diff options
| -rw-r--r-- | resources/definitions/key3d_tyro.def.json | 65 | ||||
| -rw-r--r-- | resources/extruders/key3d_tyro_extruder_0.def.json | 16 | ||||
| -rw-r--r-- | resources/quality/key3d/key3d_tyro_best.inst.cfg | 128 | ||||
| -rw-r--r-- | resources/quality/key3d/key3d_tyro_fast.inst.cfg | 127 | ||||
| -rw-r--r-- | resources/quality/key3d/key3d_tyro_normal.inst.cfg | 127 |
5 files changed, 463 insertions, 0 deletions
diff --git a/resources/definitions/key3d_tyro.def.json b/resources/definitions/key3d_tyro.def.json new file mode 100644 index 0000000000..e14f601d7d --- /dev/null +++ b/resources/definitions/key3d_tyro.def.json @@ -0,0 +1,65 @@ +{ + "name": "Tyro", + "version": 2, + "inherits": "fdmprinter", + "metadata": { + "visible": true, + "author": "DragonJe", + "manufacturer": "Key3D", + "file_formats": "text/x-gcode", + "platform_offset": [0, 0, 0], + "has_materials": true, + "has_variants": false, + "preferred_quality_type": "normal", + "has_machine_quality": true, + "preferred_material": "generic_pla", + "machine_extruder_trains": + { + "0": "key3d_tyro_extruder_0" + } + }, + + "overrides": { + "machine_name": { + "default_value": "Tyro" + }, + "machine_width": { + "default_value": 150 + }, + "machine_height": { + "default_value": 150 + }, + "machine_depth": { + "default_value": 150 + }, + "machine_head_polygon": { + "default_value": [ + [-30, 34], + [-30, -32], + [30, -32], + [30, 34] + ] + }, + "gantry_height": { + "value": "30" + }, + "machine_heated_bed": { + "default_value": false + }, + "machine_heated_build_volume": { + "default_value": false + }, + "material_diameter": { + "default_value": 1.75 + }, + "machine_gcode_flavor": { + "default_value": "RepRap (Marlin/Sprinter)" + }, + "machine_start_gcode": { + "default_value": "G28 ; Home\nG1 Z15.0 F6000 ; Move Z axis up 15mm\n ; Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0" + }, + "machine_end_gcode": { + "default_value": "M104 S0\nM140 S0\n ; Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84" + } + } +} diff --git a/resources/extruders/key3d_tyro_extruder_0.def.json b/resources/extruders/key3d_tyro_extruder_0.def.json new file mode 100644 index 0000000000..6d5b83a1ef --- /dev/null +++ b/resources/extruders/key3d_tyro_extruder_0.def.json @@ -0,0 +1,16 @@ +{ + "id": "key3d_tyro_extruder_0", + "version": 2, + "name": "0.4mm Nozzle", + "inherits": "fdmextruder", + "metadata": { + "machine": "Tyro", + "position": "0" + }, + + "overrides": { + "extruder_nr": { "default_value": 0 }, + "machine_nozzle_size": { "default_value": 0.4 }, + "material_diameter": { "default_value": 1.75 } + } +} diff --git a/resources/quality/key3d/key3d_tyro_best.inst.cfg b/resources/quality/key3d/key3d_tyro_best.inst.cfg new file mode 100644 index 0000000000..e5a257f898 --- /dev/null +++ b/resources/quality/key3d/key3d_tyro_best.inst.cfg @@ -0,0 +1,128 @@ +[general] +version = 4 +name = Best Quality +definition = key3d_tyro + +[metadata] +setting_version = 9 +type = quality +quality_type = best +weight = 1 +global_quality = True + +[values] +layer_height = 0.08 +layer_height_0 = 0.24 +line_width = 0.4 +wall_line_width_0 = 0.4 +initial_layer_line_width_factor = 100 +wall_thickness = 0.8 +wall_0_wipe_dist = 0.2 +roofing_layer_count = 1 +top_bottom_thickness = 0.6 +top_thickness = 0.8 +top_layers = 5 +bottom_thickness = 0.6 +bottom_layers = 3 +top_bottom_pattern = lines +top_bottom_pattern_0 = lines +wall_0_inset = 0 +optimize_wall_printing_order = False +outer_inset_first = False +alternate_extra_perimeter = False +travel_compensate_overlapping_walls_enabled = True +travel_compensate_overlapping_walls_0_enabled = True +travel_compensate_overlapping_walls_x_enabled = True +wall_min_flow = 0 +fill_perimeter_gaps = everywhere +filter_out_tiny_gaps = True +fill_outline_gaps = True +xy_offset = 0 +skin_no_small_gaps_heuristic = True +skin_outline_count = 1 +ironing_enabled = False +infill_sparse_density = 20 +zig_zaggify_infill = False +infill_multiplier = 1 +infill_wall_line_count = 0 +infill_overlap = 10 +skin_overlap = 5 +infill_wipe_dist = 0.1 +gradual_infill_steps = 0 +infill_before_walls = False +infill_support_enabled = False +max_skin_angle_for_expansion = 90 +material_diameter = 1.75 +default_material_print_temperature = 220 +material_print_temperature = 220 +material_print_temperature_layer_0 = 220 +material_initial_print_temperature = 220 +material_final_print_temperature = 220 +default_material_bed_temperature = 0 +material_bed_temperature = 0 +build_volume_temperature = 0 +material_flow = 100 +retraction_enable = True +retract_at_layer_change = False +retraction_amount = 5 +retraction_speed = 45 +retraction_extra_prime_amount = 0 +retraction_min_travel = 0.8 +retraction_count_max = 90 +retraction_extrusion_window = 5 +limit_support_retractions = True +switch_extruder_retraction_amount = 16 +switch_extruder_retraction_speeds = 20 +speed_print = 30 +speed_travel = 150 +speed_layer_0 = 10 +speed_travel_layer_0 = 50 +speed_slowdown_layers = 2 +speed_equalize_flow_enabled = False +acceleration_enabled = False +acceleration_roofing = 3000 +jerk_enabled = False +retraction_combing = off +travel_retract_before_outer_wall = False +retraction_hop_enabled = False +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_fan_full_at_height = 0.24 +cool_lift_head = False +support_enable = True +support_type = everywhere +support_angle = 50 +support_pattern = grid +support_wall_count = 0 +zig_zaggify_support = False +support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20 +support_infill_angles = [0] +support_brim_enable = True +support_brim_line_count = 5 +support_z_distance = 0.2 +support_xy_distance = 0.7 +support_xy_distance_overhang = 0.2 +support_bottom_stair_step_height = 0.3 +support_bottom_stair_step_width = 5.0 +support_join_distance = 2.0 +support_offset = 0.2 +gradual_support_infill_steps = 0 +support_roof_enable = True +support_bottom_enable = False +support_roof_height = 0.45 +support_roof_density = 45 +support_roof_pattern = lines +support_fan_enable = False +support_use_towers = True +support_tower_diameter = 3 +support_tower_roof_angle = 65 +adhesion_type = skirt +skirt_line_count = 2 +skirt_gap = 3 +meshfix_union_all = True +meshfix_union_all_remove_holes = False +meshfix_extensive_stitching = False +meshfix_keep_open_polygons = False +multiple_mesh_overlap = 0.16 +carve_multiple_volumes = False diff --git a/resources/quality/key3d/key3d_tyro_fast.inst.cfg b/resources/quality/key3d/key3d_tyro_fast.inst.cfg new file mode 100644 index 0000000000..4ca4a65950 --- /dev/null +++ b/resources/quality/key3d/key3d_tyro_fast.inst.cfg @@ -0,0 +1,127 @@ +[general] +version = 4 +name = Fast Quality +definition = key3d_tyro + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +global_quality = True + +[values] +layer_height = 0.24 +layer_height_0 = 0.24 +line_width = 0.4 +initial_layer_line_width_factor = 100 +wall_thickness = 0.8 +wall_0_wipe_dist = 0.2 +roofing_layer_count = 1 +top_bottom_thickness = 0.6 +top_thickness = 0.8 +top_layers = 5 +bottom_thickness = 0.6 +bottom_layers = 3 +top_bottom_pattern = lines +top_bottom_pattern_0 = lines +wall_0_inset = 0 +optimize_wall_printing_order = False +outer_inset_first = False +alternate_extra_perimeter = False +travel_compensate_overlapping_walls_enabled = True +travel_compensate_overlapping_walls_0_enabled = True +travel_compensate_overlapping_walls_x_enabled = True +wall_min_flow = 0 +fill_perimeter_gaps = everywhere +filter_out_tiny_gaps = True +fill_outline_gaps = True +xy_offset = 0 +skin_no_small_gaps_heuristic = True +skin_outline_count = 1 +ironing_enabled = False +infill_sparse_density = 15 +zig_zaggify_infill = False +infill_multiplier = 1 +infill_wall_line_count = 0 +infill_overlap = 10 +skin_overlap = 5 +infill_wipe_dist = 0.1 +gradual_infill_steps = 0 +infill_before_walls = False +infill_support_enabled = False +max_skin_angle_for_expansion = 90 +material_diameter = 1.75 +default_material_print_temperature = 220 +material_print_temperature = 220 +material_print_temperature_layer_0 = 220 +material_initial_print_temperature = 220 +material_final_print_temperature = 220 +default_material_bed_temperature = 0 +material_bed_temperature = 0 +build_volume_temperature = 0 +material_flow = 100 +retraction_enable = True +retract_at_layer_change = False +retraction_amount = 5 +retraction_speed = 45 +retraction_extra_prime_amount = 0 +retraction_min_travel = 0.8 +retraction_count_max = 90 +retraction_extrusion_window = 5 +limit_support_retractions = True +switch_extruder_retraction_amount = 16 +switch_extruder_retraction_speeds = 20 +speed_print = 60 +speed_travel = 150 +speed_layer_0 = 10 +speed_travel_layer_0 = 50 +speed_slowdown_layers = 2 +speed_equalize_flow_enabled = False +acceleration_enabled = False +acceleration_roofing = 3000 +jerk_enabled = False +retraction_combing = off +travel_retract_before_outer_wall = False +retraction_hop_enabled = False +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_fan_full_at_height = 0.48 +cool_lift_head = False +support_enable = True +support_type = everywhere +support_angle = 50 +support_pattern = grid +support_wall_count = 0 +zig_zaggify_support = False +support_infill_rate = =15 if support_enable else 0 if support_tree_enable else 15 +support_infill_angles = [0] +support_brim_enable = True +support_brim_line_count = 5 +support_z_distance = 0.3 +support_xy_distance = 0.7 +support_xy_distance_overhang = 0.2 +support_bottom_stair_step_height = 0.3 +support_bottom_stair_step_width = 5.0 +support_join_distance = 2.0 +support_offset = 0.2 +gradual_support_infill_steps = 0 +support_roof_enable = True +support_bottom_enable = False +support_roof_height = 0.45 +support_roof_density = 45 +support_roof_pattern = lines +support_fan_enable = False +support_use_towers = True +support_tower_diameter = 3 +support_tower_roof_angle = 65 +adhesion_type = skirt +skirt_line_count = 2 +skirt_gap = 3 +meshfix_union_all = True +meshfix_union_all_remove_holes = False +meshfix_extensive_stitching = False +meshfix_keep_open_polygons = False +multiple_mesh_overlap = 0.16 +carve_multiple_volumes = False diff --git a/resources/quality/key3d/key3d_tyro_normal.inst.cfg b/resources/quality/key3d/key3d_tyro_normal.inst.cfg new file mode 100644 index 0000000000..7f650612ff --- /dev/null +++ b/resources/quality/key3d/key3d_tyro_normal.inst.cfg @@ -0,0 +1,127 @@ +[general] +version = 4 +name = Normal Quality +definition = key3d_tyro + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +global_quality = True + +[values] +layer_height = 0.16 +layer_height_0 = 0.24 +line_width = 0.4 +initial_layer_line_width_factor = 100 +wall_thickness = 0.8 +wall_0_wipe_dist = 0.2 +roofing_layer_count = 1 +top_bottom_thickness = 0.6 +top_thickness = 0.8 +top_layers = 5 +bottom_thickness = 0.6 +bottom_layers = 3 +top_bottom_pattern = lines +top_bottom_pattern_0 = lines +wall_0_inset = 0 +optimize_wall_printing_order = False +outer_inset_first = False +alternate_extra_perimeter = False +travel_compensate_overlapping_walls_enabled = True +travel_compensate_overlapping_walls_0_enabled = True +travel_compensate_overlapping_walls_x_enabled = True +wall_min_flow = 0 +fill_perimeter_gaps = everywhere +filter_out_tiny_gaps = True +fill_outline_gaps = True +xy_offset = 0 +skin_no_small_gaps_heuristic = True +skin_outline_count = 1 +ironing_enabled = False +infill_sparse_density = 20 +zig_zaggify_infill = False +infill_multiplier = 1 +infill_wall_line_count = 0 +infill_overlap = 10 +skin_overlap = 5 +infill_wipe_dist = 0.1 +gradual_infill_steps = 0 +infill_before_walls = False +infill_support_enabled = False +max_skin_angle_for_expansion = 90 +material_diameter = 1.75 +default_material_print_temperature = 220 +material_print_temperature = 220 +material_print_temperature_layer_0 = 220 +material_initial_print_temperature = 220 +material_final_print_temperature = 220 +default_material_bed_temperature = 0 +material_bed_temperature = 0 +build_volume_temperature = 0 +material_flow = 100 +retraction_enable = True +retract_at_layer_change = False +retraction_amount = 5 +retraction_speed = 45 +retraction_extra_prime_amount = 0 +retraction_min_travel = 0.8 +retraction_count_max = 90 +retraction_extrusion_window = 5 +limit_support_retractions = True +switch_extruder_retraction_amount = 16 +switch_extruder_retraction_speeds = 20 +speed_print = 50 +speed_travel = 150 +speed_layer_0 = 10 +speed_travel_layer_0 = 50 +speed_slowdown_layers = 2 +speed_equalize_flow_enabled = False +acceleration_enabled = False +acceleration_roofing = 3000 +jerk_enabled = False +retraction_combing = off +travel_retract_before_outer_wall = False +retraction_hop_enabled = False +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_fan_full_at_height = 0.32 +cool_lift_head = False +support_enable = True +support_type = everywhere +support_angle = 50 +support_pattern = grid +support_wall_count = 0 +zig_zaggify_support = False +support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20 +support_infill_angles = [0] +support_brim_enable = True +support_brim_line_count = 5 +support_z_distance = 0.21 +support_xy_distance = 0.7 +support_xy_distance_overhang = 0.2 +support_bottom_stair_step_height = 0.3 +support_bottom_stair_step_width = 5.0 +support_join_distance = 2.0 +support_offset = 0.2 +gradual_support_infill_steps = 0 +support_roof_enable = True +support_bottom_enable = False +support_roof_height = 0.45 +support_roof_density = 45 +support_roof_pattern = lines +support_fan_enable = False +support_use_towers = True +support_tower_diameter = 3 +support_tower_roof_angle = 65 +adhesion_type = skirt +skirt_line_count = 2 +skirt_gap = 3 +meshfix_union_all = True +meshfix_union_all_remove_holes = False +meshfix_extensive_stitching = False +meshfix_keep_open_polygons = False +multiple_mesh_overlap = 0.16 +carve_multiple_volumes = False |