diff options
Diffstat (limited to 'resources/definitions/imade3d_jellybox.def.json')
| -rw-r--r-- | resources/definitions/imade3d_jellybox.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/imade3d_jellybox.def.json b/resources/definitions/imade3d_jellybox.def.json index f8077f2e95..86b34bfd5c 100644 --- a/resources/definitions/imade3d_jellybox.def.json +++ b/resources/definitions/imade3d_jellybox.def.json @@ -32,7 +32,7 @@ "machine_center_is_zero": { "default_value": false }, "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { - "default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n; Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n; sliced for : {machine_name}\n; nozzle diameter : {machine_nozzle_size}\n; filament diameter : {material_diameter}\n; layer height : {layer_height}\n; 1st layer height : {layer_height_0}\n; line width : {line_width}\n; outer wall wipe dist. : {wall_0_wipe_dist}\n; infill line width : {infill_line_width}\n; wall thickness : {wall_thickness}\n; top thickness : {top_thickness}\n; bottom thickness : {bottom_thickness}\n; infill density : {infill_sparse_density}\n; infill pattern : {infill_pattern}\n; print temperature : {material_print_temperature}\n; 1st layer print temp. : {material_print_temperature_layer_0}\n; heated bed temperature : {material_bed_temperature}\n; 1st layer bed temp. : {material_bed_temperature_layer_0}\n; regular fan speed : {cool_fan_speed_min}\n; max fan speed : {cool_fan_speed_max}\n; retraction amount : {retraction_amount}\n; retr. retract speed : {retraction_retract_speed}\n; retr. prime speed : {retraction_prime_speed}\n; build plate adhesion : {adhesion_type}\n; support ? {support_enable}\n; spiralized ? {magic_spiralize}\n\nM117 Preparing ;write Preparing\nM140 S{material_bed_temperature_layer_0} ;set bed temperature and move on\nM104 S{material_print_temperature_layer_0} ;set extruder temperature and move on\nM206 X10.0 Y0.0 ;set x homing offset for default bed leveling\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nM82 ;set extruder to absolute mode\nG28 ;home all axes\nM203 Z4 ;slow Z speed down for greater accuracy when probing\nG29 ;auto bed leveling procedure\nM203 Z7 ;pick up z speed again for printing\nM190 S{material_bed_temperature_layer_0} ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature_layer_0} ;wait for the extruder to reach desired temperature\nG92 E0 ;reset the extruder position\nG1 F1500 E15 ;extrude 15mm of feed stock\nG92 E0 ;reset the extruder position again\nM117 Print starting ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n" + "default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n; Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n; sliced for : {machine_name}\n; nozzle diameter : {machine_nozzle_size}\n; filament diameter : {material_diameter}\n; layer height : {layer_height}\n; 1st layer height : {layer_height_0}\n; line width : {line_width}\n; outer wall wipe dist. : {wall_0_wipe_dist}\n; infill line width : {infill_line_width}\n; wall thickness : {wall_thickness}\n; top thickness : {top_thickness}\n; bottom thickness : {bottom_thickness}\n; infill density : {infill_sparse_density}\n; infill pattern : {infill_pattern}\n; print temperature : {material_print_temperature}\n; 1st layer print temp. : {material_print_temperature_layer_0}\n; heated bed temperature : {material_bed_temperature}\n; 1st layer bed temp. : {material_bed_temperature_layer_0}\n; regular fan speed : {cool_fan_speed_min}\n; max fan speed : {cool_fan_speed_max}\n; retraction amount : {retraction_amount}\n; retr. retract speed : {retraction_retract_speed}\n; retr. prime speed : {retraction_prime_speed}\n; build plate adhesion : {adhesion_type}\n; support ? {support_enable}\n; spiralized ? {magic_spiralize}\n\nM117 Preparing ;write Preparing\nM140 S{material_bed_temperature_layer_0} ;set bed temperature and move on\nM109 S{material_print_temperature} ; wait for the extruder to reach desired temperature\nM206 X10.0 Y0.0 ;set x homing offset for default bed leveling\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nM82 ;set extruder to absolute mode\nG28 ;home all axes\nM203 Z4 ;slow Z speed down for greater accuracy when probing\nG29 ;auto bed leveling procedure\nM203 Z7 ;pick up z speed again for printing\nM190 S{material_bed_temperature_layer_0} ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature_layer_0} ;wait for the extruder to reach desired temperature\nG92 E0 ;reset the extruder position\nG1 F1500 E15 ;extrude 15mm of feed stock\nG92 E0 ;reset the extruder position again\nM117 Print starting ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n" }, "machine_end_gcode": { "default_value": "\n;---------------------------------\n;;; Jellybox End Script Begin ;;;\n;_________________________________\nM117 Finishing Up ;write Finishing Up\n\nM104 S0 ;extruder heater off\nM140 S0 ;bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG28 X ;home x, so the head is out of the way\nG1 Y100 ;move Y forward, so the print is more accessible\nM84 ;steppers off\n\nM117 Print finished ;write Print finished\n;---------------------------------------\n;;; Jellybox End Script End ;;;\n;_______________________________________" |