diff options
88 files changed, 4 insertions, 319 deletions
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg index ed1312583e..f2095ba055 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -22,11 +22,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 15 jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 + diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index b98688044f..1caacdf72f 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index 344cd30b8d..315b26a3b1 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index 4e33b36ee1..d4a999d8eb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index 8cdf66b6fe..aa371be6f3 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg index ff9e5755b3..abd125f483 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index 1d68116a7f..c8cf2a3bd4 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg index 168b920b80..b4bbdddff7 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index 70347ae80f..19418812af 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index 9b2de341e6..36ea7c975e 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index b9193339bf..88691ef1d6 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg index 70abf19142..b59ed875b4 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg @@ -16,12 +16,6 @@ is_experimental = True infill_sparse_density = 10 jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 acceleration_print = 4000 acceleration_wall = 2000 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 0cf2b8f993..924edf577d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg index 95d4d65b4a..98ad3af40b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -22,11 +22,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 15 jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 + diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg index ad0eda8726..8939d670b1 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg index 7d1026b479..7bf1fc834a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index 52bd47103f..a95862c35a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg index 55eaac45cf..bfdd35017c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index b831e25ce6..022fb2b50d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index e1b8a1c712..3637040c4c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index ed808aaf03..6cce98ca60 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg index adc4169968..32e0463447 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index bccd269c87..0b7ffb4154 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index 585c2f72b5..545a8b5654 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg index 4c9608ddaf..76d9191fc1 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg @@ -22,11 +22,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 15 jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 + diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index 11a2c5e134..ca098b5bfa 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index f9a3c3f775..472c0b4359 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg index 12752123f4..51cfaebe34 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg @@ -16,12 +16,6 @@ is_experimental = True infill_sparse_density = 10 jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 acceleration_print = 4000 acceleration_wall = 2000 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg index 7aaff9a062..7851ecd793 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg @@ -22,11 +22,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 15 jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 + diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 84c9293467..2b1b769595 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg index 8d8825ca41..daa327a2f5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg @@ -14,12 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 speed_print = 30 speed_infill = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg index a3e850c05d..ec93cc5599 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg @@ -16,12 +16,6 @@ is_experimental = True infill_sparse_density = 10 jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 acceleration_print = 4000 acceleration_wall = 2000 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index 5e84e3f167..2fbee8d9c2 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -29,15 +29,6 @@ cool_min_speed = 20 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' infill_wipe_dist = 0 -jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index 10cbfab427..f21e02d5d7 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -29,15 +29,6 @@ cool_min_speed = 20 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' infill_wipe_dist = 0 -jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index e88b527308..dd8cfd35d2 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -29,15 +29,6 @@ cool_min_speed = 20 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' infill_wipe_dist = 0 -jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg index 70aecc029f..381dc5d6f8 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg @@ -29,15 +29,6 @@ cool_min_speed = 20 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 -jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg index 8b28161b09..7586904bb5 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg @@ -29,15 +29,6 @@ cool_min_speed = 20 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 -jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg index b1d7adfd0b..2d8d2a1225 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg @@ -29,15 +29,6 @@ cool_min_speed = 20 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 -jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg index a64996c8f0..61ea9914b9 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg @@ -29,15 +29,6 @@ cool_min_speed = 20 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 -jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg index 232d74d602..238a9aa1ce 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg @@ -29,15 +29,6 @@ cool_min_speed = 20 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 -jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index c17554a0cc..1b06cb31b2 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -21,7 +21,6 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index f2b4caf168..7780c5a4f5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -17,7 +17,6 @@ cool_min_speed = 5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index addd4790db..cf7e671740 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -17,7 +17,6 @@ cool_min_speed = 6 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.15 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 3c1baa8640..c5584d8ebd 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -17,7 +17,6 @@ cool_min_speed = 5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.06 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index e0c239c536..a1c956235c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -17,7 +17,6 @@ cool_min_speed = 7 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index f33132ee5b..06a399982b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -23,7 +23,6 @@ infill_overlap = 0 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 8c02c9c816..bc82123384 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ cool_min_speed = 7 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 layer_height = 0.15 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 