтер. Вместо этого будут импортированы модели."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Показать всё"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Открыть файл проекта"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Резервные копии Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Файл проекта <filename>{0}</filename> внезапно стал недоступен: <message>{1}.</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Версия Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Невозможно открыть файл проекта"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Принтеры"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "Файл проекта <filename>{0}</filename> поврежден: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Материалы"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Файл проекта <filename>{0}</filename> создан с использованием профилей, несовместимых с данной версией Ultimaker Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Профили"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Рекомендованная"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Плагины"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Своя"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Желаете большего?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "Файл 3MF"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Создать резервную копию"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Невозможно записать в файл UFP:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Автоматическое резервное копирование"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Профили Cura 15.04"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Автоматически создавать резервную копию в день запуска Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Резервные копии"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Восстановить"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "При заливке вашей резервной копии возникла ошибка."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Удалить резервную копию"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Создание резервной копии..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Вы уверены, что хотите удалить указанную резервную копию? Данное действие невозможно отменить."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "При создании резервной копии возникла ошибка."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Восстановить резервную копию"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Выполняется заливка вашей резервной копии..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Вам потребуется перезапустить Cura, прежде чем данные будут восстановлены из резервной копии. Вы действительно хотите закрыть Cura прямо сейчас?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Заливка вашей резервной копии завершена."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Резервное копирование и синхронизация ваших параметров Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Размер файла резервной копии превышает максимально допустимый."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Войти"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Управление резервными копиями"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Мои резервные копии"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Резервное копирование"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "В данный момент у вас отсутствуют резервные копии. Для создания резервной копии нажмите кнопку «Создать резервную копию»."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "При попытке восстановления данных из резервной копии возникла ошибка."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "На этапе предварительного просмотра отображается только 5 резервных копий. Для просмотра предыдущих резервных копий удалите одну копию."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "Невозможно прочитать пример файла данных."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Параметры принтера"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "Средство записи G-кода с расширением GZ (GCodeGzWriter) не поддерживает текстовый режим."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Ширина)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Пост-обработка"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "мм"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Изменить G-код"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Глубина)"
+msgid "Support Blocker"
+msgstr "Блокировщик поддержки"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Высота)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Создание объема без печати элементов поддержки."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Форма стола"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Предварительный просмотр"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Начало координат в центре"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Просмотр в рентгене"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Нагреваемый стол"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Выравнивание стола"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Подогреваемый объем печати"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Выбор обновлений"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Вариант G-кода"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Параметры головы"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X минимум"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y минимум"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X максимум"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y максимум"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Высота портала"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Количество экструдеров"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Применить смещения экструдера к GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "Выделены области с отсутствующими или лишними поверхностями. Исправьте модель и снова откройте ее в Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Стартовый G-код"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Ошибки модели"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Завершающий G-код"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "Узнать больше"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Параметры сопла"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Просмотр модели"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Диаметр сопла"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Обработка G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Диаметр совместимого материала"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Параметры G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Смещение сопла по оси X"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Перед отправкой G-code на принтер удостоверьтесь в его соответствии вашему принтеру и его настройкам. Возможны неточности в G-code."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Смещение сопла по оси Y"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Файл G"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Номер охлаждающего вентилятора"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Параметры принтера"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Стартовый G-код экструдера"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Печать через USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Завершающий G-код экструдера"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Печатать через USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Принтер"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Печатать через USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Обновить прошивку"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Подключено через USB"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "Прошивка является программным обеспечением, которое работает на плате вашего 3D принтера. Прошивка управляет шаговыми моторами, регулирует температуру и, в конечном счёте, обеспечивает работу вашего принтера."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Выполняется печать через USB, закрытие Cura остановит эту печать. Вы уверены?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Печать еще выполняется. Cura не может начать другую печать через USB, пока предыдущая печать не будет завершена."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Идет печать"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Загрузка принтеров..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Настройка параметров..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Инициализация активной машины..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Инициализация диспетчера машин..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Инициализация объема печати..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Настройка сцены..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Загрузка интерфейса..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Инициализация ядра..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f мм"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Только один G-code файла может быть загружен в момент времени. Пропускаю импортирование {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Невозможно открыть любой другой файл, если G-code файл уже загружен. Пропускаю импортирование {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "Поставляемая с новыми принтерами прошивка работоспособна, но обновления предоставляют больше возможностей и усовершенствований."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Автоматическое обновление прошивки"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Визуальный"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Залить собственную прошивку"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Визуальный профиль предназначен для печати визуальных прототипов и моделей, для которых требуется высокое качество поверхности и внешнего вида."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "Невозможно обновить прошивку, так как нет подключения к принтеру."
+msgid "Engineering"
+msgstr "Engineering"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Инженерный профиль предназначен для печати функциональных прототипов и готовых деталей, для которых требуется высокая точность и малые допуски."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "Невозможно обновить прошивку, так как подключение к принтеру не поддерживает функцию обновления прошивки."
+msgid "Draft"
+msgstr "Черновой"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Выбрать собственную прошивку"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Черновой профиль предназначен для печати начальных прототипов и проверки концепции, где приоритетом является скорость печати."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Обновление прошивки"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Не переопределен"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Действительно удалить {0}? Это действие невозможно будет отменить!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Обновление прошивки."
+msgid "Unknown"
+msgstr "Неизвестно"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Обновление прошивки завершено."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Перечисленные ниже принтеры невозможно подключить, поскольку они входят в состав группы"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Обновление прошивки не удалось из-за неизвестной ошибки."
+msgid "Available networked printers"
+msgstr "Доступные сетевые принтеры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Вычислено"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Перед началом печати синхронизируйте профили материалов с принтерами."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Установлены новые материалы"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Обновление прошивки не удалось из-за ошибки связи."
+msgid "Custom Material"
+msgstr "Собственный материал"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Обновление прошивки не удалось из-за ошибки ввода-вывода."
+msgid "Custom"
+msgstr "Своё"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Обновление прошивки не удалось из-за её отсутствия."
+msgid "Custom profiles"
+msgstr "Собственные профили"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Открытие проекта"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Все поддерживаемые типы ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Обновить существующий"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Все файлы (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Создать новый"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Архив материалов для синхронизации с принтерами не создан."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Сводка - Проект Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Архив материалов для синхронизации с принтерами не загружен."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Параметры принтера"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "Ответ от Digital Factory поврежден."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Как следует решать конфликт в принтере?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "В ответе от Digital Factory отсутствует важная информация."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Тип"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Подключение к Digital Factory для синхронизации материалов с некоторыми принтерами не установлено."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Группа принтеров"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Подключение к Digital Factory не установлено."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Параметры профиля"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Не удалось создать архив из каталога с данными пользователя: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Как следует решать конфликт в профиле?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Попытка восстановить резервную копию Cura при отсутствии необходимых данных или метаданных."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Название"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Выполнена попытка восстановить резервную копию Cura с более поздней версией, чем текущая."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "При попытке восстановить резервную копию Cura произошла следующая ошибка:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Вне профиля"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Поиск места для новых объектов"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 перекрыт"
-msgstr[1] "%1 перекрыто"
-msgstr[2] "%1 перекрыто"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Поиск места"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Производное от"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Невозможно разместить все объекты внутри печатаемого объёма"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 перекрыто"
-msgstr[1] "%1, %2 перекрыто"
-msgstr[2] "%1, %2 перекрыто"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Не могу найти место"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Параметры материала"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Вход не выполнен"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Как следует решать конфликт в материале?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Внешняя стенка"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Видимость параметров"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Внутренние стенки"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Режим"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Покрытие"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Видимые параметры:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Заполнение"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 из %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Заполнение поддержек"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Загрузка проекта приведет к удалению всех моделей на рабочем столе."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Связующий слой поддержек"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Открыть"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Поддержки"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Плагин пост-обработки"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Юбка"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Скрипты пост-обработки"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Черновая башня"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Добавить скрипт"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Перемещение"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Откаты"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Другое"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Параметры"
+msgid "Group #{group_nr}"
+msgstr "Группа #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Измените активные скрипты пост-обработки."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "Невозможно открыть примечания к версии."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "Активны следующие скрипты:"
-msgstr[1] "Активны следующие скрипты:"
-msgstr[2] "Активны следующие скрипты:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Пропустить"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Преобразование изображения..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Закрыть"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Максимальная дистанция каждого пикселя от \"Основания.\""
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Добавить"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Высота (мм)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Завершить"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Высота основания от стола в миллиметрах."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Отмена"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Основание (мм)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Следующий"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Ширина в миллиметрах на столе."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Высота печатаемого объёма была уменьшена до значения параметра \"Последовательность печати\", чтобы предотвратить касание портала за напечатанные детали."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Ширина (мм)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Объём печати"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Глубина в миллиметрах на столе"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "Невозможно сохранить архив материалов в {}:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Глубина (мм)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Архив материалов не сохранен"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Для литофании темные пиксели должны соответствовать более толстым частям, чтобы сильнее задерживать проходящий свет. Для схем высот более светлые пиксели обозначают более высокий участок. Поэтому более светлые пиксели должны соответствовать более толстым местам в созданной 3D-модели."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Неизвестная ошибка."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Тёмные выше"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "Файл уже существует"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Светлые выше"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Файл <filename>{0}</filename> уже существует. Вы уверены, что желаете перезаписать его?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Для литофании предусмотрена простая логарифмическая модель светопроходимости. В картах высот значения пикселей линейно соответствуют высотам."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "Неправильный URL-адрес файла:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Линейный"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Не поддерживается"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Светопроходимость"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Процент света, проникающего в отпечаток толщиной 1 миллиметр. Если уменьшить это значение, контрастность в темных областях изображения увеличится, а в светлых — уменьшится."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Настройки изменены в соответствии с текущей доступностью экструдеров:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Проходимость через 1 мм (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Настройки обновлены"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Величина сглаживания для применения к изображению."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Экструдер (-ы) отключен (-ы)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Сглаживание"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Невозможно экспортировать профиль в <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Невозможно экспортировать профиль в <filename>{0}</filename>: Плагин записи уведомил об ошибке."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Пожалуйста, укажите любые изменения, внесённые в Ultimaker Original"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Экспортирование профиля в <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Нагреваемый стол (официальный набор или самодельный)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Экспорт успешно завершен"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Выравнивание стола"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Не удалось импортировать профиль из <filename>{0}</filename>: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Сейчас вы можете отрегулировать ваш стол, чтобы быть уверенным в качестве последующей печати. При нажатии на кнопку «Перейти к следующей позиции» сопло перейдёт на другую позиции, которую можно будет отрегулировать."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Невозможно импортировать профиль из <filename>{0}</filename>, пока не добавлен принтер."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Для каждой позиции, вставьте кусок бумаги под сопло и отрегулируйте высоту стола. Когда кончик сопла немного прижимает бумагу к столу, значит вы выставили правильную высоту стола."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Отсутствует собственный профиль для импорта в файл <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Начало выравнивания стола"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Не удалось импортировать профиль из <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Перейти к следующей позиции"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Данный профиль <filename>{0}</filename> содержит неверные данные, поэтому его невозможно импортировать."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Дополнительная информация о сборе анонимных данных"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Не удалось импортировать профиль из <filename>{0}</filename>:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura собирает анонимные данные для повышения качества печати и улучшения взаимодействия с пользователем. Ниже приведен пример всех передаваемых данных:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "Профиль {0} успешно импортирован."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Не хочу отправлять анонимные данные"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "В файле {0} нет подходящих профилей."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Разрешить отправку анонимных данных"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Профиль {0} имеет неизвестный тип файла или повреждён."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Магазин"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Собственный профиль"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Вам потребуется перезапустить Cura для активации изменений в пакетах."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "У профайла отсутствует тип качества."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Выйти из %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Еще нет активных принтеров."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Установить"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "Невозможно добавить профиль."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Установлено"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "Тип качества \"{0}\" несовместим с текущим определением активной машины \"{1}\"."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Премиум"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Внимание! Профиль не отображается, так как его тип качества \"{0}\" недоступен для текущей конфигурации. Выберите комбинацию материала и сопла, которым подходит этот тип качества."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Перейти в интернет-магазин"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Размножение и размещение объектов"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Поиск материалов"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Размещение объектов"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Совместимость"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Размещение объекта"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Принтер"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Невозможно начать новый вход в систему. Проверьте, возможно другой сеанс еще не завершен."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Рабочий стол"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Нет связи с сервером учетных записей Ultimaker."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Поддержки"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "Вход в систему не выполнен"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Качество"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Не удалось прочитать ответ."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Таблица технических характеристик"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "Указано неверное состояние."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Паспорт безопасности"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Истекло время аутентификации на сервере учетной записи."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Инструкции по печати"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Дайте необходимые разрешения при авторизации в этом приложении."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Веб-сайт"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Возникла непредвиденная ошибка при попытке входа в систему. Повторите попытку."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "Для выполнения установки или обновления необходимо <a href='%1'>войти</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Не удалось запустить Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Приобретение катушек с материалом</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>В ПО Ultimaker Cura обнаружена ошибка.</p></b>\n"
+"                    <p>Во время запуска обнаружена неустранимая ошибка. Возможно, она вызвана некоторыми файлами конфигурации с неправильными данными. Рекомендуется создать резервную копию конфигурации и сбросить ее.</p>\n"
+"                    <p>Резервные копии хранятся в папке конфигурации.</p>\n"
+"                    <p>Отправьте нам этот отчет о сбое для устранения проблемы.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Обновить"
+msgid "Send crash report to Ultimaker"
+msgstr "Отправить отчет о сбое в Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Обновление"
+msgid "Show detailed crash report"
+msgstr "Показать подробный отчет о сбое"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Обновлено"
+msgid "Show configuration folder"
+msgstr "Показать конфигурационный каталог"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Назад"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Плагины"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Материалы"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Установлено"
+msgid "Backup and Reset Configuration"
+msgstr "Резервное копирование и сброс конфигурации"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Установка выполнится при перезагрузке"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Отчёт о сбое"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "Для выполнения обновления необходимо <a href='%1'>войти</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>В Cura возникла критическая ошибка. Отправьте нам этот отчет о сбое для устранения проблемы</p></b>\n"
+"            <p>Нажмите кнопку «Отправить отчет», чтобы автоматически опубликовать отчет об ошибке на наших серверах</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Переход на более раннюю версию"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Информация о системе"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Удалить"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Неизвестно"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Вклад в развитие сообщества"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Версия Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Плагины сообщества"
+msgid "Cura language"
+msgstr "Язык Cura"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Универсальные материалы"
+msgid "OS language"
+msgstr "Язык ОС"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Выборка пакетов..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Платформа"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Веб-сайт"
+msgid "Qt version"
+msgstr "Версия Qt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "Электронная почта"
+msgid "PyQt version"
+msgstr "Версия PyQt"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Войдите, чтобы получить проверенные встраиваемые модули и материалы для Ultimaker Cura Enterprise"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Версия"
+msgid "Not yet initialized<br/>"
+msgstr "Еще не инициализировано<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Последнее обновление"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>Версия OpenGL: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Брэнд"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>Поставщик OpenGL: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Загрузки"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>Средство визуализации OpenGL: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Установленные встраиваемые модули"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Обратное отслеживание ошибки"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Встраиваемые модули не установлены."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Журналы"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Установленные материалы"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Отправить отчёт"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Материалы не установлены."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Проверьте наличие подключения к принтеру:\n"
+"- Убедитесь, что принтер включен.\n"
+"- Убедитесь, что принтер подключен к сети.\n"
+"- Убедитесь, что вы вошли в систему (это необходимо для поиска принтеров, подключенных к облаку)."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Связанные встраиваемые модули"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Подключите принтер к сети."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Связанные материалы"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Просмотр руководств пользователей онлайн"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Не удалось подключиться к базе данных пакета Cura. Проверьте свое подключение."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Чтобы отслеживать задания печати при помощи Cura, подключите принтер."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Для установки пакета необходимо принять лицензию"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Выберите параметр для изменения этой модели"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Изменения в вашей учетной записи"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Фильтр..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Отклонить"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Показать всё"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Следующий"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Тип объекта"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Будут добавлены следующие пакеты:"
+msgid "Normal model"
+msgstr "Нормальная модель"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Следующие пакеты невозможно установить из-за несовместимой версии Cura:"
+msgid "Print as support"
+msgstr "Печать в качестве поддержки"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Подтвердить удаление"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Изменить настройки для перекрытий"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Вы удаляете материалы и/или профили, которые все еще используются. Подтверждение приведет к сбросу указанных ниже материалов/профилей к их настройкам по умолчанию."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "Не поддерживать перекрытия"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Материалы"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Заполнение объекта"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Профили"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Ограничивающий объект"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Подтвердить"
+msgid "Select settings"
+msgstr "Выберите параметры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Обновить прошивку"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Цветовая схема"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "Прошивка является программным обеспечением, которое работает на плате вашего 3D принтера. Прошивка управляет шаговыми моторами, регулирует температуру и, в конечном счёте, обеспечивает работу вашего принтера."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Цвет материала"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "Поставляемая с новыми принтерами прошивка работоспособна, но обновления предоставляют больше возможностей и усовершенствований."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Тип линии"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Автоматическое обновление прошивки"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Скорость"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Залить собственную прошивку"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Толщина слоя"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "Невозможно обновить прошивку, так как нет подключения к принтеру."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Ширина линии"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "Невозможно обновить прошивку, так как подключение к принтеру не поддерживает функцию обновления прошивки."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Поток"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Выбрать собственную прошивку"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Режим совместимости"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Обновление прошивки"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Перемещения"
+msgid "Updating firmware."
+msgstr "Обновление прошивки."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Помощники"
+msgid "Firmware update completed."
+msgstr "Обновление прошивки завершено."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Ограждение"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Обновление прошивки не удалось из-за неизвестной ошибки."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Заполнение"
+msgid "Firmware update failed due to an communication error."
+msgstr "Обновление прошивки не удалось из-за ошибки связи."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "Запуск"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Обновление прошивки не удалось из-за ошибки ввода-вывода."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Показать только верхние слои"
+msgid "Firmware update failed due to missing firmware."
+msgstr "Обновление прошивки не удалось из-за её отсутствия."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Показать 5 детализированных слоёв сверху"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Прервано"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Дно / крышка"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Завершено"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Внутренняя стенка"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Подготовка..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "мин"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Прерывается..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "макс"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Сбой"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Приостановка..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Приостановлено"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Возобновляется..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Необходимое действие"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Завершение %1 в %2"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Управление принтером"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Стекло"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Для удаленного управления очередью необходимо обновить программное обеспечение принтера."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Каналы веб-камеры для облачных принтеров невозможно просмотреть из Ultimaker Cura. Щелкните «Управление принтером», чтобы просмотреть эту веб-камеру на сайте Ultimaker Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Загрузка..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Недоступен"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Недостижимо"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Простой"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Подготовка..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Печать"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Без имени"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Анонимн"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Необходимо внести изменения конфигурации"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Подробности"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Недоступный принтер"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "Первое доступное"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Запланировано"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Управление через браузер"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "В очереди нет заданий печати. Выполните нарезку и отправьте задание."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Задания печати"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Общее время печати"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Ожидание"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Печать через сеть"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Печать"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Выбор принтера"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Изменения конфигурации"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Переопределить"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
@@ -2939,685 +2083,1522 @@ msgstr[0] "Для назначенного принтера %1 требуетс�
 msgstr[1] "Для назначенного принтера %1 требуются следующие изменения конфигурации:"
 msgstr[2] "Для назначенного принтера %1 требуются следующие изменения конфигурации:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "Принтер %1 назначен, однако в задании указана неизвестная конфигурация материала."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "Изменить материал %1 с %2 на %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "Загрузите %3 как материал %1 (переопределение этого действия невозможно)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "Изменить экструдер %1 с %2 на %3."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Заменить рабочий стол на %1 (переопределение этого действия невозможно)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "При переопределении к имеющейся конфигурации принтера будут применены указанные настройки. Это может привести к ошибке печати."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Алюминий"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Завершено"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Прерывается..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Прервано"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Сбой"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Приостановка..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Приостановлено"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Возобновляется..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Печать через сеть"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Необходимое действие"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Печать"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Завершение %1 в %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Выбор принтера"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Подключение к сетевому принтеру"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Для печати непосредственно на принтере через сеть необходимо подключить принтер к сети с помощью сетевого кабеля или подключить его к сети Wi-Fi. Если вы не подключили Cura к принтеру, вы можете использовать USB-накопитель для переноса файлов G-Code на принтер."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Выберите свой принтер из приведенного ниже списка:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Правка"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Удалить"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Обновить"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Если ваш принтер отсутствует в списке, обратитесь к <a href='%1'>руководству по решению проблем с сетевой печатью</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Тип"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Версия прошивки"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Адрес"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Данный принтер не настроен для управления группой принтеров."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Данный принтер управляет группой из %1 принтера (-ов)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Принтер по этому адресу ещё не отвечал."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Подключить"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Недействительный IP-адрес"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Введите действительный IP-адрес."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Адрес принтера"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Введите IP-адрес принтера в сети."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Недоступный принтер"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "Первое доступное"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Переместить в начало"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Удалить"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Продолжить"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Приостановка..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Возобновляется..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Пауза"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Прерывается..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Прервать"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Вы уверены, что хотите переместить %1 в начало очереди?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Переместить задание печати в начало очереди"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Вы уверены, что хотите удалить %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Удалить задание печати"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Вы уверены, что хотите прервать %1?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Прервать печать"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "Запланировано"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Управление через браузер"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "В очереди нет заданий печати. Выполните нарезку и отправьте задание."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Задания печати"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Общее время печати"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Ожидание"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Цветовая схема"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Цвет материала"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Тип линии"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Скорость"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Толщина слоя"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Ширина линии"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Поток"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Режим совместимости"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Перемещения"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Помощники"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Ограждение"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Заполнение"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "Запуск"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Показать только верхние слои"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Показать 5 детализированных слоёв сверху"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Дно / крышка"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Внутренняя стенка"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "мин"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "макс"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Проверьте наличие подключения к принтеру:\n"
-"- Убедитесь, что принтер включен.\n"
-"- Убедитесь, что принтер подключен к сети.\n"
-"- Убедитесь, что вы вошли в систему (это необходимо для поиска принтеров, подключенных к облаку)."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Подключите принтер к сети."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Высота (мм)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Просмотр руководств пользователей онлайн"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Максимальная дистанция каждого пикселя от \"Основания.\""
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Чтобы отслеживать задания печати при помощи Cura, подключите принтер."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Основание (мм)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "С этой печатью могут быть связаны некоторые проблемы. Щелкните для просмотра советов по регулировке."
+msgid "The base height from the build plate in millimeters."
+msgstr "Высота основания от стола в миллиметрах."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Ширина (мм)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Трехмерный вид"
+msgid "The width in millimeters on the build plate"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Глубина (мм)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Вид спереди"
+msgid "The depth in millimeters on the build plate"
+msgstr "Глубина в миллиметрах на столе"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Тёмные выше"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Светлые выше"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Вид сверху"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Для литофании темные пиксели должны соответствовать более толстым частям, чтобы сильнее задерживать проходящий свет. Для схем высот более светлые пиксели обозначают более высокий участок. Поэтому более светлые пиксели должны соответствовать более толстым местам в созданной 3D-модели."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Линейный"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Светопроходимость"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Вид слева"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Для литофании предусмотрена простая логарифмическая модель светопроходимости. В картах высот значения пикселей линейно соответствуют высотам."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Проходимость через 1 мм (%)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Вид справа"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Процент света, проникающего в отпечаток толщиной 1 миллиметр. Если уменьшить это значение, контрастность в темных областях изображения увеличится, а в светлых — уменьшится."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Список объектов"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Сглаживание"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Величина сглаживания для применения к изображению."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Магазин"
+msgid "OK"
+msgstr "OK"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "Файл"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Открытие проекта"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "Правка"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Обновить существующий"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "Вид"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Создать новый"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Параметры"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Сводка - Проект Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Расширения"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Как следует решать конфликт в принтере?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Настройки"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Параметры принтера"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "Справка"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Тип"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Новый проект"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Группа принтеров"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Вы действительно желаете начать новый проект? Это действие очистит область печати и сбросит все несохранённые настройки."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Как следует решать конфликт в профиле?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Нарезка на слои..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Параметры профиля"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Невозможно нарезать"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Название"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Вне профиля"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 перекрыт"
+msgstr[1] "%1 перекрыто"
+msgstr[2] "%1 перекрыто"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Производное от"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 перекрыто"
+msgstr[1] "%1, %2 перекрыто"
+msgstr[2] "%1, %2 перекрыто"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Как следует решать конфликт в материале?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Параметры материала"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Видимость параметров"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Режим"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Видимые параметры:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 из %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Загрузка проекта приведет к удалению всех моделей на рабочем столе."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Открыть"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Обработка"
+msgid "Want more?"
+msgstr "Желаете большего?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Нарезка на слои"
+msgid "Backup Now"
+msgstr "Создать резервную копию"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Запустить нарезку на слои"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Автоматическое резервное копирование"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Отмена"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Автоматически создавать резервную копию в день запуска Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Оценка времени"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Версия Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Оценка материала"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Принтеры"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 м"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Материалы"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 г"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Профили"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Оценка времени недоступна"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Плагины"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Оценка расходов недоступна"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Восстановить"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Удалить резервную копию"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Вы уверены, что хотите удалить указанную резервную копию? Данное действие невозможно отменить."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Восстановить резервную копию"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Вам потребуется перезапустить Cura, прежде чем данные будут восстановлены из резервной копии. Вы действительно хотите закрыть Cura прямо сейчас?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Резервное копирование и синхронизация ваших параметров Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Предварительный просмотр"
+msgid "Sign in"
+msgstr "Войти"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Добавить принтер"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Мои резервные копии"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "В данный момент у вас отсутствуют резервные копии. Для создания резервной копии нажмите кнопку «Создать резервную копию»."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "На этапе предварительного просмотра отображается только 5 резервных копий. Для просмотра предыдущих резервных копий удалите одну копию."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Резервные копии Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Дополнительная информация о сборе анонимных данных"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura собирает анонимные данные для повышения качества печати и улучшения взаимодействия с пользователем. Ниже приведен пример всех передаваемых данных:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Не хочу отправлять анонимные данные"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Разрешить отправку анонимных данных"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Плагин пост-обработки"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Добавить сетевой принтер"
+msgid "Post Processing Scripts"
+msgstr "Скрипты пост-обработки"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Добавить скрипт"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Добавить принтер, не подключенный к сети"
+msgid "Settings"
+msgstr "Параметры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Измените активные скрипты пост-обработки."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "Активны следующие скрипты:"
+msgstr[1] "Активны следующие скрипты:"
+msgstr[2] "Активны следующие скрипты:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Добавить облачный принтер"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Пожалуйста, укажите любые изменения, внесённые в Ultimaker Original"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Ожидается ответ от облака"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Нагреваемый стол (официальный набор или самодельный)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Выравнивание стола"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "В учетной записи нет принтеров?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Сейчас вы можете отрегулировать ваш стол, чтобы быть уверенным в качестве последующей печати. При нажатии на кнопку «Перейти к следующей позиции» сопло перейдёт на другую позиции, которую можно будет отрегулировать."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Следующие принтеры в вашей учетной записи добавлены в Cura:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Для каждой позиции, вставьте кусок бумаги под сопло и отрегулируйте высоту стола. Когда кончик сопла немного прижимает бумагу к столу, значит вы выставили правильную высоту стола."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Начало выравнивания стола"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Перейти к следующей позиции"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Добавить принтер вручную"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Добавить принтер по IP-адресу"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Введите IP-адрес своего принтера."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Добавить"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Не удалось подключиться к устройству."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Выйти из %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Не удается подключиться к принтеру Ultimaker?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "От принтера с этим адресом еще не поступал ответ."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Этот принтер невозможно добавить, поскольку это неизвестный принтер либо он не управляет группой."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Назад"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Подключить"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Пользовательское соглашение"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Отклонить и закрыть"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Приветствуем в Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"Выполните указанные ниже действия для настройки\n"
-"Ultimaker Cura. Это займет немного времени."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Приступить"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Войдите на платформу Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Добавляйте настройки материалов и плагины из Marketplace"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Выполняйте резервное копирование и синхронизацию своих настроек материалов и плагинов"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Делитесь идеями и получайте помощь от 48 000 пользователей в сообществе Ultimaker"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Пропустить"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Отклонить"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Создайте бесплатную учетную запись Ultimaker"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Принтер"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Параметры сопла"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Производитель"
+msgid "Nozzle size"
+msgstr "Диаметр сопла"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Автор профиля"
+msgid "mm"
+msgstr "мм"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Имя принтера"
+msgid "Compatible material diameter"
+msgstr "Диаметр совместимого материала"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Присвойте имя принтеру"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Смещение сопла по оси X"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "В вашей сети не найден принтер."
+msgid "Nozzle offset Y"
+msgstr "Смещение сопла по оси Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Обновить"
+msgid "Cooling Fan Number"
+msgstr "Номер охлаждающего вентилятора"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Стартовый G-код экструдера"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Завершающий G-код экструдера"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Параметры принтера"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Добавить принтер по IP-адресу"
+msgid "X (Width)"
+msgstr "X (Ширина)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Добавить облачный принтер"
+msgid "Y (Depth)"
+msgstr "Y (Глубина)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Поиск и устранение неисправностей"
+msgid "Z (Height)"
+msgstr "Z (Высота)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Помогите нам улучшить Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "Форма стола"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura собирает анонимные данные для повышения качества печати и улучшения взаимодействия с пользователем, включая перечисленные ниже:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Начало координат в центре"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Типы принтера"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Нагреваемый стол"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Использование материала"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Подогреваемый объем печати"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Количество слоев"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Вариант G-кода"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Параметры печати"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Параметры головы"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Данные, собранные Ultimaker Cura, не содержат каких-либо персональных данных."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X минимум"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Дополнительная информация"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y минимум"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "Что нового"
+msgid "X max"
+msgstr "X максимум"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Пусто"
+msgid "Y max"
+msgstr "Y максимум"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Примечания к выпуску"
+msgid "Gantry Height"
+msgstr "Высота портала"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Количество экструдеров"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Применить смещения экструдера к GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Стартовый G-код"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Завершающий G-код"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "Мои принтеры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Следите за своими принтерами в Ultimaker Digital Factory."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Создавайте проекты печати в электронной библиотеке."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Задания печати"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Отслеживайте задания печати и запускайте их повторно из истории печати."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Расширяйте возможности Ultimaker Cura за счет плагинов и профилей материалов."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Пройдите электронное обучение Ultimaker и станьте экспертом в области 3D-печати."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Поддержка Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Узнайте, как начать работу с Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Задать вопрос"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Посоветуйтесь со специалистами в сообществе Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Сообщить об ошибке"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Сообщите разработчикам о неполадках."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Посетите веб-сайт Ultimaker."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Печатать выбранную модель с %1"
+msgstr[1] "Печатать выбранные модели с %1"
+msgstr[2] "Печатать выбранные модели с %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Параметры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Новый проект"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Вы действительно желаете начать новый проект? Это действие очистит область печати и сбросит все несохранённые настройки."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Магазин"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Рабочий стол"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "Целевая температура горячего стола. Стол будет нагреваться и охлаждаться, оставаясь на этой температуре. Если установлена в 0, значит нагрев стола отключен."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "Текущая температура горячего стола."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "Температура преднагрева горячего стола."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Отмена"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Преднагрев"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Нагрев горячего стола перед печатью. Вы можете продолжать настройки вашей печати, пока стол нагревается, и вам не понадобится ждать нагрева стола для старта печати."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "Принтер не подключен."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Управление принтером"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Положение толчковой подачи"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Расстояние толчковой подачи"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Отправить G-код"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Отправить свою команду в G-коде подключенному принтеру. Нажмите Enter (Ввод) для отправки команды."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Экструдер"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Целевая температура сопла. Сопло будет нагрето или остужено до указанной температуры. Если значение равно 0, то нагрев будет отключен."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Текущая температура данного сопла."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "Температура предварительного нагрева сопла."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Нагрев сопла перед печатью. Можно продолжать настройки вашей печати во время нагрева, и вам не понадобится ждать нагрева сопла, когда вы будете готовы приступить к печати."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Цвет материала в данном экструдере."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Материал в данном экструдере."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "Сопло, вставленное в данный экструдер."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Открыть файл проекта"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Это проект Cura. Следует открыть его как проект или просто импортировать из него модели?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Запомнить мой выбор"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Открыть как проект"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Импортировать модели"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Сохранить проект"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Экструдер %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 и материал"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Материал"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Больше не показывать сводку по проекту"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Сохранить"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Открыть файл(ы)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Мы нашли один или более проектных файлов среди выбранных вами. Вы можете открыть только один файл проекта. Мы предлагаем импортировать только модели их этих файлов. Желаете продолжить?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Импортировать всё как модели"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "О программе %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "версия: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Полное решение для 3D печати методом наплавления материала."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3626,394 +3607,683 @@ msgstr ""
 "Cura разработана компанией Ultimaker B.V. совместно с сообществом.\n"
 "Cura использует следующие проекты с открытым исходным кодом:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Графический интерфейс пользователя"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Фреймворк приложения"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Генератор G-кода"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Библиотека межпроцессного взаимодействия"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Язык программирования"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Фреймворк GUI"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Фреймворк GUI, интерфейс"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ библиотека интерфейса"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Формат обмена данными"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Вспомогательная библиотека для научных вычислений"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Вспомогательная библиотека для быстрых расчётов"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Вспомогательная библиотека для работы с STL файлами"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Вспомогательная библиотека для работы с плоскими объектами"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Вспомогательная библиотека для работы с треугольными сетками"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Вспомогательная библиотека для работы с 3MF файлами"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Вспомогательная библиотека для метаданных файла и потоковой передачи"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Библиотека последовательного интерфейса"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Библиотека ZeroConf"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Библиотека обрезки полигонов"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Средство проверки статического типа для Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Корневые сертификаты для проверки надежности SSL"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Библиотека отслеживания ошибок Python"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Библиотека упаковки полигонов, разработанная Prusa Research"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Интерфейс Python для libnest2d"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Вспомогательная библиотека для доступа к набору ключей системы"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Расширения Python для Microsoft Windows"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Шрифт"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Иконки SVG"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Развертывание приложений для различных дистрибутивов Linux"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Открыть файл(ы)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Мы нашли один или более проектных файлов среди выбранных вами. Вы можете открыть только один файл проекта. Мы предлагаем импортировать только модели их этих файлов. Желаете продолжить?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Импортировать всё как модели"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Сохранить проект"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Экструдер %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 и материал"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Материал"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Больше не показывать сводку по проекту"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Сохранить"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Сбросить или сохранить изменения"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"Вы изменили некоторые настройки профиля.\n"
-"Сохранить измененные настройки после переключения профилей?\n"
-"Изменения можно отменить и загрузить настройки по умолчанию из \"%1\"."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Параметры профиля"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Текущие изменения"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Всегда спрашивать меня"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Сбросить и никогда больше не спрашивать"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Сохранить и никогда больше не спрашивать"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Отменить изменения"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Сохранить изменения"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Открыть файл проекта"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "Нет элементов для выбора"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Это проект Cura. Следует открыть его как проект или просто импортировать из него модели?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Открыть файл(ы)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Запомнить мой выбор"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Открыть недавние"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Открыть как проект"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Видимые параметры"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Импортировать модели"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Свернуть все категории"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Управление видимостью настроек..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "Материал"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Установить как активный экструдер"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Включить экструдер"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Отключить экструдер"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Материал"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Избранные"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Универсальные"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "Справка"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "Файл"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Сохранить проект..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Экспорт..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Экспорт выбранного..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Настройки"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "Правка"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "Принтер"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Подключенные к сети принтеры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Локальные принтеры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Расширения"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Конфигурации"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Идёт печать"
+msgid "Loading available configurations from the printer..."
+msgstr "Загрузка доступных конфигураций из принтера..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Имя задачи"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Конфигурации недоступны, поскольку принтер отключен."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Время печати"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Данная конфигурация недоступна, поскольку %1 не распознан. Посетите %2 и загрузите подходящий профиль материала."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Осталось примерно"
+msgid "Marketplace"
+msgstr "Магазин"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "Облачный принтер не в сети. Убедитесь, что принтер включен и подключен к Интернету."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "Конфигурация этого экструдера не разрешается и запрещает нарезку на слои."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Этот принтер не связан с вашей учетной записью. Посетите сайт Ultimaker Digital Factory, чтобы установить привязку."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "Нет профилей, соответствующих конфигурации этого экструдера."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "В настоящий момент нет подключения к облаку. Для подключения к облачному принтеру выполните вход."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Выберите конфигурации"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "В настоящий момент нет подключения к облаку. Проверьте подключение к Интернету."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Конфигурации"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Добавить принтер"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Свое"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Управление принтерами"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Принтер"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Подключенные принтеры"
+msgid "Enabled"
+msgstr "Включено"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Предварительно настроенные принтеры"
+msgid "Material"
+msgstr "Материал"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Параметры печати"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Использовать клей для лучшего прилипания с этой комбинацией материалов."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Настройка печати отключена. Невозможно изменить файл с G-кодом."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Печать выбранной модели:"
+msgstr[1] "Печать выбранных моделей:"
+msgstr[2] "Печать выбранных моделей:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Размножить выбранную модель"
+msgstr[1] "Размножить выбранные модели"
+msgstr[2] "Размножить выбранные модели"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Профиль"
+msgid "Number of Copies"
+msgstr "Количество копий"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Сохранить проект..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "Вид"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "Положение камеры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Вид камеры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Перспективная"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Ортографическая"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Просмотр типа"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Войдите на платформу Ultimaker"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Значения некоторых параметров отличаются от значений профиля.\n"
-"\n"
-"Нажмите для открытия менеджера профилей."
+"- Добавляйте настройки материалов и плагины из Marketplace \n"
+" - Выполняйте резервное копирование и синхронизацию своих настроек материалов и плагинов \n"
+" - Делитесь идеями и получайте помощь от 48 000 пользователей в сообществе Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Собственные профили"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Создайте бесплатную учетную запись Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Сбросить текущие параметры"
+msgid "Sign in"
+msgstr "Войти"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Последнее обновление: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Рекомендован"
+msgid "Ultimaker Account"
+msgstr "Учетная запись Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Свое"
+msgid "Sign Out"
+msgstr "Выйти"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Проверка..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Учетная запись синхронизирована"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Что-то пошло не так..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Установить ожидающие обновления"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Проверить наличие обновлений учетной записи"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Нарезка на слои..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Невозможно нарезать"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "Обработка"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Нарезка на слои"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Запустить нарезку на слои"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Отмена"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Оценка времени"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Оценка материала"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 м"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 г"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Оценка времени недоступна"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Оценка расходов недоступна"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Предварительный просмотр"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Этот пакет будет установлен после перезапуска."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Общее"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Параметры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Принтеры"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Материалы"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Профили"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Закрытие %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Вы уверены, что хотите выйти из %1?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Установить пакет"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Открыть файл(ы)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Среди выбранных файлов мы нашли несколько файлов с G-кодом. Вы можете открыть только один файл за раз. Измените свой выбор, пожалуйста."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Добавление принтера"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Что нового"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Вкл"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Выкл"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Экспериментальное"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Параметры печати"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Настройка печати отключена. Невозможно изменить файл с G-кодом."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Рекомендован"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Свое"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
@@ -4021,1809 +4291,1706 @@ msgstr[0] "Нет %1 профиля для конфигураций в экст�
 msgstr[1] "Нет %1 профилей для конфигураций в экструдерах %2. Вместо этого будет использоваться функция по умолчанию"
 msgstr[2] "Нет %1 профилей для конфигураций в экструдерах %2. Вместо этого будет использоваться функция по умолчанию"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Профили"
+msgid "Gradual infill"
+msgstr "Постепенное заполнение"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "В некоторые настройки профиля были внесены изменения. Если их необходимо изменить, перейдите в пользовательский режим."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Постепенное заполнение будет постепенно увеличивать объём заполнения по направлению вверх."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Поддержки"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Генерация структур для поддержки нависающих частей модели. Без этих структур такие части будут складываться во время печати."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Постепенное заполнение"
+msgid "Profiles"
+msgstr "Профили"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Постепенное заполнение будет постепенно увеличивать объём заполнения по направлению вверх."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "В некоторые настройки профиля были внесены изменения. Если их необходимо изменить, перейдите в пользовательский режим."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Прилипание"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Разрешает печать каймы или подложки. Это добавляет плоскую область вокруг или под вашим объектом, которую легко удалить после печати."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Сохранить проект..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Собственные профили"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Подключенные к сети принтеры"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Сбросить текущие параметры"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Локальные принтеры"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Профиль"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Материал"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Значения некоторых параметров отличаются от значений профиля.\n"
+"\n"
+"Нажмите для открытия менеджера профилей."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Избранные"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Параметр"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Универсальные"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Профиль"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Печать выбранной модели:"
-msgstr[1] "Печать выбранных моделей:"
-msgstr[2] "Печать выбранных моделей:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Текущий"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Размножить выбранную модель"
-msgstr[1] "Размножить выбранные модели"
-msgstr[2] "Размножить выбранные модели"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Количество копий"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Сохранить проект..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Экспорт..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
+msgstr[2] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Экспорт выбранного..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Видимость параметров"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Конфигурации"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Свое"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Выбрать все"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Активировать"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Переименовать"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Подтвердить изменение диаметра"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Установлен новый диаметр пластиковой нити %1 мм. Это значение несовместимо с текущим экструдером. Продолжить?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Принтер"
+msgid "Display Name"
+msgstr "Отображаемое имя"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Включено"
+msgid "Brand"
+msgstr "Брэнд"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Материал"
+msgid "Material Type"
+msgstr "Тип материала"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Использовать клей для лучшего прилипания с этой комбинацией материалов."
+msgid "Color"
+msgstr "Цвет"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "Конфигурация этого экструдера не разрешается и запрещает нарезку на слои."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "Нет профилей, соответствующих конфигурации этого экструдера."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Свойства"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Выберите конфигурации"
+msgid "Density"
+msgstr "Плотность"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Конфигурации"
+msgid "Diameter"
+msgstr "Диаметр"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Загрузка доступных конфигураций из принтера..."
+msgid "Filament Cost"
+msgstr "Стоимость материала"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Конфигурации недоступны, поскольку принтер отключен."
+msgid "Filament weight"
+msgstr "Вес материала"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Данная конфигурация недоступна, поскольку %1 не распознан. Посетите %2 и загрузите подходящий профиль материала."
+msgid "Filament length"
+msgstr "Длина материала"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Магазин"
+msgid "Cost per Meter"
+msgstr "Стоимость метра"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Открыть файл(ы)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Данный материал привязан к %1 и имеет ряд его свойств."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "Принтер"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Отвязать материал"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "Материал"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Описание"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Установить как активный экструдер"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Информация об адгезии"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Включить экструдер"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Информация"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Отключить экструдер"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Синхронизировать материалы с принтерами"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Открыть недавние"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Синхронизировать материалы с принтерами"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Видимые параметры"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "Выполнив несколько простых действий, вы сможете синхронизировать все профили материалов со своими принтерами."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Свернуть все категории"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "Зачем нужна синхронизация профилей материалов?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Управление видимостью настроек..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Пуск"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "Положение камеры"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Войти"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Вид камеры"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Для автоматической синхронизации профилей материалов со всеми принтерами, подключенными к Digital Factory, необходимо войти в Cura."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Перспективная"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Синхронизация материалов с помощью USB"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ортографическая"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "Следующие принтеры получат новые профили материалов:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "Рабочий стол"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "При отправке материалов на принтеры что-то пошло не так."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Просмотр типа"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "Профили материалов успешно синхронизированы со следующими принтерами:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Печатается как поддержка."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Поиск и устранение неисправностей"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Другие модели, имеющие перекрытия с этой моделью, изменены."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "Отсутствуют принтеры?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Изменено заполнение перекрытия с этой моделью."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Убедитесь, что все ваши принтеры включены и подключены к Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Перекрытия с этой моделью не поддерживаются."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Обновить список"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Переопределяет %1 настройку."
-msgstr[1] "Переопределяет %1 настройки."
-msgstr[2] "Переопределяет %1 настроек."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Повторить попытку"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Профили"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Готово"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Активировать"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Синхронизация"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Создать"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "Синхронизация"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "Принтеры не обнаружены"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Похоже, у вас нет совместимых принтеров, подключенных к Digital Factory. Убедитесь, что ваш принтер подключен и на нем установлена последняя версия прошивки."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Узнайте, как подключить принтер к Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Обновить"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Синхронизация профилей материалов с помощью USB"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Чтобы загрузить новые профили материалов в принтер, выполните следующие действия."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Нажмите кнопку экспорта архива материалов."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "Сохраните UMM-файл на USB-накопителе."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "Вставьте USB-накопитель в принтер и запустите процедуру загрузки новых профилей материалов."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Загрузка новых профилей материалов в принтер"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Назад"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Экспорт архива материалов"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Экспорт всех материалов"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Дублировать"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Переименовать"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Импорт"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Экспорт"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Создать профиль"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Укажите имя для данного профиля."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Дублировать"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Скопировать профиль"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Экспорт"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Подтвердите удаление"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Вы уверены, что желаете удалить %1? Это нельзя будет отменить!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Переименовать профиль"
+msgid "Import Material"
+msgstr "Импортировать материал"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Импорт профиля"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Успешно импортированный материал <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Не могу импортировать материал <filename>%1</filename>: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Экспорт профиля"
+msgid "Export Material"
+msgstr "Экспортировать материал"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Не могу экспортировать материал <filename>%1</filename>: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Материал успешно экспортирован в <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Принтер: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Обновить профиль текущими параметрами"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Данный профиль использует настройки принтера по умолчанию, поэтому список ниже пуст."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Ваши текущие параметры совпадают с выбранным профилем."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Общие параметры"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Общее"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Создать профиль"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Укажите имя для данного профиля."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Экспорт профиля"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Скопировать профиль"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Переименовать профиль"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Импорт профиля"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Интерфейс"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Валюта:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Тема:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Для применения данных изменений вам потребуется перезапустить приложение."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Нарезать автоматически при изменении настроек."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Нарезать автоматически"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Поведение окна"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Подсвечивать красным области модели, требующие поддержек. Без поддержек эти области не будут напечатаны правильно."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Отобразить нависания"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Отметьте отсутствующие или лишние поверхности модели с помощью предупреждающих знаков. В путях инструментов часто будут отсутствовать детали предполагаемой геометрии."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Показывать ошибки модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Перемещать камеру так, чтобы выбранная модель помещалась в центр экрана"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Центрировать камеру на выбранном объекте"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Следует ли инвертировать стандартный способ увеличения в Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Инвертировать направление увеличения камеры."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Увеличивать по мере движения мышкой?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "В ортогональной проекции изменение масштаба мышью не поддерживается."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Увеличивать по движению мышки"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Следует ли размещать модели на столе так, чтобы они больше не пересекались?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Удостовериться, что модели размещены рядом"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Следует ли опустить модели на стол?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Автоматически опускать модели на стол"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Показывать предупреждающее сообщение в средстве считывания G-кода."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Предупреждающее сообщение в средстве считывания G-кода"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Должен ли слой быть переведён в режим совместимости?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Просматривать слои в режиме совместимости (требуется перезапуск)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Открыть Cura на том месте, где вы остановились в прошлый раз?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Восстановить положение окна при запуске"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Рендеринг камеры какого типа следует использовать?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Рендеринг камеры:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Перспективная"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Ортографическая"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Открытие и сохранение файлов"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Открывать файлы с компьютера и из внешних приложений в одном экземпляре Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Использовать один экземпляр Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "Следует ли очищать печатную пластину перед загрузкой новой модели в единственный экземпляр Cura?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Очистите печатную пластину перед загрузкой модели в единственный экземпляр"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Масштабировать ли модели для размещения внутри печатаемого объёма, если они не влезают в него?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Масштабировать большие модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Модель может показаться очень маленькой, если её размерность задана в метрах, а не миллиметрах. Следует ли масштабировать такие модели?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Масштабировать очень маленькие модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Выбрать модели после их загрузки?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Выбрать модели при загрузке"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Надо ли автоматически добавлять префикс, основанный на имени принтера, к названию задачи на печать?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Добавить префикс принтера к имени задачи"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Показывать сводку при сохранении файла проекта?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Показывать сводку при сохранении проекта"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Стандартное поведение при открытии файла проекта"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Стандартное поведение при открытии файла проекта: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Всегда спрашивать меня"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Всегда открывать как проект"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Всегда импортировать модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "При внесении изменений в профиль и переключении на другой, будет показан диалог, запрашивающий ваше решение о сохранении ваших изменений, или вы можете указать стандартное поведение и не показывать такой диалог."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Поведение по умолчанию для измененных значений настройки при переключении на другой профиль: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Всегда сбрасывать измененные настройки"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Всегда передавать измененные настройки новому профилю"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Приватность"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Можно ли отправлять анонимную информацию о вашей печати в Ultimaker? Следует отметить, что ни модели, ни IP-адреса и никакая другая персональная информация не будет отправлена или сохранена."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Отправлять (анонимно) информацию о печати"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Дополнительная информация"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Обновления"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Должна ли Cura проверять обновления программы при старте?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Проверять обновления при старте"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "При проверке обновлений проверяйте только стабильные версии."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Только стабильные версии"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "При проверке обновлений проверяйте как стабильные, так и бета-версии."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "Стабильные и бета-версии"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Следует ли автоматически проверять наличие новых плагинов при каждом запуске Cura? Настоятельно рекомендуется не выключать это!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Получать уведомления об обновлениях плагинов"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Информация"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Добавить принтер по IP-адресу"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Подтвердить изменение диаметра"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Введите IP-адрес своего принтера."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Установлен новый диаметр пластиковой нити %1 мм. Это значение несовместимо с текущим экструдером. Продолжить?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Добавить"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Отображаемое имя"
+msgid "Could not connect to device."
+msgstr "Не удалось подключиться к устройству."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Тип материала"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Не удается подключиться к принтеру Ultimaker?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Цвет"
+msgid "The printer at this address has not responded yet."
+msgstr "От принтера с этим адресом еще не поступал ответ."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Свойства"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Этот принтер невозможно добавить, поскольку это неизвестный принтер либо он не управляет группой."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Плотность"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Подключить"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Диаметр"
+msgid "Release Notes"
+msgstr "Примечания к выпуску"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Стоимость материала"
+msgid "User Agreement"
+msgstr "Пользовательское соглашение"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Вес материала"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Принимаю"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Длина материала"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Отклонить и закрыть"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Стоимость метра"
+msgid "What's New"
+msgstr "Что нового"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Следующий"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Данный материал привязан к %1 и имеет ряд его свойств."
+msgid "Add a Cloud printer"
+msgstr "Добавить облачный принтер"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Отвязать материал"
+msgid "Waiting for Cloud response"
+msgstr "Ожидается ответ от облака"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Описание"
+msgid "No printers found in your account?"
+msgstr "В учетной записи нет принтеров?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Информация об адгезии"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Следующие принтеры в вашей учетной записи добавлены в Cura:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Создать"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Добавить принтер вручную"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Дублировать"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Добавляйте настройки материалов и плагины из Marketplace"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Синхронизация с принтерами"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Выполняйте резервное копирование и синхронизацию своих настроек материалов и плагинов"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Принтер"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Делитесь идеями и получайте помощь от 48 000 пользователей в сообществе Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Импортировать материал"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Пропустить"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Не могу импортировать материал <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Создайте бесплатную учетную запись Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Успешно импортированный материал <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Приветствуем в Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Экспортировать материал"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"Выполните указанные ниже действия для настройки\n"
+"Ultimaker Cura. Это займет немного времени."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Не могу экспортировать материал <filename>%1</filename>: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Приступить"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Материал успешно экспортирован в <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Пусто"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Синхронизировать материалы с принтерами"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Производитель"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Синхронизировать материалы с принтерами"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Автор профиля"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "Выполнив несколько простых действий, вы сможете синхронизировать все профили материалов со своими принтерами."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Имя принтера"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Пуск"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Присвойте имя принтеру"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "Зачем нужна синхронизация профилей материалов?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Добавить принтер"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Войти"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Добавить сетевой принтер"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Для автоматической синхронизации профилей материалов со всеми принтерами, подключенными к Digital Factory, необходимо войти в Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Добавить принтер, не подключенный к сети"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Синхронизация материалов с помощью USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "В вашей сети не найден принтер."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "Следующие принтеры получат новые профили материалов:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Обновить"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "При отправке материалов на принтеры что-то пошло не так."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Добавить принтер по IP-адресу"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "Профили материалов успешно синхронизированы со следующими принтерами:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Добавить облачный принтер"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Поиск и устранение неисправностей"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "Отсутствуют принтеры?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Помогите нам улучшить Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Убедитесь, что все ваши принтеры включены и подключены к Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Обновить список"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Повторить попытку"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Готово"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura собирает анонимные данные для повышения качества печати и улучшения взаимодействия с пользователем, включая перечисленные ниже:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Синхронизация"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Типы принтера"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "Синхронизация"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Использование материала"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "Принтеры не обнаружены"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Количество слоев"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Похоже, у вас нет совместимых принтеров, подключенных к Digital Factory. Убедитесь, что ваш принтер подключен и на нем установлена последняя версия прошивки."
+msgid "Print settings"
+msgstr "Параметры печати"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Узнайте, как подключить принтер к Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Данные, собранные Ultimaker Cura, не содержат каких-либо персональных данных."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Обновить"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Дополнительная информация"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Синхронизация профилей материалов с помощью USB"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Список объектов"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Чтобы загрузить новые профили материалов в принтер, выполните следующие действия."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "Печатается как поддержка."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Нажмите кнопку экспорта архива материалов."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "Другие модели, имеющие перекрытия с этой моделью, изменены."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "Сохраните UMM-файл на USB-накопителе."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "Изменено заполнение перекрытия с этой моделью."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "Вставьте USB-накопитель в принтер и запустите процедуру загрузки новых профилей материалов."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "Перекрытия с этой моделью не поддерживаются."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Загрузка новых профилей материалов в принтер"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Переопределяет %1 настройку."
+msgstr[1] "Переопределяет %1 настройки."
+msgstr[2] "Переопределяет %1 настроек."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Экспорт архива материалов"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Подключенные принтеры"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Экспорт всех материалов"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Предварительно настроенные принтеры"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Видимость параметров"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "Облачный принтер не в сети. Убедитесь, что принтер включен и подключен к Интернету."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Выбрать все"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Этот принтер не связан с вашей учетной записью. Посетите сайт Ultimaker Digital Factory, чтобы установить привязку."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Принтеры"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "В настоящий момент нет подключения к облаку. Для подключения к облачному принтеру выполните вход."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Вычислено"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "В настоящий момент нет подключения к облаку. Проверьте подключение к Интернету."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Параметр"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Добавить принтер"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Профиль"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Управление принтерами"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Текущий"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Единица"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Без имени"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Не подключен к принтеру"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "Принтер не принимает команды"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "В режиме обслуживания. Пожалуйста, проверьте принтер"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Потеряно соединение с принтером"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Печать..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Приостановлен"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Подготовка..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Пожалуйста, удалите напечатанное"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Прервать печать"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Вы уверены, что желаете прервать печать?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Печатать выбранную модель с %1"
-msgstr[1] "Печатать выбранные модели с %1"
-msgstr[2] "Печатать выбранные модели с %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "Мои принтеры"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Следите за своими принтерами в Ultimaker Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Создавайте проекты печати в электронной библиотеке."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Задания печати"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Отслеживайте задания печати и запускайте их повторно из истории печати."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Расширяйте возможности Ultimaker Cura за счет плагинов и профилей материалов."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Пройдите электронное обучение Ultimaker и станьте экспертом в области 3D-печати."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Поддержка Ultimaker"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Некоторые из скрытых параметров используют значения, отличающиеся от их вычисленных значений.\n"
+"\n"
+"Щёлкните, чтобы сделать эти параметры видимыми."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Узнайте, как начать работу с Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Параметры поиска"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Задать вопрос"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Скопировать значение для всех экструдеров"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Посоветуйтесь со специалистами в сообществе Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Копировать все измененные значения для всех экструдеров"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Сообщить об ошибке"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Спрятать этот параметр"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Сообщите разработчикам о неполадках."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Не показывать этот параметр"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Посетите веб-сайт Ultimaker."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Оставить этот параметр видимым"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Управление принтером"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Видимость параметров..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Положение толчковой подачи"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Этот параметр не используется, поскольку все параметры, на которые он влияет, переопределяются."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Влияет на"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Зависит от"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Расстояние толчковой подачи"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Данная настройка всегда используется совместно всеми экструдерами. Изменение данного значения приведет к изменению значения для всех экструдеров."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Отправить G-код"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Отправить свою команду в G-коде подключенному принтеру. Нажмите Enter (Ввод) для отправки команды."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Эта настройка получена из конфликтующих значений экструдера:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Экструдер"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Целевая температура сопла. Сопло будет нагрето или остужено до указанной температуры. Если значение равно 0, то нагрев будет отключен."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Текущая температура данного сопла."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "Температура предварительного нагрева сопла."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Отмена"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Преднагрев"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Нагрев сопла перед печатью. Можно продолжать настройки вашей печати во время нагрева, и вам не понадобится ждать нагрева сопла, когда вы будете готовы приступить к печати."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Цвет материала в данном экструдере."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Материал в данном экструдере."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "Сопло, вставленное в данный экструдер."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "Принтер не подключен."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Значение этого параметра отличается от значения в профиле.\n"
+"\n"
+"Щёлкните для восстановления значения из профиля."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Рабочий стол"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "Целевая температура горячего стола. Стол будет нагреваться и охлаждаться, оставаясь на этой температуре. Если установлена в 0, значит нагрев стола отключен."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "Текущая температура горячего стола."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "Температура преднагрева горячего стола."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Нагрев горячего стола перед печатью. Вы можете продолжать настройки вашей печати, пока стол нагревается, и вам не понадобится ждать нагрева стола для старта печати."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Войти"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Добавляйте настройки материалов и плагины из Marketplace \n"
-" - Выполняйте резервное копирование и синхронизацию своих настроек материалов и плагинов \n"
-" - Делитесь идеями и получайте помощь от 48 000 пользователей в сообществе Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Создайте бесплатную учетную запись Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Последнее обновление: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Учетная запись Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Выйти"
+"Обычно это значение вычисляется, но в настоящий момент было установлено явно.\n"
+"\n"
+"Щёлкните для восстановления вычисленного значения."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Проверка..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Учетная запись синхронизирована"
+msgid "Active print"
+msgstr "Идёт печать"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Что-то пошло не так..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Установить ожидающие обновления"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Проверить наличие обновлений учетной записи"
+msgid "Job Name"
+msgstr "Имя задачи"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Без имени"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Время печати"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "Нет элементов для выбора"
+msgid "Estimated time left"
+msgstr "Осталось примерно"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Показать онлайн-руководство по решению проблем"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Полный экран"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Выйти из полноэкранного режима"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "Отмена"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "Возврат"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "Выход"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "Трехмерный вид"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Вид спереди"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Вид сверху"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Вид снизу"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Вид слева"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Вид справа"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Настроить Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "Добавить принтер..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Управление принтерами..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Управление материалами..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Добавить больше материалов из Магазина"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "Обновить профиль текущими параметрами"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "Сбросить текущие параметры"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "Создать профиль из текущих параметров..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Управление профилями..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Показать онлайн документацию"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Отправить отчёт об ошибке"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Что нового"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "О Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Удалить выбранное"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Центрировать выбранное"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Размножить выбранное"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Удалить модель"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Поместить модель по центру"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "Сгруппировать модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Разгруппировать модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "Объединить модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "Дублировать модель..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Выбрать все модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Очистить стол"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Перезагрузить все модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Выровнять все модели по всем рабочим столам"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Выровнять все модели"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Выровнять выбранные"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Сбросить позиции всех моделей"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Сбросить преобразования всех моделей"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "Открыть файл(ы)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "Новый проект..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Показать конфигурационный каталог"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Видимость параметров..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Магазин"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Этот параметр не используется, поскольку все параметры, на которые он влияет, переопределяются."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Влияет на"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Зависит от"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Данная настройка всегда используется совместно всеми экструдерами. Изменение данного значения приведет к изменению значения для всех экструдеров."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Эта настройка получена из конфликтующих значений экструдера:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Значение этого параметра отличается от значения в профиле.\n"
-"\n"
-"Щёлкните для восстановления значения из профиля."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Обычно это значение вычисляется, но в настоящий момент было установлено явно.\n"
-"\n"
-"Щёлкните для восстановления вычисленного значения."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Параметры поиска"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Скопировать значение для всех экструдеров"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Копировать все измененные значения для всех экструдеров"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Спрятать этот параметр"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Не показывать этот параметр"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Оставить этот параметр видимым"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Некоторые из скрытых параметров используют значения, отличающиеся от их вычисленных значений.\n"
-"\n"
-"Щёлкните, чтобы сделать эти параметры видимыми."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Этот пакет будет установлен после перезапуска."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Параметры"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Закрытие %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Вы уверены, что хотите выйти из %1?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Установить пакет"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Трехмерный вид"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Открыть файл(ы)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Вид спереди"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Среди выбранных файлов мы нашли несколько файлов с G-кодом. Вы можете открыть только один файл за раз. Измените свой выбор, пожалуйста."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Вид сверху"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Добавление принтера"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Вид слева"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Что нового"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Вид справа"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Предоставляет параметры для каждой модели."
+msgid "Provides a prepare stage in Cura."
+msgstr "Обеспечивает подготовительный этап в Cura."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Инструмент для настройки каждой модели"
+msgid "Prepare Stage"
+msgstr "Подготовительный этап"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Предоставляет поддержку для импорта профилей Cura."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Предоставляет поддержку для экспорта профилей Cura."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Чтение профиля Cura"
+msgid "Cura Profile Writer"
+msgstr "Запись профиля Cura"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Предоставляет поддержку для чтения X3D файлов."
+msgid "Provides support for reading model files."
+msgstr "Предоставляет поддержку для чтения файлов моделей."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "Чтение X3D"
+msgid "Trimesh Reader"
+msgstr "Средство чтения Trimesh"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Резервное копирование и восстановление конфигурации."
+msgid "Checks for firmware updates."
+msgstr "Проверяет наличие обновлений ПО."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Резервные копии Cura"
+msgid "Firmware Update Checker"
+msgstr "Проверка обновлений"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Предоставляет возможность изменения параметров принтера (такие как рабочий объём, диаметр сопла и так далее)"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Регистрирует определенные события в журнале, чтобы их можно было использовать в отчетах об аварийном завершении работы"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Параметры принтера действие"
+msgid "Sentry Logger"
+msgstr "Контрольный журнал"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Создание объекта стирания для блокировки печати элемента поддержки в определенных местах"
+msgid "Provides a monitor stage in Cura."
+msgstr "Обеспечивает этап мониторинга в Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Средство стирания элемента поддержки"
+msgid "Monitor Stage"
+msgstr "Этап мониторинга"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5835,105 +6002,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Плагин для работы с внешним носителем"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Обеспечение действий принтера для обновления прошивки."
+msgid "Provides support for reading AMF files."
+msgstr "Обеспечивает поддержку чтения файлов AMF."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Средство обновления прошивки"
+msgid "AMF Reader"
+msgstr "Средство чтения AMF"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Предоставляет поддержку для импортирования профилей из устаревших версий Cura."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Предоставляет поддержку для чтения пакетов формата Ultimaker."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Чтение устаревших профилей Cura"
+msgid "UFP Reader"
+msgstr "Средство считывания UFP"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Предоставляет поддержку для чтения 3MF файлов."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Подключается к цифровой библиотеке, позволяя Cura открывать файлы из цифровой библиотеки и сохранять файлы в нее."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Чтение 3MF"
+msgid "Ultimaker Digital Library"
+msgstr "Цифровая библиотека Ultimaker"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Предоставляет поддержку для записи пакетов формата Ultimaker."
+msgid "Provides the Per Model Settings."
+msgstr "Предоставляет параметры для каждой модели."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "Средство записи UFP"
+msgid "Per Model Settings Tool"
+msgstr "Инструмент для настройки каждой модели"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Регистрирует определенные события в журнале, чтобы их можно было использовать в отчетах об аварийном завершении работы"
+msgid "Provides a machine actions for updating firmware."
+msgstr "Обеспечение действий принтера для обновления прошивки."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Контрольный журнал"
+msgid "Firmware Updater"
+msgstr "Средство обновления прошивки"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Предоставляет поддержку для импортирования профилей из G-Code файлов."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Управляет сетевыми соединениями с сетевыми принтерами Ultimaker 3."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Средство считывания профиля из G-кода"
+msgid "Ultimaker Network Connection"
+msgstr "Соединение с сетью Ultimaker"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Обеспечивает действия на этапе предварительного просмотра в Cura."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Проверка моделей и конфигурации печати для выявления возможных проблем печати; рекомендации."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Этап предварительного просмотра"
+msgid "Model Checker"
+msgstr "Средство проверки моделей"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Предоставляет рентгеновский вид."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Просмотр в рентгене"
+msgid "Simulation View"
+msgstr "Вид моделирования"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Предоставляет интерфейс к движку CuraEngine."
+msgid "Writes g-code to a file."
+msgstr "Записывает G-код в файл."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Движок CuraEngine"
+msgid "G-code Writer"
+msgstr "Средство записи G-кода"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Обеспечивает поддержку чтения файлов AMF."
+msgid "Provides support for writing 3MF files."
+msgstr "Предоставляет возможность записи 3MF файлов."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Средство чтения AMF"
+msgid "3MF Writer"
+msgstr "Запись 3MF"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -5945,175 +6112,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Средство считывания сжатого G-кода"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Расширение, которое позволяет пользователю создавать скрипты для постобработки"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Предоставляет возможности по чтению и записи профилей материалов в виде XML."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Пост обработка"
+msgid "Material Profiles"
+msgstr "Профили материалов"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Предоставляет поддержку для экспорта профилей Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Предоставляет интерфейс к движку CuraEngine."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Запись профиля Cura"
+msgid "CuraEngine Backend"
+msgstr "Движок CuraEngine"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Принимает G-Code и отправляет его на принтер. Плагин также может обновлять прошивку."
+msgid "Provides support for reading X3D files."
+msgstr "Предоставляет поддержку для чтения X3D файлов."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Печать через USB"
+msgid "X3D Reader"
+msgstr "Чтение X3D"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Обеспечивает подготовительный этап в Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Обеспечивает возможность генерировать печатаемую геометрию из файлов двухмерных изображений."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Подготовительный этап"
+msgid "Image Reader"
+msgstr "Чтение изображений"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Позволяет загружать и отображать файлы G-code."
+msgid "Provides support for reading 3MF files."
+msgstr "Предоставляет поддержку для чтения 3MF файлов."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Чтение G-code"
+msgid "3MF Reader"
+msgstr "Чтение 3MF"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Обеспечивает возможность генерировать печатаемую геометрию из файлов двухмерных изображений."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Предоставляет поддержку для записи пакетов формата Ultimaker."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Чтение изображений"
+msgid "UFP Writer"
+msgstr "Средство записи UFP"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Предоставляет дополнительные возможности для принтеров Ultimaker (такие как мастер выравнивания стола, выбора обновления и так далее)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Предоставляет поддержку для импортирования профилей из устаревших версий Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Действия с принтерами Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Чтение устаревших профилей Cura"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Записывает G-код в сжатый архив."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Обновляет конфигурации Cura 4.3 до Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Средство записи сжатого G-кода"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Обновление версии 4.3 до 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Проверяет наличие обновлений ПО."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Обновляет настройки Cura 2.1 до Cura 2.2."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Проверка обновлений"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Обновление версии 2.1 до 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Отправляет анонимную информацию о нарезке моделей. Может быть отключено через настройки."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Обновляет конфигурации Cura 4.1 до Cura 4.2."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Информация о нарезке модели"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Обновление версии 4.1 до 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Предоставляет возможности по чтению и записи профилей материалов в виде XML."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Профили материалов"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Подключается к цифровой библиотеке, позволяя Cura открывать файлы из цифровой библиотеки и сохранять файлы в нее."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Обновляет конфигурации Cura 4.5 до Cura 4.6."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Цифровая библиотека Ultimaker"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Обновление версии 4.5 до 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Поиск, управление и установка новых пакетов Cura."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Обновляет настройки Cura 3.3 до Cura 3.4."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Панель инструментов"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Обновление версии 3.3 до 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Записывает G-код в файл."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Обновляет конфигурации Cura 4.8 до Cura 4.9."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Средство записи G-кода"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "Обновление версии 4.8 до 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Открытие вида моделирования."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Обновляет настройки Cura 2.7 до Cura 3.0."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Вид моделирования"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Обновление версии 2.7 до 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Обновляет конфигурации Cura 4.5 до Cura 4.6."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Обновляет конфигурации Cura 4.4 до Cura 4.5."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Обновление версии 4.5 до 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Обновление версии 4.4 до 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Обновляет настройки Cura 2.5 до Cura 2.6."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Обновление настроек Cura 3.0 до Cura 3.1."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Обновление версии 2.5 до 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Обновление версии 3.0 до 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6125,115 +6292,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "Обновление версии с 4.6.0 до 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Обновляет конфигурации Cura 4.7 до Cura 4.8."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Обновляет настройки Cura 2.6 до Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Обновление версии 4.7 до 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Обновление версии 2.6 до 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Обновляет настройки Cura 3.4 до Cura 3.5."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Обновляет конфигурации Cura 4.2 до Cura 4.3."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Обновление версии 3.4 до 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Обновление версии 4.2 до 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Обновляет настройки Cura 2.1 до Cura 2.2."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Обновляет конфигурации Cura 4.0 до Cura 4.1."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Обновление версии 2.1 до 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Обновление версии 4.0 до 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Обновляет настройки Cura 3.2 до Cura 3.3."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Обновляет конфигурацию Cura 4.6.2 до Cura 4.7."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Обновление версии 3.2 до 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Обновление версии с 4.6.2 до 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Обновляет конфигурации Cura 4.8 до Cura 4.9."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Обновляет конфигурации Cura 4.9 до Cura 4.10."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "Обновление версии 4.8 до 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "Обновление версии 4.9 до 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Обновляет конфигурацию Cura 4.6.2 до Cura 4.7."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Обновляет настройки Cura 2.2 до Cura 2.4."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Обновление версии с 4.6.2 до 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Обновление версии 2.2 до 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Обновляет конфигурации Cura 4.2 до Cura 4.3."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Обновляет настройки Cura 3.2 до Cura 3.3."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Обновление версии 4.2 до 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Обновление версии 3.2 до 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Обновляет конфигурации Cura 4.3 до Cura 4.4."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Обновляет настройки Cura 2.5 до Cura 2.6."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Обновление версии 4.3 до 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Обновление версии 2.5 до 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Обновляет конфигурации Cura 4.9 до Cura 4.10."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Обновляет конфигурации Cura 3.5 до Cura 4.0."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "Обновление версии 4.9 до 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Обновление версии 3.5 до 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Обновляет настройки Cura 2.7 до Cura 3.0."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Обновляет настройки Cura 3.4 до Cura 3.5."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Обновление версии 2.7 до 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Обновление версии 3.4 до 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Обновляет настройки Cura 2.6 до Cura 2.7."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Обновляет конфигурации Cura 4.7 до Cura 4.8."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Обновление версии 2.6 до 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Обновление версии 4.7 до 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6245,105 +6412,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "Обновление версии 4.11 до 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Обновляет настройки Cura 3.3 до Cura 3.4."
+msgid "Backup and restore your configuration."
+msgstr "Резервное копирование и восстановление конфигурации."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Обновление версии 3.3 до 3.4"
+msgid "Cura Backups"
+msgstr "Резервные копии Cura"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Обновление настроек Cura 3.0 до Cura 3.1."
+msgid "Provides support for importing Cura profiles."
+msgstr "Предоставляет поддержку для импорта профилей Cura."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Обновление версии 3.0 до 3.1"
+msgid "Cura Profile Reader"
+msgstr "Чтение профиля Cura"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Обновляет конфигурации Cura 4.0 до Cura 4.1."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Отправляет анонимную информацию о нарезке моделей. Может быть отключено через настройки."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Обновление версии 4.0 до 4.1"
+msgid "Slice info"
+msgstr "Информация о нарезке модели"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Обновляет конфигурации Cura 4.4 до Cura 4.5."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Предоставляет поддержку для импортирования профилей из G-Code файлов."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Обновление версии 4.4 до 4.5"
+msgid "G-code Profile Reader"
+msgstr "Средство считывания профиля из G-кода"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Обновляет настройки Cura 2.2 до Cura 2.4."
+msgid "Writes g-code to a compressed archive."
+msgstr "Записывает G-код в сжатый архив."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Обновление версии 2.2 до 2.4"
+msgid "Compressed G-code Writer"
+msgstr "Средство записи сжатого G-кода"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Обновляет конфигурации Cura 4.1 до Cura 4.2."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Расширение, которое позволяет пользователю создавать скрипты для постобработки"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Обновление версии 4.1 до 4.2"
+msgid "Post Processing"
+msgstr "Пост обработка"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Обновляет конфигурации Cura 3.5 до Cura 4.0."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Создание объекта стирания для блокировки печати элемента поддержки в определенных местах"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Обновление версии 3.5 до 4.0"
+msgid "Support Eraser"
+msgstr "Средство стирания элемента поддержки"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Управляет сетевыми соединениями с сетевыми принтерами Ultimaker 3."
+msgid "Provides a preview stage in Cura."
+msgstr "Обеспечивает действия на этапе предварительного просмотра в Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Соединение с сетью Ultimaker"
+msgid "Preview Stage"
+msgstr "Этап предварительного просмотра"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Предоставляет поддержку для чтения файлов моделей."
+msgid "Provides the X-Ray view."
+msgstr "Предоставляет рентгеновский вид."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Средство чтения Trimesh"
+msgid "X-Ray View"
+msgstr "Просмотр в рентгене"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Предоставляет поддержку для чтения пакетов формата Ultimaker."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Предоставляет дополнительные возможности для принтеров Ultimaker (такие как мастер выравнивания стола, выбора обновления и так далее)"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Средство считывания UFP"
+msgid "Ultimaker machine actions"
+msgstr "Действия с принтерами Ultimaker"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6355,35 +6532,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Обзор"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Предоставляет возможность записи 3MF файлов."
+msgid "Allows loading and displaying G-code files."
+msgstr "Позволяет загружать и отображать файлы G-code."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Запись 3MF"
+msgid "G-code Reader"
+msgstr "Чтение G-code"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Обеспечивает этап мониторинга в Cura."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Предоставляет возможность изменения параметров принтера (такие как рабочий объём, диаметр сопла и так далее)"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Этап мониторинга"
+msgid "Machine Settings Action"
+msgstr "Параметры принтера действие"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Проверка моделей и конфигурации печати для выявления возможных проблем печати; рекомендации."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Принимает G-Code и отправляет его на принтер. Плагин также может обновлять прошивку."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Средство проверки моделей"
+msgid "USB printing"
+msgstr "Печать через USB"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Синхронизация материалов"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "Для активации изменений вам потребуется завершить работу программного обеспечения {} и перезапустить его."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "Синхронизация..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "В вашей учетной записи Ultimaker обнаружены изменения"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "Хотите синхронизировать пакеты материалов и программного обеспечения со своей учетной записью?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Синхронизация"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Отклонить и удалить из учетной записи"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "Встраиваемые модули ({} шт.) не загружены"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Лицензионное соглашение плагина"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Преобразование изображения..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "Ширина в миллиметрах на столе."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Магазин"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "Вам потребуется перезапустить Cura для активации изменений в пакетах."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Установить"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Установлено"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Премиум"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Перейти в интернет-магазин"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Поиск материалов"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Совместимость"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Принтер"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Рабочий стол"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Поддержки"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Качество"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Таблица технических характеристик"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Паспорт безопасности"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Инструкции по печати"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Веб-сайт"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "Для выполнения установки или обновления необходимо <a href='%1'>войти</a>"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>Приобретение катушек с материалом</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Обновить"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Обновление"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Обновлено"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Назад"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Плагины"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Установлено"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Установка выполнится при перезагрузке"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "Для выполнения обновления необходимо <a href='%1'>войти</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Переход на более раннюю версию"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Удалить"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Вклад в развитие сообщества"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Плагины сообщества"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Универсальные материалы"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Выборка пакетов..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Веб-сайт"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "Электронная почта"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Войдите, чтобы получить проверенные встраиваемые модули и материалы для Ultimaker Cura Enterprise"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Версия"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Последнее обновление"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "Загрузки"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Установленные встраиваемые модули"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "Встраиваемые модули не установлены."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Установленные материалы"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "Материалы не установлены."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Связанные встраиваемые модули"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Связанные материалы"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Не удалось подключиться к базе данных пакета Cura. Проверьте свое подключение."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "Для установки пакета необходимо принять лицензию"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Изменения в вашей учетной записи"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Отклонить"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "Будут добавлены следующие пакеты:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "Следующие пакеты невозможно установить из-за несовместимой версии Cura:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Подтвердить удаление"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Вы удаляете материалы и/или профили, которые все еще используются. Подтверждение приведет к сбросу указанных ниже материалов/профилей к их настройкам по умолчанию."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Материалы"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Профили"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Подтвердить"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "С этой печатью могут быть связаны некоторые проблемы. Щелкните для просмотра советов по регулировке."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Вспомогательная библиотека для работы с плоскими объектами"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "Вы изменили некоторые настройки профиля.\n"
+#~ "Сохранить измененные настройки после переключения профилей?\n"
+#~ "Изменения можно отменить и загрузить настройки по умолчанию из \"%1\"."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "Рабочий стол"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Создать"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Дублировать"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Принтер: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Обновить профиль текущими параметрами"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Тема:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Для применения данных изменений вам потребуется перезапустить приложение."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Дополнительная информация"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Создать"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Синхронизация с принтерами"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Принтер"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Единица"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Показать онлайн-руководство по решению проблем"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Добавить больше материалов из Магазина"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Выровнять все модели по всем рабочим столам"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Магазин"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Поиск, управление и установка новых пакетов Cura."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Панель инструментов"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Открытие вида моделирования."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
@@ -8210,8 +8745,7 @@ msgstr "Средство проверки моделей"
 #~ " - Thomas Karl Pietrowski"
 #~ msgstr ""
 #~ "Уважаемый клиент!\n"
-#~ "В данный момент этот плагин запущен в операционной системе, отличной от Windows. Плагин функционирует исключительно под управлением ОС Windows с установленным ПО SolidWorks, для которого имеется подходящая лицензия. Установите данный плагин на принтер под управлением Windows с установленным ПО "
-#~ "SolidWorks.\n"
+#~ "В данный момент этот плагин запущен в операционной системе, отличной от Windows. Плагин функционирует исключительно под управлением ОС Windows с установленным ПО SolidWorks, для которого имеется подходящая лицензия. Установите данный плагин на принтер под управлением Windows с установленным ПО SolidWorks.\n"
 #~ "\n"
 #~ "С наилучшими пожеланиями,\n"
 #~ " - Томас Карл Петровски (Thomas Karl Pietrowski)"
diff --git a/resources/i18n/ru_RU/fdmextruder.def.json.po b/resources/i18n/ru_RU/fdmextruder.def.json.po
index 1b954f3ce2..27d62233f0 100644
--- a/resources/i18n/ru_RU/fdmextruder.def.json.po
+++ b/resources/i18n/ru_RU/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 14:58+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Ruslan Popov <ruslan.popov@gmail.com>, Russian <info@bothof.nl>\n"
diff --git a/resources/i18n/ru_RU/fdmprinter.def.json.po b/resources/i18n/ru_RU/fdmprinter.def.json.po
index 810f0034a4..6aa903e6b2 100644
--- a/resources/i18n/ru_RU/fdmprinter.def.json.po
+++ b/resources/i18n/ru_RU/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 14:58+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Russian <info@lionbridge.com>, Ruslan Popov <ruslan.popov@gmail.com>, Russian <info@bothof.nl>\n"
@@ -57,7 +57,9 @@ msgctxt "machine_start_gcode description"
 msgid ""
 "G-code commands to be executed at the very start - separated by \n"
 "."
-msgstr "Команды в G-коде, которые будут выполнены в самом начале, разделенные с помощью \n."
+msgstr ""
+"Команды в G-коде, которые будут выполнены в самом начале, разделенные с помощью \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
@@ -69,7 +71,9 @@ msgctxt "machine_end_gcode description"
 msgid ""
 "G-code commands to be executed at the very end - separated by \n"
 "."
-msgstr "Команды в G-коде, которые будут выполнены в самом конце, разделенные с помощью \n."
+msgstr ""
+"Команды в G-коде, которые будут выполнены в самом конце, разделенные с помощью \n"
+"."
 
