diff options
698 files changed, 974 insertions, 1517 deletions
diff --git a/resources/definitions/crazy3dprint_cz_300.def.json b/resources/definitions/crazy3dprint_cz_300.def.json index b6bf2061e9..494277c3fc 100644 --- a/resources/definitions/crazy3dprint_cz_300.def.json +++ b/resources/definitions/crazy3dprint_cz_300.def.json @@ -1,5 +1,5 @@ { - "version": 2, + "version": 2, "name": "Crazy3DPrint CZ-300", "inherits": "crazy3dprint_base", "metadata": { @@ -52,9 +52,9 @@ "skirt_line_count": { "default_value" : 5 }, "initial_layer_line_width_factor": { "default_value" : 140 }, "top_bottom_pattern": { "default_value" : "concentric" }, - "outer_inset_first": { "default_value": true }, "fill_outline_gaps": { "default_value": true }, "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, + "inset_direction": {"value": "'outside_in'" }, "machine_start_gcode": { "default_value": "G28 ; home all axes\nG1 Z15 F5000 ; lift nozzle\nG92 E0\nG1 F200 E3\n" }, diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 1459336c5a..27e0d61126 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -1156,9 +1156,9 @@ "description": "When transitioning between different numbers of walls as the part becomes thinner, two adjacent walls will join together at this angle. This can make the walls come together faster than what the Wall Transition Length indicates, filling the space better.", "type": "float", "unit": "°", - "default_value": 30, + "default_value": 10, "minimum_value": "1", - "minimum_value_warning": "15", + "minimum_value_warning": "5", "maximum_value_warning": "50", "maximum_value": "59" }, @@ -1218,7 +1218,7 @@ "outside_in": "Outside To Inside", "center_last": "Center Last" }, - "default_value": "inside_out", + "default_value": "center_last", "settable_per_mesh": true }, "alternate_extra_perimeter": diff --git a/resources/definitions/goofoo_base.def.json b/resources/definitions/goofoo_base.def.json index a305cc3229..67a5a4f4cc 100644 --- a/resources/definitions/goofoo_base.def.json +++ b/resources/definitions/goofoo_base.def.json @@ -84,7 +84,6 @@ "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_final_print_temperature": { "value": "material_print_temperature" }, "material_flow": { "value": 100 }, - "travel_compensate_overlapping_walls_0_enabled": { "value": "False" }, "z_seam_type": { "value": "'back'" }, "z_seam_corner": { "value": "'z_seam_corner_weighted'" }, @@ -97,7 +96,6 @@ "infill_wipe_dist": { "value": 0.0 }, "wall_0_wipe_dist": { "value": 0.0 }, - "fill_perimeter_gaps": { "value": "'everywhere'" }, "fill_outline_gaps": { "value": false }, "filter_out_tiny_gaps": { "value": false }, diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index 47a60fe51c..95c2d11f6d 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -40,6 +40,18 @@ { "value": false, "enabled": false + }, + "fill_outline_gaps": { + "value": "True" + }, + "min_feature_size": { + "value": "wall_line_width_0 / 4" + }, + "min_bead_width": { + "value": "wall_line_width_0 / 2" + }, + "meshfix_maximum_extrusion_area_deviation": { + "value": "50000" } } } diff --git a/resources/definitions/ultimaker2.def.json b/resources/definitions/ultimaker2.def.json index c028363239..df2ec9cab5 100644 --- a/resources/definitions/ultimaker2.def.json +++ b/resources/definitions/ultimaker2.def.json @@ -86,6 +86,21 @@ }, "machine_acceleration": { "default_value": 3000 + }, + "infill_before_walls": { + "value": "False" + }, + "top_bottom_pattern": { + "value": "zigzag" + }, + "roofing_layer_count": { + "value": "1" + }, + "roofing_monotonic": { + "value": "True" + }, + "speed_equalize_flow_width_factor": { + "value": "0.5" } } } diff --git a/resources/definitions/ultimaker2_plus.def.json b/resources/definitions/ultimaker2_plus.def.json index 8250e70104..7c0e81b428 100644 --- a/resources/definitions/ultimaker2_plus.def.json +++ b/resources/definitions/ultimaker2_plus.def.json @@ -35,7 +35,7 @@ "value": "round(machine_nozzle_size / 1.5, 2)" }, "line_width": { - "value": "round(machine_nozzle_size * 0.875, 2)" + "value": "machine_nozzle_size" }, "speed_support": { "value": "speed_wall_0" diff --git a/resources/definitions/ultimaker2_plus_connect.def.json b/resources/definitions/ultimaker2_plus_connect.def.json index c0ddcf813f..695d2385c4 100644 --- a/resources/definitions/ultimaker2_plus_connect.def.json +++ b/resources/definitions/ultimaker2_plus_connect.def.json @@ -59,7 +59,7 @@ "speed_infill": { "value": "speed_print" }, "speed_wall_x": { "value": "speed_wall" }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, - "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" }, + "line_width": { "value": "machine_nozzle_size" }, "optimize_wall_printing_order": { "value": "True" }, "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }, "speed_support": { "value": "speed_wall_0" }, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 46ade6d85b..32d080bc53 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -84,42 +84,47 @@ "acceleration_enabled": { "value": "True" }, "acceleration_layer_0": { "value": "acceleration_topbottom" }, - "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, - "acceleration_print": { "value": "4000" }, - "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, + "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, + "acceleration_print": { "value": "3500" }, + "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, "acceleration_support_interface": { "value": "acceleration_topbottom" }, - "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 500 / 4000)" }, - "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 4000)" }, - "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 500 / 1000)" }, + "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 3500)" }, + "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" }, + "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 3500)" }, "brim_width": { "value": "3" }, "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" }, "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, - "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, + "fill_outline_gaps": { "value": "True" }, + "min_feature_size": { "value": "wall_line_width_0 / 4" }, + "min_bead_width": { "value": "wall_line_width_0 / 2" }, + "infill_before_walls": { "value": "False" }, + "infill_line_width": { "value": "line_width" }, "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'triangles'" }, "infill_wipe_dist": { "value": "0" }, "initial_layer_line_width_factor": { "value": "120" }, "jerk_enabled": { "value": "True" }, "jerk_layer_0": { "value": "jerk_topbottom" }, - "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_prime_tower": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, "jerk_print": { "value": "25" }, - "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_support": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, "jerk_support_interface": { "value": "jerk_topbottom" }, - "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, - "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, - "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, + "jerk_topbottom": { "value": "max(math.ceil(jerk_print * 5 / 25), 20)" }, + "jerk_wall": { "value": "max(math.ceil(jerk_print * 10 / 25), 20" }, + "jerk_wall_0": { "value": "max(math.ceil(jerk_wall * 5 / 10), 20)" }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, - "line_width": { "value": "round(machine_nozzle_size * 0.875, 3)" }, + "line_width": { "value": "machine_nozzle_size" }, "machine_min_cool_heat_time_window": { "value": "15" }, "default_material_print_temperature": { "value": "200" }, "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" }, "material_bed_temperature": { "maximum_value": "115" }, "material_bed_temperature_layer_0": { "maximum_value": "115" }, "material_standby_temperature": { "value": "100" }, + "meshfix_maximum_extrusion_area_deviation": { "value": "50000" }, "multiple_mesh_overlap": { "value": "0" }, "optimize_wall_printing_order": { "value": "True" }, "prime_tower_enable": { "default_value": true }, @@ -139,7 +144,10 @@ "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, + "roofing_layer_count": { "value": "1" }, + "roofing_monotonic": { "value": "True" }, "skin_overlap": { "value": "10" }, + "speed_equalize_flow_width_factor": { "value": "0.5" }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, @@ -158,10 +166,11 @@ "support_z_distance": { "value": "0" }, "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, + "top_bottom_pattern": { "value": "zigzag" }, "top_bottom_thickness": { "value": "1" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, - "wall_line_width_x": { "value": "round(wall_line_width * 0.3 / 0.35, 2)" }, + "wall_line_width_x": { "value": "wall_line_width" }, "wall_thickness": { "value": "1" }, "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" } } diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index 803a36fbb0..cd7587d233 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -77,35 +77,39 @@ "acceleration_enabled": { "value": "True" }, "acceleration_layer_0": { "value": "acceleration_topbottom" }, - "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, - "acceleration_print": { "value": "4000" }, - "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, + "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, + "acceleration_print": { "value": "3500" }, + "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, "acceleration_support_interface": { "value": "acceleration_topbottom" }, - "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 500 / 4000)" }, - "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 4000)" }, - "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 500 / 1000)" }, + "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 3500)" }, + "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" }, + "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" }, "brim_width": { "value": "3" }, "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" }, "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, + "fill_outline_gaps": { "value": "True" }, + "min_feature_size": { "value": "wall_line_width_0 / 4" }, + "min_bead_width": { "value": "wall_line_width_0 / 2" }, + "infill_before_walls": { "value": "False" }, "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'triangles'" }, "infill_wipe_dist": { "value": "0" }, "jerk_enabled": { "value": "True" }, "jerk_layer_0": { "value": "jerk_topbottom" }, - "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_prime_tower": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, "jerk_print": { "value": "25" }, - "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_support": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, "jerk_support_interface": { "value": "jerk_topbottom" }, - "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, - "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, - "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, + "jerk_topbottom": { "value": "max(math.ceil(jerk_print * 5 / 25), 20)" }, + "jerk_wall": { "value": "max(math.ceil(jerk_print * 10 / 25), 20)" }, + "jerk_wall_0": { "value": "max(math.ceil(jerk_wall * 5 / 10), 20)" }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, - "line_width": { "value": "machine_nozzle_size * 0.875" }, + "line_width": { "value": "machine_nozzle_size" }, "machine_min_cool_heat_time_window": { "value": "15" }, "default_material_print_temperature": { "value": "200" }, "material_standby_temperature": { "value": "100" }, @@ -130,7 +134,10 @@ "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, + "roofing_layer_count": { "value": "1" }, + "roofing_monotonic": { "value": "True" }, "skin_overlap": { "value": "10" }, + "speed_equalize_flow_width_factor": { "value": "0.5" }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, @@ -148,6 +155,7 @@ "support_z_distance": { "value": "0" }, "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, + "top_bottom_pattern": { "value": "zigzag" }, "top_bottom_thickness": { "value": "1" }, "travel_avoid_supports": { "value": "True" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, @@ -156,6 +164,7 @@ "wall_thickness": { "value": "1" }, "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" }, "meshfix_maximum_deviation": { "value": "layer_height / 4" }, + "meshfix_maximum_extrusion_area_deviation": { "value": "50000" }, "optimize_wall_printing_order": { "value": "True" }, "retraction_combing": { "default_value": "all" }, "initial_layer_line_width_factor": { "value": "120" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index e684b77489..004734467a 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -79,40 +79,44 @@ "acceleration_enabled": { "value": "True" }, "acceleration_layer_0": { "value": "acceleration_topbottom" }, - "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, - "acceleration_print": { "value": "4000" }, - "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, + "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, + "acceleration_print": { "value": "3500" }, + "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, "acceleration_support_interface": { "value": "acceleration_topbottom" }, - "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 500 / 4000)" }, - "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 4000)" }, - "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 500 / 1000)" }, + "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 3500)" }, + "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" }, + "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" }, "brim_width": { "value": "3" }, "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" }, "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, - "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, + "infill_before_walls": { "value": "False" }, + "infill_line_width": { "value": "line_width" }, "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'triangles'" }, "infill_wipe_dist": { "value": "0" }, "jerk_enabled": { "value": "True" }, "jerk_layer_0": { "value": "jerk_topbottom" }, - "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_prime_tower": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, "jerk_print": { "value": "25" }, - "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_support": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, "jerk_support_interface": { "value": "jerk_topbottom" }, - "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, - "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, - "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, + "jerk_topbottom": { "value": "max(math.ceil(jerk_print * 5 / 25), 20)" }, + "jerk_wall": { "value": "max(math.ceil(jerk_print * 10 / 25), 20)" }, + "jerk_wall_0": { "value": "max(math.ceil(jerk_wall * 5 / 10), 20)" }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, - "line_width": { "value": "machine_nozzle_size * 0.875" }, + "line_width": { "value": "machine_nozzle_size" }, "machine_min_cool_heat_time_window": { "value": "15" }, "default_material_print_temperature": { "value": "200" }, "material_standby_temperature": { "value": "100" }, "multiple_mesh_overlap": { "value": "0" }, "prime_tower_enable": { "value": "True" }, + "fill_outline_gaps": { "value": "True" }, + "min_feature_size": { "value": "wall_line_width_0 / 4" }, + "min_bead_width": { "value": "wall_line_width_0 / 2" }, "raft_airgap": { "value": "0" }, "raft_base_speed": { "value": "20" }, "raft_base_thickness": { "value": "0.3" }, @@ -132,7 +136,10 @@ "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, + "roofing_layer_count": { "value": "1" }, + "roofing_monotonic": { "value": "True" }, "skin_overlap": { "value": "10" }, + "speed_equalize_flow_width_factor": { "value": "0.5" }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, @@ -150,14 +157,16 @@ "support_z_distance": { "value": "0" }, "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, + "top_bottom_pattern": { "value": "zigzag" }, "top_bottom_thickness": { "value": "1" }, "travel_avoid_supports": { "value": "True" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, - "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" }, + "wall_line_width_x": { "value": "line_width" }, "wall_thickness": { "value": "1" }, "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" }, "meshfix_maximum_deviation": { "value": "layer_height / 4" }, + "meshfix_maximum_extrusion_area_deviation": { "value": "50000" }, "optimize_wall_printing_order": { "value": "True" }, "retraction_combing": { "default_value": "all" }, "initial_layer_line_width_factor": { "value": "120" }, diff --git a/resources/definitions/weedo_x40.def.json b/resources/definitions/weedo_x40.def.json index 465edff6b4..6dc45612b1 100644 --- a/resources/definitions/weedo_x40.def.json +++ b/resources/definitions/weedo_x40.def.json @@ -210,7 +210,6 @@ "cool_fan_speed": { "value": "50" },
"cool_fan_speed_max": { "value": "100" },
"cool_min_speed": { "value": "7" },
- "fill_perimeter_gaps": { "value": "'everywhere'" },
"fill_outline_gaps": { "value": false },
"filter_out_tiny_gaps": { "value": false },
"infill_line_width": { "value": "round(line_width * 0.42 / 0.35, 2)" },
@@ -273,7 +272,6 @@ "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
"support_supported_skin_fan_speed": { "value": 100 },
"switch_extruder_retraction_amount": { "value": 0 },
- "travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
"travel_avoid_other_parts": { "value": true },
"travel_retract_before_outer_wall": { "value": true },
"top_bottom_thickness": {"value": "line_width * 2" },
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg index 7e97586beb..4f933f602d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -21,7 +21,7 @@ speed_layer_0 = 20 top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 2 infill_sparse_density = 15 -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -29,5 +29,5 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size -wall_line_width_x = =line_width + + diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg index 5c94008792..69844ef22e 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,6 +29,6 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg index 487927efed..df6998b965 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,6 +29,6 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg index 2cb25077dc..7fccc622eb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_cpe_plus variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index d309be678f..5008397853 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_cpe_plus variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg index baf73a2d4f..1b922d9d1e 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_cpe variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index a2c5a09249..9e0e25aeac 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_cpe variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index 37c32a64ce..576f1aaee6 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_nylon variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index e33656d6c5..ae426f06de 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_nylon variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg index fb2c54fc37..efc78705c6 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_pc variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index b68446176b..0890ca5201 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_pc variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg index 61fcc260d6..19de2fab02 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_petg variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index 61494f64c9..6e27144e3d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_petg variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg index 7f48355caf..9a45659ae3 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg @@ -21,7 +21,7 @@ speed_layer_0 = 20 top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 2 infill_sparse_density = 15 -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -29,5 +29,5 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size -wall_line_width_x = =line_width + + diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index c9b1fce1da..1caa472fbb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_pla variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,6 +29,6 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index 27e5d75f8e..23ee1cfe08 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_pla variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,6 +29,6 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg index 13001cd9b1..ccb7205702 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg @@ -21,7 +21,7 @@ speed_layer_0 = 20 top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 2 infill_sparse_density = 15 -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -29,5 +29,5 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size -wall_line_width_x = =line_width + + diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 70c4c23e16..4dd1bb476a 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_tough_pla variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,6 +29,6 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg index 4c41828898..a4705cda86 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_tough_pla variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,6 +29,6 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg index f7e57e8eb4..bccbe0263f 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -21,7 +21,7 @@ speed_layer_0 = 20 top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 2 infill_sparse_density = 15 -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -29,5 +29,5 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size -wall_line_width_x = =line_width + + diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg index 64403add28..5d1e60edc9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg index 5fdf7d94f0..6a53928921 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg index 573562bac9..52e0ce2516 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_cpe_plus variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index 84a9657f72..ba7fbea46f 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_cpe_plus variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg index ced2e6c176..390ff01efb 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_cpe variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index fb576c43cb..0bb83af365 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_cpe variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index bc5d78af2a..d103242031 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_nylon variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index 32e03e181f..7316db9bf7 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_nylon variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg index c341027a9d..e1e5efcaa4 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_pc variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index 2dfc8ead3a..47f1115d44 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_pc variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg index a08849d786..0f350d9c64 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_petg variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index ddf44a45e8..7205f48955 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_petg variant = AA 0.4
