diff options
Diffstat (limited to 'resources/definitions/cocoon_create.def.json')
-rw-r--r-- | resources/definitions/cocoon_create.def.json | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/resources/definitions/cocoon_create.def.json b/resources/definitions/cocoon_create.def.json new file mode 100644 index 0000000000..a3b47361c7 --- /dev/null +++ b/resources/definitions/cocoon_create.def.json @@ -0,0 +1,79 @@ +{ + "name": "Cocoon Create", + "version": 2, + "inherits": "fdmprinter", + "metadata": { + "visible": true, + "author": "Thushan Fernando", + "manufacturer": "Cocoon Create", + "file_formats": "text/x-gcode", + "preferred_quality_type": "fine", + "has_materials": true, + "platform": "wanhao_200_200_platform.obj", + "platform_texture": "Cocoon-backplate.png", + "machine_extruder_trains": { + "0": "cocoon_create_extruder_0" + }, + "platform_offset": [ + 0, + -28, + 0 + ] + }, + "overrides": { + "machine_name": { + "default_value": "Cocoon Create" + }, + "machine_width": { + "default_value": 200 + }, + "machine_height": { + "default_value": 180 + }, + "machine_depth": { + "default_value": 200 + }, + "machine_heated_bed": { + "default_value": true + }, + "machine_gcode_flavor": { + "default_value": "RepRap (Marlin/Sprinter)" + }, + "machine_start_gcode": { + "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E3 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..." + }, + "machine_end_gcode": { + "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning" + }, + "material_diameter": { + "default_value": 1.75 + }, + "layer_height": { + "default_value": 0.10 + }, + "layer_height_0": { + "default_value": 0.2 + }, + "wall_thickness": { + "value": "0.8" + }, + "top_bottom_thickness": { + "default_value": 0.6 + }, + "speed_print": { + "default_value": 50 + }, + "support_enable": { + "default_value": true + }, + "retraction_enable": { + "default_value": true + }, + "retraction_amount": { + "default_value": 4.5 + }, + "retraction_speed": { + "default_value": 25 + } + } +}
\ No newline at end of file |