diff options
Diffstat (limited to 'resources/definitions/anycubic_mega_zero.def.json')
| -rw-r--r-- | resources/definitions/anycubic_mega_zero.def.json | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/resources/definitions/anycubic_mega_zero.def.json b/resources/definitions/anycubic_mega_zero.def.json new file mode 100644 index 0000000000..b0c3132858 --- /dev/null +++ b/resources/definitions/anycubic_mega_zero.def.json @@ -0,0 +1,116 @@ +{ + "version": 2, + "name": "Anycubic Mega Zero", + "inherits": "fdmprinter", + "metadata": + { + "visible": true, + "author": "kad", + "manufacturer": "Anycubic", + "file_formats": "text/x-gcode", + "platform": "anycubic_mega_zero_platform.stl", + "has_materials": true, + "has_machine_quality": true, + "preferred_quality_type": "normal", + "preferred_material": "generic_pla", + "machine_extruder_trains": + { + "0": "anycubic_mega_zero_extruder_0" + } + }, + + "overrides": + { + "machine_name": + { + "default_value": "Anycubic Mega Zero" + }, + "machine_heated_bed": + { + "default_value": false + }, + "machine_width": + { + "default_value": 220 + }, + "machine_depth": + { + "default_value": 220 + }, + "machine_height": + { + "default_value": 250 + }, + "machine_center_is_zero": + { + "default_value": false + }, + "gantry_height": + { + "value": 25 + }, + "machine_gcode_flavor": + { + "default_value": "RepRap (Marlin/Sprinter)" + }, + "machine_start_gcode": + { + "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Start heating ...\nM104 S{material_print_temperature_layer_0}\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nM117 Heating ...\nM109 S{material_print_temperature_layer_0}\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z{layer_height} F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z{layer_height} F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z{layer_height} F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F{speed_travel} ; Move over to prevent blob squish\nG1 F{speed_travel}\nG92 E0 ; Reset Extruder\nM117 Printing...\n" + }, + "machine_end_gcode": + { + "default_value": "M117 Cooling down...\nM104 S0 ; turn off extruder\nM84 ; disable motors\nM107 ; Fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positioning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n" + }, + "machine_max_feedrate_x": { "value": 500 }, + "machine_max_feedrate_y": { "value": 500 }, + "machine_max_feedrate_z": { "value": 5 }, + "machine_max_feedrate_e": { "value": 30 }, + + "machine_max_acceleration_x": { "value": 500 }, + "machine_max_acceleration_y": { "value": 500 }, + "machine_max_acceleration_z": { "value": 100 }, + "machine_max_acceleration_e": { "value": 5000 }, + "machine_acceleration": { "value": 500 }, + "acceleration_print": { "value": 500 }, + "acceleration_travel": { "value": 500 }, + "acceleration_enabled": { "value": false }, + + "machine_max_jerk_xy": { "value": 10 }, + "machine_max_jerk_z": { "value": 0.4 }, + "machine_max_jerk_e": { "value": 5 }, + "jerk_print": { "value": 10 }, + "jerk_travel": { "value": "jerk_print" }, + "jerk_travel_layer_0": { "value": "jerk_travel" }, + "jerk_enabled": { "value": false }, + + "speed_print": { "value": 50.0 }, + "speed_z_hop": { "value": "machine_max_feedrate_z" }, + + "optimize_wall_printing_order": { "value": "True" }, + "material_initial_print_temperature": { "value": "material_print_temperature" }, + "material_final_print_temperature": { "value": "material_print_temperature" }, + + "retraction_hop_enabled": { "value": "True" }, + "retraction_hop": { "value": 0.2 }, + "retraction_combing": { "default_value": "noskin" }, + "retraction_combing_max_distance": { "value": 30 }, + + "travel_avoid_other_parts": { "value": true }, + "travel_avoid_supports": { "value": true }, + "travel_retract_before_outer_wall": { "value": true }, + + "retraction_enable": { "value": true }, + "retraction_speed": { "value": 30 }, + "retraction_amount": { "value": 7 }, + "retraction_count_max": { "value": 100 }, + "retraction_extrusion_window": { "value": 10 }, + "retraction_min_travel": { "value": 1.5 }, + + "cool_fan_full_at_height": { "value": "layer_height_0" }, + "adhesion_type": { "value": "'skirt'" }, + "skirt_line_count": {"default_value": 3}, + "support_xy_distance": { "value": "wall_line_width_0 * 2" }, + "support_xy_distance_overhang": { "value": "wall_line_width_0" }, + "support_z_distance": { "value": "layer_height if layer_height > 0.1 else layer_height*2" } + } +} |