[values]
-infill_line_width = =line_width
+
jerk_print = 30
jerk_infill = =jerk_print
jerk_topbottom = =jerk_print
@@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
jerk_layer_0 = 5
-line_width = =machine_nozzle_size
+
speed_print = 30
speed_infill = =speed_print
speed_layer_0 = 20
@@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
top_bottom_thickness = =wall_thickness
-wall_line_width_x = =line_width
+
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg index 70bf78717f..97d04841b7 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg @@ -21,7 +21,7 @@ speed_layer_0 = 20 top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 2 infill_sparse_density = 15 -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -29,5 +29,5 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size -wall_line_width_x = =line_width + + diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index 2013121b53..dcdf0c8b57 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_pla variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index d04cbb2049..45b607f36f 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_pla variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg index e54132e992..b91b191462 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg @@ -21,7 +21,7 @@ speed_layer_0 = 20 top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 2 infill_sparse_density = 15 -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -29,5 +29,5 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size -wall_line_width_x = =line_width + + diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 85b3898901..6a6d1b7ca8 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_tough_pla variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg index 4b029130b3..0dca019ddc 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg @@ -12,7 +12,7 @@ material = generic_tough_pla variant = AA 0.4 [values] -infill_line_width = =line_width + jerk_print = 30 jerk_infill = =jerk_print jerk_topbottom = =jerk_print @@ -20,7 +20,7 @@ jerk_wall = =jerk_print jerk_wall_0 = =jerk_wall jerk_wall_x = =jerk_wall jerk_layer_0 = 5 -line_width = =machine_nozzle_size + speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 @@ -29,7 +29,7 @@ speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_coarse.inst.cfg b/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_coarse.inst.cfg index f49dc06c24..4eb6af453d 100644 --- a/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_coarse.inst.cfg +++ b/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse material = generic_abs diff --git a/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_draft.inst.cfg b/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_draft.inst.cfg index 1b21687a27..0d506a10c2 100644 --- a/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_draft.inst.cfg +++ b/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = generic_abs diff --git a/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_fine.inst.cfg b/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_fine.inst.cfg index d57712f47d..7f278aee50 100644 --- a/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_fine.inst.cfg +++ b/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = generic_abs diff --git a/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_normal.inst.cfg b/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_normal.inst.cfg index 5d36c508eb..e7216251fd 100644 --- a/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_normal.inst.cfg +++ b/resources/quality/crazy3dprint/abs/crazy3dprint_0.40_abs_normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = generic_abs diff --git a/resources/quality/crazy3dprint/crazy3dprint_global_0.10_fine.inst.cfg b/resources/quality/crazy3dprint/crazy3dprint_global_0.10_fine.inst.cfg index 7faa53bbcc..f3f3da2aec 100644 --- a/resources/quality/crazy3dprint/crazy3dprint_global_0.10_fine.inst.cfg +++ b/resources/quality/crazy3dprint/crazy3dprint_global_0.10_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = 0 diff --git a/resources/quality/crazy3dprint/crazy3dprint_global_0.20_normal.inst.cfg b/resources/quality/crazy3dprint/crazy3dprint_global_0.20_normal.inst.cfg index 0581ff2759..485c408e9e 100644 --- a/resources/quality/crazy3dprint/crazy3dprint_global_0.20_normal.inst.cfg +++ b/resources/quality/crazy3dprint/crazy3dprint_global_0.20_normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = -1 diff --git a/resources/quality/crazy3dprint/crazy3dprint_global_0.30_draft.inst.cfg b/resources/quality/crazy3dprint/crazy3dprint_global_0.30_draft.inst.cfg index f6c4dfbf02..64190d78cf 100644 --- a/resources/quality/crazy3dprint/crazy3dprint_global_0.30_draft.inst.cfg +++ b/resources/quality/crazy3dprint/crazy3dprint_global_0.30_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = -2 diff --git a/resources/quality/crazy3dprint/crazy3dprint_global_0.40_coarse.inst.cfg b/resources/quality/crazy3dprint/crazy3dprint_global_0.40_coarse.inst.cfg index 4f6dcea74c..eb62ac048c 100644 --- a/resources/quality/crazy3dprint/crazy3dprint_global_0.40_coarse.inst.cfg +++ b/resources/quality/crazy3dprint/crazy3dprint_global_0.40_coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = -3 diff --git a/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_coarse.inst.cfg b/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_coarse.inst.cfg index 229d806675..1430fc2470 100644 --- a/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_coarse.inst.cfg +++ b/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse material = generic_pla diff --git a/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_draft.inst.cfg b/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_draft.inst.cfg index e63debcb25..b0c4df4dfb 100644 --- a/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_draft.inst.cfg +++ b/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = generic_pla diff --git a/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_fine.inst.cfg b/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_fine.inst.cfg index cb4e0ec169..8f92e319cb 100644 --- a/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_fine.inst.cfg +++ b/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = generic_pla diff --git a/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_normal.inst.cfg b/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_normal.inst.cfg index 5340570ac9..2417a826fb 100644 --- a/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_normal.inst.cfg +++ b/resources/quality/crazy3dprint/pla/crazy3dprint_0.40_pla_normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal Quality definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = generic_pla diff --git a/resources/quality/flsun_sr/flsun_sr_fine.inst.cfg b/resources/quality/flsun_sr/flsun_sr_fine.inst.cfg index ec1294d30c..69e564effd 100644 --- a/resources/quality/flsun_sr/flsun_sr_fine.inst.cfg +++ b/resources/quality/flsun_sr/flsun_sr_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = flsun_sr [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = 1 @@ -34,8 +34,6 @@ retraction_hop_only_when_collides = True skin_no_small_gaps_heuristic = True skin_overlap = 10 small_hole_max_size = 5 -speed_equalize_flow_enabled = True -speed_equalize_flow_max = 120 speed_support = 80 support_enable = True support_type = everywhere @@ -54,7 +52,6 @@ support_z_distance = 0.2 top_bottom_thickness = =layer_height*7 travel_avoid_other_parts = True travel_avoid_supports = True -travel_compensate_overlapping_walls_enabled = True acceleration_enabled = False jerk_enabled = False infill_pattern = grid diff --git a/resources/quality/flsun_sr/flsun_sr_normal.inst.cfg b/resources/quality/flsun_sr/flsun_sr_normal.inst.cfg index 2c52b9d71e..c79249174b 100644 --- a/resources/quality/flsun_sr/flsun_sr_normal.inst.cfg +++ b/resources/quality/flsun_sr/flsun_sr_normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = flsun_sr [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = -2 @@ -34,8 +34,6 @@ retraction_hop_only_when_collides = True skin_no_small_gaps_heuristic = True skin_overlap = 10 small_hole_max_size = 5 -speed_equalize_flow_enabled = True -speed_equalize_flow_max = 150 speed_support = 80 support_enable = True support_type = everywhere @@ -54,7 +52,6 @@ support_z_distance = 0.2 top_bottom_thickness = =layer_height*5 travel_avoid_other_parts = True travel_avoid_supports = True -travel_compensate_overlapping_walls_enabled = True acceleration_enabled = False jerk_enabled = False infill_pattern = grid diff --git a/resources/quality/goofoo/abs/goofoo_far_0.40_abs_fine.inst.cfg b/resources/quality/goofoo/abs/goofoo_far_0.40_abs_fine.inst.cfg index db98493872..34f82ca058 100644 --- a/resources/quality/goofoo/abs/goofoo_far_0.40_abs_fine.inst.cfg +++ b/resources/quality/goofoo/abs/goofoo_far_0.40_abs_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_abs diff --git a/resources/quality/goofoo/abs/goofoo_far_0.40_abs_standard.inst.cfg b/resources/quality/goofoo/abs/goofoo_far_0.40_abs_standard.inst.cfg index 4dd35ea705..8204490b99 100644 --- a/resources/quality/goofoo/abs/goofoo_far_0.40_abs_standard.inst.cfg +++ b/resources/quality/goofoo/abs/goofoo_far_0.40_abs_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_abs diff --git a/resources/quality/goofoo/abs/goofoo_near_0.40_abs_fine.inst.cfg b/resources/quality/goofoo/abs/goofoo_near_0.40_abs_fine.inst.cfg index 66c043cc26..56e00cd587 100644 --- a/resources/quality/goofoo/abs/goofoo_near_0.40_abs_fine.inst.cfg +++ b/resources/quality/goofoo/abs/goofoo_near_0.40_abs_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_abs diff --git a/resources/quality/goofoo/abs/goofoo_near_0.40_abs_standard.inst.cfg b/resources/quality/goofoo/abs/goofoo_near_0.40_abs_standard.inst.cfg index 8e608e2751..c0e121843c 100644 --- a/resources/quality/goofoo/abs/goofoo_near_0.40_abs_standard.inst.cfg +++ b/resources/quality/goofoo/abs/goofoo_near_0.40_abs_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_abs diff --git a/resources/quality/goofoo/asa/goofoo_far_0.40_asa_fine.inst.cfg b/resources/quality/goofoo/asa/goofoo_far_0.40_asa_fine.inst.cfg index 0722e16b24..c1800cf3ae 100644 --- a/resources/quality/goofoo/asa/goofoo_far_0.40_asa_fine.inst.cfg +++ b/resources/quality/goofoo/asa/goofoo_far_0.40_asa_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_asa diff --git a/resources/quality/goofoo/asa/goofoo_far_0.40_asa_standard.inst.cfg b/resources/quality/goofoo/asa/goofoo_far_0.40_asa_standard.inst.cfg index f358aa16a5..9a07d176dd 100644 --- a/resources/quality/goofoo/asa/goofoo_far_0.40_asa_standard.inst.cfg +++ b/resources/quality/goofoo/asa/goofoo_far_0.40_asa_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_asa diff --git a/resources/quality/goofoo/asa/goofoo_near_0.40_asa_fine.inst.cfg b/resources/quality/goofoo/asa/goofoo_near_0.40_asa_fine.inst.cfg index 10019fa830..aa3d8726a6 100644 --- a/resources/quality/goofoo/asa/goofoo_near_0.40_asa_fine.inst.cfg +++ b/resources/quality/goofoo/asa/goofoo_near_0.40_asa_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_asa diff --git a/resources/quality/goofoo/asa/goofoo_near_0.40_asa_standard.inst.cfg b/resources/quality/goofoo/asa/goofoo_near_0.40_asa_standard.inst.cfg index 60855f3f72..8af87c606c 100644 --- a/resources/quality/goofoo/asa/goofoo_near_0.40_asa_standard.inst.cfg +++ b/resources/quality/goofoo/asa/goofoo_near_0.40_asa_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_asa diff --git a/resources/quality/goofoo/goofoo_far_global_0.15_fine.inst.cfg b/resources/quality/goofoo/goofoo_far_global_0.15_fine.inst.cfg index b5cfa2afe8..a065bd9988 100644 --- a/resources/quality/goofoo/goofoo_far_global_0.15_fine.inst.cfg +++ b/resources/quality/goofoo/goofoo_far_global_0.15_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = -1 diff --git a/resources/quality/goofoo/goofoo_far_global_0.1_efine.inst.cfg b/resources/quality/goofoo/goofoo_far_global_0.1_efine.inst.cfg index 0055d3f330..786c843222 100644 --- a/resources/quality/goofoo/goofoo_far_global_0.1_efine.inst.cfg +++ b/resources/quality/goofoo/goofoo_far_global_0.1_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine weight = 0 diff --git a/resources/quality/goofoo/goofoo_far_global_0.20_standard.inst.cfg b/resources/quality/goofoo/goofoo_far_global_0.20_standard.inst.cfg index dd2984d73c..91670f580f 100644 --- a/resources/quality/goofoo/goofoo_far_global_0.20_standard.inst.cfg +++ b/resources/quality/goofoo/goofoo_far_global_0.20_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = -3 diff --git a/resources/quality/goofoo/goofoo_far_global_0.3_draft.inst.cfg b/resources/quality/goofoo/goofoo_far_global_0.3_draft.inst.cfg index 4ee3ffbb3e..82dce0a92f 100644 --- a/resources/quality/goofoo/goofoo_far_global_0.3_draft.inst.cfg +++ b/resources/quality/goofoo/goofoo_far_global_0.3_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = -2 diff --git a/resources/quality/goofoo/goofoo_near_global_0.15_fine.inst.cfg b/resources/quality/goofoo/goofoo_near_global_0.15_fine.inst.cfg index 2b9312b121..d5a525b513 100644 --- a/resources/quality/goofoo/goofoo_near_global_0.15_fine.inst.cfg +++ b/resources/quality/goofoo/goofoo_near_global_0.15_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = -1 diff --git a/resources/quality/goofoo/goofoo_near_global_0.1_efine.inst.cfg b/resources/quality/goofoo/goofoo_near_global_0.1_efine.inst.cfg index 5b9d88244d..35c73e0c3e 100644 --- a/resources/quality/goofoo/goofoo_near_global_0.1_efine.inst.cfg +++ b/resources/quality/goofoo/goofoo_near_global_0.1_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine weight = 0 diff --git a/resources/quality/goofoo/goofoo_near_global_0.20_standard.inst.cfg b/resources/quality/goofoo/goofoo_near_global_0.20_standard.inst.cfg index 6a30280f67..d2abdf9a3d 100644 --- a/resources/quality/goofoo/goofoo_near_global_0.20_standard.inst.cfg +++ b/resources/quality/goofoo/goofoo_near_global_0.20_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = -3 diff --git a/resources/quality/goofoo/goofoo_near_global_0.3_draft.inst.cfg b/resources/quality/goofoo/goofoo_near_global_0.3_draft.inst.cfg index e3396f5920..0ba10b7233 100644 --- a/resources/quality/goofoo/goofoo_near_global_0.3_draft.inst.cfg +++ b/resources/quality/goofoo/goofoo_near_global_0.3_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = -2 diff --git a/resources/quality/goofoo/goofoo_open_global_0.15_fine.inst.cfg b/resources/quality/goofoo/goofoo_open_global_0.15_fine.inst.cfg index fc4ddff5c8..7c933ddfa0 100644 --- a/resources/quality/goofoo/goofoo_open_global_0.15_fine.inst.cfg +++ b/resources/quality/goofoo/goofoo_open_global_0.15_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = -1 diff --git a/resources/quality/goofoo/goofoo_open_global_0.1_efine.inst.cfg b/resources/quality/goofoo/goofoo_open_global_0.1_efine.inst.cfg index f4a5197592..776905f832 100644 --- a/resources/quality/goofoo/goofoo_open_global_0.1_efine.inst.cfg +++ b/resources/quality/goofoo/goofoo_open_global_0.1_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine weight = 0 diff --git a/resources/quality/goofoo/goofoo_open_global_0.20_standard.inst.cfg b/resources/quality/goofoo/goofoo_open_global_0.20_standard.inst.cfg index fd048b7fdd..14da070d35 100644 --- a/resources/quality/goofoo/goofoo_open_global_0.20_standard.inst.cfg +++ b/resources/quality/goofoo/goofoo_open_global_0.20_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = -3 diff --git a/resources/quality/goofoo/goofoo_open_global_0.3_draft.inst.cfg b/resources/quality/goofoo/goofoo_open_global_0.3_draft.inst.cfg index cb924b3928..b5f516fc35 100644 --- a/resources/quality/goofoo/goofoo_open_global_0.3_draft.inst.cfg +++ b/resources/quality/goofoo/goofoo_open_global_0.3_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = -2 diff --git a/resources/quality/goofoo/goofoo_small_global_0.15_fine.inst.cfg b/resources/quality/goofoo/goofoo_small_global_0.15_fine.inst.cfg index 609b2e6af0..d8e86034b5 100644 --- a/resources/quality/goofoo/goofoo_small_global_0.15_fine.inst.cfg +++ b/resources/quality/goofoo/goofoo_small_global_0.15_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = -1 diff --git a/resources/quality/goofoo/goofoo_small_global_0.1_efine.inst.cfg b/resources/quality/goofoo/goofoo_small_global_0.1_efine.inst.cfg index 1ab043152a..5de0a4038e 100644 --- a/resources/quality/goofoo/goofoo_small_global_0.1_efine.inst.cfg +++ b/resources/quality/goofoo/goofoo_small_global_0.1_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine weight = 0 diff --git a/resources/quality/goofoo/goofoo_small_global_0.20_standard.inst.cfg b/resources/quality/goofoo/goofoo_small_global_0.20_standard.inst.cfg index b775e41fb9..d596473186 100644 --- a/resources/quality/goofoo/goofoo_small_global_0.20_standard.inst.cfg +++ b/resources/quality/goofoo/goofoo_small_global_0.20_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = -3 diff --git a/resources/quality/goofoo/goofoo_small_global_0.3_draft.inst.cfg b/resources/quality/goofoo/goofoo_small_global_0.3_draft.inst.cfg index d4bc9c853c..475f390415 100644 --- a/resources/quality/goofoo/goofoo_small_global_0.3_draft.inst.cfg +++ b/resources/quality/goofoo/goofoo_small_global_0.3_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = -2 diff --git a/resources/quality/goofoo/hips/goofoo_far_0.40_hips_draft.inst.cfg b/resources/quality/goofoo/hips/goofoo_far_0.40_hips_draft.inst.cfg index 8dd4354efa..74119b5e1d 100644 --- a/resources/quality/goofoo/hips/goofoo_far_0.40_hips_draft.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_far_0.40_hips_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_far_0.40_hips_efine.inst.cfg b/resources/quality/goofoo/hips/goofoo_far_0.40_hips_efine.inst.cfg index f9d991474e..2ee0c93c1c 100644 --- a/resources/quality/goofoo/hips/goofoo_far_0.40_hips_efine.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_far_0.40_hips_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_far_0.40_hips_fine.inst.cfg b/resources/quality/goofoo/hips/goofoo_far_0.40_hips_fine.inst.cfg index fe520d21f4..40ae483309 100644 --- a/resources/quality/goofoo/hips/goofoo_far_0.40_hips_fine.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_far_0.40_hips_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_far_0.40_hips_standard.inst.cfg b/resources/quality/goofoo/hips/goofoo_far_0.40_hips_standard.inst.cfg index 3a6ce34d5f..9d638347c6 100644 --- a/resources/quality/goofoo/hips/goofoo_far_0.40_hips_standard.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_far_0.40_hips_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_near_0.40_hips_draft.inst.cfg b/resources/quality/goofoo/hips/goofoo_near_0.40_hips_draft.inst.cfg index 9e94323af2..55314ac1bc 100644 --- a/resources/quality/goofoo/hips/goofoo_near_0.40_hips_draft.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_near_0.40_hips_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_near_0.40_hips_efine.inst.cfg b/resources/quality/goofoo/hips/goofoo_near_0.40_hips_efine.inst.cfg index d4fcbd1ffd..d972a14688 100644 --- a/resources/quality/goofoo/hips/goofoo_near_0.40_hips_efine.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_near_0.40_hips_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_near_0.40_hips_fine.inst.cfg b/resources/quality/goofoo/hips/goofoo_near_0.40_hips_fine.inst.cfg index 2711715ce4..0ffbe084b8 100644 --- a/resources/quality/goofoo/hips/goofoo_near_0.40_hips_fine.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_near_0.40_hips_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_near_0.40_hips_standard.inst.cfg b/resources/quality/goofoo/hips/goofoo_near_0.40_hips_standard.inst.cfg index df9333e1d6..9b3ca13360 100644 --- a/resources/quality/goofoo/hips/goofoo_near_0.40_hips_standard.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_near_0.40_hips_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_open_0.40_hips_draft.inst.cfg b/resources/quality/goofoo/hips/goofoo_open_0.40_hips_draft.inst.cfg index bc41abe93e..f0b869f670 100644 --- a/resources/quality/goofoo/hips/goofoo_open_0.40_hips_draft.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_open_0.40_hips_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_open_0.40_hips_efine.inst.cfg b/resources/quality/goofoo/hips/goofoo_open_0.40_hips_efine.inst.cfg index 7e8ca63eab..c1b559fde5 100644 --- a/resources/quality/goofoo/hips/goofoo_open_0.40_hips_efine.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_open_0.40_hips_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_open_0.40_hips_fine.inst.cfg b/resources/quality/goofoo/hips/goofoo_open_0.40_hips_fine.inst.cfg index 8ec0097c41..cdd7c0bb20 100644 --- a/resources/quality/goofoo/hips/goofoo_open_0.40_hips_fine.