diff options
135 files changed, 55 insertions, 626 deletions
diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index 1546a268de..06e3cd00d0 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -239,6 +239,33 @@ "gradual_support_infill_step_height": { "value": "4*layer_height" }, + "raft_base_speed": { + "value": "raft_speed" + }, + "raft_base_thickness": { + "value": "min(machine_nozzle_size * 0.75, 0.3)" + }, + "raft_interface_fan_speed": { + "value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2" + }, + "raft_interface_line_width": { + "value": "(raft_base_line_width + raft_surface_line_width) / 2" + }, + "raft_interface_speed": { + "value": "(raft_surface_speed + raft_base_speed) /2" + }, + "raft_interface_thickness": { + "value": "(raft_base_thickness + raft_surface_thickness) / 2" + }, + "raft_speed": { + "value": 15 + }, + "raft_surface_fan_speed": { + "value": "cool_fan_speed" + }, + "raft_surface_speed": { + "value": "speed_topbottom" + }, "support_interface_height": { "value": "2*layer_height" }, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 13835d2b72..fad1eaf2ea 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -111,13 +111,6 @@ "multiple_mesh_overlap": { "value": "0" }, "optimize_wall_printing_order": { "value": "True" }, "prime_tower_enable": { "default_value": true }, - "raft_airgap": { "value": "0" }, - "raft_base_thickness": { "value": "0.3" }, - "raft_interface_line_spacing": { "value": "0.5" }, - "raft_interface_line_width": { "value": "0.5" }, - "raft_interface_thickness": { "value": "0.2" }, - "raft_margin": { "value": "10" }, - "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "6.5" }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index f9ae7a14a9..78986133a7 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -100,16 +100,6 @@ "multiple_mesh_overlap": { "value": "0" }, "optimize_wall_printing_order": { "value": "True" }, "prime_tower_enable": { "value": "True" }, - "raft_airgap": { "value": "0" }, - "raft_base_speed": { "value": "20" }, - "raft_base_thickness": { "value": "0.3" }, - "raft_interface_line_spacing": { "value": "0.5" }, - "raft_interface_line_width": { "value": "0.5" }, - "raft_interface_speed": { "value": "20" }, - "raft_interface_thickness": { "value": "0.2" }, - "raft_margin": { "value": "10" }, - "raft_speed": { "value": "25" }, - "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "6.5" }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index d1ae61d4fe..33b3f926e5 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -101,16 +101,6 @@ "default_material_print_temperature": { "value": "200" }, "multiple_mesh_overlap": { "value": "0" }, "prime_tower_enable": { "value": "True" }, - "raft_airgap": { "value": "0" }, - "raft_base_speed": { "value": "20" }, - "raft_base_thickness": { "value": "0.3" }, - "raft_interface_line_spacing": { "value": "0.5" }, - "raft_interface_line_width": { "value": "0.5" }, - "raft_interface_speed": { "value": "20" }, - "raft_interface_thickness": { "value": "0.2" }, - "raft_margin": { "value": "10" }, - "raft_speed": { "value": "25" }, - "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "6.5" }, "retraction_combing": { "value": "'no_outer_surfaces'"}, "retraction_hop": { "value": "2" }, diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg index 881571c5a3..49703c592d 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg @@ -21,12 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 -raft_surface_line_width = 0.38 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg index 627eb26587..6503460702 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg @@ -21,12 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 -raft_surface_line_width = 0.38 speed_layer_0 = =math.ceil(speed_print * 15 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg index afb26d0ddb..9dec35e4a5 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg @@ -22,13 +22,6 @@ infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.57 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg index cb9ade1813..b3751e0bbc 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg @@ -22,13 +22,6 @@ infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.57 -raft_surface_thickness = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg index 431e39c85f..492d54f63c 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg @@ -21,12 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg index f0a60e8af3..79cd4cb0b2 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg @@ -21,12 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg index 404023db87..21ed3ff9ee 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg @@ -21,11 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 25 layer_0_z_overlap = 0.1 raft_airgap = 0.15 -raft_base_line_width = 0.5 -raft_interface_line_spacing = 0.7 -raft_interface_line_width = 0.5 -raft_margin = 15 -raft_surface_line_width = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg index 2f77288341..4746d98537 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg @@ -21,11 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 25 layer_0_z_overlap = 0.1 raft_airgap = 0.15 -raft_base_line_width = 0.5 -raft_interface_line_spacing = 0.7 -raft_interface_line_width = 0.5 -raft_margin = 15 -raft_surface_line_width = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg index 71f03adfd9..19d0dd03aa 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg @@ -20,13 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 raft_airgap = 0.57 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 -raft_surface_line_width = 0.5 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg index bd2372dc16..4e7e6981a5 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg @@ -20,13 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 raft_airgap = 0.57 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 -raft_surface_line_width = 0.5 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg index cd5a66151d..7e9be134b7 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg @@ -20,13 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.44 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg index 7c03a0faeb..c8bd8b8055 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg @@ -20,13 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.44 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg index 9f4c534c86..c3eeef66a6 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg @@ -20,12 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.25 raft_airgap = 0.44 