 #: fdmprinter.def.json
 msgctxt "material_guid label"
@@ -463,8 +467,8 @@ msgstr "Полигон головки принтера и вентилятора
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "2D контур головы принтера (включая крышки вентилятора)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -737,6 +741,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "Диаметр колесика, перемещающего материал в питатель."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Качество"
@@ -957,6 +971,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Количество линий стенки. При вычислении толщины стенки, это значение округляется до целого."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Расстояние очистки внешней стенки"
@@ -987,14 +1051,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Оптимизирует порядок, в котором печатаются стенки, для уменьшения количества откатов и перемещений. Большинство моделей будут распечатываться быстрее, но не все. Сравнивайте оценочное время печати с оптимизацией и без нее. При выборе каймы в качестве типа приклеивания к рабочему столу первый слой не оптимизируется."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Печать внешних стенок"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Указывает печатать стенки снаружи внутрь. Это помогает улучшить аккуратность печати по осям X и Y, при использовании вязких пластиков подобно ABS. Однако это может отрицательно повлиять на качество печати внешних поверхностей, особенно нависающих."
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1007,94 +1081,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Печатает дополнительную стенку через слой. Таким образом, заполнение заключается между этими дополнительными стенками, что приводит к повышению прочности печати."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Компенсация перекрытия стен"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Компенсирует поток для печатаемых частей стен в местах, где уже напечатана стена."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Компенсация перекрытия внешних стен"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Компенсирует поток для печатаемых частей внешних стен в местах, где уже напечатана стена."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "Компенсация перекрытия внутренних стен"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Компенсирует поток для печатаемых частей внутренних стен в местах, где уже напечатана стена."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Минимальный поток для стенки"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Минимальный разрешенный поток (в процентах) для линии стенки. Компенсация перекрытия стенок снижает поток для стенки при нахождении вблизи от существующей стенки. Стенки с потоком меньше указанного значения будут заменены посредством движения. При использовании этой настройки необходимо активировать компенсацию перекрытия стенок и печатать сначала внешнюю стенку, а затем — внутренние."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Предпочтительный откат"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Если включено, вместо комбинга для движений, заменяющих стенки с потоком меньше минимального установленного порога, используется откат."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Заполнение зазоров между стенками"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Заполняет зазоры между стенками, когда это необходимо."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Нигде"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "Печать тонких стенок"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Везде"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Печать частей модели, которые по горизонтали тоньше диаметра сопла."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Фильтровать только небольшие зазоры"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Фильтровать только небольшие зазоры для сокращения пузырей за пределами модели."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "Печать тонких стенок"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Печать частей модели, которые по горизонтали тоньше диаметра сопла."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -1729,10 +1793,7 @@ msgstr "Шаблон заполнения"
 #: fdmprinter.def.json
 msgctxt "infill_pattern description"
 msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object."
-msgstr "Шаблон заполняющего материала печати. Линейное и зигзагообразное заполнение меняет направление на чередующихся слоях, снижая расходы на материал. Шаблоны"
-" «сетка», «треугольник», «шестигранник из треугольников», «куб», «восьмигранник», «четверть куба», «крестовое», «концентрическое» полностью печатаются"
-" в каждом слое. Шаблоны заполнения «гироид», «куб», «четверть куба» и «восьмигранник» меняются в каждом слое, чтобы обеспечить более равномерное распределение"
-" прочности в каждом направлении. Шаблон заполнения «молния» пытается минимизировать заполнение, поддерживая только верхнюю область объекта."
+msgstr "Шаблон заполняющего материала печати. Линейное и зигзагообразное заполнение меняет направление на чередующихся слоях, снижая расходы на материал. Шаблоны «сетка», «треугольник», «шестигранник из треугольников», «куб», «восьмигранник», «четверть куба», «крестовое», «концентрическое» полностью печатаются в каждом слое. Шаблоны заполнения «гироид», «куб», «четверть куба» и «восьмигранник» меняются в каждом слое, чтобы обеспечить более равномерное распределение прочности в каждом направлении. Шаблон заполнения «молния» пытается минимизировать заполнение, поддерживая только верхнюю область объекта."
 
