diff options
Diffstat (limited to 'resources/definitions/gmax15plus_dual.def.json')
-rw-r--r-- | resources/definitions/gmax15plus_dual.def.json | 5 |
1 files changed, 2 insertions, 3 deletions
diff --git a/resources/definitions/gmax15plus_dual.def.json b/resources/definitions/gmax15plus_dual.def.json index aaba2cc55b..ea84858760 100644 --- a/resources/definitions/gmax15plus_dual.def.json +++ b/resources/definitions/gmax15plus_dual.def.json @@ -6,9 +6,8 @@ "visible": true, "author": "GTL_180109", "manufacturer": "gCreate", - "category": "Other", "file_formats": "text/x-gcode", - "platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl", + "platform": "gmax_1-5_xt-plus_s3d_full model_150707.3mf", "has_variants": true, "variants_name": "Hotend", "preferred_variant_name": "0.5mm E3D (Default)", @@ -46,7 +45,7 @@ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} T0 ; Preheat Left Extruder\nM104 S{material_print_temperature} T1 ; Preheat Right Extruder\nM109 S{material_print_temperature} T0 ; Preheat Left Extruder\nM109 S{material_print_temperature} T1 ; Preheat Right Extruder\nG91 ;relative positioning\nG90 ;absolute positioning\nM218 T1 X34.3 Y0; Set 2nd extruder offset. This can be changed later if needed\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." }, "machine_end_gcode": { "default_value": "M104 S0 T0;Left extruder off\nM104 S0 T1; Right extruder off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" }, - "wall_thickness": { "default_value": 1 }, + "wall_thickness": { "value": "1" }, "top_bottom_thickness": { "default_value": 1 } } } |