4ff801f4fa..746e1bf4a2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -23,7 +23,6 @@ infill_overlap = 0 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 layer_height = 0.06 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 180d96011d..f0e0e97ab3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -22,7 +22,6 @@ cool_min_speed = 5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index 52aadd5b2d..7beb3697cf 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -21,7 +21,6 @@ cool_min_speed = 2.5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index e20587931f..227b16db92 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -16,7 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 jerk_print = 25 -jerk_roofing = 1 layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index b5cc9b7261..47939c1a8d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 4e7696c0b3..1baadf59a0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 layer_height = 0.15 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index caed386864..4e9aa528df 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index d0668b64f6..cd5a6ece36 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -19,7 +19,6 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 material_bed_temperature_layer_0 = =material_bed_temperature + 5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index 0b8555734e..04feb8bc3e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -17,7 +17,6 @@ cool_min_speed = 5 infill_overlap = 0 infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg index bba0f354c9..a4f6670bb6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -17,7 +17,6 @@ cool_min_speed = 7 infill_overlap = 0 infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index a9cdf6336d..9581f95cf0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ cool_min_speed = 7 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index 75eba5b995..17ff0c29c0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ cool_min_speed = 2.5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index fdf769ed38..98af956680 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -20,7 +20,6 @@ cool_min_speed = 2.5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 821e1f4840..377756def0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -21,7 +21,6 @@ cool_min_speed = 2.5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index a9e32a5283..c3837c7850 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -16,7 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 jerk_print = 25 -jerk_roofing = 1 layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index 566f474dc4..49882c937e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -22,9 +22,7 @@ infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 - machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index e968507192..722a6bd2e8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index e77d2a2dd9..7f83286f73 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -21,7 +21,6 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index 85a608c293..338bb22d26 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -19,7 +19,6 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 material_bed_temperature_layer_0 = =material_bed_temperature + 5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index 1d12f8f8d9..495cf61bb5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -17,7 +17,6 @@ cool_min_speed = 5 infill_overlap = 0 infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index 12db110133..004a2d1e3b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -17,7 +17,6 @@ cool_min_speed = 6 infill_overlap = 0 infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index 71102926d8..f6ec122e53 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -16,7 +16,6 @@ cool_fan_speed_max = 50 cool_min_speed = 7 infill_overlap = 0 infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index d9bc39705b..a1a6c983d3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = 0 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 03999c27e1..605322ee27 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ cool_min_speed = 7 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index de05aa5cac..6445e2deb0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -23,7 +23,6 @@ infill_overlap = 0 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index 658e118686..3d7242cf56 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -22,7 +22,6 @@ cool_min_speed = 5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index 5da2b96e2d..5f42de95a2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -21,9 +21,7 @@ cool_min_speed = 2.5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 - machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index cc5a911809..31e7216706 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -21,9 +21,7 @@ cool_min_speed = 2.5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 - machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index 82646132a0..1121fe6507 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -21,7 +21,6 @@ cool_min_speed = 2.5 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 8778abc64e..5bc61f0fbe 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index 1725470319..0b38a609ba 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 782b9d896a..276f497bb3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 -jerk_enabled = True jerk_print = 25 machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index ead9c3b87a..7f81c8e8fb 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -17,7 +17,6 @@ default_material_print_temperature = 200 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 8b9b575a46..3073a91365 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -22,7 +22,6 @@ gradual_support_infill_steps = 2 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index 60dfc44e8c..ff60b47f48 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -15,9 +15,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) cool_fan_speed_max = =cool_fan_speed gradual_support_infill_steps = 2 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index df7e9486a2..c751dfd6fc 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -17,7 +17,6 @@ default_material_print_temperature = 200 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index e5caf082c6..d8e5b8f865 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -22,7 +22,6 @@ gradual_support_infill_steps = 2 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index 237b38fa11..e88d5aa64a 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -17,7 +17,6 @@ default_material_print_temperature = 200 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index cdd8c4814f..c4a73a2ef3 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -21,7 +21,6 @@ gradual_support_infill_steps = 2 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg index 2fad997372..3619fbc9b5 100644 --- a/resources/variants/ultimaker_s3_bb04.inst.cfg +++ b/resources/variants/ultimaker_s3_bb04.inst.cfg @@ -15,9 +15,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500) cool_fan_speed_max = =cool_fan_speed gradual_support_infill_steps = 2 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index 57c9ab6193..759bab3f6b 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -21,7 +21,6 @@ gradual_support_infill_steps = 2 infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 -jerk_enabled = True jerk_print = 25 layer_height = 0.2 machine_min_cool_heat_time_window = 15 |