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg index 1239c43800..243169012a 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg @@ -20,12 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.25 raft_airgap = 0.44 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg index a3e95a3a88..6a15d8959d 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg @@ -22,12 +22,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 25 layer_0_z_overlap = 0.2 raft_airgap = 0.25 -raft_base_line_spacing = 1 -raft_base_line_width = 0.5 -raft_interface_line_spacing = 0.7 -raft_interface_line_width = 0.5 -raft_margin = 15 -raft_surface_line_width = 0.2 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 support_enable = True diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg index e81cece3d1..2c498c3e5b 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg @@ -22,12 +22,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 25 layer_0_z_overlap = 0.2 raft_airgap = 0.25 -raft_base_line_spacing = 1 -raft_base_line_width = 0.5 -raft_interface_line_spacing = 0.7 -raft_interface_line_width = 0.5 -raft_margin = 15 -raft_surface_line_width = 0.2 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 support_enable = True diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg index bca94eb325..4bc50328e8 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg @@ -21,11 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.3 raft_airgap = 0.35 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg index 7d8f4f7f74..f26d676a04 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg @@ -21,11 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.3 raft_airgap = 0.35 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg index 2c3c3172ac..7adbef71a2 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg @@ -21,13 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.52 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg index 80967c9543..8c627e7507 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg @@ -21,13 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.52 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg index 952265384c..a0422892c3 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg @@ -21,12 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.22 raft_airgap = 0.47 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 support_angle = 45 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg index c082f75d52..3fa7cd089f 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg @@ -21,12 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.22 raft_airgap = 0.47 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 support_angle = 45 diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg index e8fcf8b392..0c0e9e8913 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg @@ -21,10 +21,6 @@ cool_min_speed = 15 infill_sparse_density = 10 layer_0_z_overlap = 0.1 raft_airgap = 0.2 -raft_base_line_spacing = 1 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.2 -raft_surface_line_width = 0.2 retraction_count_max = 15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg index 3a4c443011..48d88baa8d 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg @@ -19,10 +19,6 @@ cool_fan_speed_min = =cool_fan_speed * 35 / 60 cool_min_layer_time = 10 cool_min_speed = 15 infill_sparse_density = 10 -raft_base_line_spacing = 2 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_margin = 12 retraction_count_max = 15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg index 7381cddcfc..7d32b1e6c4 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg @@ -20,12 +20,6 @@ cool_min_speed = 15 infill_sparse_density = 10 layer_0_z_overlap = 0.12 raft_airgap = 0.24 -raft_base_line_spacing = 1.2 -raft_base_line_width = 0.6 -raft_interface_line_spacing = 1.2 -raft_interface_line_width = 0.57 -raft_margin = 15 -raft_surface_line_width = 0.5 retraction_count_max = 15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg index 076caebf21..a496c9b024 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg @@ -20,12 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 -raft_surface_line_width = 0.38 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 15 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg index eb2eb45552..67c5c16e65 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg @@ -20,12 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 -raft_surface_line_width = 0.38 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 15 / 35) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg index 255979e3a6..90396b40a7 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg @@ -20,13 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.57 -raft_surface_thickness = 0.2 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_layer_0 = =round(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg index 88eda6c8ec..7df3ca1322 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg @@ -20,13 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.57 -raft_surface_thickness = 0.2 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg index 9d7a3851d8..5ad74de77b 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg @@ -20,12 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg index 4801f03a05..dec0f67c1e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg @@ -20,12 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg index f08257d7d6..bd76fb2c17 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg @@ -20,11 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.1 raft_airgap = 0.15 -raft_base_line_width = 0.5 -raft_interface_line_spacing = 0.7 -raft_interface_line_width = 0.5 -raft_margin = 15 -raft_surface_line_width = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg index ab17f0589d..2e3e72b354 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg @@ -20,11 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.1 raft_airgap = 0.15 -raft_base_line_width = 0.5 -raft_interface_line_spacing = 0.7 -raft_interface_line_width = 0.5 -raft_margin = 15 -raft_surface_line_width = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg index d23859a47f..ecababf038 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg @@ -19,13 +19,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.57 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 -raft_surface_line_width = 0.5 -raft_surface_thickness = 0.15 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg index e5d05294f2..3bc6cdd0de 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg @@ -19,13 +19,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.57 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 -raft_surface_line_width = 0.5 -raft_surface_thickness = 0.15 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg index 59834b551d..5b71703b7f 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg @@ -19,13 +19,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.44 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg index 25480e1e7d..f439ac8971 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg @@ -19,13 +19,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.44 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg index ee0a2bd2a5..9fc2a85950 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg @@ -19,12 +19,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.25 raft_airgap = 0.44 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg index 9ac5d56bd7..560acf1335 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg @@ -19,12 +19,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.25 raft_airgap = 0.44 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 retraction_hop_enabled = 0.2 speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg index 4898c72327..8366aea6c2 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg @@ -21,12 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.2 raft_airgap = 0.25 -raft_base_line_spacing = 1 -raft_base_line_width = 0.5 -raft_interface_line_spacing = 0.7 -raft_interface_line_width = 0.5 -raft_margin = 15 -raft_surface_line_width = 0.2 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 support_enable = True diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg index 2d159792c9..2979294168 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg @@ -21,12 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.2 raft_airgap = 0.25 -raft_base_line_spacing = 1 -raft_base_line_width = 0.5 -raft_interface_line_spacing = 0.7 -raft_interface_line_width = 0.5 -raft_margin = 15 -raft_surface_line_width = 0.2 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 support_enable = True diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg index 86a965d441..f32a6969ad 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg @@ -20,11 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.3 raft_airgap = 0.35 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg index b782ea63d4..0e52da4cca 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg @@ -20,11 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.3 raft_airgap = 0.35 -raft_base_line_spacing = 1.6 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.8 -raft_margin = 15 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg index 739d72072f..b8c0c431d4 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg @@ -20,13 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.52 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg index d95596953e..7668a9c941 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg @@ -20,13 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.52 -raft_base_line_spacing = 2.4 -raft_base_line_width = 1.2 -raft_interface_line_spacing = 1.4 -raft_interface_line_width = 1.2 -raft_margin = 15 -raft_surface_line_width = 0.6 -raft_surface_thickness = 0.15 speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg index 751696ca93..c170588b34 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg @@ -20,12 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.47 -raft_base_line_width = 1.6 -raft_interface_line_spacing = 1.8 -raft_interface_line_width = 1.6 -raft_margin = 15 -raft_surface_line_width = 0.7 -raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 support_angle = 45 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg index 42c185a769..c9cc3bb528 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg @@ -21,10 +21,6 @@ cool_min_speed = 15 infill_sparse_density = 10 layer_0_z_overlap = 0.1 raft_airgap = 0.2 -raft_base_line_spacing = 1 -raft_interface_line_spacing = 1 -raft_interface_line_width = 0.2 -raft_surface_line_width = 0.2 retraction_count_max = 15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg index acf28f2ad3..752dcaadd2 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg @@ -19,10 +19,6 @@ cool_fan_speed_min = =cool_fan_speed * 35 / 60 cool_min_layer_time = 10 cool_min_speed = 15 infill_sparse_density = 10 -raft_base_line_spacing = 2 -raft_base_line_width = 0.8 -raft_interface_line_spacing = 1 -raft_margin = 12 retraction_count_max = 15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg index db3a812f97..4a8a99ce10 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg @@ -20,12 +20,6 @@ cool_min_speed = 15 infill_sparse_density = 10 layer_0_z_overlap = 0.12 raft_airgap = 0.24 -raft_base_line_spacing = 1.2 -raft_base_line_width = 0.6 -raft_interface_line_spacing = 1.2 -raft_interface_line_width = 0.57 -raft_margin = 15 -raft_surface_line_width = 0.5 retraction_count_max = 15 retraction_hop_enabled = 0.2 speed_layer_0 = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg index faceaf67a1..7cb72ef3e0 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -17,11 +17,7 @@ cool_min_speed = 12 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.15 retraction_min_travel = 5 skin_overlap = 50 speed_print = 70 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index b5a4c80051..6e23de0aa7 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -27,7 +27,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg index ab002594f4..babf6f1306 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -19,11 +19,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.25 skin_overlap = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg index 289f90587e..cbf61a838f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -19,11 +19,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.25 skin_overlap = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg index b3598f8851..31e1d559f3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg @@ -18,11 +18,7 @@ cool_min_speed = 15 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.25 skin_overlap = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg index f6dcbe9b2c..761ab7d56d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -18,11 +18,7 @@ cool_min_speed = 12 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.25 skin_overlap = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index 3864b870a8..8627ccd4a3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -35,7 +35,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 1d7c0a6bba..1119e3e7ac 