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_open_0.40_hips_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_hips diff --git a/resources/quality/goofoo/hips/goofoo_open_0.40_hips_standard.inst.cfg b/resources/quality/goofoo/hips/goofoo_open_0.40_hips_standard.inst.cfg index 502f946b48..478fa481cc 100644 --- a/resources/quality/goofoo/hips/goofoo_open_0.40_hips_standard.inst.cfg +++ b/resources/quality/goofoo/hips/goofoo_open_0.40_hips_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_hips diff --git a/resources/quality/goofoo/pa/goofoo_far_0.40_pa_fine.inst.cfg b/resources/quality/goofoo/pa/goofoo_far_0.40_pa_fine.inst.cfg index 7d427d320f..e745db8ca3 100644 --- a/resources/quality/goofoo/pa/goofoo_far_0.40_pa_fine.inst.cfg +++ b/resources/quality/goofoo/pa/goofoo_far_0.40_pa_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pa diff --git a/resources/quality/goofoo/pa/goofoo_far_0.40_pa_standard.inst.cfg b/resources/quality/goofoo/pa/goofoo_far_0.40_pa_standard.inst.cfg index b62da28e07..b15fe68b31 100644 --- a/resources/quality/goofoo/pa/goofoo_far_0.40_pa_standard.inst.cfg +++ b/resources/quality/goofoo/pa/goofoo_far_0.40_pa_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pa diff --git a/resources/quality/goofoo/pa/goofoo_near_0.40_pa_fine.inst.cfg b/resources/quality/goofoo/pa/goofoo_near_0.40_pa_fine.inst.cfg index d6390b5d47..54d6a5bc40 100644 --- a/resources/quality/goofoo/pa/goofoo_near_0.40_pa_fine.inst.cfg +++ b/resources/quality/goofoo/pa/goofoo_near_0.40_pa_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pa diff --git a/resources/quality/goofoo/pa/goofoo_near_0.40_pa_standard.inst.cfg b/resources/quality/goofoo/pa/goofoo_near_0.40_pa_standard.inst.cfg index 33f01f7900..eb210bbec9 100644 --- a/resources/quality/goofoo/pa/goofoo_near_0.40_pa_standard.inst.cfg +++ b/resources/quality/goofoo/pa/goofoo_near_0.40_pa_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pa diff --git a/resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_fine.inst.cfg b/resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_fine.inst.cfg index 6fe366078a..36c66c39cb 100644 --- a/resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_fine.inst.cfg +++ b/resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pa_cf diff --git a/resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_standard.inst.cfg b/resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_standard.inst.cfg index a8fda496a8..bc6476e001 100644 --- a/resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_standard.inst.cfg +++ b/resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pa_cf diff --git a/resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_fine.inst.cfg b/resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_fine.inst.cfg index 8bdf264189..12fd771a1a 100644 --- a/resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_fine.inst.cfg +++ b/resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pa_cf diff --git a/resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_standard.inst.cfg b/resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_standard.inst.cfg index 82822f7552..57dfc19541 100644 --- a/resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_standard.inst.cfg +++ b/resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pa_cf diff --git a/resources/quality/goofoo/pc/goofoo_far_0.40_pc_draft.inst.cfg b/resources/quality/goofoo/pc/goofoo_far_0.40_pc_draft.inst.cfg index 449249bd1d..935add424b 100644 --- a/resources/quality/goofoo/pc/goofoo_far_0.40_pc_draft.inst.cfg +++ b/resources/quality/goofoo/pc/goofoo_far_0.40_pc_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_pc diff --git a/resources/quality/goofoo/pc/goofoo_far_0.40_pc_efine.inst.cfg b/resources/quality/goofoo/pc/goofoo_far_0.40_pc_efine.inst.cfg index 092500ebe7..9d2fae0100 100644 --- a/resources/quality/goofoo/pc/goofoo_far_0.40_pc_efine.inst.cfg +++ b/resources/quality/goofoo/pc/goofoo_far_0.40_pc_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_pc diff --git a/resources/quality/goofoo/pc/goofoo_far_0.40_pc_fine.inst.cfg b/resources/quality/goofoo/pc/goofoo_far_0.40_pc_fine.inst.cfg index 065568128b..41bc0c3492 100644 --- a/resources/quality/goofoo/pc/goofoo_far_0.40_pc_fine.inst.cfg +++ b/resources/quality/goofoo/pc/goofoo_far_0.40_pc_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pc diff --git a/resources/quality/goofoo/pc/goofoo_far_0.40_pc_standard.inst.cfg b/resources/quality/goofoo/pc/goofoo_far_0.40_pc_standard.inst.cfg index 0d5eb04819..ff56caaeb5 100644 --- a/resources/quality/goofoo/pc/goofoo_far_0.40_pc_standard.inst.cfg +++ b/resources/quality/goofoo/pc/goofoo_far_0.40_pc_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pc diff --git a/resources/quality/goofoo/pc/goofoo_near_0.40_pc_draft.inst.cfg b/resources/quality/goofoo/pc/goofoo_near_0.40_pc_draft.inst.cfg index dbba2c8da9..96b240ea3b 100644 --- a/resources/quality/goofoo/pc/goofoo_near_0.40_pc_draft.inst.cfg +++ b/resources/quality/goofoo/pc/goofoo_near_0.40_pc_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_pc diff --git a/resources/quality/goofoo/pc/goofoo_near_0.40_pc_efine.inst.cfg b/resources/quality/goofoo/pc/goofoo_near_0.40_pc_efine.inst.cfg index 85582e1dbc..20646335fa 100644 --- a/resources/quality/goofoo/pc/goofoo_near_0.40_pc_efine.inst.cfg +++ b/resources/quality/goofoo/pc/goofoo_near_0.40_pc_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_pc diff --git a/resources/quality/goofoo/pc/goofoo_near_0.40_pc_fine.inst.cfg b/resources/quality/goofoo/pc/goofoo_near_0.40_pc_fine.inst.cfg index 1d0d0e277a..77f0c1e8da 100644 --- a/resources/quality/goofoo/pc/goofoo_near_0.40_pc_fine.inst.cfg +++ b/resources/quality/goofoo/pc/goofoo_near_0.40_pc_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pc diff --git a/resources/quality/goofoo/pc/goofoo_near_0.40_pc_standard.inst.cfg b/resources/quality/goofoo/pc/goofoo_near_0.40_pc_standard.inst.cfg index 276b8b8dac..71e4189297 100644 --- a/resources/quality/goofoo/pc/goofoo_near_0.40_pc_standard.inst.cfg +++ b/resources/quality/goofoo/pc/goofoo_near_0.40_pc_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pc diff --git a/resources/quality/goofoo/peek/goofoo_far_0.40_peek_draft.inst.cfg b/resources/quality/goofoo/peek/goofoo_far_0.40_peek_draft.inst.cfg index 9fbab16a7b..21fe9cbd45 100644 --- a/resources/quality/goofoo/peek/goofoo_far_0.40_peek_draft.inst.cfg +++ b/resources/quality/goofoo/peek/goofoo_far_0.40_peek_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_peek diff --git a/resources/quality/goofoo/peek/goofoo_far_0.40_peek_efine.inst.cfg b/resources/quality/goofoo/peek/goofoo_far_0.40_peek_efine.inst.cfg index e492269551..614752b23f 100644 --- a/resources/quality/goofoo/peek/goofoo_far_0.40_peek_efine.inst.cfg +++ b/resources/quality/goofoo/peek/goofoo_far_0.40_peek_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_peek diff --git a/resources/quality/goofoo/peek/goofoo_far_0.40_peek_fine.inst.cfg b/resources/quality/goofoo/peek/goofoo_far_0.40_peek_fine.inst.cfg index f57615f286..4cf4103b6e 100644 --- a/resources/quality/goofoo/peek/goofoo_far_0.40_peek_fine.inst.cfg +++ b/resources/quality/goofoo/peek/goofoo_far_0.40_peek_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_peek diff --git a/resources/quality/goofoo/peek/goofoo_far_0.40_peek_standard.inst.cfg b/resources/quality/goofoo/peek/goofoo_far_0.40_peek_standard.inst.cfg index f4722919e0..6a62d06ba7 100644 --- a/resources/quality/goofoo/peek/goofoo_far_0.40_peek_standard.inst.cfg +++ b/resources/quality/goofoo/peek/goofoo_far_0.40_peek_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_peek diff --git a/resources/quality/goofoo/peek/goofoo_near_0.40_peek_draft.inst.cfg b/resources/quality/goofoo/peek/goofoo_near_0.40_peek_draft.inst.cfg index 3d5e773c47..0b234db653 100644 --- a/resources/quality/goofoo/peek/goofoo_near_0.40_peek_draft.inst.cfg +++ b/resources/quality/goofoo/peek/goofoo_near_0.40_peek_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_peek diff --git a/resources/quality/goofoo/peek/goofoo_near_0.40_peek_efine.inst.cfg b/resources/quality/goofoo/peek/goofoo_near_0.40_peek_efine.inst.cfg index d88e76a0e4..0c3400b61c 100644 --- a/resources/quality/goofoo/peek/goofoo_near_0.40_peek_efine.inst.cfg +++ b/resources/quality/goofoo/peek/goofoo_near_0.40_peek_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_peek diff --git a/resources/quality/goofoo/peek/goofoo_near_0.40_peek_fine.inst.cfg b/resources/quality/goofoo/peek/goofoo_near_0.40_peek_fine.inst.cfg index c797b8e8a1..3496627faf 100644 --- a/resources/quality/goofoo/peek/goofoo_near_0.40_peek_fine.inst.cfg +++ b/resources/quality/goofoo/peek/goofoo_near_0.40_peek_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_peek diff --git a/resources/quality/goofoo/peek/goofoo_near_0.40_peek_standard.inst.cfg b/resources/quality/goofoo/peek/goofoo_near_0.40_peek_standard.inst.cfg index b963833997..9a7bfeb90b 100644 --- a/resources/quality/goofoo/peek/goofoo_near_0.40_peek_standard.inst.cfg +++ b/resources/quality/goofoo/peek/goofoo_near_0.40_peek_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_peek diff --git a/resources/quality/goofoo/petg/goofoo_far_0.40_petg_fine.inst.cfg b/resources/quality/goofoo/petg/goofoo_far_0.40_petg_fine.inst.cfg index b3f5957fd3..f0ed6e0628 100644 --- a/resources/quality/goofoo/petg/goofoo_far_0.40_petg_fine.inst.cfg +++ b/resources/quality/goofoo/petg/goofoo_far_0.40_petg_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_petg diff --git a/resources/quality/goofoo/petg/goofoo_far_0.40_petg_standard.inst.cfg b/resources/quality/goofoo/petg/goofoo_far_0.40_petg_standard.inst.cfg index 2e2477a8b0..80dc71eafc 100644 --- a/resources/quality/goofoo/petg/goofoo_far_0.40_petg_standard.inst.cfg +++ b/resources/quality/goofoo/petg/goofoo_far_0.40_petg_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_petg diff --git a/resources/quality/goofoo/petg/goofoo_near_0.40_petg_fine.inst.cfg b/resources/quality/goofoo/petg/goofoo_near_0.40_petg_fine.inst.cfg index 3a1afe0da8..b0318edce2 100644 --- a/resources/quality/goofoo/petg/goofoo_near_0.40_petg_fine.inst.cfg +++ b/resources/quality/goofoo/petg/goofoo_near_0.40_petg_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_petg diff --git a/resources/quality/goofoo/petg/goofoo_near_0.40_petg_standard.inst.cfg b/resources/quality/goofoo/petg/goofoo_near_0.40_petg_standard.inst.cfg index dfc3242624..02d54aae5e 100644 --- a/resources/quality/goofoo/petg/goofoo_near_0.40_petg_standard.inst.cfg +++ b/resources/quality/goofoo/petg/goofoo_near_0.40_petg_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_petg diff --git a/resources/quality/goofoo/petg/goofoo_open_0.40_petg_fine.inst.cfg b/resources/quality/goofoo/petg/goofoo_open_0.40_petg_fine.inst.cfg index c90206a6bf..01b84a0660 100644 --- a/resources/quality/goofoo/petg/goofoo_open_0.40_petg_fine.inst.cfg +++ b/resources/quality/goofoo/petg/goofoo_open_0.40_petg_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_petg diff --git a/resources/quality/goofoo/petg/goofoo_open_0.40_petg_standard.inst.cfg b/resources/quality/goofoo/petg/goofoo_open_0.40_petg_standard.inst.cfg index ef8aca3bcc..25a007b76f 100644 --- a/resources/quality/goofoo/petg/goofoo_open_0.40_petg_standard.inst.cfg +++ b/resources/quality/goofoo/petg/goofoo_open_0.40_petg_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_petg diff --git a/resources/quality/goofoo/petg/goofoo_small_0.40_petg_fine.inst.cfg b/resources/quality/goofoo/petg/goofoo_small_0.40_petg_fine.inst.cfg index 3f10db1e3b..0419249623 100644 --- a/resources/quality/goofoo/petg/goofoo_small_0.40_petg_fine.inst.cfg +++ b/resources/quality/goofoo/petg/goofoo_small_0.40_petg_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_petg diff --git a/resources/quality/goofoo/petg/goofoo_small_0.40_petg_standard.inst.cfg b/resources/quality/goofoo/petg/goofoo_small_0.40_petg_standard.inst.cfg index 2e32f555f7..1d6e4054bc 100644 --- a/resources/quality/goofoo/petg/goofoo_small_0.40_petg_standard.inst.cfg +++ b/resources/quality/goofoo/petg/goofoo_small_0.40_petg_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_petg diff --git a/resources/quality/goofoo/pla/goofoo_far_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_0.40_pla_draft.inst.cfg index 4c14da8745..8aa2951c69 100644 --- a/resources/quality/goofoo/pla/goofoo_far_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_0.40_pla_efine.inst.cfg index 0f6d81fbe8..154f5f11dc 100644 --- a/resources/quality/goofoo/pla/goofoo_far_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_0.40_pla_fine.inst.cfg index 0bfc6d2819..6738fb9328 100644 --- a/resources/quality/goofoo/pla/goofoo_far_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_0.40_pla_standard.inst.cfg index 08daac76c9..6d92442cf4 100644 --- a/resources/quality/goofoo/pla/goofoo_far_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_draft.inst.cfg index bec333ff61..0e9cc15b66 100644 --- a/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_bronze_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_efine.inst.cfg index 2dcb5005a8..af4ec218ac 100644 --- a/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_bronze_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_fine.inst.cfg index 8c02d54220..8f43e8e7e2 100644 --- a/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_bronze_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_standard.inst.cfg index de1c7e4370..9a0f3ac0b6 100644 --- a/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_bronze_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_bronze_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_draft.inst.cfg index cefc9daff7..1e08ec4c77 100644 --- a/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_efine.inst.cfg index 4943789a1b..5aa60c2973 100644 --- a/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_fine.inst.cfg index 789b01f664..27178c5c65 100644 --- a/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_standard.inst.cfg index e09c2c21e5..d0488d80bb 100644 --- a/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_draft.inst.cfg index 74e6028b99..4becebdf46 100644 --- a/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_efine.inst.cfg index c5568f6b31..e452a36171 100644 --- a/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_fine.inst.cfg index 9ba19e5450..8a03feb977 100644 --- a/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_standard.inst.cfg index 62e89c7d9f..febde174d8 100644 --- a/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_draft.inst.cfg index 3be7cca700..fb909e38cb 100644 --- a/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_efine.inst.cfg index 30ebb39fe1..8238984d2c 100644 --- a/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_fine.inst.cfg index 632183e93b..7883269375 100644 --- a/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_standard.inst.cfg index 44d5f75516..8370c63ba9 100644 --- a/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_0.40_pla_draft.inst.cfg index 8ffd6be2e5..fdefd67acf 100644 --- a/resources/quality/goofoo/pla/goofoo_near_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_0.40_pla_efine.inst.cfg index f167eedae4..3282cf0173 100644 --- a/resources/quality/goofoo/pla/goofoo_near_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_0.40_pla_fine.inst.cfg index 977d3d710c..49611733fb 100644 --- a/resources/quality/goofoo/pla/goofoo_near_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_0.40_pla_standard.inst.cfg index 6c0c253942..3c44b1f90e 100644 --- a/resources/quality/goofoo/pla/goofoo_near_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_draft.inst.cfg index dab701a87d..0c454d674a 100644 --- a/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_bronze_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_efine.inst.cfg index ce26c1077e..877cbcf399 100644 --- a/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_bronze_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_fine.inst.cfg index f6ba35e5e0..d87a398d61 100644 --- a/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_bronze_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_standard.inst.cfg index 8ef8bc753d..b77ac1f183 100644 --- a/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_bronze_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_draft.inst.cfg index ac3191b711..ea64822186 100644 --- a/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_efine.inst.cfg index fd8b3cf81b..06223bb55d 100644 --- a/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_fine.inst.cfg index 671ea1db9d..239a3e3742 100644 --- a/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_standard.inst.cfg index f1677653cf..c29e6a8cbc 100644 --- a/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_draft.inst.cfg index a719640114..32da766309 100644 --- a/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_efine.inst.cfg index fc71303ce1..dd2447f2d4 100644 --- a/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_fine.inst.cfg index e92bcff3b2..440d1533fd 100644 --- a/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_standard.inst.cfg index 5666f3abea..0b9cba8b35 100644 --- a/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_draft.inst.cfg index 61c824e3f5..429b401321 100644 --- a/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_efine.inst.cfg index d1beccaf4c..68fb68a880 100644 --- a/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_fine.inst.cfg index 42a4c8b9be..2925960417 100644 --- a/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_standard.inst.cfg index a6a49094cf..8038f8737b 100644 --- a/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_0.40_pla_draft.inst.cfg index 6bbddd28a8..1e0a789cf2 100644 --- a/resources/quality/goofoo/pla/goofoo_open_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_0.40_pla_efine.inst.cfg index ca9144388e..ead2dc9de0 100644 --- a/resources/quality/goofoo/pla/goofoo_open_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_0.40_pla_fine.inst.cfg index e2db78058a..d5a056cd2c 100644 --- a/resources/quality/goofoo/pla/goofoo_open_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_0.40_pla_standard.inst.cfg index ffade74aaa..4a9be1f477 100644 --- a/resources/quality/goofoo/pla/goofoo_open_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_draft.inst.cfg index dd2377e171..2233df389a 100644 --- a/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_efine.inst.cfg index 1b50f1fff1..7aa0c76692 100644 --- a/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_fine.inst.cfg index 16def63088..4d9238565e 100644 --- a/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_standard.inst.cfg index 88ebb60b5d..5e25208a82 100644 --- a/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_draft.inst.cfg index 569203d3a9..d5d304a405 100644 --- a/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_efine.inst.cfg index e1b02e7a5b..fcb34f65e4 100644 --- a/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_fine.inst.cfg index f199f3a27d..34f29358ce 100644 --- a/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_standard.inst.cfg index ac2ce648a6..8f6ccee841 100644 --- a/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_draft.inst.cfg index a8f9e3b277..fe696a1b69 100644 --- a/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_efine.inst.cfg index 4b8c022cfd..cf87f8bf6a 100644 --- a/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_fine.inst.cfg index 9260779304..29970949ee 100644 --- a/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_standard.inst.cfg index 6067154670..3e4e45d87a 100644 --- a/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_0.40_pla_draft.inst.cfg index fe3e712095..96d364a4fb 100644 --- a/resources/quality/goofoo/pla/goofoo_small_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_0.40_pla_efine.inst.cfg index 0b4cc8c33d..25a687d2ac 100644 --- a/resources/quality/goofoo/pla/goofoo_small_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_0.40_pla_fine.inst.cfg index a2ef9571d1..0a7c292ad2 100644 --- a/resources/quality/goofoo/pla/goofoo_small_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_0.40_pla_standard.inst.cfg index e5ae17b358..014d41b2fe 100644 --- a/resources/quality/goofoo/pla/goofoo_small_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_draft.inst.cfg index 43436b1fe2..890df61b70 100644 --- a/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_efine.inst.cfg index ad61ac4516..d7a76365dc 100644 --- a/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_fine.inst.cfg index 982a051025..4525b37e25 100644 --- a/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_standard.inst.cfg index e1947d3b2c..28ce12536a 100644 --- a/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_emarble_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_emarble_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_draft.inst.cfg index e89f7ef398..d01ac81bcd 100644 --- a/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_efine.inst.cfg index 3986432256..90a3519945 100644 --- a/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_fine.inst.cfg index 6bc74a4fd9..d7171082c9 100644 --- a/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_standard.inst.cfg index 5546fc6c04..035b8e7483 100644 --- a/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_esilk_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_esilk_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_draft.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_draft.inst.cfg index 9983ca25e0..e109a03c6d 100644 --- a/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_draft.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_efine.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_efine.inst.cfg index 72e9b1aed2..695c59f212 100644 --- a/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_efine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_fine.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_fine.inst.cfg index 5c4bbbd840..4180a759ca 100644 --- a/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_fine.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_standard.inst.cfg b/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_standard.inst.cfg index 6c5bce0bf0..57db41164d 100644 --- a/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_standard.inst.cfg +++ b/resources/quality/goofoo/pla/goofoo_small_wood_0.40_pla_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_small [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_wood_pla diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg index 52b57f65b9..317cbe7dce 100644 --- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg index 8958e9c4a2..2ca7b2b196 100644 --- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg index dae9ff6d40..c2de19fe96 100644 --- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg index c8a6ab287e..21cfe20665 100644 --- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg index 7bbe273435..119a28e82a 100644 --- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg index 4af057c98c..d83bc1626e 100644 --- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg index 0d42f6fece..c1547ac172 100644 --- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg index c6a5522e78..74759a0221 100644 --- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_draft.inst.cfg b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_draft.inst.cfg index 20d31c5d3a..4f7f2d1680 100644 --- a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_draft.