 #: fdmprinter.def.json
 msgctxt "infill_pattern option grid"
@@ -2199,6 +2260,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Для компенсации усадки материала при остывании модель будет масштабирована с этим коэффициентом."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Кристаллический материал"
@@ -2709,24 +2790,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "Первые несколько слоёв печатаются на медленной скорости, чем вся остальная модель, чтобы получить лучшее прилипание к столу и увеличить вероятность успешной печати. Скорость последовательно увеличивается по мере печати указанного количества слоёв."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Выравнивание потока материала"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Печатать более тонкие чем обычно линии быстрее, чтобы объём выдавленного материала в секунду оставался постоянным. Тонкие части в вашей модели могут требовать, чтобы линии были напечатаны с меньшей шириной, чем разрешено настройками. Этот параметр управляет скоростью изменения таких линий."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Максимальная скорость выравнивания потока"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Максимальная скорость печати до которой может увеличиваться скорость печати при выравнивании потока."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4464,6 +4535,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "Этот экструдер используется для печати юбки/каймы/подложки. Используется при наличии нескольких экструдеров."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Количество линий юбки"
@@ -4628,6 +4739,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "Расстояние между линиями подложки на её верхних слоях. Расстояние должно быть равно ширине линии, тогда поверхность будет сплошной."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Толщина середины подложки"
@@ -5128,6 +5249,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "Максимальное допустимое отклонение при снижении разрешения для параметра максимального разрешения. Увеличение этого значения понизит точность печати и уменьшит значение G-кода. Максимальное отклонение является пределом для максимального разрешения, поэтому, если они конфликтуют, истинным считается максимальное отклонение."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Специальные режимы"
@@ -6422,6 +6553,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "Малые элементы на первом слое будут напечатаны со скоростью, составляющей этот процент от их нормальной скорости печати. Более медленная печать может улучшить адгезию и точность."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Параметры командной строки"
@@ -6481,6 +6642,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Матрица преобразования, применяемая к модели при её загрузке из файла."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "2D контур головы принтера (включая крышки вентилятора)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Печать внешних стенок"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Указывает печатать стенки снаружи внутрь. Это помогает улучшить аккуратность печати по осям X и Y, при использовании вязких пластиков подобно ABS. Однако это может отрицательно повлиять на качество печати внешних поверхностей, особенно нависающих."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Компенсация перекрытия стен"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Компенсирует поток для печатаемых частей стен в местах, где уже напечатана стена."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Компенсация перекрытия внешних стен"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Компенсирует поток для печатаемых частей внешних стен в местах, где уже напечатана стена."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "Компенсация перекрытия внутренних стен"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Компенсирует поток для печатаемых частей внутренних стен в местах, где уже напечатана стена."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Минимальный поток для стенки"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Минимальный разрешенный поток (в процентах) для линии стенки. Компенсация перекрытия стенок снижает поток для стенки при нахождении вблизи от существующей стенки. Стенки с потоком меньше указанного значения будут заменены посредством движения. При использовании этой настройки необходимо активировать компенсацию перекрытия стенок и печатать сначала внешнюю стенку, а затем — внутренние."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Предпочтительный откат"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Если включено, вместо комбинга для движений, заменяющих стенки с потоком меньше минимального установленного порога, используется откат."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Заполнение зазоров между стенками"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Заполняет зазоры между стенками, когда это необходимо."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Нигде"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Везде"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Фильтровать только небольшие зазоры"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Фильтровать только небольшие зазоры для сокращения пузырей за пределами модели."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Выравнивание потока материала"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Печатать более тонкие чем обычно линии быстрее, чтобы объём выдавленного материала в секунду оставался постоянным. Тонкие части в вашей модели могут требовать, чтобы линии были напечатаны с меньшей шириной, чем разрешено настройками. Этот параметр управляет скоростью изменения таких линий."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Максимальная скорость выравнивания потока"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Максимальная скорость печати до которой может увеличиваться скорость печати при выравнивании потока."
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "Команды в G-коде, которые будут выполнены в самом начале, разделенные с помощью \\n."
diff --git a/resources/i18n/tr_TR/cura.po b/resources/i18n/tr_TR/cura.po
index c69664af1c..3698ee3908 100644
--- a/resources/i18n/tr_TR/cura.po
+++ b/resources/i18n/tr_TR/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2022-01-10 11:57+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Turkish <info@lionbridge.com>, Turkish <info@bothof.nl>\n"
@@ -17,1427 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.3\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Kullanıcı veri dizininden arşiv oluşturulamadı: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122 /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Yedekle"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Uygun veri veya meta veri olmadan Cura yedeği geri yüklenmeye çalışıldı."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Geçerli sürümünüzden yüksek bir sürüme sahip bir Cura yedeği geri yüklenmeye çalışıldı."
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "Cura yedeklemesi geri yüklenmeye çalışılırken aşağıdaki hata oluştu:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "Lütfen baskıya başlamadan önce malzeme profillerini yazıcılarınızla senkronize edin."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "Yeni malzemeler yüklendi"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "Malzemeleri yazıcılarla senkronize et"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "Daha fazla bilgi edinin"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "Malzeme arşivi {} konumuna kaydedilemedi:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "Malzeme arşivi kaydedilemedi"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "Bilinmeyen hata."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Portalın yazdırılan modeller ile çarpışmasını önlemek için yapı hacmi yüksekliği “Sıralamayı Yazdır” ayarı nedeniyle azaltıldı."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Yapı Disk Bölümü"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "{0} yazıcısını kaldırmak istediğinizden emin misiniz? Bu işlem geri alınamaz!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Geçersiz kılınmadı"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Bilinmiyor"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Aşağıdaki yazıcı(lar) bir grubun parçası olmadıkları için bağlanamıyor"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Mevcut ağ yazıcıları"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Hazırla"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura Profili"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Özel profiller"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Tüm desteklenen türler ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Tüm Dosyalar (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Görsel"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Görsel profili, yüksek görsel ve yüzey kalitesi oluşturmak amacıyla, görsel prototipler ve modeller basılması için tasarlanmıştır."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Mühendislik profili, daha yüksek doğruluk ve daha yakın toleranslar sağlamak amacıyla, işlevsel prototipler ve son kullanım parçaları basılması için tasarlanmıştır."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Taslak"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Taslak profili, baskı süresinin önemli ölçüde kısaltılması amacıyla, birincil prototipler basılması ve konsept doğrulaması yapılması için tasarlanmıştır."
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Özel Malzeme"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289 /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "Özel"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Giriş başarısız"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Nesneler için yeni konum bulunuyor"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Konumu Buluyor"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Yapılan hacim içinde tüm nesneler için konum bulunamadı"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Konum Bulunamıyor"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "Yazıcılarla senkronize edilecek malzeme arşivi oluşturulamadı."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "Yazıcılarla senkronize etmek için malzeme arşivi oluşturulamadı."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "Digital Factory'den gelen yanıt bozuk görünüyor."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "Digital Factory'den gelen yanıtta önemli bilgiler eksik."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "Malzemeleri bazı yazıcılarla senkronize etmek için Digital Factory'ye bağlanılamadı."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "Digital Factory'ye bağlanılamadı."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Makineler yükleniyor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Tercihler ayarlanıyor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Etkin Makine Başlatılıyor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Makine yöneticisi başlatılıyor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Yapı hacmi başlatılıyor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Görünüm ayarlanıyor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Arayüz yükleniyor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Motor başlatılıyor..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Aynı anda yalnızca bir G-code dosyası yüklenebilir. {0} içe aktarma atlandı"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809 /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Uyarı"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "G-code yüklenirken başka bir dosya açılamaz. {0} içe aktarma atlandı"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Hata"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "Atla"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72 /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Kapat"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Sonraki"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290 /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "Bitir"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Ekle"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "İptal Et"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Grup #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Dış Duvar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "İç Duvarlar"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Yüzey Alanı"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Dolgu"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Destek Dolgusu"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Destek Arayüzü"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Destek"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Etek"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Astarlama Direği"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Hareket"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Geri Çekmeler"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Diğer"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37 /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "Sürüm notları açılamadı."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura başlatılamıyor"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>Ultimaker Cura doğru görünmeyen bir şeyle karşılaştı.</p></b>\n"
-"                    <p>Başlatma esnasında kurtarılamaz bir hata ile karşılaştık. Muhtemelen bazı hatalı yapılandırma dosyalarından kaynaklanıyordu. Yapılandırmanızı yedekleyip sıfırlamanızı öneriyoruz.</p>\n"
-"                    <p>Yedekler yapılandırma klasöründe bulunabilir.</p>\n"
-"                    <p>Sorunu düzeltmek için lütfen bu Çökme Raporunu bize gönderin.</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Çökme raporunu Ultimaker’a gönder"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Ayrıntılı çökme raporu göster"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Yapılandırma Klasörünü Göster"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Yapılandırmayı Yedekle ve Sıfırla"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Çökme Raporu"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Cura’da onarılamaz bir hata oluştu. Lütfen sorunu çözmek için bize Çökme Raporunu gönderin</p></b>\n"
-"            <p>Sunucularımıza otomatik olarak bir hata raporu yüklemek için lütfen \"Rapor gönder\" düğmesini kullanın</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Sistem bilgileri"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Bilinmiyor"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Cura sürümü"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Cura dili"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "İşletim sistemi dili"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Platform"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qt Sürümü"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQt Sürümü"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Henüz başlatılmadı<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGL Sürümü: {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL Satıcısı: {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL Oluşturucusu: {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Hata geri izleme"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Günlükler"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "Rapor gönder"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Yeni bir oturum açma işlemi başlatılamıyor. Başka bir aktif oturum açma girişimi olup olmadığını kontrol edin."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Ultimaker hesabı sunucusuna ulaşılamadı."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "Giriş başarısız"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "Sağlanan durum doğru değil."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "Hesap sunucusuyla kimlik doğrulaması yapılırken zaman aşımı oluştu."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Lütfen bu başvuruya yetki verirken gerekli izinleri verin."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Oturum açmaya çalışırken beklenmeyen bir sorun oluştu, lütfen tekrar deneyin."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Yanıt okunamadı."
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Nesneler çoğaltılıyor ve yerleştiriliyor"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Nesneler Yerleştiriliyor"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Nesne Yerleştiriliyor"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Desteklenmiyor"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Nozül"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Ayarlar, ekstrüderlerin mevcut kullanılabilirliğine uyacak şekilde değiştirildi:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Ayarlar güncellendi"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Ekstrüder(ler) Devre Dışı Bırakıldı"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Dosya Zaten Mevcut"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Dosya <filename>{0}</filename> zaten mevcut. Üstüne yazmak istediğinizden emin misiniz?"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459 /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "Geçersiz dosya URL’si:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Profilin <filename>{0}</filename> dosyasına aktarımı başarısız oldu: <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Profilin <filename>{0}</filename> dosyasına aktarımı başarısız oldu: Yazıcı eklentisinde rapor edilen hata."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Profil <filename>{0}</filename> dosyasına aktarıldı"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Dışa aktarma başarılı"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısız oldu: {1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Yazıcı eklenmeden önce profil, <filename>{0}</filename> dosyasından içe aktarılamaz."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "<filename>{0}</filename> dosyasında içe aktarılabilecek özel profil yok"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısız oldu:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Bu <filename>{0}</filename> profili yanlış veri içeriyor, içeri aktarılamadı."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısız oldu:"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "{0} profili başarıyla içe aktarıldı."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "Dosya {0} geçerli bir profil içermemekte."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Profil {0} öğesinde bilinmeyen bir dosya türü var veya profil bozuk."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Özel profil"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Profilde eksik bir kalite tipi var."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "Henüz etkin bir yazıcı yok."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "Profil eklenemiyor."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "'{0}' kalite tipi, mevcut aktif makine tanımı '{1}' ile uyumlu değil."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Uyarı: Profilin '{0}' kalite tipi, mevcut yapılandırma için kullanılabilir olmadığından profil görünür değil. Bu kalite tipini kullanabilen malzeme/nozül kombinasyonuna geçiş yapın."
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Model Başına Ayarlar"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Model Başına Ayarları Yapılandır"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura Profili"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D Dosyası"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Yedeklemeniz geri yüklenirken bir hata oluştu."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Yedeklemeler"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Yedeklemeniz yüklenirken bir hata oluştu."
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Yedeklemeniz oluşturuluyor..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Yedeklemeniz oluşturulurken bir hata oluştu."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Güncelleme bilgilerine erişilemedi."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Yedeklemeniz yükleniyor..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "{machine_name} cihazınız için yeni özellikler veya hata düzeltmeleri mevcut olabilir! Henüz son sürüme geçmediyseniz yazıcınızın donanım yazılımını {latest_version} sürümüne güncellemeniz önerilir."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Yedeklemenizin yüklenmesi tamamlandı."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "Yeni %s istikrarlı donanım yazılımı yayınlandı"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Yedekleme maksimum dosya boyutunu aşıyor."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Nasıl güncellenir"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Yedeklemeleri yönet"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Makine Ayarları"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Destek Engelleyici"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Desteklerin yazdırılmadığı bir hacim oluşturun."
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Çıkarılabilir Sürücü"
+msgid "Monitor"
+msgstr "Görüntüle"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Çıkarılabilir Sürücüye Kaydet"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Çıkarılabilir Sürücüye Kaydediliyor {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Yazılacak dosya biçimleri mevcut değil!"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Çıkarılabilir Sürücü <filename>{0}</filename> Üzerine Kaydediliyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Kaydediliyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "<filename>{0}</filename> dosyasına kaydedilemedi: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "{device} üzerine yazmaya çalışırken dosya adı bulunamadı."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Çıkarılabilir aygıta {0} kaydedilemedi: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Hata"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Çıkarılabilir Sürücüye {0}, {1} olarak kaydedildi"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Dosya Kaydedildi"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Çıkar"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Çıkarılabilir aygıtı çıkar {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Çıkarıldı {0}. Şimdi sürücüyü güvenle kaldırabilirsiniz."
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Donanımı Güvenli Bir Şekilde Kaldırın"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Çıkarma işlemi başarısız oldu {0}. Başka bir program sürücüyü kullanıyor olabilir."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Aygıt Yazılımını Güncelle"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 profilleri"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Önerilen Ayarlar"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Özel"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Proje dosyası <filename>{0}</filename> bilinmeyen bir makine tipi içeriyor: <message>{1}</message>. Makine alınamıyor. Bunun yerine modeller alınacak."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Proje Dosyası Aç"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "<filename>{0}</filename> proje dosyası aniden erişilemez oldu: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Proje Dosyası Açılamıyor"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "Proje dosyası <filename>{0}</filename> bozuk: <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "<filename>{0}</filename> proje dosyası, Ultimaker Cura'nın bu sürümünde bilinmeyen profiller kullanılarak yapılmış."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27 /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF Dosyası"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "UFP dosyasına yazamıyor:"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28 /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Biçim Paketi"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code dosyası"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Önizleme"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgen Görüntüsü"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Katmanlar İşleniyor"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Bilgi"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "Dilimleme işlemi beklenmeyen bir hatayla başarısız oldu. Lütfen sorun izleyicimizde hata bildirmeyi düşünün."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "Dilimleme başarısız"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "Hata bildirin"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "Ultimaker Cura'nın sorun izleyicisinde hata bildirin."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Mevcut malzeme, seçilen makine veya yapılandırma ile uyumlu olmadığından mevcut malzeme ile dilimlenemedi."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Dilimlenemedi"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Geçerli ayarlarla dilimlenemiyor. Şu ayarlarda hata var: {0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Modele özgü ayarlar nedeniyle dilimlenemedi. Şu ayarlar bir veya daha fazla modelde hataya yol açıyor: {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "İlk direk veya ilk konum(lar) geçersiz olduğu için dilimlenemiyor."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Etkisizleştirilmiş Extruder %s ile ilgili nesneler olduğundan dilimleme yapılamıyor."
+msgid "Warning"
+msgstr "Uyarı"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Lütfen ayarları gözden geçirin ve modellerinizi şu durumlara karşı kontrol edin:\n"
-"- Yapı hacmine sığma\n"
-"- Etkin bir ekstrüdere atanma\n"
-"- Değiştirici kafesler olarak ayarlanmama"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Çıkarılabilir Sürücü"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "AMF Dosyası"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17 /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Sıkıştırılmış G-code Dosyası"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Son İşleme"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-Code Öğesini Değiştir"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB yazdırma"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "USB ile yazdır"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "USB ile yazdır"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "USB ile bağlı"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Biçim Paketi"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USB’den yazdırma devam ediyor, Cura’yı kapatmanız bu yazdırma işlemini durduracak. Emin misiniz?"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Devam eden bir baskı var. Cura, önceki baskı tamamlanmadan USB aracılığıyla başka bir baskı işi başlatamaz."
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Baskı Sürüyor"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Hazırla"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-code ayrıştırma"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-code Ayrıntıları"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Dosya göndermeden önce g-code’un yazıcınız ve yazıcı yapılandırmanız için uygun olduğundan emin olun. G-code temsili doğru olmayabilir."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G Dosyası"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG Resmi"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG Resmi"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG Resmi"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP Resmi"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF Resmi"
+msgid "Per Model Settings"
+msgstr "Model Başına Ayarlar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Yapı levhasını dengele"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Model Başına Ayarları Yapılandır"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Yükseltmeleri seçin"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter yazı modunu desteklemez."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Güncelleme bilgilerine erişilemedi."
+msgid "Update Firmware"
+msgstr "Aygıt Yazılımını Güncelle"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "{machine_name} cihazınız için yeni özellikler veya hata düzeltmeleri mevcut olabilir! Henüz son sürüme geçmediyseniz yazıcınızın donanım yazılımını {latest_version} sürümüne güncellemeniz önerilir."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "Yeni %s istikrarlı donanım yazılımı yayınlandı"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Nasıl güncellenir"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "Örnek veri dosyası okunamıyor."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "Değişikliklerin etkili olması için {} uygulamasını kapatarak yeniden başlatmalısınız."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Senkronize ediliyor..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95 /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Ultimaker hesabınızda değişiklik tespit edildi"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Malzeme ve yazılım paketlerini hesabınızla senkronize etmek istiyor musunuz?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Senkronize et"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "Reddet ve hesaptan kaldır"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} eklenti indirilemedi"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "Reddet"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Kabul ediyorum"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Eklenti Lisans Anlaşması"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter metin dışı modu desteklemez."
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Lütfen dışa aktarmadan önce G-code'u hazırlayın."
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Kablo Yazdırma etkinleştirildiğinde Cura, katmanları doğru olarak görüntülemez."
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura, henüz {0} grubunun ana yazıcısına yüklenmemiş malzeme profilleri tespit etti."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Simülasyon Görünümü"
+msgid "Sending materials to printer"
+msgstr "Malzemeler yazıcıya gönderiliyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Önce dilimleme yapmanız gerektiğinden hiçbir şey gösterilmez."
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "{0} ile bağlantı kurmayı deniyorsunuz ancak cihaz bir grubun ana makinesi değil. Bu cihazı grup ana makinesi olarak yapılandırmak için web sayfasını ziyaret edebilirsiniz."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Görüntülenecek katman yok"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Bu mesajı bir daha gösterme"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Katman görünümü"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Ağ üzerinden yazdır"
+msgid "Not a group host"
+msgstr "Grup ana makinesi değil"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Ağ üzerinden yazdır"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Grubu yapılandır"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Ağ üzerinden bağlandı"
+msgid "Sending Print Job"
+msgstr "Yazdırma İşi Gönderiliyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "yarın"
+msgid "Uploading print job to printer."
+msgstr "Baskı işi yazıcıya yükleniyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "bugün"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "Baskı işi kuyruğu dolu. Yazıcı yeni iş kabul edemez."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Ağ ile Bağlan"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "Kuyruk Dolu"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Mevcut iş gönderilene kadar bekleyin."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Baskı hatası"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Yazdırma işi yazıcıya başarıyla gönderildi."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Veri Gönderildi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Ultimaker Connect çalıştırmayan bir yazıcıya bağlanmaya çalışıyorsunuz. Lütfen yazıcının donanım yazılımını son sürüme güncelleyin."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Yazıcınızı güncelleyin"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "Baskı işi kuyruğu dolu. Yazıcı yeni iş kabul edemez."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "Kuyruk Dolu"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Yazdırma İşi Gönderiliyor"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Baskı işi yazıcıya yükleniyor."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura, henüz {0} grubunun ana yazıcısına yüklenmemiş malzeme profilleri tespit etti."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Malzemeler yazıcıya gönderiliyor"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Veri yazıcıya yüklenemedi."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Ağ hatası"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "{0} ile bağlantı kurmayı deniyorsunuz ancak cihaz bir grubun ana makinesi değil. Bu cihazı grup ana makinesi olarak yapılandırmak için web sayfasını ziyaret edebilirsiniz."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Grup ana makinesi değil"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Grubu yapılandır"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1447,66 +296,85 @@ msgstr ""
 "<b>{printer_name}</b> adlı yazıcınız bulut aracılığıyla bağlanamadı.\n"
 " Baskı kuyruğunuzu yönetin ve yazıcınızı Digital Factory'ye bağlayarak baskılarınızı dilediğiniz yerden takip edin"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "Buluttan yazdırma için hazır mısınız?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "Başlayın"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "Daha fazla bilgi edinin"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Bulut üzerinden yazdır"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Ultimaker Connect çalıştırmayan bir yazıcıya bağlanmaya çalışıyorsunuz. Lütfen yazıcının donanım yazılımını son sürüme güncelleyin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Yazıcınızı güncelleyin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Veri yazıcıya yüklenemedi."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Ağ hatası"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Ağ üzerinden yazdır"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Bulut üzerinden yazdır"
+msgid "Print over network"
+msgstr "Ağ üzerinden yazdır"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Bulut üzerinden bağlı"
+msgid "Connected over the network"
+msgstr "Ağ üzerinden bağlandı"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "Baskı izleme"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "yarın"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "Ultimaker Digital Factory'de baskıyı izleyin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "bugün"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Baskı işi yüklenirken bilinmeyen hata kodu: {0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Ağ ile Bağlan"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Ultimaker hesabınızdan yeni yazıcı tespit edildi"
 msgstr[1] "Ultimaker hesabınızdan yeni yazıcılar tespit edildi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "{name} yazıcısı ({model}) hesabınızdan ekleniyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1514,70 +382,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... ve {0} diğeri"
 msgstr[1] "... ve {0} diğeri"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Digital Factory'den eklenen yazıcılar:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Yazıcı için kullanılabilir bulut bağlantısı yok"
 msgstr[1] "Bazı yazıcılar için kullanılabilir bulut bağlantısı yok"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Bu yazıcı Digital Factory ile bağlantılandırılmamış:"
 msgstr[1] "Bu yazıcılar Digital Factory ile bağlantılandırılmamış:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Bağlantı kurmak için lütfen {website_link} adresini ziyaret edin"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Yazıcı yapılandırmalarını koru"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Yazıcıları kaldır"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} yazıcısı bir sonraki hesap senkronizasyonuna kadar kaldırılacak."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "{printer_name} yazıcısını kalıcı olarak kaldırmak için {digital_factory_link} adresini ziyaret edin"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "{printer_name} yazıcısını geçici olarak kaldırmak istediğinizden emin misiniz?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Yazıcılar kaldırılsın mı?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1593,7 +462,7 @@ msgstr[1] ""
 "{0} yazıcıyı Cura'dan kaldırmak üzeresiniz. Bu işlem geri alınamaz.\n"
 "Devam etmek istediğinizden emin misiniz?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1602,2012 +471,3124 @@ msgstr ""
 "Tüm yazıcıları Cura'dan kaldırmak üzeresiniz. Bu işlem geri alınamaz.\n"
 "Devam etmek istediğinizden emin misiniz?"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Bulut üzerinden yazdır"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Bulut üzerinden yazdır"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Bulut üzerinden bağlı"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "Baskı izleme"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "Ultimaker Digital Factory'de baskıyı izleyin"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Baskı işi yüklenirken bilinmeyen hata kodu: {0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D Model Yardımcısı"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "Vurgulanan alanlar, eksik ya da ikincil yüzeyleri gösterir. Modelinizi düzeltin ve Cura'da tekrar açın."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Model boyutu ve model yapılandırması nedeniyle bir veya daha fazla 3D model optimum yazdırılamayabilir:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>En iyi kalite ve güvenilirliği nasıl elde edeceğinizi öğrenin.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Yazdırma kalitesi kılavuzunu görüntüleyin</a></p>"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Kablo Yazdırma etkinleştirildiğinde Cura, katmanları doğru olarak görüntülemez."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "Model hataları"
+msgid "Simulation View"
+msgstr "Simülasyon Görünümü"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Gerçek görünüm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Önce dilimleme yapmanız gerektiğinden hiçbir şey gösterilmez."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Görüntülenecek katman yok"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Bu mesajı bir daha gösterme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Katman görünümü"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter metin dışı modu desteklemez."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Lütfen dışa aktarmadan önce G-code'u hazırlayın."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code dosyası"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "3mf dosyasını yazarken hata oluştu."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "3MF Writer eklentisi bozuk."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "Henüz yazılacak bir çalışma alanı yok. Lütfen önce bir yazıcı ekleyin."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Burada çalışma alanını yazmak için izin yok."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "İşletim sistemi, proje dosyalarının bu konuma veya bu dosya adıyla kaydedilmesine izin vermiyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "3MF dosyası"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Cura Projesi 3MF dosyası"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Görüntüle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Sıkıştırılmış G-code Dosyası"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "Dilimleme işlemi beklenmeyen bir hatayla başarısız oldu. Lütfen sorun izleyicimizde hata bildirmeyi düşünün."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "Dilimleme başarısız"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "Hata bildirin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "Ultimaker Cura'nın sorun izleyicisinde hata bildirin."
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Mevcut malzeme, seçilen makine veya yapılandırma ile uyumlu olmadığından mevcut malzeme ile dilimlenemedi."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D Model Yardımcısı"
+msgid "Unable to slice"
+msgstr "Dilimlenemedi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Geçerli ayarlarla dilimlenemiyor. Şu ayarlarda hata var: {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Modele özgü ayarlar nedeniyle dilimlenemedi. Şu ayarlar bir veya daha fazla modelde hataya yol açıyor: {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "İlk direk veya ilk konum(lar) geçersiz olduğu için dilimlenemiyor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Etkisizleştirilmiş Extruder %s ile ilgili nesneler olduğundan dilimleme yapılamıyor."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>Model boyutu ve model yapılandırması nedeniyle bir veya daha fazla 3D model optimum yazdırılamayabilir:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>En iyi kalite ve güvenilirliği nasıl elde edeceğinizi öğrenin.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Yazdırma kalitesi kılavuzunu görüntüleyin</a></p>"
+"Lütfen ayarları gözden geçirin ve modellerinizi şu durumlara karşı kontrol edin:\n"
+"- Yapı hacmine sığma\n"
+"- Etkin bir ekstrüdere atanma\n"
+"- Değiştirici kafesler olarak ayarlanmama"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Ağ Tipi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Katmanlar İşleniyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Normal model"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Bilgi"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Destek olarak yazdır"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D Dosyası"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Çakışma ayarlarını değiştir"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG Resmi"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Çakışmaları destekleme"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG Resmi"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "Yalnızca dolgu kafes"
+msgid "PNG Image"
+msgstr "PNG Resmi"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "Kesme Örgüsü"
+msgid "BMP Image"
+msgstr "BMP Resmi"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Ayarları seçin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF Resmi"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Bu modeli Özelleştirmek için Ayarları seçin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Nozül"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtrele..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Proje dosyası <filename>{0}</filename> bilinmeyen bir makine tipi içeriyor: <message>{1}</message>. Makine alınamıyor. Bunun yerine modeller alınacak."
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Tümünü göster"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Proje Dosyası Aç"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura Yedeklemeleri"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "<filename>{0}</filename> proje dosyası aniden erişilemez oldu: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura Sürümü"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Proje Dosyası Açılamıyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Makineler"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "Proje dosyası <filename>{0}</filename> bozuk: <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Malzemeler"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "<filename>{0}</filename> proje dosyası, Ultimaker Cura'nın bu sürümünde bilinmeyen profiller kullanılarak yapılmış."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profiller"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Önerilen Ayarlar"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Eklentiler"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Özel"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Daha fazla seçenek görüntülemek ister misiniz?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "3MF Dosyası"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Şimdi Yedekle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "UFP dosyasına yazamıyor:"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Otomatik Yedekle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 profilleri"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Cura’nın başlatıldığı günlerde otomatik olarak yedekleme yapar."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Yedeklemeler"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Geri Yükle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Yedeklemeniz yüklenirken bir hata oluştu."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Yedeklemeyi Sil"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Yedeklemeniz oluşturuluyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Bu yedeklemeyi silmek istediğinizden emin misiniz? Bu eylem geri alınamaz."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Yedeklemeniz oluşturulurken bir hata oluştu."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Yedeklemeyi Geri Yükle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Yedeklemeniz yükleniyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Yedeklemeniz geri yüklenmeden öne Cura’yı yeniden başlatmalısınız. Cura’yı şimdi kapatmak istiyor musunuz?"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Yedeklemenizin yüklenmesi tamamlandı."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Cura ayarlarınızı yedekleyin ve senkronize edin."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Yedekleme maksimum dosya boyutunu aşıyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Giriş yap"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Yedeklemeleri yönet"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Yedeklemelerim"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "Yedekle"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Şu anda yedeklemeniz yok. Oluşturmak için “Şimdi Yedekle” düğmesini kullanın."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Yedeklemeniz geri yüklenirken bir hata oluştu."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Önizleme aşamasında en fazla 5 yedekleme görüntüleyebilirsiniz. Önceki yedeklemeleri görmek için mevcut yedeklemelerden birini kaldırın."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "Örnek veri dosyası okunamıyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Yazıcı Ayarları"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter yazı modunu desteklemez."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Genişlik)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Son İşleme"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-Code Öğesini Değiştir"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Derinlik)"
+msgid "Support Blocker"
+msgstr "Destek Engelleyici"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Yükseklik)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Desteklerin yazdırılmadığı bir hacim oluşturun."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Yapı levhası şekli"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Önizleme"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Merkez nokta"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Röntgen Görüntüsü"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Isıtılmış yatak"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Yapı levhasını dengele"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Isıtılmış yapı hacmi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Yükseltmeleri seçin"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-code türü"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Yazıcı Başlığı Ayarları"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X maks"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y maks"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Portal Yüksekliği"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Ekstrüder Sayısı"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "Ekstrüder ofsetlerini GCode'a uygula"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "Vurgulanan alanlar, eksik ya da ikincil yüzeyleri gösterir. Modelinizi düzeltin ve Cura'da tekrar açın."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-code’u Başlat"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "Model hataları"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-code’u Sonlandır"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "Daha fazla bilgi edinin"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Nozül Ayarları"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Gerçek görünüm"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Nozzle boyutu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-code ayrıştırma"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Uyumlu malzeme çapı"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-code Ayrıntıları"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Nozül X ofseti"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Dosya göndermeden önce g-code’un yazıcınız ve yazıcı yapılandırmanız için uygun olduğundan emin olun. G-code temsili doğru olmayabilir."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Nozül Y ofseti"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G Dosyası"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Soğutma Fanı Numarası"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Makine Ayarları"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Ekstruder G-Code'u Başlatma"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB yazdırma"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Ekstruder G-Code'u Sonlandırma"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "USB ile yazdır"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Yazıcı"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "USB ile yazdır"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Aygıt Yazılımını Güncelle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "USB ile bağlı"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "Aygıt yazılımı doğrudan 3B yazıcı üzerinden çalışan bir yazılım parçasıdır. Bu aygıt yazılımı adım motorlarını kontrol eder, sıcaklığı düzenler ve sonunda yazıcının çalışmasını sağlar."
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USB’den yazdırma devam ediyor, Cura’yı kapatmanız bu yazdırma işlemini durduracak. Emin misiniz?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Devam eden bir baskı var. Cura, önceki baskı tamamlanmadan USB aracılığıyla başka bir baskı işi başlatamaz."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Baskı Sürüyor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Makineler yükleniyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Tercihler ayarlanıyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Etkin Makine Başlatılıyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Makine yöneticisi başlatılıyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Yapı hacmi başlatılıyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Görünüm ayarlanıyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Arayüz yükleniyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Motor başlatılıyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Aynı anda yalnızca bir G-code dosyası yüklenebilir. {0} içe aktarma atlandı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "G-code yüklenirken başka bir dosya açılamaz. {0} içe aktarma atlandı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "Yeni yazıcıları olan aygıt yazılımı gönderimi yararlı olmaktadır, ancak yeni sürümler daha fazla özellik ve geliştirmeye eğilimlidir."
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Aygıt Yazılımını otomatik olarak yükselt"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Görsel"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Özel Aygıt Yazılımı Yükle"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Görsel profili, yüksek görsel ve yüzey kalitesi oluşturmak amacıyla, görsel prototipler ve modeller basılması için tasarlanmıştır."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "Yazıcı ile bağlantı kurulmadığı için aygıt yazılımı güncellenemiyor."
+msgid "Engineering"
+msgstr "Engineering"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Mühendislik profili, daha yüksek doğruluk ve daha yakın toleranslar sağlamak amacıyla, işlevsel prototipler ve son kullanım parçaları basılması için tasarlanmıştır."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "Yazıcı bağlantısı aygıt yazılımını yükseltmeyi desteklemediği için aygıt yazılımı güncellenemiyor."
+msgid "Draft"
+msgstr "Taslak"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Özel aygıt yazılımı seçin"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Taslak profili, baskı süresinin önemli ölçüde kısaltılması amacıyla, birincil prototipler basılması ve konsept doğrulaması yapılması için tasarlanmıştır."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Aygıt Yazılımı Güncellemesi"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Geçersiz kılınmadı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "{0} yazıcısını kaldırmak istediğinizden emin misiniz? Bu işlem geri alınamaz!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Aygıt yazılımı güncelleniyor."
+msgid "Unknown"
+msgstr "Bilinmiyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Aygıt yazılımı güncellemesi tamamlandı."
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Aşağıdaki yazıcı(lar) bir grubun parçası olmadıkları için bağlanamıyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Bilinmeyen bir hata nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
+msgid "Available networked printers"
+msgstr "Mevcut ağ yazıcıları"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Hesaplanmış"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "Lütfen baskıya başlamadan önce malzeme profillerini yazıcılarınızla senkronize edin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "Yeni malzemeler yüklendi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Bir iletişim hatası nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
+msgid "Custom Material"
+msgstr "Özel Malzeme"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Bir girdi/çıktı hatası nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
+msgid "Custom"
+msgstr "Özel"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Eksik aygıt yazılımı nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
+msgid "Custom profiles"
+msgstr "Özel profiller"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Proje Aç"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Tüm desteklenen türler ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Var olanları güncelleştir"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Tüm Dosyalar (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Yeni oluştur"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "Yazıcılarla senkronize edilecek malzeme arşivi oluşturulamadı."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Özet - Cura Projesi"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "Yazıcılarla senkronize etmek için malzeme arşivi oluşturulamadı."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Yazıcı ayarları"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "Digital Factory'den gelen yanıt bozuk görünüyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Makinedeki çakışma nasıl çözülmelidir?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "Digital Factory'den gelen yanıtta önemli bilgiler eksik."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tür"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "Malzemeleri bazı yazıcılarla senkronize etmek için Digital Factory'ye bağlanılamadı."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Yazıcı Grubu"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "Digital Factory'ye bağlanılamadı."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profil ayarları"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Kullanıcı veri dizininden arşiv oluşturulamadı: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Profildeki çakışma nasıl çözülmelidir?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Uygun veri veya meta veri olmadan Cura yedeği geri yüklenmeye çalışıldı."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "İsim"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Geçerli sürümünüzden yüksek bir sürüme sahip bir Cura yedeği geri yüklenmeye çalışıldı."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "Cura yedeklemesi geri yüklenmeye çalışılırken aşağıdaki hata oluştu:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Profilde değil"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Nesneler için yeni konum bulunuyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 geçersiz kılma"
-msgstr[1] "%1 geçersiz kılmalar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Konumu Buluyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Kaynağı"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Yapılan hacim içinde tüm nesneler için konum bulunamadı"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 geçersiz kılma"
-msgstr[1] "%1, %2 geçersiz kılmalar"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "Konum Bulunamıyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Malzeme ayarları"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "Giriş başarısız"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Malzemedeki çakışma nasıl çözülmelidir?"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Dış Duvar"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Görünürlük ayarı"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "İç Duvarlar"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mod"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Yüzey Alanı"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Görünür ayarlar:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Dolgu"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 / %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Destek Dolgusu"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Bir projenin yüklenmesi derleme levhasındaki tüm modelleri siler."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Destek Arayüzü"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Aç"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Destek"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Son İşleme Uzantısı"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Etek"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Son İşleme Dosyaları"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Astarlama Direği"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Dosya ekle"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Hareket"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Geri Çekmeler"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Diğer"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "Ayarlar"
+msgid "Group #{group_nr}"
+msgstr "Grup #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "Etkin ileri işleme komut dosyalarını değiştirin."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "Sürüm notları açılamadı."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "Aşağıdaki komut dosyası etkin:"
-msgstr[1] "Aşağıdaki komut dosyaları etkin:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "Atla"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Resim Dönüştürülüyor..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Kapat"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Her bir pikselin “Taban”dan en yüksek mesafesi."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Ekle"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Yükseklik (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Bitir"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Tabanın yapı levhasından milimetre cinsinden yüksekliği."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "İptal Et"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Taban (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Sonraki"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Yapı levhasındaki milimetre cinsinden genişlik."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Portalın yazdırılan modeller ile çarpışmasını önlemek için yapı hacmi yüksekliği “Sıralamayı Yazdır” ayarı nedeniyle azaltıldı."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Genişlik (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Yapı Disk Bölümü"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Yapı levhasındaki milimetre cinsinden derinlik"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "Malzeme arşivi {} konumuna kaydedilemedi:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Derinlik (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "Malzeme arşivi kaydedilemedi"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Litofanlar için, daha fazla ışığın girmesini engellemek amacıyla koyu renk pikseller daha kalın olan bölgelere denk gelmelidir. Yükseklik haritaları için daha açık renk pikseller daha yüksek araziyi ifade eder; bu nedenle daha açık renk piksellerin oluşturulan 3D modelde daha kalın bölgelere denk gelmesi gerekir."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "Bilinmeyen hata."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Daha koyu olan daha yüksek"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "Dosya Zaten Mevcut"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Daha açık olan daha yüksek"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Dosya <filename>{0}</filename> zaten mevcut. Üstüne yazmak istediğinizden emin misiniz?"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Litofanlar için yarı saydamlık sağlayacak basit bir logaritmik model bulunur. Yükseklik haritaları için piksel değerleri doğrusal yüksekliklere karşılık gelir."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "Geçersiz dosya URL’si:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Doğrusal"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Desteklenmiyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Yarı saydamlık"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "1 milimetre kalınlığında bir baskıya nüfuz eden ışığın yüzdesi. Bu değerin düşürülmesi karanlık bölgelerdeki kontrastı arttırır ve görüntünün açık bölgelerindeki kontrastı azaltır."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Ayarlar, ekstrüderlerin mevcut kullanılabilirliğine uyacak şekilde değiştirildi:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1 mm Geçirgenlik (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Ayarlar güncellendi"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Resme uygulanacak düzeltme miktarı."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Ekstrüder(ler) Devre Dışı Bırakıldı"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Düzeltme"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Profilin <filename>{0}</filename> dosyasına aktarımı başarısız oldu: <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "Tamam"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Profilin <filename>{0}</filename> dosyasına aktarımı başarısız oldu: Yazıcı eklentisinde rapor edilen hata."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Lütfen Ultimaker Original’e yapılan herhangi bir yükseltmeyi seçin"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Profil <filename>{0}</filename> dosyasına aktarıldı"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Isıtılmış Yapı Levhası (orijinal donanım veya şahsen yapılan)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Dışa aktarma başarılı"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Yapı Levhası Dengeleme"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısız oldu: {1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Baskılarınızın düzgün çıktığından emin olmak için yapı levhanızı ayarlayabilirsiniz. “Sonraki Konuma Taşı” seçeneğine tıkladığınızda, nozül ayarlanabilen farklı konumlara taşınacak."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Yazıcı eklenmeden önce profil, <filename>{0}</filename> dosyasından içe aktarılamaz."
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Her konum için nozülün altına bir kağıt yerleştirin ve yazdırma yapı levhasının yüksekliğini ayarlayın. Kağıt nozülün ucundan yavaşça geçerse yazdırma yapı levhasının yüksekliği doğrudur."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "<filename>{0}</filename> dosyasında içe aktarılabilecek özel profil yok"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Yapı Levhasını Dengelemeyi Başlat"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısız oldu:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Sonraki Konuma Taşı"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Bu <filename>{0}</filename> profili yanlış veri içeriyor, içeri aktarılamadı."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Anonim veri toplama hakkında daha fazla bilgi"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısız oldu:"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura, yazdırma kalitesini ve kullanıcı deneyimini iyileştirmek için anonim veri toplar. Aşağıda, paylaşılan tüm verilerin bir örneği verilmiştir:"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "{0} profili başarıyla içe aktarıldı."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Anonim veri göndermek istemiyorum"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "Dosya {0} geçerli bir profil içermemekte."
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Anonim veri gönderilmesine izin ver"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Profil {0} öğesinde bilinmeyen bir dosya türü var veya profil bozuk."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Mağaza"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Özel profil"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Pakette değişikliklerin geçerli olması için Cura’yı yeniden başlatmalısınız."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Profilde eksik bir kalite tipi var."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "%1 uygulamasından çık"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "Henüz etkin bir yazıcı yok."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "Yükle"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "Profil eklenemiyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Yüklü"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "'{0}' kalite tipi, mevcut aktif makine tanımı '{1}' ile uyumlu değil."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "Uyarı: Profilin '{0}' kalite tipi, mevcut yapılandırma için kullanılabilir olmadığından profil görünür değil. Bu kalite tipini kullanabilen malzeme/nozül kombinasyonuna geçiş yapın."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Web Mağazasına Git"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "Nesneler çoğaltılıyor ve yerleştiriliyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Malzeme ara"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Nesneler Yerleştiriliyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Uyumluluk"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Nesne Yerleştiriliyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Makine"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Yeni bir oturum açma işlemi başlatılamıyor. Başka bir aktif oturum açma girişimi olup olmadığını kontrol edin."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Baskı tepsisi"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Ultimaker hesabı sunucusuna ulaşılamadı."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Destek"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "Giriş başarısız"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Kalite"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Yanıt okunamadı."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Teknik Veri Sayfası"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "Sağlanan durum doğru değil."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Güvenlik Veri Sayfası"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "Hesap sunucusuyla kimlik doğrulaması yapılırken zaman aşımı oluştu."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Yazdırma Talimatları"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Lütfen bu başvuruya yetki verirken gerekli izinleri verin."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Web sitesi"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Oturum açmaya çalışırken beklenmeyen bir sorun oluştu, lütfen tekrar deneyin."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "Yükleme ve güncelleme yapabilmek için <a href='%1'>oturum açın</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura başlatılamıyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Malzeme makarası satın al</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Ultimaker Cura doğru görünmeyen bir şeyle karşılaştı.</p></b>\n"
+"                    <p>Başlatma esnasında kurtarılamaz bir hata ile karşılaştık. Muhtemelen bazı hatalı yapılandırma dosyalarından kaynaklanıyordu. Yapılandırmanızı yedekleyip sıfırlamanızı öneriyoruz.</p>\n"
+"                    <p>Yedekler yapılandırma klasöründe bulunabilir.</p>\n"
+"                    <p>Sorunu düzeltmek için lütfen bu Çökme Raporunu bize gönderin.</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "Güncelle"
+msgid "Send crash report to Ultimaker"
+msgstr "Çökme raporunu Ultimaker’a gönder"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Güncelleniyor"
+msgid "Show detailed crash report"
+msgstr "Ayrıntılı çökme raporu göster"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Güncellendi"
+msgid "Show configuration folder"
+msgstr "Yapılandırma Klasörünü Göster"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Geri"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Eklentiler"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Malzemeler"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Yüklü"
+msgid "Backup and Reset Configuration"
+msgstr "Yapılandırmayı Yedekle ve Sıfırla"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Yeniden başlatıldığında kurulacak"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Çökme Raporu"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "Güncelleme yapabilmek için <a href='%1'>oturum açın</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Cura’da onarılamaz bir hata oluştu. Lütfen sorunu çözmek için bize Çökme Raporunu gönderin</p></b>\n"
+"            <p>Sunucularımıza otomatik olarak bir hata raporu yüklemek için lütfen \"Rapor gönder\" düğmesini kullanın</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Eski Sürümü Yükle"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Sistem bilgileri"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Kaldır"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Bilinmiyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Topluluk Katkıları"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Cura sürümü"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Topluluk Eklentileri"
+msgid "Cura language"
+msgstr "Cura dili"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Genel Materyaller"
+msgid "OS language"
+msgstr "İşletim sistemi dili"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Paketler alınıyor..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Platform"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "Web sitesi"
+msgid "Qt version"
+msgstr "Qt Sürümü"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "E-posta"
+msgid "PyQt version"
+msgstr "PyQt Sürümü"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Ultimaker Cura Enterprise için onaylı eklenti ve malzemeleri almak için lütfen oturum açın"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "Sürüm"
+msgid "Not yet initialized<br/>"
+msgstr "Henüz başlatılmadı<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Son güncelleme"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGL Sürümü: {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marka"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL Satıcısı: {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "İndirmeler"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL Oluşturucusu: {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Yüklü eklentiler"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Hata geri izleme"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Hiç eklenti yüklenmedi."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Günlükler"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Yüklü malzemeler"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Rapor gönder"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Hiç malzeme yüklenmedi."
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Lütfen yazıcınızda bağlantı olduğundan emin olun:\n"
+"- Yazıcının açık olup olmadığını kontrol edin.\n"
+"- Yazıcının ağa bağlı olup olmadığını kontrol edin.\n"
+"- Buluta bağlı yazıcıları keşfetmek için giriş yapıp yapmadığınızı kontrol edin."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Paketli eklentiler"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Lütfen yazıcınızı ağa bağlayın."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Paketli malzemeler"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Kullanım kılavuzlarını çevrimiçi olarak görüntüle"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Cura Paket veri tabanına bağlanılamadı. Lütfen bağlantınızı kontrol edin."
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "Baskınızı Cura üzerinden izlemek için lütfen yazıcıyı bağlayın."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Paketi yüklemek için lisansı kabul etmeniz gerekir"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Bu modeli Özelleştirmek için Ayarları seçin"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Hesabınızda değişiklik var"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtrele..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Kapat"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Tümünü göster"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "Sonraki"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Ağ Tipi"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Aşağıdaki paketler eklenecek:"
+msgid "Normal model"
+msgstr "Normal model"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Aşağıdaki paketler uyumsuz Cura sürümü nedeniyle yüklenemiyor:"
+msgid "Print as support"
+msgstr "Destek olarak yazdır"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Kaldırmayı onayla"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "Çakışma ayarlarını değiştir"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Kullanımda olan materyalleri ve/veya profilleri kaldırıyorsunuz. Onay verirseniz aşağıdaki materyaller/profiller varsayılan değerlerine sıfırlanacaktır."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "Çakışmaları destekleme"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Malzemeler"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "Yalnızca dolgu kafes"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profiller"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "Kesme Örgüsü"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Onayla"
+msgid "Select settings"
+msgstr "Ayarları seçin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Aygıt Yazılımını Güncelle"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Renk şeması"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "Aygıt yazılımı doğrudan 3B yazıcı üzerinden çalışan bir yazılım parçasıdır. Bu aygıt yazılımı adım motorlarını kontrol eder, sıcaklığı düzenler ve sonunda yazıcının çalışmasını sağlar."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Malzeme Rengi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "Yeni yazıcıları olan aygıt yazılımı gönderimi yararlı olmaktadır, ancak yeni sürümler daha fazla özellik ve geliştirmeye eğilimlidir."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Çizgi Tipi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Aygıt Yazılımını otomatik olarak yükselt"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Hız"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Özel Aygıt Yazılımı Yükle"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "Katman kalınlığı"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "Yazıcı ile bağlantı kurulmadığı için aygıt yazılımı güncellenemiyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "Hat Genişliği"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "Yazıcı bağlantısı aygıt yazılımını yükseltmeyi desteklemediği için aygıt yazılımı güncellenemiyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "Akış"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Özel aygıt yazılımı seçin"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Uyumluluk Modu"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Aygıt Yazılımı Güncellemesi"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "Geçişler"
+msgid "Updating firmware."
+msgstr "Aygıt yazılımı güncelleniyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Yardımcılar"
+msgid "Firmware update completed."
+msgstr "Aygıt yazılımı güncellemesi tamamlandı."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "Kabuk"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Bilinmeyen bir hata nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "Dolgu"
+msgid "Firmware update failed due to an communication error."
+msgstr "Bir iletişim hatası nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "Başlangıçlar"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Bir girdi/çıktı hatası nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Yalnızca Üst Katmanları Göster"
+msgid "Firmware update failed due to missing firmware."
+msgstr "Eksik aygıt yazılımı nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "En Üstteki 5 Ayrıntılı Katmanı Göster"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Durduruldu"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Üst / Alt"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Tamamlandı"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "İç Duvar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Hazırlanıyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "min"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "İptal ediliyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "maks"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "Başarısız"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Duraklatılıyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Duraklatıldı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Devam ediliyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Eylem gerekli"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "%1 bitiş tarihi: %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Yazıcıyı yönet"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "Cam"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Kuyruğu uzaktan yönetmek için lütfen yazıcının donanım yazılımını güncelleyin."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "Bulut yazıcıları için web kamerası akışları Ultimaker Cura'dan görüntülenemez. Ultimaker Digital Factory'i ziyaret etmek ve bu web kamerasını görüntülemek için \"Yazıcıyı Yönet\"i tıklayın."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Yükleniyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Mevcut değil"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Ulaşılamıyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Boşta"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Hazırlanıyor..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Yazdırma"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Başlıksız"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonim"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Yapılandırma değişiklikleri gerekiyor"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Detaylar"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Kullanım dışı yazıcı"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "İlk kullanılabilen"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Kuyrukta"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Tarayıcıda yönet"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Kuyrukta baskı işi yok. Bir iş eklemek için dilimleme yapın ve gönderin."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Yazdırma görevleri"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Toplam yazdırma süresi"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Bekleniyor"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Ağ üzerinden yazdır"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Yazdır"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Yazıcı seçimi"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "Yapılandırma Değişiklikleri"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "Geçersiz kıl"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "Atanan yazıcı %1, şu yapılandırma değişikliğini gerektiriyor:"
 msgstr[1] "Atanan yazıcı %1, şu yapılandırma değişikliklerini gerektiriyor:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "Yazıcı %1 atandı, fakat iş bilinmeyen bir malzeme yapılandırması içeriyor."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "%2 olan %1 malzemesini %3 yapın."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "%3 malzemesini %1 malzemesi olarak yükleyin (Bu işlem geçersiz kılınamaz)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "%2 olan %1 print core'u %3 yapın."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "Baskı tablasını %1 olarak değiştirin (Bu işlem geçersiz kılınamaz)."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Geçersiz kıl seçeneği mevcut yazıcı yapılandırmasındaki ayarları kullanacaktır. Yazdırma işlemi başarısız olabilir."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "Alüminyum"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Tamamlandı"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "İptal ediliyor..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Durduruldu"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "Başarısız"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Duraklatılıyor..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Duraklatıldı"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Devam ediliyor..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Ağ üzerinden yazdır"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Eylem gerekli"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Yazdır"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "%1 bitiş tarihi: %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "Yazıcı seçimi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Ağ Yazıcısına Bağlan"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Yazıcınıza ağ üzerinden doğrudan baskı göndermek için lütfen yazıcınızın ağ kablosuyla ağa bağlı olduğundan veya yazıcınızı WiFi ağınıza bağladığınızdan emin olun. Yazıcınız ile Cura'ya bağlanamıyorsanız g-code dosyalarını yazıcınıza aktarmak için USB sürücüsü kullanabilirsiniz."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Aşağıdaki listeden yazıcınızı seçin:"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Düzenle"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Kaldır"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Yenile"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Yazıcınız listede yoksa <a href='%1'>ağ yazdırma sorun giderme kılavuzunu</a> okuyun"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tür"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Üretici yazılımı sürümü"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adres"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Bu yazıcı, bir yazıcı grubunu barındırmak için ayarlı değildir."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Bu yazıcı, %1 yazıcı grubunun ana makinesidir."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Bu adresteki yazıcı henüz yanıt vermedi."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Bağlan"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Geçersiz IP adresi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Lütfen geçerli bir IP adresi girin."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Yazıcı Adresi"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Ağdaki yazıcınızın IP adresini girin."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "Kullanım dışı yazıcı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "İlk kullanılabilen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "En üste taşı"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Sil"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "Devam et"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Duraklatılıyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Devam ediliyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "Duraklat"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "İptal ediliyor..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Durdur"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "%1 öğesini kuyruğun en üstüne taşımak ister misiniz?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Yazdırma işini en üste taşı"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "%1 öğesini silmek istediğinizden emin misiniz?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Yazdırma işini sil"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "%1 öğesini durdurmak istediğinizden emin misiniz?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Yazdırmayı durdur"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "Kuyrukta"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Tarayıcıda yönet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Kuyrukta baskı işi yok. Bir iş eklemek için dilimleme yapın ve gönderin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Yazdırma görevleri"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Toplam yazdırma süresi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Bekleniyor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "Renk şeması"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Malzeme Rengi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Çizgi Tipi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Hız"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "Katman kalınlığı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "Hat Genişliği"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "Akış"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Uyumluluk Modu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "Geçişler"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Yardımcılar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "Kabuk"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Dolgu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "Başlangıçlar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "Yalnızca Üst Katmanları Göster"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "En Üstteki 5 Ayrıntılı Katmanı Göster"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "Üst / Alt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "İç Duvar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "min"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "maks"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"Lütfen yazıcınızda bağlantı olduğundan emin olun:\n"
-"- Yazıcının açık olup olmadığını kontrol edin.\n"
-"- Yazıcının ağa bağlı olup olmadığını kontrol edin.\n"
-"- Buluta bağlı yazıcıları keşfetmek için giriş yapıp yapmadığınızı kontrol edin."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Lütfen yazıcınızı ağa bağlayın."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Yükseklik (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Kullanım kılavuzlarını çevrimiçi olarak görüntüle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Her bir pikselin “Taban”dan en yüksek mesafesi."
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "Baskınızı Cura üzerinden izlemek için lütfen yazıcıyı bağlayın."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Taban (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Bu yazdırmada bazı şeyler sorunlu olabilir. Ayarlama için ipuçlarını görmek için tıklayın."
+msgid "The base height from the build plate in millimeters."
+msgstr "Tabanın yapı levhasından milimetre cinsinden yüksekliği."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Genişlik (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3 Boyutlu Görünüm"
+msgid "The width in millimeters on the build plate"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Derinlik (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Önden Görünüm"
+msgid "The depth in millimeters on the build plate"
+msgstr "Yapı levhasındaki milimetre cinsinden derinlik"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Daha koyu olan daha yüksek"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Daha açık olan daha yüksek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Yukarıdan Görünüm"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Litofanlar için, daha fazla ışığın girmesini engellemek amacıyla koyu renk pikseller daha kalın olan bölgelere denk gelmelidir. Yükseklik haritaları için daha açık renk pikseller daha yüksek araziyi ifade eder; bu nedenle daha açık renk piksellerin oluşturulan 3D modelde daha kalın bölgelere denk gelmesi gerekir."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Doğrusal"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Yarı saydamlık"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Sol görünüm"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Litofanlar için yarı saydamlık sağlayacak basit bir logaritmik model bulunur. Yükseklik haritaları için piksel değerleri doğrusal yüksekliklere karşılık gelir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1 mm Geçirgenlik (%)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Sağ görünüm"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "1 milimetre kalınlığında bir baskıya nüfuz eden ışığın yüzdesi. Bu değerin düşürülmesi karanlık bölgelerdeki kontrastı arttırır ve görüntünün açık bölgelerindeki kontrastı azaltır."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Nesne listesi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Düzeltme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Resme uygulanacak düzeltme miktarı."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Mağaza"
+msgid "OK"
+msgstr "Tamam"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Dosya"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Proje Aç"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "Düz&enle"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Var olanları güncelleştir"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Görünüm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Yeni oluştur"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Ayarlar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Özet - Cura Projesi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Uzantılar"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Makinedeki çakışma nasıl çözülmelidir?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Tercihler"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Yazıcı ayarları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Yardım"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tür"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Yeni proje"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Yazıcı Grubu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Yeni bir proje başlatmak istediğinizden emin misiniz? Bu işlem yapı levhasını ve kaydedilmemiş tüm ayarları silecektir."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Profildeki çakışma nasıl çözülmelidir?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Dilimleniyor..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profil ayarları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Dilimlenemedi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "İsim"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Profilde değil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 geçersiz kılma"
+msgstr[1] "%1 geçersiz kılmalar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Kaynağı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 geçersiz kılma"
+msgstr[1] "%1, %2 geçersiz kılmalar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Malzemedeki çakışma nasıl çözülmelidir?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Malzeme ayarları"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Görünürlük ayarı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mod"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Görünür ayarlar:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 / %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Bir projenin yüklenmesi derleme levhasındaki tüm modelleri siler."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Aç"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "İşleme"
+msgid "Want more?"
+msgstr "Daha fazla seçenek görüntülemek ister misiniz?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Dilimle"
+msgid "Backup Now"
+msgstr "Şimdi Yedekle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Dilimleme sürecini başlat"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Otomatik Yedekle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "İptal"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Cura’nın başlatıldığı günlerde otomatik olarak yedekleme yapar."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Süre tahmini"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura Sürümü"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Malzeme tahmini"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Makineler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Malzemeler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profiller"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Süre tahmini yok"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Eklentiler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Maliyet tahmini yok"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Geri Yükle"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Yedeklemeyi Sil"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Bu yedeklemeyi silmek istediğinizden emin misiniz? Bu eylem geri alınamaz."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Yedeklemeyi Geri Yükle"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Yedeklemeniz geri yüklenmeden öne Cura’yı yeniden başlatmalısınız. Cura’yı şimdi kapatmak istiyor musunuz?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Cura ayarlarınızı yedekleyin ve senkronize edin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "Önizleme"
+msgid "Sign in"
+msgstr "Giriş yap"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Bir yazıcı ekleyin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Yedeklemelerim"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Şu anda yedeklemeniz yok. Oluşturmak için “Şimdi Yedekle” düğmesini kullanın."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Önizleme aşamasında en fazla 5 yedekleme görüntüleyebilirsiniz. Önceki yedeklemeleri görmek için mevcut yedeklemelerden birini kaldırın."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura Yedeklemeleri"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Anonim veri toplama hakkında daha fazla bilgi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura, yazdırma kalitesini ve kullanıcı deneyimini iyileştirmek için anonim veri toplar. Aşağıda, paylaşılan tüm verilerin bir örneği verilmiştir:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Anonim veri göndermek istemiyorum"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Anonim veri gönderilmesine izin ver"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Son İşleme Uzantısı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Bir ağ yazıcısı ekleyin"
+msgid "Post Processing Scripts"
+msgstr "Son İşleme Dosyaları"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Dosya ekle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Ağ dışı bir yazıcı ekleyin"
+msgid "Settings"
+msgstr "Ayarlar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "Etkin ileri işleme komut dosyalarını değiştirin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "Aşağıdaki komut dosyası etkin:"
+msgstr[1] "Aşağıdaki komut dosyaları etkin:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Bulut yazıcısı ekle"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Lütfen Ultimaker Original’e yapılan herhangi bir yükseltmeyi seçin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Bulut yanıtı bekleniyor"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Isıtılmış Yapı Levhası (orijinal donanım veya şahsen yapılan)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Yapı Levhası Dengeleme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Hesabınızda hiç yazıcı bulunamıyor mu?"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Baskılarınızın düzgün çıktığından emin olmak için yapı levhanızı ayarlayabilirsiniz. “Sonraki Konuma Taşı” seçeneğine tıkladığınızda, nozül ayarlanabilen farklı konumlara taşınacak."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Hesabınızdaki şu yazıcılar Cura'ya eklendi:"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Her konum için nozülün altına bir kağıt yerleştirin ve yazdırma yapı levhasının yüksekliğini ayarlayın. Kağıt nozülün ucundan yavaşça geçerse yazdırma yapı levhasının yüksekliği doğrudur."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Yapı Levhasını Dengelemeyi Başlat"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Sonraki Konuma Taşı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Yazıcıyı manuel olarak ekle"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "IP adresine göre bir yazıcı ekleyin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Yazıcınızın IP adresini girin."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "Ekle"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Cihaza bağlanılamadı."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "%1 uygulamasından çık"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Ultimaker yazıcınıza bağlanamıyor musunuz?"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Bu adresteki yazıcı henüz yanıt vermedi."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Bu yazıcı bilinmeyen bir yazıcı olduğu veya bir grubun ana makinesi olmadığı için eklenemiyor."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "Geri"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "Bağlan"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Kullanıcı Anlaşması"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Reddet ve kapat"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Ultimaker Cura'ya hoş geldiniz"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"Ultimaker Cura'yı kurmak\n"
-" için lütfen aşağıdaki adımları izleyin. Bu sadece birkaç saniye sürecektir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "Başlayın"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "Ultimaker platformuna giriş yapın"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "Marketplace'den malzeme ayarlarını ve eklentileri ekleyin"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "Malzeme ayarlarınızı ve eklentilerinizi yedekleyin ve senkronize edin"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "Ultimaker Topluluğunda fikirlerinizi paylaşın ve 48.000'den fazla kullanıcıdan yardım alın"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "Atla"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "Reddet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "Ücretsiz Ultimaker Hesabı oluşturun"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Yazıcı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Nozül Ayarları"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Üretici"
+msgid "Nozzle size"
+msgstr "Nozzle boyutu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "Profil sahibi"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Yazıcı adı"
+msgid "Compatible material diameter"
+msgstr "Uyumlu malzeme çapı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Lütfen yazıcınızı adlandırın"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Nozül X ofseti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Ağınızda yazıcı bulunamadı."
+msgid "Nozzle offset Y"
+msgstr "Nozül Y ofseti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Yenile"
+msgid "Cooling Fan Number"
+msgstr "Soğutma Fanı Numarası"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Ekstruder G-Code'u Başlatma"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Ekstruder G-Code'u Sonlandırma"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Yazıcı Ayarları"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "IP'ye göre bir yazıcı ekleyin"
+msgid "X (Width)"
+msgstr "X (Genişlik)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Bulut yazıcısı ekle"
+msgid "Y (Depth)"
+msgstr "Y (Derinlik)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Sorun giderme"
+msgid "Z (Height)"
+msgstr "Z (Yükseklik)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ultimaker Cura'yı geliştirmemiz yardım edin"
+msgid "Build plate shape"
+msgstr "Yapı levhası şekli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura, yazdırma kalitesini ve kullanıcı deneyimini iyileştirmek için anonim veri toplar. Bu veriler aşağıdakileri içerir:"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Merkez nokta"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Makine türleri"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Isıtılmış yatak"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Malzeme kullanımı"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Isıtılmış yapı hacmi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Dilim sayısı"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-code türü"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Yazdırma ayarları"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Yazıcı Başlığı Ayarları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura tarafından toplanan veriler herhangi bir kişisel bilgi içermeyecektir."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Daha fazla bilgi"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "Yenilikler"
+msgid "X max"
+msgstr "X maks"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "Boş"
+msgid "Y max"
+msgstr "Y maks"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "Sürüm notları"
+msgid "Gantry Height"
+msgstr "Portal Yüksekliği"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Ekstrüder Sayısı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "Ekstrüder ofsetlerini GCode'a uygula"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-code’u Başlat"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-code’u Sonlandır"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "Yazıcılarım"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "Ultimaker Digital Factory'de yazıcıları izleyin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "Digital Library'de baskı projeleri oluşturun."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "Yazdırma görevleri"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "Baskı işlerini takip edin ve baskı geçmişinizden yeniden baskı işlemi yapın."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "Ultimaker Cura'yı eklentilerle ve malzeme profilleriyle genişletin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "Ultimaker e-öğrenme ile 3D baskı uzmanı olun."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Ultimaker desteği"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "Ultimaker Cura ile işe nasıl başlayacağınızı öğrenin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "Soru gönder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "Ultimaker Topluluğundan yardım alın."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "Hata bildirin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "Geliştiricileri sorunlarla ilgili bilgilendirin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "Ultimaker web sitesini ziyaret edin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Seçili Modeli %1 ile Yazdır"
+msgstr[1] "Seçili Modelleri %1 ile Yazdır"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Ayarlar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Yeni proje"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Yeni bir proje başlatmak istediğinizden emin misiniz? Bu işlem yapı levhasını ve kaydedilmemiş tüm ayarları silecektir."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Mağaza"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "Yapı levhası"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "Isıtılmış yatağın hedef sıcaklığı. Yatak, bu sıcaklığa doğru ısıtılır veya soğutulur. Bu ayar 0 olarak belirlenirse yatak ısıtma kapatılır."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "Isıtılmış yatağın geçerli sıcaklığı."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "Yatağın ön ısıtma sıcaklığı."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "İptal Et"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Ön ısıtma"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Yazdırma öncesinde yatağı ısıt. Isıtma sırasında yazdırma işinizi ayarlamaya devam edebilirsiniz. Böylece yazdırmaya hazır olduğunuzda yatağın ısınmasını beklemeniz gerekmez."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "Yazıcı bağlı değil."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Yazıcı kontrolü"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Jog Konumu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Jog Mesafesi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "G-code Gönder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Bağlı yazıcıya özel bir G-code komutu gönderin. Komutu göndermek için 'enter' tuşuna basın."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Ekstrüder"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Sıcak ucun hedef sıcaklığı. Sıcak uç, bu sıcaklığa doğru ısıtılır veya soğutulur. Bu ayar 0 olarak belirlenirse sıcak uç ısıtma kapatılır."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Bu sıcak ucun geçerli sıcaklığı."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "Sıcak ucun ön ısıtma sıcaklığı."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Yazdırma öncesinde sıcak ucu ısıt. Isıtma sırasında yazdırma işinizi ayarlamaya devam edebilirsiniz. Böylece yazdırmaya hazır olduğunuzda sıcak ucun ısınmasını beklemeniz gerekmez."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Bu ekstruderdeki malzemenin rengi."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Bu ekstruderdeki malzeme."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "Bu ekstrudere takılan nozül."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Proje dosyası aç"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Bu bir Cura proje dosyasıdır. Bir proje olarak açmak mı yoksa içindeki modelleri içe aktarmak mı istiyorsunuz?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Seçimimi hatırla"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Proje olarak aç"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modelleri içe aktar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Projeyi Kaydet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Ekstruder %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & malzeme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Malzeme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Kaydederken proje özetini bir daha gösterme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Kaydet"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Dosya aç"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Seçtiğiniz dosyalar arasında bir veya daha fazla proje dosyası bulduk. Tek seferde sadece bir proje dosyası açabilirsiniz. Sadece bu dosyalarda bulunan modelleri içe aktarmanızı öneririz. Devam etmek istiyor musunuz?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Tümünü model olarak içe aktar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "%1 hakkında"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "sürüm: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Kaynaşık filaman 3B yazdırma için kalıcı çözüm."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3616,2199 +3597,2385 @@ msgstr ""
 "Cura, topluluk iş birliği ile Ultimaker B.V. tarafından geliştirilmiştir.\n"
 "Cura aşağıdaki açık kaynak projelerini gururla kullanmaktadır:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafik kullanıcı arayüzü"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Uygulama çerçevesi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code oluşturucu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "İşlemler arası iletişim kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programlama dili"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI çerçevesi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI çerçeve bağlantıları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ Bağlantı kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Veri değişim biçimi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Bilimsel bilgi işlem için destek kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Daha hızlı matematik için destek kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "STL dosyalarının işlenmesi için destek kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "Düzlemsel nesnelerin işlenmesi için destek kitaplığı"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Üçgen birleşimlerin işlenmesi için destek kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "3MF dosyalarının işlenmesi için destek kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Dosya meta verileri ve akış için destek kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Seri iletişim kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf keşif kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Poligon kırpma kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Python için statik tür denetleyicisi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "SSL güvenilirliğini doğrulamak için kök sertifikalar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python Hata takip kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Prusa Research tarafından geliştirilen Poligon paketleme kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "libnest2d için Python bağlamaları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "Sistem anahtarlık erişimi için destek kitaplığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Microsoft Windows için Python uzantıları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "Yazı tipi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG simgeleri"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux çapraz-dağıtım uygulama dağıtımı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Dosya aç"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Seçtiğiniz dosyalar arasında bir veya daha fazla proje dosyası bulduk. Tek seferde sadece bir proje dosyası açabilirsiniz. Sadece bu dosyalarda bulunan modelleri içe aktarmanızı öneririz. Devam etmek istiyor musunuz?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Tümünü model olarak içe aktar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Projeyi Kaydet"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Ekstruder %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & malzeme"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Malzeme"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Kaydederken proje özetini bir daha gösterme"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Kaydet"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Değişiklikleri iptal et veya kaydet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"Bazı profil ayarlarını özelleştirdiniz.\n"
-"Profiller arasında geçiş yapıldıktan sonra bu değişiklikleri tutmak ister misiniz?\n"
-"Alternatif olarak, '%1' üzerinden varsayılanları yüklemek için değişiklikleri silebilirsiniz."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Profil ayarları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Mevcut değişiklikler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Her zaman sor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "İptal et ve bir daha sorma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Kaydet ve bir daha sorma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "Değişiklikleri sil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "Değişiklikleri tut"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Proje dosyası aç"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "Seçilecek öğe yok"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Bu bir Cura proje dosyasıdır. Bir proje olarak açmak mı yoksa içindeki modelleri içe aktarmak mı istiyorsunuz?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "Dosya Aç..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Seçimimi hatırla"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "En Son Öğeyi Aç"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Proje olarak aç"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Görünür ayarlar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modelleri içe aktar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "Tüm Kategorileri Daralt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Ayar Görünürlüğünü Yönet..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Malzeme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Etkin Ekstruder olarak ayarla"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Ekstruderi Etkinleştir"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Ekstruderi Devre Dışı Bırak"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Malzeme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoriler"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Genel"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Yardım"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Dosya"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Projeyi Kaydet..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Dışa Aktar..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Seçimi Dışa Aktar..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Tercihler"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "Düz&enle"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Yazıcı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Ağ etkin yazıcılar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Yerel yazıcılar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Uzantılar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Yapılandırmalar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "Geçerli yazdırma"
+msgid "Loading available configurations from the printer..."
+msgstr "Kullanılabilir yapılandırmalar yazıcıdan yükleniyor..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "İşin Adı"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Yazıcı bağlı olmadığından yapılandırmalar kullanılamıyor."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Yazdırma süresi"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "%1 tanınmadığından bu yapılandırma kullanılamaz. Doğru malzeme profilini indirmek için lütfen %2 bölümünü ziyaret edin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Kalan tahmini süre"
+msgid "Marketplace"
+msgstr "Mağaza"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "Bulut yazıcısı çevrimdışı. Yazıcının açık ve internete bağlı olup olmadığını kontrol edin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "Bu ekstrüderin yapılandırılmasına izin verilmiyor ve dilimleme yapılamaz."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Yazıcı hesabınızla bağlanmamış. Bağlantı kurmak için lütfen Ultimaker Digital Factory bölümünü ziyaret edin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "Bu ekstrüderin yapılandırmasıyla eşleşen profil yok."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "Bulut bağlantısı şu anda kullanılamıyor. Bulut yazıcısına bağlanmak için lütfen oturum açın."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Yapılandırma seç"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "Bulut bağlantısı şu anda kullanılamıyor. Lütfen internet bağlantınızı kontrol edin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Yapılandırmalar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Yazıcı ekle"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Özel"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Yazıcıları yönet"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Yazıcı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Bağlı yazıcılar"
+msgid "Enabled"
+msgstr "Etkin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Önayarlı yazıcılar"
+msgid "Material"
+msgstr "Malzeme"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Yazdırma ayarları"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Bu malzeme kombinasyonuyla daha iyi yapıştırma için yapıştırıcı kullanın."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Yazıcı kurulumu devre dışı bırakıldı. G-code dosyası düzenlenemez."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Seçili Modeli Şununla Yazdır:"
+msgstr[1] "Seçili Modelleri Şununla Yazdır:"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Seçili Modeli Çoğalt"
+msgstr[1] "Seçili Modelleri Çoğalt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
+msgid "Number of Copies"
+msgstr "Kopya Sayısı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "Projeyi Kaydet..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Görünüm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Kamera konumu"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Kamera görüşü"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspektif"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Ortografik"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Görüntüleme tipi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "Ultimaker platformuna giriş yapın"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"Bazı ayar/geçersiz kılma değerleri profilinizde saklanan değerlerden farklıdır.\n"
-"\n"
-"Profil yöneticisini açmak için tıklayın."
+"- Marketplace'den malzeme profilleri ve eklentiler ekleyin\n"
+"- Malzeme profillerinizi ve eklentilerinizi yedekleyin ve senkronize edin\n"
+"- Ultimaker topluluğunda fikirlerinizi paylaşın ve 48.000'den fazla kullanıcıdan yardım alın"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Özel profiller"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "Ücretsiz Ultimaker hesabı oluşturun"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Geçerli değişiklikleri iptal et"
+msgid "Sign in"
+msgstr "Giriş yap"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Son güncelleme: %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "Önerilen"
+msgid "Ultimaker Account"
+msgstr "Ultimaker hesabı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "Özel"
+msgid "Sign Out"
+msgstr "Çıkış yap"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Kontrol ediliyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Hesap senkronize edildi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Bir sorun oluştu..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Bekleyen güncellemeleri yükle"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Hesap güncellemelerini kontrol et"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Dilimleniyor..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Dilimlenemedi"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "İşleme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "Dilimle"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "Dilimleme sürecini başlat"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "İptal"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Süre tahmini"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Malzeme tahmini"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "Süre tahmini yok"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Maliyet tahmini yok"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Önizleme"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Bu paket yeniden başlatmanın ardından kurulacak."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Genel"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Ayarlar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Yazıcılar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Malzemeler"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profiller"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1 kapatılıyor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "%1 uygulamasından çıkmak istediğinizden emin misiniz?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Paketi Kur"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Dosya Aç"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Seçtiğiniz dosyalar arasında bir veya daha fazla G-code dosyası bulduk. Tek seferde sadece bir G-code dosyası açabilirsiniz. Bir G-code dosyası açmak istiyorsanız, sadece birini seçiniz."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Yazıcı Ekle"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Yenilikler"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "Açık"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "Kapalı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "Deneysel"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Yazdırma ayarları"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Yazıcı kurulumu devre dışı bırakıldı. G-code dosyası düzenlenemez."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Önerilen"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Özel"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "%2 ekstrüderindeki yapılandırmalar için %1 profili yok. Bunun yerine varsayılan amaç kullanılacak"
 msgstr[1] "%2 ekstrüderindeki yapılandırmalar için %1 profili yok. Bunun yerine varsayılan amaç kullanılacak"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profiller"
+msgid "Gradual infill"
+msgstr "Aşamalı dolgu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Bazı profil ayarlarını değiştirdiniz. Bunları değişiklikleri kaydetmek istiyorsanız, özel moda gidin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Kademeli dolgu, yukarıya doğru dolgu miktarını kademeli olarak yükselecektir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "Destek"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Modellerin askıda kalan kısımlarını destekleyen yapılar oluşturun. Bu yapılar olmadan, yazdırma sırasında söz konusu kısımlar düşebilir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Aşamalı dolgu"
+msgid "Profiles"
+msgstr "Profiller"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Kademeli dolgu, yukarıya doğru dolgu miktarını kademeli olarak yükselecektir."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Bazı profil ayarlarını değiştirdiniz. Bunları değişiklikleri kaydetmek istiyorsanız, özel moda gidin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "Yapıştırma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Bir kenar veya radye yazdırın. Bu nesnenizin etrafına veya altına daha sonra kesilmesi kolay olan düz bir alan sağlayacak."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "Projeyi Kaydet..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Özel profiller"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Ağ etkin yazıcılar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Geçerli değişiklikleri iptal et"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Yerel yazıcılar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Malzeme"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Bazı ayar/geçersiz kılma değerleri profilinizde saklanan değerlerden farklıdır.\n"
+"\n"
+"Profil yöneticisini açmak için tıklayın."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoriler"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Ayar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Genel"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Seçili Modeli Şununla Yazdır:"
-msgstr[1] "Seçili Modelleri Şununla Yazdır:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Geçerli"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Seçili Modeli Çoğalt"
-msgstr[1] "Seçili Modelleri Çoğalt"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Kopya Sayısı"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Projeyi Kaydet..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Dışa Aktar..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Seçimi Dışa Aktar..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Görünürlüğü Ayarlama"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Yapılandırmalar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Özel"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Tümünü denetle"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Etkinleştir"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Yeniden adlandır"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Çap Değişikliğini Onayla"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Yeni filaman çapı %1 mm olarak ayarlandı ve bu değer, geçerli ekstrüder ile uyumlu değil. Devam etmek istiyor musunuz?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "Yazıcı"
+msgid "Display Name"
+msgstr "Görünen Ad"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Etkin"
+msgid "Brand"
+msgstr "Marka"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "Malzeme"
+msgid "Material Type"
+msgstr "Malzeme Türü"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Bu malzeme kombinasyonuyla daha iyi yapıştırma için yapıştırıcı kullanın."
+msgid "Color"
+msgstr "Renk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "Bu ekstrüderin yapılandırılmasına izin verilmiyor ve dilimleme yapılamaz."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "Bu ekstrüderin yapılandırmasıyla eşleşen profil yok."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "Özellikler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Yapılandırma seç"
+msgid "Density"
+msgstr "Yoğunluk"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Yapılandırmalar"
+msgid "Diameter"
+msgstr "Çap"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Kullanılabilir yapılandırmalar yazıcıdan yükleniyor..."
+msgid "Filament Cost"
+msgstr "Filaman masrafı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Yazıcı bağlı olmadığından yapılandırmalar kullanılamıyor."
+msgid "Filament weight"
+msgstr "Filaman ağırlığı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "%1 tanınmadığından bu yapılandırma kullanılamaz. Doğru malzeme profilini indirmek için lütfen %2 bölümünü ziyaret edin."
+msgid "Filament length"
+msgstr "Filaman uzunluğu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Mağaza"
+msgid "Cost per Meter"
+msgstr "Metre başına maliyet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "Dosya Aç..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Bu malzeme %1’e bağlıdır ve özelliklerinden bazılarını paylaşır."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Yazıcı"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Malzemeyi Ayır"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Malzeme"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "Tanım"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Etkin Ekstruder olarak ayarla"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Yapışma Bilgileri"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Ekstruderi Etkinleştir"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "Bilgi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Ekstruderi Devre Dışı Bırak"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "Malzemeleri yazıcılarla senkronize et"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "En Son Öğeyi Aç"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "Malzemeleri yazıcılarla senkronize et"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Görünür ayarlar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "Birkaç basit adımı izleyerek tüm malzeme profillerinizi yazıcılarınızla senkronize edebileceksiniz."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Tüm Kategorileri Daralt"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "Malzeme profillerini neden senkronize etmem gerekiyor?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Ayar Görünürlüğünü Yönet..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "Başlat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Kamera konumu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "Giriş yap"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Kamera görüşü"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "Malzeme profillerini Digital Factory'ye bağlı tüm yazıcılarınızla otomatik olarak senkronize etmek için Cura'da oturum açmanız gerekir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektif"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "Malzemeleri USB ile senkronize et"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortografik"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "Aşağıdaki yazıcılar yeni malzeme profillerini alacak:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Yapı levhası"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "Malzemeler yazıcılara gönderilirken bir sorun oluştu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Görüntüleme tipi"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "Malzeme profilleri aşağıdaki yazıcılarla başarıyla senkronize edildi:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Destek olarak basıldı."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "Sorun giderme"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Bu model ile çakışan diğer modeller değiştirilir."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "Yazıcı eksik mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Bu model ile çakışan dolgu değiştirilir."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "Tüm yazıcılarınızın AÇIK ve Digitial Factory'ye bağlı olduğundan emin olun."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Bu model ile çakışmalar desteklenmez."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "Listeyi Yenile"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "%1 ayarı geçersiz kılar."
-msgstr[1] "%1 ayarı geçersiz kılar."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "Yeniden dene"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profiller"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "Bitti"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Etkinleştir"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "Senkronize et"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "Oluştur"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "Senkronize ediliyor"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "Yazıcı bulunamadı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "Digital Factory'ye bağlı uyumlu yazıcınız yok gibi görünüyor. Yazıcınızın bağlı olduğundan ve en son donanım yazılımını çalıştırdığından emin olun."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "Yazıcınızı Digital Factory'ye nasıl bağlayacağınızı öğrenin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "Yenile"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "Malzeme profillerini USB üzerinden senkronize edin"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "Yeni malzeme profillerini yazıcınıza yüklemek için aşağıdaki adımları izleyin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "Malzeme arşivini dışa aktar düğmesine tıklayın."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr ".umm dosyasını bir USB çubuğa kaydedin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "USB çubuğunu yazıcınıza takın ve yeni malzeme profillerini yükleme işlemini başlatın."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "Yazıcıma yeni malzeme profilleri nasıl yüklenir"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Geri"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "Malzeme arşivini dışa aktar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "Tüm Malzemeleri Dışa Aktar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Çoğalt"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Yeniden adlandır"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "İçe Aktar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "Dışa Aktar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profil Oluştur"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Bu profil için lütfen bir ad girin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Çoğalt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profili Çoğalt"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Dışa Aktar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Kaldırmayı Onayla"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "%1’i kaldırmak istediğinizden emin misiniz? Bu eylem geri alınamaz!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profili Yeniden Adlandır"
+msgid "Import Material"
+msgstr "Malzemeyi İçe Aktar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profili İçe Aktar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Malzeme <filename>%1</filename> dosyasına başarıyla içe aktarıldı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Malzeme <filename>%1</filename> dosyasına içe aktarılamadı: <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profili Dışa Aktar"
+msgid "Export Material"
+msgstr "Malzemeyi Dışa Aktar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Malzemenin <filename>%1</filename> dosyasına dışa aktarımı başarısız oldu: <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Malzeme <filename>%1</filename> dosyasına başarıyla dışa aktarıldı"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Yazıcı: %1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "Profili geçerli ayarlar/geçersiz kılmalar ile güncelle"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Bu profil yazıcının belirlediği varsayılan ayarları kullanır; dolayısıyla aşağıdaki listede bulunan ayarları/geçersiz kılmaları içermez."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Geçerli ayarlarınız seçilen profille uyumlu."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Küresel Ayarlar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Genel"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profil Oluştur"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Bu profil için lütfen bir ad girin."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profili Dışa Aktar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profili Çoğalt"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profili Yeniden Adlandır"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profili İçe Aktar"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Arayüz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Para Birimi:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "Tema:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Bu değişikliklerinin geçerli olması için uygulamayı yeniden başlatmanız gerekecektir."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Ayarlar değiştirilirken otomatik olarak dilimle."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Otomatik olarak dilimle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Görünüm şekli"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Modelin desteklenmeyen alanlarını kırmızı ile gösterin. Destek alınmadan bu alanlar düzgün bir şekilde yazdırılmayacaktır."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Dışarıda kalan alanı göster"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Modelin eksik veya ikincil yüzeylerini uyarı işaretleri kullanarak vurgulayın. Amaçlanan geometrinin eksik parçaları genellikle takım yolları olacaktır."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Model hatalarını görüntüle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Bir model seçildiğinde bu model görüntünün ortasında kalacak şekilde kamera hareket eder"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Öğeyi seçince kamerayı ortalayın"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Cura’nın varsayılan yakınlaştırma davranışı tersine çevrilsin mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Kamera yakınlaştırma yönünü ters çevir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Yakınlaştırma farenin hareket yönüne uygun olsun mu?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Fareye doğru yakınlaştırma yapılması ortografik perspektifte desteklenmez."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Farenin hareket yönüne göre yakınlaştır"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Platformun üzerindeki öğeler kesişmemeleri için hareket ettirilmeli mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Modellerin birbirinden ayrı olduğundan emin olduğundan emin olun"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Platformun üzerindeki modeller yapı levhasına değmeleri için indirilmeli mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Modelleri otomatik olarak yapı tahtasına indirin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "G-code okuyucuda uyarı mesajı göster."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "G-code okuyucuda uyarı mesajı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Katman, uyumluluk moduna zorlansın mı?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Katman görünümünü uyumluluk moduna zorla (yeniden başlatma gerekir)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Cura kapatıldığı yerden mi başlatılsın?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Başlangıçtaki pencere konumuna dönülsün"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Ne tür bir kamera oluşturma işlemi kullanılmalıdır?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Kamera oluşturma:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "Perspektif"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "Ortografik"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Dosyaların açılması ve kaydedilmesi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Masaüstünden veya harici uygulamalardan açılan dosyalar aynı Cura örneğinde mi açılacak?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Tek bir Cura örneği kullan"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "Cura'nın tek örneğinde yeni bir model yüklenmeden önce yapı plakası temizlensin mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "Modeli tek örneğe yüklemeden önce yapı plakasını temizleyin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Modeller çok büyükse yapı hacmine göre ölçeklendirilmeli mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Büyük modelleri ölçeklendirin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Bir modelin birimi milimetre değil de metre ise oldukça küçük görünebilir. Bu modeller ölçeklendirilmeli mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Çok küçük modelleri ölçeklendirin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Yüklendikten sonra modeller seçilsin mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Yüklendiğinde modelleri seç"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Yazıcı adına bağlı bir ön ek otomatik olarak yazdırma işinin adına eklenmeli mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Makine ön ekini iş adına ekleyin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Bir proje dosyasını kaydederken özet gösterilmeli mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Projeyi kaydederken özet iletişim kutusunu göster"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Bir proje dosyası açıldığında varsayılan davranış"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Bir proje dosyası açıldığında varsayılan davranış: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Her zaman sor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Her zaman proje olarak aç"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Her zaman modelleri içe aktar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Bir profil üzerinde değişiklik yapıp farklı bir profile geçtiğinizde, değişikliklerin kaydedilmesini isteyip istemediğinizi soran bir iletişim kutusu açılır. Alternatif olarak bu işleve yönelik varsayılan bir davranış seçebilir ve bu iletişim kutusunun bir daha görüntülenmemesini tercih edebilirsiniz."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Farklı bir profile geçerken değişen ayar değerleriyle ilgili varsayılan davranış: "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Değiştirilen ayarları her zaman at"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Değiştirilen ayarları her zaman yeni profile taşı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Gizlilik"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Yazdırmanızdaki anonim veriler Ultimaker’a gönderilmeli mi? Unutmayın; hiçbir model, IP adresi veya diğer kişiye özgü bilgiler gönderilmez veya saklanmaz."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(Anonim) yazdırma bilgisi gönder"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "Daha fazla bilgi"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "Güncellemeler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura, program başladığında güncellemeleri kontrol etmeli mi?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Başlangıçta güncellemeleri kontrol edin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "Güncellemeleri kontrol ederken yalnızca istikrarlı sürümleri kontrol edin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "Yalnızca istikrarlı sürümler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "Güncellemeleri kontrol ederken hem istikrarlı hem de beta sürümleri kontrol edin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "İstikrarlı ve Beta sürümler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "Cura her başlatıldığında yeni eklentiler için otomatik kontrol yapılsın mı? Bu seçeneği devre dışı bırakmanız kesinlikle önerilmez!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "Eklenti güncellemeleri için bildirim alın"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Bilgi"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "IP adresine göre bir yazıcı ekleyin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Çap Değişikliğini Onayla"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Yazıcınızın IP adresini girin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Yeni filaman çapı %1 mm olarak ayarlandı ve bu değer, geçerli ekstrüder ile uyumlu değil. Devam etmek istiyor musunuz?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Ekle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Görünen Ad"
+msgid "Could not connect to device."
+msgstr "Cihaza bağlanılamadı."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Malzeme Türü"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Ultimaker yazıcınıza bağlanamıyor musunuz?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "Renk"
+msgid "The printer at this address has not responded yet."
+msgstr "Bu adresteki yazıcı henüz yanıt vermedi."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "Özellikler"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Bu yazıcı bilinmeyen bir yazıcı olduğu veya bir grubun ana makinesi olmadığı için eklenemiyor."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Yoğunluk"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Bağlan"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "Çap"
+msgid "Release Notes"
+msgstr "Sürüm notları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Filaman masrafı"
+msgid "User Agreement"
+msgstr "Kullanıcı Anlaşması"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Filaman ağırlığı"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Kabul ediyorum"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Filaman uzunluğu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Reddet ve kapat"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Metre başına maliyet"
+msgid "What's New"
+msgstr "Yenilikler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "Sonraki"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Bu malzeme %1’e bağlıdır ve özelliklerinden bazılarını paylaşır."
+msgid "Add a Cloud printer"
+msgstr "Bulut yazıcısı ekle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Malzemeyi Ayır"
+msgid "Waiting for Cloud response"
+msgstr "Bulut yanıtı bekleniyor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "Tanım"
+msgid "No printers found in your account?"
+msgstr "Hesabınızda hiç yazıcı bulunamıyor mu?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Yapışma Bilgileri"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Hesabınızdaki şu yazıcılar Cura'ya eklendi:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Oluştur"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Yazıcıyı manuel olarak ekle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Çoğalt"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "Marketplace'den malzeme ayarlarını ve eklentileri ekleyin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "Yazıcılarla Senkronize Et"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "Malzeme ayarlarınızı ve eklentilerinizi yedekleyin ve senkronize edin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Yazıcı"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "Ultimaker Topluluğunda fikirlerinizi paylaşın ve 48.000'den fazla kullanıcıdan yardım alın"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Malzemeyi İçe Aktar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "Atla"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Malzeme <filename>%1</filename> dosyasına içe aktarılamadı: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "Ücretsiz Ultimaker Hesabı oluşturun"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Malzeme <filename>%1</filename> dosyasına başarıyla içe aktarıldı"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Ultimaker Cura'ya hoş geldiniz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Malzemeyi Dışa Aktar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"Ultimaker Cura'yı kurmak\n"
+" için lütfen aşağıdaki adımları izleyin. Bu sadece birkaç saniye sürecektir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Malzemenin <filename>%1</filename> dosyasına dışa aktarımı başarısız oldu: <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Başlayın"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Malzeme <filename>%1</filename> dosyasına başarıyla dışa aktarıldı"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Boş"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "Malzemeleri yazıcılarla senkronize et"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Üretici"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "Malzemeleri yazıcılarla senkronize et"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Profil sahibi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "Birkaç basit adımı izleyerek tüm malzeme profillerinizi yazıcılarınızla senkronize edebileceksiniz."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Yazıcı adı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "Başlat"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Lütfen yazıcınızı adlandırın"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "Malzeme profillerini neden senkronize etmem gerekiyor?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Bir yazıcı ekleyin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "Giriş yap"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Bir ağ yazıcısı ekleyin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "Malzeme profillerini Digital Factory'ye bağlı tüm yazıcılarınızla otomatik olarak senkronize etmek için Cura'da oturum açmanız gerekir."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Ağ dışı bir yazıcı ekleyin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "Malzemeleri USB ile senkronize et"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Ağınızda yazıcı bulunamadı."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "Aşağıdaki yazıcılar yeni malzeme profillerini alacak:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Yenile"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "Malzemeler yazıcılara gönderilirken bir sorun oluştu."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "IP'ye göre bir yazıcı ekleyin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "Malzeme profilleri aşağıdaki yazıcılarla başarıyla senkronize edildi:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Bulut yazıcısı ekle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Sorun giderme"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "Yazıcı eksik mi?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ultimaker Cura'yı geliştirmemiz yardım edin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "Tüm yazıcılarınızın AÇIK ve Digitial Factory'ye bağlı olduğundan emin olun."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "Listeyi Yenile"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "Yeniden dene"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "Bitti"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura, yazdırma kalitesini ve kullanıcı deneyimini iyileştirmek için anonim veri toplar. Bu veriler aşağıdakileri içerir:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "Senkronize et"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Makine türleri"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "Senkronize ediliyor"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Malzeme kullanımı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "Yazıcı bulunamadı"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Dilim sayısı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "Digital Factory'ye bağlı uyumlu yazıcınız yok gibi görünüyor. Yazıcınızın bağlı olduğundan ve en son donanım yazılımını çalıştırdığından emin olun."
+msgid "Print settings"
+msgstr "Yazdırma ayarları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "Yazıcınızı Digital Factory'ye nasıl bağlayacağınızı öğrenin"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura tarafından toplanan veriler herhangi bir kişisel bilgi içermeyecektir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "Yenile"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Daha fazla bilgi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "Malzeme profillerini USB üzerinden senkronize edin"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Nesne listesi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "Yeni malzeme profillerini yazıcınıza yüklemek için aşağıdaki adımları izleyin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "Destek olarak basıldı."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "Malzeme arşivini dışa aktar düğmesine tıklayın."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "Bu model ile çakışan diğer modeller değiştirilir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr ".umm dosyasını bir USB çubuğa kaydedin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "Bu model ile çakışan dolgu değiştirilir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "USB çubuğunu yazıcınıza takın ve yeni malzeme profillerini yükleme işlemini başlatın."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "Bu model ile çakışmalar desteklenmez."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "Yazıcıma yeni malzeme profilleri nasıl yüklenir"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "%1 ayarı geçersiz kılar."
+msgstr[1] "%1 ayarı geçersiz kılar."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "Malzeme arşivini dışa aktar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Bağlı yazıcılar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "Tüm Malzemeleri Dışa Aktar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Önayarlı yazıcılar"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Görünürlüğü Ayarlama"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "Bulut yazıcısı çevrimdışı. Yazıcının açık ve internete bağlı olup olmadığını kontrol edin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Tümünü denetle"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Yazıcı hesabınızla bağlanmamış. Bağlantı kurmak için lütfen Ultimaker Digital Factory bölümünü ziyaret edin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Yazıcılar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "Bulut bağlantısı şu anda kullanılamıyor. Bulut yazıcısına bağlanmak için lütfen oturum açın."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Hesaplanmış"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "Bulut bağlantısı şu anda kullanılamıyor. Lütfen internet bağlantınızı kontrol edin."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Ayar"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Yazıcı ekle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Yazıcıları yönet"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Geçerli"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Birim"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Başlıksız"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "Yazıcıya bağlı değil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "Yazıcı komutları kabul etmiyor"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "Bakımda. Lütfen yazıcıyı kontrol edin"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "Yazıcı bağlantısı koptu"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "Yazdırılıyor..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "Duraklatıldı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "Hazırlanıyor..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "Lütfen yazıcıyı çıkarın"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "Yazdırmayı Durdur"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Yazdırmayı iptal etmek istediğinizden emin misiniz?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Seçili Modeli %1 ile Yazdır"
-msgstr[1] "Seçili Modelleri %1 ile Yazdır"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "Yazıcılarım"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "Ultimaker Digital Factory'de yazıcıları izleyin."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "Digital Library'de baskı projeleri oluşturun."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "Yazdırma görevleri"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "Baskı işlerini takip edin ve baskı geçmişinizden yeniden baskı işlemi yapın."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "Ultimaker Cura'yı eklentilerle ve malzeme profilleriyle genişletin."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "Ultimaker e-öğrenme ile 3D baskı uzmanı olun."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Ultimaker desteği"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Gizlenen bazı ayarlar normal hesaplanan değerden farklı değerler kullanır.\n"
+"\n"
+"Bu ayarları görmek için tıklayın."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "Ultimaker Cura ile işe nasıl başlayacağınızı öğrenin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Arama ayarları"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "Soru gönder"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Değeri tüm ekstruderlere kopyala"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "Ultimaker Topluluğundan yardım alın."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Tüm değiştirilmiş değerleri tüm ekstruderlere kopyala"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "Hata bildirin"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Bu ayarı gizle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "Geliştiricileri sorunlarla ilgili bilgilendirin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Bu ayarı gösterme"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "Ultimaker web sitesini ziyaret edin."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Bu ayarı görünür yap"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "Yazıcı kontrolü"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Görünürlük ayarını yapılandır..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Jog Konumu"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Etkilediği tüm ayarlar geçersiz kılındığı için bu ayar kullanılmamaktadır."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Etkileri"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr ".........den etkilenir"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Jog Mesafesi"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Bu ayar her zaman, tüm ekstrüderler arasında paylaşılır. Buradan değiştirildiğinde tüm ekstrüderler için değer değiştirir."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "G-code Gönder"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Bağlı yazıcıya özel bir G-code komutu gönderin. Komutu göndermek için 'enter' tuşuna basın."
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Bu ayar, çakışan ekstrüdere özgü değerlerden çözümlenir:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Ekstrüder"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Sıcak ucun hedef sıcaklığı. Sıcak uç, bu sıcaklığa doğru ısıtılır veya soğutulur. Bu ayar 0 olarak belirlenirse sıcak uç ısıtma kapatılır."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Bu sıcak ucun geçerli sıcaklığı."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "Sıcak ucun ön ısıtma sıcaklığı."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "İptal Et"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Ön ısıtma"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Yazdırma öncesinde sıcak ucu ısıt. Isıtma sırasında yazdırma işinizi ayarlamaya devam edebilirsiniz. Böylece yazdırmaya hazır olduğunuzda sıcak ucun ısınmasını beklemeniz gerekmez."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Bu ekstruderdeki malzemenin rengi."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Bu ekstruderdeki malzeme."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "Bu ekstrudere takılan nozül."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "Yazıcı bağlı değil."
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Bu ayarın değeri profilden farklıdır.\n"
+"\n"
+"Profil değerini yenilemek için tıklayın."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Yapı levhası"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "Isıtılmış yatağın hedef sıcaklığı. Yatak, bu sıcaklığa doğru ısıtılır veya soğutulur. Bu ayar 0 olarak belirlenirse yatak ısıtma kapatılır."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "Isıtılmış yatağın geçerli sıcaklığı."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "Yatağın ön ısıtma sıcaklığı."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Yazdırma öncesinde yatağı ısıt. Isıtma sırasında yazdırma işinizi ayarlamaya devam edebilirsiniz. Böylece yazdırmaya hazır olduğunuzda yatağın ısınmasını beklemeniz gerekmez."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Giriş yap"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- Marketplace'den malzeme profilleri ve eklentiler ekleyin\n"
-"- Malzeme profillerinizi ve eklentilerinizi yedekleyin ve senkronize edin\n"
-"- Ultimaker topluluğunda fikirlerinizi paylaşın ve 48.000'den fazla kullanıcıdan yardım alın"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "Ücretsiz Ultimaker hesabı oluşturun"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Son güncelleme: %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker hesabı"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Çıkış yap"
+"Bu ayar normal olarak yapılır ama şu anda mutlak değer ayarı var.\n"
+"\n"
+"Hesaplanan değeri yenilemek için tıklayın."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Kontrol ediliyor..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Hesap senkronize edildi"
+msgid "Active print"
+msgstr "Geçerli yazdırma"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Bir sorun oluştu..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Bekleyen güncellemeleri yükle"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Hesap güncellemelerini kontrol et"
+msgid "Job Name"
+msgstr "İşin Adı"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Başlıksız"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Yazdırma süresi"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "Seçilecek öğe yok"
+msgid "Estimated time left"
+msgstr "Kalan tahmini süre"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Çevrimiçi Sorun Giderme Kılavuzunu"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Tam Ekrana Geç"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "Tam Ekrandan Çık"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Geri Al"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "&Yinele"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Çıkış"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "3 Boyutlu Görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Önden Görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Yukarıdan Görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "Alttan Görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "Sol Taraftan Görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "Sağ Taraftan Görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Cura’yı yapılandır..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "&Yazıcı Ekle..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Yazıcıları Yönet..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Malzemeleri Yönet..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "Mağazadan daha fazla malzeme ekle"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Profili geçerli ayarlar/geçersiz kılmalar ile güncelle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Geçerli değişiklikleri iptal et"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "G&eçerli ayarlardan/geçersiz kılmalardan profil oluştur..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Profilleri Yönet..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Çevrimiçi Belgeleri Göster"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Hata Bildir"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "Yenilikler"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Hakkında..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "Seçileni Sil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "Seçileni Ortala"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "Seçileni Çoğalt"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Modeli Sil"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Modeli Platformda Ortala"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "Modelleri Gruplandır"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Model Grubunu Çöz"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "&Modelleri Birleştir"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Modeli Çoğalt..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Tüm modelleri Seç"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Yapı Levhasını Temizle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Tüm Modelleri Yeniden Yükle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Tüm Modelleri Tüm Yapı Levhalarına Yerleştir"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Tüm Modelleri Düzenle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Seçimi Düzenle"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Tüm Model Konumlarını Sıfırla"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Tüm Model ve Dönüşümleri Sıfırla"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Dosya Aç..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Yeni Proje..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Yapılandırma Klasörünü Göster"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Görünürlük ayarını yapılandır..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Mağazayı Göster"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Etkilediği tüm ayarlar geçersiz kılındığı için bu ayar kullanılmamaktadır."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Etkileri"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr ".........den etkilenir"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Bu ayar her zaman, tüm ekstrüderler arasında paylaşılır. Buradan değiştirildiğinde tüm ekstrüderler için değer değiştirir."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Bu ayar, çakışan ekstrüdere özgü değerlerden çözümlenir:"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Bu ayarın değeri profilden farklıdır.\n"
-"\n"
-"Profil değerini yenilemek için tıklayın."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Bu ayar normal olarak yapılır ama şu anda mutlak değer ayarı var.\n"
-"\n"
-"Hesaplanan değeri yenilemek için tıklayın."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Arama ayarları"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Değeri tüm ekstruderlere kopyala"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Tüm değiştirilmiş değerleri tüm ekstruderlere kopyala"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Bu ayarı gizle"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Bu ayarı gösterme"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Bu ayarı görünür yap"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Gizlenen bazı ayarlar normal hesaplanan değerden farklı değerler kullanır.\n"
-"\n"
-"Bu ayarları görmek için tıklayın."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Bu paket yeniden başlatmanın ardından kurulacak."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Ayarlar"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1 kapatılıyor"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "%1 uygulamasından çıkmak istediğinizden emin misiniz?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Paketi Kur"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3 Boyutlu Görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Dosya Aç"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Önden Görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Seçtiğiniz dosyalar arasında bir veya daha fazla G-code dosyası bulduk. Tek seferde sadece bir G-code dosyası açabilirsiniz. Bir G-code dosyası açmak istiyorsanız, sadece birini seçiniz."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Yukarıdan Görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Yazıcı Ekle"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Sol görünüm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Yenilikler"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Sağ görünüm"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Model Başına Ayarları sağlar."
+msgid "Provides a prepare stage in Cura."
+msgstr "Cura’da hazırlık aşaması sunar."
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Model Başına Ayarlar Aracı"
+msgid "Prepare Stage"
+msgstr "Hazırlık Aşaması"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Cura profillerinin içe aktarılması için destek sağlar."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Cura profillerinin dışa aktarılması için destek sağlar."
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura Profil Okuyucu"
+msgid "Cura Profile Writer"
+msgstr "Cura Profili Yazıcı"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "X3D dosyalarının okunması için destek sağlar."
+msgid "Provides support for reading model files."
+msgstr "Model dosyalarını okuma desteği sağlar."
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D Okuyucu"
+msgid "Trimesh Reader"
+msgstr "Trimesh Okuyucu"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Yapılandırmanızı yedekleyin ve geri yükleyin."
+msgid "Checks for firmware updates."
+msgstr "Bellenim güncellemelerini denetler."
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura Yedeklemeleri"
+msgid "Firmware Update Checker"
+msgstr "Bellenim Güncelleme Denetleyicisi"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Makine ayarlarının değiştirilmesini sağlar (yapı hacmi, nozül boyutu vb.)"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Çökme raporlayıcının kullanabilmesi için belirli olayları günlüğe kaydeder"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Makine Ayarları eylemi"
+msgid "Sentry Logger"
+msgstr "Nöbetçi Günlükçü"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Belirli yerlerde desteğin yazdırılmasını engellemek için bir silici yüzey oluşturur"
+msgid "Provides a monitor stage in Cura."
+msgstr "Cura’da görüntüleme aşaması sunar."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Destek Silici"
+msgid "Monitor Stage"
+msgstr "Görüntüleme Aşaması"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5820,105 +5987,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "Çıkarılabilir Sürücü Çıkış Cihazı Eklentisi"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Aygıt yazılımını güncellemeye yönelik makine eylemleri sağlar."
+msgid "Provides support for reading AMF files."
+msgstr "AMF dosyalarının okunması için destek sağlar."
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Aygıt Yazılımı Güncelleyici"
+msgid "AMF Reader"
+msgstr "AMF Okuyucu"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Eski Cura sürümlerinden profilleri içe aktarmak için destek sağlar."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Ultimaker Biçim Paketlerinin okunması için destek sağlar."
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Eski Cura Profil Okuyucu"
+msgid "UFP Reader"
+msgstr "UFP Okuyucu"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "3MF dosyalarının okunması için destek sağlar."
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "Digital Library'ye bağlanarak Cura'nın Digital Library'deki dosyaları açmasına ve kaydetmesine olanak tanır."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF Okuyucu"
+msgid "Ultimaker Digital Library"
+msgstr "Ultimaker Digital Library"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Ultimaker Biçim Paketleri yazmak için destek sağlar."
+msgid "Provides the Per Model Settings."
+msgstr "Model Başına Ayarları sağlar."
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UPF Yazıcı"
+msgid "Per Model Settings Tool"
+msgstr "Model Başına Ayarlar Aracı"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Çökme raporlayıcının kullanabilmesi için belirli olayları günlüğe kaydeder"
+msgid "Provides a machine actions for updating firmware."
+msgstr "Aygıt yazılımını güncellemeye yönelik makine eylemleri sağlar."
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Nöbetçi Günlükçü"
+msgid "Firmware Updater"
+msgstr "Aygıt Yazılımı Güncelleyici"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "G-code dosyalarından profilleri içe aktarmak için destek sağlar."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Ultimaker ağındaki yazıcılar için ağ bağlantılarını yönetir."
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code Profil Okuyucu"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker Ağ Bağlantısı"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Cura’da ön izleme aşaması sunar."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Olası yazdırma sorunlarına karşı modelleri ve yazdırma yapılandırmasını kontrol eder ve öneriler verir."
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Öz İzleme Aşaması"
+msgid "Model Checker"
+msgstr "Model Kontrol Edici"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Röntgen Görüntüsü sağlar."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgen Görüntüsü"
+msgid "Simulation View"
+msgstr "Simülasyon Görünümü"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "CuraEngine arka dilimleme ucuna bağlantı sağlar."
+msgid "Writes g-code to a file."
+msgstr "G-code’u bir dosyaya yazar."
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine Arka Uç"
+msgid "G-code Writer"
+msgstr "G-code Yazıcı"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "AMF dosyalarının okunması için destek sağlar."
+msgid "Provides support for writing 3MF files."
+msgstr "3MF dosyalarının yazılması için destek sağlar."
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF Okuyucu"
+msgid "3MF Writer"
+msgstr "3MF Yazıcı"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -5930,175 +6097,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "Sıkıştırılmış G-code Okuyucusu"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Kullanıcının oluşturduğu komut dosyalarına son işleme için izin veren uzantı"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "XML tabanlı malzeme profillerini okuma ve yazma olanağı sağlar."
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Son İşleme"
+msgid "Material Profiles"
+msgstr "Malzeme Profilleri"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Cura profillerinin dışa aktarılması için destek sağlar."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "CuraEngine arka dilimleme ucuna bağlantı sağlar."
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura Profili Yazıcı"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine Arka Uç"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "G-Code’ları kabul eder ve bir yazıcıya gönderir. Eklenti aynı zamanda üretici sürümünü güncelleyebilir."
+msgid "Provides support for reading X3D files."
+msgstr "X3D dosyalarının okunması için destek sağlar."
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB yazdırma"
+msgid "X3D Reader"
+msgstr "X3D Okuyucu"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Cura’da hazırlık aşaması sunar."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "2D resim dosyasından yazdırılabilir geometri oluşturulmasını sağlar."
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Hazırlık Aşaması"
+msgid "Image Reader"
+msgstr "Resim Okuyucu"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "G-code dosyalarının yüklenmesine ve görüntülenmesine olanak tanır."
