diff options
124 files changed, 124 insertions, 124 deletions
diff --git a/resources/definitions/ultimaker2_plus_connect.def.json b/resources/definitions/ultimaker2_plus_connect.def.json index 52c9eca861..e802c5a055 100644 --- a/resources/definitions/ultimaker2_plus_connect.def.json +++ b/resources/definitions/ultimaker2_plus_connect.def.json @@ -55,7 +55,7 @@ }, "infill_wipe_dist": { "value": "0" }, "infill_overlap": { "value": "0" }, - "infill_pattern": { "value": "'grid'" }, + "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'grid'" }, "speed_infill": { "value": "speed_print" }, "speed_wall_x": { "value": "speed_wall" }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 4743d1b77e..197bfa4513 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -97,7 +97,7 @@ "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, "infill_overlap": { "value": "0" }, - "infill_pattern": { "value": "'triangles'" }, + "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" }, "infill_wipe_dist": { "value": "0" }, "initial_layer_line_width_factor": { "value": "120" }, "jerk_enabled": { "value": "True" }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index 17531c66a4..6ecf2fe848 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -90,7 +90,7 @@ "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, "infill_overlap": { "value": "0" }, - "infill_pattern": { "value": "'triangles'" }, + "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" }, "infill_wipe_dist": { "value": "0" }, "jerk_enabled": { "value": "True" }, "jerk_print": { "value": "20", "minimum_value_warning": 20 }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index d4ba3781f2..ea58cfef33 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -92,7 +92,7 @@ "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, "infill_overlap": { "value": "0" }, - "infill_pattern": { "value": "'triangles'" }, + "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" }, "infill_wipe_dist": { "value": "0" }, "jerk_enabled": { "value": "True" }, "jerk_print": { "value": "20", "minimum_value_warning": 20 }, diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg index 9a8c33f1ee..54168650e6 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index 4e0e26b76f..86998318ad 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index 8de69298cc..79333e70c5 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg index c2aa1f68be..8c97f720d5 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index 23931ba527..6512c9e064 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg index 9f8df82d07..d3404eda03 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg index df39f5c02c..3b83a07935 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg index de16d949ea..86f6738c41 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg index 65851adf80..bb65c7f3f4 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg index 90ff15eab9..c250c87873 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg index 70f4044233..06ed1144ce 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg index 6a4e5b609d..4eff1e7d96 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg @@ -27,7 +27,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0 jerk_enabled = True jerk_layer_0 = =jerk_topbottom diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index 066748c369..fa767712df 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg index 6dfd45a179..99d2ab479f 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 10 infill_overlap = 10 -infill_pattern = grid +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index 31d15a9ba6..50286e7505 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg index 9c72b7d858..d6b30b75d6 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 infill_overlap = 10 -infill_pattern = grid +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 26eebe8b28..ebc1ef3d84 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.4 cool_fan_speed_max = 80 cool_min_speed = 5 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index 8a51169cf7..7defd639d9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.4 cool_fan_speed_max = 80 cool_min_speed = 6 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 86fe20b481..ed7dc37a59 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.4 cool_fan_speed_max = 50 cool_min_speed = 5 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index f85759369f..5abb681436 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.4 cool_fan_speed_max = 50 cool_min_speed = 7 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index a292c2cca4..1243fa8939 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -21,7 +21,7 @@ cool_min_speed = 6 infill_overlap = 0 infill_overlap_mm = 0.05 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index f8d1c87f76..dcb739ae67 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 infill_overlap_mm = 0.05 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 4bb729fc4f..c53f8b5c24 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -21,7 +21,7 @@ cool_min_speed = 8 infill_overlap = 0 infill_overlap_mm = 0.05 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 9e42621db6..0a75c8c5c2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 38a1fa60f9..733327bc92 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index e5d7a502f3..6ac30103a4 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index 60be6bd2e8..e8c3e15b66 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 3d07077c9c..fc8c6c7a2f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height infill_overlap = 0 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 57eef897b5..05d44a128b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height infill_overlap = 0 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index aadcf96ce5..4c147484b7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height infill_overlap = 0 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index e00a21d571..3c1967d183 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index bd38700ecf..e6c095066e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' layer_height = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index cccba67fd0..e309d1c5ba 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' layer_height = 0.3 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 1bbea03616..0bf4cfb827 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 47c4011482..b55743a937 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index dbe0811abf..bad0e04203 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' layer_height = 0.3 material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index 4a8c9c3f91..e63f7c5c04 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 91344347da..e2010e4a66 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index dffdbf28a6..28b1b4c24a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index d09ba83563..2569a3f020 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 8776914cc8..e624166893 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 layer_height = 0.4 machine_nozzle_cool_down_speed = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 47893ec0f5..863c8ec5fb 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 layer_height = 0.3 machine_nozzle_cool_down_speed = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index b19a7b9c7d..641bdd571c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg index a59c20671b..f6e5c9cf22 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 10 infill_overlap = 10 -infill_pattern = grid +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index a097d692dd..993d991c6b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg index a03260d3e8..3c4ec47a93 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 infill_overlap = 10 -infill_pattern = grid +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg index 22b4221200..8a05a157a0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg @@ -25,5 +25,5 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 45) wall_thickness = 1 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg index f866887fa6..1e006df819 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg @@ -23,5 +23,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg index 17c7aefbe0..8a41cf3000 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg @@ -24,5 +24,5 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 40 / 50)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg index 51d8b48e8f..0d55ae33c9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -22,5 +22,5 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 45 / 55)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index adf6786e83..c436f90396 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -21,7 +21,7 @@ cool_min_speed = 6 infill_overlap = 0 infill_overlap_mm = 0.05 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index 5ae2735f2d..ecc0503942 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 infill_overlap_mm = 0.05 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 5085510594..670b5f4b5a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -21,7 +21,7 @@ cool_min_speed = 8 infill_overlap = 0 infill_overlap_mm = 0.05 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 68c9a1bbec..6f78d5c2e1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg index b40410ce2c..3f244a6a05 