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_efine.inst.cfg b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_efine.inst.cfg index 0a5e9ad056..bf5a51cb4c 100644 --- a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_efine.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_fine.inst.cfg b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_fine.inst.cfg index f1bb2a1fd0..4c611dd157 100644 --- a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_fine.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_pva diff --git a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_standard.inst.cfg b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_standard.inst.cfg index 36026762ee..3794509b1a 100644 --- a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_standard.inst.cfg +++ b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_open [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_pva diff --git a/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_draft.inst.cfg b/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_draft.inst.cfg index 920e0372d7..07034bfb63 100644 --- a/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_draft.inst.cfg +++ b/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_tpe_83a diff --git a/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_efine.inst.cfg b/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_efine.inst.cfg index b8d2d3f7ea..7440b691d4 100644 --- a/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_efine.inst.cfg +++ b/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_tpe_83a diff --git a/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_fine.inst.cfg b/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_fine.inst.cfg index 176bc7f0c7..dc6545cc2b 100644 --- a/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_fine.inst.cfg +++ b/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_tpe_83a diff --git a/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_standard.inst.cfg b/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_standard.inst.cfg index 4fc798296f..559a316e32 100644 --- a/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_standard.inst.cfg +++ b/resources/quality/goofoo/tpe/goofoo_far_0.40_tpe_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_tpe_83a diff --git a/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_draft.inst.cfg b/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_draft.inst.cfg index 03c646dd37..0a31a56f9a 100644 --- a/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_draft.inst.cfg +++ b/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_tpe_83a diff --git a/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_efine.inst.cfg b/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_efine.inst.cfg index 28351b1e2c..24f8138cb8 100644 --- a/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_efine.inst.cfg +++ b/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_tpe_83a diff --git a/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_fine.inst.cfg b/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_fine.inst.cfg index 49c4e26db3..6584ddae94 100644 --- a/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_fine.inst.cfg +++ b/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_tpe_83a diff --git a/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_standard.inst.cfg b/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_standard.inst.cfg index c4f839ee74..2aee1c10ef 100644 --- a/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_standard.inst.cfg +++ b/resources/quality/goofoo/tpe/goofoo_near_0.40_tpe_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_tpe_83a diff --git a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_draft.inst.cfg b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_draft.inst.cfg index 23db02803a..995c156ed3 100644 --- a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_draft.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_tpu_87a diff --git a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_fine.inst.cfg b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_fine.inst.cfg index 4fb6d626b3..68af0a0dfd 100644 --- a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_fine.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_tpu_87a diff --git a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_standard.inst.cfg b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_standard.inst.cfg index a367b8f81c..f11371efbd 100644 --- a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_standard.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_87a_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_tpu_87a diff --git a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_draft.inst.cfg b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_draft.inst.cfg index d7aa4d5fec..3040c18120 100644 --- a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_draft.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_tpu_95a diff --git a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_efine.inst.cfg b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_efine.inst.cfg index 7e95cdb13b..72bb937b47 100644 --- a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_efine.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_tpu_95a diff --git a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_fine.inst.cfg b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_fine.inst.cfg index 5886ce5721..81f7d624be 100644 --- a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_fine.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_tpu_95a diff --git a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_standard.inst.cfg b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_standard.inst.cfg index 5643a9459a..bb8f171c7c 100644 --- a/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_standard.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_far_0.40_tpu_95a_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_far [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_tpu_95a diff --git a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_draft.inst.cfg b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_draft.inst.cfg index 7d1e632e0c..09ef566bb6 100644 --- a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_draft.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_tpu_87a diff --git a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_fine.inst.cfg b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_fine.inst.cfg index 5de2f6f438..357588eafb 100644 --- a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_fine.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_tpu_87a diff --git a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_standard.inst.cfg b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_standard.inst.cfg index 1343ea9172..782776c299 100644 --- a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_standard.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_87a_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_tpu_87a diff --git a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_draft.inst.cfg b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_draft.inst.cfg index b6e6bcb6b2..516914443e 100644 --- a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_draft.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft material = goofoo_tpu_95a diff --git a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_efine.inst.cfg b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_efine.inst.cfg index 4f8bfbfc22..0952e00567 100644 --- a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_efine.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_efine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = efine material = goofoo_tpu_95a diff --git a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_fine.inst.cfg b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_fine.inst.cfg index 1149e159b8..dba733debf 100644 --- a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_fine.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine material = goofoo_tpu_95a diff --git a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_standard.inst.cfg b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_standard.inst.cfg index 23c9cba6ef..ac533099aa 100644 --- a/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_standard.inst.cfg +++ b/resources/quality/goofoo/tpu/goofoo_near_0.40_tpu_95a_standard.inst.cfg @@ -4,7 +4,7 @@ name = Standard Quality definition = goofoo_near [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal material = goofoo_tpu_95a diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg index 94a8136dbd..25841f3f1e 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg @@ -20,7 +20,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 -line_width = 0.38 raft_airgap = 0.37 raft_base_line_spacing = 1.6 raft_base_line_width = 0.8 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg index 2ffdf91577..2bf0aea9f5 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg @@ -20,7 +20,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 -line_width = 0.38 raft_airgap = 0.37 raft_base_line_spacing = 1.6 raft_base_line_width = 0.8 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg index 017e5e29bd..85d5be2acb 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg @@ -20,7 +20,7 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 -line_width = 0.57 + raft_airgap = 0.37 raft_base_line_spacing = 2.4 raft_base_line_width = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg index 35e77d675a..e9b2983687 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg @@ -20,7 +20,7 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 -line_width = 0.57 + raft_airgap = 0.37 raft_base_line_spacing = 2.4 raft_base_line_width = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg index 59611c8857..9a8c33f1ee 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.4 / 0.38, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -66,7 +64,6 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index c1ae09474f..4e0e26b76f 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.4 / 0.38, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -66,5 +64,4 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index 2b08b7607d..8de69298cc 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.6 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg index 955f0dac4d..c2aa1f68be 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.6 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,7 +64,6 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index 739bf3b04d..23931ba527 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.8 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg index 118e4d0eba..9f8df82d07 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 infill_pattern = cubic infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.8 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg index 4212f9d837..610d19b6bb 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg @@ -19,7 +19,6 @@ cool_fan_speed_min = =cool_fan_speed * 35 / 60 cool_min_speed = 15 infill_sparse_density = 10 layer_0_z_overlap = 0.12 -line_width = 0.57 raft_airgap = 0.24 raft_base_line_spacing = 1.2 raft_base_line_width = 0.6 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg index 6d451a383c..f6aaae5840 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 -line_width = 0.38 raft_airgap = 0.37 raft_base_line_spacing = 1.6 raft_base_line_width = 0.8 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg index 9ea6b60bba..b96f0aa10e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 -line_width = 0.38 raft_airgap = 0.37 raft_base_line_spacing = 1.6 raft_base_line_width = 0.8 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg index 16dc7d7c9c..ead1063349 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 -line_width = 0.57 raft_airgap = 0.37 raft_base_line_spacing = 2.4 raft_base_line_width = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg index f6a05528d2..6b46e85906 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 8 infill_overlap = 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 -line_width = 0.57 raft_airgap = 0.37 raft_base_line_spacing = 2.4 raft_base_line_width = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg index ba43d5bcec..df39f5c02c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.4 / 0.38, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -66,7 +64,6 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg index 35ca780774..de16d949ea 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.4 / 0.38, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -66,5 +64,4 @@ support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg index 95476b7670..65851adf80 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.6 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg index ec65074c80..90ff15eab9 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.6 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,7 +64,6 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 speed_wall_x = =math.ceil(speed_print * 25 / 25) speed_infill = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg index dad4ff5ba2..70f4044233 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.8 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg index 535c2310db..6a4e5b609d 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg @@ -26,7 +26,6 @@ cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 -infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0 @@ -39,7 +38,6 @@ jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 retraction_count_max = 12 retraction_extrusion_window = 1 @@ -48,7 +46,6 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -skirt_brim_line_width = 0.8 speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 @@ -67,5 +64,4 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg index 103a0b23be..141ba84e6c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg @@ -19,7 +19,6 @@ cool_fan_speed_min = =cool_fan_speed cool_min_speed = 15 infill_sparse_density = 10 layer_0_z_overlap = 0.12 -line_width = 0.57 raft_airgap = 0.24 raft_base_line_spacing = 1.2 raft_base_line_width = 0.6 diff --git a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg index cbaaaac17b..1f5b7c74c6 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.25 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 @@ -32,4 +31,3 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index d709092cf0..066748c369 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -13,15 +13,12 @@ variant = AA 0.25 is_experimental = True [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =line_width infill_pattern = triangles infill_wipe_dist = 0.1 jerk_enabled = True @@ -52,5 +49,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index a6f33ebf61..31d15a9ba6 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -13,18 +13,15 @@ variant = AA 0.25 is_experimental = True [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 10 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.92 machine_min_cool_heat_time_window = 15 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 @@ -55,5 +52,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg index 7ceaff020c..9c72b7d858 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -15,10 +15,8 @@ variant = AA 0.25 brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 -infill_line_width = =line_width infill_overlap = 10 infill_pattern = grid -line_width = =machine_nozzle_size * 0.92 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,6 +32,4 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_line_width = =line_width -wall_line_width_x= =line_width wall_thickness = 0.7 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 9f7942674b..26eebe8b28 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -12,11 +12,8 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 80 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index 356f8e24b7..8a51169cf7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -12,11 +12,8 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 80 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index b2cbe677ca..86fe20b481 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -12,11 +12,8 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 50 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index 5ab06b36cb..f85759369f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -12,11 +12,8 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 50 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg index f4be16949f..1d7318177e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,4 +31,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg index 06eadd8ef6..99fbd8f1a1 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,4 +31,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg index 85b28c5044..d8fa4f3c28 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,4 +30,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg index 63780d2e67..b02c5dba6b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,4 +30,3 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index 8019b4ea65..a292c2cca4 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = raft brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -61,5 +59,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 179bbe2a83..f8d1c87f76 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = raft brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap_mm = 0.05 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -60,5 +58,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 76f6235728..4bb729fc4f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = raft brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -61,5 +59,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 2c5a97a7e4..9e42621db6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = raft brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -58,5 +56,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 16859e4497..13f855385c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index 937ef800cf..c5838af6a0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index cedddc57d3..edc4a19f15 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index 1f7ceeb3f6..091061b233 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 4c3b37375c..38a1fa60f9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -12,21 +12,18 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 layer_height = 0.2 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -60,5 +57,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 2fa6c35c0a..e5d7a502f3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -12,21 +12,18 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 layer_height = 0.15 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -60,5 +57,4 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index ba5e6db078..60be6bd2e8 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -12,20 +12,17 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -59,5 +56,4 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index b1bb3fb3c4..70cb2cc08f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 0.45/0.35,2) jerk_print = 25 jerk_roofing = 1 layer_height_0 = 0.2 @@ -34,5 +33,4 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg index cf782bcb33..110bb95473 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -27,6 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) wall_thickness = 1.23 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg index d702054971..380236a09a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 14aefd647c..3d07077c9c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -12,14 +12,12 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 @@ -27,7 +25,6 @@ infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 layer_height = 0.2 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -60,5 +57,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 1b20c8c454..57eef897b5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -12,14 +12,12 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 @@ -27,7 +25,6 @@ infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 layer_height = 0.15 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -61,5 +58,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 42c4a94179..aadcf96ce5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -12,21 +12,18 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -58,5 +55,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg index 78da98eba5..d2985f56e2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg index d9c13de473..68d615559a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.8 [values] layer_height = 0.4 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 30 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg index e523e70e09..ebabeb8b7e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.8 [values] layer_height = 0.3 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 27 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index 0fad63ae83..18aee2af4d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -15,8 +15,6 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 @@ -33,6 +31,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 0409bdba5b..49bd4513f7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -15,9 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True layer_height = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 @@ -34,6 +32,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index f86400bf42..438e5b294a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -15,9 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True + layer_height = 0.3 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 @@ -34,6 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg index 6bd1632658..5c4c7533f0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index 51e2d1210d..88216c6a50 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 15 layer_height = 0.4 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg index a598359638..7abba389a9 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 15 layer_height = 0.3 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index