1 files changed, 46 insertions, 0 deletions
diff --git a/resources/definitions/elegoo_neptune_2.def.json b/resources/definitions/elegoo_neptune_2.def.json
new file mode 100644
index 0000000000..76dc16aec4
--- /dev/null
+++ b/resources/definitions/elegoo_neptune_2.def.json
@@ -0,0 +1,46 @@
+{
+    "name": "Neptune 2",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Toylerrr",
+        "manufacturer": "Elegoo",
+        "platform": "elegoo_neptune_2.stl",
+        "platform_offset": [0,0,0],
+        "has_machine_quality": true,
+        "preferred_quality_type": "normal",
+        "file_formats": "text/x-gcode",
+        "machine_extruder_trains":
+        {
+            "0": "elegoo_neptune2_extruder_0"
+        }
+    },
+
+    "overrides": {
+        "machine_name": {"default_value": "ELEGOO Neptune 2"},
+        "machine_width": {"default_value": 235},
+        "machine_height": {"default_value": 260},
+        "machine_depth": {"default_value": 235},
+        "machine_heated_bed": {"default_value": true},
+        "material_diameter": { "default_value": 1.75 },
+		"machine_head_with_fans_polygon": {"value": [[-30, 35], [-30, -10], [25, 35], [25, -10]]},
+		"gantry_height": {"value": 30},
+        "speed_print": { "value": 60.0 } ,
+        "z_seam_type":{"default_value": "back"},
+        "z_seam_corner":{"default_value": "z_seam_corner_weighted"},
+        "material_standby_temperature":{"default_value": 200,"settable_per_extruder": false},
+        "retraction_enable":{"default_value": true},
+        "retraction_amount":{"default_value": 5},
+        "retraction_speed":{"default_value": 70},
+        "adhesion_type":{"default_value": "skirt"},
+        "raft_margin":{"default_value": 5},
+        "raft_airgap":{"default_value": 0.25},
+        "brim_width":{"default_value": 5},
+        "skin_angles":{"default_value": [45, 135]},
+        "infill_pattern":{"default_value": "gyroid"},
+        "machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"},
+        "machine_start_gcode": {"default_value": ";simage\n;gimage\nG28 ;home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X1.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X1.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X1.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up"},
+        "machine_end_gcode": {"default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F1600 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"}
+    }
+}