diff options
Diffstat (limited to 'resources/definitions/tronxy_d01.def.json')
-rw-r--r-- | resources/definitions/tronxy_d01.def.json | 12 |
1 files changed, 2 insertions, 10 deletions
diff --git a/resources/definitions/tronxy_d01.def.json b/resources/definitions/tronxy_d01.def.json index ff8badd355..6a752656f7 100644 --- a/resources/definitions/tronxy_d01.def.json +++ b/resources/definitions/tronxy_d01.def.json @@ -5,7 +5,6 @@ "metadata": { "quality_definition": "tronxy_x", "visible": true, - "author": "AdderMk2", "platform": "tronxy.stl" }, "overrides": { @@ -22,16 +21,9 @@ }, "gantry_height": { "value": 30 }, - "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y220.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y220.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish" }, + "machine_start_gcode": { "default_value": "; D01 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y200.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y200.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish" }, + "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" }, - "machine_max_feedrate_x": { "value": 150 }, - "machine_max_feedrate_y": { "value": 150 }, - "machine_max_feedrate_z": { "value": 20 }, - "machine_max_feedrate_e": { "value": 120 }, - "machine_max_acceleration_x": { "value": 150 }, - "machine_max_acceleration_y": { "value": 150 }, - "machine_max_acceleration_z": { "value": 150 }, - "machine_max_acceleration_e": { "value": 150 }, "machine_acceleration": { "value": 120 } } } |