+msgid "Provides support for reading 3MF files."
+msgstr "3MF dosyalarının okunması için destek sağlar."
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code Okuyucu"
+msgid "3MF Reader"
+msgstr "3MF Okuyucu"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "2D resim dosyasından yazdırılabilir geometri oluşturulmasını sağlar."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Ultimaker Biçim Paketleri yazmak için destek sağlar."
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Resim Okuyucu"
+msgid "UFP Writer"
+msgstr "UPF Yazıcı"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Ultimaker makineleri için makine eylemleri sunar (yatak dengeleme sihirbazı, yükseltme seçme vb.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Eski Cura sürümlerinden profilleri içe aktarmak için destek sağlar."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker makine eylemleri"
+msgid "Legacy Cura Profile Reader"
+msgstr "Eski Cura Profil Okuyucu"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "G-code’u bir sıkıştırılmış arşive yazar."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Yapılandırmaları Cura 4.3'ten Cura 4.4'e yükseltir."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Sıkıştırılmış G-code Yazıcısı"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "4.3'ten 4.4'e Sürüm Yükseltme"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Bellenim güncellemelerini denetler."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Yapılandırmaları Cura 2.1’den Cura 2.2’ye yükseltir."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Bellenim Güncelleme Denetleyicisi"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "2.1’den 2.2’ye Sürüm Yükseltme"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Anonim dilim bilgisi gönderir. Tercihlerden devre dışı bırakılabilir."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Yapılandırmaları Cura 4.1'den Cura 4.2'ye yükseltir."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Dilim bilgisi"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Sürüm 4.1'den 4.2'ye Yükseltme"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "XML tabanlı malzeme profillerini okuma ve yazma olanağı sağlar."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Malzeme Profilleri"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "Digital Library'ye bağlanarak Cura'nın Digital Library'deki dosyaları açmasına ve kaydetmesine olanak tanır."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Yapılandırmaları Cura 4.5'ten Cura 4.6'ya yükseltir."
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Ultimaker Digital Library"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "4.5'ten 4.6'ya Sürüm Yükseltme"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Yeni Cura paketleri bulun, yönetin ve kurun."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Yapılandırmaları Cura 3.3’ten Cura 3.4’ya yükseltir."
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Araç kutusu"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "3.3'dan 3.4'e Sürüm Yükseltme"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "G-code’u bir dosyaya yazar."
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "Yapılandırmaları Cura 4.8'den Cura 4.9'a yükseltir."
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code Yazıcı"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "4.8'den 4.9'a Sürüm Yükseltme"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Simülasyon görünümünü sunar."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Yapılandırmaları Cura 2.7’den Cura 3.0’a yükseltir."
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Simülasyon Görünümü"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "2.7’den 3.0’a Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Yapılandırmaları Cura 4.5'ten Cura 4.6'ya yükseltir."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Yapılandırmaları Cura 4.4'ten Cura 4.5'e yükseltir."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "4.5'ten 4.6'ya Sürüm Yükseltme"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "4.4'ten 4.5'e Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Yapılandırmaları Cura 2.5’ten Cura 2.6’ya yükseltir."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Yapılandırmaları Cura 3.0'dan Cura 3.1'e yükseltir."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "2.5’ten 2.6’ya Sürüm Yükseltme"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "3.0'dan 3.1'e Sürüm Yükseltme"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6110,115 +6277,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "4.6.0'dan 4.6.2'ye Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Yapılandırmaları Cura 4.7'den Cura 4.8'e yükseltir."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Yapılandırmaları Cura 2.6’dan Cura 2.7’ye yükseltir."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "4.7'den 4.8'e Sürüm Yükseltme"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "2.6’dan 2.7’ye Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Yapılandırmaları Cura 3.4’ten Cura 3.5’e yükseltir."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Yapılandırmaları Cura 4.2'den Cura 4.3'e yükseltir."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "3.4’ten 3.5’e Sürüm Yükseltme"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "4.2'den 4.3'e Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Yapılandırmaları Cura 2.1’den Cura 2.2’ye yükseltir."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Yapılandırmaları Cura 4.0’dan Cura 4.1’e yükseltir."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "2.1’den 2.2’ye Sürüm Yükseltme"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "4.0’dan 4.1’e Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Yapılandırmaları Cura 3.2’ten Cura 3.3’ya yükseltir."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Yapılandırmaları Cura 4.6.2'den Cura 4.7'ye yükseltir."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "3.2'dan 3.3'e Sürüm Yükseltme"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "4.6.2'den 4.7'ye Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "Yapılandırmaları Cura 4.8'den Cura 4.9'a yükseltir."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "Yapılandırmaları Cura 4.9'dan Cura 4.10'a yükseltir."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "4.8'den 4.9'a Sürüm Yükseltme"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "4.9'dan 4.10'a Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Yapılandırmaları Cura 4.6.2'den Cura 4.7'ye yükseltir."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Yapılandırmaları Cura 2.2’den Cura 2.4’e yükseltir."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "4.6.2'den 4.7'ye Sürüm Yükseltme"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "2.2’den 2.4’e Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Yapılandırmaları Cura 4.2'den Cura 4.3'e yükseltir."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Yapılandırmaları Cura 3.2’ten Cura 3.3’ya yükseltir."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "4.2'den 4.3'e Sürüm Yükseltme"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "3.2'dan 3.3'e Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Yapılandırmaları Cura 4.3'ten Cura 4.4'e yükseltir."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Yapılandırmaları Cura 2.5’ten Cura 2.6’ya yükseltir."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "4.3'ten 4.4'e Sürüm Yükseltme"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "2.5’ten 2.6’ya Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "Yapılandırmaları Cura 4.9'dan Cura 4.10'a yükseltir."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Yapılandırmaları Cura 3.5’ten Cura 4.0’a yükseltir."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "4.9'dan 4.10'a Sürüm Yükseltme"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "3.5’ten 4.0’a Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Yapılandırmaları Cura 2.7’den Cura 3.0’a yükseltir."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Yapılandırmaları Cura 3.4’ten Cura 3.5’e yükseltir."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "2.7’den 3.0’a Sürüm Yükseltme"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "3.4’ten 3.5’e Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Yapılandırmaları Cura 2.6’dan Cura 2.7’ye yükseltir."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Yapılandırmaları Cura 4.7'den Cura 4.8'e yükseltir."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "2.6’dan 2.7’ye Sürüm Yükseltme"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "4.7'den 4.8'e Sürüm Yükseltme"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6230,105 +6397,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "4.11'den 4.12'ye Sürüm Yükseltme"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Yapılandırmaları Cura 3.3’ten Cura 3.4’ya yükseltir."
+msgid "Backup and restore your configuration."
+msgstr "Yapılandırmanızı yedekleyin ve geri yükleyin."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "3.3'dan 3.4'e Sürüm Yükseltme"
+msgid "Cura Backups"
+msgstr "Cura Yedeklemeleri"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Yapılandırmaları Cura 3.0'dan Cura 3.1'e yükseltir."
+msgid "Provides support for importing Cura profiles."
+msgstr "Cura profillerinin içe aktarılması için destek sağlar."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "3.0'dan 3.1'e Sürüm Yükseltme"
+msgid "Cura Profile Reader"
+msgstr "Cura Profil Okuyucu"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Yapılandırmaları Cura 4.0’dan Cura 4.1’e yükseltir."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Anonim dilim bilgisi gönderir. Tercihlerden devre dışı bırakılabilir."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "4.0’dan 4.1’e Sürüm Yükseltme"
+msgid "Slice info"
+msgstr "Dilim bilgisi"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Yapılandırmaları Cura 4.4'ten Cura 4.5'e yükseltir."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "G-code dosyalarından profilleri içe aktarmak için destek sağlar."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "4.4'ten 4.5'e Sürüm Yükseltme"
+msgid "G-code Profile Reader"
+msgstr "G-code Profil Okuyucu"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Yapılandırmaları Cura 2.2’den Cura 2.4’e yükseltir."
+msgid "Writes g-code to a compressed archive."
+msgstr "G-code’u bir sıkıştırılmış arşive yazar."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "2.2’den 2.4’e Sürüm Yükseltme"
+msgid "Compressed G-code Writer"
+msgstr "Sıkıştırılmış G-code Yazıcısı"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Yapılandırmaları Cura 4.1'den Cura 4.2'ye yükseltir."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Kullanıcının oluşturduğu komut dosyalarına son işleme için izin veren uzantı"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Sürüm 4.1'den 4.2'ye Yükseltme"
+msgid "Post Processing"
+msgstr "Son İşleme"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Yapılandırmaları Cura 3.5’ten Cura 4.0’a yükseltir."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Belirli yerlerde desteğin yazdırılmasını engellemek için bir silici yüzey oluşturur"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "3.5’ten 4.0’a Sürüm Yükseltme"
+msgid "Support Eraser"
+msgstr "Destek Silici"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Ultimaker ağındaki yazıcılar için ağ bağlantılarını yönetir."
+msgid "Provides a preview stage in Cura."
+msgstr "Cura’da ön izleme aşaması sunar."
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker Ağ Bağlantısı"
+msgid "Preview Stage"
+msgstr "Öz İzleme Aşaması"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Model dosyalarını okuma desteği sağlar."
+msgid "Provides the X-Ray view."
+msgstr "Röntgen Görüntüsü sağlar."
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh Okuyucu"
+msgid "X-Ray View"
+msgstr "Röntgen Görüntüsü"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Ultimaker Biçim Paketlerinin okunması için destek sağlar."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Ultimaker makineleri için makine eylemleri sunar (yatak dengeleme sihirbazı, yükseltme seçme vb.)"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP Okuyucu"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker makine eylemleri"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6340,35 +6517,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "Gerçek Görünüm"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "3MF dosyalarının yazılması için destek sağlar."
+msgid "Allows loading and displaying G-code files."
+msgstr "G-code dosyalarının yüklenmesine ve görüntülenmesine olanak tanır."
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF Yazıcı"
+msgid "G-code Reader"
+msgstr "G-code Okuyucu"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Cura’da görüntüleme aşaması sunar."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Makine ayarlarının değiştirilmesini sağlar (yapı hacmi, nozül boyutu vb.)"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Görüntüleme Aşaması"
+msgid "Machine Settings Action"
+msgstr "Makine Ayarları eylemi"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Olası yazdırma sorunlarına karşı modelleri ve yazdırma yapılandırmasını kontrol eder ve öneriler verir."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "G-Code’ları kabul eder ve bir yazıcıya gönderir. Eklenti aynı zamanda üretici sürümünü güncelleyebilir."
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Model Kontrol Edici"
+msgid "USB printing"
+msgstr "USB yazdırma"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "Malzemeleri yazıcılarla senkronize et"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "Değişikliklerin etkili olması için {} uygulamasını kapatarak yeniden başlatmalısınız."
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "Senkronize ediliyor..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "Ultimaker hesabınızda değişiklik tespit edildi"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "Malzeme ve yazılım paketlerini hesabınızla senkronize etmek istiyor musunuz?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "Senkronize et"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "Reddet ve hesaptan kaldır"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "{} eklenti indirilemedi"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "Eklenti Lisans Anlaşması"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "Resim Dönüştürülüyor..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "Yapı levhasındaki milimetre cinsinden genişlik."
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "Mağaza"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "Pakette değişikliklerin geçerli olması için Cura’yı yeniden başlatmalısınız."
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "Yükle"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "Yüklü"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "Premium"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "Web Mağazasına Git"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "Malzeme ara"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "Uyumluluk"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "Makine"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "Baskı tepsisi"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "Destek"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "Kalite"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "Teknik Veri Sayfası"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "Güvenlik Veri Sayfası"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "Yazdırma Talimatları"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "Web sitesi"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "Yükleme ve güncelleme yapabilmek için <a href='%1'>oturum açın</a>"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>Malzeme makarası satın al</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "Güncelle"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "Güncelleniyor"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "Güncellendi"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "Geri"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "Eklentiler"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "Yüklü"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "Yeniden başlatıldığında kurulacak"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "Güncelleme yapabilmek için <a href='%1'>oturum açın</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "Eski Sürümü Yükle"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "Kaldır"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "Topluluk Katkıları"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "Topluluk Eklentileri"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "Genel Materyaller"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "Paketler alınıyor..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "Web sitesi"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "E-posta"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "Ultimaker Cura Enterprise için onaylı eklenti ve malzemeleri almak için lütfen oturum açın"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "Sürüm"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "Son güncelleme"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "İndirmeler"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "Yüklü eklentiler"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "Hiç eklenti yüklenmedi."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "Yüklü malzemeler"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "Hiç malzeme yüklenmedi."
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "Paketli eklentiler"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "Paketli malzemeler"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "Cura Paket veri tabanına bağlanılamadı. Lütfen bağlantınızı kontrol edin."
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "Paketi yüklemek için lisansı kabul etmeniz gerekir"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "Hesabınızda değişiklik var"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "Kapat"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "Aşağıdaki paketler eklenecek:"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "Aşağıdaki paketler uyumsuz Cura sürümü nedeniyle yüklenemiyor:"
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "Kaldırmayı onayla"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "Kullanımda olan materyalleri ve/veya profilleri kaldırıyorsunuz. Onay verirseniz aşağıdaki materyaller/profiller varsayılan değerlerine sıfırlanacaktır."
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "Malzemeler"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "Profiller"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "Onayla"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "Bu yazdırmada bazı şeyler sorunlu olabilir. Ayarlama için ipuçlarını görmek için tıklayın."
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "Düzlemsel nesnelerin işlenmesi için destek kitaplığı"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "Bazı profil ayarlarını özelleştirdiniz.\n"
+#~ "Profiller arasında geçiş yapıldıktan sonra bu değişiklikleri tutmak ister misiniz?\n"
+#~ "Alternatif olarak, '%1' üzerinden varsayılanları yüklemek için değişiklikleri silebilirsiniz."
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "&Yapı levhası"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "Oluştur"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "Çoğalt"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "Yazıcı: %1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "Profili geçerli ayarlar/geçersiz kılmalar ile güncelle"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "Tema:"
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "Bu değişikliklerinin geçerli olması için uygulamayı yeniden başlatmanız gerekecektir."
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "Daha fazla bilgi"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "Oluştur"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "Yazıcılarla Senkronize Et"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "Yazıcı"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "Birim"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "Çevrimiçi Sorun Giderme Kılavuzunu"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "Mağazadan daha fazla malzeme ekle"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "Tüm Modelleri Tüm Yapı Levhalarına Yerleştir"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "&Mağazayı Göster"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "Yeni Cura paketleri bulun, yönetin ve kurun."
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "Araç kutusu"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "Simülasyon görünümünü sunar."
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/tr_TR/fdmextruder.def.json.po b/resources/i18n/tr_TR/fdmextruder.def.json.po
index e4fc701181..7993fed613 100644
--- a/resources/i18n/tr_TR/fdmextruder.def.json.po
+++ b/resources/i18n/tr_TR/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:03+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Turkish\n"
diff --git a/resources/i18n/tr_TR/fdmprinter.def.json.po b/resources/i18n/tr_TR/fdmprinter.def.json.po
index f3362c7c9f..db4073f7ac 100644
--- a/resources/i18n/tr_TR/fdmprinter.def.json.po
+++ b/resources/i18n/tr_TR/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2022-01-10 12:00+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Turkish <info@lionbridge.com>, Turkish <info@bothof.nl>\n"
@@ -466,8 +466,8 @@ msgstr "Makinenin Başlığı ve Fan Poligonu"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "Yazıcı başlığının 2B taslağı (fan başlıkları dahil)."
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -740,6 +740,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "Besleyiciye malzeme veren çarkın çapı."
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "Kalite"
@@ -960,6 +970,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "Duvar sayısı. Bu değer, duvar kalınlığıyla hesaplandığında tam sayıya yuvarlanır."
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "Dış Duvar Sürme Mesafesi"
@@ -990,14 +1050,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "Geri çekmelerin sayısını ve kat edilen mesafeyi azaltmak için duvarların yazdırıldığı sırayı optimize edin. Çoğu parça, bunun etkinleştirilmesinden yararlanır, ancak bazılarının yararlanması için gerçekte daha uzun süre gerekebilir. Bu yüzden, yazdırma süresi tahminlerini optimizasyonlu ve optimizasyonsuz olarak karşılaştırın. Kenar, yapı levhası yapıştırması tipi olarak seçildiğinde ilk katman optimize edilmez."
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "Önce Dış Sonra İç Duvarlar"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "Etkinleştirilmişse, duvarları dıştan içe doğru yazdırır. ABS gibi yüksek viskoziteli plastik kullanılırken boyutsal kesinliğin artırılmasını sağlayabilir; öte yandan dış düzey baskı kalitesini, özellikle çıkmalı kirişlerde etkileyebilir."
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1010,94 +1080,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "Her katmanda ek duvar yazdırır. Bu şekilde dolgu ek duvarların arasında alır ve daha sağlam baskılar ortaya çıkar."
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "Duvar Çakışmalarının Telafi Edilmesi"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "Halihazırda duvarın olduğu bir yere yazdırılan bir duvarın parçaları için akışı telafi eder."
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "Dış Duvar Çakışmalarının Telafi Edilmesi"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "Halihazırda dış duvarın olduğu bir yere yazdırılan bir dış duvarın parçaları için akışı telafi eder."
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "İç Duvar Çakışmalarının Telafi Edilmesi"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "Halihazırda duvarın olduğu bir yere yazdırılan bir iç duvarın parçaları için akışı telafi eder."
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "Minimum Duvar Akışı"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "Bir duvar hattı için izin verilen en düşük yüzde akımdır. Duvar çakışması, mevcut bir duvara yakın duruyorsa bir duvarın akışını azaltır. Akışları bu değerden düşük olan duvarların yerine hareket hamlesi konacaktır. Bu ayarı kullanırken duvar çakışma telafisini açmanız ve iç duvardan önce dış duvarı yazdırmanız gerekir."
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "Geri Çekmeyi Tercih Et"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "Geri çekme etkinleştirildiğinde, akışları minimum akış eşiğinin altındaki duvarların yerini alacak hareketleri taramak yerine geri çekme kullanılır."
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "Duvarlar Arasındaki Boşlukları Doldur"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "Duvarların sığmadığı yerlerde duvarlar arasında kalan boşlukları doldurur."
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "Hiçbir yerde"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "İnce Duvarları Yazdır"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "Her bölüm"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "Yatay olarak nozül boyutundan daha ince olan model parçalarını yazdırır."
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "Küçük Boşlukların Filtrelenmesi"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "Modelin dışındaki damlalarını azaltmak için küçük boşlukları filtreleyin."
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "İnce Duvarları Yazdır"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "Yatay olarak nozül boyutundan daha ince olan model parçalarını yazdırır."
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2199,6 +2259,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "Malzemenin soğudukça büzülmesini telafi etmek için model bu faktöre göre ölçeklenecektir."
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "Kristalli Malzeme"
@@ -2709,24 +2789,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "Yapı levhasına daha iyi yapışma sağlamak ve yazdırmanın genel başarı oranını artırmak için ilk birkaç katman modelin kalan kısmından daha yavaş yazdırılır. Bu hız katmanlar üzerinde giderek artar."
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "Filaman Akışını Eşitle"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "Saniye başına geçirilen malzeme sayısının aynı kalabilmesi için normalden ince hatları daha hızlı yazdırın. Modelinizdeki parçalar ayarlarda belirtilenden daha küçük hat genişliği olan hatların yazdırılmasını gerektirebilir. Bu ayar bu tür hatlar için hız değişikliklerini kontrol eder."
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "Akışı Eşitlemek için Maksimum Hız"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "Akışı eşitlemek için yazdırma hızını ayarlarken kullanılan maksimum yazdırma hızı."
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4464,6 +4534,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "Etek/kenar/radye yazdırmak için kullanılacak ekstruder Çoklu ekstrüzyon işlemi için kullanılır."
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Etek Hattı Sayısı"
@@ -4628,6 +4738,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "Üst radye katmanları için radye hatları arasındaki mesafe. Yüzeyin katı olabilmesi için aralık hat genişliğine eşit olmalıdır."
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Radye Orta Kalınlığı"
@@ -5128,6 +5248,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "Maksimum Çözünürlük ayarı için çözünürlük azaltıldığında izin verilen maksimum sapma. Bu değeri artırırsanız baskının doğruluğu azalacak ancak g kodu daha küçük olacaktır. Maksimum Sapma, Maksimum Çözünürlük için sınırdır, dolayısıyla iki değer çelişirse Maksimum Sapma her zaman doğru kabul edilir."
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "Özel Modlar"
@@ -6422,6 +6552,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "İlk katman üzerindeki küçük özellikler normal baskı hızının bu yüzdesinde basılacaktır. Daha yavaş baskı, yapışma ve doğruluğu artırmaya yardımcı olabilir."
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "Komut Satırı Ayarları"
@@ -6481,6 +6641,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Modeli dosyadan indirirken modele uygulanacak olan dönüşüm matrisi."
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "Yazıcı başlığının 2B taslağı (fan başlıkları dahil)."
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "Önce Dış Sonra İç Duvarlar"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "Etkinleştirilmişse, duvarları dıştan içe doğru yazdırır. ABS gibi yüksek viskoziteli plastik kullanılırken boyutsal kesinliğin artırılmasını sağlayabilir; öte yandan dış düzey baskı kalitesini, özellikle çıkmalı kirişlerde etkileyebilir."
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "Duvar Çakışmalarının Telafi Edilmesi"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "Halihazırda duvarın olduğu bir yere yazdırılan bir duvarın parçaları için akışı telafi eder."
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "Dış Duvar Çakışmalarının Telafi Edilmesi"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "Halihazırda dış duvarın olduğu bir yere yazdırılan bir dış duvarın parçaları için akışı telafi eder."
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "İç Duvar Çakışmalarının Telafi Edilmesi"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "Halihazırda duvarın olduğu bir yere yazdırılan bir iç duvarın parçaları için akışı telafi eder."
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "Minimum Duvar Akışı"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "Bir duvar hattı için izin verilen en düşük yüzde akımdır. Duvar çakışması, mevcut bir duvara yakın duruyorsa bir duvarın akışını azaltır. Akışları bu değerden düşük olan duvarların yerine hareket hamlesi konacaktır. Bu ayarı kullanırken duvar çakışma telafisini açmanız ve iç duvardan önce dış duvarı yazdırmanız gerekir."
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "Geri Çekmeyi Tercih Et"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "Geri çekme etkinleştirildiğinde, akışları minimum akış eşiğinin altındaki duvarların yerini alacak hareketleri taramak yerine geri çekme kullanılır."
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "Duvarlar Arasındaki Boşlukları Doldur"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "Duvarların sığmadığı yerlerde duvarlar arasında kalan boşlukları doldurur."
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "Hiçbir yerde"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "Her bölüm"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "Küçük Boşlukların Filtrelenmesi"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "Modelin dışındaki damlalarını azaltmak için küçük boşlukları filtreleyin."
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "Filaman Akışını Eşitle"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "Saniye başına geçirilen malzeme sayısının aynı kalabilmesi için normalden ince hatları daha hızlı yazdırın. Modelinizdeki parçalar ayarlarda belirtilenden daha küçük hat genişliği olan hatların yazdırılmasını gerektirebilir. Bu ayar bu tür hatlar için hız değişikliklerini kontrol eder."
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "Akışı Eşitlemek için Maksimum Hız"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "Akışı eşitlemek için yazdırma hızını ayarlarken kullanılan maksimum yazdırma hızı."
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "ile ayrılan, başlangıçta yürütülecek G-code komutları \\n."
diff --git a/resources/i18n/zh_CN/cura.po b/resources/i18n/zh_CN/cura.po
index ab248b8cae..fff194aae0 100644
--- a/resources/i18n/zh_CN/cura.po
+++ b/resources/i18n/zh_CN/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2021-04-16 15:04+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Chinese <info@lionbridge.com>, PCDotFan <pc@edu.ax>, Chinese <info@bothof.nl>\n"
@@ -17,1507 +17,276 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 2.4.1\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "不能从用户数据目录创建存档: {}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "备份"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "试图在没有适当数据或元数据的情况下恢复Cura备份。"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "尝试恢复的 Cura 备份版本高于当前版本。"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "尝试恢复 Cura 备份时出现以下错误："
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "请在开始打印之前将材料配置文件与您的打印机同步。"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "新材料已装载"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "同步材料与打印机"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "详细了解"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "未能将材料存档保存到 {}："
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "未能保存材料存档"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "未知错误。"
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "由于“打印序列”设置的值，成形空间体积高度已被减少，以防止十字轴与打印模型相冲突。"
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "成形空间体积"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "是否确实要删除 {0}？此操作无法撤消！"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "未覆盖"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "未知"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "无法连接到下列打印机，因为这些打印机已在组中"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "可用的网络打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "准备"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura 配置文件"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "自定义配置文件"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "打开压缩三角网格"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "所有支持的文件类型 ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA 数据资源交换"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "所有文件 (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "视觉"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "视觉配置文件用于打印视觉原型和模型，可实现出色的视觉效果和表面质量。"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "工程配置文件用于打印功能性原型和最终用途部件，可提高准确性和减小公差。"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "草稿"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "草稿配置文件用于打印初始原型和概念验证，可大大缩短打印时间。"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "自定义材料"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "自定义"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "登录失败"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "正在为模型寻找新位置"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "正在寻找位置"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "无法在成形空间体积内放下全部模型"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "找不到位置"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "无法创建材料存档以与打印机同步。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "无法加载材料存档以与打印机同步。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "来自 Digital Factory 的响应似乎已损坏。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "来自 Digital Factory 的响应缺少重要信息。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "无法通过 Digital Factory 为某些打印机同步材料配置文件。"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "无法连接至 Digital Factory。"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "正在载入打印机..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "正在设置偏好设置..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "正在初始化当前机器..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "正在初始化机器管理器..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "正在初始化成形空间体积..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "正在设置场景..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "正在载入界面..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "正在初始化引擎..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "一次只能加载一个 G-code 文件。{0} 已跳过导入"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "警告"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "如果加载 G-code，则无法打开其他任何文件。{0} 已跳过导入"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "错误"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "跳过"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "关闭"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "下一步"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "完成"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "添加"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "取消"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "组 ＃{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "外壁"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "内壁"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "表层"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "填充"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "支撑填充"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "支撑接触面"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "支撑"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Skirt"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "装填塔"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "移动"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "回抽"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "其它"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "无法打开版本说明。"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura 无法启动"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>糟糕，Ultimaker Cura 似乎遇到了问题。</p></b>\n"
-"                    <p>在启动时发生了不可修复的错误。这可能是因某些配置文件出错导致的。建议您备份并重置配置。</p>\n"
-"                    <p>您可在配置文件夹中找到备份。</p>\n"
-"                    <p>请向我们发送此错误报告，以便解决问题。</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "向 Ultimaker 发送错误报告"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "显示详细的错误报告"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "显示配置文件夹"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "备份并重置配置"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "错误报告"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Cura 发生了严重错误。请将这份错误报告发送给我们以便修复问题</p></b>\n"
-"            <p>请使用“发送报告”按钮将错误报告自动发布到我们的服务器</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "系统信息"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "未知"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Cura 版本"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Cura 语言"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "操作系统语言"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "平台"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qt 版本"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQt 版本"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "尚未初始化<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGL 版本： {version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL 供应商： {vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL 渲染器： {renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "错误追溯"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "日志"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "发送报告"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "无法开始新的登录过程。请检查是否仍在尝试进行另一登录。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "无法连接 Ultimaker 帐户服务器。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "登录失败"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "所提供的状态不正确。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "使用帐户服务器进行身份验证超时。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "在授权此应用程序时，须提供所需权限。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "尝试登录时出现意外情况，请重试。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "无法读取响应。"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "复制并放置模型"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "放置模型"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "放置模型"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "不支持"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "喷嘴"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "已根据挤出机的当前可用性更改设置："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "设置已更新"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "挤出机已禁用"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "文件已存在"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "文件 <filename>{0}</filename> 已存在。您确定要覆盖它吗？"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "文件 URL 无效："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "无法将配置文件导出至<filename> {0} </filename>： <message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "无法将配置文件导出至<filename> {0} </filename>： 写入器插件报告故障。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "配置文件已导出至：<filename> {0} </filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "导出成功"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "无法从 <filename>{0}</filename> 导入配置文件：{1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "无法在添加打印机前从 <filename>{0}</filename> 导入配置文件。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "没有可导入文件 <filename>{0}</filename> 的自定义配置文件"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "无法从 <filename>{0}</filename> 导入配置文件："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "此配置文件 <filename>{0}</filename> 包含错误数据，无法导入。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "无法从 <filename>{0}</filename> 导入配置文件："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "已成功导入配置文件 {0}。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "文件 {0} 不包含任何有效的配置文件。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "配置 {0} 文件类型未知或已损坏。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "自定义配置文件"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "配置文件缺少打印质量类型定义。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "尚无处于活动状态的打印机。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "无法添加配置文件。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "质量类型“{0}”与当前有效的机器定义“{1}”不兼容。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "警告：配置文件不可见，因为其质量类型“{0}”对当前配置不可用。请切换到可使用此质量类型的材料/喷嘴组合。"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "单一模型设置"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "设置对每个模型的单独设定"
+msgid "glTF Binary"
+msgstr "glTF 二进制"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura 配置文件"
+msgid "glTF Embedded JSON"
+msgstr "glTF 嵌入式 JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D 文件"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "尝试恢复您的备份时出错。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "备份"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "上传您的备份时出错。"
+msgid "Stanford Triangle Format"
+msgstr "斯坦福三角格式"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "正在创建您的备份..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "压缩 COLLADA 数据资源交换"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "创建您的备份时出错。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "无法获取更新信息。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "正在上传您的备份..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "您的 {machine_name} 可能有新功能或错误修复可用！如果打印机上的固件还不是最新版本，建议将其更新为 {latest_version} 版。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "您的备份已完成上传。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "新 %s 稳定固件可用"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "备份超过了最大文件大小。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "如何更新"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "管理备份"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "打印机设置"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "支撑拦截器"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "创建一个不打印支撑的体积。"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "可移动磁盘"
+msgid "Monitor"
+msgstr "监控"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "保存至可移动磁盘"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "保存到可移动磁盘 {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "没有可进行写入的文件格式！"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "保存到可移动磁盘 <filename> {0} </filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "正在保存"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "无法保存到 <filename>{0}</filename>：<message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "尝试写入到 {device} 时找不到文件名。"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "无法保存到可移动磁盘 {0}：{1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "错误"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "保存到可移动磁盘 {0} ：{1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "文件已保存"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "弹出"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "弹出可移动设备 {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "已弹出 {0}。现在，您可以安全地拔出磁盘。"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "安全移除硬件"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "无法弹出 {0}，另一个程序可能正在使用磁盘。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "更新固件"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 配置文件"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "推荐"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "自定义"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "项目文件 <filename>{0}</filename> 包含未知机器类型 <message>{1}</message>。无法导入机器。将改为导入模型。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "打开项目文件"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "突然无法访问项目文件 <filename>{0}</filename>：<message>{1}</message>。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "无法打开项目文件"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "项目文件 <filename>{0}</filename> 损坏: <message>{1}</message>。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "项目文件 <filename>{0}</filename> 是用此 Ultimaker Cura 版本未识别的配置文件制作的。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF 文件"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "无法写入到 UFP 文件："
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28
-#: /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker 格式包"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "GCode 文件"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "预览"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "透视视图"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "正在处理层"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
-msgctxt "@info:title"
-msgid "Information"
-msgstr "信息"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "发生意外错误，切片失败。请于问题跟踪器上报告错误。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "切片失败"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "报告错误"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "在 Ultimaker Cura 问题跟踪器上报告错误。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "无法使用当前材料进行切片，因为该材料与所选机器或配置不兼容。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "无法切片"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "无法使用当前设置进行切片。以下设置存在错误：{0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "因部分特定模型设置而无法切片。 以下设置在一个或多个模型上存在错误： {error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "无法切片（原因：主塔或主位置无效）。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "无法切片，因为存在与已禁用挤出机 %s 相关联的对象。"
+msgid "Warning"
+msgstr "警告"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"请检查设置并检查您的模型是否：\n"
-"- 适合构建体积\n"
-"- 分配给了已启用的挤出器\n"
-"- 尚未全部设置为修改器网格"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "可移动磁盘"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "AMF 文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "压缩 G-code 文件"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "后期处理"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "修改 G-Code"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB 联机打印"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "通过 USB 联机打印"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "通过 USB 联机打印"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "通过 USB 连接"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker 格式包"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "正在进行 USB 打印，关闭 Cura 将停止此打印。您确定吗？"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "正在进行打印在上一次打印完成之前，Cura 无法通过 USB 启动另一次打印。"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "正在进行打印"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "准备"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "解析 G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-code 详细信息"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "发送文件之前，请确保 G-code 适用于当前打印机和打印机配置。当前 G-code 文件可能不准确。"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G 文件"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG 图像"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG 图像"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG 图像"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP 图像"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF 图像"
+msgid "Per Model Settings"
+msgstr "单一模型设置"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "调平打印平台"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "设置对每个模型的单独设定"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "选择升级"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter 不支持文本模式。"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "无法获取更新信息。"
+msgid "Update Firmware"
+msgstr "更新固件"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "您的 {machine_name} 可能有新功能或错误修复可用！如果打印机上的固件还不是最新版本，建议将其更新为 {latest_version} 版。"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "新 %s 稳定固件可用"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "如何更新"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "无法读取示例数据文件。"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "需要退出并重新启动 {}，然后更改才能生效。"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "正在同步..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "检测到您的 Ultimaker 帐户有更改"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "是否要与您的帐户同步材料和软件包?"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "同步"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "拒绝并从帐户中删除"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} 个插件下载失败"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "拒绝"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "同意"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "插件许可协议"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter 不支持非文本模式。"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "导出前请先准备 G-code。"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "启用“单线打印”后，Cura 将无法准确地显示打印层。"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura 已检测到材料配置文件尚未安装到组 {0} 中的主机打印机上。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "仿真视图"
+msgid "Sending materials to printer"
+msgstr "正在将材料发送到打印机"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "由于需要先切片，因此未显示任何内容。"
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "您正在尝试连接到 {0}，但它不是组中的主机。您可以访问网页，将其配置为组主机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "无层可显示"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "不再显示此消息"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "分层视图"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "通过网络打印"
+msgid "Not a group host"
+msgstr "非组中的主机"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "通过网络打印"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "配置组"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "已通过网络连接"
+msgid "Sending Print Job"
+msgstr "发送打印作业"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "明天"
+msgid "Uploading print job to printer."
+msgstr "正在将打印作业上传至打印机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "今天"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "打印作业队列已满。打印机无法接受新作业。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "通过网络连接"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "队列已满"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "请等待当前作业完成发送。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "打印错误"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "打印作业已成功发送到打印机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "数据已发送"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "您正在尝试连接未运行 Ultimaker Connect 的打印机。请将打印机更新至最新固件。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "请更新升级打印机"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "打印作业队列已满。打印机无法接受新作业。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "队列已满"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "发送打印作业"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "正在将打印作业上传至打印机。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura 已检测到材料配置文件尚未安装到组 {0} 中的主机打印机上。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "正在将材料发送到打印机"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "无法将数据上传到打印机。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "网络错误"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "您正在尝试连接到 {0}，但它不是组中的主机。您可以访问网页，将其配置为组主机。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "非组中的主机"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "配置组"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1527,134 +296,153 @@ msgstr ""
 "未能通过云连接您的打印机 <b>{printer_name}</b>。\n"
 "只需将您的打印机连接到 Digital Factory，即可随时随地管理您的打印作业队列并监控您的打印结果"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "是否进行云打印？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "开始"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "了解详情"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "通过云打印"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "您正在尝试连接未运行 Ultimaker Connect 的打印机。请将打印机更新至最新固件。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "请更新升级打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "无法将数据上传到打印机。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "网络错误"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "通过网络打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "通过云打印"
+msgid "Print over network"
+msgstr "通过网络打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "通过云连接"
+msgid "Connected over the network"
+msgstr "已通过网络连接"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "监控打印"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "明天"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "在 Ultimaker Digital Factory 中跟踪打印"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "今天"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "上传打印作业时出现未知错误代码：{0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "通过网络连接"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "从您的 Ultimaker 帐户中检测到新的打印机"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "正在从您的帐户添加打印机 {name} ({model})"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
 msgid_plural "... and {0} others"
 msgstr[0] "... 和另外 {0} 台"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "从 Digital Factory 添加的打印机："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "某些打印机无云连接可用"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "这些打印机未链接到 Digital Factory："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "要建立连接，请访问 {website_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "保留打印机配置"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "删除打印机"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "将删除 {printer_name}，直到下次帐户同步为止。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "要永久删除 {printer_name}，请访问 {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "是否确实要暂时删除 {printer_name}？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "是否删除打印机？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1667,7 +455,7 @@ msgstr[0] ""
 "您即将从 Cura 中删除 {0} 台打印机。此操作无法撤消。\n"
 "是否确实要继续？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1676,2075 +464,3119 @@ msgstr ""
 "您即将从 Cura 中删除所有打印机。此操作无法撤消。\n"
 "是否确定继续？"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "打开压缩三角网格"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "通过云打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA 数据资源交换"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "通过云打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF 二进制"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "通过云连接"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF 嵌入式 JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "监控打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "斯坦福三角格式"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "在 Ultimaker Digital Factory 中跟踪打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "压缩 COLLADA 数据资源交换"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "上传打印作业时出现未知错误代码：{0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "三维模型的助理"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "突出显示的区域指示缺少或多余的表面。修复模型，并再次在 Cura 中打开。"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>由于模型的大小和材质的配置，一个或多个3D模型可能无法最优地打印:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>找出如何确保最好的打印质量和可靠性.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">查看打印质量指南</a></p>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "启用“单线打印”后，Cura 将无法准确地显示打印层。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "模型错误"
+msgid "Simulation View"
+msgstr "仿真视图"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "实体视图"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "由于需要先切片，因此未显示任何内容。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "无层可显示"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "不再显示此消息"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "分层视图"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter 不支持非文本模式。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "导出前请先准备 G-code。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "GCode 文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "写入 3mf 文件时出错。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "3MF 编写器插件已损坏。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "没有可写入的工作区。请先添加打印机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "没有在此处写入工作区的权限。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "操作系统不允许向此位置或用此文件名保存项目文件。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "3MF 文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Cura 项目 3MF 文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "监控"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "压缩 G-code 文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "发生意外错误，切片失败。请于问题跟踪器上报告错误。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "切片失败"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "报告错误"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "在 Ultimaker Cura 问题跟踪器上报告错误。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "无法使用当前材料进行切片，因为该材料与所选机器或配置不兼容。"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "三维模型的助理"
+msgid "Unable to slice"
+msgstr "无法切片"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "无法使用当前设置进行切片。以下设置存在错误：{0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "因部分特定模型设置而无法切片。 以下设置在一个或多个模型上存在错误： {error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "无法切片（原因：主塔或主位置无效）。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "无法切片，因为存在与已禁用挤出机 %s 相关联的对象。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>由于模型的大小和材质的配置，一个或多个3D模型可能无法最优地打印:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>找出如何确保最好的打印质量和可靠性.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">查看打印质量指南</a></p>"
+"请检查设置并检查您的模型是否：\n"
+"- 适合构建体积\n"
+"- 分配给了已启用的挤出器\n"
+"- 尚未全部设置为修改器网格"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "网格类型"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "正在处理层"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "正常模式"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "信息"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "打印为支撑"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D 文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "修改重叠设置"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG 图像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "不支持重叠"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG 图像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "仅填充网格"
+msgid "PNG Image"
+msgstr "PNG 图像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "切割网格"
+msgid "BMP Image"
+msgstr "BMP 图像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "选择设置"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF 图像"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "选择对此模型的自定义设置"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "喷嘴"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "筛选..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "项目文件 <filename>{0}</filename> 包含未知机器类型 <message>{1}</message>。无法导入机器。将改为导入模型。"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "显示全部"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "打开项目文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura 备份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "突然无法访问项目文件 <filename>{0}</filename>：<message>{1}</message>。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura 版本"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "无法打开项目文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "机器"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "项目文件 <filename>{0}</filename> 损坏: <message>{1}</message>。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "材料"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "项目文件 <filename>{0}</filename> 是用此 Ultimaker Cura 版本未识别的配置文件制作的。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "配置文件"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "推荐"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "插件"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "自定义"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "想要更多？"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "3MF 文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "立即备份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "无法写入到 UFP 文件："
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "自动备份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 配置文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "在 Cura 每天启动时自动创建备份。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "备份"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "恢复"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "上传您的备份时出错。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "删除备份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "正在创建您的备份..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "您确定要删除此备份吗？此操作无法撤销。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "创建您的备份时出错。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "恢复备份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "正在上传您的备份..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "您需要重新启动 Cura 才能恢复备份。您要立即关闭 Cura 吗？"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "您的备份已完成上传。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "备份并同步您的 Cura 设置。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "备份超过了最大文件大小。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "登录"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "管理备份"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "我的备份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "备份"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "您目前没有任何备份。使用“立即备份”按钮创建一个备份。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "尝试恢复您的备份时出错。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "在预览阶段，将限制为 5 个可见备份。移除一个备份以查看更早的备份。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "无法读取示例数据文件。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "打印机设置"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter 不支持文本模式。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (宽度)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "后期处理"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "修改 G-Code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (深度)"
+msgid "Support Blocker"
+msgstr "支撑拦截器"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (高度)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "创建一个不打印支撑的体积。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "打印平台形状"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "预览"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "置中"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "透视视图"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "加热床"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "调平打印平台"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "加热的构建体积"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "选择升级"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-code 风格"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "打印头设置"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X 最小值"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y 最小值"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X 最大值"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y 最大值"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "十字轴高度"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "挤出机数目"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "将挤出器偏移量应用于 GCode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "突出显示的区域指示缺少或多余的表面。修复模型，并再次在 Cura 中打开。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "开始 G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "模型错误"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "结束 G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "详细了解"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "喷嘴设置"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "实体视图"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "喷嘴孔径"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "解析 G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "兼容的材料直径"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-code 详细信息"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "喷嘴偏移 X"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "发送文件之前，请确保 G-code 适用于当前打印机和打印机配置。当前 G-code 文件可能不准确。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "喷嘴偏移 Y"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G 文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "冷却风扇数量"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "打印机设置"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "挤出机的开始 G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB 联机打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "挤出机的结束 G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "通过 USB 联机打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "通过 USB 联机打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "更新固件"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "通过 USB 连接"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "固件是直接在 3D 打印机上运行的一个软件。此固件控制步进电机，调节温度并最终使打印机正常工作。"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "正在进行 USB 打印，关闭 Cura 将停止此打印。您确定吗？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "正在进行打印在上一次打印完成之前，Cura 无法通过 USB 启动另一次打印。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "正在进行打印"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "正在载入打印机..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "正在设置偏好设置..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "正在初始化当前机器..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "正在初始化机器管理器..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "正在初始化成形空间体积..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "正在设置场景..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "正在载入界面..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "正在初始化引擎..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "一次只能加载一个 G-code 文件。{0} 已跳过导入"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "如果加载 G-code，则无法打开其他任何文件。{0} 已跳过导入"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "新打印机出厂配备的固件完全可以正常使用，但新版本往往具有更多的新功能和改进。"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "自动升级固件"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "视觉"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "上传自定义固件"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "视觉配置文件用于打印视觉原型和模型，可实现出色的视觉效果和表面质量。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "未连接打印机，无法更新固件。"
+msgid "Engineering"
+msgstr "Engineering"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "工程配置文件用于打印功能性原型和最终用途部件，可提高准确性和减小公差。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "与打印机间的连接不支持固件更新，因此无法更新固件。"
+msgid "Draft"
+msgstr "草稿"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "选择自定义固件"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "草稿配置文件用于打印初始原型和概念验证，可大大缩短打印时间。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "固件升级"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "未覆盖"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "是否确实要删除 {0}？此操作无法撤消！"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "更新固件中..."
+msgid "Unknown"
+msgstr "未知"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "固件更新已完成。"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "无法连接到下列打印机，因为这些打印机已在组中"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "由于未知错误，固件更新失败。"
+msgid "Available networked printers"
+msgstr "可用的网络打印机"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "已计算"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "请在开始打印之前将材料配置文件与您的打印机同步。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "新材料已装载"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "由于通信错误，导致固件升级失败。"
+msgid "Custom Material"
+msgstr "自定义材料"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "由于输入/输出错误，导致固件升级失败。"
+msgid "Custom"
+msgstr "自定义"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "由于固件丢失，导致固件升级失败。"
+msgid "Custom profiles"
+msgstr "自定义配置文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "打开项目"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "所有支持的文件类型 ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "更新已有配置"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "所有文件 (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "新建"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "无法创建材料存档以与打印机同步。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "摘要 - Cura 项目"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "无法加载材料存档以与打印机同步。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "打印机设置"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "来自 Digital Factory 的响应似乎已损坏。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "机器的设置冲突应如何解决？"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "来自 Digital Factory 的响应缺少重要信息。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "类型"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "无法通过 Digital Factory 为某些打印机同步材料配置文件。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "打印机组"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "无法连接至 Digital Factory。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "配置文件设置"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "不能从用户数据目录创建存档: {}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "配置文件中的冲突如何解决？"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "试图在没有适当数据或元数据的情况下恢复Cura备份。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "名字"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "尝试恢复的 Cura 备份版本高于当前版本。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "尝试恢复 Cura 备份时出现以下错误："
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "不在配置文件中"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "正在为模型寻找新位置"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 重写"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "正在寻找位置"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "衍生自"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "无法在成形空间体积内放下全部模型"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 重写"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "找不到位置"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "材料设置"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "登录失败"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "材料的设置冲突应如何解决？"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "外壁"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "设置可见性"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "内壁"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "模式"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "表层"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "可见设置："
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "填充"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 / %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "支撑填充"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "加载项目将清除打印平台上的所有模型。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "支撑接触面"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "打开"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "支撑"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "后期处理插件"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Skirt"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "后期处理脚本"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "装填塔"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "添加一个脚本"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "移动"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "回抽"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "其它"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "设置"
+msgid "Group #{group_nr}"
+msgstr "组 ＃{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "更改处于活动状态的后期处理脚本。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "无法打开版本说明。"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "以下脚本处于活动状态："
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "跳过"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "转换图像..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "关闭"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "每个像素与底板的最大距离"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "添加"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "高度 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "完成"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "距离打印平台的底板高度，以毫米为单位。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "取消"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "底板 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "下一步"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "打印平台宽度，以毫米为单位。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "由于“打印序列”设置的值，成形空间体积高度已被减少，以防止十字轴与打印模型相冲突。"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "宽度 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "成形空间体积"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "打印平台深度，以毫米为单位"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "未能将材料存档保存到 {}："
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "深度 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "未能保存材料存档"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "在影像浮雕中，为了阻挡更多光源通过，深色像素应对应于较厚的位置。在高度图中，浅色像素代表着更高的地形，因此浅色像素对应于生成的 3D 模型中较厚的位置。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "未知错误。"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "颜色越深厚度越大"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "文件已存在"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "颜色越浅厚度越大"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "文件 <filename>{0}</filename> 已存在。您确定要覆盖它吗？"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "对于隐雕，提供一个用于半透明的简单对数模型。对于高度图，像素值与高度线性对应。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "文件 URL 无效："
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "线性"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "不支持"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "半透明"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "穿透 1 毫米厚的打印件的光线百分比。降低此值将增大图像暗区中的对比度并减小图像亮区中的对比度。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "已根据挤出机的当前可用性更改设置："
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1 毫米透射率 (%)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "设置已更新"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "要应用到图像的平滑量。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "挤出机已禁用"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "平滑"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "无法将配置文件导出至<filename> {0} </filename>： <message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "确定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "无法将配置文件导出至<filename> {0} </filename>： 写入器插件报告故障。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "请选择适用于 Ultimaker Original 的升级文件"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "配置文件已导出至：<filename> {0} </filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "热床（官方版本或自制）"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "导出成功"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "打印平台调平"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "无法从 <filename>{0}</filename> 导入配置文件：{1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "为了确保打印质量出色，您现在可以开始调整您的打印平台。当您点击「移动到下一个位置」时，喷嘴将移动到可以调节的不同位置。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "无法在添加打印机前从 <filename>{0}</filename> 导入配置文件。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "在打印头停止的每一个位置下方插入一张纸，并调整平台高度。当纸张恰好被喷嘴的尖端轻微压住时，此时打印平台的高度已被正确校准。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "没有可导入文件 <filename>{0}</filename> 的自定义配置文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "开始进行打印平台调平"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "无法从 <filename>{0}</filename> 导入配置文件："
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "移动到下一个位置"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "此配置文件 <filename>{0}</filename> 包含错误数据，无法导入。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "更多关于匿名数据收集的信息"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "无法从 <filename>{0}</filename> 导入配置文件："
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据。以下是所有数据分享的示例："
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "已成功导入配置文件 {0}。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "我不想发送匿名数据"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "文件 {0} 不包含任何有效的配置文件。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "允许发送匿名数据"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "配置 {0} 文件类型未知或已损坏。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "市场"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "自定义配置文件"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "在包装更改生效之前，您需要重新启动Cura。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "配置文件缺少打印质量类型定义。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "退出 %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "尚无处于活动状态的打印机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "安装"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "无法添加配置文件。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "已安装"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "质量类型“{0}”与当前有效的机器定义“{1}”不兼容。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "高级"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "警告：配置文件不可见，因为其质量类型“{0}”对当前配置不可用。请切换到可使用此质量类型的材料/喷嘴组合。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "前往网上市场"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "复制并放置模型"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "搜索材料"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "放置模型"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "兼容性"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "放置模型"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "机器"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "无法开始新的登录过程。请检查是否仍在尝试进行另一登录。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "打印平台"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "无法连接 Ultimaker 帐户服务器。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "支持"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "登录失败"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "质量"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "无法读取响应。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "技术数据表"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "所提供的状态不正确。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "安全数据表"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "使用帐户服务器进行身份验证超时。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "打印指南"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "在授权此应用程序时，须提供所需权限。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "网站"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "尝试登录时出现意外情况，请重试。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "安装或更新需要<a href='%1'>登录</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura 无法启动"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>购买材料线轴</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>糟糕，Ultimaker Cura 似乎遇到了问题。</p></b>\n"
+"                    <p>在启动时发生了不可修复的错误。这可能是因某些配置文件出错导致的。建议您备份并重置配置。</p>\n"
+"                    <p>您可在配置文件夹中找到备份。</p>\n"
+"                    <p>请向我们发送此错误报告，以便解决问题。</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "更新"
+msgid "Send crash report to Ultimaker"
+msgstr "向 Ultimaker 发送错误报告"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "更新"
+msgid "Show detailed crash report"
+msgstr "显示详细的错误报告"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "更新"
+msgid "Show configuration folder"
+msgstr "显示配置文件夹"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "背部"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "插件"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "材料"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "安装"
+msgid "Backup and Reset Configuration"
+msgstr "备份并重置配置"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "将安装后重新启动"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "错误报告"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "更新需要<a href='%1'>登录</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Cura 发生了严重错误。请将这份错误报告发送给我们以便修复问题</p></b>\n"
+"            <p>请使用“发送报告”按钮将错误报告自动发布到我们的服务器</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "降级"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "系统信息"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "卸载"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "未知"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "社区贡献"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Cura 版本"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "社区插件"
+msgid "Cura language"
+msgstr "Cura 语言"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "通用材料"
+msgid "OS language"
+msgstr "操作系统语言"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "获取包..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "平台"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "网站"
+msgid "Qt version"
+msgstr "Qt 版本"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "电子邮件"
+msgid "PyQt version"
+msgstr "PyQt 版本"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "请登录以获取经验证适用于 Ultimaker Cura Enterprise 的插件和材料"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "版本"
+msgid "Not yet initialized<br/>"
+msgstr "尚未初始化<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "更新日期"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGL 版本： {version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "品牌"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL 供应商： {vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "下载项"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL 渲染器： {renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "已安装的插件"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "错误追溯"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "尚未安装任何插件。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "日志"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "已安装的材料"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "发送报告"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "尚未安装任何材料。"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"请确保您的打印机已连接：\n"
+"- 检查打印机是否已启动。\n"
+"- 检查打印机是否连接至网络。\n"
+"- 检查您是否已登录查找云连接的打印机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "已捆绑的插件"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "请将打印机连接到网络。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "已捆绑的材料"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "查看联机用户手册"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "无法连接到Cura包数据库。请检查您的连接。"
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "为了从 Cura 监控您的打印，请连接打印机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "需要接受许可证才能安装该程序包"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "选择对此模型的自定义设置"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "您的帐户有更改"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "筛选..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "解除"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "显示全部"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "下一步"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "网格类型"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "将添加以下程序包："
+msgid "Normal model"
+msgstr "正常模式"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "由于 Cura 版本不兼容，无法安装以下程序包："
+msgid "Print as support"
+msgstr "打印为支撑"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "确认卸载"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "修改重叠设置"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "您正在卸载仍在使用的材料和/或配置文件。确认会将以下材料/配置文件重置为默认值。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "不支持重叠"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "材料"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "仅填充网格"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "配置文件"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "切割网格"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "确认"
+msgid "Select settings"
+msgstr "选择设置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "更新固件"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "颜色方案"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "固件是直接在 3D 打印机上运行的一个软件。此固件控制步进电机，调节温度并最终使打印机正常工作。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "材料颜色"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "新打印机出厂配备的固件完全可以正常使用，但新版本往往具有更多的新功能和改进。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "走线类型"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "自动升级固件"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "速度"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "上传自定义固件"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "层厚度"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "未连接打印机，无法更新固件。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "走线宽度"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "与打印机间的连接不支持固件更新，因此无法更新固件。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "流量"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "选择自定义固件"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "兼容模式"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "固件升级"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "空驶"
+msgid "Updating firmware."
+msgstr "更新固件中..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "打印辅助结构"
+msgid "Firmware update completed."
+msgstr "固件更新已完成。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "外壳"
+msgid "Firmware update failed due to an unknown error."
+msgstr "由于未知错误，固件更新失败。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "填充"
+msgid "Firmware update failed due to an communication error."
+msgstr "由于通信错误，导致固件升级失败。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "开始"
+msgid "Firmware update failed due to an input/output error."
+msgstr "由于输入/输出错误，导致固件升级失败。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "只显示顶层"
+msgid "Firmware update failed due to missing firmware."
+msgstr "由于固件丢失，导致固件升级失败。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "在顶部显示 5 层打印细节"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "已中止"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "顶 / 底层"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "已完成"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "内壁"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "正在准备..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "最小"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "正在中止..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "最大"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "失败"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "正在暂停..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "已暂停"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "正在恢复..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "需要采取行动"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "完成 %1 于 %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "管理打印机"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "玻璃"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "请及时更新打印机固件以远程管理打印队列。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "无法从 Ultimaker Cura 中查看云打印机的网络摄像头馈送。请单击“管理打印机”以访问 Ultimaker Digital Factory 并查看此网络摄像头。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "正在加载..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "不可用"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "无法连接"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "空闲"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "正在准备..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "未命名"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "匿名"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "需要更改配置"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "详细信息"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "不可用的打印机"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "第一个可用"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "已排队"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "请于浏览器中进行管理"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "队列中无打印任务。可通过切片和发送添加任务。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "打印作业"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "总打印时间"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "等待"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "通过网络打印"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "打印"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "打印机选择"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "配置更改"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "覆盖"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "分配的打印机 %1 需要以下配置更改："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "已向打印机 %1 分配作业，但作业包含未知的材料配置。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "将材料 %1 从 %2 更改为 %3。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "将 %3 作为材料 %1 进行加载（此操作无法覆盖）。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "将 Print Core %1 从 %2 更改为 %3。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "将打印平台更改为 %1（此操作无法覆盖）。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "覆盖将使用包含现有打印机配置的指定设置。这可能会导致打印失败。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "铝"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "已完成"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "正在中止..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "已中止"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "失败"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "正在暂停..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "已暂停"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "正在恢复..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "通过网络打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "需要采取行动"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "完成 %1 于 %2"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "打印机选择"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "连接到网络打印机"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "欲通过网络向打印机发送打印请求，请确保您的打印机已通过网线或 WIFI 连接至网络。若不能连接 Cura 与打印机，亦可通过使用 USB 设备将 G-code 文件传输到打印机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "请从以下列表中选择您的打印机："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "编辑"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "删除"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "刷新"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "如果您的打印机未列出，请阅读<a href='%1'>网络打印故障排除指南</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "类型"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "固件版本"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "地址"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "这台打印机未设置为运行一组打印机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "这台打印机是一组共 %1 台打印机的主机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "该网络地址的打印机尚未响应。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "连接"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "IP 地址无效"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "请输入有效的 IP 地址。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "打印机网络地址"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "请输入打印机在网络上的 IP 地址。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "不可用的打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "第一个可用"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "移至顶部"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "删除"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "恢复"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "正在暂停..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "正在恢复..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "暂停"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "正在中止..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "中止"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "您确定要将 %1 移至队列顶部吗？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "将打印作业移至顶部"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "您确定要删除 %1 吗？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "删除打印作业"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "您确定要中止 %1 吗？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "中止打印"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "已排队"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "请于浏览器中进行管理"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "队列中无打印任务。可通过切片和发送添加任务。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "打印作业"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "总打印时间"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "等待"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "颜色方案"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "材料颜色"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "走线类型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "速度"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "层厚度"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "走线宽度"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "流量"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "兼容模式"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "空驶"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "打印辅助结构"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "外壳"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "填充"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "开始"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "只显示顶层"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "在顶部显示 5 层打印细节"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "顶 / 底层"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "内壁"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "最小"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "最大"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"请确保您的打印机已连接：\n"
-"- 检查打印机是否已启动。\n"
-"- 检查打印机是否连接至网络。\n"
-"- 检查您是否已登录查找云连接的打印机。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "请将打印机连接到网络。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "高度 (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "查看联机用户手册"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "每个像素与底板的最大距离"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "为了从 Cura 监控您的打印，请连接打印机。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "底板 (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "此次打印可能出现了某些问题。点击查看调整提示。"
+msgid "The base height from the build plate in millimeters."
+msgstr "距离打印平台的底板高度，以毫米为单位。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "宽度 (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D 视图"
+msgid "The width in millimeters on the build plate"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "深度 (mm)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "正视图"
+msgid "The depth in millimeters on the build plate"
+msgstr "打印平台深度，以毫米为单位"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "颜色越深厚度越大"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "颜色越浅厚度越大"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "顶视图"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "在影像浮雕中，为了阻挡更多光源通过，深色像素应对应于较厚的位置。在高度图中，浅色像素代表着更高的地形，因此浅色像素对应于生成的 3D 模型中较厚的位置。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "线性"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "半透明"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "左视图"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "对于隐雕，提供一个用于半透明的简单对数模型。对于高度图，像素值与高度线性对应。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1 毫米透射率 (%)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "右视图"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "穿透 1 毫米厚的打印件的光线百分比。降低此值将增大图像暗区中的对比度并减小图像亮区中的对比度。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "对象列表"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "平滑"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "要应用到图像的平滑量。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "市场"
+msgid "OK"
+msgstr "确定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "文件(&F)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "打开项目"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "编辑（&E）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "更新已有配置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "视图(&V)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "新建"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "设置(&S)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "摘要 - Cura 项目"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "扩展(&X)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "机器的设置冲突应如何解决？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "偏好设置（&R）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "打印机设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "帮助(&H)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "类型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "新建项目"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "打印机组"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "你确定要开始一个新项目吗？这将清除打印平台及任何未保存的设置。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "配置文件中的冲突如何解决？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "正在切片..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "配置文件设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "无法切片"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "名字"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "不在配置文件中"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 重写"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "衍生自"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 重写"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "材料的设置冲突应如何解决？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "材料设置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "设置可见性"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "模式"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "可见设置："
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 / %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "加载项目将清除打印平台上的所有模型。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "打开"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "正在处理中"
+msgid "Want more?"
+msgstr "想要更多？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "切片"
+msgid "Backup Now"
+msgstr "立即备份"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "开始切片流程"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "自动备份"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "取消"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "在 Cura 每天启动时自动创建备份。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "预计时间"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura 版本"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "预计材料"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "机器"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "材料"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "配置文件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "无可用时间估计"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "插件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "无可用成本估计"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "恢复"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "删除备份"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "您确定要删除此备份吗？此操作无法撤销。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "恢复备份"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "您需要重新启动 Cura 才能恢复备份。您要立即关闭 Cura 吗？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "备份并同步您的 Cura 设置。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "预览"
+msgid "Sign in"
+msgstr "登录"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "添加打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "我的备份"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "您目前没有任何备份。使用“立即备份”按钮创建一个备份。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "在预览阶段，将限制为 5 个可见备份。移除一个备份以查看更早的备份。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura 备份"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "更多关于匿名数据收集的信息"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据。以下是所有数据分享的示例："
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "我不想发送匿名数据"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "允许发送匿名数据"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "后期处理插件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "添加已联网打印机"
+msgid "Post Processing Scripts"
+msgstr "后期处理脚本"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "添加一个脚本"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "添加未联网打印机"
+msgid "Settings"
+msgstr "设置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "更改处于活动状态的后期处理脚本。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "以下脚本处于活动状态："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "添加云打印机"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "请选择适用于 Ultimaker Original 的升级文件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "等待云响应"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "热床（官方版本或自制）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "打印平台调平"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "在您的帐户中未找到任何打印机？"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "为了确保打印质量出色，您现在可以开始调整您的打印平台。当您点击「移动到下一个位置」时，喷嘴将移动到可以调节的不同位置。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "您帐户中的以下打印机已添加到 Cura 中："
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "在打印头停止的每一个位置下方插入一张纸，并调整平台高度。当纸张恰好被喷嘴的尖端轻微压住时，此时打印平台的高度已被正确校准。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "开始进行打印平台调平"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "移动到下一个位置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "手动添加打印机"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "按 IP 地址添加打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "输入您打印机的 IP 地址。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "添加"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "无法连接到设备。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "退出 %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "无法连接到 Ultimaker 打印机？"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "该网络地址的打印机尚未响应。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "由于是未知打印机或不是组内主机，无法添加该打印机。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "返回"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "连接"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "用户协议"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "拒绝并关闭"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "欢迎使用 Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
 msgstr ""
-"请按照以下步骤设置\n"
-"Ultimaker Cura。此操作只需要几分钟时间。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "开始"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "登录 Ultimaker 平台"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "从 Marketplace 添加材料设置和插件"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "备份和同步材料设置和插件"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "在 Ultimaker 社区分享观点并获取 48,000 多名用户的帮助"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "跳过"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "拒绝"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "创建免费的 Ultimaker 帐户"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "喷嘴设置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "制造商"
+msgid "Nozzle size"
+msgstr "喷嘴孔径"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "配置文件作者"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "打印机名称"
+msgid "Compatible material diameter"
+msgstr "兼容的材料直径"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "请为您的打印机命名"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "喷嘴偏移 X"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "未找到网络内打印机。"
+msgid "Nozzle offset Y"
+msgstr "喷嘴偏移 Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "刷新"
+msgid "Cooling Fan Number"
+msgstr "冷却风扇数量"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "挤出机的开始 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "挤出机的结束 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "打印机设置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "按 IP 添加打印机"
+msgid "X (Width)"
+msgstr "X (宽度)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "添加云打印机"
+msgid "Y (Depth)"
+msgstr "Y (深度)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "故障排除"
+msgid "Z (Height)"
+msgstr "Z (高度)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "帮助我们改进 Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "打印平台形状"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据，这些数据包括："
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "置中"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "机器类型"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "加热床"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "材料使用"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "加热的构建体积"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "切片数量"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-code 风格"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "打印设置"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "打印头设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura 收集的数据不会包含任何个人信息。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X 最小值"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "更多信息"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y 最小值"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "新增功能"
+msgid "X max"
+msgstr "X 最大值"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "空"
+msgid "Y max"
+msgstr "Y 最大值"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "版本说明"
+msgid "Gantry Height"
+msgstr "十字轴高度"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "挤出机数目"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "将挤出器偏移量应用于 GCode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "开始 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "结束 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "我的打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "在 Ultimaker Digital Factory 中监控打印机。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "在 Digital Library 中创建打印项目。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "打印作业"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "监控打印作业并从打印历史记录重新打印。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "用插件和材料配置文件扩展 Ultimaker Cura。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "通过 Ultimaker 线上课程教学，成为 3D 打印专家。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Ultimaker 支持"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "了解如何开始使用 Ultimaker Cura。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "提问"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "咨询 Ultimaker 社区。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "报告错误"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "向开发人员报错。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "访问 Ultimaker 网站。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "用 %1 打印所选模型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "设置(&S)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "新建项目"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "你确定要开始一个新项目吗？这将清除打印平台及任何未保存的设置。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "市场"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "打印平台"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "热床的目标温度。热床将加热或冷却至此温度。若设置为 0，则不使用热床。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "热床当前温度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "热床的预热温度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "取消"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "预热"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "打印前请预热热床。您可以在热床加热时继续调整相关项，让您在准备打印时不必等待热床加热完毕。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "尚未连接到打印机。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "打印机控制"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "垛齐位置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "垛齐距离"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "发送 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "向连接的打印机发送自定义 G-code 命令。按“Enter”发送命令。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "挤出机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "热端的目标温度。 热端将加热或冷却至此温度。 如果目标温度为 0，则热端加热将关闭。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "该热端的当前温度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "热端的预热温度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "打印前请预热热端。您可以在热端加热时继续调整打印机，而不必等待热端加热完毕再做好打印准备。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "该挤出机中材料的颜色。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "该挤出机中的材料。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "该挤出机所使用的喷嘴。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "打开项目文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "这是一个 Cura 项目文件。您想将其作为一个项目打开还是从中导入模型？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "记住我的选择"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "作为项目打开"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "导入模型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "保存项目"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "挤出机 %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & 材料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "材料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "保存时不再显示项目摘要"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "保存"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "打开文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "我们已经在您所选择的文件中找到一个或多个项目文件，但一次只能打开一个项目文件。我们建议只从那些文件中导入模型而不打开项目。您要继续操作吗?"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "导入所有模型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "关于 %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "版本： %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "熔丝 3D 打印技术的的端对端解决方案。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3753,2221 +3585,2380 @@ msgstr ""
 "Cura 由 Ultimaker B.V. 与社区合作开发。\n"
 "Cura 使用以下开源项目："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "图形用户界面"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "应用框架"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code 生成器"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "进程间通信交互使用库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "编程语言"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI 框架"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI 框架绑定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C / C++ 绑定库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "数据交换格式"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "科学计算支持库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "高速运算支持库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "用于处理 STL 文件的支持库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "用于处理平面对象的支持库"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "用于处理三角网格的支持库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "用于处理 3MF 文件的支持库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "用于文件元数据和流媒体的支持库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "串口通讯库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf 发现库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "多边形剪辑库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "适用于 Python 的静态类型检查器"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "用于验证 SSL 可信度的根证书"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python 错误跟踪库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Prusa Research 开发的多边形打包库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "libnest2d 的 Python 绑定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "支持系统密钥环访问库"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "适用于 Microsoft Windows 的 Python 扩展"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "字体"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG 图标"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux 交叉分布应用程序部署"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "打开文件"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "我们已经在您所选择的文件中找到一个或多个项目文件，但一次只能打开一个项目文件。我们建议只从那些文件中导入模型而不打开项目。您要继续操作吗?"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "导入所有模型"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "保存项目"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "挤出机 %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & 材料"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "材料"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "保存时不再显示项目摘要"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "保存"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "舍弃或保留更改"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"您已经自定义了若干配置文件设置。\n"
-"是否要在切换配置文件后保留这些更改的设置？\n"
-"或者，也可舍弃更改以从“%1”加载默认值。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "配置文件设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "当前更改"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "总是询问"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "舍弃更改，并不再询问此问题"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "保留更改，并不再询问此问题"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "舍弃更改"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "保留更改"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "打开项目文件"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "没有可供选择的项目"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "这是一个 Cura 项目文件。您想将其作为一个项目打开还是从中导入模型？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "打开文件..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "记住我的选择"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "打开最近使用过的文件(&R)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "作为项目打开"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "可见设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "导入模型"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "折叠所有类别"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "管理设置可见性..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "材料（&M）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "设为主要挤出机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "启用挤出机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "禁用挤出机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "材料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "收藏"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "通用"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "帮助(&H)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "文件(&F)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "保存项目(＆S)..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "导出(&E)..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "导出选择..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "偏好设置（&R）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "编辑（&E）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "打印机（&P）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "网络打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "本地打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "扩展(&X)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "配置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "正在打印"
+msgid "Loading available configurations from the printer..."
+msgstr "正在从打印机加载可用配置..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "作业名"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "该配置不可用，因为打印机已断开连接。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "打印时间"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "此配置不可用，因为 %1 未被识别。请访问 %2 以下载正确的材料配置文件。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "预计剩余时间"
+msgid "Marketplace"
+msgstr "市场"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "云打印机离线。请检查打印机是否已开启并连接到 Internet。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "不允许此挤出器的配置并禁止切片。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "此打印机未链接到您的帐户。请访问 Ultimaker Digital Factory 以建立连接。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "没有与此挤出器的配置匹配的配置文件。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "云连接当前不可用。请登录以连接到云打印机。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "选择配置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "云连接当前不可用。请检查您的 Internet 连接。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "配置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "添加打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "自定义"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "管理打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "已连接的打印机"
+msgid "Enabled"
+msgstr "已启用"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "预设打印机"
+msgid "Material"
+msgstr "材料"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "打印设置"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "用胶粘和此材料组合以产生更好的附着。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "打印设置已禁用。无法修改 G code 文件。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "打印所选模型："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "复制所选模型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "配置文件"
+msgid "Number of Copies"
+msgstr "复制个数"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "保存项目..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "视图(&V)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "摄像头位置(&C)"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "摄像头视图"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "透视"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "正交"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "查看类型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "登录 Ultimaker 平台"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"某些设置/重写值与存储在配置文件中的值不同。\n"
-"\n"
-"点击打开配置文件管理器。"
+"- 从 Marketplace 添加材料配置文件和插件\n"
+"- 备份和同步材料配置文件和插件\n"
+"- 在 Ultimaker 社区分享观点并获取 48,000 多名用户的帮助"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "自定义配置文件"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "创建免费的 Ultimaker 帐户"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "舍弃当前更改"
+msgid "Sign in"
+msgstr "登录"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "上次更新时间：%1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "推荐"
+msgid "Ultimaker Account"
+msgstr "Ultimaker 帐户"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "自定义"
+msgid "Sign Out"
+msgstr "注销"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "正在检查..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "帐户已同步"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "发生了错误..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "安装挂起的更新"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "检查是否存在帐户更新"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "正在切片..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "无法切片"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "正在处理中"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "切片"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "开始切片流程"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "取消"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "预计时间"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "预计材料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "无可用时间估计"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "无可用成本估计"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "预览"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "这个包将在重新启动后安装。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "基本"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "设置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "材料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "配置文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "正在关闭 %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "您确定要退出 %1 吗？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "安装包"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "打开文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "我们已经在您选择的文件中找到一个或多个 G-Code 文件。您一次只能打开一个 G-Code 文件。若需打开 G-Code 文件，请仅选择一个。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "新增打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "新增功能"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "开"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "关"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "实验性"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "打印设置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "打印设置已禁用。无法修改 G code 文件。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "推荐"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "自定义"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "没有 %1 配置文件可用于挤出器 %2 中的配置。将改为使用默认意图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "配置文件"
+msgid "Gradual infill"
+msgstr "渐层填充"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "您已修改部分配置文件设置。 如果您想对其进行更改，请转至自定义模式。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "渐层填充（Gradual infill）将随着打印高度的提升而逐渐加大填充密度。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "支持"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "在模型的悬垂（Overhangs）部分生成支撑结构。若不这样做，这些部分在打印时将倒塌。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "渐层填充"
+msgid "Profiles"
+msgstr "配置文件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "渐层填充（Gradual infill）将随着打印高度的提升而逐渐加大填充密度。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "您已修改部分配置文件设置。 如果您想对其进行更改，请转至自定义模式。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "附着"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "允许打印 Brim 或 Raft。这将在您的对象周围或下方添加一个容易切断的平面区域。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "保存项目..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "自定义配置文件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "网络打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "舍弃当前更改"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "本地打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "配置文件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "材料"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"某些设置/重写值与存储在配置文件中的值不同。\n"
+"\n"
+"点击打开配置文件管理器。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "收藏"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "通用"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "配置文件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "打印所选模型："
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "当前"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "复制所选模型"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "复制个数"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "保存项目(＆S)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "导出(&E)..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "导出选择..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "设置可见性"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "配置"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "自定义"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "全部勾选"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "激活"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "重命名"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "确认直径更改"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "新的灯丝直径被设置为%1毫米，这与当前的挤出机不兼容。你想继续吗？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "打印机"
+msgid "Display Name"
+msgstr "显示名称"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "已启用"
+msgid "Brand"
+msgstr "品牌"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "材料"
+msgid "Material Type"
+msgstr "材料类型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "用胶粘和此材料组合以产生更好的附着。"
+msgid "Color"
+msgstr "颜色"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "不允许此挤出器的配置并禁止切片。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "没有与此挤出器的配置匹配的配置文件。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "属性"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "选择配置"
+msgid "Density"
+msgstr "密度"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "配置"
+msgid "Diameter"
+msgstr "直径"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "正在从打印机加载可用配置..."
+msgid "Filament Cost"
+msgstr "耗材成本"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "该配置不可用，因为打印机已断开连接。"
+msgid "Filament weight"
+msgstr "耗材重量"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "此配置不可用，因为 %1 未被识别。请访问 %2 以下载正确的材料配置文件。"
+msgid "Filament length"
+msgstr "耗材长度"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "市场"
+msgid "Cost per Meter"
+msgstr "每米成本"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "打开文件..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "此材料与 %1 相关联，并共享其某些属性。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "打印机（&P）"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "解绑材料"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "材料（&M）"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "描述"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "设为主要挤出机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "粘附信息"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "启用挤出机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "信息"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "禁用挤出机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "匹配材料和打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "打开最近使用过的文件(&R)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "匹配材料和打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "可见设置"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "只需遵循几个简单步骤，您就可以将所有材料配置文件与打印机同步。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "折叠所有类别"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "为什么需要同步材料配置文件？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "管理设置可见性..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "开始"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "摄像头位置(&C)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "登录"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "摄像头视图"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "要自动将材料配置文件与连接到 Digital Factory 的所有打印机同步，您需要登录 Cura。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "透视"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "使用 USB 同步材料"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "正交"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "以下打印机将收到新的材料配置文件："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "打印平台(&B)"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "向打印机发送材料时出错。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "查看类型"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "材料配置文件与以下打印机成功同步："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "打印为支撑。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "故障排除"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "修改了与此模型重叠的其他模型。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "缺少打印机？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "修改了与该模型重叠的填充。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "请确保所有打印机都已打开并连接到 Digital Factory。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "不支持与此模型重叠。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "刷新列表"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "覆盖 %1 设置。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "再试一次"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "配置文件"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "完成"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "激活"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "同步"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "创建"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "正在同步"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "未找到打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "您似乎没有任何兼容打印机连接到 Digital Factory。请确保打印机已连接并运行最新固件。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "了解如何将打印机连接到 Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "刷新"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "通过 USB 同步材料配置文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "请遵循以下步骤将新材料配置文件加载到打印机。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "单击导出材料存档按钮。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "将 .umm文件保存到 U 盘。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "将 U 盘插入打印机，并启动程序以加载新材料配置文件。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "如何将新材料配置文件加载到打印机"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "返回"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "导出材料存档"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "导出所有材料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "复制"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "重命名"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "导入"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "导出"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "创建配置文件"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "请为此配置文件提供名称。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "复制"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "复制配置文件"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "导出"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "确认删除"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "您确认要删除 %1？该操作无法恢复！"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "重命名配置文件"
+msgid "Import Material"
+msgstr "导入配置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "导入配置文件"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "成功导入材料 <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "无法导入材料 <filename>%1</filename>： <message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "导出配置文件"
+msgid "Export Material"
+msgstr "导出材料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "无法导出材料至 <filename>%1</filename>： <message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "成功导出材料至： <filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "打印机：%1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "使用当前设置 / 重写值更新配置文件"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "此配置文件使用打印机指定的默认值，因此在下面的列表中没有此设置项。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "您当前的设置与选定的配置文件相匹配。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "全局设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "基本"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "创建配置文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "请为此配置文件提供名称。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "导出配置文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "复制配置文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "重命名配置文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "导入配置文件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "接口"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "币种："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "主题："
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "需重新启动 Cura，新的设置才能生效。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "当设置被更改时自动进行切片。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "自动切片"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "视区行为"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "以红色突出显示模型需要增加支撑结构的区域。没有支撑，这些区域将无法正确打印。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "显示悬垂（Overhang）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "使用警告标志突出显示模型缺少或多余的表面。刀具路径常常是要打印的几何结构缺少的部分。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "显示模型错误"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "当模型被选中时，视角将自动调整到最合适的观察位置（模型处于正中央）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "当项目被选中时，自动对中视角"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "需要令 Cura 的默认缩放操作反转吗？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "反转视角变焦方向。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "是否跟随鼠标方向进行缩放？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "正交透视不支持通过鼠标进行缩放。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "跟随鼠标方向缩放"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "需要移动平台上的模型，使它们不再相交吗？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "确保每个模型都保持分离"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "需要转动模型，使它们接触打印平台吗？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "自动下降模型到打印平台"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "在 G-code 读取器中显示警告信息。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "G-code 读取器中的警告信息"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "层视图要强制进入兼容模式吗？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "强制层视图兼容模式（需要重新启动）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Cura 是否应该在关闭的位置打开？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "恢复初始窗口位置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "应使用哪种类型的摄像头进行渲染？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "摄像头渲染："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "透视"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "正交"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "打开并保存文件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "应从桌面打开文件还是在同一 Cura 实例中打开外部应用程序？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "使用单个 Cura 实例"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "是否应在清理构建板后再将新模型加载到单个 Cura 实例中？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "在清理构建板后再将模型加载到单个实例中"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "当模型的尺寸过大时，是否将模型自动缩小至成形空间体积？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "缩小过大模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "当模型以米而不是毫米为单位时，模型可能会在打印平台中显得非常小。在此情况下是否进行放大？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "放大过小模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "模型是否应该在加载后被选中？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "选择模型时加载"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "打印机名是否自动作为打印作业名称的前缀？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "将机器前缀添加到作业名称中"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "保存项目文件时是否显示摘要？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "保存项目时显示摘要对话框"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "打开项目文件时的默认行为"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "打开项目文件时的默认行为： "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "总是询问"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "始终作为一个项目打开"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "始终导入模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "当您对配置文件进行更改并切换到其他配置文件时将显示一个对话框，询问您是否要保留修改。您也可以选择一个默认行为并令其不再显示该对话框。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "切换到不同配置文件时对设置值更改的默认操作： "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "总是舍失更改的设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "总是将更改的设置传输至新配置文件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "隐私"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "您愿意将关于您的打印数据以匿名形式发送到 Ultimaker 吗？注意：我们不会记录/发送任何模型、IP 地址或其他私人数据。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "（匿名）发送打印信息"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "详细信息"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "更新"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "当 Cura 启动时，是否自动检查更新？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "启动时检查更新"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "在检查更新时，只检查稳定版。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "仅限稳定版"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "在检查更新时，同时检查稳定版和测试版。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "稳定版和测试版"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "是否应在每次启动 Cura 时自动检查新插件？强烈建议您不要禁用此功能！"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "获取插件更新通知"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "信息"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "按 IP 地址添加打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "确认直径更改"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "输入您打印机的 IP 地址。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "新的灯丝直径被设置为%1毫米，这与当前的挤出机不兼容。你想继续吗？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "添加"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "显示名称"
+msgid "Could not connect to device."
+msgstr "无法连接到设备。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "材料类型"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "无法连接到 Ultimaker 打印机？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "颜色"
+msgid "The printer at this address has not responded yet."
+msgstr "该网络地址的打印机尚未响应。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "属性"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "由于是未知打印机或不是组内主机，无法添加该打印机。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "密度"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "连接"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "直径"
+msgid "Release Notes"
+msgstr "版本说明"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "耗材成本"
+msgid "User Agreement"
+msgstr "用户协议"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "耗材重量"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "同意"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "耗材长度"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "拒绝并关闭"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "每米成本"
+msgid "What's New"
+msgstr "新增功能"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "下一步"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "此材料与 %1 相关联，并共享其某些属性。"
+msgid "Add a Cloud printer"
+msgstr "添加云打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "解绑材料"
+msgid "Waiting for Cloud response"
+msgstr "等待云响应"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "描述"
+msgid "No printers found in your account?"
+msgstr "在您的帐户中未找到任何打印机？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "粘附信息"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "您帐户中的以下打印机已添加到 Cura 中："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "创建"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "手动添加打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "复制"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "从 Marketplace 添加材料设置和插件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "与打印机同步"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "备份和同步材料设置和插件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "在 Ultimaker 社区分享观点并获取 48,000 多名用户的帮助"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "导入配置"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "跳过"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "无法导入材料 <filename>%1</filename>： <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "创建免费的 Ultimaker 帐户"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "成功导入材料 <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "欢迎使用 Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "导出材料"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"请按照以下步骤设置\n"
+"Ultimaker Cura。此操作只需要几分钟时间。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "无法导出材料至 <filename>%1</filename>： <message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "开始"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "成功导出材料至： <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "空"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "匹配材料和打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "制造商"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "匹配材料和打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "配置文件作者"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "只需遵循几个简单步骤，您就可以将所有材料配置文件与打印机同步。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "打印机名称"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "开始"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "请为您的打印机命名"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "为什么需要同步材料配置文件？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "添加打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "登录"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "添加已联网打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "要自动将材料配置文件与连接到 Digital Factory 的所有打印机同步，您需要登录 Cura。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "添加未联网打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "使用 USB 同步材料"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "未找到网络内打印机。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "以下打印机将收到新的材料配置文件："
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "刷新"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "向打印机发送材料时出错。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "按 IP 添加打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "材料配置文件与以下打印机成功同步："
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "添加云打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "故障排除"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "缺少打印机？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "帮助我们改进 Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "请确保所有打印机都已打开并连接到 Digital Factory。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "刷新列表"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "再试一次"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "完成"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据，这些数据包括："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "同步"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "机器类型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "正在同步"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "材料使用"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "未找到打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "切片数量"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "您似乎没有任何兼容打印机连接到 Digital Factory。请确保打印机已连接并运行最新固件。"
+msgid "Print settings"
+msgstr "打印设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "了解如何将打印机连接到 Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura 收集的数据不会包含任何个人信息。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "刷新"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "更多信息"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "通过 USB 同步材料配置文件"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "对象列表"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "请遵循以下步骤将新材料配置文件加载到打印机。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "打印为支撑。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "单击导出材料存档按钮。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "修改了与此模型重叠的其他模型。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "将 .umm文件保存到 U 盘。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "修改了与该模型重叠的填充。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "将 U 盘插入打印机，并启动程序以加载新材料配置文件。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "不支持与此模型重叠。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "如何将新材料配置文件加载到打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "覆盖 %1 设置。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "导出材料存档"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "已连接的打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "导出所有材料"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "预设打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "设置可见性"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "云打印机离线。请检查打印机是否已开启并连接到 Internet。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "全部勾选"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "此打印机未链接到您的帐户。请访问 Ultimaker Digital Factory 以建立连接。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "云连接当前不可用。请登录以连接到云打印机。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "已计算"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "云连接当前不可用。请检查您的 Internet 连接。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "设置"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "添加打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "配置文件"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "管理打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "当前"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "单位"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "未命名"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "未连接至打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "打印机不接受命令"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "维护中。请检查打印机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "与打印机的连接中断"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "打印中..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "已暂停"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "初始化中..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "请取出打印件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "中止打印"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "您确定要中止打印吗？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "用 %1 打印所选模型"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "我的打印机"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "在 Ultimaker Digital Factory 中监控打印机。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "在 Digital Library 中创建打印项目。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "打印作业"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "监控打印作业并从打印历史记录重新打印。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "用插件和材料配置文件扩展 Ultimaker Cura。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "通过 Ultimaker 线上课程教学，成为 3D 打印专家。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Ultimaker 支持"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"一些隐藏设置正在使用有别于一般设置的计算值。\n"
+"\n"
+"单击以使这些设置可见。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "了解如何开始使用 Ultimaker Cura。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "搜索设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "提问"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "将值复制到所有挤出机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "咨询 Ultimaker 社区。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "将所有修改值复制到所有挤出机"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "报告错误"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "隐藏此设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "向开发人员报错。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "不再显示此设置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "访问 Ultimaker 网站。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "保持此设置可见"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "打印机控制"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "配置设定可见性..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "垛齐位置"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "未使用此设置，因为受其影响的所有设置均已覆盖。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "影响"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "受影响项目"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "垛齐距离"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "此设置始终在所有挤出机之间共享。在此处更改它将改变所有挤出机的值。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "发送 G-code"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "向连接的打印机发送自定义 G-code 命令。按“Enter”发送命令。"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "此设置与挤出器特定值不同："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "挤出机"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "热端的目标温度。 热端将加热或冷却至此温度。 如果目标温度为 0，则热端加热将关闭。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "该热端的当前温度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "热端的预热温度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "取消"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "预热"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "打印前请预热热端。您可以在热端加热时继续调整打印机，而不必等待热端加热完毕再做好打印准备。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "该挤出机中材料的颜色。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "该挤出机中的材料。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "该挤出机所使用的喷嘴。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "尚未连接到打印机。"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"此设置的值与配置文件不同。\n"
+"\n"
+"单击以恢复配置文件的值。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "打印平台"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "热床的目标温度。热床将加热或冷却至此温度。若设置为 0，则不使用热床。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "热床当前温度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "热床的预热温度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "打印前请预热热床。您可以在热床加热时继续调整相关项，让您在准备打印时不必等待热床加热完毕。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "登录"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- 从 Marketplace 添加材料配置文件和插件\n"
-"- 备份和同步材料配置文件和插件\n"
-"- 在 Ultimaker 社区分享观点并获取 48,000 多名用户的帮助"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "创建免费的 Ultimaker 帐户"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "上次更新时间：%1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker 帐户"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "注销"
+"此设置通常可被自动计算，但其当前已被绝对定义。\n"
+"\n"
+"单击以恢复自动计算的值。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "正在检查..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "帐户已同步"
+msgid "Active print"
+msgstr "正在打印"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "发生了错误..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "安装挂起的更新"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "检查是否存在帐户更新"
+msgid "Job Name"
+msgstr "作业名"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "未命名"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "打印时间"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "没有可供选择的项目"
+msgid "Estimated time left"
+msgstr "预计剩余时间"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "显示联机故障排除指南"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "切换完整界面"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "退出完整界面"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "撤销(&U)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "重做(&R)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "退出(&Q)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "3D 视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "正视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "顶视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "仰视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "左视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "右视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "配置 Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "新增打印机(&A)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "管理打印机(&I)..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "管理材料..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "从市场添加更多材料"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "使用当前设置 / 重写值更新配置文件（&U）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "舍弃当前更改（&D）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "从当前设置 / 重写值创建配置文件（&C）..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "管理配置文件.."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "显示在线文档(&D)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "BUG 反馈(&B)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "新增功能"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "关于..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "删除所选项"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "居中所选项"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "复制所选项"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "删除模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "使模型居于平台中央（&N）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "绑定模型（&G）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "拆分模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "合并模型（&M）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "复制模型…（&M）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "选择所有模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "清空打印平台"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "重新载入所有模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "将所有模型编位到所有打印平台"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "编位所有的模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "为所选模型编位"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "复位所有模型的位置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "复位所有模型的变动"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "打开文件（&O）..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "新建项目（&N）..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "显示配置文件夹"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "配置设定可见性..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "市场(&M)"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "未使用此设置，因为受其影响的所有设置均已覆盖。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "影响"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "受影响项目"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "此设置始终在所有挤出机之间共享。在此处更改它将改变所有挤出机的值。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "此设置与挤出器特定值不同："
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"此设置的值与配置文件不同。\n"
-"\n"
-"单击以恢复配置文件的值。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"此设置通常可被自动计算，但其当前已被绝对定义。\n"
-"\n"
-"单击以恢复自动计算的值。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "搜索设置"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "将值复制到所有挤出机"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "将所有修改值复制到所有挤出机"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "隐藏此设置"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "不再显示此设置"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "保持此设置可见"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"一些隐藏设置正在使用有别于一般设置的计算值。\n"
-"\n"
-"单击以使这些设置可见。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "这个包将在重新启动后安装。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "设置"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "正在关闭 %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "您确定要退出 %1 吗？"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "安装包"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D 视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "打开文件"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "正视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "我们已经在您选择的文件中找到一个或多个 G-Code 文件。您一次只能打开一个 G-Code 文件。若需打开 G-Code 文件，请仅选择一个。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "顶视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "新增打印机"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "左视图"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "新增功能"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "右视图"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "提供对每个模型的单独设置。"
+msgid "Provides a prepare stage in Cura."
+msgstr "在 Cura 中提供准备阶段。"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "单一模型设置工具"
+msgid "Prepare Stage"
+msgstr "准备阶段"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "提供了对导入 Cura 配置文件的支持。"
+msgid "Provides support for exporting Cura profiles."
+msgstr "提供了对导出 Cura 配置文件的支持。"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura 配置文件读取器"
+msgid "Cura Profile Writer"
+msgstr "Cura 配置文件写入器"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "支持读取 X3D 文件。"
+msgid "Provides support for reading model files."
+msgstr "提供对读取模型文件的支持。"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D 读取器"
+msgid "Trimesh Reader"
+msgstr "Trimesh 阅读器"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "备份和还原配置。"
+msgid "Checks for firmware updates."
+msgstr "检查以进行固件更新。"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura 备份"
+msgid "Firmware Update Checker"
+msgstr "固件更新检查程序"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "提供一种改变机器设置的方法（如构建体积、喷嘴大小等）。"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "记录某些事件，以使其可供崩溃报告器使用"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "打印机设置操作"
+msgid "Sentry Logger"
+msgstr "Sentry 日志记录"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "创建橡皮擦网格，以便阻止在某些位置打印支撑"
+msgid "Provides a monitor stage in Cura."
+msgstr "在 Cura 中提供监视阶段。"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "支持橡皮擦"
+msgid "Monitor Stage"
+msgstr "监视阶段"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5979,105 +5970,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "可移动磁盘输出设备插件"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "为固件更新提供操作选项。"
+msgid "Provides support for reading AMF files."
+msgstr "提供对读取 AMF 文件的支持。"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "固件更新程序"
+msgid "AMF Reader"
+msgstr "AMF 读取器"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "支持从 Cura 旧版本导入配置文件。"
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "支持读取 Ultimaker 格式包。"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "旧版 Cura 配置文件读取器"
+msgid "UFP Reader"
+msgstr "UFP 读取器"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "提供对读取 3MF 格式文件的支持。"
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "连接到 Digital Library，以允许 Cura 从 Digital Library 打开文件并将文件保存到其中。"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF 读取器"
+msgid "Ultimaker Digital Library"
+msgstr "Ultimaker Digital Library"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "支持写入 Ultimaker 格式包。"
+msgid "Provides the Per Model Settings."
+msgstr "提供对每个模型的单独设置。"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP 写入器"
+msgid "Per Model Settings Tool"
+msgstr "单一模型设置工具"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "记录某些事件，以使其可供崩溃报告器使用"
+msgid "Provides a machine actions for updating firmware."
+msgstr "为固件更新提供操作选项。"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentry 日志记录"
+msgid "Firmware Updater"
+msgstr "固件更新程序"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "提供了从 GCode 文件中导入配置文件的支持。"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "管理与 Ultimaker 网络打印机的网络连接。"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code 配置文件读取器"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker 网络连接"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "在 Cura 中提供预览阶段。"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "检查模型和打印配置，以了解潜在的打印问题并给出建议。"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "预览阶段"
+msgid "Model Checker"
+msgstr "模型检查器"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "提供透视视图。"
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "透视视图"
+msgid "Simulation View"
+msgstr "仿真视图"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "提供 CuraEngine 切片后端的路径。"
+msgid "Writes g-code to a file."
+msgstr "将 G-code 写入至文件。"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine 后端"
+msgid "G-code Writer"
+msgstr "G-code 写入器"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "提供对读取 AMF 文件的支持。"
+msgid "Provides support for writing 3MF files."
+msgstr "提供对写入 3MF 文件的支持。"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF 读取器"
+msgid "3MF Writer"
+msgstr "3MF 写入器"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -6089,175 +6080,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "压缩 G-code 读取器"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "扩展程序（允许用户创建脚本进行后期处理）"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "提供读取和写入基于 XML 的材料配置文件的功能。"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "后期处理"
+msgid "Material Profiles"
+msgstr "材料配置文件"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "提供了对导出 Cura 配置文件的支持。"
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "提供 CuraEngine 切片后端的路径。"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura 配置文件写入器"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine 后端"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "接受 G-Code 并将其发送到一台打印机。 插件也可以更新固件。"
+msgid "Provides support for reading X3D files."
+msgstr "支持读取 X3D 文件。"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB 联机打印"
+msgid "X3D Reader"
+msgstr "X3D 读取器"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "在 Cura 中提供准备阶段。"
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "支持从 2D 图像文件生成可打印几何模型的能力。"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "准备阶段"
+msgid "Image Reader"
+msgstr "图像读取器"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "允许加载和显示 G-code 文件。"
+msgid "Provides support for reading 3MF files."
+msgstr "提供对读取 3MF 格式文件的支持。"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code 读取器"
+msgid "3MF Reader"
+msgstr "3MF 读取器"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "支持从 2D 图像文件生成可打印几何模型的能力。"
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "支持写入 Ultimaker 格式包。"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "图像读取器"
+msgid "UFP Writer"
+msgstr "UFP 写入器"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "为最后的机器提供机器操作（例如，热床调平向导，选择升级等）。"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "支持从 Cura 旧版本导入配置文件。"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker 打印机操作"
+msgid "Legacy Cura Profile Reader"
+msgstr "旧版 Cura 配置文件读取器"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "将 G-code 写入至压缩存档文件。"
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "将配置从 Cura 4.3 升级至 Cura 4.4。"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "压缩 G-code 写入器"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "版本自 4.3 升级至 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "检查以进行固件更新。"
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "将配置从 Cura 2.1 版本升级至 2.2 版本。"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "固件更新检查程序"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "版本自 2.1 升级到 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "提交匿名切片信息。 可以通过偏好设置禁用。"
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "请将配置从 Cura 4.1 升级至 Cura 4.2。"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "切片信息"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "版本自 4.1 升级到 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "提供读取和写入基于 XML 的材料配置文件的功能。"
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "材料配置文件"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "连接到 Digital Library，以允许 Cura 从 Digital Library 打开文件并将文件保存到其中。"
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "将配置从 Cura 4.5 升级至 Cura 4.6。"
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Ultimaker Digital Library"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "版本从 4.5 升级至 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "查找、管理和安装新的Cura包。"
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "从Cura 3.3升级到Cura 3.4。"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "工具箱"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "版本升级3.3到3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "将 G-code 写入至文件。"
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "将配置从 Cura 4.8 升级到 Cura 4.9。"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code 写入器"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "版本从 4.8 升级到 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "提供仿真视图。"
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "将配置从 Cura 2.7 版本升级至 3.0 版本。"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "仿真视图"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "版本自 2.7 升级到 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "将配置从 Cura 4.5 升级至 Cura 4.6。"
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "将配置从 Cura 4.4 升级至 Cura 4.5。"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "版本从 4.5 升级至 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "版本从 4.4 升级至 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "将配置从 Cura 2.5 版本升级至 2.6 版本。"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "将配置从 Cura 3.0 版本升级至 3.1 版本。"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "版本自 2.5 升级到 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "版本自 3.0 升级到 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6269,115 +6260,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "版本从 4.6.0 升级到 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "将配置从 Cura 4.7 升级到 Cura 4.8。"
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "将配置从 Cura 2.6 版本升级至 2.7 版本。"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "将版本从 4.7 升级到 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "版本自 2.6 升级到 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "将配置从 Cura 3.4 版本升级至 3.5 版本。"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "请将配置从 Cura 4.2 升级至 Cura 4.3。"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "版本自 3.4 升级到 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "版本自 4.2 升级至 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "将配置从 Cura 2.1 版本升级至 2.2 版本。"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "将配置从 Cura 4.0 版本升级至 4.1 版本。"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "版本自 2.1 升级到 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "版本自 4.0 升级到 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "将配置从 Cura 3.2 版本升级至 3.3 版本。"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "将配置从 Cura 4.6.2 升级到 Cura 4.7。"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "版本自 3.2 升级到 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "版本从 4.6.2 升级到 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "将配置从 Cura 4.8 升级到 Cura 4.9。"
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "将配置从 Cura 4.9 升级到 Cura 4.10。"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "版本从 4.8 升级到 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "版本从 4.9 升级到 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "将配置从 Cura 4.6.2 升级到 Cura 4.7。"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "将配置从 Cura 2.2 版本升级至 2.4 版本。"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "版本从 4.6.2 升级到 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "版本自 2.2 升级到 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "请将配置从 Cura 4.2 升级至 Cura 4.3。"
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "将配置从 Cura 3.2 版本升级至 3.3 版本。"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "版本自 4.2 升级至 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "版本自 3.2 升级到 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "将配置从 Cura 4.3 升级至 Cura 4.4。"
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "将配置从 Cura 2.5 版本升级至 2.6 版本。"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "版本自 4.3 升级至 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "版本自 2.5 升级到 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "将配置从 Cura 4.9 升级到 Cura 4.10。"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "将配置从 Cura 3.5 版本升级至 4.0 版本。"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "版本从 4.9 升级到 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "版本自 3.5 升级到 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "将配置从 Cura 2.7 版本升级至 3.0 版本。"
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "将配置从 Cura 3.4 版本升级至 3.5 版本。"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "版本自 2.7 升级到 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "版本自 3.4 升级到 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "将配置从 Cura 2.6 版本升级至 2.7 版本。"
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "将配置从 Cura 4.7 升级到 Cura 4.8。"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "版本自 2.6 升级到 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "将版本从 4.7 升级到 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6389,105 +6380,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "版本从 4.11 升级到 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "从Cura 3.3升级到Cura 3.4。"
+msgid "Backup and restore your configuration."
+msgstr "备份和还原配置。"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "版本升级3.3到3.4"
+msgid "Cura Backups"
+msgstr "Cura 备份"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "将配置从 Cura 3.0 版本升级至 3.1 版本。"
+msgid "Provides support for importing Cura profiles."
+msgstr "提供了对导入 Cura 配置文件的支持。"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "版本自 3.0 升级到 3.1"
+msgid "Cura Profile Reader"
+msgstr "Cura 配置文件读取器"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "将配置从 Cura 4.0 版本升级至 4.1 版本。"
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "提交匿名切片信息。 可以通过偏好设置禁用。"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "版本自 4.0 升级到 4.1"
+msgid "Slice info"
+msgstr "切片信息"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "将配置从 Cura 4.4 升级至 Cura 4.5。"
+msgid "Provides support for importing profiles from g-code files."
+msgstr "提供了从 GCode 文件中导入配置文件的支持。"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "版本从 4.4 升级至 4.5"
+msgid "G-code Profile Reader"
+msgstr "G-code 配置文件读取器"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "将配置从 Cura 2.2 版本升级至 2.4 版本。"
+msgid "Writes g-code to a compressed archive."
+msgstr "将 G-code 写入至压缩存档文件。"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "版本自 2.2 升级到 2.4"
+msgid "Compressed G-code Writer"
+msgstr "压缩 G-code 写入器"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "请将配置从 Cura 4.1 升级至 Cura 4.2。"
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "扩展程序（允许用户创建脚本进行后期处理）"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "版本自 4.1 升级到 4.2"
+msgid "Post Processing"
+msgstr "后期处理"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "将配置从 Cura 3.5 版本升级至 4.0 版本。"
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "创建橡皮擦网格，以便阻止在某些位置打印支撑"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "版本自 3.5 升级到 4.0"
+msgid "Support Eraser"
+msgstr "支持橡皮擦"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "管理与 Ultimaker 网络打印机的网络连接。"
+msgid "Provides a preview stage in Cura."
+msgstr "在 Cura 中提供预览阶段。"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker 网络连接"
+msgid "Preview Stage"
+msgstr "预览阶段"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "提供对读取模型文件的支持。"
+msgid "Provides the X-Ray view."
+msgstr "提供透视视图。"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh 阅读器"
+msgid "X-Ray View"
+msgstr "透视视图"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "支持读取 Ultimaker 格式包。"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "为最后的机器提供机器操作（例如，热床调平向导，选择升级等）。"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP 读取器"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker 打印机操作"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6499,35 +6500,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "实体视图"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "提供对写入 3MF 文件的支持。"
+msgid "Allows loading and displaying G-code files."
+msgstr "允许加载和显示 G-code 文件。"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF 写入器"
+msgid "G-code Reader"
+msgstr "G-code 读取器"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "在 Cura 中提供监视阶段。"
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "提供一种改变机器设置的方法（如构建体积、喷嘴大小等）。"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "监视阶段"
+msgid "Machine Settings Action"
+msgstr "打印机设置操作"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "检查模型和打印配置，以了解潜在的打印问题并给出建议。"
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "接受 G-Code 并将其发送到一台打印机。 插件也可以更新固件。"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "模型检查器"
+msgid "USB printing"
+msgstr "USB 联机打印"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "同步材料与打印机"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "需要退出并重新启动 {}，然后更改才能生效。"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "正在同步..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "检测到您的 Ultimaker 帐户有更改"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "是否要与您的帐户同步材料和软件包?"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "同步"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "拒绝并从帐户中删除"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "{} 个插件下载失败"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "插件许可协议"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "转换图像..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "打印平台宽度，以毫米为单位。"
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "市场"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "在包装更改生效之前，您需要重新启动Cura。"
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "安装"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "已安装"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "高级"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "前往网上市场"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "搜索材料"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "兼容性"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "机器"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "打印平台"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "支持"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "质量"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "技术数据表"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "安全数据表"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "打印指南"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "网站"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "安装或更新需要<a href='%1'>登录</a>"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>购买材料线轴</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "更新"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "更新"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "更新"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "背部"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "插件"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "安装"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "将安装后重新启动"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "更新需要<a href='%1'>登录</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "降级"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "卸载"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "社区贡献"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "社区插件"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "通用材料"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "获取包..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "网站"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "电子邮件"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "请登录以获取经验证适用于 Ultimaker Cura Enterprise 的插件和材料"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "版本"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "更新日期"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "下载项"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "已安装的插件"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "尚未安装任何插件。"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "已安装的材料"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "尚未安装任何材料。"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "已捆绑的插件"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "已捆绑的材料"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "无法连接到Cura包数据库。请检查您的连接。"
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "需要接受许可证才能安装该程序包"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "您的帐户有更改"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "解除"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "将添加以下程序包："
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "由于 Cura 版本不兼容，无法安装以下程序包："
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "确认卸载"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "您正在卸载仍在使用的材料和/或配置文件。确认会将以下材料/配置文件重置为默认值。"
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "材料"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "配置文件"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "确认"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "此次打印可能出现了某些问题。点击查看调整提示。"
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "用于处理平面对象的支持库"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "您已经自定义了若干配置文件设置。\n"
+#~ "是否要在切换配置文件后保留这些更改的设置？\n"
+#~ "或者，也可舍弃更改以从“%1”加载默认值。"
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "打印平台(&B)"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "创建"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "复制"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "打印机：%1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "使用当前设置 / 重写值更新配置文件"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "主题："
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "需重新启动 Cura，新的设置才能生效。"
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "详细信息"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "创建"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "与打印机同步"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "打印机"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "单位"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "显示联机故障排除指南"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "从市场添加更多材料"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "将所有模型编位到所有打印平台"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "市场(&M)"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "查找、管理和安装新的Cura包。"
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "工具箱"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "提供仿真视图。"
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/zh_CN/fdmextruder.def.json.po b/resources/i18n/zh_CN/fdmextruder.def.json.po
index ee72d6c03b..beff14647a 100644
--- a/resources/i18n/zh_CN/fdmextruder.def.json.po
+++ b/resources/i18n/zh_CN/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: PCDotFan <pc@edu.ax>, Bothof <info@bothof.nl>\n"
diff --git a/resources/i18n/zh_CN/fdmprinter.def.json.po b/resources/i18n/zh_CN/fdmprinter.def.json.po
index b4fc48684b..36f7cc72e2 100644
--- a/resources/i18n/zh_CN/fdmprinter.def.json.po
+++ b/resources/i18n/zh_CN/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2021-04-16 15:04+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Chinese <info@lionbridge.com>, PCDotFan <pc@edu.ax>, Chinese <info@bothof.nl>\n"
@@ -57,7 +57,9 @@ msgctxt "machine_start_gcode description"
 msgid ""
 "G-code commands to be executed at the very start - separated by \n"
 "."
-msgstr "在开始时执行的 G-code 命令 - 以 \n 分行。"
+msgstr ""
+"在开始时执行的 G-code 命令 - 以 \n"
+" 分行。"
 
