diff options
Diffstat (limited to 'resources/definitions/hctech_hc300-m3.def.json')
| -rw-r--r-- | resources/definitions/hctech_hc300-m3.def.json | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/resources/definitions/hctech_hc300-m3.def.json b/resources/definitions/hctech_hc300-m3.def.json new file mode 100644 index 0000000000..cbbae35cfa --- /dev/null +++ b/resources/definitions/hctech_hc300-m3.def.json @@ -0,0 +1,58 @@ +{ + "version": 2, + "name": "HCTECH_HC300-M3", + "inherits": "fdmprinter", + "metadata": { + "visible": true, + "author": "HCTECH", + "manufacturer": "HCTECH", + "file_formats": "text/x-gcode", + "platform": "hctech_hc300-m3.3mf", + "has_machine_quality": false, + "machine_extruder_trains": { + "0": "hctech_hc300-m3_extruder_0" + } + }, + + "overrides": { + "machine_head_with_fans_polygon": + { "default_value": [ + [-49, 36], + [-36, -29], + [36, -29], + [36, 49] + ] + }, + "machine_name": { "default_value": "HCTECH HC300-M3" }, + "machine_extruder_count": { "default_value": 1 }, + "machine_heated_bed": { "default_value": true }, + "machine_width": { "default_value": 300 }, + "machine_depth": { "default_value": 300 }, + "machine_height": { "default_value": 300 }, + "machine_center_is_zero": { "default_value": false }, + "retraction_amount": { + "default_value": 3, + "maximum_value_warning": 8 + }, + "adhesion_type": { "default_value": "skirt" }, + "retraction_speed": { "default_value": 35}, + "travel_avoid_supports": { "value": true }, + "travel_retract_before_outer_wall": { "value": true }, + "retraction_enable": { "value": true }, + + "gantry_height": { "value": "55" }, + "speed_print": { "default_value": 60.0 } , + + "material_diameter": { "default_value": 1.75 }, + "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, + "machine_start_gcode": { "default_value": "G28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG29 ; Measure the bed\nM500 ; Store to EEPROM\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" }, + "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 Z1 E-2 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG1 X5 Y290 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z" }, + + "cool_fan_speed": { "value": 75 }, + "cool_fan_enabled": { "value": true }, + + "line_width": { "value": 0.38 }, + "travel_avoid_distance": { "value": 1 }, + "infill_before_walls": { "value": false } + } +} |