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg @@ -25,6 +25,6 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 45) wall_thickness = 1 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg index 72806c0c70..28a69018a6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg @@ -23,6 +23,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg index 0d759cd75c..f0cc17f2c2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg @@ -24,6 +24,6 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 40 / 50) initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg index c06d19927e..9e7f66c7a1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg @@ -23,6 +23,6 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 45 / 55) initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index 6142412e33..457a5e7048 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index e29f83ed8e..8399c9e3f4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -18,7 +18,7 @@ cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index cd8db42a37..3156a38f37 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index b985c97b11..d8fe3cb58a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height infill_overlap = 0 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 03a7c8fae4..78759eae16 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height infill_overlap = 0 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index 482fc42161..353c01e17c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height infill_overlap = 0 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index 015caff1ff..88d965fcf9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index bb724a9b8a..2d635e2c35 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 2a04dba7c7..51ac6ad64a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg index 26585acf60..15b1d875dc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 32eb10ae89..07c0bdb58a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg index d92ee73bb1..d65a461c96 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index 2ec968ea87..0bf963d44e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index 6aa82ee22d..b156045b2d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index 7f71f93e71..87ef9a56f0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index ed376310c0..1d97708149 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index 69d0d5274b..9c77d90987 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index cb8264338f..5d7b4371b0 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index 3bde0b6e99..e9fde09fb8 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index 5b33819817..b662dfe9de 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg index e4326a7d0f..270426e15e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 10 infill_overlap = 10 -infill_pattern = grid +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index d8b9738910..a94843a385 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg index cf07723ce3..2091d02131 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 infill_overlap = 10 -infill_pattern = grid +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg index 9eeecb02cc..d57409166b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg @@ -27,5 +27,5 @@ top_thickness = =0.8 if infill_sparse_density < 30 and skin_edge_support_thickne wall_thickness = 1 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg index ae27c7aea2..71deb653ce 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg @@ -23,5 +23,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg index d33797ae1e..c69d139a06 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg @@ -24,5 +24,5 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 40 / 50)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg index fa9bc0f509..34f95b7595 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg @@ -22,5 +22,5 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 45 / 55)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index 85596210a6..0c93e68cdd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 infill_overlap = 0 infill_overlap_mm = 0.05 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 7efa54f778..15c687ab2f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 infill_overlap_mm = 0.05 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index efd031273b..0559de104a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -21,7 +21,7 @@ cool_min_speed = 8 infill_overlap = 0 infill_overlap_mm = 0.05 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index 327c2e81c4..79c79ef74a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg index 0623118a07..1c2a7e2718 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -26,6 +26,6 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_thickness = =0.8 if infill_sparse_density < 30 and skin_edge_support_thickness == 0.8 else top_bottom_thickness wall_thickness = 1 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg index bb667d7f4f..d3ad0982b9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg @@ -23,6 +23,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) initial_layer_line_width_factor = 100
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg index d43e8c813a..0329f8ffe9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg @@ -24,6 +24,6 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 40 / 50) initial_layer_line_width_factor = 100
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg index 7f718a80c2..efd9bf189d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg @@ -22,6 +22,6 @@ speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 45 / 55) initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index 666382da2b..a130406172 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index f503800a2f..03d130e346 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index 80f1d5c522..7e3676027c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 infill_overlap = 0 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 9fb1c609a5..172df0a0d6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height infill_overlap = 0 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index 1877d2b85d..2586d6aba7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height infill_overlap = 0 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 15956837e7..315777badf 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height infill_overlap = 0 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index fb9bcea934..caac80af08 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 80ffd5fc0a..6a4706cd8a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index 38c806cdd6..6e117c3fa3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_pattern = tetrahedral +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg index 0b2e183947..761e216305 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index 74b6765685..283504f7fd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg index 0d90fa543f..d443f3132e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = cubic +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index 76c06ae548..0fb63c2f0f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index befe6e95d1..1f7be34d0a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 16a986e76b..1734769099 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_pattern = cross_3d +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index abbcd3a747..705b785d38 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index 06cfa6e6c5..866a348591 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index 058aecc495..542ae63881 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index b12afe0366..807d873b13 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index ca67595946..9d9a7fb7e5 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -15,7 +15,7 @@ cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 18ba4e6f84..434b0bbc69 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -20,7 +20,7 @@ cool_min_speed = 5 gradual_support_infill_step_height = 1.6 gradual_support_infill_steps = 2 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index f84e70c019..93b8ac5a7f 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -15,7 +15,7 @@ cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index aa1531c1e1..920ff8be98 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -20,7 +20,7 @@ cool_min_speed = 5 gradual_support_infill_step_height = 1.6 gradual_support_infill_steps = 2 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index 2f76adb002..0b3a5bac8e 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -15,7 +15,7 @@ cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index e7e923f16c..d5d402c9c1 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 5 gradual_support_infill_step_height = 1.6 gradual_support_infill_steps = 2 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index 8b0edc4031..bc0008b4f6 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -15,7 +15,7 @@ cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index d9744f944a..5e13415f62 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -19,7 +19,7 @@ cool_min_speed = 5 gradual_support_infill_step_height = 1.6 gradual_support_infill_steps = 2 infill_overlap = 0 -infill_pattern = triangles +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 |