fc6a48a2f0..31a9fae6f7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 6158e3ac41..aff779c11c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 @@ -29,7 +27,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 3a6f021688..342944b069 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 @@ -29,8 +27,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 -support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg index 0a88fa2f14..2c727d5d49 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg @@ -15,8 +15,6 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +27,3 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index a12ad9d3c7..69fd0299f6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -15,9 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True + layer_height = 0.4 -line_width = =machine_nozzle_size * 0.875 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 raft_airgap = 0.5 @@ -29,4 +28,3 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg index ea519e8ce2..b457d4f40b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -15,9 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True + layer_height = 0.3 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -30,4 +29,3 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg index 2757964881..8ddaf83b3e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg index 2ee0af5a1b..525d12766a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 layer_height = 0.4 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg index 363038fe13..4a76fd24bc 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 layer_height = 0.3 -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 37fd2bacf3..e00a21d571 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,9 +16,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -33,10 +31,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 30bb84038a..bd38700ecf 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles layer_height = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -35,10 +33,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index e2341e376e..cccba67fd0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles layer_height = 0.3 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 429a2b2b7b..2c91aaa083 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,12 +16,10 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -36,16 +34,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index d026ef1012..bd8791fa98 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,12 +16,10 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -36,16 +34,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 3980068d66..f509f33d70 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -16,12 +16,10 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) layer_height = 0.3 material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -36,16 +34,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index 752c5760b1..4a8c9c3f91 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -29,9 +27,6 @@ prime_tower_enable = False retract_at_layer_change = False speed_print = 45 support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 403f54ae61..91344347da 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,8 +32,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25/ 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 30e2d750fa..dffdbf28a6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,11 +32,8 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 41ef63bf46..d09295a62f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -16,13 +16,11 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -41,7 +39,6 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) speed_travel = 300 @@ -49,7 +46,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -57,5 +53,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 6a3fba05e7..56891da283 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -16,13 +16,11 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) layer_height = 0.4 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -42,7 +40,6 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_travel = 300 @@ -50,7 +47,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -58,5 +54,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 97d78377fb..a05a640e0e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -16,13 +16,11 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) layer_height = 0.3 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -41,7 +39,6 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) speed_travel = 300 @@ -49,7 +46,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -57,5 +53,4 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg index f4a41586b8..2f7677d850 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.25 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 @@ -32,6 +31,6 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + raft_surface_speed = 45 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index edb5751e06..b19a7b9c7d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -13,15 +13,12 @@ variant = AA 0.25 is_experimental = True [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =line_width infill_pattern = triangles infill_wipe_dist = 0.1 jerk_enabled = True @@ -51,5 +48,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg index ef2cce367c..493ca436a2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,5 +19,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 wall_thickness = 0.92 initial_layer_line_width_factor = 100 -infill_before_walls = true + material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index 17131e9397..a097d692dd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -13,18 +13,15 @@ variant = AA 0.25 is_experimental = True [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 10 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.92 machine_min_cool_heat_time_window = 15 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 @@ -54,5 +51,5 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg index d50e151552..a03260d3e8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -15,10 +15,9 @@ variant = AA 0.25 brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 -infill_line_width = =line_width + infill_overlap = 10 infill_pattern = grid -line_width = =machine_nozzle_size * 0.92 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,7 +33,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_line_width = =line_width -wall_line_width_x= =line_width wall_thickness = 0.7 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg index 43a456238a..6fd7afc364 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) wall_thickness = 1 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 50 / 60) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg index a8a9a68d83..0f22b8977b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg @@ -25,7 +25,7 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 45 / 60) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg index 2e778e0ad9..3364e4720d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg @@ -24,7 +24,7 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 50) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg index ec82e4de33..93f2e1a739 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 55) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index 16adc37587..9e85a31e5e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 80 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg index 086927544d..a95e3ca53b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 80 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg index c82a701e4b..ef67add796 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 50 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg index 0d116eb04e..6f8cc41f26 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 50 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 69dc6993da..11274b2f0d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +33,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index df6754b065..626d56d1b2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +33,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index c09ee2a95a..c3b3e14dc4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index dc0c34c7b2..59eadf035b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index 5637f57c13..adf6786e83 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -59,5 +57,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index 6a79f242b9..5ae2735f2d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap_mm = 0.05 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -59,5 +57,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 6a08b61393..5085510594 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -60,5 +58,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 37167b4890..68c9a1bbec 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -58,5 +56,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index 5045b5b0ab..e12e733e3d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -28,7 +28,7 @@ top_bottom_thickness = 0.8 wall_thickness = 0.8 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + infill_sparse_density = 15 layer_height_0 = 0.2 acceleration_wall = 2000 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index 0cc2754a69..2c2a2b39a7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -27,7 +27,7 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index 0d60d544a6..c5ea2e1400 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -29,7 +29,7 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index daa75b8dd0..9636a55c61 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -25,7 +25,7 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index 2132288bfe..6142412e33 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -12,20 +12,17 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -57,5 +54,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index ca0e648e7c..e29f83ed8e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -12,20 +12,16 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -59,5 +55,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 3569786c19..cd8db42a37 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -12,20 +12,18 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -59,5 +57,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index 39fe086b64..efd14ee639 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 0.45/0.35,2) jerk_print = 25 jerk_roofing = 1 layer_height_0 = 0.2 @@ -34,5 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg index 58c582e061..deffe82cd0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -27,5 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.23 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index 6b67046216..7512adc068 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -31,6 +31,3 @@ wall_thickness = 1.23 layer_height_0 = 0.2 -line_width = =round(machine_nozzle_size * 1.025, 3) -wall_line_width_x = =line_width -infill_line_width = =line_width diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg index ba051c3da0..0c9d86f51f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index 522a574315..b985c97b11 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -12,21 +12,19 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -58,5 +56,5 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 85b643be83..03a7c8fae4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -12,21 +12,19 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -58,6 +56,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index 8d4d0a2be8..482fc42161 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -12,21 +12,19 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -57,6 +55,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg index 8cae3917a2..83307b3989 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg index 4114848e22..597a7bb4fe 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg index 0680929256..0fee66e2e4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 22 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg index f04c84f8bd..a3c1641407 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg index a229a4c0af..340c20d968 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg index b5df637996..d064920dcf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg index a1533ea905..3cb350975c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg index 246ef4cc63..91bce0f11b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg index d9259fdecc..0cf188093b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg index 2c87b43a3f..a0c3386e76 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 8f1588d6aa..687e9f371f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 533845be93..06c806d85b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg index c5e359aaf3..f291ab075a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 + + material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +29,3 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg index 513161bb05..313d31e1a3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 + + material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 raft_airgap = 0.5 @@ -28,4 +28,3 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg index 5d9fa4f2da..7bf8768c6d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 + + material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +29,3 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg index 2683dafad5..4b66d6fdaf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True @@ -24,4 +24,3 @@ speed_wall = =math.ceil(speed_print * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index ef23481606..7a2c5261e1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True @@ -25,4 +25,3 @@ speed_wall_0 = =math.ceil(speed_wall * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg index e29efed202..190f74524b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True @@ -25,4 +25,4 @@ jerk_travel = 50 cool_fan_speed = 20 layer_height_0 = 0.27 initial_layer_line_width_factor = 100 -infill_before_walls = true + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg index 9e1dff0827..30fd5c9eca 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,13 +23,9 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x - retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index 42d3a435c5..47e921703b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -26,11 +24,8 @@ material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True raft_margin = 10 support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg index 95035c6996..e9f282c87e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,11 +23,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index d83549604e..2a37bcb466 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,12 +16,12 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -36,16 +36,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index deeeb49445..15c6de5603 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,12 +16,12 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -36,16 +36,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 40d19f3f33..a035d08418 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -16,12 +16,12 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 @@ -35,16 +35,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg index a5eac8aaa8..26585acf60 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -32,9 +30,6 @@ speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) speed_wall_0 = =round(speed_print * 35 / 45) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 52df4bed2c..32eb10ae89 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,8 +32,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25/ 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 11230abb5a..d92ee73bb1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -35,9 +33,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index aaebd2c3e9..a2752126a4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -15,12 +15,10 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -39,15 +37,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -55,7 +50,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index 96dc62bfb8..bff82d1c3b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -15,13 +15,13 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -40,15 +40,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -56,7 +53,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index c816568da0..7471e5031e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -15,13 +15,13 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -39,15 +39,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -55,7 +52,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg index 0778af5eeb..db9f7a118e 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg index 0231e933f5..a4270f7c79 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg index c51fab4ee3..a675beb61e 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg index a6e0bd1744..e9003721ec 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg index c77bdd9ebf..7f692d8a8c 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg index 835d86ea59..26a2e6fae4 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg index 001959a334..4b63017464 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg index 7a055b6e29..58076ba6e9 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index be856977a8..ed376310c0 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index fe6a05e98a..69d0d5274b 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg index 2ee202a68a..07d37ef967 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg index 073d07dbef..969da49a51 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg index 3f1fd4c34e..bc65773a45 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg index 3d3e746d63..8ed2e7fb96 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index d993a5ae22..cb8264338f 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index 008ecc21e3..3bde0b6e99 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg index bddbc0a804..5d70a4654b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.25 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 @@ -32,4 +32,4 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index 9528a81950..5b33819817 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -13,15 +13,13 @@ variant = AA 0.25 is_experimental = True [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =line_width + infill_pattern = triangles infill_wipe_dist = 0.1 jerk_enabled = True @@ -51,5 +49,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg index c4d7fb98b9..5e02fba901 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,5 +19,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 wall_thickness = 0.92 initial_layer_line_width_factor = 100 -infill_before_walls = true + material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index ce92209489..d8b9738910 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -13,18 +13,16 @@ variant = AA 0.25 is_experimental = True [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 10 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.92 + machine_min_cool_heat_time_window = 15 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 @@ -54,5 +52,5 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg index 9f77222c38..cf07723ce3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -15,10 +15,10 @@ variant = AA 0.25 brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 -infill_line_width = =line_width + infill_overlap = 10 infill_pattern = grid -line_width = =machine_nozzle_size * 0.92 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_line_width = =line_width -wall_line_width_x= =line_width wall_thickness = 0.7 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index 156684593d..92e4ca53ea 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -25,8 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) wall_thickness = 1 - -infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 50 / 60) - raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg index 8ec3cf7ff6..8b3af8702f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg @@ -24,8 +24,5 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - -infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 45 / 60) - raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg index 8c2274b4f9..4d92585cdb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg @@ -24,7 +24,7 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 50) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg index 172e4fc147..5d575bfc75 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg @@ -23,6 +23,6 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 55) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index fbdb5dfb08..db713524e3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 80 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index 02d70b8418..7710a2372b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 80 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg index 7f391f689f..6313577880 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 50 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index 3148b99c74..8a757abeb5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -12,11 +12,8 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 50 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index 5a8dd34130..67f2fe4a45 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +31,5 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width - jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 76ffa690a3..b8ab1712e9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +33,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index ae67bb193b..702ccd8fcd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index fc62e4b299..89be14ed90 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index 915c5d624e..85596210a6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -12,15 +12,12 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -59,5 +56,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index c934e66e1d..7efa54f778 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap_mm = 0.05 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -59,5 +57,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index 1b2fe478b2..efd031273b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = 0.05 infill_pattern = triangles @@ -60,5 +58,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index 7049f8601d..327c2e81c4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0.1 @@ -58,5 +56,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 734501d7ae..19540fba2c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -29,7 +29,7 @@ top_bottom_thickness = 0.8 wall_thickness = 0.8 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + infill_sparse_density = 15 layer_height_0 = 0.2 acceleration_wall = 2000 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index a8a8cfd35e..29ecfb903b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -27,6 +27,6 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index 4009bfaad0..8abcd19440 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -29,6 +29,6 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 930ef3b7c7..b133cde125 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -25,6 +25,6 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index 6ebb81c560..666382da2b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -12,20 +12,18 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -57,5 +55,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index 9d4a379bd6..f503800a2f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -12,20 +12,18 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -59,5 +57,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index 959d3199d0..80f1d5c522 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -12,20 +12,18 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = tetrahedral infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -59,5 +57,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index 7373f53e33..2dd354c591 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 0.45/0.35,2) jerk_print = 25 jerk_roofing = 1 layer_height_0 = 0.2 @@ -34,5 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index 64a6a3f0a4..414002f41c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -27,5 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.23 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index a4241a45c0..c7eaaad188 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -28,9 +28,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 wall_thickness = 1.23 - layer_height_0 = 0.2 - -line_width = =round(machine_nozzle_size * 1.025, 3) -wall_line_width_x = =line_width -infill_line_width = =line_width diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index 1a2878fed2..94e5f21630 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index f2f557b8b8..9fb1c609a5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -12,21 +12,19 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -58,5 +56,5 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index 78592d5de2..1877d2b85d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -12,21 +12,19 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -58,6 +56,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 1a81413d39..15956837e7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -12,21 +12,19 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = cross_3d infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -57,6 +55,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg index 0f4e96d747..5df2bcfb82 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg index 07ebd60b2c..ebd187fc1b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg index 95dc342945..b97ae609d3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 22 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg index 5b41601923..347ffd48ac 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg @@ -15,8 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 @@ -34,6 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index 05b4f49595..0e6600bad9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg index 9c89019c81..7fe450be9b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 @@ -34,6 +34,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) + support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg index 8e31caaeb3..2d0ae892be 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg index d3a77ad844..befcdb7b3a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg index 5fa91c4ae0..b7ab4be733 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg index e6d76ed573..4b1705c084 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg index 2e197f246a..02d87b8600 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg index 2443b0dd45..a7180a4f9b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg index e95d4fc943..a2ea24662b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 + + material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +29,4 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index 8aadea2b82..539f732dfd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 + + material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 raft_airgap = 0.5 @@ -28,4 +28,4 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg index edbf13c609..8a1eb6519b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg @@ -15,8 +15,6 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +27,3 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg index 138cb73cae..ad368149c8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True @@ -24,4 +24,3 @@ speed_wall = =math.ceil(speed_print * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index 7635f1f64f..ba091c8b17 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True @@ -25,4 +25,4 @@ speed_wall_0 = =math.ceil(speed_wall * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg index 4aa2619fec..59c97e5b76 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True @@ -24,4 +24,4 @@ speed_wall = =math.ceil(speed_print * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg index 472b9443ef..dad634521b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,13 +23,9 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x - retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 2e567f9078..60964f7210 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -26,11 +24,8 @@ material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True raft_margin = 10 support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg index 3f97a63acc..240a8108f7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,11 +23,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index 1d30f3b80d..7ed303a517 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -16,12 +16,12 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -36,16 +36,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 5c6247bad8..28a67ff727 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,12 +16,12 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -36,16 +36,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) + wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index 9df8d24ede..7feb2ffdda 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -16,12 +16,12 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 @@ -35,16 +35,13 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) + wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg index 5b632ea5df..0b2e183947 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -32,9 +30,6 @@ speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) speed_wall_0 = =round(speed_print * 35 / 45) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index 5840a142b0..74b6765685 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,8 +32,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25/ 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg index 9a800ad838..0d90fa543f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = cubic layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -35,9 +33,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index 0bdf141bbd..8feb40167c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -15,12 +15,12 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = cross_3d -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -39,15 +39,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -55,7 +52,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 4fc076ea74..efa8ed52fd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -15,13 +15,13 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -40,15 +40,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -56,7 +53,5 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 603e3ffb14..30aa50b2f0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -15,13 +15,13 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) + + infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -39,15 +39,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 @@ -55,7 +52,6 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) -wall_thickness = 1.3 +wall_thickness = 1.3 jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg index 90123d5c39..9125145dae 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg index b35838edf2..bfc159f656 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg index 80bd62f36a..503980d76e 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg index 5fc9661de9..9216994d0a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg index 1b10f01a6a..fc07c21439 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg index 7aedd8dbdb..b79484e54a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg index 4d7a2ef685..8d6b4ee796 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg index 023763dfd7..b95351cde0 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index 3fb92b6f8b..abbcd3a747 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index c02df86438..06cfa6e6c5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg index 3a8c651fc0..2a69cd445c 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +27,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg index 641e4b9a6d..d754d2e6a0 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +27,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg index e035ffcad0..fb68f5abc7 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +27,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg index 70e4142e98..c32e8d446d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index 0222afd01b..058aecc495 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index 5c8c1d2b53..b12afe0366 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = triangles -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Draft.inst.cfg b/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Draft.inst.cfg index 07c2d5f7de..af76095d1c 100644 --- a/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Draft.inst.cfg +++ b/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Extra_Fine.inst.cfg index e7d9275ec1..c9dde7b714 100644 --- a/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra fine weight = 0 diff --git a/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Fine.inst.cfg b/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Fine.inst.cfg index b8090dacf7..f808457c97 100644 --- a/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Fine.inst.cfg +++ b/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = 0 diff --git a/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Normal.inst.cfg b/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Normal.inst.cfg index 67e03e9264..ba741f66c6 100644 --- a/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Normal.inst.cfg +++ b/resources/quality/weedo_x40/Extrudr/weedo_x40_0.4_extrudr_GreenTECPro_Black_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Draft.inst.cfg b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Draft.inst.cfg index c4aadcd5d5..d57f1ba198 100644 --- a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Draft.inst.cfg +++ b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Extra_Fine.inst.cfg index 32e380556e..1e9433de32 100644 --- a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra fine weight = 0 diff --git a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Fine.inst.cfg b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Fine.inst.cfg index 34d0f32df0..c025ace184 100644 --- a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Fine.inst.cfg +++ b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = 0 diff --git a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Normal.inst.cfg b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Normal.inst.cfg index 81325414de..8a400eef87 100644 --- a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Normal.inst.cfg +++ b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.4_Verbatim_BVOH_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Coarse.inst.cfg b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Coarse.inst.cfg index 69cd55c82b..c43edb8a09 100644 --- a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = 0 diff --git a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Draft.inst.cfg b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Draft.inst.cfg index e0ba8363a5..a799f51e36 100644 --- a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Draft.inst.cfg +++ b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Fine.inst.cfg b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Fine.inst.cfg index 02312a59ff..dfdbdbf435 100644 --- a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Fine.inst.cfg +++ b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = 0 diff --git a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Normal.inst.cfg b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Normal.inst.cfg index 05428608b3..8e42da1943 100644 --- a/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Normal.inst.cfg +++ b/resources/quality/weedo_x40/Verbatim/weedo_x40_0.6_Verbatim_BVOH_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Draft.inst.cfg index 443dab5a4d..b841f9a1b0 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = -1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Extra_Fine.inst.cfg index bbd34aa46c..7b66cf7370 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = extra fine
weight = 1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Fine.inst.cfg index 4215ae438f..b2a9b5bed3 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Normal.inst.cfg index 7cda1be712..e304163adf 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ABS_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Draft.inst.cfg index eb08b2103a..04d868d43b 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Extra_Fine.inst.cfg index 416a929ced..1c8641e293 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = extra fine
weight = 1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Fine.inst.cfg index 5644892df6..14b39d2796 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Normal.inst.cfg index d952bf73b7..96eae24c64 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_ASA_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Draft.inst.cfg index df71a18763..a6920b4a10 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Extra_Fine.inst.cfg index 7dbe9a82b9..ccec0a1880 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = extra fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Fine.inst.cfg index d8ca6ae7cd..c68ca07dca 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Normal.inst.cfg index 55709b70ed..1a7dc07730 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_BVOH_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Draft.inst.cfg index 99be81e1d1..ca25d44e49 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Extra_Fine.inst.cfg index d484816062..c2a919083b 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = extra fine
weight = 1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Fine.inst.cfg index 92c7d0010e..8d285a2443 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Normal.inst.cfg index cfc0b88597..59b259edfe 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_CPE_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Draft.inst.cfg index 4b5ca9ccf1..17fc90d57e 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Extra_Fine.inst.cfg index 6a683e6702..f3570e734d 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = extra fine
weight = 1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Fine.inst.cfg index 58759662c6..3d441a4a1f 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Normal.inst.cfg index 398a554a4e..4dbd40fd9b 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_HIPS_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Draft.inst.cfg index 1d51f1063e..c07b23e4fa 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Extra_Fine.inst.cfg index 88471bb008..fe10700f4d 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = extra fine
weight = 1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Fine.inst.cfg index dfc56744f6..ba71a0c022 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Normal.inst.cfg index 1a2bae6437..25d23fec05 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PETG_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Draft.inst.cfg index 62ab60b313..6f27e087fd 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Extra_Fine.inst.cfg index 2f855d9a08..17539ee078 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = extra fine
weight = 1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Fine.inst.cfg index 9eeef65911..5add99c39a 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Normal.inst.cfg index a7678cf386..842e641115 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PLA_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Draft.inst.cfg index 6a646f9f8c..05a943965a 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Extra_Fine.inst.cfg index 7a19bf4b65..f5dced00e5 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = extra fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Fine.inst.cfg index e2d322a79b..72c8418405 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Normal.inst.cfg index d35a043054..81d858dda9 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_PVA_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Draft.inst.cfg index 9622a29442..503288acf0 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Extra_Fine.inst.cfg index 871006299e..7a2a7c8a0d 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = extra fine
weight = 1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Fine.inst.cfg index ecd9c780a7..f68b46bb21 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Normal.inst.cfg index 3b2981982b..9221f423aa 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.4_generic_TPU_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Coarse.inst.cfg index 04ffd75b9e..2424c92420 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = coarse
weight = -1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Draft.inst.cfg index d5a4fadaa7..b650c77fc8 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = -1
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Fine.inst.cfg index a1201a4a81..057fbafeaa 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Normal.inst.cfg index 513a07131e..ba0c0c9c23 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ABS_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Coarse.inst.cfg index 46918697d1..7f80a0f60f 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = coarse
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Draft.inst.cfg index 39d58ad717..1f7443a1bf 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Fine.inst.cfg index 7aad6d1a3f..05e43be4fb 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Normal.inst.cfg index 421f565356..4205c83ff5 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_ASA_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Coarse.inst.cfg index ff4ded7d2e..70e6d5f996 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = coarse
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Draft.inst.cfg index 64e9dfae6b..7512de1c87 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Fine.inst.cfg index ba854c8ecc..894106e799 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Normal.inst.cfg index 5df831989f..18d7098042 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_BVOH_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Coarse.inst.cfg index 6f7c3091f8..9ddcae5f35 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = coarse
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Draft.inst.cfg index c977300848..9fa38f11b4 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Fine.inst.cfg index 19e0164b88..06b9921f59 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Normal.inst.cfg index 1c686475a9..98f207554a 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_CPE_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Coarse.inst.cfg index fe8941de05..1210b32eb8 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = coarse
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Draft.inst.cfg index 21e2a1b6e9..4a9307ffec 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Fine.inst.cfg index ac337261dd..8a814f8901 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Normal.inst.cfg index 0c2f607005..e072062299 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_HIPS_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Coarse.inst.cfg index d4d0a745b8..188cb1c8b2 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = coarse
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Draft.inst.cfg index 1a0b032854..c0749ab398 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Fine.inst.cfg index 55cf0dfd94..74064caf3d 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Normal.inst.cfg index ff1113175c..3881eab5f1 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PETG_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Coarse.inst.cfg index 4b6a4d3d67..868812a696 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = coarse
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Draft.inst.cfg index 77ad595ba6..173149b7ce 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Fine.inst.cfg index 55871cfc6f..7bcca71270 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Normal.inst.cfg index 828bf65f92..03eb3afc7d 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PLA_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Coarse.inst.cfg index eb6f7f1ca6..a907731870 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = coarse
