diff options
Diffstat (limited to 'resources/definitions/hctech_hc300-m1&m1h.def.json')
-rw-r--r-- | resources/definitions/hctech_hc300-m1&m1h.def.json | 82 |
1 files changed, 9 insertions, 73 deletions
diff --git a/resources/definitions/hctech_hc300-m1&m1h.def.json b/resources/definitions/hctech_hc300-m1&m1h.def.json index ce30c1c70c..188ed3e7e7 100644 --- a/resources/definitions/hctech_hc300-m1&m1h.def.json +++ b/resources/definitions/hctech_hc300-m1&m1h.def.json @@ -8,7 +8,6 @@ "manufacturer": "HCTECH", "file_formats": "text/x-gcode", "platform": "hctech_hc300-m1&m1h.3mf", - "has_variants": false, "has_machine_quality": false, "machine_extruder_trains": { "0": "hctech_hc300-m1&m1h_extruder_0" @@ -33,89 +32,26 @@ "default_value": 0.3, "maximum_value_warning": 2.0 }, + "adhesion_type": { "default_value": "skirt" }, "retraction_speed": { "default_value": 35}, - "retraction_hop_enabled": { "value": "False" }, - "retraction_hop": { "value": 0.2 }, - "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" }, - "retraction_combing_max_distance": { "value": 30 }, - "travel_avoid_other_parts": { "value": true }, "travel_avoid_supports": { "value": true }, "travel_retract_before_outer_wall": { "value": true }, - "retraction_enable": { "value": true }, - "retraction_count_max": { "value": 100 }, - "retraction_extrusion_window": { "value": 10 }, - "retraction_min_travel": { "value": 1.5 }, - "adhesion_type": { "default_value": "skirt" }, - "gantry_height": { "value": "30" }, + "gantry_height": { "value": "55" }, "speed_print": { "default_value": 60.0 } , - "speed_infill": { "value": "speed_print" }, - "speed_wall": { "value": "speed_print / 2" }, - "speed_wall_0": { "value": "speed_wall" }, - "speed_wall_x": { "value": "speed_wall" }, - "speed_topbottom": { "value": "speed_print / 2" }, - "speed_roofing": { "value": "speed_topbottom" }, - "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" }, - "speed_layer_0": { "value": 30.0 }, - "speed_print_layer_0": { "value": "speed_layer_0" }, - "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" }, - "speed_prime_tower": { "value": "speed_topbottom" }, - "speed_support": { "value": "speed_wall_0" }, - "speed_support_interface": { "value": "speed_topbottom" }, - "speed_z_hop": { "value": 5 }, - "machine_max_feedrate_x": { "value": 100 }, - "machine_max_feedrate_y": { "value": 100 }, - "machine_max_feedrate_z": { "value": 30 }, - "machine_max_feedrate_e": { "value": 50 }, - "machine_max_acceleration_x": { "default_value": 2000 }, - "machine_max_acceleration_y": { "default_value": 2000 }, - "machine_max_acceleration_z": { "default_value": 100 }, - "machine_max_acceleration_e": { "default_value": 2000 }, - "machine_max_jerk_xy": { "default_value": 5.0 }, - "machine_max_jerk_z": { "default_value": 0.4 }, - "machine_max_jerk_e": { "default_value": 5.0 }, + "material_diameter": { "default_value": 1.75 }, - "acceleration_print": { "value": 1000 }, - "acceleration_travel": { "value": 1500 }, + "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, - "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG1 X315 Y70 F3000 ;clean nozzle\nG1 X330 Y150 F5000\nG1 X315 Y70\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG1 X300 Y150 Z5\nG12\nG29 ;Measure the bed\nM500 ;Store parameters" }, - "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 ;clean nozzle\nG1 X5 Y300 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" }, - "wall_line_count": { "value": 3 }, - "top_bottom_thickness": { "default_value": 1 }, + "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG29 ; Measure the bed\nM500 ; Store to EEPROM\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" }, + "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 P1;clean nozzle\nG1 X5 Y300 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" }, + "cool_fan_speed": { "value": 75 }, - "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" }, "cool_fan_enabled": { "value": true }, - "cool_min_layer_time": { "value": 10 }, - "brim_replaces_support": { "value": false }, - "skirt_gap": { "value": 2 }, - "skirt_line_count": { "default_value": 3 }, - "switch_extruder_retraction_amount": { "value": 2 }, - "switch_extruder_retraction_speeds": { "default_value": 35 }, - "prime_tower_enable": { "default_value": true }, - "infill_pattern": { "value": "triangles" }, - "initial_layer_line_width_factor": { "default_value": 120.0 }, + "line_width": { "value": 0.38 }, "travel_avoid_distance": { "value": 1 }, - "infill_overlap": { "value": 35.0 }, - "skin_overlap": { "value": 10.0 }, - "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" }, - "support_pattern": { "value": "'zigzag'" }, - "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" }, - "support_use_towers": { "value": false }, - "support_xy_distance": { "value": "wall_line_width_0 * 2" }, - "support_xy_distance_overhang": { "value": "wall_line_width_0" }, - "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" }, - "support_top_distance": { "value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance') + (layer_height if support_structure == 'tree' else 0)"}, - "support_xy_overrides_z": { "value": "'xy_overrides_z'" }, - "support_wall_count": { "value": 1 }, - "support_brim_enable": { "value": true }, - "support_brim_width": { "value": 4 }, - - "support_interface_enable": { "value": true }, - "support_interface_height": { "value": "layer_height * 4" }, - "support_interface_density": { "value": 30 }, - "support_interface_pattern": { "value": "'grid'" }, - "support_interface_skip_height": { "value": 0.2 } + "infill_before_walls": { "value": false } } } |