diff options
61 files changed, 75 insertions, 58 deletions
diff --git a/resources/definitions/ultimaker2.def.json b/resources/definitions/ultimaker2.def.json index c028363239..9891ec6a43 100644 --- a/resources/definitions/ultimaker2.def.json +++ b/resources/definitions/ultimaker2.def.json @@ -86,6 +86,18 @@ }, "machine_acceleration": { "default_value": 3000 + }, + "infill_before_walls": { + "value": "False" + }, + "top_bottom_pattern": { + "value": "zigzag" + }, + "roofing_layer_count": { + "value": "1" + }, + "roofing_monotonic": { + "value": "True" } } } diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index c30ec98a14..b51c7b5f1a 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -96,6 +96,7 @@ "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, + "infill_before_walls": { "value": "False" }, "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'triangles'" }, @@ -139,6 +140,8 @@ "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, + "roofing_layer_count": { "value": "1" }, + "roofing_monotonic": { "value": "True" }, "skin_overlap": { "value": "10" }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, @@ -158,6 +161,7 @@ "support_z_distance": { "value": "0" }, "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, + "top_bottom_pattern": { "value": "zigzag" }, "top_bottom_thickness": { "value": "1" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index ee3e920a29..d593bbc28e 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -89,6 +89,7 @@ "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, + "infill_before_walls": { "value": "False" }, "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'triangles'" }, @@ -130,6 +131,8 @@ "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, + "roofing_layer_count": { "value": "1" }, + "roofing_monotonic": { "value": "True" }, "skin_overlap": { "value": "10" }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, @@ -148,6 +151,7 @@ "support_z_distance": { "value": "0" }, "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, + "top_bottom_pattern": { "value": "zigzag" }, "top_bottom_thickness": { "value": "1" }, "travel_avoid_supports": { "value": "True" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index 0083168988..2423d02141 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -91,6 +91,7 @@ "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, + "infill_before_walls": { "value": "False" }, "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'triangles'" }, @@ -132,7 +133,9 @@ "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, - "skin_overlap": { "value": "10" }, + "roofing_layer_count": { "value": "1" }, + "roofing_monotonic": { "value": "True" }, + "skin_overlap",: { "value": "10" }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, @@ -150,6 +153,7 @@ "support_z_distance": { "value": "0" }, "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, + "top_bottom_pattern": { "value": "zigzag" }, "top_bottom_thickness": { "value": "1" }, "travel_avoid_supports": { "value": "True" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index 0fad63ae83..c1f5edfa46 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 0409bdba5b..8070aa5604 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True + layer_height = 0.4 line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index f86400bf42..4dd08b9b78 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True + layer_height = 0.3 line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index fc6a48a2f0..547cc0fa4a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True + infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 6158e3ac41..612ff139f0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True + infill_line_width = =line_width layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 3a6f021688..5fbf5c06f3 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True + infill_line_width = =line_width layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg index 0a88fa2f14..a8a473566c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index a12ad9d3c7..349cc6ffef 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True + layer_height = 0.4 line_width = =machine_nozzle_size * 0.875 material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg index ea519e8ce2..489a71ca73 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True + layer_height = 0.3 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 456c3381c9..b772b7450c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index f56455517d..2a6a0286e8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 01354446c4..e73b964e51 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index fa31602dc8..4f0f1df348 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index ab697e5487..eeac6e0063 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 9ab587c1c4..7a23352c58 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg index ef2cce367c..493ca436a2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,5 +19,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 wall_thickness = 0.92 initial_layer_line_width_factor = 100 -infill_before_walls = true + material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg index f04c84f8bd..0dd0a53eb0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg index a229a4c0af..1b1e52033b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg index b5df637996..3dd94709ee 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg index 2c87b43a3f..9a98be3135 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True + infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 8f1588d6aa..3f0b9e0e06 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True + infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 533845be93..1f43d241d3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True + infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg index c5e359aaf3..6bdb14bdf5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg index 513161bb05..c3af9333f1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.875 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg index 5d9fa4f2da..b529b956ec 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg index 2683dafad5..8f6026e176 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -24,4 +24,3 @@ speed_wall = =math.ceil(speed_print * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index ef23481606..fab71760d3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -25,4 +25,3 @@ speed_wall_0 = =math.ceil(speed_wall * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg index e29efed202..cbb178b2dd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -25,4 +25,4 @@ jerk_travel = 50 cool_fan_speed = 20 layer_height_0 = 0.27 initial_layer_line_width_factor = 100 -infill_before_walls = true + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index c02b61f9cc..d7d5ff32bf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index 19ad60d6b3..19bf973154 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index e84a2c753b..a5c6902c9f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index 97cb06d3f7..023851dded 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index 2357faa842..82fa45fbd3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index 143e41d1d4..dfed86dfa0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg index c4d7fb98b9..5e02fba901 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,5 +19,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 wall_thickness = 0.92 initial_layer_line_width_factor = 100 -infill_before_walls = true + material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg index 5b41601923..8ffd11928e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index 05b4f49595..abc87da36d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg index 9c89019c81..5237ea6eab 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg index e6d76ed573..4459b7079e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True + infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg index 2e197f246a..d01339c2e8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True + infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg index 2443b0dd45..d951b5ecf0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True + infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg index e95d4fc943..53e1f3e8aa 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index 8aadea2b82..9c72305acb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.875 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg index edbf13c609..109cb8b6c9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True + line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg index 138cb73cae..8b1a944e35 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -24,4 +24,3 @@ speed_wall = =math.ceil(speed_print * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index 7635f1f64f..ab045702e2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -25,4 +25,4 @@ speed_wall_0 = =math.ceil(speed_wall * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg index 4aa2619fec..f22772f612 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -24,4 +24,4 @@ speed_wall = =math.ceil(speed_print * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index 11a00e7466..fe77ed6928 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 2f1d841329..2397c882fb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index cc6c666d45..8f4ca7e088 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index 3592e721d7..b228d5453b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 460dd06716..07778d66f0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 49aef7edde..edf361e7e3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True + infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index 6aed4b1922..ebedfcb5bf 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -14,7 +14,6 @@ cool_fan_speed = 7 cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 -infill_before_walls = False infill_line_width = =round(line_width * 0.6 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index 14c32fc302..aa4a19821d 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -14,7 +14,6 @@ cool_fan_speed = 7 cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 -infill_before_walls = False infill_line_width = =round(line_width * 0.6 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index d439893b5e..450f27eea1 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -14,7 +14,6 @@ cool_fan_speed = 7 cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 -infill_before_walls = False infill_line_width = =round(line_width * 0.6 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index 0a1f125074..6107e0e19c 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -14,7 +14,6 @@ cool_fan_speed = 7 cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 -infill_before_walls = False infill_line_width = =round(line_width * 0.6 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles |