diff options
Diffstat (limited to 'resources/definitions/anycubic_i3_mega_s.def.json')
| -rw-r--r-- | resources/definitions/anycubic_i3_mega_s.def.json | 21 |
1 files changed, 13 insertions, 8 deletions
diff --git a/resources/definitions/anycubic_i3_mega_s.def.json b/resources/definitions/anycubic_i3_mega_s.def.json index bf14aed04c..2e972c78b6 100644 --- a/resources/definitions/anycubic_i3_mega_s.def.json +++ b/resources/definitions/anycubic_i3_mega_s.def.json @@ -29,7 +29,7 @@ "machine_center_is_zero": { "default_value": false }, "gantry_height": { "value": "0" }, "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, - "machine_start_gcode": { "default_value": ";Profil Homepage: https://github.com/NilsRo/Cura_Anycubic_MegaS_Profile\n\n;Slicer Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\n;Slicer info:material_bed_temperature;{material_bed_temperature}\n;Slicer info:material_bed_temperature_layer_0;{material_bed_temperature_layer_0}\n;Slicer info:material_print_temperature;{material_print_temperature}\n;Slicer info:material_print_temperature_layer_0;{material_print_temperature_layer_0}\n;Slicer info:material_flow;{material_flow}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:wall_thickness;{wall_thickness}\n;Slicer info:speed_print;{speed_print}\n;Slicer info:speed_topbottom;{speed_topbottom}\n;Slicer info:travel_speed;{travel_speed}\n;Slicer info:support;{support}\n;Slicer info:retraction_speed;{retraction_speed}\n;Slicer info:retraction_amount;{retraction_amount}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:infill_pattern;{infill_pattern}\n;Slicer info:infill_sparse_density;{infill_sparse_density}\n;Slicer info:cool_fan_enabled;{cool_fan_enabled}\n;Slicer info:cool_fan_speed;{cool_fan_speed}\n;Slicer info:sliced_at;{day} {date} {time}\nG21 ; metric values \nG90 ; absolute positioning \nM82 ; set extruder to absolute mode \nM107 ; start with the fan off \nM140 S{material_bed_temperature_layer_0} ; Start heating the bed \nG4 S60 ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0} ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500 ; BEEP heating done \nG28 X0 Y10 Z0 ; move X/Y to min endstops \nM420 S1 ; Enable leveling \nM420 Z2.0 ; Set leveling fading height to 2 mm \nG0 Z0.15 ; lift nozzle a bit \nG92 E0 ; zero the extruded length \nG1 X50 E20 F500 ; Extrude 20mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F500 ; Retract a little \nG1 X120 F4000 ; Quickly wipe away from the filament line`" }, + "machine_start_gcode": { "default_value": ";Profil Homepage: https://github.com/NilsRo/Cura_Anycubic_MegaS_Profile\n\n;Slicer Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\n;Slicer info:filament_cost;{filament_cost}\n;Slicer info:material_bed_temperature;{material_bed_temperature}\n;Slicer info:material_bed_temperature_layer_0;{material_bed_temperature_layer_0}\n;Slicer info:material_print_temperature;{material_print_temperature}\n;Slicer info:material_print_temperature_layer_0;{material_print_temperature_layer_0}\n;Slicer info:material_flow;{material_flow}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:machine_nozzle_size;{machine_nozzle_size}\n;Slicer info:wall_thickness;{wall_thickness}\n;Slicer info:speed_print;{speed_print}\n;Slicer info:speed_topbottom;{speed_topbottom}\n;Slicer info:travel_speed;{travel_speed}\n;Slicer info:support;{support}\n;Slicer info:retraction_speed;{retraction_speed}\n;Slicer info:retraction_amount;{retraction_amount}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:infill_pattern;{infill_pattern}\n;Slicer info:infill_sparse_density;{infill_sparse_density}\n;Slicer