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -33,7 +33,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index df9575fdc4..5cfe7b7d62 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -35,7 +35,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 4f1ce35e5a..8f471a9507 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -32,7 +32,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index 5013bcb3f8..a171427548 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -19,11 +19,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 prime_tower_enable = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index fb59a2aa76..e80a6c73fd 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -20,11 +20,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 prime_tower_enable = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 23587d6a81..a2ca3a769f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -20,11 +20,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 prime_tower_enable = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg index df89b2769b..4480855c43 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg @@ -18,7 +18,6 @@ cool_fan_full_at_height = =layer_height_0 + 14 * layer_height material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 -raft_margin = 15 skin_overlap = 0 speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index 0532884c0e..757c716dad 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 7 * layer_height layer_height = 0.4 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 -raft_margin = 15 skin_overlap = 0 speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg index 91f11ad52a..a8e3d3a957 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -20,7 +20,6 @@ layer_height = 0.3 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 -raft_margin = 15 skin_overlap = 0 speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index ec31d9bd7f..137e93d019 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True -raft_margin = 10 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index c155549106..7595124338 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False -raft_margin = 10 speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg index d43a422dac..4e2114909a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -17,11 +17,7 @@ cool_min_speed = 12 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_min_travel = 5 skin_overlap = 50 speed_print = 70 @@ -30,6 +26,4 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - -raft_surface_speed = 45 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index a4c6e356d1..705b63ad02 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -26,7 +26,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index c8927b8ab0..a0c909af75 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -18,15 +18,10 @@ material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index 1d05299c40..58b6f80f5d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -18,15 +18,10 @@ material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index 139bb7095a..0dd7ec5a0d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -17,15 +17,10 @@ cool_min_speed = 15 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index 2b0c07adaf..8f17f79616 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -17,15 +17,10 @@ cool_min_speed = 12 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index 4a598829bb..c34bf1bfde 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -32,7 +32,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index 89c557e52f..6e115a9c37 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -31,7 +31,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 3662eaa22c..b3f3aa6cd0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -33,7 +33,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 17f5f6c4e5..eaf031fe52 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -31,7 +31,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index 2b12e3380b..d20c1303b8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -34,5 +34,5 @@ top_bottom_thickness = 0.9 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -raft_airgap = =0.25 +raft_airgap = 0.25 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index 1b508e3a23..2d05a15f3c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -34,5 +34,5 @@ top_bottom_thickness = 1.2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -raft_airgap = =0.25 +raft_airgap = 0.25 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg index 0f436de811..09de59ba20 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -21,11 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 prime_tower_enable = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg index b7a36e6c71..d6e11ca953 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -21,11 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 prime_tower_enable = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 15d2fc250f..599789f528 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -21,11 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 prime_tower_enable = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg index 27c05bc0c6..61d0cc5109 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg @@ -20,7 +20,6 @@ cool_fan_full_at_height = =layer_height_0 + 14 * layer_height material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 -raft_margin = 15 skin_overlap = 0 speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg index 8182ee03e2..f441c0acac 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 7 * layer_height material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 -raft_margin = 15 skin_overlap = 0 speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg index 0bbc14ae81..a044987670 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -20,7 +20,6 @@ cool_fan_full_at_height = =layer_height_0 + 9 * layer_height material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 -raft_margin = 15 skin_overlap = 0 speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index 6abb19ad5f..a2e863cb8d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -22,7 +22,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True -raft_margin = 10 support_angle = 70 top_bottom_thickness = =layer_height * 4 speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 1dc6c7c64b..3b47b687ab 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False -raft_margin = 10 speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg index 3a096ba06c..b06a514334 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -18,11 +18,7 @@ cool_min_speed = 12 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.15 retraction_min_travel = 5 skin_overlap = 50 speed_print = 70 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index 26eb1342ab..abb891489e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -26,7 +26,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index 8ac7ded1f8..f0ced52d33 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -18,15 +18,10 @@ material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index fcfc47a3d9..90fd37a5fb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -18,15 +18,10 @@ material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index f993cb0483..c6a9e2b017 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -17,15 +17,10 @@ cool_min_speed = 15 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index 6f96a284f3..0b0ea1fb9f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -17,15 +17,10 @@ cool_min_speed = 12 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 raft_airgap = 0.4 -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index dfccfecf19..d2926843a6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -32,7 +32,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index c0f36fce86..3fa9480c24 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -31,7 +31,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index ecc60d1d31..e574b8cca5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -32,7 +32,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index 6a49d75a60..4103986e65 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -30,7 +30,6 @@ ooze_shield_angle = 40 prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 -raft_interface_thickness = =max(layer_height * 1.5, 0.225) retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg index 3b20559564..962f906e74 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -35,5 +35,5 @@ top_bottom_thickness = 0.9 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -raft_airgap = =0.25 +raft_airgap = 0.25 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg index bfb76f20c8..5150537256 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -34,5 +34,5 @@ top_bottom_thickness = 1.2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -raft_airgap = =0.25 +raft_airgap = 0.25 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg index b7d767a40b..addfe52641 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg @@ -19,11 +19,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 prime_tower_enable = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg index 23b93082f6..aec980aa48 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -19,11 +19,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 prime_tower_enable = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg index a12ef5caf3..fc9d586503 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -21,11 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 prime_tower_enable = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg index 8c762a2286..30877bf726 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg @@ -20,7 +20,6 @@ cool_fan_full_at_height = =layer_height_0 + 14 * layer_height material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 -raft_margin = 15 skin_overlap = 0 speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index b5b54af8ea..fd3ae94a9e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 7 * layer_height material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 -raft_margin = 15 skin_overlap = 0 speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg index 87f2af5e8f..6fe4bd5999 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg @@ -18,7 +18,6 @@ cool_fan_full_at_height = =layer_height_0 + 9 * layer_height material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 -raft_margin = 15 skin_overlap = 0 speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 5fd1ac1591..7f1cf80f12 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -22,7 +22,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True -raft_margin = 10 support_angle = 70 top_bottom_thickness = =layer_height * 4 speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index 876136d914..b298611623 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False -raft_margin = 10 speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg index 57db85f405..15fc789f66 100644 --- a/resources/variants/ultimaker3_aa0.25.inst.cfg +++ b/resources/variants/ultimaker3_aa0.25.inst.cfg @@ -18,13 +18,6 @@ machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 0.65 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed skin_overlap = 15 diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index 748ed78eb7..4adec1540b 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -30,6 +30,7 @@ material_initial_print_temperature = =material_print_temperature - 5 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True +raft_surface_layers = 1 retraction_amount = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg index 79e00a03d8..c81caf4164 100644 --- a/resources/variants/ultimaker3_aa04.inst.cfg +++ b/resources/variants/ultimaker3_aa04.inst.cfg @@ -13,14 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = AA 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_acceleration = =acceleration_print -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_amount = 6.5 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index fb09362b67..fd516c48b2 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -31,16 +31,6 @@ material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = 0 -raft_base_speed = 20 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.5 -raft_interface_line_width = 0.5 -raft_interface_speed = 20 -raft_interface_thickness = 0.2 -raft_margin = 10 -raft_speed = 25 raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index 49837e24ea..05e91d0752 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -17,9 +17,6 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 retraction_min_travel = =3 * line_width speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg index ae232b2209..e6a9abfe1e 100644 --- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg @@ -18,13 +18,6 @@ machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 0.65 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed skin_overlap = 15 diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index 96a34c059e..a215c4f455 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -30,6 +30,7 @@ material_initial_print_temperature = =material_print_temperature - 5 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True +raft_surface_layers = 1 retraction_amount = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg index 5a3994a4f0..be07b56cdc 100644 --- a/resources/variants/ultimaker3_extended_aa04.