diff options
Diffstat (limited to 'resources/definitions/predator.def.json')
| -rw-r--r-- | resources/definitions/predator.def.json | 72 |
1 files changed, 72 insertions, 0 deletions
diff --git a/resources/definitions/predator.def.json b/resources/definitions/predator.def.json new file mode 100644 index 0000000000..a8f4e56fe1 --- /dev/null +++ b/resources/definitions/predator.def.json @@ -0,0 +1,72 @@ +{
+ "version": 2,
+ "name": "Anycubic Predator",
+ "inherits": "fdmprinter",
+ "metadata": {
+ "author": "ksihota",
+ "manufacturer": "Anycubic",
+ "file_formats": "text/x-gcode",
+ "platform": "predator_platform.stl",
+ "platform_texture": "anycubic_predator.png",
+ "supports_usb_connection": true,
+ "visible": true,
+ "platform_offset": [0, 0, 0],
+ "has_materials": true,
+ "has_variants": false,
+ "has_machine_materials": false,
+ "has_variant_materials": false,
+ "has_machine_quality": true,
+ "quality_definition": "predator",
+ "preferred_quality_type": "normal",
+ "machine_extruder_trains":
+ {
+ "0": "predator_extruder_0"
+ }
+ },
+
+ "overrides": {
+ "machine_start_gcode":
+ {
+ "default_value": "G21 ;metric values \nG90 ;absolute positioning \nM82 ;set extruder to absolute mode \nM107 ;start with the fan off \nG28 ;Home \nG1 Z15.0 F1000;short move \nG92 E0 ;zero the extruded length \nG1 F200 E3 ;extrude 3mm of feed stock adjust so I don't have to remove any filament \nG92 E0 ;zero the extruded length again \nG1 F4000 ;move to bed \n;Put printing message on LCD screen \nM117 Printing... \n;G5; this is in order to resume on Power failure (only works on SD prints)"
+ },
+ "machine_end_gcode":
+ {
+ "default_value": "M104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off \nG91 ;relative positioning \nG92 E0 ;zero the extruded length \nG1 E-2 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure \nG92 E0 ;zero the extruded length \n;M107 ;fan off \nG1 Z+0.5 E-5 ;move Z up a bit and retract filament even more \n;G1 X0.0 Y0.0 Z455.0 F4500 \nG28 ;Home all axes (max endstops) \nG90 ;absolute positioning \n;M109 S60 ; wait for extruder temp to drop to 60 \n;M84 ;steppers off \n;M81 ;turn off printer"
+ },
+ "gantry_height": {
+ "value": 455
+ },
+ "machine_width": { "default_value": 370 },
+ "machine_depth": { "default_value": 370 },
+ "machine_height": { "default_value": 455 },
+ "machine_heated_bed": { "default_value": true },
+ "machine_shape": { "default_value": "elliptic" },
+ "machine_center_is_zero": { "default_value": true },
+ "machine_nozzle_size": {
+ "default_value": 0.4,
+ "minimum_value": 0.15,
+ "maximum_value": 0.80
+ },
+ "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
+ "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
+ "material_bed_temperature_layer_0": { "value": "material_bed_temperature + 5" },
+ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+ "machine_max_feedrate_x": { "default_value": 150 },
+ "machine_max_feedrate_y": { "default_value": 150 },
+ "machine_max_feedrate_z": { "default_value": 150 },
+ "machine_max_feedrate_e": { "default_value": 50 },
+ "machine_max_acceleration_x": { "default_value": 800 },
+ "machine_max_acceleration_y": { "default_value": 800 },
+ "machine_max_acceleration_z": { "default_value": 800 },
+ "machine_max_acceleration_e": { "default_value": 10000 },
+ "machine_acceleration": { "default_value": 3000 },
+ "machine_max_jerk_xy": { "default_value": 20 },
+ "machine_max_jerk_z": { "default_value": 20 },
+ "machine_max_jerk_e": { "default_value": 5},
+ "retraction_amount": { "default_value": 4 },
+ "retraction_speed": { "default_value": 50 },
+ "retraction_hop_enabled": { "default_value": false },
+ "retract_at_layer_change": { "default_value": true },
+ "coasting_enable": { "default_value": true }
+ }
+}
\ No newline at end of file |