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Draft.inst.cfg index 52fb594cde..32f2eab8c4 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Fine.inst.cfg index 7ad8674ab8..724fd01c39 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Normal.inst.cfg index 88da9a4e24..2c2cf06534 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_PVA_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Coarse.inst.cfg index 718c65f2cf..71384e5721 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = coarse
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Draft.inst.cfg index 596daa5353..47319184df 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = draft
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Fine.inst.cfg index 61d001a7eb..74b0d98a53 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = fine
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Normal.inst.cfg index b46bb588b2..4fec636ece 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.6_generic_TPU_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40
[metadata]
-setting_version = 17
+setting_version = 18
type = quality
quality_type = normal
weight = 0
diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Coarse.inst.cfg index 2002c75f39..c21fb42d01 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = -1 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Draft.inst.cfg index 8a4b76fb38..735ceb4be0 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = -1 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Extra_Coarse.inst.cfg index 7d61cef5cf..5a0d374f2c 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Normal.inst.cfg index 4847d8a809..500fa6fddf 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ABS_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Coarse.inst.cfg index a5d8b30fbc..54116760a5 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Draft.inst.cfg index 7e35f3b80d..d9a4073fb9 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Extra_Coarse.inst.cfg index d9106385b7..5578d19c03 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Normal.inst.cfg index f00f6a2619..3d5cca2969 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_ASA_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Coarse.inst.cfg index d8ce1a37c1..de875696e9 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Draft.inst.cfg index 15f4679a29..565bfeae30 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Extra_Coarse.inst.cfg index 0946b65e00..9546a539ff 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Normal.inst.cfg index a6eda81059..e00dfda819 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_BVOH_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Coarse.inst.cfg index c11ca427b1..fddc479dce 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Draft.inst.cfg index 92254a53c7..d74272f49b 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Extra_Coarse.inst.cfg index 1207984b88..c813afd4cd 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Normal.inst.cfg index 7da37e96e8..2dcc8f9cda 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_CPE_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Coarse.inst.cfg index c822d726db..3eb7e68e9f 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Draft.inst.cfg index 45c4262ff5..020d511a8e 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Extra_Coarse.inst.cfg index 597e786fad..098f95bebe 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Normal.inst.cfg index 145f3aa7a5..2f8cdbb3bc 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_HIPS_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Coarse.inst.cfg index 44c54d77ef..6d9e5c9253 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Draft.inst.cfg index 5654b772c6..d240ab5281 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Extra_Coarse.inst.cfg index b43c9fabfd..05742e512e 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Normal.inst.cfg index 0fc084099f..84ac7d5790 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PETG_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Coarse.inst.cfg index 7f61122cfc..7b23c1b842 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Draft.inst.cfg index 65219b014e..b2e5458b0b 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Extra_Coarse.inst.cfg index 216f3443b1..9ecb302670 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Normal.inst.cfg index 10b56736b5..e7caadbd53 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PLA_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Coarse.inst.cfg index 28092b3d1c..96002b0bc4 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Draft.inst.cfg index 06a4fc333e..a0fa2bb74c 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Extra_Coarse.inst.cfg index 8c6dd1018b..774fe125f8 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Normal.inst.cfg index 84d9697790..237ed2c8d2 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_PVA_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Coarse.inst.cfg index 1215bae84c..d2234f05b4 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Draft.inst.cfg index dfd72d07a4..8eac064804 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Extra_Coarse.inst.cfg index 10d9213fd5..ba36b3603b 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Normal.inst.cfg index 1d3dd98f03..2343bebcf5 100644 --- a/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_0.8_generic_TPU_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = 0 diff --git a/resources/quality/weedo_x40/weedo_x40_global_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_global_Coarse.inst.cfg index 66ae27a624..8ba216884b 100644 --- a/resources/quality/weedo_x40/weedo_x40_global_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_global_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = coarse weight = -4 diff --git a/resources/quality/weedo_x40/weedo_x40_global_Draft.inst.cfg b/resources/quality/weedo_x40/weedo_x40_global_Draft.inst.cfg index 44890f81e7..4e1bf13d9b 100644 --- a/resources/quality/weedo_x40/weedo_x40_global_Draft.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_global_Draft.inst.cfg @@ -4,7 +4,7 @@ name = Draft definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = draft weight = -4 diff --git a/resources/quality/weedo_x40/weedo_x40_global_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/weedo_x40_global_Extra_Coarse.inst.cfg index bf386f1606..b866b2d248 100644 --- a/resources/quality/weedo_x40/weedo_x40_global_Extra_Coarse.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_global_Extra_Coarse.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra coarse weight = -4 diff --git a/resources/quality/weedo_x40/weedo_x40_global_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_global_Extra_Fine.inst.cfg index f6053e2b21..0b9af140a9 100644 --- a/resources/quality/weedo_x40/weedo_x40_global_Extra_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_global_Extra_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = extra fine weight = -1 diff --git a/resources/quality/weedo_x40/weedo_x40_global_Fine.inst.cfg b/resources/quality/weedo_x40/weedo_x40_global_Fine.inst.cfg index a7824b2844..0492afc7ac 100644 --- a/resources/quality/weedo_x40/weedo_x40_global_Fine.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_global_Fine.inst.cfg @@ -4,7 +4,7 @@ name = Fine definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = fine weight = -2 diff --git a/resources/quality/weedo_x40/weedo_x40_global_Normal.inst.cfg b/resources/quality/weedo_x40/weedo_x40_global_Normal.inst.cfg index 49f4846df6..dbe46290ed 100644 --- a/resources/quality/weedo_x40/weedo_x40_global_Normal.inst.cfg +++ b/resources/quality/weedo_x40/weedo_x40_global_Normal.inst.cfg @@ -4,7 +4,7 @@ name = Normal definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = quality quality_type = normal weight = -3 diff --git a/resources/variants/crazy3dprint_base_0.40.inst.cfg b/resources/variants/crazy3dprint_base_0.40.inst.cfg index 1312e5b192..8728c046c8 100644 --- a/resources/variants/crazy3dprint_base_0.40.inst.cfg +++ b/resources/variants/crazy3dprint_base_0.40.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = crazy3dprint_base [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/crazy3dprint_cz_300_0.40.inst.cfg b/resources/variants/crazy3dprint_cz_300_0.40.inst.cfg index 4e437d874d..4ed6ea7b4b 100644 --- a/resources/variants/crazy3dprint_cz_300_0.40.inst.cfg +++ b/resources/variants/crazy3dprint_cz_300_0.40.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = crazy3dprint_cz_300 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_base_0.4.inst.cfg b/resources/variants/goofoo_base_0.4.inst.cfg index e3d0e539ef..4dc5c79378 100644 --- a/resources/variants/goofoo_base_0.4.inst.cfg +++ b/resources/variants/goofoo_base_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_base [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_e-one_0.2.inst.cfg b/resources/variants/goofoo_e-one_0.2.inst.cfg index cb7be65501..222abaa3ef 100644 --- a/resources/variants/goofoo_e-one_0.2.inst.cfg +++ b/resources/variants/goofoo_e-one_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_e-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_e-one_0.4.inst.cfg b/resources/variants/goofoo_e-one_0.4.inst.cfg index d0bb8e2dd1..1a20e9cf78 100644 --- a/resources/variants/goofoo_e-one_0.4.inst.cfg +++ b/resources/variants/goofoo_e-one_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_e-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_e-one_0.6.inst.cfg b/resources/variants/goofoo_e-one_0.6.inst.cfg index 4cb22fb14a..dab508624c 100644 --- a/resources/variants/goofoo_e-one_0.6.inst.cfg +++ b/resources/variants/goofoo_e-one_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_e-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_e-one_0.8.inst.cfg b/resources/variants/goofoo_e-one_0.8.inst.cfg index 44e4bebb4e..5607ad343a 100644 --- a/resources/variants/goofoo_e-one_0.8.inst.cfg +++ b/resources/variants/goofoo_e-one_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_e-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_e-one_1.0.inst.cfg b/resources/variants/goofoo_e-one_1.0.inst.cfg index e8ccee3a60..61953efd3d 100644 --- a/resources/variants/goofoo_e-one_1.0.inst.cfg +++ b/resources/variants/goofoo_e-one_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_e-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_gemini_0.2.inst.cfg b/resources/variants/goofoo_gemini_0.2.inst.cfg index c512cea3ef..1f09700600 100644 --- a/resources/variants/goofoo_gemini_0.2.inst.cfg +++ b/resources/variants/goofoo_gemini_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_gemini [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_gemini_0.4.inst.cfg b/resources/variants/goofoo_gemini_0.4.inst.cfg index f9cce304a2..29714eda36 100644 --- a/resources/variants/goofoo_gemini_0.4.inst.cfg +++ b/resources/variants/goofoo_gemini_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_gemini [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_gemini_0.6.inst.cfg b/resources/variants/goofoo_gemini_0.6.inst.cfg index c89168bc9d..e5e0626df4 100644 --- a/resources/variants/goofoo_gemini_0.6.inst.cfg +++ b/resources/variants/goofoo_gemini_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_gemini [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_gemini_0.8.inst.cfg b/resources/variants/goofoo_gemini_0.8.inst.cfg index 8846dc3966..9f9a3f6db0 100644 --- a/resources/variants/goofoo_gemini_0.8.inst.cfg +++ b/resources/variants/goofoo_gemini_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_gemini [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_gemini_1.0.inst.cfg b/resources/variants/goofoo_gemini_1.0.inst.cfg index bc006589d8..fed8aa09e0 100644 --- a/resources/variants/goofoo_gemini_1.0.inst.cfg +++ b/resources/variants/goofoo_gemini_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_gemini [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_giant_0.2.inst.cfg b/resources/variants/goofoo_giant_0.2.inst.cfg index 79f11d6a19..7098cfe756 100644 --- a/resources/variants/goofoo_giant_0.2.inst.cfg +++ b/resources/variants/goofoo_giant_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_giant [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_giant_0.4.inst.cfg b/resources/variants/goofoo_giant_0.4.inst.cfg index 514de79aef..2427e9f1be 100644 --- a/resources/variants/goofoo_giant_0.4.inst.cfg +++ b/resources/variants/goofoo_giant_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_giant [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_giant_0.6.inst.cfg b/resources/variants/goofoo_giant_0.6.inst.cfg index 9327fef669..c198d6b123 100644 --- a/resources/variants/goofoo_giant_0.6.inst.cfg +++ b/resources/variants/goofoo_giant_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_giant [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_giant_0.8.inst.cfg b/resources/variants/goofoo_giant_0.8.inst.cfg index ce96cafb24..2949a0aab1 100644 --- a/resources/variants/goofoo_giant_0.8.inst.cfg +++ b/resources/variants/goofoo_giant_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_giant [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_giant_1.0.inst.cfg b/resources/variants/goofoo_giant_1.0.inst.cfg index d8bac0ab65..df058f6340 100644 --- a/resources/variants/goofoo_giant_1.0.inst.cfg +++ b/resources/variants/goofoo_giant_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_giant [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_max_0.2.inst.cfg b/resources/variants/goofoo_max_0.2.inst.cfg index bdb151090b..6c465e6006 100644 --- a/resources/variants/goofoo_max_0.2.inst.cfg +++ b/resources/variants/goofoo_max_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_max [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_max_0.4.inst.cfg b/resources/variants/goofoo_max_0.4.inst.cfg index 3e550e4b79..d64c475e34 100644 --- a/resources/variants/goofoo_max_0.4.inst.cfg +++ b/resources/variants/goofoo_max_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_max [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_max_0.6.inst.cfg b/resources/variants/goofoo_max_0.6.inst.cfg index 3d14181253..e9278531df 100644 --- a/resources/variants/goofoo_max_0.6.inst.cfg +++ b/resources/variants/goofoo_max_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_max [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_max_0.8.inst.cfg b/resources/variants/goofoo_max_0.8.inst.cfg index 286a7d16d8..4a5cfb3ab2 100644 --- a/resources/variants/goofoo_max_0.8.inst.cfg +++ b/resources/variants/goofoo_max_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_max [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_max_1.0.inst.cfg b/resources/variants/goofoo_max_1.0.inst.cfg index 68aad8b62f..04fc809db4 100644 --- a/resources/variants/goofoo_max_1.0.inst.cfg +++ b/resources/variants/goofoo_max_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_max [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_mido_0.2.inst.cfg b/resources/variants/goofoo_mido_0.2.inst.cfg index 560f63048c..c6298fe114 100644 --- a/resources/variants/goofoo_mido_0.2.inst.cfg +++ b/resources/variants/goofoo_mido_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_mido [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_mido_0.4.inst.cfg b/resources/variants/goofoo_mido_0.4.inst.cfg index f87c98c1d5..0a3e6a3d60 100644 --- a/resources/variants/goofoo_mido_0.4.inst.cfg +++ b/resources/variants/goofoo_mido_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_mido [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_mido_0.6.inst.cfg b/resources/variants/goofoo_mido_0.6.inst.cfg index 61d5755106..2cc35370de 100644 --- a/resources/variants/goofoo_mido_0.6.inst.cfg +++ b/resources/variants/goofoo_mido_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_mido [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_mido_0.8.inst.cfg b/resources/variants/goofoo_mido_0.8.inst.cfg index 2d48966a05..7b81b0846c 100644 --- a/resources/variants/goofoo_mido_0.8.inst.cfg +++ b/resources/variants/goofoo_mido_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_mido [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_mido_1.0.inst.cfg b/resources/variants/goofoo_mido_1.0.inst.cfg index bfb9c8568b..b972a2e65f 100644 --- a/resources/variants/goofoo_mido_1.0.inst.cfg +++ b/resources/variants/goofoo_mido_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_mido [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_miniplus_0.2.inst.cfg b/resources/variants/goofoo_miniplus_0.2.inst.cfg index e32d06e234..448ba99150 100644 --- a/resources/variants/goofoo_miniplus_0.2.inst.cfg +++ b/resources/variants/goofoo_miniplus_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_miniplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_miniplus_0.4.inst.cfg b/resources/variants/goofoo_miniplus_0.4.inst.cfg index 256006bb7c..b9104a1551 100644 --- a/resources/variants/goofoo_miniplus_0.4.inst.cfg +++ b/resources/variants/goofoo_miniplus_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_miniplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_miniplus_0.6.inst.cfg b/resources/variants/goofoo_miniplus_0.6.inst.cfg index cc6b70810f..77308346f6 100644 --- a/resources/variants/goofoo_miniplus_0.6.inst.cfg +++ b/resources/variants/goofoo_miniplus_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_miniplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_miniplus_0.8.inst.cfg b/resources/variants/goofoo_miniplus_0.8.inst.cfg index d8e752289d..f34c8d2b4d 100644 --- a/resources/variants/goofoo_miniplus_0.8.inst.cfg +++ b/resources/variants/goofoo_miniplus_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_miniplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_miniplus_1.0.inst.cfg b/resources/variants/goofoo_miniplus_1.0.inst.cfg index e51c8b36b1..f76e70a92d 100644 --- a/resources/variants/goofoo_miniplus_1.0.inst.cfg +++ b/resources/variants/goofoo_miniplus_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_miniplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_nova_0.2.inst.cfg b/resources/variants/goofoo_nova_0.2.inst.cfg index 53815ef7a9..45c5c87b3d 100644 --- a/resources/variants/goofoo_nova_0.2.inst.cfg +++ b/resources/variants/goofoo_nova_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_nova [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_nova_0.4.inst.cfg b/resources/variants/goofoo_nova_0.4.inst.cfg index 52f45ae3b0..ee2184044b 100644 --- a/resources/variants/goofoo_nova_0.4.inst.cfg +++ b/resources/variants/goofoo_nova_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_nova [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_nova_0.6.inst.cfg b/resources/variants/goofoo_nova_0.6.inst.cfg index 3817e42ec4..ee0443a5a7 100644 --- a/resources/variants/goofoo_nova_0.6.inst.cfg +++ b/resources/variants/goofoo_nova_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_nova [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_nova_0.8.inst.cfg b/resources/variants/goofoo_nova_0.8.inst.cfg index 9b7cbe456e..f0994e4b97 100644 --- a/resources/variants/goofoo_nova_0.8.inst.cfg +++ b/resources/variants/goofoo_nova_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_nova [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_nova_1.0.inst.cfg b/resources/variants/goofoo_nova_1.0.inst.cfg index 27cde50c8e..e85dfb9ba9 100644 --- a/resources/variants/goofoo_nova_1.0.inst.cfg +++ b/resources/variants/goofoo_nova_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_nova [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_plus_0.2.inst.cfg b/resources/variants/goofoo_plus_0.2.inst.cfg index cfa5727857..5c79d73291 100644 --- a/resources/variants/goofoo_plus_0.2.inst.cfg +++ b/resources/variants/goofoo_plus_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_plus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_plus_0.4.inst.cfg b/resources/variants/goofoo_plus_0.4.inst.cfg index 3dcfd10938..7682e075c4 100644 --- a/resources/variants/goofoo_plus_0.4.inst.cfg +++ b/resources/variants/goofoo_plus_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_plus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_plus_0.6.inst.cfg b/resources/variants/goofoo_plus_0.6.inst.cfg index 7b9c243fea..1064821ffb 100644 --- a/resources/variants/goofoo_plus_0.6.inst.cfg +++ b/resources/variants/goofoo_plus_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_plus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_plus_0.8.inst.cfg b/resources/variants/goofoo_plus_0.8.inst.cfg index 1a71e694dd..8893542a24 100644 --- a/resources/variants/goofoo_plus_0.8.inst.cfg +++ b/resources/variants/goofoo_plus_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_plus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_plus_1.0.inst.cfg b/resources/variants/goofoo_plus_1.0.inst.cfg index 7cbcbf93e8..e2208bdfc5 100644 --- a/resources/variants/goofoo_plus_1.0.inst.cfg +++ b/resources/variants/goofoo_plus_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_plus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_t-one_0.2.inst.cfg b/resources/variants/goofoo_t-one_0.2.inst.cfg index a966fdc57d..e1b874aa7f 100644 --- a/resources/variants/goofoo_t-one_0.2.inst.cfg +++ b/resources/variants/goofoo_t-one_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_t-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_t-one_0.4.inst.cfg b/resources/variants/goofoo_t-one_0.4.inst.cfg index 779d75cc43..4a5b0aa9e0 100644 --- a/resources/variants/goofoo_t-one_0.4.inst.cfg +++ b/resources/variants/goofoo_t-one_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_t-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_t-one_0.6.inst.cfg b/resources/variants/goofoo_t-one_0.6.inst.cfg index 5d8e657107..e79e809e32 100644 --- a/resources/variants/goofoo_t-one_0.6.inst.cfg +++ b/resources/variants/goofoo_t-one_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_t-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_t-one_0.8.inst.cfg b/resources/variants/goofoo_t-one_0.8.inst.cfg index bbbba8ccc4..f0607fa287 100644 --- a/resources/variants/goofoo_t-one_0.8.inst.cfg +++ b/resources/variants/goofoo_t-one_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_t-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_t-one_1.0.inst.cfg b/resources/variants/goofoo_t-one_1.0.inst.cfg index 559704cec0..a3a7aeb4b9 100644 --- a/resources/variants/goofoo_t-one_1.0.inst.cfg +++ b/resources/variants/goofoo_t-one_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_t-one [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tiny_0.2.inst.cfg b/resources/variants/goofoo_tiny_0.2.inst.cfg index bf99b7570a..92abb10538 100644 --- a/resources/variants/goofoo_tiny_0.2.inst.cfg +++ b/resources/variants/goofoo_tiny_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tiny [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tiny_0.4.inst.cfg b/resources/variants/goofoo_tiny_0.4.inst.cfg index ac662dff03..d84712a365 100644 --- a/resources/variants/goofoo_tiny_0.4.inst.cfg +++ b/resources/variants/goofoo_tiny_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tiny [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tiny_0.6.inst.cfg b/resources/variants/goofoo_tiny_0.6.inst.cfg index 5336ef5524..30fe87c664 100644 --- a/resources/variants/goofoo_tiny_0.6.inst.cfg +++ b/resources/variants/goofoo_tiny_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tiny [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tiny_0.8.inst.cfg b/resources/variants/goofoo_tiny_0.8.inst.cfg index dbcb3e9820..800858230a 100644 --- a/resources/variants/goofoo_tiny_0.8.inst.cfg +++ b/resources/variants/goofoo_tiny_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tiny [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tiny_1.0.inst.cfg b/resources/variants/goofoo_tiny_1.0.inst.cfg index 4d367692c9..7cc1a7548c 100644 --- a/resources/variants/goofoo_tiny_1.0.inst.cfg +++ b/resources/variants/goofoo_tiny_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tiny [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tinyplus_0.2.inst.cfg b/resources/variants/goofoo_tinyplus_0.2.inst.cfg index 1459b6bb53..fdb2956c02 100644 --- a/resources/variants/goofoo_tinyplus_0.2.inst.cfg +++ b/resources/variants/goofoo_tinyplus_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tinyplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tinyplus_0.4.inst.cfg b/resources/variants/goofoo_tinyplus_0.4.inst.cfg index 75e32bc896..b8d3784ade 100644 --- a/resources/variants/goofoo_tinyplus_0.4.inst.cfg +++ b/resources/variants/goofoo_tinyplus_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tinyplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tinyplus_0.6.inst.cfg b/resources/variants/goofoo_tinyplus_0.6.inst.cfg index 95c71bdcf8..981d241759 100644 --- a/resources/variants/goofoo_tinyplus_0.6.inst.cfg +++ b/resources/variants/goofoo_tinyplus_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tinyplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tinyplus_0.8.inst.cfg b/resources/variants/goofoo_tinyplus_0.8.inst.cfg index b9a93a9561..5804a0a3e7 100644 --- a/resources/variants/goofoo_tinyplus_0.8.inst.cfg +++ b/resources/variants/goofoo_tinyplus_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tinyplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/goofoo_tinyplus_1.0.inst.cfg b/resources/variants/goofoo_tinyplus_1.0.inst.cfg index eab9605a3a..9aae3394cb 100644 --- a/resources/variants/goofoo_tinyplus_1.0.inst.cfg +++ b/resources/variants/goofoo_tinyplus_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = goofoo_tinyplus [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_basic3_0.2.inst.cfg b/resources/variants/renkforce_basic3_0.2.inst.cfg index 56179dde96..2340e80850 100644 --- a/resources/variants/renkforce_basic3_0.2.inst.cfg +++ b/resources/variants/renkforce_basic3_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_basic3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_basic3_0.4.inst.cfg b/resources/variants/renkforce_basic3_0.4.inst.cfg index 3d2f509215..f2032ce59a 100644 --- a/resources/variants/renkforce_basic3_0.4.inst.cfg +++ b/resources/variants/renkforce_basic3_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_basic3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_basic3_0.6.inst.cfg b/resources/variants/renkforce_basic3_0.6.inst.cfg index 6f5866df2f..8574500f58 100644 --- a/resources/variants/renkforce_basic3_0.6.inst.cfg +++ b/resources/variants/renkforce_basic3_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_basic3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_basic3_0.8.inst.cfg b/resources/variants/renkforce_basic3_0.8.inst.cfg index db1bdce2dd..d30cf768f9 100644 --- a/resources/variants/renkforce_basic3_0.8.inst.cfg +++ b/resources/variants/renkforce_basic3_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_basic3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_basic3_1.0.inst.cfg b/resources/variants/renkforce_basic3_1.0.inst.cfg index 3780573db0..b2930b4e94 100644 --- a/resources/variants/renkforce_basic3_1.0.inst.cfg +++ b/resources/variants/renkforce_basic3_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_basic3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro3_0.2.inst.cfg b/resources/variants/renkforce_pro3_0.2.inst.cfg index 40dc654978..4cee56b496 100644 --- a/resources/variants/renkforce_pro3_0.2.inst.cfg +++ b/resources/variants/renkforce_pro3_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro3_0.4.inst.cfg b/resources/variants/renkforce_pro3_0.4.inst.cfg index d92d8b58fc..49b5b2ef87 100644 --- a/resources/variants/renkforce_pro3_0.4.inst.cfg +++ b/resources/variants/renkforce_pro3_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro3_0.6.inst.cfg b/resources/variants/renkforce_pro3_0.6.inst.cfg index a32f42617f..91324cca04 100644 --- a/resources/variants/renkforce_pro3_0.6.inst.cfg +++ b/resources/variants/renkforce_pro3_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro3_0.8.inst.cfg b/resources/variants/renkforce_pro3_0.8.inst.cfg index d19df4598b..13e52e62e3 100644 --- a/resources/variants/renkforce_pro3_0.8.inst.cfg +++ b/resources/variants/renkforce_pro3_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro3_1.0.inst.cfg b/resources/variants/renkforce_pro3_1.0.inst.cfg index aa5dab10ea..da2ab0bd77 100644 --- a/resources/variants/renkforce_pro3_1.0.inst.cfg +++ b/resources/variants/renkforce_pro3_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro3 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro6_0.2.inst.cfg b/resources/variants/renkforce_pro6_0.2.inst.cfg index 1e7e4763f4..6906df0652 100644 --- a/resources/variants/renkforce_pro6_0.2.inst.cfg +++ b/resources/variants/renkforce_pro6_0.2.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro6 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro6_0.4.inst.cfg b/resources/variants/renkforce_pro6_0.4.inst.cfg index e4ddcdde3d..767eefcc71 100644 --- a/resources/variants/renkforce_pro6_0.4.inst.cfg +++ b/resources/variants/renkforce_pro6_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro6 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro6_0.6.inst.cfg b/resources/variants/renkforce_pro6_0.6.inst.cfg index 20acd99cf4..f9fa48286f 100644 --- a/resources/variants/renkforce_pro6_0.6.inst.cfg +++ b/resources/variants/renkforce_pro6_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro6 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro6_0.8.inst.cfg b/resources/variants/renkforce_pro6_0.8.inst.cfg index a9cebf4cc7..669a23e863 100644 --- a/resources/variants/renkforce_pro6_0.8.inst.cfg +++ b/resources/variants/renkforce_pro6_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro6 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/renkforce_pro6_1.0.inst.cfg b/resources/variants/renkforce_pro6_1.0.inst.cfg index cb869fef66..ac5f8aa991 100644 --- a/resources/variants/renkforce_pro6_1.0.inst.cfg +++ b/resources/variants/renkforce_pro6_1.0.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = renkforce_pro6 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg index cc53cbc39e..9927acb556 100644 --- a/resources/variants/ultimaker3_aa0.25.inst.cfg +++ b/resources/variants/ultimaker3_aa0.25.inst.cfg @@ -10,9 +10,7 @@ hardware_type = nozzle [values] brim_width = 7 -infill_line_width = 0.23 layer_height_0 = 0.17 -line_width = 0.23 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 @@ -46,6 +44,5 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 -wall_line_width_x = 0.23 wall_thickness = 1.3 xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index 580bf065af..f47eb4d600 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -9,25 +9,20 @@ type = variant hardware_type = nozzle [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 7 cool_fan_speed = 7 cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) +jerk_topbottom = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 25 / 25), 200 layer_height = 0.2 -line_width = =machine_nozzle_size machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -61,6 +56,4 @@ switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 wall_0_inset = 0 -wall_line_width_0 = =wall_line_width -wall_line_width_x = =wall_line_width wall_thickness = 2 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index bc6a47b61e..94b77470cd 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -10,9 +10,8 @@ hardware_type = nozzle [values] acceleration_enabled = True -acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) +acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500) +acceleration_support = =math.ceil(acceleration_print * 2000 / 3500) acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) brim_width = 3 @@ -20,16 +19,15 @@ cool_fan_speed = 50 cool_min_speed = 5 gradual_support_infill_step_height = 1.6 gradual_support_infill_steps = 2 -infill_line_width = =round(line_width * 0.8 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True -jerk_prime_tower = =math.ceil(jerk_print * 2 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) +jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) +jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) +jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) layer_height = 0.2 machine_min_cool_heat_time_window = 15 machine_nozzle_heat_up_speed = 1.5 @@ -77,7 +75,6 @@ support_interface_enable = True support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 1.5 support_pattern = triangles support_use_towers = False @@ -88,6 +85,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_0 = =wall_line_width -wall_line_width_x = =wall_line_width wall_thickness = 1 diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index 64510ef4e3..3eff09e428 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -9,16 +9,16 @@ type = variant hardware_type = nozzle [values] -acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) +acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500) +acceleration_support = =math.ceil(acceleration_print * 2000 / 3500) acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) cool_fan_speed_max = =cool_fan_speed gradual_support_infill_steps = 2 -jerk_prime_tower = =math.ceil(jerk_print * 2 / 25) -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) +jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) +jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) +jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 @@ -44,7 +44,6 @@ support_interface_enable = True support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 3 support_xy_distance = =round(wall_line_width_0 * 0.75, 2) support_xy_distance_overhang = =wall_line_width_0 / 2 diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg index 267082ec62..236cadc574 100644 --- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg @@ -10,9 +10,7 @@ hardware_type = nozzle [values] brim_width = 7 -infill_line_width = 0.23 layer_height_0 = 0.17 -line_width = 0.23 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 @@ -46,6 +44,5 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 -wall_line_width_x = 0.23 wall_thickness = 1.3 xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index bb77c17422..2060e96b3d 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -9,25 +9,20 @@ type = variant hardware_type = nozzle [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 7 cool_fan_speed = 7 cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) +jerk_topbottom = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 25 / 25), 20) layer_height = 0.2 -line_width = =machine_nozzle_size machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -61,6 +56,4 @@ switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 wall_0_inset = 0 -wall_line_width_0 = =wall_line_width -wall_line_width_x = =wall_line_width wall_thickness = 2 diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index 35f4e9aa05..d7ad89748c 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -10,9 +10,8 @@ hardware_type = nozzle [values] acceleration_enabled = True -acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) +acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500) +acceleration_support = =math.ceil(acceleration_print * 2000 / 3500) acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) brim_width = 3 @@ -20,16 +19,15 @@ cool_fan_speed = 50 cool_min_speed = 5 gradual_support_infill_step_height = 1.6 gradual_support_infill_steps = 2 -infill_line_width = =round(line_width * 0.8 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True -jerk_prime_tower = =math.ceil(jerk_print * 2 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) +jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) +jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) +jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) layer_height = 0.2 machine_min_cool_heat_time_window = 15 machine_nozzle_heat_up_speed = 1.5 @@ -77,7 +75,6 @@ support_interface_enable = True support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 1.5 support_pattern = triangles support_use_towers = False @@ -88,6 +85,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_0 = =wall_line_width -wall_line_width_x = =wall_line_width wall_thickness = 1 diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg index 454fdde217..c55b922e2e 100644 --- a/resources/variants/ultimaker3_extended_bb04.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg @@ -9,8 +9,8 @@ type = variant hardware_type = nozzle [values] -acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) +acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500) +acceleration_support = =math.ceil(acceleration_print * 2000 / 3500) acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) cool_fan_speed_max = =cool_fan_speed @@ -44,7 +44,6 @@ support_interface_enable = True support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 3 support_xy_distance = =round(wall_line_width_0 * 0.75, 2) support_xy_distance_overhang = =wall_line_width_0 / 2 diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg index 4d33ca5c48..5379344a9c 100644 --- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg @@ -10,9 +10,7 @@ hardware_type = nozzle [values] brim_width = 7 -infill_line_width = 0.23 layer_height_0 = 0.17 -line_width = 0.23 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 @@ -46,5 +44,4 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 -wall_line_width_x = 0.23 wall_thickness = 1.3 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index 46f92fbf68..76dae615fd 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -9,25 +9,20 @@ type = variant hardware_type = nozzle [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 7 cool_fan_speed = 7 cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) +jerk_topbottom = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 25 / 25), 20) layer_height = 0.2 -line_width = =machine_nozzle_size machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -61,6 +56,4 @@ switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 wall_0_inset = 0 -wall_line_width_0 = =wall_line_width -wall_line_width_x = =wall_line_width wall_thickness = 2 diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index b408d69cf2..b40b145f29 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -9,27 +9,24 @@ type = variant hardware_type = nozzle [values] -acceleration_enabled = True -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) +acceleration_support = =math.ceil(acceleration_print * 2000 / 3500) acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) -acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) +acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500) brim_width = 3 cool_fan_speed = 50 cool_min_speed = 5 gradual_support_infill_step_height = 1.6 gradual_support_infill_steps = 2 -infill_line_width = =round(line_width * 0.8 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True -jerk_prime_tower = =math.ceil(jerk_print * 2 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) +jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) +jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) +jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) layer_height = 0.2 machine_min_cool_heat_time_window = 15 machine_nozzle_heat_up_speed = 1.5 @@ -77,7 +74,6 @@ support_interface_enable = True support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 1.5 support_pattern = triangles support_use_towers = False @@ -88,6 +84,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_0 = =wall_line_width -wall_line_width_x = =wall_line_width wall_thickness = 1 diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg index 0734903037..704c0e3b19 100644 --- a/resources/variants/ultimaker_s3_bb04.inst.cfg +++ b/resources/variants/ultimaker_s3_bb04.inst.cfg @@ -9,16 +9,16 @@ type = variant hardware_type = nozzle [values] -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) +acceleration_support = =math.ceil(acceleration_print * 2000 / 3500) acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) -acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) +acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500) cool_fan_speed_max = =cool_fan_speed gradual_support_infill_steps = 2 -jerk_prime_tower = =math.ceil(jerk_print * 2 / 25) -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) +jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) +jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) +jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 @@ -44,7 +44,6 @@ support_interface_enable = True support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 3 support_xy_distance = =round(wall_line_width_0 * 0.75, 2) support_xy_distance_overhang = =wall_line_width_0 / 2 diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg index b2a5a46b3b..948f045866 100644 --- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg @@ -10,9 +10,7 @@ hardware_type = nozzle [values] brim_width = 7 -infill_line_width = 0.23 layer_height_0 = 0.17 -line_width = 0.23 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 @@ -46,6 +44,5 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 -wall_line_width_x = 0.23 wall_thickness = 1.3 xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index a2c7a64b20..23d379b015 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -9,25 +9,20 @@ type = variant hardware_type = nozzle [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 7 cool_fan_speed = 7 cool_fan_speed_max = 100 cool_min_speed = 5 default_material_print_temperature = 200 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) +jerk_topbottom = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 25 / 25), 20) layer_height = 0.2 -line_width = =machine_nozzle_size machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -61,6 +56,4 @@ switch_extruder_prime_speed = 20 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 wall_0_inset = 0 -wall_line_width_0 = =wall_line_width -wall_line_width_x = =wall_line_width wall_thickness = 2 diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index 6c6ac6a5c7..cf7fad4710 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -9,18 +9,15 @@ type = variant hardware_type = nozzle [values] -acceleration_enabled = True -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) +acceleration_support = =math.ceil(acceleration_print * 2000 / 3500) acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) -acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) +acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500) brim_width = 3 cool_fan_speed = 50 cool_min_speed = 5 gradual_support_infill_step_height = 1.6 gradual_support_infill_steps = 2 -infill_line_width = =round(line_width * 0.8 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 @@ -77,17 +74,14 @@ support_interface_enable = True support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 1.5 support_pattern = triangles support_use_towers = False -support_xy_distance = =round(wall_line_width_0 * 0.75, 2) +support_xy_distance = =wall_line_width_0 support_xy_distance_overhang = =wall_line_width_0 / 4 support_z_distance = 0 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_0 = =wall_line_width -wall_line_width_x = =wall_line_width wall_thickness = 1 diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg index 60822eea2e..66275ebf71 100644 --- a/resources/variants/ultimaker_s5_bb04.inst.cfg +++ b/resources/variants/ultimaker_s5_bb04.inst.cfg @@ -9,16 +9,16 @@ type = variant hardware_type = nozzle [values] -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) +acceleration_support = =math.ceil(acceleration_print * 2000 / 3500) acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) -acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) +acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500) cool_fan_speed_max = =cool_fan_speed gradual_support_infill_steps = 2 -jerk_prime_tower = =math.ceil(jerk_print * 2 / 25) -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) +jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) +jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) +jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 @@ -44,7 +44,6 @@ support_interface_enable = True support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 3 support_xy_distance = =round(wall_line_width_0 * 0.75, 2) support_xy_distance_overhang = =wall_line_width_0 / 2 diff --git a/resources/variants/weedo_x40_weedo_0.4.inst.cfg b/resources/variants/weedo_x40_weedo_0.4.inst.cfg index 9527eacf1b..20b340b04e 100644 --- a/resources/variants/weedo_x40_weedo_0.4.inst.cfg +++ b/resources/variants/weedo_x40_weedo_0.4.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/weedo_x40_weedo_0.6.inst.cfg b/resources/variants/weedo_x40_weedo_0.6.inst.cfg index 1ff9bbc5ee..79136e3324 100644 --- a/resources/variants/weedo_x40_weedo_0.6.inst.cfg +++ b/resources/variants/weedo_x40_weedo_0.6.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle diff --git a/resources/variants/weedo_x40_weedo_0.8.inst.cfg b/resources/variants/weedo_x40_weedo_0.8.inst.cfg index 6a19fd75c0..91df00e7dc 100644 --- a/resources/variants/weedo_x40_weedo_0.8.inst.cfg +++ b/resources/variants/weedo_x40_weedo_0.8.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = weedo_x40 [metadata] -setting_version = 17 +setting_version = 18 type = variant hardware_type = nozzle |