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg @@ -13,14 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = AA 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_acceleration = =acceleration_print -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_amount = 6.5 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index b1317d77f5..e052df63eb 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -31,16 +31,6 @@ material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = 0 -raft_base_speed = 20 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.5 -raft_interface_line_width = 0.5 -raft_interface_speed = 20 -raft_interface_thickness = 0.2 -raft_margin = 10 -raft_speed = 25 raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg index 94a687c951..69968e721e 100644 --- a/resources/variants/ultimaker3_extended_bb04.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg @@ -17,9 +17,6 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 retraction_min_travel = =3 * line_width speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg index c781037a09..059f3ece2f 100644 --- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg @@ -18,14 +18,6 @@ machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 0.65 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 - retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed skin_overlap = 15 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index 3e4f3156af..6e477f15e6 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -30,6 +30,7 @@ material_initial_print_temperature = =material_print_temperature - 5 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True +raft_surface_layers = 1 retraction_amount = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg index 4fe8c7d66f..fb995635ff 100644 --- a/resources/variants/ultimaker_s3_aa04.inst.cfg +++ b/resources/variants/ultimaker_s3_aa04.inst.cfg @@ -13,14 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = AA 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_acceleration = =acceleration_print -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_amount = 6.5 retraction_min_travel = =line_width * 2 skin_overlap = 15 diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 123386d1b3..0305245e08 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -30,16 +30,6 @@ material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = 0 -raft_base_speed = 20 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.5 -raft_interface_line_width = 0.5 -raft_interface_speed = 20 -raft_interface_thickness = 0.2 -raft_margin = 10 -raft_speed = 25 raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg index 526f724eea..9c18713818 100644 --- a/resources/variants/ultimaker_s3_bb04.inst.cfg +++ b/resources/variants/ultimaker_s3_bb04.inst.cfg @@ -17,9 +17,6 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 retraction_min_travel = =3 * line_width speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg index 4930152e81..0c22958955 100644 --- a/resources/variants/ultimaker_s3_cc04.inst.cfg +++ b/resources/variants/ultimaker_s3_cc04.inst.cfg @@ -13,14 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.4 machine_nozzle_size = 0.4 -raft_acceleration = =acceleration_print -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg index 08bfd09353..caa1616d4d 100644 --- a/resources/variants/ultimaker_s3_cc06.inst.cfg +++ b/resources/variants/ultimaker_s3_cc06.inst.cfg @@ -13,14 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.6 machine_nozzle_size = 0.6 -raft_acceleration = =acceleration_print -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg index c423779b1e..3b9d08b278 100644 --- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg @@ -18,13 +18,6 @@ machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 0.65 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed skin_overlap = 15 diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index 78e6f55104..4433739430 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -30,6 +30,7 @@ material_initial_print_temperature = =material_print_temperature - 5 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True +raft_surface_layers = 1 retraction_amount = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg index 781f63d517..4d361e51c8 100644 --- a/resources/variants/ultimaker_s5_aa04.inst.cfg +++ b/resources/variants/ultimaker_s5_aa04.inst.cfg @@ -13,14 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = AA 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_acceleration = =acceleration_print -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_amount = 6.5 retraction_min_travel = =line_width * 2 skin_overlap = 15 diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index acab25be4e..3c2e9d14cb 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -30,16 +30,6 @@ material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = 0 -raft_base_speed = 20 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.5 -raft_interface_line_width = 0.5 -raft_interface_speed = 20 -raft_interface_thickness = 0.2 -raft_margin = 10 -raft_speed = 25 raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg index 18770b1c4d..6e378bbb82 100644 --- a/resources/variants/ultimaker_s5_bb04.inst.cfg +++ b/resources/variants/ultimaker_s5_bb04.inst.cfg @@ -17,9 +17,6 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 retraction_min_travel = =3 * line_width speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg index 35fbf4f174..174a4f7c62 100644 --- a/resources/variants/ultimaker_s5_cc04.inst.cfg +++ b/resources/variants/ultimaker_s5_cc04.inst.cfg @@ -13,14 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.4 machine_nozzle_size = 0.4 -raft_acceleration = =acceleration_print -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg index 9263ad6cc9..e8934377a1 100644 --- a/resources/variants/ultimaker_s5_cc06.inst.cfg +++ b/resources/variants/ultimaker_s5_cc06.inst.cfg @@ -13,14 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.6 machine_nozzle_size = 0.6 -raft_acceleration = =acceleration_print -raft_airgap = 0.3 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -raft_interface_line_width = =line_width * 2 -raft_interface_thickness = =layer_height * 1.5 -raft_margin = 15 -raft_surface_layers = 2 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print |