17 files changed, 34 insertions, 34 deletions
diff --git a/resources/i18n/cs_CZ/fdmprinter.def.json.po b/resources/i18n/cs_CZ/fdmprinter.def.json.po
index 1936e6aed7..3659e2d79d 100644
--- a/resources/i18n/cs_CZ/fdmprinter.def.json.po
+++ b/resources/i18n/cs_CZ/fdmprinter.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2020-04-07 11:21+0200\n"
 "Last-Translator: DenyCZ <www.github.com/DenyCZ>\n"
 "Language-Team: DenyCZ <www.github.com/DenyCZ>\n"
@@ -3489,7 +3489,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/de_DE/fdmprinter.def.json.po b/resources/i18n/de_DE/fdmprinter.def.json.po
index 4dc326081c..06e73a1d29 100644
--- a/resources/i18n/de_DE/fdmprinter.def.json.po
+++ b/resources/i18n/de_DE/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2019-07-29 15:51+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: German <info@lionbridge.com>, German <info@bothof.nl>\n"
@@ -3490,7 +3490,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/es_ES/fdmprinter.def.json.po b/resources/i18n/es_ES/fdmprinter.def.json.po
index b24b061383..30f8c0061c 100644
--- a/resources/i18n/es_ES/fdmprinter.def.json.po
+++ b/resources/i18n/es_ES/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2019-07-29 15:51+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Spanish <info@lionbridge.com>, Spanish <info@bothof.nl>\n"
@@ -3490,7 +3490,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/fi_FI/fdmprinter.def.json.po b/resources/i18n/fi_FI/fdmprinter.def.json.po
index b05f27e5d9..5f5a55c7bf 100644
--- a/resources/i18n/fi_FI/fdmprinter.def.json.po
+++ b/resources/i18n/fi_FI/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2017-09-27 12:27+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
@@ -3483,7 +3483,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/fr_FR/fdmprinter.def.json.po b/resources/i18n/fr_FR/fdmprinter.def.json.po
index 4bdd66156e..91e46db74f 100644
--- a/resources/i18n/fr_FR/fdmprinter.def.json.po
+++ b/resources/i18n/fr_FR/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2019-07-29 15:51+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: French <info@lionbridge.com>, French <info@bothof.nl>\n"
@@ -3490,7 +3490,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/hu_HU/fdmprinter.def.json.po b/resources/i18n/hu_HU/fdmprinter.def.json.po
index a2b83c6744..33ce070823 100644
--- a/resources/i18n/hu_HU/fdmprinter.def.json.po
+++ b/resources/i18n/hu_HU/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2020-03-24 09:43+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: AT-VLOG\n"
@@ -3491,7 +3491,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/it_IT/fdmprinter.def.json.po b/resources/i18n/it_IT/fdmprinter.def.json.po
index 3e77da90e1..a97f1fd12b 100644
--- a/resources/i18n/it_IT/fdmprinter.def.json.po
+++ b/resources/i18n/it_IT/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2019-07-29 15:51+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Italian <info@lionbridge.com>, Italian <info@bothof.nl>\n"
@@ -3490,7 +3490,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/ja_JP/fdmprinter.def.json.po b/resources/i18n/ja_JP/fdmprinter.def.json.po
index f64d41691b..156b97f71a 100644
--- a/resources/i18n/ja_JP/fdmprinter.def.json.po
+++ b/resources/i18n/ja_JP/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2019-09-23 14:15+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Japanese <info@lionbridge.com>, Japanese <info@bothof.nl>\n"
@@ -3582,7 +3582,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/ko_KR/fdmprinter.def.json.po b/resources/i18n/ko_KR/fdmprinter.def.json.po
index 81b708101f..52770fac4c 100644
--- a/resources/i18n/ko_KR/fdmprinter.def.json.po
+++ b/resources/i18n/ko_KR/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2020-02-21 14:59+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Korean <info@lionbridge.com>, Jinbum Kim <Jinbuhm.Kim@gmail.com>, Korean <info@bothof.nl>\n"
@@ -3491,7 +3491,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/nl_NL/fdmprinter.def.json.po b/resources/i18n/nl_NL/fdmprinter.def.json.po