 #: fdmprinter.def.json
 msgctxt "machine_end_gcode label"
@@ -69,7 +71,9 @@ msgctxt "machine_end_gcode description"
 msgid ""
 "G-code commands to be executed at the very end - separated by \n"
 "."
-msgstr "在结束前执行的 G-code 命令 - 以 \n 分行。"
+msgstr ""
+"在结束前执行的 G-code 命令 - 以 \n"
+" 分行。"
 
 #: fdmprinter.def.json
 msgctxt "material_guid label"
@@ -463,8 +467,8 @@ msgstr "机器头和风扇多边形"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "打印头 2D 轮廓图（包含风扇盖）。"
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -737,6 +741,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "进料装置中材料驱动轮的直径。"
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "质量"
@@ -957,6 +971,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "壁数量。 在按壁厚计算时，该值舍入为整数。"
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "外壁擦嘴长度"
@@ -987,14 +1051,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "优化墙壁印刷的顺序，以减少回撤的数量和旅行的距离。大多数部件会从启用这个功能中受益，但有些可能会花费更长的时间，所以请将打印时间估算与不优化进行比较。第一层在选择边缘作为构建板附着力类型时没有进行优化。"
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "先外壁后内壁"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "启用时以从外向内的顺序打印壁。 当使用高粘度塑料如 ABS 时，这有助于提高 X 和 Y 的尺寸精度；但是，它可能会降低外表面打印质量，特别是在悬垂部分。"
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1007,94 +1081,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "每隔一层打印一个额外的壁。 通过这种方法，填充物会卡在这些额外的壁之间，从而产生更强韧的打印质量。"
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "补偿壁重叠"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "在壁已经存在时补偿所打印壁部分的流量。"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "补偿外壁重叠"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "在外壁已经存在时补偿所打印外壁部分的流量。"
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "补偿内壁重叠"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "在内壁已经存在时补偿所打印内壁部分的流量。"
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "最小壁流量"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "壁线允许的最小百分比流量。当某个壁靠近现有壁时，壁重叠补偿可减小其流量。流量小于此值的壁将由空驶替代。在使用此设置时，您必须启用壁重叠补偿并在打印内壁之前打印外壁。"
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "首选回抽"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "如启用，会使用回抽而不是梳理取代流量低于最小流量阈值的壁的空驶。"
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "填充壁之间空隙"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "在没有墙壁适合的位置填充墙壁之间的间隙。"
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "都不填充"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "打印薄壁"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "全部填充"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "打印在水平面上比喷嘴尺寸更薄的模型部件。"
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "滤除微小的间隙"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "滤除微小的间隙以减少模型外的光点。"
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "打印薄壁"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "打印在水平面上比喷嘴尺寸更薄的模型部件。"
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2196,6 +2260,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "为了补偿材料在冷却时的收缩，将用此因子缩放模型。"
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "晶体材料"
@@ -2706,24 +2790,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "前几层的打印速度比模型的其他层慢，以便实现与打印平台的更好粘着，并改善整体的打印成功率。 该速度在这些层中会逐渐增加。"
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "均衡耗材流量"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "以较快的速度打印比正常走线更细的走线，使每秒挤出的材料量保持相同。 模型中较薄的部分可能需要以低于设置中所提供宽度的走线宽度来打印走线。 该设置控制这些走线的速度变化。"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "均流最大速度"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "调整打印速度以便均衡流量时的最大打印速度。"
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4461,6 +4535,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "用于打印 skirt/brim/raft 的挤出机组。 用于多重挤出。"
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "Skirt 走线计数"
@@ -4625,6 +4739,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "顶部 Raft 层的 Raft 走线之间的距离。 间距应等于走线宽度，以便打造坚固表面。"
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "Raft 中间厚度"
@@ -5125,6 +5249,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "降低“最大分辨率”设置的分辨率时允许的最大偏移量。如果增加该值，打印作业的准确性将降低，但 g-code 将减小。“最大偏移量”是“最大分辨率”的限制，因此如果两者冲突，则“最大偏移量”将始终保持有效。"
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "特殊模式"
@@ -6419,6 +6553,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "第一层的微小特征将按正常打印速度的百分比进行打印。缓慢打印有助于粘合和提高准确性。"
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "命令行设置"
@@ -6478,6 +6642,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "在将模型从文件中载入时应用在模型上的转换矩阵。"
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "打印头 2D 轮廓图（包含风扇盖）。"
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "先外壁后内壁"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "启用时以从外向内的顺序打印壁。 当使用高粘度塑料如 ABS 时，这有助于提高 X 和 Y 的尺寸精度；但是，它可能会降低外表面打印质量，特别是在悬垂部分。"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "补偿壁重叠"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "在壁已经存在时补偿所打印壁部分的流量。"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "补偿外壁重叠"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "在外壁已经存在时补偿所打印外壁部分的流量。"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "补偿内壁重叠"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "在内壁已经存在时补偿所打印内壁部分的流量。"
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "最小壁流量"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "壁线允许的最小百分比流量。当某个壁靠近现有壁时，壁重叠补偿可减小其流量。流量小于此值的壁将由空驶替代。在使用此设置时，您必须启用壁重叠补偿并在打印内壁之前打印外壁。"
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "首选回抽"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "如启用，会使用回抽而不是梳理取代流量低于最小流量阈值的壁的空驶。"
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "填充壁之间空隙"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "在没有墙壁适合的位置填充墙壁之间的间隙。"
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "都不填充"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "全部填充"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "滤除微小的间隙"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "滤除微小的间隙以减少模型外的光点。"
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "均衡耗材流量"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "以较快的速度打印比正常走线更细的走线，使每秒挤出的材料量保持相同。 模型中较薄的部分可能需要以低于设置中所提供宽度的走线宽度来打印走线。 该设置控制这些走线的速度变化。"
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "均流最大速度"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "调整打印速度以便均衡流量时的最大打印速度。"
+
 #~ msgctxt "machine_start_gcode description"
 #~ msgid "G-code commands to be executed at the very start - separated by \\n."
 #~ msgstr "在开始时执行的 G-code 命令 - 以 \\n 分行。"
diff --git a/resources/i18n/zh_TW/cura.po b/resources/i18n/zh_TW/cura.po
index 0eab1c49e0..8bd978a277 100644
--- a/resources/i18n/zh_TW/cura.po
+++ b/resources/i18n/zh_TW/cura.po
@@ -6,8 +6,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
-"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2022-04-13 10:49+0200\n"
 "PO-Revision-Date: 2022-01-02 19:59+0800\n"
 "Last-Translator: Valen Chang  <carf17771@gmail.com>\n"
 "Language-Team: Valen Chang <carf17771@gmail.com>\n"
@@ -18,1429 +18,276 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 3.0\n"
 