info:cool_fan_enabled;{cool_fan_enabled}\n;Slicer info:cool_fan_speed;{cool_fan_speed}\n;Slicer info:sliced_at;{day} {date} {time}\nG21 ; metric values \nG90 ; absolute positioning \nM82 ; set extruder to absolute mode \nM107 ; start with the fan off \nM140 S{material_bed_temperature_layer_0} ; Start heating the bed \nG4 S60 ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0} ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500 ; BEEP heating done \nG28 X0 Y10 Z0 ; move X/Y to min endstops \nM420 S1 ; Enable leveling \nM420 Z2.0 ; Set leveling fading height to 2 mm \nG0 Z0.15 ; lift nozzle a bit \nG92 E0 ; zero the extruded length \nG1 X50 E20 F500 ; Extrude 20mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F500 ; Retract a little \nG1 X50 F500 ; wipe away from the filament line\nG1 X100 F9000 ; Quickly wipe away from the filament line" }, "machine_end_gcode": { "default_value": "M104 S0 ; Extruder off \nM140 S0 ; Heatbed off \nM107 ; Fan off \nG91 ; relative positioning \nG1 E-5 F300 ; retract a little \nG1 Z+10 E-5 ; X-20 Y-20 F{travel_xy_speed} ; lift print head \nG28 X0 Y0 ; homing \nG1 Y180 F2000 ; reset feedrate \nM84 ; disable stepper motors \nG90 ; absolute positioning \nM300 S440 P200 ; Make Print Completed Tones \nM300 S660 P250 ; beep \nM300 S880 P300 ; beep" }, "machine_max_acceleration_x": { "value": 3000 }, @@ -47,10 +47,17 @@ "machine_max_jerk_e": { "value": 5 }, "material_diameter": { "default_value": 1.75 }, - "material_print_temperature_layer_0": { "value": "material_print_temperature + 5"}, + "material_print_temperature": { "maximum_value_warning": 260 }, + "material_print_temperature_layer_0": { "value": "material_print_temperature + 5", "maximum_value_warning": 260 }, "material_final_print_temperature": { "value": "material_print_temperature" }, + "material_bed_temperature": { "maximum_value_warning": 110 }, + "material_bed_temperature_layer_0": { "maximum_value_warning": 110 }, + "material_flow": { "value": 100 }, + "top_bottom_thickness": { "value": "layer_height_0 + layer_height * math.floor(1.2 / layer_height)" }, + "wall_thickness": { "value": "line_width * 3 if line_width < 0.6 else line_width * 2" }, + "acceleration_print": { "value": 1500 }, "acceleration_enabled": { "value": false }, "acceleration_travel": { "value": 3000 }, @@ -71,8 +78,8 @@ "speed_roofing": { "value": "speed_topbottom" }, "speed_travel": { "value": 100.0, "maximum_value_warning": 150.0, "maximum_value": 200.0 }, "speed_layer_0": { "value": "speed_topbottom if speed_topbottom < 20 else 20" }, - "speed_print_layer_0": { "value": "speed_topbottom if speed_topbottom < 20 else 20" }, - "speed_travel_layer_0": { "value": 100.0 }, + "speed_print_layer_0": { "value": "speed_layer_0" }, + "speed_travel_layer_0": { "value": "speed_travel" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_support": { "value": "speed_wall_0" }, "speed_support_interface": { "value": "speed_topbottom" }, @@ -104,7 +111,7 @@ "travel_retract_before_outer_wall": { "value": true }, "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" }, - "cool_fan_speed": { "value": 70 }, + "cool_fan_speed": { "value": 100 }, "cool_fan_speed_0": { "value": 30 }, "cool_fan_enabled": { "value": true }, @@ -137,8 +144,6 @@ "support_interface_pattern": { "value": "'grid'" }, "support_interface_skip_height": { "value": 0.2 }, "minimum_support_area": { "value": 2 }, - "minimum_interface_area": { "value": 10 }, - "top_bottom_thickness": { "value": "layer_height_0 + layer_height * math.floor(1.2 / layer_height)" }, - "wall_thickness": { "value": "line_width * 3" } + "minimum_interface_area": { "value": 10 } } } |