diff options
4 files changed, 146 insertions, 0 deletions
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg new file mode 100644 index 0000000000..a299659375 --- /dev/null +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg @@ -0,0 +1,44 @@ +[general] +version = 4 +name = Quick +definition = ultimaker_s5 + +[metadata] +setting_version = 19 +type = intent +intent_category = quick +quality_type = verydraft +material = generic_pla +variant = AA 0.4 + +[values] +infill_sparse_density = 10 + +jerk_print = 30 +jerk_infill = =jerk_print +jerk_topbottom = =jerk_print +jerk_wall = =jerk_print +jerk_wall_0 = =jerk_wall +jerk_wall_x = =jerk_wall +jerk_layer_0 = 5 + +acceleration_print = 4000 +acceleration_wall = 2000 +acceleration_wall_0 = 2000 + +speed_print = 50 +speed_infill = =speed_print +speed_topbottom = =speed_print +speed_wall = =speed_print +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +speed_layer_0 = 20 + +line_width = =machine_nozzle_size +wall_line_width_x = =line_width +infill_line_width = =line_width +wall_thickness = =line_width * 2 +top_bottom_thickness = =wall_thickness + +fill_perimeter_gaps = nowhere +support_structure = "tree" diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg new file mode 100644 index 0000000000..b033b5c421 --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s5 + +[metadata] +setting_version = 18 +type = quality +quality_type = verydraft +weight = -2 +material = generic_bam +variant = AA 0.4 + +[values] +brim_replaces_support = False +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature + 5 +# prime_tower_enable: see CURA-4248 +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +skin_overlap = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_topbottom = =math.ceil(speed_print * 35 / 70) +speed_wall = =math.ceil(speed_print * 50 / 70) +speed_wall_0 = =math.ceil(speed_wall * 35 / 50) +top_bottom_thickness = 1 +wall_thickness = 1 +support_brim_enable = True +support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) +support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' +support_top_distance = 0.3 +support_bottom_distance = 0.3 +support_angle = 45 +support_join_distance = 5 +support_offset = 2 +support_pattern = triangles +support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg new file mode 100644 index 0000000000..faf5a1e15f --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -0,0 +1,43 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s5 + +[metadata] +setting_version = 19 +type = quality +quality_type = verydraft +weight = -2 +material = generic_pla +variant = AA 0.4 + +[values] +infill_sparse_density = 15 + +jerk_travel = 20 +acceleration_print = 2000 +acceleration_wall = 1500 +acceleration_wall_0 = 1000 +acceleration_topbottom = 1000 +acceleration_travel = 2000 + +speed_print = 50 +speed_wall = 50 + +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed + +material_print_temperature = =default_material_print_temperature + 10 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_standby_temperature = 100 + +prime_tower_enable = False +skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 +skin_overlap = 20 + +infill_line_width = =round(line_width * 0.42 / 0.35, 2) +wall_thickness = =line_width * 3 +top_bottom_thickness = 0.9 + +raft_airgap = =0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..17cdee3933 --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s5 + +[metadata] +setting_version = 18 +type = quality +quality_type = verydraft +weight = -3 +material = generic_pva +variant = BB 0.4 + +[values] +brim_replaces_support = False +material_standby_temperature = 100 +support_brim_enable = True +support_infill_sparse_thickness = 0.3 +support_interface_height = 1.2 |