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "無法從使用者資料目錄建立備份檔：{}"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:122 /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:159 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "備份"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "嘗試復原Cura 備份(若無proper data或meta data)。"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "嘗試復原新版本的Cura備份。"
-
-#: /home/clamboo/Desktop/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
-msgstr "恢復Cura備份時，出現下列錯誤:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr "再列印前請先同步線材資料."
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-msgctxt "@action:button"
-msgid "New materials installed"
-msgstr "新線材資料安裝"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-msgctxt "@action:button"
-msgid "Sync materials with printers"
-msgstr "列印機同步線材資料"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:71 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:80
-msgctxt "@action:button"
-msgid "Learn more"
-msgstr "學習更多"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
-msgstr "無法儲存線材資料至{}:"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
-msgstr "線材資料儲存失敗"
-
-#: /home/clamboo/Desktop/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
-msgstr "未知的錯誤."
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:99
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "由於「列印序列」設定的值，成形列印範圍高度已被減少，以防止龍門與列印模型相衝突。"
-
-#: /home/clamboo/Desktop/Cura/cura/BuildVolume.py:102
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "列印範圍"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "你確定要移除 {0} 嗎？這動作無法復原!"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "不覆寫"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1614
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "未知"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "下列印表機因為是群組的一部份導致無法連接"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "可用的網路印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "準備"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:338 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr "預設值"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura 列印參數"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "自訂列印參數"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "打開壓縮的三角面網格"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "所有支援的類型 ({0})"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "所有檔案 (*)"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "外觀"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "外觀參數是設計來列印較高品質形狀和表面的視覺性原型和模型。"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "工程"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "工程參數是設計來列印較高精度和較小公差的功能性原型和實際使用零件。"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "草稿"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/clamboo/Desktop/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "草稿參數是設計來縮短時間，快速列印初始原型和概念驗證。"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "自訂線材資料"
-
-#: /home/clamboo/Desktop/Cura/cura/Machines/Models/MaterialManagementModel.py:289 /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:346
-msgctxt "@label"
-msgid "Custom"
-msgstr "自訂"
-
-#: /home/clamboo/Desktop/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "登入失敗"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:24 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "正在為物件尋找新位置"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:28 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "尋找位置中"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "無法在列印範圍內放下全部物件"
-
-#: /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsJob.py:42 /home/clamboo/Desktop/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:152
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "無法找到位置"
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
-msgstr "無法建立與印表機同步的材料檔案."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr "無法載入與印表機同步的材料檔案."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr "從Digital Factory的回應似乎已損壞."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
-msgstr "從Digital Factory的回應似乎遺漏重要資訊."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
-msgstr "在連接至Digital Factory去同步材料的過程中失敗."
-
-#: /home/clamboo/Desktop/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
-msgstr "在連接至Digital Factory的過程中失敗."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:530
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "正在載入印表機..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:537
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "正在設定偏好設定..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:675
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "正在初始化啟用的機器..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:811
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "正在初始化機器管理員..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:825
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "正在初始化列印範圍..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:896
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "正在設定場景..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:932
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "正在載入介面..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:937
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "正在初始化引擎..."
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1254
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1807
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "一次只能載入一個 G-code 檔案。{0} 已跳過匯入"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1809 /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:217 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "警告"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1819
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "如果載入 G-code，則無法開啟其他任何檔案。{0} 已跳過匯入"
-
-#: /home/clamboo/Desktop/Cura/cura/CuraApplication.py:1821 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:156 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:166 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Error"
-msgstr "錯誤"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:67 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:286
-msgctxt "@action:button"
-msgid "Skip"
-msgstr "略過"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WhatsNewPagesModel.py:72 /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:485 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:127
-msgctxt "@action:button"
-msgid "Close"
-msgstr "關閉"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:57 /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "下一步"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/WelcomePagesModel.py:290 /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:26
-msgctxt "@action:button"
-msgid "Finish"
-msgstr "完成"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "增加"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:44
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:293
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "取消"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "群組 #{group_nr}"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "外壁"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "內壁"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "表層"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "填充"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "支撐填充"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "支撐介面"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "支撐"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "裙邊"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "裝填塔"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "移動"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "回抽"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "其它"
-
-#: /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:37 /home/clamboo/Desktop/Cura/cura/UI/TextManager.py:61
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
-msgstr "發佈通知無法開啟."
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:107
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura 無法啟動"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>糟糕，Ultimaker Cura 遇到了一些似乎不正常的事情。</p></b>\n"
-"                    <p>我們在啟動過程中遇到了無法修正的錯誤。這可能是由一些不正確的設定檔造成的。我們建議備份並重置您的設定。</p>\n"
-"                    <p>備份檔案可在設定資料夾中找到。</p>\n"
-"                    <p>請將錯誤報告傳送給我們以修正此問題。</p>\n"
-"                "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "傳送錯誤報告給 Ultimaker"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "顯示詳細的錯誤報告"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "顯示設定資料夾"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "備份和重置設定"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "錯誤報告"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Cura 發生了一個嚴重的錯誤。請將錯誤報告傳送給我們以修正此問題</p></b>\n"
-"            <p>請用\"送出報告\"按鈕自動發出一份錯誤報告到我們的伺服器</p>\n"
-"        "
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "系統資訊"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "未知"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Cura 版本"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Cura 語言"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr "作業系統語言"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "平台"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qt 版本"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQt 版本"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "尚未初始化<br/>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGL 版本：{version}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL 供應商：{vendor}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL 渲染器：{renderer}</li>"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "錯誤追溯"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "日誌"
-
-#: /home/clamboo/Desktop/Cura/cura/CrashHandler.py:417
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "送出報告"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "無法開始新的登入程序。檢查是否有其他登入仍在進行中。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "無法連上 Ultimaker 帳號伺服器。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr "登入失敗"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "提供的狀態不正確。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
-msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr "在向帳戶伺服器進行身分驗證時逾時."
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "核准此應用程式時，請給予所需的權限。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "嘗試登入時出現意外狀況，請再試一次。"
-
-#: /home/clamboo/Desktop/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "雲端沒有讀取回應。"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "正在複製並放置模型"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "正在放置模型"
-
-#: /home/clamboo/Desktop/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "擺放物件中"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "不支援"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "預設值"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:713 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "噴頭"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "設定已被更改為符合目前擠出機："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "設定更新"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/MachineManager.py:1480
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "擠出機已停用"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:207 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:140
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "檔案已經存在"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:208 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:141
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "檔案 <filename>{0}</filename> 已存在。你確定要覆蓋掉它嗎？"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:459 /home/clamboo/Desktop/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "無效的檔案網址："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:153
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "無法將列印參數匯出至 <filename>{0}</filename>：<message>{1}</message>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "無法將列印參數匯出至 <filename>{0}</filename>：寫入器外掛報告故障。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:171
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "列印參數已匯出至：<filename>{0}</filename>"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:173
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "匯出成功"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "無法從 <filename>{0}</filename> 匯入列印參數：{1}"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "在加入印表機前，無法從 <filename>{0}</filename> 匯入列印參數。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "檔案 <filename>{0}</filename> 內沒有自訂列印參數可匯入"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "從 <filename>{0}</filename> 匯入列印參數失敗："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:252 /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "列印參數 <filename>{0}</filename> 含有不正確的資料，無法匯入。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "從 <filename>{0}</filename> 匯入列印參數失敗："
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr "已成功匯入列印參數 {0}。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "檔案 {0} 內未含有效的列印參數。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "列印參數 {0} 檔案類型未知或已損壞。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "自訂列印參數"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:459
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "列印參數缺少列印品質類型定義。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr "尚未啟動列印機."
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr "無法新增列印參數。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr "品質類型 '{0}' 與目前的啟用的機器設定 '{1} '不相容。"
-
-#: /home/clamboo/Desktop/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "警告：列印參數無法顯示，因為它的品質類型 '{0}' 無法在目前設定使用。切換到可使用此品質類型的線材/噴頭組合。"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "單一模型設定"
-
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "設定對每個模型的單獨設定"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
 msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura 列印參數"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/clamboo/Desktop/Cura/plugins/X3DReader/__init__.py:13
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D 檔案"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "嘗試恢復備份時發生錯誤。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "備份"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "上傳你的備份時發生錯誤。"
+msgid "Stanford Triangle Format"
+msgstr "Stanford 三角形格式"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "正在建立備份..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "建立備份時發生了錯誤。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "無法存取更新資訊。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "正在上傳你的備份..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "新的問題修復功能適用於您的 {machine_name}! 如果你準備好了,推薦您將列印機的軟體升級至最新版本 {latest_version}."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "你的備份上傳完成。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr "新的%s軟體已可使用"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "備份超過了最大檔案大小。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "如何更新"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "管理備份"
-
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "印表機設定"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "支撐阻斷器"
-
-#: /home/clamboo/Desktop/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "建立一塊不列印支撐的空間。"
-
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "行動裝置"
+msgid "Monitor"
+msgstr "監控"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "儲存至行動裝置"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "儲存到行動裝置 {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "沒有可供寫入的檔案格式！"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "正在儲存到行動裝置 <filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "儲存中"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "無法儲存到 <filename>{0}</filename>：<message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "嘗試寫入到 {device} 時無法找到檔名。"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "無法儲存到行動裝置 {0}：{1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+msgctxt "@info:title"
+msgid "Error"
+msgstr "錯誤"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "儲存到行動裝置 {0}：{1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "檔案已儲存"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "卸載"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "卸載行動裝置 {0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "已卸載 {0}。現在你可以安全地移除行動裝置。"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "安全移除硬體"
 
-#: /home/clamboo/Desktop/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "無法卸載 {0}，可能有其它程式正在使用行動裝置。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "更新韌體"
-
-#: /home/clamboo/Desktop/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 列印參數"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "推薦"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "自訂選項"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:542
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "專案檔案 <filename>{0}</filename> 包含未知的機器類型 <message>{1}</message>。機器無法被匯入，但模型將被匯入。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "開啟專案檔案"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "專案檔案 <filename>{0}</filename> 無法存取：<message>{1}</message>。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:643 /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "無法開啟專案檔案"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr "專案檔案<filename>{0}</filename> 已毀損 : <message>{1}</message>."
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:703
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "專案檔案 <filename>{0}</filename> 使用了此版本 Ultimaker Cura 未知的參數製作。"
-
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:27 /home/clamboo/Desktop/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF 檔案"
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:57 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:72 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:94 /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "無法寫入 UFP 檔案："
-
-#: /home/clamboo/Desktop/Cura/plugins/UFPWriter/__init__.py:28 /home/clamboo/Desktop/Cura/plugins/UFPReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker 格式的封包"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:14 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code 檔案"
-
-#: /home/clamboo/Desktop/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "預覽"
-
-#: /home/clamboo/Desktop/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "透視檢視"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
-msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "正在處理層"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
 msgctxt "@info:title"
-msgid "Information"
-msgstr "資訊"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
-msgctxt "@message"
-msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
-msgstr "未知問題使切片失敗. 請考慮在我們的問題追蹤器內回報問題."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
-msgctxt "@message:title"
-msgid "Slicing failed"
-msgstr "切片失敗"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
-msgctxt "@message:button"
-msgid "Report a bug"
-msgstr "回報問題"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
-msgctxt "@message:description"
-msgid "Report a bug on Ultimaker Cura's issue tracker."
-msgstr "於Ultimaker Cura問題追蹤器中回報問題."
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "無法使用目前線材切片，因為它與所選機器或設定不相容。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "無法切片"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "無法使用目前設定進行切片。以下設定存在錯誤：{0}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "因部份模型設定問題無法進行切片。部份模型的下列設定有錯誤：{error_labels}"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "無法切片（原因：換料塔或主位置無效）。"
-
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "有物件使用了被停用的擠出機 %s ，因此無法進行切片。"
+msgid "Warning"
+msgstr "警告"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"請檢查設定並檢查你的模型是否：\n"
-"- 適合列印範圍\n"
-"- 分配了一個已啟用的擠出機\n"
-"- 沒有全部設定成修改網格"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "行動裝置"
 
-#: /home/clamboo/Desktop/Cura/plugins/AMFReader/__init__.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "AMF 檔案"
 
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzReader/__init__.py:17 /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "壓縮 G-code 檔案"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "後處理"
-
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "修改 G-Code 檔案"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB 連線列印"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "透過 USB 連線列印"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "透過 USB 連線列印"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "透過 USB 連接"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker 格式的封包"
 
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USB 列印正在進行中，關閉 Cura 將停止此列印工作。你確定要繼續嗎？"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "列印仍在進行中。列印完成前，Cura 無法透過 USB 開始另一次列印。"
-
-#: /home/clamboo/Desktop/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "列印正在進行中"
-
-#: /home/clamboo/Desktop/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "準備"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "正在解析 G-code"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:503
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-code 細項設定"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "發送檔案之前，請確保 G-code 適用於目前印表機和印表機設定。目前 G-code 檔案可能不準確。"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G 檔案"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG 圖片"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG 圖片"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG 圖片"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP 圖片"
-
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF 圖片"
+msgid "Per Model Settings"
+msgstr "單一模型設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "調整列印平台水平"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "設定對每個模型的單獨設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
-msgid "Select upgrades"
-msgstr "選擇升級"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "G-code GZ 寫入器不支援非文字模式。"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "無法存取更新資訊。"
+msgid "Update Firmware"
+msgstr "更新韌體"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "新的問題修復功能適用於您的 {machine_name}! 如果你準備好了,推薦您將列印機的軟體升級至最新版本 {latest_version}."
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
-msgstr "新的%s軟體已可使用"
-
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "如何更新"
-
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
-msgstr "無法讀取範例資料檔案."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:19
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "你需要結束並重新啟動 {} ，更動才能生效。"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "同步中..."
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:95 /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "從你的 Ultimaker 帳號偵測到資料更動"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "你要使用你的帳號同步線材資料和軟體套件嗎？"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "同步"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:41
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "拒絕並從帳號中刪除"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "下載外掛 {} 失敗"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "拒絕"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "同意"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "外掛授權協議"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "G-code 寫入器不支援非文字模式。"
-
-#: /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/clamboo/Desktop/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "匯出前請先將 G-code 準備好。"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:129
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "當鐵絲網列印（Wire Printing）功能開啟時，Cura 將無法準確地顯示列印層。"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura 偵測到群組 {0} 的管理主機上未安裝的線材參數。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "模擬檢視"
+msgid "Sending materials to printer"
+msgstr "向印表機傳送線材參數中"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:133
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "因為你還沒切片，沒有東西可顯示。"
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "你正在嘗試連接到 {0}，但它不是印表機群組的管理者。你可以透過網頁將其設定為印表機群組的管理者。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "沒有列印層可顯示"
-
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationView.py:136 /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "不要再顯示這個訊息"
-
-# Added manually to fix a string that was changed after string freeze.
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "分層檢視"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "網路連線列印"
+msgid "Not a group host"
+msgstr "不是印表機群組管理者"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "網路連線列印"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "設定印表機群組"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "透過網路連接"
+msgid "Sending Print Job"
+msgstr "正在傳送列印作業"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "明天"
+msgid "Uploading print job to printer."
+msgstr "正在上傳列印作業到印表機。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "today"
-msgstr "今天"
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr "列印作業隊列已滿，印表機無法再接受新的作業。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "透過網路連接"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr "隊列已滿"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "請等待目前作業傳送完成。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "列印錯誤"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "列印作業已成功傳送到印表機。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "資料傳送"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "你正在嘗試連接到一台未安裝 Ultimaker Connect 的印表機。請將印表機更新至最新版本的韌體。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "更新你印表機"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
-msgstr "列印作業隊列已滿，印表機無法再接受新的作業。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
-msgstr "隊列已滿"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "正在傳送列印作業"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "正在上傳列印作業到印表機。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura 偵測到群組 {0} 的管理主機上未安裝的線材參數。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "向印表機傳送線材參數中"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "雲端服務未上傳資料到印表機。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "網路錯誤"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "你正在嘗試連接到 {0}，但它不是印表機群組的管理者。你可以透過網頁將其設定為印表機群組的管理者。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "不是印表機群組管理者"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "設定印表機群組"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1450,133 +297,153 @@ msgstr ""
 "您的列印機 <b>{printer_name}</b> 可以透過雲端連接.\n"
 "\v透過連接Digital Factory使您可以任意管理列印順序及監控列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
 msgctxt "@info:title"
 msgid "Are you ready for cloud printing?"
 msgstr "您準備好雲端列印嗎?"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
 msgctxt "@action"
 msgid "Get started"
 msgstr "開始"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
 msgctxt "@action"
 msgid "Learn more"
 msgstr "學習更多"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "透過雲端服務列印"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "你正在嘗試連接到一台未安裝 Ultimaker Connect 的印表機。請將印表機更新至最新版本的韌體。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "更新你印表機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "雲端服務未上傳資料到印表機。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "網路錯誤"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "網路連線列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "透過雲端服務列印"
+msgid "Print over network"
+msgstr "網路連線列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "透過雲端服務連接"
+msgid "Connected over the network"
+msgstr "透過網路連接"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
-msgctxt "@action:button"
-msgid "Monitor print"
-msgstr "監控列印"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "明天"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
-msgstr "在Ultimaker Digital Factory中追蹤您的列印"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "今天"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "不明上傳列印作業錯誤代碼：{0}"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "透過網路連接"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "從你的 Ultimaker 帳號偵測到新的印表機"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "從你的帳號新增印表機 {name} （{model}）"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
 msgid_plural "... and {0} others"
 msgstr[0] "… 和 {0} 其他"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "從 Digital Factory 新增的印表機："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "印表機無法使用雲端連接"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "印表機未連到 Digital Factory："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "要建立連線，請前往 {website_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "保留印表機設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "移除印表機"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} 將被移除，直到下次帳號同步之前。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "要永久移除 {printer_name}，請前往 {digital_factory_link}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "你確定要暫時移除 {printer_name} 嗎？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "移除印表機？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1589,7 +456,7 @@ msgstr[0] ""
 "你將從 Cura 移除 {0} 印表機。此動作無法復原。\n"
 "你確定要繼續嗎？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1598,2006 +465,3120 @@ msgstr ""
 "你將從 Cura 移除所有印表機。此動作無法復原。\n"
 "你確定要繼續嗎？"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "打開壓縮的三角面網格"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "透過雲端服務列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "透過雲端服務列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "透過雲端服務連接"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
+msgstr "監控列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford 三角形格式"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr "在Ultimaker Digital Factory中追蹤您的列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "不明上傳列印作業錯誤代碼：{0}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D 模型助手"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#, python-brace-format
 msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
-msgstr "模型區域顯示已遺失或突出表面, 請修復您的模型並重新匯入Cura."
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>由於模型尺寸和線材設定的原因，一個或多個模型無法在最佳情狀下列印</p>\n"
+"<p>{model_names}</p>\n"
+"<p>了解如何確保最佳的列印品質和可靠性。</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">閱讀列印品質指南</a></p>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "當鐵絲網列印（Wire Printing）功能開啟時，Cura 將無法準確地顯示列印層。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/SolidView.py:73
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
 msgctxt "@info:title"
-msgid "Model Errors"
-msgstr "模型錯誤"
+msgid "Simulation View"
+msgstr "模擬檢視"
 
-#: /home/clamboo/Desktop/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "實體檢視"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "因為你還沒切片，沒有東西可顯示。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "沒有列印層可顯示"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "不要再顯示這個訊息"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
+# Added manually to fix a string that was changed after string freeze.
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "分層檢視"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "G-code 寫入器不支援非文字模式。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "匯出前請先將 G-code 準備好。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code 檔案"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "寫入 3mf 檔案發生錯誤。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "3MF 寫入器外掛已損壞。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr "無工作區可寫入，請先添加一部印表機."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "沒有寫入此處工作區的權限。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr "操作系統不允許將專案檔案儲存到此位置或儲存為此檔名。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "3MF 檔案"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Cura 專案 3MF 檔案"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "監控"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "壓縮 G-code 檔案"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+msgctxt "@message"
+msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
+msgstr "未知問題使切片失敗. 請考慮在我們的問題追蹤器內回報問題."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+msgctxt "@message:title"
+msgid "Slicing failed"
+msgstr "切片失敗"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+msgctxt "@message:button"
+msgid "Report a bug"
+msgstr "回報問題"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+msgctxt "@message:description"
+msgid "Report a bug on Ultimaker Cura's issue tracker."
+msgstr "於Ultimaker Cura問題追蹤器中回報問題."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "無法使用目前線材切片，因為它與所選機器或設定不相容。"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D 模型助手"
+msgid "Unable to slice"
+msgstr "無法切片"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "無法使用目前設定進行切片。以下設定存在錯誤：{0}"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
 #, python-brace-format
 msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "因部份模型設定問題無法進行切片。部份模型的下列設定有錯誤：{error_labels}"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "無法切片（原因：換料塔或主位置無效）。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "有物件使用了被停用的擠出機 %s ，因此無法進行切片。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
-"<p>由於模型尺寸和線材設定的原因，一個或多個模型無法在最佳情狀下列印</p>\n"
-"<p>{model_names}</p>\n"
-"<p>了解如何確保最佳的列印品質和可靠性。</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">閱讀列印品質指南</a></p>"
+"請檢查設定並檢查你的模型是否：\n"
+"- 適合列印範圍\n"
+"- 分配了一個已啟用的擠出機\n"
+"- 沒有全部設定成修改網格"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "網格類型"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "正在處理層"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "普通模型"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+msgctxt "@info:title"
+msgid "Information"
+msgstr "資訊"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "做為支撐"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D 檔案"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "修改重疊處設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG 圖片"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "重疊處不建立支撐"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG 圖片"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "只填充網格"
+msgid "PNG Image"
+msgstr "PNG 圖片"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "切割網格"
+msgid "BMP Image"
+msgstr "BMP 圖片"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:382
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "選擇設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF 圖片"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "選擇對此模型的自訂設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "噴頭"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:96
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "篩選..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "專案檔案 <filename>{0}</filename> 包含未知的機器類型 <message>{1}</message>。機器無法被匯入，但模型將被匯入。"
 
-#: /home/clamboo/Desktop/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "顯示全部"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "開啟專案檔案"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura 備份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "專案檔案 <filename>{0}</filename> 無法存取：<message>{1}</message>。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura 版本"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "無法開啟專案檔案"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr "專案檔案<filename>{0}</filename> 已毀損 : <message>{1}</message>."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "線材"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "專案檔案 <filename>{0}</filename> 使用了此版本 Ultimaker Cura 未知的參數製作。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "參數"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "推薦"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "外掛"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "自訂選項"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "想要更多？"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "3MF 檔案"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "立即備份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "無法寫入 UFP 檔案："
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "自動備份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 列印參數"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "每天啟動 Cura 時自動建立備份。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "備份"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "復原"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "上傳你的備份時發生錯誤。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "刪除備份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "正在建立備份..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:101
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "你確定要刪除此備份嗎？ 這動作無法復原。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "建立備份時發生了錯誤。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "復原備份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "正在上傳你的備份..."
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:110
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "在復原備份之前，你需要重新啟動 Cura。 你想要現在關閉 Cura 嗎？"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "你的備份上傳完成。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "備份並同步你的 Cura 設定。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "備份超過了最大檔案大小。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:225
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:171 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:53
-msgctxt "@button"
-msgid "Sign in"
-msgstr "登入"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "管理備份"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "我的備份"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
+msgctxt "@info:title"
+msgid "Backup"
+msgstr "備份"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "你目前沒有任何備份。 使用「立即備份」按鈕建立一個。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "嘗試恢復備份時發生錯誤。"
 
-#: /home/clamboo/Desktop/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "在預覽階段限制只能顯示 5 個備份。 刪除備份以顯示較舊的備份。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
+msgctxt "@text"
+msgid "Unable to read example data file."
+msgstr "無法讀取範例資料檔案."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "印表機設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "G-code GZ 寫入器不支援非文字模式。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (寬度)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "後處理"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "修改 G-Code 檔案"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (深度)"
+msgid "Support Blocker"
+msgstr "支撐阻斷器"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (高度)"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "建立一塊不列印支撐的空間。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "列印平台形狀"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "預覽"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "原點位於中心"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "透視檢視"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "熱床"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "調整列印平台水平"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "熱箱"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "選擇升級"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-code 類型"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "列印頭設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X 最小值"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y 最小值"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
-msgid "X max"
-msgstr "X 最大值"
+msgid "Installed Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y 最大值"
+msgid "Installed Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "吊車高度"
+msgid "Bundled Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "擠出機數目"
+msgid "Bundled Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
-msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr "將擠出機偏移設定至Gcode"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr "模型區域顯示已遺失或突出表面, 請修復您的模型並重新匯入Cura."
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "起始 G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr "模型錯誤"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "結束 G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr "學習更多"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "噴頭設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "實體檢視"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "噴頭孔徑"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "正在解析 G-code"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "相容的線材直徑"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-code 細項設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "噴頭偏移 X"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "發送檔案之前，請確保 G-code 適用於目前印表機和印表機設定。目前 G-code 檔案可能不準確。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "噴頭偏移 Y"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G 檔案"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "冷卻風扇數量"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "印表機設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "擠出機起始 G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB 連線列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "擠出機結束 G-code"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "透過 USB 連線列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "透過 USB 連線列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "更新韌體"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "透過 USB 連接"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
 msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "韌體是直接在 3D 印表機上運行的一個軟體。此韌體控制步進馬達，調節溫度讓印表機正常運作。"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USB 列印正在進行中，關閉 Cura 將停止此列印工作。你確定要繼續嗎？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "列印仍在進行中。列印完成前，Cura 無法透過 USB 開始另一次列印。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "列印正在進行中"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "正在載入印表機..."
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "正在設定偏好設定..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "正在初始化啟用的機器..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "正在初始化機器管理員..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "正在初始化列印範圍..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "正在設定場景..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "正在載入介面..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "正在初始化引擎..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "一次只能載入一個 G-code 檔案。{0} 已跳過匯入"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "如果載入 G-code，則無法開啟其他任何檔案。{0} 已跳過匯入"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "新印表機出廠配備的韌體完全可以正常使用，但新版本往往具有更多的新功能和改進。"
+msgid "Default"
+msgstr "預設值"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "自動升級韌體"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "外觀"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "上傳自訂韌體"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "外觀參數是設計來列印較高品質形狀和表面的視覺性原型和模型。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "因為沒有與印表機連線，無法更新韌體。"
+msgid "Engineering"
+msgstr "工程"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "工程參數是設計來列印較高精度和較小公差的功能性原型和實際使用零件。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "因為連線的印表機不支援更新韌體，無法更新韌體。"
+msgid "Draft"
+msgstr "草稿"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "選擇自訂韌體"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "草稿參數是設計來縮短時間，快速列印初始原型和概念驗證。"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "韌體更新"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "不覆寫"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "你確定要移除 {0} 嗎？這動作無法復原!"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "更新韌體中..."
+msgid "Unknown"
+msgstr "未知"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "韌體更新已完成。"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "下列印表機因為是群組的一部份導致無法連接"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "由於未知錯誤，韌體更新失敗。"
+msgid "Available networked printers"
+msgstr "可用的網路印表機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "已計算"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
+msgstr "再列印前請先同步線材資料."
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
+msgstr "新線材資料安裝"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
+msgctxt "@action:button"
+msgid "Sync materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "由於通訊錯誤，導致韌體更新失敗。"
+msgid "Custom Material"
+msgstr "自訂線材資料"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "由於輸入/輸出錯誤，導致韌體更新失敗。"
+msgid "Custom"
+msgstr "自訂"
 
-#: /home/clamboo/Desktop/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "由於韌體遺失，導致韌體更新失敗。"
+msgid "Custom profiles"
+msgstr "自訂列印參數"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "開啟專案"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "所有支援的類型 ({0})"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "更新已有設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "所有檔案 (*)"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "新建設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr "無法建立與印表機同步的材料檔案."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "摘要 - Cura 專案"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr "無法載入與印表機同步的材料檔案."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:94
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "印表機設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr "從Digital Factory的回應似乎已損壞."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "如何解決機器的設定衝突？"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr "從Digital Factory的回應似乎遺漏重要資訊."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:103
-msgctxt "@action:label"
-msgid "Type"
-msgstr "類型"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr "在連接至Digital Factory去同步材料的過程中失敗."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "印表機群組"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr "在連接至Digital Factory的過程中失敗."
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:219
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "列印參數設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "無法從使用者資料目錄建立備份檔：{}"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "如何解决列印參數中的設定衝突？"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "嘗試復原Cura 備份(若無proper data或meta data)。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:118 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:243
-msgctxt "@action:label"
-msgid "Name"
-msgstr "名稱"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "嘗試復原新版本的Cura備份。"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:260
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "意圖"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr "恢復Cura備份時，出現下列錯誤:"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:227
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "不在列印參數中"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "正在為物件尋找新位置"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:232
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 覆寫"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "尋找位置中"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "衍生自"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "無法在列印範圍內放下全部物件"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 覆寫"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+msgctxt "@info:title"
+msgid "Can't Find Location"
+msgstr "無法找到位置"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "線材設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
+msgctxt "@info:title"
+msgid "Login failed"
+msgstr "登入失敗"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "如何解决線材的設定衝突？"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "外壁"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "參數顯示設定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "內壁"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "模式"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "表層"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "顯示設定："
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "填充"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 / %2"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "支撐填充"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "載入專案時將清除列印平台上的所有模型。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "支撐介面"
 
-#: /home/clamboo/Desktop/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
-msgctxt "@action:button"
-msgid "Open"
-msgstr "開啟"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "支撐"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:20
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "後處理外掛"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "裙邊"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:59
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "後處理腳本"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "裝填塔"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:235
-msgctxt "@action"
-msgid "Add a script"
-msgstr "添加一個腳本"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "移動"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:282
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "回抽"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "其它"
+
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
 msgctxt "@label"
-msgid "Settings"
-msgstr "設定"
+msgid "Group #{group_nr}"
+msgstr "群組 #{group_nr}"
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:502
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "更改目前啟用的後處理腳本。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
+msgstr "發佈通知無法開啟."
 