index 920455022a..f99c47bb0b 100644
--- a/resources/i18n/nl_NL/fdmprinter.def.json.po
+++ b/resources/i18n/nl_NL/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2019-07-29 15:51+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Dutch <info@lionbridge.com>, Dutch <info@bothof.nl>\n"
@@ -3490,7 +3490,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/pl_PL/fdmprinter.def.json.po b/resources/i18n/pl_PL/fdmprinter.def.json.po
index fb091da62b..c4da414468 100644
--- a/resources/i18n/pl_PL/fdmprinter.def.json.po
+++ b/resources/i18n/pl_PL/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2019-11-15 15:34+0100\n"
 "Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
 "Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
@@ -3490,7 +3490,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/pt_BR/fdmprinter.def.json.po b/resources/i18n/pt_BR/fdmprinter.def.json.po
index 91e3f8ad12..d16149c712 100644
--- a/resources/i18n/pt_BR/fdmprinter.def.json.po
+++ b/resources/i18n/pt_BR/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2020-04-13 05:50+0100\n"
 "Last-Translator: Cláudio Sampaio <patola@gmail.com>\n"
 "Language-Team: Cláudio Sampaio <patola@gmail.com>\n"
@@ -3491,7 +3491,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/pt_PT/fdmprinter.def.json.po b/resources/i18n/pt_PT/fdmprinter.def.json.po
index b672bb9f56..89ce2fa78c 100644
--- a/resources/i18n/pt_PT/fdmprinter.def.json.po
+++ b/resources/i18n/pt_PT/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2019-07-29 15:51+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Portuguese <info@lionbridge.com>, Paulo Miranda <av@utopica3d.com>, Portuguese <info@bothof.nl>\n"
@@ -3609,7 +3609,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/ru_RU/fdmprinter.def.json.po b/resources/i18n/ru_RU/fdmprinter.def.json.po
index edf4b71631..332803421d 100644
--- a/resources/i18n/ru_RU/fdmprinter.def.json.po
+++ b/resources/i18n/ru_RU/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2020-02-21 15:14+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Russian <info@lionbridge.com>, Ruslan Popov <ruslan.popov@gmail.com>, Russian <info@bothof.nl>\n"
@@ -3491,7 +3491,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/tr_TR/fdmprinter.def.json.po b/resources/i18n/tr_TR/fdmprinter.def.json.po
index 884797769f..901aab7696 100644
--- a/resources/i18n/tr_TR/fdmprinter.def.json.po
+++ b/resources/i18n/tr_TR/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2020-04-15 17:50+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Turkish <info@lionbridge.com>, Turkish <info@bothof.nl>\n"
@@ -3490,7 +3490,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/zh_CN/fdmprinter.def.json.po b/resources/i18n/zh_CN/fdmprinter.def.json.po
index fd5f92a36f..ff76218d5e 100644
--- a/resources/i18n/zh_CN/fdmprinter.def.json.po
+++ b/resources/i18n/zh_CN/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2019-09-23 14:18+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Chinese <info@lionbridge.com>, PCDotFan <pc@edu.ax>, Chinese <info@bothof.nl>\n"
@@ -3491,7 +3491,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json
diff --git a/resources/i18n/zh_TW/fdmprinter.def.json.po b/resources/i18n/zh_TW/fdmprinter.def.json.po
index 9e034ebde6..f7ef9dcbd2 100644
--- a/resources/i18n/zh_TW/fdmprinter.def.json.po
+++ b/resources/i18n/zh_TW/fdmprinter.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.7\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-07-31 12:48+0000\n"
+"POT-Creation-Date: 2020-07-31 14:10+0000\n"
 "PO-Revision-Date: 2020-02-19 22:42+0800\n"
 "Last-Translator: Zhang Heh Ji <dinowchang@gmail.com>\n"
 "Language-Team: Zhang Heh Ji <dinowchang@gmail.com>\n"
@@ -3491,7 +3491,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_structure description"
-msgid "Generate a tree-like support "
+msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
 msgstr ""
 
 #: fdmprinter.def.json