-#: /home/clamboo/Desktop/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:506
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "下列為啟用中的腳本："
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+msgctxt "@action:button"
+msgid "Skip"
+msgstr "略過"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "轉換圖片..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
+msgctxt "@action:button"
+msgid "Close"
+msgstr "關閉"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "每個像素與底板的最大距離。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "增加"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "高度 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "完成"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "距離列印平台的底板高度，以毫米為單位。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "取消"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "底板 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
+msgctxt "@action:button"
+msgid "Next"
+msgstr "下一步"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "列印平台寬度，以毫米為單位。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
+msgctxt "@info:status"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "由於「列印序列」設定的值，成形列印範圍高度已被減少，以防止龍門與列印模型相衝突。"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "寬度 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "列印範圍"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "列印平台深度，以毫米為單位"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
+msgstr "無法儲存線材資料至{}:"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "深度 (mm)"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr "線材資料儲存失敗"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "若要列印浮雕，深色像素應該對應到較厚的位置，以阻擋更多的光通過。若要列印高度圖，淺色像素表示較高的地形，因此淺色像素應對應於產生的 3D 模型中較厚的位置。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr "未知的錯誤."
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "顏色越深高度越高"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "檔案已經存在"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "顏色越淺高度越高"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "檔案 <filename>{0}</filename> 已存在。你確定要覆蓋掉它嗎？"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "若要列印浮雕，使用一個簡易的對數模型計算半透明效果。若要列印高度圖，將像素值線性對應到高度。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
+msgctxt "@info:status"
+msgid "Invalid file URL:"
+msgstr "無效的檔案網址："
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "線性"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "不支援"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "半透明"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "預設值"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "光線穿透 1mm 厚度列印件的百分比。降低此值可增加暗部的對比度，並降低亮部的對比度。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "設定已被更改為符合目前擠出機："
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1mm 透明度"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "設定更新"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "影像平滑程度。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "擠出機已停用"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "平滑"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "無法將列印參數匯出至 <filename>{0}</filename>：<message>{1}</message>"
 
-#: /home/clamboo/Desktop/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "確定"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "無法將列印參數匯出至 <filename>{0}</filename>：寫入器外掛報告故障。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "請選擇適用於 Ultimaker Original 的更新檔案"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "列印參數已匯出至：<filename>{0}</filename>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "熱床（官方版本或自製版本）"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "匯出成功"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "列印平台調整水平"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "無法從 <filename>{0}</filename> 匯入列印參數：{1}"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "為了確保列印品質出色，你現在可以開始調整你的列印平台。當你點擊「移動到下一個位置」時，噴頭將移動到不同的可調節位置。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "在加入印表機前，無法從 <filename>{0}</filename> 匯入列印參數。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "在噴頭停止的每一個位置下方插入一張紙，並調整平台高度。當紙張恰好被噴頭的尖端輕微壓住時，表示列印平台已被校準在正確的高度。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "檔案 <filename>{0}</filename> 內沒有自訂列印參數可匯入"
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "開始進行列印平台調平"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "從 <filename>{0}</filename> 匯入列印參數失敗："
 
-#: /home/clamboo/Desktop/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "移動到下一個位置"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "列印參數 <filename>{0}</filename> 含有不正確的資料，無法匯入。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "更多關於匿名資料收集的資訊"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "從 <filename>{0}</filename> 匯入列印參數失敗："
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura 搜集匿名資料以提高列印品質和使用者體驗。以下是共享資料的範例："
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
+msgstr "已成功匯入列印參數 {0}。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "我不想傳送匿名資料"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "檔案 {0} 內未含有效的列印參數。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "允許傳送匿名資料"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "列印參數 {0} 檔案類型未知或已損壞。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "市集"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "自訂列印參數"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "需重新啟動 Cura，套件的更動才能生效。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "列印參數缺少列印品質類型定義。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "結束 %1"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
+msgstr "尚未啟動列印機."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
-msgstr "安裝"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr "無法新增列印參數。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "已安裝"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
+msgstr "品質類型 '{0}' 與目前的啟用的機器設定 '{1} '不相容。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "付費會員"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
+msgstr "警告：列印參數無法顯示，因為它的品質類型 '{0}' 無法在目前設定使用。切換到可使用此品質類型的線材/噴頭組合。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "前往網路市集"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:status"
+msgid "Multiplying and placing objects"
+msgstr "正在複製並放置模型"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "搜尋線材"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "正在放置模型"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "相容性"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "擺放物件中"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "機器"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "無法開始新的登入程序。檢查是否有其他登入仍在進行中。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "列印平台"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "無法連上 Ultimaker 帳號伺服器。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "支撐"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
+msgctxt "@info:title"
+msgid "Log-in failed"
+msgstr "登入失敗"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "品質"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "雲端沒有讀取回應。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "技術資料表"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "提供的狀態不正確。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "安全資料表"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr "在向帳戶伺服器進行身分驗證時逾時."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "列印指南"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "核准此應用程式時，請給予所需的權限。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "網站"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "嘗試登入時出現意外狀況，請再試一次。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "需要<a href='%1'>登入</a>才能進行安裝或升級"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura 無法啟動"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>購買線材線軸</a>"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>糟糕，Ultimaker Cura 遇到了一些似乎不正常的事情。</p></b>\n"
+"                    <p>我們在啟動過程中遇到了無法修正的錯誤。這可能是由一些不正確的設定檔造成的。我們建議備份並重置您的設定。</p>\n"
+"                    <p>備份檔案可在設定資料夾中找到。</p>\n"
+"                    <p>請將錯誤報告傳送給我們以修正此問題。</p>\n"
+"                "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
-msgid "Update"
-msgstr "更新"
+msgid "Send crash report to Ultimaker"
+msgstr "傳送錯誤報告給 Ultimaker"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "更新中"
+msgid "Show detailed crash report"
+msgstr "顯示詳細的錯誤報告"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "更新完成"
+msgid "Show configuration folder"
+msgstr "顯示設定資料夾"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
-msgid "Back"
-msgstr "返回"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "外掛"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:475
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "線材"
-
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "已安裝"
+msgid "Backup and Reset Configuration"
+msgstr "備份和重置設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "將在重新啟動時安裝"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "錯誤報告"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "需要<a href='%1'>登入</a>才能進行升級"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Cura 發生了一個嚴重的錯誤。請將錯誤報告傳送給我們以修正此問題</p></b>\n"
+"            <p>請用\"送出報告\"按鈕自動發出一份錯誤報告到我們的伺服器</p>\n"
+"        "
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "降級版本"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "系統資訊"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "移除"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "未知"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "社群貢獻"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Cura 版本"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "社群外掛"
+msgid "Cura language"
+msgstr "Cura 語言"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "通用線材"
+msgid "OS language"
+msgstr "作業系統語言"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "取得套件..."
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "平台"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
-msgid "Website"
-msgstr "網站"
+msgid "Qt version"
+msgstr "Qt 版本"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
-msgid "Email"
-msgstr "電子郵件"
+msgid "PyQt version"
+msgstr "PyQt 版本"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "請登入以取得 Ultimaker Cura Enterprise 驗証的外掛及線材"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
-msgid "Version"
-msgstr "版本"
+msgid "Not yet initialized<br/>"
+msgstr "尚未初始化<br/>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "最後更新時間"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGL 版本：{version}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "品牌"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL 供應商：{vendor}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "下載"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL 渲染器：{renderer}</li>"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "已安裝外掛"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "錯誤追溯"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "尚未安裝任何外掛。"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "日誌"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:87
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "已安裝線材"
+#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "送出報告"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
 msgctxt "@info"
-msgid "No material has been installed."
-msgstr "尚未安裝任何線材。"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"請確認你的印表機有連接：\n"
+"- 檢查印表機是否已打開。\n"
+"- 檢查印表機是否已連接到網路。\n"
+"- 檢查是否已登入以尋找雲端連接的印表機。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:141
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "捆綁式外掛"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "請將你的印表機連上網路。"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:186
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "捆綁式線材"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "查看線上使用者手冊"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
 msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "無法連上 Cura 套件資料庫。請檢查你的網路連線。"
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr "為了監控您的印表機，請連結印表機."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "你必需同意授權協議才能安裝套件"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "選擇對此模型的自訂設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "你帳戶的更動"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "篩選..."
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "捨棄"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "顯示全部"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:186
-msgctxt "@button"
-msgid "Next"
-msgstr "下一步"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "網格類型"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "將新增下列套件："
+msgid "Normal model"
+msgstr "普通模型"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "下列套件因 Cura 版本不相容，無法安裝："
+msgid "Print as support"
+msgstr "做為支撐"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "移除確認"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Modify settings for overlaps"
+msgstr "修改重疊處設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "你正在移除仍被使用的線材/列印設定。確認後會將下列耗材/列印設定重設為預設值。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
+msgctxt "@label"
+msgid "Don't support overlaps"
+msgstr "重疊處不建立支撐"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "線材"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "只填充網格"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "參數"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "切割網格"
 
-#: /home/clamboo/Desktop/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
 msgctxt "@action:button"
-msgid "Confirm"
-msgstr "確定"
+msgid "Select settings"
+msgstr "選擇設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "更新韌體"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "顏色方案"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "韌體是直接在 3D 印表機上運行的一個軟體。此韌體控制步進馬達，調節溫度讓印表機正常運作。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:110
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "線材顏色"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "新印表機出廠配備的韌體完全可以正常使用，但新版本往往具有更多的新功能和改進。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:114
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "線條類型"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "自動升級韌體"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:118
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "速度"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "上傳自訂韌體"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:122
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr "層厚"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "因為沒有與印表機連線，無法更新韌體。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:126
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr "線寬"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "因為連線的印表機不支援更新韌體，無法更新韌體。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:130
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr "流動"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "選擇自訂韌體"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:171
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "相容模式"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "韌體更新"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "移動軌跡"
+msgid "Updating firmware."
+msgstr "更新韌體中..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
 msgctxt "@label"
-msgid "Helpers"
-msgstr "輔助結構"
+msgid "Firmware update completed."
+msgstr "韌體更新已完成。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
 msgctxt "@label"
-msgid "Shell"
-msgstr "外殼"
+msgid "Firmware update failed due to an unknown error."
+msgstr "由於未知錯誤，韌體更新失敗。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263 /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
 msgctxt "@label"
-msgid "Infill"
-msgstr "填充"
+msgid "Firmware update failed due to an communication error."
+msgstr "由於通訊錯誤，導致韌體更新失敗。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:271
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
 msgctxt "@label"
-msgid "Starts"
-msgstr "啟動"
+msgid "Firmware update failed due to an input/output error."
+msgstr "由於輸入/輸出錯誤，導致韌體更新失敗。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "只顯示頂層"
+msgid "Firmware update failed due to missing firmware."
+msgstr "由於韌體遺失，導致韌體更新失敗。"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:332
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "顯示頂端 5 層列印細節"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "已中斷"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:346
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "頂 / 底層"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "已完成"
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:350
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "內壁"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "正在準備..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:419
-msgctxt "@label"
-msgid "min"
-msgstr "最小值"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "正在中斷..."
 
-#: /home/clamboo/Desktop/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:488
-msgctxt "@label"
-msgid "max"
-msgstr "最大值"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr "失敗"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "正在暫停..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "已暫停"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "正在繼續..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "需要採取的動作"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "在 %2 完成 %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "管理印表機"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
 msgid "Glass"
 msgstr "玻璃"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "請更新你印表機的韌體以便遠端管理工作隊列。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:288
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
 msgctxt "@info"
 msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
 msgstr "網路攝影機無法從Ultimaker Cura中瀏覽，請點擊\"管理列印機\"並從Ultimaker Digital Factory中瀏覽網路攝影機."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "正在載入..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "無法使用"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "無法連接"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "閒置中"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "正在準備..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "正在列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
 msgid "Untitled"
 msgstr "無標題"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "匿名"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "需要修改設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
 msgctxt "@action:button"
 msgid "Details"
 msgstr "細項"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "無法使用的印表機"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
-msgctxt "@label"
-msgid "First available"
-msgstr "可用的第一個"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "已排入隊列"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "使用瀏覽器管理"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "目前沒有列印作業在隊列中。可透過切片並傳送列印作來增加一個。"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "列印作業"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
-msgstr "總列印時間"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "等待"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:13
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "網路連線列印"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:54
-msgctxt "@action:button"
-msgid "Print"
-msgstr "列印"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:82
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "印表機選擇"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
 msgid "Configuration Changes"
 msgstr "修改設定"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
 msgctxt "@action:button"
 msgid "Override"
 msgstr "覆寫"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] "分配的印表機 %1 需要下列的設定更動："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr "已分配到印表機 %1，但列印工作含有未知的線材設定。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr "將線材 %1 從 %2 改成 %3。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr "將 %3 做為線材 %1 載入（無法覆寫）。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr "將 print core %1 從 %2 改成 %3。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr "將列印平台改成 %1（無法覆寫）。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "覆寫會將指定的設定套用在現有的印表機上。這可能導致列印失敗。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
 msgctxt "@label"
 msgid "Aluminum"
 msgstr "鋁"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "已完成"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "正在中斷..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "已中斷"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Failed"
-msgstr "失敗"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "正在暫停..."
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "已暫停"
-
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "正在繼續..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "網路連線列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:108
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "需要採取的動作"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:110
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "在 %2 完成 %1"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
+msgctxt "@label"
+msgid "Printer selection"
+msgstr "印表機選擇"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "連接到網路印表機"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "要透過網路列印，請確認你的印表機已透過網路線或 WIFI 連接到網路。若你無法讓 Cura 與印表機連線，你仍然可以使用 USB 裝置將 G-code 檔案傳輸到印表機。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "從下列清單中選擇你的印表機："
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "編輯"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:138 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "移除"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "刷新"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "如果你的印表機未被列出，請閱讀<a href='%1'>網路列印故障排除指南</a>"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "類型"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "韌體版本"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "位址"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "此印表機未被設定為管理印表機群組。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "此印表機為 %1 印表機群組的管理者。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "該網路位址的印表機尚無回應。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "連接"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "無效的 IP 位址"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "請輸入有效的 IP 位址 。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "印表機網路位址"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "輸入印表機的 IP 位址。"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
+msgctxt "@label"
+msgid "Unavailable printer"
+msgstr "無法使用的印表機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
+msgctxt "@label"
+msgid "First available"
+msgstr "可用的第一個"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "移至頂端"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "刪除"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
 msgctxt "@label"
 msgid "Resume"
 msgstr "繼續"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "正在暫停..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "正在繼續..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:285 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
 msgctxt "@label"
 msgid "Pause"
 msgstr "暫停"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "正在中斷..."
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "中斷"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "你確定要將 %1 移至隊列的頂端嗎？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "將列印作業移至最頂端"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "你確定要刪除 %1 嗎？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "刪除列印作業"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "你確定要中斷 %1 嗎？"
 
-#: /home/clamboo/Desktop/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "中斷列印"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
+msgctxt "@label"
+msgid "Queued"
+msgstr "已排入隊列"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "使用瀏覽器管理"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "目前沒有列印作業在隊列中。可透過切片並傳送列印作來增加一個。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "列印作業"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
+msgctxt "@label"
+msgid "Total print time"
+msgstr "總列印時間"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "等待"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
+msgctxt "@label"
+msgid "Color scheme"
+msgstr "顏色方案"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "線材顏色"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "線條類型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "速度"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr "層厚"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr "線寬"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr "流動"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "相容模式"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
+msgctxt "@label"
+msgid "Travels"
+msgstr "移動軌跡"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
+msgctxt "@label"
+msgid "Helpers"
+msgstr "輔助結構"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
+msgctxt "@label"
+msgid "Shell"
+msgstr "外殼"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "填充"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
+msgctxt "@label"
+msgid "Starts"
+msgstr "啟動"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
+msgctxt "@label"
+msgid "Only Show Top Layers"
+msgstr "只顯示頂層"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "顯示頂端 5 層列印細節"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
+msgctxt "@label"
+msgid "Top / Bottom"
+msgstr "頂 / 底層"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "內壁"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
+msgctxt "@label"
+msgid "min"
+msgstr "最小值"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
+msgctxt "@label"
+msgid "max"
+msgstr "最大值"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+msgctxt "@title:window"
+msgid "Convert Image"
 msgstr ""
-"請確認你的印表機有連接：\n"
-"- 檢查印表機是否已打開。\n"
-"- 檢查印表機是否已連接到網路。\n"
-"- 檢查是否已登入以尋找雲端連接的印表機。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "請將你的印表機連上網路。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "高度 (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "查看線上使用者手冊"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "每個像素與底板的最大距離。"
 
-#: /home/clamboo/Desktop/Cura/plugins/MonitorStage/MonitorMain.qml:172
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr "為了監控您的印表機，請連結印表機."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "底板 (mm)"
 
-#: /home/clamboo/Desktop/Cura/plugins/ModelChecker/ModelChecker.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "此列印可能會有些問題。點擊查看調整提示。"
+msgid "The base height from the build plate in millimeters."
+msgstr "距離列印平台的底板高度，以毫米為單位。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "寬度 (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:27
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "立體圖"
+msgid "The width in millimeters on the build plate"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "深度 (mm)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:40
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "前視圖"
+msgid "The depth in millimeters on the build plate"
+msgstr "列印平台深度，以毫米為單位"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "顏色越深高度越高"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "顏色越淺高度越高"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "上視圖"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "若要列印浮雕，深色像素應該對應到較厚的位置，以阻擋更多的光通過。若要列印高度圖，淺色像素表示較高的地形，因此淺色像素應對應於產生的 3D 模型中較厚的位置。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+msgctxt "@action:label"
+msgid "Color Model"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "線性"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:66
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "半透明"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "左視圖"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "若要列印浮雕，使用一個簡易的對數模型計算半透明效果。若要列印高度圖，將像素值線性對應到高度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1mm 透明度"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewOrientationControls.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "右視圖"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "光線穿透 1mm 厚度列印件的百分比。降低此值可增加暗部的對比度，並降低亮部的對比度。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "物件清單"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "平滑"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "影像平滑程度。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
 msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "市集"
+msgid "OK"
+msgstr "確定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "檔案（&F）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "開啟專案"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "編輯（&E）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "更新已有設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "檢視（&V）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "新建設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:60 /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "設定（&S）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "摘要 - Cura 專案"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:66
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "擴充功能（&X）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "如何解決機器的設定衝突？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:112
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "偏好設定（&R）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "印表機設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:120
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "幫助（&H）"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Type"
+msgstr "類型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:166
-msgctxt "@title:window"
-msgid "New project"
-msgstr "新建專案"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "印表機群組"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MainWindow/ApplicationMenu.qml:167
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "你確定要開始一個新專案嗎？這將清除列印平台及任何未儲存的設定。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "如何解决列印參數中的設定衝突？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "正在切片..."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "列印參數設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:82
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "無法切片"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
+msgctxt "@action:label"
+msgid "Name"
+msgstr "名稱"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "意圖"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "不在列印參數中"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 覆寫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "衍生自"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 覆寫"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "如何解决線材的設定衝突？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "線材設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "參數顯示設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "模式"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "顯示設定："
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 / %2"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "載入專案時將清除列印平台上的所有模型。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
+msgctxt "@action:button"
+msgid "Open"
+msgstr "開啟"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "處理中"
+msgid "Want more?"
+msgstr "想要更多？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "切片"
+msgid "Backup Now"
+msgstr "立即備份"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:122
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "開始切片程序"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "自動備份"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:136
-msgctxt "@button"
-msgid "Cancel"
-msgstr "取消"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "每天啟動 Cura 時自動建立備份。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "時間估計"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura 版本"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "線材估計"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "線材"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "參數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "沒有時間估計"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "外掛"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "沒有成本估算"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "復原"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "刪除備份"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "你確定要刪除此備份嗎？ 這動作無法復原。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "復原備份"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "在復原備份之前，你需要重新啟動 Cura。 你想要現在關閉 Cura 嗎？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "備份並同步你的 Cura 設定。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
 msgctxt "@button"
-msgid "Preview"
-msgstr "預覽"
+msgid "Sign in"
+msgstr "登入"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "新增印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "我的備份"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "你目前沒有任何備份。 使用「立即備份」按鈕建立一個。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "在預覽階段限制只能顯示 5 個備份。 刪除備份以顯示較舊的備份。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura 備份"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "更多關於匿名資料收集的資訊"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura 搜集匿名資料以提高列印品質和使用者體驗。以下是共享資料的範例："
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "我不想傳送匿名資料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "允許傳送匿名資料"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "後處理外掛"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "新增網路印表機"
+msgid "Post Processing Scripts"
+msgstr "後處理腳本"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
+msgctxt "@action"
+msgid "Add a script"
+msgstr "添加一個腳本"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "新增非網路印表機"
+msgid "Settings"
+msgstr "設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "更改目前啟用的後處理腳本。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "下列為啟用中的腳本："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "新增雲端印表機"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "請選擇適用於 Ultimaker Original 的更新檔案"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "等待雲端服務回應"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "熱床（官方版本或自製版本）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "列印平台調整水平"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "在你的帳號未發現任何印表機？"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "為了確保列印品質出色，你現在可以開始調整你的列印平台。當你點擊「移動到下一個位置」時，噴頭將移動到不同的可調節位置。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "下列您帳號中的印表機已新增至 Cura："
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "在噴頭停止的每一個位置下方插入一張紙，並調整平台高度。當紙張恰好被噴頭的尖端輕微壓住時，表示列印平台已被校準在正確的高度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "開始進行列印平台調平"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "移動到下一個位置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+msgctxt "@title"
+msgid "Loading..."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "手動新增印表機"
+msgid "Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "使用 IP 位址新增印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+msgctxt "@button"
+msgid "Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "輸入印表機的 IP 位址。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+msgctxt "@info"
+msgid "Search in the browser"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
 msgctxt "@button"
-msgid "Add"
-msgstr "新增"
+msgid "In order to use the package you will need to restart Cura"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "無法連接到裝置。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "結束 %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
 msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "無法連接到 Ultimaker 印表機？"
+msgid "By"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "此位址的印表機尚未回應。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Enable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "無法添加此印表機，因為它是未知的印表機，或者它不是印表機群組的主機。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+msgctxt "@button"
+msgid "Disable"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:707
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
 msgctxt "@button"
-msgid "Back"
-msgstr "返回"
+msgid "Downgrading..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
 msgctxt "@button"
-msgid "Connect"
-msgstr "連接"
+msgid "Downgrade"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "使用者授權"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+msgctxt "@button"
+msgid "Installing..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "拒絕並關閉"
+msgid "Install"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "歡迎來到 Ultimaker Cura"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+msgctxt "@button"
+msgid "Uninstall"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
-msgstr "請依照步驟安裝Ultimaker Cura. 這會需要幾分鐘的時間."
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+msgctxt "@button"
+msgid "Updating..."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
 msgctxt "@button"
-msgid "Get started"
-msgstr "開始"
+msgid "Update"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:64 /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:20
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
-msgstr "登入Ultimaker 論壇"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+msgctxt "@header"
+msgid "Install Plugins"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
-msgstr "從市集中加入線材設定或插件"
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:154
-msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
-msgstr "備份及同步您的線材設定與插件"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+msgctxt "@header"
+msgid "Description"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+msgctxt "@header"
+msgid "Compatible printers"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+msgctxt "@info"
+msgid "No compatibility information"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+msgctxt "@header"
+msgid "Compatible support materials"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+msgctxt "@info No materials"
+msgid "None"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+msgctxt "@header"
+msgid "Compatible with Material Station"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "Yes"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+msgctxt "@info"
+msgid "No"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+msgctxt "@header"
+msgid "Optimized for Air Manager"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Visit plug-in website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+msgctxt "@button"
+msgid "Website"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+msgctxt "@button"
+msgid "Buy spool"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+msgctxt "@button"
+msgid "Safety datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+msgctxt "@button"
+msgid "Technical datasheet"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
+msgctxt "@header"
+msgid "Package details"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
-msgstr "分享創意並可從Ultimaker社群中超過48000的使用者得到幫助"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
 msgctxt "@button"
-msgid "Skip"
-msgstr "略過"
+msgid "Accept"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
+msgctxt "@button"
+msgid "Decline"
+msgstr "拒絕"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Failed to load packages:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+msgctxt "@button"
+msgid "Retry?"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+msgctxt "@button"
+msgid "Loading"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No more results to load"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+msgctxt "@message"
+msgid "No results found with current filter"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+msgctxt "@button"
+msgid "Load more"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
 msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr "創建免費的Ultimaker帳戶"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:234
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "印表機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "噴頭設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr "製造商"
+msgid "Nozzle size"
+msgstr "噴頭孔徑"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Profile author"
-msgstr "列印參數作者"
+msgid "mm"
+msgstr "mm"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Printer name"
-msgstr "印表機名稱"
+msgid "Compatible material diameter"
+msgstr "相容的線材直徑"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:278
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "請為你的印表機取一個名稱"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "噴頭偏移 X"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "在你的網路上找不到印表機。"
+msgid "Nozzle offset Y"
+msgstr "噴頭偏移 Y"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
-msgid "Refresh"
-msgstr "更新"
+msgid "Cooling Fan Number"
+msgstr "冷卻風扇數量"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "擠出機起始 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "擠出機結束 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "印表機設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "使用 IP 位址新增印表機"
+msgid "X (Width)"
+msgstr "X (寬度)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "新增雲端印表機"
+msgid "Y (Depth)"
+msgstr "Y (深度)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:241
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "故障排除"
+msgid "Z (Height)"
+msgstr "Z (高度)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "協助我們改進 Ultimaker Cura"
+msgid "Build plate shape"
+msgstr "列印平台形狀"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura 搜集匿名資料以提高列印品質和使用者體驗，包含："
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "原點位於中心"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "機器類型"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "熱床"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "線材用法"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "熱箱"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "切片次數"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-code 類型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "列印設定"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "列印頭設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura 收集的資料不包含任何個人資訊。"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X 最小值"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "更多資訊"
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y 最小值"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "What's New"
-msgstr "新功能"
+msgid "X max"
+msgstr "X 最大值"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Empty"
-msgstr "空的"
+msgid "Y max"
+msgstr "Y 最大值"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Release Notes"
-msgstr "發佈通知"
+msgid "Gantry Height"
+msgstr "吊車高度"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "擠出機數目"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr "將擠出機偏移設定至Gcode"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "起始 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "結束 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
+msgstr "我的列印機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
+msgstr "從Ultimaker Digital Factory中監控我的列印機."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
+msgstr "從 Digital Library中創建列印專案."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
+msgstr "列印工作"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
+msgstr "監控列印工作並於從您的歷史紀錄中再次列印."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
+msgstr "使用插件及線材參數擴充Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
+msgstr "使用Ultimaker e-learning成為一位3D列印專家."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
+msgstr "Ultimaker 支援"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
+msgstr "學習如何開始使用Ultimaker Cura."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
+msgstr "提出問題"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
+msgstr "諮詢Ultimaker社群."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr "回報Bug"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr "讓開發者了解您遇到的問題."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr "參觀Ultimaker網站."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "用 %1 列印所選模型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "設定（&S）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "新建專案"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "你確定要開始一個新專案嗎？這將清除列印平台及任何未儲存的設定。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "市集"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+msgctxt "@label"
+msgid "Build plate"
+msgstr "列印平台"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "熱床的目標溫度。熱床將加熱或冷卻至此溫度。若設定為 0，則不使用熱床。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "熱床目前溫度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "熱床的預熱溫度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "取消"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "預熱"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "列印前請預熱熱床。你可以在熱床加熱時繼續調整相關物件，讓你在準備列印時不必等待熱床加熱完畢。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "尚未連線到印表機。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "印表機控制"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "輕搖位置"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "輕搖距離"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "傳送 G-code"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "傳送一個自訂的 G-code 命令到連接中的印表機。按下 Enter 鍵傳送命令。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+msgctxt "@label"
+msgid "Extruder"
+msgstr "擠出機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "加熱頭的目標溫度。加熱頭將加熱或冷卻至此溫度。若設定為 0，則關閉加熱頭的加熱。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "此加熱頭的目前溫度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "加熱頭預熱溫度。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "列印前預先加熱。你可以在加熱時繼續調整你的列印，當你準備好列印時就不需等待加熱頭升溫。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "該擠出機中線材的顏色。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "該擠出機中的線材。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "該擠出機所使用的噴頭。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "開啟專案檔案"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "這是一個 Cura 專案檔案。你想將其作為一個專案開啟還是從中匯入模型？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "記住我的選擇"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "作為專案開啟"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "匯入模型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "儲存專案"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "擠出機 %1"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & 線材"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
+msgctxt "@action:label"
+msgid "Material"
+msgstr "線材"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "儲存時不再顯示專案摘要"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
+msgctxt "@action:button"
+msgid "Save"
+msgstr "儲存"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "開啟檔案"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "我們已經在你所選擇的檔案中找到一個或多個專案檔案，但一次只能開啟一個專案檔案。我們建議只從那些檔案中匯入模型而不開啟專案。你要繼續操作嗎？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "匯入所有模型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "關於 %1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "版本：%1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "熔絲 3D 列印技術的的端對端解決方案。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3606,2194 +3587,2378 @@ msgstr ""
 "Cura 由 Ultimaker B.V. 與社群合作開發。\n"
 "Cura 使用以下開源專案："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "圖形用戶介面"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Application framework"
 msgstr "應用框架"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code 產生器"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "進程間通訊交互使用庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
 msgctxt "@label"
 msgid "Programming language"
 msgstr "編程語言"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI 框架"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI 框架綁定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C / C++ 綁定庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "資料交換格式"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "科學計算函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "高速運算函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "用於處理 STL 檔案的函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:148
-msgctxt "@label"
-msgid "Support library for handling planar objects"
-msgstr "用於處理平面物件的函式庫"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "用於處理三角形網格的函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "用於處理 3MF 檔案的函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "用於檔案 metadata 和串流的函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "串口通訊函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf 發現函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "多邊形剪輯函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+msgctxt "@label"
+msgid "Python bindings for Clipper"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Python 靜態型別檢查器"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "驗證 SSL 可信度用的根憑證"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python 錯誤追蹤函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "多邊形包裝函式庫，由 Prusa Research 開發"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Python bindings for libnest2d"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Support library for system keyring access"
 msgstr "存取系統金鑰函式庫"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "Python extensions for Microsoft Windows"
 msgstr "Python擴充(windows)"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Font"
 msgstr "字體"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG 圖標"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux cross-distribution 應用程式部署"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:645
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "開啟檔案"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "我們已經在你所選擇的檔案中找到一個或多個專案檔案，但一次只能開啟一個專案檔案。我們建議只從那些檔案中匯入模型而不開啟專案。你要繼續操作嗎？"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "匯入所有模型"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:16
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "儲存專案"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:174
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "擠出機 %1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:190
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & 線材"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:192
-msgctxt "@action:label"
-msgid "Material"
-msgstr "線材"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "儲存時不再顯示專案摘要"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:301
-msgctxt "@action:button"
-msgid "Save"
-msgstr "儲存"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:16
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "捨棄或保留更改"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:58
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
 msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
-"你修改了一些參數設定。\n"
-"你要在切換參數後保留這些更動嗎？\n"
-"或者你也可以忽略這些更動，從 '%1' 載入預設值。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:112
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "列印參數設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:126
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
 msgctxt "@title:column"
 msgid "Current changes"
 msgstr "目前更動"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:755
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "總是詢問"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:161
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "捨棄更改，並不再詢問此問題"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "保留更改，並不再詢問此問題"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:199
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
 msgctxt "@action:button"
 msgid "Discard changes"
 msgstr "忽略更動"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
 msgctxt "@action:button"
 msgid "Keep changes"
 msgstr "保留更動"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "開啟專案檔案"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
+msgstr "沒有可選取的專案"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "這是一個 Cura 專案檔案。你想將其作為一個專案開啟還是從中匯入模型？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr "開啟檔案."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "記住我的選擇"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "最近開啟的檔案（&R）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "作為專案開啟"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "顯示設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "匯入模型"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "折疊所有分類"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "管理參數顯示..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "線材（&M）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "設為主要擠出機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "啟用擠出機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "關閉擠出機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "線材"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "常用"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "通用"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "幫助（&H）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "檔案（&F）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "儲存專案...（&S）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "匯出...（&E）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "匯出選擇..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "偏好設定（&R）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "編輯（&E）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "印表機（&P）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "支援網路的印表機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "本機印表機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "擴充功能（&X）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Active print"
-msgstr "正在列印"
+msgid "Loading available configurations from the printer..."
+msgstr "從印表機載入可用的設定..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Job Name"
-msgstr "作業名稱"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "由於印表機已斷線，因此設定無法使用。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "列印時間"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "由於無法識別 %1，因此無法使用此設定。 請連上 %2 下載正確的線材參數設定。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "預計剩餘時間"
+msgid "Marketplace"
+msgstr "市集"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "雲端印表機為離線狀態。請檢查印表機是否已開機並連上網路。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr "不允許使用此擠出機的配置並禁止切片功能."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "此印表機未連接到你的帳號。請前往 Ultimaker Digital Factory 建立連接。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr "目前無對應此擠出機的配置設定."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "雲端服務目前無法使用。請登入以連接到雲端印表機。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "選擇設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "雲端服務目前無法使用。請檢查你的網路連線。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
+msgctxt "@label"
+msgid "Configurations"
+msgstr "設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
-msgctxt "@button"
-msgid "Add printer"
-msgstr "新增印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "自訂選項"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelector.qml:269
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "管理印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "已連線印表機"
+msgid "Enabled"
+msgstr "已啟用"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "預設印表機"
+msgid "Material"
+msgstr "線材"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
 msgctxt "@label"
-msgid "Print settings"
-msgstr "列印設定"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "在此線材組合下，使用膠水以獲得較佳的附著。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "列印設定已被停用。 G-code 檔案無法修改。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "列印所選模型："
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "複製所選模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr "參數"
+msgid "Number of Copies"
+msgstr "複製個數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr "儲存專案."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "檢視（&V）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "視角位置（&C）"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "攝影機檢視"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "透視"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "正交"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "檢示類型"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr "登入Ultimaker 論壇"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
 msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
-"部份設定/覆寫值與儲存在列印參數中的值不同。\n"
-"\n"
-"點擊開啟列印參數管理器。"
+"- 從市集中加入線材參數及插件\n"
+"-備份及同步您的線材設定與插件 \n"
+"- 分享創意並可從Ultimaker社群中超過48000的使用者得到幫助"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "自訂列印參數"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr "創建免費的Ultimaker帳戶"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "捨棄目前更改"
+msgid "Sign in"
+msgstr "登入"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "最後一次更新：%1"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
 msgctxt "@button"
-msgid "Recommended"
-msgstr "推薦"
+msgid "Ultimaker Account"
+msgstr "Ultimaker 帳號"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
 msgctxt "@button"
-msgid "Custom"
-msgstr "自訂選項"
+msgid "Sign Out"
+msgstr "登出"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "檢查中..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "帳號已同步"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "出了些問題..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "安裝待處理的更新"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "檢查帳號更新"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "正在切片..."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "無法切片"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Processing"
+msgstr "處理中"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
+msgctxt "@button"
+msgid "Slice"
+msgstr "切片"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
+msgctxt "@label"
+msgid "Start the slicing process"
+msgstr "開始切片程序"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
+msgctxt "@button"
+msgid "Cancel"
+msgstr "取消"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "時間估計"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "線材估計"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+msgctxt "@label"
+msgid "No time estimation available"
+msgstr "沒有時間估計"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "沒有成本估算"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "預覽"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "此套件將在重新啟動後安裝。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+msgctxt "@title:tab"
+msgid "General"
+msgstr "基本"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "印表機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "線材"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "列印參數"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "關閉 %1 中"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "是否確定要離開 %1 ？"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "安裝套件"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "開啟檔案"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "我們已經在你選擇的檔案中找到一個或多個 G-Code 檔案。你一次只能開啟一個 G-Code 檔案。若需開啟 G-Code 檔案，請僅選擇一個。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "新增印表機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "新功能"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
 msgctxt "@label:Should be short"
 msgid "On"
 msgstr "開啟"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
 msgctxt "@label:Should be short"
 msgid "Off"
 msgstr "關閉"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
 msgctxt "@label"
 msgid "Experimental"
 msgstr "實驗功能"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@label"
+msgid "Print settings"
+msgstr "列印設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "列印設定已被停用。 G-code 檔案無法修改。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "推薦"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "自訂選項"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
 msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
 msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
 msgstr[0] "沒有擠出機 %2 用的 %1 參數。將使用預設參數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:736
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
 msgctxt "@label"
-msgid "Profiles"
-msgstr "列印參數"
+msgid "Gradual infill"
+msgstr "漸近式填充"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:82
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "你修改過部份列印參數設定。如果你想改變這些設定，請切換到自訂模式。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "漸近式填充將隨著列印高度的提升而逐漸加大填充密度。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
 msgctxt "@label"
 msgid "Support"
 msgstr "支撐"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:72
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
 msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "在模型的突出部分產生支撐結構。若不這樣做，這些部分在列印時將倒塌。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:196
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "漸近式填充"
+msgid "Profiles"
+msgstr "列印參數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:235
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "漸近式填充將隨著列印高度的提升而逐漸加大填充密度。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "你修改過部份列印參數設定。如果你想改變這些設定，請切換到自訂模式。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
 msgid "Adhesion"
 msgstr "附著"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:75
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "允許列印邊緣或木筏。這將在你的物件周圍或下方添加一個容易切斷的平面區域。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr "儲存專案."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "自訂列印參數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "支援網路的印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "捨棄目前更改"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "本機印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "參數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "線材"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"部份設定/覆寫值與儲存在列印參數中的值不同。\n"
+"\n"
+"點擊開啟列印參數管理器。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "常用"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "通用"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "列印參數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "列印所選模型："
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column"
+msgid "Current"
+msgstr "目前"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:116
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
 msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "複製所選模型"
+msgid "Rename"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ContextMenu.qml:141
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "複製個數"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:41
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "儲存專案...（&S）"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:74
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "匯出...（&E）"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
+msgstr[0] ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/FileMenu.qml:85
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "匯出選擇..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "參數顯示設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "自訂選項"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "全選"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "啟用"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "重命名"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "直徑更改確認"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "新的線材直徑設定為 %1 mm，這與目前的擠出機不相容。你要繼續嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Printer"
-msgstr "印表機"
+msgid "Display Name"
+msgstr "顯示名稱"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Enabled"
-msgstr "已啟用"
+msgid "Brand"
+msgstr "品牌"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Material"
-msgstr "線材"
+msgid "Material Type"
+msgstr "線材類型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:407
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "在此線材組合下，使用膠水以獲得較佳的附著。"
+msgid "Color"
+msgstr "顏色"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:102
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
-msgstr "不允許使用此擠出機的配置並禁止切片功能."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
+msgctxt "@title"
+msgid "Material color picker"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
-msgstr "目前無對應此擠出機的配置設定."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
+msgctxt "@label"
+msgid "Properties"
+msgstr "屬性"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:253
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "選擇設定"
+msgid "Density"
+msgstr "密度"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:364
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
 msgctxt "@label"
-msgid "Configurations"
-msgstr "設定"
+msgid "Diameter"
+msgstr "直徑"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "從印表機載入可用的設定..."
+msgid "Filament Cost"
+msgstr "線材成本"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "由於印表機已斷線，因此設定無法使用。"
+msgid "Filament weight"
+msgstr "線材重量"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "由於無法識別 %1，因此無法使用此設定。 請連上 %2 下載正確的線材參數設定。"
+msgid "Filament length"
+msgstr "線材長度"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "市集"
+msgid "Cost per Meter"
+msgstr "每公尺成本"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr "開啟檔案."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "此線材與 %1 相關聯，並共享其部份屬性。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "印表機（&P）"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "解除聯結線材"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "線材（&M）"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+msgctxt "@label"
+msgid "Description"
+msgstr "描述"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "設為主要擠出機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "附著資訊"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "啟用擠出機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
+msgctxt "@title"
+msgid "Information"
+msgstr "資訊"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "關閉擠出機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr "同步印表機線材設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "最近開啟的檔案（&R）"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr "同步印表機線材設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "顯示設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
+msgctxt "@text"
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
+msgstr "依照下述簡單的步驟。您將同步線材設定檔至您的印表機."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "折疊所有分類"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
+msgctxt "@button"
+msgid "Why do I need to sync material profiles?"
+msgstr "為何我需要同步線材設定檔?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "管理參數顯示..."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
+msgctxt "@button"
+msgid "Start"
+msgstr "開始"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "視角位置（&C）"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
+msgctxt "@title:header"
+msgid "Sign in"
+msgstr "登入"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:45
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "攝影機檢視"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr "為了自動將線材設定檔與所有連接到 Digital Factory 的列印機同步，您必須先從Cura進行登入."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "透視"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr "從USB進行同步線材設定檔"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "正交"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr "下述的印表機將新增新的線材設定檔:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Menus/ViewMenu.qml:79
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "列印平台（&B）"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr "再發送線材設定檔至印表機時發生錯誤."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "檢示類型"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr "線材設定檔成功同步至下述的印表機內:"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Is printed as support."
-msgstr "做為支撐而列印。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
+msgctxt "@button"
+msgid "Troubleshooting"
+msgstr "故障排除"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "與此模型重疊的其他模型已被更改。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
+msgstr "列印機資訊遺失了?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "與此模型重疊的填充已被更改。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr "確認您的列印機已開機並連接至Digital Factory."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:121
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "與此模型的重疊沒有支撐。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
+msgctxt "@button"
+msgid "Refresh List"
+msgstr "重新載入清單"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ObjectItemButton.qml:128
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "覆寫 %1 設定。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
+msgctxt "@button"
+msgid "Try again"
+msgstr "再試一次"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:34 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:477
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "列印參數"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Done"
+msgstr "完成"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:84 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "啟用"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
+msgctxt "@button"
+msgid "Sync"
+msgstr "同步"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
-msgstr "建立"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
+msgstr "同步中"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
+msgstr "未發現任何列印機資訊"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
+msgstr "您似乎沒有任何兼容的打印機連接至Digital Factory。請確保您的打印機已連接並且安裝最新的軟體."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
+msgstr "學習如何連結您的印表機至Digital Factory"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
+msgctxt "@button"
+msgid "Refresh"
+msgstr "重新載入"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr "透過USB同步您的線材設定檔"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
+msgstr "請依照下述步驟載入新的線材設定檔至印表機."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
+msgctxt "@text"
+msgid "Click the export material archive button."
+msgstr "請點擊輸出材料檔案按鈕."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
+msgctxt "@text"
+msgid "Save the .umm file on a USB stick."
+msgstr "將 .umm 的文件儲存至USB."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
+msgctxt "@text"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
+msgstr "插入USB至您的列印機，並啟動程式去載入新的線材設定檔."
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
+msgctxt "@button"
+msgid "How to load new material profiles to my printer"
+msgstr "如何載入新的線材設定檔至我的列印機"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "返回"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
+msgctxt "@button"
+msgid "Export material archive"
+msgstr "輸出線材設定存檔"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
+msgctxt "@title:window"
+msgid "Export All Materials"
+msgstr "匯出所有線材設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "複製"
+msgid "Materials compatible with active printer:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:152 /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "重命名"
+msgid "Create new"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:167 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
 msgctxt "@action:button"
 msgid "Import"
 msgstr "匯入"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:179 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
 msgctxt "@action:button"
-msgid "Export"
-msgstr "匯出"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "建立列印參數"
+msgid "Sync with Printers"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "請為此參數提供一個名字。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "複製"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:263
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "複製列印參數"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
+msgctxt "@action:button"
+msgid "Export"
+msgstr "匯出"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:277 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "移除確認"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:278 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "你確定要移除 %1 嗎？這動作無法復原！"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
 msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "重命名列印參數"
+msgid "Import Material"
+msgstr "匯入線材設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:307
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "匯入列印參數"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "成功匯入線材 <filename>%1</filename>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "無法匯入線材 <filename>%1</filename>：<message>%2</message>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
 msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "匯出列印參數"
+msgid "Export Material"
+msgstr "匯出線材設定"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "無法匯出線材至 <filename>%1</filename>：<message>%2</message>"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:399
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "印表機：%1"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "成功匯出線材至：<filename>%1</filename>"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
 msgctxt "@action:button"
+msgid "Update profile."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+msgctxt "@action:tooltip"
 msgid "Update profile with current settings/overrides"
-msgstr "使用目前設定 / 覆寫值更新列印參數"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "此列印參數使用印表機指定的預設值，因此在下面的清單中沒有此設定項。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "你目前的設定與選定的列印參數相匹配。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "全局設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:17 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:468
-msgctxt "@title:tab"
-msgid "General"
-msgstr "基本"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "建立列印參數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "請為此參數提供一個名字。"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "匯出列印參數"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "複製列印參數"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "重命名列印參數"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "匯入列印參數"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "介面"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:215
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+msgctxt "@heading"
+msgid "-- incomplete --"
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "貨幣："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:228
-msgctxt "@label"
-msgid "Theme:"
-msgstr "主題："
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:273
-msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "需重新啟動 Cura，新的設定才能生效。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
+msgid "Theme*:"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "當設定變更時自動進行切片。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "自動切片"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@label"
+msgid "*You will need to restart the application for these changes to have effect."
+msgstr ""
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "顯示區設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "模型缺少支撐的區域已以紅色標示。如果沒有支撐這些區域將無法正常列印。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "顯示突出部分"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:339
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "模型缺少或多餘的表面已用警告符號標示。工具路徑是將缺少部份補上的型狀。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "顯示模型錯誤"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:356
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "當模型被選中時，視角將自動調整到最合適的觀察位置（模型處於正中央）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:361
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "當專案被選中時，自動置中視角"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:371
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "需要讓 Cura 的預設縮放操作反轉嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:376
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "反轉視角縮放方向。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "是否跟隨滑鼠方向進行縮放？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:392
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "正交透視不支援游標縮放功能。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:397
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "跟隨滑鼠方向縮放"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:423
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "需要移動平台上的模型，使它們不再交錯嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "確保每個模型都保持分離"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:437
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "要將模型下降到碰觸列印平台嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "自動下降模型到列印平台"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "在 g-code 讀取器中顯示警告訊息。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:463
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "G-code 讀取器中的警告訊息"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "分層檢視要強制進入相容模式嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "強制分層檢視相容模式（需要重新啟動）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Cura 應該開啟在前次關閉時的位置嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "開啟時復原視窗位置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "使用哪種類型的攝影機渲染？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "攝影機渲染："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
 msgid "Perspective"
 msgstr "透視"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Orthographic"
 msgstr "正交"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "開啟並儲存檔案"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "從桌面或外部程式開啟檔案時，使用同一 Cura 視窗嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "使用同一 Cura 視窗"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr "需要再載入新模型前清空視窗內之列印平台嗎?"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr "載入新模型時清空視窗內之列印平台"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:592
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "當模型的尺寸過大時，是否將模型自動縮小至列印範圍嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:597
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "縮小過大模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "部份模型採用較大的單位(例如：公尺)，導致模型變得非常小，要將這些模型放大嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:612
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "放大過小模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:622
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "模型載入後要設為被選擇的狀態嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:627
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "模型載入後選擇模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:637
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "是否自動將印表機名稱作為列印作業名稱的前綴？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "將印表機名稱前綴添加到列印作業名稱中"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:652
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "儲存專案檔案時是否顯示摘要？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:656
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "儲存專案時顯示摘要對話框"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "開啟專案檔案時的預設行為"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:674
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "開啟專案檔案時的預設行為： "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:688
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "每次都向我確認"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "總是作為一個專案開啟"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "總是匯入模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:727
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "當你對列印參數進行更改然後切換到其他列印參數時，將顯示一個對話框詢問你是否要保留修改。你也可以選擇預設不顯示該對話框。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:741
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "當切換到另一組列印參數時，對於被修改過的設定的預設行為： "
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "總是放棄修改過的設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:757
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "總是將修改過的設定轉移至新的列印參數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:791
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
 msgctxt "@label"
 msgid "Privacy"
 msgstr "隱私權"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:797
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "你願意將關於你的列印資料以匿名形式發送到 Ultimaker 嗎？注意：我們不會記錄或發送任何模型、IP 位址或其他私人資料。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:802
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "（匿名）發送列印資訊"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:811
-msgctxt "@action:button"
-msgid "More information"
-msgstr "更多資訊"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:829
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
 msgctxt "@label"
 msgid "Updates"
 msgstr "更新"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:836
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "當 Cura 啟動時，是否自動檢查更新？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:841
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "啟動時檢查更新"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:852
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr "當檢查更新時，只檢查正式版本."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:857
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr "僅正式版本"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:868
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr "當檢查更新時，同時檢查正式版本與測試版本."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:873
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr "正式版本與測試版本發佈"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:884
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr "需要於開啟Cura時自動更新插件嗎? 建議您勿關閉此功能!"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/GeneralPage.qml:889
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr "設定插件更新提示"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "資訊"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "使用 IP 位址新增印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "直徑更改確認"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "輸入印表機的 IP 位址。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "新的線材直徑設定為 %1 mm，這與目前的擠出機不相容。你要繼續嗎？"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "新增"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Display Name"
-msgstr "顯示名稱"
+msgid "Could not connect to device."
+msgstr "無法連接到裝置。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Material Type"
-msgstr "線材類型"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "無法連接到 Ultimaker 印表機？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "Color"
-msgstr "顏色"
+msgid "The printer at this address has not responded yet."
+msgstr "此位址的印表機尚未回應。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Properties"
-msgstr "屬性"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "無法添加此印表機，因為它是未知的印表機，或者它不是印表機群組的主機。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "密度"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "連接"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Diameter"
-msgstr "直徑"
+msgid "Release Notes"
+msgstr "發佈通知"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "線材成本"
+msgid "User Agreement"
+msgstr "使用者授權"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "線材重量"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "同意"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "線材長度"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "拒絕並關閉"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "每公尺成本"
+msgid "What's New"
+msgstr "新功能"
+
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+msgctxt "@button"
+msgid "Next"
+msgstr "下一步"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "此線材與 %1 相關聯，並共享其部份屬性。"
+msgid "Add a Cloud printer"
+msgstr "新增雲端印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "解除聯結線材"
+msgid "Waiting for Cloud response"
+msgstr "等待雲端服務回應"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Description"
-msgstr "描述"
+msgid "No printers found in your account?"
+msgstr "在你的帳號未發現任何印表機？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "附著資訊"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "下列您帳號中的印表機已新增至 Cura："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "建立"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "手動新增印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "複製"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr "從市集中加入線材設定或插件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:199
-msgctxt "@action:button Sending materials to printers"
-msgid "Sync with Printers"
-msgstr "同步列印機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr "備份及同步您的線材設定與插件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:248
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr "分享創意並可從Ultimaker社群中超過48000的使用者得到幫助"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:329 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:337
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "匯入線材設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+msgctxt "@button"
+msgid "Skip"
+msgstr "略過"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:338
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "無法匯入線材 <filename>%1</filename>：<message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr "創建免費的Ultimaker帳戶"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:342
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "成功匯入線材 <filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "歡迎來到 Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:360 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:368
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "匯出線材設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr "請依照步驟安裝Ultimaker Cura. 這會需要幾分鐘的時間."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:372
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "無法匯出線材至 <filename>%1</filename>：<message>%2</message>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "開始"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:378
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "成功匯出線材至：<filename>%1</filename>"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "空的"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr "同步印表機線材設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "製造商"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:47
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr "同步印表機線材設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+msgctxt "@label"
+msgid "Profile author"
+msgstr "列印參數作者"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:53
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr "依照下述簡單的步驟。您將同步線材設定檔至您的印表機."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+msgctxt "@label"
+msgid "Printer name"
+msgstr "印表機名稱"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
-msgctxt "@button"
-msgid "Start"
-msgstr "開始"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "請為你的印表機取一個名稱"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:98
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr "為何我需要同步線材設定檔?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "新增印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:130
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr "登入"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "新增網路印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:137
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr "為了自動將線材設定檔與所有連接到 Digital Factory 的列印機同步，您必須先從Cura進行登入."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "新增非網路印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:165 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:611
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr "從USB進行同步線材設定檔"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "在你的網路上找不到印表機。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:200
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr "下述的印表機將新增新的線材設定檔:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "更新"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:207
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr "再發送線材設定檔至印表機時發生錯誤."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "使用 IP 位址新增印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:214
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr "線材設定檔成功同步至下述的印表機內:"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "新增雲端印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:256 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:444
-msgctxt "@button"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "故障排除"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:432
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
-msgstr "列印機資訊遺失了?"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "協助我們改進 Ultimaker Cura"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:434
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
 msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr "確認您的列印機已開機並連接至Digital Factory."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Refresh List"
-msgstr "重新載入清單"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:487
-msgctxt "@button"
-msgid "Try again"
-msgstr "再試一次"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:491 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Done"
-msgstr "完成"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura 搜集匿名資料以提高列印品質和使用者體驗，包含："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:493 /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:618
-msgctxt "@button"
-msgid "Sync"
-msgstr "同步"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "機器類型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:549
-msgctxt "@button"
-msgid "Syncing"
-msgstr "同步中"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "線材用法"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:566
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr "未發現任何列印機資訊"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "切片次數"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:582
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
 msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr "您似乎沒有任何兼容的打印機連接至Digital Factory。請確保您的打印機已連接並且安裝最新的軟體."
+msgid "Print settings"
+msgstr "列印設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:595
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr "學習如何連結您的印表機至Digital Factory"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura 收集的資料不包含任何個人資訊。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:625
-msgctxt "@button"
-msgid "Refresh"
-msgstr "重新載入"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "更多資訊"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:647
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr "透過USB同步您的線材設定檔"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "物件清單"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:654
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
-msgstr "請依照下述步驟載入新的線材設定檔至印表機."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr "做為支撐而列印。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:679
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr "請點擊輸出材料檔案按鈕."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr "與此模型重疊的其他模型已被更改。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:680
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr "將 .umm 的文件儲存至USB."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr "與此模型重疊的填充已被更改。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:681
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr "插入USB至您的列印機，並啟動程式去載入新的線材設定檔."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr "與此模型的重疊沒有支撐。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:692
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr "如何載入新的線材設定檔至我的列印機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "覆寫 %1 設定。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:716
-msgctxt "@button"
-msgid "Export material archive"
-msgstr "輸出線材設定存檔"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "已連線印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:753
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr "匯出所有線材設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "預設印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:16
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "參數顯示設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "雲端印表機為離線狀態。請檢查印表機是否已開機並連上網路。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:48
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "全選"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "此印表機未連接到你的帳號。請前往 Ultimaker Digital Factory 建立連接。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/MachinesPage.qml:16 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:473
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "雲端服務目前無法使用。請登入以連接到雲端印表機。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "已計算"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "雲端服務目前無法使用。請檢查你的網路連線。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "設定"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+msgctxt "@button"
+msgid "Add printer"
+msgstr "新增印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "列印參數"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "管理印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "目前"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "單位"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "無標題"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:119
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
 msgctxt "@label:MonitorStatus"
 msgid "Not connected to a printer"
 msgstr "未連接至印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:123
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
 msgctxt "@label:MonitorStatus"
 msgid "Printer does not accept commands"
 msgstr "印表機不接受命令"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
 msgctxt "@label:MonitorStatus"
 msgid "In maintenance. Please check the printer"
 msgstr "維護中。請檢查印表機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:144
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
 msgctxt "@label:MonitorStatus"
 msgid "Lost connection with the printer"
 msgstr "與印表機的連線中斷"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:146
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
 msgctxt "@label:MonitorStatus"
 msgid "Printing..."
 msgstr "列印中..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:149
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
 msgctxt "@label:MonitorStatus"
 msgid "Paused"
 msgstr "已暫停"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:152
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
 msgctxt "@label:MonitorStatus"
 msgid "Preparing..."
 msgstr "準備中..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:154
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
 msgctxt "@label:MonitorStatus"
 msgid "Please remove the print"
 msgstr "請取出列印件"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:326
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
 msgctxt "@label"
 msgid "Abort Print"
 msgstr "中斷列印"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/MonitorButton.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "你確定要中斷列印嗎？"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "用 %1 列印所選模型"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr "我的列印機"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr "從Ultimaker Digital Factory中監控我的列印機."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr "從 Digital Library中創建列印專案."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr "列印工作"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr "監控列印工作並於從您的歷史紀錄中再次列印."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr "使用插件及線材參數擴充Ultimaker Cura."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr "使用Ultimaker e-learning成為一位3D列印專家."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr "Ultimaker 支援"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"部份隱藏設定使用的值與一般計算所得的值不同。\n"
+"\n"
+"點擊以顯這些設定。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr "學習如何開始使用Ultimaker Cura."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "搜尋設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr "提出問題"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "將設定值複製到所有擠出機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr "諮詢Ultimaker社群."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "複製所有改變的設定值到所有擠出機"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr "回報Bug"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "隱藏此設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr "讓開發者了解您遇到的問題."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "不再顯示此設定"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr "參觀Ultimaker網站."
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "保持此設定顯示"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
-msgstr "印表機控制"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "參數顯示設定..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "輕搖位置"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "此設定未被使用，因為受它影響的設定都被覆寫了。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "影響"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
-msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "影響因素"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "輕搖距離"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "這個設定是所有擠出機共用的。修改它會同時更動到所有擠出機的值。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "傳送 G-code"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "傳送一個自訂的 G-code 命令到連接中的印表機。按下 Enter 鍵傳送命令。"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "此設定是透過解決擠出機設定值衝突獲得："
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
 msgctxt "@label"
-msgid "Extruder"
-msgstr "擠出機"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "加熱頭的目標溫度。加熱頭將加熱或冷卻至此溫度。若設定為 0，則關閉加熱頭的加熱。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "此加熱頭的目前溫度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "加熱頭預熱溫度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "取消"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "預熱"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "列印前預先加熱。你可以在加熱時繼續調整你的列印，當你準備好列印時就不需等待加熱頭升溫。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "該擠出機中線材的顏色。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "該擠出機中的線材。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "該擠出機所使用的噴頭。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "尚未連線到印表機。"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"此設定的值與列印參數不同。\n"
+"\n"
+"單擊以復原列印參數的值。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Build plate"
-msgstr "列印平台"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "熱床的目標溫度。熱床將加熱或冷卻至此溫度。若設定為 0，則不使用熱床。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "熱床目前溫度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "熱床的預熱溫度。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "列印前請預熱熱床。你可以在熱床加熱時繼續調整相關物件，讓你在準備列印時不必等待熱床加熱完畢。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "登入"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:42
-msgctxt "@text"
 msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
-"- 從市集中加入線材參數及插件\n"
-"-備份及同步您的線材設定與插件 \n"
-"- 分享創意並可從Ultimaker社群中超過48000的使用者得到幫助"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/GeneralOperations.qml:62
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
-msgstr "創建免費的Ultimaker帳戶"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:82
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "最後一次更新：%1"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:110
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker 帳號"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/UserOperations.qml:126
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "登出"
+"這個設定通常由計算得出，可是它目前被設定為一個數值。\n"
+"\n"
+"點擊以恢復計算得出的數值。"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:28
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
 msgctxt "@label"
-msgid "Checking..."
-msgstr "檢查中..."
+msgid "Hex"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:35
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Account synced"
-msgstr "帳號已同步"
+msgid "Active print"
+msgstr "正在列印"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:42
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "出了些問題..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "安裝待處理的更新"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "檢查帳號更新"
+msgid "Job Name"
+msgstr "作業名稱"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "無標題"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "列印時間"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
 msgctxt "@label"
-msgid "No items to select from"
-msgstr "沒有可選取的專案"
+msgid "Estimated time left"
+msgstr "預計剩餘時間"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:83
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "顯示線上故障排除指南"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:90
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "切換全螢幕"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:98
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
 msgid "Exit Full Screen"
 msgstr "離開全螢幕"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:105
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "復原（&U）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:115
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "取消復原（&R）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:133
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "退出（&Q）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:141
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "立體圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:148
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "前視圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:155
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "上視圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:162
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
 msgid "Bottom View"
 msgstr "下視圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:169
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr "左視圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:176
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr "右視圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:190
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "設定 Cura..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:197
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "新增印表機（&A）..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:203
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "管理印表機（&I）..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:210
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "管理線材..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:218
-msgctxt "@action:inmenu"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
 msgid "Add more materials from Marketplace"
-msgstr "從市集增加更多線材"
+msgstr ""
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:225
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "使用目前設定 / 覆寫更新列印參數（&U）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:233
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "捨棄目前更改（&D）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:245
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "從目前設定 / 覆寫值建立列印參數（&C）..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:251
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "管理列印參數.."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:259
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "顯示線上說明文件（&D）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:267
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "BUG 回報（&B）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:275
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr "新功能"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:289
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "關於..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:296
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected"
 msgstr "刪除選取"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:306
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected"
 msgstr "置中選取"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:315
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected"
 msgstr "複製選取"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:324
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "刪除模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:332
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "將模型置中（&N）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:338
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "群組模型（&G）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:358
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "取消模型群組"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:368
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "結合模型（&M）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:378
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "複製模型...（&M）"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:385
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "選擇所有模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:395
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "清空列印平台"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:405
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "重新載入所有模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:414
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "將所有模型排列到所有列印平台上"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:421
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "排列所有模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:429
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "排列所選模型"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:436
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "重置所有模型位置"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:443
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "重置所有模型旋轉"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:452
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "開啟檔案（&O）..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:462
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "新建專案（&N）..."
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:469
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "顯示設定資料夾"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:476 /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:535
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "參數顯示設定..."
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Actions.qml:483
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "市集（&M）"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "此設定未被使用，因為受它影響的設定都被覆寫了。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "影響"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "影響因素"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:188
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "這個設定是所有擠出機共用的。修改它會同時更動到所有擠出機的值。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:192
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "此設定是透過解決擠出機設定值衝突獲得："
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:232
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"此設定的值與列印參數不同。\n"
-"\n"
-"單擊以復原列印參數的值。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingItem.qml:332
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"這個設定通常由計算得出，可是它目前被設定為一個數值。\n"
-"\n"
-"點擊以恢復計算得出的數值。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:51
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "搜尋設定"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:453
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "將設定值複製到所有擠出機"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:462
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "複製所有改變的設定值到所有擠出機"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:499
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "隱藏此設定"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:512
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "不再顯示此設定"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingView.qml:516
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "保持此設定顯示"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Settings/SettingCategory.qml:203
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"部份隱藏設定使用的值與一般計算所得的值不同。\n"
-"\n"
-"點擊以顯這些設定。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:257
-msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "此套件將在重新啟動後安裝。"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:471
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "設定"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:594
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "關閉 %1 中"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:595 /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:607
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "是否確定要離開 %1 ？"
-
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:755
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "安裝套件"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "立體圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:763
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "開啟檔案"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "前視圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:766
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "我們已經在你選擇的檔案中找到一個或多個 G-Code 檔案。你一次只能開啟一個 G-Code 檔案。若需開啟 G-Code 檔案，請僅選擇一個。"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "上視圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:875
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "新增印表機"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "左視圖"
 
-#: /home/clamboo/Desktop/Cura/resources/qml/Cura.qml:883
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "新功能"
+#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "右視圖"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "提供對每個模型的單獨設定。"
+msgid "Provides a prepare stage in Cura."
+msgstr "在 cura 提供一個準備介面。"
 
-#: PerObjectSettingsTool/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "單一模型設定工具"
+msgid "Prepare Stage"
+msgstr "準備介面"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "提供匯入 Cura 列印參數的支援。"
+msgid "Provides support for exporting Cura profiles."
+msgstr "提供匯出 Cura 列印參數的支援。"
 
-#: CuraProfileReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura 列印參數讀取器"
+msgid "Cura Profile Writer"
+msgstr "Cura 列印參數寫入器"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "提供讀取 X3D 檔案的支援。"
+msgid "Provides support for reading model files."
+msgstr "提供讀取模型檔案的支援。"
 
-#: X3DReader/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D 讀取器"
+msgid "Trimesh Reader"
+msgstr "Trimesh 讀取器"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "備份和復原你的設定。"
+msgid "Checks for firmware updates."
+msgstr "檢查是否有韌體更新。"
 
-#: CuraDrive/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura 備份"
+msgid "Firmware Update Checker"
+msgstr "韌體更新檢查"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "提供更改機器設定的方法（如列印範圍，噴頭大小等）。"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "記錄某些事件以便在錯誤報告中使用"
 
-#: MachineSettingsAction/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "印表機設定操作"
+msgid "Sentry Logger"
+msgstr "哨兵記錄器"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "建立一個抹除器網格放在某些地方用來防止列印支撐"
+msgid "Provides a monitor stage in Cura."
+msgstr "在 cura 提供一個監控介面。"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "支援抹除器"
+msgid "Monitor Stage"
+msgstr "監控介面"
 
 #: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
@@ -5805,105 +5970,105 @@ msgctxt "name"
 msgid "Removable Drive Output Device Plugin"
 msgstr "行動裝置輸出設備外掛"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "提供升級韌體用的機器操作。"
+msgid "Provides support for reading AMF files."
+msgstr "提供對讀取 AMF 格式檔案的支援。"
 
-#: FirmwareUpdater/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "韌體更新器"
+msgid "AMF Reader"
+msgstr "AMF 讀取器"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "提供匯入 Cura 舊版本列印參數的支援。"
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "提供讀取 Ultimaker 格式封包的支援。"
 
-#: LegacyProfileReader/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "舊版 Cura 列印參數讀取器"
+msgid "UFP Reader"
+msgstr "UFP 讀取器"
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "提供讀取 3MF 格式檔案的支援。"
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr "連結至\"數位博物館\"，允許Cura從\"數位博物館\"打開或保存文件."
 
-#: 3MFReader/plugin.json
+#: DigitalLibrary/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF 讀取器"
+msgid "Ultimaker Digital Library"
+msgstr "Ultimaker 數位博物館"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "提供寫入 Ultimaker 格式封包的支援。"
+msgid "Provides the Per Model Settings."
+msgstr "提供對每個模型的單獨設定。"
 
-#: UFPWriter/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP 寫入器"
+msgid "Per Model Settings Tool"
+msgstr "單一模型設定工具"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "記錄某些事件以便在錯誤報告中使用"
+msgid "Provides a machine actions for updating firmware."
+msgstr "提供升級韌體用的機器操作。"
 
-#: SentryLogger/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "哨兵記錄器"
+msgid "Firmware Updater"
+msgstr "韌體更新器"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "提供匯入 G-code 檔案中列印參數的支援。"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "管理與 Ultimaker 網絡印表機的網絡連線。"
 
-#: GCodeProfileReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code 列印參數讀取器"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker 網絡連線"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "在 Cura 提供一個預覽介面。"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "檢查模型和列印設定以了解可能發生的問題並給出建議。"
 
-#: PreviewStage/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "預覽介面"
+msgid "Model Checker"
+msgstr "模器檢查器"
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "提供透視檢視。"
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: XRayView/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "透視檢視"
+msgid "Simulation View"
+msgstr "模擬檢視"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "提供連結到 Cura 切片引擎後台。"
+msgid "Writes g-code to a file."
+msgstr "將 G-code 寫入檔案。"
 
-#: CuraEngineBackend/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Cura 引擎後台"
+msgid "G-code Writer"
+msgstr "G-code 寫入器"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "提供對讀取 AMF 格式檔案的支援。"
+msgid "Provides support for writing 3MF files."
+msgstr "提供寫入 3MF 檔案的支援。"
 
-#: AMFReader/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF 讀取器"
+msgid "3MF Writer"
+msgstr "3MF 寫入器"
 
 #: GCodeGzReader/plugin.json
 msgctxt "description"
@@ -5915,175 +6080,175 @@ msgctxt "name"
 msgid "Compressed G-code Reader"
 msgstr "壓縮檔案 G-code 讀取器"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "擴充程式（允許用戶建立腳本進行後處理）"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "提供讀寫 XML 格式線材參數的功能。"
 
-#: PostProcessingPlugin/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "後處理"
+msgid "Material Profiles"
+msgstr "線材參數"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "提供匯出 Cura 列印參數的支援。"
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "提供連結到 Cura 切片引擎後台。"
 
-#: CuraProfileWriter/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura 列印參數寫入器"
+msgid "CuraEngine Backend"
+msgstr "Cura 引擎後台"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "接受 G-Code 並且傳送到印表機。此外掛也可以更新韌體。"
+msgid "Provides support for reading X3D files."
+msgstr "提供讀取 X3D 檔案的支援。"
 
-#: USBPrinting/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB 連線列印"
+msgid "X3D Reader"
+msgstr "X3D 讀取器"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "在 cura 提供一個準備介面。"
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "支援從 2D 圖片檔案產生可列印 3D 模型的能力。"
 
-#: PrepareStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "準備介面"
+msgid "Image Reader"
+msgstr "圖片讀取器"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "允許載入和顯示 G-code 檔案。"
+msgid "Provides support for reading 3MF files."
+msgstr "提供讀取 3MF 格式檔案的支援。"
 
-#: GCodeReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code 讀取器"
+msgid "3MF Reader"
+msgstr "3MF 讀取器"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "支援從 2D 圖片檔案產生可列印 3D 模型的能力。"
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "提供寫入 Ultimaker 格式封包的支援。"
 
-#: ImageReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "圖片讀取器"
+msgid "UFP Writer"
+msgstr "UFP 寫入器"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "提供 Ultimaker 機器的操作（例如平台調平精靈，選擇升級等）。"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "提供匯入 Cura 舊版本列印參數的支援。"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker 印表機操作"
+msgid "Legacy Cura Profile Reader"
+msgstr "舊版 Cura 列印參數讀取器"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "將 G-code 寫入壓縮檔案。"
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "將設定從 Cura 4.3 版本升級至 4.4 版本。"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "壓縮檔案 G-code 寫入器"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "升級版本 4.3 到 4.4"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "檢查是否有韌體更新。"
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "將設定從 Cura 2.1 版本升級至 2.2 版本。"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "韌體更新檢查"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "升級版本 2.1 到 2.2"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "提交匿名切片資訊。這項功能可以在偏好設定中關閉。"
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "將設定從 Cura 4.1 版本升級至 4.2 版本。"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "切片資訊"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "升級版本 4.1 到 4.2"
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "提供讀寫 XML 格式線材參數的功能。"
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "線材參數"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr "連結至\"數位博物館\"，允許Cura從\"數位博物館\"打開或保存文件."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "將設定從 Cura 4.5 版本升級至 4.6 版本。"
 
-#: DigitalLibrary/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr "Ultimaker 數位博物館"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "升級版本 4.5 到 4.6"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "查詢，管理和安裝新的 Cura 套件。"
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "將設定從 Cura 3.3 版本升級至 3.4 版本。"
 
-#: Toolbox/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "工具箱"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "升級版本 3.3 到 3.4"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "將 G-code 寫入檔案。"
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr "將設定從 Cura 4.8 版本升級至 4.9 版本。"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code 寫入器"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr "升級版本 4.8 到 4.9"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "提供模擬檢視。"
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "將設定從 Cura 2.7 版本升級至 3.0 版本。"
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "模擬檢視"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "升級版本 2.7 到 3.0"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "將設定從 Cura 4.5 版本升級至 4.6 版本。"
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "將設定從 Cura 4.4 版本升級至 4.5 版本。"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "升級版本 4.5 到 4.6"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "升級版本 4.4 到 4.5"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "將設定從 Cura 2.5 版本升級至 2.6 版本。"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "將設定從 Cura 3.0 版本升級至 3.1 版本。"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "升級版本 2.5 到 2.6"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "升級版本 3.0 到 3.1"
 
 #: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
@@ -6095,115 +6260,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr "升級版本 4.6.0 到 4.6.2"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "將設定從 Cura 4.7 版本升級至 4.8 版本。"
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "將設定從 Cura 2.6 版本升級至 2.7 版本。"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "升級版本 4.7 到 4.8"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "升級版本 2.6 到 2.7"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "將設定從 Cura 3.4 版本升級至 3.5 版本。"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "將設定從 Cura 4.2 版本升級至 4.3 版本。"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "升級版本 3.4 到 3.5"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "升級版本 4.2 到 4.3"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "將設定從 Cura 2.1 版本升級至 2.2 版本。"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "將設定從 Cura 4.0 版本升級至 4.1 版本。"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "升級版本 2.1 到 2.2"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "升級版本 4.0 到 4.1"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "將設定從 Cura 3.2 版本升級至 3.3 版本。"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "將設定從 Cura 4.6.2 版本升級至 4.7 版本。"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "升級版本 3.2 到 3.3"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "升級版本 4.6.2 到 4.7"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr "將設定從 Cura 4.8 版本升級至 4.9 版本。"
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr "將設定從 Cura 4.9 版本升級至 4.10 版本。"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr "升級版本 4.8 到 4.9"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr "升級版本 4.9 到 4.10"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "將設定從 Cura 4.6.2 版本升級至 4.7 版本。"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "將設定從 Cura 2.2 版本升級至 2.4 版本。"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "升級版本 4.6.2 到 4.7"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "升級版本 2.2 到 2.4"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "將設定從 Cura 4.2 版本升級至 4.3 版本。"
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "將設定從 Cura 3.2 版本升級至 3.3 版本。"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "升級版本 4.2 到 4.3"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "升級版本 3.2 到 3.3"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "將設定從 Cura 4.3 版本升級至 4.4 版本。"
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "將設定從 Cura 2.5 版本升級至 2.6 版本。"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "升級版本 4.3 到 4.4"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "升級版本 2.5 到 2.6"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr "將設定從 Cura 4.9 版本升級至 4.10 版本。"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "將設定從 Cura 3.5 版本升級至 4.0 版本。"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr "升級版本 4.9 到 4.10"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "升級版本 3.5 到 4.0"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "將設定從 Cura 2.7 版本升級至 3.0 版本。"
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "將設定從 Cura 3.4 版本升級至 3.5 版本。"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "升級版本 2.7 到 3.0"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "升級版本 3.4 到 3.5"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "將設定從 Cura 2.6 版本升級至 2.7 版本。"
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "將設定從 Cura 4.7 版本升級至 4.8 版本。"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "升級版本 2.6 到 2.7"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "升級版本 4.7 到 4.8"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6215,105 +6380,115 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr "升級版本 4.11 到 4.12"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "將設定從 Cura 3.3 版本升級至 3.4 版本。"
+msgid "Backup and restore your configuration."
+msgstr "備份和復原你的設定。"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "升級版本 3.3 到 3.4"
+msgid "Cura Backups"
+msgstr "Cura 備份"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "將設定從 Cura 3.0 版本升級至 3.1 版本。"
+msgid "Provides support for importing Cura profiles."
+msgstr "提供匯入 Cura 列印參數的支援。"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "升級版本 3.0 到 3.1"
+msgid "Cura Profile Reader"
+msgstr "Cura 列印參數讀取器"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "將設定從 Cura 4.0 版本升級至 4.1 版本。"
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "提交匿名切片資訊。這項功能可以在偏好設定中關閉。"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "升級版本 4.0 到 4.1"
+msgid "Slice info"
+msgstr "切片資訊"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "將設定從 Cura 4.4 版本升級至 4.5 版本。"
+msgid "Provides support for importing profiles from g-code files."
+msgstr "提供匯入 G-code 檔案中列印參數的支援。"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "升級版本 4.4 到 4.5"
+msgid "G-code Profile Reader"
+msgstr "G-code 列印參數讀取器"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "將設定從 Cura 2.2 版本升級至 2.4 版本。"
+msgid "Writes g-code to a compressed archive."
+msgstr "將 G-code 寫入壓縮檔案。"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "升級版本 2.2 到 2.4"
+msgid "Compressed G-code Writer"
+msgstr "壓縮檔案 G-code 寫入器"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "將設定從 Cura 4.1 版本升級至 4.2 版本。"
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "擴充程式（允許用戶建立腳本進行後處理）"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "升級版本 4.1 到 4.2"
+msgid "Post Processing"
+msgstr "後處理"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "將設定從 Cura 3.5 版本升級至 4.0 版本。"
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "建立一個抹除器網格放在某些地方用來防止列印支撐"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "升級版本 3.5 到 4.0"
+msgid "Support Eraser"
+msgstr "支援抹除器"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "管理與 Ultimaker 網絡印表機的網絡連線。"
+msgid "Provides a preview stage in Cura."
+msgstr "在 Cura 提供一個預覽介面。"
 
-#: UM3NetworkPrinting/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker 網絡連線"
+msgid "Preview Stage"
+msgstr "預覽介面"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "提供讀取模型檔案的支援。"
+msgid "Provides the X-Ray view."
+msgstr "提供透視檢視。"
 
-#: TrimeshReader/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh 讀取器"
+msgid "X-Ray View"
+msgstr "透視檢視"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "提供讀取 Ultimaker 格式封包的支援。"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "提供 Ultimaker 機器的操作（例如平台調平精靈，選擇升級等）。"
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP 讀取器"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker 印表機操作"
+
+#: Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
+
+#: Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
 
 #: SolidView/plugin.json
 msgctxt "description"
@@ -6325,35 +6500,393 @@ msgctxt "name"
 msgid "Solid View"
 msgstr "實體檢視"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "提供寫入 3MF 檔案的支援。"
+msgid "Allows loading and displaying G-code files."
+msgstr "允許載入和顯示 G-code 檔案。"
 
-#: 3MFWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF 寫入器"
+msgid "G-code Reader"
+msgstr "G-code 讀取器"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "在 cura 提供一個監控介面。"
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "提供更改機器設定的方法（如列印範圍，噴頭大小等）。"
 
-#: MonitorStage/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "監控介面"
+msgid "Machine Settings Action"
+msgstr "印表機設定操作"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "檢查模型和列印設定以了解可能發生的問題並給出建議。"
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "接受 G-Code 並且傳送到印表機。此外掛也可以更新韌體。"
 
-#: ModelChecker/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "模器檢查器"
+msgid "USB printing"
+msgstr "USB 連線列印"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync materials with printers"
+#~ msgstr "列印機同步線材資料"
+
+#~ msgctxt "@info:generic"
+#~ msgid "You need to quit and restart {} before changes have effect."
+#~ msgstr "你需要結束並重新啟動 {} ，更動才能生效。"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Syncing..."
+#~ msgstr "同步中..."
+
+#~ msgctxt "@info:title"
+#~ msgid "Changes detected from your Ultimaker account"
+#~ msgstr "從你的 Ultimaker 帳號偵測到資料更動"
+
+#~ msgctxt "@info:generic"
+#~ msgid "Do you want to sync material and software packages with your account?"
+#~ msgstr "你要使用你的帳號同步線材資料和軟體套件嗎？"
+
+#~ msgctxt "@action:button"
+#~ msgid "Sync"
+#~ msgstr "同步"
+
+#~ msgctxt "@button"
+#~ msgid "Decline and remove from account"
+#~ msgstr "拒絕並從帳號中刪除"
+
+#~ msgctxt "@info:generic"
+#~ msgid "{} plugins failed to download"
+#~ msgstr "下載外掛 {} 失敗"
+
+#~ msgctxt "@title:window"
+#~ msgid "Plugin License Agreement"
+#~ msgstr "外掛授權協議"
+
+#~ msgctxt "@title:window"
+#~ msgid "Convert Image..."
+#~ msgstr "轉換圖片..."
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "The width in millimeters on the build plate."
+#~ msgstr "列印平台寬度，以毫米為單位。"
+
+#~ msgctxt "@title"
+#~ msgid "Marketplace"
+#~ msgstr "市集"
+
+#~ msgctxt "@info"
+#~ msgid "You will need to restart Cura before changes in packages have effect."
+#~ msgstr "需重新啟動 Cura，套件的更動才能生效。"
+
+#~ msgctxt "@action:button"
+#~ msgid "Install"
+#~ msgstr "安裝"
+
+#~ msgctxt "@action:button"
+#~ msgid "Installed"
+#~ msgstr "已安裝"
+
+#~ msgctxt "@label"
+#~ msgid "Premium"
+#~ msgstr "付費會員"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Go to Web Marketplace"
+#~ msgstr "前往網路市集"
+
+#~ msgctxt "@label"
+#~ msgid "Search materials"
+#~ msgstr "搜尋線材"
+
+#~ msgctxt "@label"
+#~ msgid "Compatibility"
+#~ msgstr "相容性"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Machine"
+#~ msgstr "機器"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Build Plate"
+#~ msgstr "列印平台"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Support"
+#~ msgstr "支撐"
+
+#~ msgctxt "@label:table_header"
+#~ msgid "Quality"
+#~ msgstr "品質"
+
+#~ msgctxt "@action:label"
+#~ msgid "Technical Data Sheet"
+#~ msgstr "技術資料表"
+
+#~ msgctxt "@action:label"
+#~ msgid "Safety Data Sheet"
+#~ msgstr "安全資料表"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printing Guidelines"
+#~ msgstr "列印指南"
+
+#~ msgctxt "@action:label"
+#~ msgid "Website"
+#~ msgstr "網站"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to install or update"
+#~ msgstr "需要<a href='%1'>登入</a>才能進行安裝或升級"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Buy material spools</a>"
+#~ msgstr "<a href='%1'>購買線材線軸</a>"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update"
+#~ msgstr "更新"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updating"
+#~ msgstr "更新中"
+
+#~ msgctxt "@action:button"
+#~ msgid "Updated"
+#~ msgstr "更新完成"
+
+#~ msgctxt "@action:button"
+#~ msgid "Back"
+#~ msgstr "返回"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Plugins"
+#~ msgstr "外掛"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed"
+#~ msgstr "已安裝"
+
+#~ msgctxt "@label"
+#~ msgid "Will install upon restarting"
+#~ msgstr "將在重新啟動時安裝"
+
+#~ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+#~ msgid "<a href='%1'>Log in</a> is required to update"
+#~ msgstr "需要<a href='%1'>登入</a>才能進行升級"
+
+#~ msgctxt "@action:button"
+#~ msgid "Downgrade"
+#~ msgstr "降級版本"
+
+#~ msgctxt "@action:button"
+#~ msgid "Uninstall"
+#~ msgstr "移除"
+
+#~ msgctxt "@label"
+#~ msgid "Community Contributions"
+#~ msgstr "社群貢獻"
+
+#~ msgctxt "@label"
+#~ msgid "Community Plugins"
+#~ msgstr "社群外掛"
+
+#~ msgctxt "@label"
+#~ msgid "Generic Materials"
+#~ msgstr "通用線材"
+
+#~ msgctxt "@info"
+#~ msgid "Fetching packages..."
+#~ msgstr "取得套件..."
+
+#~ msgctxt "@label"
+#~ msgid "Website"
+#~ msgstr "網站"
+
+#~ msgctxt "@label"
+#~ msgid "Email"
+#~ msgstr "電子郵件"
+
+#~ msgctxt "@description"
+#~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#~ msgstr "請登入以取得 Ultimaker Cura Enterprise 驗証的外掛及線材"
+
+#~ msgctxt "@label"
+#~ msgid "Version"
+#~ msgstr "版本"
+
+#~ msgctxt "@label"
+#~ msgid "Last updated"
+#~ msgstr "最後更新時間"
+
+#~ msgctxt "@label"
+#~ msgid "Downloads"
+#~ msgstr "下載"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed plugins"
+#~ msgstr "已安裝外掛"
+
+#~ msgctxt "@info"
+#~ msgid "No plugin has been installed."
+#~ msgstr "尚未安裝任何外掛。"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Installed materials"
+#~ msgstr "已安裝線材"
+
+#~ msgctxt "@info"
+#~ msgid "No material has been installed."
+#~ msgstr "尚未安裝任何線材。"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled plugins"
+#~ msgstr "捆綁式外掛"
+
+#~ msgctxt "@title:tab"
+#~ msgid "Bundled materials"
+#~ msgstr "捆綁式線材"
+
+#~ msgctxt "@info"
+#~ msgid "Could not connect to the Cura Package database. Please check your connection."
+#~ msgstr "無法連上 Cura 套件資料庫。請檢查你的網路連線。"
+
+#~ msgctxt "@label"
+#~ msgid "You need to accept the license to install the package"
+#~ msgstr "你必需同意授權協議才能安裝套件"
+
+#~ msgctxt "@title"
+#~ msgid "Changes from your account"
+#~ msgstr "你帳戶的更動"
+
+#~ msgctxt "@button"
+#~ msgid "Dismiss"
+#~ msgstr "捨棄"
+
+#~ msgctxt "@label"
+#~ msgid "The following packages will be added:"
+#~ msgstr "將新增下列套件："
+
+#~ msgctxt "@label"
+#~ msgid "The following packages can not be installed because of an incompatible Cura version:"
+#~ msgstr "下列套件因 Cura 版本不相容，無法安裝："
+
+#~ msgctxt "@title:window"
+#~ msgid "Confirm uninstall"
+#~ msgstr "移除確認"
+
+#~ msgctxt "@text:window"
+#~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#~ msgstr "你正在移除仍被使用的線材/列印設定。確認後會將下列耗材/列印設定重設為預設值。"
+
+#~ msgctxt "@text:window"
+#~ msgid "Materials"
+#~ msgstr "線材"
+
+#~ msgctxt "@text:window"
+#~ msgid "Profiles"
+#~ msgstr "參數"
+
+#~ msgctxt "@action:button"
+#~ msgid "Confirm"
+#~ msgstr "確定"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#~ msgstr "此列印可能會有些問題。點擊查看調整提示。"
+
+#~ msgctxt "@label"
+#~ msgid "Support library for handling planar objects"
+#~ msgstr "用於處理平面物件的函式庫"
+
+#~ msgctxt "@text:window, %1 is a profile name"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to Keep these changed settings after switching profiles?\n"
+#~ "Alternatively, you can discard the changes to load the defaults from '%1'."
+#~ msgstr ""
+#~ "你修改了一些參數設定。\n"
+#~ "你要在切換參數後保留這些更動嗎？\n"
+#~ "或者你也可以忽略這些更動，從 '%1' 載入預設值。"
+
+#~ msgctxt "@action:inmenu menubar:view"
+#~ msgid "&Build plate"
+#~ msgstr "列印平台（&B）"
+
+#~ msgctxt "@label"
+#~ msgid "Create"
+#~ msgstr "建立"
+
+#~ msgctxt "@label"
+#~ msgid "Duplicate"
+#~ msgstr "複製"
+
+#~ msgctxt "@label %1 is printer name"
+#~ msgid "Printer: %1"
+#~ msgstr "印表機：%1"
+
+#~ msgctxt "@action:button"
+#~ msgid "Update profile with current settings/overrides"
+#~ msgstr "使用目前設定 / 覆寫值更新列印參數"
+
+#~ msgctxt "@label"
+#~ msgid "Theme:"
+#~ msgstr "主題："
+
+#~ msgctxt "@label"
+#~ msgid "You will need to restart the application for these changes to have effect."
+#~ msgstr "需重新啟動 Cura，新的設定才能生效。"
+
+#~ msgctxt "@action:button"
+#~ msgid "More information"
+#~ msgstr "更多資訊"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create"
+#~ msgstr "建立"
+
+#~ msgctxt "@action:button Sending materials to printers"
+#~ msgid "Sync with Printers"
+#~ msgstr "同步列印機"
+
+#~ msgctxt "@action:label"
+#~ msgid "Printer"
+#~ msgstr "印表機"
+
+#~ msgctxt "@title:column"
+#~ msgid "Unit"
+#~ msgstr "單位"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Show Online Troubleshooting Guide"
+#~ msgstr "顯示線上故障排除指南"
+
+#~ msgctxt "@action:inmenu"
+#~ msgid "Add more materials from Marketplace"
+#~ msgstr "從市集增加更多線材"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Arrange All Models To All Build Plates"
+#~ msgstr "將所有模型排列到所有列印平台上"
+
+#~ msgctxt "@action:menu"
+#~ msgid "&Marketplace"
+#~ msgstr "市集（&M）"
+
+#~ msgctxt "description"
+#~ msgid "Find, manage and install new Cura packages."
+#~ msgstr "查詢，管理和安裝新的 Cura 套件。"
+
+#~ msgctxt "name"
+#~ msgid "Toolbox"
+#~ msgstr "工具箱"
+
+#~ msgctxt "description"
+#~ msgid "Provides the Simulation view."
+#~ msgstr "提供模擬檢視。"
 
 #~ msgctxt "@info:status"
 #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
diff --git a/resources/i18n/zh_TW/fdmextruder.def.json.po b/resources/i18n/zh_TW/fdmextruder.def.json.po
index 5420f8be93..db635de304 100644
--- a/resources/i18n/zh_TW/fdmextruder.def.json.po
+++ b/resources/i18n/zh_TW/fdmextruder.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 12:00+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2022-01-02 19:59+0800\n"
 "Last-Translator: Valen Chang  <carf17771@gmail.com>\n"
 "Language-Team: Valen Chang <carf17771@gmail.com>\n"
diff --git a/resources/i18n/zh_TW/fdmprinter.def.json.po b/resources/i18n/zh_TW/fdmprinter.def.json.po
index 84af9c3b86..11812837d3 100644
--- a/resources/i18n/zh_TW/fdmprinter.def.json.po
+++ b/resources/i18n/zh_TW/fdmprinter.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2021-12-10 11:59+0000\n"
+"POT-Creation-Date: 2022-04-13 10:49+0000\n"
 "PO-Revision-Date: 2022-01-02 20:24+0800\n"
 "Last-Translator: Valen Chang  <carf17771@gmail.com>\n"
 "Language-Team: Valen Chang <carf17771@gmail.com>\n"
@@ -467,8 +467,8 @@ msgstr "機器頭和風扇多邊形"
 
 #: fdmprinter.def.json
 msgctxt "machine_head_with_fans_polygon description"
-msgid "A 2D silhouette of the print head (fan caps included)."
-msgstr "列印頭 2D 輪廓圖（包含風扇蓋）。"
+msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "gantry_height label"
@@ -741,6 +741,16 @@ msgid "The diameter of the wheel that drives the material in the feeder."
 msgstr "帶動進料器中線材的輪子的直徑。"
 
 #: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one label"
+msgid "Scale Fan Speed To 0-1"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_scale_fan_speed_zero_to_one description"
+msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "resolution label"
 msgid "Quality"
 msgstr "品質"
@@ -961,6 +971,56 @@ msgid "The number of walls. When calculated by the wall thickness, this value is
 msgstr "牆壁的線條圈數，如果由壁厚計算，會四捨五入為一個整數值。"
 
 #: fdmprinter.def.json
+msgctxt "wall_transition_length label"
+msgid "Wall Transition Length"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_length description"
+msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count label"
+msgid "Wall Distribution Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_distribution_count description"
+msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle label"
+msgid "Wall Transitioning Threshold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_angle description"
+msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance label"
+msgid "Wall Transitioning Filter Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_distance description"
+msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation label"
+msgid "Wall Transitioning Filter Margin"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_transition_filter_deviation description"
+msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_wipe_dist label"
 msgid "Outer Wall Wipe Distance"
 msgstr "外壁擦拭噴頭長度"
@@ -991,14 +1051,24 @@ msgid "Optimize the order in which walls are printed so as to reduce the number
 msgstr "最佳化列印牆壁的順序，以減少縮回次數和行進距離。啟用此功能對大多數的零件是有益的，但有些零件可能反而會更花時間，因此請比較列印時間的估計值評估是否進行最佳化。當列印平台附著類型設定為邊緣時，第一層不會進行最佳化。"
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first label"
-msgid "Outer Before Inner Walls"
-msgstr "先印外壁後印內壁"
+msgctxt "inset_direction label"
+msgid "Wall Ordering"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction description"
+msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "inset_direction option inside_out"
+msgid "Inside To Outside"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "outer_inset_first description"
-msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
-msgstr "啟用時以從外向內的順序列印牆壁。當使用高黏度塑料如 ABS 時，這有助於提高 X 和 Y 的尺寸精度；但是，它可能會降低表面列印品質，尤其是在突出部分。"
+msgctxt "inset_direction option outside_in"
+msgid "Outside To Inside"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter label"
@@ -1011,94 +1081,84 @@ msgid "Prints an extra wall at every other layer. This way infill gets caught be
 msgstr "每兩層建立一個額外牆壁，這些額外的牆壁能更緊密地抓填充部分，產生較強壯的模型。"
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled label"
-msgid "Compensate Wall Overlaps"
-msgstr "補償牆壁重疊"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_enabled description"
-msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
-msgstr "彌補牆壁重疊部分的流量。"
-
-#: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled label"
-msgid "Compensate Outer Wall Overlaps"
-msgstr "補償外壁重疊"
+msgctxt "min_wall_line_width label"
+msgid "Minimum Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_0_enabled description"
-msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
-msgstr "列印外壁時如果該位置已經有牆壁存在，所進行的的流量補償。"
+msgctxt "min_wall_line_width description"
+msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled label"
-msgid "Compensate Inner Wall Overlaps"
-msgstr "補償內壁重疊"
+msgctxt "min_even_wall_line_width label"
+msgid "Minimum Even Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "travel_compensate_overlapping_walls_x_enabled description"
-msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
-msgstr "列印內壁時如果該位置已經有牆壁存在，所進行的的流量補償。"
+msgctxt "min_even_wall_line_width description"
+msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow label"
-msgid "Minimum Wall Flow"
-msgstr "最小牆壁流量"
+msgctxt "wall_split_middle_threshold label"
+msgid "Split Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow description"
-msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
-msgstr "牆壁允許的最小流量百分比。當在已列印的牆壁旁列印牆壁時，「補償牆壁重疊」會減少線材流量。小於此設定流量的牆壁會被空跑取代。當啟用此設定時，必需啟用「補償牆壁重疊」並設定先列印外壁再列印內壁。"
+msgctxt "wall_split_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which the middle line (if there is one) will be split into two. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract label"
-msgid "Prefer Retract"
-msgstr "回抽優先"
+msgctxt "min_odd_wall_line_width label"
+msgid "Minimum Odd Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "wall_min_flow_retract description"
-msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
-msgstr "當此功能開啟時，對於低於最小流量門檻值的牆壁，使用回抽取代而非梳理模式空跑。"
+msgctxt "min_odd_wall_line_width description"
+msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width,"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps label"
-msgid "Fill Gaps Between Walls"
-msgstr "填充牆壁之間空隙"
+msgctxt "wall_add_middle_threshold label"
+msgid "Add Middle Line Threshold"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps description"
-msgid "Fills the gaps between walls where no walls fit."
-msgstr "填充牆壁之間空隙。"
+msgctxt "wall_add_middle_threshold description"
+msgid "The smallest line width, as a factor of the normal line width, above which a middle line (if there wasn't one already) will be added. Reduce this setting to use more, thinner lines. Increase to use fewer, wider lines. Note that this applies -as if- the entire shape should be filled with wall, so the middle here refers to the middle of the object between two outer edges of the shape, even if there actually is fill or (other) skin in the print instead of wall."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option nowhere"
-msgid "Nowhere"
-msgstr "都不填充"
+msgctxt "fill_outline_gaps label"
+msgid "Print Thin Walls"
+msgstr "列印薄壁"
 
 #: fdmprinter.def.json
-msgctxt "fill_perimeter_gaps option everywhere"
-msgid "Everywhere"
-msgstr "全部填充"
+msgctxt "fill_outline_gaps description"
+msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
+msgstr "列印在水平面上比噴頭尺寸更薄的模型部件。"
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps label"
-msgid "Filter Out Tiny Gaps"
-msgstr "濾除微小間隙"
+msgctxt "min_feature_size label"
+msgid "Minimum Feature Size"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "filter_out_tiny_gaps description"
-msgid "Filter out tiny gaps to reduce blobs on outside of model."
-msgstr "濾除微小間隙以減少模型外側的斑點 。"
+msgctxt "min_feature_size description"
+msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps label"
-msgid "Print Thin Walls"
-msgstr "列印薄壁"
+msgctxt "min_bead_width label"
+msgid "Minimum Thin Wall Line Width"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "fill_outline_gaps description"
-msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
-msgstr "列印在水平面上比噴頭尺寸更薄的模型部件。"
+msgctxt "min_bead_width description"
+msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
@@ -2200,6 +2260,26 @@ msgid "To compensate for the shrinkage of the material as it cools down, the mod
 msgstr "為了補償線材在冷卻時的收縮，模型會依此比例放大列印。"
 
 #: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy label"
+msgid "Horizontal Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_xy description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z label"
+msgid "Vertical Scaling Factor Shrinkage Compensation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_shrinkage_percentage_z description"
+msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_crystallinity label"
 msgid "Crystalline Material"
 msgstr "晶狀線材"
@@ -2710,24 +2790,14 @@ msgid "The first few layers are printed slower than the rest of the model, to ge
 msgstr "前幾層的列印速度比模型的其他層慢，以便實現與列印平台的更好附著，並改善整體的列印成功率。該速度在這些層中會逐漸增加。"
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled label"
-msgid "Equalize Filament Flow"
-msgstr "均衡線材流量"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_enabled description"
-msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
-msgstr "以較快的速度列印比正常線條更細的線條，使每秒擠出的線材量保持相同。模型中較薄的部分可能需要以低於設定中所提供寬度的線寬來列印線條。該設定控制這些線條的速度變化。"
-
-#: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max label"
-msgid "Maximum Speed for Flow Equalization"
-msgstr "流量均衡的最大速度"
+msgctxt "speed_equalize_flow_width_factor label"
+msgid "Flow Equalization Ratio"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "speed_equalize_flow_max description"
-msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
-msgstr "調整列印速度以便均衡流量時的最大列印速度。"
+msgctxt "speed_equalize_flow_width_factor description"
+msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "acceleration_enabled label"
@@ -4465,6 +4535,46 @@ msgid "The extruder train to use for printing the skirt/brim/raft. This is used
 msgstr "用於列印外圍/邊緣/木筏的擠出機組。在多擠出機情況下適用。"
 
 #: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr label"
+msgid "Skirt/Brim Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_extruder_nr description"
+msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr label"
+msgid "Raft Base Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_extruder_nr description"
+msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr label"
+msgid "Raft Middle Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_extruder_nr description"
+msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr label"
+msgid "Raft Top Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_surface_extruder_nr description"
+msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
 msgstr "外圍線條數量"
@@ -4629,6 +4739,16 @@ msgid "The distance between the raft lines for the top raft layers. The spacing
 msgstr "木筏頂部線條之間的距離。間距應等於線寬，以便打造堅固表面。"
 
 #: fdmprinter.def.json
+msgctxt "raft_interface_layers label"
+msgid "Raft Middle Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_interface_layers description"
+msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "raft_interface_thickness label"
 msgid "Raft Middle Thickness"
 msgstr "木筏中層厚度"
@@ -5129,6 +5249,16 @@ msgid "The maximum deviation allowed when reducing the resolution for the Maximu
 msgstr "降低「最高解析度」設定時允許的最大偏差範圍。假如你增加這個設定值，列印精度會降低，但 G-code 會較小。最大偏差是最高解析度的限制，所以當兩者衝突時，會以最大偏差成立為優先。"
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation label"
+msgid "Maximum Extrusion Area Deviation"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_extrusion_area_deviation description"
+msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr "特殊模式"
@@ -6423,6 +6553,36 @@ msgid "Small features on the first layer will be printed at this percentage of t
 msgstr "第一層的細部模式將以正常列印速度的此百分比值列印。 較慢的列印有助於黏合和精度。"
 
 #: fdmprinter.def.json
+msgctxt "material_alternate_walls label"
+msgid "Alternate Wall Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_alternate_walls description"
+msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners label"
+msgid "Remove Raft Inside Corners"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_remove_inside_corners description"
+msgid "Remove inside corners from the raft, causing the raft to become convex."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count label"
+msgid "Raft Base Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "raft_base_wall_count description"
+msgid "The number of contours to print around the linear pattern in the base layer of the raft."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr "命令行設定"
@@ -6482,6 +6642,98 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "在將模型從檔案中載入時套用在模型上的轉換矩陣。"
 
+#~ msgctxt "machine_head_with_fans_polygon description"
+#~ msgid "A 2D silhouette of the print head (fan caps included)."
+#~ msgstr "列印頭 2D 輪廓圖（包含風扇蓋）。"
+
+#~ msgctxt "outer_inset_first label"
+#~ msgid "Outer Before Inner Walls"
+#~ msgstr "先印外壁後印內壁"
+
+#~ msgctxt "outer_inset_first description"
+#~ msgid "Prints walls in order of outside to inside when enabled. This can help improve dimensional accuracy in X and Y when using a high viscosity plastic like ABS; however it can decrease outer surface print quality, especially on overhangs."
+#~ msgstr "啟用時以從外向內的順序列印牆壁。當使用高黏度塑料如 ABS 時，這有助於提高 X 和 Y 的尺寸精度；但是，它可能會降低表面列印品質，尤其是在突出部分。"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled label"
+#~ msgid "Compensate Wall Overlaps"
+#~ msgstr "補償牆壁重疊"
+
+#~ msgctxt "travel_compensate_overlapping_walls_enabled description"
+#~ msgid "Compensate the flow for parts of a wall being printed where there is already a wall in place."
+#~ msgstr "彌補牆壁重疊部分的流量。"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled label"
+#~ msgid "Compensate Outer Wall Overlaps"
+#~ msgstr "補償外壁重疊"
+
+#~ msgctxt "travel_compensate_overlapping_walls_0_enabled description"
+#~ msgid "Compensate the flow for parts of an outer wall being printed where there is already a wall in place."
+#~ msgstr "列印外壁時如果該位置已經有牆壁存在，所進行的的流量補償。"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled label"
+#~ msgid "Compensate Inner Wall Overlaps"
+#~ msgstr "補償內壁重疊"
+
+#~ msgctxt "travel_compensate_overlapping_walls_x_enabled description"
+#~ msgid "Compensate the flow for parts of an inner wall being printed where there is already a wall in place."
+#~ msgstr "列印內壁時如果該位置已經有牆壁存在，所進行的的流量補償。"
+
+#~ msgctxt "wall_min_flow label"
+#~ msgid "Minimum Wall Flow"
+#~ msgstr "最小牆壁流量"
+
+#~ msgctxt "wall_min_flow description"
+#~ msgid "Minimum allowed percentage flow for a wall line. The wall overlap compensation reduces a wall's flow when it lies close to an existing wall. Walls whose flow is less than this value will be replaced with a travel move. When using this setting, you must enable the wall overlap compensation and print the outer wall before inner walls."
+#~ msgstr "牆壁允許的最小流量百分比。當在已列印的牆壁旁列印牆壁時，「補償牆壁重疊」會減少線材流量。小於此設定流量的牆壁會被空跑取代。當啟用此設定時，必需啟用「補償牆壁重疊」並設定先列印外壁再列印內壁。"
+
+#~ msgctxt "wall_min_flow_retract label"
+#~ msgid "Prefer Retract"
+#~ msgstr "回抽優先"
+
+#~ msgctxt "wall_min_flow_retract description"
+#~ msgid "If enabled, retraction is used rather than combing for travel moves that replace walls whose flow is below the minimum flow threshold."
+#~ msgstr "當此功能開啟時，對於低於最小流量門檻值的牆壁，使用回抽取代而非梳理模式空跑。"
+
+#~ msgctxt "fill_perimeter_gaps label"
+#~ msgid "Fill Gaps Between Walls"
+#~ msgstr "填充牆壁之間空隙"
+
+#~ msgctxt "fill_perimeter_gaps description"
+#~ msgid "Fills the gaps between walls where no walls fit."
+#~ msgstr "填充牆壁之間空隙。"
+
+#~ msgctxt "fill_perimeter_gaps option nowhere"
+#~ msgid "Nowhere"
+#~ msgstr "都不填充"
+
+#~ msgctxt "fill_perimeter_gaps option everywhere"
+#~ msgid "Everywhere"
+#~ msgstr "全部填充"
+
+#~ msgctxt "filter_out_tiny_gaps label"
+#~ msgid "Filter Out Tiny Gaps"
+#~ msgstr "濾除微小間隙"
+
+#~ msgctxt "filter_out_tiny_gaps description"
+#~ msgid "Filter out tiny gaps to reduce blobs on outside of model."
+#~ msgstr "濾除微小間隙以減少模型外側的斑點 。"
+
+#~ msgctxt "speed_equalize_flow_enabled label"
+#~ msgid "Equalize Filament Flow"
+#~ msgstr "均衡線材流量"
+
+#~ msgctxt "speed_equalize_flow_enabled description"
+#~ msgid "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines."
+#~ msgstr "以較快的速度列印比正常線條更細的線條，使每秒擠出的線材量保持相同。模型中較薄的部分可能需要以低於設定中所提供寬度的線寬來列印線條。該設定控制這些線條的速度變化。"
+
+#~ msgctxt "speed_equalize_flow_max label"
+#~ msgid "Maximum Speed for Flow Equalization"
+#~ msgstr "流量均衡的最大速度"
+
+#~ msgctxt "speed_equalize_flow_max description"
+#~ msgid "Maximum print speed when adjusting the print speed in order to equalize flow."
+#~ msgstr "調整列印速度以便均衡流量時的最大列印速度。"
+
 #~ msgctxt "machine_max_feedrate_e label"
 #~ msgid "Maximum Feedrate"
 #~ msgstr "最大進料速率"